2_Seating_Master_Cover_Toc.qxd 12/24/2013 11:46 AM Page 1

Y Price Book

Prices effective February 3, 2014 Aeron® Chairs

Introduction page 2 Aeron® Chairs 3 Work Chair 5 Work Stool 8 Side Chair 11 Accessories 12 Appendices 20-Day or Less/Assigned Lead-Time Order Information Casters and Glides Size/Fit Reference - Aeron Chair Fire Retardancy-Seating Customer’s Own Material/Customer’s Own Leather Order Information-Seating Open Line Textiles Application Chart-Seating Open Line Textile Colors-Seating Proprietary Textiles Application Chart-Seating Proprietary Textile Colors-Seating For the latest materials information, refer to the Materials pages on HermanMiller.com. PB_AER

Z Aeron® Chairs Price Book (2/14) 1 2_Seating_Master_Cover_Toc.qxd 12/24/2013 11:46 AM Page 2

Introduction

A Note on the Organization of This Book General Information There are a few signals that will help you understand the organization This book is effective February 3, 2014, subject to change without of this book. Once you know them, you should be able to find your way notice. Products may be purchased from authorized Herman Miller deal- around easily. ers who will quote prices upon request. For more information about our products and services or to see a list of dealers, visit Like a newspaper, this book is formatted with columns of text www.HermanMiller.com. and illustrations that run vertically. All prices are list prices. Additional services, such as planning Information wraps from one column to the next and continues for as services, design, storage, and installation, are not included and must many pages as it needs to. be added to these prices when the additional services are requested. Illustrations, specifications, and prices are based on the latest Black bars are clues. information at the time of publication. The right is reserved to make A black bar at the top of a page signals the start of information about a changes at any time without notice in prices, fabrics, finishes, materi- product. als, specifications, and models, and also to discontinue models and fin- This information is divided into two sections, each signaled by a ishes. black bar. Product Information includes a description, additional notes, Dimensions shown in the drawings are engineering drawing dimen- and dimensional drawings. Specification Information, which always sions rounded up to the nearest 1/8". Product is shipped set begins at the top of a column, includes a series of steps. Each step rep- up or knocked down. Products that include “Shipped knocked down” resents a decision you need to make in order to complete your product in the description require some assembly. If this statement does not number. Steps must be followed sequentially. The number of pages appear in the description, the product is shipped assembled. needed to complete information on a product varies; some will be com- Service problems are normally handled by a Herman Miller plete in one page; others may fill three or four pages. Just continue authorized dealer. Where this cannot be accomplished on a local going through the steps until you run into the next product, signaled by level, service problems should be referred to the Customer Care the black bar at the top of the page. Representative for your region, Herman Miller, Inc., Zeeland, Michigan Black tabs running along the outside edge of the page help you 49464. locate what section you are in or what section you want to go to. You can thumb forwards or backwards to find a section; tabs and text 20-Day or Less/Assigned Lead-Time Shipments appear on both sides of the page. All products and options in this price book not designated by an The additional pages in the back of the book include the appendices Assigned Program icon A will ship in 20 business days or less after and indices. They are signaled by a long black bar running along the being acknowledged by Herman Miller. outside edge of the page. Products and options designated by an A are on the assigned lead- time program and may ship in 20 days, less than 20 days, or more than The index is presented two ways. 20 days from order acknowledgement. The first index is in alphabetical order by product name. It can be help- ful if you are new to the products and numbering scheme or if you are looking for a type of product, such as work chair or round table. The second index is by product number. It lists, in alphanumeric order, the base product number, typically a five-digit number.

2 Aeron® Chairs Price Book (2/14) HermanMiller Aeron_PrIncr_HMI Prototype 20090107.qxd 12/23/2013 4:02 PM Page 3

Aeron® Chairs

Work Chair

Work Stool

Side Chair

Accessories

HermanMiller Aeron® Chairs Price Book (2/14) 3 Aeron_PrIncr_HMI Prototype 20090107.qxd 12/23/2013 4:02 PM Page 4

4 Aeron® Chairs Price Book (2/14) HermanMiller Aeron_PrIncr_HMI Prototype 20090107.qxd 12/23/2013 4:02 PM Page 5

Work Chair AE111! AE112! AE113! ===

Aeron® Work Chair Product Information Dimensions Description This chair has 3 sizes and a Pellicle® material that conforms to the user’s body and retains its original shape when unoccupied. The material is lightweight and breathable and distributes the user’s weight evenly over the seat and back of the chair. The chair has pneumatic height adjustment and a Kinemat® tilt that lets the body naturally pivot at the ankles, knees, and hips. Tilt options include a tilt limiter that allows the user to select the tilt range to limit the amount of recline; a tilt limiter and seat angle that allows the user to select the tilt range and a horizontal or 5° forward seat angle; or a standard tilt. Back-support options include PostureFit® support and an adjustable lumbar support. The PostureFit support provides a custom fit in the lower back area, below the beltline, that helps achieve healthier posture and improved lower back comfort. The user can adjust the level of support with a lever. Arm choices include a fixed, nonadjustable option; a height-adjustable option that moves the arms 4" vertically; and a fully adjustable option that moves the arms 4" vertically and pivots the armpads 15° outward 1 and 17 /2° inward. The ZB, WS, and G8 base/frame finishes include a frame applique. These appliques are applied to an Aeron work chair’s seat, back, and arms to minimize the effect of contact between the chair and a wood- edge surface. The G8 option does not include an arm coating. The frame applique options (ZB, WS, and G8) do not meet CAL 133 requirements. A fire retardant chair meets CAL 133 requirements. The chair’s Pellicle material is manufactured with a fire-retardant additive.

Notes To help determine chair size, see Aeron Chair Size/Fit Reference in Appendices. A-, B-, and C-size chairs are tested and warranted for use by persons 300 pounds and under. For information on casters and glides, see Casters and Glides in Appendices. PostureFit support is not available on standard tilt option. Customer’s Own Leather (COL) can be applied to armpads; requires 4 square feet. See Order Information in Appendices.

HermanMiller Aeron® Chairs Price Book (2/14) 5 Aeron_PrIncr_HMI Prototype 20090107.qxd 12/23/2013 4:02 PM Page 6

Work Chair continued === Specification Information HW $1253 1253 1253 1253 1253 1253 Step 1. F $1300 1300 1300 1300 1300 1300 AE11 AW $1331 1331 1331 1331 1331 1331 F $1381 1381 1381 1381 1381 1381 Step 2. Tilt Aeron® Work Chair Work Aeron® 1 standard tilt AE113 NN $1120 1120 1120 1120 1120 1120 2 tilt limiter PW $1253 1253 1253 1253 1253 1253 3 tilt limiter and seat angle F $1300 1300 1300 1300 1300 1300 HW $1320 1320 1320 1320 1320 1320 Step 3. Arms F $1368 1368 1368 1368 1368 1368 N no arms AW $1401 1401 1401 1401 1401 1401 P fixed arms F $1448 1448 1448 1448 1448 1448 H height-adjustable arms A fully adjustable arms Step 7. Back Support Option

Step 4. Armpad Upholstery For standard tilt (1) N2 no additional support +$0 For no arms (N) AJ adjustable lumbar support +$65 N no arms For tilt limiter (2) or tilt limiter and seat angle (3) For fixed arms (P), height-adjustable arms (H), or fully adjustable arms N2 no additional support +$0 (A) AJ adjustable lumbar support +$65 W nonupholstered armpads PJ adjustable PostureFit® support +$95 F leather armpads Step 8. Base/Frame Finish Step 5. Size A a size For not fire retardant (*) B b size G1 graphite +$0 C c size XT titanium with smoke frame +$0 WS titanium with smoke frame and smoke applique +$134 Step 6. Fire Retardancy ZB graphite with graphite applique +$134 For not fire retardant (*), skip this step. CD polished aluminum with graphite frame +$300 FR fire retardant A G8 polished aluminum with graphite frame and graphite +$434 applique A Prices for Steps 1-6. A* AFR B* BFR C* CFR For fire retardant (FR) AE111 NN $991 991 991 991 991 991 G1 graphite +$0 PW $1125 1125 1125 1125 1125 1125 CD polished aluminum with graphite frame A +$300 F $1173 1173 1173 1173 1173 1173 HW $1191 1191 1191 1191 1191 1191 Step 9. Casters/Glides 1 F $1240 1240 1240 1240 1240 1240 BB 2 /2" hard caster, black yoke, carpet +$0 1 AW $1269 1269 1269 1269 1269 1269 GF 2 /2" glide, hard floors or carpet +$0 1 F $1318 1318 1318 1318 1318 1318 C7 2 /2" caster, black yoke, hard floors or carpet +$40 1 C9 2 /2" braking caster, black yoke, hard floors or carpet +$40 AE112 NN $1052 1052 1052 1052 1052 1052 PW $1186 1186 1186 1186 1186 1186 F $1234 1234 1234 1234 1234 1234

6 Aeron® Chairs Price Book (2/14) HermanMiller Aeron_PrIncr_HMI Prototype 20090107.qxd 12/23/2013 4:02 PM Page 7

Work Chair continued === Aeron® Work Chair Step 10. Armpad Finish

For nonupholstered armpads (W) with not fire retardant, or fire retardant (FR) with graphite (G1), or polished aluminum with graphite frame (CD), or graphite with graphite applique (ZB), or polished aluminum with graphite frame and graphite applique (G8) BK black +$0

For nonupholstered armpads (W) with not fire retardant with titanium with smoke frame (XT), or titanium with smoke frame and smoke applique (WS) S8 smoke +$0

Step 11. Pellicle® Material See application chart and textiles list for material usage and numbers. First 2 digits of number indicate material; remaining 2 digits indicate color.

