262 Pearlgreen Corporation Tools, Cutting The Industrial Supply Group

CHAMPION CUTTING TOOL CORP. CHAMPION CUTTING TOOL CORP. CHAMPION CUTTING TOOL CORP. High Speed Drill Bit High Speed Cobalt Drill Bit High Speed Longboy Drill Bit

High speed steel, 118 deg. point, bright finish, High speed steel, straight shank, 118 deg. Straight shank, 135 deg. split point. straight shank. point. These drills have a heavy-duty construction Designed for general purpose drilling in a and are designed to drill tough, high-tensile wide range of materials in deep hole Designed for general purpose drilling under a materials such as high-strength alloy steels, applications. stainless steel, titanium, manganese steel, wide range of operating conditions in various Flute Length: 9 in. materials. Surface treated with a black oxide armor plate and inconel. Manufactured from finish for abrasion resistance and improved heat-resistant M42 cobalt high speed steel, Overall Length: 12 in. coolant adherence. these drills maintain the cutting ability at temperatures in excess of 1000 deg. F and are extremely abrasion resistant. Diameter Incorporates an additional stress relief in the Mfg. No. (in.) PG No. presence of low pressure live steam, actually 1200 ¹⁄₂ HS-L1 forming a controlled rust (oxide) appearance. Drill Bit Over- Mfg. Size Flute all 1200 ⁷⁄₁₆ HS-L2 No. (in.) Length Length PG No. 1200 ³⁄₈ HS-L3 Drill Bit Over- 705C ¹⁄₁₆ 2⁵⁄₈ 3⁷⁄₈ HS-*C01 1200 ⁵⁄₁₆ HS-L4 Mfg. Size Flute all 705C ⁵⁄₆₄ 2⁵⁄₈ 3⁷⁄₈ HS-*C02 1200 ¹⁄₄ HS-L5 No. (in.) Length Length PG No. 705C ³⁄₃₂ 2¹⁄₂ 3³⁄₄ HS-*C03 1200 ³⁄₁₆ HS-L6 705 ¹⁄₁₆ 2⁵⁄₈ 3⁷⁄₈ HS-*01 705C ⁷⁄₆₄ 2¹⁄₂ 3³⁄₄ HS-*C04 1200 ¹⁄₈ HS-L7 705 ⁵⁄₆₄ 2⁵⁄₈ 3⁷⁄₈ HS-*02 ¹⁄₈ ¹⁄₂ ³⁄₄ ³⁄₃₂ ¹⁄₂ ³⁄₄ 705C 2 3 HS-*C05 705 2 3 HS-*03 CHAMPION CUTTING TOOL CORP. 705C ⁹⁄₆₄ 2¹⁄₂ 3³⁄₄ HS-*C06 705 ⁷⁄₆₄ 2¹⁄₂ 3³⁄₄ HS-*04 705C ⁵⁄₃₂ 2⁷⁄₁₆ 3⁵⁄₈ HS-*C07 High Speed Reduced Shank 705 ¹⁄₈ 2¹⁄₂ 3³⁄₄ HS-*05 705C ¹¹⁄₆₄ 2⁷⁄₁₆ 3⁵⁄₈ HS-*C08 Drill Bit 705 ⁹⁄₆₄ 2¹⁄₂ 3³⁄₄ HS-*06 705C ³⁄₁₆ 2⁷⁄₁₆ 3⁵⁄₈ HS-*C09 705 ⁵⁄₃₂ 2⁷⁄₁₆ 3⁵⁄₈ HS-*07 705C ¹³⁄₆₄ 2⁷⁄₁₆ 3⁵⁄₈ HS-*C10 705 ¹¹⁄₆₄ 2⁷⁄₁₆ 3⁵⁄₈ HS-*08 705C ⁷⁄₃₂ 2⁵⁄₁₆ 3¹⁄₂ HS-*C11 705 ³⁄₁₆ 2⁷⁄₁₆ 3⁵⁄₈ HS-*09 High speed steel, 118 deg. point, black and 705C ¹⁵⁄₆₄ 2⁵⁄₁₆ 3¹⁄₂ HS-*C12 705 ¹³⁄₆₄ 2⁷⁄₁₆ 3⁵⁄₈ HS-*10 bright finish. 705C ¹⁄₄ 2⁵⁄₁₆ 3¹⁄₂ HS-*C13 705 ⁷⁄₃₂ 2⁵⁄₁₆ 3¹⁄₂ HS-*11 Used extensively in maintenance department, 705C ¹⁷⁄₆₄ 2³⁄₁₆ 3³⁄₈ HS-*C14 machine shops, body shops and garages. 705 ¹⁵⁄₆₄ 2⁵⁄₁₆ 3¹⁄₂ HS-*12 705C ⁹⁄₃₂ 2³⁄₁₆ 3³⁄₈ HS-*C15 Their short rigid design and reduced shank, 705 ¹⁄₄ 2⁵⁄₁₆ 3¹⁄₂ HS-*13 make them popular in numerical control 705C ¹⁹⁄₆₄ 2³⁄₁₆ 3³⁄₈ HS-*C16 705 ¹⁷⁄₆₄ 2³⁄₁₆ 3³⁄₈ HS-*14 applications. 705C ⁵⁄₁₆ 2³⁄₁₆ 3³⁄₈ HS-*C17 705 ⁹⁄₃₂ 2³⁄₁₆ 3³⁄₈ HS-*15 Note: Should not be used to enlarge holes 705C ²¹⁄₆₄ 2¹⁄₈ 3¹⁄₄ HS-*C18 705 ¹⁹⁄₆₄ 2³⁄₁₆ 3³⁄₈ HS-*16 Flute Length: 3 1/8 in. 705C ¹¹⁄₃₂ 2¹⁄₈ 3¹⁄₄ HS-*C19 705 ⁵⁄₁₆ 2³⁄₁₆ 3³⁄₈ HS-*17 Overall Length: 6 in. 705C ²³⁄₆₄ 2¹⁄₈ 3¹⁄₄ HS-*C20 705 ²¹⁄₆₄ 2¹⁄₈ 3¹⁄₄ HS-*18 705C ³⁄₈ 2¹⁄₈ 3¹⁄₄ HS-*C21 705 ¹¹⁄₃₂ 2¹⁄₈ 3¹⁄₄ HS-*19 705C ²⁵⁄₆₄ 23¹⁄₈ HS-*C22 705 ²³⁄₆₄ 2¹⁄₈ 3¹⁄₄ HS*-20 Diameter Shank 705C ¹³⁄₃₂ 23¹⁄₈ HS-*C23 Mfg. No. (in.) (in.) PG No. 705 ³⁄₈ 2¹⁄₈ 3¹⁄₄ HS-*21 705C ²⁷⁄₆₄ 23¹⁄₈ HS-*C24 2805 ⁹⁄₃₂ ¹⁄₄ HS-R01 705 ²⁵⁄₆₄ 23¹⁄₈ HS-*22 705C ⁷⁄₁₆ 1⁷⁄₈ 3HS-*C25 2805 ⁵⁄₁₆ ¹⁄₄ HS-R02 705 ¹³⁄₃₂ 23¹⁄₈ HS-*23 705C ²⁹⁄₆₄ 1⁷⁄₈ 3HS-*C26 2805 ¹¹⁄₃₂ ¹⁄₄ HS-R03 705 ²⁷⁄₆₄ 23¹⁄₈ HS-*24 705C ¹⁵⁄₃₂ 1⁷⁄₈ 3HS-*C27 2805 ³⁄₈ ¹⁄₄ HS-R04 705 ⁷⁄₁₆ 1⁷⁄₈ 3HS-*25 705C ³¹⁄₆₄ 1³⁄₄ 2⁷⁄₈ HS-*C28 2805 ¹³⁄₃₂ ¹⁄₄ HS-R05 705 ²⁹⁄₆₄ 1⁷⁄₈ 3HS-*26 705C ¹⁄₂ 1³⁄₄ 2⁷⁄₈ HS-*C29 2805 ⁷⁄₁₆ ¹⁄₄ HS-R06 705 ¹⁵⁄₃₂ 1⁷⁄₈ 3HS-*27 2805 ¹⁵⁄₃₂ ¹⁄₄ HS-R07 705 ³¹⁄₆₄ 1³⁄₄ 2⁷⁄₈ HS-*28 2805 ¹⁄₂ ¹⁄₄ HS-R08 705 ¹⁄₂ 1³⁄₄ 2⁷⁄₈ HS-*29 712 ⁹⁄₁₆ ¹⁄₂ HS-R09 712 ⁵⁄₈ ¹⁄₂ HS-R10 712 ¹¹⁄₁₆ ¹⁄₂ HS-R11 712 ³⁄₄ ¹⁄₂ HS-R12 712 ¹³⁄₁₆ ¹⁄₂ HS-R13 712 ⁷⁄₈ ¹⁄₂ HS-R14 712 ¹⁵⁄₁₆ ¹⁄₂ HS-R15

www.pearlgreen.comwww.pearlgreen.com Tools, Cutting 914-636-0505 Phone 263 914-636-8951 Fax

