DOCSLIB.ORG

GD-W213L Monitor

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
GD-W213L Monitor JVCKENWOOD Sales Information KEY FEATURES KY-PZ100 GD-W213LDT-V17G25/DT-V24G2/DT-V17G2 monitor und DT-V21G2 • 1 / 2.8-inch CMOS sensor (2.2 million pixels) • Optical zoom lens with 30x zoom ratio (4,3-129mm, f / 1.6 ~ 4.7) Powerful f / 1.6 to 4.7 • OctoberLoLuxGeneralle Monitorenmode 2015 Spezifikationen(up to 0.01 lux) DT-V17G2 DT-V17G25 DT-V21G2 DT-V24G2 Screen Size 17 (16,5" effective) 17 (16,5" effective) 21 (21,5" effective) 24 • DirectNumber of drivepixels displayed motor for pan, tilt and zoom1920 x 1080 1920 x 1080 1920 x 1080 1920 x 1200 Panel Type IPS IPS IPS IPS • FullNumber HD of colours 1080p, displayed 1080i, 720p video 16.7M 107.3B 16.7M 107.3B • 3GBrightness SDI and HDMI digital output 300cd/m2 450cd/m2 300cd/m2 400cd/m2 Contrast 1500:1 1500:1 1500:1 1500:1 • 2Reaction channel Time audio (or 1-channel balanced8ms audiotyp with Phantom8ms typ power) 8ms typ 8ms typ • USBViewing Anglehost (Typ.) port for WiFi or 4G LTE adapter178 x 178 178 x 178 178 x 178 178 x 178 Audio Output 1+1W 1+1W 1+1W 1+1W • LANWave Form port supports Power over EthernetYes (PoE) Yes Yes Yes • AdvancedWave Form Size (small/big) IP communication capability:Yes Yes Yes Yes Vectorscope Yes Yes Yes Yes • StreamingVectorscope Size (small/big) with SMPTE 2022 forward errorYes correction Yes Yes Yes R/G/B/Y Histogram Yes Yes Yes Yes • Extended16-Channel Audio Zixi reliable communication with16ch ARQ, FEC and 16chadaptive bit rate control16ch 16ch • LowZebra stripes latency streaming Yes Yes Yes Yes R/G/B/Mono Yes Yes Yes Yes • RTMPTimecode streaming directly to Content DeliveryYes Network (JVC VIDEOYes CLOUD, YouTube,Yes Ustream, Facebook,Yes etc.) • MicroAFD info SDHC / SDXC memory cards Yes Yes Yes Yes Progressive/Field and Cinema 3:2 pull down) Converter Yes Yes Yes Yes • RemoteSafety marker control via the RS-232C / RS-42280%-100% or IP 80%-100% 80%-100% 80%-100% "4:3, 16:9, 14:9, 13:9, 2.35:1, "4:3, 16:9, 14:9, 13:9, 2.35:1, "4:3, 16:9, 14:9, 13:9, 2.35:1, "4:3, 16:9, 14:9, 13:9, 2.35:1, Bild Marker 1.85:1, 1.75:1, 1.66:1" 1.85:1, 1.75:1, 1.66:1" 1.85:1, 1.75:1, 1.66:1" 1.85:1, 1.75:1, 1.66:1" GPI Yes Yes Yes Yes "Analog: Yes "Analog: Yes "Analog: Yes "Analog: Yes Auto Aspect KEY FEATURES RM-LP100 Digital: Yes" Digital: Yes" Digital: Yes" Digital: Yes" User Buttons Yes (2 function key) Yes (3 function key) Yes (4 function key) Yes (5 function key) Key Lock Yes Yes Yes Yes • TouchGleichspannungsbetrieb panel operation control Yes No Yes No Integrated power supply Yes Yes Yes Yes • RobustExternal power mechanical supply joystick Yes Yes