CFT Vo-tech '08-09 4/23/08 9:58 PM Page 1

Technical Education

2008-2009 Catalog

Also featuring:

Promo on Pages 62-63

Authorized Craftsman Industrial Distributor CFT Vo-tech '08-09 4/23/08 9:58 PM Page 2

Rely on the Craftsman® warranty throughout your career.

Craftsman tools work hard because you need them to. All Craftsman tools are backed by comprehensive warranties, and our mechanics hand tools have a Craftsman Hand Tool Full warranty.* Just bring your tools to your authorized Craftsman distributor for repair or replacement. See the warranty section for details about Craftsman world-class product warranties. It’s one more reason you can trust any job to Craftsman.

*Warranties vary by product. For full warranty details, see your Authorized Craftsman Industrial Distributor.

Contents Pages

Craftsman® Tool Sets 2–29 Craftsman® Tool Storage 30–33 Armstrong® Tools 34–36 GearWrench® Tools 37–47 KD® Tools 48–58 Product Warranties 59–61 Student Promotional Offer 62–63 Index 64

This catalog supersedes all previous issues. All tools in this catalog are subject to availability. Photographs are representative of the item descriptions. Every effort is made to ensure that the products listed are available and the photographs accurately represent the products. Danaher reserves the right to discontinue product, change product num- bers, features, specifications and pricing at any time without notice. CFT Vo-tech '08-09 4/23/08 9:58 PM Page 1

Tool Set Classification Guide

Tool Sets Easy-reference classification system

Craftsman® innovation PROFESSIONAL BASIC The broadest solution featuring the largest Basic tool sets consist of our standard and design lead assortment of Craftsman Professional Craftsman product. They’re perfect for the way with tools products you’ll need throughout your career. budget oriented students and professionals. An enormous value for professionals or Look for our standard acrylic screwdrivers, that are built tough students in advanced-studies. Look for standard grip pliers, and satin finish Professional screwdrivers, locking pliers, wrenches. to last forever. and retaining ring pliers. Some sets also feature full polish Professional wrenches SPECIALTY / ACCESSORY and ratchets. Specialty and accessory sets complement professional, advanced or basic sets you ADVANCED already have and use. Add-on according to These sets also feature Craftsman your needs in class or on the job. Professional products, but with a lower piece count. Advanced sets enable students or up-and-coming professionals to start with a smaller assortment of professional grade tools at a lower initial investment. These sets are an excellent foundation for 1 your career and will grow with you. CFT Vo-tech '08-09 4/23/08 9:58 PM Page 2

Professional Diesel Tool Set

9-43573 1⁄4" 9-43578 7⁄16" 11 Six-Point Metric Deep Sockets ▲ APPLICATION: 9 1 9-200562 9-43574 ⁄32" 9-43589 ⁄2" 9-44401 4mm 9-44407 10mm For work force and professional 9-43575 5⁄16" 9-43587 9⁄16" 9-44402 5mm 9-44408 11mm Professional Diesel training 10 Twelve-Point Standard Sockets 9-44403 6mm 9-44409 12mm Tool Set - 406 Pc. 9-43608 3⁄16" 9-43604 11⁄32" 9-44404 7mm 9-44411 13mm 1/4" Drive Sockets 9-43609 7⁄32" 9-43605 3⁄8" 9-44405 8mm 9-44412 14mm 11 Six-Point Standard Sockets 9-43601 1⁄4" 9-43606 7⁄16" 9-44406 9mm 9-43481 5⁄32" 9-43496 11⁄32" 9-43602 9⁄32" 9-43607 1⁄2" 5 Hex Bit Sockets 9-43491 3⁄16" 9-43497 3⁄8" 9-43603 5⁄16" 9-43610 9⁄16" 9-42701 3⁄16" 9-42704 5⁄16" 9-43492 7⁄32" 9-43498 7⁄16" 12 Six-Point Metric Sockets 9-42702 7⁄32" 9-42705 3⁄8" 9-43493 1⁄4" 9-43499 1⁄2" 9-43505 4mm 9-43507 9mm 9-42703 1⁄4" 9-43494 9⁄32" 9-43480 9⁄16" 9-43501 5mm 9-43508 10mm 2 Phillips Bit Sockets 9-43495 5⁄16" 9-43511 5.5mm 9-43509 11mm 9-42681 #1 9-42682 #2 10 Six-Point Standard Deep Sockets 9-43502 6mm 9-43513 12mm 2 Slotted Bit Sockets 9-43571 3⁄16" 9-43576 11⁄32" 9-43503 7mm 9-43514 13mm 9-42691 7⁄32" 9-42692 1⁄4" 9-43572 7⁄32" 9-43577 3⁄8" 9-43504 8mm 9-43512 14mm 2 ■ PROFESSIONAL ■ ADVANCED ■ BASIC ■ SPECIALTY/ACCESSORY CFT Vo-tech '08-09 4/23/08 9:58 PM Page 3

Professional Diesel Tool Set

3 Torx® Bit Sockets 22 Twelve-Point Metric Sockets 1 Pipe Wrench Other Tools 9-42661 T-15 9-42663 T-25 9-44231 9mm 9-44268 20mm 9-51651 10", 11⁄2" Cap. 73-229 Chain Wrench 9-42662 T-20 9-44232 10mm 9-44249 21mm 2 Micrometer Torque Wrenches 9-16391 11 Pc. Air Compressor 1/4" Drive Tools 9-44229 11mm 9-44239 22mm KDS3263 50-250 in/lb (3⁄8" Dr.) Accessory Kit 9-44807 QR TD Ratchet 9-44233 12mm 9-44240 23mm KDS2952 30-250 ft/lb (1⁄2" Dr.) 9-36143 Flush-Cut Saw 9-43539 3" Extension Bar 9-44234 13mm 9-44242 24mm Hex Keys 9-3669 Shoehandle Wire Brush 9-43531 6" Extension Bar 9-44235 14mm 9-44269 25mm 13 Standard Ball End Hex Keys 9-41322 Flexible Pick-Up Tool 9-4336 Flex Extension 9-44236 15mm 9-44272 26mm 9-46754 Includes .050, 1⁄16" with Spring Jaws 9-4354 41⁄2" Slide Bar Handle 9-44266 16mm 9-44243 27mm 5⁄64", 3⁄32", 7⁄64", 1⁄8", 9-4319 Cotter Key Puller 9 5 3 7 9-4280 Universal Joint 9-44237 17mm 9-44276 28mm ⁄64", ⁄32", ⁄16", ⁄32", 9-4717 5 Pc. Specialty Tool Kit 1 5 3 9-43523 Flex T-Handle 9-44267 18mm 9-44244 30mm ⁄4", ⁄16", ⁄8" long arm (1" x 2" inspection mirror; 3/8" Drive Sockets 9-44238 19mm 9-44245 32mm sizes. Telescoping magnetic pick-up 9 Six-Point Standard Deep Sockets 7 Twelve-Point Metric Deep Sockets 13 Metric Ball End Hex Keys tool; Slotted screw starter; 9-43333 3⁄8" 9-43336 11⁄16" 9-44444 14mm 9-44447 21mm 9-46755 Includes 1.5, 2, 2.5, 3, Phillips/Torx screw starter; 9-43331 7⁄16" 9-43337 3⁄4" 9-44442 15mm 9-44448 22mm 4, 4.5, 5, 5.5, 6, 7, 8, Double pointed scribe) 9-43332 1⁄2" 9-43338 13⁄16" 9-44445 17mm 9-44449 27mm 9, 10mm long arm 9-45494 Brake Spring Pliers 9-43334 9⁄16" 9-43339 7⁄8" 9-44446 19mm sizes. 9-45496 Brake Adjusting Tool 9-43335 5⁄8" 2 Spark Plug Sockets Screwdrivers 9-47767 Universal Brake 5 Eight-Point Standard Sockets 9-43327 5⁄8" 9-44241 13⁄16" 1 Phillips Screwdriver Retaining Spring Tool 1 9-44341 1⁄4" 9-44344 7⁄16" 2 Six-Point Standard Deep Impact 9-4118 #2 x 1 ⁄2" 9-47645 Seal Puller 9-44342 5⁄16" 9-44345 1⁄2" Sockets 3 Professional Phillips Screwdrivers 9-47672 Battery Terminal Puller 9-47184 #1 x 4" 9-44343 3⁄8" 9-15983 15⁄16" 9-90344 Tire Valve Stem 1 8 Twelve-Point Standard Sockets 9-15984 1" 9-47185 #2 x 2 ⁄4" Replacement Tool 9-44331 3⁄8" 9-44335 5⁄8" 1/2" Drive Tools 9-47186 #2 x 4" 9-AO13640 Safety Glasses 9-44332 7⁄16" 9-44336 11⁄16" 9-44809 QR TD Ratchet 1 Slotted Screwdriver 9-HLQM24 Hearing Protector 9-4151 1⁄4" x 11⁄2" 9-44333 1⁄2" 9-44337 3⁄4" 9-44202 Flex T-Handle KDS161 Deluxe Feeler Gauge 9-44334 9⁄16" 9-44338 13⁄16" 9-44133 3" Extension Bar 5 Professional Slotted Screwdrivers 1 1 KDS206 Battery Brush 10 Six-Point Metric Sockets 9-44131 6" Extension Bar 9-47193 ⁄4" x 2 ⁄4" KDS204 Battery Terminal 9-47194 1⁄4" x 4" 9-43542 10mm 9-43547 15mm 9-44132 10" Extension Bar Spreader & Cleaner 9-47195 1⁄4" x 6" 9-43543 11mm 9-43570 16mm 9-4425 Universal Joint KDS2173 3-Way Battery Tool 9-47197 5⁄16" x 6" 9-43544 12mm 9-43548 17mm Wrenches KDS2274 Metric Feeler Gauge Set 9-47199 3⁄8" x 8" 9-43545 13mm 9-43579 18mm 8 Standard Reversible Ratcheting Pliers KDS3149 Nylon Strap Oil Filter 9-43546 14mm 9-43549 19mm Wrenches Wrench 1 Pliers 9 Six-Point Metric Deep Sockets 9-42412 5⁄16" 9-42416 9⁄16" 9-MF976 Air Service Gauge 9-45384 161⁄2" Tongue & 9-44426 10mm 9-44433 16mm 9-42413 3⁄8" 9-42417 5⁄8" Groove 9-GT321 Thermometer 9-44428 12mm 9-44434 17mm 9-42414 7⁄16" 9-42418 11⁄16" 4 Professional Pliers KDS720 Screw Extractor Kit 9-44429 13mm 9-44435 18mm 9-42415 1⁄2" 9-42419 3⁄4" 9-37372 1" x 8M/26' Locking 9-45760 63⁄4" Pro Slip Joint 9-44431 14mm 9-44436 19mm 8 Metric Reversible Ratcheting Tape Measure 9-45766 101⁄2" Pro Tongue & 9-44432 15mm Wrenches Groove KDS2522 6" Stainless Steel Rule 6 Standard Hex Bit Sockets 9-42420 8mm 9-42425 14mm 9-45763 8" Pro Long Nose KDS203 Battery Nut Pliers 9-46669 5⁄32" 9-46663 1⁄4" 9-42421 10mm 9-42426 15mm Tool Storage 3 5 9-45767 8" Pro Wide Jaw 9-46661 ⁄16" 9-46664 ⁄16" 9-42423 12mm 9-42428 17mm Diagonal 17 Steel Socket Carry Racks 7 3 1 9-46662 ⁄32" 9-46665 ⁄8" 9-42424 13mm 9-42429 18mm 4 Professional Locking Pliers 9-41333 5 ea. ⁄4" Drive 3 6 Metric Hex Bit Sockets 18 Standard Full Polish 9-45715 10" Straight Jaw 9-41334 6 ea. ⁄8" Drive 9-42674 4mm 9-42677 7mm Combination Wrenches 9-41335 6 ea. 1⁄2" Drive 1 13 9-45717 5" Curved Jaw 9-42675 5mm 9-42678 8mm 9-45973 ⁄4" 9-45982 ⁄16" 9-45710 7" Curved Jaw 9-42676 6mm 9-42679 10mm 9-45974 5⁄16" 9-45983 7⁄8" Not All Tools Craftsman® Branded 3 15 9-45716 6" Long Nose 3 Phillips Bit Sockets 9-45975 ⁄8" 9-45984 ⁄16" 1 Professional Retaining Ring Pliers Kit 7 9-44371 #2 9-44373 #4 9-45976 ⁄16" 9-45985 1" 9-50465 6 piece includes .038, 1 1 9-44372 #3 9-45977 ⁄2" 9-45950 1 ⁄16" .047, & .070 diameter 9 1 3 Slotted Bit Sockets 9-45978 ⁄16" 9-45951 1 ⁄8" tips in 18 and 70 5 1 9-42651 .030 9-42653 .055 9-45979 ⁄8" 9-45952 1 ⁄4" degree angles 9-42652 .039 9-45980 11⁄16" 9-45953 15⁄16" 4 Hammers 3 1 4 Torx® Bit Sockets 9-45981 ⁄4" 9-45954 1 ⁄2" 9-38394 2 lb. Dead Blow 9-42664 T-30 9-42666 T-45 18 Metric Full Polish Combination 9-38464 12 oz. Hickory Handle 9-42665 T-40 9-42667 T-50 Wrenches Ball Pein 2 Six-Point Spark Plug Sockets 9-45986 7mm 9-45995 16mm 9-38466 24 oz. Hickory Handle 9-43324 5⁄8" 9-43325 13⁄16" 9-45987 8mm 9-45996 17mm Ball Pein 2 Six-Point Flex Spark Plug Sockets 9-45988 9mm 9-45997 18mm EHT81112 32 oz. Brass 9-43322 5⁄8" 9-43323 13⁄16" 9-45989 10mm 9-45998 19mm Punches & Chisels 3/8" Drive Tools 9-45990 11mm 9-45956 22mm 1 Center Punch 9-44808 QR TD Ratchet Long 9-45991 12mm 9-45957 23mm 9-42861 3⁄8" 9-44815 QR TD Flex Ratchet 9-45992 13mm 9-45958 24mm 1 Prick Punch 9-44363 10" Flex T-Handle 9-45993 14mm 9-45959 25mm 9-42841 3⁄8" 9-4428 7" Slide Bar 9-45994 15mm 9-45960 30mm 4 Pin Punches 9-44271 16" Speeder 5 Full Polish Offset Wrenches 9-42881 1⁄16" 9-42883 1⁄8" 3 7 9-4435 Universal Joint 9-44316 ⁄8" x ⁄16" 9-42885 3⁄16" 9-42882 3⁄32" 9-44264 3" Extension Bar 9-44317 1⁄2" x 9⁄16 2 Line-Up Tools 9-44261 6" Extension Bar 9-44318 5⁄8" x 11⁄16" 9-42901 5⁄32" 9-42902 3⁄16" 9-44262 10" Extension Bar 9-44319 3⁄4" x 7⁄8" 4 Cold Chisels 1/2" Drive Sockets 9-44320 13⁄16" x 15⁄16" 9-42971 1⁄4" 9-42973 1⁄2" 14 Six-Point Standard Sockets 3 Professional Adjustable Wrenches 9-42974 5⁄8" 9-42975 3⁄4" 9-44053 3⁄8" 9-44063 13⁄16" 9-44166 15⁄16" 6" Length 1 Brass Drift Punch 9-44054 7⁄16" 9-44064 7⁄8" 9-44167 11⁄8" 8" Length EHT33204 1⁄2" 9-44055 1⁄2" 9-44065 15⁄16" 9-44168 11⁄4" 10" Length 1 Alignment Tool 9-44056 9⁄16" 9-44066 1" 4 Standard Flare Nut Wrenches 9-42892 16" Rolling Wedge Bar 9-44057 5⁄8" 9-44067 11⁄16" 9-44174 3⁄8" x 7⁄16" 3 Pry Bars 9-44058 11⁄16" 9-44068 11⁄8" 9-44171 1⁄2" x 9⁄16" 70-535 11⁄16" x 18" 9-44059 3⁄4" 9-44069 11⁄4" 9-44173 5⁄8" x 11⁄16" 70-537 11⁄16" x 24" 11 Six-Point Standard Deep Sockets 9-44172 3⁄4" x 7⁄8" 9-4283 1⁄2" x 16" RECOMMENDED 9-47582 1⁄2" 9-47588 7⁄8" 5 Metric Flare Nut Wrenches 5 Files TOOL STORAGE: 9-47583 9⁄16" 9-47589 15⁄16" 9-44175 9 x 11mm 9-31211 8" Shoe 9-2112 and 9-2113 9-47584 5⁄8" 9-47591 1" 9-44176 10 x 12mm 9-31303 7" Taper Black Boxes, 40" Ball-Bearing 9-47585 11⁄16" 9-47592 11⁄16" 9-44177 13 x 14mm 9-31310 8" Mill 7-Drawer Chest and 9-47586 3⁄4" 9-47593 11⁄8" 9-44178 15 x 17mm 9-31312 8" Round 12-Drawer Cart 9-47587 13⁄16" 9-44179 19 x 21mm 9-31311 8" Half Round

3 CFT Vo-tech '08-09 4/23/08 9:58 PM Page 4

Professional Auto Tool Set

1/4" Drive Sockets 12 Six-Point Metric Sockets 2 Slotted Bit Sockets ▲ 9-200560 11 Six-Point Standard Sockets 9-43505 4mm 9-43507 9mm 9-42691 7⁄32" 9-42692 1⁄4" 9-43481 5⁄32" 9-43496 11⁄32" 9-43501 5mm 9-43508 10mm 3 Torx® Bit Sockets Professional Auto 9-43491 3⁄16" 9-43497 3⁄8" 9-43511 5.5mm 9-43509 11mm 9-42661 T-15 9-42663 T-25 Tool Set - 428 Pc. 9-43492 7⁄32" 9-43498 7⁄16" 9-43502 6mm 9-43513 12mm 9-42662 T-20 9-43493 1⁄4" 9-43499 1⁄2" 9-43503 7mm 9-43514 13mm 1/4" Drive Tools 9-43494 9⁄32" 9-43480 9⁄16" 9-43504 8mm 9-43512 14mm 9-44807 QR TD Ratchet 9-43495 5⁄16" 11 Six-Point Metric Deep Sockets 9-43539 3" Extension Bar 10 Six-Point Standard Deep Sockets 9-44401 4mm 9-44407 10mm 9-43531 6" Extension Bar 9-43571 3⁄16" 9-43576 11⁄32" 9-44402 5mm 9-44408 11mm 9-4336 Flex Extension 9-43572 7⁄32" 9-43577 3⁄8" 9-44403 6mm 9-44409 12mm 9-4354 41⁄2" Slide Bar Handle 9-43573 1⁄4" 9-43578 7⁄16" 9-44404 7mm 9-44411 13mm 9-4280 Universal Joint 9-43574 9⁄32" 9-43589 1⁄2" 9-44405 8mm 9-44412 14mm 9-43523 Flex T-Handle 9-43575 5⁄16" 9-43587 9⁄16" 9-44406 9mm 9-4257 Socket Adapter, 10 Twelve-Point Standard Sockets 5 Hex Bit Sockets 1⁄4"F x 3⁄8"M 9-43608 3⁄16" 9-43604 11⁄32" 9-42701 3⁄16" 9-42704 5⁄16" 3/8" Drive Sockets APPLICATION: 9-43609 7⁄32" 9-43605 3⁄8" 9-42702 7⁄32" 9-42705 3⁄8" 9 Six-Point Standard Deep Sockets For work force and 9-43601 1⁄4" 9-43606 7⁄16" 9-42703 1⁄4" 9-43333 3⁄8" 9-43336 11⁄16" professional training 9-43602 9⁄32" 9-43607 1⁄2" 2 Phillips Screwdriver Bit Sockets 9-43331 7⁄16" 9-43337 3⁄4" 9-43603 5⁄16" 9-43610 9⁄16" 9-42681 #1 9-42682 #2 9-43332 1⁄2" 9-43338 13⁄16"

4 ■ PROFESSIONAL ■ ADVANCED ■ BASIC ■ SPECIALTY/ACCESSORY CFT Vo-tech '08-09 4/23/08 9:58 PM Page 5

Professional Auto Tool Set

9-43334 9⁄16" 9-43339 7⁄8" 9-44235 14mm 9-44269 25mm 9-42342 5mm 9-42347 9mm 9-4717 5 Pc. Specialty Tool Kit 9-43335 5⁄8" 9-44236 15mm 9-44272 26mm 9-42343 5.5mm 9-42348 10mm (1" x 2" inspection mirror; 5 Eight-Point Standard Sockets 9-44266 16mm 9-44243 27mm 9-42344 6mm 9-42349 11mm Telescoping magnetic 9-44341 1⁄4" 9-44344 7⁄16" 9-44237 17mm 9-44276 28mm 10 Standard Crowfoot Wrenches pick-up tool; Slotted screw 9-44342 5⁄16" 9-44345 1⁄2" 9-44267 18mm 9-44244 30mm 9-43611 3⁄8" 9-43625 11⁄16" starter; Phillips/Torx screw 9-44343 3⁄8" 9-44238 19mm 9-43621 7⁄16" 9-43626 3⁄4" starter; Double pointed 8 Twelve-Point Standard Sockets 8 Twelve-Point Metric Deep Sockets 9-43622 1⁄2" 9-43627 13⁄16" scribe) 9-44331 3⁄8" 9-44335 5⁄8" 9-44441 13mm 9-44446 19mm 9-43623 9⁄16" 9-43628 7⁄8" 9-45494 Brake Spring Pliers 9-44332 7⁄16" 9-44336 11⁄16" 9-44444 14mm 9-44447 21mm 9-43624 5⁄8" 9-43629 1" 9-45496 Brake Adjusting Tool 9-44333 1⁄2" 9-44337 3⁄4" 9-44442 15mm 9-44448 22mm 10 Metric Crowfoot Wrenches 9-47767 Universal Brake Spring 9-44334 9⁄16" 9-44338 13⁄16" 9-44445 17mm 9-44449 27mm 9-43631 10mm 9-43636 15mm Retaining Tool 10 Six-Point Metric Sockets 2 Spark Plug Sockets 9-43632 11mm 9-43637 16mm 28-20522 Std Swivel Grip Filter 9-43542 10mm 9-43547 15mm 9-43327 5⁄8" 9-44241 13⁄16" 9-43633 12mm 9-43638 17mm Wrench 9-43543 11mm 9-43570 16mm 1/2" Drive Tools 9-43634 13mm 9-43639 18mm 9-47641 6 Pc. Hand Impact Driver 9-43544 12mm 9-43548 17mm 9-44809 QR TD Ratchet 9-43635 14mm 9-43641 19mm Set (1⁄2" sq. drive tool 9-43545 13mm 9-43579 18mm 9-44202 Flex T-Handle Screwdrivers Adapter; Phillips #2, #3, #4 9-43546 14mm 9-43549 19mm 9-44133 3" Extension Bar 1 Phillips Screwdriver bits; 3⁄8" slotted bit) 9 Six-Point Metric Deep Sockets 9-44131 6" Extension Bar 9-4118 #2 x 11⁄2" 9-47645 Seal Puller 9-44426 10mm 9-44433 16mm 9-44132 10" Extension Bar 3 Professional Phillips Screwdrivers 9-65216 Pre-Cut Roll-Away 9-44428 12mm 9-44434 17mm 9-4425 Universal Joint 9-47184 #1 x 4" Drawer Liner Set 9-44429 13mm 9-44435 18mm 9-4259 Socket Adapter 9-47185 #2 x 21⁄4" 9-65660 Extra-Thick Roll-Away 1 9-44431 14mm 9-44436 19mm ⁄2"F x 3⁄8"M 9-47186 #2 x 4" Top Mat 9-44432 15mm Wrenches 1 Slotted Screwdriver 9-94815 11⁄4" Wide Extra Stiff 7 Six-Point Metric Flex Sockets 8 Standard Reversible Ratcheting 9-4151 1⁄4" x 11⁄2" Putty Knife 9-43201 10mm 9-43206 15mm Wrenches 5 Professional Slotted Screwdrivers 9-AO13640 Safety Glasses 9-43202 11mm 9-43208 17mm 9-42412 5⁄16" 9-42414 7⁄16" 9-47193 1⁄4" x 21⁄4" 9-HLQM24 Hearing Protector 9-43203 12mm 9-43211 19mm 9-42413 3⁄8" 9-42415 1⁄2" 9-47194 1⁄4" x 4" KDS126 High-Low Voltage 9-43204 13mm 9-42416 9⁄16" 9-42418 11⁄16" 9-47195 1⁄4" x 6" Tester 6 Hex Bit Sockets 9-42417 5⁄8" 9-42419 3⁄4" 9-47197 5⁄16" x 6" KDS161 Deluxe Feeler Gauge 9-46669 5⁄32" 9-46663 1⁄4" 8 Metric Reversible Wrenches 9-47199 3⁄8" x 8" KDS164 Spark Plug Gap and 9-46661 3⁄16" 9-46664 5⁄16" 9-42420 8mm 9-42423 12mm 1 Offset Screwdriver Feeler Gauge Set 9-46662 7⁄32" 9-46665 3⁄8" 9-42421 10mm 9-42424 13mm 9-41315 Slotted 1/4" and KDS485 Gasket Scraper 3 Phillips Bit Sockets 9-42425 14mm 9-42428 17mm Phillips #2 KDS203 Battery Nut Pliers 9-44371 #2 9-44373 #4 9-42426 15mm 9-42429 18mm Pliers KDS2173 3-Way Battery Tool 9-44372 #3 18 Standard Full Polish 1 Pliers 9-47672 Battery Terminal Puller 1 3 Slotted Bit Sockets Combination Wrenches 9-45174 4 ⁄2" Bent Nose Tool Storage 9-42651 .030 9-42653 .055 9-45973 1⁄4" 9-45982 13⁄16" 4 Professional Pliers 17 Steel Socket Carry Racks 9-42652 .039 9-45974 5⁄16" 9-45983 7⁄8" 9-45760 63⁄4" Pro Slip Joint 9-41333 5 ea. 1⁄4" Drive 4 Torx® Bit Sockets 9-45975 3⁄8" 9-45984 15⁄16" 9-45766 101⁄2" Pro Tongue & 9-41334 6 ea. 3⁄8" Drive 9-42664 T-30 9-42666 T-45 9-45976 7⁄16" 9-45985 1" Groove 9-41335 6 ea. 1⁄2" Drive 9-42665 T-40 9-42667 T-50 9-45977 1⁄2" 9-45950 11⁄16" 9-45763 8" Pro Long Nose 2 Six-Point Spark Plug Sockets 9-45978 9⁄16" 9-45951 11⁄8" 9-45767 8" Pro Wide Jaw Not All Tools Craftsman® Branded 9-43324 5⁄8" 9-43325 13⁄16" 9-45979 5⁄8" 9-45952 11⁄4" Diagonal 2 Six-Point Flex Spark Plug Sockets 9-45980 11⁄16" 9-45953 15⁄16" 3 Professional Locking Pliers 9-43322 5⁄8" 9-43323 13⁄16" 9-45981 3⁄4" 9-45954 11⁄2" 9-45715 10" Straight Jaw 3/8" Drive Tools 18 Metric Full Polish 9-45710 7" Curved Jaw 9-44808 QR TD Ratchet Long Combination Wrenches 9-45716 6" Long Nose 9-44815 QR TD Flex Ratchet 9-45986 7mm 9-45995 16mm 1 Professional Retaining Ring Pliers Kit 9-44363 10" Flex T-Handle 9-45987 8mm 9-45996 17mm 9-50465 6 piece includes .038, 9-4428 7" Slide Bar 9-45988 9mm 9-45997 18mm .047, & .070 diameter 9-44271 16" Speeder 9-45989 10mm 9-45998 19mm tips in 18 and 70 9-4435 Universal Joint 9-45990 11mm 9-45956 22mm degree angles 9-44264 3" Extension Bar 9-45991 12mm 9-45957 23mm 2 Hammers 9-44261 6" Extension Bar 9-45992 13mm 9-45958 24mm EHT81111 16 oz. Brass 9-44262 10" Extension Bar 9-45993 14mm 9-45959 25mm 69-532 21 oz. Dead Blow 9-4256 Socket Adapter, 9-45994 15mm 9-45960 30mm Punches & Chisels 3⁄8"F x 1⁄4"M 3 Professional Adjustable Wrenches 1 Center Punch 1/2" Drive Sockets 9-44166 15⁄16" 6" Length 9-42861 3⁄8" 14 Six-Point Standard Sockets 9-44167 11⁄8" 8" Length 1 Prick Punch 9-44053 3⁄8" 9-44063 13⁄16" 9-44168 11⁄4" 10" Length 9-42841 3⁄8" 9-44054 7⁄16" 9-44064 7⁄8" 4 Standard Flare Nut Wrenches 4 Pin Punches 9-44055 1⁄2" 9-44065 15⁄16" 9-44174 3⁄8" x 7⁄16" 9-42881 1⁄16" 9-42883 1⁄8" 9-44056 9⁄16" 9-44066 1" 9-44173 5⁄8" x 11⁄16" 9-42882 3⁄32" 9-42885 3⁄16" 9-44057 5⁄8" 9-44067 11⁄16" 9-44171 1⁄2" x 9⁄16" 2 Line-Up Tools 9-44058 11⁄16" 9-44068 11⁄8" 9-44172 3⁄4" x 7⁄8" 9-42901 5⁄32" 9-42902 3⁄16" 9-44059 3⁄4" 9-44069 11⁄4" 5 Metric Flare Nut Wrenches 4 Cold Chisels 11 Six-Point Standard Deep Sockets 9-44175 9 x 11mm 9-42971 1⁄4" 9-42974 5⁄8" 9-47582 1⁄2" 9-47588 7⁄8" 9-44176 10 x 12mm 9-42973 1⁄2" 9-42975 3⁄4" 9-47583 9⁄16" 9-47589 15⁄16" 9-44177 13 x 14mm 1 Cape Chisel 9-47584 5⁄8" 9-47591 1" 9-44178 15 x 17mm EHT33151 3⁄8" Cut x 1⁄2" Hex x 6" 9-47585 11⁄16" 9-47592 11⁄16" 9-44179 19 x 21mm Long 9-47586 3⁄4" 9-47593 11⁄8" 3 Torque Wrenches 1 Alignment Tool 9-47587 13⁄16" 9-44593 Microtork® 25-250 9-42892 16" Rolling Wedge Bar 3 14 Six-Point Metric Sockets in/lb ⁄8" Dr. 3 Pry Bars 11 9-44251 9mm 9-44273 16mm KDS2952 Micrometer 30-250 70-535 ⁄16" x 18" 1 11 9-44252 10mm 9-44258 17mm ft/lb ⁄2" Dr. 70-537 ⁄16" x 24" 9-44253 11mm 9-44228 18mm KDS2954 Micrometer 5-75 ft/lb 9-4283 1⁄2" x 16" 3 9-44254 12mm 9-44259 19mm ⁄8" Dr., Flex Head 5 Files RECOMMENDED 9-44255 13mm 9-44274 20mm 10 Standard Comb. Ignition Wrenches 9-31211 8" Shoe 9-44256 14mm 9-44278 21mm 9-42320 5⁄32" 9-42323 7⁄32" 9-31303 7" Taper TOOL STORAGE: 9-2112 and 9-2113 9-44257 15mm 9-44265 22mm 9-42321 3⁄16" 9-42324 15⁄64" 9-31310 8" Mill 21 Twelve-Point Metric Sockets 9-42322 13⁄64" 9-42325 1⁄4" 9-31312 8" Round Black Boxes, 40" Ball-Bearing 9-44231 9mm 9-44268 20mm 9-42326 9⁄32" 9-42328 3⁄8" 9-31311 8" Half Round 7-Drawer Chest and 12-Drawer Cart 9-44232 10mm 9-44249 21mm 9-42327 5⁄16" 9-42329 7⁄16" Other Tools 9-44229 11mm 9-44239 22mm 10 Metric Comb. Ignition Wrenches KDS2522 6" Stainless Steel Rule 9-44233 12mm 9-44240 23mm 9-42340 4mm 9-42345 7mm 9-12612 Fender Cover 9-44234 13mm 9-44242 24mm 9-42341 4.5mm 9-42346 8mm 9-3669 Shoehandle Wire Brush

