Tractor Implement Specialists

Price List September 2015 Notes 1

Table of Contents Kanga Mini Range Rotary Cutter ...... 2 Kanga Tipping Box Carryall ...... 20 Kanga S Range Rotary Cutter ...... 3 Kanga Hydraulic Transport Box ...... 20 Kanga M Range Rotary Cutter ...... 4 Kanga Wood Floor Carryall ...... 20 Kanga H Range Rotary Cutter ...... 5 Kanga Jib Crane ...... 21 Kanga 3PL Twin Rotor Rotary Cutter – Light Duty ...... 6 Kanga Bale Spike ...... 21 Kanga 3PL Twin Rotor Rotary Cutter – Heavy Duty ..... 7 Kanga Silage Fork ...... 21 Kanga 3PL Pasture Topper ...... 8 Kanga Adjustable Round Bale Feed Out Fork ...... 22 Kanga Trailing Pasture Topper ...... 9 Kanga Disc Harrow...... 22 Kanga 3PL Tri-Rotor Rotary Cutter ...... 10 Kanga Pasture Harrow Rake...... 22 Kanga Mini Range Grader Blade ...... 11 Kanga Combo Harrow ...... 23 Kanga S Range Grader Blade ...... 11 Kanga Chain Link Drag Harrow ...... 23 Kanga M Range Grader Blade ...... 12 Kanga Box Scraper ...... 24 Kanga Multi Clamp Grader Blade ...... 12 Kanga Stick Rake ...... 24 Kanga H Range Grader Blade ...... 13 Sicma TB Series Flail Mower ...... 25 Kanga XH Range Grader Blade ...... 13 Sicma TMX Series Flail Mulcher ...... 26 Kanga Mini Range Post Hole Digger ...... 14 Sicma TR Series Flail Mulcher ...... 27 Kanga M Range Post Hole Digger ...... 14 Sicma TZF Series (Front/Rear) Flail Mulcher ...... 28 Kanga H Range Post Hole Digger ...... 14 Sicma BH Series Rotary Hoe ...... 29 Kanga XH Range Post Hole Digger ...... 15 Sicma CS Series Rotary Hoe ...... 30 Kanga Post Hole Digger Augers ...... 15 Sicma RM Series Rotary Hoe ...... 31 Kanga Mini Range Single Tine Ripper ...... 16 Sicma SPR Series Rotary Hoe ...... 32 Kanga M Range Single Tine Ripper ...... 16 Sicma RG Series Rotary Hoe ...... 33 Kanga H Range Single Tine Ripper ...... 16 Cosmo 3-PL Spinner Spreader ...... 34 Kanga M Range 3 Tine Ripper ...... 17 Cosmo Tow Type Spinner Spreaders ...... 35 Kanga H Range 3 Tine Ripper ...... 17 Cosmo Twin Spin Super Spreaders ...... 36 Kanga S Tine Cultivator ...... 18 Cosmo Pendulum Super Spreader ...... 38 Kanga Sub-Soil Cultivator - Tool Bar ...... 19 Cosmo 3-PL Cement Mixer ...... 40 Kanga Sub-Soil Cultivator - Tine Options ...... 19 Sicma Finishing Mower ...... 41

www.farmimplements.com.au T: (03) 9706 5166 F: (03) 9706 5050 Email: [email protected]

Farm Implements P/L reserves the right to change design, specifi cation and price without notice. Prices are recommended retail (RRP) only and DO NOT include freight. Freight terms are ex-works Dandenong, Victoria. Individual distributors prices may vary. 2

Mini Range Rotary Cutter

High speed gearbox ensures blade tip speed and quality of cut is not compromised

Deck Material Fully welded 2.5mm top, 5mm side walls Deck Profi le Folded, ‘clean top’ design, square back Deck Reinforcing 25x8mm full sub-frame Gearbox 50hp (540rpm) 1:2.83 ratio with 6 spline input shaft PTO Shaft Series 4 (35hp/26kw), triangular profi le tube, safety covers with patent lever release Clutch 150mm (6”) 2 plate safety clutch Finish Powder coated baked enamel Tower Multi-mount, 65x10mm, double clevis, fl oating Tower Offset Positive locking, multi-mount (centre mount with 150mm (6”) left or right offset) Tower Chain 8mm T80 rated chain (max. load 2000kg) Skids Adjustable skid (20-110mm), 6mm wall, 10mm runner Cutter Bar 90mm bolt together, cuphead blade bolts Blades 8mm stepped down, hardened carbon/chrome (spring steel), replaceable bush Linkage/Mounting Double clevis, category 1 lower linkage, category 1 pins and clips Front and Rear Chains 6mm front and rear safety chains with wire rope replacement system

Multi mount sliding tower Blade bolt inspection cap Waterproof manual holder Cutter bar

Cutting Overall Weight Tip Speed RRP Code Description Width Width (kg) (ft/min) (inc. GST) 1000 1175 KSMN100 Kanga Mini Range 1000 Rotary Cutter (32850) 180 16803 3’-4” 3’-11” 1200 1375 KSMN120 Kanga Mini Range 1200 Rotary Cutter (32750) 205 19203 3’-11” 4’-6”

100.411 Mini stepped slasher blades (pair) 100.412 Mini Range rotary cutter bolt kit (set of nuts, ‘Plough’ bolts and bushes) 100.413 Mini slasher bolt kit (set of nuts, M16 bolts and bushes). Suit slashers Pre-2008.

Farm Implements P/L reserves the right to change design, specifi cation and price without notice. Prices are recommended retail (RRP) only and DO NOT include freight. Freight terms are ex-works Dandenong, Victoria. Individual distributors prices may vary. 3

S Range Rotary Cutter

Deck Material Fully welded 3mm top, 6mm side walls Deck Profi le Formed, ‘clean top’ design, rounded back Deck Reinforcing 25x12mm full sub-frame Gearbox 40hp (540rpm) 1:1.93 ratio with 6 spline input shaft PTO Shaft Series 4 (35hp/26kw), triangular profi le tube, safety covers with patent lever release Clutch 150mm (6”) 2 plate safety clutch Finish Deck: hot dipped galvanized Other parts: powder coated Optional depth wheel Tower Multi-mount, 75x12mm, double clevis, fl oating Tower Offset Positive locking multi-mount (centre mount with 200mm (8”) left or right offset) Tower Chain 10mm T80 rated chain (max. load 3000kg) Skids Adjustable skid (35-125mm), 6mm wall, 12mm runner Cutter Bar 100mm bolt together, drive lugs, counter sunk blade bolts Blades Hardened, carbon/chrome (spring steel), stepped down, twisted, replaceable bush Linkage/Mounting Double clevis, category 1 and 2 lower linkage, category 1 pins and clips Front and Rear Chains 6mm front and rear safety chains with wire rope replacement system

Multi mount sliding tower Blade bolt inspection cap Blade exclusion zones Waterproof manual holder Countersunk blade bolts

Cutting Overall Weight Tip Speed RRP Code Description Width Width (kg) (ft/min) (inc. GST) 1200 1410 KSSR120 Kanga S Range 1200 Rotary Cutter (31000) 250 13119 3’-11” 4’-8” 1350 1556 KSSR135 Kanga S Range 1350 Rotary Cutter (30000) 280 14759 4’-5” 5’-1” 1500 1710 KSSR150 Kanga S Range 1500 Rotary Cutter (29000) 300 16399 4’-11” 5’-8”

KSRDW S Range rotary cutter single depth wheel (weighs 56kg) (32200) 100.134 Stepped slasher blades (pair) 100.135 Round back rotary cutter bolt kit (set of nuts, bolts and bushes) 100.136 Old square design slasher bolt kit (set of nuts, bolts and bushes). Suit slashers Pre-2008.

Farm Implements P/L reserves the right to change design, specifi cation and price without notice. Prices are recommended retail (RRP) only and DO NOT include freight. Freight terms are ex-works Dandenong, Victoria. Individual distributors prices may vary. 4

M Range Rotary Cutter

Deck Material Fully welded 4mm top, 8mm side walls Deck Profi le Formed, ‘clean top’ design, rounded back Deck Reinforcing 32x12mm full sub-frame Gearbox 75hp (540rpm) 1:1.93 (1500 and 1800mm) or 1:1.46 (2100mm) ratio with 6 spline input shaft PTO Shaft/Clutch Integral, Series 6 (64hp/48kw), two plate clutch/shaft, patent lever release covers, ‘triangular’ profi le drive tube Finish Deck: hot dipped galvanized Other parts: powder coated Tower Multi-mount, 75x16mm, double clevis, fl oating Tower Offset Positive locking, multi-mount (centre mount with 200mm (8”) left or right offset) Tower Chain 13mm T80 rated chain (max. load 4500kg) Optional depth wheel Skids Adjustable skid (35-125mm), 6mm wall, 12mm runner Cutter Bar 100mm bolt together, drive lugs, counter sunk blade bolts Blades Hardened, carbon/chrome (spring steel), stepped down, twisted, replaceable bush Linkage/Mounting Double clevis, category 1 and 2 lower linkage, category 2 pins and clips Front and Rear Chains 8mm front and rear safety chains with wire rope replacement system

Multi mount sliding tower Blade bolt inspection cap Blade exclusion zones Waterproof manual holder Countersunk blade bolts

Cutting Overall Weight Tip Speed RRP Code Description Width Width (kg) (ft/min) (inc. GST) 1500 1710 KSMR150 Kanga M Range 1500 Rotary Cutter (27000) 390 16399 4’-11” 5’-8” 1800 2010 KSMR180 Kanga M Range 1800 Rotary Cutter (26000) 490 19557 5’-11” 6’-7” 2100 2310 KSMR210 Kanga M Range 2100 Rotary Cutter (25000) 530 17368 6’-11” 7’-7”

KHRDW XH/H/M Range rotary cutter single depth wheel (weighs 67kg) (25600) 100.134 Stepped slasher blades (pair) 100.135 Round back rotary cutter bolt kit (set of nuts, bolts and bushes) 100.136 Old square design slasher bolt kit (set of nuts, bolts and bushes). Suit slashers Pre-2008.