Yes Yes • togglePucture signaal for processing zoom control 8 10 8 10 1:1 Pixel scan Yes Yes Yes Yes • knobMonochrome for / Colouroperations and / or BlueCheck and Focus Push Yes Yes Yes Yes • RuggedOver-, under- and metal neutral scanchassis controller IP Yes Yes Yes Yes Eingangs-Direkt Auswahl ??????????? Yes Yes Yes Yes • DCColour power temperature supply (AC / DC adapter 6500/9305/Userincluded) 6500/9306/User 6500/9307/User 6500/9308/User Gamma Yes (2.2, 2.35, 2.45, 2.6) Yes (2.2, 2.35, 2.45, 2.6) Yes (2.2, 2.35, 2.45, 2.6) JA (2.2, 2.35, 2.45, 2.6) • IPPreset Ethernet control port Yes (OFF/Mode1/Mode2/Mode3) Yes (OFF/Mode1/Mode2/Mode3) Yes (OFF/Mode1/Mode2/Mode3) Yes (OFF/Mode1/Mode2/Mode3) • SuitablePreset with default for user JVC adjustments IP-based camcordersYes and No Yes and No Yes and No Yes and No Automatic Calibration Procedure Option Option Option Option • Colour:In- Monitor Display, Black UMD & on-air display Tally red Yes Yes Yes Yes Tally green Yes Yes Yes Yes UMD Yes JA Yes Yes TSL-5.0 Ethernet Yes (Serial) Yes (Serial) Yes (Serial) Yes (Serial) RS232 Yes Yes Yes Yes 576i/25 (ITU-R Rec. BT.601-7) Yes Yes Yes Yes 720p/50 (SMPTE ST 296:2012) Yes Yes Yes Yes 1080i/25 (SMPTE ST 274:2008/ITU-R Rec. BT.709-5) Yes Yes Yes Yes 1080p/25 (SMPTE ST 274:2008/ITU-R Rec. BT.709-5) Yes Yes Yes Yes 1080PsF/25 (SMPTE ST 274:2008/ITU-R Rec. BT.709-5) Yes Yes Yes Yes SD-SDI/HD-SDI (SMPTE 259M-C/ITU-R BT.601-5/SMPTE Yes Yes Yes Yes 292M-1998) Dual Link HD-SDI or 3 Gb/s (SMPTE 372M-2002 Dual Link) Yes Yes Yes Yes HD-SDI 3 Gb/s (SMPTE 425M-2006 Single Link) Yes Yes Yes Yes HDMI V1.4 Yes Yes Yes Yes HDCP Compliant Yes Yes Yes Yes DVI 1.0 No No No No Component Yes Yes Yes Yes CVBS PAL Yes Yes Yes Yes ProductMarkers for Titel and Safty Zone Description Yes AvailabilityYes Yes Yes GPI Yes Yes Yes Yes KY-PZ100BERS232 (black) PTZ camera Yes OctoberYes 2016 Yes Yes KY-PZ100WE (white) PTZ camera October 2016 Register for free and test the new JVC streaming platform at www.jvcvideocloud.com RM-LP100Availability IP controller October 2016 Register for free and test the new JVC DT-V17G25 DT-V24G2 DT-V17G2 DT-V21G2 streaming platform at www.jvcvideocloud.com Oct 2016 Sep 2016 Nov 2016 Dec 2016 www.jvcpro.eu © JVCKENWOOD. Details subject to change without notice. All features, pictures and recording formats arewww.jvcpro.eu tentative. Further details about the specifications can’t be given currently, due to ongoing development. © JVCKENWOOD. Details subject to change without notice. All features, pictures and recording formats are tentative. Further details about the specifications can’t be given currently, due to ongoing development..
