Trinitron" Color TV

Operating Instructions

KV-27S22 KV-27V22 KV-29PS2 KV-29RS22 KV-29RS22C KV-29SD2 KV-29V22M KV-32S22

© 1997 by SonyCorporation NARNING CAUTION "o prevent fire or shock hazard, do not expose the TV When using TV games, computers, and similar products interference in a residential installation. This o rain or moisture,' with your TV, keep the brightness and contrast equipment generates, uses, and can radiate radio functions at low settings. If a fixed (non-moving) frequency energy and, if not installed and used in pattern is left on the screen for long periods of time at accordance with the instructions, may cause harmful a high brightness or contrast setting, the image ran be interference with radio communications. However, permanently imprinted onto the screen. Continuously there is no guarantee that interference will not occur watching the same program can cause the imprint of in a particular installation. If this equipment does station Iogos onto the TV screen. These types of cause harmful interference to radio or television imprints are not covered by your warranty because reception, which can be determined by turning the ATTENTION they are the result of misuse. equipment off and on, the user is encouraged to try to

RISQUE DE CHOC ELECTRIQUE, correct the interference by one or more of the NE PAS OUVRIR Note on Caption Vision following measures: PRECAUCION This television receiver provides display of televbion • Reorient or relocate the receiving antennas. dosed captioning in accordance with §15.119 of the • Increase the separation between the equipment end RIESGO DE CHOQUE ELECTRICO FCC rules. receiver. NO ABRIFI • Connect the equipment into an outlet on a circuit Note on cleaning the TV different from that to which the receiver is connected. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, Clean the TV with a soft dry cloth. Never use strong solvents such as thinner or benzine, which might • Consult the dealer or an experienced radio/TV DO NOT REMOVE COVER (OR BACK). damage the finish of the cabinet. technician for help. NO USER-SERVICEABLE PARTS INSIDE.

REFERSERVICING TO QUALIFIED SERVICE PERSONNEL. Note to CATV system installer modifications not expressly approved in this This reminder is provided to call the CATV system I Youmanualare couldcautionedvoid thatyour anyauthoritychangesto oroperate this I installer's attention to Artide 820-40 of the NEC that equipment. I This symbol is intended to alert the user to provides guidelines for proper grounding and, In the presence of untnsulated "dangerous particular, specifies that the cable ground shall be This document is for the remote control RM-Y13SA. voltage" within the product's enclosure that connected to the grounding system of the building, as MODELS: KV-27S22, 27V22, 29PS2, 29RS22, 29RS22C, may be of sufficient magnitude to constitute close to the point of cable entry as practical. 2951)2, 29V22M, 32S22 a risk of electric shock to persons. Use of this television receiver for other than private This symbol is intended to alert the user to viewing of programs broadcast on UHF or VHF or the presence of important operating and transmitted by cable companies for the use of the maintenance (servicing) instructions in the general public may require authorization from the literature accompanying the appliance. broedcaster/cable company and/or program owner.

CAUTION NOTIFICATION

TOPREVENTELECTRICSHOCK,DO NOT USETHIS This equipment has been tested and found to comply POLARIZEDAC PLUGWITH AN EXTENSIONCORD, with the limits for a Class B digital device pursuant to RECEFTACLE,OR OTHER OUTLETUNLESSTHE BLADESCAN Part 15 of the FCCRules. These limits are designed to BEFULLYINSERTEDTO PREVENTBLADEEXPOSURE. provide reasonable protection against harmful Jr Remote Control

In the instructions that follow, we will refer MUTING Getting to know the buttons on the to the buttons on your remote control. remote control Keep this flap unfolded and look to this page TV (POWER) for reference. Names of the buttons on the remote control are TV (FUNCTION) presented in different colors to represent the o @eo available functions. ® ®-L® DISPLAY TV/VIDEO Button color SLEEP ANT (page 11) Transparent ...... Press to select the component you want to control; e.g. 0 - 9 buttons VTR (VCR), DBS (Direct Broadcast Satellite)/CABLE, or "IV. JUMP ENTER Green ...... Buttons relevant to power (_ TV/DBS MTS (page 14)/GUIDE operations, like turning the (page 5) Select buttons TV, DBS (Direct Broadcast SateUite)/CABLE, or VTR (page 12) RESET (VCR) on or off. MENU (page 13 and 14) Label color VOL +/- CH +/- White ...... TV/VTR (VCR)/DBS (Direct Broadcast Satellite)/CABLE CODE SET operation buttons. Blue ...... DBS (Direct Broadcast (page 18 and 20) Satellite) operation buttons.

For a detailed explanation of most buttons, see "Watching the TV" on page 10. mm w Table of Contents

Welcome! ...... 1 Basic Set Up Troubleshooting ...... 21 Precautions ...... 1 InseKmgbatteries...... 8 Specifications ...... 23 Using This Manual ...... 1 Using the remotecontrol Select buttons ...... 8 Index ...... 24 Adjus_ng sliders ...... 8 Connecting and Installing the TV On LineHelp/Instructions ...... 8 Connector Types ...... 2 Making Connections ...... 2 Using your New TV Owner's Record Connecting directly to cable Settingup the'IV automatically...... 9 The model and serial numbers are Io¢ated at the rear or an antenna ...... 2 of the W, below the Sony logo, on the stkker, end Watchingthe"IV...... 10 also on the TV box (white label). Record the_ numbers Cable or antenna ...... 2 in the spaces provided below. Refer to them whenever Connecting a cable box ...... 2 you call upon your Sony dealer regarding this product. Adjusting your SET UP (menus) Connsctingan antenna/cableTVsystem Model No. KV" withaVCR ...... 3 Learning menu selection ...... 12 Connect_toans Videoequipped Using the VIDEO menu ...... 13 serial No. VCR ...... 3 Using the AUDIO menu ...... 14 Connecting a VCR and "IV with a cable Using the TIMER menu ...... 15 bOX .,,,,.,....,,,,,,....,,..,...... ,...... °°°.°..°.°°°°°4 ConnectingtoanSVideoeqm'ppedVCR Using the SET UP menu ...... 16 with a cable box ...... 4 Connecting a DBS receiver ...... 5 Operating video equipment Conneding a DBS receiver and a VCR .... 5 Settingthemanufacturer'scode...... 18 Connscfi_ an a_M.iosystem ...... 6 Connecting a camcorder ...... 6 Operating a cable box or DB$ receiver two vcP,sfortape_iiting using MONITOR our ...... 7 ProgrammL_theremote...... 20 E Welcome! E Precautions Jig E Using This Manual

