Shaik Jeelani, Ph.D., P.E. Vice President, Research and Sponsored Programs Dean of the Graduate School Interium Department Head of Materials Science and Engineering

TUSKEGEE UNIVERSITY Ph.: (334) 727-8970 Fax: (334)-724-4224 [email protected]

Education • Ph. D 1974, North Carolina State University, Raleigh, North Carolina • Major: Machine Design, Stress Analysis, Metal Machining • Minor: Mathematics, Engineering Mechanics

Experience (Academic) • Professor of Mechanical Engineering, Tuskegee University, 1980 – Present • Associate Professor of Mechanical Engineering, Tuskegee University, 1978 –1980 • Assistant Professor of Mechanical Engineering, Tuskegee University, 1974 –1978

Experience (Administrative/Managerial) • Vice President, Research and Sponsored Programs, Tuskegee University, 1996-Present • Dean, Graduate School, 2015 – Present • Founding Head, Department of Materials Science and Engineering, 1998-2015 Director, Ph.D. Program in Materials Science and Engineering, 1998-2012 • Director, Center for Advanced Materials, Tuskegee University, 1977 - Present • Interim Dean, School of Engineering and Architecture, Tuskegee University, 1992- 1994 • Director, Computer Aided Design Laboratory (CAD), Tuskegee University, 1984-1996 • Associate Dean of Engineering and Architecture, Tuskegee University, 1981 – 1996 • Assistant Dean, of Engineering and Architecture, Tuskegee University, 1980 – 1981 • Interim Head, Mechanical Engineering Department, Tuskegee University, June 1, 1987 - August 31, 1987, June 1, 1982 – July 30, 1983, April 1, 1979 – June 1, 1980, June 1, • 1977 – May 31, 1978

Curriculum and Infrastructure Development Dr. Jeelani played a leading role in the development of various curriculums and infrastructure in the School of Engineering and Architecture. He spearheaded the Infrastructure and curriculum development in the School of Engineering and Architecture through a $2.50 million grant from the Army Research Office. This effort resulted in the university’s obtaining full (six years) ABET accreditation for all its Engineering programs. He also wrote the proposal for funding of the first Endowed Chair in Materials Science and Engineering at Tuskegee University and spearheaded the development of the curriculum, recruitment of students and establishment of Tuskegee University’s first Ph.D. program in Materials Science and Engineering.

Division of Research and Sponsored Programs 1

Dr. Jeelani is serving as the first Vice President for Research and Sponsored Programs (1996-Present) at Tuskegee University. The responsibilities include developing aggressive strategies and plans to increase funding for research and other sponsored programs and supervising three departments: Sponsored Programs, International Programs and Grantsmanship and Compliance. As a result of streamlining the Grants and Contracts process through development of various Sponsored Programs and Compliance Guides and publication of Tuskegee’s Research Capability, Funding for Research and Sponsored Programs at Tuskegee was raised from $23.6 million in 1996 to $48 Million in 2004.

Teaching Experience

Engineering Graphics, Introduction to Engineering, Statics, Dynamics, Applied Mechanics, Materials Science, Strength and Materials, Thermodynamics, Fluid Mechanics, Theory of Machines, Manufacturing Processes, Machine Design, Advanced Machine Design, Stress Consideration in Design, Experimental Stress Analysis.

Research Interests

Processing (hand layup, vacuum bag, autoclave, compression molding), Process Sensing, low-cost manufacturing using RTM, VARIM processes, static and dynamic (low- velocity, high strain rate, ballistic impact) of Fiber Reinforced Composites, Sandwich Composites, Fatigue and Fracture, Microstructural characterization (SEM, Optical Microscopy, Thermo-gravimetric Analysis), Structural Analysis, Non Destructive Evaluation.

Funded Grants

1. “Surface Integrity in Machining 18% Nickel Maraging Steel”, Grant No SER77-04201 from National Science Foundation ($20,000, 6/1/77 - 12/31/78). 2. “Evaporation Behavior of Super Alloy”, NASA, Lewis Research Center, ($40,000 8/1/78 – 8/31/78), with Dr. R.P. Ramirez. 3. “A study of Cumulative Fatigue Damage”, U.S. Navy, Naval Air Systems Command, ($30,000 11/28/77-9/2/78) with Dr. B.Z. Jarkowski. 4. “Evaporation Behavior of Super Alloys”, NASA, Lewis Research Center, ($25,000 6/1/78-12/31/79), with Dr. R.P. Ramirez. 5. “A Study of Cumulative Fatigue Damage”, U.S. Navy Air Systems Command ($41,175, 2/1/79-4/30/80). 6. “A Study of Cumulative Fatigue Damage”, U.S. Navy Air Systems Command ($61,891, 5/15/80-8/14/81). 7. “Support for Pre-College and Scholarship Programs in the School of Engineering and Architecture”, DoD, DoE, NASA and Industry, ($3.2 million, 1981-1996). 8. “Investigation of Cumulative Fatigue Damage for Selected Materials”, U.S. Navy, Navel Air Systems Command, ($42,635 5/15/82-8/31/83). 9. “Characterization of High Cycle Fatigue Behavior of Selected Materials”, With Dr. R. Natarajan, NASA-Marshall Space Flight Center, $108,544, 8/15/83-812/84). 10. “Characterization of Polymer Adhesives for Composites”, with Drs. Dillon and Ludwick, NASA - Lewis Research Center, ($99,593, 2/1/884-1/31/85). 2

