Snap on Tools Franchise Complaints
Total Page:16
File Type:pdf, Size:1020Kb
Load more
Recommended publications
-
PSD 2013 Bond Levy
VIA ELECTRONIC TRANSMISSION Roger E. Lenk 1817 N. Road 76 Pasco, Washington 99301-1830 (509) 542-0489 [email protected] June 10, 2013 Bob Ferguson, Attorney General Washington Office of the Attorney General 1125 Washington Street SE PO Box 40100 Olympia, Washington 98504-0100 (VIA Priority Mail) Phil Stutzman, Director of Compliance State of Washington Public Disclosure Commission 711 Capitol Way Room 206 Post Office Box 40908 Olympia, Washington 98504-0908 Re: SUPERINTENDENT SAUNDRA LYNNE HILL, WSBA No. 31016, et. al. AND PASCO CITIZENS FOR BETTER SCHOOLS – VIOLATIONS OF RCW 42.17A.555 & RCW 42.17A.750 Honorable Bob Ferguson and Mr. Stutzman: Submitted herewith is a complaint concerning the violation of RCW 42.17A.555. As you are aware, RCW 42.17A.555 prohibits the use of public office or agency facilities in political campaigns. As the violations enumerated herein “probably affected the outcome of (the) election”, the Attorney General is hereby requested to investigate and bring civil action under RCW 42.17A.750. Such remedy is necessary in order to void the subject election, hold a special election within sixty days of the finding, and “protect the right of the electorate to an informed and knowledgeable vote”. After reviewing fourteen (14) years of Public Disclosure Commission Compliance Complaints for violations of RCW 42.17.130/42.17A.555, this case, by far, is the most egregious, expansive and organized, involving the largest misappropriation of public resources. This case necessitates a thorough, high priority investigation to resolve the outstanding issues as soon as possible. Re: SUPERINTENDENT SAUNDRA LYNNE HILL, WSBA No. -
06/27/19 Severson, Weathers, Mackey & Others Estate Auction
09/25/21 09:13:59 06/27/19 Severson, Weathers, Mackey & Others Estate Auction Auction Opens: Sat, Jun 22 3:00pm PT Auction Closes: Thu, Jun 27 5:30pm PT Lot Title Lot Title 0001 Nice 2013 Kubota B2320HSD Tractor CASH 0028 Oxygen & Acetylene Torch Setup ONLY! 0029 Central Hydraulics 20-Ton Press 0002 Mac Tools MW200 UltraMig 200 Welder - 0030 2 Sets of Jack Stands Tested Works 0031 Motorcycle Stand? 0003 Ferret 40 Charging System Analyzer 0032 Portable Vehicle Hydraulic Lift / Jack 0004 Mac Tools 3-1/2? Ton MFJ35 Hydraulic Floor Jack 0033 Multi-Gear Lube Oil Drum w/Pump & Oil 0005 Dual Halogen Light Tripod Utility Light 0034 Central Pneumatic 3/8" & 1/2" Drive Air Wrenches 0006 FCI Professional Parts Cabinet - Loaded 0035 Central Pneumatic Air Wrench, Ratchet & 0007 FCI Professional Parts Cabinet - Loaded Flush Gun 0008 Cornwell Rolling Tool Chest - Loaded! 0036 Matco Tools 1/2" Drive Stubby Impact Wrench 0009 4 Halide Grow Light 22" x 20" Reflectors 0037 Mac Tools Air Cutoff Tool w/3 Bx. Of Cutoff 0010 Osram Sylvania Auto Bulbs Parts Organizer Wheels 0011 Sun Service Equipment Parts Cabinet - Loaded 0038 4 Drill Bit Indexes 0012 Sears Engine Analyzer & Mac Digital Multi- 0039 Automotive Tune Up Analyzer & Digital Multi- Meter Meter 0013 Pittsburg Heavy Duty 3-Ton Hydraulic Floor 0040 Mueller Kueps Universal Press Support Jack 0041 Easy Rider, Playboy & Other Magazines 0014 Matco Diagnostics Lab Scope & Digital 0042 Hydraulic Press Accessories & Jack Analyzer 0043 Come-A-Longs & Engine Hoist Crane 0015 Wilmar? 2-Ton Hydraulic Floor Jack -