Load more

Recommended publications
  • Naba Dpp Hd (Mpeg-2)
    TECHNICAL SPECIFICATIONS FOR DELIVERY OF “MPEG-2 Air Ready” TELEVISION PROGRAMS TO Insert Broadcaster Name and Logo This document is a guide to the technical standards for delivery of MPEG-2 based Air Ready Masters as agreed by the North American Broadcasters Association and the Digital Production Partnership for use in Canada and the United States. The document includes: NABA-DPP Common Technical Specifications: • Technical parameters which must be used and that all material must meet to be acceptable by the NABA broadcasters. • Metadata Specifications. Broadcaster Specific Instructions and Requirements: • Mandatory broadcaster Delivery Requirements, which details the broadcaster Specific instructions for the de livery of program material. • Broadcaster Production and Post Production requirements, which form part of the binding contract for the delivery of program material. This section includes individual broadcaster requirements for Program Production and Post Production and guidance on the expected perceptual picture and sound quality. Picture and Sound quality assessment is subjective and therefore highly dependent on the nature of the program. Some quality requirements may be expressed in relative terms (“reasonable”, “not excessive” etc.), and it will be necessary to make a judgment as to whether the quality expectations of the program’s intended audience will be fulfilled and whether the broadcaster will feel that value for money has been achieved. Every program submitted for transmission must satisfy both an Objective Technical Quality Control process and a Subjective Picture and Sound Quality Assessment as specified by [BROADCASTER’S NAME]. Any program failing to meet these requirements may be rejected. Note: Unless specifically stated, quoted standards documents shall refer to the published version in force at the time of reading (e.g.
    [Show full text]
  • User Requirements for Video Monitors in Television Production
    TECH 3320 USER REQUIREMENTS FOR VIDEO MONITORS IN TELEVISION PRODUCTION VERSION 4.1 Geneva September 2019 This page and several other pages in the document are intentionally left blank. This document is paginated for two sided printing Tech 3320 v4.1 User requirements for Video Monitors in Television Production Conformance Notation This document contains both normative text and informative text. All text is normative except for that in the Introduction, any § explicitly labeled as ‘Informative’ or individual paragraphs which start with ‘Note:’. Normative text describes indispensable or mandatory elements. It contains the conformance keywords ‘shall’, ‘should’ or ‘may’, defined as follows: ‘Shall’ and ‘shall not’: Indicate requirements to be followed strictly and from which no deviation is permitted in order to conform to the document. ‘Should’ and ‘should not’: Indicate that, among several possibilities, one is recommended as particularly suitable, without mentioning or excluding others. OR indicate that a certain course of action is preferred but not necessarily required. OR indicate that (in the negative form) a certain possibility or course of action is deprecated but not prohibited. ‘May’ and ‘need not’: Indicate a course of action permissible within the limits of the document. Informative text is potentially helpful to the user, but it is not indispensable, and it does not affect the normative text. Informative text does not contain any conformance keywords. Unless otherwise stated, a conformant implementation is one which includes all mandatory provisions (‘shall’) and, if implemented, all recommended provisions (‘should’) as described. A conformant implementation need not implement optional provisions (‘may’) and need not implement them as described.
    [Show full text]
  • ATSC Candidate Standard: Video – HEVC (A/341)
    ATSC S34-168r7 Video – HEVC 03 January 2017 ATSC Candidate Standard: Video – HEVC (A/341) Doc. S34-168r7 03 January 2017 Advanced Television Systems Committee 1776 K Street, N.W. Washington, D.C. 20006 202-872-9160 i ATSC S34-168r7 Video – HEVC 03 January 2017 The Advanced Television Systems Committee, Inc., is an international, non-profit organization developing voluntary standards for digital television. The ATSC member organizations represent the broadcast, broadcast equipment, motion picture, consumer electronics, computer, cable, satellite, and semiconductor industries. Specifically, ATSC is working to coordinate television standards among different communications media focusing on digital television, interactive systems, and broadband multimedia communications. ATSC is also developing digital television implementation strategies and presenting educational seminars on the ATSC standards. ATSC was formed in 1982 by the member organizations of the Joint Committee on InterSociety Coordination (JCIC): the Electronic Industries Association (EIA), the Institute of Electrical and Electronic Engineers (IEEE), the National Association of Broadcasters (NAB), the National Cable Telecommunications Association (NCTA), and the Society of Motion Picture and Television Engineers (SMPTE). Currently, there are approximately 120 members representing the broadcast, broadcast equipment, motion picture, consumer electronics, computer, cable, satellite, and semiconductor industries. ATSC Digital TV Standards include digital high definition television (HDTV), standard definition television (SDTV), data broadcasting, multichannel surround-sound audio, and satellite direct-to-home broadcasting. Note: The user's attention is called to the possibility that compliance with this standard may require use of an invention covered by patent rights. By publication of this standard, no position is taken with respect to the validity of this claim or of any patent rights in connection therewith.
