Energy Science and Applied Technology
Total Page：16
File Type：pdf, Size：1020Kb
Editor Fang Energy Science and Applied Technology Editor: Zhigang Fang and Applied Technology Energy Science Energy Science and Applied Technology includes contributions on a wide range of topics: - Technologies in geology, mining, oil and gas exploration and exploitation of deposits - Energy transfer and conversion, materials and chemical technologies - Environmental engineering and sustainable development - Electrical and electronic technology, power system engineering - Mechanical, manufacturing, process engineering - Control and automation - Communications and applied information technologies - Applied and computational mathematics - Methods and algorithms optimization - Network technology and application - System test, diagnosis, detection and monitoring - Recognition, video and image processing The book will be much of interest to academics and engineers involved in energy and applied sciences. an informa business ENERGY SCIENCE AND APPLIED TECHNOLOGY EESAT2015_FM.inddSAT2015_FM.indd i 110/6/20150/6/2015 22:57:51:57:51 PPMM This page intentionally left blank PROCEEDINGS OF THE 2ND INTERNATIONAL CONFERENCE ON ENERGY SCIENCE AND APPLIED TECHNOLOGY, (ESAT 2015), WUHAN, CHINA, 28–30 AUGUST 2015 Energy Science and Applied Technology Editor Zhigang Fang Wuhan University of Technology, Wuhan, Hubei, China ESAT2015_FM.indd iii 10/13/2015 7:14:36 AM CRC Press/Balkema is an imprint of the Taylor & Francis Group, an informa business © 2016 Taylor & Francis Group, London, UK Typeset by V Publishing Solutions Pvt Ltd., Chennai, India Printed and bound in Great Britain by CPI Group (UK) Ltd, Croydon, CR0 4YY All rights reserved. No part of this publication or the information contained herein may be repro- duced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, by photocopying, recording or otherwise, without written prior permission from the publisher. Although all care is taken to ensure integrity and the quality of this publication and the information herein, no responsibility is assumed by the publishers nor the author for any damage to the property or persons as a result of operation or use of this publication and/or the information contained herein. Published by: CRC Press/Balkema P.O. Box 11320, 2301 EH Leiden, The Netherlands e-mail: [email protected] www.crcpress.com – www.taylorandfrancis.com ISBN: 978-1-138-02833-3 (Hbk) ISBN: 978-1-315-68095-8 (eBook PDF) EESAT2015_FM.inddSAT2015_FM.indd iivv 110/6/20150/6/2015 22:57:52:57:52 PPMM Energy Science and Applied Technology – Fang (Ed.) © 2016 Taylor & Francis Group, London, ISBN 978-1-138-02833-3 Table of contents Preface xi Committees xiii Sponsors xv Technologies in geology, mining, oil and gas exploration and exploitation of deposits Reinforcing polyamide 1212 via graphene oxide 3 Z. Cai, X. Meng, Y. Han, Q. Zhou & L. Cui Analysis of horizontal seepage prevention based on three-dimensional finite element method 7 L. Qiu, L. Zhang, R. Zhou, Z. Shen & L. Yang Renewable energy, bio-energy and cell technologies New digital graphics tablet based on solar energy and cloud storage 13 Z. Wang SOC estimation of lithium-ion battery using adaptive extended Kalman filter based on maximum likelihood criterion 17 X. Dang, K. Xu, H. Jiang, X. Zhang, X. Wu & L. Yan SOC estimation strategy based on online feed-forward compensation for lithium-ion battery 23 X. Dang, Y. Mo, H. Jiang, X. Wu & X. Zhang A kind of distributed seawater desalination generation system 31 L. Liu Energy transfer and conversion, materials and chemical technologies Separation of flavonoids from kudzu root extract using poly (vinylidene fluoride) ultrafiltration membranes 37 H. Xiang, H. Wang, L. Zeng, S. Wang & X. Wei Preparation and characterization of Cr2O3–TiO2–Co2O3–ZnO green pigment 43 L. Chen, X.L. Weng, L.J. Deng & L. Yuan The development of tensioner for automated fiber placement 47 Z. Jin, Z. Wang, H. Su, C. Yuan & Maliya Erbium-doped Na2O-ZnO-MoO3-TeO2 glasses 51 J. Li, S.Q. Man, Q.R. Zhao & N. Zhang Energy transfer of the Airy pulse during nonlinear propagation in the presence of high-order effects 55 N. Mei & X. Fu Simulation and experimental validation of mass loss induced by vacuum ultraviolet irradiation on polymer materials 59 Y. Wang, X. Guo, X.R. Wang, S.S. Yang & X.J. Wang Solar irradiance interval prediction based on set pair analysis theory 65 C. Du & Z.Q. Liu v EESAT2015_FM.inddSAT2015_FM.indd v 110/6/20150/6/2015 22:57:52:57:52 PPMM H2O2 electrocatalytic reduction on Pd/SiC catalyst 69 C.P. Han, Y.R. Bao, L.M. Sun & Z.R. Liu Investigation on characteristic of high-frequency impulse water chain formation process under surfactant systems 73 Y. Fan, B. Li, Z. Sun & Z. Wang The optimization of ultrasonic-assisted extraction technology of rosmarinic acid from Prunella