® Tools and accessories for working with plastic

Toll Free Phone 866.296.2130 • Toll Free Fax 1.800.289.2020 Order Online - www.craftics.com NFORMATION GENERAL I

Craftics Retail Packaging

Many of our popular products that are used by do-it-yourselfers are packaged for retail sale. The eye-catching cards feature handy usage instructions and other information for the consumer.

packaged supplies for: cleaning, polishing, drilling, gluing, fabricating & cutting

See back cover for details

Private-Label Pricing Any of our blister-packaged products can be packaged with your own company information. Call for details. Non-Packaged Pricing For those not requiring retail packaging, we offer bulk pricing on most of our retail-packaged products. Please call for information.

Laser Cutting Service We can supply you with laser-cut Acrylic shapes, such as diamonds, squares, triangles, or any shape you need from flat acrylic sheet. Even snowflakes! Our lasers can cut 1/8", 3/16", and 1/4” material into precise shapes with exact repeatability. Shapes are shipped with masking in place to prevent scratching. Call for pricing. Special Order Products If there are any tools or accessories for working with plastics, plastic products, or other plastics-related items that you do not find in our catalog, often we can get it for you. Call and ask! ® 2 Order Online - www.craftics.com ACRYLIC HINGES

These popular hinges feature highly polished surfaces, smooth motion, and high strength. All hinges are easily attached using Craftics Solvent Cement and Plasticators.

Craftics Hinge

Our high-quality, clear finish hinge is suitable for solvent-cement bonding. Made of high-impact Acrylic, this hinge can be used with 1/8", 3/16", or 1/4” material. This is the best hinge at the best price that you’ll find. Size is 1-1/2” wide x 1-3/4” high. Conveniently packaged in a two-pair pack.

Retail Packaged Product No. Color $ per 4-hinge Retail Pack 1106075 clear 2.50 Non-Packaged Product No. Color $ per Pair 1106075K clear .80 1106075B black 1.32 1106075W white 1.32

Craftics Snap Hinge Spring Loaded Hinge Two-piece construction enables the halves of this hinge to Molded Acrylic hinge features a built-in spring that returns easily snap together. Snap apart to remove doors or lids for lids and doors to closed position. Size is 1-1/2” wide x 1-5/8” easy cleaning or replacement. Suitable for lids, doors, or high. Not packaged for retail. other components up to about 12” x 18” for 1/8” material. Size is 1-1/2” wide x 1-1/2” high. Not packaged for retail. Product No. Color $ per Pair 1106560 clear 1.67 Product No. Color $ per Pair 1106560B black 1.67 1106466 clear .80 1106466B black .80 1106466W white .80

F abrication Manual A fully-illustrated 48-page manual for the intermediate and advanced craftsman working with Acrylic. Includes sections on bending, bonding, cutting, sawing, shaping, molding, polishing, and more. Packaged for retail sale.

Product No. $ Each 1106347 3.50

® Phone 866.296.2130 • Fax 1.800.289.2020 3 HINGES MOUNTING

lift off Hinge Black

Made of nylon, this hinge can be used interchangeably on doors hinged on either side. Hidden mounting screws (not included). High strength to size ratio, corrosion resistant, mechanically fastened. Each hinge has two parts; male and female. Screw thread 10 - 24.

Product No. Size Color $ Each 1106438 2-1/2"L x 9/16"W black 3.86

flush mounting hinge grey pvc

Made of PVC, this hinge comes assembled, opens wide to 180°. It can be heat welded, solvent welded or mechanically fastened. Works best with 1/8" thick material.

Product No. Size Color $ Each 1106444 2"L x 2-1/2"W grey 3.69

offset mounting hinge white

Made of PVC, this hinge comes assembled, opens wide to 180°. It can be heat welded, solvent welded or mechanically fastened. Works best with 1/8" thick material.

Product No. Size Color $ Each 1106462 2"L x 2-1/2"W White 3.69

b lack acrylic economy hinge

D esigned to work on 1/8", 3/16", and 1/4" materials. Molded in black acrylic, all vertical sides are beveled for a smooth appearance.

Product No. Size Color $ Each 1106544-B 1-1/2"L x 1-1/2"W black 1.13

super hinge #1

Made of rigid PVC. Made with a white web. Measures 6"L x 1"W.

Product No. Size Color $ Each 1106566-6W 6'L x 1"W White 7.49 1106562-6W 6'L x 1"W Clear 7.80

1106566-6

® 4 Order Online - www.craftics.com FLEXING HINGES

super hinge #2

Made of rigid PVC. Made with a white web. Measures 6'L x 2"W.

Product No. Size Color $ Each 1106571-6 6'L x 2"W White 10.20 1106571-6G 6'L x 2"W Grey 10.95 1106571-6

super hinge #3

Made of rigid PVC. Made with a white web. Measures 6'L x 3-1/2"W.

Product No. Size Color $ Each 1106575-6 6'L x 3-1/2"W Clear 18.88 1106575-6 1106575-6G 6'L x 3-1/2"W Grey 18.88 1106575-6W 6'L x 3-1/2"W White 18.88

f lat living hinge

Flat white living hinge with white web 6' length.

Product No. Size Color $ Each 1106441-6W 1106441-6W 6'L x 1-1/2"W White 6.93

H hinge for 3/16" material

Clear acrylic with white PVC web.

Product No. Size Color $ Each 1106577-W 1106577-W 6'L x 1-1/2"W Clear 9.00

1/4" all clear pvc living hinge

All clear PVC hinge with top groove and clear web. 1106439-6 Product No. Size Color $ Each 1106439-6 6'L x 1-1/4"W Clear 5.82

® Phone 866.296.2130 • Fax 1.800.289.2020 5 INGES FLEXING H

FLEXING HINGES

You can cut any of the hinges on this page to desired length for your project. These hinges feature a flexible center membrane with rigid solvent-cementable side pieces. A sample pack is available.

Aycr lic Super Hinge Flex Fold 2 ™ All-clear acrylic flexing hinge. (Clear sides with clear UV resistant, tapered design, all-weather continuous hinge webbing.) Not UV resistant. with clear sides and clear webbing can be heated and reset Product No. Width x Length $ Each to any angle. Bonds to Acrylic. 1106582 2" x 60" 10.84 Size is 1-7/16” wide x 49” long. 1106569-6 2" x 72" 18.63 Product No. $ Each 1106569-3 2" x 36" 11.65 1106584 14.68

40-1/2 ” and 72” lengths available by special order

Fl at Living Hinge Clear rigid vinyl side pieces with white or clear flexing center. This hinge performs well at low temperatures. Not UV resistant. Additional shipping charges apply to six-foot lengths.

Product No. Width x Length $ Each 1106441-6 1106441-3 1-1/2" x 36" 6.60 1106441-6 1-1/2" x 72" 9.24

H-STYLE Hinge This all clear, all PVC hinge is designed for 1/4” material to slide in. No adhesive or grooving required. UV- and temperature-resistant with good flexing abilities. Great for drum shields and golf cart windshields. Additional shipping charges apply to six-foot lengths. Product No. Width x Length $ Each 1106578-6 1106578-3 1-1/4" x 36" 8.57 1106578-6 1-1/4" x 72" 12.00

Living Hinge for 1/4” MateriaL Bottom-Groove Design No cementing is needed with this design. A 1/8” rib in this hinge fits a 1/8" groove in your material to hold without glue. Clear with clear flexing 1106440-6 center. Performs well at low temperatures. Additional shipping charges apply to six-foot lengths. Product No. Width x Length $ Each 1106440-3 1-1/4" x 36" 6.60 1106440-6 1-1/4" x 72" 9.24

Living Hinge for 3/16” Material Additional shipping charges apply to six-foot lengths. Product No. Width x Length $ Each 1106442-6 1106442-3 1-3/16" x 36" 6.60 1106442-6 1-3/16" x 72" 9.24 ® 6 Order Online - www.craftics.com HINGES ACRYLIC PIANO A CRYLIC PIANO HINGES

Craftics 6” Hinge

This molded DR-Acrylic hinge with beveled edges can be cut to size. Bonds with solvent cement. Width is 1-3/4”. Conveniently packaged in pairs.

Retail Packaged Product No. $ per Pair 1106556 3.70

Non-Packaged Product No. $ Each 1106556K 1.23

Open Center 6” Hinge

The open center section of this molded DR-Acrylic hinge allows it to be used instead of a pair of smaller hinges. Alignment is faster and easier than using two hinges. Width is 1-1/2”. Not suitable for cutting down.

Product No. $ Each 1106555 1.54

Piano-Style 12” Hinge

Molded DR-Acrylic hinge can be cut to desired size as needed. Width is 1-3/4”.

Product No. Color $ Each 1106382 clear 2.46 1106382B black 3.06 1106382W white 3.06

Spring Loaded 12” Hinge

Molded DR-Acrylic hinge features a built-in spring that returns lids and doors to closed position. Width is 1-3/4”. Not suitable for cutting down.

Product No. Color $ Each 1106559 clear 5.20 1106559W white 5.20

® Phone 866.296.2130 • Fax 1.800.289.2020 7 SAW BLADES HEATERS &

Plastrip Heaters This flexible silicone strip heater is suitable for occasional use. It’s quick and easy to use–just unroll, plug in, and heat and bend material up to 1/4” thick. Its flexibility makes it useful for odd shapes. Heat reaches 280° F. Packaged for retail.

Product No. Length Wattage $ Each 1106007 24” 55 51.10 1106050 48” 85 63.59

Production Heater Production-quality heater heats material up to 1/2” thick for bending. Manufactured of heavy sheet metal with enamel paint. On/Off switch with indicator light and adjustable thermostat. Maximum heat 450°, 110 volt.

Product No. H x W x L Wattage $ Each 1106078 4-1/2 "x 7" x 50" 625 579.39

R eplacement Elements Product No. Length $ Each 1106073-CAl 36” 95.72 1106078-CAl 50” 98.56

HEATING AND BENDING TIPS: Test scrap pieces first in order to get timing correct. Flipping the material you’re bending a couple of times while heating will make for a more even bend. Use a simple kitchen timer for repeating the same bend. Heat until material is soft enough to bend without applying excessive pressure. Heating too long will bubble the material. For best results, set up a jig in advance to hold your project in place while it cools.

Saw Blades for Plastics

TENRYU Plasti-Cut Saw Blades General-purpose, carbide-tipped, plastic-cutting blade makes smooth, clean, melt-free cuts in a variety of plastics. This economy blade is suitable for a wide range of applications.

Product No. Diameter/Teeth Arbor Size $ Each 1106064 7-1/4”/60 5/8” 57.20 1106065 10”/80 5/8” 89.47 1106066 12”/100 1” 115.00 1106067 14”/100 1” 160.00

Professional-Quality TENRYU Saw Blades Professional-quality for production applications, these thin-rim blades feature a narrower kerf, which feeds faster and results in less waste because less material is being removed. We have used these blades extensively and recommend them highly.

Product No. Diameter/Teeth Arbor Size $ Each 1106095 10”/80 5/8" 150.00 1106096 12”/100 1" 190.00 1106097 14”/100 1" 216.00

® 8 Order Online - www.craftics.com hing plastics Cutting & finis

Saber Saw Blades

Sold in a two-pack, these blades leave a smooth, ready-to-polish edge on Acrylic. Will also cut styrene, polycarbonate, and other plastics smoothly. Each pack contains one blade for cutting material up to 1/8” thick and one blade for material thicker than 1/8”. Packaged for retail.

Product No. Blade Length $ per 2-Pack 1106016 2-3/4” 4.70

Swivel Blade Plasticutter

The specially designed blade in this Plasticutter scores and cuts Acrylic and other plastics up to 1/4” thick. The position and angle of the hardened steel cutting edge is the key to scoring not only Acrylic, but Plexiglas®, Lucite®, styrene, PETG, and other plastics. Blade folds into handle for safe storage, but snaps in place when opened. This tool is excellent for field work, such as installing lighting panels. Packaged for retail.

Product No. $ Each 1106087 2.20

Heavy Duty Plasticutter

A larger and heavier blade than our Swivel Blade Plasticutter, this tool is easier on hands when doing repetitive cutting. This knife scribes and cuts Acrylic and other plastics up to 1/4” thick. Blade folds into handle for safe storage, but snaps in place when opened. Packaged for retail.

Product No. $ Each 1106531 9.98

Craftics Edge Scraper

Craftics’ unique four-function tool prepares edges for buffing or flame polishing. This easy-grip tool removes saw cuts and sharp corners, bevels thick material (up to 3/8”), bevels thin material (up to 1/8”), and will radius edges (up to 1/4”). Packaged for retail with complete instructions on back.