    [Show full text]
  • XAPP592 (V2.0) July 14, 2014
    Application Note: Kintex-7 Family Implementing SMPTE SDI Interfaces with Kintex-7 GTX Transceivers Author: John Snow XAPP592 (v2.0) July 14, 2014 Summary The Society of Motion Picture and Television Engineers (SMPTE) serial digital interface (SDI) family of standards is widely used in professional broadcast video equipment. These interfaces are used in broadcast studios and video production centers to carry uncompressed digital video, along with embedded ancillary data such as multiple audio channels. The Xilinx® SMPTE SD/HD/3G-SDI LogiCORE™ IP is a generic SDI receive/transmit datapath that does not have any device-specific control functions. This application note provides a module containing control logic to couple the SMPTE SD/HD/3G-SDI LogiCORE IP with the Kintex®-7 FPGA GTX transceivers to form a complete SDI interface. This application note also provides several example SDI designs that run on the Xilinx Kintex-7 FPGA KC705 evaluation board. Terms used in this document are explained in the Glossary, page 63. Titles of SMPTE reports and standards are listed in References, page 66, and referred to by SMPTE document number in text. Introduction The Xilinx SMPTE SD/HD/3G-SDI LogiCORE IP (called the SDI core in the rest of this document) can be connected to a Kintex-7 GTX transceiver to implement an SDI interface capable of supporting the SMPTE SD-SDI, HD-SDI, and 3G-SDI standards. The SDI core and GTX transceiver must be supplemented with some additional logic to connect them together to implement a fully functional SDI interface. This application note describes this additional control and interface logic and provides the necessary control and interface modules in both Verilog and VHDL source code.
    [Show full text]
  • Etsi Ts 101 154 V2.4.1 (2018-02)
    ETSI TS 101 154 V2.4.1 (2018-02) TECHNICAL SPECIFICATION Digital Video Broadcasting (DVB); Specification for the use of Video and Audio Coding in Broadcast and Broadband Applications 2 ETSI TS 101 154 V2.4.1 (2018-02) Reference RTS/JTC-DVB-377 Keywords broadcasting, digital, DVB, MPEG, TV, UHDTV, video ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88 Important notice The present document can be downloaded from: http://www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https://portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI.
