cPCI-6S10 6U CompactPCI 10 Gigabit Switch Blade

Features

● 24-port fully managed Gigabit Ethernet switch ● ARM Cortex-A9 processor integrated in Broadcom BCM56150 switch ● Layer 2/3 switching with advanced support for VLANs, QoS and IPv6 ● Two SFP+ uplink ports ● Supports based on PCIMG 2.9 (System Management Specification) ● Pre-installed ADLINK PacketManager accelerates packet processing

Specifications ● Processor & System ● Operating System Switch Fabric OS Broadcom BCM56150 24-port Gigabit Ethernet switch with two 10 Gigabit Broadcom SDK under Linux (Please contact ADLINK for other OS support) SFP+ uplink ports, integrated ARM Cortex-A9 processor

PHY ● Miscellaneous Broadcom BCM54685 Octal port 1000BASE-T PHY LEDs Broadcom BCM5221 100M PHY Power Good, 24-port 1000BASE-T, 2-port 10 Gigabit

CPU Hardware Monitor ARM Cortex-A9 CPU integrated in Broadcom BCM56150 Monitors voltages of CPU, switch and PHY by IPMI

Flash Reset Button 8MB SLC QSPI NAND flash Passive reset button on front panel for blade reset

PICMG standards ● Mechanical & Environmental PICMG 2.0 CompactPCI R3.0 Form Factor PICMG 2.9 System Management R1.0 6U 4HP (single slot) PICMG 2.16 Packet Switch R1.0 233.35mm x 160mm (L x W) ● Interface Operating Temperature Ethernet 0°C to +60°C for air cooled Twenty 1000BASE-T ports to J3/J5 for node slots Storage Temperature Three 1000BASE-T ports to front panel -50°C to +100°C Two 10 Gigabit ports to front panel for uplink One 10/100/1000BASE-T port to J4 for optional applicaiton RH Humidity One 10/100BASE-TX port PHY to front panel for remote management 95% non-condensing

Management Shock 500 kB on-chip frame buffer 15G peak-to-peak, 11ms duration, non-operating DSCP remarking for both IPv4 and IPv6 Vibration Jumbo frame support 2Grms random vibration between 5-500Hz in 3 axis, operating Programmable classifier for QoS, IEEE802.1p and DSCP for IPv4 and IPv6 8k MAC addresses and 4k VLANs (IEEE 802.1Q) Flexible link aggregation compliant to IEEE 802.3ad ● Safety & EMI Full-duplex flow control (IEEE 802.3x) and half duplex back pressure, Certification symmetric and asymmetric multiple protocol support: IEEE 802.1D, IEEE CE/ FCC Class A 802.1w, IEEE 802.1s and IEEE 802.1X

COM One RJ-45 RS-232 console port on front panel for management Specifications ● Compatible CPU Blades CPU Blade cPCI-6940/cPCI-6530/cPCI-6520/cPCI-6930/cPCI-6210/cPCI-6510

● Compactible Chassis cPCIS-3300BLS 9U CompactPCI chassis with dual fabric switch slots and redundant power supply

Ordering Information Switch Blade

● cPCI-6S10 1-slot 4HP 6U CompactPCI Switch Blade with 24 1000BASE-T ports, 2 10G SFP+ ports and PacketManager software bundle

Rear Transition Modules 6x GbE

● cPCI-R6S10 20x GbE 6U 8HP Rear Transition Module for cPCI-6S10 with 20 GbE RJ-45 ports ● cPCI-R6S11 6U 4HP Rear Transition Module for cPCI-6S10 with 6 GbE RJ-45 ports supporting PICMG 2.16 cPCI-R6S10 cPCI-R6S11

● cBP-6609A 6U 8-slot CompactPCI PICMG H.110 & PICMG 2.16 packet switching backplane ● cBP-6614A 6U 14-slot PICMG 2.16 CompactPCI blade backplane

www.adlinktech.com All products and company name listed are trademarks or trade names of their respective companies. Updated Mar. 10, 2017. ©2017 ADLINK Technology, Inc. All Rights Reserved. All specifications are subject to change without further notice. Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

ADLINK Technology: cPCI-R6S11 cPCI-6S10