What's Burning in Your Campfire?

Total Page:16

File Type:pdf, Size:1020Kb

What's Burning in Your Campfire? Benzene, naphthalene, styrene, tol- and ash were: Figures 4, 5, and 6 compare the uene, and xylene are aromatic hydrocar- • A broken fiberglass spinning rod garbage items that released more than two bons, which are suspected carcinogens. • A combination of cigarette and candy times as much benzene, styrene, and Aromatic hydrocarbons also are severe wrappers xylene as wood. Benzene, styrene, and eye, nose, and throat irritants. These • Nickel-cadmium batteries xylene are common air pollutants pro- compounds occur in petroleum products • Alkaline and lithium batteries duced by burning plastic. and automobile exhaust. They also are found in dyes and are used to produce a number of organic compounds. Benzene Relative amount of benzene in smoke is a major component in tobacco smoke. 0 10 20 30 Naphthalene is an ingredient in moth- Wood balls. Toluene and xylene occur in petro- Plastic (No. 6) packaging leum products and in dyes. Styrene is Plastic (No. 1) packaging Styrofoam cups primarily used in the production of poly- Alkaline and lithium batteries styrene plastics and resins. Meal-Ready-to-Eat packaging Benzene Acrolein and acetaldehyde are alde- Nickel-cadmium batteries hydes. Aldehydes are used for making Peanut can with plastic lid dyes, resins, and plastics. Acrolein is Plastic bags toxic to aquatic organisms and acetal- Plastic grocery bags dehyde has been proven to cause cancer Aluminum pop can in animals. Studies have not proven Plastic (No. B2) plate whether these compounds cause cancer in humans. Figure 4—The amount of benzene—a suspected carcinogen—in a campfireʼs smoke increased, Furan is on the U.S. Environmental sometimes dramatically, when garbage items were added to the wood fire. Protection Agencyʼs list of extremely haz- ardous substances. Furan is released into the air during incomplete combustion. It Relative amount of styrene emits acrid smoke and irritating fumes. in smoke 0 40 80 120 160 Ash—The ash samples were ana- Wood lyzed for 29 inorganic elements. The ash Plastic (No. 6) packaging from campfires that just burned wood Plastic (No. 1) bottles Diaper had high concentrations of barium (Ba), Snack-size chip bags calcium (Ca), potassium (K), magnesium Alkaline and lithium batteries (Mg), and sulfur (S). The concentrations Spinning rod with line Meal-Ready-to-Eat packaging of highly toxic elements such as cadmi- Miscellaneous tape Styrene um (Cd) and mercury (Hg) were barely Plastic (No. 4) tray within the detection limits of the instru- Nickel-cadmium batteries Aluminum foil ment used to analyze the ash from camp- Plastic bags fires that just burned wood. Plastic grocery bags Plastic and foil packaging Aluminum pop can Campfires with Wood Plastic (No. B2) plate and Garbage Smoke—The four products that Figure 5—The amount of styrene—a suspected carcinogen—in a campfireʼs smoke increased, released high levels of toxins in smoke sometimes dramatically, when garbage items were added to the wood fire. 4 Burning plastic bags released large Relative amount of xylene in smoke amounts of acrolein. Other products that 0 40 80 120 Wood released acrolein were styrofoam cups Plastic (No. 1) bottles and alkaline and lithium batteries (fig- Diaper ure 9). Cigarette and candy wrappers When plastic bags were burned in Snack-size chip bags a campfire, furan emissions were seven Alkaline and lithium batteries Spinning rod with line times higher than emissions from camp- Meal-Ready-to-Eat packaging Xylene fires that just burned wood (figure 10). Miscellaneous tape Campfires burning nickel-cadmium Nickel-cadmium batteries batteries and aluminum foil released more Hard plastic container Plastic bags than four times as much naphthalene as Plastic grocery bags campfires that just burned wood (figure Plastic and foil packaging 11). Aluminum pop can Ash—Many elemental metals occur Plastic (No. 2) plate naturally in the Earthʼs crust and in rocks. Small amounts of many of these metals Figure 6—The amount of xylene—a suspected carcinogen—in a campfireʼs smoke