Thank you for purchasing the Sony Trinitron ® Safety This manual is divided into four major Color TV. This manual is written for the models * Operate the TV only on 120 V AC sections. We recommend that you carefully 'listed below. Before reading, check the model review the contents of each section in the (except KV-29RS22C). "humber on the rear of your TV. order provided to ensure that you fully . Operate the TV only on 220 V AC understand the operation of your new TV. Model KV-27S22 is used for illustration purposes. (KV-29RS22C only). The screens displayed are for model KV-29V22M. 1 Connecting and Installing the W. * The plug is designed, for safety purposes, Differences in operation features areindicated in This section will guide you through your to fit in the wall outlet only one way. If you the text; for example, "KV-27S22 only". initial set up. It will show you how to are unable to insert the plug fully into the outlet, contact your dealer connect your new components, connect to (except KV-29RS22C). your antenna or cable, and connect any Model accessories. Number • If any liquid or solid object should fall inside the cabinet, unplug the TV immediately and 2 Basic Set Up. KV-27S22 have it checked by qualified personnel before This section will teach you the basic skills operating it further. needed to operate your new TV. It will k'V-29PS2 • If you will not be using the TV for several show you how to operate special functions of the remote control. KV-29RS22C days, disconnect power by pulling the plug itself. Never pull on the cord. 3 Using your New W. k'V-29V22M For details concerning safety precautions, see the This section will show you how to begin supplied leaflet "IMPORTANT SAFEGUARDS". using your new TV. It will show you how to use the AUTO SET UP feature, and how Installing to use your remote control's features. • To prevent internal heat build-up, do not 4 Adjusting your Set Up (menus). block the ventilation openings. This section will teach you how to access • Do not install the TV in a hot or humid on-screen menus and adjust your TV's place, or in a place subject to excessive dust settings. or mechanical vibration. Instructions in this manual are written for the remote wntrol. Similar controls may befound on the TV console. __ II Connecting and Installing the TV

Connecting directly to cable or an Cable or antenna Connector Types antenna This is the most simple connection. Connection You may find it necessary to use some of the The connection you choose will depend on is made directly from the cable or antenna to following connector types during set up. the cable found in your home. Newer homes the TV. Coaxial Cable will be equipped with standard coaxial cable (Rear of TV) VHF/UHF Cable Standard TV Cable and Antenna connector (see A); older homes will probably have 300- ohm twin lead cable (see B); still other homes Plug Type may contain both (see C). _ (_ Press onto connection Connecting a cable box A Screw-onType Some pay cable TV systems use scrambled or • VHF only 75-ohm (Rear of TV) -'_ CI_ Screwontoconnection or coaxial cable VHF/UHF encoded signals that require a cable box* to • VHF/UHF view all channels. S Video Cable or High quality Video connector for enhanced picture quality i Cable Cable _ (Rear of TV) VHF/UHF -.__) Alignguidesand B 300-ohm twin (Rear of TV) ox pressontoconnection VHF only lead cable VHF/UHF _ ' Audio/Video Cable • UHForonly ,N OUT Conventional Audio/Video cable or • VHF/UHF Antenna connector _ * Your Sony remote control can be programmed _ _ Press onto connection to operate your cable box (see page 18). Yellow - Video C 7S-ohm coaxial cable Note: White - Audio (Left) VHF Red - Audio (Right) -'---'JJ)-)_= "% (Rear of TV) • If you will be controlling all channel selections _,. through your cable box, you should consider , Making Connections using the CHANNEL FIX featurediscussed on _ EAC-66 U/V mixer page 16. For best picture quality, a cable TV system or (not supplied) outdoor antenna is recommended. • UHF I 300-ohm twin lead cable Disconnect all power sources before making any connections. Connecting an antenna/cable TV (Rear of TV)

1 Attach the coaxial connector from your Coaxial cable _o_ _ao0_ cable or antenna to IN on your VCR. 3 2 Using AUDIO/VIDEO connectors, VCR connect AUDIO and VIDEO OUT on your Ca ble II[_1out u_oR,ax0__o I VCR to AUDIO and VIDEO IN on your TV 1 '__-_ - _ _.._ ._ I " --_-_" AUDIO-L (white) AUDIO Right).* VIDEO (yellow) 3 Using(Yellow-VIDEO,a coaxial connector,White-AUDIOconnectLeft,OUTRed-on _ _ AUDIO-R (red) f your VCR to VHF/UHF on your TV. 2 VMC-810S/820S (not supplied) Connecting to an S Video equipped VCR (for optimum picture quality) • KV-27V22, 29V22M, 32S22 only

1 Attach the coaxial connector from your (Rear of TV) cable or antenna to IN on your VCR. 2 Using AUDIO connectors, connect AUDIO OUT on your VCR to AUDIO IN on your TV (White-AUDIO Left, Red-AUDIO Right).* 3 Coaxial cable 3 Using a coaxial connector, connect OUT on your VCR to VHF/UHF on your TV. Cable /_]o_ _0._0L_o 4 Using an S VIDEO connector, connect VHF/U_ S VIDEO on your VCR to S VIDEO on 1_- _._@ "(_° I yourTV. AUDIO-R (red) AUDIO-L (white) * Ifyou are connecting a monaural VCR, connect only 4 (not supplied) the single audio output to the left input on your TV. _/_ _ YC-15V/30V1 S VIDEO Note on DVD Connection: f * For the best picture quality: connect the DVD player directly to the TV. 2 RK-74A (not supplied) Keter to your DVD manual for detailed connection information. 3 _m i__' Connecting and Installing the TV (continued) Disconnect all power sources before making any connections. Connecting a VCR and TV with a (Rear of TV) cable box Connect the single (input) jack of the Splitter to Coaxial cable your incoming cable connection, and connect the other two (output) jacks (using coaxial cable) to VCR IN on your cable box and VHF/UHF on your TV. 2 Using a coaxial connector, connect OUT on AUDIO-L (white) your cable box to IN on your VCR. ] OD,O-RCred)VIDEO (yellow) 3 Using AUDIO/VIDEOconnectors, connect 1 AUDIO and VIDEO OUT on your VCR to Cable ! AUDIO and VIDEO IN on your TV (Yellow- .I "o_ VMC-810S/820S (not supplied) VIDEO, White-AUDIO Left, Red-AUDIO Right). Splitter Cable box (not supplied) (Rear of TV) Connecting to an S Video equipped VCR with a cable box Coaxial cable (for optimum picture quality) I