11. “Effect of Cutting Speed and Tool Rake angle on the Fatigue Life of AISI 4130 Steel”, NASA-Marshall Space Flight Center, ($15,000, 6/1/84-5/31/85). 12. “Characterization of High Cycle Fatigue Behavior of Selected Materials”, NASA- Marshall Space Flight Center, ($122,871, 12/15/84-12/31/86). 13. “Effect of Electric Discharge Machining on the Fatigue Life of Inconel 718”, NASA-Marshall Space Flight Center, ($18,000, 6/1/85-5/31/86). 14. “Characterization of Fiber Composites”, NASA-Marshall Space Flight Center, ($18,000, 9/23/85-9/22/86). 15. “Characterization of Polymer Adhesives for Composites”, with Dr. Ludwick, NASA- Langley Research Center ($121,891, 4/1/85-12/31/86). 16. “Measurement of Residual Stress Distribution in Machining AISI 4130 Steel”, NASA- Marshall Space Flight Center, ( $20,000 9/23/85-9/22/86) 17. “Manufacture and Characterization of Silicon Carbide/Silicon Carbide Composites”, U. S. Navy, Office of Naval Research, URI program, ($2.25 Million, 1986-1991). 18. “Aviation Pavement Study for FAA”, Pailen-Johnson Associates, ($13,251, 2/1/- 9/31/1986). 19. “Effect of Electric Discharge Machining on the Fatigue Life of Inconel 718”, NASA-Marshall Space Flight Center, ( $18,000, 6/1/86-5/31/87). 20. “Effect of Grinding on the Fatigue Life of Ti 6A1-4V Alloy”, NASA-Marshall Space Flight Center, ($124,871, 12/4/86-12/3/87). 21. “Characterization of Fiber Composites”, NASA-Marshall Space Flight Center, ($ 20,000, 9/18/86-8/19/87). 22. “Structure and Properties of FM73 and Related Epoxy Adhesives”, NASA- Langley Research Center, with Dr. Al Ludwick ($123,385, 3/23/87-2/22/88). 23. “Environmental Effects on the Mechanical Properties of Composite Materials”, NASA-Marshall Space Flight Center, ($18,000, 6/1/87-530/88). 24. Determination of Residual Stress Distribution in Machining 2024-T351 Aluminum Alloy”, NASA-Marshall Space Flight Center, ($20,000, 6/1/87-5/31/88). 25. “An Evaluation of the Interfacial Bond Properties between Carbon Phenolic and Glass Phenolic Composite Materials” NASA-Marshall Space Flight Center, ($18,000, 6/1988-5/1988). 26. “Manufacture and Characterization of SiC/SiC Composites, U.S. Navy, Office of Naval Research, with Drs. Ludwick, Adeyemi and Yang ($2.25 million, 9/86- 9/91). 27. "Development of Capability for Characterization of Ceramic/Ceramic Composites”, U.S. Air Force, Office of Scientific Research, ($250,000, 1/89- 12/90). 28. “An Investigation of the Effects of Environment and Combined Compression- Shear on the Response of Carbon/PEEK Thermoplastic Composites”, NASA- Marshall Space Flight Center, ($256,000, 9/1/98-9/8/1992). 29. “Fractographic Analysis of Advanced Organic Matrix Composites”, U. S. Navy, Naval Air Development Center, ( $25,000, 10/30/89-/1992) 30. “Characterization of High Cycle Fatigue Behavior of Selected Materials”, NASA- Marshall Space Flight Center, ($120,000, 5/1990-4/30/91). 31. Mechanical Property Testing of Resin Transfer Molded Composites”, McDonnel Douglas Corp. ($15,000, 10/92-12/92), Co-PI with Dr. Hassan Mahfuz. 32. “Fatigue Damage in Composite Materials”, United States Army, Strategic Defense Command, ($200,000, 8/90-8/93). 33. “Micro-structural Study of the Thermo-mechanically Fatigued Titanium Aluminide”, 3