The Stanley Works 2005 Annual Report
FINANCIAL HIGHLIGHTSHIGHLIGHTS (MILLIONS OF DOLLARS, EXCEPT PER SHARE AMOUNTS) 2005 2004 CHANGE Closing market price per share $ 48.04 $ 48.99 (2%) Total return (share price change plus dividends) 1% 35% Net sales from continuing operations $ 3,285 $ 2,997 10% Operating income from continuing operations $ 445 $ 412 8% Percent of sales 13.5% 13.8% (30bp) Net earnings from continuing operations $ 272 $ 237 15% Per share from continuing operations $ 3.18 $ 2.81 13% Net earnings $ 270 $ 367 (27%) Per share $ 3.16 $ 4.36 (28%) Free cash flow* $ 294 $ 317 (8%) Return on capital employed from continuing operations 14.8% 14.8% – Dividends per share $ 1.14 $ 1.08 6% * REFER TO PAGE 38 OF MD&A FOR THE RECONCILIATION OF OPERATING CASH FLOW TO FREE CASH FLOW TABLE OF CONTENTS LONG-TERM FINANCIAL OBJECTIVES BUSINESS SECTION SALES GROWTH Letter to Shareowners page 2 3-5% Organic Growth The Scorecard page 7 8-12% Growth Including Acquisitions Business Overview page 8 FINANCIAL PERFORMANCE FINANCIAL SECTION Mid-teens percentage EPS Growth Management’s Discussion And Free Cash Flow greater than or equal to Net Income Analysis of Financial Condition ROCE In 12-15% Range And Results of Operations page 31 Financial Statements page 47 DIVIDEND Notes page 51 Continued Growth CORPORATE SECTION CREDIT RATINGS Investor and Shareowner LONG-TERM“Upper Tier” Investment FINANCIAL Grade OBJECTIVES Information page 76 Board of Directors and Executive Officers page 77 THE STANLEY WORKS, AN S&P 500 COMPANY, IS A WORLDWIDE SUPPLIER OF TOOLS, HARDWARE AND SECURITY SOLUTIONS FOR PROFESSIONAL, INDUSTRIAL AND CONSUMER USE. -
Automotive/Fabrication Shop 09-20-14 Auction Held At: 8600
AUTOMOTIVE/FABRICATION SHOP 09-20-14 AUCTION HELD AT: 8600 S. I-35 SERVICE ROAD, OKC BUYER’S GUIDE The descriptions listed are believed to be correct, however, no warranty or guarantee, either express or implied shall be given, every item sold as is. Bidders shall rely upon their own inspections of the property and not upon any representations or descriptions of Dakil Auctioneers, Inc., either oral or written. ALL SALES FINAL ALL PROCEEDS DUE IMMEDIATELY FOLLOWING AUCTION 10% BUYER’S PREMIUM ON ALL PURCHASES 3% CONVENIENCE FEE ON ALL CREDIT CARD PURCHASES ALL ITEMS SOLD AS IS, NO WARRANTY OR GUARANTEE $50 PROCESSING FEE ON ALL TITLED VEHICLES REMOVAL TIMES : DAY OF AUCTION UNTIL 6:00 PM, SUNDAY SEPTEMBER 21ST FROM 1:00 PM - 4:00 PM, & MONDAY SEPTEMBER 22 ND FROM 9:00 AM - 5:00 PM. NO EXCEPTIONS! ALL ITEMS LISTED BELOW ARE LOCATED AT: 8600 S. I-35 SERVICE ROAD, OKC _______1 VACUUM PUMP ______35 ACT 3000 REFRIGERANT RECOVERY _______2 VACUUM PUMP RECYCLING _______3 VACUUM PUMP ______36 TOOL BOX & CABINET _______4 VACUUM PUMP ______37 CASE & PARTS (1X) _______5 VACUUM PUMP ______38 TRANSMISSION JACK _______6 VACUUM PUMP ______39 VAC & AIR TANK (2X) _______7 VACUUM PUMP ______40 DISTRIBUTOR CAPS (1X) BOX _______8 VACUUM PUMP ______41 OIL FILTERS (2X) BOXES _______9 PINNACLE A/C RECOVERY MACHINE ______42 MSA GAS MASK ______10 S/S CASE ______43 SURVIVAIR ______11 VACUUM PUMP ______44 CENTER CAPS (1X) LOT ______12 VACUUM PUMP ______45 RAPID FLEXX GUN ______13 VACUUM PUMP ______46 OU, MARBLES, WINDOW WASHER, ROPE, & ______14 VACUUM PUMP ELECTRIC -