Product No. $ Each 1106020 9.76

® Phone 866.296.2130 • Fax 1.800.289.2020 9 S ADHESIVE

scigrip weld-on All adhesives shipped by ground freight only. Contact us for Material Safety Data Sheets (MSDS) and recommendations. Scigrip weld-on #3 Acrylic Fast-Set Non-flammable, water-thin, very fast setting solvent cement for bonding Acrylics. Also bonds styrene, butyrate, PETG, and polycarbonates to themselves. Product No. Size $ Each 10799 4 oz. (1/4 pint) 11.94 10300 16 oz. (1 pint) 23.28 12754 32 oz. (1 quart) 36.61 10299 128 oz. (1 gal.) 143.48 S cigrip weld-on Scigrip weld-on #40 2-Part #4 Acrylic Medium-Set Two-part, reactive, high-strength cement Non-flammable, water-thin, moderately fast setting for bonding all Acrylics to each other solvent cement for bonding Acrylics. Also bonds and to polyester, butyrate, PVC, ABS, styrene, butyrate, PETG, and polycarbonates to PETG, etc. themselves. Product No. Size $ Each Product No. Size $ Each 811330 16 oz. (1 pint) 50.47 810451 4 oz. 11.94 810432 16 oz. (1 pint) 23.28

Scigrip weld-on #4SC Same as #4. For use in California.

Product No. Size $ Each 13417 16 oz. (1 pint) 24.39

S cigrip weld-on #10 2-Part Two-component, high strength, high Scigrip weld-on #2007 viscosity structural adhesive for bonding Water thin, very fast-setting solvent cement for PVC, acrylic, ABS, and polycarbonate. bonding PVC, foamed PVC, and Kydex® to Also bonds well to steel, non-anodized themselves and to each other. aluminum, other metals, etc. Product No. Size $ Each Product No. Size $ Each 10448 16 oz. (1 pint) 27.55 10181 16 oz. (1 pint) 56.15

Scigrip weld-on #4052 Multipurpose, medium-bodied, fast-setting cement for bonding PVC, CPVC, ABS, styrene, Noryl®, and foamed PVC. Product No. Size $ Each 11138 16 oz. (1 pint) 34.22 S cigrip weld-on #1802 Thin bodied, moderately fast set. For S cigrip weld-on #2354 Clear bonding acrlics, styrene, PVC, ABS and For joining ABS and styrene to themselves. Thin Butyrate to themselves or each other. syrup, fast set, solvent type. Not for joining dissimilar materials. Product No. Size $ Each 10351 16 oz. (1 pint) 31.14 Product No. Size $ Each 830232 16 oz. (1 pint) 24.30 ® 10 Order Online - www.craftics.com ADHESIVES

OUR MOST POPULAR CEMENT

Craftics Acrylic Solvent Cement

For bonding Acrylic, our Solvent Cement is water-thin, fast-setting, and makes clear joints. Also joins styrene, butyrate, polycarbonate, and other plastics to themselves. Apply by capillary method using Craftics Plasticators and Syringes.

Retail Packaged Product No. Size $ Each 1106002 2 oz. bottle 6.72

Non-Packaged Product No. Size $ Each 1106002K 2 oz. bottle 6.72 1106010 8 oz. bottle 14.06 1106012 16 oz. bottle 19.90 2-oz. bottle packaged 2-oz. bottle 8-oz. bottle 16-oz. bottle for retail display

Craftics Thickened Cement #33

Fast-setting, medium-bodied, high-strength Acrylic cement. Also bonds rigid PVC, ABS, styrene, butyrate, and polycarbonate to themselves and each other, as well as other plastics and porous surfaces. Fills small gaps, dries clear. Tube includes an applicator tip. Packaged for retail.

Product No. Size $ per Single Pack retail 1106031 1.5 oz. tube 3.80 packaging

S cigrip weld-on Thickened Cement #16

Fast-setting, medium-bodied, high-strength Acrylic cement. Also bonds rigid PVC, ABS, styrene, butyrate, and polycarbonate to themselves and each other, as well as other plastics and porous surfaces. Fills small gaps, dries clear. (Non-Packaged)

Product No. Size $ Each 1106033 5 oz. tube 11.21

E6000 Adhesive

For permanent mounting of most materials to Acrylic, this clear adhesive with the consistency of thick syrup, provides a very strong bond. Excellent for mounting objects to be displayed on Acrylic, such as trophies. Dries clear, overnight. Not formulated for exposure to sunlight. (OK to paint over for outdoor applications.)

Product No. Size $ Each 1106061 3.7 oz. tube 8.50

SAFETY INFORMATION AND PRECAUTIONS FOR ALL ADHESIVES Th ickened Cement applicator tip These potentially hazardous adhesives are intended for use by trained professionals. Keep away from children. All of these adhesives give off fumes and evaporate Fits #33 or #16 Thickened Cement Tubes quickly. Always provide plenty of ventilation when using these adhesives. An exhaust system that moves the air from your work area to the outdoors works Product No. Quantity $ Each well. Read and follow the suggestions on the MSDS sheets and the precautions 1106031-TIP6 6 pc. 1.50 on the containers. Keep containers closed when not in use. 1106031-TIP25 25 pc. 3.75 ® Phone 866.296.2130 • Fax 1.800.289.2020 11 PPLICATORS TAPES / A

Double-Stick masking Tape Magnetic Tape This is the tape to use when stacking material sheets Make signs or sign holders with easy-to-cut strip for routing. Roll is 108 feet in length. that’s sticky on one side and magnetic on the other. Thickness is .062”. Sold by the foot. Product No. Width $ per Roll 1107321 1/2” 7.18 Product No. Width $ per Foot 1107322 1” 13.61 1107301 1” .92 1107302 2” 1.44

Cl ear Double-Stick Tape double-stick Foam Tape Thin, very sticky tape bonds permanently and has a This 1/16”-thick foam is sticky on both sides for clear, unobtrusive appearance. permanently attaching components. Easy for end-user Roll is 108 feet in length. to peel and apply. Roll is 216 feet in length.

Product No. Width $ per Roll Product No. Width $ per Roll 1107331 1” 32.84 1107311 3/4” 40.53 1107330 1/2" 15.86

Solvent Cement Applicators

Craftics Plasticators and Syringes are the choice for bonding Acrylics and plastics using the capillary method. For best results, assemble parts to be glued in their final position, then use the applicator to apply a thin line of solvent cement along the edge where the parts meet. The cement will run into the joint and bond evenly and invisibly.

Plasticators

The oval squeeze bottle is the most popular tool for applying solvent cement. Simply squeeze some air out of the partially filled bottle before inverting to avoid drips, and you’ll have an even, controlled flow. Plasticators are designed for easy needle replacement in case of clogging. Packaged for retail. For beginners, we suggest #1106108.

Product No. Bottle Size Gauge Needle/Type* $ Each 1106046 1/2 oz. 27/metal 2.42 1106003 1/2 oz. 25/metal 2.42 1106057 1/2 oz. 22/metal 2.42 1106536 1/2 oz. 16/metal 2.42 1106051 1/2 oz. 20/flex poly 3.52 1106535 1/2 oz. universal/1 ea. type 5.39

Product No. Bottle Size Gauge Needle/Type* $ Each 1106107 2 oz. 27/metal 3.08 1106108 2 oz. 25/metal 3.08 1106058 2 oz. 22/metal 3.08 1106537 2 oz. 16/metal 3.08 1106109 2 oz. 20/flex poly 4.18 1106548 2 oz. universal/1 ea. type 6.05 multi pack

1/2 OZ Applicator 2 OZ Applicator * See replacement needles on page 13 retail packaging

® 12 Order Online - www.craftics.com ICATORS SOLVENT APPL

Syringes

The Syringe applicator gives the same even capillary control as the Plasticator, but also offers calibrated accuracy. Easy to fill and to replace needles. Packaged for retail. 5 cc syringe

Product No. Syringe Size Gauge Needle/Type* $ Each 1106037 5 cc 27/metal 2.20 1106076 5 cc 25/metal 2.20 1106059 5 cc 22/metal 2.20 1106034 5 cc 16/metal 2.20 1106047 5 cc 20/flex poly 3.20 *See Replacement Needles, below, for needle lengths. 30 cc syringe Product No. Syringe Size Gauge Needle/Type* $ Each 1106035 30 cc 27/metal 3.90 1106077 30 cc 25/metal 3.90 1106060 30 cc 22/metal 3.90 retail packaging 1106038 30 cc 16/metal 3.90 1106040 30 cc 20/flex poly 5.20 *See Replacement Needles, below, for needle lengths.

NEEDLE SELECTION TIPS: Funnel The larger the needle gauge, the smaller the needle diameter. This small funnel makes • Use the 27 gauge for fine, precise flow control. filling Plasticators neat • Use the 25 gauge for general, all-around fabrication. and easy. • Use the 22 and 20 gauge for high-volume flow in production fabrication. Product No. $ Each • Use the 16 gauge for thicker adhesives. 1106062 .98

Replacement Needles

For use with Craftics Plasticators (2-oz. squeeze bottles, 1/2-oz. squeeze bottles) and Syringes (5cc and 30cc). Packaged for retail.

Product No. Gauge Length Type/Characteristics $/ Pack #/Pack 1106017 27 1-1/2” metal/smallest opening for very thin adhesives 2.20 3 1106015 25 1-1/2” metal/for thin adhesives (fabricator preferred) 2.20 3 1106025 22 1-1/2” metal/fast flowing 2.20 3 1106547 16 1” metal/larger opening for thicker liquids 2.20 3 1106070 20 2” flexible poly/for hard-to-reach places, 6.50 3 resists gumming 1106546 27, 25 variety pack/one of each type needle 4.20 5 22, 16 20

27 Ga 25 Ga 22 Ga 16 Ga 20 Ga retail packaging

® Phone 866.296.2130 • Fax 1.800.289.2020 13 POLISHING BUFFING /

H2O Flame Polishing Torch Make fire from water with this ideal flame-polishing tool. Proven technology generates perfect flame from distilled water. Electric current converts water to hydrogen/oxygen gas. No more pressurized tanks to be refilled. We highly recommend this safe, clean, economical, cost-effective tool. Very OSHA friendly. Price includes: four torch tips (#18–#23), 6’ hose, 1 quart electrolyte. 120 volt, 250 watts. Please call for more information. H x W x D Product No. $ Each 10" x 9" x 6" Safe and Cost Effective! 1106800 1966.90 Ship wt. 40 lbs

Flame polishing tips: Many fabricators prefer this fast, economical method of edge finishing. Done correctly, this process gives an excellent polished finish, whether using the water torch or conventional torch system with gas tanks and regulators. Flame polishing should never be done on edges before they are to be cemented, formed or painted, because they may crack or craze. Use plastic cleaner only after flame polishing, not before. Using a torch may take a little practice; move the flame along the edge at about 3-4" per second. Going too slowly will cause the edge to melt, distort, or burn. Going too quickly won't give a high polish.

B uffing Compounds For polishing Acrylic and other plastics with a buffing wheel. Red Tripoli is for coarse fast buff. Follow with White Rouge or Blue Rouge for finish buff. Bars weigh approximately 2 pounds each. Although White Rouge is finer, many fabricators prefer to use the Blue, Pink, Rouge for the final buffing.

Product No. Compound Type $ Each 1106755 red Tripoli 8.00 1106756 blue Rouge 11.00 1106757 White Rouge 11.18 1106767 Pink Rouge 11.07

Large Buffing Wheels Use these loose layered buff wheels with buffing compound for the perfect finish.

Product No. Diameter/Ply Hole/Arbor size $ Each 1106146K 4" sewn 5/8" 6.07 1106758 6”/40 ply 5/8” 8.01 1106759 8”/60 ply 5/8“ 15.40 1106763 10”/40 ply 1” 16.20 B uffing wheels can be stacked for wider working area. Left: This buffing set-up has three buffing wheels.

BUFFING TIPS: Prepare surface to be buffed by scraping, sanding, or skimming (router or joiner) to remove saw marks. Always apply buffing compound to the wheel, not the piece being buffed. Keep work or buffing wheel (if hand-held) in constant motion to prevent material overheating. Use minimal pressure. To clean buffing wheel: Hold the edge of a file or hacksaw blade against the wheel as it revolves to remove old dry compound. Wheels can be stacked for wider working area.

® 14 Order Online - www.craftics.com G / POLISHNG BUFFIN

Buffing Kit Remove fine scratches and polish edges from plastic surfaces with this conveniently packaged kit. Each kit contains a 4” diameter sewn cloth buffing wheel and a 2-oz. stick of buffing compound. Use with Craftics Arbor Adapter, Product Number 1106053. Packaged for retail with complete instructions on back.