Farm Implements P/L reserves the right to change design, specifi cation and price without notice. Prices are recommended retail (RRP) only and DO NOT include freight. Freight terms are ex-works Dandenong, Victoria. Individual distributors prices may vary. 5

H Range Rotary Cutter

Deck Material Fully welded 5mm top, 10mm side walls Deck Profi le Formed, ‘clean top’ design, rounded back Deck Reinforcing 32x16mm full sub-frame Gearbox 130hp (540rpm) 1:1.92 (1800mm) or 1:1.467 (2100mm) ratio with 20 spline input shaft Four (4) blade disc rotor Optional depth wheel PTO Shaft/Clutch Intergral, Series 8 (110hp/82kw), two plate clutch/shaft, patent lever release covers, greasable ‘triangular’ profi le tube Finish Deck: hot dipped galvanized. Other parts: powder coated Tower Multi-mount, 90x16mm, double clevis, fl oating Tower Offset Positive locking, multi-mount (centre mount with 200mm (8”) left or right offset) Tower Chain 13mm T80 rated chain (max. load 4500kg) Skids Adjustable skid (65 - 145mm), 8mm wall, 16mm runner Cutter Bar 130mm spring steel, bolt together, drive lugs, counter sunk blade bolts Blades Hardened, carbon/chrome (spring steel), stepped down, twisted, replaceable bush Linkage/Mounting Double clevis, category 2 linkage, pins and clips Front and Rear Chains 10mm front and rear safety chains with wire rope replacement system

Multi mount sliding tower Blade bolt inspection cap Blade exclusion zones Waterproof manual holder Countersunk blade bolts

Cutting Overall Weight Tip Speed RRP Code Description Width Width (kg) (ft/min) (inc. GST) 1800 2034 KSHR180 Kanga H Range 1800 Rotary Cutter (22000) 610 19557 5’-11” 6’-8” 2100 2334 KSHR210 Kanga H Range 2100 Rotary Cutter (21500) 705 17368 6’-11” 7’-8”

KHRDW XH/H/M Range rotary cutter single depth wheel (weighs 67kg) (25600) 100.134 Stepped slasher blades (pair) 100.135 Round back rotary cutter bolt kit (set of nuts, bolts and bushes) 100.136 Old square design slasher bolt kit (set of nuts, bolts and bushes). Suit slashers Pre-2008. 100.180 High tensile bisalloy four (4) blade disc rotor (suit 1800 H/XH cutters) (adds 140kg) 100.170 High tensile bisalloy four (4) blade disc rotor (suit 2100 H/XH cutters) (adds 200kg) 100.185 Upgrade H1800 Cutter Bar (XH Range) 100.186 Upgrade H2100 Cutter Bar (XH Range) 100.187 Upgrade to W2600 PTO Shaft (130hp/97kw)

Farm Implements P/L reserves the right to change design, specifi cation and price without notice. Prices are recommended retail (RRP) only and DO NOT include freight. Freight terms are ex-works Dandenong, Victoria. Individual distributors prices may vary. 6

3PL Twin Rotor Rotary Cutter - 50hp

This light duty rotary cutter is suitable for smaller horse powered tractors. Its twin rotor design gives people the ability to cut a wider area than would be possible with a traditional unit. Three high speed gear boxes ensure blade tip speed and quality of cut is not compromised. This Twin Rotor Cutter can also be ordered as a ‘twin side discharge’ machine for use in vineyards and orchards.* Deck Material Fully welded 3mm top, 10mm side walls, heavy duty angle/fl at bar Deck Profi le Folded, ‘clean top’ design, reinforced linkage points Gearboxes 1 x 50hp three-way & 2 x 50hp right angle gearboxes PTO Shaft Series 6 (64hp/48kw), triangular tube, safety covers with patent lever release Clutch 200mm (8”), 2 plate safety clutch Drive Line Direct drive splined shaft (except 1.8m (6’-0”) model which has nylon couplings) Finish High build oxide primer, high quality equipment enamel top coat Tower 65x12mm, fl oating, 10mm high tensile chain stays (max. load 3000kg) Skids Adjustable skid (25-100mm), 6mm wall, 12mm runner Cutter Bar Bolt together, drive lugs Blades Hardened, carbon/chrome (spring steel), stepped down, hardened bush Linkage/Mounting Double clevis, category 1 lower linkage, category 1 pins and clips Wheels Solid rubber wheels on 360° turning fork assembly Discharge Rear discharge is standard model. Side discharge is optional* * Please be advised of additional cost to covert machine to ‘Twin Side Discharge’

Tractor Cutting Overall Tip Speed RRP Code Description HP Width Width (ft/min) (inc. GST) 1300 1470 KMH50-135 Kanga 1350 (4'-6") Light Duty Twin Rotor Cutter (39400) 20 - 50 11237 4’-3” 4'-10" 1450 1620 KMH50-150 Kanga 1500 (5’-0”) Light Duty Twin Rotor Cutter (39500) 25 - 50 12463 4'-9" 5'-4" 1750 1920 KMH50-180 Kanga 1800 (6’-0”) Light Duty Twin Rotor Cutter (39600) 30 - 50 14733 5’-8” 6’-4”

KMH50-RR Height adjustable rear roller (in lieu of dual wheels) KMH50-TSD Convert machine to twin side discharge (for vineyards/orchards) 100.411 Mini stepped slasher blades (pair) 100.413 Mini slasher bolt kit (set of two (2) nuts, bolts, bushes)

Farm Implements P/L reserves the right to change design, specifi cation and price without notice. Prices are recommended retail (RRP) only and DO NOT include freight. Freight terms are ex-works Dandenong, Victoria. Individual distributors prices may vary. 7

3PL Twin Rotor Rotary Cutter

A heavy duty, fully reinforced twin rotor cutter that is ideal for tough operating conditions like roadsides, contacting and general council work. This cutter comes with twin 360° spinning solid wheels and spring steel cutter bars. It can also be ordered as a ‘twin side discharge’ machine for use in vineyards and orchards.*

Deck Material Fully welded 5mm top, 10mm side walls , heavy duty angle/fl at bar Deck Profi le Folded, ‘clean top’ design, reinforced linkage points Gearboxes 1 x 90hp three-way & 2 x 75hp right angle gearboxes PTO Shaft Series 6 (64hp/48kw), triangular tube, safety covers with patent lever release Clutch 200mm (8”), 2 plate safety clutch, built in free wheel Drive Line Heavy duty spring cushion couplings Finish Deck: hot dipped galvanized. Other parts: high quality equipment enamel Tower Fully welded, reinforced 8mm plate tower/stays Skids Adjustable skid (25-100mm), 6mm wall, 12mm runner Cutter Bar Bolted spring steel, drive lugs Blades Hardened, spring steel, stepped down, twisted left and right, hardened bush Linkage/Mounting Double clevis, category 2 and 3, category 2 pins and clips Wheels Solid rubber wheels on 360° turning fork assembly Discharge Rear discharge is standard model. Side discharge is optional* * Please be advised of additional cost to covert machine to ‘Twin Side Discharge’

Cutting Overall Tip Speed RRP Code Description Width Width (ft/min) (inc. GST) 1800 1960 KMH075-1.8 Kanga 1.8m (5’-11”) Heavy Duty Twin Rotor Cutter (38000) 15119 5’-11” 6'-6" 2100 2260 KMH075-2.1 Kanga 2.1m (6'-11") Heavy Duty Twin Rotor Cutter (38500) 16733 6’-11” 7’-5” 2400 2560 KMH075-2.4 Kanga 2.4m (7’-11”) Heavy Duty Twin Rotor Cutter (39000) 19619 7’-11” 8'-5 2920 3120 KMH130-3.0 Kanga 3.0m (10’-0”) Heavy Duty Twin Rotor Cutter (540 PTO) 130hp (39100) 16563 9’-7” 10’-3” 2920 3120 KMH200-3.0 Kanga 3.0mm (10’-0”) Heavy Duty Twin Rotor Cutter (1000 PTO) 200hp (39200) 15710 9’-7” 10’-3”

KMH-TSD Convert machine to twin side discharge (for vineyards/orchards) KMH-FR 75hp heavy duty front roller (each) KMH-RRM Single rear roller with manual adjustment (in lieu of dual wheels) KMH-RRH Single rear roller with hydraulic ram, hoses & fi ttings (in lieu of dual wheels) 220.086 Left hand (anti-clockwise) ‘orchard/vineyard’ blade (price per blade) 220.087 Right hand (clockwise) ‘orchard/vineyard’ blade (price per blade) 100.136 Blade bolt kit (set of two (2) nuts, bolts, bushes)

Farm Implements P/L reserves the right to change design, specifi cation and price without notice. Prices are recommended retail (RRP) only and DO NOT include freight. Freight terms are ex-works Dandenong, Victoria. Individual distributors prices may vary. 8

3PL Pasture Topper

Rear anti scalping skid

A 3PL twin rotor machine complete with adjustable skids, spring steel cutter bars, stepped suction blades and an adjustable rear safety fl ap. The Kanga Pasture Topper is an essential tool for dairy farms. With continual use this Pasture Topper will improve the quality and quantity of pasture over time.

Deck Material Fully welded 6mm top, 10mm side walls Deck Profi le Folded, ‘clean top,’ high open back design, hydraulically operated rear fl ap Deck Reinforcing Reinforced, heavy duty, one piece, channel chassis Gearboxes 2.4m (8’-0”) Topper = 1 x 90hp three-way and 2 x 75hp right angle gearboxes 3.0m (10’-0”) Topper = 1 x 130hp three-way and 2 x 130hp right angle gearboxes PTO Shaft 2.4m (8’-0”) Topper = Series 8 (106hp/79kw), triangular tube, patented safety covers 3.0m (10’-0”) Topper = Series W2600 (120hp/90kw), star tube, patented safety covers Clutch 2.4m (8’-0”) Topper = 60hp heavy duty, 4 plate safety clutch with built in free-wheel 3.0m (10’-0”) Topper = 150hp heavy duty, 6 plate safety clutch with built in free-wheel Drive Line 2.4m (8’-0”) Topper = Spring cushion couplings 3.0m (10’-0”) Topper = Heavy duty 20 spline spring cushion couplings Finish Deck: hot dipped galvanized. Other parts: high quality equipment enamel Tower Fully welded, reinforced, 10mm plate tower/stays Skids Positive locking, height adjustable skid, 6mm wall, 12mm runner Cutter Bar 2.4m (8’-0”) Topper = 100mm spring steel, bolt together, drive lugs 3.0m (10’-0”) Topper = 130mm spring steel, bolt together, drive lugs Blades Hardened, spring steel, stepped down, twisted left and right, hardened bush Linkage/Mounting Double clevis, category 2 and 3 lower linkage, category 2 pins and clips

Cutting Overall Tip Speed RRP Code Description Width Width (ft/min) (inc. GST) 2340 2540 KT090-2.4 Kanga 2400 (8'-0") 90hp (540 PTO) Pasture Topper (33000) 19619 7’-8” 8'-4" 2920 3120 KT130-3.0 Kanga 3000 (10'-0") 130hp (540 PTO) Pasture Topper (34000) 16563 9'-7" 10’-3” 2920 3120 KT200-3.0 Kanga 3000 (10’-0”) 200hp (1000 PTO) Pasture Topper (34500) 15710 9’-7” 10’-3”

220.086 Left hand (anti-clockwise) ‘orchard/vineyard’ blade (price per blade) 220.087 Right hand (clockwise) ‘orchard/vineyard’ blade (price per blade) 100.136 Blade bolt kit (set of two (2) nuts, bolts, bushes)

Farm Implements P/L reserves the right to change design, specifi cation and price without notice. Prices are recommended retail (RRP) only and DO NOT include freight. Freight terms are ex-works Dandenong, Victoria. Individual distributors prices may vary. 9

Trailing Pasture Topper

A trailing twin rotor topper with hydraulic height control (front and rear), adjustable skids, spring steel cutter bars, stepped suction blades, pneumatic wheels, wide angle PTO shaft and a rear safety fl ap. This Pasture Topper has been designed for irrigated pastures, and is an essential tool for dairy farms looking to improve the quality and quantity of pastures.

