Bottled Filtration Selection guide for products and applications Contents

Introduction :...... 3

Schematic :...... 4

Branding and local legislation: ...... 5

Application 1. Final stabilization :...... 6

Application 2. Pre-stabilization :...... 7

Application 3. Clarification :...... 8

Application 4. Sterilization of gases :...... 9

Application 5. Water utilities :...... 10

Application 6. Gas utilities :...... 11

Filter housings :...... 12

Product selection process :...... 13

Selecting the final filter :...... 14

Products :...... 15-17

Parker domnick hunter has a continuous policy of product development and although the Company reserves the right to change specification, it attempts to keep customers informed of any alterations. This publication is for general information only and customers are requested to contact our Process Filtration Sales Department for detailed information and advice on a product’s suitability for specific applications. All products are sold subject to the company’s Standard conditions of sale. Introduction Protecting the purity of bottled worldwide

Multinational corporations and bottled water production process we boutique producers of bottled water aim to offer value added filtration brands across the globe have solutions which adhere to our partnered with Parker domnick application led philosophies of hunter for over 30 years to increasing process efficiency and successfully reach their quality and reducing wastage. production requirements. Filtration solutions from Parker From factory to factory, every bottled domnick hunter are supported water process is different depending through a structured pre and after upon; the category and branding of sales program called Purecare. The the finished bottled product, the local Purecare approach by Parker legislation of the intended market and domnick hunter ensures tailored the source of the water itself. filtration solutions are provided which meet the specific performance These differences influence the criteria required by a given process. performance expectations of the Through a program of technical filtration systems used and generate analysis available from a network of a wide degree of choice in approach. international support hubs, we work By understanding the specific with end users. Continued process requirements for each stage of the optimization is our duty.

Consultation Assessment Review and Plan Implementation

| 3 Typical processes

➍ Parker domnick hunter ➍ filter applications

➊ ➊ Final stabilization ➋➌ ➎ ➋ Pre-stabilization ➌ Clarification ➍ ➍ ➍ Sterilization of gas ➊ ➎ Water utilities

➋ ➏ Gas utilities ➌ NATURAL WATER (NMW)

➌

SPRING WATER / TABLE WATER

➏

| 4 Branding and local legislation Understanding the application

Throughout the world, there are three If the product is to be marketed as main classifications of bottled water natural (NMW) in What’s in your bottle ? recognized; natural mineral water, Europe, then the Official Journal of water and table water. the EU specifies that any“ disinfection Depending upon the country where the treatment by whatever means and, the water is produced and the intended addition of bacteriostatic elements or Natural mineral water Spring water Bottled water country of consumption, regulations any other treatment likely to change the apply to the production techniques viable colony count of the natural mineral used for each type of bottled water. For water shall be prohibited”. Natural mineral waters must Bottled at source and microbially Bottled water or “table water” example in Europe please see Directive be bottled at source, via a direct safe at source. Does not require must comply with local pipeline from source to bottle. a stable mineral content. standards and 2009/54/EC, for American standards With these requirements in mind, it is Water must be microbiologically can be treated, disinfected, or see IBWA. important to promote a grade of safe at source without de-chlorinated. Removal and disinfection and have a stable remineralization is permitted BEVPOR filter which can retain these mineral content. to create a desired mineral These regulations influence the levels contaminants but not influence the balance and taste. Carbon of treatment which are permitted to natural microflora of the source water. dioxide may be added to create a sparkling water. produce each product, so care must be In this case, a fully validated taken to understand the restrictions of sterilizing grade BEVPOR filter would each individual plant when proposing be unsuitable for bottled water filtration solutions. marketed as NMW. The micron rating of the BEVPOR product can therefore It is essential that the bottled water be decided through a consultative must be safe to drink, so it must be process to clearly define the target free from pathogenic organisms such contaminants required to be removed, as: whilst protecting the natural • Eschericia coli microflora present from the source. • Faecal streptococci • Non-sporulated sulphite reducing anaerobes • Pseudomonas aeruginosa

