1
Proforma for Affiliation to Haryana State Board of Technical Education Bays 7-12, Sector-4, Panchkula-134112
1. To be filled by Existing Polytechnic Institutions offering diploma engineering program seeking extension of affiliation for 2018-19. 2. Please provide the actual information, if any information found false/incorrect may lead to disaffiliation of the Institute from HSBTE
INSTITUTE CODE: _001__
PART-A: GENERAL INFORMATION
Society / Trust / Company (U/S 25) Name & Address of the Society / Trust / Company (U/S 25 of Companies Act, 1956): NOT APPLICABLE
Complete Postal address:
Society / Trust / Company Registration Number Date of Registration / Place of Registration
Name of the Chairman / President of the Society / Trust / Company
STD code & Telephone No. (LL) Mobile No. Fax No.
Institution Name of the Institution run by the Trust / Society / Company: GOVT. POLYTECHNIC, AMBALA CITY
Complete Postal address: GOVT. POLYTECHNIC, AMBALA CITY
STD code & Telephone No. (LL) 01712443222 Mobile No. Fax No. 01712556008
E-mail [email protected]
Type of the Institute (Write the appropriate Central Government / State Government / University / one) Deemed University / Autonomous / Aided / Private (Enclose copy of Registration documents of Society/Trust) / Any other (Specify)
Signature of the Principal/ Head of the Institution
2
Year of starting of the Institute 1958
Name of the Principal of the Institute P.K. Soni
Qualifications M.Tech
Date of Joining of the Institute 24/04/2015
Contact Nos. (LL with STD Code / 01712443222 Mobile No.) E-mail [email protected]
PART-B: DETAILS OF THE LAND (Attach copy of all the land documents / NOC’s) Mega / Urban Non-Urban Metro Classification of the Permanent Site (Please tick the applicable one & attach Town and Country Planning Dept. documents issued by the competent Development Authority authority) State Revenue Authority
Land (Area in acres) 24.6 Ownership of Land Government Trust Society (Please tick the applicable one) Govt. Leased Owned Company (U/S 25) Resolution of Society for use of ear marked
Land for establishment of Polytechnic No encumbrances certificate (contiguous-in single patch) Town and Country Planning Dept. Change of Land Use Certificate (CLU) (Please Development Authority tick the competent issuing authority & attach documents) Municipal Authority Revenue Authority Town and Country Planning Dept. Khasra Plan / Master Plan (Please tick the competent issuing authority Development Authority & attach documents) Revenue Authority Town and Country Planning Dept. Site Plan Development Authority (Please tick the competent issuing authority & attach documents) Revenue Authority Municipal Authority
Signature of the Principal/ Head of the Institution
3
Total built-up area Building Plan Development Authority (Please tick the competent issuing authority & attach documents) Revenue Authority Municipal Authority Rural area: Tehsildar Occupancy certificate (Please tick the competent issuing authority Urban area: Municipal Corporation / & attach documents) Municipal Committee / HUDA Structural stability certificate issued by Registered Structural Engineer Yes / No (applicable in case where occupancy certificate is more than 30 years old) Access to the site (National Highway/ State Highway/ Village Road/ Kacha Road and YES Permission from competent authority to use NOC from Local Fire Service Authorities (to Applied for ensure fire and life safety measures) Whether Earth leakage circuit breaker (ELCB) provided? Yes / No
Whether Ramp provided for Divyang for easy access to and evacuation from the building? Yes / No (Access is limited to few buildings)
Whether any High tension electric line pass across the premises? Yes / No
PART- C: APPROVAL STATUS OF THE INSTITUTE (for the previous session; attach copy of all the approval/affiliation letters) Approving authority Letter Number Date Annexures
Copy of AICTE approval North-West/1- 10-Apr-2018 Annexure-I letter 3512899064/2018/EOA Copy of PCI approval letter (if applicable) Copy of NCHMCT approval letter (if applicable) Copy of last affiliation letter of HSBTE Copy of NOC of State Government
Signature of the Principal/ Head of the Institution
4
PART-D: ORGANIZATION, GOVERNANCE AND ADMINISTRATION
1. Constitution of BOG with detailed qualification, experience of all the members
NOT APPLICABLE
NOTE: 1. Provide the details of all the members as per Annexure –A 2. At least two meetings shall be held in a year
Is BOG constituted as per AICTE/ PCI / HSBTE Norms. Yes/No
NAME AND ADDRESS OF THE MEMBERS OF THE GOVERNING BODY AS PER THE COMPOSITION PRESCRIBED BY AICTE Present S. Professional Telephone Name Position Qualification E-mail Address No position / Numbers Occupation 01. Chairman Member 02. Secretary 03.
04.
05.
06. Members 07.
08.
09.
10.
11.
Whether Anti-ragging committee (As per All India Council for Technical Education notified regulation for prevention and prohibition of ragging in AICTE approved technical Institutions vide No. 37-3/Legal/AICTE/2009 dated 01.07.2009) constituted, displayed in the campus of the institute and hoisted on the website of institute?
(Yes / No)
Whether Grievance Redressal Committee in the Institute. (As per All India Council for Technical Education (Establishment of Mechanism for Grievance Redressal) Regulations, 2012, F. No. 37-3/Lega112012, dated 25.05.2012) constituted, displayed in the campus of the institute and hoisted on the website of institute?
(Yes / No)
Signature of the Principal/ Head of the Institution
5
Whether Internal Complaint Committee (ICC) (As per section 4 of Sexual Harassment of Women at Workplace (Prevention, Prohibition and Redressal) Act, 2013) constituted, displayed in the campus of the institute and hoisted on the website of institute?
(Yes / No)
Whether Committee for SC/ST (As per the Scheduled Castes and the Scheduled Tribes (prevention of Atrocities) act, 1989, No. 33 of 1989, dated 11.09.1989) constituted, displayed in the campus of the institute and hoisted on the website of institute?
(Yes / No)
PART- E: STAFF STATUS & REQUIREMENT
Norms for Faculty requirements and Recommended Cadre Ratio for Diploma Level Technical Institution (for Diploma Engineering / Pharmacy Courses as per AICTE APH 2018-19)
Faculty : Principal/ Head of the Lecturer Total Student Director Department based on Approved Intake* A B C D=A+B+C Engineering and 1:25 1 1per (S/ 25) – S/25 Technology/ Architecture/ Department (A+B) Planning/ Applied Arts and Crafts, HMCT *Of which, a minimum of 80 % should be Regular/ full time faculty and the remaining shall be Adjunct Faculty/ Resource persons from industry as per Annexure 10. S = Sum of number of students as per “Approved Intake” at all years
Signature of the Principal/ Head of the Institution
6
The faculty details for all the 03 years for the various diploma courses being offered by the institute be elaborated course wise as per the AICTE APH 2018-19 (tabulated above) in the table given below:
NAME OF THE PRINCIPAL
Stamp Size
g g Signature
Photo Pay
Total
& Age &
Degree
Joining
Date of
Number
Aadhaar
obtained
with Classwith
the highest the
ScalePay of
emoluments
Qualification
DateBirth of
startingfrom
Correspondin
Present BasicPresent Specialization
M.Tech
Civil
18(8700 -
B.Tech ENGG. GP)
53240
101656
5/6/1959 3/6/1985 ACPL
PRINCIPAL - EXPERIENCE Teaching Industry Institution Position Years Institution Position Years Tech. Edu. Principal 33 - - - Haryana
TEACHING FACULTY - QUALIFICATION
Name of the Faculty
Qualification with
Member with Stamp Size Class obtained
starting from the
Total & Age &
Photo Present
highest Degree BasicPay
Signature
Number
Aadhaar
emoluments
Designation Department
Scaleof Pay
Date of Birth Date
Date of Date Joining
Specialization Corresponding
Serebdeep Kaur
-
15600
Arch.
H.O.D
1,08,800 1,18,778
46 years
B.Arch. 24.1.1972 24.8.1995
39100+8000(GP)
-
Lect.
91,400 98,090
15600
Arch.
2.1.2004
43 years
B.Arch. 23.11.1975
Harish Gupta 39100+6000(GP)
Signature of the Principal/ Head of the Institution
7
Sunil Rai
-
)
Lect.
99,800
15600
Arch.
5.4.1999 1,05,290
40 years
B.Arch. 28.3.1974
39100+7600(GP
Preyank
-
Lect.
86,600 88,280
15600
Arch.
32 years
B.Arch. 18.12.2004
10.10.1981 39100+7600(GP)
Pardip.K.Mittal
-
S.A
9300
62,200 68,108
Arch.
45 years
B.Arch
22.9.1973 14.2.1997 34800+4000(GP)
Rajesh Kumar
37,600
Arch.
30 years
17.9.2008
19.11.1987
Lab.Inst.
34800+3600(GP)
-
B.tech (Civil) B.tech Diploma(Arch) Diploma(Arch)
9300
S.K. Gupta
-
M. M.
Tech.
I
GP
Auto
37400 Engg.
Mech.
145800
, 55 yrs 55 ,
Sr.Lect.
h
B. B.
67000+ 8700
30.06.1962 15.02.1988 Tec I
Sunil K. Gagat
I
GP
Lect.
69200
34800+ 5400
39 yrs 39
-
B. Tech. B.
Auto Engg.Auto
30.07.2004
10.10.1978, Mech.Engg.
9300
Ravinder Singh
I
M. Tech. M.
GP
Lect.
83600
34800+ 7600
35 yrs 35
-
Auto Engg.Auto
18.12.2004
03.09.1982, Mech.Engg.
I
B. B.
9300 Tech.
Signature of the Principal/ Head of the Institution
8
Raj Kumar
I
Lect.
76200
47 yrs 47
B. Tech. B.
34800 GP6000 +
Auto Engg.Auto
-
06.03.2007
17.08.1970, Mech.Engg.
9300
Navneet Gupta
I
GP
Lect.
71800
35 yrs 35
34800 6000 +
-
B. Tech. B.
Auto Engg.Auto
14.08.2007 26.11.1982,
Mech.Engg. 9300
FU Rehman
67000+ 67000+
-
8700
55yrs
HOD
137,500
Mech.
B.Tech
19/05/1963 24/12/1991 37400
Subhash Chander
39100+ 39100+
-
8000
47yrs
112,100
Mech.
On Adoch Adoch On
B.Tech 03/08/1998 03/08/1998
16/3/1967
to17/12/2004 to17/12/2004 Sr. Lect. Sr. 15600
Ram Niwas
39100+ 39100+
-
6000
44yrs
96,900
Lect.
Mech.
2/8/1974
B.Tech
M.Tech M.Tech 18/12/2004 15600
Bharat Bhushan
39100+ 39100+
-
6000
40yrs
80,900
Lect.
Mech.
2/7/1977
B.Tech
M.Tech M.Tech 27/7/2004
15600
Sanjiv Kumar
39100+ 39100+
-
7600
46yrs
88,700
Lect.
Mech.
B.Tech
M.Tech M.Tech
27/7/2004 5/12/1971
15600
Signature of the Principal/ Head of the Institution
9
Hitesh Chawla
39100+ 39100+
-
6000
36yrs
69,700
Lect.
Mech.
B.Tech
M.Tech M.Tech
6/10/2003 15/12/1981 15600
Ashwani Kumar
39100+ 39100+
-
7600
45yrs
Lect.
102,800
Mech.
6/6/1973 6/1/2004
B.Tech M.Tech M.Tech
15600
Jagjit Singh
Narang
39100+7600
45yrs
91,400
Lect.
-
Mech.
B.Tech
M.Tech M.Tech
21/2/1969 11/5/1992
15600
Aneesh Kumar
39100+ 39100+
-
6000
42yrs
76,200
Lect.
Mech.
8/3/2007
B.Tech
M.Tech M.Tech 25/5/1975
15600
Dev Suman Verma
39100+ 39100+
-
6000
38yrs
76,200
Lect.
Mech.
B.Tech
M.Tech
02/12/2003 06/02/1980
15600
Rajeev Narwal
- -
HOD 31/3/1999
PLASTIC
Plastic Tech Plastic
B.Tech, MBA B.Tech, 09/09/1972 46 yrs
Pankaj Garg
- -
-
91400/ 96470/
B.Tech
Sr.Lect
21/7/1977
30/12/2003
PLASTIC Plastic Tech Plastic
21/7/1977 41yrs
Signature of the Principal/ Head of the Institution
10
Shiv Kumar
-
-
-
Lect.
96900/
102245/
08/04/1999
PLASTIC
Plastic Tech Plastic MBA, B.Tech MBA, 02/03/1967 51yrs
Sunil Kumar
- -
-
Tech
Lect.
83600/ 88280/
17/12/04
PLASTIC
B.EMech.
DiplomaIn
Plastic Tech Plastic
Post graduate graduate Post 29/04/1979 39yrs Engg. Plastic &
Ajay Kumar
- -
PE
-
-
Lect.