Deck Material Fully welded 6mm top, 10mm side walls Deck Profi le Folded, ‘clean top,’ high open back design, rear fl ap Deck Reinforcing Reinforced, heavy duty, one piece, channel chassis Gearboxes 3.0m (10’-0”) = 1 x 130hp three-way and 2 x 130hp right angle gearboxes 3.6m (12’-0”) = 1 x 200hp three-way and 2 x 200hp right angle gearboxes PTO Shaft Wide angle, Series W2600 (120hp/90kw), star tube, safety covers with patent lever release Clutch 150hp heavy duty, 6 plate safety clutch with built in free-wheel Drive Line Heavy duty, 20 spline, spring cushion couplings Finish High build oxide primer, high quality equipment enamel top coat Tower Fully welded, reinforced, 10mm plate tower fl oating tow hitch Skids Positive locking, height adjustable, skid, 6mm wall, 12mm runner Cutter Bar 130mm spring steel, bolt together, drive lugs Blades Hardened, spring steel, stepped down, twisted left and right, hardened bush Linkage/Mounting Hydraulically height adjustable tow hitch Wheels Hydraulically height adjustable pneumatic (15-9.00) ‘highway’ implement tyres

Cutting Overall Tip Speed RRP Code Description Width Width (ft/min) (inc. GST) 2920 3120 KTT130-3.0 Kanga 3000 (10'-0") 130hp (540 PTO) Trailing Pasture Topper (35000) 16563 9'-7" 10'-3" 2920 3120 KTT200-3.0 Kanga 3000 (10'-0") 200hp (1000 PTO) Trailing Pasture Topper (35500) 15710 9’-7” 10'-3" 3540 3720 KTT130-3.6 Kanga 3600 (12’-0”) 200hp (1000 PTO) Trailing Pasture Topper (36000) 18852 11’-7” 12’-3”

220.086 Left hand (anti-clockwise) ‘orchard/vineyard’ blade (price per blade) 220.087 Right hand (clockwise) ‘orchard/vineyard’ blade (price per blade) 100.136 Blade bolt kit (set of two (2) nuts, bolts, bushes)

Farm Implements P/L reserves the right to change design, specifi cation and price without notice. Prices are recommended retail (RRP) only and DO NOT include freight. Freight terms are ex-works Dandenong, Victoria. Individual distributors prices may vary. 10

3PL Tri-Rotor Rotary Cutter

A heavy duty, galvanised, three (3) rotor, Rotary Cutter designed and manufactured to operate in tough conditions. Standard features include: twin 360° spinning solid wheels, spring steel cutter bars, stepped suction blades, adjustable skids and spring cushion couplings that eliminate shock loads and vibrations between gearboxes.

Deck Material Fully welded 6mm top, 10mm side walls Deck Profi le Folded, ‘clean top’ design Gearboxes 130hp model =1 x 150hp four-way and 2 x 130hp right angle gearboxes 200hp model = 1 x 200hp four-way and 2 x 200hp right angle gearboxes PTO Shaft Series W2600 (120hp/90kw), star tube, safety covers with patent lever release Clutch 200hp heavy duty, 6 plate safety clutch with built in free-wheel Drive Line Heavy duty spring cushion couplings with W2600 Series drive shafts Finish Deck: hot dipped galvanized. Other parts: high quality equipment enamel Tower Fully welded, reinforced, 10mm plate tower/stays Skids Positive locking, height adjustable skid, 6mm wall, 12mm runner Cutter Bar Spring steel, bolt together, drive lugs Blades Hardened, spring steel, stepped down, twisted left and right with hardened bush Linkage/Mounting Double clevis, category 2 and 3 lower linkage, category 2 pins and clips Wheels Dual solid rubber wheels on 360° turning fork assembly Discharge Rear discharge only

Cutting Overall Tip Speed RRP Code Description Width Width (ft/min) (inc. GST) 3520 3720 KTH130-3.6 Kanga 3600 (12’-0”) 130hp Tri-Rotor Rotary Cutter (540 PTO) (37000) 13119 11'-6" 12’-3” 4420 4620 KTH130-4.5 Kanga 4500 (15’-0”) 130hp Tri-Rotor Rotary Cutter (540 PTO) (37100) 16373 14'-6" 15'-2" 5320 5520 KTH130-5.4 Kanga 5400 (18’-0”) 130hp Tri-Rotor Rotary Cutter (540 PTO) (37200) 19374 17’-6” 18'-1" 3520 3720 KTH200-3.6 Kanga 3600 (12’-0”) 200hp Tri-Rotor Rotary Cutter (1000 PTO) (37300) 18437 11'-6" 12'-3" 4420 4620 KTH200-4.5 Kanga 4500 (15’-0”) 200hp Tri-Rotor Rotary Cutter (1000 PTO) (37400) 13609 14’-6” 15'-2" 5320 5520 KTH200-5.4 Kanga 5400 (18’-0”) 200hp Tri-Rotor Rotary Cutter (1000 PTO) (37500) 16378 17’-6” 18’-1”

KTHFLEX ‘FLEX’ Modifi cation (for orchards with 'delving' rows) 220.086 Left hand (anti-clockwise) ‘orchard/vineyard’ blade (price per blade) 220.087 Right hand (clockwise) ‘orchard/vineyard’ blade (price per blade) 100.136 Blade bolt kit (set of two (2) nuts, bolts, bushes)

Farm Implements P/L reserves the right to change design, specifi cation and price without notice. Prices are recommended retail (RRP) only and DO NOT include freight. Freight terms are ex-works Dandenong, Victoria. Individual distributors prices may vary. 11 Mini Range Grader Blade

Headstock Material Welded, reinforced 80x80x4mm RHS Mouldboard Pressed 6mm mouldboard with channel reinforcing and 10mm turn table Cutting Edge 150mm heat hardened carbon/chrome (spring steel) reversible Finish Powder coated baked enamel Linkage/Mounting Double clevis category 1. Supplied with category 1 pins and clips Offset 3 positions left and right Tilt Using lower linkage pin holes and tractor linkage arms Angle 28 positions over 360°

Weight Tractor RRP Code Description (kg) (hp) (inc. GST) KB120 Kanga 1200 (4’-0”) Mini Range Adjustable Grader Blade (45000) 122 18 - 30

KBDW120 1200mm grader blade depth wheel (45900)

S Range grader blade

Mini Range adjustable grader blade

S Range Grader Blade Headstock Material Welded, reinforced 100x100 x4mm RHS Mouldboard Pressed 6mm mouldboard with channel reinforcing and 12mm turn tables Cutting Edge 150mm heat hardened carbon/chrome (spring steel) reversible Finish Powder coated baked enamel Linkage/Mounting Category 1 and 2 top. Category 1 lower. Both double clevis and supplied with category 1 pins and clips Offset 3 positions left and right Tilt Using lower linkage pin holes and tractor linkage arms Angle 28 positions over 360°

Weight Tractor RRP Code Description (kg) (hp) (inc. GST) KB180 Kanga 1800 (6’-0”) S Range Grader Blade (44000) 229 18 - 35

KBDWS S Range grader blade depth wheel (46000)

Farm Implements P/L reserves the right to change design, specifi cation and price without notice. Prices are recommended retail (RRP) only and DO NOT include freight. Freight terms are ex-works Dandenong, Victoria. Individual distributors prices may vary. 12 M Range Grader Blade Headstock Material Welded, reinforced 100x100x6mm RHS Mouldboard Pressed 8mm mouldboard with channel reinforcing and 16mm turn tables Cutting Edge 150mm heat hardened carbon/chrome (spring steel) reversible Finish Powder coated baked enamel Linkage/Mounting Category 1 and 2 top. Category 1 lower. Both double clevis and supplied with category 1 pins and clips Offset 5 positions left and right Tilt Standard model – Using lower linkage pin holes and tractor linkage arms Tilting model – 0-35° left or right Angle 28 positions over 360°

Weight Tractor RRP Code Description (kg) (hp) (inc. GST) KBM180 Kanga 1800 (6’-0”) M Range Grader Blade (43000) 286 30 - 60 KBM180-TM Kanga 1800 (6’-0”) M Range ‘Tilting’ Grader Blade – Manual (43250) 310 30 - 60 KBM180-TH Kanga 1800 (6’-0”) M Range ‘Tilting’ Grader Blade – Hydraulic (43500) 315 30 - 60

KBDWM M Range grader blade depth wheel (46250)

Tilting grader blade

Multi Clamp grader blade M Range grader blade Multi Clamp Grader Blade

Headstock Material Fully welded and reinforced pipe and RHS construction Mouldboard Pressed 8mm mouldboard with channel reinforcing Movement Via Locking wedges (dog clamps) Cutting Edge 150mm heat hardened carbon/chrome (spring steel) reversible Finish High build oxide primer with high quality equipment enamel top coat Linkage/Mounting Double clevis category 1 and 2 linkage with category 1 pins and clips Offset 0-45° in 5° increments left or right Tilt 0-45° in 5° increments left or right Angle 0-45° in 5° increments left or right

Weight Tractor RRP Code Description (kg) (hp) (inc. GST) KBMC180 Kanga 1800 (6’-0”) Multi (‘DOG’) Clamp Grader Blade (41000) 345 35 - 60 KBMC240 Kanga 2400 (8’-0”) Multi (‘DOG’) Clamp Grader Blade (40000) 385 40 - 70

KBDWMC Multi Clamp grader blade depth wheel (46500)

Farm Implements P/L reserves the right to change design, specifi cation and price without notice. Prices are recommended retail (RRP) only and DO NOT include freight. Freight terms are ex-works Dandenong, Victoria. Individual distributors prices may vary. 13 H Range Grader Blade Headstock Material 150x150x5mm RHS, fully welded and reinforced Mouldboard 8mm reinforced and gusseted with 16mm turntables Movement Via 75mm (3”) hydraulic rams or manual ratchet adjustment Cutting Edge 150mm heat hardened carbon/chrome (spring steel) reversible Finish High build oxide primer with high quality equipment enamel top coat Linkage/Mounting Double clevis category 2 lower linkage with pins and clips Offset Variable - up to 20° left and right Tilt Variable - up to 30° left and right Manual Adjustment - Angle Variable - up to 30° left and right ratchet jack with lock nut

Weight Tractor RRP Code Description (kg) (hp) (inc. GST) KBH180M Kanga 1800 (6’-0”) H Range, Manual Adjustment Grader Blade (47450) 485 50 - 90 KBH180H Kanga 1800 (6’-0”) H Range, 3 Ram Hydraulic Grader Blade (47400) 500 50 - 90 KBH240M Kanga 2400 (8’-0”) H Range, Manual Adjustment Grader Blade (47350) 515 50 - 90 KBH240H Kanga 2400 (8’-0”) H Range, 3 Ram Hydraulic Grader Blade (47300) 530 50 - 90

KBHDWM H Range grader blade manual depth wheel (48100) KBHDWH H Range grader blade hydraulic depth wheel (48200) KBHDV H Range grader blade hydraulic diverter value system (48300)