increased, are necessary to support life. But in larger sometimes dramatically, when garbage items were added to the wood fire. amounts, they may be toxic. Several elemental metals that can Toluene is abundant in the smoke of burned four different garbage items re- be toxic to humans, animals, and plants campfires that just burn wood. Only nick- leased large amounts of acetaldehyde were detected at elevated levels in camp- (figure 8). The garbage items were: fires that burned garbage. They were el-cadmium batteries (figure 7) released more toluene in smoke than wood. The fire was not large or hot enough to burn Relative amount of the batteries completely. If the batteries acetaldehyde in smoke 0 20 40 60 80 had been burned in a hotter fire, they Wood could have released more chemical Plastic (No. 1) bottles compounds. Snack-size chip bags Acetaldehyde Styrofoam cups Relative amount of toluene in smoke Alakaline and lithium batteries 0 1 2 Wood Nickel-cadmium Toluene batteries Figure 8—Compared to several garbage items, wood releases just a small amount of acetaldehyde when it is burned in a campfire. Acetaldehyde causes cancer in animals. Figure 7—Nickel-cadmium batteries were the only garbage item that released more of the toxin • Alkaline and lithium batteries • Cadmium • Lead toluene—a suspected carcinogen—than wood • Styrofoam cups • Beryllium • Mercury when burned in a campfire. • Snack-size chip bags Cadmium dust is carcinogenic to Only a small amount of acetalde- • Clear plastic pop bottles humans and animals. Cadmium is used hyde was released from campfires that Acrolein is a major air pollutant and in batteries and dyes. High levels were just burned wood, but campfires that is a severe irritant to the eyes and nose. detected in the ash from campfires that 5 campfires that burned nickel-cadmium, Relative amount of acrolein (2-propenal) in smoke alkaline, and lithium batteries (figure 13). 0 1 2 3 4 5 6 7 8 9 Lead is a suspected carcinogen and Wood may affect the lungs and kidneys. Small Styrofoam cups Acrolein amounts are present naturally in certain Alakaline and lithium batteries (2-propenal) soils. Lead is used in storage batteries Plastic bags and for pigments in paint. A small amount of lead was detected in the ash from campfires that just burned wood. Figure 9—Very high amounts of the air pollutant acrolein (2-propenal) were released when plastic However, almost 10 times more lead was bags were burned in a campfire. Acrolein is toxic to aquatic organisms. detected in the ash from the campfire that burned a broken fiberglass spinning Relative amount of furan rod. Additional garbage items that left in smoke 0 1 2 3 4 5 6 7 8 elevated amounts of lead in the ash (fig- Wood ure 14) were: • Plastic bags Furan Nickel-cadmium batteries • Packaging for freeze-dried meals • Plastic forks and spoons • Figure 10—Emissions of furan were seven times as high when plastic bags were burned in a campfire Snack-size chip bags than when the campfire just burned wood. Furan is on the U.S. Environmental Protection Agencyʼs • White plastic lids for disposable hot list of extremely hazardous stubstances. beverage cups Exposure to high levels of mercury Relative amount of naphthalene in smoke results in permanent nervous system and 0 1 2 3 4 5 6 7 8 9 10 kidney damage. Mercury levels were Wood barely detectable in the ash from camp- Nickel-cadmium batteries Naphthalene fires that just burned wood. The only Aluminum foil garbage items that left more than three times as much mercury in the ash were cigarette and candy wrappers. Figure 11—Campfires burning nickel-cadmium batteries and aluminum foil released much more naphthalene—a suspected carcinogen—than campfires that just burned wood. burned nickel-cadmium batteries and in Relative amount of cadmium smaller amounts from campfires that in ash 0 400 800 1200 1600 burned a colored cardboard box and Wood alkaline and lithium batteries (figure 12). Colored cardboard box Although there is only limited evi- Cadmium dence that beryllium causes cancer in Alkaline and lithium batteries humans, there is evidence that it causes Nickel-cadmium batteries cancer in animals. Beryllium levels were barely detectable in the ash from camp- fires that just burned wood. High levels Figure 12—Nickel-cadmium batteries, colored cardboard, and alkaline and lithium batteries left higher levels of cadmium in the ash than did a campfire that just burned wood. Cadmium dust is of beryllium were detected in the ash of carcinogenic to humans and animals. 