76200/ 80510/
PGD
28/02/2007
PLASTIC Plastic Tech Plastic
B.E.Chemical 22/12/1982 36yrs
Virender Nehra
- -
-
W/I
47600/ 50480/
20/1/2007
PLASTIC
Diplomain
Plastic Tech Plastic Plastic Tech. Plastic
1/5/1977 42yrs
Munish Gupta
I
-
1997
13
-
-
I
1972 (451972
-
NIL
03
CSE PB
-
years)
122100 135574
HOD
ME ME
06
03
-
16
I
–
I BE BE
Krishan Singh
1971
1998
12
- -
-
I
cse
NIL
09
07
99800
PB
-
-
107330
B.tech
(46 years)
07
Lecturer 07
Signature of the Principal/ Head of the Institution
11
Ajay Singh
1977
2004
12
-
-
-
I
NIL
01
06
91400 96470
CSE PB
-
-
(40 years) 16
Lecturer
28
M.Phil.(CSc) M.Phil.(CSc)
I MCA
Dr. Surender
Kumar
2004
12
-
-
I
1974 (431974
-
NIL
01
91400 98230
CSE PB
-
Years)
12
08
-
MCA, PhD MCA, 05 Programmer
Anil Kumar
6
1987
2008
-
-
-
I
NIL
09
PB
05
36500 37730
CSE
-
-
16
(27 Years)
10
LabInstr. DIPLOMA
Amrita Saini
2007
11
-
-
I
1983 (351983
-
NIL
03
76200 80510
CSE PB
-
Years)
05
07
-
Lecturer M.TECH
19
Dharamvir Saini
-
1976
10
-
-
I
01.2012
NIL
10
61500
-
CSE PB
-
41 Yrs 65075/
MCA
17
Lecturer 07
Signature of the Principal/ Head of the Institution
12
TEACHING FACULTY - EXPERIENCE Teaching Industry Name of the S.No faculty Member Institution Position Years Institution Position Years
1. Serebdeep Kaur HOD 23 G.P.Ambala NIL NIL NIL (Arch)
2. Harish Gupta Lecturer Private Arch. G.P.Ambala 14 Architect 4 Arch firm 3. Sunil Rai Lecturer Private Arch. G.P.Ambala 19 Architect 2 Arch firm 4. Preyank Shori Lecturer G.P.Ambala 13 NIL NIL NIL Arch
5. S.K. Gupta G.P. Ambala Sr. Lect. 30 ------
6. S. K. Gagat G.P. Ambala Lect. 15 ------
7. Ravinder Singh G.P. Ambala Lect. 13 ------
8. Raj Kumar G.P. Ambala Lect. 23 ------
9. Navneet Gupta G.P. Ambala Lect. 9 ------
10. FU Rehman G.P. AMBALA HOD 26 NIL NIL NIL
Subhash Chander G.P. AMBALA 11. Sr. Lect. 22 Merchant Navy Marine Engineer 4
Ram Niwas G.P. AMBALA 12. Lect. 20 NIL NIL NIL
13. Bharat Bhushan G.P. AMBALA M/S Micro 01 Instrument co., Assistant Engg. Lect. 13.5 Ambala Cantt, Assistant M/S Nahar Fabrics Engg. 02 Lalru Punjab Sanjiv Kumar G.P. AMBALA 14. Lect. 13 NIL NIL NIL
Hitesh Chawla G.P. AMBALA 15. Lect. 15 NIL NIL NIL
Ashwani Kumar G.P. AMBALA AE 16. Adhoc M/S ohshna Cables 1 .5 5yr 6 Pvt. Ltd Lect. months Chandnpur Work AE Regular Pvt. Ltd. 14 yrs
Signature of the Principal/ Head of the Institution
13
17. Jagjit Narang G.P. AMBALA M/S Arsun system Lect. 26 Programmer 3 Pvt. Ltd. 18. Aneesh Kumar G.P. AMBALA M/S MOSER BAER Assistant Lect. 11 INDIA LTD. GR. 7 NOIDA Manager Dev Suman G.P. AMBALA 19. Lect. 15 NIL NIL NIL
20. Munish Gupta KCGPW Lect. 8 NIL
KCGPW Sr. Lect. 6 NIL
GPA HOD 9 NIL
21. Krishan Singh G.P.Jhajjar Lect. 5.4 NIL
CDL.G.P.Nathu NIL Lect. 3.7 Sari Chopta
G P Adampur Lect 2.5 NIL
G P A/city lect 7.9 NIL
22. Ajay Singh KCGPW Lect. 3.5 NIL
G.P.Nilok. Lect. 2.5 NIL
GP A/City Lect 8.0 NIL
23. Dr. Surender GP A/City Progm. 14 NIL Kumar 24. Amrita Saini G.P.Nlk Lect. 6.3 NIL
G.P.A/City Lect. 4.5 NIL
25. Dharamvir Saini Tech Edu Hry Lect. 2 NIL - -
G.P.A/City Lect. 4 NIL
TEACHING FACULTY - EXPERIENCE
Teaching Industry Name of the S.No Year faculty Member Institution Position Years Institution Position s 26. H.O.D Rajiv Sapra G.P Ambala 23 _ _ _ ECE
Signature of the Principal/ Head of the Institution
14
27. Inderjeet Singh Lecturer G.P Ambala 13 _ _ _ Dhindsa ECE 28. Deepender Lecturer G.P Ambala 10 _ _ _ Singh Gill ECE 29. Ravinder Lecturer G.P Ambala 10 _ _ _ Kumar ECE 30. Ravinder Singh Lecturer G.P Ambala 10 C.M.C Ltd. C.S.E 05 Punia ECE 31. Sandeep Goel Lecturer G.P Ambala 07 _ _ _ ECE 32. Lecturer Suchet Kumari G.P Ambala 09 _ _ _ ECE 33. Rakesh G.P Ambala W/I ECE 21.5 _ _ _ Manchanda 34. Dalwinder G.P Ambala W/I ECE 07 _ _ _ Singh 35. Rajnish Garg Tech. Edu. Sr. Lect 26 - - - Haryana 36. Madan Garg Tech. Edu. Lect. 26 Haryana 37. Satpal Singh Tech. Edu. Lect 28 Haryana 38. Kavi Raj Tech. Edu. Lect 5 Haryana 39. Neeraj Kumar Tech. Edu. Lect 20 Haryana 40. Shish Pal Tech. Edu. Lect 5 Haryana 41. Rajiv Kumar Tech. Edu. Verma Lect 23 Haryana 42. Rajinder Singh Tech. Edu. Rana Sr. Lect 20 - - - Haryana
Signature of the Principal/ Head of the Institution
15
43. Pushpendra Tech. Edu. Pratap Lect 13 Haryana 44. Archana Tech. Edu. Sharma Lect 14 Haryana 45. Sunita Rani Tech. Edu. Lect 14 Haryana 46. Sarita Mann Tech. Edu. Lect 11 Haryana 47. Preet Pal Kaur Tech. Edu. Lect 5 Haryana 48. FU Rehman Tech. Edu. Sr. Lect 22 Haryana 49. Subhash Tech. Edu. Chander Lect 18 Haryana 50. Ram Niwas Tech. Edu. Lect 9 Haryana Govt. Poly., Lecturer 03 Years Jhajjar Govt. Poly., Lecturer 03 Years Hissar Govt. Poly., Lecturer 03 Years Sirsa Govt. Poly., 57 Sh. N.K.Goel Sr. Lecturer 01 Years Sirsa Govt. Poly. Lecturer 11 Years Ambala Govt. Poly. Sr. Lecturer 04 Years Ambala Govt. Poly. H.O.D. 02 Years Ambala 02 Years Govt. Poly. Lecturer 09 Sirsa Months Govt. Poly. Lecturer 05 Years 58 Sh. R.L.Saini Ambala Govt. Poly. 06 Lecturer Nilokheri Months Govt. Poly. 07 Years Lecturer Ambala 03 Month
Signature of the Principal/ Head of the Institution
16
05 Years Govt. Poly. Sr. Lecturer 06 Ambala Months Govt. Poly. 03 H.O.D. Sirsa Months Govt. Poly. 01 Year 06 Sr. Lecturer Ambala Months Design 01 Year 10 Ind. Engg/ Govt. Poly. Months Castles Lecturer Quality 05 Years Ambala upto 31- India Ltd., Control 03-2014 Rajpura 59 Sh. Praveen Kumar Engineer Govt. Poly. 10 Lecturer Nilokheri Months Govt. Poly. Lecturer 15 Days Sonepat Govt. Poly. W.I 04 Years Ambala Govt. Poly. 60 Mrs. Rajni Mehra Lecturer 07 Years Ambala CCET, Lecturer 05 Years Chandigarh Govt. Poly. Lecturer 07 Years Ambala 61 Sh. Surender Malik
H.E.C. Lecturer 05 Years Jagadhari M.M.U. Mrs. Monika Lecturer 01 Years 62 Mullana Aggarwal Chitkara Lecturer 01 Years Govt. Poly. Lecturer 07 Years Ambala S.J.P. Damla Lecturer 01 Years YNR. Govt. Poly. 63 Mrs. Poonam Saini Lecturer 07 Years Ambala
01 & Half JMIT, Radaur Lecturer Years SDDIET, HOD+Lecture 09 64 Mrs. Sarika Sharma Barwala r Months Govt. Poly. Lecturer 05 Years Ambala
Signature of the Principal/ Head of the Institution
17
Govt. Poly. L.I 05 Years Ambala 65 Sh. Parmod Kumar
LIBRARIAN AND PHYSICAL EDUCATION DIRECTOR : NOT APPLICABLE
Name with of of Signatu Stamp Size
Pay re
Total
& Age &
Degree Joining
Photo Date
Number
Aadhaar
Previous
obtained
with Classwith
Experience
the highest the
Designation
ScalePay of
emoluments
Qualification
DateBirth of
startingfrom Present BasicPresent
Librarian
Director Physical
Education
e. WORKSHOP AND TECHNICAL SUPPORTING STAFF
S.
Name of the Staff Pay
No Age
Total
Previous
Signature
Experience
Laboratory
Designation
Department Scale of Pay emoluments
Qualification
Present Basic
Date Joiningof Date of & Birth
Pardeep Mittal Arch. Stud B.A 17
io rch.
1. Asst -
. 42000
22.09.1972 41 years 14.2.1997 9300 34800+330 0 19750 Rajesh Kumar Arch. Lab Dipl 7
Inst. oma
in
2. Arc
h.
17.7.2013 7500 22575
Signature of the Principal/ Head of the Institution
18
3. Rohtas Kumar
yrs
W/I
37400+GP 3600
Auto.
15380 30000
-
20 yrs.
B.Tech.
Autoshop
22.01.2007
02.11.1967,46
9300
4. Balwinder Singh
F/I
hop
.T.I.
works
I.T.I,C
- -
02 10
- -
Harish Khanna 25
1965 1994
CNC
Mech.
01 10
Diploma
workshop F/I
1994
1966
-
-
5. Baltar Singh 24
06
Mech
063
-
-
Diploma
Ad. Fitting
08
23
workshop F/I
- -
03 07
- -
6. Shiv Charan 20
1966 1994
14 06
Painting
I.T.I,C.T.I
workshop F/I
- -
11 06
- -
7. Ramesh Saini 20
W/I
1964 1994
24 23
I.T.I,C.T.I
workshop
- -
04 06
- -
8. Deep Chand 20
1970 1994
Mech
13 23
Diplo ma
eetMetar
Samity/Sh
workshop W/I
- -
03 06
- -
9. Sushil Kumar 20
1971 1994
Shop
Mech
20 27
Machine Diploma
workshop W/I
1965 1998
- -
10. Mehma Singh 20
01 05
Fitting - -
03 13
workshop W/I I.T.I
- -
04 05
- -
11. Balkar Singh 20
1969 1998
06 18
Turning
workshop W/I I.T.I
- -
Amir Chand
10 12
- -
12. 23
1995
Bhatia 1971
12 19
Pattern
Making
workshop W/I I.T.I
Signature of the Principal/ Head of the Institution
19
- -
Narinder Kumar
04 05
- -
13. 15
1998
Rathor 1968
01 13
Carpentry
workshop W/I I.T.I
- -
06 01
- -
14. Lakhwinder Singh 10
W/I
1974 2007
Shop
17 31
Grinding
I.T.I,C.T.I
W/I
- -
03 01
- -
15. Jasmer Singh 10
1976 2007
Shop
06 26
Wiring
Diplom
workshop
I.T.I,C.T.I
W/I
- -
04 02
- -
16. Harmeet Singh 25
W/I
1968 2007
Shop
Govt.
Mech.
11 01
Diploma
workshop
- -
09 02
5 -
17. Vikas Kumar -
W/I
1979 2007
I.T.I.,
C.T.I.
30 22
Welding
Advance workshop
MINISTERIAL STAFF
S. Name of Joining Pay
No the Staff Total
Work
&Age
Number
Aadhaar
Place of Place
Previous Previous
Signature
Experience
Designation
emoluments
Scale of Pay Scale
Qualification Qualification Birth of Date
Present Basic Basic Present
Date of
- -
Yashoda 11
-
1
Rani
62200/ 68151/
ACPL
29 years 29
Dy. Supdt.
B.A/Steno
353862958945
16.08.62/55 year 16.08.62/55
27.03.1989
- -
11 -
4 Kulbir Singh
B.A
Asstt.
2.7.71/
46 46 year
56900/ 60245/
ACPL
25 years 25
GP Ambala GP
709739598596
24.03.1993
- -
6
5 Anita Rani -
10th
FPL
Asstt.
51 51 year
43600/ 46280/
15.3.67/
25 years 25
697052210897 02.12.1992
Signature of the Principal/ Head of the Institution
20
- -
Shalini 6
6 -
Bhatnagar 10th
FPL
Asstt.
54 54 year
44900/ 47645/
28.8.63/
29 years 29
441196782550
16.02.1989
- -
6
7 Raj Kumari -
10th
FPL
Asstt.
53 53 year
44900/ 49224/
15.10.64/
24 years 24
751755958107
01.04.1993
- -
4
8 -
Bimla Devi
10th
Clerk 5.5.64/
51 year
31400/ 34652/
ACPL
14 year 14
361039992044
01.10.2003
- -
4 -
9 Pushpa Vati
10th
Clerk
58 58 year
31400/ 33470/
16.8.60/
ACPL
14 year 14
311465916025
01.10.2003
- -
6
-
10 Bharti
B.A
Clerk
40 40 year
39600/ 42080/
21.7.77/
ACPL
20 years 20
893974574635
19.06.1997
- - 11
Takdir Singh
6
10th Clerk
-
40800/ 47645/
31 years 31
390759291784
15.3.63/51 year 15.3.63/51
27.05.1983 APCL
- -
12 Sunita
JSS
/Steno
31400/ 33470/
th
10 year 10
01.10.2003
10
721204089633
4
04.04.67/46 year 04.04.67/46
-
FPL
- -
13 Sunita
58600/ 64181/
10
-
BA/MA BA/MA 13.11.1997
GFC GFC Lect.
645101605186
(Economics)
08.09.1971/46 years 08.09.1971/46 ACPL
Signature of the Principal/ Head of the Institution
21
PART F: INFRASTRUCTURAL FACILITIES
Norms for Land requirement and built-up area for Diploma Level Technical Institution (for Diploma Courses as per AICTE APH 2018-19) PHYSICAL INFRASTRUCTURE - COMPLETE DETAILS OF BUILT-UP AREA
FIRST YEAR , SECOND YEAR & THIRD YEAR Required Shortfall, if any S. Built-up (Carpet) Type of Area Available Area No Area Structure [sq.m] as [sq.m] [RCC/ACC] per AICTE (a) Instructional area [INA] Administrative area (b) [ADA] ANNEXURE - II (c) Amenities area [AMA] (d) Circulation area [CIA] [CIA = 0.25 x TOTAL AREA :
(INA+ADA+AMA)]
ADMINISTRATIVE AREA REQUIREMENT FOR DIPLOMA COURSES Particulars Number of Minimum Carpet Area Shortfall rooms Carpet Area available w.r.t. required required Number of Room & Carpet Area Principal / Director room 01 30 sqm Board room 01 20 sqm Office all inclusive 01 Campus 150 sqm having one program Campus 300 sqm having more than one program Department offices 01/Deptt. 20 sqm Cabins for HOD’s 01 10 sqm Faculty rooms - 30 sqm (subject to minimum 5 sqm for each faculty member) Central stores 01 30 sqm Maintenance Room 01 10 sqm Security Room 01 10 sqm Housekeeping Room 01 10 sqm Pantry for staff (Desirable) 01 10 sqm Examination control office 01 40 sqm (Confidential Room) Placement office 01 50 sqm
Signature of the Principal/ Head of the Institution
22
IMPORTANT INFRASTRUCTURE REQUIREMENT FOR DIPLOMA COURSES Particulars Number of Minimum Carpet Area Shortfall rooms Carpet Area available w.r.t. required required Number of Rooms & Carpet Area Computer Centre 01 150 sqm Each Deptt. Has its own Coputer Lab of size 89 Sqm (approx) Library and Reading Room 01 400 sqm
Seminar Hall 01 132 sqm
Smart class room 01 66 sqm 185 Sqm
Language laboratory 01 132 sqm NO
INFRASTRUCTURE REQUIREMENT FOR DIPLOMA COURSES IN ENGG. Particulars Number of Number of Minimum Carpet Shortfall rooms rooms Carpet Area Area w.r.t. required available required available Number of Rooms & Carpet Area I II III IV V Lecture Rooms Number of 66 sqm each divisions of room engg. course X duration of course Tutorial Rooms Lecture 33 sqm each rooms / 04 room Total no. of Labs for 05 / course 66 sqm each (Diploma Engg. Courses lab Laboratories for the 1st year includes Physics and Chemistry Laboratory each of 66 sqm are required) Workshop for all 01 200 sqm courses Additional Workshop 02 / course 200 sqm (for category “X” (Maximum courses) 04) Category X of Courses: Mechanical, Production, Civil, Electrical, Chemical, Textile, Marine, Aeronautical and allied Courses of each. Drawing Hall 01 132 sqm
Signature of the Principal/ Head of the Institution
23
BASIC AMENITIES FOR DIPLOMA COURSES Toilets (Ladies & Gents) 01 150 sqm (Campus having one program) 350 sqm (Campus having more than one program) Toilets for Divyang 01 --- Girls Common Room 01 75 sqm Boys Common Room 01 75 sqm Canteen/cafeteria (Desirable) 01 150 sqm First aid-cum-sick room 01 10 sqm Drinking water facility (water Adequate nos. -- cooler) essential (with attached water purifiers) Principal’s Quarters Desired 150 sqm Guest House Desired 30 sqm Sports Club / Gymnasium / Desired 200 sqm Playground Desired 400 sqm Auditorium / Amphi Theater Desired Adequate Boys Hostel Desired Adequate Girls Hostel
COMPUTERS, SOFTWARE, INTERNET AND PRINTERS Program Number of Legal Legal LAN and Mail Printers PCs/ System Application Internet Server and including Laptops to Software n Software Client Color students Printer (% ratio of (Min 20 total PCs) number of PCs/ Laptops) Engineering/ 151 02 07 Yes Yes 19 Technology
NOTE: 1. At least 4Mbps Wi-Fi connectivity at 4 or 5 hotspots shall be made available. 2. Library, Administrative offices and Faculty members shall be provided with exclusive computing facilities along with LAN and Internet. This shall be considered as over and above the requirement meant for PCs to student’s ratio. 3. Every department shall have separate computer Laboratory with at least 20 computers. A centralized computer Laboratory with at least 100 computers.