5 CFT Vo-tech '08-09 4/23/08 9:58 PM Page 6

Advanced Auto/Diesel Tool Set

1/4" Drive Sockets 9-43503 7mm 9-43514 13mm 3/8" Drive Sockets ▲ 9-200499 11 Six-Point Standard Sockets 9-43504 8mm 9-43512 14mm 9 Six-Point Standard Sockets 9-43481 5⁄32" 9-43496 11⁄32" 11 Six-Point Metric Deep Sockets 9-43001 3⁄8" 9-43006 11⁄16" Advanced Auto/Diesel 9-43491 3⁄16" 9-43497 3⁄8" 9-44401 4mm 9-44407 10mm 9-43002 7⁄16" 9-43007 3⁄4" Tool Set - 347 Pc. 9-43492 7⁄32" 9-43498 7⁄16" 9-44402 5mm 9-44408 11mm 9-43003 1⁄2" 9-43008 13⁄16" 9-43493 1⁄4" 9-43499 1⁄2" 9-44403 6mm 9-44409 12mm 9-43004 9⁄16" 9-43013 7⁄8" 9-43494 9⁄32" 9-43480 9⁄16" 9-44404 7mm 9-44411 13mm 9-43005 5⁄8" 9-43495 5⁄16" 9-44405 8mm 9-44412 14mm 9 Six-Point Standard Deep Sockets 10 Six-Point Standard Deep Sockets 9-44406 9mm 9-43333 3⁄8" 9-43336 11⁄16" 9-43571 3⁄16" 9-43576 11⁄32" 1/4" Drive Tools 9-43331 7⁄16" 9-43337 3⁄4" 9-43572 7⁄32" 9-43577 3⁄8" 9-44812 Pro FP QR TD Ratchet 9-43332 1⁄2" 9-43338 13⁄16" 9-43573 1⁄4" 9-43578 7⁄16" 9-43538 11⁄2" Extension Bar 9-43334 9⁄16" 9-43339 7⁄8" 9-43574 9⁄32" 9-43589 1⁄2" 9-43539 3" Extension Bar 9-43335 5⁄8" 9-43575 5⁄16" 9-43587 9⁄16" 9-43531 6" Extension Bar 13 Six-Point Metric Sockets 12 Six-Point Metric Sockets 9-4257 Socket Adapter, 9-43541 9mm 9-43570 16mm 1 3 9-43505 4mm 9-43507 9mm ⁄4"F x ⁄8"M 9-43542 10mm 9-43548 17mm APPLICATION: 9-43501 5mm 9-43508 10mm 9-4280 Universal Joint 9-43543 11mm 9-43579 18mm Student/Apprentice auto and 9-43511 5.5mm 9-43509 11mm 9-43393 Plastic Handle Driver, 9-43544 12mm 9-43549 19mm diesel technology training 9-43502 6mm 9-43513 12mm 6" Long 9-43545 13mm 9-43580 20mm

6 ■ PROFESSIONAL ■ ADVANCED ■ BASIC ■ SPECIALTY/ACCESSORY CFT Vo-tech '08-09 4/23/08 9:58 PM Page 7

Advanced Auto/Diesel Tool Set

9-43546 14mm 9-43584 21mm 9-44202 18" Flex T-Handle 3 Professional Locking Pliers 9-43547 15mm 9-4425 Universal Joint 9-45764 8" Long Nose 11 Six-Point Metric Deep Sockets Wrenches 9-45715 10" Straight Jaw 9-44425 9mm 9-44432 15mm 13 Standard Full Polish Combination 9-45710 7" Curved Jaw 9-44426 10mm 9-44433 16mm Wrenches 2 Qtr-Turn® Retaining Ring Pliers 9-44427 11mm 9-44434 17mm 9-45973 1⁄4" 9-45980 11⁄16" 9-47383 0.038 9-44428 12mm 9-44435 18mm 9-45974 5⁄16" 9-45981 3⁄4" 9-47384 0.070 9-44429 13mm 9-44436 19mm 9-45975 3⁄8" 9-45982 13⁄16" 5 Hammers 9-44431 14mm 9-45976 7⁄16" 9-45983 7⁄8" 9-38262 40 oz. Blacksmith 2 Six-Point Spark Plug Sockets 9-45977 1⁄2" 9-45984 15⁄16" 9-38292 12 oz., 121⁄2" Plastic Tip 9-43324 5⁄8" 9-45978 9⁄16" 9-45985 1" 9-38464 12 oz. Hickory Handle 9-43325 13⁄16" 9-45979 5⁄8" Ball Pein 6 Standard Hex Bit Sockets 13 Metric Full Polish Combination 9-38466 24 oz. Hickory Handle 9-46669 5⁄32" 9-46663 1⁄4" Wrenches Ball Pein 9-46661 3⁄16" 9-46664 5⁄16" 9-45986 7mm 9-45993 14mm EHT81112 32 oz. Brass RECOMMENDED 9-46662 7⁄32" 9-46665 3⁄8" 9-45987 8mm 9-45994 15mm Punches and Chisels TOOL STORAGE: 6 Metric Hex Bit Sockets 9-45988 9mm 9-45995 16mm 1 Center Punch 9-2118 9-42674 4mm 9-42677 7mm 9-45989 10mm 9-45996 17mm 9-42861 3⁄8" Black “Long Distance” Cart, 9-42675 5mm 9-42678 8mm 9-45990 11mm 9-45997 18mm 1 Prick Punch 41" 12-Drawer Cart 9-42676 6mm 9-42679 10mm 9-45991 12mm 9-45998 19mm 9-42841 3⁄8" 4 Phillips Bit Sockets 9-45992 13mm 4 Pin Punches 9-44369 #1 9-44372 #3 12 Standard Stubby Full Polish 9-42881 1⁄16" 9-42883 1⁄8" 9-44371 #2 9-44373 #4 Combination Wrenches 9-42882 3⁄32" 9-42885 3⁄16" 3 Slotted Bit Sockets 9-44089 5⁄16" 9-44108 11⁄16" 2 Line-Up Tools 9-42651 .030 x 7⁄32" 9-44103 3⁄8" 9-44109 3⁄4" 9-42901 5⁄32" 9-42902 3⁄16" 9-42652 .039 x 9⁄32" 9-44104 7⁄16" 9-44099 13⁄16" 4 Cold Chisels 9-42653 .055 x 3⁄8" 9-44105 1⁄2" 9-44100 7⁄8" 9-42971 1⁄4" 9-42973 1⁄2" 7 Torx® Bit Sockets 9-44106 9⁄16" 9-44102 15⁄16" 9-42974 5⁄8" 9-42975 3⁄4" 9-42661 T-15 9-42665 T-40 9-44107 5⁄8" 9-44110 1" 1 Brass Drift Punch 9-42662 T-20 9-42666 T-45 13 Metric Stubby Full Polish EHT33204 1⁄2" 9-42663 T-25 9-42667 T-50 Combination Wrenches 1 Alignment Tool 9-42664 T-30 9-44112 9mm 9-44118 17mm 9-42892 16" Rolling Wedge Bar 3/8" Drive Tools 9-44113 10mm 9-44119 18mm 2 Pry Bars 9-44813 Pro 75⁄8" FP QR TD 9-44114 12mm 9-44120 19mm 9-4283 1⁄2" x 16" Ratchet 9-44115 13mm 9-44122 20mm 70-537 11⁄16" x 24" 9-44833 Pro 11" FP QR TD 9-44116 14mm 9-44124 21mm 5 Files Ratchet 9-44117 15mm 9-44130 22mm 9-31211 8" Shoe 9-44834 Pro Stubby Flex TD 9-44140 16mm 9-31303 7" Taper Ratchet 3 Professional Adjustable Wrenches 9-31310 8" Mill 9-44264 3" Extension Bar 9-44166 15⁄16" 6" Length 9-31311 8" Half Round 9-44261 6" Extension Bar 9-44167 11⁄8" 8" Length 9-31312 8" Round 9-44262 10" Extension Bar 9-44168 11⁄4" 10" Length Other Tools 9-4256 Socket Adapter, 4 Standard Flare Nut Wrenches 9-4070 21⁄4" Round Inspection 3⁄8"F x 1⁄4"M 9-44174 3⁄8" x 7⁄16" Mirror 9-4258 Socket Adapter, 9-44171 1⁄2" x 9⁄16" 9-47672 Battery Terminal Puller 3⁄8"F x 1⁄2"M 9-44173 5⁄8" x 11⁄16" 9-36143 12" Convertible Heavy- 9-4435 Universal Joint 9-44172 3⁄4" x 7⁄8" Duty Hacksaw 1/2" Drive Sockets 5 Metric Flare Nut Wrenches 9-37392 1" x 8M/26' Locking 14 Six-Point Standard Sockets 9-44175 9 x 11mm Tape Measure 9-44053 3⁄8" 9-44063 13⁄16" 9-44176 10 x 12mm 9-3669 Shoehandle Wire 9-44054 7⁄16" 9-44064 7⁄8" 9-44177 13 x 14mm Brush 9-44055 1⁄2" 9-44065 15⁄16" 9-44178 15 x 17mm 9-41322 231⁄4" Flexible Pick-Up 9-44056 9⁄16" 9-44066 1" 9-44179 19 x 21mm Tool with Spring Jaws 9-44057 5⁄8" 9-44067 11⁄16" Hex Keys 9-82563 Electrical Repair Tool 9-44058 11⁄16" 9-44068 11⁄8" 13 Standard Ball End Hex Keys 9-40811 36 Blade Std/Metric 9-44059 3⁄4" 9-44069 11⁄4" 9-46754 Includes .050, 1⁄16" Master Thickness 11 Six-Point Standard Deep Sockets 5⁄64", 3⁄32", 7⁄64", 1⁄8", Gauge 9-47582 1⁄2" 9-47588 7⁄8" 9⁄64", 5⁄32", 3⁄16", 7⁄32", 9-90344 Tire Valve Replacement 9-47583 9⁄16" 9-47589 15⁄16" 1⁄4", 5⁄16", 3⁄8" long arm Tool 9-47584 5⁄8" 9-47591 1" sizes. 9-94815 11⁄4" Extra Stiff Putty 9-47585 11⁄16" 9-47592 11⁄16" 13 Metric Ball End Hex Keys Knife 9-47586 3⁄4" 9-47593 11⁄8" 9-46755 Includes 1.5, 2, 2.5, 3, 9-94853 Retractable Aluminum 9-47587 13⁄16" 4, 4.5, 5, 5.5, 6, 7, 8, 9, Utility Knife 14 Six-Point Metric Sockets 10mm long arm sizes. 9-AO15902 Safety Glasses 9-44251 9mm 9-44273 16mm Screwdrivers 9-HLQM24 Hearing Protector 9-44252 10mm 9-44258 17mm 1 Phillips Screwdriver 9-45494 Brake Spring Pliers 9-44253 11mm 9-44228 18mm 9-4118 #2 x 11⁄2" 9-45496 Brake Adjusting Tool 9-44254 12mm 9-44259 19mm 3 Professional Phillips Screwdrivers 9-47767 Universal Brake 9-44255 13mm 9-44274 20mm 9-47184 #1 x 4" Spring Retaining Tool 9-44256 14mm 9-44278 21mm 9-47186 #2 x 4" 34-93660 LED Flashlight 9-44257 15mm 9-44265 22mm 9-47187 #3 x 6" KDS126 High-Low Voltage 11 Twelve-Point Metric Deep Sockets 1 Slotted Screwdriver Tester 9-44441 13mm 9-44446 19mm 9-4151 1⁄4" x 11⁄2" KDS203 Battery Nut Pliers 9-44444 14mm 9-44462 20mm 4 Professional Slotted Screwdrivers KDS2173 3-Way Battery Tool 9-44442 15mm 9-44447 21mm 9-47189 1⁄8" x 3" KDS2522 6" Stainless Steel Rule 9-44443 16mm 9-44448 22mm 9-47191 3⁄16" x 6" KDS3121 5 Pc. Hook and Pick 9-44445 17mm 9-44463 24mm 9-47195 1⁄4" x 6" Set (includes a 5" 9-44459 18mm 9-47197 5⁄16" x 6" aluminum handle and four 1/2" Drive Tools Pliers heat-treated, high carbon 9-44814 Pro FP QR TD Ratchet 4 Professional Pliers steel picks: o-ring, 90 9-44133 3" Extension Bar 9-45716 6" Long Nose degree, straight and hook) 9-44131 6" Extension Bar 9-45760 63⁄4" Slip Joint KDS485 Gasket Scraper 9-44132 10" Extension Bar 9-45761 91⁄2" Tongue & Groove 9-4259 Socket Adapter, 9-45762 6" Diagonal Pliers Not All Tools Craftsman® Branded 1⁄2"F x 3⁄8"M

7 CFT Vo-tech '08-09 4/23/08 9:59 PM Page 8

Advanced Auto Body Tool Set

8 ■ PROFESSIONAL ■ ADVANCED ■ BASIC ■ SPECIALTY/ACCESSORY CFT Vo-tech '08-09 4/24/08 2:43 PM Page 9

Advanced Auto Body Tool Set

12 Twelve-Point Metric Sockets 20 Metric Short and Long Arm Set GM/VW

▲ 9-200550 9-44301 9mm 9-44306 15mm 9-46677 Includes: 1.5, 2, 2.5, KDS3786-72 Door Panel Remover 9-44302 10mm 9-44311 16mm 3, 4, 4.5, 5, 5.5, 6, 7, Foreign/Domestic Advanced Auto Body 9-44309 11mm 9-44307 17mm 8mm short-arm sizes: KDS378-71 Door Trim Pad Tool Tool Set - 249 Pc. 9-44303 12mm 9-44312 18mm 1.5, 2, 2.5, 3, 4, 4.5, 9-3669 Shoehandle Wire 9-44304 13mm 9-44308 19mm 5, 5.5, 6mm long-arm Brush 9-44305 14mm 9-44314 21mm sizes; pouch. 9-16387 Heavy Duty Blow Gun 11 Six-Point Metric Deep Sockets Screwdrivers 9-37392 1" x 8M Locking Tape 9-44425 9mm 9-44432 15mm 3 Professional Phillips Screwdrivers Measure 9-44426 10mm 9-44433 16mm 9-47184 #1 x 4" 9-4717 5 Pc. Specialty Tool Kit 9-44427 11mm 9-44434 17mm 9-47185 #2 x 21⁄4" (1" x 2" inspection mirror; 9-44428 12mm 9-44435 18mm 9-47186 #2 x 4" Telescoping magnetic pick- 9-44429 13mm 9-44436 19mm 5 Professional Slotted Screwdrivers up tool; Slotted screw 9-44431 14mm 9-47193 1⁄4" x 21⁄4" starter; Phillips/Torx screw APPLICATION: 1 For student or apprentice auto 6 Standard Hex Bit Sockets 9-47194 ⁄4" x 4" starter; Double pointed 9-46669 5⁄32" 9-46663 1⁄4" 9-47195 1⁄4" x 6" scribe) body repair training 9-46661 3⁄16" 9-46664 5⁄16" 9-47197 5⁄16" x 6" 9-46662 7⁄32" 9-46665 3⁄8" 9-47199 3⁄8" x 8" Not All Tools Craftsman® Branded. 1/4" Drive Sockets 6 Metric Hex Bit Sockets 5 Professional Pliers 11 Six-Point Standard Sockets 9-42674 4mm 9-42677 7mm 9-45711 7" Pro Straight Jaw 5 32 11 32 9-43481 ⁄ " 9-43496 ⁄ " 9-42675 5mm 9-42678 8mm Locking 3 16 3 8 9-43491 ⁄ " 9-43497 ⁄ " 9-42676 6mm 9-42679 10mm 9-45760 63⁄4" Pro Slip Joint 7 32 7 16 9-43492 ⁄ " 9-43498 ⁄ " 3 Phillips Bit Sockets 9-45766 101⁄2" Pro Tongue & 1 1 9-43493 ⁄4" 9-43499 ⁄2" 9-44371 #2 9-44373 #4 Groove 9 9 9-43494 ⁄32" 9-43480 ⁄16" 9-44372 #3 9-45763 8" Pro Long Nose 5 9-43495 ⁄16" 3 Slotted Bit Sockets 9-45767 8" Pro Wide Jaw 10 Six-Point Standard Deep Sockets 9-42651 .030 9-42653 .055 Diagonal 3 11 9-43571 ⁄16" 9-43576 ⁄32" 9-42652 .039 1 Snips 7 3 9-43572 ⁄32" 9-43577 ⁄8" 6 Torx® Bit Sockets 9-42713 10" Compound 1 7 9-43573 ⁄4" 9-43578 ⁄16" 11-878 T-27 9-42666 T-45 Leverage Aviation, 9 1 9-43574 ⁄32" 9-43589 ⁄2" 9-42664 T-30 9-42667 T-50 Regular Straight Cut 5 9 9-43575 ⁄16" 9-43587 ⁄16" 9-42665 T-40 11-888 T-55 3 Hammers 12 Six-Point Metric Sockets 3/8" Drive Tools 9-47288 Cross Chisel 9-43505 4mm 9-43507 9mm 9-44813 FP QR TD Ratchet 9-47290 Shrinking 9-43501 5mm 9-43508 10mm 9-44264 3" Extension Bar 9-47298 Utility Pick RECOMMENDED 9-43511 5.5mm 9-43509 11mm 9-44261 6" Extension Bar Punches and Chisels 9-43502 6mm 9-43513 12mm TOOL STORAGE: 9-44262 10" Extension Bar 3 Cold Chisels 9-2118 9-43503 7mm 9-43514 13mm 9-44363 10" Flex T-Handle 9-42971 Cold Chisel, 1⁄4" x 4" Black “Long Distance” Cart, 9-43504 8mm 9-43512 14mm 9-4256 Socket Adapter, 9-42972 Cold Chisel, 3⁄8" x 5" 41" 12-Drawer Cart 11 Six-Point Metric Deep Sockets 3⁄8"F x 1⁄4"M 9-42973 Cold Chisel, 1⁄2" x 53⁄4" 9-44401 4mm 9-44407 10mm 9-4435 Universal Joint 4 Pin Punches 9-44402 5mm 9-44408 11mm Wrenches 9-42881 1⁄16" Pin 9-44403 6mm 9-44409 12mm 13 Standard Full Polish 9-42882 3⁄32" Pin 9-44404 7mm 9-44411 13mm Combination Wrenches 9-42883 1⁄8" Pin 9-44405 8mm 9-44412 14mm 9-45973 1⁄4" 9-45980 11⁄16" 9-42884 5⁄32" Pin 9-44406 9mm 9-45974 5⁄16" 9-45981 3⁄4" 1 Line Up Tool 5 Torx® Bit Sockets 9-45975 3⁄8" 9-45982 13⁄16" 9-42901 5⁄32" Line-Up 10-868 T-8 9-42662 T-20 9-45976 7⁄16" 9-45983 7⁄8" 4 Dollies 10-870 T-10 9-42663 T-25 9-45977 1⁄2" 9-45984 15⁄16 9-47293 Toe 9-42661 T-15 9-45978 9⁄ " 9-45985 1" 9-47294 Heel 1/4" Drive Tools 16 9-45979 5⁄8" 9-47295 General Purpose 9-44812 FP QR TD Ratchet 13 Metric Full Polish Combination 9-47292 Light Dinging Spoon 9-43539 3" Extension Bar Wrenches Other Tools 9-43531 6" Extension Bar 9-45986 7mm 9-45993 14mm 9-41028 Scratch Awl 9-4257 Socket Adapter, 9-45987 8mm 9-45994 15mm 9-94816 3" Stiff Scraper 1 3 ⁄4"F x ⁄8"M 9-45988 9mm 9-45995 16mm 9-AO13640 Safety Glasses 9-4280 Universal Joint 9-45989 10mm 9-45996 17mm 9-AO40650 Safety Goggles 9-43393 6" Plastic Handle Driver 9-45990 11mm 9-45997 18mm 9-AT11SP 11" Locking C-Clamp 3/8" Drive Sockets 9-45991 12mm 9-45998 19mm 9-HLQM24 Hearing Protector 10 Twelve-Point Standard Sockets 9-45992 13mm 9-SG89800 Sanding Block 5 5 9-44329 ⁄16" 9-44335 ⁄8" Hex Keys EHT21360 Hacksaw (Challenger) 3 11 9-44331 ⁄8" 9-44336 ⁄16" 20 Standard Short and Long Arm Set KDS126 High-Low Voltage 7 16 3 4 9-44332 ⁄ " 9-44337 ⁄ " 9-46696 Includes: .050", 1⁄16", Tester 1 2 13 16 9-44333 ⁄ " 9-44338 ⁄ " 5⁄64", 3⁄32", 7⁄64", 1⁄8", KDS2038 Window Moulding 9 16 7 8 9-44334 ⁄ " 9-44339 ⁄ " 9⁄64", 5⁄32", 3⁄16", 7⁄32" Remover Tool 11 Six-Point Standard Deep Sockets and 1⁄4" short-arm KDS2822 Trim Pad Removing 3 8 3 4 9-43333 ⁄ " 9-43337 ⁄ " sizes; 5⁄64", 3⁄32", 7⁄64", Tool 7 16 13 16 9-43331 ⁄ " 9-43338 ⁄ " 1⁄8", 9⁄64", 5⁄32", 3⁄16", KDS431 Door Handle & 1 2 7 8 9-43332 ⁄ " 9-43339 ⁄ " 7⁄32" and 1⁄4" long-arm Window Lift Remover 9 15 9-43334 ⁄16" 9-43328 ⁄16" sizes; pouch. KDS485 Gasket Scraper 5 9-43335 ⁄8" 9-43329 1" KDS3786-73 Door Panel Remover 9-43336 11⁄16"

9 CFT Vo-tech '08-09 4/23/08 9:59 PM Page 10

Advanced HVAC Tool Set

13 Standard Ball End Hex Keys 9-46754 Includes .050, 1⁄16" 5⁄64", 3⁄32", 7⁄64", 1⁄8", 9⁄64", 5⁄32", 3⁄16", 7⁄32", 1⁄4", 5⁄16", 3⁄8" long arm sizes. Screwdrivers 3 Professional Phillips Screwdrivers 9-47184 #1 x 4" 9-47185 #2 x 21⁄4" 9-47186 #2 x 4" 5 Professional Slotted Screwdrivers 9-47193 1⁄4" x 21⁄4" 9-47194 1⁄4" x 4" 9-47195 1⁄4" x 6" 9-47197 5⁄16" x 6" 9-47199 3⁄8" x 8" 1 Pliers 9-45085 8" Long Reach Long Nose 4 Professional Pliers 9-45760 63⁄4" Pro Slip Joint 9-45766 101⁄2" Pro Tongue & Groove 9-45763 8" Pro Long Nose 9-45767 8" Pro Wide Jaw Diagonal 2 Hammers 9-38304 24 oz. Rubber Mallet Tip 9-38464 16 oz. Claw Other Tools 9-4099 11⁄4" Diameter Round Inspection Mirror 9-AO15902 Safety Goggles 9-RB14313 Swaging Tool 9-MC90925 Fin Straightener 9-RB14650 1⁄4" Valve Core Remover 9-37394 25' Tape measure 9-39829 9" Torpedo Level KDS2107 Mini Tubing Butter MC33661 Brass 2-Way Manifold Gauge 9-41315 Offset Screwdriver Set 9-45749 Professional Crimper Stripper Cutter KDS3457 Tubing Cutter 1⁄8" to 11⁄8" KDS2517 Tubing Bender 9-39567 Combination Square 12" 9-41028 Scratch Awl 9-94853 Retractable Utility Knife 9-94813 Wide Putty Knife KDS485 Gasket Scraper 74-553 Knife 9-31310 10" Flat File 9-31303 Rattail File 9-43591 7⁄32" 9-43596 3⁄8" ▲ Wrenches 34-93660 2AA LED Flashlight 9-200461 9-43592 1⁄4" 9-43597 7⁄16" 12 Standard Combination Wrenches 9-43593 9⁄32" 9-43598 1⁄2" 9-44699 1⁄4" 9-44696 9⁄16" Advanced HVAC Not All Tools Craftsman® Branded 9-43594 5⁄16" 9-43599 9⁄16" 9-44691 5⁄16" 9-44697 5⁄8" Tool Set - 125 Pc. 1/4" Drive Tools 9-44692 11⁄32" 9-44698 11⁄16" 9-44807 QR TD Ratchet 9-44693 3⁄8" 9-44701 3⁄4" RECOMMENDED 9-43539 3" Extension Bar 9-44694 7⁄16" 9-44702 13⁄16" 9-43531 6" Extension Bar 9-44695 1⁄2" 9-44703 7⁄8" TOOL STORAGE: 9-4280 Universal Joint 3 Professional Adjustable Wrenches 9-59165 9-43393 6" Plastic Handle Driver 9-44166 15⁄16" 6" Length Craftsman Contractor Case: 3/8" Drive Sockets 9-44167 11⁄8" 8" Length Recessed 38 1/2-inch 7 Six-Point Standard Deep Sockets 9-44168 11⁄4" 10" Length telescoping handle with 9-43333 3⁄8" 9-43335 5⁄8" 4 Standard Flare Nut Wrenches one-touch 3 7 APPLICATION: 9-43331 7⁄16" 9-43336 11⁄16" 9-44174 ⁄8" x ⁄16" button release. 5 11 Intermediate HVAC training 9-43332 1⁄2" 9-43337 3⁄4" 9-44173 ⁄8" x ⁄16" Measures 18W x 1 9 9-43334 9⁄16" 9-44171 ⁄2" x ⁄16" 15D x 12H inch. 3 7 8 Twelve-Point Standard Sockets 9-44172 ⁄4" x ⁄8" Weight 19.2 lbs. 1/4" Drive Sockets 1 Pipe Wrench 10 Twelve-Point Standard Sockets 9-44331 3⁄8" 9-44335 5⁄8" 7 11 9-51653 18" 9-43608 3⁄16" 9-43604 11⁄32" 9-44332 ⁄16" 9-44336 ⁄16" 1 3 1 Refrigeration Wrench 9-43609 7⁄32" 9-43605 3⁄8" 9-44333 ⁄2" 9-44337 ⁄4" 9 13 27-664 3⁄8"-5⁄16" sq x 1⁄4"-3⁄16" sq 9-43601 1⁄4" 9-43606 7⁄16" 9-44334 ⁄16" 9-43325 ⁄16" 9 1 3/8" Drive Tools Hex Keys 9-43602 ⁄32" 9-43607 ⁄2" 9 Blade Standard Folding Hex Key Set 9-43603 5⁄16" 9-43610 9⁄16" 9-44811 QR TD Ratchet 9-46701 Includes 5⁄64", 3⁄32", 10 Twelve-Point Standard Deep 9-43537 11⁄2" Extension Bar 7⁄64", 1⁄8", 9⁄64", 5⁄32", Sockets 9-44264 3" Extension Bar 3⁄16", 7⁄32" and 1⁄4" 9-43590 3⁄16" 9-43595 11⁄32" 9-44261 6" Extension Bar 9-4435 Universal Joint sizes.