• KV-27V22, 29V22M, 32S22 only VCR 1-2 Perform as described above. I'_OUT _UOlO R _01OL VlO_ 3 Using AUDIO connectors, connect AUDIO S VIDEO OUT on your VCR to AUDIO IN on your TV AUDIO-R (red) AUDIO-L (white) (White-AUDIO Left, Red-AUDIO Right). 4 YC-15V/30V(not supplied) 4 Using an S Video connector, connect S VIDEO ! Cable 1 4J 2 _ _ on your VCR to S VIDEO on your TV. f RK-74A (not supplied) Note: Splitter Cable box • To view s_ambled channels through your cable box, select (not supplied) VIDFO 1 by pressing TV/VIDI_O on the remote control. 4 Disconnect all power sources before making any connections. Connecting a DBS (Direct Broadcast Satellite) receiver Forthehighestpicturequality,useS VIDEOinsteadof the I 2 I yeIIow AUDtO/VIDEO cable. (KV- 27V22, 29V22M, 32S22 I | (Rear of TV) .,_1 Connect the cable from your satellite antenna to your DBS receiver. on_) See your DBS manual for more informatlon. I I Iv,.,. VIDEO IN 2 Attach the coaxial connector from your cable or antenna to VHF/UHF on your TV.

R 3 Using AUDIO/VIDEO connectors, connect Satellite I _ L_I / AUDIO and VIDEO OUT on your DBS receiver antenna [u__ ] / cable to AUDIO and VIDEO IN on your TV. VIDEO (yellow) _ AUDIO-R (red) 3_ AUDIO-L (white) Connecting a DBS (Direct Broadcast f Satellite) receiver and a VCR VMC-810S/820S (not supplied) 1 Connect the cable from your satellite antenna to your DBS receiver. 2 Attach the coaxial connector from your cable (not supplied) or antenna to VHF/UHF-IN on your VCR. 3 Using a coaxial connector, connect VHF/UHF- (Rear of TV) OUT on your VCR to VHF/UHF on your TV. 4 Using AUDIO/VIDEO connectors, connect AUDIO and VIDEO OUT on your DBS receiver LV_O I _1 (V.,U',,'_OI. to AUDIO and VIDEO IN on your VCR. N_r° 5 Using AUDIO/VIDEO connectors, connect oBsr--I ! AUDIO and VIDEO OUT on your VCR to AUDIO and VIDEO IN on your TV. AUDIO-L (white) _ 3 AUDIO-R (red) Note: VIDEO (yellow) • To view input from the DBS or VCR, select VIDEO 1 5 1 by pressing TV/VIDEO on the remote control. VMC-810S/820S (not supplied) 5 Connecting and Installing the TV (continued)

Connecting an audio system Disconnect all power sources before making any connections. (Rear of TV) For greater viewing pleasure, integrate your VHF/UHF Vl0EO IN 1 home stereo into the system. RK-74A AUDIO-L (white) | Using AUDIO connectors, connect AUDIO (not supplied) 1 OUT on your TV to one of the unused Line inputs (e.g. Tape-2, etc.) on your stereo AUDIO-R (red) (White-AUDIO Left, Red-AUDIO Right). Line _ _ 2 Set your stereo to the chosen Line input and refer to page 14 of this manual for 2 /1: o[11 1 additional audio setup instructions.

Connecting a camcorder

• KV-27V22, 29V22M only

This connection is convenient for viewing a U U , If you have an S video equipped camcorder, you vlmEO 2 INPUT picture directly from your camcorder. w_oN can use an S video connection for optimum Using AUDIO/VIDEO connectors, connect picture quality. (KV-27V22, 29V22M only) m AUDIO and VIDEO OUT on your camcorder to AUDIO and VIDEO IN on the front panel VIDEO (yellow) (red) of your TV (Yellow-VIDEO, White-AUDIO (white) Left, Red-AUDIO Right). AV output VMC-810S/820S Note:

* If you are connecting a monoaural camcorder, (not supplied) connect only the single audio output to the left input on your TV. R Disconnect all power sources before making any connections. Connecting two VCRs for tape °editing using MONITOR OUT (Rear of TV) "_ KV-27V22, 29V22M only MONITOR OUT gives you the ability to use a second VCR to record a program being played by the primary VCR or to perform tape editing and dubbing.

1 Connect the VCR intended for playback VCR (fo_ Pl0ayback!___ _oVCRL(for recordinq) using the setup instructions on page 3 of this manual. 2 Using AUDIO/VIDEO connectors, AUDIO-/(white) connect AUDIO and VIDEO IN on your 1 _ _/_ _/_ 2 _V,DEO(ye,ow)AUDIO-R (red) VCR intended for recording to MONITOR i l AUDIO and VIDEO OUT on your TV. VMC-810S/820S (not supplied) VMC-810S/820S (not supplied)

Notes: • Do not change the input signal while editing through MONITOR OUT. • When connecting a single VCR to the TV; if VCR LINE OUT is connected to TV VIDEO IN, do not connect the TV MONITOR OUT Indicates direction jacks to the VCR LINE INPUT (see right). of signal Doing so will cause program interference and other viewing problems. _J_ _ Basic Set up

Inserting batteries Using the remote control On Line Help/Instructions Select buttons Insert two size AA (R6) batteries (supplied) by Several menu windows will provide prompts matching the + and - on the batteries to the and instructions to assist you in navigating diagram inside the battery compartment. through the different functions. When presented, use these to supplement the instructions in this manual.

VOL CH

Select

Notes: The supplied remote control has select • Remove the batteries to avoid damage buttons which allow for movement of the on- from possible battery leakage whenever screen selector in four directions. Pressing on you anticipate that the remote control will the edge of the select buttons will cause the not be used for an extended period. selector to move in the selected direction. • Handle the remote control with care. Pressing the center of the select buttons "GD" Avoid dropping it, getting it wet, or will activate the selected item. placing it in direct sunlight, near a heater, or where the humidity is high. Adjusting sliders • Your remote control can be programmed to operate most video equipment. See page 18. When menu items present a slider ( _ or _), use the select buttons (€ or _) to adjust the setting. Jr Using your New TV

