C10 Endura SS C10BK Endura C10TR Endura Trainer C11 Delica SS C11BK Delica C11TR Delica Trainer Endura SS is a fully stainless The Endura changed the way Non-sharpened trainers teach It fills your palm with a handful ’s number one all-time Learning drills, actions/ alternative to the lightweight the world makes folding . the fundamental movements of steel yet doesn’t seem seller (and CLIPIT most found in reactions with an unsharpened Endura offering an all steel It introduced one-hand-open, of safe opening and closing weighty or unwieldy. people’s pockets) is without doubt blade allows the user safe and folder at nearly the same value- lightweight folders to the public. and deployment and retrieval the Delica. For cutting on the job, realistic practice without the price point. It retains its title as the first techniques with confidence, • AUS-6 hollow-ground at home or during recreational consequences of meeting a (and quite possibly the finest) eliminating the risk of blade activities, its size, weight and sharpened edge. lightweight one-hand open, cutting oneself. ergonomics combine making it • AUS-6 modified-skinning- • Modified skinning pattern style blade folder available. our most user-friendly folder. • Red FRN handle (designate • Clip attaches on both ends • David Boye dent • Red FRN handle (designate it non-sharpened) • VG-10 blade is flat it non-sharpened) for right-hand, tip-up or • VG-10 blade is flat • Steel clip carries right- down-carry • Volcano grip texturing on saber-ground • Volcano grip texturing on saber-ground both sides of the handle. handed tip-up or tip-down • Recommended for engraving • FRN handle textured with both sides of the handle. • Black FRN handle with • AUS-6 blade • Recommended for engraving Volcano Grip pattern or embellishment Volcano Grip texturing or embellishment • AUS-6 blade • Ambidextrous tip-up carry • Ambidextrous tip-up carry • Ambidextrous tip-up carry • David Boye dent • Ambidextrous tip-up carry

Model Closed Overall Blade Edge Blade Steel Weight Edge Types Model Closed Overall Blade Edge Blade Steel Weight Edge Types ENDURA SS C10 4-13/16˝ 122mm 8-1/2˝ 216mm 3-3/4˝ 96mm 3-1/4˝ 83mm AUS-6 5.5oz 156g PE, SE, CE DELICA SS C11 4˝ 102mm 7˝ 177mm 3˝ 77mm 2-11/16˝ 68mm AUS-6 4oz 114g PE, SE, CE ENDURA C10BK 4-15/16˝ 125mm 8-13/16˝ 223mm 3-15/16˝ 100mm 3-7/16˝ 87mm VG-10 3.0oz 86g PE, SE, CE DELICA C11BK 4˝ 102mm 7˝ 177mm 3˝ 77mm 2-11/16˝ 68mm VG-10 1.9oz 55g PE, SE, CE ENDURA TRAINER C10TR 4-15/16˝ 125mm 8-13/16˝ 223mm 3-15/16˝ 100mm N/A AUS-6 3.0oz 86g N/A DELICA TRAINER C11TR 4˝ 102mm 7˝ 177mm 3˝ 77mm N/A AUS-6 1.9oz 55g N/A C14 93mm Rescue C45 79mm Rescue C07 Police Model C08 Harpy For Save and Serve Professionals performance, Spyderco offers a smaller Rescue because Time and again law enforcement officers have The hawkbill blade originated in the marine/ ergonomics and comfort are key. Black version everyone’s hands are sized differently and opted for the Police Model since its debut in 1984. fishing industry where severing rope, line and is fully serrated to the tip. Blue version has occasionally we need a smaller blade. We pack as much blade length as possible into netting is done at arm’s length quickly and a PlainEdged tip for detailed cutting and wire Engineered and design from the base up to the handle for large cutting power in a slim profile. efficiently. The curving arc holds what you’re stripping. achieve the utmost level of ergonomic comfort cutting against the sharpened edge, stopping it and performance. from slipping off the tip. • David Boye dent • VG-10 Sheepfoot blade is flat, • Hollow-ground VG-10 blade, thick at tip for saber-ground • VG-10 Sheepfoot blade is flat, saber-ground • David Boye dent strength • David Boye dent • David Boye dent • Drying vent in handle • Weight-reducing spine swedge • 14mm Spyderco Round Hole • 14mm Spyderco Round Hole • Steel clip carries tip-down • Stainless handle suitable for engraving or • FRN Volcano Grip handle in black or blue • FRN Volcano Grip handle in black or embossing • Ambidextrous, tip-up clip safety orange • Steel clip carries tip-down • Ambidextrous, tip-up clip

Model Closed Overall Blade Edge Blade Steel Weight Edge Types Model Closed Overall Blade Edge Blade Steel Weight Edge Types POLICE MODEL C07 5-5/16˝ 135mm 9-7/16˝ 240mm 4-1/8˝ 104mm 3-13/16˝ 97mm VG-10 5.6 oz 159 g PE, SE, CE RESCUE 93MM C14 4-5/8˝ 116mm 8-3/16˝ 209mm 3-5/8˝ 93mm 3-7/16˝ 86mm VG-10 2.6oz 75g SE, CE HARPY C08 3-7/8˝ 99mm 6-1/2˝ 165mm 2-3/4˝ 70mm 2-9/16˝ 65mm VG-10 3.75oz 106g SE RESCUE 79MM C45 4-1/8˝ 104mm 7-1/8˝ 183mm 3-1/8˝ 79mm 2-5/8˝ 67mm VG-10 2.25oz 64g SE C28BK Dragonfly C28 Dragonfly SS C29 Cricket SS People buy small knives Small, fully stainless and ready Thin is in. Knifemaker Chris C17 Catcherman T02 SpyderSaw assuming they’ll use them for for engraving or personalization. Reeve introduced the concept A lightweight folding filet is an advantage The SpyderSaw bites through wood, bone and small non-demanding cutting Ergonomic handle and spine of creating a LinerLock’s liner when hauling gear to a favorite fishing spot. fibrous materials. Ideal for campers, paddlers jobs. By adding a forefinger cusp make gripping both out of the back scale of the Features a thinly-ground, edge retentive blade (strainers), hunters, and yard chores, we choil and spine thumb-rest we comfortable and fatigue-free. handle. This shaves away with the right amount of flex for filleting and incorporated into a folding saw our top-selling create large knife ergonomics in thickness and bulk, while de-boning. 