For fire retardant (FR) with graphite (G1), or polished aluminum with graphite frame (CD) Price Category 1 +$0

For not fire retardant (*) Price Category 1 +$0 Price Category 2 +$28

Step 12. Armpad Leather For fixed arms (P), height-adjustable arms (H), or fully adjustable arms (A) with leather armpads (F) See application chart and textiles list for fabric usage and numbers. First 2 digits of number indicate fabric line; remaining digit(s) indicate fabric color. Price Category 7 A +$0 Price Category 9 +$75

HermanMiller Aeron® Chairs Price Book (2/14) 7 Aeron_PrIncr_HMI Prototype 20090107.qxd 12/23/2013 4:02 PM Page 8

Work Stool AE711! AE712! AE713! AE721! AE722! AE723!

Product Information Customer’s Own Leather (COL) can be applied to armpads; requires 4 Description square feet. See Order Information in Appendices. This work stool has a Fine-Tune™ footring mechanism that allows the ======user to adjust the height of the footring from a seated position and Dimensions reduces the pressure on the underside of the user’s thighs. It has a 5- star base, pneumatic seat-height adjustment, and 2 height options. The 1 low stool has a seat-height range of 24 /2" to 29" with a Fine-Tune 1 1 footring that adjusts 2 /2" (from 15" to 17 /2" from the seat). The high Aeron® Work Stool Work Aeron® 1 stool has a seat-height range of 27 /2" to 34" with a Fine-Tune footring 1 1 that adjusts 5 /2" (from 15" to 20 /2" from the seat). The high stool provides a wider range of height adjustment than does the low stool. The work stool is available in size B. The stool has a Pellicle® material that conforms to the user’s body and retains its original shape when unoccupied. The material is lightweight and breathable and distributes the user’s weight evenly over the seat and back of the stool. The stool’s Kinemat® tilt lets the body naturally pivot at the ankles, knees, and hips. Tilt options include a tilt limiter that allows the user to select the tilt range to limit the amount of recline; a tilt limiter and seat angle that allows the user to select the tilt range and a horizontal or 5° forward seat angle; or a standard tilt. Back-support options include PostureFit® support and an adjustable lumbar support. The PostureFit support provides a custom fit in the lower back area, below the beltline, that helps achieve healthier posture and improved lower back comfort. The user can adjust the level of support with a lever. Arm choices include a fixed, nonadjustable option; a height-adjustable option that moves the arms 4" vertically; and a fully adjustable option that moves the arms 4" vertically and pivots the armpads 15° outward 1 and 17 /2° inward. The ZB, WS, and G8 options include a frame applique. These appliques are applied to an Aeron work stool’s seat, back, and arms to minimize the effect of contact between the stool and a wood-edge surface. The G8 option does not include an arm coating. The work stool and the frame applique options (ZB, WS, and G8) do not meet CAL 133 requirements. The fire retardant work stool meets CAL 133 requirements. The Pellicle material is manufactured with a fire-retardant additive.

Notes Work stools are tested and warranted for use by persons 300 pounds and under. For information on casters and glides, see Casters and Glides in Appendices. Fine-Tune footring’s polymer cover matches the frame finish. PostureFit support is not available on standard tilt option.

8 Aeron® Chairs Price Book (2/14) HermanMiller Aeron_PrIncr_HMI Prototype 20090107.qxd 12/23/2013 4:02 PM Page 9

Work Stool continued ======

Specification Information P WB $1558 1558 1558 1936 1936 Step 1. FB $1606 1606 1606 1984 1984 AE7 H WB $1625 1625 1625 2004 2004 Aeron® Work Stool FB $1673 1673 1673 2053 2053 Step 2. Height A WB $1716 1716 1716 2106 2106 1 low FB $1765 1765 1765 2156 2156 2 high AE712 N NB $1485 1485 1485 1865 1865 Step 3. Tilt P WB $1619 1619 1619 1999 1999 1 standard tilt FB $1667 1667 1667 2047 2047 2 tilt limiter H WB $1686 1686 1686 2065 2065 3 tilt limiter and seat angle FB $1734 1734 1734 2113 2113 A WB $1777 1777 1777 2169 2169 Step 4. Arms FB $1828 1828 1828 2219 2219 N no arms P fixed arms AE713 N NB $1552 1552 1552 1931 1931 H height-adjustable arms P WB $1686 1686 1686 2065 2065 A fully adjustable arms FB $1734 1734 1734 2113 2113 H WB $1753 1753 1753 2132 2132 Step 5. Armpad Upholstery FB $1801 1801 1801 2180 2180 A WB $1849 1849 1849 2239 2239 For no arms (N) FB $1896 1896 1896 2288 2288 NB no arms AE721 N NB $1509 1509 1509 1888 1888 For fixed arms (P), height-adjustable arms (H), or fully adjustable arms P WB $1642 1642 1642 2022 2022 (A) FB $1691 1691 1691 2070 2070 WB nonupholstered armpads H WB $1710 1710 1710 2088 2088 FB leather armpads FB $1759 1759 1759 2137 2137 A WB $1803 1803 1803 2195 2195 Step 6. Base/Frame Finish FB $1854 1854 1854 2245 2245 G1 graphite base/frame XT titanium base with smoke frame AE722 N NB $1570 1570 1570 1949 1949 CD polished aluminum base with graphite frame A P WB $1705 1705 1705 2083 2083 FB $1753 1753 1753 2132 2132 Step 7. Fire Retardancy H WB $1771 1771 1771 2150 2150 For not fire retardant (*), skip this step. FB $1820 1820 1820 2199 2199 A WB $1867 1867 1867 2258 2258 For graphite base/frame (G1) or polished aluminum base with graphite FB $1917 1917 1917 2309 2309 frame (CD) FR fire retardant A AE723 N NB $1637 1637 1637 2016 2016 P WB $1771 1771 1771 2150 2150 For titanium base with smoke frame (XT), skip this step. FB $1820 1820 1820 2199 2199 H WB $1837 1837 1837 2216 2216 Prices for Steps 1-7. FB $1887 1887 1887 2266 2266 G1* G1FR XT* CD* CDFR A WB $1934 1934 1934 2325 2325 AE711 N NB $1424 1424 1424 1803 1803 FB $1986 1986 1986 2377 2377

HermanMiller Aeron® Chairs Price Book (2/14) 9 Aeron_PrIncr_HMI Prototype 20090107.qxd 12/23/2013 4:02 PM Page 10

Work Stool continued

Step 8. Back Support Option Step 12. Pellicle® Material See application chart and textiles list for material usage and numbers. For standard tilt (1) First 2 digits of number indicate material; remaining 2 digits indicate ======N2 no additional support +$0 color. AJ adjustable lumbar support +$65 For not fire retardant (*) For tilt limiter (2) or tilt limiter and seat angle (3) Price Category 1 +$0 N2 no additional support +$0 Price Category 2 +$28 Aeron® Work Stool Work Aeron® AJ adjustable lumbar support +$65 PJ adjustable PostureFit® support +$95 For graphite base/frame (G1) or polished aluminum base with graphite frame (CD) with fire retardant (FR) Step 9. Frame Applique Price Category 1 +$0

For graphite base/frame (G1) Step 13. Armpad Leather NN none +$0 For fixed arms (P), height-adjustable arms (H), or fully adjustable arms ZB graphite with graphite applique +$134 (A) with leather armpads (FB) See application chart and textiles list for fabric usage and numbers. For titanium base with smoke frame (XT) First 2 digits of number indicate fabric line; remaining digit(s) indicate NN none +$0 fabric color. WS titanium with smoke frame and smoke applique +$134 Price Category 7 A +$0 Price Category 9 +$75 For polished aluminum base with graphite frame (CD) NN none +$0 G8 polished aluminum with graphite frame and graphite +$134 applique A