H Range with optional depth wheel XH Range

XH Range Grader Blade Headstock Material 150x150x9mm RHS, fully welded and reinforced Mouldboard 10mm reinforced and gusseted with 20mm turntables Movement Via 100mm (4”) hydraulic rams complete with hoses and fi ttings Cutting Edge 150mm heat hardened carbon/chrome (spring steel) reversible Finish High build oxide primer with high quality equipment enamel top coat Linkage/Mounting Double clevis category 2 lower linkage with pins and clips Offset Variable - Up to 20° left and right Tilt Variable - Up to 30° left and right Angle Variable - Up to 30° left and right

Weight Tractor RRP Code Description (kg) (hp) (inc. GST) KBXH240 Kanga 2400 (8’-0”) XH Range, 3 Ram Hydraulic Grader Blade (47000) 615 90 - 130 KBXH300 Kanga 3000 (10’-0”) XH Range, 3 Ram Hydraulic Grader Blade (47200) 795 90 - 130

KBXHDWM XH Range grader blade manual depth wheel (47500) KBXHDWH XH Range grader blade hydraulic depth wheel (47600) KBXHDV XH Range grader blade hydraulic diverter value system (47700)

Farm Implements P/L reserves the right to change design, specifi cation and price without notice. Prices are recommended retail (RRP) only and DO NOT include freight. Freight terms are ex-works Dandenong, Victoria. Individual distributors prices may vary. 14

Mini Range Post Hole Digger Boom Profi le Right angle frame in 80x80x4 RHS A Frame Profi le Double clevis ‘A’ frame in 12mm fl at bar Gearbox 35hp (2.92:1) with 6 spline input shaft PTO Shaft Series 4 (35hp/26kw), triangular profi le tube and safety covers with patent lever release Clutch 150mm (6”) 2 plate safety clutch Finish Powder coated baked enamel Augers Sizes from 100mm (4”) to a maximum 300mm (12”). Refer page 15

Weight Tractor RRP Code Description (kg) (hp) (inc. GST) KPHD35 Kanga 30hp Mini Range Post Hole Digger, excluding auger (52000) 96.1 15 - 35

M Range Post Hole Digger Boom Profi le Right angle frame in 100x100x6 RHS A frame Profi le Double clevis ‘A’ frame in 12mm fl at bar Gearbox 50hp (3.18:1), 6 spline input shaft PTO Shaft Series 4 (35hp/26kw), triangular profi le tube, safety covers with patent lever release Clutch 150mm (6”) 2 plate safety clutch Finish Powder coated baked enamel Augers Sizes from 100mm (4”) to 610mm (24”). Refer page 15

Weight Tractor RRP Code Description (kg) (hp) (inc. GST) KPHD50 Kanga 50hp M Range Post Hole Digger, excluding auger (51000) 133.6 30 - 75

H Range Post Hole Digger Boom Profi le Right angle frame in 100x100x6 RHS A Frame Profi le Double clevis ‘A’ frame in 12mm fl at bar Gearbox 75hp (4:1) with 6 spline input shaft PTO Shaft Series 4 (35hp/26kw), triangular profi le tube and safety covers with patent lever release Clutch 200mm (8”) 2 plate safety clutch Finish Powder coated baked enamel Augers Sizes from 100mm (4”) to 610mm (24”). Refer page 15

Weight Tractor RRP Code Description (kg) (hp) (inc. GST)

KPHD75 Kanga 75hp H Range Post Hole Digger, excluding auger (50000) 159.2 40+

Farm Implements P/L reserves the right to change design, specifi cation and price without notice. Prices are recommended retail (RRP) only and DO NOT include freight. Freight terms are ex-works Dandenong, Victoria. Individual distributors prices may vary. 15

XH Range Post Hole Digger

Profi le Heavy duty RHS in a dual rail confi guration A Frame Heavy duty RHS with shear bolts Gearbox 50hp (3.18:1) or 75hp (4:1) With 6 spline input shaft PTO Shaft Series 4 (35hp/26kw), triangular profi le tube and safety covers with patent lever release Clutch 200mm (8”) 2 plate safety clutch Finish Powder coated baked enamel Hydraulics 65mm (2.5”) hydraulic ram complete with hoses and fi ttings

Weight Tractor RRP Code Description (kg) (hp) (inc. GST) KPHD50-XH Kanga 50hp XH Range Post Hole Digger, excluding auger (56000) 206.4 40+ KPHD75-XH Kanga 75hp XH Range Post Hole Digger, excluding auger (55000) 210.5 50+

Post Hole Digger Augers

Profi le Agricultural augers suit all ranges of Kanga post hole diggers Construction Heavy duty 50mm tubing with 6mm fl ighting Cutting Head Clockwise double cut with replaceable teeth and pilot Height 1200mm (48”) Finish High build oxide primer with high quality equipment enamel top coat

Weight RRP Code Description (kg) (inc. GST) KPHDA04 Kanga 100mm (4”) Auger Only (50700) 13.5 KPHDA06 Kanga 150mm (6”) Auger Only (50600) 14.5 KPHDA09 Kanga 228mm (9”) Auger Only (50500) 19.5 KPHDA12 Kanga 300mm (12”) Auger Only (50400) 24.5 KPHDA15 Kanga 380mm (15”) Auger Only* (50300) 27.2 KPHDA18 Kanga 457mm (18”) Auger Only* (50200) 34.5 KPHDA24 Kanga 610mm (24”) Auger Only* (50100) 60.5

140.900 Standard dirt tooth (pair) 140.901 Chisel dirt tooth (pair) 140.906 Clockwise auger pilot (sb23 or sb30). Please specify on order. 140.909 Clockwise 100mm (4”) combined auger pilot and digging head * Not to be used on Kanga Mini Range Post Hole Diggers.

Farm Implements P/L reserves the right to change design, specifi cation and price without notice. Prices are recommended retail (RRP) only and DO NOT include freight. Freight terms are ex-works Dandenong, Victoria. Individual distributors prices may vary. 16 MINI Range Single Tine Ripper Profi le Fully welded, gusseted, RHS Linkage/Mounting Double clevis, category 1 linkage Tines 130x25mm, ‘chamfered’ edged Tine Point Heat hardened, carbon/chrome (spring steel), All single tine reversible rippers can be fi tted with Finish Powder coated baked enamel an optional pipelayer Max. Working Depth 350mm (1’-2”) Width 625mm (2’-1”)

Weight Tractor RRP Code Description (kg) (hp) (inc. GST) KRMN Kanga Mini Range Single Tine Ripper (13000) 38 12 - 25 KRPMN Kanga Mini Range Pipelayer (14500) n/a

160.100 Ripper point 160.101 Ripper point bolt set

M Range Single Tine Ripper Profi le Fully welded, gusseted, RHS Linkage/Mounting Double clevis, category 1 linkage Tines 150x32mm, ‘chamfered’ edged Tine Point Heat hardened, carbon/chrome (spring steel), reversible Finish Powder coated baked enamel Max. Working Depth 500mm (1’-8”) Width 800mm (2’-7”)

Weight Tractor RRP Code Description (kg) (hp) (inc. GST) KRMRS Kanga M Range Single Tine Ripper (12100) 68 25 - 50 KRPMR Kanga M Range Pipelayer (14250)

160.100 Ripper point 160.101 Ripper point bolt set

H Range Single Tine Ripper Profi le Fully welded, double gusseted heavy duty RHS Linkage/Mounting Double clevis category 1 and 2 Tine 150x32mm, ‘chamfered’ edged Tine Point Heat hardened, carbon/chrome (spring steel) reversible Finish Powder coated baked enamel Max. Working Depth 650mm (2’-2”) Width 850mm (2’-9”) Optional pipelayer

Weight Tractor RRP Code Description (kg) (hp) (inc. GST) KRHRS Kanga H Range Single Tine Ripper (12000) 86 35 - 80 KRPHR Kanga H Range Pipelayer (14000) n/a

160.100 Ripper point 160.101 Ripper point bolt set

Farm Implements P/L reserves the right to change design, specifi cation and price without notice. Prices are recommended retail (RRP) only and DO NOT include freight. Freight terms are ex-works Dandenong, Victoria. Individual distributors prices may vary. 17

M Range 3 Tine Ripper Profi le Fully welded, 100x100x5 RHS tool bar Linkage/Mounting Double clevis, category 1 linkage Tines Heavy duty,130 x 25mm, chamfered edged, height adjustable tine Tine Point Heat hardened, carbon/chrome (spring steel), reversible Finish Powder coated baked enamel Max. Working Depth 550mm (1’-10”) Width 950mm (3’-2”)

Weight Tractor RRP Code Description (kg) (hp) (inc. GST) KRM3 Kanga M Range 3 Tine Ripper (1100) 112 25 - 45

160.100 Ripper point 160.101 Ripper point bolt set

M Range

H Range

H Range 3 Tine Ripper Profi le Fully welded, 150x150x9mm tool bar Linkage/Mounting Double clevis, category 2 linkage Tines Heavy duty, 150 x 32mm, chamfered edged, height adjustable tine Tine Point Heat hardened, carbon/chrome (spring steel), reversible Finish Powder coated baked enamel Max. Working Depth 915mm (3’-0”) Width 2000mm (6’-7”)

Weight Tractor RRP Code Description (kg) (hp) (inc. GST) KRH3-M Kanga H Range 3 Tine Ripper – Mild Steel Tines (10000) 285 65 - 90 KRH3-B Kanga H Range 3 Tine Ripper – Bisalloy Tines (10100) 290 65 - 90

160.100 Ripper point 160.101 Ripper point bolt set

Farm Implements P/L reserves the right to change design, specifi cation and price without notice. Prices are recommended retail (RRP) only and DO NOT include freight. Freight terms are ex-works Dandenong, Victoria. Individual distributors prices may vary. 18

S Tine Cultivator

Profi le Heavy duty RHS (5mm), 16mm fl at bar Linkage/Mounting Double clevis category 2 and 3 linkage, category 2 pins and clip Type of Tine 10mm x 32mm high tensile ‘S’ tine with 390mm ground clearance Point High tensile, reversible Roller Height adjustable, hubbed and stubbed, twisted pipe Crumbler roller Finish High build primer, equipment enamel top coat with stub axle

Tractor RRP Code Description Overall Width* (hp) (inc. GST) KST2.4 Kanga 2400 S Tine (24 Tine) with Crumbler Roller (79000) 2.75m (6’-10”) 25 - 50 KST2.8 Kanga 2800 S Tine (28 Tine) with Crumbler Roller (80000) 3.15m (9’-11”) 30 - 60 KST3.0 Kanga 3000 S Tine (30 Tine) with Crumbler Roller (81000) 3.35m (11-0”) 40 - 80 KST3.2 Kanga 3200 S Tine (32 Tine) with Crumbler Roller (82000) 3.55m (11’-8”) 50+

KSTDDW Dual height control wheels suit Kanga S Tine cultivator (83000) 180.405 105mm (4”) Cultivator ‘sweep’ point** 180.406 150mm (6”) Cultivator ‘sweep’ point** * Working width (including roller) is 350mm (1’ 2”) less than overall width. ** Price is per point, based on supplying ‘sweep’ point in leiu of standand points.