    [Show full text]
  • Source Image Format and Ancillary Data Mapping for the 3 Gb/S Serial
    SMPTE ST 425-1:2017 Revision of SMPTE ST 425-1:2014 SMPTE STANDARD Source Image Format and Ancillary Data Mapping for the 3 Gb/s Serial Interface Page 1 of 32 pages Table of Contents Page 1 Scope ................................................................................................................................................... 3 2 Conformance Notation ....................................................................................................................... 3 3 Normative References ................................ ................................ ................................ ........................ 4 4 Level A — Direct Mapping of Source Image Formats ..................................................................... 5 4.1 20-Bit Virtual Interface ................................ ................................ ....................................................... 6 4.2 Virtual Interface — Data Stream Mappings .................................................................................... 13 5 Level B ― Mapping of SMPTE ST 372 Dual-Link .......................................................................... 23 5.1 SMPTE ST 372 Dual Link Mapping ................................ ................................ .................................. 24 6 Level B ― 2 x SMPTE ST 292-1 (HD-SDI) Dual-Stream Mapping ................................................. 26 6.1 2 x SMPTE ST 292 -1 (HD-SDI) Dual Stream Mapping ................................ .................................... 26 7 Levels
    [Show full text]
  • Availability DT-V17G25 Oct 2016 DT-V24G2 Sep 2016 DT-V17G2
    O Specifications DT -V17G2 DT -V17G25 DT -V21G2 DT -V24G2 Screen Size 17 (16,5" effective) 17 (16,5" effective) 21 (21,5" effective) 24 Number of pixels displayed 1920 x 1080 1920 x 1080 1920 x 1080 1920 x 1200 Panel Type IPS IPS IPS IPS Number of colours displayed 16.7M 107.3B 16.7M 107.3B Brightness 300cd/m 2 450cd/m 2 300cd/m 2 400cd/m 2 Contrast 1500:1 1500:1 1500:1 1500:1 Reaction Time 8ms typ 8ms typ 8ms typ 8ms typ Viewing Angle (Typ.) 178 x 178 178 x 178 178 x 178 178 x 178 Audio Output 1+1W 1+1W 1+1W 1+1W Wave Form Yes Yes Yes Yes Wave Form Size (small/big) Yes Yes Yes Yes Vectorscope Yes Yes Yes Yes Vectorscope Size (small/big) Yes Yes Yes Yes R/G/B/Y Histogram Yes Yes Yes Yes 16-Channel Audio 16ch 16ch 16ch 16ch Zebra stripes Yes Yes Yes Yes R/G/B/Mono Yes Yes Yes Yes Timecode Yes Yes Yes Yes AFD info Yes Yes Yes Yes Progressive/Field and Cinema 3:2 pull down Yes Yes Yes Yes Converter Safety marker 80%-100% 80%-100% 80%-100% 80%-100% Aspect ratio marker 4:3, 16:9, 14:9, 13:9, 2.35:1, 4:3, 16:9, 14:9, 13:9, 2.35:1, 4:3, 16:9, 14:9, 13:9, 2.35:1, 4:3, 16:9, 14:9, 13:9, 2.35:1, GPI Yes Yes Yes Yes Auto Aspect Analog: Yes Analog: Yes Analog: Yes Analog: Yes Digital: Yes Digital: Yes Digital: Yes Digital: Yes User Buttons Yes (2 function key) Yes (3 function key) Yes (4 function key) Yes (5 function key) Key Lock Yes Yes Yes Yes Integrated power supply Yes Yes Yes Yes External power supply Yes Yes Yes Yes Signal processing (display panel) 8 bit 10 bit 8 bit 10 bit Monochrome / Colour and / or BlueCheck Yes Yes Yes Yes Over, under
    [Show full text]
  • Advice on the Use of 3 Gbit/S HD-SDI Interfaces
    Technical Report 002 Advice on the use of 3 Gbit/s HD-SDI interfaces Level A Level B-DL (Dual Link) Level B-DS (Dual Stream) Geneva July 2011 2 EBU Technical Report 002 – V1.0 Advice on 3G-SDI interfaces for 1080p HDTV & 3DTV Contents 1. Scope .............................................................................................. 5 2. Document objectives .......................................................................... 5 3. Relevant Standards ............................................................................. 6 4. Background....................................................................................... 6 4.1 Analogue to digital transition............................................................................6 4.2 Overview ....................................................................................................7 4.3 General Issues ..............................................................................................7 4.3.1 Conversion ........................................................................................................ 8 4.3.2 Pathological Test Patterns ..................................................................................... 8 4.3.3 Switch Regions ................................................................................................... 8 4.3.4 Payload Mapping ................................................................................................. 8 4.3.5 Embedded Audio ................................................................................................