75% PlainEdged with 25% serrations knife features: One-hand opening, premium steel a small package. • ATS-55 leaf-shaped blade assertively locking with fewer at the base for cutting fibrous fish material, skin, and a pocket clip. is flat-ground moving parts. Reverse “S˝ cartilage and bone. • Leaf-shaped, flat-ground blade curves to a precision tip • Spine cusp positions the for intricate/detailed cutting. • AUS-6 sawblade AUS-8 blade index finger or thumb • MBS-26 flat-ground blade • Edge: Off-set dual level serrations • 11mm Spyderco Round Hole • Three-screw metal pocket • VG-10 hollow-ground blade • Volcano Grip FRN handle • David Boye dent • David Boye dent clip • Right-handed tip-down • Integral tip-up pocket clip • FRN Volcano Grip handle • FRN Volcano Grip handle • David Boye dent • David Boye dent • Suitable as a money clip/ • Integral tip-up FRN pocket clip • Integral tip-up pocket clip • Tip-up carry tie-tack or for engraving • Recommended for engraving or embellishment Model Closed Overall Blade Edge Blade Steel Weight Edge Types Model Closed Overall Blade Edge Blade Steel Weight Edge Types CATCHERMAN C17 5-15/16˝ 151mm 10-7/16˝ 265mm 4-3/4˝ 121mm 4-5/16˝ 110mm MBS-26 2.5oz 71g CE DRAGONFLY C28BK 3-7/32˝ 82mm 5-7/16˝ 138mm 2-5/16˝ 58mm 1-7/8˝ 48mm AUS-8 1.2oz 33g PE, SE SPYDERSAW T02 5-15/16˝ 151mm 10-7/16˝ 265mm 4-7/8˝ 124mm 4-11/16˝ 119mm AUS-6 2.98oz 84.5g SAW DRAGONFLY C28 3-7/32˝ 82mm 5-7/16˝ 138mm 2-5/16˝ 58mm 1-7/8˝ 48mm ATS-55 2.6oz 73g PE, SE CRICKET C29 2-3/4˝ 70mm 4-9/16˝ 116mm 1-7/8˝ 47.5mm 1-3/4˝ 44mm VG-10 1.75oz 49.5g PE, SE C36GE Military Model C81 Para-Military C41 Native SS C41BK Native C78 Native III Save and Serve Pros require hard-use tactical When introduced, Military Model critics claimed Equally ergonomic as the Engineered for the human hand, Spyderco’s designers like to folders, ensuring top performance in the field. it too large and more knife than the average user lightweight Native. The the Native maximizes cutting turn out the lights and design in Steel is the spirit of the knife so CPM-S30V needed. Likewise, fans heralded the knife’s big stainless handle is smoothly while minimizing discomfort the dark, meaning function and (nearly 2% carbon) seemed the logical choice for attributes and performance. So, “How do we chamfered along its edges with and fatigue. Two distinct finger comfort outweigh eye-candy the Military given its reputation for edge retention satisfy both worlds, creating a mid-sized knife double-choil position points choils: One positions the index every time. Dips, valleys and and rust resistance. Spacers run the handle’s that cuts and performs like a larger knife?˝ Our lessening fatigue and discomfort finger behind the blade for expansions on the handle keep length exposing inside components for inspection answer, the Para-Military which is 2/3 the size of during long-term cutting. control, the second situates the the hand firmly positioned. and cleaning. Handle flares at the front and butt the original Military. hand farther back on the handle end stop slipping while aggressively cutting or sawing. • AUS-10 hollow-ground blade for added dexterity. • VG-10 hollow-ground blade • CPM-S30V modified clip-point blade • CPM-S30V modified clip-point blade • Weight reducing spine • David Boye dent • 14mm Spyderco Round Hole • 14mm Spyderco Round Hole swedge and spine texturing • CPM-S30V hollow-ground ® blade • Bi-Directional Textured • Spine texturing for thumb purchase • Spine texturing for thumb purchase • Ambidextrous tip-up carry FRN handle • David Boye dent • G-10 handle scales • G-10 handle scales • Recommended for engraving • Weight reducing spine ® ® ® or embellishment • Bi-Directional Textured swedge and spine texturing • Nested Walker LinerLock • Nested Compression Lock FRN handle • Right-hand tip-down black steel clip • Right-hand tip-down black steel clip • Ambidextrous black wire • Ambidextrous black steel clip carries tip-up • Made in Golden, Colorado • Made in Golden, Colorado clip carries tip-up • Available with a black-coated blade • Available with a black-coated blade • Made in Golden, Colorado

Model Closed Overall Blade Edge Blade Steel Weight Edge Types Model Closed Overall Blade Edge Blade Steel Weight Edge Types MILITARY MODEL C36 5-1/2˝ 139mm 9-1/2˝ 242mm 4˝ 102mm 3-11/16˝ 94mm CPM-S30V 4.2oz 120g PE, SE, CE NATIVE SS C41 3-15/16˝ 100mm 7˝ 178mm 3-1/8˝ 80mm 2-5/8˝ 66mm AUS-10 4.6oz 131g CE MILITARY MODEL C36BK 5-1/2˝ 139mm 9-1/2˝ 242mm 4˝ 102mm 3-11/16˝ 94mm CPM-S30V 4.2oz 120g PE, CE NATIVE C41BK 3-15/16˝ 100mm 7˝ 178mm 3-1/8˝ 80mm 2-5/8˝ 66mm CPM-S30V 2.65oz 75.2g PE, CE PARA-MILITARY C81 / C81BK 4-3/4˝ 121mm 7-7/8˝ 200mm 3-3/32˝ 81mm 2-15/16˝ 74mm CPM-S30V 3.75oz 108g PE, SE NATIVE III C78 4˝ 101mm 7-1/16˝ 179mm 3-1/8˝ 80mm 2-5/8˝ 66mm VG-10 2.8oz 81g PE, CE C63 James A. Keating Chinook II C95 Manix C66 Centofante3 Master At Arms, James A. Dual skeletonized liners in Frank Centofante is a respected Keating is known for his Filipino the G-10 handle add strength knifemaker and former C70TI A.T.R. (At The Ready) C70SS A.T.R. Stainless Handle martial arts style and his tactical without additional weight. Thumb President of the Knifemaker’s The A.T.R. was voted ‘Knife of The Year - 2003’ by Matching features as the titanium-handled A.T.R. equipment/training company serrations above the hole for Guild. The Centofante3 has two Knives Illustrated magazine. Holes in the handle but with a price-point reducing stainless handle. Combat Tech. Locking system aggressive gripping. Outstanding grip channels and an inlayed lessen weight, doubling as indexing divots for is rated for hard-use cutting, ergos and smooth open/close result palladium silver Spyderco bug rotation to different grip positions. A finger choil • VG-10 hollow-ground blade has an passing or blocking and is from the relationship between the in the handle. Back-lock is and pinky shelf assure positive grip on the folder unsharpened swedge suitable for camping, hunting blade’s weight, the lock’s shape and positioned midway on the spine in any draw. Cobra Hood positions the thumb for rapid (by feel) deployment and makes a textured • Stainless steel handle and field use. the lock spring’s