10 ■ PROFESSIONAL ■ ADVANCED ■ BASIC ■ SPECIALTY/ACCESSORY CFT Vo-tech '08-09 4/24/08 2:43 PM Page 11

Advanced Aviation Tool Set

9-31316 61⁄4" Round 9-31317 61⁄4" Equaling 9-31318 61⁄4" 3-Square #0 Cut 5 Files 9-31211 8" Shoe 9-31303 7" Taper 9-31310 8" Mill 9-31312 8" Round 9-31311 8" Half Round Other Tools 34-93660 2AA Flashlight 9-36143 Flush-Cut Saw 9-41322 Flexible Pick-Up Tool with Spring Jaws 9-42720 3 Aviation Snips (Left Cut, Right, Cut, Straight Cut) 9-4717 5 Pc. Specialty Tool Kit (1" x 2" inspection mirror; Telescoping magnetic pick-up tool; Slotted screw starter; Phillips/Torx screw starter; Double pointed scribe) 9-90344 Tire Valve Stem Replacement Tool 9-94815 11⁄4" Wide Extra Stiff Putty Knife 9-AO50099 Respirator 9-AO51475 Respirator Cartridges 9-HLQM24 Hearing Protector 9-AO13640 Safety Glasses 1 15-0386-3100 0 - 1" Carbide-Tipped ▲ 9 Twelve-Point Metric Deep Laser 9-47185 #2 x 2 ⁄4" Micrometer 9-200583 Sockets 9-47186 #2 x 4" 9-39567 12" Combination Square 9-50667 10mm 9-50674 17mm 5 Professional Slotted Screwdrivers 1 1 1 9-37396 ⁄2" x 12' Locking Tape Advanced Aviation 9-50669 12mm 9-50675 18mm 9-47193 ⁄4" x 2 ⁄4" Measure 9-50670 13mm 9-50676 19mm 9-47194 1⁄4" x 4" Tool Set - 166 Pc. 1 9-40811 36 Blade Standard/ 9-50671 14mm 9-50677 21mm 9-47195 ⁄4" x 6" Metric Master 9-50672 15mm 9-47197 5⁄16" x 6" 3 Thickness Gauge 3/8" Drive Tools 9-47199 ⁄8" x 8" KDS2522 6" Stainless Steel Rule 9-44813 Pro FP QR TD Ratchet 7 Pc. Grip Driver II™ Ratcheting 9-43537 11⁄2" Extension Bar Magnetic Screwdriver Set Not All Tools Craftsman® Branded 9-44264 3" Extension Bar 9-47473 Driver with these bits: 9-44261 6" Extension Bar three slotted (3⁄16", 1⁄4", 9-44262 10" Extension Bar 9⁄32") and three Phillips APPLICATION: 9-44363 10" Flex T-Handle (#1, #2, #3). For student training and 9-44271 16" Speeder Bar 6 Pliers ® apprentice aviation maintenance 9-4256 Socket Adapter, 9-TP74 CLECO 3⁄8" F - 1⁄4" M 9-45087 8" Duckbill and repair 9-4258 Socket Adapter, 9-47396 Professional Small 3⁄8" F - 1⁄2" M Retaining Ring 1/4" Drive Socket Wrenches 67-905 Electrician's Stripper/ 10 Twelve-Point Standard Laser 13 Standard Full Polish Long Pattern Cutter/Crimper Sockets Combination Wrenches 9-45140 6" Wire Twisting 9-45803 3⁄16" 9-45809 11⁄32" 9-45973 1⁄4" 9-45980 11⁄16" 9-45142 9" Wire Twisting 9-45804 7⁄32" 9-45811 3⁄8" 9-45974 5⁄16" 9-45981 3⁄4" 4 Professional Pliers 9-45806 1⁄4" 9-45812 7⁄16" 9-45975 3⁄8" 9-45982 13⁄16" 9-45760 63⁄4" Pro Slip Joint 9-45807 9⁄32" 9-45813 1⁄2" 9-45976 7⁄16" 9-45983 7⁄8" 9-45766 101⁄2" Pro Tongue & 9-45808 5⁄16" 9-45810 9⁄16" 9-45977 1⁄2" 9-45984 15⁄16 Groove 9 Twelve-Point Standard Deep Laser 9-45978 9⁄16" 9-45985 1" 9-45763 8" Pro Long Nose Sockets 9-45979 5⁄8" 9-45767 8" Pro Wide Jaw 9-50610 3⁄16" 9-50616 3⁄8" 1 Combination Wrench Diagonal 9-50611 7⁄32" 9-50617 7⁄16" 9-44692 11⁄32" 2 Hammers RECOMMENDED 9-50612 1⁄4" 9-50618 1⁄2" 3 Professional Adjustable Wrenches 9-38292 12 oz. 121⁄2" Plastic Tip TOOL STORAGE: 9-50613 9⁄32" 9-50619 9⁄16" 9-44166 15⁄16" 6" Length 9-38465 16 oz. Hickory Handle 9-2117 9-50614 5⁄16" 9-44167 11⁄8" 8" Length Ball Pein “Long Distance” Tool Cart, 1/4" Drive Tools 9-44168 11⁄4" 10" Length 11 Punches & Chisels 41" 14-Drawer Cart 9-44812 Pro FP QR TD Ratchet 10 Standard Comb. Ignition Wrenches 9-42881 1⁄16" Pin 5 1 3 9-43538 11⁄2" Extension Bar 9-42320 ⁄32" 9-42325 ⁄4" 9-42882 ⁄32" Pin 9-43539 3" Extension Bar 9-42321 3⁄16" 9-42326 9⁄32" 9-42883 1⁄8" Pin 13 5 5 Consider Advanced 9-43531 6" Extension Bar 9-42322 ⁄64" 9-42327 ⁄16" 9-42884 ⁄32" Pin Aviation Add-on Set, 9-4336 Flex Extension 9-42323 7⁄32" 9-42328 3⁄8" 9-42901 5⁄32" Line-Up 9-43393 6" Spinner Handle 9-42324 15⁄64" 9-42329 7⁄16" 9-42861 3⁄8"x 41⁄2" Center Punch 27-895 9-43523 6" Flex T-Handle 1 Standard Box End Wrench 9-42862 1⁄2" x 6" Center Punch 9-4281 Speeder Wrench 9-43919 1⁄4"x 5⁄16" 9-42971 Cold Chisel, 1⁄4"x 4" 3/8" Drive Sockets 13 Standard Ball End Hex Keys 9-42972 Cold Chisel, 3⁄8"x 5" 9 Twelve-Point Standard Deep Laser 9-46754 Includes .050, 1⁄16" 5⁄64", 9-42973 Cold Chisel, 1⁄2" x 53⁄4" Sockets 3⁄32", 7⁄64", 1⁄8", 9⁄64", 5⁄32", EHT33201 6" x 3⁄8" Brass Punch 9-50656 7⁄16" 9-50662 13⁄16" 3⁄16", 7⁄32", 1⁄4", 5⁄16", 3⁄8" Files 9-50657 1⁄2" 9-50663 7⁄8" long arm sizes. 6 Needle Files 9-50658 9⁄16" 9-50664 15⁄16" Screwdrivers 9-31313 61⁄4" Flat 9-50659 5⁄8" 9-50665 1" 3 Professional Phillips Screwdrivers 9-31314 61⁄4" Half Round 9-50661 3⁄4" 9-47184 #1 x 4" 9-31315 61⁄4" Square

11 CFT Vo-tech '08-09 4/23/08 9:59 PM Page 12

Basic Auto/Diesel Tool Set

9-44254 12mm 9-44259 19mm 9-44255 13mm 9-44278 21mm 9-44256 14mm 9-44265 22mm 9-44257 15mm 1/2" Drive Tool 9-44809 QR TD Ratchet Wrenches 8 Standard Combination Wrenches 9-44691 5⁄16" 9-44696 9⁄16" 9-44693 3⁄8" 9-44701 3⁄4" 9-44694 7⁄16" 9-44702 13⁄16" 9-44695 1⁄2" 9-44703 7⁄8"

9 Metric Combination Wrenches 9-42909 6mm 9-42918 14mm 9-42913 9mm 9-42919 15mm 9-42914 10mm 9-42924 16mm 9-42916 12mm 9-42929 17mm 9-42917 13mm 1 Adjustable Wrench 9-44604 11⁄4" 10" Length Screwdrivers 4 Phillips Screwdrivers 9-41293 #0 x 21⁄2" 9-41294 #1 x 3" 9-41295 #2 x 4" 9-41853 #2 x 6" 4 Slotted Screwdrivers 9-41421 1⁄8" x 2" 9-41589 1⁄8" x 4" 9-41583 1⁄4" x 4" 9-41577 3⁄16"x 6" Nutdrivers 5 Standard Nutdrivers 9-41971 1⁄4" 9-41975 7⁄16" 9-41972 5⁄16" 9-41976 1⁄2" 9-41974 3⁄8" 5 Metric Nutdrivers 9-41982 6mm 9-41986 10mm 9-41983 7mm 9-41987 11mm 9-41984 8mm 4 Pliers 9-45076 7" Diagonal 9-45378 63⁄4" Slip Joint 9-45103 8" Long Nose 9-45381 91⁄2" Tongue & Groove 3 Hammers 9-38292 12 oz. Plastic Tip 9-38465 16 oz. Ball Pein 9-38466 24 oz. Ball Pein Hex Keys --- 11 Standard Hex Keys Punches and Chisels 2 Cold Chisels 11 Six-Point Metric Deep Sockets 11 Six-Point Metric Deep Sockets 1 ▲ 9-42973 ⁄2" Cold Chisel 9-200497 9-44401 4mm 9-44407 10mm 9-44425 9mm 9-44432 15mm 9-42974 5⁄8" Cold Chisel 9-44402 5mm 9-44408 11mm 9-44426 10mm 9-44433 16mm 3 Punches Basic Auto/Diesel 9-44403 6mm 9-44409 12mm 9-44427 11mm 9-44434 17mm 9-42883 1⁄8" Pin Punch Tool Set - 205 Pc. 9-44404 7mm 9-44411 13mm 9-44428 12mm 9-44435 18mm 9-42885 3⁄16" Pin Punch 9-44405 8mm 9-44412 14mm 9-44429 13mm 9-44436 19mm 9-42861 3⁄8" Center Punch 9-44406 9mm 9-44431 14mm Other Tools 1/4" Drive Tools 1 Six-Point Spark Plug Socket KDS126 High-Low Voltage APPLICATION: 9-44807 QR TD Ratchet 9-43325 13⁄16" Introduction to auto, diesel and Tester 9-44346 3" Locking Extension Bar 3/8" Drive Tools 9-40811 36 Blade Standard/ construction equipment 9-43539 3" Extension Bar 9-44811 QR TD Ratchet Metric Master 1/4" Drive Sockets 9-4280 Universal Joint 9-44264 3" Extension Bar Thickness Gauge 11 Six-Point Standard Sockets 3/8" Drive Sockets 9-4435 Universal Joint 9-AO15902 Safety Glasses 5 11 9-43481 ⁄32" 9-43496 ⁄32" 9 Six-Point Standard Sockets 1/2" Drive Sockets 9-4283 Pry Bar, 1⁄2" x 16" 9-43491 3⁄16" 9-43497 3⁄8" 9-43001 3⁄8" 9-43006 11⁄16" 13 Six-Point Standard Sockets 9-43373 Magnetic Handle 9-43492 7⁄32" 9-43498 7⁄16" 9-43002 7⁄16" 9-43007 3⁄4" 9-44054 7⁄16" 9-44064 7⁄8" --- 10 Pc. Screwdriver Bit Set 9-43493 1⁄4" 9-43499 1⁄2" 9-43003 1⁄2" 9-43008 13⁄16" 9-44055 1⁄2" 9-44065 15⁄16" 9 9 9 7 9 9-43494 ⁄32" 9-43480 ⁄16" 9-43004 ⁄16" 9-43013 ⁄8" 9-44056 ⁄16" 9-44066 1" Not All Tools Craftsman® Branded 9-43495 5⁄16" 9-43005 5⁄8" 9-44057 5⁄8" 9-44067 11⁄16" 10 Six-Point Standard Deep Sockets 9-44058 11⁄16" 9-44068 11⁄8" 9-43571 3⁄16" 9-43576 11⁄32" 9 Six-Point Standard Deep Sockets 9-44059 3⁄4" 9-44069 11⁄4" 9-43572 7⁄32" 9-43577 3⁄8" 9-43333 3⁄8" 9-43336 11⁄16" 9-44063 13⁄16" 9-43573 1⁄4" 9-43578 7⁄16" 9-43331 7⁄16" 9-43337 3⁄4" 11 Six-Point Standard Deep Sockets 9-43574 9⁄32" 9-43589 1⁄2" 9-43332 1⁄2" 9-43338 13⁄16" 9-47582 1⁄2" 9-47588 7⁄8" 9-43575 5⁄16" 9-43587 9⁄16" 9-43334 9⁄16" 9-43339 7⁄8" 9-47583 9⁄16" 9-47589 15⁄16" 12 Six-Point Metric Sockets 9-43335 5⁄8" 9-47584 5⁄8" 9-47591 1" 9-43505 4mm 9-43507 9mm 12 Six-Point Metric Sockets 9-47585 11⁄16" 9-47592 11⁄16" 9-43501 5mm 9-43508 10mm 9-43541 9mm 9-43547 15mm 9-47586 3⁄4" 9-47593 11⁄8" 9-43511 5.5mm 9-43509 11mm 9-43542 10mm 9-43570 16mm 9-47587 13⁄16" 9-43502 6mm 9-43513 12mm 9-43543 11mm 9-43548 17mm 13 Six-Point Metric Sockets 9-43503 7mm 9-43514 13mm 9-43544 12mm 9-43579 18mm 9-44251 9mm 9-44273 16mm 9-43504 8mm 9-43512 14mm 9-43545 13mm 9-43549 19mm 9-44252 10mm 9-44258 17mm 9-43546 14mm 9-43580 20mm 9-44253 11mm 9-44228 18mm

12 ■ PROFESSIONAL ■ ADVANCED ■ BASIC ■ SPECIALTY/ACCESSORY CFT Vo-tech '08-09 4/23/08 9:59 PM Page 13

Basic Auto Body and Basic HVAC Tool Sets

9-41028 Scratch Awl 9-42713 10" Compound Leverage ▲ 9-200452 Snips - Straight Cut Basic Auto Body 9-SL6211 Spark Lighter 9-45711 7" Straight Jaw Locking Tool Set-18 Pc. Pliers

APPLICATION: Not All Tools Craftsman® Branded Introduction to auto body training 3 Hammers 9-47288 Cross Chisel 9-47290 Shrinking 9-47298 Utility Pick 4 Dollies 9-47293 Toe 9-47294 Heel 9-47295 General Purpose 9-47292 Light Dinging Spoon Other Tools KDS2822 Trim Pad Removing Tool KDS431 Door Handle & Window Lift Remover EHT21360 Hacksaw (Challenger) RECOMMENDED 9-SG89800 Sanding Block 9-SG89920 Sanding Board TOOL STORAGE: 9-16387 Heavy Duty Blow Gun 9-59212 9-3669 Shoehandle Wire Brush Craftsman 20 in. Wide Extra-Deep Steel Toolbox ▲ 9-200445 Basic HVAC Tool Set - 61 Pc.

APPLICATION: Introduction to HVAC training

Wrenches 9 Standard Combination Wrenches 9-44699 1⁄4" 9-44695 1⁄2" 9-44691 5⁄16" 9-44696 9⁄16" 9-44692 11⁄32" 9-44697 5⁄8" 9-44693 3⁄8" 9-44701 3⁄4" 9-44694 7⁄16" 3 Adjustable Wrenches 9-44602 15⁄16" 6" Length 9-44603 11⁄8" 8" Length 9-44604 11⁄4" 10" Length Hex Keys 14 Standard Short and Long Arm Set 9-46683 Includes .050, 1⁄16" 5⁄64", 3⁄32", 7⁄64", 9⁄64" short arm sizes; 7⁄64", 1⁄8", 9⁄64", 5⁄32", 3⁄16", 7⁄32", 1⁄4", 5⁄16" long arm sizes, pouch. Screwdrivers 4 Phillips Screwdrivers 9-41293 #0 x 21⁄2" 9-41294 #1 x 3" 9-41295 #2 x 4" 9-41853 #2 x 6" 5 Pliers Measure 4 Slotted Screwdrivers 9-45093 7" Linesman 9-39829 9" Torpedo Level 1 9-GT321 HVAC Thermometer 9-41421 1⁄8" x 2" 9-45102 6 ⁄2" Long-Nose 9-41315 Offset Screwdriver 9-41589 1⁄8" x 4" 9-45711 7" Pro Straight Jaw 9-41583 1⁄ " x 4" Locking 9-45749 Professional Crimper 4 Stripper Cutter 9-41588 3⁄16"x 6" 9-45381 Tongue & Groove 9-45378 Slip Joint 9-39567 Combination Square 12" 7 Nut Drivers 9-38092 16 oz. Claw Hammer 9-41977 3⁄16" Other Tools KDS3457 Tubing Cutter 1⁄8" to 11⁄8" 9-41971 1⁄4" 9-82563 Electrical Repair Tool KDS2107 Mini Tubing Cutter 9-41972 5⁄16" 9-41028 Scratch Awl KDS2198 Flaring Tool RECOMMENDED 9-41973 11⁄32" 9-94853 Retractable Aluminum 9-3971 5" Pocket Level 9-41974 3⁄8" Utility Knife TOOL STORAGE: 7 9-RG31622 Enclosed Feed Cutter 9-59212 9-41975 ⁄16" Not All Tools Craftsman® Branded 9-41976 1⁄2" 9-37391 1" x 25' Locking Tape Craftsman 20 in. Wide Extra-Deep Steel Toolbox

13 CFT Vo-tech '08-09 4/24/08 2:43 PM Page 14

Basic Aviation and Basic Machine Trade Tool Sets

7 Pc. Grip Driver II™ Ratcheting Magnetic Screwdriver Set 9-47473 Driver with these bits: three slotted (3⁄16", 1⁄4", 9⁄32") and three Phillips (#1, #2, #3). 5 Pliers 9-45087 8" Duckbill 9-45076 7" Diagonal 9-45103 8" Long Nose 9-45378 63⁄4" Slip Joint 9-45381 91⁄2" Tongue & Groove Other Tools 34-82563 Electrical Repair Tool 9-4717 5 Pc. Specialty Tool Kit (1" x 2" inspection mirror; Telescoping magnetic pick-up tool; Slotted screw starter; Phillips/Torx screw starter; Double pointed scribe ) 9-94815 11⁄4" Wide Extra Stiff Putty Knife 9-AO15902 Safety Glasses 9-HLQM24 Hearing Protector KDS2522 6" Stainless Steel Rule

Not All Tools Craftsman® Branded 10 Twelve-Point Standard Deep 9-45974 5⁄16" 9-45981 3⁄4" ▲ 9-200356 Laser Sockets 9-45975 3⁄8" 9-45982 13⁄16" 9-50610 3⁄16" 9-50615 11⁄32"" 9-45976 7⁄16" 9-45983 7⁄8" Basic Aviation 9-50611 7⁄32" 9-50616 3⁄8" 9-45977 1⁄2" 9-45984 15⁄16" 9-50612 1⁄4" 9-50617 7⁄16" 9-45978 9⁄16" 9-45985 1" Tool Set - 73 Pc. 9-50613 9⁄32" 9-50618 1⁄2" 9-45979 5⁄8" 9-50614 5⁄16" 9-50619 9⁄16" 2 Adjustable Wrenches 1/4" Drive Tools 9-44603 11⁄8" 8" Length Application: 9-44807 QR TD Ratchet 9-44605 11⁄2" 12" Length Introduction to Aviation training 9-43538 11⁄2" Extension Bar Screwdrivers 9-43539 3" Extension Bar 4 Phillips Screwdrivers 9-43531 6" Extension Bar 9-41293 #0 x 21⁄2" 1/4" Drive Sockets 9-4336 Flex Extension 9-41294 #1 x 3" Recommended 10 Twelve-Point Standard Laser 9-43393 6" Spinner Handle 9-41295 #2 x 4" Tool Storage: Sockets 9-59212 3 11 9-43523 6" Flex T-Handle 9-41853 #2 x 6" 9-45803 ⁄16" 9-45809 ⁄32" 9-4281 Speeder Wrench 4 Slotted Screwdrivers Craftsman 20 in. Wide 9-45804 7⁄32" 9-45811 3⁄8" Wrenches 9-41421 1⁄8" x 2" Extra-Deep Steel Toolbox 9-45806 1⁄4" 9-45812 7⁄16" 13 Standard Full Polish 9-41589 1⁄8" x 4" 9-45807 9⁄32" 9-45813 1⁄2" Combination Wrenches 9-41583 1⁄4" x 4" 9-45808 5⁄16" 9-45810 9⁄16" 9-45973 1⁄4" 9-45980 11⁄16" 9-41588 3⁄16"x 6" ▲ 9-200385 Basic Machine Trade Tool Set - 35 Pc.

Application: Introduction to machining

1 Adjustable Wrench 9-44604 11⁄4" 10" Length Hex Keys 14 Standard Short and Long Arm Set 9-46683 Includes .050, 1⁄16" 5⁄64", 3⁄32", 7⁄64", 9⁄64" short arm sizes; 7⁄64", 1⁄8", 9⁄64", 5⁄32", 3⁄16", 7⁄32", 1⁄4", 5⁄16" long arm sizes, pouch. 1 Screwdriver 9-41581 3⁄16" x 4" Slotted 1 Pliers 9-45379 8" Slip-Joint Pliers with Wire-Cutting Slot 1 Hammer 9-38464 12 oz. Hickory Handle Ball Pein 2 Punches 9-42861 3⁄8" x 41⁄2" Center Punch 9-38776 3 Pc. Machinists Tool 9-GH4566 Hermaphrodite Caliper 9-40407 Machinists Square 9-GH79 Automatic Center Punch Kit (Caliper; Dial; 0-6 9-GH83 1⁄4" Pocket Scriber 9-52317 Standard Pitch Gauge Other Tools in. Range) 9-GHCF778 Center Gauge 9-DMWMF 4" Machinists Pocket 9-GH17 Protractor 9-39567 12" Combination Square Not All Tools Craftsman® Branded 9-38738 Dial Indicator 9-GH262 1⁄2" Edge Finders 9-37395 3⁄4" x 20' Locking Tape 9-GH4504 4" Dividers Measure

14 ■ PROFESSIONAL ■ ADVANCED ■ BASIC ■ SPECIALTY/ACCESSORY CFT Vo-tech '08-09 4/23/08 9:59 PM Page 15

235 PC. Basic Field Technician Set ▲ 9-41200 Basic Field Technician Set - 235 Pc. APPLICATION: Maintenance and repair of machine and equipment at remote locations

1/4" Drive Sockets 11 Six-Point Standard Sockets 9-43481 5⁄32" 9-43496 11⁄32" 9-43491 3⁄16" 9-43497 3⁄8" 9-43492 7⁄32" 9-43498 7⁄16" 9-43493 1⁄4" 9-43499 1⁄2" 9-43494 9⁄32" 9-43480 9⁄16" 9-43495 5⁄16" 10 Six-Point Standard Deep Sockets 9-43571 3⁄16" 9-43576 11⁄32" 9-43572 7⁄32" 9-43577 3⁄8" 9-43573 1⁄4" 9-43578 7⁄16" 9-43574 9⁄32" 9-43589 1⁄2" 9-43575 5⁄16" 9-43587 9⁄16" 12 Six-Point Metric Sockets 9-43505 4mm 9-43507 9mm 9-43501 5mm 9-43508 10mm 9-43511 5.5mm 9-43509 11mm 9 Six-Point Metric Deep Sockets 9-44521 16 x 18mm 9-45104 6" Bent Needle Nose 9-43502 6mm 9-43513 12mm 9-44425 9mm 9-44431 14mm 9-44508 17 x 19mm 9-45173 41⁄2" Long Needle Nose 9-43503 7mm 9-43514 13mm 9-44426 10mm 9-44432 15mm 10 Standard Combination Ignition 9-45171 4" Needle Nose 9-43504 8mm 9-43512 14mm 9-44427 11mm 9-44433 16mm Wrenches 9-45172 5" Mini Diagonal 11 Six-Point Metric Deep Sockets 9-44428 12mm 9-44434 17mm 9-42320 5⁄32" 9-42325 1⁄4" Cutting 9-44401 4mm 9-44407 10mm 9-44429 13mm 9-42321 3⁄16" 9-42326 9⁄32" 9-45077 5" Diagonal Cutting 9-44402 5mm 9-44408 11mm 4 Phillips Bit Sockets 9-42322 13⁄64" 9-42327 5⁄16" 9-45378 63⁄4" Slip Joint 9-44403 6mm 9-44409 12mm 9-44369 #1 9-44372 #3 9-42323 7⁄32" 9-42328 3⁄8" 9-45385 7" Arc Joint 9-44404 7mm 9-44411 13mm 9-44371 #2 9-44373 #4 9-42324 15⁄64" 9-42329 7⁄16" 2 Hammers 9-44405 8mm 9-44412 14mm 3 Slotted Bit Sockets 10 Metric Combination Ignition 9-38292 12 oz. Plastic Tip 9-44406 9mm 9-42651 .030 Wrenches 9-38463 8 oz. Ball Pein Hammer 2 Phillips Bit Sockets 9-42653 .055 9-42340 4mm 9-42345 7mm Other Tools 9-42681 #1 9-42682 #2 9-42652 .039 9-42341 4.5mm 9-42346 8mm 9-40811 36 Blade Comb. Gauge 2 Slotted Bit Sockets 4 Torx® Bit Sockets 9-42342 5mm 9-42347 9mm 9-4319 Cotter Key Extractor 9-42691 7⁄32" 9-42692 1⁄4" 9-42664 T-30 9-42666 T-45 9-42343 5.5mm 9-42348 10mm 9-41322 23" Flex Pick-up Tool ® 3 Torx Bit Sockets 9-42665 T-40 9-42667 T-50 9-42344 6mm 9-42349 11mm 9-41028 Scratch Awl 9-42661 T-15 9-42663 T-25 3/8" Drive Tools Nut Drivers 9-47696 Circuit Tester 9-42662 T-20 9-44808 QR TD Ratchet Long 6 Standard Nut Drivers 9-42901 5⁄32" x 7" Line Up 1/4" Drive Tools 9-43537 11⁄2" Extension Bar 9-41977 3⁄16" 9-41974 3⁄8" Punch 1 7 9-44807 QR TD Ratchet 9-44264 3" Extension Bar 9-41971 ⁄4" 9-41975 ⁄16" 9-41603 21/4" Inspection Mirror 5 1 9-43538 11⁄2" Extension Bar 9-44261 6" Extension Bar 9-41972 ⁄16" 9-41976 ⁄2" 9-4513 5" Ignition Pliers 9-43539 3" Extension Bar 9-44262 10" Extension Bar 6 Metric Nutdrivers 9-43275 12" Curved Pry Bar 9-43531 6" Extension Bar 9-4256 3⁄8" - 1⁄4" Adapter 9-41981 5mm 9-41984 8mm 9-42862 1⁄2" x 6" Center Punch 9-43532 14" Extension Bar 9-4435 Universal Joint 9-41982 6mm 9-41985 9mm 9-42881 1⁄16" Pin Punch 9-4280 Universal Joint Wrenches 9-41983 7mm 9-41986 10mm 9-43372 6" Spinner Handle 3 Standard Offset Full Polish Deep Hex Keys Not All Tools Craftsman® Branded 9-4336 Flex Extension Box End Wrenches 13 Standard Ball End Hex Keys 1 5 3/8" Drive Sockets 9-44316 3⁄8" x 7⁄16" 9-46754 Includes .050, ⁄16" ⁄64", 3 7 1 9 5 12 Six-Point Standard Sockets 9-44317 1⁄2" x 9⁄16" ⁄32", ⁄64", ⁄8", ⁄64", ⁄32", 3 7 1 5 3 9-42999 1⁄4" 9-43005 5⁄8" 9-44318 5⁄8" x 11⁄16" ⁄16", ⁄32", ⁄4", ⁄16", ⁄8" 9-43000 5⁄16" 9-43006 11⁄16" 3 Metric Offset Full Polish Deep Box long arm sizes. 9-43001 3⁄8" 9-43007 3⁄4" End Wrenches 13 Metric Ball End Hex Keys 9-43002 7⁄16" 9-43008 13⁄16" 9-44360 10 x 11mm 9-47755 Includes 1.5, 2, 2.5, 3, 4, 9-43003 1⁄2" 9-43013 7⁄8" 9-44361 12 x 14mm 4.5, 5, 5.5, 6, 7, 8, 9, RECOMMENDED 9-43004 9⁄16" 9-43020 15⁄16" 9-44362 13 x 15mm 10mm long arm sizes. TOOL STORAGE: 17 Six-Point Metric Sockets 1 Adjustable Wrench Screwdrivers 9-59165 1 9-43516 6mm 9-43547 15mm 9-44603 1 ⁄8" 8" Length 5 Phillips Screwdrivers Craftsman Contractor Case: 9-43533 7mm 9-43570 16mm 9-41293 #0 x 21⁄2" 7 Standard Open End Wrenches Recessed 38 1/2-inch 9-43536 8mm 9-43548 17mm 1 5 9-41294 #1 x 3" 9-44571 ⁄4" x ⁄16" telescoping handle with 9-43541 9mm 9-43579 18mm 9-44572 3⁄8" x 7⁄16" 9-41295 #2 x 4" one-touch 9-43542 10mm 9-43549 19mm 9-44579 1⁄2" x 9⁄16" 9-41297 #3 x 6" button release. 9-43543 11mm 9-43580 20mm 9-44592 9⁄16" x 5⁄8" 9-41025 Screw Starter Measures 18W x 9-43544 12mm 9-43584 21mm 9-44582 5⁄8" x 3⁄4" 5 Slotted Screwdrivers 15D x 12H inch. 9-43545 13mm 9-43585 22mm 9-44591 11⁄16" x 13⁄16" 9-41589 1⁄8" x 4" Weight 19.2 lbs. 9-43546 14mm 9-44584 3⁄4" x 7⁄8" 9-41581 3⁄16" x 4" 9 Six-Point Standard Deep Sockets 7 Metric Open End Wrenches 9-41584 1⁄4" x 6" 9-43333 3⁄8" 9-43336 11⁄16" 9-44502 6 x 8mm 9-41585 1⁄4" x 12" 9-43331 7⁄16" 9-43337 3⁄4" 9-44503 7 x 9mm 9-41024 Screw Starter 9-43332 1⁄2" 9-43338 13⁄16" 9-44504 10 x 11mm 9 Pliers 9-43334 9⁄16" 9-43339 7⁄8" 9-44506 12 x 14mm 9-45102 6" Long Needle Nose 9-43335 5⁄8" 9-44507 13 x 15mm 9-45174 41⁄2" Bent Needle Nose