    [Show full text]
  • Tvpc Pliegos Técnicos Versión Final Revisada Por Daida
    04/17 TVPC PLIEGO DE PRECRIPCIONES TÉCNICAS QUE RIGEN LA LICITACIÓN PARA LA CONTRATACIÓN, POR TELEVISIÓN PÚBLICA DE CANARIAS, S.A. DEL SERVICIO DE PRESTACIONES TÉCNICAS Y MATERIALES PARA LA EJECUCIÓN Y EMISIÓN DE PROGRAMAS INFORMATIVOS DE LA TELEVISIÓN PÚBLICA DE CANARIAS, S.A. Y SERVICIOS COMPLEMENTARIOS Contenido I. ESPECIFICACIONES TÉCNICAS MÍNIMAS DE LAS PRODUCCIONES AUDIOVISUALES ............. 2 II. SERVICIOS COMPLEMENTARIOS A EJECUTAR POR EL ADJUDICATARIO .............................. 4 III. CANALES DE EMISIÓN ..................................................................................................... 8 IV. CONTENIDOS AUDIOVISUALES ........................................................................................ 9 V. DESCRIPCIÓN DE LOS CENTROS DE PRODUCCIÓN (CPP), ESPECIFICACIONES TÉCNICAS DEL EQUIPAMIENTO, SISTEMAS Y APLICACIONES INFORMÁTICAS PARA LA PRESTACIÓN DE LOS DIFERENTES SERVICIOS. ................................................................................................ 12 VI. RELACIÓN DE MEDIOS PERSONALES MÍNIMOS PARA LA PRESTACIÓN DEL SERVICIO DE PRESTACIONES TÉCNICAS Y MATERIALES PARA LA PRODUCCIÓN DE PROGRAMAS INFORMATIVOS. ........................................................................................................... 75 Calle La Marina , 57 Calle Profesor Lozano, 9 2ª Planta Polígono Industrial El Sebadal 1 38001 Santa Cruz de Tenerife 35008 Las Palmas de Gran Canaria Tel. 922 470600 Fax. 922 273 173 Tel. 928 476 700 Fax. 928 47 6714 www.rtvc.es I. ESPECIFICACIONES TÉCNICAS MÍNIMAS
    [Show full text]
  • Ccsds 766.1-B-3
    Recommendation for Space Data System Standards DIGITAL MOTION IMAGERY RECOMMENDED STANDARD CCSDS 766.1-B-3 BLUE BOOK April 2021 Recommendation for Space Data System Standards DIGITAL MOTION IMAGERY RECOMMENDED STANDARD CCSDS 766.1-B-3 BLUE BOOK April 2021 CCSDS RECOMMENDED STANDARD FOR DIGITAL MOTION IMAGERY AUTHORITY Issue: Recommended Standard, Issue 3 Date: April 2021 Location: Washington, DC, USA This document has been approved for publication by the Management Council of the Consultative Committee for Space Data Systems (CCSDS) and represents the consensus technical agreement of the participating CCSDS Member Agencies. The procedure for review and authorization of CCSDS documents is detailed in Organization and Processes for the Consultative Committee for Space Data Systems (CCSDS A02.1-Y-4), and the record of Agency participation in the authorization of this document can be obtained from the CCSDS Secretariat at the email address below. This document is published and maintained by: CCSDS Secretariat National Aeronautics and Space Administration Washington, DC, USA Email: [email protected] CCSDS 766.1-B-3 Page i April 2021 CCSDS RECOMMENDED STANDARD FOR DIGITAL MOTION IMAGERY STATEMENT OF INTENT The Consultative Committee for Space Data Systems (CCSDS) is an organization officially established by the management of its members. The Committee meets periodically to address data systems problems that are common to all participants, and to formulate sound technical solutions to these problems. Inasmuch as participation in the CCSDS is completely voluntary, the results of Committee actions are termed Recommended Standards and are not considered binding on any Agency. This Recommended Standard is issued by, and represents the consensus of, the CCSDS members.