strength. for security and convenience. TM control seat for the thumb while cutting. Heavy- • Cobra Hood duty rated Compression Lock is integrated. • Ambidextrous tip-up carry • CPM-S30V modified Bowie • CPM-S30V blade is double • VG-10 hollow-ground blade blade is hollow-ground flat-ground • David Boye dent • CPM-S30V hollow-ground blade has an • G-10 handle with dual steel • G-10 handle with dual steel • FRN handle unsharpened swedge liners liners • Weight reducing spine • 6AL4V Titanium handle • Ambidextrous tip-up or • Ambidextrous tip-up or swedge and spine texturing TM tip-down carry tip-down carry • Cobra Hood • Right-hand black steel • Ambidextrous tip-up carry • Made in Golden, Colorado • Made in Golden, Colorado clip carries tip-up or down • Made in Golden, Colorado Model Closed Overall Blade Edge Blade Steel Weight Edge Types Model Closed Overall Blade Edge Blade Steel Weight Edge Types CHINOOK II C63 4-7/8˝ 123mm 8-5/8˝ 218mm 3-3/4˝ 95mm 3-3/8˝ 85mm CPM-S30V 6oz 169g PE, CE A.T.R. C70TI 5-1/8˝ 130mm 8-7/16˝ 213mm 3-7/16˝ 87mm 3-1/4˝ 82mm CPM-S30V 4.75oz 135g PE, SE MANIX C95 5-1/16˝ 129mm 8-3/4˝ 222mm 3-3/4˝ 95mm 3-1/4˝ 83mm CPM-S30V 6.125 oz 175g PE, CE A.T.R. C70SS 5-1/8˝ 130mm 8-7/16˝ 213mm 3-7/16˝ 87mm 3-1/4˝ 82mm VG-10 5.375oz 150g PE, SE CENTOFANTE3 C66 4-1/2˝ 115m 7˝ 178mm 3-1/8˝ 79mm 3˝ 77mm VG-10 2.5oz 71g PE C73GPS Impala C75 Kiwi C83 Schempp Persian Folder South African knifemaker Ed The Kiwi unites Grandfather’s Ed Schempp is a wheat farmer, C79 Assist C82 D’Allara Rescue Scott both hunts and crafts favorite whittler with Spyderco skillful metallurgist and custom Named for its job function - to Assist. NYPD officer John D’Allara was a life-long custom knives for professional high-tech materials. Hole is maker whose Persian Folder SpyderEdged blade cuts fibrous material with Spyderco collector who perished in the 9/11 hunters. We tested this one positioned for comfortable blends Classic Western with a PlainEdge tip for detailed cutting. Wavy World Trade Center attack. Named in his honor, on a Muley taken one cold pivotal opening rotation. Dual Exotic East. Deep-bellied, pattern on the spine and handle let you position our full-sized Rescue (no pointed tip) is ground morning near our Golden finger choils deposit the fore- the blade ends in an upswept rope between the half-open blade and handle, thick and evenly from heel to tip. Textured handle facility and found the double and middle fingers in alignment tip with its curves continuing scissoring shut, safely severing cord without has inlayed dual steel liners. beveled gut hook (sharpened optimizing control. through to the handle. Top-notch fully opening/exposing blade. Built in survival on both sides of the inside radius) fit and finish. whistle. Assist I has a patented blunt-tipped. • VG-10 hollow-ground Sheepfoot blade unzips quickly. Unsharpened C75SS Stainless Kiwi When closed, squeezing the blade into the handle exposes a replacable glass-breaking carbide tip. • 14mm Spyderco Round Hole serrations above the hook offer Same ergonomic features as the • VG-10 hollow-ground blade TM slip resistance for the index finger. jigged bone Kiwi but with a fully Assist II has flat-ground Wharncliffe blade without • Ball Bearing Lock stainless, engraving-ready handle. • Micarta handle with the carbide glass-breaking feature. • Spine texturing for thumb purchase brushed steel bolsters • VG-10 hollow-ground blade • FRN Bi-Directionally Textured, • Spine texturing for added ® • VG-10 Wharncliffe blade • VG-10 hollow-ground blade three-dimensional handle • Nested Walker LinerLock purchase • C75- Stainless handle with • David Boye dent • Ambidextrous, tip-up wire clip • Black G-10 handle • Right hand tip-up carry jigged-bone inlay C75SS • Bi-Directional TexturedTM 3-D FRN handle • Nested low profile clip Stainless steel handle carries right-hand tip-down • Cobra Hood • Clipless • Ambidextrous tip-up wire clip

Model Closed Overall Blade Edge Blade Steel Weight Edge Types Model Closed Overall Blade Edge Blade Steel Weight Edge Types IMPALA C73 5˝ 128mm 8-3/4˝ 221mm 3-3/4˝ 94mm 3-1/4˝ 82mm VG-10 3.9oz 109g CE ASSIST I C79 4-7/8˝ 124mm 8-3/8˝ 213mm 3-11/16˝ 94mm 3-3/16˝ 81mm VG-10 4oz 115g CE KIWI C75 / C75SS 3-3/16˝ 81mm 5-7/16˝ 138mm 2-3/8˝ 60mm 1-7/8˝ 47mm VG-10 1.75oz 50g/1.67oz 47g PE ASSIST II C79 4-7/8˝ 124mm 8-3/8˝ 213mm 3-11/16˝ 94mm 3-3/8˝ 86mm VG-10 3.9oz 111g CE SCHEMPP C83 4-3/4˝ 121mm 8-1/4˝ 209mm 3-1/2˝ 88mm 3˝ 77mm VG-10 5.375oz 154g PE D’ALLARA C82 4-15/16˝ 125mm 7-7/8˝ 200mm 3-1/2˝ 88mm 3-3/16˝ 81mm VG-10 5.75oz 164g SE C80 Dodo C84 Warren Thomas C85 Yojimbo The Dodo is a little big knife The Karambit’s claw-shape Designer Michael Janichs’ designed to carry small and originated in Indonesia for triangular-shaped blade holds C87 Scorpius C90 Stretch C92 Kopa cut large. 2˝ blade is legal and harvesting and for personal the sharpened edge in contact “Form follows function- not To stretch is the act of extending The first two installments in an socially acceptable in most protection. Knifemaker Warren with what you’re cutting, while the looks” is the design philosophy or drawing out beyond normal ongoing series of gent’s folders municipalities. Its curved belly Thomas’ bio-engineered design fine tip generates less resistance of Eric Glesser’s urban tactical limits. The Stretch’s usability featuring stainless handles excels at heavy cutting and its is stainless with an arcing blade, when initiating piercing cuts. the Scorpius. Sized expands to hunting, outdoor inlaid with Cocobolo wood or downward-pointed tip is for fine/ curving handle and ring for Palm-fitting handle heightens for city carry, its wavy handle activities or as an everyday carry Micarta. New handle material detailed slicing. Multi-positional swinging to different grip positions. dexterity/control, the tapered tail positions both index and piece. Handle is inlayed on