| 5 Application 1. Final stabilization Understanding the application

This application is termed “critical” 0.2µm BEVPOR M filters are fully Bottle filling / as it is the final barrier to remove validated sterilizing grade filters and packaging microbial contamination before provide sterile effluent when packaging. challenged with >107 cfu ➊ Brevundimonas diminuta per cm2. Membrane filtration by BEVPOR BEVPOR P grade filters are classed products will reliably remove any as non-sterilizing but will effectively Final stabilization contaminating organisms from the remove contaminating organisms from water while protecting the purity and water, to ensure product safety whilst essential constituents which contribute complying with EU legislation. towards the water’s unique properties. Some bottled water producers may Key filter requirements Filter selection at this stage should require a validated Cryptosporidium • Validated microbial retention be driven by the classification of the removal filter. CRYPOTCLEAR PES / • Integrity testable bottled water and the local legislation CRYPTOCLEAR PLUS filters provide a • High flowing regarding exploitation of the source range of retention efficiencies in either • Non-leaching water. membrane integrity testable or depth • Frequent SIP / CIP format. Our global network of Technical Support Group (TSG) scientists can assist in verification of the optimum grade of BEVPOR filter either through laboratory trials, or in-line BEVPOR PS/MS BEVPOR PW/MW BEVPOR PH/MH performance assessments. However, • 0.6m2 filtration area • 0.6m2 filtration area • High surface area 0.8m2 based on over 30 years of supplying • Integral prefilter layer • Integral prefilter layer this industry, use of either 0.2µm or • Optimum solution for extended service life / 0.45µm BEVPOR P/M grade filters volume throughput

would be suitable for this application } worldwide. Size guide 10-15l/min/10¨cartridge 0.6-0.9m3/h/10¨cartridge See page 15 for rating guide

| 6 Application 2. Pre-stabilization Membrane filter Understanding the application protection

The primary function of pre-stabilization As the product water moves through the filters is to protect the final membrane bottling facility, intermediate storage filters from colloidal particulate. may be necessary. Pre-stabilization Pre-stabilization filters will limit the levels of Most waters, while appearing visually microorganisms entering the ➋ clear, actually have a very large amount storage tanks so the potential for ➌ of suspended solids moving in solution. biofilm development will be reduced. These are called colloids and are This control on microbial growth within Key filter requirements generally sub-micron in size. The main the facility will optimize the operation • Retention to colloidal species constituents of these colloidal species of the final stabilization filters prior to • Stable construction for reliable are ions (Fe3+) which have leached into bottling and return a more hygienic retention the water from the source associated processing environment. • Strength to withstand CIP with organic material. These small, • High flowing suspended particles are the major cause of membrane filter blockage, so their removal prior to membrane filtration will result in longer service life ➋ NEW of the membranes and lower long-term PREPOR PP PREPOR NG running costs. • Microbial reduction • Retention to 0.5 µm • Excellent mechanical absolute strength • More retentive advanced depth construction • Superior membrane protection ➌ PEPLYN PLUS PEPLYN HA

• Absolute retention at a • High area to give range of micron grades long life • Designed for backwash regeneration }

Size guide 10-15l/min/10¨cartridge 0.6-0.9m3/h/10¨cartridge See page 15 for rating guide | 7 Application 3. Clarification Understanding the application

Water entering a bottling facility directly If chemical modification of the source Point of entry from a source is sometimes referred to as water is permitted (for anything other filtration point of entry (POE) and will require than natural mineral water), clarification filtration to remove any adsorptive carbon filtration of the water ➌ insoluble contaminants such as sand, silt can be employed to reduce any or debris before entering intermediate or chemical taints which could storage. otherwise affect flavour or cause Clarification precipitation issues. Use of a carbon Typically the filtration employed for this granulated filter will require a trap filter requirement will be designed to handle a downstream to collect any carbon high and variable particle loading. fines entering the process. Key filter requirements Carefully selected retention and Where unstable components such as • Ability to withstand blockage under construction of the filter at this stage in and manganese result in precipitation of variable particle loading the process will greatly influence the small particles, backwashable • Stable construction for reliable performance of further downstream clarification filters such as PEPLYN HA particle retention filtration and overall process efficiency. provide an efficient means of removal. • Strength to withstand high pressure