vulgaris L. by the response surface method 79 T. Long & Y. Lou Environmental engineering and sustainable development Research on the hydrological effects of forest litter-fall 85 J.H. Zhang, X. Hou & Q.S. Shu Life cycle assessment on Battery Electric Vehicles 89 Y. Zhang, Y. Liao, G. Liu, S. Hu, X. Ma, R. Yang & J. He Analysis and evaluation of the navigation risk of offshore wind project 95 Y.B. Guo, F.C. Jiang & H.B. Zou A comparison research on pollution index between thermal power generation and solar power generation 99 J. Huang, X. Wang, X. Mao & L. Li Electrical and electronic technology, power system engineering ADS-based design and simulation of power divider 105 L. Han, J. Fan & C. Zheng Sensorless control of permanent magnet synchronous motor based on hybrid strategy position estimation 109 C. Yu & B. Tao Novel analysis and design of rectifier for wireless power transmission 115 Q. Zhang, X. Liang, Y. Xu, X. Lu & H. Tan The sensitive mapping of memories in microprocessor 123 Y. Zhao, C. Yu, L. Fan, S. Yue, M. Chen & H. Zheng Portable refrigerator design 127 Z.S. Wang & W.X. Xu Development of an electromagnetic microswitch based on non-silicon microfabrication 131 X.D. Miao & Y. Dong Research on two kinds of ultrasonic sensor array fixtures and design 135 M. Zhao, G. Tong & X. Wang The research based on the design of the electronic control unit of uc/os II engine 139 G.P. Qi Mechanical, manufacturing, process engineering CFD simulated engineering model of biodiesel synthesis in a spinning disk reactor 145 Z. Wen Numerical simulation on the stability in cutting nickel-based super alloy GH4169 149 J.J. Liu & G.W. Wang Transient dynamics analysis for structure of the airborne evaporation cycle system 153 Y. Guo, Y. Zhang & M. Cheng Transverse stress analyses of columns constrained by rebar under local compression 157 Y. Wang vi EESAT2015_FM.inddSAT2015_FM.indd vvii 110/6/20150/6/2015 22:57:52:57:52 PPMM Numerical simulation of grinding ball of kainite ductile iron in oil quenching and isothermal tempering 161 W.R. Wang, B. Qu & D.Q. Wei Shape design and motion analysis of underwater glider 167 Q. Zhao, T. Yan & B. He Analysis of internal flow field of OTS 125–500A low flow rate double-suction centrifugal pump 173 W. Yuan, C. Wang, K. Zhang & X. Chen Performance analysis of the ISD suspension based on a whole vehicle model involving the steering condition 179 X. Yang, Y. Shen, Y. Liu & J. Yang Study on the quantitative measurement of the tempering martensite for a carbon steel by thermal expansion 185 Y. Xue, K. Liu, K. Chen & H. Chen NVH optimization study based on concept car body 189 Y. Zhang, Y. Cao & J. Hu Influence of charge weight on ablation ability of combustion agent 195 Q. Zhang, J. Li, Z. An & X. Cui Simulation analysis of vibration-impact invalidation of low voltage apparatus part 199 X.D. Miao, B. Zhang & Y. Huang Optimization of beam structure on the baler 203 Z. Hong, Y. He & Z. Meng Design of a long straight elbow pipe welding machine 207 C. Gong & D. Luo Control and automation Cooperative control for multiple coordinated mobile robots 213 N. Zhao, J.L. Liu & J. Yuan Design of smart home wireless terminal control system based on ARM and ZigBee 217 F.L. Zhang, H. He & Z.H. Zhang Lubricating oil automatic filter based on high gradient magnetic field 221 F. Wang, Y. Li & Q. Guo A preliminary study on the soft landing trajectory design and control strategy of Chang’e 3 225 L. Zhang Research on low power control technology of EM-MWD downhole instrument 231 C. Zhang & H. Dong Communications and applied information technologies Performance study of efficient modulation technique to satellite broadband communication system 237 Z.K. Li, Y.H. Pan & B. Shang Performance investigation of blind equalization and frequency offset estimation scheme in optical coherent MSK system 243 L. Yan, J. He, M. Chen, J. Tang & L. Chen Software-defined vehicular networks: Opportunities and challenges 247 M. Zhu, Z.P. Cai, M. Xu & J.N. Cao Research on management information system: A novel approach 253 Y. Li Deceptive jamming suppression method for LFM fuze based on STFRFT 257 P. Nian, G. Li & F. Li vii EESAT2015_FM.inddSAT2015_FM.indd vviiii 110/6/20150/6/2015 22:57:52:57:52 PPMM Research of an envisioned smart doorbell 261 Y. Zhang, M. Xia & B. Yu Intelligent Compressive Sensing with adaptive observations 267 J.B. Xu & S.W. Zhou Enhancing reliable time-triggered data transmission for safety critical tasks in TTEthernet 273 W.J. Zha, F. Hu & H.P. Chen The design and application of data disaster recovery based on IPSec VPN 281 B. Liu, W. Wang & W. Li Applied and computational mathematics Analysis of the numerical properties of LOD-FDTD method with arbitrary-order in space 287 M. Su & P. Liu Influence of nonlinear phase on the linear propagation of partial-coherent Airy beam 291 Y.