Step 10. Casters/Glides 1 BB 2 /2" hard caster, black yoke, carpet +$0 1 GF 2 /2" glide, hard floors or carpet +$0 1 C7 2 /2" caster, black yoke, hard floors or carpet +$40 1 C9 2 /2" braking caster, black yoke, hard floors or carpet +$40

Step 11. Armpad Finish

For nonupholstered armpads (WB) with graphite base/frame (G1), or polished aluminum base with graphite frame (CD) BK black +$0

For nonupholstered armpads (WB) with titanium base with smoke frame (XT) S8 smoke +$0

10 Aeron® Chairs Price Book (2/14) HermanMiller Aeron_PrIncr_HMI Prototype 20090107.qxd 12/23/2013 4:02 PM Page 11

Side Chair AE500! ======

Product Information Specification Information Description Step 1. This side chair has a Pellicle® material that conforms to the user’s body AE500P and retains its original shape when unoccupied. The material is lightweight and breathable and distributes the user’s weight evenly Step 2. Fire Retardancy over the seat and back of the chair. The chair has a sled base and fixed For not fire retardant (*), skip this step. Aeron® Side Chair arms. It can be specified with optional lumbar support and with optional FR fire retardant A sled-base glides. The chair’s size is based on the B-size Aeron work chair. Prices for Steps 1-2. A fire retardant chair meets CAL 133 requirements. The chair’s Pellicle AE500P $813 material is manufactured with a fire-retardant additive. The additive AE500P FR $813 does not meet Herman Miller’s Design for the Environment criteria. Step 3. Lumbar Option Notes N2 no lumbar +$0 Side chair is tested and warranted for use by persons 300 pounds and AJ adjustable +$65 under. For information on glides, see Casters and Glides in Appendices. Step 4. Base/Frame Finish

Dimensions For not fire retardant G1 graphite +$0 XT titanium with smoke frame +$0

For fire retardant (FR) G1 graphite A +$0

Step 5. Glide Option NX no glide +$0 SB sled-base glide +$15

Step 6. Pellicle® Material See application chart and textiles list for material usage and numbers. First 2 digits of number indicate material; remaining 2 digits indicate color.

For fire retardant (FR) with no glide (NX), or sled-base glide (SB) Price Category 1 +$0

For not fire retardant (*) with graphite (G1) Price Category 1 +$0 Price Category 2 +$28

HermanMiller Aeron® Chairs Price Book (2/14) 11 Aeron_PrIncr_HMI Prototype 20090107.qxd 12/23/2013 4:02 PM Page 12

PostureFit® Support AE905!

Product Information Specification Information Description Step 1. This PostureFit® support fits on the back of an A-, B-, or C-size Aeron AE905 work chair or B-size Aeron work stool. It provides a custom fit in the lower back area, below the beltline, that helps achieve healthier posture Step 2. Size and improved lower back comfort. The user can adjust the level of A a size support with a lever. B b size Graphite (G1) finish is recommended for use with the following chair or C c size stool base/frame finishes: ======• Graphite (G1) Prices for Steps 1-2. • Graphite with graphite applique (ZB) AE905 A $110 • Polished aluminum with graphite frame (CD) B $110 • Polished aluminum with graphite frame and graphite applique (G8) C $110 Smoke (S8) finish is recommended for use with the following chair or

Aeron® Accessories Aeron® stool base/frame finishes: Step 3. Finish • Titanium with smoke frame (XT) G1 graphite +$0 • Titanium with smoke frame and smoke applique (WS) S8 smoke +$0

Notes Existing Aeron chair should include the tilt limiter option (tilt option 2 or 3) for optimal performance.

12 Aeron® Chairs Price Book (2/14) HermanMiller Aeron_PrIncr_HMI Prototype 20090107.qxd 12/23/2013 4:02 PM Page 13

Lumbar Kit AE900! ======

Product Information Specification Information Description Step 1. This lumbar pad fits into the back of an Aeron work chair or work stool AE900NN to further support the lower back. The pad can be reversed to adjust for 3 1 more or less support; one side of the pad is /4" and the other is 1 /4". Step 2. Size Black (BK) lumbar pad finish is recommended for use with the following A a size chair or stool base/frame finishes: B b size • Graphite (G1) C c size • Graphite with graphite applique (ZB) Aeron® Accessories • Polished aluminum with graphite frame (CD) Prices for Steps 1-2. • Polished aluminum with graphite frame and graphite applique (G8) AE900NN A $77 Smoke (S8) lumbar pad finish is recommended for use with the B $77 following chair or stool base/frame finishes: C $77 • Titanium with smoke frame (XT) • Titanium with smoke frame and smoke applique (WS) Step 3. Finish BK black +$0 Notes S8 smoke +$0 Specify lumbar pad size to match work chair size. For work stool, specify size B.

HermanMiller Aeron® Chairs Price Book (2/14) 13 Aeron_PrIncr_HMI Prototype 20090107.qxd 12/23/2013 4:02 PM Page 14

Arm Kit AE900!

Product Information Specification Information Description Step 1. These arms can be retrofit to an Aeron work chair or work stool. Arm AE900 choices include a height-adjustable option that moves the arms 4" vertically and a fully adjustable option that moves the arms 4" vertically Step 2. Arms 1 and pivots the armpads 15° outward and 17 /2° inward. Arm components P fixed arms are preassembled. H height-adjustable arms A fully adjustable arms Notes ======Customer’s Own Leather (COL) requires 4 square feet. See Order Step 3. Armpad Upholstery Information in Appendices. W0 nonupholstered armpads F0 leather armpads Dimensions Prices for Steps 1-3.

Aeron® Accessories Aeron® W0 F0 AE900 P $137 185 H $256 303 A $302 350

Step 4. Finish G1 graphite +$0 XT titanium +$0 CD polished aluminum A +$100

Step 5. Armpad Finish

For nonupholstered armpads (W0) with graphite (G1), or polished aluminum (CD) BK black +$0

For nonupholstered armpads (W0) with titanium (XT) S8 smoke +$0

Step 6. Armpad Leather For leather armpads (F0) See application chart and textiles list for fabric usage and numbers. First 2 digits of number indicate fabric line; remaining digit(s) indicate fabric color. Price Category 7 A +$0 Price Category 9 +$75

14 Aeron® Chairs Price Book (2/14) HermanMiller Aeron_PrIncr_HMI Prototype 20090107.qxd 12/23/2013 4:02 PM Page 15

Frame Applique AE910! ======

Product Information Specification Information Description Step 1. This frame applique is applied to an Aeron work chair or work stool’s AE910 seat, back, and arms to minimize the effect of contact between the chair and a wood-edge surface. The seat and back appliques attach with the Step 2. Arms chair or stool’s existing screws. Coated arm yokes replace existing arm P fixed arms yokes; arm components are preassembled. The arm yokes use the chair H height-adjustable arms or stool’s existing arm pads. A fully adjustable arms Frame applique does not meet CAL 133 requirements. Aeron® Accessories Step 3. Size Notes A a size Order A-, B- or C-size applique to retrofit work chair; order B-size B b size appliqué to retrofit work stool. C c size

Prices for Steps 1-3. ABC AE910 P $300 300 300 H $314 314 314 A $319 319 319

Step 4. Finish WS titanium with smoke frame and smoke applique +$0 ZB graphite with graphite applique +$0

HermanMiller Aeron® Chairs Price Book (2/14) 15 HermanMiller 20 -Day or Less/Assigned Lead-Time Order Information A p

20 -Day or Less and Assigned Lead-Time Programs p e n

20 -day or less and assigned lead-time products are designed for d i x

established Herman Miller dealers with pre-approved credit. :

2

Products are distributed from multiple manufacturing facilities 0 - D a

across the United States. All products and options not designated by y

o an Assigned Lead-Time icon A will ship in 20 business days or less r

L e

after being acknowledged by Herman Miller. Products and options s s / designated by an A are on the assigned lead-time program and will A s s ship in 20 days, less than 20 days, or more than 20 days from order i g n acknowledgement. e d

L e a Ordering Procedure d - T i Please place orders through Order Manager. If this is not available to m e you, place orders through mail or fax. Verbal purchase orders will not O r d be accepted. e r

I Order Entry fax number for Passage®, 5000 Series, and Meridian® n f o r

Filing and Storage: (616) 846 9236. m a

Order Entry fax number for all other products: t i o (616) 654 3085. n For more information, contact your Customer Care representative at: (866) 854 3048 ext 3400.