6 This study was performed to simu- Relative amount of beryllium in ash late a campfire. The amount of pollutant 0 20 40 60 80 produced by wood fires changes as the Wood fires burn. A study conducted under Nickel-cadmium batteries Beryllium controlled conditions that took the com- Alkaline and lithium batteries bustion efficiencies of different fuels into account could produce different results than those of this informal study. Figure 13—Ash from a campfire that burned nickel-cadmium and alkaline and lithium batteries had high levels of beryllium, which causes cancer in animals. Beryllium levels were barely detectable in The common-sense summary of the the ash when the campfire just burned wood. results of this study is: Do not burn garbage in a campfire! Pack it in, pack Relative amount of lead it out. in ash 0 2 4 6 8 Wood Acknowledgments Nickel-cadmium batteries I would like to thank Dr. Ron Susott, Ron Babbitt, Sherri Dingley, and Steve Alkaline and lithium batteries Baker of the Rocky Mountain Research Spinning rod with line Stationʼs fire chemistry project in Mis- Lead soula, MT, for peer review and for con- Packaging for freeze-dried meals tributing their research knowledge of fire chemistry; Sherri Dingley for collecting Plastic hot-beverage cup lids and analyzing the gas samples; Tony Plastic forks and spoons Ward of the University of Montanaʼs Center for Environmental Health Sci- Snack-size chip bags ences for his review and expertise with toxins that are hazardous to human health; and Lori Messenger, smokejumper, for Figure 14—Some garbage items left elevated levels of lead—a suspected carcinogen—in the ash compared to a campfire that just burned wood.
Recommended publications
  • Module III – Fire Analysis Fire Fundamentals: Definitions
    Module III – Fire Analysis Fire Fundamentals: Definitions Joint EPRI/NRC-RES Fire PRA Workshop August 21-25, 2017 A Collaboration of the Electric Power Research Institute (EPRI) & U.S. NRC Office of Nuclear Regulatory Research (RES) What is a Fire? .Fire: – destructive burning as manifested by any or all of the following: light, flame, heat, smoke (ASTM E176) – the rapid oxidation of a material in the chemical process of combustion, releasing heat, light, and various reaction products. (National Wildfire Coordinating Group) – the phenomenon of combustion manifested in light, flame, and heat (Merriam-Webster) – Combustion is an exothermic, self-sustaining reaction involving a solid, liquid, and/or gas-phase fuel (NFPA FP Handbook) 2 What is a Fire? . Fire Triangle – hasn’t change much… . Fire requires presence of: – Material that can burn (fuel) – Oxygen (generally from air) – Energy (initial ignition source and sustaining thermal feedback) . Ignition source can be a spark, short in an electrical device, welder’s torch, cutting slag, hot pipe, hot manifold, cigarette, … 3 Materials that May Burn .Materials that can burn are generally categorized by: – Ease of ignition (ignition temperature or flash point) . Flammable materials are relatively easy to ignite, lower flash point (e.g., gasoline) . Combustible materials burn but are more difficult to ignite, higher flash point, more energy needed(e.g., wood, diesel fuel) . Non-Combustible materials will not burn under normal conditions (e.g., granite, silica…) – State of the fuel . Solid (wood, electrical cable insulation) . Liquid (diesel fuel) . Gaseous (hydrogen) 4 Combustion Process .Combustion process involves . – An ignition source comes into contact and heats up the material – Material vaporizes and mixes up with the oxygen in the air and ignites – Exothermic reaction generates additional energy that heats the material, that vaporizes more, that reacts with the air, etc.