Signature of the Principal/ Head of the Institution
24
BOOKS, JOURNALS AND LIBRARY FACILITIES Program Total Titles Volumes National Reading Multimedia number of Journals Room PCs for Divisions seating Digital Library/ internet Surfing located in reading room
Number Percentage of total students Engineering 10 6033 63420 8 and 25 per* 125 320 1 % (Max 10) Technology Course per*Course
NOTE: 1. B=Number of divisions at 1st year (Shift 1+2) + Number of 2nd year direct divisions (Shift 1+2) 2. #Book titles and volumes required at the time of starting new Institution. 3. Total numbers of titles and volumes shall be increased in continuation till 15 years, which shall be the minimum stock of books. However, Institutions shall have to add annual increment of books as specified in Approval Process Handbook 2018-19. 4. *Annual increment. 5. Digital Library facility with multimedia facility is essential. 6. Reprographic facility in the library is essential. 7. Document scanning facility in the library is essential. 8. Library books/ non books classification as per standard classification methods is essential. 9. Availability of NPTEL facility at the library is essential.
ESSENTIAL AND DESIRABLE REQUIREMENTS AS PER AICTE APH 2018-19 Sr. Description Availability Details to be No [YES / NO] provided. [Number, if so required] Essential Requirements 1. Standalone Language Laboratory NO
2. Potable Water supply and outlets for drinking water at YES strategic locations 3. Electric supply YES
4. Sewage Disposal system YES
5. Telephone YES
6. Vehicle parking YES
Signature of the Principal/ Head of the Institution
25
7. Display of information submitted to AICTE (including the YES accreditation status and Board of Governors) along with mandatory disclosures in the Web site of the Institution. 8. Copies of AICTE approvals (LoA and EoA of subsequent YES years) obtained since inception of the Institution till date shall be placed in the web site of the Institution 9. Digital payment for all financial transactions as per MHRD YES directives 10. Provision to watch MOOCS courses through Swayam YES
11. Display board within the premises as well as in the web YES site of the of Institution indicating the Chairman / President of the Trust of the institute, faculty available, facilities offered / available at the institute and feedback facility of students 12. Implementation of Unnat Bharat Abhiyan NO
13. Barrier Free Built Environment for disabled and elderly YES persons including availability of specially designed toilets for ladies and gents separately (as per Chapter V of Approval Process Handbook 2018-19). 14. Safety and Security measures in the Campus (as per YES Chapter V of Approval Process Handbook 2018-19 and Safety Guidelines issued by Department of Technical Education, Haryana) 15. Safety provisions including fire and other calamities (Refer YES Annexures 8 and 9 of Approval Process Handbook 2018- 19) 16. Implementing Food Safety and Standards Act, 2006 in the YES Institution 17. General Insurance provided for assets against fire, NO burglary and other calamities 18. All weather approach road suitable for use by Motor YES vehicle- Motorized Road 19. General Notice Board and Departmental Notice Boards YES
20. First aid, Medical and Counseling Facilities YES
21. Appointment of Student Counselor YES
22. Group Insurance to be provided for the employees YES
23. Insurance for students NO
24. Institution -Industry Cell YES
25. Placement Cell YES
26. Applied for membership of National Digital Library YES 27. Strong Room [Storing QPs & ASs] YES
Signature of the Principal/ Head of the Institution
26
28. Security arrangement [Day / Night] YES
29. Sufficient halls for Examination YES
Desirable Requirements 30. Implementation of the schemes announced by MHRD YES
31. Offering of Skill development Courses approved by the YES Council 32. Participation in the National Institutional Ranking NO Framework (NIRF) 33. Fabrication facility Laboratory (FABLAB)/ Tinkering ? Laboratory/ Innovation Laboratory 34. Backup Electric Supply YES
35. Availability of at least ONE Smart Classroom per YES Department 36. Rain Water Harvesting and installation of grid connected YES solar rooftops/ Power Systems 37. Waste management and environment improvement YES measures to ensure a sustainable Green Campus 38. Public announcement system at strategic locations for NO general announcements/ paging and announcements in emergency. 39. Enterprise Resource Planning (ERP) Software for Student- YES Institution-Parent interaction 40. Transport NO
41. Post, Banking Facility/ ATM YES
42. CCTV Security System YES
43. LCD (or similar) projectors in classrooms YES
44. Staff Quarters YES
45. Display of Courses and “Approved Intake” in the YES Institution at the entrance of the Institution. Courses taken through duly recognized MOOCs shall be used as Supplementary Courses. 46. Implementation of Unnat Bharat Abhiyan/ Saansad NO Adarsh Gram Yojana (SAGY) 47. Implementation of Startup Policy NO
48. Intellectual Property Right Cell NO
49. Availability of quality sanitary napkins through sanitary YES napkin vending machines and ensuring safe and environment friendly disposal of used sanitary napkin through sanitary napkin incinerator
Signature of the Principal/ Head of the Institution
27
PART G – DETAILS OF MACHINERY/ EQUIPMENT
Architectural Assistantship
Sr. Name of Name of Major/Esse No. of No Working Remarks No. Laborator Teacher ntial Required Available Condition y Equipment required for conduct of Practical 1. Comp. Lab Sh. Sunil Rai Computer 15 10 8 Systems 2. Comp. Lab Sh. Sunil Rai Plotter 1 1 1
AUTOMOBILE ENGG.
Sr. Name of Name of Major/Essential No. No. Working Remarks No. Laboratory Teacher Equipment required for Required Available Condition conduct of Practical Automobile SUSHIL General Tools 10 10 10 Workshop KUMAR Special Tools And Gauges 1 1 1 GUPTA / Layout Of Chassis 1 1 1 ROTASH Components In Layout Of Chassis 1 1 1 NEHRA Tyre Pressure Gauge 1 1 1 Puncture Kit 1 1 1 Two Wheelers 1 1 1 Radiators And Fan Belts Engine 1 1 1 AUTO RAVINDE Fuel Injection Pump 1 1 1 ENGINES – II R SINGH Fuel Injector 1 1 1 Altenator 1 1 1 Starter Motor Growler 1 1 1 Calibration Machines (Fip) 1 1 1 Exhaust Gas Analyser 1 0 0 Smoke Meter Crdi Engine 1 1 1 Engine Valves And Valves 1 1 1 Machenisum Mock Up Wiring Board 1 1 1 Head Light 1 1 1 Horn, Relay, Dipper Switch, 1 1 1 Indicator Circuits Coil Spring Type Suspension 1 1 1 Leaf Spring Type Suspension 1 1 1 CHASSIS, Shock Absorber 1 1 1 BODY AND VIJAY Tyre Changer 1 1 1 TANSMISSI SINGH Mechanical Brakes 1 1 1 ON - II Drum Brake Assembly 1 1 1 Hydraulic Brakes, Disc Brakes 1 1 1 Wheel Balancing Machine 1 1 1
Signature of the Principal/ Head of the Institution
28
Body Repair Kit 1 1 1 DRIVING GURMEET Maruti 1 1 1 PRACTICE SINGH Van
CIVIL ENGG
Sr Name of Name of Major/Essential Equipment required No. of No Working Remarks No Laboratory Teacher for conduct of Practical Required Available Condition
1 Model of culvert 01 01 01 1 BC Lab Sh. VINOD MISHRA 2 Model of Flying Shore 01 01 01 3 Model f Raking Shore 01 01 01
4 Model of Pile with shoe 01 01 01 5 Model of king post-tros 01 01 01 Model of braced & ledged 01 01 01 6 door model of syphon 01 01 01 7 aqueduct 8 Model of aqueduct 01 01 01 9 Model of fish ladder 01 01 01 10 Model of Partition wall 01 01 01 11 Model of open well stair 01 01 01 12 Model of ventilated door 01 01 01
13 Model of Bifurcated stair 01 01 01
14 Model of roof 01 01 01 15 Model of canal drop 01 01 01 Model of Model of Brick 01 01 01 16 layer scal folding 17 Model of gravits dam 01 01 01 18 Model of super passage 01 01 01 Model of stone Arch 01 01 01 19 bridge 20 Model of double built Arch 01 01 01
21 Model of skew Arch 01 01 01 22 Model of single laid Arch 01 01 01 23 Model of relieving Arch 01 01 01 24 Model of double built Arch 01 01 01 Sr Name of Name of Major/Essential Equipment No. of No Available Working Remarks No Laboratory Teacher required for conduct of Practical Required Condition
Signature of the Principal/ Head of the Institution
29
2 CM Lab Sh. VINOD 1 Aluminium pot with cover 01 01 01 MISHRA Barangers balance 2 without weight 01 01 01 3 Brass stove 01 01 01
4 cleaning brush 02 02 02 5 cleaning wire brush 02 02 02 collection of coal 15 piece
6 1 set 01 01 01 7 cube mould size 2.78 04 04 04
8 digital weighing balance 01 01 01
9 Enamel tray 01 01 01
10 Glass thermometer 02 02 02 11 Grinding machine 01 01 01 12 Iron ball for Impact test 01 01 01 13 Le-Chattelier Apparatus 01 01 01 14 Masonary Errection Tool 10 10 10 Measuring jar 1000ml &
15 500 ml 02 02 02 Plastic measuring cylinder
16 1000, 500, 100ml 03 03 03 17 Plier 6'' 01 01 01
18 Scoop steel 7'' length 02 02 02 set of 9 Nos weight 10gm 19 to 500gm 01 01 01 Standard collection of
20 mineral 01 01 01 Standard collection of 21 Rock in card board care 01 01 01 22 Steel foot role 02 02 02 23 Stone sample 02 02 02 24 Wooden Sample 02 02 02 Temp. Starmake elecric
25 oven 01 01 01
26 Test Sieve brass 20 dia 02 02 02 27 Tri. Square 1'X2' 02 02 02 28 Trowel 5½ X 4¼ 01 01 01 29 Trowel 4''X2¼ 02 02 02 30 Vibrating Machine 01 01 01
Signature of the Principal/ Head of the Institution
30
31 Vicat needle Apparatus 01 01 01
32 Vicale needle Appartus 01 01 01 33 Water tub (Iron) 01 01 01 Sr Name of Name of Major/Essential Equipment No. of No Available Working Remarks No Laboratory Teacher required for conduct of Practical Required Condition
1 Bar bending cutter 01 01 01 3 CT Lab Smt. Jasveer 2 Barnger Balance 1 kg 02 02 02 Kaur 3 Barnger Balance 5kg 02 02 02 4 Beam balance 20 kg 01 01 01
5 Beam mould 15X15X70cm 02 02 02 6 Brass stove 01 01 01
7 Brignette Mould 01 01 01
8 Brignette Mould 17 17 17 9 Brignette Mould 12 12 12 10 Brush (Iron) 08 08 08 11 Brush Sieve Cleaning 08 08 08 cement Brienette testing 01 01 01 12 machine 13 cement concrete mixture 01 01 01 14 compaction factor App 01 01 01 compression testing 01 01 01 15 (Hydraulic) 16 cube mould 6 '' 03 03 03 17 cube mould 4'' 05 05 05 18 cylinder Iron '6*12' 03 03 03 cylender Mould 6'' dia 12'' 03 03 03 19 h with lid cylender Mould 6'' dia 12'' 03 03 03 20 h without lid Cylender Sheet Iron 12 02 02 02 21 dia 12h Digital weighting balance 01 01 01 22 15 kg capacity 23 Electric Oven 01 01 01 24 Enamel Tray 03 03 03 25 Flakiness Index Gauge 02 02 02
26 Flakiness Index Gauge 02 02 02 27 Gaugeing Trawel 514 02 02 02
Signature of the Principal/ Head of the Institution
31
28 Hot Plate 200 W X 18'' dia 02 02 02
29 Iron Sheet 8' X 4' X 1/8'' 01 01 01 30 Le-chataliee Flask 01 01 01 31 Le-chatalier Mould 03 03 03 32 Length Gauge 02 02 02 33 Length Gauge 02 02 02
34 Liquid Limit Device 05 05 05 35 Measuring steel rule 05 05 05 36 Needle Vibrater 01 01 01 37 Pen Thermometer 01 01 01 Portable plateform where 01 01 01 38 capacity 500 kg (30''X30'') 39 Proctor mould 02 02 02 40 Rammers 04 04 04 41 Rebound Hammer 01 01 01 42 Refiller 05 05 05 43 Riffle Sampler 02 02 02 44 Scoop steel 03 03 03 45 Sieve shaker 01 01 01 46 Slump test App. 03 03 03 47 Slump test App. 02 02 02 48 split spin sample 01 01 01 49 Test sieve brass set 01 01 01 50 Steel hot plate 4'X4'X2mm 01 01 01 51 taslas 01 01 01 52 test sieve brass set 01 01 01 53 Test sieve Aluminium set 01 01 01 54 Trawel 03 03 03 55 Vibrating table 01 01 01 56 Vicat needle App. 01 01 01 57 Vicat needle App. 01 01 01 58 Vicat needle App. 02 02 02 Sr Name of Name of Major/Essential Equipment No. of No Available Working Remarks No Laboratory Teacher required for conduct of Practical Required Condition 1 Liquid limit device 04 04 04 4 SFE Lab Sh. Satpal 2 Barranger balance 10kg 01 01 01 Singh 3 Beam mould 02 02 02 Bulk density Appratus 01 01 01 4 (Sand replacement) 5 Bulk density (core cutter) 01 01 01 Compression testing 01 01 01 6 machine 7 Concrete cube mould 04 04 04 8 Dynamic cone 01 01 01 Consolidation test 01 01 01 9 appratus