Diameter Shank CHAMPION CUTTING TOOL CORP. Drill Size Mfg. No. (in.) (in.) PG No. Drill Bit Set Mfg. No. (in.) PG No. ¹⁄₂ ¹⁄₂ 712 1 HS-R16 29-Piece 00632 x 12 MAS-L4 CHAMPION CUTTING TOOL CORP. DEWALT Drill Bit Set 7 Piece Masonry Drill Bit Set 13-Piece

29 piece drill set, 1/16 thru 1/2 x 64ths

13 piece drill set, 1/16 through 1/4 x 64ths Shank 7 Piece, Premium Percussion Masonry Drill Mfg. No. Desc. Size PG No. Bit Set Innovative Tip Configuration Reduces Walking For Improved Accuracy, Improved Mfg. No. Desc. PG No. 129C High HS-SET3 Speed Carbide Tip Provides Up To 2 Times Longer 113C High Speed HS-SET1 Life, Optimum Grade Of Carbide Provides 129CO Cobalt HS-SETC3 113CO Cobalt HS-SETC1 Maximum Durability, Unique Flute Design 129-3/8C High ³⁄₈ HS-SET3R Efficiently Removes Dust Reducing Bit Speed CHAMPION CUTTING TOOL CORP. Binding, Used By General Contractors, Electricians, Mechanical Contractors, Among Drill Bit Set Carbide Masonry Bit Others For A Wide Variety Of Fastening 21-Piece Applications Such As Commercial Shutters, Gutters, Railings & Duct Work Installation, Drilling Holes Up To 1" For Mechanical Anchors & Small Diameter Through Holes, Designed for use in a hammer drill equipped Drilling Smaller Diameter Holes In Soft with a 3 jaw jacobs type chuck. The bits meet Aggregate Materials, Contains 1 Each: ANSI standards and can be used in concrete, Carbide Hammer Drill Bits In Sizes 3/16" x 3, block, brick and soft stone with one standard 1/4" x 4", 5/16" x 6", 3/8" x 6", 1/2" x 6" & 2 1/ pouch 4" x 6" Carbide Hammer Drill Bits.

Drill Size Mfg. No. PG No. Mfg. No. (in.) PG No. DW5207 MAS-SET1 00601 ¹⁄₈ x 3 MAS-01 CM8 ⁵⁄₃₂ x 4 MAS-02 IRWIN INDUSTRIAL TOOLS CM8 ¹¹⁄₆₄ x 4 MAS-03 Wood Drill Bit 21 piece drill set, 1/16 thru 3/8 x 64ths 00604 ³⁄₁₆ x 4 MAS-04 00609 ⁷⁄₃₂ x 4 MAS-05 00612 ¹⁄₄ x 4 MAS-06 Mfg. No. Desc. PG No. CM8 ⁹⁄₃₂ x 4 MAS-07 Fast, clean holes with reduced break out 121C High Speed HS-SET2 00618 ⁵⁄₁₆ x 4 MAS-08 when through-hole drilling 121CO Cobalt HS-SETC2 00622 ³⁄₈ x 6 MAS-09 • Patented micro-groove cutting edge and spurs produce a smoother hole finish 00626 ⁷⁄₁₆ x 6 MAS-10 00631 ¹⁄₂ x 6 MAS-11 • Double spur design scribes the hole before the chips made, producing a cleaner hole 00635 ⁹⁄₁₆ x 6 MAS-12 and reducing vibration ⁵⁄₈ 00638 x 6 MAS-13 • All bits have a 1/4" hex shank that fits all 00645 ³⁄₄ x 6 MAS-14 drills and 1/4" quick change adapters CM8 ⁷⁄₈ x 6 MAS-15 • All bits are 6" long CM8 1 x 6 MAS-16 00614 ¹⁄₄ x 12 MAS-L1 00620 ⁵⁄₁₆ x 12 MAS-L2 Mfg. No. Size (in.) PG No. 00623 ³⁄₈ x 12 MAS-L3 88804 ¹⁄₄ WOOD-A

www.pearlgreen.com 264 Pearlgreen Corporation Tools, Cutting The Industrial Supply Group

Mfg. No. Size (in.) PG No. OLDHAM/US SAW 88805 ⁵⁄₁₆ WOOD-B Masonry Abrasive Circular Mfg. No. PG No. 88806 ³⁄₈ WOOD-C 88899 WOOD-Z Saw Wheel 88807 ⁷⁄₁₆ WOOD-D 88808 ¹⁄₂ WOOD-E EAZYPOWER CORPORATION 88809 ⁹⁄₁₆ WOOD-F Glass/Tile Drill Bit 88810 ⁵⁄₈ WOOD-G 88811 ¹¹⁄₁₆ WOOD-H 88812 ³⁄₄ WOOD-I 88813 ¹³⁄₁₆ WOOD-J 88814 ⁷⁄₈ WOOD-K 88815 ¹⁵⁄₁₆ WOOD-L 88816 1 WOOD-M Glass Drill Bit, Spear Point For Drilling Of 88818 1¹⁄₈ WOOD-N Glass & Ceramic Materials, Carbide Tipped, Ideal For Ceramic Tile, Mirrors & Bottles, 88820 1¹⁄₄ WOOD-O Carded. 88822 1³⁄₈ WOOD-P ¹⁄₂ 88824 1 WOOD-Q Masonry Abrasive Wheel, Universal Arbor. IRWIN INDUSTRIAL TOOLS Mfg. No. Size (in.) PG No. Wood Drill Bit Extension 13302 ¹⁄₈ TG-1 13303 ³⁄₁₆ TG-2 Arbor 13304 ¹⁄₄ TG-3 Mfg. No. Diam. (in.) Size (in.) PG No. ⁵⁄₈ 13305 ⁵⁄₁₆ TG-4 B700MA 7 MASON-07 ⁵⁄₈ Master Mechanic 12" Drill Bit Extension, For 13306 ³⁄₈ TG-5 B800MA 8 MASON-08 All Wood Bits With 1/4" Shanks, 3 Flats On ¹⁄₂ B100MA 10 1 MASON-10 Shank, Follows 5/8" & Larger Bits Through 13307 TG-6 Hole, Heavy Duty, Double Set Screw Type, B120MA 12 1 MASON-12 Adds 12" To Regular Bit Lengths, Allen EAZYPOWER CORPORATION B140MA 14 1 MASON-14 Wrench Included. Glass/Tile Drill Bit Set Masonry Grinding Wheel Threaded Arbor Mfg. No. PG No. 88601 WOOD-12

IRWIN INDUSTRIAL TOOLS Wood Drill Bit Set

4 Piece Set Glass/Tile Carbide Tipped Drill Bits Consists Of 1/8", 3/16", 1/4" And 5/16"

Mfg. No. PG No. Masonry Grinding Wheel with 5/8 - 11 in. 13301 TG-SET threaded arbor