• High flowing

PARMAX / PEPLYN HD PEPLYN HA MAXGUARD

• Large format for high • High depth for variable • High filtration area area and high flow particle loading • Designed for backwash • Ease of use to • Excellent retention and regeneration changeout resistance to blockage } }

Size guide Size guide 20¨- 40m3/h 10-15l/min/10¨cartridge 40¨- 80m3/h 0.6-0.9m3/h/10¨cartridge 3 60¨- 120m /h See page 15 for rating guide See page 16 for rating guide | 8 Application 4. Sterilization of gases Understanding the application

Compressed gases which come into Bottling and tank vent direct contact with: product ingredients, filtration ➍ the finished bottled product, packaging materials, storage vessels or the machinery, are termed critical and require sterile filtration to safeguard against a Gas sterilization potential microbial contamination.

Typically filling machines use compressed gases at some point in the operation of bottle filling, whether for Key filter requirements bottle forming, bottle rinsing / drying or • Fully validated microbial retention product pushing. The gases will require • Integrity testable sterilization to prevent a microbial • Hydrophobic to prevent blinding contamination compromising the with moisture finished product once packaged. • High flowing to reduce operational costs and increase energy efficiency

HIGH FLOW BIO-X HIGH FLOW TETPOR II

• Fully retentive to aerosol • Optimum pleat bacteria configuration • Superior flow rates • Unrivalled flow rates • PTFE impregnated combined with low depth media pressure drops

For sizing consult your parker domnick hunter representative or sizing calculator

| 9 Application 5. Water utilities

Service water Process water

RO membrane Point of entry CIP makeup Bottle washing clarification protection

NEW PARMAX / PARMAX / PEPLYN PLUS PEPLYN PLUS PEPLYN PLUS BEVPOR WG BEVPOR MS MAXGUARD MAXGUARD

• Absolute retention for a • Large diameter • Absolute retention for a • Large diameter • Absolute retention for a • Validated microbial • Validated microbial range of micron grades • Bulk water treatment range of micron grades • Bulk water treatment range of micron grades removal against water removal against water • Pleated polypropylene • Pleated polypropylene • Pleated polypropylene borne bacteria borne bacteria • Integrity testable

| 10 Application 6. Gas utilities

Compressed air Production or process Steam pretreatment / generation air / gas

No product Product contact contact

• Sterilization • Product carbonation / • Nitrogen blanketing / • Purging • Culinary 3A standard filling flushing • Venting top pressure 609-03

SINTERED SINTERED PLEATED AO AA PCO MAXIGAS HIGH FLOW BIO-X 2 25 µm 1 µm 1 µm

• Compressed gas filter • Compressed gas filter • Protection • Generates N2 in-house • Hydrophobic glass • 21 - 82 Kg / hr • 21 - 82 Kg / hr • 150 - 280 Kg / hr

• Particle removal • Particle removal • Added sterility of CO2 irradicating need to microfibre to 1 micron to 0.01 micron quality buy in • Aerosol integrity test • Remaining oil content • Remaining oil content • Protection against • On demand, convenient VALAIRDATA 3 0.5 ppm 0.01 ppm impurities resulting in and secure supply flavour defects • High purity supply PLEATED PLEATED JUMBO • Easy maintenance • Modular design allows HIGH FLOW AX ACS 5 µm 1 µm expansion TETPOR II • Cost-effective supply • 150 - 280 Kg / hr • 750 - 3750 Kg / hr • Ultra high efficiency • Oil vapour and odour • Hydrophobic gas filter removal membrane filter • Particle removal • Air quality to ISO 8573.1; • Liquid and aerosol Culinary 3A Standard 609-03 to <0.01 micron Class 1 oil integrity testing • 95% retention of >2 micron particles in the liquid phase • Remaining oil content • Manufactured from 316 series stainless steel 0.001 ppm • Any additives to the boiler feed should conform to CFR Title 21, Chapter 1, Part 173, Section 173.310 | 11 Filter housings