    [Show full text]
  • Safety Data Sheet
    Coghlan’s Magnesium Fire Starter #7870 SAFETY DATA SHEET This Safety Data Sheet complies with the Canadian Hazardous Product Regulations, the United States Occupational Safety and Health Administration (OSHA) Hazard Communication Standard, 29 CFR 1910 (OSHA HCS), and the European Union Directives. 1. Product and Supplier Identification 1.1 Product: Magnesium Fire Starter 1.2 Other Means of Identification: Coghlan’s #7870 1.3 Product Use: Fire starter 1.4 Restrictions on Use: None known 1.5 Producer: Coghlan’s Ltd., 121 Irene Street, Winnipeg, Manitoba Canada, R3T 4C7 Telephone: +1(204) 284-9550 Facsimile: +1(204) 475-4127 Email: [email protected] Supplier: As above 1.6 Emergencies: +1(877) 264-4526 2. Hazards Identification 2.1 Classification of product or mixture This product is an untested preparation. GHS classification for this preparation is based upon its use as a fire starter by making shavings and small particulate from the metal block. As shipped in mass form, this preparation is not considered to be a hazardous product and is not classifiable under the requirements of GHS. GHS Classification: Flammable Solids, Category 1 2.2 GHS Label Elements, including precautionary statements Pictogram: Signal Word: Danger Page 1 of 11 October 18, 2016 Coghlan’s Magnesium Fire Starter #7870 GHS Hazard Statements: H228: Flammable Solid GHS Precautionary Statements: Prevention: P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P280: Wear protective gloves, eye and face protection Response: P370+P378: In case of fire use water as first choice. Sand, earth, dry chemical, foam or CO2 may be used to extinguish.
    [Show full text]
  • Operating and Maintaining a Wood Heater
    OPERATING AND MAINTAINING A WOODHEATER FIREWOOD ASSOCIATION THE FIREWOODOF AUSTRALIA ASSOCIATION INC. OF AUSTRALIA INC. Building a wood fire Maintaining a wood heater For any fire to start and keep going three things are needed, Even in correctly operated wood heaters and fireplaces, some fuel, oxygen and heat. In wood fires the fuel is provided by the of the combustion gases will condense on the inside of the wood, the oxygen comes from the air, and the initial heat comes flue or chimney as a black tar-like substance called creosote. from burning paper or a fire lighter. In a going fire the heat is If this substance is allowed to build up it will restrict the air flow provided by the already burning wood. Without fuel, heat and in the heater or fireplace, reducing its efficiency. Eventually oxygen the fire will go out. When the important role of oxygen a build up of creosote can completely block the flue, making is understood, it is easy to see why you need plenty of air space around each piece of kindling when setting up the fire. the fire impossible to operate. One sign of a blocked flue is smoke coming into the room when you open the heater door. Kindling catches fire easily because it has a large surface Creosote appearing on the glass door is another indication area and small mass, which allows it to reach combustion that your heater is not working properly. Because creosote temperature quickly. The surface of a large piece of wood is flammable, if the chimney or flue gets hot enough the will not catch fire until it has been brought up to combustion creosote can catch alight, causing a dangerous chimney fire.
    [Show full text]
  • Learn the Facts: Fuel Consumption and CO2
    Auto$mart Learn the facts: Fuel consumption and CO2 What is the issue? For an internal combustion engine to move a vehicle down the road, it must convert the energy stored in the fuel into mechanical energy to drive the wheels. This process produces carbon dioxide (CO2). What do I need to know? Burning 1 L of gasoline produces approximately 2.3 kg of CO2. This means that the average Canadian vehicle, which burns 2 000 L of gasoline every year, releases about 4 600 kg of CO2 into the atmosphere. But how can 1 L of gasoline, which weighs only 0.75 kg, produce 2.3 kg of CO2? The answer lies in the chemistry! Î The short answer: Gasoline contains carbon and hydrogen atoms. During combustion, the carbon (C) from the fuel combines with oxygen (O2) from the air to produce carbon dioxide (CO2). The additional weight comes from the oxygen. The longer answer: Î So it’s the oxygen from the air that makes the exhaust Gasoline is composed of hydrocarbons, which are hydrogen products heavier. (H) and carbon (C) atoms that are bonded to form hydrocarbon molecules (C H ). Air is primarily composed of X Y Now let’s look specifically at the CO2 reaction. This reaction nitrogen (N) and oxygen (O2). may be expressed as follows: A simplified equation for the combustion of a hydrocarbon C + O2 g CO2 fuel may be expressed as follows: Carbon has an atomic weight of 12, oxygen has an atomic Fuel (C H ) + oxygen (O ) + spark g water (H O) + X Y 2 2 weight of 16 and CO2 has a molecular weight of 44 carbon dioxide (CO2) + heat (1 carbon atom [12] + 2 oxygen atoms [2 x 16 = 32]).