15 CFT Vo-tech '08-09 4/23/08 9:59 PM Page 16

145 PC. Basic Field Technician Set

▲ 1/4" Drive Tools 9-44591 11⁄16" x 13⁄16" 1 Hammer 9-41203 9-44807 QR TD Ratchet 5 Metric Open End Wrenches 9-38463 8 oz. Ball Pein 9-43538 11⁄2" Extension Bar 9-44503 7mm x 9mm Hammer Basic Field 9-43539 3" Extension Bar 9-44504 10mm x 11mm Other Tools 9-43531 6" Extension Bar 9-44506 12mm x 14mm 9-41322 23" Flexible Pick-up Technician Set - 9-4280 Universal Joint 9-44507 13mm x 15mm Tool 145 Pc. 9-43372 6" Spinner Handle 9-44508 17mm x 19mm 9-41603 21⁄4" Inspection Mirror 3/8" Drive Sockets 10 Standard Combination Ignition 9-41028 Scratch Awl 10 Six-Point Standard Sockets Wrenches 9-47696 Circuit Tester APPLICATION: 9-43001 3⁄8" 9-43006 11⁄16" 9-42320 5⁄32" 9-42325 1⁄4" 9-43002 7⁄16" 9-43007 3⁄4" 9-42321 3⁄16" 9-42326 9⁄32" Not All Tools Craftsman® Branded Maintenance and repair of 9-43003 1⁄2" 9-43008 13⁄16" 9-42322 13⁄64" 9-42327 5⁄16" machine and equipment at 9-43004 9⁄16" 9-43013 7⁄8" 9-42323 7⁄32" 9-42328 3⁄8" remote locations 9-43005 5⁄8" 9-43020 15⁄16" 9-42324 15⁄64" 9-42329 7⁄16" 10 Six-Point Metric Sockets 10 Metric Combination Ignition RECOMMENDED 1/4" Drive Sockets 9-43542 10mm 9-43547 15mm Wrenches 9-42340 4mm 9-42345 7mm 11 Six-Point Standard Sockets 9-43543 11mm 9-43570 16mm TOOL STORAGE: 9-43544 12mm 9-43548 17mm 9-42341 4.5mm 9-42346 8mm 9-43481 5⁄32" 9-43496 11⁄32" 9-59165 9-43545 13mm 9-43579 18mm 9-42342 5mm 9-42347 9mm 9-43491 3⁄16" 9-43497 3⁄8" Craftsman Contractor Case: 9-43546 14mm 9-43549 19mm 9-42343 5.5mm 9-42348 10mm 9-43492 7⁄32" 9-43498 7⁄16" Recessed 38 1/2-inch 3 Torx® Bit Sockets 9-42344 6mm 9-42349 11mm 9-43493 1⁄4" 9-43499 1⁄2" telescoping handle with 9-42664 T-30 9-42666 T-45 14 Ball End Hex Key Set 9-43494 9⁄32" 9-43480 9⁄16" one-touch 9-42665 T-40 9-46756 Includes 5⁄64", 3⁄32", 9-43495 5⁄16" 1⁄8", 5⁄32", 3⁄16", 1⁄4", button release. 9 Six-Point Standard Deep Sockets 3/8" Drive Tools 9-44808 QR TD Long Ratchet 5⁄16" standard long arm Measures 18W x 9-43571 3⁄16" 9-43575 5⁄16" 9-43537 11⁄2" Extension Bar and 2, 2.5, 3, 4, 5, 6, 15D x 12H inch. 9-43572 7⁄32" 9-43576 11⁄32" 9-44264 3" Extension Bar 8mm metric long arm Weight 19.2 lbs. 9-43573 1⁄4" 9-43577 3⁄8" 9-44261 6" Extension Bar sizes. 9-43574 9⁄32" 9-43578 7⁄16" 9-4435 Universal Joint Screwdrivers 9-43589 1⁄2" 4 Phillips Screwdrivers 11 Six-Point Metric Sockets Wrenches 3 Standard Offset Full Polish Deep 9-41293 #0 x 21⁄2" 9-43505 4mm 9-43508 10mm Box End Wrenches 9-41294 #1 x 3" 9-43501 5mm 9-43509 11mm 9-44316 3⁄8" x 7⁄16" 9-41295 #2 x 4" 9-43502 6mm 9-43513 12mm 9-44317 1⁄2" x 9⁄16" 9-4118 #2 x 11⁄2" 9-43503 7mm 9-43514 13mm 9-44318 5⁄8" x 11⁄16" 4 Slotted Screwdrivers 9-43504 8mm 9-43512 14mm 3 Metric Offset Full Polish Deep Box 9-41589 1⁄8" x 4" 9-43507 9mm 9-41577 3⁄16" x 6" 9 Six-Point Metric Deep Sockets End Wrenches 9-44360 10mm x 11mm 9-41585 1⁄4" x 12" 9-44401 4mm 9-44406 9mm 9-44361 12mm x 14mm 9-4151 1⁄4" x 11⁄2" 9-44402 5mm 9-44407 10mm 9-44362 13mm x 15mm 5 Pliers 9-44403 6mm 9-44408 11mm 5 Standard Open End Wrenches 9-45174 41⁄2" Bent Needle Nose 9-44404 7mm 9-44409 12mm 9-44571 1⁄4" x 5⁄16" 9-45102 6" Long Needle Nose 9-44405 8mm 3 7 9-45077 5" Diagonal Cutting 3 Torx® Bit Sockets 9-44572 ⁄8" x ⁄16" 1 9 9-45378 63⁄4" Slip Joint 9-42661 T-15 9-42663 T-25 9-44579 ⁄2" x ⁄16" 5 3 9-4513 5" Ignition 9-42662 T-20 9-44582 ⁄8" x ⁄4"

16 ■ PROFESSIONAL ■ ADVANCED ■ BASIC ■ SPECIALTY/ACCESSORY CFT Vo-tech '08-09 4/23/08 9:59 PM Page 17

96 PC. Basic Field Technician Set

1/4" Drive Tools 10 Standard Combination Ignition 1 Hammer ▲ 9-41206 9-44807 QR TD Ratchet Wrenches 9-38463 8 oz. Ball Pein 9-43539 3" Extension Bar 9-42320 5⁄32" 9-42325 1⁄4" Hammer Basic Field 9-43531 6" Extension Bar 9-42321 3⁄16" 9-42326 9⁄32" Other Tools 9-43372 6" Spinner Handle 9-42322 13⁄64" 9-42327 5⁄16" 9-41322 23" Flex Pick-Up Tool Technician Set - 9-4280 Universal Joint 9-42323 7⁄32" 9-42328 3⁄8" 9-41603 21⁄4" Inspection Mirror 3/8" Drive Sockets 9-42324 15⁄64" 9-42329 7⁄16" 9-41028 Scratch Awl 96 Pc. 11 Six-Point Standard Sockets 14 Ball End Hex Key Set 9-47696 Circuit Tester 9-42999 1⁄4" 9-43005 5⁄8" 9-46756 Includes 5⁄64", 3⁄32", APPLICATION: 9-43000 5⁄16" 9-43006 11⁄16" 1⁄8", 5⁄32", 3⁄16", 1⁄4", Not All Tools Craftsman® Branded 5 Maintenance and repair of 9-43001 3⁄8" 9-43007 3⁄4" ⁄16" standard long 9-43002 7⁄16" 9-43008 13⁄16" arm and 2, 2.5, 3, 4, machine and equipment at 9-43003 1⁄2" 9-43013 7⁄8" 5, 6, 8mm metric long RECOMMENDED remote locations 9-43004 9⁄16" arm sizes. 3/8" Drive Tools Screwdrivers TOOL STORAGE: 1/4" Drive Sockets 9-44808 QR TD Long Ratchet 3 Phillips Screwdrivers 9-59165 11 Six-Point Standard Sockets 9-43537 11⁄2" Extension Bar 9-41294 #1 x 3" Craftsman Contractor Case: 9-43481 5⁄32" 9-43496 11⁄32" 9-44264 3" Extension Bar 9-41295 #2 x 4" Recessed 38 1/2-inch 1 2 9-43491 3⁄16" 9-43497 3⁄8" 9-44261 6" Extension Bar 9-4118 #2 x 1 ⁄ " telescoping handle with 9-43492 7⁄32" 9-43498 7⁄16" 9-4435 Universal Joint 5 Slotted Screwdrivers one-touch 1 8 9-43493 1⁄4" 9-43499 1⁄2" Wrenches 9-41589 ⁄ " x 4" button release. 3 16 9-43494 9⁄32" 9-43480 9⁄16" 3 Standard Offset Full Polish Deep 9-41577 ⁄ " x 6" Measures 18W x 1 4 1 2 9-43495 5⁄16" Box End Wrenches 9-4151 ⁄ " x 1 ⁄ " 15D x 12H inch. 9 Six-Point Standard Deep Sockets 9-44316 3⁄8" x 7⁄16" 9-41314 Offset Weight 19.2 lbs. 1 9 9-43571 3⁄16" 9-43576 11⁄32" 9-44317 ⁄2" x ⁄16" 9-41316 Offset 5 11 ® 9-43572 7⁄32" 9-43577 3⁄8" 9-44318 ⁄8" x ⁄16" 3 Torx Screwdrivers 9-43573 1⁄4" 9-43578 7⁄16" 6 Standard Open End Wrenches 9-41473 T-10 9-41475 T-20 1 5 9-43574 9⁄32" 9-43589 1⁄2" 9-44571 ⁄4" x ⁄16" 9-41474 T-15 5 3 9-43575 5⁄16" 9-44582 ⁄8" x ⁄4" 3 Pliers 3 Torx® Bit Sockets 9-44572 3⁄8" x 7⁄16" 9-45102 6" Long Needle Nose 9-42661 T-15 9-42663 T-25 9-44591 11⁄16" x 13⁄16" 9-45077 5" Diagonal Cutting 3 9-42662 T-20 9-44579 1⁄2" x 9⁄16" 9-45378 6 ⁄4" Slip Joint 9-44584 3⁄4" x 7⁄8"

17 CFT Vo-tech '08-09 4/23/08 9:59 PM Page 18

Basic Industrial Maintenance Tool Set

9-44694 7⁄16" 9-44703 7⁄8" 9-44695 1⁄2" 9-44704 15⁄16" 9-44696 9⁄16" 9-44705 1" 9-44697 5⁄8" 9-44706 11⁄16" 9-44698 11⁄16" 9-44707 11⁄8" 9-44701 3⁄4" 9-44708 11⁄4" 7 Standard Box End Wrenches 9-43919 1⁄4" x 5⁄16" 9-43922 3⁄8" x 7⁄16" 9-43923 1⁄2" x 9⁄16" 9-43926 5⁄8" x 3⁄4" 9-43927 11⁄16" x 13⁄16" 9-43928 3⁄4" x 7⁄8" 9-43929 15⁄16" x 1" Hex Keys 14 Standard Short and Long Arm Set 9-46683 Includes: .050", 1⁄16", 5⁄64", 3⁄32", 7⁄64", 9⁄64" short-arm sizes; 7⁄64", 1⁄8", 9⁄64", 5⁄32", 3⁄16", 7⁄32", 1⁄4", 5⁄16" long-arm sizes, pouch. Screwdrivers 4 Phillips Screwdrivers 9-41293 #0 x 21⁄2" 9-41294 #1 x 3" 9-41295 #2 x 4" 9-41297 #3 x 6" 5 Slotted Screwdrivers 9-41589 1⁄8" x 4" 9-41581 3⁄16" x 4" 9-41584 1⁄4" x 6" 9-41587 5⁄16" x 8" 9-41586 5⁄16" x 13⁄4" Nutdrivers 7 Standard Nutdrivers 9-41977 3⁄16" 9-41974 3⁄8" 9-41971 1⁄4" 9-41975 7⁄16" 9-41972 5⁄16" 9-41976 1⁄2" 9-41973 11⁄32" 5 Pliers 9-45379 8" Slip Joint 9-45385 7" Arc Joint 9-45074 7" Diagonal Cut 9-45607 10" Straight Jaw Locking 9-45104 6" Bent Needle Nose 10 Punches and Chisels 9-42881 1⁄16" Pin Punch 9-42882 3⁄32" Pin Punch 9-42883 1⁄8" Pin Punch 9-42884 5⁄32" Pin Punch 9-42885 3⁄16" Pin Punch 9-42886 1⁄4" Pin Punch 9-42841 3⁄8" Prick Punch 9-42861 1⁄2" Center Punch 9-42991 5⁄8" x 12" Cold Chisel 9-42993 3⁄4" x 12" Cold Chisel Other Tools ▲ 3/8" Drive Tools 1/2" Drive Tools 9-31284 6" Round Bastard File 9-2124 9-44808 QR TD Ratchet Long 9-44809 QR TD Ratchet 9-31264 10" Mill File 9-42892 16" Rolling Wedge Bar 1 2 9-43537 1 ⁄ " Extension Bar 9-44133 3" Extension Bar 1 Basic Industrial 9-44264 3" Extension Bar 9-44131 6" Extension Bar 9-37396 ⁄2" x 12' Locking Tape 9-44261 6" Extension Bar 9-4425 Universal Joint 9-38292 12 oz. Plastic Tip Maintenance 9-4435 Universal Joint 9-44161 18" Speeder Bar Hammer Tool Set - 158 Pc. 9-44271 16" Speeder Bar 9-44151 15" Slide Bar 9-38464 12 oz. Ball Pein Hammer 9-4428 7" Slide Bar 3/4" Drive Sockets 1/2" Drive Sockets 15 Twelve-Point Standard Sockets 3/8" Drive Sockets 15 Six-Point Standard Sockets 9-47773 1" 9-47782 11⁄2" 11 Twelve-Point Standard Sockets 9-44053 3⁄8" 9-44064 7⁄8" 9-47774 11⁄16" 9-47783 15⁄8" 9-44331 3⁄8" 9-44337 3⁄4" 9-44054 7⁄16" 9-44065 15⁄16" 9-47775 11⁄8" 9-47784 111⁄16" 9-44332 7⁄16" 9-44338 13⁄16" 9-44055 1⁄2" 9-44066 1" 9-47776 13⁄16" 9-47785 13⁄4" 9-44333 1⁄2" 9-44339 7⁄8" 9-44056 9⁄16" 9-44067 11⁄16" 9-47777 11⁄4" 9-47786 113⁄16" 9-44334 9⁄16" 9-44352 15⁄16" 9-44057 5⁄8" 9-44068 11⁄8" 9-47778 15⁄16" 9-47787 17⁄8" 9-44335 5⁄8" 9-44353 1" 9-44058 11⁄16" 9-44052 13⁄16" 9-47779 13⁄8" 9-47788 2" 9-44336 11⁄16" 9-44059 3⁄4" 9-44069 11⁄4" 9-47781 17⁄16" 11 Six-Point Standard Deep Sockets 9-44063 13⁄16" 3/4" Drive Tools 9-43333 3⁄8" 9-43337 3⁄4" 11 Six-Point Standard Deep Sockets 9-44804 QR TD Ratchet 9-43331 7⁄16 9-43338 13⁄16" 9-47582 1⁄2" 9-47588 7⁄8" 9-4440 5" Extension Bar 9-43332 1⁄2" 9-43339 7⁄8" 9-47583 9⁄16" 9-47589 15⁄16" 9-4441 8" Extension Bar 9-43334 9⁄16" 9-43328 15⁄16" 9-47584 5⁄8" 9-47591 1" 9-4442 16" Extension Bar 9-43335 5⁄8" 9-43329 1" 9-47585 11⁄16" 9-47592 11⁄16" 9-4443 18" Slide Bar Handle 9-43336 11⁄16" 9-47586 3⁄4" 9-47593 11⁄8" 9-4431 18" Flex T-Handle 2 Spark Plug Sockets 9-47587 13⁄16" Wrenches 9-43324 5⁄8" 9-43325 13⁄16" 2 Spark Plug Sockets 14 Standard Combination Wrenches 9-43327 5⁄8" 9-44241 13⁄16" 9-44693 3⁄8" 9-44702 13⁄16"

18 ■ PROFESSIONAL ■ ADVANCED ■ BASIC ■ SPECIALTY/ACCESSORY CFT Vo-tech '08-09 4/24/08 2:50 PM Page 19

1/4" & 3/8" Drive Mechanic’s and Advanced Aviation Tool Sets

9-200500 ▲ Craftsman 1/4-in and 3/8-in Drive Mechanic’s Tool Set - 100 Pc.

1/4" Drive Sockets 11 Six-Point Standard Sockets 9-43481 5/32" 9-43496 11/32" 9-43491 3/16" 9-43497 3/8" 9-43492 7/32" 9-43498 7/16" 9-43493 1/4" 9-43499 1/2" 9-43494 9/32" 9-43480 9/16" 9-43495 5/16" 10 Six-Point Standard Deep Sockets 9-43571 3/16" 9-43576 11/32" 9-43572 7/32" 9-43577 3/8" 9-43573 1/4" 9-43578 7/16" 9-43574 9/32" 9-43589 1/2" 9-43575 5/16" 9-43587 9/16" 12 Six-Point Metric Sockets 9-43505 4mm 9-43507 9mm 9-43501 5mm 9-43508 10mm 9-43511 5.5mm9-43509 11mm 9-43502 6mm 9-43513 12mm 9-43503 7mm 9-43514 13mm 9-43504 8mm 9-43512 14mm 11 Six-Point Metric Deep Sockets 9-44401 4mm 9-44407 10mm 9-44402 5mm 9-44408 11mm 9-44403 6mm 9-44409 12mm 9-44404 7mm 9-44411 13mm 9-44405 8mm 9-44412 14mm 9-44406 9mm 1/4" Drive Tools 9-44812 FP TD QR Ratchet 9-50658 9/16" 9-50663 7/8" 9-44303 12mm 9-44312 18mm 3/8" Drive Tools 9-43539 3" Extension Bar 11 Six-Point Standard Deep Sockets 9-44304 13mm 9-44308 19mm 9-44813 FP TD QR Ratchet 9-43531 6" Extension Bar 9-43333 3/8" 9-43337 3/4" 9-44305 14mm 9-44314 21mm 9-44264 3" Extension Bar 9-4257 Skt. Adapter 1/4"F x 3/8"M 9-43331 7/16" 9-43338 13/16" 11 Six-Point Metric Deep Sockets 9-44261 6" Extension Bar 9-4280 Universal Joint 9-43332 1/2" 9-43339 7/8" 9-44425 9mm 9-44432 15mm 9-44262 10" Extension Bar 9-43393 6" Plastic Handle Driver 9-43334 9/16" 9-43328 15/16" 9-44426 10mm 9-44433 16mm 9-4256 Socket Adptr. 3/8" Drive Sockets 9-43335 5/8" 9-43329 1" 9-44427 11mm 9-44434 17mm 3/8"F x 1/4"M 10 Twelve-Point Standard Sockets 9-43336 11/16" 9-44428 12mm 9-44435 18mm 9-4435 Universal Joint 9-44329 5/16" 9-50659 5/8" 12 Twelve-Point Metric Sockets 9-44429 13mm 9-44436 19mm 9-50655 3/8" 9-50660 11/16" 9-44301 9mm 9-44306 15mm 9-44431 14mm 9-50656 7/16" 9-50661 3/4" 9-44302 10mm 9-44311 16mm 9-50657 1/2" 9-50662 13/16" 9-44309 11mm 9-44307 17mm

27-895 ▲ Advanced Aviation Armstrong Full Polish 15° & 60° Angle Wrench Add- On Set - 14 Pc.

27-812 3⁄8" 27-826 13⁄16" All Tools Armstrong® Branded 27-814 7⁄16" 27-828 7⁄8" 27-816 1⁄2" 27-830 15⁄16 27-818 9⁄16" 27-832 1 27-820 5⁄8" 27-834 11⁄16" 27-822 11⁄16" 27-836 11⁄8" 27-824 3⁄4" 27-840 11⁄4"

19 CFT Vo-tech '08-09 4/23/08 9:59 PM Page 20

Industrial Maintenance Add-On and Brake & Front End Tool Sets

9-44262 10" Extension Bar 9-43363 1⁄2" x 9⁄16" 9-4118 #2 x 11⁄2" ▲ 9-2122 9-44363 10" Flex T-Handle 9-43364 5⁄8" x 3⁄4" 9-41296 #2 x 8" 1/2" Drive Sockets 9-43365 11⁄16" x 7⁄8" 9-41298 #4 x 8" Industrial 13 Twelve-Point Standard Sockets 2 Adjustable Wrenches 3 Slotted Screwdrivers 9-47501 7⁄16" 9-47512 7⁄8" 9-44602 6" 9-44604 10" 9-4151 1⁄4" x 11⁄2" Maintenance Add- 9-47502 1⁄2" 9-47513 15⁄16" 4 Standard Flare Nut Wrenches 9-41582 3⁄16" x 9" On Tool Set - 56 Pc. 9-47503 9⁄16" 9-47514 1" 9-44174 3⁄8" x 7⁄16" 9-41588 3⁄8" x 12" 9-47505 5⁄8" 9-47515 11⁄16" 9-44171 1⁄2" x 9⁄16" Other Tools 9-47507 11⁄16" 9-47516 11⁄8" 9-44173 5⁄8" x 11⁄16" 9-4513 5" Ignition Pliers 3/8" Drive Sockets 9-47508 3⁄4" 9-47517 11⁄4" 9-44172 3⁄4" x 7⁄8" 9-47705 Hose Clamp Pliers 7 Six-Point Standard Flex Sockets 9-47511 13⁄16" 3 Standard Open End Wrenches 9-38467 32 oz. Ball Pein Hammer 1 5 9-43261 3⁄8" 9-43265 5⁄8" 1/2" Drive Tools 9-44587 1 ⁄4" x 1 ⁄16" 9-31277 8" Half Round Bastard File 3 7 1 9-43262 7⁄16" 9-43266 11⁄16" 9-44816 QR TD Flex Ratchet 9-44588 1 ⁄8" x 1 ⁄16" 9-4458 ⁄2" Drive Stud Extractor 1 5 9-43263 1⁄2" 9-43267 3⁄4" 9-44132 10" Extension Bar 9-44589 1 ⁄2" x 1 ⁄8" 9-43264 9⁄16" 9-44202 18" Flex T-Handle 3 Standard Box End Wrenches 2 Flex Spark Plug Sockets Wrenches 9-43934 11⁄16" x 11⁄4" 1 5 9-43322 5⁄8" 9-43323 13⁄16" 5 Standard Offset Ratcheting Box 9-43935 1 ⁄8" x 1 ⁄16" 3/8" Drive Tools End Wrenches 9-43936 17⁄16" x 11⁄2" 9-44815 QR TD Flex Ratchet 9-43361 1⁄4" x 5⁄16" Screwdrivers 9-43362 3⁄8" x 7⁄16" 3 Phillips Screwdrivers ▲ 9-800117 Brake and Front End Tool Set - 15 Pc.

APPLICATION: For adjustment and replacement of brake and front end components

KDS283 Brake Bleeder Wrench KDS287 Brake Adjusting Tool 9-45493 Drum Brake Spring Tool 9-45494 Brake Spring Pliers 9-4656 Brake Cylinder Hone, 27⁄32" - 2" Cylinders 9-47645 Seal Puller 9-30308 5 Pc. Pickle Fork Set (Three forks and two handles) 58663 3 Pc. Brake Caliper Bit Set (Brake Caliper Sockets: 8mm, 3⁄8", 1⁄4" Hex) 9-47761 Brake Spring Washer Tool

Not All Tools Craftsman® Branded

20 ■ PROFESSIONAL ■ ADVANCED ■ BASIC ■ SPECIALTY/ACCESSORY CFT Vo-tech '08-09 4/23/08 10:00 PM Page 21

Metric Accessory Set

▲ 3/8" Drive Sockets 9-43204 13mm 9-43209 18mm 9-44504 10 x 11mm 9-2150 17 Six-Point Metric Sockets 9-43205 14mm 9-43211 19mm 9-44506 12 x 14mm Metric Accessory 9-43516 6mm 9-43547 15mm 1/2" Drive Sockets 9-44507 13 x 15mm 9-43533 7mm 9-43570 16mm 14 Six-Point Metric Sockets 9-44521 16 x 18mm Set - 105 Pc. 9-43536 8mm 9-43548 17mm 9-44251 9mm 9-44273 16mm 9-44508 17 x 19mm 9-43541 9mm 9-43579 18mm 9-44252 10mm 9-44258 17mm 9-44522 20 x 22mm 9-43542 10mm 9-43549 19mm 9-44253 11mm 9-44228 18mm 9-44523 21 x 23mm 1/4" Drive Sockets 9-43543 11mm 9-43580 20mm 9-44254 12mm 9-44259 19mm 9-44509 22 x 24mm 13 Six-Point Metric Sockets 9-43544 12mm 9-43584 21mm 9-44255 13mm 9-44274 20mm 9-44515 24 x 26mm 9-43505 4mm 9-43508 10mm 9-43545 13mm 9-43585 22mm 9-44256 14mm 9-44278 21mm 9-44516 25 x 27mm 9-43501 5mm 9-43509 11mm 9-43546 14mm 9-44257 15mm 9-44265 22mm 9-44518 28 x 30mm 9-43511 5.5mm 9-43513 12mm 11 Six-Point Metric Deep Sockets Wrenches 9-44519 30 x 32mm 9-43502 6mm 9-43514 13mm 9-44425 9mm 9-44432 15mm 14 Metric Combination Wrenches 9-43503 7mm 9-43512 14mm 9-44426 10mm 9-44433 16mm 9-42863 6mm 9-42870 13mm 9-43504 8mm 9-43515 15mm 9-44427 11mm 9-44434 17mm 9-42864 7mm 9-42871 14mm 9-43507 9mm 9-44428 12mm 9-44435 18mm 9-42865 8mm 9-42872 15mm 12 Six-Point Deep Metric Sockets 9-44429 13mm 9-44436 19mm 9-42866 9mm 9-42873 16mm 9-44401 4mm 9-44407 10mm 9-44431 14mm 9-42867 10mm 9-42874 17mm 9-44402 5mm 9-44408 11mm 10 Six-Point Metric Flex Sockets 9-42868 11mm 9-42875 18mm 9-44403 6mm 9-44409 12mm 9-43201 10mm 9-43206 15mm 9-42869 12mm 9-42876 19mm 9-44404 7mm 9-44411 13mm 9-43202 11mm 9-43207 16mm 14 Metric Open End Wrenches 9-44405 8mm 9-44412 14mm 9-43203 12mm 9-43208 17mm 9-44502 6 x 8mm 9-44406 9mm 9-44410 15mm 9-44503 7 x 9mm

21 CFT Vo-tech '08-09 4/23/08 10:00 PM Page 22

Metric Accessory Kits

9-2155 ▲ Metric Accessory Set - 113 Pc. 3/8" Drive Sockets 15 Twelve-Point Metric Sockets 9-44294 6mm 9-44305 14mm 9-44295 7mm 9-44306 15mm 9-44296 8mm 9-44311 16mm 9-44301 9mm 9-44307 17mm 9-44302 10mm 9-44312 18mm 9-44309 11mm 9-44308 19mm 9-44303 12mm 9-44314 21mm 9-44304 13mm 13 Twelve-Point Metric Deep Sockets 9-44413 9mm 9-44421 16mm 9-44414 10mm 9-44422 17mm 9-44415 11mm 9-44423 18mm 9-44416 12mm 9-44424 19mm 9-44417 13mm 9-44297 21mm 9-44418 14mm 9-44298 22mm 9-44419 15mm 1/2" Drive Sockets 24 Twelve-Point Metric Sockets 9-44231 9mm 9-44249 21mm 9-44232 10mm 9-44239 22mm 9-44229 11mm 9-44240 23mm 9-44233 12mm 9-44242 24mm 9-44234 13mm 9-44269 25mm Wrenches 9-44115 13mm 9-44122 20mm 5 Metric Deep Offset Wrenches 9-44235 14mm 9-44272 26mm 18 Metric Full Polish Combination 9-44116 14mm 9-44124 21mm 9-44360 10 x 11mm 9-44236 15mm 9-44243 27mm Wrenches 9-44117 15mm 9-44130 22mm 9-44361 12 x 14mm 9-44266 16mm 9-44276 28mm 9-45986 7mm 9-45995 16mm 9-44118 17mm 9-44362 13 x 15mm 9-44237 17mm 9-44230 29mm 9-45987 8mm 9-45996 17mm 8 Metric Full Polish Ratcheting 9-44364 16 x 18mm 9-44267 18mm 9-44244 30mm 9-45988 9mm 9-45997 18mm Combination Wrenches 9-44366 17 x 19mm 9-44238 19mm 9-44245 32mm 9-45989 10mm 9-45998 19mm 9-42568 8mm 9-42572 14mm Other Tools 9-44268 20mm 9-44248 36mm 9-45990 11mm 9-45956 22mm 9-42569 10mm 9-42573 15mm 9-1669 5 Sleeve Roll-Up Pouch 15 Twelve-Point Metric Deep Sockets 9-45991 12mm 9-45957 23mm 9-42570 12mm 9-42575 17mm 9-44438 10mm 9-44459 18mm 9-45992 13mm 9-45958 24mm 9-42571 13mm 9-42576 18mm 9-44439 11mm 9-44446 19mm 9-45993 14mm 9-45959 25mm 4 Metric Double Box End Ratcheting 9-44440 12mm 9-44463 20mm 9-45994 15mm 9-45960 30mm Wrenches 9-44441 13mm 9-44447 21mm 11 Metric Full Polish Stubby 9-42594 8 x 10mm 9-44444 14mm 9-44448 22mm Combination Wrenches 9-42595 12 x 13mm 9-44442 15mm 9-44463 24mm 9-44113 10mm 9-44119 18mm 9-42596 15 x 17mm 9-44443 16mm 9-44449 27mm 9-44114 12mm 9-44120 19mm 9-42597 18 x 19mm 9-44445 17mm

9-2160 ▲ Metric Accessory Set - 75 Pc.

3/8" Drive Sockets 7 Metric Hex Bit Sockets 9-42674 4mm 9-42678 8mm 9-42675 5mm 9-42659 9mm 9-42676 6mm 9-42679 10mm 9-42677 7mm 8 Metric Wrench Sockets 9-42070 8mm 9-42074 14mm 9-42071 10mm 9-42075 15mm 9-42072 12mm 9-42076 17mm 9-42073 13mm 9-42077 18mm Wrenches 10 Metric Crowfoot Wrenches 9-43631 10mm 9-43636 15mm 9-43632 11mm 9-43637 16mm 9-43633 12mm 9-43638 17mm 9-43634 13mm 9-43639 18mm 9-43635 14mm 9-43641 19mm 10 Metric Combination Ignition Wrenches 9-42340 4mm 9-42345 7mm 9-44553 7mm 9-44557 11mm Hex Keys 7 Metric Nutdrivers 9-42341 4.5mm 9-42346 8mm 5 Metric Full Polish Flare Nut 20 Metric Short and Long Arm Set 9-41981 5mm 9-41985 9mm 9-42342 5mm 9-42347 9mm Wrenches 9-46677 Includes: 1.5, 2, 2.5, 9-41982 6mm 9-41986 10mm 9-42343 5.5mm 9-42348 10mm 9-42095 9 x 11mm 9-41983 7mm 9-41987 11mm 9-42344 6mm 9-42349 11mm 3, 4, 4.5, 5, 5.5, 6, 7, 9-42096 10 x 12mm 9-41984 8mm 8 Metric Open End Ignition Wrenches 8mm short-arm sizes: 9-42097 13 x 14mm 9-44524 5mm 9-44554 8mm 1.5, 2, 2.5, 3, 4, 4.5, 5, 9-42098 15 x 17mm 9-44551 5.5mm 9-44555 9mm 5.5, 6mm long-arm 9-42099 16 x 18mm 9-44552 6mm 9-44556 10mm sizes; pouch.