Diameter Mfg. No. (in.) PG No. • Patented micro-groove cutting edge and spurs produce a smoother hole finish 641664 4¹⁄₂ MASON-04AH • Double spur design scribes the hole before 122294 7 MASON-07H the chips made, producing a cleaner hole 41308 9 MASON-09H and reducing vibration • Shorter bit length gets into confined spaces (between studs) where standard lengths will not fit • All bits have a 1/4" hex shank that fits all drills and 1/4" quick change adapters

www.pearlgreen.comwww.pearlgreen.com Tools, Cutting 914-636-0505 Phone 265 914-636-8951 Fax

DEWALT INDUSTRIAL TOOLS Diam. Arbor Max DEWALT Masonry Cutting & Grinding Mfg. No. (in.) Size (in.) RPM PG No. Metal Cutting Wheel B120ME3 12 1 6300 METAL- Threaded Arbor Wheel 12 Depressed Center B140ME3 14 1 5400 METAL- 14

DEWALT INDUSTRIAL TOOLS Metal Cutting Wheel Depressed Center

General Purpose Metal Depressed Center Wheel, Double Reinforced With Industrial Grit 4-1/2 in. Diameter Masonry Depressed & Glue For Increased Life & Durability, Center Wheel, Double Reinforced With Superior Friability Allows The Wheel To Break Industrial Grit & Glue For Increased Life & Down Quickly Consistently Exposing New Durability, Superior Friability Allows Wheel To Grain For Increased Sharpness & Longer Life, Break Down Quickly Consistently Exposing Metal Fast Cut, Bulk. Arbor: 5/8 - 11 in. New Grain For Increased Sharpness & Longer Life, For Low Angle & Vertical Metal Grinding Wheel, Double Reinforced Grinding. Max RPM: 12000. With Industrial Grit & Glue For Increased Life & Durability, Superior Friability Allows Wheel Diameter To Break Down Quickly Consistently Exposing Mfg. No. (in.) PG No. New Grain For Increased Sharpness & DW4523 4¹⁄₂ METAL-04AH Thickness Longer Life, For Low Angle & Vertical Mfg. No. (in.) PG No. Grinding. DW4999 7 METAL-07H DW4524 ¹⁄₄ MASON-04A14 DW4954 9 METAL-09H DW4528 ¹⁄₈ MASON-04A18 FLEXOVIT Diam- Thick OLDHAM/US SAW Mfg. eter ness Arbor Max PG Metal Cuting Wheel Metal Abrasive Circular Saw No. (in.) (in.) (in.) RPM No. Thin Angle Grinder Cutoff Wheel DW4 4 ¹⁄₄ ⁵⁄₈ 13500 METAL Wheel 419 -0414 DW4 4 ¹⁄₈ ⁵⁄₈ 13500 METAL 418 -0418 DW4 4¹⁄₂ ¹⁄₄ ⁷⁄₈ 12000 METAL 514 -04A14 DW4 4¹⁄₂ ¹⁄₈ ⁷⁄₈ 12000 METAL 518 -04A18

For sheet, pipe, rod, cable and all profiles, Metal Abrasive Wheel, Universal Arbor. • Delivers razor-sharp, clean cutting action on carbon steel, stainless and other alloys • Delivers the fastest, razor-sharp cutting Diam. Arbor Max action in the industry Mfg. No. (in.) Size (in.) RPM PG No. • Double fiberglass reinforcing and extra B700ME 7 ⁵⁄₈ 7500 METAL- durable bond formulations deliver excep- 07 tional wheel life in the toughest of applica- tions B800ME 8 ⁵⁄₈ 7500 METAL- 08 • Fast cutting B100ME3 10 1 6300 METAL- • Versatile 10

www.pearlgreen.com 266 Pearlgreen Corporation Tools, Cutting The Industrial Supply Group

• Diameter: 4 1/2 in. DEWALT Plywood Veneer Steel Blade • Arbor Thickness: 0.045 x 7/8 in. Carbide Blade • Maximum RPM: 13300 • Box per Carton: 25/100

Mfg. No. PG No. F1207 METAL-04A045 Carbide Blade

Smooth, clean cutting of plywood and veener 6-1/2 in., 18 Teeth Carbide Tipped Circular • Teeth: 186 Saw Blade, 5/8 in. Round Diamond Knock Out Arbor, Tougher Tungsten Carbide Stays • Arbor (in.): 5/8 Sharper Longer, Ribbed Heat Vents Allow • Diamter (in.) 7-1/4 Blade To Run Cooler, Reducing Blade Flexing and Binding, Thin Kerf For Smoother Cutting, • Pack; 10 per box, 50 per case Anti-Stick Coating Reduces Friction and Gum Up, Carded. Mfg. No. PG No. 35031 COMB-7P • C2 tungsten carbide alloy teeth Mfg. No. PG No. • Designed for framing, crosscutting and rip- DW3161 CARBIDE-0618 Turbo Diamond Blade ping of ply woods, composition board, hard and soft woods Combination Rip Steel • Alternate top bevel ground teeth Blade • Arbor: 5/8 in. • Pack: 5 per box; 25 per case

Diameter Mfg. No. (in.) Teeth PG No. 36105 7¹⁄₄ 24 CARBIDE- 0724 36107 7¹⁄₄ 40 CARBIDE- 0740 36110 8¹⁄₄ 24 CARBIDE- 0824 36112 8¹⁄₄ 40 CARBIDE- Dry cutting continuous rim. For cutting hard 0840 materials, granite, natural stone and hard concrete 36118 10 40 CARBIDE- 1040 Designed for general-purpose ripping, • Arbor (in.) 5/8, 7/8 36120 10 60 CARBIDE- crosscutting and mitering in all woods 1060 • Diameter (in.): 7 1/4 Mfg. No. Diam (in.) PG No. • Teeth: 32 38050 4 DIAMOND-04 • Arbor: 5/8 in. 38052 4¹⁄₂ DIAMOND-04A • Pack: 10 per box, 50 per case 38054 7 DIAMOND-07 38055 8 DIAMOND-08 38057 10 DIAMOND-10 Mfg. No. PG No. 37048 14 DIAMOND-14 35041 COMB-7 37048 12 DIAMOND-12

www.pearlgreen.comwww.pearlgreen.com Tools, Cutting 914-636-0505 Phone 267 914-636-8951 Fax

Bench Grinder Wheel DEWALT INDUSTRIAL TOOLS Grout Saw Flexible Rubber Backing Pad

• For General Purpose Grinding of Carbon and Stainless Steel and Other Alloys

• Precision balanced for vibration-free run- Removes damaged grout from between tiles. ning Double blade design; carbide grit blade cuts • Material: Aluminum Oxide, Medium Grit grout quickly, toothed blade clears cutting debris. Offset blade mount keeps knuckles • Thickness: 1 in. Rubber Backing Pad. Assembly with 5/8 in. - away from work. High impact. • Arbor Size: 1 in. 11 clamp nut • Max RPM: 4000 Mfg. No. PG No. Mfg. No. Size (in.) PG No. 10012 GROUTSAW DW4942 4¹⁄₂ ANGLE-Z4 Diameter Max Grout Saw Blade Mfg. No. (in.) RPM PG No. Wall Scraper Blade 6006 6 4138 BENCH-G6 6001 8 3600 BENCH-G8

ALI INDUSTRIES Combination Sharpening Stone

Replacement blades for 10012 groutsaw. One carbide grit blade. One toothed blade

4 in., Multi Purpose Scraper Tool Mfg. No. PG No. Replacement Blades, Fits Model #98014 Zinsser Multi Purpose Scraper Tool Or Any 10025 GROUTSAW-B Standard 4" Scraper Tool. Pack: 10 DEWALT INDUSTRIAL TOOLS Jig Saw Blade 6" x 2" x 1", Combination Sharpening Stone. Mfg. No. PG No. Wood 98015 SCR-W-B

Mfg. No. PG No. Floor Scraper Blade High carbon steel high performance blades 6060 STONE-SHARP • Length: 4 in., TPI: 6, Blade Type: Fast, Rough Wood Cutting, Qty: 5 • High carbon steel blades • Balde thickness - 0.035" Mfg. No. PG No. • Length: 8 in. DW3700 DW-3700 • 3 per pack

Mfg. No. PG No. 11185 SCR-ADJ-B

www.pearlgreen.com 268 Pearlgreen Corporation Tools, Cutting The Industrial Supply Group