Farm Implements P/L reserves the right to change design, specifi cation and price without notice. Prices are recommended retail (RRP) only and DO NOT include freight. Freight terms are ex-works Dandenong, Victoria. Individual distributors prices may vary. 19 Sub-Soil Cultivator - Tool Bar Heavy Duty reinforced dual rail frame allowing customers to customise their Sub-Soil Cultivator with one of the many Kanga tine assemblies. Profi le Fully welded/reinforced 100x100x9mm RHS dual frame Linkage Double clevis, category 2/3 linkage, category 2 pins and clips Finish High build primer, equipment enamel top coat

Overall Working # of RRP Code Description Width Width Tines* (inc. GST) 1800 1700 KSS180 Kanga 1800 (6’-0”) Sub-Soil Cultivator Tool Bar ONLY (75000) 5 5’-11” 5’-7” 2400 2300 KSS240 Kanga 2400 (8’-0”) Sub-Soil Cultivator Tool Bar ONLY (76000) 7 7'-11" 7’-7” 3000 2900 KSS300 Kanga 3000 (10’-0”) Sub-Soil Cultivator Tool Bar ONLY (77000) 9 9'-11" 9'-7" 3600 3500 KSS360 Kanga 3600 (12’-0”) Sub-Soil Cultivator Tool Bar ONLY (78000) 11 11’-10 11’-6”

KSSDDW Sub Soil cultivator dual depth wheels (78500)

* The number of tines is based on 330mm (13”) spacings. You can fi t more tines, however the more tines, the more tractor horsepower required to operate successfully.

Sub-Soil Cultivator with stump jump chisel plough tine

Sub-Soil Cultivator with ‘Ryan’ spring tine

Sub-Soil Cultivator Sub-Soil Cultivator - Tine Options with cast shear bolt A range of bolt on tine assemblies that can be fi tted to the Kanga Sub-Soil ripper tine Cultivator tool bar allowing customization for individual application.

Tine Type of Breakout Tractor HP RRP Code Description Depth** Protection Point (p/tine) (inc. GST) 610mm KSS-T24 Kanga 24" Cast Shear Bolt Ripper Tine Only (each) (79100) Shear Pin 5000kg 10 - 15hp 24" 762mm KSS-T30 Kanga 30” Cast Shear Bolt Ripper Tine Only (each) (79200) Shear Pin 5000kg 12 - 15hp 30" 520mm 250 lb/ft KSS-TCP Kanga Stump Jump Chisel Plough Tine Only (each) (79300) Spring 8 - 10hp 20” 372 kg/m 660mm 340 lb/ft KSS-TRT Kanga ‘Ryan’ Type Spring Tine Only (each) (79400) Spring 10 - 15hp 26” 506 kg/m ** Measured from bottom of the cultivator tool bar including the point and is a guide only. Depth will depend on soil type and conditions.

Farm Implements P/L reserves the right to change design, specifi cation and price without notice. Prices are recommended retail (RRP) only and DO NOT include freight. Freight terms are ex-works Dandenong, Victoria. Individual distributors prices may vary. 20

Carryalls

Tipping Box Carryall With back removed With back removed Overview Boxed tipping carryall for light general purpose duties. Removing the rear door converts the implement into tipping carryall. Heat hardened carbon leading edge. Profi le Reinforced plate with heavy duty tipping mechanism Finish Powder coated baked enamel Bucket Material 180 model = 6mm plate Linkage 180 model = category 1 and 2

W x H x D Max. load Weight Tractor RRP Code Description (cm) (kg) (kg) (hp) (inc. GST) KCT180 Kanga 1.8m Tipping Box Carryall (99300) 180 x 87 x 51 800 342 (300*) 40 - 80

* Weight when rear door has been removed.

Hydraulic Transport Box

Overview Hydraulically operated transport box/tipping carryall for general purpose duties. Profi le Solid robust contruction with reinforcing at all stress points. Inner ribs reinforce the bucket fl oor and there is a double acting ram with heavy duty tipping mechanism Removing the rear door converts the implement into tipping carryall. Heat hardened carbon leading edge. Finish Powder coated baked enamel Bucket Material 120 model = 3.5mm plate 160 model = 5mm plate 200 model = 6mm plate Linkage 120 model = category 1 160 model = category 1 and 2 200 model = category 1 and 2

W x H x D Max. load Weight Tractor RRP Code Description (cm) (kg) (kg) (hp) (inc. GST) KCTB120 Kanga 1.2m Hydraulic Transport Box (99450) 120 x 71 x 37 500 167 (150*) 18 - 40 KCTB160 Kanga 1.6m Hydraulic Transport Box (99550) 160 x 82 x 46 700 324 (287*) 35 - 60 KCTB200 Kanga 2.0m Hydraulic Transport Box (99650) 200 x 87 x 51 800 387 (340*) 50 - 100 * Weight when rear door has been removed.

Wood Floor Carryall Profi le Welded heavy duty RHS/angle frame Linkage/Mounting Category 1 bolt on lower linkage pins and clip Wood Floor Bolt in replacable, 25mm kiln dried Tasmanian Oak hard wood boards Finish Powered coated baked enamel

Weight RRP Code Description (kg) (inc. GST) KCWF120 Kanga 1200 (4’ x 3’) Wood Floor Carryall (98000) 53 KCWF150 Kanga 1500 (5’ x 3’) Wood Floor Carryall (98500) 68 KCWF180 Kanga 1800 (6’ x 3’6”) Wood Floor Carryall (99000) 85

Farm Implements P/L reserves the right to change design, specifi cation and price without notice. Prices are recommended retail (RRP) only and DO NOT include freight. Freight terms are ex-works Dandenong, Victoria. Individual distributors prices may vary. 21

Hydraulic Jib Crane Jib Crane

Manual Profi le Manual: Fully welded, reinforced Jib Crane 100x100x5mm RHS frame Hydraulic: A robust and durable steel construction with reinforced stress points Linkage/Mounting Manual: Cat 1 Double Clevis ‘A’ Frame manufactured from 12mm fl at bar Hydraulic: Cat 1 and 2 top and lower link points No. Lift Points Manual: Two (2) fi xed, reinforced positions Hydraulic: Three (3) position adjustable boom with swivel hook Operation Manual: Using a tractor’s 3-point linkage arms Hydraulic: Via a 2” hydraulic ram Finish Powder coated baked enamel

Capacity Weight RRP Code Description (max.) (kg) (inc. GST) KJCM Kanga Manual JIb Crane (96000) 500kg 68 KJCH Kanga Hydraulic Jib Crane (96500) 600kg 100

Bale Spike Profi le Fully welded RHS frame Linkage/Mounting Double clevis category 1 with pins and clips Type of Tine Small - high tensile (stop bale turning) Large - straight conus 2 tine (1240mm) with coned nut Finish Powder coated baked enamel

Weight RRP Code Description (kg) (inc. GST) KHH-BS Kanga Bale Spike (95000) 60

Silage Fork

Profi le Fully welded, gusseted, RHS/fl at frame Linkage/Mounting Double clevis category 1 and 2 linkage with pins and clip Type of Tine Straight conus 2 tines (1240mm) with coned nut Finish Powder coated baked enamel

Weight RRP Code Description (kg) (inc. GST) KHH-SF Kanga Silage Fork (94000) 87

Farm Implements P/L reserves the right to change design, specifi cation and price without notice. Prices are recommended retail (RRP) only and DO NOT include freight. Freight terms are ex-works Dandenong, Victoria. Individual distributors prices may vary. 22

Adjustable Round Bale Feed Out Fork Profi le Fully welded and reinforced heavy duty RHS Linkage/Mounting Double clevis category 1 linkage with category 1 pins and clip Type of Tine Reinforced 75x75x4 RHS, off set, adjustable Tine Adjustment Multiple positions between 1100 - 1700mm* Spikes Two (2) 50mm solid, tapered, locking Finish Powder coated baked enamel * Left and right tines are interchangeable and must be swapped to achieve full range of adjustment

Weight RRP Code Description (kg) (inc. GST) KHH-FOF Kanga Adjustable Round Bale Feed Out Fork (93000) 96

Disc Harrow Profi le 16 discs (4 gangs of 4) in an ‘X’ confi guration with individual greasable bearing housings Material Angle/fl at bar frame and tower Type of Disc 405mm (16”) notched disc Finish Powder coated baked enamel

Overall Weight Tractor RRP Code Description Width (kg) (hp) (inc. GST) 1500 KHDH1.5 Kanga 1.5m (5ft) Disc Harrow (91000) 215 15 - 35 4’-11”

Pasture Harrow Rake Overview Heavy duty folding harrows that connect to a tractors 3-point linkage. Ideal for rejuvinating arenas, breaking up hard ground, spreading manure and promoting new growth without the use of expensive fertilisers. Material Tube frame complete with one piece cast iron scarifi er net Linkage/Mounting Category 1 (3-point linkage) Finish Powder coated baked enamel

Folding model

Hydraulic model

Weight RRP Code Description (kg) (inc. GST) KHPR400 Kanga 4.0m (13-0”) Folding Harrow Rake (90500) 260 KHPR600 Kanga 6.0m (20’) Hydraulically Folding Pasture Harrow Rake (90550) 445

Farm Implements P/L reserves the right to change design, specifi cation and price without notice. Prices are recommended retail (RRP) only and DO NOT include freight. Freight terms are ex-works Dandenong, Victoria. Individual distributors prices may vary. 23

Combo Harrow

Overview A light duty harrow that is a simple and versatile means to pasture improvement. The front section lightly scarifys the surface of the ground breaking up any organic matter while the trailing ‘Chain Links’ evenly spreads it out. Designed for paddocks in a good to reasonable condition. Material Channel Tool Bar with One Piece Cast Iron Scarifi er net, tube middle Tool Bar and trailing ‘chain link’ spreading section from 10.5mm square bar Finish Powder coated baked enamel

Depth Overall Weight RRP Code Description (net Width (kg) (inc. GST) section) 1800 1960 / KHDH18 Kanga 1.8m (6ft) ‘Combo’ Drag Harrow (91100) 155 5’-11” 6’5” 2400 1960 / KHDH24 Kanga 2.4m (8ft) ‘Combo’ Drag Harrow (91200) 200 7'-11" 6’5” 3000 1960 / KHDH30 Kanga 3.0m (10ft) ‘Combo’ Drag Harrow (91300) 255 9'-11" 6’5” 3600 1960 / KHDH36 Kanga 3.6m (12ft) ‘Combo’ Drag Harrow (91400) 300 11’-10 6’5”

Chain Link Drag Harrow Overview Heavy duty ‘chain link’ drag harrow designed to follow the contours of the ground spreading organic material to stimulate new growth. Material Channel draw bar and ‘chain link’ spreading section from 10.5mm square bar Finish Powder coated baked enamel