Air / gas Tank Liquid Steam housings vents housings housings

Direct Indirect Single and multi style Single and multi large format 780-1300 Kg/hr 62-280 Kg/hr product contact product contact filter housings C Style filter housings (PARMAX)

HSA HBA HSV HBA HSL HIL VSH HPM VIS HBA-HP

• High specification • Sanitary air / gas • Open vent housing • Closed tee port air / gas • Sanitary liquid housing • Liquid housing • Sanitary multi-round • Single, 3 and 5 round • Jumbo HIGH FLOW • Industrial air / gas sanitary air / gas housing • Choices of finish • Choices of finish • Choices of finish • Internal finish • Internal finish housing housings steam vessels • Choices of finish • Internal finish available available available - 0.4 µm Ra - As welded range 3 - 30 round • Horizontal or verticle • Internal finish available - 0.4 µm Ra • External finish • External finish • Internal finish orientation - 0.8 µm Ra • External finish - 0.25 µm Ra - 0.8 µm Ra - <0.8 µm Ra • Selection of ISO, - 100% pickled & - 0.8 µm Ra • Electropolished option • External finish BS4504, DIN2633 and passivated - Mechanically polished ANSI RF150 connection • External finish flanges - Grit blast 5 µm Ra

| 12 Product selection process

There is no one single solution to any filtration application, it is a balance of factors which dictates performance S E L E C T and cost-effectiveness.

Depending upon the legislation surrounding the branding of the START with the COMPETITIVE TECHNICAL bottled water, the production EFFICIENCY LIFE ECONOMY methods will vary. end in mind ADVANTAGE SUPPORT

The Purecare program outlines the required information prior to establishing a filtration solution and • What is the customer • What grade of filter ? • Any filter system will • Existing housings • Differentiation through • Establish the local TSG the assessment methods used to trying to achieve ? --Generally most open have a finite lifetime. support packages contact identify the suitability of any Parker --Why is filtration will be optimal What are the • Endcap configuration Purecare domnick hunter solution. required? --Is validation required? expectations? --Contract testing • Establish a monitoring --What is the end user’s • Operational --Filter changeout program primary performance • How will retention be • Life to blockage efficiency --Operator training criteria ? measured in the --Time in service? --CIP program? --Remote monitoring • Purecare benefits The SELECT process builds on the --Is this application application ? --Volume throughput? --Storage details? --Process audits --Operator training principles used to select the optimum critical ? --Integrity testable? --Flow rate? --Technical audits - - • How can - filtration solution for the end user. -Impact upon -Prefiltration -Troubleshooting • What are the target downstream process? --CIP procedures? improvements be Starting with the end in mind, contaminants ? --Shift patterns? made? Is there a following the outlined procedure monitoring will help to identify a suitable • Legislation / • Life to integrity - check program regulation requirements - established? filtration solution. -CIP /SIP details --Pressure shock --Thermal shock

| 13 Selection matrix

r er d e t lt o tt s it o e e fi G B B e

r P TETPOR II PARMAX / PARMAX PROPLEAT PEPLYN HA PEPLYN PEPLYN HD PEPLYN HIGH FLOW HIGH FLOW PREPOR PP MAXGUARD BEVPOR MS PREPOR NG P 3 2 1 BEVPOR WG PEPLYN PLUS PEPLYN CARBOFLOW MX CARBOFLOW BEVPOR PS / MS HIGH FLOW BIO-X HIGH FLOW BEVPOR PH / MH BEVPOR PW / MW

Point of entry clarification 1 3 2

Dechlorination P P 1

RO membrane protection 3 2 1 Water Utilities Water

Bottle washing P 2 1

Point of entry clarification 3 2 1 Clarification

Membrane protection stage 1 2 1

Membrane protection stage 2 P 2 1 Pre-stabilization

Bottle filling / packaging P 3 2 1 Final Stabilization

Tank venting 2 1

Bottling

Gas Sterilization 2 1 | 14 Clarification

PEPLYN HD PEPLYN HA

5, 10, 15 micron Polypropylene 5,10, 15 micron Polypropylene

• Graded density and increased depth resulting in high dirt holding capacity • Graded density results in high dirt holding capacity • Ideally suited to high volume, forward flow processes • Optimized pleat configuration maximizes backwash efficiency