DEWALT INDUSTRIAL TOOLS Blade Jig Saw Blade Length Teeth per Mfg. No. (in.) Inch PG No. Mfg. No. PG No. Metal DW4811 6 18 DW-4811 MM0970-06 SCR-SE-B

DEWALT INDUSTRIAL TOOLS STANLEY TOOLS Bi-Metal Wood Cutting Blade Utility Knife Razor Blade High carbon steel high performance blades • Length: 3 in., TPI: 18, Blade Type: Medium Metal Cutting, Qty: 5 • Teeth per Inch: 6 Mfg. No. PG No. • Taper Back blade type DW3724 DW-3724 • 100 per pack Wall display dispenses high carbon steel blades, one at a time, for safety and LENOX convenience. Blades are .025" thick x 2 1/4" Jig Saw Blade Blade long. Used on Stanley knives ST10099 and Bosch Style Mfg. No. Length (in.) PG No. ST10499, and interchangeable with most other makes of utility knives. 100 Pack. DW4802B 6 DW-4802 DW4803B 9 DW-4803 DW4804B 12 DW-4804 Mfg. No. PG No. LENOX 11-921 ST11-921 Bi-Metal Sawzall Blade Utility Knife Razor Blade Tuff Tooth™

Bi-Metal Sawzall Blade; 50 per pack Super sharp to cut fast without deflection • Smooth finish, ground to precision sharp- 100 Pack, Heavy Duty .025 Gauge, SK2 ness for straighter cuts and a smoother fin- Blade Professional Utility Blade Dispenser, Fits All ish Mfg. Length Teeth Retractable Utility Knives, New Safety Pusher Button, 4 Notch, Ultra Hi Impact Double Track • Ideal for woodworking, designed for opti- No. Cuts (in.) per In. PG No. mal performance B110R Metal 12 10/14 L-110R Ratchet. • Shatter resistant, bi metal technology B156R Wood 12 6 L-156R flexes and resists breaking and extends B614R Metal 6 14 L-614R blade life Mfg. No. PG No. B618R Metal 6 18 L-618R 704583 UTILITY-B B624R Metal 6 24 L-624R Mfg. No. Applications PG No. B636R Plaster 6 6 L-636RP Wire Cup Brush 20805-314S For thick L-B314S B656R Wood 6 6 L-656R metal cutting B956R Wood 9 6 L-956R 20802-406S For fast, L-B406S B810R Metal 8 10 L-810R rough wood cutting B818R Metal 8 18 L-818R

DEWALT INDUSTRIAL TOOLS AMERICAN SAFETY RAZOR COMPANY Bi-Metal Metal Cutting Blade Single Edge Razor Blade

6" Crimped Wire Cup Brush, .020 Carbon Steel Wire, Coarse 5/8"-11 Arbor, 6,600 Rpm, Straight Back blade type; 100 per pack Designed For General Purpose Applications, Flexible Wire Adapts To Irregular Surfaces, Excellent For Removal Of Rust, Paint, Scale & Blade Light Burrs, Display Packaged. Length Teeth per 100 Pack .009" Single Edge Razor Blade, Fits Mfg. No. (in.) Inch PG No. All Standard Razor Blade Tools, High Carbon DW4807 4 14 DW-4807 Surgical Steel, For Scraping, Cutting & Diameter Trimming Wallpaper, Upholstery, Paint, Glass, DW4808 6 14 DW-4808 Mfg. No. (in.) RPM PG No. Etc., Each Blade Protected In Shelling Paper. DW4809 8 14 DW-4809 36031 3 14000 ANGLE- W3

www.pearlgreen.comwww.pearlgreen.com Tools, Cutting 914-636-0505 Phone 269 914-636-8951 Fax

Diameter Wire Wheel Brush DASCO Mfg. No. (in.) RPM PG No. Bull Point Chisel 36036 4 9000 ANGLE- W4 36037 6 6600 ANGLE- W6 Wire Wheel Brush

4" Standard Twist Knot Wire Wheel Brush, Bull Point Chisel for breaking up concrete .014 Carbon Steel Wire, Coarse, 5/8"-11 floors, sidewalks, and paving slabs when Arbor, 20,000 RPM. impractical to use an air hammer • Forged of hard, HIGH CARBON steel • Starts faster, cuts easier, and lasts longer Mfg. No. PG No. • Blue rust-resistant finish Crimped Wire Wheel Brush, Medium Face, 36012 ANGLE-WB4 .014 Carbon Steel Wire, Medium/Coarse. 1/2"- • Targethead design increases striking area DASCO 5/8" Arbor, Designed For General Purpose • Made in the U.S.A. Applications, Flexible Wire Adapts To Irregular Cold Chisel Surfaces, Excellent For Removal Of Rust, Paint, Dirt, Light Burrs, Surface Blending & Polishing. Mfg. No. Size (in.) PG No. 480 ³⁄₄x12 D-480 485 1x12 D-485 Mfg. No. Size (in.) PG No. DASCO 36063 5 BENCH-W5 36003 6 BENCH-W6 Floor Chisel 36006 8 BENCH-W8 Wire Wheel Brush

Excellent for cutting and shaping when extra length is needed for easy access. Targethead design increases striking area, reduces spalling and mushrooming. For use on metal softer than the cutting edge, cast iron, wrought iron, steel, bronze and copper.

Mfg. No. Size (in.) PG No. Dasco Floor Chisel 405 ¹⁄₂ x 6¹⁄₂ D-405 • Heat treated high carbon steel 441 ¹⁄₂ x 12 D-441 • Head design increases striking area Wire Wheel Brush, 1/4 Shank, Stem Mounted, 410 ³⁄₄ x 12 D-410 For Use On Electrical Tools That Operate At 419 1 x 12 D-419 • For removing flooring materials Speeds Up To 4,500 RPM. • Pouched

Mfg. No. PG No. Mfg. No. Size (in.) PG No. 842735 DRILL-W2 471 3 x 11 D-471 842736 DRILL-W3 472 2¹⁄₂ x10 D-472 842737 DRILL-W4 473 2 x10 D-473

www.pearlgreen.com 270 Pearlgreen Corporation Tools, Cutting The Industrial Supply Group

DASCO STANLEY TOOLS BOSCH TOOLS Brick Chisel Wood Chisel Hammer Steel SDS-max®

Thin blades 3" long. Extra long tough handle designed for balance and grip. Crown-shaped cap centers hammer blows. Blade and tang forged from one piece of high-quality, cutlery- grade steel. • Length: 9 in. Pack: 2 per box

Mfg. No. Width (in.) PG No. ¹⁄₄ High carbon steel construction designed for 16-304 ST16-304 scoring, cutting and trimming bricks and 16-306 ³⁄₈ ST16-306 Bull Point, Fits SDS-max® hammers, blocks. Sharp, durable cutting edge. 16-308 ¹⁄₂ ST16-308 competitive SDS-max® drive hammers and Targethead design increases striking area, ⁵⁄₈ Hilti hammers using TE-Y and TE-FY shanks, reduces spalling and mushrooming. 16-310 ST16-310 Bulk pack of 25 16-312 ³⁄₄ ST16-312 16-316 1 ST16-316 Mfg. No. Size (in.) PG No. 16-320 1¹⁄₄ ST16-320 Mfg. No. Size (in.) PG No. 434 2¹⁄₂x7 D-434 16-324 1¹⁄₂ ST16-324 HS-1913 12 B-1913 435 3x7 D-435 STANLEY TOOLS HS-1914 18 B-1914 436 3¹⁄₂x7 D-436 437 4x7 D-437 Wood Chisel Set BOSCH TOOLS Hammer Steel DASCO Chisel Set SDS-max®

3-Piece Wood Chisel Set. Includes 1/2”, 3/4” and 1” chisels.