Using the buttons on the front of the TV: Setting up the TV - VOLUME+

NT UP TV/VllOEO -VOLUME÷ - CHAM_L ,t POWER #utomatically AUTO PROGRAM The EASY SETUP GUIDE feature will allow you to set the on-screen language and set all receivable 1 Press POWER to turn on the "IV. channels. The EASY SETUP GUIDE screen The EASY SETUP GUIDE screen appears. appear every time you turn on the TV until you "AUTO PROGRAM" appears and the TV AUTO perform PROGRAM. starts scanning and presetting channels The EASY SETUP GUIDE feature does not apply POWER automatically.Whenallthereceivablechannels E.aL,S.ESPA_IOL: for installations that use a cable box for all channel are stored, the lowest numbered channel is AUTO SET UP : [VOL-] selection. DEMO : [TVNIDEO] displayed. If the TV receives cable TV channels, First please connect CABLE is set to ON automatically. To set up the TV manually, refer to "Using the the antenna. Press [SETUP]to exit. SET UP menu" on page 16. To perform AUTO SET UP again • Press SET UP. Tips "_ 2 (Except Canadian models) • Performthisfunction during theday, with theantenna Press CHANNEL + to select English • Press CHANNEL + orCHANNEL- toselecta and/or cableproperlyamra_Ced,to ¢asure that all available language. dumnels arebroadcastingand razivable. screens or CHANNEL - to select Spanish screens. • Press Volume - to restore factory settings • After using EASY SETUP GUIDE you will still have the ("CONTINUE TO AUTO PROGRAM?" option ofadjusting any ofthe system settings, likeerasing - CHANNEL + will appear on the screen. Press CH+ to channels, through the SET UP menu (page16). execute or CH- to exit). • TheTVmustbesettoTVinputtoexecuteAUTO • Press SET UP to exit. PROGRAM.PressANT untilthechannelnumberappa_. Note: • When you perform AUTO PROGRAM, 3 Press VOLUME - to continue or TV/VIDEO your CHANNEL FIX, TIMER, and for a DEMO of functions and menus. CHANNEL BLOCK settings will be erased. lil Using your New TV (continued)

Watching the TV REFERTO THE All of the TV features can be accessed via the ILLUSTRATION OF THE remote control. The following chart will REMOTE CONTROL ON THE explain the function of the buttons found on INSIDE FRONT COVER OF your remote control. THIS MANUAL AS YOU REVIEW THIS CHART

TV (FUNCTION) Activates the remote control for use with the TV.

TV POWER Turns the TV on and off. If "VIDEO" appears on the screen, press TV/VIDEO or ANT so that a channel number appears.

@. @ Use fordirect channel selection. Press 0-9 to select a channel (for example, to select channel 10, press 1 and 0), the channel will change after 2 seconds, or youcan press ENTER for immediate selection.

CH +/- Press to scan through the channels (+ up or - down).

VOL +/- Press to adjust the volume (+ up or - down).

JUMP Press to alternate orjump back and forth between two channels. You can onlyjump between the last two channels that have been selected with the 0-9 keys.

MUTING Press to mute the sound ("MUTING" will appear on the screen). Press again or press VOL + to restore sound.

SLEEP Press repeatedly untilthe TV displaysthe approximate time in minutes (30, 60, or 90) that you want the TV to remain on before shutting off automatically. Cancel by pressing until "SLEEP OFF" appears.

10 DISPLAY Press repeatedly to step through available displays: CAPTION Status VISION TEXT 1 Channel number, current time, channel caption (if set), and MTS mode (if TEXT 2 TEXT3 SAP is selected) are displayed. SAP indication disappears after three TEXT4 _MENU seconds. UselIB(_D Exit XDS XDS (Extended Data Service) shows a network name, program name, Some programs are broadcast with Caption program type, program length, call letters, and time of the show if the Vision. To display Caption Vision, select either broadcaster offers this service. CC1, CC2, CC3, CC4, TEXT1, TEXT2, TEXT3, Caption Vision or TEXT4 from the menu, then press DISPLAY Caption Vision will be displayed on the screen if the broadcaster offers this untilCaption Vision is displayed. service. (see right) To cancel the display, press DISPLAY repeatedly until =DISPLAY OFF" CC1, CC2, CC3, or CC4 shows you a caption, appears. =DISPLAY OFF" disappears after three seconds. that is, a printed version of the dialogue or sound effects of a program. (The mode should TV/VlDEO Press repeatedly to step through available video inputs: be set to CC1 for most programs) TEXT1, TV and Video 1 (KV-27S22, 29PS2, 29RS22, 29RS22C, 29SD2, 32S22 TEXT2, TEXT3, or TEXT4 shows you text, that only) is, information presented using either half or the TV, Video I and Video 2 (KV-27V22, 29V22M only) whole screen. It is not usually related to the program. ANT Press to change the inputfrom VIDEO to regular (ANT) mode. Notes: MTS/GUIDE Press this buttonto cycle throughthe Multi-channelTV Sound (MTS) options. • Poor reception of TV programs can cause (page 14) errors in Caption Vision and XDS. Captions may appear with a white box or other errors instead of intended text. • XDS, Caption Vision, and the status display cannot be used at the same time.

11 Adjusting your SET UP (menus)

3 Press the select buttons (# or #) to select 5 Learning menu selection Make your selection by pressing • or $, and the desired option. press (_ to activate it. Use the MENU button to access a menu and The previous screen will reappear. use the Select buttons to alter settings. Use the ,CHANNEL SET UP following example to learn how to modify SETCHANNELUP BLOCK CHANNELSET UP FAVORITE CHANNEL settings. VIDEO LABEL LANGUAGE: ENGLISH CABLE:ON _MENU CHANNELFIX: OFF 1 Press the MENU button. AUTO PROGRAM CHANNELERASE/ADD CHANNELCAPTION The main menu appears. :)MENU Use m [t) Exit

MENU usem(33 SxRam

PICTURE 4 Press C_. (_ MODEHUE : STANDARD COLOR BRIGHTNESS Options for your selection will be When you are done with changes to the SHARPNESS LIGHTSENSOR:ON displayed. selected menu, choose MENU to return to the :)MENU main menu. Once you have completed all CHANNEL SET UP menu corrections, press MENU on the remote control to exit the menu screens. I, CABLE: OFF CHANNEL FIX: OFF AUTO PROGRAM 2 Press the select buttons (# or #) to CHANNEL ERASE/ADD SET UP CHANNEL CAPTION _CHANNEL SET UP highlight the desired menu and press ;DMENU CHANNEL BLOCK FAVORITE CHANNEL to activate it. VIDEO LABEL UseI_BI-4q Ex_l_l LANGUAGE: ENGLISH DMENU SET UP SET UP CHANNEL BLOCK FAVORITE CHANNEL useBB_ F.x,_ VIDEO LABEL LANGUAGE: ENGLISH :)MENU Note: • Pressing MENU on the remote control will Use _ _ Exit allow you to exit from the metals.