Dealer List (US) Aircraft Spruce --(WEST) 225 Airport Circle Corona
Dealer List (US) Aircraft Spruce --(WEST) 225 Airport Circle Corona, CA 92880 www.aircraftspruce.com/catalog/topages/tightfittoolkit.php?clickkey=454414 1 800 824-1930 --(EAST) 452 Dividend Drive Peachtree City, GA 30269 1 800 831-2949 (00102, 00105, 00120, 00132, 00133, 00134, 00155, 00510) Brown Aviation Tool Supply Company --2536 S.E. 15th Street Oklahoma City, OK 73129 www.browntool.com/Listview/tabid/344/CategoryID/59/Level/a/ProductID/200/Default.aspx (00400) 1 800 587-3883 Cornwell Tools Drivers --Jim Allen 1350 Nordahl Road Escondido, CA 92026 (00105) (760) 212-7254 --Terrell Hunter 1103 W. 7th Street Meridian, ID 83642 (00105) (208) 860-1203 --Jason Wright 29971 White Sail Place Canyon Lake, CA 92587 (00105) (951) 764-2675 C.R. Laurence Company, Inc. --600 Wharton Drive Atlanta, GA 30336 www.crlaurence.com/crlapps/showline/offerpage.aspx? Productid=2420&GroupID=1096&History=39324:112:57606:1094&ModelID=1096 (404) 696-3445 (00101, 00120, 00132, 00133 00134) --2080 Lone Star Drive Dallas, TX 75212 (214) 634-7305 --4770 Joliet Street Denver, CO 80239 (303) 373-9988 --2765 Spectrum Drive Elgin, IL 60124 (847) 426-3800 --4420 Windfern Road Houston, TX 77041 (713) 462-6300 --23000 64th Avenue Kent, WA 98032 (253) 850-5800 --4120 Sobb Avenue Las Vegas, NV 89118 (702) 253-0211 --2503 E. Vernon Avenue Los Angeles, CA 90058 1 800 421-6144 --1511 Lancer Drive Moorsetown, NJ 08057 (856) 727-1022 --6950 Presidents Drive Orlando, FL 32809 (407) 857-7900 --640 South 54th Avenue Phoenix, AZ 85043 (602) 269-7500 --780 Celriver Road Rock Hill, SC 29730 1 800 462-5668 --10280 Camino Santa Fe San Diego, CA 92121 (858) 678-8984 --70 Seaview Drive Secaucus, NJ 07094 (201) 770-1077 --31600 Carter Street Solon, OH 44139 (440) 248-0003 --14290 NW 4th Street Sunrise, FL 33325 (954) 846-9233 --97 Robert Treat Paine Drive Taunton, MA 02780 (508) 880-5600 --33200 Dowe Avenue Union City, CA 94587 (510) 475-1000 Graham Tool Company, Inc. -
Stanley Black & Decker Annual Report 2020
Stanley Black & Decker Annual Report 2020 Form 10-K (NYSE:SWK) Published: February 21st, 2020 PDF generated by stocklight.com UNITED STATES SECURITIES AND EXCHANGE COMMISSION WASHINGTON, D.C. 20549 FORM 10-K ☑ ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 For the fiscal year ended December 28, 2019 or ☐ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 For the transition period from ___________ to ___________ Commission File Number 001-05224 STANLEY BLACK & DECKER, INC. (Exact Name Of Registrant As Specified In Its Charter) Connecticut 06-0548860 (State or Other Jurisdiction of (I.R.S. Employer Incorporation or Organization) Identification Number) 1000 STANLEY DRIVE NEW BRITAIN, CT 06053 (Address of Principal Executive Offices and Zip Code) Registrant’s Telephone Number, Including Area Code 860 225-5111 Securities Registered Pursuant to Section 12(b) of the Act: Title Of Each Class Trading Symbol(s) Name Of Each Exchange on Which Registered Common Stock $2.50 Par Value per Share SWK New York Stock Exchange Corporate Units SWP New York Stock Exchange Corporate Units SWT New York Stock Exchange Securities Registered Pursuant To Section 12(g) Of The Act: None Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes þ No ¨ Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act. Yes ¨ No þ Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports) and (2) has been subject to such filing requirements for the past 90 days. -