    [Show full text]
  • Combustion Chemistry William H
    Combustion Chemistry William H. Green MIT Dept. of Chemical Engineering 2014 Princeton-CEFRC Summer School on Combustion Course Length: 15 hrs June 2014 Copyright ©2014 by William H. Green This material is not to be sold, reproduced or distributed without prior written permission of the owner, William H. Green. 1 Combustion Chemistry William H. Green Combustion Summer School June 2014 2 Acknowledgements • Thanks to the following people for allowing me to show some of their figures or slides: • Mike Pilling, Leeds University • Hai Wang, Stanford University • Tim Wallington, Ford Motor Company • Charlie Westbrook (formerly of LLNL) • Stephen J. Klippenstein (Argonne) …and many of my hard-working students and postdocs from MIT 3 Overview Part 1: Big picture & Motivation Part 2: Intro to Kinetics, Combustion Chem Part 3: Thermochemistry Part 4: Kinetics & Mechanism Part 5: Computational Kinetics Be Prepared: There will be some Quizzes and Homework 4 Part 1: The Big Picture on Fuels and Combustion Chemistry 5 What is a Fuel? • Fuel is a material that carries energy in chemical form. • When the fuel is reacted (e.g. through combustion), most of the energy is released as heat • Though sometimes e.g. in fuel cells or flow batteries it can be released as electric power • Fuels have much higher energy densities than other ways of carrying energy. Very convenient for transportation. • The energy is released via chemical reactions. Each fuel undergoes different reactions, with different rates. Chemical details matter. 6 Transportation Fuel: Big Issues •People want, economy depends on transportation • Cars (growing rapidly in Asia) • Trucks (critical for economy everywhere) • Airplanes (growing rapidly everywhere) • Demand for Fuel is “Inelastic”: once they have invested in a vehicle, people will pay to fuel it even if price is high •Liquid Fuels are Best • Liquids Flow (solids are hard to handle!) • High volumetric and mass energy density • Easy to store, distribute.
    [Show full text]
  • Fundamentals of Applied Smouldering Combustion
    Western University Scholarship@Western Electronic Thesis and Dissertation Repository 6-20-2018 10:00 AM Fundamentals of Applied Smouldering Combustion Marco Zanoni The University of Western Ontario Supervisor Gerhard, Jason I. The University of Western Ontario Co-Supervisor Torero, Jose L. The University of Western Ontario Graduate Program in Civil and Environmental Engineering A thesis submitted in partial fulfillment of the equirr ements for the degree in Doctor of Philosophy © Marco Zanoni 2018 Follow this and additional works at: https://ir.lib.uwo.ca/etd Part of the Environmental Engineering Commons, and the Heat Transfer, Combustion Commons Recommended Citation Zanoni, Marco, "Fundamentals of Applied Smouldering Combustion" (2018). Electronic Thesis and Dissertation Repository. 5410. https://ir.lib.uwo.ca/etd/5410 This Dissertation/Thesis is brought to you for free and open access by Scholarship@Western. It has been accepted for inclusion in Electronic Thesis and Dissertation Repository by an authorized administrator of Scholarship@Western. For more information, please contact [email protected]. Abstract Smouldering combustion is defined as a flameless oxidation reaction occurring on the surface of the condensed phase (i.e., solid or liquid). Traditional research on smouldering was related to economic damages, fire risk, and death, due to the release of toxic gases and slow propagation rates. Recently, smouldering has been applied as an intentional, engineering technology (e.g., waste and contaminant destruction). Smouldering involves the transport of heat, mass, and momentum in the solid and fluid phases along with different chemical reactions. Therefore, numerical models are essential for the fundamental understanding of the process. Smouldering models either neglected heat transfer between phases (i.e., assumed local thermal equilibrium) or employed heat transfer correlations (i.e., under local thermal non- equilibrium conditions) not appropriate for smouldering.