22 ■ PROFESSIONAL ■ ADVANCED ■ BASIC ■ SPECIALTY/ACCESSORY CFT Vo-tech '08-09 4/23/08 10:00 PM Page 23

GM ASEP Set

▲ 1/2" Drive Tools 9-2142 9-44815 FP QR TD Ratchet 9-43522 2" Extension Bar GM ASEP Set- 324 9-44122 3" Extension Bar 9-44131 6" Extension Bar Pc. 9-44132 10" Extension Bar 9-44201 15" Flex T-Handle 9-44202 18" Flex T-Handle APPLICATION: 9-44161 18" Speeder Bar This tool set specifically designed Wrenches for use by students enrolled in a 14 Standard Full Polish GM Automotive Service Combination Wrenches 9-45974 5⁄16" 9-45981 3⁄4" Education Program (ASEP) 9-45975 3⁄8" 9-45982 13⁄16" 9-45976 7⁄16" 9-45983 7⁄8" 1/4" Drive Sockets 9-45977 1⁄2" 9-45984 15⁄16" 10 Six-Point Standard Laser Sockets 9-45978 9⁄16" 9-45985 1" 9-45802 3⁄16" 9-34595 11⁄32" 9-45979 5⁄8" 9-45950 11⁄16" 9-34591 7⁄32" 9-34596 3⁄8" 9-45980 11⁄16" 9-45951 11⁄8" 9-34592 1⁄4" 9-34597 7⁄16" 16 Metric Full Polish Combination 9-34593 9⁄32" 9-34598 1⁄2" Wrenches 9-34594 5⁄16" 9-34599 9⁄16" 9-45988 9mm 9-45997 18mm 10 Six-Point Metric Laser Sockets 9-45989 10mm 9-45998 19mm 9-45908 5mm 9-34606 10mm 9-45990 11mm 9-42937 20mm 9-34602 6mm 9-34607 11mm 9-45991 12mm 9-42938 21mm 9-34603 7mm 9-34608 12mm 9-45992 13mm 9-45956 22mm 9-34604 8mm 9-34609 13mm 9-45993 14mm 9-45957 23mm 9-34605 9mm 9-34611 14mm 9-45994 15mm 9-45958 24mm 1/4" Drive Tools 9-45996 17mm 9-45959 25mm 9-44812 FP QR TD Ratchet 1 Standard Full Polish Stubby 9-43538 11⁄2" Extension Bar Combination Wrench 9-43539 3" Extension Bar 9-44110 1" 9-43531 6" Extension Bar 5 Standard Full Polish Flare Nut 9-4336 Flex Extension Wrenches 9-43393 Spinner Handle 9-42090 1⁄4" x 5⁄16" 9-43523 6" Flex Handle 9-42091 3⁄8" x 7⁄16" 9-4281 Speeder Wrench 9-42092 1⁄2" x 9⁄16" 9-4280 Universal Joint 9-42093 5⁄8" x 11⁄16" 3/8" Drive Sockets 9-42094 3⁄4" x 7⁄8" 9 Six-Point Standard Laser Sockets 5 Metric Full Polish Flare Nut 9-45823 3⁄8" 9-45828 11⁄16" Wrenches 9-45824 7⁄16" 9-45829 3⁄4" 9-42095 9 x 11mm 9-45825 1⁄2" 9-45831 13⁄16" 9-42096 10 x 12mm 3 Hammers 9-73577 Professional Coax Up 9-45826 9⁄16" 9-45832 7⁄8" 9-42097 13 x 14mm 9-45787 16 oz. Rubber Mallet Front Cable Stripper, 9-45827 5⁄8" 9-42098 15 x 17mm 9-38466 24 oz. Hickory Handle Crimper, Cutter Tool 9 Six-Point Metric Laser Sockets 9-42099 16 x 18mm Ball Pein 70-535 Pry Bar, 11/16" x 18" 9-45852 10mm 9-45857 15mm 3 Metric 3/8" Drive Crowfoot 69-543 21 oz. Slimline One- 9-94854 Aluminum Utility Knife 9-45853 11mm 9-45858 16mm Wrenches Piece Dead Blow 9-43293 3 pc Gasket Scraper 9-45854 12mm 9-45859 17mm 9-43638 17mm Punches and Chisels Set (3⁄4", 1", 11⁄2") 9-45855 13mm 9-45861 18mm 9-43639 18mm 1 Center Punch KDS2326 Tire Tread and Break 9-45856 14mm 9-43641 19mm 9-42861 3⁄8" Center Punch Lining Gauge 2 Laser Spark Plug Sockets 2 Oil Filter Wrenches 1 Prick Punch 9-90344 Tire Valve Stem 5 13 1 7 9-34671 ⁄8" 9-50726 ⁄16" 28-20522 3 ⁄2" x 3 ⁄8" 9-42841 3⁄8" Prick Punch Replacement Tool 3/8" Drive Tools 28-20521 27⁄8" x 31⁄4" 3 Pin Punches KDS2522 6" Stainless Steel Rule 9-44995 Thin Profile TD Ratchet Hex Keys 9-42881 1⁄16" Pin Punch KDS202 Battery Terminal Puller 1 9-43537 1 ⁄2" Extension Bar 13 Standard Ball End Hex Keys 9-42882 3⁄32" Pin Punch KDS2173 3-Way Battery Tool 9-44264 3" Extension Bar 9-46754 Includes .050, 1⁄16" 5⁄64", 9-42883 1⁄8" Pin Punch KDS3367 Side Terminal Battery 9-44261 6" Extension Bar 3⁄32", 7⁄64", 1⁄8", 9⁄64", 5⁄32", 2 Line-up Tools Wrench 9-44262 10" Extension Bar 3⁄16", 7⁄32", 1⁄4", 5⁄16", 3⁄8" 9-42901 5⁄32" KDS204 Battery Terminal 9-44271 16" Speeder Bar long arm sizes. 9-42902 3⁄16" Spreader & Cleaner 9-44263 10" Flex T-Handle 13 Metric Ball End Hex Keys 2 Cold Chisels KDS203 Battery Nut Pliers 9-4256 Socket Adapter, 9-47755 Includes 1.5, 2, 2.5, 3, 4, 9-42973 1⁄2" Cold Chisel KDS206 Battery Brush 3 1 ⁄8" F - ⁄4" M 4.5, 5, 5.5, 6, 7, 8, 9, 9-42975 3⁄4" Cold Chisel KDS41520 15 Pc. Brake Service Kit 9-4258 Socket Adapter, 10mm long arm sizes. Other Tools KDS2223 Non-Magnetic Feeler 3⁄8" F - 1⁄2" M Screwdrivers 9-16391 11 pc Air Compressor Gauge 9-4435 Universal Joint 5 Professional Slotted Screwdrivers Accessory Kit KDS2327 Spark Plug Gap Gauge 1/2" Drive Sockets 9-47193 1⁄4" x 21⁄4" 9-16365 1/4" Air Hose Swivel KDS162 Feeler Gauge 12 Six-Point Standard Laser Sockets 9-47194 1⁄4" x 4" Connector 3 3 9-15848 ⁄8" 9-15854 ⁄4" 9-47195 1⁄4" x 6" 9-26535 83 pc. Screwdriver Bit 7 13 ® 9-15849 ⁄16" 9-15855 ⁄16" 9-47197 5⁄16" x 6" Set Not All Tools Craftsman Branded 1 7 9-15850 ⁄2" 9-15856 ⁄8" 9-47199 3⁄8" x 8" 9-41796 Readybit Ratcheting 9-15851 9⁄16" 9-15857 7⁄8" 3 Professional Phillips Screwdrivers Screwdriver Set 9-15852 5⁄8" 9-15858 1" 9-47184 #1 x 3" 9-36144 12" Ergonomic 11 1 9-15853 ⁄16" 9-15859 1 ⁄16" 9-47185 #2 x 21⁄4" Hacksaw 12 Six-Point Metric Laser Sockets 9-47186 #2 x 4" KDS2756 HEI Ignition Tester 9-15860 12mm 9-15866 18mm 6 Professional Pliers 9-31300 6" Handled Mill File 9-15861 13mm 9-15867 19mm 9-45760 63⁄4" Slip Joint 9-4070 2-1/4" Round 9-15862 14mm 9-15868 21mm 9-45762 6" Diagonal Inspection Mirror 9-15863 15mm 9-15869 22mm 9-45763 8" Long Nose KDS2646 Low-Voltage Circuit 9-15864 16mm 9-15870 24mm 9-45766 101⁄2" Tongue & Groove Tester 9-15865 17mm 9-15871 27mm 9-45768 8" Bent Wide Nose 9-41602 Magnetic Pick-Up Tool 9-45714 10" Curved Jaw Locking with Powercap™

23 CFT Vo-tech '08-09 4/23/08 10:00 PM Page 24

Ford ASSET Program Set

▲ 9-44253 11mm 9-44258 17mm 9-2149 9-44254 12mm 9-44228 18mm 9-44255 13mm 9-44259 19mm Ford ASSET Program 3 Twelve-Point Metric Sockets 9-44242 24mm 9-44244 30mm Set - 281 Pc. 9-44276 28mm 2 Six-Point Metric Laser Sockets 9-15867 19mm 9-15868 21mm APPLICATION: 1/2" Drive Tools This tool set specifically 9-44809 QR TD Ratchet designed for use by students 9-44133 3" Extension Bar 9-44132 10" Extension Bar enrolled in a Ford Automotive 9-44202 18" Flex T-Handle Student Service Education 9-4259 Socket Adapter, Training (ASSET) program 1⁄2" F - 3⁄8" M Wrenches 1/4" Drive Sockets 13 Standard Full Polish 13 Six-Point Metric Sockets Combination Wrenches 1 11 9-43505 4mm 9-43508 10mm 9-45973 ⁄4" 9-45980 ⁄16" 5 3 9-43501 5mm 9-43509 11mm 9-45974 ⁄16" 9-45981 ⁄4" 3 13 9-43511 5.5mm 9-43513 12mm 9-45975 ⁄8" 9-45982 ⁄16" 7 7 9-43502 6mm 9-43514 13mm 9-45976 ⁄16" 9-45983 ⁄8" 1 15 9-43503 7mm 9-43512 14mm 9-45977 ⁄2" 9-45984 ⁄16" 9 9-43504 8mm 9-43515 15mm 9-45978 ⁄16" 9-45985 1" 5 9-43507 9mm 9-45979 ⁄8" 12 Six-Point Metric Deep Sockets 17 Metric Full Polish Combination 9-44401 4mm 9-44407 10mm Wrenches 9-44402 5mm 9-44408 11mm 9-45986 7mm 9-45995 16mm 9-44403 6mm 9-44409 12mm 9-45987 8mm 9-45996 17mm 9-44404 7mm 9-44411 13mm 9-45988 9mm 9-45997 18mm 9-44405 8mm 9-44412 14mm 9-45989 10mm 9-45998 19mm 9-44406 9mm 9-44410 15mm 9-45990 11mm 9-45955 21mm 3 Torx Bit Sockets 9-45991 12mm 9-45956 22mm 9-42661 T-15 9-42663 T-25 9-45992 13mm 9-45957 23mm 9-42662 T-20 9-45993 14mm 9-45958 24mm 1/4" Drive Tools 9-45994 15mm 9-41295 #2 x 4" Electrician's Tool 9-44807 QR TD Ratchet 12 Standard Full Polish 9-41297 #3 x 4" 34-82141 Digital Manual 9-43539 3" Extension Bar Combination Wrenches 1 9 9-41298 #4 x 8" Ranging Multimeter 9-43531 6" Extension Bar 9-44699 ⁄4" 9-44696 ⁄16" 5 5 6 Torx Screwdrivers 9-94854 Aluminum Utility Knife 9-43393 Spinner Handle 9-44691 ⁄16" 9-44697 ⁄8" 11 11 9-41473 T-10 9-41476 T-25 KDS3680 Serpentine Belt Tool 9-4280 Universal Joint 9-44692 ⁄32" 9-44698 ⁄16" 3 3 9-41474 T-15 9-41479 T-27 KDS3252 Flat Band Hose Clamp 9-4257 Socket Adapter, 9-44693 ⁄8" 9-44701 ⁄4" 7 13 9-41475 T-20 9-41477 T-30 Pliers 1⁄4" F - 3⁄8" M 9-44694 ⁄16" 9-44702 ⁄16" 1 7 4 Pliers 34-93104 2D Flashlight 3/8" Drive Sockets 9-44695 ⁄2" 9-44703 ⁄8" 9-45380 10" Slip Joint 9-40811 36 Blade Master 9 Six-Point Standard Deep Sockets 18 Metric Full Polish Combination 9-45076 7" Wide Jaw Diagonal Thickness Gauge Set 9-43333 3⁄8" 9-43336 11⁄16" Wrenches 9-45103 8" Long Nose KDS3288 3-Jaw Universal Oil 9-43331 7⁄16" 9-43337 3⁄4" 9-42911 7mm 9-42924 16mm ALN25310 10" Rib Lock w/Grip Filter Wrench 9-43332 1⁄2" 9-43338 13⁄16" 9-42912 8mm 9-42929 17mm 2 Professional Pliers 9-45494 Brake Spring Pliers 9-43334 9⁄16" 9-43339 7⁄8" 9-42913 9mm 9-42925 18mm 9-45714 10" Curved Jaw Locking 9-47767 Universal Brake Spring 9-43335 5⁄8" 9-42914 10mm 9-42921 19mm 9-45716 6" Long Nose Locking Retaining Tool 13 Six-Point Metric Sockets 9-42915 11mm 9-42937 20mm 2 Retaining Ring Pliers Kits 9-45496 Brake Adjusting Tool 9-43516 6mm 9-43546 14mm 9-42916 12mm 9-42938 21mm 9-50464 12 pc. Qtr-Turn® 9-37396 1⁄2" x 12' Locking Tape 9-43536 8mm 9-43547 15mm 9-42917 13mm 9-42922 22mm Retaining Ring Pliers Kit Measure 9-43541 9mm 9-43570 16mm 9-42918 14mm 9-42939 23mm 9-47385 2 pc. Qtr-Turn® 9-16387 Blow Gun 9-43542 10mm 9-43548 17mm 9-42919 15mm 9-42923 24mm Convertible Retaining KDS2822 Trim Pad Remover Tool 9-43543 11mm 9-43579 18mm 5 Standard Full Polish Flare Nut Ring Pliers Set KDS206 Battery Brush 9-43544 12mm 9-43549 19mm Wrenches 1 5 4 Hammers 9-4097 1" x 2" Oval Inspection 9-43545 13mm 9-42090 ⁄4" x ⁄16" 3 7 9-38292 12 oz. Plastic Tip Mirror 11 Six-Point Metric Deep Sockets 9-42091 ⁄8" x ⁄16" 1 9 9-38464 12 oz. Hickory Handle 9-46947 301⁄4" Magnetic 9-44425 9mm 9-44432 15mm 9-42092 ⁄2" x ⁄16" 5 11 Ball Pein Telescoping Pick-Up 9-44426 10mm 9-44433 16mm 9-42093 ⁄8" x ⁄16" 3 7 9-38394 2 lb. Dead Blow Tool 9-44427 11mm 9-44434 17mm 9-42094 ⁄4" x ⁄8" 9-45787 16 oz. Rubber Mallet KDS2522 6" Stainless Steel Rule 9-44428 12mm 9-44435 18mm 5 Metric Full Polish Flare Nut Punches and Chisels 9-40816 Six Wire Spark Plug 9-44429 13mm 9-44436 19mm Wrenches 1 Center Punch Gauge for Standard 9-44431 14mm 9-42095 9 x 11mm 9-42861 3⁄8" Ignitions 6 Metric Hex Bit Sockets 9-42096 10 x 12mm 3 Starting Punches 9-40818 Six Wire Hi-Energy 9-42674 4mm 9-42677 7mm 9-42097 13 x 14mm 70-157 1⁄8" Spark Plug Gauge 9-42675 5mm 9-42678 8mm 9-42098 15 x 17mm 70-161 3⁄16" 9-AO15902 Safety Glasses 9-42676 6mm 9-42679 9mm 9-42099 16 x 18mm 70-165 1⁄4" KDS485 Gasket Scraper 4 Torx Bit Sockets 1 Adjustable Wrench 4 Pin Punches KDS2649 Circuit & Spark Plug 9-42665 T-30 9-42666 T-45 9-44605 12" Length 9-42883 1⁄8" Tester 9-42666 T-40 9-42667 T-50 Hex Keys 9-42885 3⁄16" 9-90344 Tire Valve Stem Repair 2 Six-Point Spark Plug Flex Sockets 11 Standard Long Arm Hex Keys 9-42886 1⁄4" Tool 9-43322 5⁄8" 9-43325 13⁄16" 9-46811 3/8" Drive Tools 11 Metric Long Arm Hex Keys 1 Brass Pin Punch 9-31310 8" Handled Mill File EHT33201 3⁄8" 9-43277 Screwdriver Pry Bar, 9-44808 QR TD Ratchet 9-46812 1 Line-Up Tool 25" x 1⁄2" 9-43537 11⁄2" Extension Bar Screwdrivers 9-42902 3⁄16" Tool Storage 9-44264 3" Extension Bar 5 Slotted Screwdrivers 3 Cold Chisels 9-59618 26" Black 6-Drawer 9-44262 10" Extension Bar 9-41581 3⁄16" x 4" 9-42972 3⁄8" Tool Chest 9-4435 Universal Joint 9-4151 1⁄4" x 11⁄2" 9-42973 1⁄4" 9-59619 26" Black 8-Drawer 9-41583 1⁄4" x 4" 9-4258 Socket Adapter, 3 5 9-42975 ⁄4" Roll Away 3⁄8" F - 1⁄2" M 9-41579 ⁄16" x 6" Alignment Tool 9-59169 40" Blue 14-Drawer 1/2" Drive Sockets 9-41852 3⁄8" x 8" 5 Phillips Screwdrivers 9-42892 16" Rolling Wedge Bar Tool Cart 10 Six-Point Metric Sockets Other Tools 9-44251 9mm 9-44256 14mm 9-41294 #1 x 3" ® 1 9-73575 All Purpose Not All Tools Craftsman Branded 9-44252 10mm 9-44257 15mm 9-4118 #2 x 1 ⁄2"

24 ■ PROFESSIONAL ■ ADVANCED ■ BASIC ■ SPECIALTY/ACCESSORY CFT Vo-tech '08-09 4/23/08 10:00 PM Page 25

AYES Tool Starter Set

▲ 3/8" Drive Sockets Wrenches 9-46947 301⁄4" Magnetic 9-2167 9 Six-Point Metric LaserSockets 10 Metric Full Polish Combination Telescoping Pick-Up 9-45852 10mm 9-45857 15mm Wrenches Tool AYES Tool Starter 9-45853 11mm 9-45858 16mm 9-45989 10mm 9-45994 15mm 34-82334 CAT3 Digital Multmeter 9-45854 12mm 9-45859 17mm 9-45990 11mm 9-45995 16mm 9-AO15902 Safety Glasses Set- 109 Pc. 9-45855 13mm 9-45861 18mm 9-45991 12mm 9-45996 17mm KDS2327 Spark Plug Gap Gauge 9-45856 14mm 9-45992 13mm 9-45997 18mm KDS2649 Circuit & Spark Plug 9 Six-Point Metric Deep Laser 9-45993 14mm 9-45998 19mm Tester APPLICATION: Sockets Screwdrivers 9-19864 1⁄2" Drive Impact This tool set specifically 9-45866 10mm 9-45873 16mm 3 Professional Slotted Screwdrivers Wrench designed for use by students 9-45868 12mm 9-45874 17mm 9-47204 3⁄16" x 4" KDS203 Battery Nut Pliers 1 KDS3367 Side Terminal Battery enrolled in a Automotive Youth 9-45869 13mm 9-45875 18mm 9-47194 ⁄4" x 4" 9-45871 14mm 9-45876 19mm 9-47197 5⁄16" x 6" Wrench Education Systems (AYES) 9-45872 15mm 2 Professional Phillips Screwdrivers KDS204 Battery Terminal program 1 Laser Spark Plug Socket 9-47184 #1 x 3" Spreader & Cleaner 9-34671 5⁄8" 9-47186 #2 x 4" KDS206 Battery Brush 1/4" Drive Sockets 3/8" Drive Tools 16 Pc. Readybit® Ratcheting 12 Six-Point Metric Laser Sockets 9-44813 FP QR TD Ratchet Screwdriver Set 9-45907 4mm 9-34605 9mm 9-44264 3" Extension Bar 9-41796 Driver with 14 ® 9-34601 5.5mm 9-34606 10mm 9-44261 6" Extension Bar assorted bits Not All Tools Craftsman Branded 9-45908 5mm 9-34607 11mm 9-4435 Universal Joint 3 Pliers 9-34602 6mm 9-34608 12mm 1/2" Drive Sockets 9-45087 8" Duckbill 9-34603 7mm 9-34609 13mm 1 Six-Point Standard Deep Impact 9-45076 7" Wide Jaw Diagonal 1 9-34604 8mm 9-34611 14mm Laser Socket 9-45381 9 ⁄2" Tongue & Groove 11 Six-Point Metric Deep Laser Sockets 9-16061 3⁄4" 1 Hammer 9-45901 4mm 9-34624 10mm 4 Six-Point Metric Deep Impact 69-531 18 oz. Dead Blow 9-45911 5mm 9-34625 11mm Laser Sockets Other Tools 9-45912 6mm 9-45913 12mm 9-16078 17mm 9-16080 19mm 9-58893 9 pc. Torx/Hex Brake 9-34621 7mm 9-45914 13mm 9-16079 18mm 9-16081 21mm Set 9-34622 8mm 9-45915 14mm 1/2" Drive Tools KDS280 Bendix Drum Brake 9-34623 9mm 9-44814 FP QR TD Ratchet Spring Tool 1/4" Drive Tools KDS2774 Universal Brake Shoe 9-44812 FP QR TD Ratchet Retaining Spring Tool

25 CFT Vo-tech '08-09 4/24/08 2:43 PM Page 26

3/8" Drive Impact Socket and 3/4" Heavy Duty Repair Sets

9 Six-Point Standard Deep IMPACT 46-709 9mm 46-715 15mm 3/8" Drive Tools 44-452 ▲ Sockets 46-710 10mm 46-716 16mm 19-922 IMPACT 3" Extension 19-708 1⁄4" 19-718 9⁄16" 46-711 11mm 46-717 17mm 19-923 IMPACT 6" Extension 3/8" Drive Impact 19-710 5⁄16" 19-720 5⁄8" 46-712 12mm 19-947 IMPACT MAXX Universal 19-712 3⁄8" 19-722 11⁄16" 7 Six-Point Maxx Universal IMPACT Joint Socket Set- 61 Pc. 19-714 7⁄16" 19-724 3⁄4" Sockets 19-952 IMPACT Drive Adaptor 19-716 1⁄2" 19-562 3⁄8" 19-570 5⁄8" 11 Six-Point Metric IMPACT Sockets 19-564 7⁄16" 19-572 11⁄16" All Tools Armstrong® Branded 3/8" Drive Sockets 46-607 7mm 46-613 13mm 19-566 1⁄2" 19-574 3⁄4" 9 Six-Point Standard IMPACT 46-608 8mm 46-614 14mm 19-568 9⁄16" Sockets 46-609 9mm 46-615 15mm 10 Six-Point Metric Maxx Universal 1 9 19-608 ⁄4" 19-618 ⁄16" 46-610 10mm 46-616 16mm IMPACT Sockets 5 5 19-610 ⁄16" 19-620 ⁄8" 46-611 11mm 46-617 17mm 46-110 10mm 46-115 15mm 3 11 19-612 ⁄8" 19-622 ⁄16" 46-612 12mm 46-111 11mm 46-116 16mm 7 3 19-614 ⁄16" 19-624 ⁄4" 11 Six-Point Metric Deep IMPACT 46-112 12mm 46-117 17mm 1 19-616 ⁄2" Sockets 46-113 13mm 46-118 18mm 46-707 7mm 46-713 13mm 46-114 14mm 46-119 19mm 46-708 8mm 46-714 14mm

▲ 3/4" Drive Tools 44-453 13-972 Ratchet 19" 13-918 Breaker Bar 22" 3/4" Heavy Duty 13-922 5" Extension 13-923 8" Extension Repair Set- 54 Pc. 13-925 16" Extension 13-938 T-Handle 13-947 Universal Joint 3/4" Drive Sockets 13-951 Socket Adapter, 11 Twelve-Point Standard Sockets 3⁄4" F x 1⁄2" M 13-128 7⁄8" 13-140 11⁄4" 15 5 13-130 ⁄16" 13-142 1 ⁄16" All Tools Armstrong® Branded 13-132 1" 13-144 13⁄8" 13-134 11⁄16" 13-146 17⁄16" 13-136 11⁄8" 13-148 11⁄2" 13-138 13⁄16" 11 Twelve-Point Standard Deep Sockets 13-328 7⁄8" 13-342 15⁄16" 13-330 15⁄16" 13-344 13⁄8" 13-332 1" 13-346 17⁄16" 13-334 11⁄16" 13-348 11⁄2" 13-336 11⁄8" 13-352 15⁄8" 13-340 11⁄4" 12 Twelve-Point Metric Sockets 40-122 22mm 40-135 35mm 40-123 23mm 40-136 36mm 40-124 24mm 40-138 38mm 40-127 27mm 40-141 41mm 40-130 30mm 40-146 46mm 40-132 32mm 40-150 50mm 12 Twelve-Point Metric Deep Sockets 40-322 22mm 40-335 35mm 40-323 23mm 40-336 36mm 40-324 24mm 40-338 38mm 40-327 27mm 40-341 41mm 40-330 30mm 40-346 46mm 40-332 32mm 40-350 50mm

26 ■ PROFESSIONAL ■ ADVANCED ■ BASIC ■ SPECIALTY/ACCESSORY CFT Vo-tech '08-09 4/23/08 10:00 PM Page 27

Air Tools

▲

▲

▲ 9-19916 9-19981 9-19980 ▲ 9-19983 Pro 3/8-Inch 3/8-Inch 3/8-Inch Butterfly 1/2-Inch Impact Wrench Impact Wrench Impact Wrench Impact Wrench

• One hand operation with forward • Low weight design • Low weight design • Low weight design and reverse push buttons • Black mirror finish • Black mirror finish • Black mirror finish • Strong steel hammer case • Overmold comfort grip • High-torque Jumbo hammer • Overmold comfort grip • Twin hammer mechanism • Combined forward/reverse • New in-line swivel action • Combined forward/reverse • In-handle exhaust directs air power mgmt system • Built-in regulator power mgmt system away from work • Thru-handle exhaust with • Torque Max: 95 ft. lbs. • Thru-handle exhaust with • Torque Max: 230 ft. lb. silencing technology • SCFM Delivery Use At 90 psi: silencing technology forward torque • Torque Working: 145 ft. lbs. 6.0 SCFM • Torque Max: 400 ft. lbs. 260 ft. lb. reverse torque • SCFM Delivery Use At 90 psi: • SCFM Delivery Use At 90 psi: • SCFM Delivery: Average Air 6.0 SCFM 6.5 SCFM Consumption 4 CFM

• Free Speed RPM: 14500

▲ ▲ ▲ 9-19933 ▲ 9-19952 9-19953 9-19976 3/8-Inch 1/4-Inch Straight Cut-Off Dual Action Ratchet Die Grinder Tool Sander

• Composite comfort grip • Low weight design • Low weight design • Large lever throttle for precise • 360-degree exhaust with • Heavy-duty ball-bearing • Heavy-duty ball-bearing speed control silencing technology construction construction • Built-in air regulator • Ergonomic throttle lever design • Ergonomic safety • Ergonomic safety • Balanced nylon head design • Twin pawl mechanism lock off throttle lever lock off throttle lever reduces vibration and fatigue • Built-in air regulator; • Rear exhaust • Rear exhaust • Good for sanding, finishing, swivel air inlet • Precision 3-piece collet • See-through safety shield removal and sharpening • Torque Working: 50 ft. lbs. • 1/2 hp design • 1/2 hp design • Air inlet size: 1/4-in. • SCFM Delivery Use At 90 psi: • HP, Max Developed: .5 hp • HP, Max Developed: .5 hp • Max compressor: 60-90 psi 5.5 SCFM • SCFM Delivery Use At 90 psi: • SCFM at 90 PSI: 6.5 • Speed range: 10000 rpm 6.5 SCFM • Free Speed RPM: 20000 • Free Speed RPM: 20000

27 CFT Vo-tech '08-09 4/23/08 10:00 PM Page 28

Auto Body Tools

▲ 9-47297 9-47289 ▲ 7 Pc. Body Hammer General Purpose and Dolly Set Pick Hammer

The most commonly used hammers, dollies and spoon for general body work. All with fiberglass handles for greater strength and shock absorption. Each alloy steel tool features polished working surfaces designed and balanced to do the job right. Includes cross chisel, shrinking and utility pick hammers, light dinging spoon, and toe, heel and general purpose dolly blocks. Fiberglass handles. Wt 12.2 lbs. ▲ 9-47296 4 Pc. Body Hammer Set Medium size point and reach for Set includes curved cross chisel hammer, general general work. Low crown strawberry purpose pick hammer, utility pick hammer and point for perfect balance. Face, door skin hammer. Wt. 4.5 lbs. 1-9⁄16” round point, 3⁄32” radius. Length of pick end, 3 3⁄4”. All with fiberglass handles for greater strength and Fiberglass handle. Weight .91 lbs. shock absorption. Each alloy steel tool features

polished working surfaces designed and balanced to do the job right. 9-47288 ▲

Curved Cross

▲ ▲ 9-47290 9-47291 9-47298 ▲ Chisel Hammer Shrinking Hammer Door Skin Hammer Utility Pick Hammer

Blunt point, short reach. For low Perfect for finishing work. Cross For work in close quarters. Expertly spots in high-crown panels and peen used for working in sharp machined serrations on the round For high crown work and finishing, other work with small clearance. corners around mouldings and for face. Plain square face, 1-1⁄8” round without poking holes in thin Face, 1-9⁄16” round point, 5⁄32” caulking. Balanced curved chisel for serrated face, 1-1⁄4” diameter. sections. 6-1⁄2” overall length. radius. Length of pointed end, 2” work in tight places. Round face

4” overall. Fiberglass handle. 12” handle. Fiberglass handle. head, 4” overall. Fiberglass handle. 1-9⁄16” diameter. Chisel 3” long.