Flat Chisel, Fits SDS-max® hammers, 3-Piece Chisel Set. Heat treated, high carbon competitive SDS-max® drive hammers and steel. Targethead design increases striking Mfg. No. PG No. Hilti hammers using TE-Y and TE-FY shanks, area reduces spalling and mushrooming. One 16-150 ST16-150 Bulk pack of 25 Each Nos.: 401 cut 5/16”, length 5-1/4”, No. 406 cut 5/8”, length 6-3/4” and No. 408 cut 3/4”, length 7-1/8” included. Mfg. No. Size (in.) PG No. HS-1911 1 x 12 B-1911 Mfg. No. PG No. HS-1912 1 x 18 B-1912 44 D-044

www.pearlgreen.comwww.pearlgreen.com Tools, Cutting 914-636-0505 Phone 271 914-636-8951 Fax

BOSCH TOOLS BOSCH TOOLS BOSCH TOOLS Scaling Steel Hammer Hex Collar Steel 3/4 Hex Flat Steel Hammer Chisel Chisel SDS-max®

Demolition Hammer Steel, Flat Chisel, 3/4 Hex Shank Type, Overall Length 12 in, Blade Scaling Chisel, Fits SDS-max® hammers, Width 1 in. For Use with 3/4 Hex Demolition competitive SDS-max® drive hammers and Tools, Application For General Chiseling and Hilti hammers using TE-Y and TE-FY shanks, Breaking Work In Brick & Concrete. Also Bulk pack of 25 capable of edging, digging gravel roads, compacting, grooving, cutting, stripping, and roughing.

Mfg. No. Size (in.) PG No. HS-1910 3 x 12 B-1910 All tools are 1 1/8" hex shank with internal lock Mfg. No. Length (in.) PG No. HS-1916 1¹⁄₂ x 12 B-1916 for hammer model 11304 and have an external collar for use with standard HS1517 12 B-1517 HS-1917 2 x 12 B-1917 pneumatic hammers. Type: Moil Point, HS1518 20 B-1518 Application: General Chipping Work, Overall BOSCH TOOLS Length: 20 1/2 in. COOPER TOOLS Hammer Steel Bolt Cutter SDS-max® Mfg. No. PG No. H.K.Porter® HS-2161 B-2161

BOSCH TOOLS Hex Collar Steel Scraping Chisel, Size: 2 x 12 in. Fits SDS- max® hammers, competitive SDS-max® drive hammers and Hilti hammers using TE-Y and • General plant maintenance tool TE-FY shanks. • Drop-forged, precision ground, alloy tool steel jaws with center-cut blades All tools are 1 1/8 in. hex shank with internal • Cuts soft, medium, or hard materials Mfg. No. PG No. lock for hammer model 11304 and have an HS-1915 B-1915 external collar for use with standard • Maximum hardness of material to be cut: pneumatic hammers. Type: Flat Chisel, Brinell 455/Rockwell C48 BOSCH TOOLS Application: Starts Holes in Concrete Slabs, • Lockplate keeps jaws from loosening Overall Length: 20 1/2 in. Hammer Steel • Toggle joints turns 50 lbs., hand pressure SDS-max® to 4000 lbs. cutting pressure Mfg. No. PG No. • Screw-type adjustments realigns edges HS-2163 B-2163 • Steel handles with rubber grips

BOSCH TOOLS 3/4 Hex Point Hammer Length Chisel Mfg. No. Desc. (in.) PG No. 1490MC Cutter 14 BC-14 1413C Head 14 BC-H14 Only Bushing Tool One Piece, Size: 16 Tooth Head 0090MC Cutter 18 BC-18 1 3/4 in. Square x 9 1/4 in. Fits SDS-max® Demolition Hammer Steel, Bull Point, 3/4 Hex hammers, competitive SDS-max® drive Shank Type. For Use With 3/4 Hex Demolition 0013C Head 18 BC-H18 hammers and Hilti hammers using TE-Y and Tools, Application For Starting Holes In Only TE-FY shanks. Concrete. Also capable of edging, digging 0190MC Cutter 24 BC-24 gravel roads, compacting, grooving, cutting, 0113C Head 24 BC-H24 stripping, and roughing. Only Mfg. No. PG No. 0290MC Cutter 30 BC-30 HS-1909 B-1909 0213C Head 30 BC-H30 Mfg. No. Length (in.) PG No. Only HS1515 12 B-1515 0390MC Cutter 36 BC-36 HS1516 20 B-1516 0313C Head 36 BC-H36 Only

www.pearlgreen.com 272 Pearlgreen Corporation Tools, Cutting The Industrial Supply Group

COOPER TOOLS RIDGE TOOL COMPANY RIDGE TOOL COMPANY Cable Cutter Pipe Cutter Tubing Cutter H.K.Porter®

An economical tool for general cutting, shear- cut blades, cuts soft and hard steel cable, wire rope and small, ACSR cable, 28 in. in length

Mfg. No. PG No. Screw feed cutter. Clean, square cuts are 0290FHJ CCUTTER-28 easily made on copper, brass, aluminum, and Fast, clean pipe cutting by hand or power. thin-wall conduit. Feature a convenient fold- FLETCHER TERRY COMPANY Extra-long shank protects adjustment threads, away reamer. No.32940 is rated for larger while an extra-large handle is provided for diameter steel and stainless steel tubing. Glass Cutter quick, easy adjustment. Can be converted to Gold Tip® 3-wheel cutter by replacing rollers with cutter wheel, or can be ordered as 3-wheel model for use in areas where a complete turn is not Model Capacity possible. Mfg. No. No. (in.) PG No. ¹⁄₈ Model No.: 2-A, Pipe Capacity Nominal Size: 32910 10 - 1 R-32910 1/8 - 2 in. (3 - 50 mm). 32920 15 ³⁄₁₆ - 1¹⁄₈ R-32920 32930 20 ⁵⁄₈ - 2¹⁄₈ R-32930 32940 30 1 - 3¹⁄₈ R-32940 Mfg. No. Model No. PG No. 32820 2-A R-32820 RIDGE TOOL COMPANY Tubing Cutter RIDGE TOOL COMPANY Tubing Cutter

Gold tip ball end. Carbide tip glass cutter.

Mfg. No. PG No. 01-840 GCUTTER-C

FLETCHER TERRY COMPANY Plexiglass Cutter Midget Cutter. Designed for use in restricted Quick-acting cutter. Features a quick-acting ScoreMate® spaces on small diameter, hard and soft design, I-beam construction, hardened wear copper, aluminum, brass, and plastic tubing. surfaces, fold-away reamers, and thrust Strong, lightweight slide and wheel housing, bearing slide assemblies for smooth large knurled feed screw knob gives easy operation. These cutters are available in control of cutting pressure for clean cuts. models for plastic pipe or metallic tubing. • Std. Wheel: E-3469, #40617 with spare Features an enclosed feed screw to eliminate It is a double edged plexiglass scoring tool, wheel clogging and jamming, grooved rolls for close- ideal for any job to-flare cuts, and a fold-away reamer. Made from high-strength zinc alloy with a spare cutter wheel in the handle. Cuts copper, Model Capacity brass, and aluminum tubing, and thin-wall Mfg. No. No. (in.) PG No. Mfg. No. PG No. conduit. ¹⁄₄ ¹⁄₈ 05-111 PLEXI 40617 101 - 1 R-40617 32975 103 ¹⁄₈ - ⁵⁄₈ R-32975 32985 104 ³⁄₁₆ - ¹⁵⁄₁₆ R-32985 Model Capacity Mfg. No. No. (in.) PG No. 31622 150 ¹⁄₈-1¹⁄₈ R-31622 31632 151 ¹⁄₄ - 1⁵⁄₈ R-31632 31642 152 ¹⁄₄ - 2⁵⁄₈ R-31642

www.pearlgreen.comwww.pearlgreen.com Tools, Cutting 914-636-0505 Phone 273 914-636-8951 Fax

RIDGE TOOL COMPANY CHAMPION CUTTING TOOL CORP. Tubing Cutter Pipe Tap Mfg. No. PG No. 21749 TAP/DIE