U. S. Navy, Naval Warfare Center (NAWC), ($10,000, 9/92-3/93). 34. “Mechanical Property Characterization of Refractory Composites”, National Aerospace Plane (NASP) Joint Program Office”, ($810,352, 9/90-9/95). 35. “High Temperature Fatigue of SiCf/Si3N4”, National Science Foundation, ($310,000, 9/92-9/95). 36. “Effects of Stress Ratio on Fatigue Damage in Composite Materials”, U. S. Army, Strategic Defense Command, ($200,000, 8/90-8/93). 37. “Reverse Fatigue of RTM Composites” 3M Corporation ($45,000, 4/92-4/95). Co-PI with Dr. Hassan Mahfuz. 38. “Infrastructure Support For Engineering at Tuskegee University”, Department of Defense, Army Research Office, ( $ 2.25 million, 1993-1998) 39. “Instrumentation of Fatigue and Compression Characterization Advanced Composites”, U. S. Navy, Office of Naval Research (ONR), ($350,000, 10/93-10/95). 40. “Advanced Polymeric Composites Manufacturing”, Martin Merietta Laboratories, ($20,000, 2/1/94-2/1/95), Co-PI with Dr. Hassan Mahfuz. 41. “Intelligent Processing of Resin Transfer Molded Composites”, Defense Advanced Research Project Agency (DARPA), ($726,100, 2/95-2/96). 42. “Advanced Polymeric Composites Manufacturing and Damage Tolerance Studies”, Lockheed Martin Manned Space Systems, New Orleans, LA ($110,000, 2/94-12-98), Co-PI with Dr. Hassan Mahfuz. 43. “Intelligent Resin Transfer Molding for Integral Armor Applications”, Army Research Office (ARO), ($9,400,000, 9/95-9/2000). 44. “Advanced Composites for Sea Structures”, Office of Naval Research, ($380,000, 9/95- 10/98). 45. Smart Materials for Transport Control”, National Science Foundation, Alabama EPSCoR, ($300,000, 9/95-9/98). 46. “Development and Analysis of Composite Isogrid Structures”, NASA- Marshall Space Flight Center, ($100,000, 5/95-5/97) Co-PI with Dr. Hassan Mahfuz. 47. "Advanced Integrated Structural Optimization," McDonnell Douglas Aerospace, St. Louis, Missouri, ($50, 000, 1/95-12/95), Co-PI with Dr. Hassan Mahfuz. 48. "Damage Tolerance of RTM Composite Sandwich Constructions,” Wright Laboratory (WL), Wright Patterson Air Force Base, ($300,000, 9/95-9/98), Co-Pi with Dr. Uday Vaidya. 49. "Innovative Manufacturing of High Performance Materials," National Science Foundation, Center for Research Excellence in Science and Technology (CREST), ($4.5 million, 9/97-9/02). 50. "Instrumentation for the Investigation of Structural Integrity of Sandwich Structures," U. S. Navy, Office of Naval Research (ONR), ($92,000, 6/00 - 12/00) 51. “Resin Infusion of Advanced Aerospace Composites”, Boeing Company, ($250,000, 9/96-9/01), Co-PI with Dr. Hassan Mahfuz. 52. “Alabama EPSCoR Infrastructure Development”, National Science Foundation, Alabama EPSCoR, ($150,000, 1998-2001). 53. “Innovative Manufacturing of Advanced Composites for Automotive Applications”, General Motors Corporation, ($200,000, 3/98-3/02). 54. Sandwich Construction for Sea Structures” U. S. Navy, Office of Naval Research, ($590,000, 1/99-1/01), Co-PI with Dr. Hassan Mahfuz. 4