12 Using the VIDEO menu MODE STANDARD: Select to display a standard picture.

VIDEO Customized picture MOVIE: Select to display a finely detailed picture. MODE :STANDARD viewing SPORTS: Select to display a vivid, bright picture. PICTURE HUE COLOR ; Sliders BRIGHTNESSI PICTURE Adjust slider left (cursor down) to decrease picture contrast and soften the color. SHARPNESS LIGHTSENSOR: ON PictureAdjustment Adjust sliderright(cursorup)to increasepicturecontrastand create morevividcolor. DMENU HUE Adjust slider left (cursor down) to decrease the green tones. PictureAdjustment Adjust slider right(cursorup)to increase the green tones.

For detailed information on using the remote COLOR Adjust slider left (cursor down) to decrease color intensity, to modify menu settings, refer to "Learning PictureAdjustment Adjust slider right(cursorup)to increase color intensity, menu selection" on page 12. BRIGHTNESS Adjust slider left (cursor down) to darken the picture. To select the VIDEO _ menu: PictureAdjustment Adjust slider right(cursorup)to brighten the picture.

Display =_ Highlight {_} m=l), Select SHARPNESS Adjust slider left (cursor down) to soften the picture. PictureAdjustment Adjust slider right(cursorup)to sharpen the picture.

LIGHTSENSOR (KV-27V22, 29V22M only) PictureAdjustment ON: TV automatically adjusts the brightness of the picture according to the brightness of the room. OFF: Brightness remains at preset value. ro restore the factory settings Press RESET on the remote control while the VIDEO menu is displayed.

13 Adjusting your SET UP (menus) (continued)

.P Using the AUDIO menu TREBLE Adjust sliderleft (cursor down) to decrease high pitched sounds. Sound Adjustment Adjust slider right (cursorup) to increase high pitched sounds.

BASS Sliders BASS Adjust slider left (cursordown) to decrease low pitched sounds. BALANCE ,,m...b..,.,= EFFECT : SRS Sound Adjustment Adjust slider right (cursor up) to increase low pitched sounds. MTS : STEREO SPEAKER :OFF AUDIO OUT :VARIABLE BALANCE Adjust slider left (cursordown) to emphasize left speaker volume. DMENU Sound Adjustment Adjust slider right (cursor up) to emphasize right speaker volume. Use []]_] _ Exit EFFECT SURROUND: Simulates theater quality sound (only effective for stereo programs). Customize sound (KV-27S22, 29PS2, 29RS22, 29RS22C, 29SD2, 32S22 only) For detailed information on using the remote effect based on the SRS: Produces a dynamic three dimensional sound for stereo or encoded audio to modify menu settings, refer to "Learning program's audio type. signals. (KV-27V22,29V22M only) menu selection" on page 12. SIMULATED: Addsa surround-likeeffectto mono programs.(KV-27V22,29V22M only)

To select the AUDIO .P menu: MTS STEREO: Select forstereoreception when viewinga program broadcastinstereo. Enjoy stereo, SAP: Select to listen to bilingual broadcast. (non-SAP programs will be muted Display =rob Highlight ir _ arab Select bilingual and mono when this feature is selected)

MENU programs. MONO: Select for mono reception. (use to reduce noise during stereo broadcasts) Quick MTS access: Press MTS onyour remote to cycle through the MTS options as follows:(STEREO ,_ SAP ,_ MONO ,_ STEREO) 5 SPEAKER ON: Select to listento the sound fromthe TV speakersand a separatestereosystem. Custom selection of OFF: Select to turn off the TV speakers and listen to the TV's sound only through To restore the factory settings audio output source. external audio system speakers. Press RESET on the remote control while the AUDIO OUT AUDIO OUT can only be set when speakers are set to OFF. AUDIO menu is displayed. Easy control of VARIABLE: Sound output varies according to the TV settings. Volume, Bass, volume adjustments. Treble, and Balance are adjusted through the TV. Useful when you want to use Tip "_" your remote to control the output of a separate audio system. RXED: Sound output is held at a fixed level. Volume, Bass, Treble, arid Balance are Press (_ for direct selection of an EFPECT setting. fixed to the factory settings.Volume adjustments are made throughyour stereo. Using the TIMER menu DAYLIGHT Spring: Select YES to compensate for Daylight Saving Time. SAVING The current time automatically moves ahead one hour. TIMER "_AVING:YES Automaticallyadjusts Fall: Select NO at the end of Daylight Saving Time. CURRENT TIME SET ON/OFF TIMER thetime. The current time moves back one hour." _MENU

CURRENT TIME SET CURRENT CURRENT TIME SET window will appear. I, ___ - -:- - AM TIME SET 1 Press • or _, on the select buttons untilthe current day _DMENU Necessaryforthe (MON-SUN) is displayed. Press _ to select. TIMER. 2 Press • or • on the select buttons untilthe current

hour (01-12) and AM/PM is displayed. Press (_ to Use _ _ Exit I_ _After setting the clock you can use the timer to select. turn the "IV on and off. 3 Press • or • on the select buttons untilthe current ! Tor detailed information on using the remote minute (00-59) is displayed. ito modify menu settings, refer to "Learning 4 Press _. menu selection" on page 12. The Clock has now started. Press MENU to exit.

ON/OFF TIMER ON/OFF TIMER ON/OFF TIMER window will appear. To select the TIMER (_ menu: IP.... --:-- AM_h CH .... Wake up or 1 Press • or # on the select buttons untilthe desired day Display _ Highlight (_ mBik Select scheduled viewing. (MON-SUN) or range of days (EVERY SUN-SAT or _MENU EVERY MON-FRI) is displayed. Press (_ to select. SUN 12:00 AM 2 Indicate the time (hours then minutes) that you want use_ (_ Exit _u the TV to turn on by pressing • or • and then (_). 3 Set the time duration (maximum of 6 hours) by pressing • or ,_ and then G_). TO CANCEL THE TIMER FUNCTION, PRESS RESET. 4 Press • or _, on the select buttonsto select the desired Set daylight saving time before setting the clock. Any channel. Press _ to select. loss of power will cause these settings to be erased. The timeris nowset. The TIMER indicatoron yourTV willbe lit.PressMENU to exit. When you performAUTO PROGRAM, allTIMER settingswillbe erased.