CHAMPION CUTTING TOOL CORP. Screw and Pipe Extractor

NPT, regular hook, carbon steel. These taps Spiral flute. Designed to be held in a tap are used ordinarily for tapping pipe fittings and wrench for the removal of broken screws, also have numerous other applications. The studs, bolts or pipe fittings. The left hand diameter of the tap increases from the rotation of the tapered flutes forces out almost Model No. 205. Has enclosed feed screw to entering end of the thread portion at the rate any right hand threaded part. Penetrating oil eliminate clogging and jamming, grooved rolls of 3/4 in. per foot, the angle formed by the can be helpful in removing rusty or corroded for close-to-flare cuts, and a fold-away reamer. sides of the thread is 60 deg. parts. Made from high-strength zinc alloy with a spare cutter wheel in the handle.Cuts copper, brass, and aluminum tubing, and thin-wall conduit. Overall Mfg. No. Drill Size Length PG No. Mfg. No. Size Length PG No. ⁵⁄₆₄ • Std. Wheel: E-3469 X1 2 SE-1 304 ¹⁄₈ 2¹⁄₈ TAP-P1 X1 ⁷⁄₆₄ 2³⁄₈ SE-2 • Capacity: 1/4 - 2 3/8 in. 304 ¹⁄₄ 2⁷⁄₁₆ TAP-P2 X1 ⁵⁄₃₂ 2¹¹⁄₁₆ SE-3 304 ³⁄₈ 2⁹⁄₁₆ TAP-P3 X1 ¹⁄₄ 2⁷⁄₈ SE-4 304 ¹⁄₂ 3¹⁄₈ TAP-P4 Mfg. No. Model No. PG No. X1 ¹⁷⁄₆₄ 3³⁄₈ SE-5 304 ³⁄₄ 3¹⁄₄ TAP-P5 33055 205 R-33055 X1 ¹³⁄₃₂ 3³⁄₄ SE-6 304 1 3³⁄₄ TAP-P6 X1 ¹⁷⁄₃₂ 4¹⁄₈ SE-7 CHAMPION CUTTING TOOL CORP. 304 1¹⁄₄ 4TAP-P7 X1 ¹³⁄₁₆ 4³⁄₈ SE-8 304 1¹⁄₂ 4¹⁄₄ TAP-P8 Hand Tap X1 1¹⁄₁₆ 4⁵⁄₈ SE-9 High Speed 304 2 4¹⁄₂ TAP-P9 CHAMPION CUTTING TOOL CORP. VERMONT AMERICAN Screw and Pipe Extractor Set Tap and Die Set

Ground thread. Operated in tap wrenches or production tapping heads for general purpose Includes 1 to 6 extractors tapping in a variety of materials. They are supplied in standard H limits that will provide an adequate class of fit for standard tapping applications. Mfg. No. PG No. X1 SE-SET

Overall GENERAL TOOLS COMPNAY Mfg. No. Size Length PG No. Countersink 308 4-40 1⁷⁄₈ TAP-01 308 6-32 2 TAP-02 308 8-32 2¹⁄₈ TAP-03 308 10-32 2³⁄₈ TAP-04 308 10-24 2³⁄₈ TAP-05 40 piece tap and die set in plastic case that 308 12-24 2³⁄₈ TAP-06 includes the following: tap and 1 hexagon die szies 4-40 NC taper, 6-32 NC taper, 8-32 NC 308 1/4-20 2¹⁄₂ TAP-07 taper, 10-24 NC taper, 12-24 NC taper, 1/4-20 308 5/16-18 2²³⁄₃₂ TAP-08 NC taper, 5/16 MC taper, 3/8-16 NC plug, 7/ 308 3/8-16 2¹⁵⁄₁₆ TAP-09 16-14 NC plug, 1/2-13 NC plug, 1-32 NF taper, 1/4-28 NF taper, 5/16-24 NF taper, 3/8-24 NF 308 7/16-14 3⁵⁄₃₂ TAP-10 plug, 7/16-20 NF plug, 1/2-20- NF plu and 1/8- 308 1/2-13 3³⁄₈ TAP-11 27 NPT pipe: one die stock for 1 round or hexagon dies; one tap wrench for tap sizes No. 4 through 1/2; one T-handle tap wrench for tap sizes No. 0 through 1/4; one T-handle tap wrench for tap sizes 1/4 through1/2; one HS Countersink, Pattern Cutting Flutes That thread gauge for 10 to 40 US threads; and Assure Chatter Free Countersink On Steel, one No. 5 screwdriver. Brass, Aluminum & Wood, Made Of High Speed Steel With 5 Flutes, 82 Degree Point Angle With 1/4" Round Shank.

www.pearlgreen.com 274 Pearlgreen Corporation Tools, Cutting The Industrial Supply Group

STANLEY TOOLS GREAT NECK SAW Quick Change Utility Knife Lightweight Lockback Utility Mfg. No. Size (in.) PG No. 195-1/2 ¹⁄₂ CSK-1 Knife 195-5/8 ⁵⁄₈ CSK-2 Sheffield 195-3/4 ³⁄₄ CSK-3 Snap Off Knife

With retractable blade and automatic blade storage magazine. Furnished with (3) ST11921 heavy duty blades. String cutting feature in body. Adjustable blade positions. Snap Off Knife, Plastic Body, Positive Locking Blade does not have to be exposed. Die cast Action, 1 Blade included aluminum construction. Length: 6 in.

Mfg. No. Size Point PG No. 704807 Small 13 BREAKAWAY Mfg. No. PG No. 704815 Large 8 BREAKAWAY-L 10-499 ST10-499 Folding Lock Back Utility Knife, Lightweight Utility Knife Aluminum Blue Handle, Quick Change Blade Snap Off Knife Blade Mechanism, 1 Hand Opening, Belt Clip, Accepts All Standard Utility Blades, Includes:1 Blade, Sheffield Brand.

Mfg. No. PG No. 12113 UTILITY-S

GREAT NECK SAW Lockback Utility Knife Sheffield

6 in., Zinc Pro Heavy Duty Retractable Blade 5 Pack, Snap Blade, Fits All Standard Snap Utility Knife, Accepts All Utility Blades, Zinc Off Knives, SK2 High Carbon Knife Steel Body, Overlap Nose For Protection, 3 Locked Blade Positions, Blade Storage In Handle, For Cutting Drywall, Fiberglass, Wood, Plastic, Mfg. No. Size Point PG No. Cardboard, 2 Blades Included. 704702 Small 13 BREAKAWAY-B 704716 Large 8 BREAKAWAY-LB Mfg. No. PG No. STANLEY TOOLS MM0970-43 UTILITY Utility Knife Retractable Carton Cutter

Folding Lock Back Utility Knife With Hardwood Handle, Quick Change Blade Mechanism & 1 Hand Opening, Folds To 3-5/ 8", Uses Standard Utility Knife Blades, Grey enamel finish. Button projects and Includes 1 Blade, Sheffield Brand. retracts blade to 3 positions: full, half and one- quarter out. Lightweight aluminum handle is in two sections - provides blade storage. Furnished with (3) ST11921 heavy duty Mfg. No. PG No. blades. 12115 UTILITY-SW Length: 6 in. Retractable Carton Cutter, Accepts All Single Edge Blades, All Metal Design

Mfg. No. PG No. 10-099 ST10-099 Mfg. No. PG No. 704694 CUTTER

www.pearlgreen.comwww.pearlgreen.com Tools, Cutting 914-636-0505 Phone 275 914-636-8951 Fax

GREAT NECK SAW STANLEY TOOLS STANLEY TOOLS Heavy Duty Lockback Utility Compass Saw Jab Saw Knife Sheffield