Environment Tactical Gloves Designed to Protect and Conceal Wherever Your Mission Takes You
field guide OWN YOUR ENVIRONMENT TACTICAL GLOVES DESIGNED TO PROTECT AND CONCEAL WHEREVER YOUR MISSION TAKES YOU. 3 SHOT-Booklet.indd 3-4 1/7/16 2:39 PM FASTFIT® COVERT MFF-55 Covert black hand protection is designed for law enforcement and special forces operating in mountainous or urban environments. Covert black is not a natural occurring color in nature, but it is an effective color that the brain perceives to provide depth. Mechanix Wear’s Covert black line of gloves provide depth as the eye interprets shadows and breaks up the outline of the user. ELASTIC CUFF SECURE FIT Snug-fitting open cuff with Anatomically designed two- easy on and off flexibility. piece palm eliminates material bunching for an exceptional fit. AVAILABLE AS ORIGINAL® MG-55 COMFORTABLE FIT SEAMLESS PALM Form-fitting TrekDry® Seamless single layer helps keep hands cool palm provides and comfortable. optimal dexterity. AVAILABLE AS ORIGINAL® 0.5mm HMG-55 FIT DEXTERITY Form-fitting finger design AX-Suede™ 0.5mm high- provides precision feel. dexterity palm delivers optimal tactile control. 5 SHOT-Booklet.indd 5-6 1/7/16 2:39 PM ORIGINAL® VENT MGV-55 TOP VENTILATION PALM VENTILATION Form-fitting mesh top lets air in Fully perforated palm keeps for added ventilation. hands cool. M-PACT® MPT-55 KNUCKLE GUARD REINFORCED Impact Guard™ frees the FINGERTIPS index finger and molded Dual-layer internal fingertip Thermal Plastic Rubber construction reinforces the (TPR) disperses impact index finger and thumb. AVAILABLE AS and skin abrasions. M-PACT® FINGERLESS MFL-55 FINGERLESS DESIGN PADDED PALM Fingerless design provides Armortex® aids in maximum dexterity when durability with handling the smallest XRD® impact absorption. -
Big Boyz Toyz Auction Saturday April 22 at 9:30 Am the Johnson Properties Auction Yard
Big Boyz Toyz Auction Saturday April 22 at 9:30 am The Johnson Properties Auction Yard ID # Qty. Description 747 1 ELECTRIC CORD, AIR HOSE 749 1 PARTS MOTORCYCLE 748 1 CASE FOR CHAINSAW, ETC 23 1 TRAILER - NO TITLE 24 1 RAMPS 25 1 PAIR OF JACKS 26 1 GAS CAN ON WHEELS 27 1 CARGO TRAILER - NO TITLE 28 1 EXT. LADDER 29 1 CAMPING KIT 30 4 GROUP OF TIRES 31 1 PUSH LAWN MOWER 32 1 PUSH LAWN MOWER 33 1 CAGE AND STANDS 34 3 DOG BOX 35 5 CAGES 36 1 PET DOOR 37 1 HAY RACK 38 4 CAGES 39 4 CHKN TRANSPORTER 40 2 ROPE 41 1 LUGGAE RACK 42 1 STAINLESS SINK W/ FOOT CONTROLS 43 4 BARRELS 44 1 MANUAL MOWER 45 1 CAST IRON TROUGH 47 1 TIRES 48 1 APPLE PICKER 50 1 FUEL PUMP 51 1 STARTERS 52 2 WIRE 49 1 STAINLESS STEEL SINK 53 1 VENTS AND GABLES 54 2 LAWN CHAIRS 57 1 HOSE 55 1 METAL LAWN CHAIR 56 1 GAS TANK/ CAN 58 1 RABBIT CAGE 59 1 SHUTTERS 62 1 ANTIQUE SHEEP SHEARER - MANUAL CRANK 60 1 COVER FOR PUMP 61 1 DRAINAGE PIPE 1 of 29 4/21/2017 Big Boyz Toyz Auction Saturday April 22 at 9:30 am The Johnson Properties Auction Yard ID # Qty. Description 63 1 AXLE W/ SPRINGS AND 2 TIRES 65 1 BACKS FOR CHAIRS AND GATE 64 1 2PCS WROUGHT IRON FENCING 66 1 PAIR OF LIGHT FIXTURES 67 1 GROUP OF PLASTIC 5&25 GAL JUGS 68 1 HEAVY WATER LINE 69 1 20 GAL DIAPHRAGM PRESSURE TANK 71 1 LIVESTOCK WATER BASIN 76 1 CHRISTAMS GARLAND FOR DOOR 72 1 GROUP OF COUNTER TOPS 73 2 WINDOWS 74 1 OVERHEAD GARAGE DOOR, COMPLETE W/ RAILING 75 2 WINDOWS 77 2 WINDOWS 78 1 WINDOW 780 1 DESKS 781 1 TAIL GATE EXTENDER, COOLERS, ETC 154 1 EXERCISE WEIGHTS 155 4 BOX LOTS - TOOLS, GLOVES, BOLTS 156 1 BOXWOOD -