Shipments and Delivery Per Herman Miller Terms and Conditions.

Changes and Cancellation Per Herman Miller Terms and Conditions.

HermanMiller October 2013 HermanMiller Casters and Glides Appendix: Casters and Glides and Casters Appendix: 32 Caster BB Caster C9 Caster DS Caster

1 17/8-inch-diameter hard 21/2-inch-diameter hard double- 2 /2-inch-diameter double-wheel 2-inch-diameter soft double- double-wheel caster; black wheel caster; black nylon caster; black nylon wheels and wheel braking caster; black nylon wheels and yoke; for wheels and yoke; for use on yoke; soft polyurethane tread; nylon wheels and hood; for use use on carpet only carpet only internal brake; for use on hard on hard floors only Applicable on: Applicable on: floors or carpet Applicable on: SAYL® Chairs Aeron® Chairs Setu® Chairs Applicable on: Aside® Chairs Ambi® Chairs SAYL Chairs Aeron Chairs SAYL Chairs Caper Chairs Ambi Chairs Caper® Chairs Caper Chairs Celle® Chairs Celle Chairs Embody® Chairs Embody Chairs Equa 2® Chairs Equa 2 Chairs Ergon 3® Chairs Ergon 3 Chairs Mirra® Chairs Mirra Chairs Mirra 2 Chairs Mirra 2 Chairs 49 Caster C7 Caster CA Caster H9 Caster

17/8-inch-diameter soft double- 21/2-inch-diameter double-wheel 2-inch-diameter single-wheel 21/2-inch-diameter double-wheel wheel caster; black nylon caster; black nylon wheels and caster; black rubber wheel with caster; clear polycarbonate wheels and yoke; for yoke; soft polyurethane tread; black yoke; for use on hard wheels; nylon yoke; soft use on hard floors or carpet for use on hard floors or carpet floors or carpet polyurethane tread; for use Applicable on: Applicable on: Applicable on: on hard floors or carpet. SAYL Chairs Aeron Chairs SAYL Chairs Co/Struc® System Applicable on: Ambi Chairs Setu Chairs Embody Chairs Caper Chairs Setu Chairs Celle Chairs Embody Chairs Equa 2 Chairs Ergon 3 Chairs Mirra Chairs Mirra 2 Chairs

HermanMiller December 2013 1 Casters and Glides continued

HW Caster OC Caster SW Caster U5 Caster Appendix: Casters and Glides

2-inch-diameter double-wheel Setu-specific 21/2-inch-diameter 2-inch-diameter soft double- 17/8-inch-diameter soft caster; black nylon wheels and double-wheel caster; black wheel caster; black nylon double-wheel caster; black hood; for use on carpet only nylon wheels and yoke; soft wheels and hood; for use on nylon wheels and yoke; for Applicable on: polyurethane tread; internal hard floors only use on hard floors or carpet Limerick® Cart brake; for use Applicable on: Applicable on: on hard floors or carpet Limerick Cart Aside Chairs Applicable on: Caper Chairs Setu Chairs

MD Caster SC8 Caster U4 Caster UD Caster

2-inch-diameter double-wheel 21/2-inch-diameter double- 17/8-inch-diameter hard 2-inch-diameter hard caster; black nylon wheels with wheel caster; black nylon double-wheel caster; black double-wheel caster; black integral chrome hood; soft wheels and yoke; soft nylon wheels and yoke; for nylon wheels with painted polyurethane tread; for use on polyurethane tread; quiet roll use on carpet only hood; for use on carpet only hard floors or carpet technology; for use on hard Applicable on: Applicable on: Applicable on: floors or carpet Aside Chairs Eames® Aluminum Group Eames Aluminum Group Applicable on: Caper Chairs Eames Executive Chairs Eames Executive Chairs Mirra 2 Chairs Eames Soft Pad Group Eames Soft Pad Group

2 December 2013 HermanMiller Casters and Glides continued Appendix: Casters and Glides and Casters Appendix: VD Caster 69 Glide GE Glide GG Glide

2-inch-diameter hard double- (Front glide shown) 2-inch-high glide; black nylon; 1/2-inch-high ganging glide; wheel caster; black nylon 21/8-inch-high glide; black for use on hard floors or carpet clear polycarbonate; for use wheels with integral chrome glass-filled nylon stem; steel- Applicable on: on hard floors or carpet hood; for use on carpet only plated swivel foot with Floor Equa 2 Chairs Applicable on: Applicable on: Saver Glide insert; for use on Ergon 3 Chairs Limerick Chairs ™ Eames Aluminum Group hard floors only Eames Executive Chairs Applicable on: Eames Soft Pad Group SAYL Chairs

16 Glide GD Glide GF Glide HG Glide

(Front glide shown) 11/2-inch-diameter glide; 1/2 inch 21/2-inch-high glide; black nylon; 1/2-inch-high glide; black nylon 21/8-inch-high glide; black or fog in height; black nylon; for use for use on hard floors or carpet glide with stainless-steel insert; acetal; for use on carpet only on hard floors or carpet Applicable on: for use on hard floors or carpet Applicable on: Applicable on: Aeron Chairs Applicable on: SAYL Chairs Eames Aluminum Group Celle Chairs Aside Chairs Eames Executive Chairs Mirra Chairs Eames Soft Pad Group Mirra 2 Chairs SAYL Chairs

HermanMiller December 2013 3 4 Appendix: Casters and Glides December 2013 December glides); for use on hard floors hard on use for glides); clear has base XT glides; black (G1 CAP?material thermoplastic glide; Aside Chairs Aside on: Applicable only carpet on use for 1 Equa Chairs Aeron on: Applicable carpet or 1 continued Glides and Casters SG Glide (for Aside) (for Glide SG Glide SB / / 2 4 -inch-high glide; black nylon; black glide; -inch-high diameter 1-inch -inch-high, 2 Chairs base has base SAYLChairs on: Applicable clear, and studio white finishes; clear,white studio and polycarbonate; for use on hard on use for polycarbonate; for use on hard floors or carpet or floors hard on use for 1 Chairs Limerick on: Applicable carpet or floors 1 polycarbonate in black, fog, black, in polycarbonate XS Glide XS Limerick) (for Glide SG / / 2 8 -inch-high glide; clear glide; -inch-high -inch-high glide; -inch-high Glide Saver Floor with foot swivel steel-plated stem; nylon ae Chairs Caper on: Applicable only carpet on use for acetal; ae Chairs Caper on: Applicable only floors hard 1 Glide YX 1 Y7 YX Glide YX 7 7 / / 8 8 Glide -inch-high glide; black glide; -inch-high -inch-high glide; black glide; -inch-high ™ insert; for use on use for insert; HermanMiller Size/Fit Reference Aeron ® Chair — A

This reference helps people select A-, B-, or C-size chairs when the three To determine which chair size is best, find the point of intersection p p e sizes are not available for actual test sitting. Height and weight are key for your height and weight. Aeron A-, B-, and C-size chairs are tested n d i indicators of suitable chair-size choice. Since the B-size chair is and warranted for use by persons 300 pounds and under. x :

S i

designed to fit a broad range of people, Herman Miller recommends it z e /

for users who fall in the A/B or B/C category. This chart applies to F i t

Aeron chairs with the extended-height-range pneumatic height- R e f adjustment cylinder. e r e n c e

— A e r o n ®

C h

6' 6" a i r 6' 5"

6' 4"

6' 3"

6' 2"

6' 1"

6' 0"

5' 11"

5' 10"

5' 9"

5' 8"

5' 7"

5' 6"

5' 5"

5' 4" )

s 5' 3" e h

c 5' 2" n I /

t 5' 1" e e

F 5' 0" (

t

h 4' 11" g i e

H 4' 10" 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 6 5 8 2 3 4 0 7 8 3 4 9 0 5 6 1 2 0 0 7 9 1 2 2 2 1 2 1 1 3 2 2 2 2 1 2 1 1 1 9 2 1 1 1 Weight (Pounds)

HermanMiller, Inc. January 2013 1 HermanMiller Fire Retardancy Seating — A

Fire Retardancy p p e

Fire-retardant chairs are manufactured with special cushions, cushions n d i covered with fire-barrier material, and/or are upholstered in approved x :

F i fire-retardant fabrics. These chairs meet CAL 133 requirements. r e

R e t a r d a n

State of California c

State of California y

Bureau of Home Bureau of Home — S

Furnishings, Furnishings, Technical e a t

Technical Bulletin 133 Bulletin 117 , Section E i n g AireWeave ™ FR Balance 1 FR • Bento FR • Circuit FR • Coil FR • ColorGuard FR • Crepe FR • Crossing FR • Cygnus ™ FR • Flexnet ™ FR • Gem FR • Hopsak FR • Latitude ™ FR • Leather FR • Lyris 2™ 3 FR • Moiré FR • Noble • Pellicle® Classic 4 FR • Plateau FR • Quilty FR • Railroad FR • Rhythm 2 FR • Slideshow FR • Stitches FR • Strata • Twist FR • Wickendon FR • • Fabric meets code requirements. F•R To meet code requirements, fabrics must be applied to approved chairs identified with FR product numbers. To verify a fabric is approved for a specific chair, see the Fire-Retardant listing on the Seating Textiles Application Chart.