Professional Wallboard Jab Saw, Cushioned Grip, Ergonomic, Curved Handle, Blade Is 6" Length, Fully Hardened & Tempered For Strength & Durability, Blade Is Epoxy Bonded To Handle For A Secured Fit, Teeth Are Designed To Cut Fast & Will Not Clog, Sharp Tip For Plung Cuts, Carded. • For cutting out curved shapes in wood, Sheffield Heavy Duty Lockback Utility Knife plasterboard or plywood with Pouch, Heavy Duty Aluminum • High grade tempered steel blades Construction For Strength, Oversized Mfg. No. PG No. • Teeth precision set and sharpened for fast Ergonomic Grip To Reduce Fatigue, Quiick 15-556 ST15-556 Change Blade Mechanism, 5 Extra Blades and smooth cutting Stored In Handle, Includes 6 Utility Blades, • Blade Length: 12 in., Points per Inch: 8 STANLEY TOOLS Accepts All Standard Utility Blades, Back Lock. Back/Mitre Saw Mfg. No. PG No. 15-212 ST15-212 Mfg. No. PG No. 12331 UTILITY-SZ GREAT NECK SAW Compass Saw STANLEY TOOLS • Blade Length: 14 in., Width Under Back: 3 Short Handsaw 3/16 in., Points per Inch: 13 • For general use in connection with mitre box and cabinet work • Stiff blade with heavy steel back 12", 8 Point, Compass Saw, Full Sized Pistol • Solid hardwood has oil finish Grip ABS Handle. 9 Point Contractor Grade Crosscut Hardened • Aluminum handle hardware Teeth Toolbox Handsaw Tell-Sell Storage Sleeve Back Of Saw Used To Mark Angles. Mfg. No. PG No. P312 GN-P312 Mfg. No. PG No. 15-636 ST15-636 Mfg. No. Length (in.) PG No. STANLEY TOOLS 15-085 15 ST15-085 Mini Utility Saw STANLEY TOOLS 15-087 20 ST15-087 Back/Dovetail Hacksaw

STANLEY TOOLS Long Handsaw

10", 13 Point, Fine Woodworking Back/ 10", 12 Point, Mini Utility Sharptooth Saw, Dovetail Saw With Reversing Handle, Offset Induction Hardened Teeth Stay Sharp 3 To 5 Handle For Flush Cutting & The Ability To Times Longer Than Standard Teeth, 3 Sided 26” Point Contractor Grade Short Cut Reverse The Handle For Right Hand Or Left Tooth Design Cuts 50% Faster, 10" Blade Is Handsaw Hardened Teeth Tell-Sell Storage Hand Cuts, Makes This Saw One Of Our Most Ideal For Access In Tight Spaces & For Sleeve Versatile Saws, The 3" Wide Blade Has A Stiff Cutting A Variety Of Materials Such As Steel Back For True Cuts. • Multi-purpose saw for a high quality finish Plastic, Pipe, Particle Board & Wood, Contoured Handle Fits The Hand • For use on laminate, plastic pipe, and all Comfortably. wood types Mfg. No. PG No. • SharpTooth™ Saw Technology uses three 15-252 ST15-252 cutting surfaces to cut 50% faster than con- ventional Stanley Hand Saws Mfg. No. PG No. • Induction hardened teeth stay sharp 3 to 5 20-221 ST20-221 times longer than standard teeth

Mfg. No. PG No. 20-065 ST20-065

www.pearlgreen.com 276 Pearlgreen Corporation Tools, Cutting The Industrial Supply Group

LENOX STANLEY TOOLS COOPER TOOLS High Tension Hacksaw Rubber Grip Hacksaw Mini Utility Hacksaw Nicholson®

• For professionals and homeowners Rigid steel frame is adjustable for 8", 10", and 12" blades. Allows blade to be faced in four • Gets into small places, makes difficult cut- directions. Depth of throat is 3 7/8". Rubber ting jobs easy grip. 6 per box. • Will fit into any tool box • Uses any standard size hacksaw blade Heavy-duty cast aluminum handle and steel • Comes complete with high quality Nichol- crossbar are the perfect balance of lightweight Mfg. No. PG No. son® SS1024 hacksaw blade and super strength, providing the user with 15-265 ST15-265 straight, fast cutting. • Blister packed on attractive cards with sug- gested uses on back • Lever tensions the 12" (300 mm) hacksaw COOPER TOOLS blade to 30000 PSI (21 kg. sq. mm), about Hacksaw Packed: Carded, Blade Length: 10 in., Blade twice that of ordinary frames Length: 254 mm, Pack Weight: 1.40 lbs., Pack Nicholson® Weight: 652 g, Shelf Pack: 6 • Mount blade at 45 deg. for flush cutting jobs • Use frame as job saw, set screw holds Mfg. No. PG No. blade in position 80968 N-80968 • Use as a compass saw with 20585-156R reciprocating blade LENOX • Store spare blades inside tubular back Hacksaw Blade • 1 per pack, 5 per box • Instantly adjustable for the sake of 10 in. and 12 in. blades. • Adjusts 90' in opposition to perpendicular Mfg. No. PG No. or level cuts. 20918-4012 L-4012

STANLEY TOOLS Mfg. No. PG No. High Tension Hacksaw 80951 N-80951 STANLEY TOOLS Mini Utility Hacksaw

These blades with their Tuff Tooth™ design and tooth hardness of Rc 64-66 are very flexible, have shock resistant teeth, resist heat and are virtually unbreakable. Ideal for cutting Professional Adjustable, High Tension tough materials like stainless steel. Hacksaw, Holds Blades Up To 32,000 PSI, Blade Storage In Frame, Tension Guide On • L x W: 12 x 1/2 in. Handle Lever, Blade Extends Out Nose Of Frame, Can Be Locked Into Place For Tight • Teeth per Inch: 24 Corners, Tell-Sell Sleeve. • Electron beam weld • High speed steel edge

Mfg. No. PG No. • Flexible spring steel back 15-113 ST15-113 • Bulk packed 100 per pack

Metal Mini Hack Utility Handsaw, Cast Aluminum Handle Built For Durability, Mfg. No. PG No. Comfortable Handle Design, Supplied With A High Performance, 10" Bi-Metal Blade. 20117 HS-BLADE

Mfg. No. PG No. 15-809 ST15-809

www.pearlgreen.comwww.pearlgreen.com Tools, Cutting 914-636-0505 Phone 277 914-636-8951 Fax

MILWAUKEE ELECTRIC TOOL CORP. MILWAUKEE ELECTRIC TOOL CORP. MILWAUKEE ELECTRIC TOOL CORP. Hole Saw Round and Hex Shank Arbor Pilot Drill

For general cutting in wood and metal. • Fits Milwaukee Arbors 49-56-7010 and 49- Hole Saw Arbor 3/8 in. Shank. This 56-7150 Milwaukee Hole Saw Arbor has a 3/8 inch hex shank for greater gripping capability in the • 1/4 in. diameter chuck. It can be used in 3/8 inch capacity • High speed steel drills and larger. The arbor has a 1/2-20 thread and can be used on hole saws from 9/ • One per package 16 inch through 1-3/16 inch. It can be used with 49-56-8010 pilot bit which is supplied with this Arbor for use on wood and metal. One arbor and pilot per package. Features: Mfg. No. PG No. 49-56-8010 HOLE-M8010 Provide an economical means of extending • 3/8 in. hex shank the useful range of portable drills, drill presses • 1/2 in. - 20 thread MILWAUKEE ELECTRIC TOOL CORP. and lathes. Bi-Metal 6 TPI (with cobalt) High production tools designed for cutting all • Standard pilot 49-56-8010 Hole Saw Kit machinable materials, including steel, • For Hole Saws 9/16 in. to 1-3/16 in. diame- 10 Piece aluminum, copper, brass, sheet metal, ter stainless steel, wood or plastics