Signature of the Principal/ Head of the Institution
32
Consalidation test 01 01 01 10 appratus DBD Appartus (Dry Bulk 01 01 01 11 Denisity) 12 Direct shear appratus 01 01 01 13 Electronic balance 01 01 01 Electronic Direct Shear 01 01 01 14 test 15 Motor used LL App. 01 01 01 16 Permeability App 01 01 01 17 Post hole Auger 02 02 02
18 Proctor Needle App. 01 01 01
19 S.P.T App 01 01 01 20 Sampling tubes extractors 01 01 01 01 01 01 21 Sieve Shaker 01 01 01 Sieve Set of size 80mm to 1 set 11 1 set 11 1 set 11 22 4.75mm nos nos nos 23 Triaxial testing Machine 01 01 01 24 Cone with case hardening 01 01 01 25 Sieve brass 90 Micron 02 02 02
26 Table Pan balance 01 01 01 1 srt 1 srt 17 1 srt 17 Sieve set of 80mm to 75µ 27 17 nos nos nos Sr Name of Name of Major/Essential Equipment No. of No Available Working Remarks No Laboratory Teacher required for conduct of Practical Required Condition 5 CACE Lab Sh. Computer system, Dell Shishpal optiplex Intel core I5 processor, 4GB RAM, 500 08 08 08 GB HDD, DVD R/W, optical mouse, keyboard 1 18.5'' LED, window 7 5KVA online UPS system with 16x65 AH battery & 01 01 01 2 rack 3 HPLJ1536 DNF Printer 01 01 01 Sr Name of Name of Major/Essential Equipment No. of No Available Working Remarks No Laboratory Teacher required for conduct of Practical Required Condition 6 FM Lab Sh. Kaviraj Ultra sonic Pulse Velocity 01 01 01 1 Appartus 2 Cut section Model 01 01 01
3 Force of Jet Apparatas 01 01 01
Hydranlic Bench fitted fitted 01 01 01 4 with U-tube complete set 5 Vernier Calliper 01 01 01
6 Lettering set 02 02 02
7 Pipe wrench, pliers 07 07 07
Signature of the Principal/ Head of the Institution
33
Model-Reciprocating, Model
water pump & Hydraulic 03 03 03 8 ram 9 A) Screw wrench, , 01 01 01
10 B) spanner screw 10 10 10
11 C) screw driver 02 02 02 Sr Name of Name of Major/Essential Equipment No. of No Available Working Remarks No Laboratory Teacher required for conduct of Practical Required Condition 7 HE Lab Sh. Birender Aggregate Impact value 01 01 01 Pal Singh 1 machine 2 Biturmen penometer 01 01 01
3 Biturmen thermometer 01 01 01
4 Density Baskeet 02 02 02
5 Deculity testing M/C 01 01 01
Flash point & flash point 01 01 01 6 Appartas 7 Hot plate with regulator 01 01 01
8 Pentration value Appartas 01 01 01
9 Ring & Ball Appartas 01 01 01
10 Loss Angle Abression M/C 01 01 01
11 Ring Ball Appartas 02 02 02
Signature of the Principal/ Head of the Institution
34
Sr Name of Name of Major/Essential Equipment No. of No Available Working Remarks No Laboratory Teacher required for conduct of Practical Required Condition 8 WSWWE Sh. Birender Aqua Guard Filter &
Lab Pal Singh Purificator (Dimension 01 01 01 360X100X300mm Gross 1 Weight 6kg Aqua online water 01 01 01 2 Purificator B.O.D. Incubator Capacity
6.0 Cubic 01 01 01 3 ft(450X450X600mm) B.S.W. Die set
(size1/4'',5/6'',3/8'', 7/16'', 01 01 01 1/2'',5/8'',3/4'',7/8'',1'',1¼'', 4 1½'' Bacterological Incubator
Chamber size 01 01 01 4000x380X700mm double 5 door, temp. 30 to 70ºC
6 Ball Pane Hammer 02 02 02 7 Blow Lamp 01 01 01 8 Chisel 02 02 02 9 Cross pane Hammer 02 02 02 Digital PH Meter range 0-14 01 01 01 10 PH Electronics Precission &
Counting Balance 01 01 01 11 (3Kg/0.1gm) Elico Digital Water Quantity 01 01 01 12 Analyser 13 Hacksaw Fram 01 01 01 14 Hand Shawel 04 04 04 15 Jar set Apparatus 01 01 01
16 Lead Caulking Tool 05 05 05 17 Noice Level Tester 01 01 01 18 Pipe Bending Machine 01 01 01 19 Pipe Die Set (1/4''to 2'') 01 01 01 20 Pipe Die Set (1/2'' to 1'') 01 01 01 21 Pipe Die (1/2'' to 1'') 02 02 02 22 Pipe Die Set (1/4'' to 2'') 02 02 02 23 Pipe wrench 10'' 01 01 01 24 Pipe wrench 10'' 05 05 05 25 pipe wrench 12'' 01 01 01 26 pipe wrench 12'' 05 05 05
Signature of the Principal/ Head of the Institution
35
27 pipe wrench 14'' 01 01 01 28 pipe wrench 14'' 04 04 04 29 pipe wrench 18'' 01 01 01 30 pipe wrench 18'' 02 02 02 31 pipe wrench 24'' 02 02 02 32 Pipe vice 3" 01 01 01 33 Pipe vice 3" 04 04 04 34 Plumbert tool kit 05 05 05 35 Ratched type Die (1/2 to 2) 01 01 01 36 Screw Drivers 3" 06 06 06 37 Sprit Level 02 02 02 38 Spun Yarn Caulking tools 04 04 04 39 Steel Footrule 12" 01 01 01 40 Turbidity meter digital 01 01 01 41 Thermo meter long size 01 01 01 42 Viscosity Appartas 01 01 01 43 Water Analysis kit 01 01 01 waste water multiper meter
system (BOD & COD, 01 01 01 Refrigreation Incubation 3- 44 50ºC
Computer Engg.
Sr. Name of Name of Major/Essential Equipment No. No Worki Remarks No Laboratory Teacher required for conduct of Practical Of Av ng . Requ aila Condit ired ble ion 1 Software Surender Computer System( i5) with 15 15 Yes Lab 4 Kumar 500GB Hard Disk, 4GB RAM with TFT , KB,Mouse Online Ups 5KVA with 12 V, 26 1 1 Yes Ah 16 No. Batteries Wall Mounting Switch Rack 1 1 Yes 24 Ports Ethernet 1 1 Yes Non Manageable switch HP LaserJet Printer 1566 1 1 Yes DLP Multimedia Projector (Dell 1 1 Yes 4210X) 3500 Lumens
Signature of the Principal/ Head of the Institution
36
2 Soft Lab1 Ajay HCL Intel Duo Core 2GB 15 14 Yes Singh RAM,300GB HDD with TFT, KB and Mouse 5 KVA UPS With 30 nos of 28 1 1 Yes Ah batteries A.C. 1.5 ton Window type LG 3 3 Yes make with Stabilizer HP Scanner 2400 1 1 Yes Wireless Router(54 mbps) 2 2 Yes 24 Port Unmanaged Ethernet 1 1 Yes Switch 3 Software Amrita Server System 2.4 GHz HCL P-IV, 512 01 01 Yes Lab-3 Saini MB RAM, 40 GB HDD, DVD R, CD RW, MONITOR HCL MAKE, KB AND MOUSE Networking Printer Server Hub 01 01 Yes 8 PORT VGA to PAL Converter 01 01 Yes VGA SPLITTER 01 01 Yes Switch 16-port Unmanaged 01 01 Yes Head Phone Millenium 01 01 Yes Screw Driver 01 01 Yes Nose Plier 01 01 Yes HDD Sata 80 GB 02 02 Yes Mother board 815 WIP 03 03 Yes
HP Compaq Laptop 01 01 Yes Computer System intel corel i7 02 02 Yes processor 4GB ddr3 RAM 1TB Sata HDD 20'' LED Display UPS (1 KVA) 01 01 Yes USB Finger print Scanner used 01 01 Yes in AEBAS system Computer System P-III 450 0 2 No MHz,32 MB RAM, 4GB HDD, monitor hcl make, kb and mouse Computer System P-III 450 0 3 No MHz,32 MB RAM, 4GB HDD, monitor hcl make, kb and mouse Computer System P-IV 1.5 5 1 No GHz,512 MB RAM, 40GB HDD, MONITOR HCL MAKE, KB AND MOUSE CVT (1KVA) 1 1 No Laser Printer 8PE 1 1 No UPS (1 KVA) 2 2 No DMPrinter Wipro LX800 0 1 No UPS (625 VA) 0 4 No UPS(1 KVA) 2 2 No Laser Printer HP710C 2 1 No 4 Software Anil Oracle 10g St. edition 5 user(01) 01 01 YES
Signature of the Principal/ Head of the Institution
37
Lab-2 Kumar Oracle 10 g St. edition media 01 01 YES kit(01) Windows A.C (1.5 TON) 1 NO. 02 02 YES Videocon Make and 1 No. LG Make (Total 02 No.) Digital Trainer kit 01 01 YES Microprocessor 8086 kit 01 01 YES Microprocessor 8085 kit 01 01 YES DVD writer 02 02 YES Voltage Stablizer 4 KV 02 02 YES Computer System i5 500GB HDD, 4GB 02 02 YES RAM, TFT MONITOR, KB AND MOUSE Dell 3010 intel core i3 processor, 4GB 10 15 YES RAM,500GB HDD, DVD RW, TFT 18.5 Computer Set Accer (Black) P-IV 80GB 03 0 YES HDD, 512 MB RAM, DVD R, ACCER COLOR MONITOR Computer Set HCL(white) P-IV 80GB 05 0 YES HDD, RAM 512 MB, DVD R, COLOR MONITOR Laser Printer HP 1022 01 01 YES Screw Driver Set 06 02 YES Combination Plier 03 03 YES Long Nose Plier 03 03 YES UPS of 5KVA(Online)with 100 Ah 01 01 NO (14 No. Of batteries) Voltage Stablizer 4 KV 01 0 NO UPS OFFLINE (Small) 700VA 08 0 NO Color Monitor HCL MAKE (CRT) 01 0 NO
Electronics & Communication Engg
S. Name of Name of Major/Essential Equipment No. of No Working Remarks N. Laboratory Teacher required for conduct of Practical Required Available Condition
1 M drived LPF 01 01 01
2 Oscilloscope 01 01 01
3 08 08 08 Bread Boards 4 Multiple output power supply 01 01 01
5 Digital Multimeter 01 01 01 6 Power Supply 02 02 02
7 Audio Signal Generator 02 02 02 8 RF Output Power Meter 01 01 01
9 AF Output Power Meter 02 02 02 Adv.Comm Sh. Ravinder 10 Diffrent Types of Filters 01 01 01
Signature of the Principal/ Head of the Institution
38
1 Lab/Instur Kumar/Sh. 11 CRO 20 Mhz 02 02 02 mentation Inderjeet Singh 12 Pulse Generator 01 01 01
13 Frequency Counter 01 01 01
14 Telecommunication Trainer 01 01 01
15 Audio Test System 02 02 02 Verification of Network 16 Theorem 01 01 01
17 Distortion & Level Meter 01 01 01
18 Field Strength Meter 01 01 01
19 Ammeter 100mA, 1mA 03, 02 03, 02 03, 02
20 Function Generator 02 02 02 PAM, PWM, PPM 21 MOD/DEModulator 01 01 01 Delta Modulator & 22 Demodulator 03 03 03
23 WorkStation 01 01 01
24 PCM Trainer 03 03 03
25 Laser Trainer 01 01 01
26 Transmission Line Trainer 02 02 02 FM Transmeter & Receiver 27 Trainer 01 01 01
28 Antena Trainer 01 01 01
29 Function Generator 01 01 01
30 CRO 01 01 01
31 Laser Trainer 01 01 01 PAM, PWM, PPM 32 MOD/DEModulator 01 01 01
33 160 GB Hard Disk 01 01 01
34 Processor Dual Core 01 01 01
35 DVD Writter 01 01 01
36 Mother Board 01 01 01
37 ATX Cabinet 01 01 01 Capacitve Pick up Angular 38 Displacment 01 01 01
39 LDR Characterstics 01 01 01 Photo Transitor 40 Characterstics 01 01 01
41 Photo Cell Characterstics 01 01 01
Signature of the Principal/ Head of the Institution
39
42 Thermistor Characterstics 01 01 01
43 Thermocouple Trainer Kit 01 01 01 Pressure Measurment using 44 Strain Gauge 01 01 01
45 Study of LVDT Trainer Kit 01 01 01
46 Fiber Optic Trainer 01 01 01
47 Load Cell 01 01 01
48 Sound Level Meter 01 01 01 Measurment of Humidity 49 using Humidity Controller 01 01 01 Measurment of Flow Rate 50 using Flow sensors 01 01 01
51 Electric Kettle 01 01 01
52 DSO 01 01 01
53 Fiber Optic Comm. System 01 01 01 Fiber Optic Source & 54 Detector 01 01 01
55 QPSK/DQPSK Mod. Kit 01 01 01
56 Fiber Optical Power Meter 01 01 01
57 Fiber Connector & SPLICE Kit 01 01 01
58 Digital Comm. System 01 01 01 BPSK/DPSK/DEPSK 59 MOD/DEMOD Kit 01 01 01
60 Digital Multimeter 01 01 01 Digital Multimeter 02 61 3 digit 02 02 Function Generator 01 62 3 Mhz 01 01
Signature of the Principal/ Head of the Institution
40
Sr Name of Name of Teacher Major/Essential Equipment No. of No Available Working Remarks No Laboratory required for conduct of Practical Required Condition Communic Rheostat Double Tube 25 2 ation Lab Sh. Deepender 03 03 03 Gill 1 OHM 10 Amp
Rheostat Double Tube15 04 04 04 2 OHM / 15 Amp 3 Rheostat single tube 04 04 04 4 Rheostat 2000 OHM/ 500mA 06 06 06 5 Decade Resistance Box 03 03 03 6 Decode Inductance Box 04 04 04 7 Decode Capacitance Box 02 02 02 8 Pulse Generator 01 01 01 9 Function Generator 01 01 01 10 Mixed Signal Scope 01 01 01 Arbitary wave from 01 01 01 11 generator 2-Band Radio Receiver 01 01 01 12 Demonstration Kit 13 DTH receiver Kit 01 01 01 Characteristics of 02 02 02 14 Microphone & Loudspeaker 15 ACER Computer system 01 01 01 16 UPS 625 VA 01 01 01 17 Tool Kit 02 02 02 18 Mobile Comm Trainer System 01 01 01 19 DTMF Telephone Trainer 01 01 01 20 EPABX Trainer 01 01 01 21 Mobile Phone Trainer 02 02 02 22 CRO scientech 01 01 01 23 Function Generator 01 01 01 24 160GB Hard Disk 01 01 01 25 DVD Writer (Internal) 01 01 01 26 Speakers 01 01 01 27 UPS (1KVA) 01 01 01 28 Motherboard intel 945 01 01 01 29 Cabinet (Normal) 01 01 01 30 TFT Monitor 01 01 01 31 Amplitude 01 01 01
Signature of the Principal/ Head of the Institution
41
Modulation/Demodulation Kit Frequency Modulation 01 01 01 32 /Demodulation Kit
33 PCM Trainer 01 01 01 AM Radio Receiver 01 01 01 34 Demodulation PAM, PWM, PPM 01 01 01 35 MOD/DEModulator Study of Amplitude 01 01 01 36 Modulation & Demodulation FM Modulator & 01 01 01 37 Demodulator Trainer Writing Board (White 01 01 01 38 Surface) Superheterodyne Transmeter 01 01 01 39 & Receiver
40 Digital Storage Oscilloscope 01 01 01 Sr Name of Name of Teacher Major/Essential Equipment No. of No Available Working Remarks No Laboratory required for conduct of Practical Required Condition
1 CVT Bhurji make 50-60 mhz 1 1 1
2 Uniline CVT 500VA 1 1 1