Product No. $ per Kit 1106019 10.50

Aycr lic care kit Arbor Adapter This kit is ideal for routine maintenance and minor This 1/4” mandrel with 1/2” arbor fits any hand-held touch ups. drill. Use with Craftics Buffing Kit. Kit includes 2 oz. cleaner, polish Packaged for retail. and microfiber towel. Product No. $ Each Product No. $ per Kit 1106053 4.80 1106999 9.75

This kit is ideal for routine maintenance and minor touch ups Arbor adapter in use

Plastic Polishing and Scratch Removal Kit This is a handy kit with all you need to prepare edges of Acrylic and other plastic materials for gluing, to repair surface scratches, and to polish surfaces. Packaged for retail.

Kit contains: • 1/2 oz. 20/20 Plasti-Polish • Sanding Block • 1/2 oz. 20/20 Plasti-Cleaner • No. 150 Grit Wet & Dry Sandpaper • Polishing Cloth • No. 600 Grit Wet & Dry Sandpaper Product No. $ per Kit 1106001 6.20

This kit is suitable for small repair jobs; for larger projects, see our selection of larger buffing wheels and buffing compounds on Page 14.

Flap Wheels Mandrel-mounted sanding wheels are for quickly smoothing and deburring edges. The 1/4” shank fits all electric drills.

Product No. Grit $ Each 1106118 80 10.50 1106119 240 10.50 Close up

® Phone 866.296.2130 • Fax 1.800.289.2020 15 ION & RESTORAT CLEANING

Cleaning Cloths Your choice of reusable or disposable cloths to use with Craftics 20/20 Cleaner and Plasti-Polish. All these cloths will clean and polish without harming surfaces and are super absorbent. Microfiber Terry Towel An excellent reusable 16" x 16" cleaning cloth that is lint-free, with ultra-fine fibers. Machine washable.

Product No. $ Each 1106530 non-Packaged 3.25

Disposable Wipes Soft, lint-free, 12" x 13" wipes are conveniently packaged for retail in a three-pack or sold individually.

Product No. $ Each 1106533 retail Package 2.50 (3 Pack) 1106533k non-Packaged .70 (Each)

Microfiber Smooth Towel This reusable 16" x 16" cloth has ultra-fine fibers and a smooth surface for lint-free cleaning. Machine washable.

Product No. $ Each 1106534 retail Packaged 3.90 1106534k non-Packaged 3.35

Aycr lic restoration kitS

Product No. $ Per Kit Included 1106993 9.99 Kit includes 1 each 600 grit, 1000 grit & 4000 grit restoration paper 1/2 oz. bottle 20/20 polish 1/2 oz. bottle 20/20 cleaner Microfiber towel

Product No. $ Per Kit Included 110699 14.20 600 Grit acrylic restoration 3 pack. Sheet size 8-1/4” x 11”

Product No. $ Per Kit Included 1106996 14.20 1000 Grit acrylic restoration 3 pack. Sheet size 8-1/4” x 11”

Product No. $ Per Kit Included 1106997 14.20 4000 Grit acrylic restoration 3 pack. Sheet size 8-1/4” x 11”

Product No. $ Per Kit Included 1106998 7.14 Acrylic restoration paper assortment pack. 1 each grit, 600, 1000, 4000. Sheet size 8-1/4” x 5-1/2”

® 16 Order Online - www.craftics.com HING SUPPLIES CLEANING & POLIS

Cleaners and Polishes Simply the best, Craftics 20/20 Plasti-Cleaner and 20/20 Plasti-Polish are used by professional fabricators and plastic distributors worldwide to ensure their products have a polished, high-shine finish all the time. Unlike many cleaners and restorers that are chemical-based and often leave a film residue on plastic surfaces, these Craftics 20/20 formulas are water-based, so they leave a smooth, clear surface finish without streaking, smearing or filming.

Novus #1 Craftics 20/20 Plasti-Cleaner Plastic Clean & Shine Simply the best plastic cleaner. Used by professional Gently cleans without scratching and fabricators and plastic distributors worldwide to clean leaves a smooth finish that resists finger and glaze in one operation. Will not scratch or marks and fogging. Silicone-based haze surfaces. Cleans quickly without streaking formula contains no abrasives. Comes or residue. Anti-static properties resist dust and in a spray bottle. fingerprints.

Product No. Size $ Each Product No. Size $ Each 1106083 8 oz. 8.16 1106024 2 oz. Flip Top Bottle 3.81 1106021 8 oz. pump spray 6.08 1106063 32 oz. trigger spray 16.14 Novus #2 1106018 1 gallon bottle 37.91 Fine Scratch Remover 1106071 5 gallon jug 157.02 For lightly damaged fixtures, this formula removes fine scratches, abrasions and haziness from acrylic Craftics 20/20 Plasti-Polish and plastic surfaces. Repeated use Removes fine scratches, haziness, and abrasions can also restore the original look from most plastic surfaces. Follow up with 20/20 to faded and discolored surfaces. Plasti-Cleaner for a shiny clean surface. Required as a final step when using Novus #3 heavy scratch remover. Product No. Size $ Each Comes in a squirt bottle. 1106376 2 oz. bottle 2.76 1106377 8 oz. squirt bottle 5.14 Product No. Size $ Each 1106380 32 oz. bottle 12.01 1106379 8 oz. 11.86

Novus #3 Heavy Scratch Remover Cleaning Tips: Restore older, deeply damaged Never use paper towels to clean acrylic and plastic fixtures with this plastics as they will scratch highly effective, scratch-removing surfaces; always use a clean, formula. Complete your refurbishing soft cloth when cleaning Acrylic with the required Novus #2 fine and other plastics. Do not use scratch remover. Comes in a squirt ammonia-based cleaners or bottle. petroleum-based solvents, as they will craze and degrade Product No. Size $ Each plastic surfaces. 1106378 8 oz. 12.87

Mask-Off

Remove old, stubborn paper masking from Acrylic and other sheet materials with this product. Quick acting, soak and peel. Must ship by ground freight.

Product No. Size $ Each 1106008 8 oz. 5.16 1106022 32 oz. 9.70

® Phone 866.296.2130 • Fax 1.800.289.2020 17 DRILL BITS

drill bits for plastic Plexipoint Drill Bit

The professional's choice for use with plastics, these drill bits are available in a wide range of sizes. 80° point, 0° rake. Not packaged for retail.

Product No. Bit Size $ Each 1106600 1/16” 9.21 Special-order 1106601 5/64” 9.21 1106602 3/32” 9.21 drill bits, 1106603 7/64” 9.21 including 1106604 1/8” 9.81 1106605 9/64” 10.30 numbered, 1106606 5/32” 10.42 metric, and 1106607 11/64” 11.51 1106635 3/16” 11.99 lettered bits are 1106608 13/64” 12.48 1106609 7/32” 13.58 available – call for 1106638 15/64" 14.17 more information. 1106610 1/4” 14.50 1106611 17/64” 15.99 1106612 9/32” 16.59 1106613 19/64” 18.17 1106614 5/16” 19.50 1106615 21/64” 20.83 1106616 11/32” 22.89 1106617 23/64" 24.71 1106618 3/8” 25.44 1106619 25/64” 28.71 1106620 13/32” 29.19 1106621 27/64” 31.37 1106622 7/16” 32.34 1106623 29/64” 35.13 1106624 15/32” 36.58 1106625 31/64” 38.40 * 29-piece kit 1106626 1/2” 38.65 1106636 17/32” 45.18 1106627 9/16” 47.84 1106628 5/8” 52.81 1106629 11/16” 92.86 1106630 3/4” 95.94 1106631 13/16” 108.56 1106632 7/8” 118.27 1106633 15/16” 132.92 1106634 1” 144.24 1106637 29-piece kit* 555.66 1106639 8-piece kit** 825.53

** 8-piece kit * 29-piece kit = 1 each from 1/16" to 1/2" ** 8-piece kit = 1 each from 9/16" to 1"

® 18 Order Online - www.craftics.com DRILL BITS

Drill Bits for Plastic

Standard drill bits don’t work very well with plastics; they tend to chip and grab the material, making it difficult to drill a clean, even hole. All of our specially designed bits will give you a smooth, even hole without grabbing, melting, or chipping. Pro Series Drill Bits

An excellent bit for drill presses, this series comes in a nice selection of sizes. Very useful for stacked sheets. Shank diameter is the same as the drill bit, except for the 5/16", 3/8", 7/16", and 1/2”, which have a 1/4” shank. All bits have a 60° point, 0° rake. Packaged for retail.

Product No. Bit Size $ Each 1106538 1/8” 3.70 1106539 5/32” 4.64 1106540 3/16” 4.92 1106541 1/4” 5.80 1106542 5/16” 7.76 1106543* 3/8” 9.40 1106544* 7/16” 12.26 1106545* 1/2” 13.20 1106641* 8-piece kit** 60.00

* 1/4" shank T he Pro-Series ** Kit includes one of each size. is the choice for drill presses!

8-piece kit

® Phone 866.296.2130 • Fax 1.800.289.2020 19 DRILL BITS

drill bits for plastic

retail packaging

Plas-Drill Bits

These special drill bits for plastic produces clean, smooth, chip-free holes in Acrylic and other plastics. Excellent for hand-held drills. Shank diameter is the same as the drill bit, except for the 7/16” and 1/2”, which have a 3/8” shank. All bits have a 90° point, 0° rake. Packaged for retail.

Product No. Bit Size $ Each 1106006 1/8” 3.36 1106026 5/32” 3.54 1106005 3/16” 3.70 1106004 1/4” 4.90 1106027 5/16” 6.60 1106028 3/8” 8.00 1106029 7/16” 13.28 1106030 1/2” 16.08 1106640 8-piece kit* 55.00

*Kit includes one of each size.

Diamond Dust Drill Bits

A special coating on these production-use bits gives a long-lasting cutting edge that’s excellent for drill press applications and stack drilling. Good for use on extruded material especially. Limited sizes. 60° point, 0° rake.

Product No. Bit Size $ Each 1106549 1/8” 2.30 1106550 3/16” 3.00 1106551 1/4” 4.00 1106552 3-piece kit* 8.00

*3-piece kit ® 20 Order Online - www.craftics.com saw ep bits, Hole countersinks, st

Drill Bits for Plastic Drill Bit Countersinks Used with our Plexipoint drill bits or other plastic drill bits, these easy-to-use countersink attachments create perfectly flush countersunk holes for assembly screws time after time. Two hex-socket screws hold them securely in place and adjust for depth to a variety of lengths along the drill bit. All have an 82° cutting angle and are heat-treated for long life.

Product No. Cutting Diam. Drill Hole Size OAL $ Each 1106775 5/16” 1/8” 7/8” 13.67 1106776 3/8” 3/16” 7/8” 13.69 1106777 1/2” 1/4” 7/8” 15.01

Countersink BITS Make a great finish to a project by countersinking the screw holes. This smooth cutting, V-shaped bit will create an 82° bevel on bolt and screw holes. The 1/4" shank fits all drills.

Product No. Diameter $ Each 1106659 7/16” 22.08 1106658 9/16” 25.79

Step Drill Bits Designed for thin plastic or metal sheet (up to 1/8”), these step drill bits provide a convenient, time-saving way to drill multiple-sized holes without having to stop and continually change out drill bits (for example, the smaller size replaces up to 13 individual drill bits). Made of high-speed steel for sharp cutting and long life.

Product No. 1106798 1106799 Qty Holes 13 8 Diam Range 1/8" - 1/2" 9/16" - 1" Increments 1/32" 1/16" OAL 3" 2-13/16" Step Depth 1/8" 1/8" Shank 1/4" 1/2" Point Type self-starting pilot hole

$ Each 66.19 105.46 1106799 1106798

Hole Saws with Arbor Adapter Create clean, smooth holes in acrylic, plastics, wood or other materials with these high-speed steel saws. They’re ideal for fabricating displays and assemblies that use extruded rod and tube (see pages 38 & 39). All sizes include a built-in arbor adapter for convenient and economical use. M3 cutting edge; 4/6 variable pitch.