1 Balance 3512 carbon and 3513 black only available on Embody ® FR chairs. 2 Rhythm 3014 black only available on Embody FR chairs. 3 Lyris 2 4W11 graphite only available on Setu ® FR chairs. 4 Pellicle Classic 3D01 graphite only available on Aeron ® FR chairs.

HermanMiller October 2013 HermanMiller Customer s Own Material/Customer s Own Leather O’rder Information Seatin’g — A p

Packaging Textile Approval p e n

Packaging varies according to individual product. A surcharge may 1. Select a COM/COL textile and a Herman Miller product. d i x be added for special packaging requests. Contact Customer Care for 2. If your textile is not listed in Kiosk, obtain a test number from a COM :

C u

specific information. representative at (616) 654 3400 . You can also submit your request s t o

within Kiosk. Please have the following information ready before m e r

Customer s Own Material/Customer s Own Leather calling: textile name, number, pattern, roll width, and the product ’ s

’ ’ O

you will apply it to. w n

Program Overview Additional yardage may be needed due to the unique M a

The Custome rs Own Material (COM) and Customer s Own Leather (COL) characteristics of a textile. All package labels must include the words t ’ ’ e r i program gives you the option of using textiles other than those listed. COM test or COL test and the assigned COM/COL test number. a

“ ” “ ” l /

Herman Miller will test textiles for application to Herman Miller 3. Herman Miller will notify you of approval or disapproval within 4 days C u s t

products and will process orders for those with approved COM/COL from receipt of the test yardage. o m

textiles only. COM/COL are assigned lead-time textiles. e r ’ s

Kiosk lists an overview of fabrics and leathers that have been Ordering Products with COM/COL O w

tested and indicates whether or not they were approved for application 1. Refer to the specific products to determine the yardage required for n

L to Herman Miller products. COM/COL textiles. e a t Specific information on the terms and conditions, testing, 2. If your textile is not listed in Kiosk, call a COM representative at h e r approval, and ordering process for COM/COL is listed below. Questions (616) 654 3400 or (866) 854 3048 ext 3400 . The representative will O r d about the COM/COL program and requests for assistance may be assign an identification number for your textile (ID#) and will verify e r

I directed to your COM representative at: yardage requirements for your order. Additional yardage may be n f o r

(616) 654 3400 needed due to the unique characteristics of a textile. m a

(866) 854 3048 ext 3400 3. Enter your order on Order Manager in Kiosk. t i o n

4. Upon receipt of your purchase order, Herman Miller will send you a —

Custome rs Own Material/Custome rs Own Leather Warranty PO acknowledgment. S

’ ’ e a

Herman Miller does not warrant COM/COL textiles. COM/COL textiles 5. Arrangements must be made for the textiles to be shipped from the t i n are tested for application only; they are not tested for performance. The supplier to Herman Miller for application to the seating products. g Herman Miller warranty does apply to the underlying products. Textiles must be tagged with the assigned identification number and Suppliers of COM/COL textiles are responsible for color the roll yardage quantity. See Kiosk for shipping procedures and consistency within commercial tolerances, UV stability, and resistance current shipping addresses or contact a COM representative at to soiling and perspiration. (616) 654 3400 or (866) 854 3048 ext 3400 . Products will be scheduled for production when COM/COL Custome rs Own Material/Custome rs Own Leather Pricing textiles are received at Herman Miller. Standard lead times in ’ ’ COM is a Category 1 fabric. There are no application charges for COM effect at that time will apply. fabrics. COL is a Category 7 textile; refer to prices on specific products to determine the application charge. Note: If textiles are to be purchased directly by Herman Miller through Ordering and payment for COM/COL textile yardage are the the Supplier Connection program, Herman Miller will handle the responsibility of the customer and the textile supplier. ordering and shipping process and will schedule your order for If desired, Herman Miller will purchase COM textiles directly production upon receipt of your purchase order (dependent on textile availability). Refer to the Supplier Connection program for more from True Textiles, C.F. Stinson, Luna Textiles, Maharam, and information. Momentum Textiles to simplify ordering and shipment. For this service, refer to the Supplier Connection program.

HermanMiller August 2010 1 Customer s Own Material/Customer s Own Leather O’rder Information Seatin’g — continued g

n Supplier Connection Supplier Connection Pricing i t a

e Textiles purchased by Herman Miller through the Supplier Connection S Program Overview program are COM. COM is a Category 1 fabric. There are no application —

n The Supplier Connection program is a service offered by Herman Miller charges for COM fabrics. o i t

a to purchase approved COM textiles directly from True Textiles, C.F. Payment for textiles purchased by Herman Miller through the m r

o Stinson, Luna Textiles, Maharam, and Momentum Textiles. When you Supplier Connection program is the responsibility of the customer or f n I

select a textile through this program, Herman Miller will facilitate the dealer. Herman Miller will invoice the order at the suppli er s prices r ’ e

d ordering, scheduling, and shipment of the textile directly with the published at the time of the order. r O

r supplier. e h

t Suppliers included in the Supplier Connection program keep an Textile Approval a e

L active inventory of textiles that are pre-approved for application to 1. Refer to Kiosk to identify the approval status of the textile. If your n

w Herman Miller products. Pre-approval applies only to the suitability textile is not listed, contact the COM Department to request testing O

s ’ of a textile for manufacturing and application to a Herman Miller for application to Herman Miller products. r e

m product. Kiosk provides an overview of fabrics that have been tested 2. Herman Miller will notify you of approval or disapproval in o t

s and indicates whether or not they were approved for application to approximately 4 days from receipt of the test yardage. If the textile is u C

/ Herman Miller products. approved, it will be assigned a COM identification number. l a i

r Specific information on the terms and conditions, testing, e t

a approval, and ordering process for the Supplier Connection program is Ordering Products with Supplier Connection COM M

n listed below. Questions and requests for assistance may be directed to 1. Identify and include the following information on your purchase order: w O

your COM representative at: Product number and option s

’ • r

e (616) 654 3400 Herman Mill er s COM identification number • ’ m

o (866) 854 3048 ext 3400 2. Enter your order on Order Manager in Kiosk. t s

u 3. Upon receipt of the purchase order, Herman Miller will process your C

: x

i Supplier Connection Warranty order and send you a PO acknowledgment. Herman Miller will d

n Textiles purchased by Herman Miller through the Supplier Connection

e determine the yardage required to produce your product and will p

p program are COM and are not warranted by Herman Miller. COM textiles order and schedule for delivery the required textile. Standard lead A are tested for application only; they are not tested for performance. The times in effect at the time the textile is allocated at the supplier will Herman Miller warranty does apply to the underlying products. apply to products ordered through this program. Suppliers of COM textiles are responsible for color consistency within commercial tolerances, UV stability, and resistance to soiling and perspiration.

2 August 2010 HermanMiller Open Line Textiles s l s o Application n o a s s t l n S m o a / o

Chart Seating o t s t m t r i S d

— o O / t a o t / s h s o r s O i C r n

i w / a

Available a y s d a h l g r e

• h m i C a P n r t

i s f a o C i t

A l

Assigned lead-time textile. -

e t t t i d

o h t K t o a p a

t K e g s S t C i

r l s o e O

i

u e n t r m See following page for exception notes. K e / i o S i K p o

S m r w t t

S t s r r h a u s o A r a / g c m 3 l

l i G A p m h

o r l s

e a n r e r a o s r i C s d U l a A e i l S p

r r

r A

h h l m G

i i n i b g a s

S e / s d m e C p b u e

a m r a a a l a n r

v h d s i s a h i i a t i n g o h U h r h b e i t a t C a m t d

2 i s P s a e n

s

C C C s s a C r - g s a s y P e a h u ,

a r

s s

u h r t k t m l

u r a i i p a j n i r e u i l c d i k p r a a t C e f h k s i j l C u o

a f f f a r r o a d r u e l S u a n o o C i M a u L d p e m T h o o o h o x j F h o o A

a ™ A h r S h ® A S d ™ s W C S S C L E S T W d C y ™ ® n ™ i C

® W A C 3 3 W e ®

® ™

A n d 2 2 2 o p ® s s s s s s s s s m S t ® ®

r i ® ®

z n n i i n n o o e s e e e e e e e e e o e a t L L a a a e e h t o o s r b b o o e l b A d o e l s Y Y r r u u u p l l r i m m m m m m m m m s g g i p e o m e m s e A A w a e e u y a a a a a a a a a r q m r q q p G E E E E E E E E E S A E C C C E A E S S S C E E N E A A A M e n

Price Category 1-8 d i x

No fabrics available at this time. :

O p

Price Category 9 e n

L

VZ _ _ Leather - Wollsdorf Leather 14 84 i • •• ••• •••••• • •••• n e

T e x t i l e s

A p p l i c a t i o n

C h a r t

— S e a t i n g

4 See specific products for information on specifying leather in combination with fabric. 8 Only available on nonupholstered outer back option (PB). 14 Only available on Celle UC Chairs.