3 HCL computer P-III, 450 Mhz 1 1 1 3 Computer Sh. Ravinder Lab Singh Punia 4 CDROM Drive 52X 1 1 1 5 CDROM Drive 52X 6 6 6 6 Switch 10 port 1 1 1 7 Floppy disk drive - 1.44MB 5 5 5 Combo drive (CP writer+ 2 2 2 8 DVD) 9 Network Tool kit 1 1 1 10 Power Supply 1 1 1 11 LAN Trainer 1 1 1 Processor Dual Core 1.6 Ghz 1 1 1 12 fitted in assemble computer Hard Disk fitted in assemble 2 2 2 13 computer 14 DVD Writer Internal 2 2 2 Canon laser Printer LBP 1 1 1 15 2900B 16 UPS 6KVA (APC) 1 1 1 Core 2 DUO Processor Fitted 1 1 1 17 in Assembled Comp Intex
18 15'' LCD Monitor with 1 1 1
Signature of the Principal/ Head of the Institution
42
Assembled computer Motherboard intel DG 41 (fitted in Assembled 1 1 1 19 computer) Motherboard P-IV fitted in 1 1 1 20 Assembled computer) 500 GB hard disk (fitted in 1 1 1 21 Assembled computer) Cabinet with SMPS (fitted in 1 1 1 22 Assembled computer) DVD-RW SATA- fitted in 1 1 1 23 assemble computer Computer system P-IV with 1 1 1 24 monitor HCL make 25 Dell PC-I5 1 1 1 26 Dell PC-I5 1 1 1 AMD Athlon 64 Bit (Acer 5 5 5 27 make) 28 D-Link wireless Access point 1 1 1 Sr Name of Name of Teacher Major/Essential Equipment No. of No Available Working Remarks No Laboratory required for conduct of Practical Required Condition 68K Microprocessor with RS 1 1 1 232 interface including a 8- 1 digit display Microprocessor based 1 1 1 4 Digital & Sh. Sandeep 2 controller model Microproc Goel Microprocessor8086/8088 kit 3 3 3 essor/Med Trainer model 25 key ical Lab 3 keyboard Digital trainer board HIL 1 1 1 4 2921 Microprocessor based 2 2 2 5 system 8 bit 6 Microprocessor Kit HIL 2964 3 3 3 7 Digital IC Trainer HIL 2921 1 1 1 8 8- Bit 8085 training kit 1 1 1 16 bit 8086/ 8088 Training 1 1 1 9 Kit Digital Multimeter Model 2 2 2 10 4011 3 ½ Digit 11 Multiple output power supply 1 1 1
12 Bistronics Make PLC Trainer 3 3 3 13 Power Supply 30 volts 5 A 1 1 1 14 Power Supply 30 volts 2 A 2 2 2 15 CRO 20 MHz 2 2 2
Signature of the Principal/ Head of the Institution
43
16 Scientific make freq. Counter 1 1 1 Analog Multimeter Sanwa 2 2 2 17 make 8086 microprocessor kit cum 2 2 2 18 EPROM Programmer Mixed signal scope model 1 1 1 19 54645/D Arbitary wave from 1 1 1 20 generator 21 Audio Signal Generator 2 2 2 8086 Trainer kit with space 1 1 1 22 FBD key keyboard 23 8051 Microcontroller 1 1 1 8085 Emulator Training 1 1 1 24 Board 25 8255 PPI 1 1 1 26 8257 DMA Controller 1 1 1 8259 Prorammed Keyboard 1 1 1 27 Display interface 8253 prog. Counter/ interval 1 1 1 28 timer 29 Stepper Motor 1 1 1 A/D-D/A using ADC 0809 & 1 1 1 30 DAC 0808 31 Dual Stepper Motor 1 1 1 Elevator Simulator study 1 1 1 32 Card 8255 study cum logic 1 1 1 33 controller 34 Automatic Digital IC tester 1 1 1 35 Digital IC trainer 1 1 1 36 4 Bit ALU Demo card 2 2 2 37 Digital to Analog Ttainer 2 2 2 38 Digital training Board 1 1 1 Digital Logic trainer with 1 1 1 39 Bread Board
40 Digital Training Board 1 1 1 Auto Computer Digital IC 1 1 1 41 Function Tester 42 EPROM Programmer 1 1 1 A/D & D/A using IC 0800 & 1 1 1 43 0804
Signature of the Principal/ Head of the Institution
44
44 EPROM Eraser 1 1 1 45 Digital IC Trainer 1 1 1 46 8085 Kit 2 2 2 47 8086 kit 2 2 2 48 EPROM Training Kit 1 1 1 49 Digital IC Trainer 1 1 1 50 PLC Trainer 1 1 1 51 D/A and A/D Converter 1 1 1 52 EPROM Programmer 1 1 1 53 Sync. & Async.Counter 1 1 1 54 BP Apparatus 2 2 2 55 ECG Machine Single Chanel 1 1 1 56 Pulse Meter 1 1 1 57 Glucometer 2 2 2 Sr Name of Name of Teacher Major/Essential Equipment No. of No Available Working Remarks No Laboratory required for conduct of Practical Required Condition 5 Consumer Sh. Rakesh 1 Bread board general purpose 03 03 03 Lab Manchanda
2 Bread board gold plated 01 01 01
3 Line frequency meter 02 02 02
Regulated power supply 30V 01 01 01 4 1Amp
5 CRO probes 04 04 04
1KW high freq. Di electric 01 01 01 6 heating machine
AM modulation/demodulation 02 02 02 7 board
Freq. Modulation/De 02 02 02 8 modulation board
9 PWM board 02 02 02
10 PPm board 02 02 02 11 PAM board 02 02 02
12 Picture cube 02 02 02 13 Video pattern generator 1088 01 01 01 14 Ossicillo scope test lab TL 401 01 01 01 15 PCB drilling machine 01 01 01 16 Digital multimeter 4011 01 01 01 17 Bread board 02 02 02 18 Function generator 01 01 01
Signature of the Principal/ Head of the Institution
45
APLAB 20Mhz dual trace 01 01 01 19 Osscillo scope 20 Sanwa multimeter 02 02 02 Black & white pattern 02 02 02 21 generator TransistorISED power supply 02 02 02 22 30V 2Amp 23 Power supply 30V 5Amp 01 01 01
24 Audio signal generator 02 02 02
25 AF output meter 851 01 01 01
26 1 Ghz freq. Counter 01 01 01
27 20Mhz pulse generator 01 01 01
28 DVD player 01 01 01
29 Regulated power supply 01 01 01
30 Stereo Amplifier 01 01 01
31 VCD Player 01 01 01
32 Digital IC tester 01 01 01
33 CRO model ST 201 01 01 01
34 CTV trainer 01 01 01
35 Set Top Box 01 01 01
36 CTV BPL 01 01 01
Digital versatile disc player 01 01 01 37 demo stration
38 Digital multimeter trainer 01 01 01
39 Samsung colour TV 01 01 01
Samsung DVD player with 01 01 01 40 speaker
41 LCD intex monitor 17'' 01 01 01
42 600VA microtek UPS 01 01 01
43 Hand held Clamp meter 01 01 01
44 Multimeter digital 01 01 01
45 Function generator (Scientfic) 01 01 01
46 UPS make 800 VA (Microtek) 01 01 01 HOME UPS 800 VA (Invertor) 01 01 01 47 microtek 48 Battery 12V 150 AH 01 01 01 49 Analog multimeter Trainer 01 01 01 Function generator Demo 01 01 01 50 Stration Bread board trainer with power 02 02 02 51 supply 52 CRO demo stration 01 01 01
Signature of the Principal/ Head of the Institution
46
Analog lab trainer with bread 01 01 01 53 board PN junction diode Char. Appr. 01 01 01 54 With power supply and meter 55 Anti statory soldering station 01 01 01 56 Hot air soldering Station 01 01 01 Digital anti static soldering 01 01 01 57 Station Sodering station mantaince 01 01 01 58 centre 59 DC regulated power supply 01 01 01 60 Common emitter Amplifier 02 02 02 61 Common ecollector Amplifier 02 02 02
62 Wein bridge osscilator 02 02 02
63 Phase shift Osscilator 02 02 02
64 Audio power amplifier 02 02 02
65 Battery charger 01 01 01
Voltege stablizetion Char. Of 01 01 01 66 zenor diod with meter
Half wave, full wave & bridg 01 01 01 67 rectifier Appr.
68 Digital multimeter LCD display 02 02 02
Desecrate component trainer 01 01 01 69 Board
70 CRO 20Mhz Dual trace 01 01 01
71 Function generator 1Mhz 02 02 02
Digital multimeter LCD display 02 02 02 72 3½ Sr Name of Name of Teacher Major/Essential Equipment No. of No Available Working Remarks No Laboratory required for conduct of Practical Required Condition 6 AE/PE Sh. Dalwinder
ELTX. Lab Singh 1 Multimeter (Motwane) 01 01 01
Commoan Base transister 01 01 01 2 Characterstic
3 Half Wave Rectifier 01 01 01 4 Full Wave Rectifier 01 01 01 5 Full Wave Bridge Rectifier 01 01 01 Common Base 01 01 01 6 Amplifier(TTTI) Common Emitter 01 01 01 7 Characteristic Half / Full Wave 01 01 01 8 Rectifier(TTTI) Comman Emitter Amplifier 01 01 01 9 (TTTI)
Signature of the Principal/ Head of the Institution
47
10 Function Generator HIL 2821 01 01 01 11 Phase Shift Osscilator 01 01 01 Semi Conductor Diode 01 01 01 12 Characteristic 13 FET Amplifier 01 01 01 Zener Diode Characteristic 01 01 01 14 (Romtek) Regulated Power Supply 30 01 01 01 15 Volt 1 Amp. 16 Temp. Control Soldering Set 01 01 01 Analog Multimeter 01 01 01 17 (Motwane) 18 Digital Power Supply 3160 01 01 01 19 Multimeter (Sanwa) 01 01 01 Characteristic of Zener diode 02 02 02 20 with two digital meter(Gargi) Study of Solid state power supply with two digital 01 01 01 21 meter(Gargi) Study of diode clipping & 02 02 02 22 Clamping Ckt. Measurement of Self Inductance by Anderson's 02 02 02 23 Bridge Measurement of Capacitance 01 01 01 24 by Wein's Bridge Lamp Dimmer with SCR/ 01 01 01 25 Triac Board Regulated Power Supply 01 01 01 26 (ELNOVA)
27 Analog Multimeter 01 01 01 28 Bread Board 01 01 01 Zener Diode Charcterstic 01 01 01 29 Appertus 30 UJT Relexation Osscillator 01 01 01 31 Wein Bridge Osscillator 02 02 02 32 SCR/ TRIAC ch. Board 03 03 03 33 Bistable Multivibrator Board 01 01 01 Monostable Multivibrator 01 01 01 34 Board 35 Astable Multivibrator Board 01 01 01 36 UJT Ch. Board 01 01 01
Signature of the Principal/ Head of the Institution
48
Hartlay/ Colpits Osscillator 01 01 01 37 Board 38 Push Pull Amplifier 01 01 01 OSAW OPA-3 Electronics Kit 01 01 01 39 study of Op. Amp. Teaching Kit OSAW OPA-3 02 02 02 40 study of Op. Amp. 41 Teaching Kit OSAW LGT-16 01 01 01 42 OSAW FLTR -14 Board 01 01 01 43 OSAW COMP-13 Board 01 01 01 Study of Analog Voltage 01 01 01 44 COMP.-13 45 OSAW FF-18 Board 01 01 01 Study of Pulse Triggered Edge Triggered T&d ff 01 01 01 46 Master Slave OSAW FF-18 SCR as a Half Wave Rectifier 01 01 01 47 Board Differentiator Integrator for 01 01 01 48 Different RC Constant Two Stage RC Coupled Amp. 01 01 01 49 Board
50 LCR Impidence Circuit 02 02 02 51 LCR Resonace Circuit 02 02 02 Doide P-N Junction Ch. For 01 01 01 52 Forward & Reverse Bias Exp. Board for Schmitt 02 02 02 53 Tigger
54 Exp. Board for JFET Amp. 02 02 02 Exp. Board for Poltting FET 02 02 02 55 Ch. Exp. Board for Poltting VI 01 01 01 56 Ch. Of SCR/Triac Exp. Board for BAND PASS 01 01 01 57 Filter SCR Based Single Phase Half Wave Controlled Rectifier 01 01 01 using R-C Phase shift 58 (GARGI) SCR Controlled Single Phase 01 01 01 59 Bridge rectifier(GARGI) Exp. Board for Series 02 02 02 60 &Parallel Resonance Study 61 Scientech ST 2001 C.R.O 01 01 01
Signature of the Principal/ Head of the Institution
49
Demonstation Trainer Power Supply (Omega) 01 01 01 62 Multiple Output 63 Digital Multimeter 4011 01 01 01 64 Audio Osscillator (MORAJ) 02 02 02 65 Signal Injector 01 01 01 66 Signal Tracer 01 01 01 67 Power Supply 30Volt 2 Amp. 01 01 01 Digital Frequency Counter 01 01 01 68 (Testron) AF O/P Power Meter 851 01 01 01 69 (MORAJ) 70 Multimeter (Sanwa) 02 02 02 Bridge Rectifier 01 01 01 71 Board(MORAJ) Decade Resistance 02 02 02 72 Box(Tropicon) Decade Inductance 02 02 02 73 Box(Tropicon) Decade Capacitance 02 02 02 74 Box(Tropicon) Hartlay Osscillator Board 02 02 02 75 (Tropicon) Colpitts Osscillator Board 01 01 01 76 (Tropicon)
77 Clamping Circuit Board 01 01 01
Astable Multivibrator Board 01 01 01 78 (TROPICON) ESB for Diode Dubbler /Trippler Ckt. Board 03 03 03 79 (TROPICON) V/I Ch. Of P-N Junction 02 02 02 80 Diode 81 V/I Ch. Of FET(TROPICON) 01 01 01 ESB for Half/ Full Wave/ 01 01 01 82 Bridge Rectifier Exp. Board of Supply of 01 01 01 83 Application of IC 555 Study of Bistable 01 01 01 84 Multivibrater Board Complimentary Power Amp. 03 03 03 85 Board 86 ESB Push Pull Amp. Board 01 01 01
Signature of the Principal/ Head of the Institution
50
Exp. Board for different type 01 01 01 87 of Biasing 88 Semi Conductor Diode Board 01 01 01 89 Transistor Ch. Board 01 01 01 Study of Direct coupled Amp. 01 01 01 90 Board Study of Wein Bridge 01 01 01 91 Osscillater Board Study of Series & Shunt 03 03 03 92 Regulation Circuit Study of R-C coupled Amp. 01 01 01 93 Board 94 RC Differentiating Ckt. 02 02 02 95 RC Integrating Ckt.Board 02 02 02 Study of Regulated Power 02 02 02 96 Supply using 7805, 7905 Study of Schmitt Tigger 01 01 01 97 Board 98 Series & Shunt Clipping Ckt. 01 01 01 Study of Series Regulation 03 03 03 99 Circuit Single Ended Power Amplifier 02 02 02 100 Board Study of Diffrent Biasing Ckt. 03 03 03 101 For BJT
Study of Diffrent Biasing Ckt. 03 03 03 102 ForJFET / FET Biasing Board Monostable Multivibrator 01 01 01 103 Board
104 Phase Shift Osscillator Board 01 01 01 Crystal Osscillator Board 01 01 01 105 (PARASH Eltx.) 106 Emiter Follower CKT 02 02 02 107 Dlode Clipping Ckt. 02 02 02 108 109 Single stage Feadback Board 01 01 01 Transistor Tester 911 01 01 01 110 (Systronics) 111 Op. Amp. Application Trainer 01 01 01 Emiter Follower CKT (Long 01 01 01 112 register entry) UJT Relexation Osscillator 01 01 01 113 Ckt.