55. Survivability of Affordable Aircraft Composite Structures, Air Force Laboratory, Wright Patterson Air Force Base, ($ 450,000, 1999-2003), Co-PI with Dr. Mahesh Hosur. 56. “Dynamic Characterization of Graphite/Epoxy Composite Laminates under Inplane compression, Single and Double Lap Shear Loading at Subzero, Room and Elevated Temperatures”, U.S. Army, Cold Regions Research Laboratory, ($175,000, 2001-2003) Co-PI with Dr. Mahesh Hosur 57. “A Partnership for Innovations in Nano Composites Technology,” National Science Foundation, ($600,000, 2/1/01 - 1/31/03) Co-PI with Dr. Hassan Mahfuz. 58. “Innovative Materials and Processes for Next Generation Weapons Systems, U.S. Army Research Office, ($900,000, 2001-2004), Co-PI with Dr. Derrick Dean. 59. “Nanophased Composites for Marine Structures”, U. S. Navy, Office of Naval Research, ($994,000, 2/02-7/04), Co-PI with Dr. Hassan Mahfuz. 60. “Alabama Internet II Middleware Initiative”, National Science Foundation, Alabama EPSCoR, ($275,010, 2/1/01-1/31/04). 61. “Acquisition of High Speed Imaging System for Dynamic Characterization of Advanced Materials”, U. S. Navy, Office of Naval Research, ($200,000. 9/1/01- 8/31/02). 62. “Support for the Ph.D. Program in Materials Science and Engineering at Tuskegee University”, David and Lucile Packard Foundation, ($ 244,000, 2001-2002). 63. “Synthesis, Manufacturing and Characterization of Structural Nanocomposites” Center for Research Excellence in Science and Technology (CREST) Program, National Science Foundation, ($4.5million, 9/1/03-8/31/08). 64. “Integrative Graduate Education and Research Training in Nanomaterials Science and Engineering”, Integrative Graduate Education and Research Training (IGERT) Program, National Science Foundation, ($3.32 million, 10/01/03-9/30/08). 65. “Studies of Structural Nanocomposites using Transmission Electron Microscopy”, Research Infrastructure in Science and Engineering (RISE) Program, National Science Foundation, ($1.0 million, 02/10/04-01/31/06). 66. “Center of Excellence for Composites and Advanced Materials” Air Transportation Center of Excellence for Advanced Materials, Federal Aviation Administration, ($225,000, 06/01/04-05/30/07). 67. “Development of Flexible Extremities utilizing Shear Thickening Fluid/fabric Composites”, Center of Excellence for Battlefield Capability Enhancement (BCE), Army Research Office, ($2.23 million, 11/01/04-09/30/09). 68. “Alabama Center for Nanocomposite Materials” Alabama Experimental Program for Stimulating Competitive Research (EPSCoR), National Science Foundation, ($1.8 million, 2005-2008), Co-PI with Dr. Mahesh Hosur. 69. “Effects of Surface Modifications on the Interfacial Properties of Structural Nanocomposites,” National Science Foundation (06/01/05-05/31/06), $100,000 Co- PI with Dr. Mahesh Hosur. 70. “Characterization of Nanocomposites and Composite Laminates,” Clarkson Aerospace Inc., (8/1/2005-1/31/2010), $225,000. 71. “MRI: Acquisition of Ultrasonic C-Scan System for Research and Educational Training in Structural Nanocomposites,” National Science Foundation (09/01/05- 08/31/08), $260,368 Co-PI with Dr. Mahesh V. Hosur.

5

72. PREM: A Research and Educational Partnership in Nanomaterials between Tuskegee University and Cornell University, (9/01/2006-08/31/2012), $2,550,000. 73. Enhancement of Research Infrastructure in the Materials Science and Engineering Program at Tuskegee University, National Science Foundation, (10/1/2006- 9/30/2008), $1,000,000. 74. “MRI: Acquisition of a Material Testing System for Research and Educational Training in Static and Dynamic Characterization of Advanced Structural Nanocomposites,” National Science Foundation (09/01/07-08/31/10), $394,550 Co- PI with Dr. Mahesh V. Hosur. 75. “Investigations on the Mechanical, Multifunctional and Environmental Behavior of Fiber Reinforced Polymer Nanocomposites for Marine Applications,” Office of Naval Research (7/7/08-05/31/12), $500,000 Co-PI with Dr. Mahesh V. Hosur. 76. “Alabama Center for Nanocomposite Materials,” NSF-EPSCoR (09/01/2008- 08/31/2010), $1,250,000 Co-PI with Dr. Mahesh Hosur. 77. “HBCU-RISE: Strengthening the Ph.D. Program in Materials Science and Engineering at Tuskegee University,” National Science Foundation, (1/1/2009- 12/31/2011), $1,000,000. 78. “Roadside Explosive Hazard Indicator and Deterrent System (REHIDS),” Concurrent Technologies Corporation, (4/10/10-9/30/10). $56,000, Co-PI with Dr. Mahesh V. Hosur. 79. “HBCU-RISE: Enhancement of Research and Educational Infrastructure in Nanobiomaterials Science and Engineering at Tuskegee University,” National Science Foundation, $1.0M, (04/01/2015-03/31/2018) Co-PI with Dr. Vijaya Rangari 80. “The NanoBio Science Partnership for Alabama Black Belt Region,” National Science Foundation, (09/01/2011-08/31/2019), $10 M. 81. “Implementation Project: Preparing Interdisciplinary Minority Material Scientists and Engineers of the Future,” National Science Foundation, $1,779,388, (7/1/2017- 6/30/2022). 82. “Targeted Infusion Project: Integrative Makers Course and Laboratory for STEM Undergraduates,” National Scienc Foundation, $300,000, (07/01/18-06/30/2021), Co- PI with Dr. Shaik Zainuddin. 83. REU SITE: Tuskegee University Research Experience for Undergraduates in Nano- Bio Materials Science and Engineering, $377,994.00, (04/05/2017-03/31/2021), (Shaik Zainuddin (PI), Mahesh Hosur (Co-PI)), National Science Foundation. Co-PI with Dr. Shaik Zainuddin. 84. MRI: Acquisition of a Nanoindentation Equipment for Research and Education Training in Nanomechanical Characterization of NanoBio Materials,” National Science Foundation, $400,455, (09/01/2017-08/30/2020), Co-PI with Dr. Shaik Zainuddin.