Depth Overall Weight RRP Code Description (net Width (kg) (inc. GST) section) 1800 1475 KHCL1.8 Kanga 1.8m (6ft) Chain Link Drag Harrow (90060) 170 5’-11” 4’-10” 2400 1475 KHCL2.4 Kanga 2.4m (8ft) Chain Link Drag Harrow (90080) 230 7'-11" 4’-10” 3000 1475 KHCL3.0 Kanga 3.0m (10ft) Chain Link Drag Harrow (90100) 270 9'-11" 4’-10” 3600 1475 KHCL3.6 Kanga 3.6m (12ft) Chain Link Drag Harrow (90120) 340 11’-10 4’-10” 4800 1475 KHCL4.8 Kanga 4.8m (16ft) Chain Link Drag Harrow (90160) 460 15’-9” 4’-10” 6000 1475 KHCL6.0 Kanga 6.0m (20ft) Chain Link Drag Harrow (90200) 540 19’-8” 4’-10”

3-point linkage lifting frame to suit chain link drag harrow

Farm Implements P/L reserves the right to change design, specifi cation and price without notice. Prices are recommended retail (RRP) only and DO NOT include freight. Freight terms are ex-works Dandenong, Victoria. Individual distributors prices may vary. 24

Box Scraper Profi le Fully welded, rigid box blade, boxed tool bar Mould Board 430mm high, thickness of 4mm (1.2m), 5mm (1.8m) or 8mm (2.4m) Type of Tines High tensile height adjustable Cutting Edge 2 x 150mm heat hardened carbon/chrome (spring steel) Finish Powder coated baked enamel Linkage/Mounting Category 1 bolt on lower linkage pins and clip

No. of Weight Tractor RRP Code Description Overall Width Tines (kg) (hp) (inc. GST) K120BS Kanga 1.2m (4’-0”) Box Scraper (49500) 1230mm 4 150 15 - 30 K180BS Kanga 1.8m (6’-0”) Box Scraper (49000) 1830mm 6 205 25 - 35 K240BS Kanga 2.4m (8’-0”) Box Scraper (48500) 2440mm 8 290 30 - 50

Stick Rake Profi le Fully welded rigid RHS tool bar. The 1.8m and 2.4m are 50x50x4 RHS, the 3.0m frame uses both 75x50x4 and 50x50x4 RHS Linkage/Mounting Double clevis, category 1 lower linkage, category 1 lower link pins and clips Type of Tines 10mm x 32mm high tensile ‘S’ tine with 390mm ground clearance Tine Point High tensile reversible Tine Spacing Point to point 140mm (approx.) point to point.

Tractor RRP Code Description (hp) (inc. GST) KSR180 Kanga 1800 (6’-0”) Fixed Stick Rake, with 13 Tines (60100) 15 - 30 KSR240 Kanga 2400 (8’-0”) Fixed Stick Rake, with 17 Tines (60200) 25 - 40 KSR300 Kanga 3000 (10’-0”) Fixed Stick Rake, with 21 Tines (60300) 35 - 60

Farm Implements P/L reserves the right to change design, specifi cation and price without notice. Prices are recommended retail (RRP) only and DO NOT include freight. Freight terms are ex-works Dandenong, Victoria. Individual distributors prices may vary. 25

TB Series Flailil MMowerower

Mounting Measurements Model Centered Offset Max. Offset TB 110 767/434mm 467/734mm 300mm (12”) TB 125 767/584mm 467/884mm 300mm (12”) Measurements refer to distance left/right of centre

Suited Applications Multi purpose machine suited to grassy applications and light undergrowth, like bracken and blackberry bushes. Deck Material One piece 3mm, cold pressed formed and reinforced Gearbox High speed (540rpm) PTO Shaft Series 4 (35hp/26kw) triangular profi le tube and safety covers Drive System Belt driven using three (3) ‘SPA’ type belts Finish Premium quality agricultural enamel 540 rpm 1 Skids Adjustable between 15 - 150mm ( /2”- 4”) Wheels Full length roller with sealed bearings Linkage/Mounting Positive locking multi position tower, category 1 Blades 5mm carbon/chrome spring steel in ‘Y’ shape 2080 rpm

Overall Weight No. of Tractor RRP Code Description Width (kg) Blades (hp) (inc. GST) 1220 STB110 Sicma TB110 - 1.10m (43”) Flail Mower (40500) 158 52 / 26 15 - 35 48” 1380 STB125 Sicma TB125 - 1.25m (50”) Flail Mower (41500) 173 60 / 30 18 - 35 54”

S5815275 TB Series ‘Y’ blade S5535276 TB Series ‘Y’ blade spacer S5715103 TB Series hammer (optional)

Farm Implements P/L reserves the right to change design, specifi cation and price without notice. Prices are recommended retail (RRP) only and DO NOT include freight. Freight terms are ex-works Dandenong, Victoria. Individual distributors prices may vary. 26

TMX Series Flailail MMulcherulcher

Overseas model shown (hydraulic shift not included)

MountingMounting Measurements Model Centered Offset Max. Offset TMX155 770/895mm 490/1175mm 280mm (11”) TMX185 770/1195mm 490/1475mm 280mm (11”) Measurements refer to distance left/right of centre

Suited Applications Medium duty, duty multi purpose machine suitable for cutting in a wide range of applications like grass, light undergrowth, vineyard/orchard prunings and hazelnut groves. Deck Material One piece 5mm, cold pressed formed and reinforced Gearbox High speed (540rpm) PTO Shaft Series 5 (54hp/42kw), triangular profi le tube with safety covers Drive System Belt driven using ‘BX’ type belts Finish Premium quality agricultural enamel 540 rpm 3 3 Skids Adjustable between 18 - 70mm ( /4” - 2 /4”) Roller Full length roller with self lubricategorying bearings Linkage/Mounting Dual position, fi xed mounted tower, category 1 and 2 Blades 6mm carbon/chrome spring steel in ‘Y’ shape 2025 rpm

Overall Weight No. of Tractor RRP Code Description Width (kg) Blades (hp) (inc. GST) 1710 STMX155 Sicma TMX155 - 1.55m (55”) Flail Mulcher (52000) 341 40 / 20 30 - 50 6’-7” 2010 STMX185 Sicma TMX185 - 1.85m (73”) Flail Mulcher (53000) 364 48 / 24 40 - 50 7’-9”

S8683040 TMX Series fl ail mulcher dual wheels (in lieu of rear roller) S5815160 TMX Series fl ail mulcher ‘Y’ blade (standard) S5535710 TMX Series fl ail mulcher ‘Y’ blade bush S5715100 TMX Series fl ail mulcher hammer (optional)

Farm Implements P/L reserves the right to change design, specifi cation and price without notice. Prices are recommended retail (RRP) only and DO NOT include freight. Freight terms are ex-works Dandenong, Victoria. Individual distributors prices may vary. 27

Photographed with optional TR Series Flail Mulcher dual wheels and spreader vain kit

MountingMounting MeasurementsMeasurements Model Centered Offset Max. Offset TR200 1030/1005mm 790/1345mm 340mm (13”) TR255 1275/1400mm 935/1740mm 340mm (13”) Measurements refer to distance left/right of centre

SuitedSuited ApplicationsApplications MultiMulti purpose macmachinehine wwithith hihingednge rear fl ap. Flap can be fi xed open for easy extraction of grasses like straw and maize. Strong enough to handle vineyard and orchard prunings Deck Material One piece 5mm, cold pressed formed and reinforced Gearbox High speed (540/1000rpm) in oil bath with L1000 drive shaft PTO Shaft Series 6 (64hp/48kw), triangular tube and safety covers Drive System Belt driven using ‘SPB1550’ belts. TR200 (4). TR255 (5) Finish Premium quality agricultural enamel 540 rpm 1 3 Skids Adjustable between 32 - 95mm (1 /2” - 3 /4”) Roller Full length roller with self lubricating bearings Linkage/Mounting Dual position, fi xed, double clevis, category 1 and 2 Blades 6mm carbon/chrome spring steel in ‘Y’ shape 2052 rpm

Overall Weight No. of Tractor RRP Code Description Width (kg) Blades (hp) (inc. GST) 2160 STR200 Sicma TR 200 - 2.0m (79”) Flail Mulcher (56000) 688 44 / 22 60 - 90 85” 2700 STR255 Sicma TR 255 - 2.55m (100”) Flail Mulcher (56500) 832 56 / 28 75 - 90 106”

S5136580 TR Series fl ail mulcher grass defl ector (right) S5136581 TR Series fl ail mulcher grass defl ector (left) S8630020 TR Series fl ail mulcher dual wheels (in lieu of rear roller) S5816618 TR Series fl ail mulcher ‘Y’ blade (standard) S5536541 TR Series fl ail mulcher ‘Y’ blade bushing S5596542 TR Series fl ail mulcher ‘Y’ blade spacer S5716648 TR Series fl ail mulcher hammer (optional)

Farm Implements P/L reserves the right to change design, specifi cation and price without notice. Prices are recommended retail (RRP) only and DO NOT include freight. Freight terms are ex-works Dandenong, Victoria. Individual distributors prices may vary. 28

TZF Series (Front/Rear) Flail Mulcher

Mounting Measurements Model Centered Offset Max. Offset TZF 220 1220/1162mm 870/1512mm 350mm (14”) TZF 250 1220/1426mm 820/1826mm 400mm (16”) Measurements refer to distance left/right of centre

Suited Applications Heavy duty reversible (front/rear mounted)* machine with double 180° (540/1000) PTO and hydraulic side shift for tractors 60-90hp. Suitable for cutting grass and mulching large prunings due to a robust and compact design. Deck Material One piece 5mm, cold pressed formed and heavily reinforced Gearbox High speed (540/1000rpm) with L1000 drive shaft and double free wheel PTO Shaft Series 6 (64hp/48kw), triangular tube and safety covers Drive System Belt driven using ‘XPB’ belts 540 rpm 1000 rpm Finish Premium quality agricultural enamel Roller Full length roller with self lubricating bearings Linkage/Mounting Multiple position, hydraulic offset, category 2 Blades Smooth 150mm wide hammers 1971 rpm 2044 rpm (heavy duty carbon/chrome)

Overall Weight No. of Tractor RRP Code Description Width (kg) Blades (hp) (inc. GST) 2480 STZF220 Sicma TZF 220 - 2.2m (87”) Front/Rear FLAIL (57500) 840 18 / 54 60 - 90 98” 2740 STZF250 Sicma TZF 250 - 2.5m (98”) Front/Rear FLAIL (58000) 890 20 / 60 70 - 90 108”

S5716270 TZF Series self sharpening smooth hammer (standard) S5816274 SL/TUF/FB/TZF Series fl ail ‘Y’ blade (optional) S5536275 TUF/TZF Series ‘Y’ blade spacer * Machines come set up for 540rpm. Pulleys and belts must be changed for 1000rpm. Kits are supplied to run at 540/1000rpm.