Signature of the Principal/ Head of the Institution
51
114 Wein Bridge Osscillator 01 01 01 115 Phase Shift Osscillator 01 01 01
Two Stage RC Transistor 01 01 01 116 Coupled Amp. Board
117 Differntiator Integrator Ckt. 01 01 01
118 Hartlay/ Colpitts Osscillator 01 01 01
119 Push Pull Amplifier 01 01 01
120 Frequency Modulation Ckt. 01 01 01
121 Full Wave Rectifier 01 01 01
122 Bread Board 02 02 02
123 Full Wave Bridge Rectifier 01 01 01
124 Half Wave Rectifier 01 01 01
125 AC Fan Speed Control Ckt. 01 01 01
Triac Based AC Phase 01 01 01 126 Control Ckt.
127 Speed Control Ckt. With SCR 01 01 01
128 CRO Systronics 01 01 01
129 CRO Argonic 01 01 01
130 Audio Oscillator(RADART) 01 01 01
131 Audio Oscillator(BESCO) 02 02 02
132 Power Supply (1412) 01 01 01
133 Transistor Ch. Apparatus 01 01 01
134 Zener diode ch. Apparatus 01 01 01
135 Volt OHM Multimeter 01 01 01
136 AF O/p Meter(RADART) 01 01 01
137 Zener diode ch. Board 01 01 01
Semi conductor Diode Ch. 01 01 01 138 Board
Digital Power Supply HIL 01 01 01 139 3160
Transistor Tester 911 01 01 01 140 Systronic
Analog Multimeter 02 02 02 141 (Motwane)
Regulated Power Supply (0- 01 01 01 142 30Volt)
143 Function Generator 01 01 01
144 Digital Multimeter HIL 2120 01 01 01
Signature of the Principal/ Head of the Institution
52
Function Generator 20MHZ 01 01 01 145 (APLAB)
146 CRO 20MHZ model ST201 01 01 01
Transistor Ch. Appretus 01 01 01 147 (Galaxy)
148 RC Coupled Amp. (Galaxy) 01 01 01
SCR/ DIAC/TRIAC Ch. 01 01 01 149 Appretus
150 Analog Trainer 01 01 01
151 LCR Q Meter 01 01 01
Function Generator 01 01 01 152 Demonstrator ME 1210
8 Digit Frequency Counter 01 01 01 153 2.4 GHZ
Function Generator 5 MHZ with frequency Counter 01 01 01 154 model ME 957
155 Study of LCR impedance Ckt. 01 01 01
156 Kirchoff's Law Apparatus 01 01 01
157 OHM's Law Apparatus 01 01 01
Apparatus for Verifying 01 01 01 158 Theorems
159 UJT Ch. Kit 02 02 02
160 UJT as relaxation Osc. 02 02 02
161 Hartley / Colpits Osc. 02 02 02
CB,CE,CC Transistor I/P & 02 02 02 162 O/P Ch.
163 Arbitrary Function Generator 01 01 01
164 CRO 30 MHZ (Scientific) 01 01 01
165 Distortion Meter (Scientific) 01 01 01
166 Inductance Measurement kit 01 01 01
RLC Impedance kit 02 02 02
3 ½ Digital Multimeter 01 01 01 (Meco)
Antistatic soldering station 01 01 01 169 (CEGO ENTRY)
170 Hot air soldering station 01 01 01
171 Analog multimeter trainer 01 01 01
172 Digital multimeter trainer 01 01 01
Bread board trainer with 02 02 02 173 power supply
Signature of the Principal/ Head of the Institution
53
Analog trainer with bread 01 01 01 174 board
P N junction diode char. Appr. With power supply 01 01 01 167 with meters
Voltage stabilization Char. Of 01 01 01 168 Zener diode with meters
Half wave, full wave & 01 01 01 177 bridge Rectifier Appr.
Digital multimeter LCD 03 03 03 178 Display 3½ digit (small size)
Discrete components trainer 01 01 01 179 board
CRO 20MHZ dual trace 01 01 01 180 (Scientific)
Function generator 1MHZ 01 01 01 181 (Scientific)
Digital multimeter LCD 02 02 02 182 Display 3½ digit (big size)
Electrical Engineering
S.N. Name of Name of Major/ Essential No.of No. available Working Remarks Laboratory Teacher Equipment required condition required for conduct practical 1. Electrical Mahinder Synchronising 01 No. Nil Nil Machines Kaushik Switch Lab Three Phase 01 No. 03 Nos. 01 OK Variac Alternator 01 No. 01 No. OK coupled with slip ring I.M. exciter 3 phase 01 No. 03 Nos. 03 OK induction motor Slip ring 01 No. 01 No. OK induction motor D.C. Shunt 01 No. 01 No. OK Motor D.C. Series 01 No. 01 No. OK Motor Single Phase 01 No. 03 Nos. 01 OK Transformer Three Phase 01 No. 02 Nos. 01 OK Transformer Single Phase 01 No. 01 No. OK
Signature of the Principal/ Head of the Institution
54
Induction Motor Static Converter 01 No. 01 No. OK / Rectifier S.N. Name of Name of Major/ Essential No.of No. available Working Remarks Laboratory Teacher Equipment required condition required for conduct practical 2. EMMI Lab Poonam Digital 02 Nos. 02 Nos. OK Saini Multimeter 1 Ø Energy 01 No. 01 No. OK Meter 1 Ø Load 01 No. 01 No. Ok Voltmeter 02 Nos. 02 Nos. OK Ammeter 02 Nos. 02 Nos. OK Lamp Load 01 No. 01 No. OK Board Kit for measurement 01 No. 01 No. OK earth resistance
Earth Tester 01 No. 01 No. OK
Kit for Two Watt 01 No. 01 No. OK meter method
Watt Meter 02 Nos. 02 Nos. OK
Three Phase Loading Rheostate 01 No. 01 No. OK Kit for LCR Q- 01 No. 01 No. OK Meter Panel for 1 phase energy meter 01 No. 01 No. OK Voltmeter 02 Nos. 02 Nos. OK Moving iron type
Variac 01 No. 01 No. OK S.N. Name of Name of Major/ Essential No.of No. available Working Remarks Laboratory Teacher Equipment required condition required for conduct practical 3. Electrical Parmod 3 Ø Induction 02 Nos. 01 No. OK Wiring Kumar Motor 5HP Shop Lab 1 Ø Induction 02 Nos. 01 No. OK Motor Star Delta 02 Nos. 01 No. OK Starter Drill Machine 03 Nos. 02 Nos. OK Ceiling Fan 02 Nos. 02 Nos. OK S.N. Name of Name of Major/ Essential No.of No. available Working Remarks Laboratory Teacher Equipment required condition required for conduct practical
Signature of the Principal/ Head of the Institution
55
4. CPA Lab Parmod Computers (10 Kumar nos.), AMD Athilon GPB BIT, 2.2 GHz, 256 MB DDR-II 10 10 RAM, 80 GB SATA Hard-disk Drive, CRT 15" Monitor UPS 5KVA with Batteries 01 01 Computers (01 no.), AMD Athilon GPB BIT, 2.2 GHz, 256 MB DDR-II 01 01 RAM, 80 GB SATA Hard-disk Drive, CRT 15" Monitor HP Laser 01 01 Printer, 1505 UPS 800 VA with inbuilt 01 01 battery PLC Trainer Kit 01 01 8051 Micro 02 02 Controller Kit 8085 Microprocessor 01 01 Kit S.N. Name of Name of Major/ Essential No.of No. available Working Remarks Laboratory Teacher Equipment required condition required for conduct practical 5. Electronics Monika CRO 01 No. 01 No. OK Lab Aggarwal Function 01 No. 01 No. OK Generator Kit for SCR 02 Nos. 02 Nos. OK Kit for Diac 01 No. 01 No. OK Kit for UJT 01 No. 01 No. OK Characteristics Kit for UJT 01 No. 01 No. OK relaxation Oscillator Kit for 01 No. 01 No. OK illumination Control Kit for speed 01 No. 01 No. OK control of DC shunt motor Kit for Single 01 No. 01 No. OK phase
Signature of the Principal/ Head of the Institution
56
controlled rectifier Kit for U-I 02 Nos. 02 Nos. OK contact of diode Kit for Zener 01 No. 01 No. OK Diode Kit for Half 02 Nos. 02 Nos. OK Wave rectifier Kit for Full 02 Nos. 02 Nos. OK wave rectifier Kit for centre 02 Nos. 02 Nos. OK tap rectifier Kit for CE 01 No. 01 No. OK configuration Kit for CB 01 No. 01 No. OK Amplifier Kit for Single 01 No. 01 No. OK stage CE Amplifier Multimeter 05 Nos. 05 Nos. OK Voltmeter 04 Nos. 04 Nos. OK Ammeter 04 Nos. 04 Nos. OK
Mechanical Engineering
Sr. Name of Laboratory Name of Major/Essential Equipment No. No. Working Re No. Teacher required for conduct of Requir Avail Conditio mar Practical ed able n ks 1. CAD SANJIV Computer P-II (350MHz) With NIL 01 U/S KUMAR Intel motherboard Processer speed 350Mhz, Ram-32 Mb, HDD-4.3 GB Colour monitor -14 Inch Keyboard -105keys, CD-ROM- 32 X 2. Computer P-II (400 MHz ) With NIL 01 U/S Intel motherboard Processer speed 400Mhz, Ram-32 Mb, HDD-4.3 GB Colour monitor - 14Inch Keyboard -105keys, CD-ROM- 32 X 3. Computer P-III (450MHz ) With NIL 07 U/S Intel motherboard Processer
Signature of the Principal/ Head of the Institution
57
speed 450Mhz, Ram-64 Mb, HDD-6.4 GB Colour monitor -15 Inch Keyboard -105keys, CD-ROM- 48 X FDD-1.44 Mb
4. H.P DeskJet Printer 880C NIL 02 U/S 5. H.P DeskJet Printer 710C NIL 01 U/S 6. Plotter NIL 01 U/S 7. U.P.S -230 Volts A.C, 5KVA – 02 02 Working Harmonic. 8. CVT -500Watts(0.5 KVA) 02 02 Working 9. Lan Hub- 16 port 01 01 Working 10. Slide projector-(Auto Focus) 01 01 Working 11. Over Head Projector(280 mm * 01 01 Working 250 mm) 12. Sealed maintenance free 16 16 Working batteries-12Volt /40AH 13. UPS-625 VA 01 01 Working 14. UPS-625 VA 01 01 Working 15. Computer AMD ATHCOM64 02 02 Working bit 3500, 2.2G Hz Processer speed 2.2 GHz, Ram-512 Mb, Colour Black monitor -14Inch Keyboard -105keys, CD-ROM-32 X 16. Auto CAD 2007 01 01 Working 17. Computer HP Compaq 8300 13 08 Working Intel core-I5-3470 Vpro tech.3.2 GHz, HDD-500 GB Satta, Keyboard -104 Keys, Ram-DDR 3-4Gb TFT Screen- 18.5 Inch Mouse Optical 18. DLP Multimedia Projector(dell 01 01 Working Model 510*3500) 19. HP LaserJet Printer 01 01 Working 1. SOM ANEESH Impact strength testing m/c 01 01 Working KUMAR (Charpy) 2. Impact strength testing m/c 01 01 Working (Izod) 3. Rockwell hardness testing m/c 01 01 Working 4. Stiffness (Spring) testing m/c 01 01 Working 5. Deflection of beam testing m/c 01 01 Working 6. 01 01 Not Universal testing m/c Working 1. RAC HITESH Refrigeration Tools(Cutter, 02 02 Working CHAWLA Benches, Swaging, Flaring, each each Brazing) 2. Safety devices(HP/LP cut out, 02 02 Working OLP, Thermostat Switch, each each Filter, Drier 3. Refrigerator 01 01 Working 4. Window A.C 01 02 Working 5. Charging Board 01 03 Working 6. Refrigeration cycle 01 01 Working
Signature of the Principal/ Head of the Institution
58
demonstration unit 7. Cut section of single cylinder 01 01 Working reciprocating compressor 1. TD ASHWANI Models of Cencashive, 01 01 Working KUMAR Bagcock & Wdlore Boeler each each
2. Various Mounting/Accessories 01 01 Working for boilers each each
3. Thermocouple/ Pyrometer 01 01 Working each each
4. Air Compressor 1 1 Working 1. BEE RAJNI 3-Q induction motor, D.O.L 02 03 Working MEHRA starter 2. 1-Q Motor, Switch 02 02 Working 3. Lead and Battery 01 02 Working 4. Line tester, Test lamp 02 04 Working 5. Energy Meter, voltmeter, Am- 02 02 Working meter, Wattmeter 6. Distribution Board 02 04 Working 7. D.C Powder Supply, DC 02 02 Working Ammeter, DC Voltmeter Rheostat 8. Standard Resistance 100 02 02 Working Ohm, 5A, Voltmeter D.C 0- 30V, Am-meter 0-5 A, D.C variable D.C power supply 0- 30V 9. Standard resistance 100Ohm 02 02 Working 5A, D.C power supply 0-30 V, Voltmeter 0-30V, D.C Ammter 0-1A, 0-3A 10. Experimental board, Regulator 02 02 Working power supply (0-30V) 11. Experimental board, transistor, 02 02 Working Power Supply (0-30V), Voltmeter 0-3V, 0-10V 12. Experimental board mili 02 02 Working ammeter (0-30ma) regulator power supply 3. WP-I W/S Crucible Tilting Furnace 01 01 Un- Serviceable Moulding machine hand driver 01 01 Working Cupola Furnace 01 01 Un- Serviceable Sand Mixer M/c 01 01 Working MIG Welding Machine 02 01 Working TIG Welding Machine 02 01 Working Spot Welding Machine 01 01 Working Gas Welding Machine NIL 01 Working Seem Welding Machine 01 01 Un- Serviceable Portable Welding Machine 01 01 Working Drill Machine NIL 01 Working Grinding Machine Nil 01 Working 4. CNC W/S CNC T-70 Lathe M/C AC 01 01 Working
Signature of the Principal/ Head of the Institution
59
Based CNC T-70 Lathe M/C Non- AC 01 01 Un- Serviceable Based Milling M/C (Trainer) 01 01 Un- Serviceable Vertical Milling M/c -200T 01 01 Working Vertical Milling M/c -400T 01 01 Working Star Turn Lathe M/c 01 01 Working Flexible Manufacturing System 01 01 Un- Serviceable 5. WP-III W/S Shaping Machine 04 04 Working Milling Machine Horizontal 01 01 Working Vertical Milling 01 01 Working Universal Milling 03 03 Working Lathe Machine 07 07 Working Power Hacksaw 01 01 Working Tool & Cutter Grinding M/c 03 03 Working Cylindrical Grinding M/c 01 01 Working Surface Grinding M/c 01 01 Working 8. Gen Workshop-I W/S Welding Set A.C oil cooled 02 02 Working Welding Set Air Cooled 01 01 Working Gas welding set high pressure 01 01 Working Bench Grinding 01 01 Working Bench vice 5” 30 20 20 Powder Coating M/C 01 01 Working Electric Drilling M/C 02 02 Working Meggar 01 01 Working Geyser 01 01 Working Hand Drilling M/C 02 02 Working Amper Meter 01 01 Working Energy Meter 01 01 Working Watt Meter 01 01 Working D.O.L Starter 01 01 Working Electric Iron 01 01 Working Combination Plier 04 04 Working Screw Driver 05 05 Working Champion Forge 43” x 22” 02 03 Working Anvil 150Kg 05 15 Working Hammers 04 Lbs. 05 17 Working Try Square 6” 05 01 Working Fullers 1x ¾” NIL 90 Working pairs Flatters 2 1/2 NIL 24 Working Fire Extinguisher 04 NIL NIL Leg Vice 02 02 Working Swage Block NIL 05 Working Blower 50 02 01 Working Brass Foot Rule 12” 05 01 NIL Drilling M/C ½ capacity NIL 01 Working Bench Grinder Single Phase NIL 01 Working Bench Vice 5” 03 01 Working Angle Disk grinder NIL 01 Working Heat treat furnace electric 01 01 NIL Bend Saw Machine 01 01 Working Universal wood working 01 01 Repaira machine ble
