/CodaOctopus® Construction Monitoring Solution (CMS)

Benefits

Tracking and recording of block position and orientation during placement and post lay with no additional sensors

Real-Time 3D underwater scene awareness for crane operator

24 x 7 operations irrespective of water visibility

Increased rate of productivity

Increased accuracy and confidence of block final resting position

Increased diver safety and reduced reliance on divers for placement

Real-time survey grade inspection of slope prior to and during placement

Complete construction management system to see, track, place, record and document blocks placement.

The CodaOctopus® Construction Monitoring Solution (CMS) which works in Features conjunction with our Echoscope® sonars and our Echoscope® Air is a comprehensive software tool that increases productivity and safety of breakwater construction projects by enhancing the usual Echoscope’s proficiency to visualize blocks in all See, track, place, record and document blocks as laid water conditions including zero visibility conditions. The addition of the Echoscope® The acoustic point cloud data of each block is recognized by the software, a Air allows 3D Visualization and placement of the above the water blocks. 3D model of the block selected by the operator and the solution automatically locks the model onto the point cloud data. The operator has a clear 3D model This solution includes the ability to simplify block position placement, automatically of the block to work from, enabling increased accuracy of block lay, as the tracks block position/orientation, and record position/orientation for easy project operator can ‘see’ all sides of the block. management. Combining this with the Echoscope’s capability to perform detailed pre- and post-lay surveys results in the Echoscope and CMS combination providing Real-Time Visualization a complete end to end solution for construction, repair and maintenance of Real-time 3D visualization of blocks and slope irrespective of water conditions breakwaters. for increased productivity, diver-less placement and pre/post-lay survey.

This solution includes advanced features which enable different types and sizes of 3D Automatic Tracking blocks to be automatically tracked from the real-time 3D Echoscope data. A 3D model The unique model tracking technology means the final position and attitude of the berm design can be imported into the software for increased accuracy of can be recorded in the global CMS database. The tracking can be further placement and ease and speed of operation. The advanced features extend across activated on subsequent survey data allowing the master asset database to the project enabling pre-lay survey of the berm and as-laid blocks, assisting real be quickly updated with any block-placement movement. time block placement and recording as laid position of each block for end-to-end management of the project. Construction Workflow Management CMS provides the capability to manage, monitor and document the The pre-lay target position can be imported into CMS and a target bullseye for each entire construction phase of asset placement projects. Site design, pre- planned block position created, giving the operator a clear easy to use guide to lay information, and data can be loaded into CMS (full X,Y,Z positions and accurate planned, block position in XY and Z space. rotations) for control, progress reporting and full-time visualization of placed assets, including those being actively placed. The system is fully extensible and is currently certified for a number of different block types including ™, ACCROPODE™ II, and XBloc® construction blocks and variants of the system have been used on a large number of breakwater projects around the world. If required, we can support different type of block selections. /CodaOctopus® Construction Monitoring Solution (CMS)

Past Projects and References

ACCROPODE™ and ACCROPODE™ II Projects CORE-LOC™ Projects Satah al-Razboot (UAE) Al-Zour (Kuwait) Upper Zakum Field (UAE) Constanta Ras (Romania) Projects Ras Laffan (Qatar) Tokushima (Japan) Moin (Costa Rica) Chhara (India) Antifer Projects Tema (Ghana) Hamifratz Port (Israel) Colombo (Sri Lanka) XBloc® Projects Sumburgh (Scotland) Bloque Cubic Rainure (BCR) Projects Swinoujscle (Poland) Port of Safi (Morocco) Offshore Islands (Abu Dhabi) Dunkerque (France) Eric Peeters of Van Oord says: Das Islands (Abu Dhabi) Istanbul (Turkey) “Van Oord has been using the Echoscope real-time 3D imaging sonar on various projects from 2008 onwards where single-layer artificial Productivity Gains armour units (ACCROPODE™ & ACCROPODE™ II) need to be placed. Satah al-Razboot, UAE - 8-9 blocks/hour (CLI Data) During placement, the Echoscope 3D imaging sonar provides real-time Zadco Upper Zakum Field, UAE - 8-9 blocks/hour (CLI Data) guidance to the crane operator. The Echoscope has contributed to an LNG Port Expansion - 10 blocks/hour (Van Oord/Boskalis Data) increased productivity whilst improving safety.

Over the last year, Van Oord has taken part in the development of Supported Block Types the CMS 2.0 solution which provides, amongst other new features, CMS supports a number of different block types which are listed below.If your Block Type enhanced ACCROPODE™ tracking functionality which makes it another is not currently listed, please contact us and we can extend our support for your Project leap forward to diver-less placement. By providing a test location in Block Type. Constanta, Romania, it was possible to feed the software developers instantly with new information. ACCROPODE™ I ACCROPODE™ II Van Oord operates around the world as a leading contractor for dredging, marine engineering, and offshore energy projects (oil & gas and offshore ACCROBERM™ I ACCROBERM™ II wind).

Blair Cunningham, Coda Octopus President of Technology, says “in CORE-LOC™ developing our CMS solution, we worked closely with Van Oord who own multiple Echoscope systems. This has given us real world feedback to enhance the capabilities of the package and, more importantly to ECOPEDE™ Tetrapods address challenges that our customers face in these types of operations.” XBloc® XBloc® Plus

CMS Solution Workflow

Pre-Survey Placement Monitoring Recovery Survey Reporting

Underwater Survey Construction Monitoring Solution (CMS) Underwater Survey Construction Monitoring Explorer (USE) Explorer (USE) Solution (CMS)

How to Access CMS Software

Our CMS software is available to license for fixed periods of 6, 12, 24, or 36 months. Each CMS license is linked to a specific Echoscope® sonar and can only be used with this system. Please contact [email protected] for more information on how to obtain a CMS license.

Copyright© 2020 Coda Octopus CodaOctopus®, Echoscope®, Echoscope4G®, Echoscope® PIPE, Echoscope4G® PIPE, Echoscope® 6D, Echoscope® 5D, 5D Echoscope® 4G USE® Ping-Pong Echoscope® Sonar, Ping-Pong® Sonar, Ping-Pong Echoscope® are trademarks of Coda Octopus. This list is not exhaustive of all our trademarks used with our products and/or services. A Special thanks to Concrete Layer Innovations and Delta Marine Consultants for providing the 3D models of the breakwater block types pictured in this document. ACCROPODE™, ACCROPODE™ II, ECOPODE™, ACCROBERM™ I, and ACCROBERM™ II are trademarks of d’Artelia. CORE-LOC™ is a trademark of the United States Army Corps of Engineers. Xbloc® is a registered trademark of Delta Marine Consultants.

The information in this publication was correct when it was published but specifications may change without notice. Photos are included for illustrative purposes only and actual items may differ in appearance. Coda Octopus does not assume responsibility for typographical or photographical errors. Issue 1.5 (9.20) Sales Worldwide: +44 131 553 1380 Sales Americas: +1 407 735 2400 More Information: [email protected] [email protected] www.codaoctopus.com Technical Support Worldwide: +44 131 553 7003 Technical Support Americas: +1 888 340 2632