Product No. Cutting Diameter $ Each 1107500 1-1/4” 29.29 110750 1-1/2” 36.09 1107502 1-3/4” 44.34 1107503 2” 47.34

® Phone 866.296.2130 • Fax 1.800.289.2020 21 ITS ROUTER B

Carbide Router Bits for Plastics by Onsrud

These router bits are specially designed for plastics and will perform far better than standard bits intended for wood. For more information, call and speak with our factory-trained advisor. The solid carbide bits that we offer provide long tool life and are cost effective for long-running jobs. Use the shortest cutting edge length needed for your job. Excess length of the tool causes excessive vibration and degrades edge quality. Hard plastics refers to materials such as cast Acrylic, Melamine, nylon, PVC, and vinyl. The term soft plastics indicates ABS, polycarbonate, polyethylene, expanded PVC, polypropylene, HDPE, polystyrene, UHMW, and extruded Acrylic. NOTE: Film-masked material is less abrasive to carbide bits than paper-masked material.

CNC router table router pin router

HP H ard Plastic HP SP Single flute SP Soft Plastic

Single Flute-Straight HP SP

Product No. CED CEL SHANK OAL $ Each 61-041 1/8 5/16 1/4 2 24.46 61-042 1/8 1/2 1/4 2 26.21 Designed to combine the fast free cutting of "O" flute 61-062 3/16 5/8 1/4 2 26.21 geometry with the tool life available from solid carbide 61-081 1/4 3/8 1/4 2-1/2 26.25 particularly in small diameters. Polycarbonate, polyethylene, 61-082 1/4 3/4 1/4 2-1/2 27.38 polypropylene, polystyrene, PVC, extruded acrylic, HDPE, 61-083 1/4 3/4 1/4 3-1/4 31.00 UHMW and hard plastic. 61-084 1/4 1-1/4 1/4 4 35.08 61-085 1/4 1 1/4 3-1/4 32.42

S lingle F ute Upcut SpiRal O Flute SP

Product No. CED CEL SHANK OAL $ Each 63-750 1/16 1/4 1/4 2 24.75 63-762 1/8 1/2 1/4 2 24.75 Designed to produce a smooth finish in soft plastics. Single 63-763 1/8 1/2 1/8 2 22.25 "O" flute features increased clearance resulting in maximum 63-768 3/16 5/8 1/4 2 24.75 chip flow and eliminates chip rewelding. (SP): HDPE, 63-774 1/4 3/8 1/4 2 23.63 HIPS, UHMW, ABS, polycarbonate, PE, polystyrene, 63-775 1/4 3/4 1/4 2-1/2 24.75 polypropylene, acetal, acrylic, PET and solid surface HELIX 63-776 1/4 1-1/4 1/4 3 29.33 ANGLE = 21°.

ROUTING TIPS: A step up from the simple table router system, a pin-router will increase productivity and safety. These machines have an overhanging arm with a pin that fits into your template or pattern. A vacuum system holds your template to the work piece. Depressing the foot pedal brings the router up from below the table and the pin down into the template. You then simply follow the pattern with the pin in the groove of your template. You can also set up the pin router with a fence to allow “skimming” of your straight edges to remove saw-cut marks and roughness prior to gluing or polishing. CAUTION: Working with exposed router bits as described can be hazardous. Use appropriate safety guards and template designs.

CED=Cutting Edge Diameter sd=Shank Diameter CEL=Cutting Edge Length oal=Overall Length

® 22 Order Online - www.craftics.com ROUTER BITS

S lingle F ute Upcut SpIRal O Flute HP

Product No. CED CEL SHANK OAL $ Each 63-700 1/16 1/4 1/4 2 24.75 63-701 1/16 1/4 1/8 2 22.25 63-710 1/8 1/4 1/4 2 24.75 63-712 1/8 1/2 1/4 2 24.75 Designed to provide a smooth finish in hard plastics with 63-713 1/8 1/2 1/8 2 22.25 upward chip removal. (HP): Acrylic, nylon, PVC, 63-717 3/16 3/8 1/4 2 24.75 polycarbonate and solid surface. 63-718 3/16 5/8 1/4 2 24.75 63-724 1/4 3/8 1/4 2 23.63 63-725 1/4 3/4 1/4 2-1/2 24.75 63-726 1/4 1-1/4 1/4 3 29.33 63-733 3/8 1-1/8 3/8 3 42.75 63-740 1/2 1-5/8 1/2 3-1/2 98.46

S lingle F ute Upcut SpIRal O Fl ute for Aluminum

Product No. E C D CEL SHANK OAL $ Each High speed cutters for machining aluminum sheet and block 63-602 1/16 1/4 1/8 1-1/2 24.58 material. These tools are optimized for use on high-speed 63-606 1/8 1/4 1/4 2 30.46 CNC mills, high speed machining centers and CNC routers. 63-610 1/8 1/2 1/4 2 32.33 Aluminum plate and single/multi sheet aluminum HELIX 63-614 3/16 3/8 1/4 2 32.33 ANGLE = 22°. 63-620 1/4 3/8 1/4 2 32.25 63-622 1/4 3/4 1/4 2-1/2 34.96

S lingle F ute Downcut Spiral O Flute HP SP

The polished flute allows for razor sharp cutting edge and Product No. E C D CEL SHANK OAL $ Each easy chip evacuation. The tool is available in a down cut 64-000 1/16 1/4 1/8 2 29.08 spiral for improved part holding. (HP): Acrylic, nylon, PVC, 64-012 1/8 1/2 1/4 2 33.04 poly carbonate and solid surface (SP): HDPE, HIPS, 64-016 3/16 3/8 3/16 2 35.00 UHMW, ABS, polycarbonate, PE, polystyrene, 64-025 1/4 3/4 1/4 2 37.38 polypropylene, acetal, acrylic, PET and solid surface 64-026 1/4 1-1/4 1/4 3 51.88 HELIX ANGLE = 21°. 64-033 3/8 1-1/8 3/8 3 77.79 S lingle F ute Downcut Spiral O Flute HP

Product No. E C D CEL SHANK OAL $ Each Designed to provide a smooth finish in hard plastics with 62-713 1/8 1/2 1/8 2 22.25 upward chip removal. (HP): Acrylic, nylon, PVC, poly 62-725 1/4 3/4 1/4 2-1/2 24.75 carbonate and solid surface (SP): HDPE, HIPS, UHMW, 62-726 1/4 1-1/4 1/4 3 29.33 ABS, polycarbonate, PE, polystyrene, polypropylene, acetal, 62-733 3/8 1-1/8 3/8 3 42.75 acrylic, PET and solid surface HELIX ANGLE = 21°. 62-763* 1/8 1/2 1/8 2 22.25 * soft plastic

S lingle F ute Upcut Spiral O Flute HP SP

Product No. E C D CEL SHANK OAL $ Each The polished flute allows for razor sharp cutting edge and 65-000 1/16 1/4 1/8 2 29.08 easy chip evacuation. The tool is available in a down cut 65-010 1/8 1/4 1/4 2 31.33 spiral for improved part holding. (HP): Acrylic, nylon, PVC, 65-012 1/8 1/2 1/4 2 31.33 polycarbonate and solid surface (SP): HDPE, HIPS, UHMW, 65-018 3/16 5/8 1/4 2 43.33 ABS, polycarbonate, PE, polystyrene, polypropylene, acetal, 65-023 1/4 5/8 1/4 2 39.79 acrylic, PET and solid surface HELIX ANGLE = 21°. 65-025 1/4 7/8 1/4 2-1/2 46.13 65-026 1/4 1-1/4 1/4 3 56.38

CED=Cutting Edge Diameter sd=Shank Diameter CEL=Cutting Edge Length oal=Overall Length

® Phone 866.296.2130 • Fax 1.800.289.2020 23 ITS ROUTER B

HP H ard Plastic HP SP double flute SP Soft Plastic

Double Fl ute Upcut Spiral o Flute HP SP Product No. E C D CEL SHANK OAL $ Each 52-622 1/4 3/8 1/4 2-1/2 21.17 Low helix geometry designed to cut soft and hard plastic with a 52-624 1/4 3/4 1/4 2-1/2 22.63 smooth finish and upward chip flow. (HP): Acrylic, nylon, PVC, 52-638 3/8 1 3/8 3 43.88 polycarbonate and solid surface (SP): extruded acrylic, nylon, 52-650 1/2 1-1/8 1/2 3-1/2 76.21 ABS, PE, acetal, PET, HDPE, UHMW, poly HELIX ANGLE = 22°.

Double Flute Up cut Sp iral SP Product No. E C D CEL SHANK OAL $ Each 52-240 1/8 1/2 1/4 2 20.21 52-261 3/16 3/4 1/4 2-1/2 22.21 52-280 1/4 7/8 1/4 2-1/2 22.79 Designed for routing where upward chip removal, tool rigidity, 52-287 1/4 1-1/8 1/4 3 26.25 long life and high quality finish is desired. (SP): extruded acrylic, 52-300 5/16 1-1/8 5/16 3 39.08 nylon, ABS, PE, acetal, PET, HDPE, UHMW, poly HELIX 52-320 5/16 1-1/8 5/16 3 39.08 ANGLE = 30°. 52-362 1/2 1-1/4 1/2 3-1/2 65.25

D ouble Flute Straig ht HP Product No. E C D CEL SHANK OAL $ Each 56-041 1/8 1/4 1/4 2 22.42 56-061 3/16 3/8 1/4 2 22.42 56-062 3/16 5/8 1/4 2 23.46 Designed specifically to rout harder, more rigid plastics. Foam, 56-082 1/4 3/4 1/4 2-1/2 24.67 fiberglass, phenolic, acrylic, nylon, PVC, ABS, acetal and solid 56-122 3/8 7/8 3/8 2-1/2 46.50 surface. 56-162 1/2 1 1/2 3 73.21

D ouble Flute V B ottom Carbide Tipped HP SP Product No. E C D CEL SHANK OAL $ Each 37-52* 3/8 3/4 3/8 2-1/2 60.25 37-61 1/2 13/32 1/4 1-25/32 16.00 Carbide Tipped Two Flute Up-shear V Flute For V-Grooving 37-62 3/4 1/2 1/2 2-1/8 36.88 or Beveling 90° for Plastics, Solid Surface, Composites, 37-63 1 27/32 1/2 2-27/32 44.63 Laminated and Veneered Materials. * solid carbide

D ouble Flute Downcut Spiral o Flute HP SP Product No. E C D CEL SHANK OAL $ Each 57-623 1/4 3/8 1/4 2-1/2 21.63 Designed to cut plastic with a smooth finish and downward 57-625 1/4 3/4 1/4 2-1/2 23.13 chip flow. Acrylic, nylon, ABS, PE, acetal, PET, HDPE, UHMW, 57-637 3/8 1 3/8 3 44.75 polycarbonate and solid surface HELIX ANGLE = 10-11°.

T -Slot Router Bit This router bit cuts a clean channel slot allowing you to wall-mount the wood and acrylic bases. Please note you must have one router bit for each material type to ensure a clean cut. Product No. CED CEL Neck Shank OAL Material $ Each 90-06 3/8” 3/8” 3/16” 1/4” 1-5/8” Solid Carbide 38.50 ROUTING TIPS: The #28 series carbide router bits are ideal for routing plastics using templates. Using a vacuum pump attached with a hose to your pre-made template, you can quickly rout out any shape. The template should have a rubber gasket so that the vacuum holds it down on your work piece. Mount the router under a work table with the bit sticking up through the table. The ball bearing on the top of the router bit will follow along the template to cut out your shape. To cut a stack, use double-stick tape to hold pieces together. (See Page 12 for tape.) The ball bearing bits are also used to rout off excess material and produce even corners on boxes, bins, and cases. Just assemble your project with a slight overhang and use the bit to rout an even edge.

CED=Cutting Edge Diameter sd=Shank Diameter CEL=Cutting Edge Length oal=Overall Length ® 24 Order Online - www.craftics.com ROUTER BITS

B All Earing-TIPPED ROUTER BITS FROM ONSRUD

D ouble Flute Corner Round with Single Bearing Product No. RADIUS CED CEL SHANK OAL $ Each 42-01 3/16 7/8 1/2 1/4 2 31.29 42-02 1/4 1 7/16 1/4 1-29/32 32.08 42-06 1/2 1-1/2 3/4 1/4 2-5/32 36.38 Quarter round profile tools feature up shear geometry for 42-07 1/2 1-1/2 3/4 1/2 2-11/16 42.88 better finishes. BEARING KIT 28-78. 42-08 3/4 2 1-1/32 1/2 3 61.54

D ouble Flute Flush Trim with Bearing SP Product No. E C D CEL SHANK OAL $ Each 28-50 3/8 1 1/4 2-3/4 22.04 28-51 3/8 1/2 1/4 2-1/4 22.04 28-53 1/2 1/2 1/4 2 22.04 Designed to provide a smooth finished edge on dense, 28-54 1/2 1 1/2 3-1/4 24.38 abrasive and laminated materials. A ball bearing guide 28-57* 1/2 1 1/4 2-3/4 33.38 assists free cutting action. Excellent for hand-fed 28-64 1/2 2 1/2 4-1/4 29.58 applications. (SP): extruded acrylic, nylon, ABS, PE, * Triple Flute acetal, PET, HDPE, UHMW, poly.