Patents Granted:

(1) Filtration system and methods of using such system for improved water filtration, Vijaya Rangari, Vitus Apalangya, Bonifce Tiimob, Temesgen Samuel: Submittee, pending, US 10,583,417.

6

Book Chapters

1. Shaik Zainuddin, Mahesh Hosur, Ashok Kumar and Shaik Jeelani, “Effects of ultraviolet radiation and condensation on static and dynamic compressive behavior of nanophased glass/ epoxy composites,” book chapter in Fiber Reinforced Polymer (FRP) Composites for Infrastructure Applications, Editors: Ravi Jain, Luke Lee, Publisher: Springer, 2012, pp. 91-111. 2. S. Zainuddin, M. V. Hosur, Ashok Kumar, Jonathan Trovillion, S. Jeelani, “Durability Enhancement of Fiber Reinforced Composites Using Nanoclay,” book chapter in Advanced fibre-reinforced polymer (FRP) composites for structural applications, Edited by J Bai, University of Glamorgan, UK, ISBN-13: 978 0 85709 418 6, September 2013. 3. Mahesh Hosur, Farhan Chowdhury and Shaik Jeelani, “Effects of Fabrication Processes and Nanoclay Inclusion on Performance of Woven Carbon/Epoxy Composite Laminates,” Chapter 6 in Computational and Experimental Methods in Structures- Vol. 6: Woven Composites, Editor: Ferri M. H. Aliabadi, Imperial College Press, ISBN 978- 1-78326-617-3, 2015, pp. 179-214. 4. Shaik Zainuddin, M. V. Hosur, A. A. Mohammed, E. M. Smith and S. Jeelani, “Thermoset Resin Sandwich Structures,” in Lightweight Composite Structures for Transport: Design, Manufacturing, Analysis and Performance, Ed: James Njuguna, Woodhead Publishing Series in Composites Science and Engineering, 2016, ISBN: 978- 1-78242-325-6, pp. 165-187. 5. Harish M. Rao, Mahesh Hosur, Shaik Jeelani, “Stab characterization of STF and thermoplastic impregnated ballistic fabric composites,” Chapter 12 of Advanced Fibrous Composite Materials for Ballistic Protection, Editors: Xiaogang Chen and Gwen Jones, Woodhead Publishing, Cambridge, UK, ISBN: 978-1-78242-461-1, 2016, pp. 363-388.

Publications in Refereed Journal

1. “Bailey, J.A. and Jeelani, S. “Surface Integrity in Machining 18% Nickel Maraging Steel”, ASME Transactions, 1974, pages 74-185. 2. Bailey, J.A, and Jeelani, S. “Determination of Subsurface Plastic Strain in Machining, Using an Embossed Grid”, Wear, Vol. 36, No. 2, 1975, page 199- 206. 3. Bailey, J. A., Jeelani, S. and Baker, S. E. “Surface Integrity in Machining Quenched and Tempered AISI 4340 Steel”, ASME, Journal of Engineering for Industry. 98 (3) 1976-1979. 4. Jeelani, S. “Measurement of Cutting Temperature in Machining Using Infrared Photography”, Wear 68, 1981, pg. 191-202. 5. Bailey, J. A. and Jeelani, S. “State of Subsurface Region in Machining Solution Treated and Aged 18% Nickel Maraging Steel”, Wear 72, 1981, pg. 237-243. 6. Jeelani, S. and Reddy, P. A. “A Study of Cumulative Fatigue Damage in 2011-T3 Aluminum Alloy”, Journal of Materials Science and Engineering, 561 1982, pg. 237-243. 7. Jeelani, S. and Ramakrishnan, K. “Subsurface Plastic Deformation in Machining Annealed 18% Nickel Maraging Steel”, Wear, 85 1982, pg. 263-273. 8. Jeelani, S. and Ramakrishnan, K. “Determination of Subsurface Plastic Strain 7