HermanMiller October 2013 1 HermanMiller Appendix: Open Line Textile Colors Seating 1 — December 2013 Contact the supplier for Open Line leather: Wollsdorf Leather 345 South Road High Point, NC 27262 (336) 884-5005 [email protected] 9 sq. ft. per hide 50 Clover Sage Teak Lagoon Spirit Grape Indigo Fawn Safari Deep Earth Chocolate Cocoa Eggshell Honeydew Parchment Caramel Camel Tan Saddle Orange Persimmon Russet Cherry Chateau Avocado Magnolia Bone Seating Wollsdorf Leather Wollsdorf — VZ25 VZ26 VZ27 VZ28 VZ29 VZ30 VZ31 VZ32 VZ33 VZ34 VZ35 VZ36 VZ12 VZ13 VZ14 VZ15 VZ16 VZ17 VZ18 VZ19 VZ20 VZ21 VZ22 VZ23 VZ24 Leather Leather - Open Line approx. 100% leather VZ10 VZ11 Price Price Category 1 - 8 No fabrics available at this time. Open Line Textile Colors Open Line Textile HermanMiller Price Price Category HermanMiller Proprietary Textiles Application Chart Seating —

Available • A Assigned lead-time textile. See following page for exception notes. Adjustable Arm Kit ® 2 Refer to the “Proprietary Textiles Application Chart - Collection Seating” Chairs Chairs Chairs ® ® Fully Fully Upholstered Chairs/Stools Split-Pad Upholstered Chairs/Stools Work Work Chairs/Stools Chairs for additional products and textiles. Chairs Chairs 2 Chairs 3/ Equa 3 Work Work Chairs Chairs ® ® 2 2 ® ® ® ® ® ® Appendix: Proprietary Textiles Proprietary Appendix: Chart Application Ergon Ergon Mirra SAYL Side Chairs SAYL Setu Equa Equa Aside Ergon Ergon Celeste™ Seating Swoop™ Lounge Seating - Fully Upholstered Swoop Lounge Seating - Plywood Sling Seating Eames Tandem Cushion Tops Systems SAYL Aeron Armpads/Arm Kit Mirra Aeron Caper Embody Celle Price Category 1 COM Customers Own Material A 14 11 1 111 111111 ’ 3Q_ _ AireWeave™ (7Q_ _) • 1A7_ _AireWeave™ 2 • 3P_ _ ColorGuard 15 22 2 3 8 6 • • ••• •• 8T_ _ Crossing •••••••••••• 6V_ _ Flexnet™ • 95_ _ Gem 14 •••• ••• ••• •• 4W_ _ Lyris 2™ • 3D_ _ Pellicle® Classic (3V_ _) • 2Z_ _ Slideshow 14 21 22 ••••• •• Price Category 2 92_ _ Crepe ••••••••••••• 3A_ _ Moiré 14 •••• ••• • •• 4M_ _ Pellicle Tuxedo (4Q_ _) •

4E_ _ Pellicle Waves (4F_ _) — • 8V_ _ Railroad Seating ••••••••••••• 30_ _ Rhythm 23 • •• •• •• • 8R_ _ Twist ••••••••• •• Price Category 3 70_ _ Bento 2 8 20 ••• •• •• 1FA _ Circuit 14 •••• ••• ••• •• 8S_ _ Coil ••••••••••••• 8M_ _ Latitude™ 23 23 3 ••• •• 8U_ _ Stitches ••••••••••••• 5K_ _ Wickendon 14 •••• •• • •• Price Category 4 7Y_ _ Bingo A 238 ••• •• 6J_ _ Plateau •••• • 6S_ _ Quilty 14 •• ••• •• 8Y_ _ Spools 14 21 •••••• • • 22P_ _ Strata 21 22 •• ••• • Price Category 5 14A_ _Hopsak 14 22 • •• ••• ••• •• 22N_ _ Noble (22H__) 14 21 22 38 •• • ••• Price Category 6 35_ _ Balance • Price Category 7 COL Customers Own Leather A 1 14 11118 1 ’ •• Price Category 8 No fabrics available at this time Price Category 9 21_ _ Leather 14 84 • •• ••• ••

HermanMiller December 2013 1 2 Appendix: Proprietary Textiles Application Chart Seating — December 2013 December • continued Seating Chart Application ProprietaryTextiles See below for exception notes. exception for below See A 3 14 8 7 2 1 Leather _ 21_ Category Price Balance _ 35_ Category Price 14A Hopsak _ _ Category Price Quilty _ 6S_ Plateau _ 6J_ Category Price Wickendon _ 5K_ Stitches _ 8U_ Latitude™ _ 8M_ Coil _ 8S_ Circuit 1FA_ Bento _ 70_ Category Price Twist _ 8R_ Rhythm _ 30_ Railroad _ 8V_ Moiré _ 3A_ Crepe _ 92_ Category Price Slideshow _ 2Z_ Pellicle _ 3D_ Lyris _ 4W_ Gem _ 95_ Flexnet™ _ 6V_ Crossing _ 8T_ ColorGuard _ 3P_ _) AireWeave™(7Q_ _ 3Q_ Customer COM Category Price Fire-RetardantChairs/Fabrics 6 4 Available Assigned lead-time textile. lead-time Assigned Available on A-and B-size Equa B-size A-and on Available Available on Celle UC (upholstered seat) Chairs. seat) (upholstered UC Celle on Available (PB). option back outer nonupholstered on available Only Only available in available Only Burgundy, Ergon all on Available COM/COLfor information. Kiosk and appendices book price to Refer Only available in available Only fabric. with combination in leather specifying on information for products specific See 2™ ® 3P19 9 6 5 4 3 2 1 Classic ’ s Own Material Own s Slate, and Slate, 3D01 3P02 3 Navy, Graphite. chairs except for fabric back (FB) option. (FB) back fabric for except chairs — 3PC7 3P03 A 2 Bucksuede. split-pad upholstered chairs. upholstered split-pad Spruce, 3P14 Black, 3P17 16 15 17 20 18 23 22 21 Only available in available Only Chairs. edge) protective with seat (upholstered HC Celle on Available Only available in available Only Not available in Bento in available Not Only available in available Only Seating” for color offering. color for Seating” “ProprietaryTextile to Refer colors. Colors- select in Available backs. upholstered SAYLwith on chairs available side Not chairs. SAYLwork on back available upholstered Not Ottoman. and Lounge Plywood Swoop 4W31 3512 3014 7 Aeron® Work Chairs/Stools

• Mirra® Chairs 7001 Carbon and Carbon Black. Graphite. 14 14 14 14 14 14 14 14 16 14 14 14 14 21 14 14 22 14 15 ••• Celle® Chairs 17 Frost, Embody® Chairs •••• • •• • ••••• •• •• •• •••• •• •• •• • •• •• • •• ••• •••• ••••••••• •• •• •••• •• •• •• SAYL® Work Chairs 7002 3513 •• SAYL Side Chairs 18 Setu® Chairs Linen, and Linen, Black. •••• •••• • •••• •• •••• 23 111 1111 Ergon 3® Chairs

• • ••• Equa 2® Fully Upholstered Chairs/Stools Equa 2 Split-Pad Upholstered Chairs/Stools 7003 • HermanMiller Aside® Chairs • Khaki on Khaki Caper® Chairs Celeste™ Seating