Weight .78 lbs. Weight .94 lbs. Weight .75 lbs. Fiberglass handle. Weight .85 lbs.

▲ ▲ ▲ 9-47294 9-47295 9-47293 9-47292 ▲ Heel Dolly General Purpose Toe Dolly Light Dinging Dolly Spoon

To ding ridges smooth and level. When held against ridge and Thinness and length provide easy struck with hammer, spreads blow Design makes it possible to reach Provides a comfortable hand hold accessibility to narrow pockets. over large area making a smooth easily into sharp corners and wide for heaviest blows. Large, flat face is frequently used in job and preventing damage to radii. Sizes 3-1⁄4 x 2-1⁄2 shrinking and dinging flat panels. ” ” x metal or finish. Not made for 1-7⁄16”. Weight 2.7 lbs. Sizes 4-3⁄4” x 2-3⁄8” x 1-1⁄8”. prying. Length 10” overall. Weight 3.0 lbs. Face 2” 4-5⁄16”. Weight .50 lbs. 28 CFT Vo-tech '08-09 4/23/08 10:00 PM Page 29

Mechanic’s Hand Tools

9-46520 ▲ 9-46521 ▲ Cross-Force Cross-Force 8 Pc. Set SAE 8 Pc. Set METRIC

With this exciting innovation from Includes sizes: Craftsman, you can actually feel the 8, 10, 12 thru 15, 17, 18 mm. difference! The long, ergonomic Wt. 4.71 lbs. handle on this wrench offers a more • Ergonomic handle allows for comfortable grip and additional greater comfort & torque leverage. The 15-degree offset box • Long beam provides additional offers more knuckle clearance. Fully leverage, access & grip area polished for easy clean up. Includes • 15 degree offset offers knuckle sizes 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, clearance 11/16, 3/4 in. Wt. 4.85 lbs. • Combination configuration for • Combination configuration for open-end access & box-end open-end access & box-end strength strength • 12-point box-end permits easier • 12-point box-end permits easier fastener engagement in tight fastener engagement in tight areas areas • Full polish finish for easy clean-up ▲ 9-47711 3/8" Drive Electronic Torque Wrench

For the professional mechanic, this ultimate torque wrench features strain gauge technology for 2% clockwise and 3% counterclockwise accuracy. Features large LCD display, color coded LEDs indicate when to slow torque application. Easy push-button operation to select units of measurement. Rubberized ergonomic handle. Adjusts from 10 to 100 ft. lbs., 120 to 1,200 in. lbs. and 13.6 to 135.6 Newton-meters. Includes storage case. (Batteries not included.) ▲ 9-47712 1/2" Drive Electronic Torque Wrench

For the professional mechanic, this ultimate torque wrench features strain gauge technology for 2% clockwise and 3% counterclockwise accuracy. Features large LCD display, color coded LEDs indicate when to slow torque application. Easy push-button operation to select units of measurement. Rubberized ergonomic handle. Adjusts from 20 to 200 ft. lbs., 240 to 2,400 in. lbs. and 27.1 to 271.2 Newton-meters. Includes case with battery compartment (batteries not included). Includes storage case. Wt. 5.2 lbs.

29 CFT Vo-tech '08-09 4/23/08 10:00 PM Page 30

Professional Tool Storage

▲ 9-65565 R 9-65563 B 9-59932 MB A. Professional 5-Drawer Tool Chest

• Interchangeable modular drawers • Four aluminum drawer dividers and non-slip drawer liners • Open chest height 43"

Overall Size Cubic Drawers Load Wt. (W x D x H) Inches # W D H Cap. Lbs. Lbs.

36 x 21 x 241⁄2 12,035 2 317⁄8 181⁄2 2 120 210.0 2317⁄8 181⁄2 31⁄8 120 1317⁄8 181⁄2 41⁄8 120

A ▲ 9-65566 R 9-65564 B 9-59933 MB B. Professional 7-Drawer Tool Cart

• Interchangeable modular drawers • Four 6" x 2" heavy-duty casters (two rigid, two swivel) B • 1/2" thick hardboard reversible top worksurface • Six aluminum drawer dividers and non-slip drawer liners • 2,400 lbs. load rating

Overall Size Cubic Drawers Load Wt. (W x D x H) Inches # W D H Cap. Lbs. Lbs.

36 x 21 x 421⁄2 17,153 1 317⁄8 181⁄2 2 120 308.0 2317⁄8 181⁄2 31⁄8 120 3317⁄8 181⁄2 41⁄8 120 1317⁄8 181⁄2 81⁄2 120

30 CFT Vo-tech '08-09 4/24/08 2:43 PM Page 31

Ball Bearing Tool Storage ▲ 9-59714 R A. Ball-Bearing 26" 5-Drawer Tool Chest

• Open chest height 331⁄2"

Overall Size Cubic Gauge Drawers Load Wt. (W x D x H) Inches of Steel # W D H Cap. Lbs. Lbs.

26 x 16 x 193⁄4 6,116 Top/Cover: 20 2 223⁄8 145⁄8 2 70 83.5 Drawer Fronts: 20 3 223⁄8 145⁄8 31⁄8 70 Drawer Shells: 20 Sides:18 Back: 20 A

9-59715 R ▲ B. Ball-Bearing 26" 6-Drawer Roll-Away

• 1,000 lbs. load rating Overall Size Cubic Gauge Drawers Load Wt. (W x D x H) Inches of Steel # W D H Cap. Lbs. Lbs.

261⁄2 x 18 x 35 8,375 Top: 18 1 223⁄8 161⁄2 2 70 125.0 Drawer Fronts: 20 2 223⁄8 161⁄2 31⁄8 70 Drawer Shells: 20 2 223⁄8 161⁄2 41⁄8 70 B Bottom/Sides: 18 1 223⁄8 161⁄2 63⁄8 70 Back: 20 ▲ 9-2112 A. Ball-Bearing 40" 7-Drawer Tool Chest

• Open chest height 291⁄2" • Tote tray included Overall Size Cubic Gauge Drawers Load Wt. (W x D x H) Inches of Steel # W D H Cap. Lbs. Lbs.

401⁄2 x 12 x 191⁄2 6,975 Top/Cover: 20 1 223⁄8 103⁄4 2 50 100.0 Drawer Fronts: 24 1 223⁄8 103⁄4 31⁄8 50 A Drawer Shells: 20 2 223⁄8 103⁄4 41⁄8 50 Sides: 18 2 113⁄4 103⁄4 41⁄8 50 Back: 20 1 113⁄4 103⁄4 51⁄4 50 ▲ 9-2113 B. Ball-Bearing 40" 12-Drawer Tool Cart

• 5" x 2" casters • Reinforcing caster channels • 1,000 lbs. load rating B Overall Size Cubic Gauge Drawers Load Wt. (W x D x H) Inches of Steel # W D H Cap. Lbs. Lbs.

41 x 18 x 403⁄4 16,416 Top: 18 4 223⁄8 161⁄2 31⁄8 50 230.0 Drawer Fronts: 24 1 223⁄8 161⁄2 41⁄8 50 Drawer Shells: 20 2 223⁄8 161⁄2 63⁄8 50 Sides: 18 2 113⁄4 161⁄2 31⁄8 50 Back: 20 1 113⁄4 161⁄2 41⁄8 50 1113⁄4 161⁄2 63⁄8 50 1113⁄4 161⁄2 123⁄4 50

31 CFT Vo-tech '08-09 4/23/08 10:11 PM Page 32

Ball-Bearing GRIPLATCH® Utility Carts

▲ 9-59756 B 4-Drawer Ball-Bearing GRIPLATCH® Utility Cart

• GRIPLATCH® drawer latching system • 5" x 2" casters (2 rigid, 2 swivel) • Internal locking system • Gas struts hold cover open • Ball-bearing drawer slides; Drawer liners included • Built-in tool organization; Bulk storage shelf • Tubular locks; Rubber bumpers • Cover stiffener with Craftsman® emboss

Overall Size Cubic Drawers Load Wt. (W x D x H) Inches # W D H Cap. Lbs. Lbs.

363⁄4 x 213⁄8 x 44 ? 2 121⁄4 171⁄2 31⁄4 1,000.0 163.0 1255⁄8 171⁄2 31⁄4 1255⁄8 171⁄2 51⁄4

▲ 9-59740 B 3-Drawer Ball-Bearing GRIPLATCH® Utility Cart

• GRIPLATCH® drawer latching system • 5" x 2" casters (2 rigid, 2 swivel) • Internal locking system • Gas struts hold cover open • Ball-bearing drawer slides; Drawer liners included • Built-in tool organization; Bulk storage shelf • Tubular locks; Rubber bumpers • Cover stiffener with Craftsman® emboss

Overall Size Cubic Drawers Load Wt. (W x D x H) Inches # W D H Cap. Lbs. Lbs.

34 x 205⁄8 x 363⁄4 ?2121⁄4 171⁄2 31⁄4 750.0 99.0 1255⁄8 171⁄2 31⁄4

▲ 9-59758 3-Drawer Ball-Bearing GRIPLATCH® Utility Cart - Stainless Steel*

• GRIPLATCH® drawer latching system • 5" x 2" casters (2 rigid, 2 swivel) • Internal locking system • Gas struts hold cover open • Ball-bearing drawer slides; Drawer liners included • Built-in tool organization; Bulk storage shelf • Tubular locks; Rubber bumpers • Cover stiffener with Craftsman® emboss

Overall Size Cubic Drawers Load Wt. (W x D x H) Inches # W D H Cap. Lbs. Lbs.

34 x 205⁄8 x 363⁄4 ?2121⁄4 171⁄2 31⁄4 750.0 99.0 1255⁄8 171⁄2 31⁄4

*Drawer interiors are painted

32 CFT Vo-tech '08-09 4/23/08 10:11 PM Page 33

Long Distance Tool Carts and Tool Boxes ▲ 9-2118 12-Drawer “Long Distance” Tool Cart

• GRIPLATCH® drawer detent system • Full width top drawer • Internal locking system • Reinforcing caster channels • Heavy-duty tubular side handle • Load rating 1,000 lbs.

Overall Size Cubic Gauge Drawers Load Wt. (W x D x H) Inches of Steel # W D H Cap. Lbs. Lbs.

41 x 20 x 411⁄4 16,150 Drawers: 20 1 363⁄4 161⁄2 41⁄8 70 280.0 Top: 18 1 223⁄8 161⁄2 270 Bottom: 18 3 223⁄8 161⁄2 31⁄8 70 Sides: 18 2 223⁄8 161⁄2 63⁄8 70 Back: 18 1 113⁄4 161⁄2 270 Caster Channel: 14 3 113⁄4 161⁄2 31⁄8 70 Roll Cage: 18 1 113⁄4 161⁄2 131⁄8 70

Craftsman® “Long Distance” Tool Carts. Tested to go over 300 Designed for applications where miles in day-to-day factory use. Feature Roll-Cage construction, flat sides and back, triple wall bottom construction, double wall the cart must constantly be top construction, and GRIPLATCH® drawer detent system. Welded nut caster attachment. 20" front to back for a 40" x 20" moved from job to job. work surface. Ball bearing drawer slides, 5" x 2" casters, 1⁄2" hardboard worksurface and tubular steel side handle. ▲ 9-59241 B 24" Extra Heavy Duty Steel Tool Box

• Open chest height 17" • Two steel side handles • Three drawbolt latches; one with padlock eye and two keys

Overall Size Cubic Tray Wt. (W x D x H) Inches Type Finish Lbs.

241⁄4 x 91⁄2 x 91⁄2 2,169 Steel Black 20.5

Gauge of Steel: Cover Shell Ends 20 20 18 ▲ 9-59212 B 20" Extra Deep Steel Tool Box

• Open chest height 15" • Two drawbolt latches • Tote tray

Overall Size Cubic Tray Locking Wt. (W x D x H) Inches Type Finish System Lbs.

20 x 81⁄2 x 91⁄2 1,600 Steel Black Center Hasp 11.5

Gauge of Steel: Cover Shell Ends 22 24 22

33 CFT Vo-tech '08-09 4/23/08 10:12 PM Page 34

Torque Wrenches

Armstrong Torque Wrenches offer precise torque application in an easy-to-use durable design

INNOVATION Buzzer and Red, Yellow, Green lights to alert user when target DESIGN torque is reached Knurled Aluminum Grip to resist slipping

PRODUCTIVITY Four Simple Buttons: - Power (ON/OFF) - Unit (Convert Units) - Torque Target UP STRENGTH - Torque Target DOWN Thin profile sealed tear drop ratchet head for better access, increased strength and improved dirt infiltration PRODUCTIVITY LCD Screen with Backlight for easy reading of torque values enclosed in a ACCURACY shock resistant housing +/- 2% CW, +/- 3% CCW from 20% to 100% of rated capacity Convert Units (ft.lb., in.lb., N.m.) ASME B107.28 - 2005

DESIGN Operates on 4 AAA Alkaline batteries for up to 40 hours of continuous operation 3/8" Drive Electronic Torque Wrench Product PRIMARY SCALE Head Head Head Thickness Length, Weight Ratchet Number Range Incr. Width Length less tang with tang Inches lbs. Rep. Kit 10-100 ft.lb. 1 ft.lb. 64-534 120-1200 in.lb. 1 in.lb. 1.24 2.3 0.48 0.96 17.75 3.20 11-982 13.6-135.6 N.m. 1 N.m. ASME B107.28 1/2" Drive Electronic Torque Wrench Product PRIMARY SCALE Head Head Head Thickness Length, Weight Ratchet Number Range Incr. Width Length less tang with tang Inches lbs. Rep. Kit 25-250 ft.lb. 1 ft.lb. 64-544 300-3000 in.lb. 1 in.lb. 1.81 2.93 0.65 1.31 26.50 4.80 12-982 33.9-339 N.m. 1 N.m. ASME B107.28

Armstrong Micrometer "Click" style torque wrenches are forged, heat treated, and assembled in the USA using high alloy, domestically produced steel. Manufactured to rigid specifications ensures torque wrenches are of unequaled strength, durability, and accuracy.

3/8" Drive Micrometer Adjustable Torque Wrenches, Ratchet Head Product Certified PRIMARY SCALE ALTERNATE SCALE Head Head Head Thickness Length, Weight Ratchet Blow Mold Number Model No. Range Incr. Range Incr. Width Length less tang with tang Inches lbs. Rep. Kit Case 64-041 64-941 50-250 In/lbs 1 In/lbs 6-29 Nm 0.11 Nm 1.063 1.672 0.469 0.969 9.5 0.76 64-077 64-293 64-046 64-946 10-100 ft/lbs .5 ft/lbs 17-139 Nm 0.7 Nm 1.5 2.125 0.563 1.063 17.1 2.05 64-078 64-295 ASME B107.14M ISO 6789

1/2" Drive Micrometer Adjustable Torque Wrenches, Ratchet Head Product Certified PRIMARY SCALE ALTERNATE SCALE Head Head Head Thickness Length, Weight Ratchet Blow Mold Number Model No. Range Incr. Range Incr. Width Length less tang with tang Inches lbs. Rep. Kit Case 64-085 64-985 10-150 ft/lb 1 ft/lb 20-210 Nm 1.4 Nm 1.750 3.125 0.766 1.438 20.5 2.45 64-092 64-297 64-086 64-986 25-250 ft/lb 1 ft/lb 43-348 Nm 1.4 Nm 1.750 3.125 0.766 1.438 24.0 2.45 64-092 64-298 ASME B107.14M ISO 6789

34 CFT Vo-tech '08-09 4/23/08 10:12 PM Page 35

Puller Sets and Wire Twisters

Set 72-442 Cone Puller Set Components can be assembled to create several versatile puller versions for both internal and external pulling tasks. The puller head is turned to securely lock the jaws onto the part being removed. Both a 2-way and 3-way puller head are included, plus three long-reach and three short-reach puller jaws. Plastic storage box included. Easily removes gears, bearings, timing gears, harmonic balancers, and other press-fitted parts. Weight, 5.09 lbs. Includes: 24544A 3-way cross-head 24545A Adjusting cone 27241A 2-way cross-block 34698A Pulling jaws (3) for internal or external pulling jobs 44148A Internal/external pulling jaws (3), 61/2" 309321A Forcing screw

Set 72-497 10-Ton Slide Hammer Puller Set Ten-way slide hammer puller set. Weight, 20.65 lbs. Includes: 72-490 Slide hammer w/5 lb. hammer with 2 and 3 way puller head 2300-71 Rear axle pulling attachment 24544A 3-way cross-head 24545A Adjusting cone 27241A 2-way cross-block 72-452 Puller hook attachment 34698A Pulling jaws (3) for internal or external pulling jobs 72-454 Grip wrench adapter w/single lead (wrench not included) 205399A Dent puller attachment 44148A Internal/external pulling jaws (3), 61/2" 32054A Internal puller jaws (3), 23/8" 2300-75 Front hub puller assembly 309321A Forcing screw 215895A Sleeve

Wiretwister Pliers are essential tools for safety-wiring fasteners in engines, gearboxes or any assembly where fasteners cannot be permitted to “back out”, and/or when it is critical that precise torque is maintained. Cutting edges are specially heat treated to ease cutting of stainless steel wire and diamond-pattern serrations on jaws grip wire securely. Wiretwister, Manual, Diagonal Nose, RH Twist Product For Wire Size, Length, Total Length, Weight, Number Inches Inches Inches lbs. 68-163 .020" to .041" 6 8.375 0.59 ASME B107.18m Fed’l Spec. GGG-W-340b Wiretwister, Manual, Diagonal Nose, RH Twist Product For Wire Size, Length, Total Length, Weight, Number Inches Inches Inches lbs. 68-171 .020" to .060" 9 10.5 0.85 ASME B107.18m Fed’l Spec. GGG-W-340b Wiretwister, Automatic, Diagonal Nose, RH Twist Product For Wire Size, Length, Total Length, Weight, Number Inches Inches Inches lbs. 68-175 .020" to .060" 9 10.5 0.85 ASME B107.18m Fed’l Spec. GGG-W-340b Wiretwister, Deep Reach Product For Wire Size, Length, Weight, Number Inches Inches lbs. 68-191 .020" to .041" 19.000 0.43

35 CFT Vo-tech '08-09 4/23/08 10:12 PM Page 36

Ignition Wrench Set, Dead Blow Hammers and C-Clamps

Set 27-942 9 Pc. Full Polish 15° and 80° Ignition Wrench Set Approximate Weight, 0.64 Ibs.

Product Opening, Product Opening, Number Inches Number Inches 27-903 13/64 27-909 9/32 27-907 7/32 27-910 5/16 27-904 15/64 27-911 11/32 27-908 1/4 27-912 3/8 Product Number Description 67-830 Pliers-5" Ignition

Vinyl Roll 29-444

Deep Throat One-Piece Dead Blow Hammer

SAFETY RED HOT CAST URETHANE WITH STEEL REINFORCED HANDLE • SAFETY: Safety Warning is prominently visible • Will not spark or mar surfaces SHOT FILLED CANISTER • Resists chipping and splitting • Provides dead blow action and absorbs shock, • Reduces noise when striking metal objects reducing the chance of injury

Product Weight Overall Length, Face Dia., Head Length, Number Class Inches Inches Inches 69-547 32 oz. 12.875 1.750 8.500 Fed’l Spec. GGG-H-33a

Deep Throat Pattern C-Clamp, Zinc Plated

Design and materials are exactly the same as Deep Throat Pattern. However, forcing screw is zinc plated

to resist the adhesion of welding spatter. Product Capacity Inches Depth of Throat from ACME Thread Length Min. Proof Weight, Number Max. Min. Center of Screw, In. Size of Screw Test, lbs. lbs. 78-431 1-1/2 0 1-3/8 3/8-16 3-1/4 1,400 .37 Fed’l Spec. GGG-C-406d

*See your industrial distributor for the full line of Armstrong Industrial Hand Tools.

36 CFT Vo-tech '08-09 4/23/08 10:12 PM Page 37

Ratcheting Wrenches

XL Combination 20 percent Longer and 25 percent Stronger

85198 - 8 Pc. XL Combination Ratcheting Wrench Set SAE

Item No. Description Item No. Description 85110 5/16" 85118 9/16" 85112 3/8" 85120 5/8" 85114 7/16" 85122 11/16" 85116 1/2" 85124 3/4"

85098 - 12 Pc. XL Combination Ratcheting Wrench Set METRIC

Item No. Description Item No. Description 85008 8 mm 85014 14 mm 85009 9 mm 85015 15 mm 85010 10 mm 85016 16 mm 85011 11 mm 85017 17 mm 85012 12 mm 85018 18 mm 85013 13 mm 85019 19 mm

“Original” Ratcheting Wrench

9304 - 4 Pc. Combination Ratcheting Wrench Set SAE

Item No. Description Item No. Description 9012 3/8" 9016 1/2" 9014 7/16" 9018 9/16"

9404 - 4 Pc. Combination Ratcheting Wrench Set METRIC

Item No. Description Item No. Description 9110 10 mm 9113 13 mm 9112 12 mm 9114 14 mm

37 CFT Vo-tech '08-09 4/23/08 10:12 PM Page 38

Ratcheting and Flex Flare Nut Wrenches

Double Box Ratcheting Wrenches

9260 - 6 Pc. Double Box Ratcheting Wrench Set METRIC

Item No. Description Item No. Description 9210 8 x 9 mm 9213 14 x 15 mm 9211 10 x 11 mm 9214 16 x 18 mm 9212 12 x 13 mm 9215 17 x 19 mm

9240 - 4 Pc. Double Box Ratcheting Wrench Set SAE

Item No. Description Item No. Description 9201 5/16" x 3/8" 9203 9/16" x 5/8" 9202 7/16" x 1/2" 9204 11/16" x 3/4"

81911 - 6 Pc. Flex Flare Nut Wrench Set METRIC

Item No. Description Item No. Description 81686 9 x 11 mm 81689 15 x 17 mm 81687 10 x 12 mm 81690 16 x 18 mm 81688 13 x 14 mm 81692 19 x 21 mm

81910 - 5 Pc. Flex Flare Nut Wrench Set SAE

Item No. Description Item No. Description 81693 1/4" x 5/16" 81696 5/8" x 11/16" 81694 3/8" x 7/16" 81697 3/4" x 7/8" 81695 1/2" x 9/16"

38 CFT Vo-tech '08-09 4/23/08 10:12 PM Page 39

Crowfoot and Adjustable Wrenches

81908 - 11 Pc. 3/8" Drive Crowfoot Wrench Set SAE

Item No. Description Item No. Description 81603 3/8" 81609 3/4" 81604 7/16" 81610 13/16" 81605 1/2" 81611 7/8" 81606 9/16" 81612 15/16" 81607 5/8 81613 1" 81608 11/16"

81909 - 10 Pc. 3/8" Drive Crowfoot Wrench Set METRIC

Item No. Description Item No. Description 81614 10 mm 81619 15 mm 81615 11 mm 81620 16 mm 81616 12 mm 81621 17 mm 81617 13 mm 81622 18 mm 81618 14 mm 81623 19 mm

81990 - 3 Pc. Adjustable Wrench Set

Item No. Description 81890 6" Adjustable Cushion Grip Wrench 81891 8" Adjustable Cushion Grip Wrench 81892 10" Adjustable Cushion Grip Wrench

39 CFT Vo-tech '08-09 4/23/08 10:12 PM Page 40

Screwdrivers

80060 - 10 Pc. Combination and Pozidriv ® Screwdriver Set

Item No. Description 80043 #0 x 2-1/2" Pozidriv® 80044 #1 x 3" Pozidriv® 80045 #2 x 4" Pozidriv® with Hex Bolster 80046 #3 x 6" Pozidriv® with Hex Bolster 80015 1/8" x 3" Slotted with Cabinet Tip 80017 3/16" x 4" Slotted with Cabinet Tip 80013 1/4" x 4" Slotted with Hex Bolster 80023 5/16" x 6" Slotted with Hex Bolster 80001 #1 x 3" Phillips 80007 #2 x 4" Phillips with Hex Bolster

80062 - 10 Pc. Insulated Pliers and Screwdriver Set

Item No. Description 80047 3/32" (2.5 mm) x 3" Slotted - Insulated 80048 5/32" (4.0 mm) x 4" Slotted - Insulated 80049 7/32" (5.5 mm) x 5" Slotted - Insulated 80081 #1 x 3-1/8" Phillips - Insulated 80082 #2 x 4" Phillips - Insulated 80084 #1 x 3-1/8" Pozidriv® - Insulated 80085 #2 x 4" Pozidriv® - Insulated 82029 8" Insulated Linemen Pliers 82030 8" Insulated Long Nose Plier 82031 7" Insulated Diagonal Cutting Pliers

80063 - 7 Pc. Insulated Screwdriver Set

Item No. Description 80047 3/32" (2.5 mm) x 3" Slotted - Insulated 80048 5/32" (4.0 mm) x 4" Slotted - Insulated 80049 7/32" (5.5 mm) x 5" Slotted - Insulated 80080 1/4" (6.5 mm) x 6" Slotted - Insulated 80081 #1 x 3-1/8" Phillips - Insulated 80082 #2 x 4" Phillips - Insulated 80083 #0 x 2 - 1/2" Phillips - Insulated

80059 - 4 Pc. Long Screwdriver Set

Item No. Description 80021 3/8" x 16" Slotted 80019 3/16" x 10" Slotted with Cabinet Tip 80020 3/8" x 12" Slotted with Rounded Keystone Tip 80006 #2 x 16" Phillips

40 CFT Vo-tech '08-09 4/23/08 10:12 PM Page 41

Nut Drivers, Pliers and Socket Sets

8916 - 16 Pc. Ratcheting Nut Driver Set SAE/METRIC

Item No. Description Item No. Description 890060GD 3/16" 891050GD 5 m 890080GD 1/4" 891060GD 6 mm 890100GD 5/16" 891070GD 7 mm 890110GD 11/32" 891080GD 8 mm 890120GD 3/8" 891090GD 9 mm 890140GD 7/16 891100GD 10 mm 890160GD 1/2 891110GD 11 mm 891120GD 12 mm 890005GD GearDriver™ Stubby Handle (Red)

82106 - 2 Pc. Double-X ™ Pliers Set

Item No. Description 82005 13” Straight 82006 12.75” 45 Degree

80300 - 51 Pc. SAE/METRIC 6 Pt. Socket Set 1/4" DRIVE

10 Six Pt. Std. SAE Sockets Item No. Description Item No. Description 80105 3/16" 80110 11/32" 80106 7/32" 80111 3/8" 80107 1/4" 80112 7/16" 80108 9/32" 80113 1/2" 80109 5/16" 80114 9/16"

10 Six Pt. Deep SAE Sockets Item No. Description Item No. Description 80115 3/16" 80120 11/32" 80116 7/32" 80121 3/8" 80117 1/4" 80122 7/16" 80118 9/32" 80123 1/2" 80119 5/16" 80124 9/16"

13 Six Pt. Std. Metric Sockets Item No. Description Item No. Description 80125 4 mm 80132 10 mm 80126 5 mm 80133 11 mm 80127 5.5 mm 80134 12 mm 80128 6 mm 80135 13 mm 80129 7 mm 80136 14 mm 80130 8 mm 80137 15 mm 80131 9 mm

13 Six Pt. Deep Metric Sockets Item No. Description Item No. Description 80138 4 mm 80145 10 mm 80139 5 mm 80146 11 m 80140 5.5 mm 80147 12 mm 80141 6 mm 80148 13 mm 80142 7 mm 80149 14 mm 80143 8 mm 80150 15 mm 80144 9 mm

81101 2" Extension 81116 6" Extension 80100 Universal Joint 81008 Thumbwheel Ratchet 81011 Full Polish Teardrop Ratchet

41 CFT Vo-tech '08-09 4/23/08 10:12 PM Page 42

Socket Sets

80550 - 57 Pc. SAE/METRIC 6 Pt. Socket Set 3/8" DRIVE

14 Six Pt. Std. Metric Sockets Item No. Description Item No. Description 80374 6 mm 80381 13 mm 80375 7 mm 80382 14 mm 80376 8 mm 80383 15 mm 80377 9 mm 80384 16 mm 80378 10 mm 80385 17 mm 80379 11 mm. 80386 18 mm 80380 12 mm 80387 19 mm

14 Six Pt. Deep Metric Sockets Item No. Description Item No. Description 13 Six Pt. Std. SAE Sockets 80388 6 mm 80395 13 mm 80389 7 mm 80396 14 mm Item No. Description Item No. Description 80390 8 mm 80397 15 mm 80350 1/4" 80357 11/16" 80391 9 mm 80398 16 mm 80351 5/16" 80358 3/4" 80392 10 mm 80399 17 mm 80352 3/8" 80359 13/16" 80393 11 mm 80400 18 mm 80353 7/16" 80360 7/8" 80394 12 mm 80401 19 mm 80354 1/2" 80361 15/16" 80355 9/16" 80362 1" 81241 3" Extension 80356 5/8" 81242 6" Extension 80549 Universal Joint 11 Six Pt. Deep SAE Sockets 81209 Stubby Full Polish Teardrop Ratchet Item No. Description Item No. Description 81211 Full Polish Teardrop Ratchet 80363 1/4" 80369 5/8" 80364 5/16" 80370 11/16" 80365 3/8" 80371 3/4" 80366 7/16 80372 13/16" 80367 1/2" 80373 7/8" 80368 9/16"