Hand Tools Market
+44 20 8123 2220 [email protected] Hand Tools Market - Global Outlook and Forecast 2020-2025 https://marketpublishers.com/r/H0D6A08854D7EN.html Date: September 2020 Pages: 312 Price: US$ 3,500.00 (Single User License) ID: H0D6A08854D7EN Abstracts In-depth Analysis and Data-driven Insights on the Impact of COVID-19 Included in this Global Hand Tools Market Report The global hand tools market by revenue is expected to grow at a CAGR of over 4% during the period 2019–2025. The global hand tools market is expected to grow 1.3X times during the forecast period. The market is expected to witness a considerable growth post-2020. Rapid industrialization and increasing applications in household and commercial sectors are primarily driving the market. Automobile, aerospace, construction, electronics, and shipbuilding are the major end-use of these devices. The tool industry landscape is moving toward sophistication and customization that can determine market leadership in a competitive scenario. Advancements in technology and the extensive usage of battery-driven devices have fueled the adoption of cordless power tools and related accessories that are light and durable. This growth factor for the substitutes is expected to challenge the potential of hand tools. The DIY culture can be one of the major drivers for these devices in the coming years with a high scope for penetration in growing economies. The global hand tools market suffered a downfall during the COVID-19 crisis as most economic activities were halted during Q1 and Q2 in 2020. Most major revenue- generating end-users such as construction, automotive, commercial renovation, and home improvement activities were affected, leading to a decline in the market sales. -
Stanley Black and Decker Techtronic Industries Co Ltd (TTI) Chevron
Who Owns What? Andrew Davis May, 2019 This is a redacted version of an article II found on protoolreviews.com. I remember growing up when General Motors offered different brands at different price points (until they all the brands started to overlap before GM collapsed) – Cadillac at the top end, followed by Oldsmobile, Buick, Pontiac, and Chevy. We have a similar situation in woodworking tools (also in kitchen appliances) except that in the case of tools, the multi-brand company is more often a case of acquisitions rather than organic development. Anyway, for those readers interested in the business side of tools, this column, which is a departure from my usual thread, may be of interest. Stanley Black and Decker Stanley Black & Decker (SBD) turned heads when it bought Craftsman Tools in 2017 after Sears closed 235 stores in 2015. Dating back to 1843 with a man named Frederick Stanley, the company merged in 2010 with Black and Decker. As of 2017, the company maintains a $7.5 billion business in tools & storage alone. SBD brands include: DeWalt Stanley Black + Decker Bostitch Craftsman Vidmar Mac Tools Irwin Lenox Proto Porter-Cable Powers Fasteners Lista Sidchrome Emglo USAG Techtronic Industries Co Ltd (TTI) TTI owns Milwaukee Tool and a host of other power tool companies. It also licenses the RIDGID and RYOBI names for cordless power tools (Emerson actually owns RIDGID and makes the red tools). Founded in 1985 in Hong Kong, TTI sells tools all over the world and employs over 22,000 people. TTI had worldwide annual sales of over US$6 billion in 2017. -