D ouble Flute Cham fer with Single Bearing Product No. BEVEL CEL SHANK OAL $ Each 29-51 45 deg 1/2 1/4 2 30.75 Carbide Tipped Two Flute Straight 45 Degree Chamfer 29-52 45 deg 1/2 1/2 2-1/2 32.33 Bit w/Bearing. 29-53 25 deg 3/8 1/4 1-7/8 21.17

D ouble Flute, Double Bearing Trim Product No. E C D CEL SHANK OAL $ Each Designed to provide a smooth finished edge on dense, 28-20 1/4 3/4 1/4 3 40.92 abrasive and laminated materials. A ball bearing guide 28-25 1/2 1-1/8 1/2 4 113.67 assists free cutting action. Excellent for hand-fed applications. (SP): extruded acrylic, nylon, ABS, PE, acetal, PET, HDPE, UHMW, poly.

HP H ard Plastic HP SP triple flute SP Soft Plastic

Th l ree F ute Low He lix Finisher-Upcut HP Product No. E C D CEL SHANK OAL $ Each Designed for perfect balance and ultra-smooth finish 60-241 1/4 7/8 1/4 3 37.13 over a wide speed range with a upward chip flow. Plastic, 60-249 1/2 1-1/8 1/2 3-1/2 80.63 composite plastic and solid surface HELIX ANGLE = 10°. 60-253 1/2 1-5/8 1/2 4 89.13

Th l ree F ute Low He lix Finis her-Downcut HP Designed for perfect balance and ultra-smooth finish over Product No. E C D CEL SHANK OAL $ Each a wide speed range with a downward chip flow. Plastic, 60-242 1/4 7/8 1/4 3 37.13 composite plastic and solid surface HELIX ANGLE = 10°. 60-250 1/2 1-1/8 1/2 3-1/2 80.63 Rl ep acement Bearing Kits We can special order any Product No. $ Each product Onsrud Cutter Bearing kits include bearing, 28-78 6.04 washer and locknut or screw 28-79 6.04 makes. Please call us for as required. 28-89 6.04 more information.

CED=Cutting Edge Diameter sd=Shank Diameter CEL=Cutting Edge Length oal=Overall Length ® Phone 866.296.2130 • Fax 1.800.289.2020 25 YLIC SHAPES SOLID ACR

all shapes are highly polished void-free solid acrylic

Clear Acrylic Discs All of these flat laser-cut Acrylic discs are Clear Acrylic Spheres made of 1/8” material, and are shipped Clear Acrylic with masking still attached to prevent Product No. Diameter $ Each Half Spheres scratching. Different thicknesses are

1106704 1/16” 12.32/1000 available upon request. Product No. Diameter $ Each 1106226 1/8” 2.50/100 1105051 3/8” .14 1106228 3/16” .06 Product No. Diameter $ Each 1105052 1/2” .24 1106229 1/4” .08 1105091 3/8” .14 1105053 5/8” .45 1106232 3/8” .25 1105092 1/2” .18 1105054 3/4” .58 1106234 1/2” .32 1105013 5/8” .20 1105055 7/8” 1.32 1106236 5/8” .56 1105014 3/4” .25 1105056 1” 1.54 1106705 11/16” .77 1105016 1” .28 1105144 1-1/8” 2.78 1106237 3/4” .88 1105138 1-1/4” .39 1105123 1-1/4” 2.93 1106238 7/8” 1.14 1105093 1-1/2” .48 1105124 1-1/2” 3.63 1106239 1” 1.47 1105139 1-3/4” .90 1105145 1-3/4” 9.86 1106706 1-1/8” 2.46 1105142 2” .92 1105146 2” 15.41 1106127 1-1/4” 3.08 1105143 2-1/2” 1.04 1105147 2-1/4” 29.27 1106707 1-3/8” 5.54 Ready-to-use discs are a quick 1105148 2-1/2” 40.04 1106128 1-1/2” 5.54 addition for displays 1105149 3” 83.16 1106243 1-3/4” 9.86 1106129 2” 16.42 1106245 2-1/4” 34.18 1106246 2-1/2” 54.74 1106708 2-3/4” 75.00 1106709 3” 80.50

Clear DISPLAY ICE

Product No. Qty. $ Each Diamond-Edge Clear 1107011 1 Lb. 19.80 Aycr lic Cubes & Blocks Tumbled Clear For a very high quality look, we offer larger Acrylic Cubes solid Acrylic cubes that are diamond-edge The solid Acrylic cubes are tumble m custo polished with crisp, sharp edges. polished. tting we offercu BS Product No. H x W x D $ Each laser JO Product No. Square $ Each LARGE 1105159 1-1/2” x 3” x 3” 14.81 1105022 1/4” .21 FOR 1105160 1-1/2” x 4” x 4” 23.13 1105023 3/8” .25 1105131 3” x 3” x 3” 38.53 1105024 1/2” .33 1105157 3” x 3” x 4” 53.34 1105018 5/8” .45 1105158 3” x 3” x 6” 77.06 1105025 3/4” .68 1105130 4” x 4” x 4” 98.78 1105019 1” 1.33 1105154 4” x 8” x 8” 333.03 1105127 1-1/4” 2.34 1105128 1-1/2” 5.96 CUSTOM SIZES AVAILABLE! 1105129 2” 14.72 ® 26 Order Online - www.craftics.com NNECTORS BUMPERS & CO

Self-Stick Bumpers Easy-to-apply all-clear polyurethane bumpers make great feet for any project; they protect surfaces from scratching, keep objects from sliding, and are very unobtrusive. Self-stick bumpers are sold by the pad. Buy by the case for a 10% discount. Cylindrical Product No. Ref. # Dia. Height # Per Pad $ Per Pad 1106452 bS1 1/2” - .500 9/64 - .140 200 13.38 1106454 bS5 1/2” - .500 1/16 - .060 200 11.40 1106464 bS24 13/16” - .810 1/8 - .120 72 11.28

SQUARE Product No. Ref. # Dia. Height # Per Pad $ Per Pad 1106510 bS20 13/32” - .400 7/64 - .100 242 14.06 1106511 bS29 25/31” - .780 1/4 - .250 98 16.52

Hemispherical Product No. Ref. # Dia. Height # Per Pad $ Per Pad 1106453 bS2 7/16” - .440 13/64 - .200 242 15.26 1106455 bS7 5/16” - .335 3/32 - .085 450 19.57 1106456 bS12 3/8” - .375 5/32 - .150 200 14.62 1106457 bS40 1/4” - .250 1/16 - .062 578 24.28 1106481 bS15 5/8” - .620 5/16 - .310 128 20.69

Self-Stick Felt Discs & Sheet Adhesive-backed felt discs come 100 discs per peel-off sheet. The individual felt sheet (#1106519) can be cut with scissors to any size or shape you desire. DISCS Product No. Color Dia. x Thickness $ per 100 1106512 black 1/2” x 1/16” 3.24 1106513 brown 1/2” x 1/8” 3.54 SHEETS Product No. Color W x L x Thickness $ Each 1106519 black 9” x 12” x 1/16” 3.02

Panel Connectors C onnectors for 1/8" material Create cube displays with our clear or chrome connectors. All Connectors are designed for 1/8" material and are produced are 1” long and designed for use with 1/8" & 3/16” material. in PVC. All are 1" long Clear polycarbonate panel connectors. Product No. Description $ Each Product No. Description $ Each 1106042 1106720 2-way 90° .52 1106042 2-way 90° .46 1106721 2-way 60° .29 1106043 3-way 90° .52 1106722 3-way 90° .58 1106044 4-way 90° .58 1106043 1106723 4-way 90° .67 1106044 3-way 120° .55 Chrome panel connectors and accessories. Product No. Description $ Each 1106130 2-way 90° 1.44 1106131 3-way 90° 1.74 1106044 1106132 4-way 90° 1.87 1106133 hinge (1) 3.33 1106134 hasp (1 set) 1.94 1106130 1106130 1106130

1106134 1106130 1106131 1106132 1106133 ® 1106130 1106130 Phone 866.296.2130 • Fax 1.800.289.2020 27 OMPONENTS ACRYLIC C Acrylic Components Glue on these accessories for a quick and easy finish to projects. Use with Craftics Solvent Cement and Applicators.

Po lycatch door closure A unique hexagonal polycarbonate door catch with flexing action that holds doors and lids securely. Product No. H x W x D $ Each 1106532 3/4" x 3/4" x 3/8" .68 spring-action Door Catch This clear two-part polycarbonate catch has spring action for secure closing. Product No. H x W x L $ Each 1106447 7/16" x 5/8" x 15/16" .70 Sawtooth Hanger Attachment Attaches with solvent cement to facilitate wall mounting. Molded clear Acrylic. Product No. H x W x D $ Each 1106593 3/4" x 2-1/4" x 1/8" .46 Universal Keyhole/slotted hangers This clear Acrylic molded attachment cements on to provide wall mounting. Product No. H x W x D $ Each 1106445 1" x 7/8" x 1/4" .34 1106433 1" x 7/8" x 3/16" .38 1106446 1106445 1106433 1106446 7/8" x 3/4" x 3/16" .31 (Large) (Small) Mag-Catch™ Magnetic Door Catch This high-impact, clear acrylic magnetic door catch requires no direct metal to magnet contact so it can be easily bonded with solvent right onto plastic doors, lids and panels without the need for screws or rivets. Holds doors securely, yet opens with just a slight pull. Bonds to Acrylic, ABS, styrene and polycabonate with Craftics Solvent Cement. 1106507 1106506 Product No. Size Glue Surface $ Each 1106506 Small 7/8” base 1.20 1106507 large 1-3/4” base 1.35 Sonnex Acrylic Corner Reinforcing Blocks The slim design of this clear high-impact Acrylic block almost invisibly increases joint and construction strength. Tapered ends help prevent dirt and particle build-up in corners and make for easy cleaning. Save money by being able to use thinner sheet material, while getting the strength of thicker material. Tapered on both ends or one end only for butting into corners.

R etail Packaged Product No. H x W x L Metric Tapered Ends $ per 12 Pack 1106478 3/16" x 5/16"" x 3" 80mm both 3.78 1106483 3/16" x 5/16"" x 1-3/4" 45mm both 3.32 1106484 3/16" x 5/16"" x 1-3/4" 45mm single 3.32 NON-PACKAGED Product No. H x W x L Metric Tapered Ends $ Each 1106478K 3/16" x 5/16"" x 3" 80mm both .31 1106483K 3/16" x 5/16" x 1-3/4" 45mm both .25 1106484K 3/16" x 5/16" x 1-3/4" 45mm single .25 Patent & Des. Reg. Nos. USA, UK, & Australia 6131762-2334020-741686-134897-135184 Corner Block Corner Brace Reinforce corners and panels either Another style for reinforcing corners horizontally or vertically with this and panels, also made of clear Acrylic. clear Acrylic block. Product No. H x W x L $ Each Product No. H x W x L $ Each 1106450 3/4" x 1-1/4" x 1-1/4" .30 1106451 3/4" x 1/4" x 1-7/8" .34 ® 28 Order Online - www.craftics.com PONENTS ACRYLIC COM

Knobs and Pulls Add a professional look to your fixtures with these convenient, attractive acrylic pulls and knobs. All available in clear, black or white acrylic and attaches easily with Craftics Solvent Cement. Craftics Acrylic Knobs Available in two sizes, these true-to-style acrylic knobs bring a contemporary look to your fixtures. Also available in black (B) or white (W) acrylic.