both inlays are planned for regular finger choils. doubles as a pressure point or middle fingers to stop forward/ sides with Kraton. The small steel release throughout 2005, visit backward slipping. Tapered tail dot inset into the Kraton makes www.spyderco.com for updates. • VG-10 double flat-ground striking tool. Indexing holes on makes an effective impact and a seat for the clip’s contact point Quantities limited to 600 pieces • CPM-S30V hollow-ground blade clip and handle. non-lethal control tool. and offers a place to engrave a per run. blade • 13mm Spyderco Round Hole name or initials. • Ball Bearing LockTM • CPM-S30V modified • Style Integral Wharncliffe flat-ground blade • VG-10 hollow-ground blade • VG-10 flat-ground blade • G-10 handle in blue or black LinerLock • Nested Compression Lock • Stainless steel handle • VG-10 flat-ground blade • Righthand tip-down carry • Ambidextrous tip-up wire clip • Right -or left-hand, tip-up • G-10 handle in blue or black • 14mm Spyderco Round Hole • David Boye dent • Spine cusp for added • Made in Golden, Colorado or carry • Ambidextrous, tip-up carry • Right-handed, tip-up or • Steel pocket clip carries purchase tip-down carry ambidextrously, tip-up or • Made in Golden, Colorado tip-down Model Closed Overall Blade Edge Blade Steel Weight Edge Types Model Closed Overall Blade Edge Blade Steel Weight Edge Types DODO C80 4-3/8˝ 112mm 6-1/8˝ 156mm 2-1/6˝ 53mm 1-3/4˝ 44mm CPMS30V 2.6oz 74g PE, SE SCORPIUS C87 4-3/8˝ 111mm 7-15/16˝ 186mm 3˝ 76mm 2-1/2˝ 64mm VG-10 4.3oz 122g PE, SE KARAMBIT C84 5-1/32˝ 128mm 5-5/8˝ 143mm 2-1/8˝ 54mm 1-13/16˝ 46mm VG-10 5oz 145g PE STRETCH C90 4-9/32˝ 109mm 7-13/16˝ 198mm 3-1/2˝ 89mm 3-1/8˝ 79mm VG-10 4.5oz 128g PE, CE YOJIMBO C85 5˝ 127mm 7-13/16˝ 199mm 2-7/8˝ 73mm 2-11/16˝ 69mm CPMS30V 3.6oz 102g PE KOPA C92 3-7/16˝ 87mm 5-3/16˝ 148mm 2-7/16˝ 62mm 1-15/16˝ 49mm VG-10 2.5 oz 70g PE LBK/LFG Ladybug JBK/JFG Jester JSS Jester Small enough to fit unnoticeably Take the Jester Test: Carry one Our smallest all-steel folder on a keychain, in a purse or for 14 days and on day 15 leave offers remarkable ergonomic the bottom of a pocket. Bites it home. Notched spine and tip control and cutting ability in a C88 Salt I / C91 Pacific Salt C89 Atlantic Salt easily through 1/2 thick rope. for non-slip control. Available in keychain-sized tool. A myth in the knife world is that somewhere there exists steel with Preferred by seafarers, rescue Available in black or forest green. black or forest green. high-performance cutting abilities that cannot rust. Myth is now workers, EMTs and ranchers. Ladybug/Photon Combo Jester/Photon Combo • AUS-6 hollow-ground blade reality with new H1 steel. A precipitation-hardened alloy with .1% Atlantic Salt is a rust-free option Ever find yourself needing a knife Jester/Photon II set has a nitrogen, it reacts like carbon in the steel matrix but doesn’t react for cutting in an urgent situation. and a small light or torch? The textured spine and tip for added • Recommended for to chlorine, making rust. Edge retention is comparable to premium Ladybug and Photon II attach control. Three rings connect engraving or embellishment knife steels but remains rust free even for those challenged by • H1 hollow-ground together via three small rings the knife and flashlight, carrying • Clipless cleaning their knives. Lock bar, pins and clip are also impervious to sheep-foot blade that spread out for flat carry in a flat and bulge-free in a pocket or rust and pitting. Lanyard hole offers backup cord/thong attachment pocket or purse. Photon emits purse. Available forest green only. for water use. • 14mm Spyderco Round Hole 6500 Kelvin of light with a 100+ • Black or yellow FRN hour Lithium battery. Available • AUS-6 hollow-ground blade Volcano Grip handle forest green only. • H1 hollow-ground blade with slightly rounded tip • FRN handle with Volcano • 14mm Spyderco Round Hole • David Boye dent Grip in forest green • AUS-6 hollow-ground blade • Black or yellow FRN Volcano Grip handle • Ambidextrous, tip-up • Clipless carry • FRN handle with Volcano • David Boye dent Grip • Ambidextrous, tip-up carry • Clipless

Model Closed Overall Blade Edge Blade Steel Weight Edge Types Model Closed Overall Blade Edge Blade Steel Weight Edge Types SALT I C88 4˝ 102mm 7˝ 177mm 3˝ 76mm 2-11/16˝ 68mm H-1 2.0oz 57g PE, SE LADYBUG LBK/LFG 2-1/2˝ 64mm 4-15/16˝ 168mm 1-15/16˝ 49mm 1-3/4˝ 44mm AUS-6 0.5oz 16g PE, SE PACIFIC SALT C91 4-15/16˝ 125mm 8-5/8˝ 219mm 3-13/16˝ 97mm 3-3/8˝ 86mm H-1 3.0oz 86g PE, SE JESTER JBK/JFG 2-1/2˝ 64mm 4-15/16˝ 168mm 1-15/16˝ 49mm 1-3/4˝ 44mm AUS-6 0.5oz 16g PE, SE ATLANTIC SALT C89 4-5/8˝ 116mm 8-3/16˝ 209mm 3-5/8˝ 93mm 3-7/16˝ 86mm H-1 2.6oz 75g PE, SE JESTER JSS 2-1/2˝ 64mm 4-15/16˝ 168mm 1-15/16˝ 49mm 1-3/4˝ 44mm AUS-6 1.4oz 38g PE, SE B01 SpyderFly B03 SzaboFly FB01 & FB02 Bill Moran FB12 Vagabond The spyder ate the fly. The SpyderFly infuses Knifemaker, martial artist, adventurer and Bill Moran is the grandfather of American For the wanderer, backpacker, camper or traditional Balisong elements with innovative businessman, Laci Szabo is the creator of the knifemaking and the founder of the American picnicker. The Vagabond has an integral, unique Spyderco features. Pinch-free chamfered cast SzaboFly. Spyderco Round Holes enhance Society. His knife is available in two plastic sheath that pivots out/upward, snapping- steel handles. Spring loaded latch locks closed retention and control while rotating/swinging the styles: The FB01 has an upswept Bowie blade, over, and safely covering, the cutting edge. The for safe carry, but does not lock open. Spyderco blade. Asian inspired, the handle curves, fitting the the FB02 a drop-point blade. Blades taper to a cover then folds back into the handle. Round Holes allow for controlled, smooth swinging. hand and the blade curves, fitting into the handle. fine, uniformly ground tip.