SBA Franchise Directory Effective March 31, 2020
SBA Franchise Directory Effective March 31, 2020 SBA SBA FRANCHISE FRANCHISE IS AN SBA IDENTIFIER IDENTIFIER MEETS FTC ADDENDUM SBA ADDENDUM ‐ NEGOTIATED CODE Start CODE BRAND DEFINITION? NEEDED? Form 2462 ADDENDUM Date NOTES When the real estate where the franchise business is located will secure the SBA‐guaranteed loan, the Collateral Assignment of Lease and Lease S3606 #The Cheat Meal Headquarters by Brothers Bruno Pizza Y Y Y N 10/23/2018 Addendum may not be executed. S2860 (ART) Art Recovery Technologies Y Y Y N 04/04/2018 S0001 1‐800 Dryclean Y Y Y N 10/01/2017 S2022 1‐800 Packouts Y Y Y N 10/01/2017 S0002 1‐800 Water Damage Y Y Y N 10/01/2017 S0003 1‐800‐DRYCARPET Y Y Y N 10/01/2017 S0004 1‐800‐Flowers.com Y Y Y 10/01/2017 S0005 1‐800‐GOT‐JUNK? Y Y Y 10/01/2017 Lender/CDC must ensure they secure the appropriate lien position on all S3493 1‐800‐JUNKPRO Y Y Y N 09/10/2018 collateral in accordance with SOP 50 10. S0006 1‐800‐PACK‐RAT Y Y Y N 10/01/2017 S3651 1‐800‐PLUMBER Y Y Y N 11/06/2018 S0007 1‐800‐Radiator & A/C Y Y Y 10/01/2017 1.800.Vending Purchase Agreement N N 06/11/2019 S0008 10/MINUTE MANICURE/10 MINUTE MANICURE Y Y Y N 10/01/2017 1. When the real estate where the franchise business is located will secure the SBA‐guaranteed loan, the Addendum to Lease may not be executed. -
Boat Mechanic Snap-On; MAC Tool Shop Liquidation (September 11)
09/24/21 04:21:21 Boat Mechanic Snap-On; MAC Tool Shop Liquidation (September 11) Auction Opens: Fri, Sep 5 7:00am PT Auction Closes: Thu, Sep 11 6:30pm PT Lot Title Lot Title WC2270 Tool WC2303 Various Tool Items WC2271 Hacksaw - 2 WC2304 Tool WC2272 Tool Parts WC2305 Handheld Tools WC2273 Tools WC2307 Handheld Tools WC2274 Tool Bits WC2308 Tools WC2275 Hacksaw - 2 WC2309 Tools WC2276 Hacksaw - 2 WC2310 Tool Kit - 1 package WC2277 Hacksaw - 2 WC2311 Knife Tools WC2278 Blades WC2312 Knives WC2279 Blades WC2313 Tools WC2280 Tool Items with Blades WC2314 Tools WC2281 Tool Items - 8 WC2315 Grinding Discs WC2282 Tool Bar Items WC2316 Long Shaft Electrical Die Grinder WC2283 Various Tools WC2317 Long Shaft Electrical Die Grinder WC2284 Tool Bar Items WC2318 Various Tool Bits WC2285 Tools WC2321 Tools - 2 WC2286 Simonds Tool WC2322 Tool WC2287 Tools WC2323 Blue Tool Items WC2288 Tools WC2324 Tools Bits in Red Case WC2289 Handheld Flathead Tools WC2325 Tool Bits in Bottle WC2290 Lincoln Tool WC2326 Tool Bits in Bottle WC2291 Euro Tool Flat Files WC2327 Tool Bits in Bottle WC2292 Ace Tool WC2328 Tool Bits in Bottle WC2293 Handheld Tools WC2329 Tool Bits in Bottle WC2294 Pittsburgh Tool WC2330 Tool Bits in Bottle WC2295 Handheld Flat Tools WC2331 Tool Bits in Bottle WC2296 various Flathead Tools WC2332 Tool Bits in Bottle WC2297 Tool WC2333 Tool Bits in Bottle WC2298 Euro Tool Flat Files WC2334 Tool Bits in Bottle WC2299 Handheld Flathead Tools WC2335 Tool Bits in Bottle WC2300 Tools WC2336 Tool Bits in Bottle WC2301 Tool and Case WC2337 Tool