    [Show full text]
  • Pre-Validation of an Acute Inhalation Toxicity Assay Using the Epiairway in Vitro Human Airway Model
    Pre-Validation of an Acute Inhalation Toxicity Assay Using the EpiAirway In Vitro Human Airway Model George R. Jackson, Jr., Michelle Debatis, Anna G. Maione, Patrick J. Hayden Exposure to potentially dangerous chemicals can occur through inhalation. UNDERSTANDING HUMAN BIOLOGY IN DIMENSIONS3 2 Regulatory systems for classifying the acute inhalation toxicity of chemicals ≤ 0.05 mg/l > 0.05 ≤ 0.5 mg/l > 0.5 ≤ 2 mg/l > 2 mg/l Respirator Use Required 3 Regulatory systems for classifying the acute inhalation toxicity of chemicals 4 OECD 403/436 is the currently accepted test method for determining acute inhalation toxicity OECD Test Guidelines 403/436: In vivo rat LD50 test (dose at which 50% of the animals die) 4 hour exposure 14 Days Examination: - Death -Signs of toxicity -Necropsy should be performed (not always reported) Nose/Head only (preferred) Whole body Repeat stepwise with additional concentrations as necessary 5 Our goal is to develop & validate an in vitro test for acute inhalation toxicity UNDERSTANDING HUMAN BIOLOGY IN DIMENSIONS3 6 The EpiAirway Model EpiAirway is an in vitro 3D organotypic model of human tracheal/bronchial tissue. - Constructed from primary cells - Highly reproducible - Differentiated epithelium at the air-liquid interface - Beating cilia - Mucus secretion - Barrier function - Physiologically relevant & predictive of the human outcome Air Cilia Differentiated epithelium Microporous membrane Media 7 EpiAirwayTM acute inhalation toxicity test method Prepare 4-point dose Apply chemical to Incubate for 3 hours Examination: curve of chemical in the apical surface - Tissue viability (MTT) dH2O or corn oil Advantages of using the in vitro EpiAirway test: 1.
    [Show full text]
  • EMPLOYEE FIRE and LIFE SAFETY: Developing a Preparedness Plan and Conducting Emergency Evacuation Drills
    EMPLOYEE FIRE AND LIFE SAFETY: Developing a Preparedness Plan and Conducting Emergency Evacuation Drills The following excerpts are taken from the book Introduction to Employee Fire and Life Safety, edited by Guy Colonna, © 2001 National Fire Protection Association. EXCERPTS FROM CHAPTER 3: Quick Tip Developing a Preparedness Plan To protect employees from fire and other emergencies and to prevent Jerry L. Ball property loss, whether large or small, companies use preparedness plans Fire is only one type of emergency that happens at work. Large and (also called pre-fire plans or pre- small workplaces alike experience fires, explosions, medical emergen- incident plans). cies, chemical spills, toxic releases, and a variety of other incidents. To protect employees from fire and other emergencies and to prevent property loss, whether large or small, companies use preparedness plans (also called pre-fire plans or pre-incident plans). The two essential components of a fire preparedness plan are the following: 1. An emergency action plan, which details what to do when a fire occurs 2. A fire prevention plan, which describes what to do to prevent a fire from occurring Of course, these two components of an overall preparedness plan are inseparable and overlap each other. For the purposes of this discus- sion, however, this chapter subdivides these two components into even smaller, more manageable subtopics. OSHA REGULATIONS uick ip Emergency planning and training directly influence the outcome of an Q T emergency situation. Facilities with well-prepared employees and Emergency planning and training directly influence the outcome of an well-developed preparedness plans are likely to incur less structural emergency situation.
