ROBERT A. URRUTIA 1745 HARLEN ST LAKEWOOD, CO. 80214 (303) 345-1161 cell [email protected] EDUCATION EL PASO COMMUNITY COLLEGE VALLE VERDE CAMPUS 919 HUNTER DR. EL PASO, TX. CONTINUING EDUCATION CLASSES CERTIFICATE OF COMPLETION 1989 AUTOCAD COURSES

DURHAM COLLEGE 5600 WYOMING ST. EL PASO, TX. CERTIFICATE OF COMPLETION 1985 DRAFTING COURSES

BURGES HIGH SCHOOL 7800 EDGEMERE BLVD. EL PASO, TX. GRADUATED 1973 GENERAL HIGH SCHOOL STUDIES

WORK EXPERIENCE

RIO GRANDE CO. 201 SANTA FE DRIVE. DENVER. CO 303-825-2211 EMPLOYED AUGUST 2006- DECEMBER 2009 Layoff Work with Rio Grande involves drafting (Rebar Detailer) plan views, elevations and details for steel reinforcement and various projects around Denver Colorado and near by cities and towns. Accountability and coordination of steel reinforcement deliveries are part of this job. Drafting is done using micro station v8 Along with “ASA” rebar detailing software system and windows excel spreadsheets.

ROCKY MOUNTAIN PRESTRESS INC. 5801 N. PECOS ST. DENVER. CO 303-480-1111 EMPLOYED DECEMBER 2003- AUGUST 2006 Drafting for assembly and production of precast/prestress products was my work at RMP. All drawings show reinforcement, embedded steel as well as lifting inserts for stripping and field placement (erection). We utilize AutoCAD 2006 and a special in house bill of materials program, which are sent electronically to our coordinating staff.

PARSONS TRANSPORTATION GROUP 7200 S. ALTON WAY (TREX OFFICE) DENVER, CO. 303-357-8475 EMPLOYED OCTOBER 2002- JUNE 2003 PTG is a large engineering consulting firm. My work involved (Structural Draftsman) drafting structural , and roadway designs. At PTG we utilized micro station/j and project wise drawing management supplemental software. My primary job role was to assist our structural bridge engineers on a project in Denver Colorado named Trex. TURNER COLLIE AND BRADEN 999 18TH DENVER, CO. 303-298-7117 EMPLOYED JULY 2001- OCTOBER 2002 COLLIE TURNER and BRADEN. TCB is a civil and consulting firm. My work involved (Structural Draftsman) drafting structural bridge designs and roadway placement. I had been assigned to coordinate and draft primarily for the TREX project. At tcb we utilized primarily micro station/j and /or AutoCAD 2000 depending on customer requirements. My primary job role had been to assist our structural and civil engineers. After we completed our assignments with the trex project, I was asked if I would like to continue with the project in another engineering group. I accepted.

GEA INTEGRATED COOLING TECHNOLOGIES INC. 143 UNION LAKEWOOD, CO. 303-987-0123 EMPLOYED MAY 2000- JULY 2001 G.E.A COOLING TOWER TECHNOLOGIES. G.E.A. designs cooling towers for the power and refinery industry. My work consisted of drafting the towers, which include framing, (wood and fiberglass) distribution (internal piping) mechanical (motor layout and installation) drawing packages for assembly and placement along with a bill of materials and total weight of product manufactured. We used AutoCAD 2000 and windows excel extensively at gea.

ROCKY MOUNTAIN PRESTRESS INC. 5801 N. PECOS ST. DENVER. CO 303-480-1111 EMPLOYED OCT. 1998-MAY 2000 RMP provides architectural and structural concrete products. AutoCAD 14/2000 and custom software is used to create drawings at RMP. I was employed as a /detailer. Along with the /engineer drawings, we drafted shop drawings (plan views, details and elevations) for production and placement of Manufactured products such as structural/architectural columns, beams, tees and walls. I detailed these products showing the reinforcement and embedded steel for plant production. Also accompanying the drawings were a bill of materials and total weight of the product manufactured. All drawings then followed a checking and approval regiment.

BATH ENGINEERING GROUP 4110 RIO BRAVO ST. SUITE 102 EL PASO, TX. 915-534-9110 EMPLOYED DEC. 1989- AUG.1998 BATH is a mechanical, electrical engineering firm. My work consisted of drafting (Mechanical & Structural Draftsman) and implementing cad standards for our various projects. These standards were then followed by bath engineering and drafting personnel. At BATH we utilized AutoCAD 12, 13 & 14. I participated on projects for the El Paso water utilities Paso and Ysleta school districts. We coordinated with the engineers and designers To develop plumbing, HVAC and electrical design drawings and specifications. I also assisted on special assignments (contracts) with El Paso Chevron Refinery engineers and draftsman. Chevron work consisted mainly of developing industrial piping, isometric construction drawings and process and instrumentation diagram drawings. AutoCAD 14 and proiso cad software were utilized. Special assignments also consisted of working with Chevron’s inspection department. I provided cad drawings documenting existing pipe lines, vessels, exchangers, pumps, and similar equipment of each unit in both the south and north sides of the plant. Also accompanying the drawing package of each unit was a process and control diagram that I developed and was reviewed by the plant engineer. These drawings and gathered information were implemented into a database using a software “aperture” (Macintosh) to monitor corrosion and provide a routine scheduled maintenance as required by OSHA. EL PASO MACHINE AND STEEL WORKS INC. 1600 E. FOURTH AVE. EL PASO, TX. 915-533-7483 EMPLOYED 1986- DEC.1989 I was employed as a drafter/detailer (Steel Detailer) at EPMS. Work consisted of structural steel detailing (beams, columns, ladders, handrails and reinforcement rebar) for fabrication and assembly. Anchor bolt layout drawings and steel placement drawings were also drawn and coordinated with the , engineers and field superintendent. Also accompanying the drawings were a bill of materials and total weight of the product manufactured. Manual drafting was utilized at EPMS.

PERSONAL REFERENCES PROVIDED UPON REQUEST.

SALARY NEGOTIABLE