Distribution in the Machining of Red Brass”, Wear, 85 1983, pg. 67-69. 9. Jeelani, S. and Ramakrishnan, K. “Determination of Subsurface Plastic Strain in the Machining of 6-2-4-2 Titanium Alloy”, Wear, 85 1983, pg. 121-130. 10. Jeelani, S. and Aslam, M. “A Study of Cumulative Fatigue Damage in 2024-T4 Aluminum Alloy”, Wear, 939, 1984, pg. 207-217. 11. Jeelani, S. and Musial, M. “Effect of Cutting Speed and Tool Rake Angle on the Fatigue Life of Aluminum Alloy 2024-T351”, International Journal of Fatigue. 6(3) 1984, pg. 169-172. 12. Aslam, M. and Jeelani, S. “Prediction of Cumulative Fatigue Damage”, Journal of Materials Science, 20 1985, pg. 3232-3244. 13. Jeelani, S. and Ramakrishnan, K. “Surface Damage in Machining Red Brass”, Journal of Material Science, 20 1985, pg. 3011-3017. 14. Jeelani, S. and Ramakrishnan, K. “Surface Damage in Machining 6A1-2Sn-4Zr- 2Mo. Titanium Alloy”, Journal of Materials Science, 20 1985, pg. 3425-3252. 15. Jeelani, S. and Musial, M. “Dependence of Fatigue Life on the Surface Integrity in the Machining of 2024-T351 Aluminum Alloy”, Part I, “Un-lubricated Conditions”. Journal of Material Science, 20(1) 1986, pg. 155-160. 16. Jeelani, S. and Musial, M. “A Study of Cumulative Fatigue Damage in AISI 4130 Steel”, Journal of Materials Science, 21(1) 1986, pg. 2109-2113. 17. Jeelani, S., Ghebremedhin, S. and Musial, M. “A Study of Cumulative Fatigue Damage in Titanium 6A1-4V Alloy”, International Journal of Fatigue, 8 No. 1, 1986, pg. 23-27. 18. Jeelani, S. and Bailey, J. A. “Residual Stress Distribution in Machining Annealed 18% Nickel Maraging Steel”, ASME Journal of Materials Science and Technology, Vol. 108 (1986) 93-98. 19. Jeelani, S., Biswas, S. and Natarajan, R. “Effect of Cutting Speed and Tool Rake Angle on Residual Stress Distribution in Machining 2024-T351 Aluminum Alloy”, “A Study of Cumulative Fatigue Damage in AISI 4130 Steel”, Journal of Materials Science, 21, 1986, pg. 2705-2710. 20. Jeelani, S., Natarajan, R. and Reddy, G. R. “A Sub-sized Fatigue Specimen”, International Journal of Fatigue 8, No. 3(1986). 21. Mazumdar, P. and Jeelani, S. “Fatigue Crack Propagation Rate Model Based on a Dislocation Mechanism”, Journal of Materials Science Letters, 5 (1986) 972- 974. 22. Mazumdar, P. and Jeelani, S. “Plastic Deformation – Its Role in Fatigue Crack Propagation”, Journal of Materials Science, 21, 1986, pg. 3611-3614. 23. Jeelani, S. and Collins, M. R. “Effect of Electric Discharge Machining on the Fatigue Life”, International Journal of Fatigue, 10 No. 2 (1988) pg. 121-125. 24. Jeelani, S. and Scott, M. A. “How Surface Damage Removal Affects Fatigue Life”, International Journal of Fatigue, 10 No. 4 (1988) pg. 257-260 25. Haque, A., Copeland, C. W., Zadoo, D. P. and Jeelani, S. “Hygrothermal Influence on Flexural Properties of Kevlar-Graphite/Epoxy Hybrid Composites”, Journal of Reinforced Plastics and Composites, Vol. 9, November 1990, pp. 602-613 26. Haque, A. Moorehead, L., Zadoo, D. P. and Jeelani, S. “Hygrothermal Influence on interlaminar Shear Strength of Kevlar-Graphite/Epoxy Hybrid Composites”, Journal of Materials Science, 25, 1990, pg. 4639-4643. 27. Haque, A., Mahmood, S., Walker, L. and Jeelani, S. “Moisture and Temperature Induced Degradation in Tensile Properties of Kevlar 49/Graphite-Epoxy Hybrid 8