    [Show full text]
  • Oxygen-Enriched Combustion
    Energy Tips – Process Heating Process Heating Tip Sheet #3 • September 2005 Industrial Technologies Program Suggested Actions Oxygen-Enriched Combustion • Use current or projected energy costs with PHAST to estimate When a fuel is burned, oxygen in the combustion air chemically combines with energy savings from oxygen- the hydrogen and carbon in the fuel to form water and carbon dioxide, releasing enriched combustion. heat in the process. Air is made up of 21% oxygen, 78% nitrogen, and 1% other • Contact furnace or combustion gases. During air–fuel combustion, the chemically inert nitrogen in the air dilutes system suppliers to calculate the reactive oxygen and carries away some of the energy in the hot combustion payback or return on investment. exhaust gas. An increase in oxygen in the combustion air can reduce the energy • Include the cost of oxygen or loss in the exhaust gases and increase heating system efficiency. of the vacuum pressure swing adsorption unit in the calculations. Most industrial furnaces Figure 1. Oxygen-enriched burner that use oxygen or oxygen- Resources enriched air use either U.S. Department of Energy— liquid oxygen to increase For additional information on the oxygen concentration process heating system efficiency, in the combustion air or to obtain DOE’s publications and vacuum pressure swing Process Heating Assessment and adsorption units to remove Survey Tool (PHAST) software, some of the nitrogen and or learn more about training, Courtesy Air Products increase the oxygen visit the BestPractices Web site at www.eere.energy.gov/industry/ content. Some systems use almost 100% oxygen in the main combustion header; bestpractices.
    [Show full text]
  • 1997-11-12 Acrolein As Federal Hazardous Air Pollutant
    ACROLEIN Acrolein is a federal hazardous air pollutant and was identified as a toxic air contaminant in April 1993 under AB 2728. CAS Registry Number: 107-02-8 H2C=CHCHO Molecular Formula: C3H4O Acrolein is a colorless or yellowish, flammable liquid with an unpleasant, extremely pungent odor. It is soluble in petroleum ether, water, and alcohol and miscible with hydrocarbons, acetone, and benzene (Sax, 1989). Acrolein polymerizes (especially in the presence of light, alkali, or strong acid) forming disacryl, a plastic solid (Merck, 1989). Physical Properties of Acrolein Synonyms: acraldehyde; allyl aldehyde; acrylic aldehyde; Biocide; 2-propenal Molecular Weight: 56.06 Boiling Point: 52.5 oC Melting Point: -88.0 oC Flash Point: -18 oC (< 0 oF) (open cup) Vapor Density: 1.94 (air = 1) Vapor Pressure: 210 mm Hg at 20 oC Density/Specific Gravity: 0.8389 at 20/4 oC Log Octanol/Water Partition Coefficient: -0.09 Water Solubility: 208,000 mg/L at 20 oC Henry's Law Constant: 4.4 x 10-6 atm-m3/mole Conversion Factor: 1 ppm = 2.29 mg/m3 (Howard, 1990; HSDB, 1991; Merck, 1989; U.S. EPA, 1994a) SOURCES AND EMISSIONS A. Sources Acrolein is emitted from sources where it is manufactured and used as an intermediate for glycerine, methionine, glutaraldehyde, and other organic chemicals. It is also found in tobacco smoke, forest fire emissions, and gasoline and diesel exhaust. Acrolein is also a photooxidation product of various hydrocarbons including 1,3-butadiene (Howard, 1990). Toxic Air Contaminant Identification List Summaries - ARB/SSD/SES September 1997 23 Acrolein The primary stationary sources that have reported emissions of acrolein in California are paper mills, and abrasive, asbestos, miscellaneous non-metallic mineral, and wood products (ARB, 1997b).