• Swoop™ Lounge Seating - Fully Upholstered

6 Eames® Tandem Sling Seating Proprietary Textile Colors Seating —

Price Category 1 Appendix: Proprietary Textile Proprietary Appendix: Colors Customer s Own Material ColorGuard Crossing Flexnet ’ ™ See Order Information in 54" wide 54" wide 69% elastomeric Appendices. Assigned lead-time 100% vinyl 86% antimony-free polyester 31% polyester textile. A 3P01 Grey 14% polyester 6V01 Black * 3P02 Navy 8T03 Wicker 6V02 Silver Grey AireWeave * 3P03 Spruce A 8T04 Porcelain ™ For Mirra® chairs with a 3P04 Jade A 8T05 Warm Grey Gem graphite or shadow base/frame. 3P05 Natural A 8T06 Sepia 54 wide " 67% elastomeric 3P08 Blueberry A 8T07 Pumpkin 100% antimony-free polyester 33% antimony-free polyester 3P09 Coal A 8T08 Copper 9501 Sesame

3Q11 Graphite 3P12 Black Plum A 8T09 Cranberry 9502 Tangerine — Seating 3Q12 Shadow * 3P14 Black 8T10 Tomato 9503 Red 3Q13 Citron 3P15 New Burgundy A 8T11 Mulberry 9504 Red Violet 3Q15 Blue Fog * 3P17 Burgundy A 8T12 Plum 9505 Mulberry 3Q16 Cappuccino * 3P19 Slate 8T13 Green Apple 9506 Java 3Q20 Alpine 3P31 Horizon Blue A 8T14 Loden 9507 Twilight 3P33 Pumice 8T15 Spruce 9508 Bayou AireWeave 3P54 Candy Apple A 8T16 Periwinkle 9509 Iris For Mirra chairs with a 3P58 Beige A 8T17 Cerulean 9510 Berry Blue graphite base/frame. 3P66 Deep Clay A 8T18 Indigo 9511 Aqua Green 67% elastomeric 3P72 Allspice A 8T19 Shale 9512 Green Apple 33% antimony-free polyester 3P90 Green Tea A 8T20 Brownstone 9513 Spruce 7Q01 Graphite Dark 3P93 Camelback A 8T21 Bark 9514 Black 7Q05 Blue Fog Dark 3P96 Manzanita A 8T22 Tin 9515 Slate Grey 7Q06 Cappuccino Dark 3P97 Fudge A 8T23 Graphite 9516 Fog 3PB2 Sea Grass A 8T24 Black AireWeave 2 3PB5 Vizcaya Palm A Lyris 2 ™ For Mirra 2 chairs 3PB9 Neptune A 74% elastomeric 67% elastomeric * 3PC7 Bucksuede A 26% polyester 33% antimony-free polyester 3PD4 Otter A 4W21 Alpine 1A701 Alpine 4W22 Mango 1A702 Slate Grey * Colors available on Eames® 4W23 Chartreuse Tandem Sling Seating. 1A703 Graphite 4W25 Berry Blue 1A704 Lime Green 4W26 Slate Grey A Assigned lead-time color. 1A705 Cappuccino 4W28 Chino 1A706 Urban Orange 4W29 Rattan 1A707 Dark Turquoise 4W30 Java 1A708 Twilight 4W31 Graphite

HermanMiller December 2013 1 Proprietary Textile Colors Seating continued —

Price Category 1 Price Category 2 continued

Pellicle® Classic Crepe Pellicle® Tuxedo Railroad For Aeron® chairs with a 54" wide For Aeron chairs with a 54" wide graphite or polished aluminum 100% recycled polyester graphite or polished aluminum 100% recycled polyester base. 9201 Licorice base. 8V01 Straw 70% elastomeric 9203 Smoke 64% elastomeric 8V02 Squash 30% polyester 9207 Cherry 36% polyester 8V03 Cayenne 3D01 Carbon 9209 Claret 4M01 Grey Black 8V04 Nutmeg 3D02 Lead 9212 Raisin 4M02 Blue Black 8V05 Root 9213 Dawn 8V06 Wicker Pellicle Classic 9218 Aquamarine Pellicle Tuxedo 8V07 Moss For Aeron chairs with a titanium 9223 Cadet For Aeron chairs with a titanium 8V08 Aquamarine base. 9232 Gossamer base. 8V09 Slate 70% elastomeric 9235 Cashew 64% elastomeric

Appendix: Proprietary Textile Colors — Appendix: Seating Proprietary Textile 30% polyester 9236 Sesame 36% polyester Rhythm 3V01 Zinc 9237 Pekoe 4Q01 White Gold 54" wide 3V03 Quartz 9238 Cornucopia 100% polyester 9239 Chutney Pellicle Waves * 3001 Kiwi Green Slideshow 9240 Mahogany For Aeron® chairs with a 3002 Green Apple 54" wide 9241 Beachglass graphite or polished aluminum 3003 Peacock 54% recycled polyester 9242 Balsam base. * 3004 Bayou 46% polyester 9243 Midnight 68% elastomeric 3005 Berry Blue 2Z01 Cinema 9244 Artichoke 32% polyester 3006 Iris 2Z02 Snapshot 9245 Barnacle 4E01 Carbon 3007 Twilight 2Z03 Shutter 9246 Malt 4E03 Platinum * 3008 Pumpkin 2Z04 Scenic 9247 Phantom * 3009 Poppy 2Z05 Portrait Pellicle Waves 3010 Molasses 2Z06 Still Life Moiré For Aeron chairs with a titanium 3011 Mulberry 2Z07 Blueprint 54" wide base. * 3012 Khaki 2Z08 Halftone 100% recycled polyester 68% elastomeric 3013 Mink 2Z09 Exposure 3A01 Concrete 32% polyester 3014 Black 2Z10 Zoom 3A02 Biscotti 4F01 Zinc 3015 Charcoal 3A03 Rattan 4F03 Quartz 3A04 Chambray * Colors not available on 3A05 Fern Embody Chair. 3A08 Violet 3A09 Zin 3A10 Curry 3A11 Spice 3A12 Cork

2 December 2013 HermanMiller Proprietary Textile Colors Seating — continued

Price Category 2 Price Category 3 continued Appendix: Proprietary Textile Proprietary Seating Appendix: — Colors Twist Bento Latitude Stitches ™ 54" wide 54" wide 61" wide 54" wide 80% antimony-free polyester 100% antimony-free polyester 100% polyester 54% polyester 13% recycled polyester 7001 Frost 8M01 Graphite 46% recycled polyester 7% polyester 7002 Linen 8M02 Shadow 8U02 Rye 8R04 Chamois 7003 Khaki 8M03 Citron 8U03 Khaki 8R05 Wicker 7004 Truffle 8M04 Felt Green 8U04 Honey 8R06 Nutmeg 7005 Grey Black 8M05 Blue Fog 8U05 Cattail 8R07 Squash 7006 Pumpkin 8M06 Cappuccino 8U06 Pumpkin 8R08 Copper 7007 Cranberry 8M07 Terra Cotta 8U07 Brick 8R09 Cayenne 7008 Everglade 8M10 Alpine 8U08 Cool Grey 8R10 Poppy 7009 Cobalt 8M12 French Blue 8U09 Slate Blue 8R11 Magenta 8M13 Midnight Blue 8U10 Juniper 8R12 Garnet Circuit 8M14 True Red 8U11 Evening Blue 8R13 Iceberg 54" wide 8M15 Champagne 8U12 Charcoal 8R14 Tin 100% recycled polyester 8M16 Chestnut 8U13 Kiwi Green 8R15 Shale 1FA1 Sunflower 8M17 Black 8U14 Olive 8R16 Graphite 1FA2 Mango 8M18 Brownstone 8U15 Pesto 8R17 Birch 1FA3 Red 8M19 Green Leaf 8U16 Cocoa 8R18 Sepia 1FA4 Magenta 8M20 Cabernet 8U17 Seed 8R19 Coffee Bean 1FA5 Cocoa 8R20 Bayou 1FA6 Berry Blue Latitude Wickendon 8R21 Periwinkle 1FA7 Peacock Colors for Mirra® Chairs 54" wide 8R22 Blueberry 1FA8 Green Apple 100% polyester 100% polyester 1FA9 Graphite 8M01 Graphite 8R23 Green Apple 5K01 Morning Glory 1FAA Black 8M02 Shadow 8R24 Loden 5K02 Jasmine 8M03 Citron 8R25 Turquoise 5K03 English Ivy Coil 8M05 Blue Fog 5K04 Woodbine 54" wide 8M06 Cappuccino 5K05 Grapevine 100% recycled polyester 8M10 Alpine 5K06 Fig 8S01 Nougat 8M13 Midnight Blue 5K07 Sweet Autumn 8S02 Squash 8M15 Champagne 5K08 Trumpet Vine 8S03 Copper 8M16 Chestnut 8S04 Molasses 8M17 Black 8S05 Chutney 8M18 Brownstone 8S06 Claret 8S07 Plum Latitude 8S08 Olive Wood Colors for Mirra 2 Chairs 8S09 Root 100% polyester 8S10 Pesto 8M10 Alpine 8S11 Hemlock 8M17 Black 8S12 Java 8M21 Slate Grey 8S13 Bayou 8M22 Lime Green 8S14 Peacock 8M23 French Press 8S15 Twilight 8M24 Urban Orange 8S16 Ink 8M25 Dark Turquoise 8S17 Black 8M26 Twilight