• AUS-6 flat-ground blade • VG-10 hollow-ground blade has an • VG-10 hollow-ground blade has an • VG-10 flat-ground blades (Bowie-shape or • Bi-Directional TexturedTM FRN handle unsharpened swedge unsharpened swedge Drop-point) • Lanyard hole • grind creates equal weight/ • Dagger grind creates equal weight/ • FRN handle inlayed with Kraton panels balance on both sides of the blade balance on both sides of the blade • Kydex sheath with multi-position Tek-Lok® • Wire clip attaches to either handle, either • Wire clip attaches to either side for a fastener side for a variety of carrying positions variety of carrying positions

Model Closed Overall Blade Edge Blade Steel Weight Edge Types Model Closed Overall Blade Edge Blade Steel Weight Edge Types SPYDERFLY B01 6˝ 152mm 9-3/4˝ 248mm 4-1/8˝ 105mm 3-11/16˝ 94mm 440C 6.562oz 167g PE BILL MORAN FB01 N/A 8˝ 203mm 3-7/8˝ 99mm 3-1/2˝ 89mm VG-10 3oz 84g PE SZABOFLY B03 5-1/2˝ 140mm 9-7/8˝ 251mm 4-1/4˝108mm 3-1/2˝ 89mm VG-10 5.5oz 156g PE BILL MORAN FB02 N/A 8-1/16 ˝ 205mm 3-7/8˝ 99mm 3-3/8˝ 86mm VG-10 3oz 84g PE VAGABOND FB12 N/A 7-7/8˝ 200mm 3-1/8˝ 79mm 2-7/8˝ 73mm AUS-6 2.8oz 79g PE K04 Utility Knife K05 Small Utility Knife K08 K09 Mini Paring Knife Carries the highest MBS-26 steel offers Japanese style A excels customer satisfaction exceptional edge butcher’s knife has a at detailed cutting rating with exceptional retention, sharpness subtle curve for rocking because its handle FB05 Temperance Fixed Blade FB05TR Temperance Trainer cutting performance and cutting performance. cuts. Vertical finger is larger than its Blueprinted for demanding outdoor camp/ Designed simultaneously with the live and edge retention. Two-step serration guard stops the hand sharpened edge. field/utility use and effective for food prep too. Temperance incorporating identical features but Designed for cutting pattern allows the from slipping forward Same premise here for Textured spine cusp and finger choil position with a round-tipped non-sharpened blade. boards, the thin blade sharpened cusps to toward the cutting edge. slicing, pitting, peeling the hand for advantageous control. Flattened is semi-flexible passing initiate penetration and paring foods. pommel generates a thumb-leveraging shelf in • AUS-6 non-sharpened flat-ground blade easily through foods. while keen inside • MBS-26 flat-ground backward or reverse grip. • Red FRN handle (designate it non-sharpened) curves follow through. blade • MBS-26 flat-ground • Indexing divots • MBS-26 spear-point, • Black Sermollan® (from heel to tip) • VG-10 spear-point double flat-ground blade flat-ground blade • MBS-26 spear-point, blade • Lanyard hole multi-stepped handle • FRN textured handle ® flat-ground blade ® ® ® • Black Sermollan • Handwash • Black Sermollan • Indexing divots • Boltaron sheath with 5-position Tek-Lok multi-stepped handle • Black or red multi-stepped handle fastener recommended • Lanyard hole • Handwash Sermollan® multi- • Handwash • Boltaron® sheath with 5-position Tek-Lok® recommended stepped handle recommended fastener • Handwash recommended Model Closed Overall Blade Edge Blade Steel Weight Edge Types Model Overall Blade Blade Steel Weight Edge Types TEMPERANCE FB05 N/A 9-5/8˝ 243mm 4-7/16˝ 113mm 4-1/8˝ 104mm VG-10 5.375oz 152g PE, SE UTILITY KNIFE K04 10-7/8˝ 275mm 6-1/2˝ 162mm MBS-26 2oz 57g SE TEMPERANCE TRAINER FB05TR N/A 9-1/2˝ 240mm 4-5/16˝ 109mm N/A AUS-6 5.2oz 146g N/A SMALL UTILITY KNIFE K05 8-7/8˝ 225mm 4-1/2˝ 116mm MBS-26 1.5oz 43g SE SANTOKU K08 12-1/8˝ 307mm 6-7/8˝ 174mm MBS-26 5oz 140g PE PARING KNIFE K09 5-1/2˝ 140mm 2˝ 51mm MBS-26 0.7oz 20g PE 302M & 302F 303 Pocket Stones 400F Ceramic Files 701 Profile Benchstones Small rectangular Jewelers, gunsmith and Portable elliptical- 204MF Tri-Angle Sharpmaker 204UF Ultrafine Our benchstones stones are portable dental professionals shaped stones offer “A sharp knife is safer than a dull one.˝ The 204MF includes two Triangle Stone effectively hone for honing little items. all use small fine-grit four sharpening sets of high alumina ceramic stones: Pair of medium-grit (brown) Ultrafine stones provide wide tools: plane Sold separately sharpening stones to surfaces: Flat stones for aggressive sharpening and a pair of fine (white) stones professional finishing, tightening irons, chisels, large in medium or fine debur hardened molds, surface and a large for professional grade finishing. Triangular shape sharpens the steel’s scratch pattern to blades, woodworking grits. Leather pouch. even carbide. Set of radius for PlainEdges, PlainEdges (flat sides) and SpyderEdges (corners). A channel an even keener degree for equipment, even ski Autoclave safe, clean four in a suede pouch a small radius for on each stone sharpens pointed items like fishhooks, darts and hair-popping sharpness and edges. Sold separately with a plastic scouring includes: Round, SpyderEdges and a awls. Brass safety rods protect the user’s hands. Components polishing. Sold individually. in: fine, medium pad and powdered square, triangular, and groove for sharpening store inside the ABS plastic base and lid. Pre-set sharpening or ultra-fine grits. cleanser. slip-shaped stones. pointed items. Fine grit angle of 30° (15° each side) or 40° (20° each side) for knives and 204D Diamond Triangles Packaged in a polymer Or sold individually in (white) or medium grit a 12.5° scissor setting. Underside of the base accepts two stones Steel triangles are coated case with non-skid 303MF Double Stuff plastic tubes. Clean (brown). Sold separately side-by-side for use as a benchstone. Use dry without oil, water or in a bonding agent then rubber feet