    [Show full text]
  • Filter Chart
    Filter Chart Chemical Filter Chemical Filter Chemical Filter Abate FFP1 tert-Butyl acetate A1 Copper fume FFP1 Acetaldehyde A1 Butyl acrylate A1 Dusts & mist (as Cu) FFP1 Acetic acid E1 n-Butyl alcohol A1 Cotton dust, raw FFP1 Acetic anhydride B1 sec-Butyl alcohol R A1 Crag herbicide FFP1 Acetonitrile A1 Butylamine B1 Cresol, all isomers FFP1 Acetylene dichloride A1 tert-Butyl chromate (as Cro3) FFP1 Cumene FFP1 Acetylene tetrabromide A1 n-Butyl glycidyl ether(BGE) A1 Cyanamide A1 P1 Acetylsalicylic acid FFP2 n-Butyl lactate A1 Cyanogen B1 Acrolein A1 o-sec Butyl phenol A1 Acrylamide A1 P2 p-tert Butyltoluene A1 Cyanogen chloride (CK) B1 Acrylonitrile A1 Cadmium, dust & salts (as Cd) FFP1 Cyclohexane A1 Aldrin A1 P2 Cadmium oxide fume (as Cd) FFP1 Cyclohexnol A1 Allyl alcohol A1 Calcium cyanamide FFP1 Cyclohexanone A1 Allyl chloride A1 Calcium hydroxide FFP1 Cyclohexene Allyl glycidyl ether (AGE) A1 Calcium oxide FFP1 A1 Allyl propyl disulfide B1 Camphor, synthetic A1 Cyclohexylamine A1 Aluminium metal and oxide FFP2 Caprolactam Dust FFP1 Cyclonite B1 Aluminium pyro powders FFP2 Vapor A1 1.3 Cyclopentadiene A1 Aluminium welding fumes A1 P2 Captafol(DifolatanR) FFP1 2.4-D (2.4-Dichlorophenoxy acetic acid) FFP1 Aluminium soluble salts FFP2 Captan FFP1 Aluminium, alkyls A1 R Carbary (Seven ) FFP1 D.D.T. (Dichlorodiphenyl A1 P1 4-Aminodiphenyl FFP1 Carbofuran (FuradanR) FFP1 trichloroethane) A1 P1 2- Aminoethanol A1 Carbon black FFP1 DDVP Decaborane B1 P1 2- Aminopyridine K1 Carbon dusulfide B1 DemetonR B1 P1 Ammonia A1 Carbon tetrabromide
    [Show full text]
  • Acrolein Hazards to Fish, Wildlife, and Invertebrates: a Synoptic Review
    Biological Report 23 Contaminant Hazard Reviews June 1994 Report 28 Acrolein Hazards to Fish, Wildlife, and Invertebrates: A Synoptic Review By Ronald Eisler U.S. Department of the Interior National Biological Survey Patuxent Environmental Science Center Washington, D.C. 20240 Abstract Sources and Uses General Sources Uses Environmental Chemistry General Chemical Properties Persistence Metabolism Lethal and Sublethal Effects General Terrestrial Plants and Invertebrates Aquatic Organisms Birds Mammals Recommendations Acknowledgments Cited Literature TABLES Number 1 Chemical and other properties of acrolein 2 Acrolein effects on representative aquatic organisms 3 Acrolein effects on birds 4 Acrolein effects on selected mammals 5 Proposed acrolein criteria for the protection of living resources and human health FIGURE Proposed scheme for in vitro mammalian metabolism of acrolein and allyl alcohol, a precursor of acrolein Suggested citation: Eisler, R. 1994. Acrolein hazards to fish, wildlife, and invertebrates: a synoptic review. U. S. National Biological Survey Biological Report 23. 2 Acrolein Hazards to Fish, Wildlife, and Invertebrates: A Synoptic Review by Ronald Eisler U.S. Department of the Interior National Biological Survey Patuxent Environmental Science Center Washington, D.C. 20240 Abstract. Acrolein (CH2=CHCHO) is the simplest member of the unsaturated aldehydes and enters the environment from incomplete combustion of fossil fuels, industrial discharges, herbicides, chemical control agents of fouling organisms, and normal metabolic processes of animals. Acrolein is volatile, flammable, and explosive. Biochemical and toxic effects of acrolein are caused by its reaction with sulfhydryl compounds to form a stable thiol ether. Acrolein metabolites under certain conditions are reportedly mutagenic, teratogenic, or carcinogenic. Acrolein degrades quickly in soils and in plant tissues; in water the half-time persistence is usually less than 50 h and in the atmosphere, less than 3 h.
    [Show full text]