    [Show full text]
  • AW-HE130W/K HD Integrated Camera
    AW-HE130W/K HD Integrated Camera AW-HE130W AW-HE130K For indoor use Production Quality HD Video via 3G-SDI and IP Streaming Full HD Camera with Integrated Pan-Tilt Provides Video Output via 3G-SDI or IP Streaming Transmission for an Expanded Range of Applications Introducing a new PTZ camera capable Production Quality Full HD video output up to 1080/60p via IP transmission, in addition to 3G-SDI and HDMI. Equipped with three newly developed 1/2.86 MOS sensors for high sensitivity, a superior S/N ratio and high resolution. The AW-HE130W/K also supports PoE+*, so the camera only needs one LAN cable for its power supply, control and video output. Presenting the new standard in versatile, high-quality remote production with 3G-SDI, IP-Streaming, and POE+. * Abbreviation of Power over Ethernet Plus. A Single Cable Solution for Remote Video and Audio Capture Full HD video output via IP transmission List of Supported Multi-streaming Outputs H.264 JPEG Settings In addition to 3G-SDI and HDMI output, production quality CH1 CH2 CH3/CH4 CH1/CH2/CH3 full HD video output via IP transmission is supported with the 1920×1080/ 1280×720/ 1920×1080/ AW-HE130W/K. The camera delivers up to four channels of IP 1920×1080/ Resolution 1280×720/640×360/ 640×360/320×180/ 1280×720/640×360/ 1280×720 streaming video (H.264), with a maximum quality level of 320×180/160×90 160×90 320×180/160×90 1 1080/60p at 24 Mbps* . Simultaneous transmission to as 2 Frame 60 Hz 60 fps 5 fps/15 fps/30 fps 5 fps/15 fps/30 fps 5 fps/15 fps/30 fps many as 14 devices is also supported.* Flexible system setup rate 50 Hz 50 fps 5 fps/12.5 fps/25 fps 5 fps/12.5 fps/25 fps 5 fps/12.5 fps/25 fps is possible to meet various application needs.
    [Show full text]
  • WD SMPTE STANDARD Interoperable Master Format
    SMPTE 2067-30-201x WD SMPTE STANDARD Interoperable Master Format – Application #3 Page 1 of 20 pages Version 0.5 (3/6/2012 4:08:00 a3/p3 :: application-3-2012-03-06_R010.doc) Warning This document is not a SMPTE Standard. It is distributed for review and comment. It is subject to change without notice and shall not be referred to as a SMPTE Standard. Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to provide supporting documentation. Distribution does not constitute publication. Table of Contents 1 Introduction 2 2 Scope 2 3 Conformance Notation 2 4 Normative References 3 5 Overall 4 6 Essence 5 7 Track Files 9 8 Composition 17 9 IMF Master Package (IMP) 19 Annex A Sequence Elements 19 Annex B StereoImageTrackFileResourceType 19 Foreword SMPTE (the Society of Motion Picture and Television Engineers) is an internationally-recognized standards developing organization. Headquartered and incorporated in the United States of America, SMPTE has members in over 80 countries on six continents. SMPTE’s Engineering Documents, including Standards, Recommended Practices, and Engineering Guidelines, are prepared by SMPTE’s Technology Committees. Participation in these Committees is open to all with a bona fide interest in their work. SMPTE cooperates closely with other standards-developing organizations, including ISO, IEC and ITU. Copyright © 2007 by THE SOCIETY OF MOTION PICTURE AND TELEVISION ENGINEERS 3 Barker Avenue., White Plains, NY 10601 (914) 761-1100 Approved <TBD> PROPOSED STRAWMAN – NOT A COMMITTEE DRAFT SMPTE yyy-y-201x SMPTE Engineering Documents are drafted in accordance with the rules given in Part XIII of its Administrative Practices.
    [Show full text]