for tabletop 303F and 303M with a plastic scouring or as a pair. Suede lubricants. To clean: scrub stones with a plastic scouring pad and covered in diamond particles. use. Use dry without bonded back to back. pad and powdered storage pouch. powered cleanser. Autoclave safe. Includes instruction book and Recommended for removing lubricants or oils. To Leather pouch included. cleanser. Autoclave safe. video (VHS, PAL or SECAM). stock, restoration and clean: scrub with Autoclave safe. aggressively re-shaping, plastic scouring pad re-beveling and re-profiling. and powered cleanser. Sold as a pair. Autoclave safe. • User Forums • User • Edge-U-Cation Information • Technical Closeouts and • Specials &Announcements • News &Photos Releases • Press Collection Spyderco Complete • The you. we’d from us hear to love contact seeking, are you information the locate cannot you if and Take around alook performance. their and products Spyderco about opinions and impressions time, real in discuss, to ready community forum active an with along here are answers The my area? in dealer closest the is Where Hole? Round Spyderco the Why Model? Police the of length edge cutting know to like you Would usage. and needs your to suited best knife the selecting in you aid to information product of library a vast provides website official Spyderco’s tool. apotent is Information Spyderco.com. at online us Visit cotton. M - L - XL - XXL -XXL M-LXL cotton. pre-washed 100% image. silk-screen Four-color tees. Knives˝ Have “All Critters God’s SpyderShirts clasp. One size fits all. fits size One clasp. sliding adjustable with cotton 100% brushed black is cap The lid. your for SpyderGear SpyderHat absorption. One size fits all. fits size One absorption. perspiration and comfort for headband adjustable padded with cotton 100% brushed black is visor ended Open SpyderVisor

Steel Carbon Chromium Cobalt Copper Manganese Molybdenum Nickel Nitrogen Phosphorus Silicon Sulfur Tungsten Vanadium H-1 0.15 14.00-16.00 -- -- 2.00 .50-1.50 6.00-8.00 0.10 0.04 3.00-4.50 0.03 -- -- O-1 0.85-1.00 0.40-0.60 -- -- 1.00-1.40 -- 0.30 -- -- 0.50 -- -- 0.30 W-1 0.70-1.50 0.15 -- -- 0.10-0.40 0.10 0.20 -- -- 0.10-0.40 -- 0.50 0.10 A-2 0.95-1.05 4.75-5.50 -- -- 1.00 0.90-1.40 0.30 -- -- 0.50 -- -- 0.15-0.50 D-2 1.40-1.60 11.00-13.00 -- -- 0.60 0.70-1.20 0.30 -- -- 0.60 -- -- 1.10 M-2 0.95-1.05 3.75-4.50 -- -- 0.15-0.40 4.75-6.50 0.30 -- -- 0.20-0.45 -- 5.00-6.75 2.25-2.75 W-2 0.85-1.50 0.15 -- -- 0.10-0.40 0.10 0.20 -- -- 0.10-0.40 -- 0.15 0.15-0.35 1095 0.90-1.03 ------0.30-0.50 ------0.04 -- 0.05 -- -- 20-CV 1.90 20.00 -- -- 0.30 1.00 ------0.30 -- 0.60 4.00 5160 0.56-0.64 0.70-0.90 -- -- 0.75-1.00 ------0.035 0.15-0.30 ------52100 0.98-1.10 1.30-1.60 -- -- 0.25-0.45 ------0.025 0.15-0.30 0.025 -- -- 420J2 0.15 12.00-14.00 -- -- 1.00 ------0.04 1.00 0.03 -- -- 425 Modified 0.40-0.54 13.50-15.00 ---- 0.50 0.60-1.00 -- -- 0.035 0.80 0.03 -- 0.10 440A 0.65-0.75 16.00-18.00 -- -- 1.00 0.75 -- -- 0.04 1.00 0.03 -- -- 440B 0.75-0.95 16.00-18.00 -- -- 1.00 0.75 -- -- 0.04 1.00 0.03 -- -- 440C 0.95-1.20 16.00-18.00 -- -- 1.00 0.75 -- -- 0.04 1.00 0.03 -- -- 440XH 1.60 16.00 -- -- 0.50 0.80 0.35 -- -- 0.40 -- -- 0.45 AUS-6 0.55-0.65 13.00-14.50 -- -- 1.00 -- 0.49 -- 0.04 1.00 0.03 -- 0.10-0.25 AUS-8 0.70-0.75 13.00-14.50 -- -- 0.50 0.10-0.30 0.49 -- 0.04 1.00 0.03 -- 0.10-0.26 AUS-10 0.95-1.10 13.00-14.50 ---- 0.50 0.10-0.31 0.49 -- 0.04 1.00 0.03 -- 0.10-0.27 GIN-1 0.90 15.50 -- -- 0.60 0.30 -- -- 0.02 0.37 0.03 -- -- ATS-34 1.05 14.00 -- -- 0.40 4.00 -- -- 0.03 0.35 0.02 -- -- 154CM 1.05 14.00 -- -- 0.50 4.00 ------0.30 ------ATS-55 1.00 14.00 0.40 0.20 0.50 0.60 ------0.40 ------VG-10 0.95-1.05 14.50-15.50 1.30-1.50 -- 0.50 0.90-1.20 -- -- 0.03 0.60 -- -- 0.10-0.30 BG-42 1.15 14.50 -- -- 0.50 4.00 ------0.30 -- -- 1.20 MBS-26 0.85-1.00 13.00-15.00 ---- 0.30-0.60 0.15-0.25 -- -- 0.04 0.65 0.01 -- -- MRS-30 1.12 14.00 -- -- 0.50 0.60 ------1.00 -- -- 0.25 CPM-S30V 1.45 14.00 ------2.00 -- 0.20 ------4.00 CPM-S60V 2.15 17.00 -- -- 0.40 0.40 ------0.40 -- -- 5.50 CPM-S90V 2.30 14.00 ------1.00 ------9.00 CPM-10V 2.45 5.25 -- -- 0.50 1.30 ------0.90 0.07 -- 9.75 CPM-3V 0.80 7.50 ------1.30 ------2.75 Hitachi Blue Super 1.40-1.50 Steel 0.30-0.50 -- -- 0.20-0.30 0.30-0.50 -- -- 0.025 0.10-0.20 0.004 2.00-2.50 0.50 Sandvik 12C27 0.60 13.50 -- -- 0.40 ------0.025 0.40 0.01 -- -- Sandvik 12C27 Mod. 0.52 14.50 -- -- 0.60 ------0.25 0.40 0.01 -- -- Vascowear 1.12 7.75 -- -- 0.30 1.60 ------1.20 -- 1.10 2.40 X-15TN 0.42 15.55 -- -- 0.46 1.70 0.30 0.21 0.017 0.23 0.002 -- 0.29 ZDP-189 3.00 20.00 ------Carbon (C) because it improves edge retention and enhances • Increases edge retention and raises tensile strength. blade finish). • Increases hardness and improves resistance to wear The steel is then quenched6 to achieve its maximum and abrasion. level of hardness7. At this point the steel is too hard and brittle for practical use and thus tempering8 is Chromium (CR) important in bringing the steel to its ideal harness level • Increases hardness, tensile strength, and toughness. (different knife steels perform best at different levels of • Provides resistance to wear and corrosion. hardness). Tempering also increases wear resistance Cobalt (CO) and toughness9 properties. When tempering, it is • Increases strength and hardness, and permits important to understand the interaction between quenching in higher temperatures. hardness and toughness. An increase in hardness is • Intensifies the individual effects of other elements in usually accompanied by an increase in yield strength10 more complex steels. and tensile strength11 and