80700 - 49 Pc. SAE/METRIC 6 Pt. Socket Set 1/2" DRIVE

15 Six Pt. Std. Metric Sockets Item No. Description Item No. Description 80622 10 mm 80630 18 mm 80623 11 mm 80631 19 mm 80624 12 mm 80632 20 mm 80625 13 mm 80633 21 mm 80626 14 mm 80634 22 mm 80627 15 mm 80635 23 mm 80628 16 mm 80636 24 mm 80629 17 mm

10 Six Pt. Deep Metric Sockets Item No. Description Item No. Description 12 Six Pt. Std. SAE Sockets 80637 10 mm 80642 15 mm Item No. Description Item No. Description 80638 11 mm 80643 16 mm 80602 7/16" 80608 13/16" 80639 12 mm 80644 17 mm 80603 1/2" 80609 7/8" 80640 13 mm 80645 18 mm 80604 9/16" 80610 15/16" 80641 14 mm 80646 19 mm 80605 5/8" 80611 1" 80606 11/16" 80612 1-1/16" 80600 Universal Joint 80607 3/4" 80613 1-1/8" 81340 3" Extension 81341 5" Extension 8 Six Pt. Deep SAE Sockets 81304 Full Polish Teardrop Ratchet Item No. Description Item No. Description 80614 1/2" 80618 3/4" 80615 9/16" 80619 13/16" 80616 5/8" 80620 7/8" 80617 11/16" 80621 15/16"

42 CFT Vo-tech '08-09 4/23/08 10:12 PM Page 43

Pass-Thru® Ratchet and Soccket Systems

891427 - 27 Pc. SAE/METRIC XL Pass-Thru ® Ratchet Set Featuring Locking Flex GearRatchet ™ Handle 1/4” DRIVE

10 Std. Vortex Sockets Item No. Description Item No. Description 122050 5/32" 122100 5/16" 122060 3/16" 122120 3/8" 122070 7/32" 122140 7/16" 122080 1/4" 122160 1/2" 122090 9/32" 122180 9/16"

13 Metric Vortex Sockets Item No. Description Item No. Description 522350 3.5 mm 522080 8 mm 221060 3" Vortex Extension 522040 4 mm 522090 9 mm 221080 6" Vortex Extension 522450 4.5 mm 522100 10 mm 231061 1/4" Sq. Dr. Quick-Release Adapter 522050 5 mm 522110 11 mm 891400 Locking Flex GearRatchet™ Handle 522550 5.5 mm 522120 12 mm 522060 6 mm 522130 13 mm 522070 7 mm

891226 - 25 Pc. SAE/METRIC XL Pass-Thru ® Ratchet Set Featuring Locking Flex GearRatchet ™ Handle 1/2” DRIVE

10 Std. Vortex Sockets Item No. Description Item No. Description 142200 5/8" 142300 15/16" 142220 11/16" 142320 1" 142240 3/4" 142340 1-1/16" 142260 13/16" 142360 1-1/8" 142280 7/8" 142380 1-1/4"

12 Metric Vortex Sockets Item No. Description Item No. Description 542150 15 mm 542210 21 mm 241080 6" Vortex Extension 542160 16 mm 542220 22 mm 241062 1/2" Sq. Dr. Quick-Release Adapter 542170 17 mm 542240 24 mm 891200 Locking Flex GearRatchet™ Handle 542180 18 mm 542270 27 mm 542190 19 mm 542300 30 mm 542200 20 mm 542320 32 mm

893823 - 23 Pc. SAE/METRIC XL Pass-Thru ® Ratchet Set Featuring Locking Flex GearRatchet ™ Handle 3/8” DRIVE

9 Std. Vortex Sockets Item No. Description Item No. Description 132120 3/8" 132220 11/16" 132140 7/16" 132240 3/4" 132160 1/2" 132260 13/16" 132180 9/16" 132280 7/8" 132200 5/8"

10 Metric Vortex Sockets Item No. Description Item No. Description 532100 10 mm 532150 15 mm 231060 3" Vortex Extension 532110 11 mm 532160 16 mm 231080 6" Vortex Extension 532120 12 mm 532170 17 mm 231062 3/8" Sq. Dr. Quick-Release Adapter 532130 13 mm 532180 18 mm 893800 Locking Flex GearRatchet™ Handle 532140 14 mm 532190 19 mm

43 CFT Vo-tech '08-09 4/23/08 10:12 PM Page 44

Bit Socket Sets

80726 - 36 Pc. Master TORX ® Set with HEX Bit Sockets 1/4”, 3/8”, 1/2” DRIVE

Item No. Description 80451 T-40 2 Pc. Internal Torx Socket 3/8" 80452 T-45 2 Pc. Internal Torx Socket 3/8" 80453 T-47 2 Pc. Internal Torx Socket 3/8" 80454 T-50 2 Pc. Internal Torx Socket 3/8" 80455 T-55 2 Pc. Internal Torx Socket 3/8" 80416 5/32" Hex Bit Socket 3/8" 80417 3/16" Hex Bit Socket 3/8" PATENTED 80418 7/32" Hex Bit Socket 3/8" 80419 1/4" Hex Bit Socket 3/8" 80420 5/16" Hex Bit Socket 3/8" 80421 3/8" Hex Bit Socket 3/8" 80422 2 mm Hex Bit Socket 3/8" 80423 2.5 mm Hex Bit Socket 3/8" 80424 3 mm Hex Bit Socket 3/8" 80425 4 mm Hex Bit Socket 3/8" Item No. Description 80426 5 mm Hex Bit Socket 3/8" 80172 T-10 2 Pc. Internal Torx Socket 1/4" 80427 6 mm Hex Bit Socket 3/8" 80173 T-15 2 Pc. Internal Torx Socket 1/4" 80428 7 mm Hex Bit Socket 3/8" 80174 T-20 2 Pc. Internal Torx Socket 1/4" 80429 8 mm Hex Bit Socket 3/8" 80175 T-25 2 Pc. Internal Torx Socket 1/4" 80430 9 mm Hex Bit Socket 3/8" 80176 T-27 2 Pc. Internal Torx Socket 1/4" 80431 10 mm Hex Bit Socket 3/8" 80177 T-30 2 Pc. Internal Torx Socket 1/4" 80460 E-10 External Torx Socket 3/8" 80187 E-5 External Torx Socket 1/4" 80461 E-12 External Torx Socket 3/8" 80188 E-6 External Torx Socket 1/4" 80462 E-14 External Torx Socket 3/8" 80189 E-7 External Torx Socket 1/4" 80463 E-16 External Torx Socket 3/8" 80190 E-8 External Torx Socket 1/4" 80669 E-18 External Torx Socket 1/2"

80724 - 11 Pc. TORX ® Tamper-Proof Bit Socket Set

Item No. Description Drive Size 80471 T-10 Tamper-Proof Internal Torx Bit 1/4" 80472 T-15 Tamper-Proof Internal Torx Bit 1/4" 80473 T-20 Tamper-Proof Internal Torx Bit 1/4" 80474 T-25 Tamper-Proof Internal Torx Bit 1/4" 80475 T-27 Tamper-Proof Internal Torx Bit 1/4" PATENTED 80476 T-30 Tamper-Proof Internal Torx Bit 1/4" 80477 T-40 Tamper-Proof Internal Torx Bit 3/8" 80478 T-45 Tamper-Proof Internal Torx Bit 3/8" 80479 T-50 Tamper-Proof Internal Torx Bit 3/8" 80480 1/4" Bit Adapter Socket 3/8" 80481 5/16" Bit Adapter Socket 3/8"

80573 - 8 Pc. LONG BALL HEX Bit Socket Set METRIC 3/8” DRIVE

Item No. Description Item No. Description 80441 3 mm 80445 7 mm 80442 4 mm 80446 8 mm 80443 5 mm 80447 9 mm 80444 6 mm 80448 10 mm

PATENTED

44 CFT Vo-tech '08-09 4/23/08 10:12 PM Page 45

Bit Socket Sets and Socket Rails

80574 - 7 Pc. LONG BALL HEX Bit Socket Set SAE 3/8” DRIVE

Item No. Description Item No. Description 80434 1/8" 80438 1/4" 80435 5/32" 80439 5/16" 80436 3/16" 80440 3/8" 80437 7/32"

PATENTED

80577 - 7 Pc. SCREWDRIVER Bit Socket Set

Item No. Description Drive Size 80464 4 mm Slotted Bit Socket 3/8" 80465 5 mm Slotted Bit Socket 3/8" 80466 6 mm Slotted Bit Socket 3/8" 80467 # 1 Phillips Bit Socket 3/8" 80468 # 2 Phillips Bit Socket 3/8" 80469 # 3 Phillips Bit Socket 3/8" PATENTED 80470 # 2 Pozidriv® Bit Socket 3/8" 80480 1/4" Bit Adapter Socket 3/8" 80481 5/16" Bit Adapter Socket 3/8"

83103 - 3 Pc. Slide Rail Socket System 1/4", 3/8", & 1/2” DRIVE

Item No. Description PATENTED 83105 Slide Socket Rail (Red) 1/4" Dr. 83101 Slide Socket Rail (Red) 3/8" Dr. 83102 Slide Socket Rail (Red) 1/2" Dr. OR 83106 Slide Socket Rail (Blue) 1/4" Dr. 83107 Slide Socket Rail (Blue) 3/8" Dr. 83108 Slide Socket Rail (Blue) 1/2" Dr.

83112 - 3 Pc. Socket Rail Clips 1/4" DRIVE

83113 - 3 Pc. Socket Rail Clips 3/8" DRIVE

83114 - 3 Pc. Socket Rail Clips 1/2" DRIVE

45 CFT Vo-tech '08-09 4/23/08 10:12 PM Page 46

Flexible Hex Keys, Oil Drain Plug Socket and Serpentine Belt Tool Sets

82400 - 5 Pc. SAE Flexible Hex Key Set

Item No. Description Item No. Description 45053 3/16” 45056 5/16” 45054 7/32” 45057 3/8” 45055 1/4”

PATENTED

82410 - 6 Pc. METRIC Flexible Hex Key Set

Item No. Description Item No. Description 45090 3 mm 45093 6 mm 45091 4 mm 45094 8 mm 45092 5 mm 45095 10 mm

PATENTED

82420 - 6 Pc. TORX ® Flexible Key Set

Item No. Description Item No. Description 45080 T-25 45085 T-40 45081 T-27 45087 T-45 45082 T-30 45089 T-50

PATENTED

3870 - 7 Pc. Magnetic Oil Drain Plug Socket Set

Item No. Description 3872 13 mm Magnetic Oil Drain Plug Socket 3873 14 mm Magnetic Oil Drain Plug Socket 3874 15 mm Magnetic Oil Drain Plug Socket 3875 16 mm Magnetic Oil Drain Plug Socket 3876 17 mm Magnetic Oil Drain Plug Socket 3877 19 mm Magnetic Oil Drain Plug Socket 235080GR 3/8" (20 mm) GearRatchet™ Handle

PATENT PENDING

3680 - 15 Pc. Serpentine Belt Tool Set

Item No. Description 3680-71 Long Bar 3680-72 GearWrench® Special Ratcheting Wrench 3680-73 3/8" Adapter 3680-74 1/2" Adapter 3680-75 3/4" Adapter 3680-85 6 Pt. 13 mm Socket 3680-76 6 Pt. 14 mm Socket 3680-77 6 Pt. 15 mm Socket 3680-78 6 Pt. 16 mm Socket 3680-79 6 Pt. 17 mm Socket 3680-80 6 Pt. 18 mm Socket 3680-84 6 Pt. 19 mm Socket 3680-81 13 mm Crowfoot 3680-82 14 mm Crowfoot 3680-83 15 mm Crowfoot 46 CFT Vo-tech '08-09 4/30/08 10:01 PM Page 47

Specialty Tools and Magnetic Parts Trays

3880 - 5 Pc. Tap and Die Drive Tool Set

Item No. Description 3881 Tap and Die Ratcheting “T” Wrench 3882 Small Tap Adapter 3883 Medium Tap Adapter 3884 Die Adapter - Sliding “T” for adapters

PATENT PENDING

3831 - 4 Pc. Ratcheting Pliers Hose Clamp Set

Item No. Description 3800 GearPlier ™ Handle 3801 Straight Hose Clamp Tip 3802 Long Angled Hose Clamp Tip 3803 Short Angled Hose Clamp Tip

PATENTED

83104 - Universal Magnetic Parts Tray - Circular

Description • Magnetic inside surface for securing of metal objects • Adjustable to secure items in horizontal or vertical positions • Magnet coated with rubber sleeve for surface protection • Great for mounting on toolboxes

83115 - Universal Magnetic Parts Tray - Rectangular

Description • Magnetic inside surface for securing of metal objects • Adjustable to secure items in horizontal or vertical positions • Magnet coated with rubber sleeve for surface protection • Great for mounting on toolboxes

*See your industrial distributor for the full line of GearWrench products.

47 CFT Vo-tech '08-09 4/23/08 10:12 PM Page 48

Automotive Service Kits

Brake Service Kit - 41520 Kit Features: • Upgraded heavy duty brake spreader - Use with both a 5/16" socket wrench or use by hand. • Brake lining thickness gauge - Color coded brake gauge identifies thickness levels for brake lining inspection. Kit works on both disc and drum brake systems. Use to adjust clearance between drum brakes and shoe, remove and install shoe return springs and brake pads.

Item No. Description 287 Drum Brake Adjusting Tool 298 Brake Spring Pliers 2774 Universal Brake Shoe Retaining Spring Tool 3163 Disc Brake Piston Tool 3355 GM-Ford Disc Brake Piston Tool 3252 Disc Brake Pad Spreader 3962 Brake Lining Thickness Gauge 58707 7mm Hex Socket 58708 8mm Hex Socket 58710 10mm Hex Socket 58832 1/4" Hex Socket 58835 3/8" Hex Socket 58911 T-40 Torx® Socket 58913 T-45 Torx® Socket 58914 T-50 Torx® Socket

Pneumatic Tie Rod / Ball Joint Separator Kit - 41610 Kit Features: • Includes most popular sizes - 1-1/8", 15/16", and 11/16". • Chrome plated - Protects against corrosion and improved visibility. • Knurled handle - Improves grip. • Storage case Works with hand and pneumatic air systems to remove Tie rods, ball joint and pit- man arm assemblies.

12 Pc. Fuel & Transmission Line Disconnect Tool Kit - 41500 Disconnect tools that separate fittings on fuel, filter, transmission, air conditioning systems and fuel tank return lines on most vehicles, trucks and other heavy equipment.

Item No. Description 3321 GM & Ford Disconnect Tool 3408 Ford Fuel Line Coupling Tool 3413 Ford Hydraulic Clutch Line Disconnect Tool 3890 Chrysler Quick Disconnect Coupler Tool 3891 Ford EFI Fuel Line with Hair Pin Connector Tool 3892 GM Hydraulic Clutch Line Disconnect Tool 3893 GM Transmission Oil Cooler Line Disconnect Tool 3894 Ford Oil Cooler Line Disconnect Tool 3895 Fuel Line Disconnect - 1/4" (Black) 3896 Fuel Line Disconnect - 5/16" (Red 3897 Fuel Line Disconnect - 3/8" (Gold) 3898 Oil Cooler Line Disconnect (Blue) 41513 Replacement Bands

48 CFT Vo-tech '08-09 4/23/08 10:12 PM Page 49

Automotive Service Kits

Power Steering Pump Pulley Kit - 41560

This kit removes and installs power steering pump pulleys off most domestic vehicles.

Item No. Description 3893 Disconnect Tool 41561 Bushing and Screw Set 41562 Bushing and Screw Set

Compact Universal Pulley Holder Kit - 41530 Kit Features: • Compact pulley holder - Holds pressed on fan clutch pulleys including single and dual overhead cam sprockets. • Small pin set • Large pin set Adjustment screw available for position holding. Pin set can be changed out by screwing pins into the end of each bar.

Item No. Description 3901 Small Pin set (5 x 8mm) 3902 Large Pin set (6 x 10mm, 7.5 x 18mm, Cam Pins)

Fan Clutch Service Kit - 41580 This versatile kit covers most vehicles with bolt on pulleys and also newer Chrysler engines with press on pulleys requiring special pins to hold housing. Features the patented universal pulley holder.

Item No. Description 3900 Universal Pulley Holder 3901 Pin Set Small (5 x 8mm) 3902 Pin Set Large (Cam Pins, 6 x 10mm, 7.5 x 18mm) 3903 22mm Fan Nut Wrench 3136-76 36mm Fan Nut Wrench 3422 40mm Fan Nut Wrench 3473 47mm Fan Nut Wrench 3904 50mm Fan Nut Wrench

PATENTED

8 Pc. Master Sensor Socket Kit - 41720 Designed for the removal and installation of oxygen sensors, oil pres- sure sending units, and vacuum switches. Item No. Description 3919 1-3/16" (29mm) 1/2" Dr. Oil Sensor Socket 3920 7/8" (22mm) Slotted 3/8" Dr. PVS, TVS & O2 Skt 3921 1-1/16" (27mm) 1/2" Dr. GM Thermal Sensor Switch Skt 3922 7/8" (22mm) Oxygen Sensor Socket 3923 1-1/16" Oil Pressure Sending Unit Skt. 3/8" Dr. 3924 7/8" (22mm) Oxygen Sensor Socket 3925 7/8" (22mm) Low Profile Offset Oxygen Sensor Skt 3926 1-1/16" Short access socket 3/8" Dr.

49 CFT Vo-tech '08-09 4/23/08 10:12 PM Page 50

Automotive Service Kits

3 Pc. Magnetic Spark Plug Kit - 41730 This kit contains long reach “magnetic” swivel spark plug sockets. Covers sizes 5/8",13/16", and the new 9/16" on Ford Triton Engines.

Item No. Description 3928 6 inch 5/8" Swivel Magnetic Spark Plug Socket 3930 6 inch 13/16" Swivel Magnetic Spark Plug Socket 3931 2.5 inch 9/16" Magnetic Spark Plug Socket

3 Pc. Magnetic Swivel Spark Plug Kit - 41740 Long reach 5/8" “magnetic” swivel spark plug socket set. Lengths of 4", 6", and 11". Item No. Description 3927 4 inch 5/8" Magnetic Swivel Spark Plug Socket 3928 6 inch 5/8" Magnetic Swivel Spark Plug Socket 3929 11 inch 5/8" Magnetic Swivel Spark Plug Socket

Harmonic Balancer Puller Kit - 41750

Removes and installs the harmonic balancer on most popular Chrysler, Hyundai and Mazda without removing the radiator.

Item No. Description 41751 Puller Body 41752 Pin Set 41753 Holding Ring

3 Pc. Oil Pump Primer Kit - 41770

Oil Pump Primers protect freshly rebuilt or modified engines from pre- mature wear caused by a dry start.

Item No. Description 3446 GM Oil Pump Primer 3447 Ford Oil Pump Primer 1/4" Hex Dr. 3448 Ford Oil Pump Primer 5/16" Hex Dr.

SAE & Metric Clutch Alignment Kit - 41810

Aligns single disc clutches on domestic and imported cars, light trucks, and tractors.

Item No. Description 41811 2 Pc. Driver Bars: SAE & Metric 41812 3 Pc. Cone Set: SAE & 2 Metric 41813 7 Pc. Bushing Set: SAE 41814 5 Pc. Bushing Set: Metric

50 CFT Vo-tech '08-09 4/23/08 10:12 PM Page 51

Automotive Service Kits

3 Pc. Oil Filter Canister Socket Kit - 41830

Specially designed low profile socket sets for removal of oil filter canisters and covers.

Item No. Description 3933 Oil Filter Cap Wrench 27mm: VW 3932 Oil Filter Cap Wrench 32mm: GM, Saturn 3934 Oil Filter Cap Wrench 36mm: Volvo, VW, Ford Trucks

7 Pc. Axle Nut Kit - 41650 These 7 extra long 1/2" drive 6 point metric sockets are ideal for heavy-duty use in removing and installing axle nuts. Use with a ratchet, breaker bar, impact wrench, or torque wrench.

Item No. Description 3161 30mm Axle Nut Socket 3162 36mm Axle Nut Socket 3270 32mm Axle Nut Socket 3449 34mm Axle Nut Socket 3907 29mm Axle Nut Socket 3908 35mm Axle Nut Socket 3909 38mm Axle Nut Socket

6 Pc. Spindle Nut Kit - 41660 These 6 chrome vanadium steel 1/2" drive sockets are for most 4WD SUV and light truck axle locknut applications. Use with a torque wrench, ratchet, or breaker bar.

Item No. Description 2467 4-Lug 4WD Spindle Nut Skt 1/2 to 3/4 - Ton Dana 44 2770 6-Lug 4WD Spindle Nut Skt 3/4 to 1-Ton Dana 44 3195 4-Lug with Extension 1/2-Ton Dana 80 3910 4WD Spindle Puller 3911 Toyota Lock Nut Tool 3937 4-Lug 4WD Spindle Nut Skt 1/2 -Ton Dana 50

7 Pc. Locknut Kit - 41670

Perfect for late model Ford, Dodge, and Toyota trucks. This versatile kit contains seven of the most popular wheel bearing locknut sockets.

Item No. Description 2432 2-3/8" Hex Locknut Socket 2434 2-3/8" Rounded Hex Locknut Socket 2435 2-1/2" Hex Locknut Socket 2436 2-9/16" Rounded Hex Locknut Socket 3455 2-1/2" Rounded Hex Locknut Socket 3456 2-3/4" Rounded Hex Locknut Socket 3912 55mm Hex Locknut Socket

51 CFT Vo-tech '08-09 4/23/08 10:12 PM Page 52

Automotive Service Kits

Steering Wheel Puller Kit - 41620

This kit has what it takes to remove a steering wheel from most domestic and import cars with or without telescoping tilt columns. Use the puller legs with the steering wheel puller to remove steering wheels on late model GM vehicles. Steering wheel lock-plate depressor also included.

Item No. Description 2291 Puller Yoke and Screw Extension Bushing 3509 Lock Plate Removal Tool 3510 2 Pc. Puller Leg Package 3906 Pivot Pin 41623 Lock Plate Depressor Frame 41624 Lock Plate Remover Collars & Nut Washer 41625 Screw Package

Front End Service Kit - 41690

This versatile set allows for easy removal of the most popular types of Pitman arms, tie rods, and ball joints.

Item No. Description 2289 Pitman Arm Puller 22 x 140mm 3533 Tie Rod Puller 3916 Universal Ball Joint Separator 3917 Tie Rod End Puller and Pitman Arm Puller 3918 Universal Tie Rod End Remover

Slide Hammer Puller Kit - 41700

This kit provides a wide range of puller applications such as: Flange- type axles, oil seals & other press fit parts. Jaws can be set up for 2 or 3 jaw internal or external pulling jobs.

Item No. Description 2300-71 Shallow Flange 2300-75 Deep Flange 3591 Slide Hammer 41704 2 Way Yoke 41705 3 Way Yoke 41706 Center Bolt and Cone 41707 3 Pc.Adapter Set 41708 Leg Package with Screws

Rear Axle Bearing Puller Kit - 41710

Three pullers designed to make the removal of semi-floating rear axle bearings easier on most domestic cars.

Item No. Description 41711 1" x 1-7/8" Puller 41712 1-5/16 " x 2-3/8" Puller 41713 1-3/8" x 2-7/8" Puller

52 CFT Vo-tech '08-09 4/23/08 10:12 PM Page 53

Automotive Service Kits

Double Flaring Tool Kit - 41860

• Features - Complete double flaring tool assortment. - Slots on yoke firmly engage with bar assembly. - Includes corresponding adapters for forming double flares. - Storage case with full instructions. - Forged alloy steel. - Through hardened. Precisely flares tubing up to 0.040 wall thickness to SAE 45° flares. Hardened bar assembly clamps 7 tubing sizes: 3/16", 1/4", 5/16", 3/8", 7/16", 5/8", and 1/2". Do not use on stainless steel tubing. Set Contains: SAE Bar Assembly, Yoke Assembly, Reamer, 3/16" Flaring Tool Adapter, 1/4" Flaring Tool Adapter, 5/16" Flaring Tool Adapter, 3/8" Flaring Tool Adapter, 7/16" Flaring Tool Adapter, 1/2" Flaring Tool Adapter, and 5/8" Flaring Tool Adapter.

Item No. Description 41594 7 Pc. Flaring Adapter Set 41596 Universal Yoke 3905 Deburring Tool 41595 Holding Bar

Bubble Flaring Tool Kit - 41870

• Features - Complete bubble flaring tool assortment. - Slots on yoke firmly engage with bar assembly. - Includes corresponding adapters for forming double flares. - Storage case with full instructions. - Forged alloy steel. - Through hardened. Precisely flares tubing up to 0.040 wall thickness to Metric 45° flares. Hardened bar assembly clamps 4 tubing sizes: 4.7, 6, 8, & 10mm. Do not use on stainless steel tubing. Set Contains: Metric Bar Assembly, Yoke Assembly, Reamer, 4.7mm Flaring Tool Adapter, 6mm Flaring Tool Adapter, 8mm Flaring Tool Adapter, and 10mm Flaring Tool Adapter.

Item No. Description 41599 4 Pc. Bubble Flaring Adapter Set 41596 Universal Yoke 3905 Deburring Tool 41598 Bubble Flaring Tool Holding Bar

53 CFT Vo-tech '08-09 4/23/08 10:12 PM Page 54

Automotive Service Kits

Double / Bubble Flaring Tool Kit - 41880 • Features - Complete double and bubble flaring tool assortment. - Slots on yoke firmly engage with bar assembly. - Includes corresponding adapters for forming double flares. - Storage case with full instructions. - Forged alloy steel. - Through hardened. Precisely flares tubing up to 0.040 wall thickness to SAE/Metric 45° flares. Hardened bar assembly clamps 11 tubing sizes: 3/16", 1/4", 5/16", 3/8", 7/16", 5/8", 1/2", 4.7, 6, 8, and 10mm. Do not use on stainless steel tubing. Set Contains: SAE Bar Assembly, Metric Bar Assembly, Yoke Assembly, Reamer, Cutter, 3/16" Flaring Tool Adapter, 1/4" Flaring Tool Adapter, 5/16" Flaring Tool Adapter, 3/8" Flaring Tool Adapter, 7/16" Flaring Tool Adapter, 1/2" Flaring Tool Adapter, 5/8" Flaring Tool Adapter, 4.7 mm Flaring Tool Adapter, 6mm Flaring Tool Adapter, 8mm Flaring Tool Adapter, and 10mm Flaring Tool Adapter. Instructions for use: • Cut desired tubing with mini tubing cutter provided. • Ream inside edge of tubing with reamer provided. Doing so will improve effectiveness of flare applications. • Place tubing into assigned hole in holding. Allow tubing to extend above the bar by a distance equal to the width of the top of the adapter. • Place adapter inside of tube. • Position the yoke press over the holding bar and center on the adapter. • Apply force to the adapter and tube.

Item No. Description 41594 7 Pc. Flaring Adapter Set 41599 4 Pc. Bubble Flaring Adapter Kit 41596 Universal Yoke 3905 Deburring Tool 41595 Holding Bar 41598 Bubble Flaring Tool Holding Bar 2701 Cutter

Master Tubing Service Kit - 41590 For tubing service. No other kit does all this: Double Flare, Bend, Cut, Ream, and Deburr.

Item No. Description 2107 Mini Tubing Cutter 2189 Tubing Bender 3905 Deburring Tool 41594 Flaring Adapter Kit 41595 Holding Bar 41596 Yoke

54 CFT Vo-tech '08-09 4/23/08 10:12 PM Page 55

Automotive Service Kits

Bearing Race and Seal Kit - 41630 Allows you to install tapered bearing races and seals without damage to the component or housing. Includes a driver handle plus 9 popular bearing and seal drivers ranging from 1.565" to 3.180".

Item No. Description Item No. Description 41631 Driver Handle 41636 2.470" Driver 41632 1.565" Driver 41637 2.555" Driver 41633 1.750" Driver 41638 2.830" Driver 41634 1.961" Driver 41639 2.995" Driver 41635 2.325" Driver 41640 3.180" Driver

Radio Removal Kit & Antenna Wrench Kit - 41680 Kit includes the tools needed to remove the radio from the dash on many domestic and import vehicles without damage to the radio or the dash panel. Antenna nut sockets fit over antennas and down into deep well locations.

Item No. Description 3913 Ford Radio Removal Tool 3914 Key Set 3915 Antenna Nut Socket Set

8 Pc. Metric and SAE Stud Removal Kit - 41760 Complete SAE and Metric stud remover set offers the best professional extractors available. Designed and tested to reach studs in difficult work areas.

Item No. Description Item No. Description 41761 Remover Skt: 6mm 3/8" Dr. 41765 Remover Skt: 3/8" 1/2" Dr. 41762 Remover Skt: 8mm 3/8" Dr. 41766 Remover Skt: 7/16" 1/2" Dr. 41763 Remover Skt: 10mm 1/2" Dr. 41767 Remover Skt: 5/16" 3/8" Dr. 41764 Remover Skt: 12mm 1/2" Dr. 41768 Remover Skt: 1/4" 3/8" Dr.

General Purpose Bushing Driver Kit - 41780 Perfect for removing and inserting bushings in cars, trucks buses, tractors, construction and off-road equipment. This set includes small, medium, and large drivers and bushing adapters from 3/8" to 1-3/8".