Composites”, Journal of Reinforced Plastics and Composites, Vol. 10/No. 2, March 1991, pp. 132-145. 28. Jordan, K., Clinton, R. and Jeelani, S. “An Evaluation of the Interfacial Bond Properties between Carbon Phenolic and Glass Phenolic Composites”, Journal of Materials, 26 (1991), 6016-6022. 29. Rangaswamy, P Terutung, H. and Jeelani, S. “Effect of Grinding Conditions on the Fatigue Life of Titanium 5AL-2.5SN Alloy”, Journal of Materials Science, 26 No. 10 pp. 2701-2706, 1991. 30. Haque, A. and Jeelani, S. “Environmental Effects on the Compressive Properties: Thermosetting vs. Thermoplastic Composites”, Journal of Reinforced Plastics and Composites, Vol. 2, February 1992, pp. 146-157. 31. Huq, N., Haque, A. and Jeelani, S. “Fracture Toughness Measurements onSiC/Al203 Composite” Journal of Material Science, 27 (1992) pp. 5989-5993. 32. Mahfuz, H., Sue, D., Jeelani, S., Baker, D. M. and Johnson, S. “Non-Linear Response of 2-D Carbon-Carbon Composites by Layered Shell Elements”, Developments in Theoretical and Applied Mechanics in, Vol. 16, (1992) pp. III.I. 62-72. 33. Mahfuz, H., Ingram, C. I. and Jeelani, S. “Compressive Response of Thermoplastic Composites by Layered Shell Elements”, Computers in Engineering, Vol. 2, ASME, 1992, pp. 95-101. 34. Salekeen, S., Haque, A., Copes, J. S., Mahfuz, H. and Jeelani, S. “Effects of Reinforcement Geometry on the Mechanical Properties of SiC/Al203 Composites and Prediction of Flexural Properties by Energy Method”, Journal of Composites Engineering, Vol. 2, No. 4, pp. 239-247, 1992. 35. Mahfuz, H., Yu, T. and Jeelani, S. “High Cycle Fatigue Characterization of Titanium 5A1-2.5Sn Alloy”, Journal of Materials Science, 28 (1993) pp. 138-144. 36. Mahfuz, H., Das, P. S., Jeelani, S., Baker, D. M. and Johnson, S., “Failure Mechanisms in Mission Cycled Carbon/Carbon Composites under Flexural Load at Room and Elevated Temperatures”, Journal of Materials Science, 28 (1993) pp. 5880- 5886. 37. Mahfuz, H., Das, P. S., Jeelani, S., Baker, D. M. and Johnson, S., “Effect of Mission Cycling on the Fatigue Performance of SiC Coated Carbon-Carbon Composites”, International Journal of Fatigue, Vol. 15, No. 4 (1993) pp. 283-291. 38. Mahfuz, H., Das, P. S., Xue, D., Krishnagopalan, J. and Jeelani, S. “A Combined Experimental and Finite Element Study to Predict The Failure Mechanisms in SiC coated Carbon/Carbon Composites at Room and Elevated Temperatures Under Flexural Loading”, Journal of Reinforced Plastics and Composites, Vol. 12, No. 7, July 1993, pp. 825-842 39. Haque, A., Krishnagopalan, J. and Jeelani, S. “Fatigue Damage in Laminated Composites”, Journal of Reinforced Plastics and Composites, Vol. 12, No. 10 October 1993, pp. 1058-1069. 40. Mahfuz, H., Xue, D., Jeelani, S., Baker, D. M. and Johnson, S. “Response of SiC Coated Carbon-Carbon Composites at Room and Elevated Temperatures under Tensile Loading”, Composite Science and Technology, 50 (1994) 411-422. 41. Haque, A., Mahfuz, H., Ingram, C. and Jeelani, S. “Response of Thermoplastic and Thermosetting Composites Under Compressive Loading- An Experimental and Finite Element Study”, Composites Engineering, Vol. 4, No. 6, 1994, pp. 637-651. 42. Vaidya, U. K., Mahfuz, H. and Jeelani, S. “NDE of Structural and Functional 9