a decrease in impact WTC KNIFE Copper (CU) strength12 and ductility13. An increase in toughness is Spyderco’s World Trade Center Fundraising Knife Project began on September 12, 2001 when Spyderco’s employees wanted to help • Increases corrosion resistance. accompanied by the opposite effect (i.e. an increase in toughness and ductility and a decrease in yield the surviving families of the fire and police personnel who Manganese (MN) strength and tensile strength). High impact knives perished on 9/11/2001. We found a commendable outlet for • Increases hardenability, wear resistance, and such as swords or benefit from a softer blade doing this in the New York Police and Fire Widow’s and Children’s tensile strength. (avoiding breakage) while low impact knives such Benefit Fund*. Unique manufacturing challenges were met by a number of • Deoxidizes and degasifies to remove oxygen from as may benefit from a harder blade (to same-feeling people both in and out of the knife industry. In honor of the lost molten metal. improve wear resistance). Once tempering is complete, members of the Saving And Serving community we designed a rescue model • In larger quantities, increases hardness and brittleness. the final hardness of the steel can be determined using variation with an inlayed silhouette of the Twin Towers skyline, cut from a steel Molybdenum (MO) a Rockwell Test14. girder retrieved from World Trade Center- Tower One. 2819 numbered pieces • Increases strength, hardness, hardenability, and were manufactured, one for every life lost in The World Trade Center. Packaged toughness. For additional detailed information on the above in a wooden presentation box. $225. Per knife. All profits go to the New York • Improves machinability and resistance to corrosion. processes and properties, we recommended the Police and Fire Widow’s and Children’s Benefit Fund. Nickel (NI) following references that were used to compile this information; Metallurgy Fundamentals by D.A. Brandt • Adds strength and toughness. We thank those who made this fundraiser a reality. (published by Goodheart-Willcox) and Heat Treater Lt. John McArdle – NYPD, Officer Jerome Kazlauskas – NYPD, Officer Jerome Nitrogen (N) Guide by P.M. Unterweiser (published by ASM). Maier – NYPD, Officer Juan Gonzalez - NYPD, Jeff Silman, Officer John • Used in place of carbon for the steel matrix. The D’Allara and Family New York – NYPD (perished in Tower Number 1), Judd Nitrogen atom will function in a similar manner to the 1. Alloy- a material that is dissolved in another metal in Evans - Evergreen, CO, Joe Rogers - Rogers Wire EDM Service, Arvada, CO carbon atom but offers unusual advantages in a solid solution; a material that results when two or Darrell Lewis - Bodycote, Greensboro, NC, The Spyderco Crew, Golden, CO. corrosion resistance. more elements combine in a solid solution. Phosphorus (P) *This charity is an IRS Section 501c(3) corporation. The charity has annual Certified Financial Statements from Grant Thornton CPA’s filed with 2. Heat Treating- heating and cooling metal to the New York State Department of State. The Tax ID number is 13-33440675. The charity has less than 2% expenses, does not use professional • Improves strength, machinability, and hardness. prescribed temperature and the limits for the fundraisers, and relies on active volunteer committee to raise funds. • Creates brittleness in high concentrations. purpose of changing the properties and behavior of Silicon (SI) the metal. WARRANTY BASIC KNIFE MAINTENANCE: • Increases strength. 3. Critical Temperature- the temperature at Spyderco knives are designed and built for use as Insure safe operation by regularly inspecting the which steel changes its structure to austenite in cutting tools. Use of our knives for any purpose knife’s interior for pocket lint and obstruction. • Deoxidizes and degasifies to remove oxygen from preparation for hardening. molten metal. 4. Austenetized- the basic steel structure state in other than cutting is considered abuse. As with Clean the well of the lock and inside the handle Sulfur (S) which an alloy is uniformly dissolved into iron. any usable tool, Spyderco knives can wear out. using a toothpick, hot water and a mild detergent. • Improves machinability when added in minute quantities. 5. Grain Size- the physical size of the austenite grains They may also fail to perform if not used or cared Rinse with fresh water, dry inside and out and Tungsten (W) during austenizing. Actual size can vary due to for properly. If your knife has been put to hard lubricate steel components with oil or silicone. • Adds strength, toughness, and improves hardenability. thermal, time and forging considerations. use for a long period of time, it is possible that Adding lubricants to the lock and pivot point will 6. Quenched- rapid cooling from the critical Vanadium (V) temperature using water, oil or other means. Spyderco will be unable to improve the condition ensure smooth action. A sharp knife makes • Increases strength, wear resistance, and 7. Hardness- resistance of a steel to deformation or of your knife. Please see Spyderco.com for cutting easier and safer and lengthens its increases toughness. penetration analogous to strength. complete repair and warranty information. usable life. We offer complimentary sharpening: 8. Tempering- reheating to a lower temperature after PlainEdge, SpyderEdge or CombinationEdge- you Steel, & How We Get It Where We Want It To Be. quenching for the purpose of slightly softening the WHERE TO SEND YOUR KNIFE: cover the cost of shipping. Knives do wear out Steel is a combination of iron and no more than 2% steel, precipitating carbides and relieving stress. When sending your knife in for Warranty or Repair- and if your edge is damaged beyond repair we will 9. Toughness- the ability of a material to resist shock carbon. Steel is alloyed with other elements that include a description of the problem and how it contact you, suggesting it be retired from use. combine, producing special properties. Once a or impact. 