Product No. Top Diam. x Base Diam. x H $ Each 1106504 1" x 1/2" x 3/4" .40 1106504B 1" x 1/2" x 3/4" .40 1106504W 1" x 1/2" x 3/4" .40 Aycr lic HANDLES 1106505 1-1/4" x 5/8" x 1-1/8" .54 Product No. Height x W $ Each 1106048 3/8" x 2" 1.26 1106048W 3/8" x 2" 1.26 Universal Glue-On Handle 1106048B 3/8" x 2" 1.26 Our large-sized J-Extrusion also makes ideal handles 1106049 7/16" x 2-3/4" 1.40 and pulls. Offering ample finger space for opening 1106049W 7/16" x 2-3/4" 1.40 and closing doors and drawers, they are pre-cut to 1106049B 7/16" x 2-3/4" 1.40 4” long. Attach with Craftics Solvent Cement and use 1106052 1/2" x 3-1/2" 1.54 with either their long (7/8”) or short side face (1/2”). 1106052W 1/2" x 3-1/2" 1.54 Available in longer, cuttable lengths. Clear acrylic only. 1106052B 1/2" x 3-1/2" 1.54

Product No. Length x Depth $ Each 1107250 4" x 5/8" .64 CRAFTICS Acrylic PULLS

Chicago Post & Screws These sleek-looking pulls are recessed on the bottom so fingers can slide underneath them for easy pulling. Clear plastic post and screws. Smoothly threaded for easy Also available in a black (B) or white (W) acrylic. assembly and breakdown. All are 1/4” diameter. Product No. Height x W $ Each Product No. Length $ Each 1107248 3/8" x 2" .44 1107233 1/4” .24 1107248W 3/8" x 2" .44 1107234 3/8” .26 1107249 7/16" x 2-3/4" .50 1107235 1/2” .28 1107249W 7/16" x 2-3/4" .50 1107249B 7/16" x 2-3/4" .50

Aluminum Post & Screws Threaded all-aluminum fasteners unscrew for breakdown. All are 1/4” diameter.

Product No. Length $ Each 1107240 3/16” .27 1107241 1/4” .20 1107242 3/8” .24 1107243 1/2” .28

Clear Post & Screws Screw Clip/Shelf Support Easy-to-use post and screw sets press together Insert these polycarbonate supports to secure to permanently affix your assembly pieces. shelves in your displays without adhesive. Ultra-clear butyrate. All are 1/4” diameter. Also fastens light-duty pieces for easy disassembly. Includes a 1/4 -20 Flathead Product No. Length $ Each set stainless steel screw, 3/4" long. 1107230-K 1/4” .10 1107231-K 3/8” .13 Product No. $ Each 1107232-K 1/2” .14 1106679 .84

® Phone 866.296.2130 • Fax 1.800.289.2020 29 ES TURNTABL

turntables Solid Turntables These solid, clear turntables incorporate an internal metal ball bearing system for quiet, smooth-turning operation. The 3” through 9” diameter turntables are made of styrene; the 9", 12" and 14” diameter turntables are made of PTEG. All turntables are also available in a black (B) or white (W) for the same price.

Product No. Diameter $ Each 1106598 3” 2.09 1106598B 3” 2.09 1106598W 3” 2.09 1106103 4-1/4” 2.45 1106103B 4-1/4” 2.45 1106103W 4-1/4” 2.45 1106598 1106104 5-1/2” 3.70 1106104B 5-1/2” 3.70 1106104W 5-1/2” 3.70 1106126 8-1/2" 6.60 1106126B 8-1/2" 6.60 1106126W 8-1/2" 6.60 1106105 9” 7.25 1106105B 9” 7.25 1106105W 9” 7.25 1106106 9" x 12" Sloping 11.99 1106106B 9" x 12" Sloping 11.99 1106106W 9" x 12" Sloping 11.99 1106740 12” PETG 17.90 1106740B 12” PETG 17.90 1106102 14" PETG 17.12 1106103

1106740 1106126

1106106 1106102 ® 30 Order Online - www.craftics.com TURNTABLES

Open-Center Ring Style

Product No. OD x ID $ Each 1106099 4-1/4” x 1-5/8” 1.74 1106099 1106099B 4-1/4” x 1-5/8” 1.74 1106100 5-1/2” x 2-3/4” 2.64 1106100B 5-1/2” x 2-3/4” 2.64 1106101 8-1/2” x 5-3/4” 4.99 1106101B 8-1/2” x 5-3/4” 4.99

1106100 1106101

Steel Turntables

These all-metal turntables have electro-zinc coated, lubricated steel ball bearings. The 3” and 4” turntables have mounting holes, but acrylic fixtures and displays can be mounted using either E6000 or IPS #10 adhesives.

Product No. Description Maximum Fixture Diam. Wt. Capacity $ Each 1107403 3” Square up to 18” 200 lbs. 1.55 1107404 4” Square 18-25” 300 lbs. 2.15 1107406 6-1/4” Round 15-30” 500 lbs. 4.30 1107407 12" Round 20" and greater 1000 lbs. 9.18

1107406 1107403 1107404

Square base Turntables

These solid, clear turntables incorporate an internal metal ball bearing system for quiet, smooth turning operation. Made of styrene and available in clear, black or white.

Product No. Size Color $ Each 1105103 4-1/4" Dia. x 5-1/2" Base Clear 2.74 1105103B 4-1/4" Dia. x 5-1/2" Base black 2.74 1105103W 4-1/4" Dia. x 5-1/2" Base White 2.74 1107104 5-1/2" Dia. x 5-1/2" Base Clear 3.61 1105104B 5-1/2" Dia. x 5-1/2" Base black 3.61 1105104W 5-1/2" Dia. x 5-1/2" Base White 3.61

® Phone 866.296.2130 • Fax 1.800.289.2020 31 S URNTABLE T KS HASPS & LOC

Pin-Style Hasp A removable pin enables this two-piece hasp to reverse for either corner or flat mounting.

Product No. W x L $ Each 1106448 1" x 2-1/4" 1.76 1106448-B 1" x 2-1/4" 1.76 1106448-W 1" x 2-1/4" 1.76

1106435 & 1106501 Flat Styles Mini-Hasps These clear acrylic mini hasps are an easy and economical way to secure your displays. Available in flat (horizontal) or corner (vertical) mounting styles. Each has a 1/4” diameter padlock shackle hole (see Craftics padlocks below).

Product No. Mounting Style H x W x L $ per Set 1106502 1106435 Flat 1/2” x 1/2” x 1/2” .74 Corner Style 1106501 Flat 3/4” x 3/4” x 7/8” 1.06 1106502 Corner 7/16” x 3/4” x 1-3/8” 1.20

Cam Locks A simple way to add security, chrome-plated locks include cam and two keys. All locks of the same size are keyed alike.

Product No. Style $ Each MINI 1106792 Standard 2.19 STANDARD 1106793 Mini 2.00

Padlocks Each lock comes with two keys.

Product No. Finish Shackle Width $ Each 1106791 Chrome 3/8” .94 1106790 brass 7/16” 2.35

Sliding Door Lock Another security option, this lock comes with two keys. Attaches with a set screw located on the back. Fits up to 1/4”-thick material.

Product No. Length $ Each 1106795 4-3/4” 2.50 Keyed Alike Sliding lock in use 1106796 4-3/4" 1.50 Keyed Different

Easel Back Here is a two-piece unit that cements to the back of a picture frame. It opens for table-top support or folds flat for shipping and wall hanging. Suitable for small frames up to 5 x 7”.

Product No. $ Each 1106437 1.01 ® 32 Order Online - www.craftics.com RS / SHOE SHELF LITERATURE HOLDE

Injection-Molded Brochure Holders Economical alternative to fabricated units. All dimensions are inner diameter (ID). standard letter size 8-1/2" x 11" models standard tri-fold 4" x 9" MODELS

1106655 1106653 1106654 1106652 Prod. No. Sheet Size $ Each Prod. No. Sheet Size $ Each Prod. No. Sheet Size $ Each Prod. No. Sheet Size $ Each 1106655 8-1/2" x 11" 9.72 1106653 8-1/2" x 11" 7.87 1106654 4" x 9" 3.28 1106652 4" x 9" 3.98

1106661 1106662 I njection-molded Business Card Holder Economical countertop display for business cards. Outdoor Brochure/Flyer Holder Holds 50-60 business cards. For 8-1/2" x 11" sheets, these molded holders have a weather-resistant lid. Product No. H x W x D Style $ Each 1106661 3” x 2-5/16” x 3/4" horizontal .68 Product No. H x W x D $ Each 1106662 3” x 2-5/16” x 3/4" Vertical 3.08 1107010 13" x 9-1/4" x 2" 9.00

Injection-Molded Close-up Slatwall Shelves Shelf Divider of swivel head Economical styrene shelves with or Make adjustable sized pockets in without sign channel. Straight shelf J-racks and other displays with adjustable Faceout style. Sign channel is 1”. these handy dividers. Fits 1/8” shoe shelf with toe stop Product No. W x D $ Each material. Clear injection molded slatwall shelf. Available in 1106645 8" x 4" 1.34 Product No. H x W $ Each clear only. Adjusts to different directions from wall. 1106642 10" x 4" 1.93 1106649 1-1/4" x 1-3/4" .50 Product No. $ Each 1106646 12" x 6" 3.01 1106650 4.23 ® Phone 866.296.2130 • Fax 1.800.289.2020 33 CESSORIES E HOLDER AC LITERATUR

Glue-On Pockets Our molded, clear acrylic glue-on pocket allows you to quickly and easily create custom displays wherever you need them. Simply attach with Craftics Solvent Cement (see pages 10 & 11). Note: All dimensions are inner dimensions (ID).

Gl ue-on Business Card Pockets With a special built-in rib design to keep business cards from falling forward, this injection-molded pocket is an easy add-on to a variety of fabricated products.

Product No. Style H x W x D $ Each 1106284 universal front 7/8” x 3-5/8” x 7/8” .70 1106284 1106449 Straight front 1” x 4” x 7/8” 1.00

Glue-On Literature Pockets Product No. Style H x W x D $ Each 1106281 Curved front 4” x 4-1/8” x 1" 1.39 1106283 Curved front 5-7/8” x 4-3/16” x 1-1/2” 2.06 1106285 Square front 4-15/16” x 4-3/8” x 1-1/2” 1.00 1106286 Curved front 3-3/4” x 6-3/16” x 1-1/2” 1.87 (horizontal Postcards) 1106280 Curved front 9-3/4” x 8-3/4” x 1-7/8” 6.99 1106285 1106281 (for 8-1/2” x 11” sheets)

Suction Cups Indispensable for dozens of uses, our new suction cups are now stronger, clearer and UV-stable. Available in small, medium or large sizes, and plain or with a hook.

Plain Product No. Diameter Style Weight Capacity $ Each 1106458 1-1/4” Plain 1 lb. .37 1106459 1-1/4” With hook 1 lb. .49 1104158 1-7/8” Plain 3 lbs. .55 1104159 1-7/8” With hook 3 lbs. .62 With hook 1106460 2-1/2” Plain 7 lbs. .77 1106461 2-1/2” With hook 7 lbs. .86

Pegboard Adapter Cements on to plastic or acrylic products allowing you to hang products from pegboard. High-impact clear acrylic. Product No. H x W $ Each 1106111 1" x 1-1/8" .35

Pegboard Hook Use our clear polycarbonate hooks to quickly, easily and economically display your hanging products on pegboard or slatwall displays. We have the most sizes at the best prices! Also available in black or white.

Product No. Length $ Each 1106498 2” .39 1106499 3” .42 1106500 4” .44 Round Clip hook Use these molded polyester hooks with our J-Bar and U-Bar (See page 40).