PEPLYN HD has been developed using graded pore density depth polypropylene media for PEPLYN HA filters have been specially designed to capture particles on the surface of the clarification of bottled water. The PEPLYN HD has outstanding particulate holding capacity media so that they can be easily removed through backwash, therefore, allowing easy through its multi-layer depth construction providing optimized filtration for bottled water regeneration and long service lifetimes. The high area filter media will return high water with high particulate loading and size distribution. flow, whilst providing an absolute retention to solid particulate.

Pre-stabilization PREPOR NG PREPOR PP

0.5 - 1.0 Polypropylene 0.6 - 1.0 micron Polypropylene

• Validated reduction of regulated organisms • Bacterial reduction • Graded density construction for increased retention and throughput • Strong, pleated polypropylene construction for CIP • Strong, pleated polypropylene construction for chemical CIP

Combining a superior level of microbial retention with a strong and robust construction to PREPOR PP filter cartridges will significantly reduce the numbers of bacteria from withstand frequent CIP, PREPOR NG filters represent the optimum choice for membrane beverage products, to provide extremely cost effective prefiltration. protection and tank transfer operations.

Final stabilization BEVPOR PS / MS BEVPOR PW / MW BEVPOR PH / MH

0.2 and 0.45 micron Polyethersulphone 0.2 and 0.45 micron Polyethersulphone 0.2 and 0.45 micron Polyethersulphone

• Validated microbial retention for effective stabilization • Validated microbial retention for effective stabilization • Validated microbial retention for effective stabilization 2 • 0.6m2 filtration area • 0.6m filtration area • High filtration area – 0.8m2 • Integral prefilter layer • Integral prefilter layer BEVPOR PS filters have been validated against typical bottled water spoilage organisms. BEVPOR PW filters have been validated against typical bottled water spoilage organisms. BEVPOR PH filters have been validated against typical bottled water spoilage organisms. Combined with easy integrity testing, the filters ensure the effective microbial stabilization of Combined with easy integrity testing, the filters ensure the effective microbial stabilization of Combined with easy integrity testing, the filters ensure the effective microbial stabilization of bottled water. The advanced polyethersulphone membrane has been configured to provide bottled water. The advanced polyethersulphone membrane in conjunction with the integral bottled water. The advanced, high area polyethersulphone membrane in conjunction with the high flow and cost-effective performance throughout the range of grades. prefilter layer provides extended service life to blockage and improved filtration economics. integral prefilter layer will provide maximum service life to blockage and the optimum solution for bottled water stabilization.

| 15 Air / Gas filtration HIGH FLOW BIO-X HIGH FLOW TETPOR II

0.01 micron sterilizing PTFE Impregnated Glass Fibre 0.01 - 0.2 micron Polypropylene Expanded PTFE

• 94% voids volume PTFE impregnated glass fibre • Assured biosecurity with absolute rated filtration • Exceptional flow rates with low pressure drops • High flow rates with low pressure drops • Integrity testable by aerosol challenge • High voids volume PTFE membrane HIGH FLOW BIO-X combines proven depth filter technology and a pleated construction HIGH FLOW TETPOR II sterilization filter cartridges offer exceptional filtration to provide retention down to 0.01 micron in gas. Flow rates typically 2-3 times that of performance whilst providing the highest levels of biosecurity throughout the process membrane filters make HIGH FLOW BIO-X the filter that can dramatically reduce cartridge industry. Operating at ambient temperature conditions, HIGH FLOW TETPOR II filter usage and installation size within the fermentation, food and beverage industries. cartridges provide a cost effective filtration solution.

