Shell Advance 4T AX2 4 Stroke engine oil

Advance 4T AX2 is a multi-grade lubricant for , mopeds and small engine motorbikes with small, hot running, hard working engines that require a reliable oil for continuous protection. Shell Advance 4T AX2 offers high oil performance and reliability to help protect and clean your engine between oil changes.

Applications Specification and Approvals • Underbones, mopeds and small engine The product is available in two different viscosity motorbikes with air-cooled four stroke grades: motorcycle engines, including those with SAE J 300 15W-40. integral gearboxes and wet . All the formulations exceed the following • Motorcycle gearboxes that must be lubricated international specification: by engine oils, including some gearboxes API SF, present in two stroke bikes and scooters.

Advance 4T AX2 exceeds the requirements of all Performance Features and Benefits. Japanese, European, Indian and Chinese , moped and small engine motorbike . Oil performance Reliability manufacturers requiring API SF performance oil. • Conventonal Technology lubricant Special oil formulation to keep oil viscosity in- Health and Safety grade. Guidance on Health and Safety are available on • the appropriate Material Safety Data Sheet that Enhanced wear protection. can be obtained from your Shell representative. Enhanced protection actions valve train wear. Protect the environment • Enhanced cleanliness. Take used oil to an authorised collection point. Prevent sludge and engine deposit formation . Do not discharge into drains, soil or water.

Advanced Control • Smooth and gearbox operation. Optimised viscometrics for smoother clutch engagement and gear changes.

• Latest ant-wear protect. Optimised wear protect to protect your hard wearing engine.

Enjoyable Ride . • Reduced vibration and engine noise. Selected viscometrics to dampen vibration and reduce noise.

July 2010 Advance 4T AX2 - page 1:1

Typical Physical Characteristics Advance 4T AX2 15W-40 SAE Viscosity grade 15W-40 Kinematic Viscosity ASTM D 445 at 40°C mm 2/s 106.2 at 100°C mm 2/s 14.3 Viscosity Index ISO 2909 150 Density at 15°C kg/m 3 ASTM D 4052 870 Flash Point COC °C ISO 2592 235 Pour Point °C ISO 3016 -30 These characteristics are typical of current production. Whilst future production will conform to Shell's specification, variations in these characteristics may occur.

July 2010 Advance 4T AX2 - page 2:1