15 iil Adjusting your SET UP (menus) (continued)

CHANNEL SET UP Using the SET UP menu CHANNEL With the CHANNEL SET UP window open: 1, CABLE: OFF BET UP 1 Use • or • to select the feature you want to change. CHANNEL RX: OFF SET UP UP Basicsetup options 2 Press _ to access the feature. CHANNEL BLOCK _MENU FAVORITE CHANNEL forviewing CABLE: Select ON if your TV is connected to a cable VIDEO LABEL use_13_ Ex_ LANGUAGE: ENGLISH system. (AUTO SET UP will set CABLE to ON i ;)MENU automatically when it programs the TV) CHANNEL RX: Press _ and then use the • and t buttons to setihe TV's input to oneof the following op'dons: 2-6:Whenthe cableboxisconnectedtothe VHFMHF input.PressDBS/CABLE (FUNCTION)andthenCH+/- tochangechannels. For detailed information on using the remote VIDEO 1: When you have connected video equipment (e.g. A/V receiver) and you to modify menu settings, refer to "Learning want the TV inputfixed to it. You will be able to alternate between video sources. menu selection" on page 12. OFF: When you want to switchCHANNEL FIX off. To select the SET UP _ menu: TIMER and CHANNEL BLOCK settings willbe erased when CHANNEL FIX is set. AUTO PROGRAM: Instructsthe TV to automaticallyprogramall receivablechannels. Display Highlight I_ i=lb Select CHANNEL ERASE/ADD: With the CHANNEL ERASE/ADD window open: CHANNEL ERASE/ADO MENU 33 1 Place the cursor next to ERASE or ADD. ADD _MENU 2 Select the desired channel using CH+/-, or by selecting IL_lO--O_ 10'I++'I I0 IMllld.l_ d_WWl with the 0-9 buttons and pressing ENTER. 3 Press _ to activate. CHANNEL CAPTION: With the CHANNEL CAPTION window open: If any menu items are "grayed out", press the I CHANNEL CAPTION 1 Press _ and then • or t on the select buttons to k ---1 ANT button on your remote so that a channel select the desired channel, and press (_ again. number appears. 2 Press • or 4 on the select buttons to display the first u_m_ E_EJ letter or number of the caption and press _ to select it. (Repeat until all four digits are selected) ,. 3 Press _ to activate.Toerase a Caplion,press RESE'E. CHANNEL BLOCK CHANNEL With the CHANNEL BLOCK window open, you will be able to block two channels: 1,1. CH__- BLOCK 1 Select 1 or 2 and press (_. 2. CH__- Preventchildaccess 2 Press • or + on the select buttons to display the channel you want to block. _)MENU tocertainchannels. 3 Press _ to activate. Selecta program When you select the blocked channel, "BLOCKED" will appear on the screen. Caption Vision, XDS, and output from the Use _ (3_ Exit selected channel will also be blocked. To erase your CHANNEL BLOCK settings, press RESET while in the CHANNEL BLOCK window. When you perform AUTO PROGRAM, your CHANNEL BLOCK settings will be erased.

FAVORITE FAVORITE CHANNEL Setting FAVORITE CHANNEL: 1' MODE: MANUAL CHANNEL With the FAVORITE CHANNEL window open: 1.... _:;;Z Quickaccessto 1 Press _ and then 4, or + on the select buttons to select AUTO or MANUAL, and press _ again. 4 .... favoritechannels (SelectingAUTO willcausethe lastfive channelsthat youchosewiththe remotecontrol0-9 buttonsto be selected) Select a position 2 Press t or + on the select buttons to select 1,2, 3, 4, or 5 and press (_. Use Illtl _ Exit _] 3 Press 4, or + onthe select buttonsto select the desired channel and press _. Using FAVORITE CHANNEL: 1 Press (_, and your FAVORITE CHANNEL options appear. 2 Press t or _, to select the channel you want to watch, and press G_.

This feature allows you to label each input mode so that you can easily identifythe connected equipment (e.g. you VIDEO LABEL VIDEO LABEL can label VIDEO 1 IN as VHS). (KV-27V22, 29V22M only) Easy recognitionof 1' VIDEO t: VIDEO 1 1 Press t or + on the select buttons to select the input mode you want to label and press CD. VIDEO 2: VIDEO 2 connectedequipment 2 Press • or • to select the label and press C_). _MENU (e.g.DBS, VHS,etc.). VIDEO LABEL Options:

Video 1: VHS, 8mm, BETA, LD, GAME, DBS, DVD, WEB, RECEIVER Use _ _ Exit Video 2: VHS, 8ram, BETA, LD, GAME, DBS, DVD, WEB When VIDEO LABEL is set to WEB, the screen will darken significantly, creating an ideal picture for WebTV viewing. LANGUAGE (Except Canadian models) User'spreferred Select from available languages to cause all menus to appear in your language of choice. g Operating video equipment

Daewoo 341,312, 309 Singer 315 Setting the manufacturer's DBX 314, 336, 337 Samsung 322, 313, 321 Dimensia 304 Sanyo 330, 335 code Emerson 319, 320,316, 317, 318,341 Scott 312, 313, 321,335, 323, 324, 325, 326 Fisher 330, 334, 335, 333 Sharp 327, 328 You can use the supplied remote control to Funai 338 Shintom 315 operate Sony or non-Sony video equipment General Electric 329, 304, 309 Signature 2000 (M. Ward) 338, 327 that has an infrared sensor. Go Video 322 Sylvania 308, 309, 338, 310 Goldstar 332 Symphonic 338 1 Press CODE SET. Hitachi 306, 304, 305, 338 SV2000 338 2 Press VTR (FUNCTION). Instant Replay 309, 308 Tashiro 332 JC Penney 309, 305, 304, 330, 314, 336, 337 Tatung 314, 336, 337 3 Use the 0-9 buttons to key in the JVC 314, 336, 337 Teac 314, 336, 338, 337 manufacturer's code number from the Kenwood 314, 336, 332, 337 Technics 309, 308 Toshiba 312, 311 following chart. LXI (Sears) 332, 305, 333, 334, 330, 335, 338 Magnavox 308, 309, 310 Wards 327, 328, 335, 331,332 4 Press ENTER. Marantz 314, 336, 337 XR-1000 315 Marta 332 Yamaha 330, 314, 336, 337 Memorex 309, 335 Zenith 331 VCR manufacturer code Minolta 305, 304 Mitsubishi/MGA 323, 324, 325, 326 numbers Multitech 325, 338, 321 MDP manufacturer code NEC 314, 336, 337 Manufacturer Code numbers Olympic 309, 308 Sony 301,302, 303 Optimus 327 Manufacturer Code Aiwa 338, 344 Panasonic 308, 309, 306, 307 701 Admiral (M. Ward) 327 Pentax 305, 304 Sony 707 Audio Dynamic 314, 337 Philco 308, 309 Kenwood 703 Bell & Howell (M. Ward) 330,343 Philips 308, 309, 310 Magnavox Broksonic 319, 317 Pioneer 308 Marantz 702 Canon 309, 308 Quasar 308, 309, 306 Mitsubishi 702 Citizen 332 RCNPROSCAN 304, 305, 308, 309, 311, Panasonic 704, 71o Craig 315, 302, 332 312, 313, 310, 329 Philips 703 Criterion 315 Realistic 309, 330,328, 335, 324, 338 Pioneer 702 Curtis Mathis 304, 338, 309 Sansui 314 RCA 702,709 Sanyo 706 Operating a VCR Buttons on the remote Operating an MDP Buttons on the control remote control _harp 705 _amaha 703,708 To turn on or off Press VTR (POWER). To turn on or off Press VTR (POWER). To select a channel Press the 0 - 9 buttons. To play Press the It,,-. directly To stop Press II. Tips ""_ To change Press CH +/-. To pause Press II. channels • In some rare cases, you may not be able to operate To resume normal your non-Sony video equipment with the supplied To record Press I_- while pressing 0. playback, press again. remote control. In this case, please use the First release Imp,then To search the picture Keep pressing_ or <1<1 equipment's own remote control. release e. forward or backward duringplayback. To resume normal • The code numbers for Sony equipment are assigned at To play Press iP-. the factory as follows: To stop Press II. playback, release the button. To fast forward Press I_1_. VHS VCR 301 (preset code for To search the Press CH +/-. To rewind the tape Press <1<1. the supplied remote chapter forward or control) To pause Press I I. backward 8 mm VCR 302 To resume normal playback, press again. Beta, ED Beta VCRs 303 To search the Press _ or <1<1during picture forward or When you remove the batteries, the code number may playback. backward revert to the factory setting. To resume normal playback, release the button. To changeinput Press TV/VTR. mode B Operating a cable box or DBS receiver

