RTC 505

ALTERNATE MOTION CARTONING

F0099

......

. . . F0103 . . . The alternate motion cartoning RTC 505 has The are withdrawn from the feeder and been designed and developed to load , opened by means of a double vacuum system located on or rolls for household use into individual both sides of the folded cartons. cartons. This system has been specifically developed for square section cartons to prevent collapsing during opening. The machine uses folded cartons pre-glued on the long side. The carton flaps are closed with hot-melt glue. For this purpose the machine is fitted with a hot-melt Cartons with 3 or 4 flap closures can be accommodated, tank, heated hoses and applicator heads.

as can 5 flap cartons if the machine is prearranged. Catalogo505Edizione 2003 There are three versions of the machine RTC 505: Also cartons with plastic, cardboard or metal tear edge - 505/350 for carton lengths up to 350 mm strip may be used. - 505/500 for carton lengths up to 500 mm - 505/620 for carton lengths up to 600 mm Cartons of different sizes can be used on the machine; special adjustment devices make the change of carton Programmable electronic cams control all the essential length, width and height quite easy and rapid. functions of the machine.

A chain with stainless steel buckets transports the rolls to Thanks to its production speed the cartoning machine the loading station where they are introduced into the RTC 505 can be connected to one or more automatic cartons. rewinders.

Two pushers mounted on linear ball bushes are used to The machine is built in accordance with "Machine load the rolls into the cartons. Standard" 89/392 and successive revisions. Description Description

- Carton length: from 210 mm up to 350 mm ( RTC 505/350 ) from 210 mm up to 500 mm ( RTC 505/500 ) from 300 mm up to 600 mm ( RTC 505/620 ) - Carton width: from 38 mm up to 65 mm - Carton height: from 38 mm up to 65 mm - Power supply : 400 V, 3 ph, 50 Hz + 0 + E - Compressed air: 0,6 – 0,8 MPa - Installed power: 6,5 kW - Net weight: approx. 1800 kg - Overall dimensions L x W x H: 4040 mm x 1700 mm x 2000 mm ( RTC 505/500 )

Technical features features Technical 4040 mm x 1500 mm x 2000 mm ( RTC 505/350 ) 4040 mm x 2000 mm x 2000 mm ( RTC 505/350 )

- RTC 505/350 up to 50 pcs/min - RTC 505/500 up to 45 pcs/min - RTC 505/620 up to 35 pcs/min

Mechanical Mechanical productivity It is Rotomac's policy to continuously develop their products. We, therefore, reserve the right to modify the information contained in this data sheet without notification.

Schemes Schemes

Via Raffaello Sanzio, 60 Phone: +39 02 33260381 http: www.rotomac.it I - 20021 Bollate (MI) – ITALY Fax: +39 02 33260391 e-mail: [email protected]