Signature of the Principal/ Head of the Institution
60
Bench Grinder 01 01 Repaira ble Bend Saw sharping machine 01 01 Repaira ble
Plastic Technology
Signature of the Principal/ Head of the Institution
61
Sr. Name of Name of Major/Essential No. of No Working Remarks No. Laborat Teacher Equipment required for Requi Availa Conditio ory conduct of Practical red ble n 1. PPT Virende Electronic weighing 01 01 Yes I&II r Nehra balance capacity - 160Kg Make- indosaw Scrap Grinding Machine 01 01 Yes Out put- 40 Kg / hr Drying oven – Temp 01 01 Yes range 50-250C. Vertical Hydraulic 01 01 Yes injection molding M/C Make – saguaro Automate injection 01 01 Yes molding M/C Make- Ranaplas Automatic Blow 01 01 Yes Molding M/C Make – (Allplas) Capacity 2ltr CNC Automatic 01 01 Yes injection molding Hand operated 01 01 Yes compression molding M/C (130g) Hand operated injection 10 10 Yes molding M/C 5each (30gm)&(15 gm) Agglomerator Make – 01 01 Yes Satguru 2. PPT - Virende vacuum forming m/c 01 01 Yes III r Nehra withmold of(Bin) Size 10*12 inch High speed PVC 01 01 Yes Compounding mixer capacity-2.5Kg (PVC pipe) Extruder 01 01 Yes Make - Satgueu Cutting and Sealing 01 01 yes Machine PantographEngraving 01 01 Yes High frequency PVC 01 01 Yes welding m/c Bore gauge (lc 01 01 Yes 0.001mm) Make- mitutoyo Combination set 01 01 Yes C33MHC-150 Make – starret Vernier Caliper 0- 01 01 Yes 300mm Make- mitutoyo
Signature of the Principal/ Head of the Institution
62
3. PTQC Rajeev Rockwell cum Brinell 01 01 Yes Narwal Hardness Testing m/c Make – Justy Izod impact strength 01 01 Yes Testing M/C for Plastics Make – enkay Rockwell cum Brinell 01 01 Yes Hardness Testing m/c(250kg) Make – enkay Fatigue Bending Tester 01 01 Yes for Plastics Make – enkay Tear Tester Make – 01 01 Yes enkay
Melt Flow index 01 01 Yes Make – enkay Vicat softening Point 01 01 Yes Make – enkay Surface & Vol. 01 01 Yes Resistivity Make – enkay Env. Stress cracking 01 01 Yes Resistance Testing apparatus Make – polyplast Gloss Meter 01 01 Yes Dart impact Tester 01 01 Yes Make – polyplast Tensile Testing M/C 01 01 Yes Make – enkay Heating oven Temp 01 01 Yes range 0-300C Electronic Precision & 01 01 Yes counting Balance Make – Indosaw capacity 3Kg Fatigue Bending Tester 01 01 Yes for Plastics 4. Fabricat S.K Coordinate measuring 01 01 Repairabl ion shop Sharma machine with e accessories CNC wire cut EDM with 01 01 Yes accessories Inside micrometers (50- 01 01 Yes 300mm) LC 0.01mm Vernier caliper (0- 01 01 Yes 300mm) LC 0.05mm Digital height gauge(0- 01 01 Yes 300mm) LC 0.01mm Bevel protractor 01 01 Yes
Signature of the Principal/ Head of the Institution
63
Snap gauge range0- 01 01 Yes 25mm EDM T- 3822, Ps- 20 01 01 Yes 5. VVF- S.K Ball mill (2Kg capacity ) 01 01 Yes Lab Sharma Double pipe heat 01 01 Yes exchanger apparatus Diffusions coefficient 01 01 Yes measurements of solids Temp. caliper or test rig 01 01 Yes Cut section model of 01 01 Yes Reciprocating pump Cut section model of 01 01 Yes centrifugal pump Heating oven 01 01 Yes Batch Distillation unit 01 01 Yes Hydraulic bench 02 02 Yes Plate & frame filter 01 01 Yes press Humidification column 01 01 Yes Liquid- liquid mixing 01 01 Yes apparatus Diffusion of liquid in 01 01 Yes air Stefan- Boltzmann law 01 01 Yes apparatus Cyclone separator 01 01 Yes Pressure Calibration 01 01 Yes Test Rig Automatic water heater 01 01 Yes (35 L) Lee’s and charton’s 01 01 Yes conductivity apparatus
PST Shiv Bulk density apparatus 01 01 Yes Lab Kumar Abbe’s refractometer 01 01 Yes Ford cup 01 01 Yes Magnetic stirrer with hot 01 01 Yes Plate 6. CADD Ajay T.V Tuner Card 01 01 Yes LAB Kumar (Internal ) Computer Pentium – II 01 01 Unservic 400MHz (HD eable 4.3GB,14” colour monitor , ram 4 MB , 32X CD Room, win – 98 Computer Pentium –II 01 01 Unservic 350 MHz (HD eable 4.3GB,14” colour
Signature of the Principal/ Head of the Institution
64 monitor , ram 4 MB , 32X CD Room, win – 98 Multimedia PC-II 02 02 obsolete 266/MHz (HD 4.3GB,14” colour monitor , 32bit Ethernet card , 1.44MB fdd , ram 32 MB , 32X CD Room, win – 98 Computer P-III 03 03 Unservic 450MHz(HD 64GB,14” eable colour monitor , ram 64 MB , ,1.44 MB fdd ,Pci 32 bit 48X CD Room, win – 98 Cadd Work Station with 01 01 Yes UPS Speeification P- II Tutor 2001 S/W 01 01 Yes Lan- card with Boot 01 01 Yes Ram LAN HUB 16 Port 01 01 Yes Computer Application 01 01 Yes MDT Auto Cad Software Mould Flow Part 01 01 Yes Adviser Plastic Flow (obsolete s) Mould Flow Adviser to 01 01 Yes verify Mould Design (obsolete s) Mould Creator to create 01 01 Yes mould assembly (obsolete software ) Room Air conditioner 01 01 Yes (Window type 1.5 Ton) Electric Voltage 01 01 Yes Stabilizer 4 KVA (fitted with A.C.) AMD Athalon 02 02 Yes computers (512MB ram 2.2 Ghz , DDR 2 256MB ,80GB hdd , 1.44MB Fdd , 107keys Keyboard 15 inch , colur moniter , 52 x CD room , Ethernet card , win XP DVD Writer (Ext) LG 01 01 Yes HP Scanjet 3200C 01 01 Unservic Scanner eable HP DeskJet 880C 01 01 Unservic
Signature of the Principal/ Head of the Institution
65
Printer eable Color Laser Printer 01 01 Unservic (1200 DPI, ram 32 MB , eable 10 bas etehernet Print speed 5 PPM UPS 5K V A with 16 01 01 Yes nos. of sealed maintenance free batteries (26 Ah) Computer P- III 450 01 01 obsolete MHz (HD 4.3GB,14” colour monitor , ram 4 MB , 32X CD Room, win – 98 Dot Matrix Printer 01 01 obsoletes
Applied Sciences
Sr. Name of Name of Major/Essential No. of No Working Remark No. Laboratory Teacher Equipment required for Requir Availa Conditio s conduct of Practical ed ble n Cantilever 5 5 YES Simple Pendulum 7 11 YES
Ohm's Law Apparatus 7 10 YES
Series/Parallel Law 7 10 YES Apparatus 1. Physics Smt. Priti Conversion of G into V 7 10 YES Lab Shrivastava Conversion of G into A 7 8 YES Galvensmeter 10 27 YES Voltmeter 10 27 YES Ameter 10 24 YES Resistance Box 5 7 YES Battery eliminator 10 16 YES Rheostat 7 17 YES Slotted weight 7 16 YES Red Wood Viscometer 3 3 YES 2. Chemistry Dr. Sunita Flash Point Apparatus 2 2 YES Lab Rani Muffle Furnance 2 2 YES Balance 4 4 YES
Signature of the Principal/ Head of the Institution
66
Workshop
Major/Essential Name of Equipment Name of No. of No. Working SN Teacher required for Remarks Laboratory Required Available Condition (Sh.) conduct of Practical 1 Welding Set 03 06 OK OK 01 01 2 Gas Welding Set OK 01 01 3 Drill Machine OK 01 01 4 Grinding Machine OK 01 01 5 Welding Paramjeet Anvil Bench vice OK Shop Singh 04 04 6 125mm OK 04 04 7 Hand Hacksaw OK 10 10 8 Welding SC OK 10 10 9 Leather Aprox OK 05 05 10 Try Square 1 Combination Plier 05 05 OK 2 Screw Driver 10 10 OK Electric Drilling 01 01 OK 3 Machine 4 Wiring Board 01 01 OK 5 Wire Cutter 05 05 OK 6 Hammer 05 02 OK Hand Drilling 02 02 OK 7 Wiring Jasmer Machine Shop Singh Amper Meter (0- 01 01 OK 8 10Amp) Volt Meter (0-150- 02 01 OK 9 300-600V) 10 Walt Meter 01 01 OK 11 Energy Meter 01 01 OK 12 D.O.L Starter 01 01 OK 13 3 Phase Motor 01 01 OK 14 Line Tester 05 05 OK MIG Welding OK NIL 02 1 Machine TIG Welding OK NIL 02 2 Advance Vikas Machine Welding Kumar OK 01 01 3 Spot Welding Gas Welding OK NIL 01 4 Planto
Signature of the Principal/ Head of the Institution
67
Portable Welding OK NIL 01 5 Transform OK 01 6 Drill Machine Garuding OK 01 7 Machine OK 05 8 Electrod Holder OK 05 9 Tong OK 05 10 Hand Hacksaw OK 10 11 File Bustered OK 02 12 Hammer 2 HP OK 10 13 Steel Rule OK 01 14 Anvil with stand OK 04 15 Bench vice OK 02 16 Welding Table OK 01 17 Working Table 1 Shaping Machine 04 04 OK Milling machine 01 01 OK 2 horizontal Vertical milling 01 01 OK 3 machine Universal milling 03 03 OK 4 machine Surface Plate 36" 01 01 OK 5 Machine Sushil x 36" Shop Kumar Bench Grinder 01 01 OK 6 1HP single phase Vernier caliper 04 04 OK 7 150mm Bench drill machine 15mm 01 01 OK 8 capacity 9 Try Square 6" 04 04 OK Powder Coating 01 01 OK 1 Plant Air Compressor Small Size for 01 01 OK 2 Spray Painting 3 Painting Shiv Spray Gun 01 01 OK Shop Charan Coat meter for paint thickness 01 01 OK 4 gaye 5 Blow Camp 01 01 OK 6 Brush 1" Camp 20 20 OK
Signature of the Principal/ Head of the Institution
68
7 Brush 2" Camp 20 20 OK 8 Brush 3" Camp 10 10 OK 9 Brush 4" Camp 02 02 OK 10 Disk Sander 01 01 OK 11 Sheet Cutter 01 01 OK Writing Brush (02 no., 04 no., 06 20 no. 20 no. OK no., 08 no., 12 each each 12 no.) CNC T-70 PC 01 01 OK 1 Base 2 CNC T-200 01 01 OK Denford Milling 01 01 Not working 3 Machine VCM-400 Milling CNC Harish 01 01 OK 4 Shop Khanna Machine 5 EDM 01 01 Not working 6 FMS 01 01 Under Repair 7 Starturn Lathe 01 01 OK CNC T-70 without 01 01 Under Repair 8 PC based Bench Grinder 01 01 OK 1 Single Phase Drilling machine 01 01 OK 2 16mm Cap Electrical drilling 01 01 OK 3 machine 1/2" Cap 4 Drial test indicator 01 01 OK Drilling machine 01 01 OK 5 vice 6 Surface Plate 01 01 OK 7 Bench Vice 5" 20 11 OK 8 Bench Vice 6" 03 03 OK 9 Advance Baltar Varnier Caliper 6" 02 02 OK Fitting Singh Power Hacksaw 01 U/s 10 machine 1/2 Prima tool drill 01 U/s 11 machine Jclick indian made one ton 01 U/s 12 cap. Anbor press 13 Hand Hack-Saw 10 05 OK 14 File Bastared 10" 40 20 OK 15 File half round 6" 12 12 U/s 16 Steel foot rule 6" 12 12 OK 17 Try Square 5" 10 10 OK 18 File round 6" 12 06 OK Fitting Mehma Bench double 01 01 OK 1 Shop Singh ended grinder
Signature of the Principal/ Head of the Institution
69
Hand Hack-Saw 10 10 OK 2 frame Metal cutting band saw NIL 01 U/s 3 machine 01 U/s & 01 01 02 4 Drill machine OK 5 Bastered file 10" 40 20 OK 6 File bastered 6" 20 10 OK 7 Vice 3", 5", 6" 15 22 OK 8 Try Square 6" 10 06 OK 9 Punch NIL 06 OK 10 Surface Plate NIL 02 OK 11 Hammer NIL 04 OK Universal wood 01 01 OK 1 working machine Wood turning Amir 01 01 OK 2 Pattern lathe machine Chand shop H.B.H wood Bhatia turning lathe 01 01 OK 3 machine Drill machine 01 01 OK 4 bend type OK Tool & Cutter 2 2 1 grinding machine Hydraulic OK cylindrical 1 1 2 grinding machine Surface grinding OK 1 1 3 machine OK 1 1 4 Power hacksaw Bench grinding OK 1 1 5 machine OK 2 2 6 Vernier Caliper Micrometer out OK Grinding Lakhwinder 2 2 7 side Shop Pal Singh OK 1 1 8 Tool Kit OK 1 1 9 Bench Grinder Hydraulic Power OK 1 1 10 Hacksaw Universal Tool & OK Cutter grinding 2 2 11 machine Hydraulic OK cylindical grinding 1 1 12 machine OK Horizontal surface 1 1 13 grinding machine
Signature of the Principal/ Head of the Institution
70
Micrometer out OK
side 10x10x4 OK 12x12x4 20 20 1 12x5x5 OK 5 5 OK 5 5 Gen sand muller OK 1 1 2 complete OK Foundary Ramesh Universal sand 1 1 3 Shop Kumar strength machine OK 1 1 4 Fettling machine Moulding OK machine hand 1 1 5 deaven Cupala furnace OK 1 1 6 15 feet OK 10 10 7 Moulding tool kits Electric oven OK 1 1 8 18"x18"x18"
PART H – FINANCIAL & PHYSICAL RESOURCES
Budgeted Expenditure for the year 2017-18
Expenditure Heads Budget Actual Shortfall if any (In lakhs) Expenditure I. Academic Buildings: - Construction ------Maintenance Expenses II. Laboratories/Computing Centre - New Equipment ------Furniture - Operation & Maintenance III. Salary - Salary of Teaching Staff 949200000 90333368 - Salary of Non-Teaching Staff 38880000 38714300 IV. Faculty/Staff Development (Seminars/Workshops/Incentive ------Schemes/Training/Higher Studies) V. Library - Books ------Journals ,e-journals - E-library VI. Services - Administration/Transport/Hostels/Canteen /Security/Water/Electricity/P&T: - Hostel Maintenance ------Landscaping - Internet facility
Signature of the Principal/ Head of the Institution
71
VII. Students Activities - Extracurricular/Co-curricular/ 3181800 3556358 Sports/Cultural /extra classes VIII. Medical Expenses -Full time or otherwise 1845000 1843896 IX. Any Other, please specify ------
Latest Balance Sheet of the Society certified from CA is to be attached.