Farm Implements P/L reserves the right to change design, specifi cation and price without notice. Prices are recommended retail (RRP) only and DO NOT include freight. Freight terms are ex-works Dandenong, Victoria. Individual distributors prices may vary. 29

BH Series Rotary Hoe (Formally SA-K)

Overview Light weight compact fi xed machine for compact tractors 15 - 30hp Deck Material One piece 4mm, cold pressed formed, 5mm side plates Gearbox L700 drive shaft in oil bath PTO Shaft Series 4 (35hp/26kw), triangular profi le tube, safety covers and 150mm (6”) slip clutch Drive System Side chain drive in oil bath Finish Premium quality agricultural enamel Skids Adjustable Linkage/Mounting Fixed, double clevis, category 1 Blades 6 per fl ange, curved carbon/chrome spring steel Working Depth 150mm (6”)

Overall Weight No. of No. of Tractor RRP Code Description Width (kg) Blades Flange (hp) (inc. GST) 1130 SBH100 Sicma BH 1000 - 1.0m (39”) Rotary Hoe (18100) 130 24 4 15 - 30 44” 1330 SBH120 Sicma BH 1200 - 1.2m (47”) Rotary Hoe (18120) 145 30 5 20 - 30 52”

S4811786 SA-K Series curved blade (left) S4811785 SA-K Series curved blade (right)

Farm Implements P/L reserves the right to change design, specifi cation and price without notice. Prices are recommended retail (RRP) only and DO NOT include freight. Freight terms are ex-works Dandenong, Victoria. Individual distributors prices may vary. 30

CS Series Rotary Hoe

Photographed with optional front defl ectors

Overview Medium to heavy fi fixed xed machine with skids and anti-clog anti-clog provisions for tractors 3030-50hp-5 Deck Material One piece 4mm, cold pressed formed, 6mm side plates Gearbox L750 drive shaft in oil bath PTO Shaft Series 5 (54hp/42kw), triangular profi le tube, safety covers and 180mm (7”) slip clutch Drive System Side chain drive in oil bath Finish Premium quality agricultural enamel Skids Adjustable Linkage/Mounting Fixed, double clevis, category 1 Blades 6 per fl ange, curved carbon/chrome spring steel Working Depth 180mm (7”)

Overall Weight No. of No. of Tractor RRP Code Description Width (kg) Blades Flange (hp) (inc. GST) 1480 SCS135 Sicma CS135 - 1.35m (53”) Rotary Hoe (19000) 238 42 7 30 - 50 58” 1580 SCS145 Sicma CS145 - 1.45m (57”) Rotary Hoe (19100) 246 42 7 35 - 50 62” 1780 SCS165 Sicma CS165 - 1.65m (65”) Rotary Hoe (19200) 266 48 8 40 - 50 70”

S4811401 CS Series curved blade (left) S4811400 CS Series curved blade (right)

Farm Implements P/L reserves the right to change design, specifi cation and price without notice. Prices are recommended retail (RRP) only and DO NOT include freight. Freight terms are ex-works Dandenong, Victoria. Individual distributors prices may vary. 31

RM Series Rotary Hoe (Formally SM-SMR)

OverviewOverview Medium,Medium, fi xedxed machinemachine wwithith sskidskids anandd antanti-clogi-clog pprovisionsrovisions DeckD k MaterialM t i l OneO piecei 44mm, coldld pressedd fformed,d lloadd bbearingi fframe, 88mm sideid platesl t PTO Shaft Series 5 (54hp/42kw), triangular profi le tube, safety covers and 180mm (7”) slip clutch Gearbox Single speed L800 drive shaft in oil bath Drive System Side gear drive in oil bath, fi xed to load bearing frame Finish Premium quality agricultural enamel Skids Adjustable Linkage/Mounting Fixed, double clevis, category 1 and 2 Blades 6 per fl ange, curved carbon/chrome spring steel Working Depth 200mm (8”)

Overall Weight No. of No. of Tractor RRP Code Description Width (kg) Blades Flange (hp) (inc. GST) 1710 SRM155 Sicma RM155 - 1.55m (61”) Rotary Hoe (25000) 420 36 6 40 - 70 67” 1960 SRM180 Sicma RM180 - 1.80m (71”) Rotary Hoe (26000) 460 42 7 45 - 70 77”

S4818223 Optional SM/SMR/RM Series curved blade (left) S4818222 Optional SM/SMR/RM Series curved blade (right) S4818225 Optional SM/SMR/RM Series square blade (left) S4818224 Optional SM/SMR/RM Series square blade (right)

Farm Implements P/L reserves the right to change design, specifi cation and price without notice. Prices are recommended retail (RRP) only and DO NOT include freight. Freight terms are ex-works Dandenong, Victoria. Individual distributors prices may vary. 32

SPR Seriess RotarRotaryy HoeHoe

Overview Heavy duty, fi xed machine for tractors 60–90hp with 4+2 speed ggearboxearbob x wiwithth 5540/100040/1000 PTPTOO Deck Material OneOne piecepiece 4mm4mm,, cold ppressedressed formed with load bearinbearingg frame and 88mmmm side pplateslates Gearbox 4+2 speed gearbox with L850 drive shaft in oil bath PTO Shaft Series 8 (96hp/71kw), triangular profi le tube with safety covers and 200mm (8”) 2 plate slip clutch Drive System Side gear drive in oil bath, fi xed to load bearing frame Finish Premium quality agricultural enamel Skids Adjustable Linkage/Mounting Fixed, centre mounted, double clevis, category 2 Blades 6 per fl ange, curved carbon/chrome spring steel Working Depth 200mm (8”) “Anti Pan” rotor

Overall Weight No. of No. of RRP Code Description Width (kg) Blades Flange (inc. GST) SSPR160 Sicma SPR160 - 1.6m (63”) Rotary Hoe (27500) 1710 (67”) 560 36 6 SSPR185 Sicma SPR185 - 1.85m (71”) Rotary Hoe (28000) 1960 (77”) 610 42 7 SSPR210 Sicma SPR210 - 2.1m (81”) Rotary Hoe (28500) 2210 (87”) 660 48 8 SSPR235 Sicma SPR235 - 2.35m (91”) Rotary Hoe (29000) 2510 (97”) 720 54 9 SSPR160-AP Sicma SPR160 ‘Anti Pan’ - 1.6m (63”) Rotary Hoe (27600) 1710 (67”) 575 36 9 SSPR185-AP Sicma SPR185 ‘Anti Pan’ - 1.85m (71”) Rotary Hoe (28100) 1960 (77”) 625 44 11 SSPR210-AP Sicma SPR210 ‘Anti Pan’ - 2.1m (81”) Rotary Hoe (28600) 2210 (87”) 680 52 13 SSPR235-AP Sicma SPR235 ‘Anti Pan’ - 2.35m (91”) Rotary Hoe (29100) 2510 (97”) 745 56 14

S8423080 Optional SPR Series depth wheel kit S4814519 Optional SPR Series curved blade (left) S4814518 Optional SPR Series curved blade (right) S4814517 Optional SPR Series square blade (left) S4814516 Optional SPR Series square blade (right) S4814515 Optional SPR ‘Anti Pan’ blade (left) S4814514 Optional SPR ‘Anti Pan’ blade (right) S4005116 Optional SPR ‘Spiked’ roller for SPR 185 (indent orders only) S4005117 Optional SPR ‘Spiked’ roller for SPR 210 (indent orders only) S4005118 Optional SPR ‘Spiked’ roller for SPR 235 (indent orders only) S8423095 Optional SPR ‘Packer’ roller for SPR 210 (indent orders only) S8423096 Optional SPR ‘Packer’ roller for SPR 235 (indent orders only)

Farm Implements P/L reserves the right to change design, specifi cation and price without notice. Prices are recommended retail (RRP) only and DO NOT include freight. Freight terms are ex-works Dandenong, Victoria. Individual distributors prices may vary. 33

RG Series Rotary Hoe

Overviewerview Heavy duty, duty fi fixed xed machine for tractors 90-160hp 90-160hp wiwithth 22+2+2 gear drive transmission Deck Material One piece 4mm, cold pressed formed load bearing frame, 8mm side plates Gearbox 2+2 speed adjustable multi speed gearbox PTO Shaft Series 8 (96hp/71kw), triangular profi le tube safety covers and 200mm (8”) 4 plate slip clutch Drive System Side gear drive in oil bath, fi xed to load bearing frame Finish Premium quality agricultural enamel Skids Adjustable Linkage/Mounting Fixed, centre mounted, double clevis, category 2 Blades 6 per fl ange, curved carbon/chrome spring steel ‘Anti Pan’ rotor Working Depth 200mm (8”)

Overall Weight No. of No. of RRP Code Description Width (kg) Blades Flange (inc. GST) 2770 SRG255 Sicma RG255 - 2.55m (100”) Rotary Hoe (30000) 970 60 10 109” 3270 SRG305 Sicma RG305 - 3.05m (120”) Rotary Hoe (30500) 1032 72 12 129” 2770 SRG255-AP Sicma RG255 ‘Anti Pan’- 2.55m (100”) Rotary Hoe (30100) 970 60 15 109” 3270 SRG305-AP Sicma RG305 ‘Anti Pan’- 3.05m (120”) Rotary Hoe (30600) 1032 72 18 129”

58005358 Optional RG Series deapth wheel kit S4814005 Optional RG Series curved blade (left) S4814004 Optional RG Series curved blade (right) S4814003 Optional RG Series square blade (left) S4814002 Optional RG Series square blade (right) S4814514 Optional ‘Anti Pan’ blade (left) S4814515 Optional ‘Anti Pan’ blade (right) S8004176 Optional ‘Spiked’ roller for RG 255 (indent orders only) S8004178 Optional ‘Spiked’ roller for RG 305 (indent orders only) S8004025 Optional ‘Packer’ roller for RG 255 (indent orders only) S8004027 Optional ‘Packer’ roller for RG 305 (indent orders only)

Caroni Implements reserves the right to change design, specifi cation and prices without notice Prices are Recommended Retail Only and do not include freight Freight Terms FOB Ex Works, Dandenong, Victoria Individual distributors prices may vary 34

3-PL Spinner Spreader

Stainless steel disk

Single side distributor

PL Series P Series Twin side distributor

Overview P series - single piece metal hopper with tube frame PL series - single piece heavy duty PVC hopper with tube frame Spinner Disc Stainless steel spinner plate with 6 fi ns Gearbox Single speed 540rpm 1:1 ratio PTO Shaft Series 2 (21hp/16kw), triangular profi le tube with safety covers Finish Premium quality agricultural enamel with epoxy varnish Linkage/Mounting Fixed category 1, bolt on pin P/PL Lime agitator Discharge Side drop onto spinner fi ns for even distribution Spreading Width Granular - 12 - 14m (39 - 46ft) Powder - 6 - 7m (20 - 23ft)

Capacity Height Weight RRP Code Description (lt) (kg) (mm) (kg) (inc. GST) CP300 Cosmo P300 Spinner Spreader (60000) 269 347 1050 58 CP500 Cosmo P500 Spinner Spreader (61000) 361 466 1130 63 CPL400 Cosmo PL 400 PVC Hopper Spinner Spreader (61400) 297 383 1070 60 CPL500 Cosmo PL 500 PVC Hopper Spinner Spreader (61500) 361 466 1130 63 CPSC500 Cosmo PS-C 500 PVC Hopper Spreader – Bottom Drop (61600) 386 495 1170 70

