Troche & Lozenge Molds For Use in R&D • Pharmacy Compounding • Nutritional Supplements • Foods by ProFiller® Makes 100 Troches & Lozenges • Plates are precision machined to prevent solution leakage • For long life, plates are from hard anodized aluminum with Inox 316 (stainless steel) Mold helicoil screw thread inserts and use screws Plate that do not fall out. • Anodized parts discolor in automatic dishwashers and are engraved not for Base dishwasher use to prevent operator error. Plate
Item Code: X-TLM $415.00
Visit www.torpac.com for more information on this product
Instruction Overview
Lozenges Prepare mixture and pour into holes. Let settle for 20 minutes then scrape excess mixture using a hard rubber spatula. Place mold in refrigerator to harden. Remove and unscrew two plates. Lift top plate to remove lozenges from mold. Use fingers to eject any stuck lozenges.
Mold Specifications Lozenge & Cavity Specifications Lozenge Diam. 0.48" 12.3mm Mold is 12.5" (31.6cm) in length, 6" (15.2cm) in width, 0.6" (1.45cm) in height and weighs 3.7lbs (1.7kg). Lozenge Height. 0.2" 5mm Cavity Diam. 0.5" 12.7mm Cavity Height 0.2" 5mm
Formulas For more information on making Troches (lozenges) visit the following websites Custom http://pharmlabs.unc.edu/labs/lozenge/lozenges.htm Sizes https://www.perrigorx.com/pdfs/Sec%20Artem%204.2.pdf Available Links provided as a service and do not imply an endorsement by UNC, Dr. Shrewsbury or Perrigo. Cleaning on reverse ProMolds by ProFiller Designed & Manufactured by:
www.torpac.com • [email protected] T: 973-244-1125 F: 973-244-1365 333 US 46, Fairfield, NJ 07004, USA ProMold TTM ProMold RDTM ProMold RMS ProMold ATM 2 ProMold TLM Brochure 1911 USG0 Cleaning & Other Products
Cleaning Remove the thumb screws to disassemble Cavity Plate from Base Plate before cleaning. Automatic Dishwasher Restrictions: Hard anodized aluminum may be cleaned on rinse cycle only in an automatic dishwasher. Automatic dishwasher detergents can discolor anodized aluminum. Cleaning Agents: We recommend household dishwashing liquid. Do not use acidic or caustic cleaning solutions. Do not clean with abrasive cloth, gritty materials, or steel wool. Use only a soft cloth or sponge. Surface of anodized aluminum Teflon® coating can be scratched and its non-stick properties damaged. Isopropyl Alcohol Cleaning or Drying: May be cleaned with isopropyl alcohol. Wipe with a cloth dipped in Isopropyl Alcohol, then immediately wipe dry with a clean cloth. Hot Air Drying: May be dried in a hot air oven or using a portable hair dryer. Autoclave: Autoclave safe.
2