Product No. Size $ Each 1106429 3” L x 3/4" x 9/16"W .22

® 34 Order Online - www.craftics.com HOOKS & HOLDERS

Hooks and Hook Holders H ere is a selection of hooks that you can glue on directly or use with a hook holder. The hook holder makes it easy to slide hooks in and out, reducing damage in shipping and making replacement more economical. All hooks are made of clear PETG. 3/8” Top Rib Hook The rib design of this hook increases the amount of weight that it will hold. Product No. Length Base Size Uses Holder $ Each 1106469 1” 5/8” sq. 1106477 .09 1106470 2” 5/8” sq. 1106477 .15 1106488 3” 3/4” sq. 1106485 .18

3/8” Flat Hook Product No. Length Base Size Uses Holder $ Each 1106467 1-1/2” 5/8” sq. 1106477 .08 1106468 2” 5/8” sq. 1106477 .09 1106120 2-1/2” 3/4” sq. 1106485 .14 1106121 3” 3/4” sq. 1106485 .14 1/8” Round Hook Product No. Length Base Size Uses Holder $ Each 1106112 1” 1/2” sq. 1106475 .09 1106113 1-1/4” 1/2” sq. 1106475 .09 1106114 1-1/2” 5/8” sq. 1106476 .09 1106115 1-3/4” 5/8” sq. 1106476 .09 1106116 2” 5/8” sq. 1106476 .10 1106117 3” 3/4” sq. 1106485 .17 Hook Holders G lue-on holders make it easy to slide hooks out for shippng or replacement. All are 3/16” thick. Product No. H x W Fits Hooks $ Each 1106475 5/8" x 3/4" 1106112, 1106113 .14 1106476 3/4" x 7/8" 1106114, 1106115, 1106116 .14 1106477 3/4" x 7/8" 1106467, 1106468, 1106469, 1106470 .14 1106475 1106476 1106477 1106485 1106485 7/8" x 7/8" 1106120, 1106121, 1106488, 1106117 .14 Clip Hooks Use these molded polyester hooks with our J-bar and U-bar (See page 40). Just clip on and slide to position. 3/8” Ribbed Clip Hook Product No. Length Base Size $ Each 1106490 1” 3/4” sq. .15 snap in hook 2" 1106471 1-1/2” 3/4” sq. .18 1106472 2” 3/4” sq. .21 Product No. Length $ Each 1106479 3” 3/4” sq. .30 1106429 3” .22 1106436 4” 3/4” sq. .32

SERRATED GLUE-ON Hook 1/8” Clip Hook s latwall hook adapter uses With 1/2” sq. Base Size With 3/4” sq. Base Size P/ N 1106488, 1106120,1106121, 1106117

Product No. Length $ Each Product No. Length $ Each Product No. Material $ Each 1106509 1-1/2” .18 1106473 1” .12 1106401 Styrene .71 1106474 1-1/2” .18

Pictured with Flat Hook ® Phone 866.296.2130 • Fax 1.800.289.2020 35 S ACCESSORIE EYEWEAR

EYEWEAR DISPLAY ACCESSORIES

"t he ExtreME clip" eyeglass display Pegboard / slatwall style The Extreme Clip has an adjustable 2-position feature. Use eyeglass holder at the first notch to display eyeglasses horizontal or second notch to display eyeglasses at a slight angle. Great to display This economy eyeglass holder has built-in peg hooks for wrap around or curved eyewear. convenient, quick application on pegboard or slatwall. Product No. Dimensions $ Each Product No. Size $ Each 1106668 4-1/2"W x 1-3/4"L x 1/2"D 2.31 1106402 2-1/2" 3.91 1106403 3" 4.10 1106404 3-1/2" 4.28

"t he clip" eyeglass display The Clip is ideal for creating quick eyewear displays for more standard nose bridge - clear conventional reading type glasses. The versatile design also allows the ability to be adjusted for that perfect merchandising This versatile acrylic nose bridge allows the ability to secure angle. to flat acrylic surfaces from either the front or rear to create Product No. Dimensions $ Each either front or rear facing eyewear displays. 1106667 4-1/2"W x 1-3/4"L x 1/2"D 2.31 Product No. $ Each 1106672 2.80

XL J-Bar economy Nose Bridge This economy styrene nose bridge glues onto 5/8" diameter XL J-Bar Eyewear Tray rod to produce various eyewear displays and also allows the ability to secure to flat acrylic surfaces from either the front This 3.5" long extra large J-bar offers the ability to create or rear to create either front or rear facing eyewear displays. quick, beautiful counter-top eyewear displays. Product No. Material $ Each Product No. $ Each 1106674 Acrylic .71 1107250 .64

End Cap s latwall style rod-style nosebridge Wall mount or bond to Nose Bridge acrylic slatwall pieces This economy styrene This economy compact with solvent cement. eyeglass holder has a styrene nose bridge 5/8” rod slips into built-in slatwall glues onto 5/8" the cap and stays in adapter for diameter rod to place with side screw convenient, produce various provided. quick eyewear displays. Clear Acrylic. application Product No. $ Each Product No. Dimensions $ Each on slatwall. 1106676 .50 1106671 1”OD x 5/8”ID x 7/8”H 1.54 Product No. $ Each 1106677 1.60 ® 36 Order Online - www.craftics.com EXTRUSIONS

Special shape rods Extra shipping charges apply to six-foot lengths. acrylic tri-prism Rod

Clear acrylic extruded tri-prism rod. Sold in 6' lengths.

Product No. Diameter $ Each 1106716-6 1-3/8” x 72" 12.92

acrylic quad-prism Rod

Clear acrylic extruded quad-prism rod. Sold in 6' lengths.

Product No. Diameter $ Each 1106718-6 1-3/8” x 72" 11.55

frosted acrylic round Rod

Frosted acrylic extruded rod. Sold in 6' lengths.

Product No. Diameter $ Each 1106749-6 3/8” x 72" 4.62 1106752-6 3/4" x 72" 17.87

1/8" H-Channel

Clear acrylic extruded H-channel. Accepts 1/8" thick acrylic to provide a professional looking seam. Sold in 6' lengths.

Product No. Length $ Each 1106589-6 72" 4.23

angled Side u-Channel

Clear acrylic extruded U-shaped bar. This channel has one of the outside walls slightly angled to provide a slick contoured look without affecting the inside channel layout. Sold in 6' lengths.

Product No. Dimensions $ Each 1102004-6 3/16" x 5/8" x 72" 4.23

® Phone 866.296.2130 • Fax 1.800.289.2020 37 nS extrusio

Extruded Rod and Tube All the extruded rods and tubes shown here are sold in three-foot lengths and in six-foot lengths. Extra shipping charges apply to six-foot lengths.

Round Acrylic Rod Half-Round Acrylic Rod

Product No. Diam. $ Each Product No. Diam. $ Each 1106157-3 1/16” x 3' .19 1106211-3 3/8" x 3' 1.74 Square Acrylic Rod 1106157-6 1/16” x 6' .27 1106211-6 3/8" x 6' 2.46 1106158-3 1/8” x 3' .39 1106212-3 1/2” x 3' 2.32 Product No. Diam. $ Each 1106158-6 1/8” x 6' .54 1106212-6 1/2” x 6' 3.30 1106265-3 1/8” x 3' .31 1106159-3 3/16” x 3' .65 1106213-3 5/8” x 3' 3.68 1106265-6 1/8” x 6' .43 1106159-6 3/16” x 6' .92 1106213-6 5/8” x 6' 5.22 1106266-3 3/16” x 3' .70 1106160-3 1/4” x 3' .91 1106214-3 3/4” x 3' 5.31 1106266-6 3/16” x 6' .98 1106160-6 1/4” x 6' 1.28 1106214-6 3/4” x 6' 7.56 1106220-3 1/4” x 3' 1.24 1106161-3 5/16” x 3' 1.52 1106681-3 1” x 3' 9.41 1106220-6 1/4” x 6' 1.75 1106161-6 5/16” x 6' 2.15 1106681-6 1” x 6' 13.32 1106221-3 3/8” x 3' 2.84 1106162-3 3/8” x 3' 2.18 1106221-6 3/8” x 6' 4.01 1106162-6 3/8” x 6' 3.08 1106222-3 1/2” x 3' 5.21 1106163-3 7/16” x 3' 4.20 1106222-6 1/2” x 6' 7.36 1106163-6 7/16” x 6' 5.93 1106223-3 5/8” x 3' 8.15 1106164-3 1/2” x 3' 3.70 1106223-6 5/8” x 6' 11.51 1106164-6 1/2” x 6' 5.28 1106224-3 3/4” x 3' 12.88 1106165-3 9/16” x 3' 6.90 1106224-6 3/4” x 6' 18.18 1106165-6 9/16” x 6' 9.74 1106225-3 1” x 3' 21.64 1106166-3 5/8” x 3' 5.68 1106225-6 1” x 6' 30.55 1106166-6 5/8” x 6' 8.01 Thin-Wall Acrylic Tube 1106682-3 1-1/4” x 3' 33.84 1106167-3 3/4” x 3' 7.74 1106682-6 1-1/4” x 6' 47.77 Extruded thin-wall Acrylic tube has 1106167-6 3/4” x 6' 10.93 1/16” standard wall thickness. 1106168-3 7/8” x 3' 11.47 Isosceles Right Angle 1106168-6 7/8” x 6' 16.19 Product No. OD x ID $ Each 1106169-3 1” x 3' 14.98 Triangle Rod 1106187-3 1/4" x 1/8" x 3' .79 1106169-6 1” x 6' 21.15 1106187-6 1/4" x 1/8" x 6' 1.12 Product No. 2-Sides $ Each 1106170-3 1-1/8” x 3' 21.22 1106188-3 5/16" x 3/16" x 3' 1.08 1106728-3 1/4” x 3' .74 1106170-6 1-1/8” x 6' 29.95 1106188-6 5/16" x 3/16" x 6' 1.52 1106728-6 1/4”x 6' 1.05 1106171-3 1-1/4” x 3' 20.62 1106189-3 3/8" x 1/4" x 3' 1.27 1106731-3 1” x 3' 11.85 1106171-6 1-1/4” x 6' 29.11 1106189-6 3/8" x 1/4" x 6' 1.80 1106731-6 1” x 6' 16.73 1106173-3 1-1/2” x 3' 35.86 1106190-3 1/2" x 3/8" x 3' 1.86 1106173-6 1-1/2” x 6' 50.63 1106190-6 1/2" x 3/8" x 6' 2.63 1106174-3 1-3/4" x 3' 66.58 1106193-3 5/8" x 1/2" x 3' 2.38 Eq uilateral 1106174-6 1-3/4" x 6' 94.00 Triangle Rod 1106193-6 5/8" x 1/2" x 6' 3.37 1106301-3 2” x 3' 86.97 1106195-3 3/4" x 5/8" x 3' 2.94 1106301-6 2” x 6' 122.78 Product No. All Sizes $ Each 1106195-6 3/4" x 5/8" x 6' 4.15 1106302-3 2-1/2" x 3' 155.30 1106518-3 1/2” x 3' 3.27 1106197-3 7/8" x 3/4" x 3' 3.45 1106302-6 2-1/2" x 6' 219.24 1106518-6 1/2” x 6' 4.61 1106197-6 7/8" x 3/4" x 6' 4.87 1106303-3 3" x 3' 223.63 1106521-3 1” x 3' 12.97 1106686-3 1" x 7/8" x 3' 3.97 1106303-6 3" x 6' 315.71 1106521-6 1”x 6' 18.31 1106686-6 1" x 7/8" x 6' 5.61 ® 38 Order Online - www.craftics.com EXTRUSIONS

Specialty Extrusions Aycr lic Tube Clear Acrylic only. Additional shipping Standard wall thickness for our extruded Acrylic tube is 1/8”. charges apply to six-foot lengths. Product No. OD x ID $ Each Spiral Rod 1106683-3 3/8" x 1/8" x 3' 1.10 Product No. Dia. x L $ Each 1106683-6 3/8" x 1/8" x 6' 3.26 1106215-6 3/8" x 6' 1.75 1106191-3 1/2" x 1/4" x 3' 3.18 1106216-3 1/2” x 3' 3.72 1106191-6 1/2" x 1/4" x 6' 4.49 1106216-6 1/2” x 6' 5.21 1106192-3 1/2" x 3/16" x 3' 5.12 1106217-6 5/8" x 6' 2.98 1106192-6 1/2" x 3/16" x 6' 7.23 1106194-3 5/8" x 3/8" x 3' 4.25 square Tube 1106194-6 5/8" x 3/8" x 6' 5.99 Product No. OD x ID x L $ Each 1106196-3 3/4" x 1/2" x 3' 4.26 1106514-3 1/2” x 3/8" x 3' 2.87 1106196-6 3/4" x 1/2" x 6' 6.01 1106514-6 1/2” x 3/8" x 6' 4.08 1106684-3 7/8" x 5/8" x 3' 6.39 1106517-3 1” x 7/8" x 3' 5.91 1106684-6 7/8" x 5/8" x 6' 9.02 1106517-6 1” x 7/8" x 6' 8.27 1106685-3 1" x 3/4" x 3' 5.94 1106685-6 1" x 3/4" x 6' 8.38 1106687-3 1-1/4" x 1" x 3' 9.57 Spiral Tube - Acrylic Thinwall 1106687-6 1-1/4" x 1" x 6' 13.51 Product No. OD x ID x L $ Each 1106689-3 1-3/8" x 1-1/8" x 3' 11.66 1106712-3 5/8” x 3/8” x 3' 3.49 1106689-6 1-3/8" x 1-1/8" x 6' 16.53 1106712-6 5/8” x 3/8” x 6' 4.88 1106203-3 1-1/2" x 1-1/4" x 3' 10.87 1106203-6 1-1/2" x 1-1/4" x 6' 15.22 Drilled and Tapped 1106690-3 1-5/8" x 1-3/8" x 3' 16.55 1106690-6 1-5/8" x 1-3/8" x 6' 23.36 Acrylic Rods 1106691-3 1-3/4" x 1-1/2" x 3' 13.83 1106691-6 1-3/4" x 1-1/2" x 6' 19.52 B uild any style knock-down display with these 1106692-3 2" x 1-3/4" x 3' 14.69 3/4”-diameter rods that are drilled and ready to 1106692-6 2" x 1-3/4" x 6' 20.74 assemble. Included with each rod ordered are 1106693-3 2-1/4" x 2" x 3' 18.07 the 8-32 flathead screws for assembly. Tapped 1106693-6 2-1/4" x 2" x 6' 25.51 rods enable you to ship displays flat and make it 1106694-3 2-1/2" x 2-1/4" x 3' 20.22 1106694-6 2-1/2" x 2-1/4" x 6' 28.54 easier to replace broken parts. Each length can be 1106695-3 2-3/4" x 2-1/2" x 3' 21.47 ordered with one or both ends drilled. 1106695-6 2-3/4" x 2-1/2" x 6' 30.31 1106696-3 3" x 2-3/4" x 3' 24.26 1106696-6 3" x 2-3/4" x 6' 34.54 1106697-3 3-1/4" x 3" x 3' 37.69 1106697-6 3-1/4" x 3" x 6' 53.21 Single End Drilled 1106698-3 3-1/2" x 3-1/4" x 3' 36.18 Product No. Length $ Each 1106698-6 3-1/2" x 3-1/4" x 6' 51.08 1107200 4” 4.76 1106699-3 3-3/4" x 3-1/2" x 3' 39.51 1107201 6” 5.68 1106699-6 3-3/4" x 3-1/2" x 6' 55.77 1107202 8” 6.64 1106700-3 4" x 3-3/4" x 3' 41.58 1107203 10” 7.56 1106700-6 4" x 3-3/4" x 6' 58.71 1107204 12” 8.48 1106701-3 4-1/2" x 4-1/4" x 3' 46.95 1106701-6 4-1/2" x 4-1/4" x 6' 66.28 1106702-3 5" x 4-3/4" x 3' 51.95 1106702-6 5" x 4-3/4" x 6' 73.34 1106703-3 6" x 5-3/4" x 3' 73.38 double END Drilled 1106703-6 6" x 5-3/4" x 6' 103.60 Product No. Length $ Each 1106732-3 7" x 6-3/4" x 3' 152.99 1107210 4” 5.91 1106732-6 7" x 6-3/4" x 6' 215.98 1107211 6” 6.83 1106733-3 8" x 7-3/4" x 3' 189.70 1107212 8” 7.81 1106733-6 8" x 7-3/4" x 6' 267.81 1107213 10” 8.71 1106734-3 10" x 9-3/4" x 3' 293.46 1107214 12” 9.63 1106734-6 10" x 9-3/4" x 6' 414.30 ® Phone 866.296.2130 • Fax 1.800.289.2020 39 nS extrusio