1 10. Yield Strength- the point at which a steel becomes occurred. Include name (and/or company name) particular alloy combination (or steel type) is selected, The following marks are recognized trademarks of Spyderco, Inc.: Advntr, Assist, A.T.R, Ball Bearing Lock, Bi-Directional Texturing, Black Hawk, Calypso, permanently deformed: the point at which the linear return address (no P.O. Boxes) daytime phone Calypso Jr., Catcherman, Chinook, Civilian, Clip-Kit, CLIPIT, Clutch-Lock, Cobra Hood, Compression Lock, CoPilot, Cricket, Delica, Delica II, Dodo, specific procedures are used to maximize the unique Double Stuff, Dragonfly, Dyad, Dyad Jr., Edge-U-Cation, Endura, Endura II, Evolution Edition, Executive, Galley “V˝, Gunting, Harpy, Hummingbird, qualities required for that steel to perform. Generally, relationship of stress to strain changes on a Stress/ number so we may contact you. We recommend Hunter, Impala, Jester, Kinetic Opening, Kiwi, LadyBug, LadyBug II, Lil’ Temperance, LBK, Mariner, Matriarch, MeerKat, Merlin, Military Model, Mini Dyad, Strain curve. Mini Mariner, Mini Probe, Native, Native II, Native III, Navigator, Ocelot, Para-Military, Pegasus, Persian Folder, Phantom Lock, PlainEdge, Police Model, the process for converting a steel alloy into premium shipping UPS or registered mail for tracking pur- Pre-Diver, Pride, Probe, Pro Culinaire, ProFile, Pro-Grip, Pro-Venator, “Q˝, Remote Release, Renegade, Rescue, Rescue Jr., Ronin, Rookie, Salsa, Salt 2 11. Tensile Strength- indicated by the force at which a I, Scorpius, SecureLock, SecurLok, Shabaria, Snap-It, Sprint Run, S.P.O.T., Solo, Speed Sleeves, SpringClip, SpringLock, Spur, SpyderCard, Spyderco knife steel is in the heat-treating . poses should your knife fail to arrive at our offices. Trademark Round Hole, SpyderEdge, SpyderFly, SpyderHawk, Spyderkey, SpydeRench, SpyderSaw, Standard, Starmate, Temperance, Trakk’r, Tri-Angle material breaks due to stretching. Sharpmaker, Vesuvius, Volcano Grip, Worker and Yojimbo. The following slogans are recognized trademarks of Spyderco, Inc.: “First We Made Things Heat-treating is the most important stage of the Sharp... Then We Made Sharp Things˝, “High Performance Matter Separators˝, “Integrity is Being Good Even if No One is Watching˝, “Quality is the Product 12. Impact Strength- the ability of a material to resist of a Good Attitude˝, and “Those Who Know Carry Spyderco˝. The following marks, designs and slogans are registered trademarks of Spyderco, Inc.: G. evolution of an alloy into a performance knife steel. Sakai, Native, Spyderco, Spyder Bug Design, Round Hole Design, and “All God’s Critters Have Knives˝. Spyderco, Inc. products are covered by one or Step one in the heat-treating process is reaching a cracking due to a sudden force. Spyderco, Inc. more of the following patents: 1,957,810, 728008, TMA502,771, 2,033,317, 669,496, TMA468,742, 262519, 2,032,472, 742,786, 2,169,685, 1,965,458, 3 13. Ductility- the tendency of a material to stretch or 669,495, TMA479,238, 472191, 2,032,465, 742,785, 2,003,071, 1,957,810, 2,239,296, 2,334,210, 2,171,620, 2,171,899, 2,250,477, 2,494,673 2,491,361, critical temperature . The temperature is held for Attn.: Warranty and Repair 2,550,975, 2,230,394, ,2,464,061, 64569, 64645, 92628, 102268, 171837, 999820, 2,661,729, DE49910779.9, 4,347,665, 4,640,058, 4,776,094, plastically deform appreciably before fracturing. 4,776,094, 5,379,492, 5,615,484, 5,628,117, 5,689,890, 5,704,129, 5,704,129, 5,884,467, 5,920,935 5,928,069, 5,964,036, 5,983,506, 6,205,667, a specific amount of time (depending on the steel 820 Spyderco Way, 6,725,545, 6,751,868, D418,383, D444,093, D333,081, D333,251, D337,253, D344,006, D349,837, D349,837, D353,988, D379,294, D381,060, D382,189, 14. Rockwell Test- a measurement of steel hardness D382,459, D386,664, D387,966, D388,150, D389,389, D389,718, D391,465, D401,129, D402,177, D402,178, D402,524, D403,567, D404,990, D406,038, being hardened) and causes the steel to become Golden, CO 80403 USA D411,431, D411,790, D419,336, D421,378, D422,052, D422,461, D422,871, D422,875, D425,391, D427,500, D429,138, D434,631, D435,420, D436,014, austenetized4. Heat treatment is one of the many based on the depth of penetration of a small D438,443, D441,827, D442,460, D461,387, D464,551, D468,985, D487,494. Other U.S. and foreign patents pending., Ball Chain, Cordura, CPM, Crucible, 800-525-7770 or 303-279-8383 Empire/Boltaron, Kevlar, KRATON, Kydex, Linerlock, Micarta, Para Cord, Tek-Lok, 440V and S30V are registered trademarks of their respective holders., factors determining the grain size5 of the steel (a fine diamond cone pressed into the steel under a Michael Walker is the inventor of the ball bearing detent that is used to keep the blade in a Linerlock closed. H. McBurnette and Al Mar are credited with the constant load. [email protected] positive front lock design. Copyright © 2003-2004. All rights reserved. All product names, art and text herein are the property of Spyderco, Inc. and may not grain structure is more desirable for knife blades be reproduced in part or whole without the sole written permission of Spyderco, Inc.

Catalog Printed in The USA