If the remote control doesn't work Manufacturer code numbers Programming the remote (cable box) • First, try repeating the set up procedures You can program the supplied remote control using the other codes listed for your Manufacturer Code number to operate a cable box or DBS receiver. equipment. Hamlin/Regal 222, 223, 224, 225, 226 1 Press CODE SET. Tips "_" Jerrold/G. I. 201, 202, 203, 204, 205, 206, 207, 208, 218 2 Press DBS/CABLE (FUNCTION). • If more than one code number is listed, try entering them one by one until you come to the correct code for Oak 227, 228, 229 3 Use the 0-9 buttons to key in the your equipment. Panasonic 219, 220, 221 manufacturer's code number from the • If you entera new code number, the code numberyou Pioneer 214, 215 following chart. previously entered at that setting is erased. Scientific Atlanta 209, 210, 211 • In some rare cases, you may not be able to operate Tocom 216, 217 4 Press ENTER. your equipment with the supplied remote control. In Zenith 212, 213 this case, use the equipment's own remote control To operate the TV unit. Manufacturer code numbers Press TV (FUNCTION). Then use the TV Whenever you remove the batteries _ to replace (DBS receiver) control buttons to control the TV. them, for example _ if too much time is taken, the code numbers may revert to the factory setting and Manufacturer Code number For more details on operating the must be reset. Sony 801 (preset code for cable box or DBS receiver remote control) GENERAL ELECTRIC Refer to the operating instructions that come 802 with the equipment. RCA/PROSCAN 802 a Troubleshooting

Remove objects from the front of TV. Only snow and noise appear on the screen Troubleshooting Check the LIGHTSENSOR setting in the • Check the CABLE setting in the SET UP VIDEO menu. (page 13) _1opicture (screen not lit), no sound menu. (page 16) When one of the video inputs is labeled as • Make sure the power cord is plugged in. • Check the antenna/cable connections. WEB, the screen will darken significantly, • Operate with the buttons on the TV and the creating an ideal picture for WebTV Make sure the channel is broadcasting remote control. viewing. (KV-27V22, 29V22M only) (page programs. • Insert the batteries in the remote control 17) • Press ANT to change the input mode. with the correct polarity. (page 11) Good picture, no sound • Replace the batteries with new ones if they Dotted lines or stripes are weak. • Press MUTING so that "MUTING" disappears from the screen. (page 10) • Adjust the antenna. Check to see if the W/VIDEO setting is correct: when watching TV, set to TV, and • Check the MTS setting in the AUDIO • Move the TV away from noise sources when watching video tapes, set to VIDEO1 menu. (page 14) such as cars, neon signs, or hair-dryers. or 2. • Make sure SPEAKER is set to ON in the Double Images or ghosts • Try another channel. It could be station AUDIO menu. (page 14) trouble. • Perform AUTO SET UP again using the • Use a highly directional outdoor antenna or a cable (when the problem is caused by • Perform AUTO SET UP again using the SET UP button to return to the factory reflections from nearby mountains or tall SET UP button to return to the factory preset condition. (page 9) buildings). preset condition. (page 9) No color Poor or no picture (screen lit), good sound • Adjust the COLOR in the VIDEO menu. Cannot operate menu • Adjust PICTURE in the VIDEO menu. (page 13) • If the item you want to choose appears in (page 13) • Black and white programs cannot be seen gray, you cannot select it. Press TV/VIDEO in color. correctly. • Adjust BRIGHTNESS in the VIDEO menu. (page 13) Perform AUTO SET UP again using the Check antenna/cable connections. SET UP button to return to the factory preset condition. (page 9) Perform AUTO SET UP again using the SET UP buttonto return to the factory preset condition. (page 9) 21 l Troubleshooting (continued) J Specifications

Cannot receive upper channels (UHF) Cannot gain enough volume when using a Supplied accessories when using an antenna cable box • Make sure CABLE is OFF in the SET UP • Increase the volume at the cable box. Remote control RM-Y135A (1) menu. (page 16) Then press TV (FUNCTION) and adjust Batteries (2) size AA (R6) the TV's volume. • Use AUTO PROGRAM to add receivable channels that are not presently in TV TV is fixed to one channel Optional accessories memory. (page 16) Try turning CHANNEL FIX off. (page 16) Connecting cables Cannot receive any channels when using Use AUTO PROGRAM to add receivable VMC-810S/820S, VMC-720M, cable TV channels that are not presently in the TV YC-15V/30V, RK-74A • Make sure CABLE is ON in the SET UP memory. (page 16) TV Stand SU-27A menu. (page 16) To reset the TV: First, turn the TV on. (KV-27S22, 27V22, 29PS2, 29RS22, • Use AUTO PROGRAM to add receivable Then while pressing the RESET key on 29RS22C, 29SD2, 29V22M (except Canadian channels that are not presently in TV the remote, press the POWER key on the models)) memory. (page 16) TV. The TV will turn itself off, then back TV Stand SU-32A on. When the TV turns on again, all (KV-32S22 (except Canadian models)) Remote control does not operate settings will be reset, and the EASY U/V mixer EAC-66 • Batteries could be weak. Replace the SETUP GUIDE will appear. batteries. • Press TV (FUNCTION) when operating your TV. • Make sure the TV's power cord is connected securely to the wall outlet. • Locate the TV at least 3-4 feet away from fluorescent lights. • Check the S-Link connection. (page 3,4) JJ W Specifications (continued)