Water treatment PROPLEAT PARMAX PEPLYN PLUS

1.0 – 10 micron Polypropylene 1 – 20 micron Polypropylene 0.6 – 25 micron Polypropylene

• Economical solution to particle removal • Large diameter filtration for high flow rates and high capacity • Absolute particle retention at a range of micron grades • Absolute retention ratings for critical filtration • Strong, pleated polypropylene construction designed for chemical CIP

PROPLEAT filters have been developed to bridge the gap between meltblown depth filters PARMAX filters offer the optimum solution to bulk water treatment where costs of PEPLYN PLUS filters are utilized for the clarification and pre-stabilization of a wide range of and absolute pleated media filters. The all polypropylene construction exhibit 99% equipment space are at a high premium. The use of PARMAX large diameter cartridge and liquids for the food and beverage industry. efficiency at their given retention rating, providing consistent and economical clarification housing offers a smaller footprint which is advantageous. The cartridges are available in in a diverse range of applications. absolute micron ratings from 1 to 20 microns.

BEVPOR WG BEVPOR MS

0.2 micron Polyethersulphone 0.2 micron Polyethersulphone

• Validated microbial removal against water borne bacteria • Validated microbial removal against waterborne bacteria • Integrity testable

BEVPOR WG filters utilize a pleated PES membrane to remove bacterial contamination from BEVPOR MS filters utilize a pleated PES membrane to remove bacterial contamination from water, ensuring the water supply entering the facility is of a safe standard to reduce the risk of water, ensuring the water supply entering the facility is of a safe standard to reduce the risk of biofilm formation / product spoilage. biofilm formation / product spoilage. Added security is ensured through ease of repeat integrity testing.

| 16 Housings VSH HBA HSV

• Multi-element sanitary liquid housing • Flow efficient range of air / gas housing • Industrial vent housing • Designed specifically for the food and beverage industry • Designed to maximize flow and minimize pressure drop • Direct connection to tank boss allows housing to • High quality crevice free construction • Designed specifically for the food and beverage industry be self supported • Available for 3 to 30 round filters • Corrosion resistant 316L stainless steel • Easy assembly and maintenance

HSL HIL HSA

• Single-element sanitary liquid housing • Industrial single-element liquid housing • Flow efficient sanitary range of air / gas housing • Designed specifically for the food and beverage industry • BSPP inlet / outlet standard connections • Designed specifically for the food and beverage industry • Sanitary vent, tri-clamp connections as standard • Suitable replacement for plastic housings • Sanitary tri-clamp, vent and drain connections as standard • Sanitary tri-clamp body closure as standard • Suitable for cartridge types DOE or 222 and 226 • Sanitary tri-clamp body closure as standard

VIS HBAHP

• Air / gas and steam housing • High efficiency steam filter housing • For pressures up to 15 barg (232.06 psig) @ 205 °C (401 °F) • Compatible with JUMBO element to maximize • Double bolted clamp for extra security steam capacity • Available with many connection types

Integrity testing equipment VALAIRDATA 3 BEVCHECK BEVCHECK PLUS

• Aerosol challenge testing • Pressure decay and diffusional flow testing • Pressure decay and diffusional flow testing • Integrity testing of gas filters • Hand held portability with rechargeable battery option • Convenient built-in printer provides printed test report • Flexible: suitable for use with compressed air or nitrogen • Flexible: suitable for use with compressed air or nitrogen