HermanMiller December 2013 3 Proprietary Textile Colors Seating — continued

Price Category 4 Price Category 5

Bingo Plateau Spools Hopsak 54" wide Perspectives® Collection 54" wide 56" wide 100% PVC-free polyurethane knit to size 51% recycled polyester 100% recycled polyester 7Y01 Oyster 100% polyester 49% polyester 14A20 Black 7Y02 Natural 6J01 Feather Grey Crypton® Green 14A22 Raw Umber Dark 7Y03 Cashew 6J02 Trail 8Y01 Cashew 14A26 Grey Blue Dark 7Y04 Buff 6J03 Mustard Seed 8Y02 Wicker 14A30 Sepia Dark 7Y05 Rattan 6J04 Fennel 8Y03 Trail 14A38 Emerald Dark 7Y06 Root 6J05 Red Pepper 8Y04 Cappuccino 14A39 Yellow Dark 7Y07 Woodland 6J06 Twig 8Y05 Copper 14A40 Orange 7Y08 Camel 6J07 Waterfall 8Y06 Paprika 14A41 Sienna 7Y09 Copper 6J08 Sagebrush 8Y07 Sedona 14A42 Olive Green Dark 7Y10 Allspice 6J09 Winter Berry 8Y08 Bluegrass 14A43 Crimson

Appendix: Proprietary Textile Colors — Appendix: Seating Proprietary Textile 7Y11 Canyon 6J10 Thunder 8Y09 Lagoon 14A44 Crimson Dark Dark 7Y12 Henna 6J11 Blueberry 8Y10 Grape 14A45 Violet Dark 7Y13 Sedona 6J12 Rosemary 8Y11 Beachglass 14A46 Pink Dark Dark 7Y14 Black Plum 6J13 Wild Plum 8Y12 Marsh 14A47 Ultramarine Dark 7Y15 Currant 6J14 Black 8Y13 Bud 14A48 Cobalt Blue 7Y16 Mahogany 14A49 Terra Cotta 7Y17 Seed Quilty Strata 14A50 Ochre Dark 7Y18 Mushroom 56" wide 54" wide 7Y19 Blue Grey 100% antimony-free polyester 50% solution dyed recycled nylon Noble 7Y20 Navy GreenShield 50% solution dyed nylon 54" wide 7Y21 Black 6S01 Wicker 22P01 Rattan 100% wool 7Y22 Mint 6S02 Honey 22P02 Yellow Jacket 22N01 Bucksuede 7Y23 Seaport 6S03 Khaki 22P03 Avocado 22N02 Chipotle 7Y24 Evening Blue 6S04 Straw 22P04 Pesto 22N03 Magenta 7Y25 Hemlock 6S05 Squash 22P05 Peacock 22N04 Cherry 7Y26 Kiwi Green 6S06 Cayenne 22P06 Blue Jay 22N05 Bordeaux 7Y27 Celadon 6S07 Brick 22P07 Blueberry 22N06 Boysenberry 7Y28 Moss 6S08 Cerulean 22P08 Boysenberry 22N07 Cadet 7Y29 Pesto 6S09 Blue Violet 22P09 Mango 22N08 Berry Blue 6S10 Mink 22P10 Paprika 22N09 Peacock 6S11 Green Apple 22P11 Mulberry 22N10 Kiwi Green 6S12 Jade 22P12 Wheat 22N11 Pesto 6S13 Indigo 22P13 Brownstone 22N12 Blue Grey Mix 22P14 Bayou 22N13 Tan Mix 22P15 Trail 22H14 Heathered Brown 22H15 Heathered Black 22H16 Heathered Grey

4 December 2013 HermanMiller Appendix: Proprietary Textile Colors Seating 5 — December 2013 9 sq. ft. per hide 50 Smoke Graphite Ivory Wheat Honey Copper Canyon Olive Tobacco Mink Black Leather 2110 2111 Price Price Category approx. 100% leather 2101 2102 2103 2104 2105 2106 2107 2108 2109 8 No fabrics available at this time. Price Price Category 7 s Own Leather ’ A Seating — Customer See Order Information in Appendices. Assigned lead-time textile. Price Price Category 6 Black Green Green Apple Blue Moon Berry Blue Iris Carbon Balance 3513 3509 3510 3512 3506 3507 100% polyester Proprietary Textile Colors Textile Proprietary continued HermanMiller Price Price Category For more information about our products and services or to see a list of dealers, please visit us at HermanMiller.com or call (800) 851 1196.

This book is recyclable. Printed in U.S.A. on recycled paper.

© 2014 Herman Miller, Inc., Zeeland, Michigan

® Z, Y, 3D Intelligent, Abak, AO, Action Office, Aeron, Ambi, ArcSpan, Ardea, Aside, Avall, Avive, Babble, C2, Canvas Office Landscape, Caper, Celle, Co/Struc, Daisyone, Eames, Eco-Dematerialized, Embody, Envelop, Equa 2, Ergon 3, Ethospace, Fine-Tune, FlexFront, Flo, Ground Cloth, Herman Miller Healthcare, Herman Miller Options, Intersect, Kinemat, Lapjack, Leaf, Life Unframed, Lifework, Limerick, Maharam, Meridian, Mirra, Passage, Pellicle, Perspectives, PostureFit, Prospects, Resolve, Rodney, RoomTune, SAYL, Scooter, Setu, Stoa, Teneo, Thrive, Tu, Vary Easy, Wishbone, Y-Tower, and Z-Axis are among the registered trademarks of Herman Miller, Inc., and its owned subsidiaries.

™ About Face, AireWeave, Airia, Albert, Arrio, Backfit, Boomerang, Bubbletack, Burdick Group, Butterfly Back, Celeste, Cellular Suspension, Clam, CLT, CoActive, Cognita, Compass, Connect, Cygnus, DOT, Duracare, Durawrap, Enchord, EnhancedAccess, Everywhere, E-Wall, Flex-Edge, Flute, Formcoat, Formwork, Harmonic, Herman Miller for the Home, Herman Miller International Collection, Herman Miller Select, Hopsak 2, Iota, Jaw, Keyless Entry, Latitude, Locale, Loop, Lyris, Lyris 2, Metaform Portfolio, Multiscrim, My Studio Environments, Nala, Nelson, Pixelated Support, Programmable Environments, Public Office Landscape, Q, Rapunzel, Recline, Renew, Selector, Sense, Stackable, Stackable Storage, Swoop, TaskPointe, Thinking is good for you, Tone, TriFlex, Twist, V-Wall and Wireframe are among the trademarks of Herman Miller, Inc., and its owned subsidiaries.

SM S3, TAP, Textile Alliance Program, and Thoughtpile are among the service marks of Herman Miller, Inc.

Chemsurf® is a registered trademark of Wilsonart International.

Corian® is a registered trademark of E.I. du Pont de Nemours and Company Corporation.

DACRON® is a registered trademark of INVISTA S.a r.l.

Edelman® Leather is a registered trademark of Edelman Leather, Inc.

FLEXNET™ is a trademark of Milliken & Company.

Floor Saver Glide® is a registered trademark of Carpin Manufacturing, Inc.

Geiger® is a registered trademark, and Bumper™ is a trademark, of Geiger International.

Goetz™ is a trademark of Mark W. Goetz.

GREENGUARD® is a registered trademark of the Greenguard Environmental Institute.

Hang-It-All® is a registered trademark of Lucia Eames Demetrios, d.b.a. Eames Office.

Holophane® is a registered trademark of Holophane.

Ingeo™ is a trademark of Cargill Dow LLC. iPad® is a registered trademark of Apple, Inc.

LifeSize® is a registered trademark of LifeSize Communications, Inc.

Microsoft® and Natural® Keyboard are registered trademarks of Microsoft Corporation.

MOTOROLA XOOM™ is a trademark of Motorola Trademark Holdings, LLC.

Noguchi® and the Noguchi table configuration are registered trademarks, and Rudder Table™ is a trademark, of The Isamu Noguchi Foundation and Garden Museum.

Place Textiles® is a registered trademark of Place Textiles.

Qt Quiet technology™ and Qt™ are trademarks of Cambridge Sound Management, Inc.

SuperSeat™ is a trademark of ITW-Dahti Seating.