KV- 27S22 27V22 29PS2 29RS22 29RS22C 29SD2 29V22M 32S22 Power requirements 120 V, 60 Hz 120 V, 60 Hz 120 V, 60 Hz 120 V, 60 Hz 220V,50/60 Hz 120 V, 60 Hz 120 V, 60 Hz 120 V, 60 Hz _Number of inputs/outputs Video 1) 1 2 1 1 1 1 2 1 S Video 0 1 0 0 0 0 1 1 Audi0 3) 1 2 1 1 1 1 2 1 Audio out 4) 1 1 1 1 1 1 1 1 Monitor out 1) 0 1 0 0 0 0 1 0 Speaker output ON) 5Wx2 5Wx2 5Wx2 5Wx2 5Wx2 5Wx2 5Wx2 5Wx2 Power consumption (W) In use (Max.) 160W 180W 160W 160W 160W 160W 180W 180W In standby 9W 9W 9W 9W 9W 9W 9W 9W Dimensions (W/H/D) 660.4x602.5 690x575.4 660.4 x 602.5 i660.4 x 602.5 660.4x602.5 !66o.4x6o2.5690x575.4 781 x712.1 (ram) x 521.2 mm x 503.4 mm x 521.2 mm 521.2 mm x 521.2 mm x521.2 mm x 503.4 mm x 582.5 mm (in.) 26 x 23 s/4 27 1/4x 22 3/4 26 x 23 3/4 26 x 23 s/4 26 x23 3/4 26 x 23 3/4 27 1/4x 22 3/4 30 3/4x 28 1/8 x20%in, x 19Thin. x20%in, x20%in, x20%in, x20%in, x 19_/8in. x23in. Mass (kg) 40.6 kg 43 kg 40.6 kg 40.6 kg 40.6 kg 40.6 kg 43 kg 64.3 kg (Ibs) 891bs8oz 941bs13oz 891bs8oz 891bs8oz 891bs8oz 891bs8oz 941bs13oz 1411bs12oz

_elevision system Antenna American TVstandard 75 ohm external terminal for VHF/UHF (O) ® SRS (SOUND RETRIEVAL SYSTEM) I :hannel coverage VHF: 2-13/UHF: 14 -69/CATV: 1 - 125 1) 1 Vp-p, 75 ohms unbalanced, sync negative The (e) SRS (SOUND RETRIEVAL SYSTEM) is qcture tube 2) y: 1 Vp-p, 75 ohms unbalanced, sync negative manufactured by Sony Corporation under license Hi Black Trinitron ®tube C: 0.286 Vp-p (Burst signal), 75 ohms from SRS Labs, Inc. It is covered by U.S. Patent No. lisible Screen size 3) 500 mVrms (100% modulation), Impedance: 47 4,748,669. Other U.S. and foreign patents pending. 27-inch picture measured diagonally (KV-27S22, kilohms 27V22, 29PS2, 29RS22, 29RS22C, 29SD2, 29V22M) _ More than 408 mVrms at the maximum volume I Theregisteredword 'SRS'trademarksand the SRSof SRSsymbolLabs,(@)Inc.are 32-inch picture measured diagonally (KV-32S22) actual screen size setting (variable) More than 408 mVrms (fix) Design and specifications are subject to 29-inch picture measured diagonally (KV-27S22, change without notice. 27V22, 29PS2, 29RS22, 29RS22C, 29SD2, 29V22M) Impedance: 50 kilohms 34-inch picture measured diagonally (KV-32S22) 23 Index

A CH +/-...... 10 F Adjusting your SET UP ...... 12 CHANNEL ERASE/ADD ...... 16 Factory settings ...... 13, 14 Antenna cable ...... 2 CHANNEL BLOCK ...... 16 FAVORITE CHANNEL ...... 17 Antenna connector ...... 2 CHANNEL CAPTION ...... 16 Features table ...... 1 AUDIO menu operations ._ CHANNEL FIX ...... 16 G, H AUDIO OUT ...... 14 COLOR ...... 13 Hook Ups ...... 2 BALANCE ...... 14 Connecting TV to HUE ...... 13 BASS ...... 14 antenna ...... 2 EFFECT ...... 14 audio system ...... 6 I, J, K MTS ...... 14 cable ...... 2 JUMP button ...... 10 SPEAKER ...... 14 cable box ...... 2 L TREBLE ...... 14 camcorder ...... 6 Language selection ...... 9, 17 AUDIO OUT DBS receiver ...... :...... 5 Learning menus FIXED ...... 14 DBS receiver and VCR ...... 5 AUDIO ...... 14 VARIABLE ...... 14 two VCRs ...... 7 SET UP ...... 16 Audio Video Cable ...... 2 VCR ...... 3 TIMER ...... 15 AUTO PROGRAM ...... 9 CURRENT TIME SET ...... 15 VIDEO ...... 13 TM '_ AUTO SET UP ...... 9 D LIGHTSENSOR ...... 1,. B DAYLIGHT SAVING ...... 15 M, N BALANCE ...... 14 DBS receiver operation ...... 20 MDP operation ...... I c BASS ...... 14 DISPLAY Menu selection ...... 15 Battery installation ...... 8 Caption vision ...... 11 Mode BRIGHTNESS ...... 13 Status ...... 11 MOVIE ...... If- C XDS ...... 11 SPORTS ...... 1," CABLE ...... 16 E STANDARD ...... Monitor out ...... : Cable box ...... 2, 4 Editing using monitor out ...... 7 Mono ...... I_ operation ...... 20 EFFECT MTS Caption Vision ...... 11 SIMULATED ...... 14 CATV cable ...... 2 SRS ...... 14 MAIN ...... 14 SAP ...... 14 Coaxial cable ...... 2, 3, 4 Surround ...... 14 MONO ...... 14