PART I – STUDENT RELATED INFORMATION
Academic Performance of Last three Years (Attach Annexure if required)
S. Course Year Sanctioned No. of Number Students Passed Pass st No. intake students of Passed with 1 Percentage admitted students Division Appeared in Board Exams Number (B/A)*100 A (B) 1st year 60 63 300 76 67 25.33 Arch 1. 2nd year 60 43 354 123 57 34.75 3rd year 60 55 335 123 70 36.72 1st year 60 63 319 99 85 31.03 Auto 2. 2nd year 60 54 384 186 154 48.44 3rd year 60 62 384 253 184 65.89 1st year 120 126 669 328 285 49.03 Civil 3. 2nd year 120 128 693 324 242 46.75 3rd year 120 132 539 350 222 64.94 1st year 60 63 323 85 74 26.32 Comp. 4. 2nd year 60 63 364 180 136 49.45 3rd year 60 55 359 224 166 62.40 1st year 60 62 338 163 131 48.22 Elect. 5. 2nd year 60 407 228 168 56.02 3rd year 60 53 388 293 198 75.52 1st year 60 63 289 74 56 25.61 ECE 6. 2nd year 60 39 353 133 94 37.68 3rd year 60 47 349 250 204 71.63 1st year 120 126 682 375 374 54.99 Mech. 7. 2nd year 120 135 845 532 454 62.96 3rd year 120 136 815 628 512 77.06 1st year 60 36 234 28 18 11.97 Plastic 8. 2nd year 60 34 273 45 33 16.48 3rd year 60 39 256 78 50 30.47
Signature of the Principal/ Head of the Institution
72
Up keep of Attendance Record of Students
S. Course / with Hours of Total Number of students Remarks No year/ Semester teaching students . from start on roll Above Above Above Above of session 75% 70% 65% 60%
1. Arch 2nd 568 55 25 30
2. Arch 4th 568 54 23 31
3. Arch 6th 568 62 15 32 5 10
4. Auto 2nd 568 55 25 30
5. Auto 4th 568 54 23 31
6. Auto 6th 568 62 15 32 5 10
7. Civil 2nd 568 107 39 68
8. Civil 4th 568 129 100 8 12 4
9. Civil 6th 568 133 98 17 10 4
10. Comp 2nd 564 55 18 37
11. Comp 4th 564 63 24 39
12. Comp 6th 564 55 20 35
13. Elect 2nd 520 58 15 58
14. Elect 4th 520 70 20 50
15. Elect 6th 520 64 16 48
16. ECE 2nd 623 54 17 37
17. ECE 4th 623 39 26 9 1 1
18. ECE 6th 623 47 24 18 1
19. Mech 2nd 560 117 41 76
20. Mech 4th 560 137 134 1 2
21. Mech 6th 560 136 135 1
Signature of the Principal/ Head of the Institution
73
22. Plastic 2nd 513 32 28 32
23. Plastic 4th 513 34 27 34
24. Plastic 6th 513 40 38 40
Details:
i. Merit position/toppers branch wise in the HSBTE Exams, if any. Yes ii. Awards awarded by the Polytechnic to the academic toppers of the Polytechnic. Yes iii. Steps taken for improving the academic results. a) Extra classes for weak students b) Expert lectures on various subjects c) Lesson plans prepared and uploaded on institute web portal d) Digital Learning resources uploaded on institute web portal iv. Conduct of extra classes for weak/ needy students (Please attach copy of time table also). Yes v. Total no. of working days observed in Semester (Please attach copy of time table also). 76 vi. Whether Alumni association is formed or not. Yes vii. Efforts made for quality teaching/ improving pedagogy/ personality development & improvement in Communication Skill of students. Yes viii. Steps taken for improving academic ambiance of the Polytechnic like land scaping, horticulture, tree plantation etc. Yes ix. Utilization of student fund for student welfare activities. Yes x. Teaching-Learning process: a. Whether Academic Calendar implemented? (Yes / No) b. Whether Teaching Aids used? (Yes / No) c. Whether Student Feedback implemented? (Yes / No) d. Any new innovation/ practice / technique adopted in teaching? (Yes / No) e. Whether Teacher’s Diary maintained? (Yes / No)
Industry Institution Interaction & Placements
(a) Mention the following details if any. i. Details of industrial tours/visits/ seminar etc. organized in the previous academic session Sr.No Date Visits /Company Branch 1 6.11.2017 Mech. Godawari Green Nariangarh Ambala City 2 7.11.2017 Mech. Godawari Green Nariangarh Ambala City
Signature of the Principal/ Head of the Institution
74
ii. Consultancy
Nil iii. Industrial Project Work Nil iv. Seminars/Conferences/Lectures with industry partnership
Sr. No. Date Branch Place/Tours 1 18.09.2017 Auto Panchkula/Chandigarh/Pinjore 2 18.09.2017 Computer Chandigarh 3 18.09.2017 Arch/U Kurukshetra 4 19.09.2017 ECE Panchkula/Chandigarh/Pinjore 5 19.09.2017 Plastic Ludhiana 6 20.09.2017 Eltx. Panchkula/Chandigarh/Pinjore 7 20.09.2017 Mech. Kasuli(H.P) 8 20.09.2017 Civil Tejewala Dam(Yamunanagar) 9 05.02.2018 Automobile Panchkula/Chandigarh/Mohali 10 05.02.2018 Plastic Panchkula/Chandigarh/Mohali 11 06.02.2018 Computer Panchkula/Chandigarh/Mohali 12 06.02.2018 Eltx. Panchkula/Chandigarh/Mohali 13 07.02.2018 Civil (A) Bhakra Nangal Dam 14 07.02.2018 Civil (B) Bhakra Nangal Dam 15 08.02.2018 Mech. (A) Panchkula/Chandigarh/Mohali 16 08.02.2018 Mech. (B) Panchkula/Chandigarh/Mohali 17 09.02.2018 Arch. Renuka ji 18 09.02.2018 Elect. Panchkula/Chandigarh/Mohali
Sr.No Date Topic of Lecture Branch
02.02.2017 Effect of mobile power signal radiation on human health using 1 spectrum analyser ECE
17.02.2017, Workshop on fire safety and First Mech. 20.02.2017 Aid Training capacity building 2 to project 24.02.2017
Signature of the Principal/ Head of the Institution
75
13.02.2017 Dot Net Technology Comp. 3
06.03.2017 Yoga health, Moral values and Arch., ECE 4 education
21.03.2017 PLC Programming Elect. PTD 5
29.03.2017 How to face interview, Moral Mech. Sec A 6 values and education
19.04.2017 How to face interview, Personality All students 7 development
27.07.2017 Fundamental rights & duties anti All trades 8 ragging
04.08.2017 Induction Programme ECE & Comp 9
07.08.2017 Induction Programme Civil & Auto 10
08.08.2017 Induction Programme Mech. & Plastic 11
11.008.2017 Induction Programme Arch. & Elect. 12
05.09.2017 Fault Finding of Android Mobiles ECE 13 and CCTV
04.10.2017 Wireless & Mobile ECE 14 communication
10.10.2017 Hadoop & Data Analytics ECE 15
26.10.2017 Health checkup camp Adesh Civil, Mech., Elect., 16 Hospital Comp
27.10.2017 Personality development and Soft Plastic 17 Skills
30.10.2017 RDBMS Comp. 18
02.11.2017 MOCK Interview Mech., Elect., & ECE 19 to 03.11.2017
Signature of the Principal/ Head of the Institution
76
08.11.2017 Designing of Buildings’ Arch. 20
08.11.2017 Personality development and Soft Mechanical ,Electrical 21 Skills
16.11.2018 “CD/DVD Player ,UPS(Fault ECE 22 Finding & Trouble shouting
26.11.2017 Essay Writing Competition All Branches 23
04.12.2017 Mock Interview Civil , Auto.& Plastic 24
(b) Student’s Placement: i. Whether training and placement cell has been established? Yes
ii. Name of the Training and Placement Officer ______Sh.Hardeep Singh Sindhu ______
iii. Qualification and Experience of Training and Placement Officer=M.Tech.( Mechanical Engg.)
iv. Number of companies which visited the Institute during the last three years for campus interviews (Please supply the list of companies) & efforts made for improving Industrial Institution Interaction. 1. 2015: 13 2. 2016: 14 3. 2017: 27
v. Number of extension lectures delivered by outside experts during the last three years 1. 2014-2015: 09 2. 2015-2016:17 3. 2016-2017:11
vi. Course wise number of students placed during the last 3 years:
Course No. of Eligible No. of Students Percentage Students Placed Batch 2012- 2013- 2014- 2012- 2013- 2014- 2012- 2013- 2014- 2015 2016 2017 2015 2016 2017 2015 2016 2017
Arch 25 14 23 13 04 09 52% 28% 39% Auto 23 28 42 08 12 19 34% 42% 45% Civil 34 36 57 07 13 22 20% 36% 38% Computer 25 35 34 10 07 02 40% 20% 5.8% Elect. 42 38 44 27 28 20 64% 73% 45% ECE 30 32 32 14 11 8 43% 34% 25% Mech 83 85 105 55 54 51 66% 63% 48% Plastic 05 22 25 04 19 19 80% 86% 76%
Signature of the Principal/ Head of the Institution
77
Extra Curricular Activities
Brief account of the activities/ achievements of the Institute during the previous year:
i. Games and sports
ANNUAL ATHLETIC MEET
The value of athletics in any institute is of immense significance and cannot be overlooked. It has a profound impact on individuals, the school as a whole, as well as the community.
Athletics is powerful and transcendent. It can bridge gaps, bring people with relatively nothing in common together, and gives many participants unbelievable, life-altering opportunities.
There are so many valuable lessons that are learned through team sports such as fair play, cooperation, sportsmanship, and passion. Pairing these athletic experiences with a rigorous academic curriculum, students are able to work on self-discipline, respect, communication skills, and collaboration--all attributes that will greatly benefit them in their lives..
GP Ambala gives due importance to this aspect and organized Annual Athletic Meet with the same flamboyant spirit and zeal. A number of events, including races, jumps and throws, were organised, witnessed by a large gathering of staff and students. The event was graced by Ms. Sharandeep Kaur Brar, IAS, Deputy Commissioner, Ambala as Chief Guest of the opening ceremony and Ms. Rajni Bala, International Hockey Player, gave away the prizes to the winners in the closing ceremony.
Highlight of the event was declaration by Ms. Sharandeep Kaur Brar, IAS, Deputy Commissioner, Ambala that the winners of the GP Ambala in Inter-polytechnic Meet to be held at GP Hisar from 22.03.2018, will be awarded Rs. 10000/- each, by the District Administration.
Achievements Boys team won SILVER MEDAL in Inter Polytechnic BADMINTON CHAMPIONSHIP (Boys) at Govt. Polytechnic, Adampur. Boys team won GOLD MEDAL in Inter Polytechnic Table Tennis (Boys) at SJP Polytechnic, Damla. The Girls team won GOLD MEDAL in Inter Polytechnic Table Tennis (Girls) at KCGPW, Ambala City. The Girls team won Gold MEDAL in INTER-POLYTECHNIC BADMINTON (GIRLS) TOURNAMENT held at KCGPW, Ambala City The Boys team won BRONZE MEDAL in INTER-POLYTECHNIC BASKETBALL (BOYS) TOURNAMENT held at Govt. Polytechnic, Hisar. The Boys team won BRONZE MEDAL in INTER-POLYTECHNIC HOCKEY (BOYS) TOURNAMENT held at C.R. Polytechnic, Rohtak. The Boys team won GOLD MEDAL in INTER-POLYTECHNIC HANDBALL (BOYS) TOURNAMENT held at Govt. Polytechnic, Adampur.
ii. Debates/ Paper presentation / Quiz Competitions etc.
These are regular feature of our institute and are conducted throughout the semester by each department.
Signature of the Principal/ Head of the Institution
78
iii. Cultural activities
ANNUAL CULTURAL & PRIZE DISTRIBUTION FUNCTION-2018
College life is one of the most exciting and important phases in anyone’s life. During this period, a student comes across several experiences and learns new things. I think here it would be right to say that importance of cultural events in college is equal to the importance of Studies. For the overall development of the students, they need to indulge in areas of interest apart from scholastic activities. It provides a student an opportunity to showcase the hidden talents possessed in themselves and along with it, it also keeps the student up-to-date with his own culture, by taking part in such activities.
The institute organized the function for providing the students a platform to give vent to their hidden talent and a colourful cultural function was the medium for this purpose. Whole of the Institution building wore a festive look and was also decorated with colourful festoon. The students participated in various competitions like Rangoli Making, Decoration, Poetical Recitation, Declamation Contest, Poster Making, Skit, Mime & Fancy Dress, Song and Dance Competitions. The Principal inaugurated the function. He exhorted the students to do their best to make the event a huge success. The Toppers were honoured on the occasion by worthy Chief guest. The curtains of the function went down with a brief speech by the Chief Guest after prize distribution ceremony.
iv. NCC/NSS
The institute has a dedicated NCC wing in the institute.
v. Students help desk
vi. Any other
PART J – FACULTY DEVELOPMENT INITIVATIES
i. Number of faculty sponsored by the institute since its inception to till date for improvement of academic qualification teaching skills etc.
ii. Number of faculty sponsored to attend training conference and other professional meeting within and outside the country and the total amount spent for this purpose by the Institute/ Trust/ Society.
26
iii. Number of faculty sponsored for industrial training.
34
iv. Does the institute possess any faculty development plan, if so give the details.
With the help of NITTTR Chandigarh We organized training staff faculty development
Signature of the Principal/ Head of the Institution
79
PART K – OTHERS 1. Please state whether the applicant is running and / or managing any other technical / professional institution which is approved in the premises on sharing basis. If so, please give the name of the programs / courses being conducted.
Guest classes of following institutes are conducted: a) Govt. Polytechnic, Hathnikund b) Govt. Polytechnic, Nanakpur c) Govt. Polytechnic, Umri
2. Whether the applicant has any Court Case in respect of violation of provisions of State Govt. / UGC or that of any other statutory body including AICTE / NCHMCT / PCI. NO 3. Has the institute ever been served show cause notice by the Board for indulging in malpractices in conduct of Board examination? If Yes, Please mention the details and its present status. NO 4. Has the institute ever been served show cause notice by the DTE / AICTE / PCI / NCHMCT / HSBTE for indulging in malpractices / violation of rules, etc? If Yes, Please mention the details and its present status. NO 5. Please submit status of compliance in respect of various conditions / guidelines as per latest AICTE approval Letter. All guidelines of AICTE are adhered to. 6. Please submit status of compliance in respect of Grievance Redressal Committee for students as notified by AICTE. Exists 7. Please submit status of compliance in respect of various conditions / guidelines as per latest DTE / State Govt. NOC. 8. Whether any deficiencies were reported by the AICTE during last two years? If Yes, Please submit the compliance of these deficiencies. These have been replied to. 9. Whether any deficiencies were reported by the DTE / HSBTE during last two years? If Yes, Please submit the compliance of these deficiencies. NO 10. Please describe briefly future plans for improvements in infrastructure / expansion in academic and other activities to fully meet the norms and standards.
Name and Signature of the Principal / Director of the Institution. Counter signed by:
(Chairman / President of the Society / Trust / Board) (Two Members on Society/Trust/Board)
Signature of the Principal/ Head of the Institution
80
Signature of the Principal/ Head of the Institution