Item No. Description Item No. Description 41781 Bushing Adptr. (3/8"-7/16") 41793 Bushing Adptr. (15/16"- 1-1/16") 41782 Bushing Adptr. (7/16"-1/2") 41794 Bushing Adptr. (1"-1-1/8") 41783 Bushing Adptr. (15/32"-17/32") 41795 Bushing Adptr. (1-1/16"- 1-3/16") 41785 Bushing Adptr. (1/2"-5/8") 41796 Bushing Adptr. (1-1/8"- 1-1/4") 41786 Bushing Adptr. (9/16"-11/16") 41797 Bushing Adptr. (1-3/16"- 1-5/16") 41687 Bushing Adptr. (5/8"-11/16") 41798 Bushing Adptr. (1-1/4"- 1-3/8") 41688 Bushing Adptr. (5/8"-3/4") 41799 Driver #1 41689 Bushing Adptr. (11/16"-13/16") 41800 Driver #2 41790 Bushing Adptr. (3/4"-7/8") 41801 Driver #3 41791 Bushing Adptr. (13/16"-15/16") 41802 Driver Nut #1 and #2 41792 Bushing Adptr. (7/8"-1")

55 CFT Vo-tech '08-09 4/23/08 10:12 PM Page 56

Specialty Application Tools

SAE Impact Driver Set - 1140 Free frozen bolts and screws by twisting the tool in the direction of the rotation and holding while striking with a hammer. Reverse action to tighten bolts. Set is standard 3/8˝ square drive and includes a 3/8˝ square drive adapter for 5/16˝ hex bits. Four-bit set includes a No. 2 and No. 3 Phillips and a 5/16˝ and 9/32˝ slotted. Set is a serviceable product and replacement bits are available individually. • Replacement part: 412402 No. 2 Phillips • Replacement part: 412403 No. 3 Phillips • Replacement part: 412410 5/16˝ Slotted • Replacement part: 412406 9/32˝ Slotted

Spiral Screw Extractor Kit - 2419 Removes screws, broken studs, set screws, pipe and Alemite fittings. Drill a hole in the screw and place extractor into hole. Tap lightly with hammer and turn counterclockwise with tap wrench to remove the screw. Spiral blades grip screw. Extractors fit the following (see chart).

Item No. Screw, Bolt or Stud Size Drill Size 2419-71 No. 12 to 5/16˝ 7/64˝ 2419-72 5/16˝ to 7/16˝ 5/32˝ 2419-73 7/16˝ to 9/16˝ 1/4˝ 2419-74 9/16˝ to 3/4˝ 17/64˝

Vibro Engraver - 2520

Use to identify valuables permanently. Carbide tip engraves metal, plastic, wood, glass and other surfaces. Variable speed knob controls the depth of engraving. Tool operates on 115VAC.

Heavy-Duty Hook and Pick Set - 3476 The set includes part numbers 3470, 3474 and 3475. The tools included are ideal for use anywhere a hook/removal tool, spring removal tool or a sharp punch is required. All three tools feature corrosion resistant zinc plating and a high visibility orange robust handle.

Hook and Pick Set - 3121 Five-piece set includes a 5˝ aluminum handle knurled for a sure grip. It also includes the following heat-treated, high carbon steel picks: O-ring, 90°, straight and hook. Use picks to pull O-rings, seals, cotter pins and brushes quickly and easily.

Scriber - 2979

Sharp, tempered point scribes metal. Hooked end removes O-rings, seals and gaskets. It has a 90° hook. Length: 8˝.

56 CFT Vo-tech '08-09 4/23/08 10:12 PM Page 57

Body Tools

3 Pc. Body Clip Set - 41850

Item No. Description 3888 80˚ Push Pin Pliers 3729 30˚ Push Pin Pliers 3705 Panel Clip Pliers with “V” design for removal of standard clips without center pins.

Spring Clip Pliers - 3706 Our patented 3706 Spring Clip Plier removes spring clips quickly, easily and without damage. This high quality tool is chrome plated for corrosion protection and features a cushion-grip handle for added comfort. The jaws adjust to allow easy removal of both 1/8" and 1/4" spring clips.

4 Pc. Body Trim Set - 3786 Set contains a selection of the most popular door, handle and trim tools covering a wide range of service applications, which allow you to get the job done faster. Trim Tools feature the new Heavy duty handle design and black oxide shanks. Door Panel Remover - 3786-73 For plastic clips on GM and VW door panels. Unique square groove design makes the removal of door panels and other selected trim easier. Notch slips under plastic trim clips to easily pop them out while minimizing damage to panels. Door Panel Remover - 3786-72 For plastic clips on most foreign and domestic door panels. Door Trim Pad Tool - 3786-71 Unique “V” groove design makes the removal of door panels and other selected trim easier. Notch slips under plastic trim clips to easily pop them out while minimizing damage to panels. For GM vehicles. Special v-notch groove permits user to engage and quickly remove a variety of body and trim fasteners. Bent shank provides additional leverage to easily remove difficult trim fasteners without damage. Door Handle and Window Lift Tool - 431 Tool compresses door handle spring clip to remove handle with clip intact. Works on most GM, Ford and other vehicles using spring clips.

57 CFT Vo-tech '08-09 4/23/08 10:12 PM Page 58

Automotive Serice Kits and Allen Plas-T-Key® Set

Rear Brake Caliper Kit - 41540 Set designed for vehicles with brake pistons that are mechanically tied to the parking brake and require a turning action to push back. Set covers most domestic and import vehicles. Item No. Description 41541 Applicator & Pad 41542 Adapter 0: 2-1/2", 1 Pin 41543 Adapter 2: 2", 3 Pin 41544 Adapter 3: 2-1/4", 3 Step 41545 Adapter 4: 1-1/4", 2 Pin 41546 Adapter 5: 1-3/8", 2 Pin 3/8" Dr. 41547 Adapter 6: 1-5/8", 2 Pin (L) 41548 Adapter 7: 1-5/8", 2 Pin (S) 41549 Adapter 8: 1- 7/8", 1 Pin 41550 Adapter P: 2-1/4", 1 Pin

Master Bolt Grip Kit - 41600

Master Bolt Grip Kit works on harmonic balancers, steering wheels, crankshaft pulleys, and gears. Capable of handling almost every two or three-way bolt pull possible on most cars, pickups, SUV's, and small engines.

Item No. Description 41601 Two or three way Yoke 41602 4 Pc. Tip Set 41603 Metric Bolt Set 41604 SAE Bolt Set 41605 Center Screw for Puller (2)

Plas-T-Key ® Set - Metal Stand

Item No. No. of Keys Key Sizes (Inch) Key Length (Inch) 56112 10 3/32, 7/64, 1/8, 9/64, 5/32, 6 3/16, 7/32, 1/4, 5/16, 3/8

58 CFT Vo-tech '08-09 4/23/08 10:12 PM Page 59

PRODUCT WARRANTIES

Craftsman® Product Warranty Reference Table Product Section Warranty Tool Storage Professional Boxes Limited Lifetime Warranty, Repair or Replace Ball Bearing Units No Warranty Long Distance Carts No Warranty Standard Boxes No Warranty Machinist Boxes No Warranty Project Centers No Warranty Hand Boxes / Totes No Warranty Carts & Workbenches No Warranty Shop Storage No Warranty Bags, Belts, Aprons No Warranty Organizers No Warranty Truck Boxes Limited Warranty; three years Gang Boxes No Warranty To order Tool Storage Service parts call: 1-800-225-2864 Tool Sets Professional Sets See individual Component Warranty. Warranties only apply to Craftsman Professional Modules Branded products. Set packaging is not covered under Warranty. Mechanic’s Tool sets Trade Sets Special Purpose Sockets, Ratchets and Wrenches Sets See individual Component Warranty. Set packaging is not covered under Warranty. Sockets Craftsman Hand Tool Full Warranty Ratchets Craftsman Hand Tool Full Warranty Drive Tools Craftsman Hand Tool Full Warranty Impacts Craftsman Hand Tool Full Warranty Wrenches, All Types Craftsman Hand Tool Full Warranty Hex Keys Craftsman Hand Tool Full Warranty Torque Wrenches* Beam Craftsman Hand Tool Full Warranty Dial Limited Warranty; one year on defective material & workmanship, 90 day repair / recalibrate; Angle Repair and Calibration Service Micrometer Limited Warranty; one year on defective material & workmanship, 90 day repair / recalibrate; Angle Repair and Calibration Service

Hand Tools Pliers Craftsman Hand Tool Full Warranty Snips Craftsman Hand Tool Full Warranty; cutting edge must be resharpened Retaining Ring Pliers Craftsman Hand Tool Full Warranty Screwdrivers Craftsman Hand Tool Full Warranty Bolt Out No Warranty Nut Drivers Craftsman Hand Tool Full Warranty Punches & Chisels Craftsman Hand Tool Full Warranty Hammers Craftsman Hand Tool Full Warranty Pry Bars Craftsman Hand Tool Full Warranty Putty Knives Craftsman Hand Tool Full Warranty Files Craftsman Hand Tool Full Warranty Brushes Craftsman Hand Tool Full Warranty Hand Saws Craftsman Hand Tool Full Warranty Knives Utility Knives Craftsman Hand Tool Full Warranty Utility Blades No Warranty Pocket Knives Craftsman Hand Tool Full Warranty

*For Torque Wrench Repair: Angle Repair & Calibration Service; 304-253-5729 175 Angle Drive; Beckley West Virginia 25801 59 CFT Vo-tech '08-09 4/23/08 10:12 PM Page 60

PRODUCT WARRANTIES

Craftsman® Product Warranty Reference Table Product Section Warranty Nailers & Staplers Manual Staplers Craftsman Hand Tool Full Warranty Hammer Tackers Craftsman Hand Tool Full Warranty Power Nailers & Staplers Limited Warranty; one year repair / replace Measuring Tools Aluminum Squares Craftsman Hand Tool Full Warranty Block Plane Craftsman Hand Tool Full Warranty Stud Finders Limited Warranty; 90 day commercial repair / replace Levels Craftsman Hand Tool Full Warranty Laser Levels Limited Warranty; 90 day commercial repair / replace Tape Measures Limited Warranty; defective material and workmanship Wood Rules Craftsman Hand Tool Full Warranty Tape Reels Craftsman Hand Tool Full Warranty Other Measuring Equipment Plumb Bob Craftsman Hand Tool Full Warranty Riveters Limited Warranty; one year Trade Tools Strippers and Crimpers Wire Strippers Craftsman Hand Tool Full Warranty Wire Crimpers Limited Warranty; one year Electrical Tools Multimeter, Clamp-on meter Limited Warranty; 90 day commercial repair / replace Multitester Limited Warranty; 6 months commercial repair / replace Wire Fishing Sticks No Warranty Pipe Tools Pipe Wrenches Craftsman Hand Tool Full Warranty Strap Wrenches Craftsman Hand Tool Full Warranty Basin Wrench Craftsman Hand Tool Full Warranty Tubing Cutters/Benders Craftsman Hand Tool Full Warranty (No warranty on cutting wheel) Taps and Dies No Warranty Automotive Tools Brake Tools Craftsman Hand Tool Full Warranty Hose Pliers Craftsman Hand Tool Full Warranty Lug Wrenches Craftsman Hand Tool Full Warranty Piston & Valve Tools Craftsman Hand Tool Full Warranty Ring Compressors Craftsman Hand Tool Full Warranty Auto Pullers Craftsman Hand Tool Full Warranty Steering Wheel Pullers Craftsman Hand Tool Full Warranty Gauges / Testers Thickness Gauge Craftsman Hand Tool Full Warranty Ignition & Spark Plug Wire Sets Craftsman Hand Tool Full Warranty Timing Lights and Analyzers Limited Warranty; one year Vacuum Gauge and Pump Limited Warranty; one year Body Tools Hammers Craftsman Hand Tool Full Warranty Dollies Craftsman Hand Tool Full Warranty Inspection Mirrors Craftsman Hand Tool Full Warranty Magnetic Pick Up Tools Craftsman Hand Tool Full Warranty Battery Chargers Limited Warranty; 6 months Creepers & Seats Creepers Limited Warranty; one year on defective material & workmanship, repair / replace Oil Filter Wrenches Craftsman Hand Tool Full Warranty Grease Gun Limited Warranty; one year Mechanic’s Seats Limited Warranty; one year on defective material & workmanship, repair / replace

60 CFT Vo-tech '08-09 4/23/08 10:12 PM Page 61

PRODUCT WARRANTIES

Craftsman® Product Warranty Reference Table Product Section Warranty Jacks & Lifts Hydraulic Floor Jacks Limited Warranty; 90 day commercial repair / replace Cranes Limited Warranty; 90 day commercial repair / replace Jack Stands Limited Warranty; 90 day commercial repair / replace Hydraulic Presses Limited Warranty; 30 day commercial repair / replace To order hydraulic service parts call: 1-888-332-6419 Precision Tools Calipers Limited Warranty; one year Micrometers Limited Warranty; one year Dial Indicators Limited Warranty; one year Machinist’s Square Limited Warranty; one year Power & Air Tools Items over $200 List meeting Warranty criteria should be returned for repair using the Industrial Warranty Repair Order Form. Items under $200 meeting Warranty criteria should be returned for credit through a Danaher Customer Service Representative. Power Tools Cordless Tools Professional Limited Warranty; one year Craftsman Limited Warranty; 90 day commercial repair / replace Corded Tools Professional Limited Warranty; one year Craftsman Limited Warranty; 90 day commercial repair / replace Stationary & Bench Professional Limited Warranty; 90 day commercial repair / replace Craftsman Limited Warranty; 90 day commercial repair / replace Bits & Blades No Warranty Air Compressors Limited Warranty; 90 day commercial repair / replace Air Tool Accessories Accessories No Warranty Air Hoses No Warranty Hose Reels Limited Warranty; one year Air Tools Impact Wrenches Limited Warranty; 90 day commercial repair / replace Drills Limited Warranty; 90 day commercial repair / replace Ratchets Limited Warranty; 90 day commercial repair / replace Hammers, Saws, Shears Limited Warranty; 90 day commercial repair / replace Grinders, Sanders Limited Warranty; 90 day commercial repair / replace Nailers Limited Warranty; 90 day commercial repair / replace Nailer Accessories Limited Warranty; one year Spray Guns Limited Warranty; one year Maintenance Wet/Dry Vacs Limited Warranty; 90 day commercial repair / replace Vac Filters & Bags No Warranty Vac Accessories Limited Warranty; 90 day commercial repair / replace Clamps Craftsman Hand Tool Full Warranty Flashlights No Warranty Worklights / Lanterns Limited Warranty; 90 Day commercial / replace (No warranty on bulbs) To order most parts directly from Sears call: 1-866-732-7728

® GearWrench Products are Warranted for Life to be free of defects in Armstrong® Hand Tools: Unlimited Lifetime Warranty. If any Armstrong® Hand Tool (excluding torque products) material and workmanship. Carrying cases, pouches, if any, taps, dies, ever fails to give complete satisfaction, return it to your Armstrong Distributor, and it will be replaced or repaired and accessory bits are not covered by warranty. free of charge. Carrying cases and pouches, if any, are covered under this Warranty. Armstrong® Torque Products: Limited Lifetime Warranty.* Armstrong® Torque Products are warranted for Life to be (1) free of defects in material and workmanship and (2) meet out of the box calibration accuracy standards as stated in the product literature. Accuracy standards for calibration are warranted for 90 days from date of KD Tools offer a lifetime warranty, limited to the repair or replacement, at our purchase. Products must be sent, at buyer’s cost, for evaluation to Angle Repair & Calibration Service, Inc.** option, of all non-serviceable products found to be defective in materials or Armstrong® Torque Products are precision instruments that contain moving parts. These components are subject workmanship. Factory inspection will determine if the tool is defective. This to normal wear through use and replacement thereof is the responsibility of the user. Torque Products should be warranty does not apply to any product which has been misused, abused, or routinely checked for calibration at an Authorized Repair Center using Armstrong repair parts. altered in any way, or worn out from use. Lifetime warranty does NOT apply to *This Warranty shall not apply to products that have been misused, abused, damaged by accident or otherwise, repaired by 'consumable' products, which by nature of their application will wear out with anyone other than an Authorized Repair Center or modified by anyone other than Danaher. Normal wear is also excluded. normal use. Such items would include, but is not limited to hacksaw blades. **Angle Repair & Calibration Service, Inc. 175 Angle Drive, Beckley, West Virginia 25801 (304) 253-5729 61 CFT Vo-tech '08-09 4/23/08 10:12 PM Page 62

What’s better than Craftsman® Tools? FREE Craftsman®Tools.

A WIN-WIN offer from your CRAFTSMAN® Authorized Distributor Here’s how it works: When you buy Craftsman Tools, you 1. Purchase $500–$2,000 of Craftsman, WIN with quality and performance that Armstrong® or GearWrench® tools for lasts a lifetime. WIN again with our technical education special bonus for students. For every 2. Complete the redemption form and give $500 you spend on Technical it to your authorized distributor Education Products, you’ll get even more Craftsman Tools —absolutely free. 3. Choose the free tools you want based on the amount you spend

3 1 PROFESSIONAL ⁄8 INCH DRIVE FULL ⁄2 INCH DRIVE 12-PC EASY READ POLISH QUICK RELEASE TEARDROP LASER ETCHED IMPACT SOCKET SET RATCHET 9-15884 9-15885 $64 9-44813 9-44833 $28 SAE MET VALUE 5 7 ⁄8" 11" VALUE

7-PC LOCKING FLEX WRENCH SET 5-PC LARGE COMBINATION WRENCH SET 9-42400 9-42401 $138 9-45965 9-45966 $139 SAE MET VALUE SAE MET VALUE

62 CFT Vo-tech '08-09 4/23/08 10:12 PM Page 63

TECHNICAL EDUCATION STUDENT REDEMPTION FORM

A WIN-WIN offer from your CRAFTSMAN®Authorized Distributor

3 1 PROFESSIONAL ⁄8 INCH DRIVE ⁄2 INCH DRIVE 12-PC EASY FULL POLISH QUICK RELEASE READ LASER ETCHED 7-PC LOCKING FLEX 5-PC LARGE COMBINATION TEARDROP RATCHET IMPACT SOCKET SET WRENCH SET WRENCH SET 9-44813 9-44833 9-15884 9-15885 9-42400 9-42401 9-45965 9-45966 5 Purchase 7 /8" 11" SAE MET SAE MET SAE MET Amount $28 value $28 value $64 value $64 value $138 value $138 value $139 value $139 value $500 ❍ ❍ pick one $1,000 ❍ ❍ ❍ ❍ pick two $1,500 ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ pick one $2,000 ❍ ❍ ❍ ❍ ❍ ❍ ❍❍ pick two

1. Purchase $500–$2,000 of Craftsman, Armstrong®, GearWrench®, or KD tools for technical education. 2. Complete the redemption form and give it to your authorized distributor at the time of purchase. 3. Choose the free tools you want based on the amount you spend. 4. Obtain free product from your Authorized Craftsman Distributor—NO mail-in required.

PURCHASE INFORMATION

PLEASE PRINT THE FOLLOWING INFORMATION

BUYER NAME —————————————————————————————— NAME OF THE AUTHORIZED DISTRIBUTOR WHO PROVIDED TOOLS

ADDRESS ———————————————————————————————— ————————————————————————

CITY/STATE/ZIP —————————————————— SCHOOL NAME ————————————————————————

PHONE ———————————————————————————————————————— AMOUNT OF STUDENT PURCHASE ——————————————

E-MAIL ADDRESS (OPTIONAL)———————————————— DISTRIBUTOR PO OR INVOICE NUMBER ———————————— ❍ I would like to receive information about new products BUYER SIGNATURE and promotions from my Authorized Craftsman Industrial —————————————————— Distributor or Danaher Tool Group DATE ——————————————————————

Special Technical Education offer valid from May 15, 2008 through May 15, 2009 Offer not valid at SEARS or Fastenal®. Available only from participating Authorized Craftsman Distributors. Offer valid only for Technical Education purchases. 63 CFT Vo-tech '08-09 4/23/08 10:12 PM Page 64

PRODUCT INDEX

Part # Description Page Part # Description Page Part # Description Page

MECHANIC’S 85198 8 Pc. XL Combination Ratcheting TOOL SETS HAND TOOLS Wrench Set 37 9-2122 Industrial Maintenance Add-On Tool Set 20 9-46520 Cross-Force 8 Pc. SAE Set 29 891226 25 Pc. SAE/Metric XL Pass-Thru Ratchet Set 43 9-2124 Industrial Maintenance Tool Set 18 9-46521 Cross-Force 8 Pc. Metric Set 29 891427 27 Pc. SAE/Metric XL Pass-Thru Ratchet Set 43 9-2142 GM ASEP Set 23 9-47711 3/8" Dr. Electronic Torque Wrench 29 893823 23 Pc. SAE/Metric XL Pass-Thru Ratchet Set 43 9-2149 Ford ASSET Program Set 24 9-47712 1/2" Dr. Electronic Torque Wrench 29 9-2150 Metric Accessory Set 21 9-2155 Metric Accessory Set 22 9-2160 Metric Accessory Set 22 9-2167 AYES Tool Starter Set 25 27-895 Angle Wrench Add-On Set 19 1140 SAE Impact Driver Set 56 9-41200 Basic Field Technician Set - 235 Pc. 15 27-942 9 Pc. Full Polish Ignition Wrench Set 36 2419 Spiral Screw Extractor Kit 56 9-41203 Basic Field Technician Set - 145 Pc. 16 44-452 3/8" Dr. Impact Socket Set 26 2520 Vibro Engraver 56 9-41206 Basic Field Technician Set - 96 Pc. 17 44-453 3/4" Dr. Heavy Duty Repair Set 26 9-200356 Basic Aviation Tool Set 14 64-041 3/8" Dr. Micrometer Adjustable 2979 Scriber 56 9-200385 Basic Machine Tool Set 14 Torque Wrench 34 3121 Hook and Pick Set 56 9-200445 Basic HVAC Tool Set 13 64-046 3/8" Dr. Micrometer Adjustable 3476 Heavy Duty Hook and Pick Set 56 Torque Wrench 34 9-200452 Basic Auto Body Tool Set 13 3706 Spring Clip Pliers 57 64-085 1/2" Dr. Micrometer Adjustable 9-200461 Advanced HVAC Tool Set 10 Torque Wrench 34 3786 4 Pc. Body Trim Set 57 9-200497 Basic Auto/Diesel Tool Set 12 64-086 1/2" Dr. Micrometer Adjustable 41500 12 Pc. Fuel & Transmission Line 9-200499 Advanced Auto/Diesel Tool Set 6 Torque Wrench 34 Disconnect Kit 48 9-200500 1/4" & 3/8" Drive Mechanic's Tool Set 19 64-534 3/8" Dr. Electronic Torque Wrench 34 41520 Brake Service Kit 48 9-200550 Advanced Auto Body Tool Set 8 64-544 1/2" Dr. Electronic Torque Wrench 34 41530 Compact Universal Pulley Holder Kit 49 9-200560 Professional Auto Tool Set 4 68-163 Wiretwister, Manual, Diagonal Nose 35 41540 Rear Brake Caliper Kit 58 9-200562 Professional Diesel Tool Set 2 68-171 Wiretwister, Manual, Diagonal Nose 35 41560 Power Steering Pump Pulley Kit 49 9-200583 Advanced Aviation Tool Set 11 68-175 Wiretwister, Automatic, Diagonal Nose 35 41580 Fan Clutch Service Kit 49 9-800117 Brake and Front End Tool Set 20 68-191 Wiretwister, Deep Reach 35 41590 Master Tubing Service Kit 54 69-547 Deep Throat Dead Blow Hammer 36 41600 Master Bolt Grip Kit 58 72-442 Cone Puller Set 35 TOOL STORAGE 41610 Pneumatic Tie Rod/Ball Joint Separator Kit 48 72-497 10 Ton Slide Hammer Puller Set 35 41620 Steering Wheel Puller Kit 52 9-2112 40" Ball-Bearing 7-Drawer Tool Chest 31 78-431 C-Clamp, Deep Throat Pattern 36 41630 Bearing Race and Seal Kit 55 9-2113 40" Ball-Bearing 12-Drawer Tool Cart 31 41650 7 Pc. Axle Nut Kit 51 9-2117 41" 14-Drawer Long Distance Tool Cart 11 9-2118 12-Drawer Long Distance Tool Cart 33 41660 6 Pc. Spindle Nut Kit 51 9-59165 Contractor Case 10 3680 15 Pc. Serpentine Belt Tool Set 46 41670 7 Pc. Locknut Kit 51 9-59212 20" Extra Deep Steel Tool Box 33 3831 4 Pc. Ratcheting Pliers Hose Clamp Set 47 41680 Radio Removal Kit & Antenna Wrench Kit 55 9-59241 24" Extra Heavy Duty Steel Tool Box 33 3870 7 Pc. Magnetic Oil Drain Plug Socket Set 46 41690 Front End Service Kit 52 9-59714 Ball-Bearing 26" 5-Drawer Tool Chest 31 3880 5 Pc. Tap and Die Drive Tool Set 47 41700 Slide Hammer Puller Kit 52 9-59715 Ball-Bearing 26" 6-Drawer Roll-Away 31 8916 16 Pc. Ratcheting Nut Driver Set 41 41710 Rear Axle Bearing Puller Kit 52 9-59740 3-Drawer Ball-Bearing Griplatch Utility Cart 32 9240 4 Pc. Double Box Ratcheting Wrench Set 38 41720 8 Pc. Master Sensor Socket Kit 49 9-59756 4-Drawer Ball-Bearing Griplatch Utility Cart 32 9260 6 Pc. Double Box Ratcheting Wrench Set 38 41730 3 Pc. Magnetic Spark Plug Kit 50 9-59758 3-Drawer Ball-Bearing Griplatch Utility Cart 32 9304 4 Pc. Combination Ratcheting Wrench Set 37 41740 3 Pc. Magnetic Swivel Spark Plug Kit 50 9-59932 Professional 5-Drawer Tool Chest 30 9404 4 Pc. Combination Ratcheting Wrench Set 37 41750 Harmonic Balancer Puller Kit 50 9-59933 Professional 7-Drawer Tool Cart 30 80059 4 Pc. Long Screwdriver Set 40 41760 8 Pc. SAE/Metric Stud Removal Kit 55 9-65563 Professional 5-Drawer Tool Chest 30 80060 10 Pc. Combination and Pozidriv 41770 3 Pc. Oil Pump Primer Kit 50 9-65564 Professional 7-Drawer Tool Cart 30 Screwdriver Set 40 41780 General Purpose Bushing Driver Kit 55 9-65565 Professional 5-Drawer Tool Chest 30 80062 10 Pc. Insulated Pliers and Screwdriver Set 40 41810 SAE/Metric Clutch Alignment Kit 50 9-65566 Professional 7-Drawer Tool Cart 30 80063 7 Pc. Insulated Screwdriver Set 40 41830 3 Pc. Oil Filter Canister Socket Kit 51 Armstrong Products 80300 51 Pc. 1/4" Dr. SAE/Metric Socket Set 41 80550 57 Pc. 3/8" Dr. SAE/Metric Socket Set 42 41850 3 Pc. Body Clip Set 57 AIR TOOLS 80573 8 Pc. Long Ball Hex Bit Socket Set 44 41860 Double Flaring Tool Kit 53 9-19916 Pro 3/8-Inch Impact Wrench 27 80574 7 Pc. Long Ball Hex Bit Socket Set 45 41870 Bubble Flaring Tool Kit 53 9-19933 3/8-Inch Ratchet 27 80577 7 Pc. Screwdriver Bit Socket Set 45 41880 Double/Bubble Flaring Tool Kit 54 9-19952 1/4-Inch Straight Grinder 27 80700 49 Pc. 1/2" Dr. SAE/Metric Socket Set 42 56112 Plas-T-Key Ket 58 9-19953 Cut-Off Tool 27 80724 11 Pc. Torx Tamper-Proof Bit Socket Set 44 9-19976 Dual Action Sander 27 80726 36 Pc. Master Torx Set w/Hex Bit Sockets 44 9-19980 3/8-Inch Butterfly Impact Wrench 27 81908 11 Pc. 3/8" Dr. Crowfoot Wrench Set 39 9-19981 3/8-Inch Impact Wrench 27 81909 10 Pc. 3/8" Dr. Crowfoot Wrench Set 39 9-19983 1/2-Inch Impact Wrench 27 81910 5 Pc. Flex Flare Nut Wrench Set 38 81911 6 Pc. Flex Flare Nut Wrench Set 38 81990 3 Pc. Adjustable Wrench Set 39 AUTO BODY TOOLS 82106 2 Pc. Double-X Pliers Set 41 9-47288 Curved Cross Chisel Hammer 28 82400 5 Pc. SAE Flexible Hex Key Set 46 9-47289 General Purpose Pick Hammer 28 82410 6 Pc. Metric Flexible Hex Key Set 46 9-47290 Shrinking Hammer 28 82420 5 Pc. Torx Flexible Hex Hey Set 46 9-47291 Door Skin Hammer 28 83103 3 Pc. 1/4", 3/8", 1/2" Dr. Slide Rail Socket System 45 9-47292 Light Dinging Spoon 28 83104 Univeral Magnetic Part Tray - Circular 47 9-47293 Toe Dolly 28 83112 3 Pc. 1/4" Drive Socket Rail Clips 45 9-47294 Heel Dolly 28 83113 3 Pc. 3/8" Drive Socket Rail Clips 45 9-47295 General Purpose Dolly 28 83114 3 Pc. 1/2" Drive Socket Rail Clips 45 9-47296 4 Pc. Body Hammer Set 28 83115 Univeral Magnetic Part Tray - Rectangular 47 9-47297 7 Pc. Body Hammer and Dolly Set 28 85098 12 Pc. XL Combination Ratcheting 9-47298 Utility Pick Hammer 28 Wrench Set 37

64 CFT Vo-tech '08-09 4/24/08 2:43 PM Page 65

Your Authorized Craftsman® Distributor and your Instructor work together to ensure you have all the tools you need.

• TECHNICAL EXPERTISE • INDUSTRY KNOWLEDGE • CUSTOMER SERVICE • LOCAL INVENTORY • WARRANTY SERVICE

Authorized Craftsman Industrial Distributors do a lot more than carry tools; they are your value- added partner, providing effective solutions that save you time and money. Call on any of the more than 200 Authorized Craftsman Industrial Distributors conveniently located throughout the United States to service your Craftsman tool and equipment needs.

65 CFT Vo-tech '08-09 4/24/08 2:44 PM Page 66

Craftsman®and Craftsman Professional®are registered trademarks owned by KCD, IP, LLC. GearWrench®,Armstrong®and KD Tools®are registered trademarks of EASCO Hand Tools, a Danaher Tool Group company.

Danaher Tool Group 14600 York Road, Suite A Sparks, MD 21152

Phone: 1.800.688.8949 Fax: 1.800.234.0472 For more information contact your local Craftsman®Authorized Distributor.

Printed in the USA. Copyright © 2008 Danaher Corporation. All rights reserved. 4/08 Item #89081-37