Compressed air pre-treatment

OIL-X PCO2 MAXIGAS

• The most energy efficient filters available • Ensures compliance with quality guidelines published by • Low life-cycle ownership cost and elimination of costs • High quality ISO8573.1:2001 compressed air the International Society for Beverage Technologies (ISBT) associated with a cylinder supply • Running costs that start low and stay low • Protects drinks manufacturing processes from • On-demand functionality limits waste | 17 vapour impurities • Energy efficient: operates from a small compressor Parker Worldwide Europe, Middle East, [email protected] Tel: +31 (0)541 585 000 UA – Ukraine, Kiev KR – South Korea, Seoul [email protected] Tel +380 44 494 2731 Tel: +82 2 559 0400 Africa DK – Denmark, Ballerup [email protected] AE – United Arab Emirates, Tel: +45 43 56 04 00 NO – Norway, Asker MY – Malaysia, Shah Alam Dubai [email protected] Tel: +47 66 75 34 00 UK – United Kingdom, Tel: +60 3 7849 0800 [email protected] Warwick Tel: +971 4 8127100 ES – Spain, Madrid NZ – New Zealand, Mt Tel: +44 (0)1926 317 878 [email protected] Tel: +34 902 330 001 PL – Poland, Warsaw Wellington [email protected] AT – Austria, Wiener Neustadt [email protected] Tel: +48 (0)22 573 24 00 Tel: +64 9 574 1744 [email protected] ZA – South Africa, Kempton Tel: +43 (0)2622 23501-0 FI – Finland, Vantaa SG – Singapore Park [email protected] Tel: +358 (0)20 753 2500 PT – Portugal, Leca da Tel: +65 6887 6300 Tel: +27 (0)11 961 0700 [email protected] Palmeira AT – Eastern Europe, Wiener [email protected] TH – Thailand, Bangkok Tel: +351 22 999 7360 Neustadt FR – France, Contamine s/Arve Tel: +662 717 8140 [email protected] Tel: +43 (0)2622 23501 900 Tel: +33 (0)4 50 25 80 25 North America TW – Taiwan, Taipei [email protected] [email protected] RO – Romania, Bucharest CA – Canada, Milton, Ontario Tel: +886 2 2298 8987 Tel: +40 21 252 1382 Tel: +1 905 693 3000 AZ – Azerbaijan, Baku GR – Greece, Athens [email protected] Tel: +994 50 2233 458 Tel: +30 210 933 6450 US – USA, Cleveland [email protected] [email protected] RU – Russia, Moscow Tel: +1 216 896 3000 South America Tel: +7 495 645-2156 BE/LU – Belgium, Nivelles HU – Hungary, Budapest AR – Argentina, Buenos Aires [email protected] Tel: +32 (0)67 280 900 Tel: +36 1 220 4155 Tel: +54 3327 44 4129 [email protected] Asia Pacific [email protected] SE – Sweden, Spånga BR – Brazil, Sao Jose dos Tel: +46 (0)8 59 79 50 00 AU – Australia, Castle Hill BY – Belarus, Minsk IE – Ireland, Dublin Campos [email protected] Tel: +61 (0)2-9634 7777 Tel: +375 17 209 9399 Tel: +353 (0)1 466 6370 Tel: +55 12 4009 3500 [email protected] CN – China, Shanghai [email protected] SK – Slovakia, Banská Bystrica CL – Chile, Santiago Tel: +421 484 162 252 Tel: +86 21 2899 5000 CH – Switzerland, Etoy IT – Italy, Corsico (MI) Tel: +56 2 623 1216 Tel: +41 (0)21 821 87 00 [email protected] HK – Hong Kong Tel: +39 02 45 19 21 MX – Mexico, Apodaca [email protected] Tel: +852 2428 8008 [email protected] SL – Slovenia, Novo Mesto Tel: +52 81 8156 6000 Tel: +386 7 337 6650 CZ – Czech Republic, Klecany KZ – Kazakhstan, Almaty IN – , Mumbai [email protected] VE – Venezuela, Caracas Tel: +420 284 083 111 Tel: +7 7272 505 800 Tel: +91 22 6513 7081-85 parker.czechrepublic@parker. Tel: +58 212 238 5422 [email protected] TR – Turkey, Istanbul JP – Japan, Tokyo com Tel: +90 216 4997081 NL – The Netherlands, Tel: +81 (0)3 6408 3901 [email protected] DE – Germany, Kaarst Oldenzaal Tel: +49 (0)2131 4016 0

© 2014 Parker Hannifin Corporation Parker Hannifin Ltd Parker Hannifin Corporation domnick hunter domnick hunter GL_BW_12_07_14_Rev. 1D Process Filtration - Europe Process Filtration - North America Durham Road 2340 Eastman Avenue Birtley, Co. Durham Oxnard, California, USA 93030 DH3 2SF, England toll free: +1 877 784 2234 phone +44 (0)191 4105121 phone: +1 805 604 3400 fax +44 (0)191 4105312 fax: +1 805 604 3401 email: [email protected] email: [email protected] www.parker.com/processfiltration www.parker.com/processfiltration