P619.001 P/PL Series lime agitator P620.002 P/PL Series single side distributor P620.043 P/PL Series twin side distributor P601.002 P/PL Series stainless steel veins (each) P605.005 P/PL Series stainless steel shutter lever (right) P605.006 P/PL Series stainless steel shutter lever (left) P902.002 Hopper cover (P/PL300) P902.003 Hopper cover (P/PL400/500)

Farm Implements P/L reserves the right to change design, specifi cation and price without notice. Prices are recommended retail (RRP) only and DO NOT include freight. Freight terms are ex-works Dandenong, Victoria. Individual distributors prices may vary. 35

Tow Type Spinner Spreaders

PTB560 Tow type PTP180 Tow type

Overview PTB - single piece, low profi le metal hopper with fl oatation tyres on a wide wheel base and a ‘dog-gear’ to engage/disengage spinner plate. PTP - heavy duty PVC hopper with tubular frame on fl oation tyres. Spinner Disc PTB - Anti-rust coated disc with 6 fi ns PTP - stainless steel spinner plate with 6 fi ns Gearbox single speed ground drive 1:1 ratio Axle PTB - 1830mm (72”) outside to outside PTP - 1050mm (41”) outside to outside Wheels PTB - 18” x 9.5” (460 X 240mm) fl oatation tyres PTP - 16” x 6” (400 x 150mm) fl oatation tyres Finish Premium quality agricultural enamel with epoxy varnish Discharge PTB - manual cable operation with bottom drop onto spinner fi ns Covers PTP - manual split levers with lateral drop onto spinner fi ns available for tow Spreading Width PTB 14 - 16m (46 - 52ft) @ 13km/h (8mph) type spreaders PTP 12 - 14m (39 - 46ft) @ 13km/h (8mph)

Capacity Height Weight RRP Code Description (lt) (kg) (mm) (kg) (inc. GST) CPTP18 Cosmo PTP180 Tow Type Spinner Spreader (60300) 165 213 1300 80 CPTP30 Cosmo PTP300 Tow Type Spinner Spreader (60350) 260 335 1440 84

CPTB43 Cosmo PTB430 Tow Type Spinner Spreader (60400) 320 400 1080 136 CPTB56 Cosmo PTB560 Tow Type Spinner Spreader (60500) 400 480 1300 139

P902.001 Hopper cover (PTP180) P902.002 Hopper cover (PTP300) PTB902.005 Hopper cover (PTB430) PTB902.004 Hopper cover (PTB560)

Farm Implements P/L reserves the right to change design, specifi cation and price without notice. Prices are recommended retail (RRP) only and DO NOT include freight. Freight terms are ex-works Dandenong, Victoria. Individual distributors prices may vary. 36

Twin Spin Super Spreaders RX - 24m Double Disc Spreader

Overview Twin spin machines with slow speed agitators, stainless steel components, hydraulic opening system and power take off (PTO) sshaft.haft. Hopper Heavy duty square/rectangular profi le hopper Gearbox Three (3) gearboxes Linkage/Mounting Fixed category 2 and 3 Finish Premium quality agricultural enamel with epoxy varnish Discharge Opening opened/closed hydraulically Spreading Width RE series. 12 - 18m (40 - 60ft) RX series. 12 - 24m (40 - 80ft) Spreading Angle 180° - 90°, left or right Spreading Discs Stainless steel with different length fi ns to ensure full even spread

Photographed with optional professional hopper cover

Farm Implements P/L reserves the right to change design, specifi cation and price without notice. Prices are recommended retail (RRP) only and DO NOT include freight. Freight terms are ex-works Dandenong, Victoria. Individual distributors prices may vary. 37

Twin Spin Super Spreaders RE -18m Double Disc Spreader

Twin discharge assembly

Dimensions Weight Capacity RRP Code Description Width Length Height (kg) (lt) (inc. GST)

CRE125 Cosmo RE1250 Twin Spin 18m Fertiliser Spreader 1500 1350 1240 198 1170

RE620.121 RE Twin discharge assembly RE902.018 RE Hopper cover

CRX110 Cosmo RX1100 Twin Spin 24m Fertiliser Spreader (70000) 1300 2300 1050 310 950

CRX160 Cosmo RX1600 Twin Spin 24m Fertiliser Spreader (70500) 1300 2300 1270 323 1375

CRX190 Cosmo RX1900 Twin Spin 24m Fertiliers Spreader (71000) 1300 2300 1370 350 1660

RX902.006 RX Professional hopper cover

Farm Implements P/L reserves the right to change design, specifi cation and price without notice. Prices are recommended retail (RRP) only and DO NOT include freight. Freight terms are ex-works Dandenong, Victoria. Individual distributors prices may vary. 38

Pendulum Super Spreader

Standard Adjustable Crown Optional hydraulic opening adjustment spreading width lime agitator opening system

Overview Strong reinforced frame, traditional fi breglass hopper and a gearbox with an adjustable spreading width. Hopper Heavy duty fi breglass Gearbox New generation fl ywheel (1:1 ratio) with a key adjustment Linkage/Mounting Fixed category 1 Finish Premium quality agricultural enamel with epoxy varnish Discharge Manual lever (hydraulic option available) 1 Spreading Width 0.75m - 15m (2 /2 - 50ft). Machine standard with 9-15m spout

Farm Implements P/L reserves the right to change design, specifi cation and price without notice. Prices are recommended retail (RRP) only and DO NOT include freight. Freight terms are ex-works Dandenong, Victoria. Individual distributors prices may vary. 39

Pendulum Super Spreader

Model PDHV-1250 Model PDV-500

Capacity Height Weight RRP Code Description (lt) (kg) (mm) (kg) (inc. GST) CPDV50 Cosmo PDV500 Pendulum Super Spreader (76000) 480 523 900 130 CPDV60 Cosmo PDV600 Pendulum Super Spreader (77000) 580 632 1000 142 CPDHV80 Cosmo PDHV800 Pendulum Super Spreader (78000) 850 926 970 170 CPDHV100 Cosmo PDHV1000 Pendulum Super Spreader (79000) 1050 1144 1070 180 CPDHV120 Cosmo PDHV1250 Pendulum Super Spreader (80000) 1250 1360 1200 195

CPDVPT Paddock trailer for PDV/PDHV spreader* (81000) PDV 810.001 Series 4 wide angle PTO shaft (trailer) PDV 619.026 PDV/PDHV crown lime agitator PDV 619.008 PDV hydraulic opening system PDV 619.009 PDHV hydraulic opening system PDV 902.011 Hopper cover (PDV model) PDV 902.012 Hopper cover (PDHV model) PDV 304.100 PDV/PDHV spout - standard (full coverage 9-15m) PDV 304.101 PDV/PDHV spout - narrow (full coverage 4-8m) PDV 304.102 PDV/PDHV stainless spout - vineyard no.2 (band spreading 0.74-4.5m) PDV 304.103 PDV/PDHV stainless spout - vineyard no.1 (full coverage 2-4m) PDV 304.105 PDV/PDHV stainless spout - orchard (band spreading 2-10m) PDV 304.107 PDV/PDHV stainless spout - right side full coverage (4-6m) PDV 304.108 PDV/PDHV stainless spout - left side full coverage (4-6m) PDV 304.109 PDV/PDHV spout end - band spreading (left or right) PT611111 PT Series crown lime agitator (PT models prior to 2008) PT304024 PT Series spout - standard full coverage (pt models prior to 2008) * May require longer wide angle PTO shaft.

Caroni Implements reserves the right to change design, specifi cation and prices without notice Prices are Recommended Retail Only and do not include freight Freight Terms FOB Ex Works, Dandenong, Victoria Individual distributors prices may vary 40

3-PL Cement Mixer

Overview Designed for concrete preparation, this robust mixer can also be used to mix a wide range of different materials. Hopper/Cone Large, open mouthed, 3mm rolled, seamless 320 litre, 440mm (17.5”) diameter Gearbox Chain transmission drive system (10:1 reduction) in a steel housing Linkage/Mounting Fixed, bolt on, category 1 Finish Premium quality agricultural enamel with epoxy varnish Discharge 18” x 1.5” hydraulic cylinder Width 860mm (34”) Length 930mm (36.5”) Height 950mm (37.5”) Rotation Min - 250rpm. Max. - 300rpm. Mixing Capacity 195 ltr = 0.2m3 = 7 ft3

Hyd. Pressure Weight RRP RRP Code Description min (atm) max (atm) (kg) (exc. GST) (inc. GST) 80600 Cosmo Mixer 80 - 320 Cement Mixer 50 140 100 $1,340.91

Farm Implements P/L reserves the right to change design, specifi cation and price without notice. Prices are recommended retail (RRP) only and DO NOT include freight. Freight terms are ex-works Dandenong, Victoria. Individual distributors prices may vary. 41

Finishing Mower

Suited Applications Any grassy areas such as paddocks, golf courses, parks, gardens, lawns, sports fi elds and road sides. Deck Material One piece 5mm, cold pressed formed and reinforced Gearbox High speed (540rpm) in oil bath PTO Shaft Series 4 (35hp/26kw), triangular profi le tube with safety covers Drive System Belt driven using two (2) ‘B’ type belts Finish Premium quality agricultural enamel Cutting Height Adjustable between 25 - 100mm (1”- 4”) Wheels Four (4), 360 degree spinning solid rubber wheels Linkage/Mounting Floating, bolt on category 1 pins Blades 6mm carbon/chrome spring steel Tractor Power 12 - 60hp 1.2m = 12hp+, 1.5m = 18hp+, 1.8m = 25hp+, 2.1m = 30hp+ Discharge Rear dishcarge only

Cutting Overall Weight No. of Tip Speed RRP Code Description Width Width (kg) Blades (ft/min) (inc. GST) 1200 1350 SFA120 Sicma FA1200 - 1.2m Finishing Mower (15000) 178 3 13709 48” 53” 1500 1625 SFA150 Sicma FA1500 - 1.5m Finishing Mower (15500) 196 3 14082 60” 64” 1800 1930 SFA180 Sicma FA1800 - 1.8m Finishing Mower (16000) 214 3 14185 72” 76” 2110 2235 SFA210 Sicma FA2100 - 2.1m Finishing Mower (16500) 370 3 15243 84” 88”

S5812701 FA 1200 - 1.2m Finishing mower blade (suit TC480) S5812702 FA 1500 - 1.5m Finishing mower blade (suit TC590/TC910) S5812703 FA 1800 - 1.8m Finishing mower blade (suit TC710) S5812707 FA 2100 - 2.1m Finishing mower blade

Farm Implements P/L reserves the right to change design, specifi cation and price without notice. Prices are recommended retail (RRP) only and DO NOT include freight. Freight terms are ex-works Dandenong, Victoria. Individual distributors prices may vary. www.farmimplements.com.au T: (03) 9706 5166 F: (03) 9706 5050