Extruded Shapes For ease and economy of shipping, all the extruded bars and strips shown here are sold in three-foot lengths. Any of them may be ordered in six-foot lengths. Additional shipping charges apply to six-foot lengths. W-Bar Clear extruded acrylic “W” shape can be used to adapt products for slatwall display. The horizontal gluing surface makes for strong adhesion. Also available in DR (impact resistant) material for extra strength, if needed. Product No. Length/ft. $ Each Product No. Length/ft. $ Each 1106591-3 3 4.10 1106586-3 3 4.82 1106591-6 6 5.82 1106586-6 6 6.84 DR (Impact resistant) Z-Bar This is a very popular acrylic extrusion for creating slatwall products. Vertical gluing surface. Available in DR (impact resistant) material for extra strength, if needed. Product No. Length/ft. $ Each Product No. Length/ft. $ Each 1106590-3 3 3.66 1106587-3 3 7.32 1106590-6 6 5.22 1106587-6 6 9.66 DR (Impact resistant) J-Bar Use J-bar to create displays for earring cards or display hooks. Craftics clip hooks fit this J-bar (See page 35). Product No. Length/ft. $ Each Product No. Length/ft. $ Each Clear Acrylic black Acrylic 1106592-3 3 1.93 1106592-3B 3 3.61 1106592-6 6 2.76 1106592-6B 6 5.10 U-Bar Extruded U-shaped bar accommodates any of the clip hooks on Page 33. U-Bar is also good for building channels for sliding door panels. Product No. Length/ft. $ Each 1106588-3 3 2.65 1106588-6 6 3.78 Rectangular Bar Product No. width/height $ Each Product No. width/height $ Each 3' lengths 6' lengths ¼ 1106522-3 3/8" x 1/8" 1.01 1106522-6 3/8" x 1/8" 1.43 1106523-3 5/5" x 1/8" 1.68 1106523-6 5/8" x 1/8" 2.37 ½ 11065641-3 1/2" x 1/4" 2.73 11065641-6 1/2" x 1/4" 3.85 1106526-3 1" x 1/4" 5.40 1106526-6 1" x 1/4" 7.63 1106524-3 1" x 5/8" 15.05 1106524-6 1" x 5/8" 21.25 Step Strip Clear acrylic extruded step strip. Accommodates inserts up to 1/8" thick Perfect for creating interchangeable letter signs. Product No. length/ft. $ Each 1106719-3 3 1.99 1106719-6 6 2.82 Large Display J-Bar Excellent for creating eyewear displays or an easy way to create handles. ⁷/₈ Product No. length/ft. $ Each ½ 1106772-3 3 8.69 1106772-6 6 12.17 ⁵/₈ Clip edge retainer Grip clip shelf 2" lip for 1/4" thick glass or acrylic. Use upside down to adhere product labels, UPC codes, descriptions, etc. Product No. length/in. $ Each 1106575 47-3/4 8.71 ® 40 Order Online - www.craftics.com SORIES FRAME ACCES

Standoff Systems

NEW PRODUCT

Standoff systems are designed to hold acrylic display signage in an attractive, contemporary, professional appearance. The system can also be used to secure and display glass panels, architectural panels, canvas banners, photograph display setups, artwork displays and an Product No. Finish Dia. x Length $ Each endless variety of other materials. 1109080 Brushed Stainless Steel 1/2" x 1/2" 1.79 1109082 Brushed Stainless Steel 1/2" x 3/4" 2.00 1109084 Brushed Stainless Steel 5/8" x 3/4" 2.35 Additional sizes and finishes are 1109086 Brushed Stainless Steel 5/8" x 1" 2.59 1109088 Brushed Stainless Steel 3/4" x 3/4" 2.91 available by special order - Call 1109090 Brushed Stainless Steel 3/4" x 1" 3.49 Customer Service. 1109092 Brushed Stainless Steel 1" x 3/4" 3.82 1109094 Brushed Stainless Steel 1" x 1" 4.56

NEW PRODUCT featureS

♦ Easy Installation - 2 minutes! ♦ Supports Frames 7" to 36" Wide No Hooks, Wires or Wall Studs Needed ♦ Trackmaster® ♦ Frames Hang Level, Straight, Secure TrackMaster® is a unique, patented picture hanger that eliminates ♦ Side to Side Frame Adjustments the problems associated with hanging pictures and mirrors with No Special Tools Needed hooks and wires. These unique products are exclusive to ♦ TrackMaster®.

Product No. Size $ Each Preferred by Pro & TMWF5 For wood frames 7" to 24" wide 3.59 Do-It-Yourself Installers TMWF8 For wood frames 10" to 36" wide 4.59 TMMF5 For metal frames 7" to 24" wide 3.59 TMMF8 For metal frames 10" to 36" wide 4.59 TMPWF For wood frames 7" to 24" wide 3.99 (For more information visit hangframes.com).

® Phone 866.296.2130 • Fax 1.800.289.2020 41 ASES DISPLAY B

Display Bases Create your own display cases and trophies with our acrylic and walnut bases. Or use them to create distinctive wall plaques with the T-Slot Router Bit (see page 24).

Aycr lic Bases

Thick, solid acrylic display bases are a stylish alternative to wood. Available in square, and round styles, each features beveled edges to keep display case covers securely in place. Custom-sized acrylic bases are available upon request - please call for details.

Square (1/2”-thick material) Round (1”-thick material) Product No. W x D $ Each Product No. W x D $ Each 1107113 3” x 3” 4.93 1107122 5” 15.71 1107114 4” x 4” 6.90 1107123 7” 37.49 1107115 5” x 5” 9.88 1107124 9” 39.89 1107116 6” x 6” 11.56 1107117 7” x 7” 14.34 1107118 8” x 8” 18.27

Walnut Bases

Made of solid 3/4”-thick, high-quality walnut. The notched edges keep the display case cover neatly in place. Sizes vary slightly--be sure to measure your base carefully before building the cover. Additional sizes and shapes are also available--please call for details.

Round (1”-thick material) Square / RECTANGLE Product No. W x D $ Each Product No. W x D $ Each 1107099 4” x 4” 6.13 1107108 3” 5.43 1107100 6” x 6” 11.65 1107109 4” 6.64 1107101 8” x 8” 17.58 1107111 8” 18.24 1107102 10” x 10” 25.68 1107105 12” x 8” 24.61

® 42 Order Online - www.craftics.com PRODUCT INDEX

index

Acrylic Bases...... 42 Extrusions...... 37-40 Posts & Screws...... 29 Adhesives...... 10-11 Eyewear Accessories...... 36 Restoration Kits...... 16 Applicators...... 12 Felt ...... 27 Rods & Tubes...... 37-39 Balls & Half Balls...... 26 Flame Polishing Torch...... 14 Router Bits...... 22-25 Blocks...... 26 Funnel...... 13 Saw Blades...... 8-9 Braces...... 28 Glue-On Pockets...... 34 Scraper...... 9 Brochure Holders...... 33 Glue Tips...... 11 Shoe Shelf...... 33 Buffing...... 14-15 Hangers...... 28 Slatwall Shelf...... 33 Bumpers...... 27 Hasps...... 32 Specialty Extrusions...... 37-40 Business Card Holders.... 33 & 34 Heaters...... 8 Standoffs...... 41 Cement...... 10 & 11 Hinges...... 3-7 Step Drills...... 21 Cleaners...... 15-17 Hole Saw...... 21 Suction Cups...... 34 Cleaning Cloths...... 16 Hooks & Holders...... 34-35 Syringes...... 13 Components...... 28 & 29 Knobs & Pulls...... 29 T-Slot Router Bit...... 24 Connectors...... 27 Locks...... 32 Tapes...... 12 Countersinks...... 21 Manual...... 3 Tapped Rods...... 39 Cubes...... 26 Mask-Off...... 17 Towels...... 16 Cutters...... 9 Needles...... 13 Tubes...... 38-39 Discs...... 26 Pegboard Accessories...... 34 Turntables...... 30-31 Door Catch...... 28 Picture Frame Hanging System. ...41 Wheels...... 14-15 Drill Bits...... 18-20 Polish & Scratch Kit...... 15 Wipes...... 16 Easel Backs...... 32 Polishes...... 17 Wood Bases...... 42

TER MS And CONDITIONS CRAFTICS, INC. • All products are shipped FOB Albuquerque, NM, USA. 3615 High St. NE • Visa, Mastercard, American Express and Discover cards accepted. Albuquerque, NM 87107 USA • Adhesives shipped by ground freight only. • Prices subject to change without notice. ONLINE: www.Craftics.com • Returns must be within 30 days; call for a return authorization EMAIL: [email protected] number before returning merchandise. TOLL FREE TEL: 866-296-2130 • All pricing in this catalog is retail. Distributors, wholesalers and TOLL FREE FAX: 800-289-2020 professional fabricators, please inquire about bulk pricing and TEL: 505-338-0005 volume discounts. FAX: 505-338-0008 • Limited warranty parts to be free of defects. • Liability limited to replacement of parts only. © 2016 - Craftics, Inc. All Rights Reserved Worldwide ® Phone 866.296.2130 • Fax 1.800.289.2020 43 astics ishing pl Retail Tool Cutting & fin Display Board

Create a great profit center in only · 32” of your showroom area with our tool display board. Offer a variety of tools and accessories and increase your sales of plastics by making the process of working with plastics easier for your customers.

Attractive, eye–catching design with · a variety of products to choose from.

Pictorial header sign shows many · of the products in use—and that serves to immediately communicate their purpose to your customers.

Quick set up using either the · included easel or by wall mounting. Easel stand, display board, header sign, hooks and inventory are all included.

Product usage information on blister · cards educates your customers in working with plastics.

Easy–to–use products will improve · sales of your line of plastics and related materials to the do–it–yourself public.

These displays are used by plastics · distributors, plastics fabricators, hobby shops, home improvement centers, glass retailers and other similar businesses.

E-mail or fax us for complete · information about our Master Distributor Display program.

Toll Free Phone 866.296.2130 • Toll Free Fax 1.800.289.2020 Order Online - www.craftics.com