Mfg. No. PG No. Hole Diameter Depth of 49-56-7010 HOLE-M7010 Mfg. No. Size (in.) Cut (in.) PG No. MILWAUKEE ELECTRIC TOOL CORP. 49-56- ⁵⁄₈ 1¹⁄₄ HOLE- 0012 M0620 Hole Saw Arbor 49-56- ³⁄₄ 1⁷⁄₁₆ HOLE- 0023 M0750 49-56- ⁷⁄₈ 1⁷⁄₁₆ HOLE- 0032 M0870 49-56- 11⁷⁄₁₆ HOLE- 0043 M1000 49-56- 1¹⁄₈ 1⁷⁄₁₆ HOLE- 0052 M1120 For general construction, plumbing, electrical Milwaukee® Ice Hardened™ products utilize 49-56- 1¹⁄₄ 1⁷⁄₁₆ HOLE- maintenance work a proprietary cryogenic hardening process that improves upon traditional heat treat 0062 M1250 • Heavy duty thick back design ³⁄₈ ⁷⁄₁₆ processes. Unlike surface coatings that wear 49-56- 1 1 HOLE- away, cryogenics harden to the core by 0072 M1370 • Faster more aggressive cutting plus heat resistant cobalt minimizing soft metal (austenite) and creating 49-56- 1¹⁄₂ 1¹⁄₂ HOLE- more hard metal (martensite). The result is a 0082 M1500 • Less vibration for smoother cuts product that is more consistently hard 49-56- 1³⁄₄ 1¹⁄₂ HOLE- • Shatter resistant throughout, resulting in life up to 50% longer 0102 M1750 than the competition. ¹⁄₂ • High alloy steel body construction for 49-56- 21HOLE- longer life 0117 M2000 Ice Hardened™ for up to 50% longer life 49-56- 2¹⁄₈ 1¹⁄₂ HOLE- • High speed steel teeth electron beam • 0127 M2120 welded to a steel body than the competition 49-56- 2¹⁄₄ 1¹⁄₂ HOLE- • Pipe Tap: 3 1/2 in. • Optimized tooth form for up to 2X faster 0132 M2250 cutting • Size: 1-1/4 - 6 in. 49-56- 2¹⁄₂ 1¹⁄₂ HOLE- • Functional slots for faster plug removal 0147 M2500 • Room for additional hole saw and arbor ³⁄₄ ¹⁄₂ 49-56- 2 1 HOLE- storage 0163 M2750 Mfg. No. PG No. 49-56- 31¹⁄₂ HOLE- 49-56-7150 HOLE-M7150 0173 M3000 COMES WITH: • Six (6) hole saws: 7/8", 1-1/8", 1-3/8", 1-3/ 4", 2", 2-1/2" • Two (2) arbors: 49-56-7010, 49-56-9100 • Two (2) drill bits: 49-56-8010 • One (1) adapter: 49-56-6560 • One (1) spacer: 49-67-0120

www.pearlgreen.com 278 Pearlgreen Corporation Tools, Cutting The Industrial Supply Group

• Space for additional hole saws COOPER TOOLS IRWIN INDUSTRIAL TOOLS Compound Action Snips Tinner Snips Wiss® Prosnip™ Mfg. No. PG No. 49-22-4095 HOLE-SET10

MILWAUKEE ELECTRIC TOOL CORP. Hole Saw Kit 15 Piece • Non-slip serrated jaws of Wiss® Metalmas- ter® snips are made of extra tough, wear- resistant molybdenum steel to provide extra service demanded by the compound lever action • Withstands severe strain of cutting heavy stock and tight curves • Handles are formed of high strength steel • Handles have a margin of strength far above the limit of hand power that can be exerted • Flat Blades: Designed for wide curves and straight cuts • Self-opening action for fast, effortless feed • Durable Spring Washer: Greater consis- • Convenient, protective safety latch tency is achieved by incorporating a small spring washer to hold the blades tightly • Handles color-coded for ease of identifica- against each other when cutting tion Milwaukee® Ice Hardened™ products utilize • Comfortable Plastisol™ Handles: Ensur- a proprietary cryogenic hardening process • Non-slip, textured grips for superior control, ing comfort and less fatigue during cutting that improves upon traditional heat treat safety and comfort processes. Unlike surface coatings that wear • Handles color-coded for ease of identifica- away, cryogenics harden to the core by tion Mfg. No. Size (mm) PG No. minimizing soft metal (austenite) and creating more hard metal (martensite). The result is a • Length: 9 3/4 in. 007 7 SNIP-07 product that is more consistently hard • Length of Cut: 1 3/8 010 10 SNIP-10 throughout, resulting in life up to 50% longer 012 12³⁄₄ SNIP-12 than the competition. • Recommended Max. Capacity Low Carbon Cold Rolled Steel: 18 gauge steel (0.049 in./1.22mm) AMES LAWN AND GARDEN • Ice Hardened™ for up to 50% longer life • Shelf Pack: 6 Grass Whip Cutter than the competition • Optimized tooth form for up to 2X faster cutting Mfg. Grip • Functional slots for faster plug removal No. Color Desc. PG No. • Matrix II bi-metal teeth for greater durability M3R Yellow Straight AVIATION M1R Red Left Cut AVIATION-L COMES WITH: M2R Green Right Cut AVIATION-R • Eleven (11) hole saws: 3/4", 7/8", 1", 1-1/8", 1-3/8", 1-1/2", 1-3/4", 2", 2-1/8", 2-1/4", 2-1/ 2" • Two (2) arbors: 49-56-7010, 49-56-9100 • Two (2) drill bits: 49-56-8010 • One (1) adapter: 49-56-6560 • One (1) spacer: 49-67-0120 Grass whip cutters have double-edge serrated blades that cut both ways. • Space for additional hole saws Strong seal-coated northern ash handle for strength and durability. Packaging: Carton, Specifications: 9 1/4 x 1 1/ Mfg. No. PG No. 2 in., Cube: 1.0, Pk./Wt.: 6/8.4 lbs., Unit Pk./ 49-22-4175 HOLE-SET15 Unit Pk. Lbs.: 240 PP/336.0, Description: Sharp, serrated double-edge blade. 38 in. overall.

Mfg. No. PG No. 1942600 WHIP

www.pearlgreen.comwww.pearlgreen.com Tools, Cutting 914-636-0505 Phone 279 914-636-8951 Fax

RIDGE TOOL COMPANY CHANNELLOCK • Textured handles provide a firm, comfort- Long Handle Hedge Shears Wire Stripper/Cutter able grip. • Wire looping and bending holes.

Mfg. No. PG No. 11045 K-11045

Strips wire with no damage to conductor. Green Thumb, Basic Hedge Shear, Tubular KLEIN TOOLS Crimps both insulated and non insulated wire. Steel Handles, 10-1/2" Wavy Edge Blades, Blue® comfort grips, 8 in. size. Adjustable Wire Stripper TPR Grip, 3 Year Warranty.

Mfg. No. PG No. Mfg. No. PG No. 908 908 127913 HEDGE KLEIN TOOLS BOND MANUFACTURING Bypass Lopping Shears Wire Crimper Long Handle

8-1/4 in. Long Nose All Purpose Cutter/ Crimper, Cuts & Strips Wire, Crimps Insulated & Non-Insulated Terminals Including 7-8mm Ignition, Cuts 6 Popular Size Bolts, Narrow Solid and stranded wire Surrated Jaws To Pull, Bend & Loop Wire, • Simply dial desired wire size for fast, easy Carded, Made In USA. stripping • Adjustable tool makes short work for cut- ting and stripping operations Mfg. No. PG No. • Finely honed nose cutter easily gets into 1010 K-1010 tight areas Wire gauge dial sets stripping dies to KLEIN TOOLS • proper size, helps prevent nicked wire Green Thumb, 27", Bypass Lopper, 1-3/4" Wire Strippers/Cutters Cutting Capacity, Lightweight Oval Steel • Black oxide finish with plastic dipped han- Handles, Heat Treated Blades, 5 Year dles Warranty. • Spring-loaded design - tool opens automat- ically after each action • Overall Length: 5 1/20 in. Mfg. No. PG No. • Strips and Cuts: Adjusts from 12 - 24 AWG 127954 LOPPER (2.5 - 0.25 sq. mm), Handle Color: Yellow

BOND MANUFACTURING Bypass Pruning Shears Mfg. No. PG No. 74007 K-74007

• Compact, lightweight wire-stripping and cutting tool. • Narrow nose fits into tight places. • Hardened steel with precision ground strip- ping holes. Green Thumb, 8" Bypass Pruner, 1/2" Cutting Capacity, Non-Stick Powder Coated Steel • Do not use for cutting steel wire or bolts. Blade, Blade Hardness 46+/-2, Comfort • Spring-loaded action for self-opening. Molded Polyethylene Ergonomic Handle. • Precision-ground stripping holes for easy removal of insulation. • Easy-to-read wire gauge markings on both Mfg. No. PG No. sides for stripping in either direction. 127855 PRUNER • Black-oxide finish resists corrosion. • Color-coded handles: red indicates stranded wire, yellow indicates solid wire.

www.pearlgreen.com