Carbon/Carbon Composites after First Carbonization”, Journal of Advanced Materials, Vol. 26, No. 2, pp. 41-47, 1995. 43. Mahfuz, H., Zadoo, D., Wilks, F., Muneeruzzaman, M. and Jeelani, S., “Fracture and Flexural Characterization of SiCw/SiC Composites at Room and Elevated Temperatures”, Journal of Materials Science, 1995, Vol. 30, pp. 2406-2411. 44. Mahfuz, H., Muneeruzzaman, M., Vaidya, U. K. and Jeelani, S. “Fatigue Damage and Effects of Stress Ratio on the Fatigue Life of Carbon-Carbon Composites”, Theoretical and Applied Fracture Mechanics, 24 (1995), 21-31. 45. Mahfuz, H., Saha, M., Haque, A., Vaidya, U. K. and Jeelani, S. "Fatigue Damage and Residual Strength of Resin Transfer Molded Composites under Reversed Cyclic Loading," Innovative Processing and Characterization of Composite Materials, ASME 1995, NCA-Vol. 20/AMD-Vol.21 1, pp. 77-88. 46. Mahfuz, H., Haque, A., Yu, D. and Jeelani, S. “Response of Resin Transfer (RTM) Composites under Reverse Cyclic Loading”, Transaction of the ASME, Journal of Engineering Materials and Technology, Vol. 118, pp. 49-57, 1996.. 47. Vaidya, U. K., Mahfuz, H. and Jeelani, S. “NDE of Sandwich and Hybrid Carbon- Carbon Composites", Journal of Reinforced Plastics and Composites, Vol. 15, October 1996, pp. 988- 1010. 48. Vaidya, U. K., Dadzie, P., Haque, A., Mahfuz, H. and Jeelani, S. "NDE and Characterization of Micro fibers Modified Textile Carbon/Phenolic and Carbon/Carbon Composites”, Journal of Reinforced Plastics and Composites, Vol. 16, No. 11, 1997, pp. 968- 1001. 49. Mahfuz, H., Muneeruzzaman, M., Vaidya, U. K. and Jeelani, S. "Response of SiCfSi3N4 Composites under Cyclic Loading - An Experimental and Statistical Analysis," Transaction of the ASME, Journal of Engineering Materials and Technology, Vol. 119, pp 186-193, April 1997. 50. Haque, A., Johnson, J., Vaidya, U. K. and Jeelani, S. “Fatigue Damage in S2- Glagg/Vinyl Ester Thick Composites”, NCA-Vol. 24, ASME, 1997, pp.247-257. 51. Gajiwala, H. M., Vaidya, U. K., Sodah, S. and Jeelani, S. “ Hybridized Resin Matrix Approach Applied for Development of Carbon/Carbon Composites: Part- I”, Carbon, Vol. 36, No. 7-8, pp. 903-912, 1998. 52. Mahfuz, H., Saha, M., Biggs, R. and Jeelani, S. "Damage Tolerance of Resin Infiltrated Composites under Low Velocity Impact - Experimental and Numerical Studies," Key Engineering Materials, Trans. Tech Publications, Switzerland, Vol. 141-143 (1998), pp. 209-234. 53. Mahfuz, H., Lokesh, B., Vaidya, U. K. and Jeelani, S. "Experimental and Finite Element Hybrid Stress Analysis of Thick Section S2-Glass Composites," Developments in Theoretical and Applied Mechanics, Vol. 9 (I 998), pp. 117-128. 54. Mahfuz, H., Mian, A. K. M., Vaidya, U. K., Brown, T. and Jeelani, S. "Finite Element Study of the Fiber-Matrix Interface Behavior of [0/90] Laminated Composites Under Tensile Loading," Journal of Materials Science, 33 (1998)2965-2973. 55. Vaidya, U. K., Kamath, M. V., Mahfuz, H. and Jeelani, S. "Low Velocity Impact Response of Resin Infusion molded foam Filled Honeycomb Sandwich Composites," Journal of Reinforced Plastics and Composites, Vol. 17, No. 9, 1998, pp. 819-849. 56. Haque, A., Rahman, M., Vaidya, U. K., Mahfuz, H. and Jeelani, S. "Tensile Behavior of Woven Ceramic Matrix Composites at Room and Elevated Temperature: An Experimental and Numerical Study," Key Engineering Materials, Vols. 164-165 10

(1999) pp. 341-344. 57. Mahfuz, H., Mamun, W., Haque, A., Vaidya, U. and Jeelani, S. "Stress Wave Propagation through Fiber and Matrix in a Cylindrical Composite Coupon”, Physics and Modern Topics in Mechan Topics in Mechanical and Electrical Engineering, (ISBN: 960-8052-10-6), World Scientific and Engineering Society Press, pp. 151- 158, 1999. 58. Hosur, M. V., Vaidya, U. K., Abraham, A., Jadhav, N. and Jeelani, S. “Static and High Strain Rate Compression Response of Thick Section Twill Weave S2- Glass/Vinyl Ester Composites Manufactured by Affordable Liquid Molding Processes”, Journal of Engineering Materials and Technology, Vol. 121, No. 4, October 1999, pp. 468-475 59. Motuku, M., Janowski, G. M., Vaidya, U. K., Mahfuz, H., and Jeelani, S. “Low Velocity Impact Characterization of Unreinforced Vinyl Ester 411-350 and 411- C50 Resin Systems," Polymer & Polymer Composites, Vol. 7, No. 6, 1999, pp. 383-407. 60. Vaidya, U. K., Kamath, M. V., Hosur, M. V., Mahfuz, H. and Jeelani, S. "Manufacturing and Low Velocity Impact Response of Sandwich Composites with Hollow and Foam Filled Z-Pin Reinforced Core," Journal of Composites Technology and Research, JCTRER, Vol. 21, No.2, April 1999, pp. 84-97. 61. Vaidya, U. K., Hosur, M. V., Earl, D. and Jeelani, S. “Impact Response of Integrated Hollow Core Sandwich Composite Panels”, Composites Part A: Applied science and Manufacturing Vol. 31 (8), 2000 pp. 761-772. 62. Mahfuz, H., Zhu, Y., Haque, A., Vaidya, U. K. and Jeelani, S. "Investigation of High Velocity Impact on Integral Armor Using Finite Element Method," International Journal of Impact Engineering, Vol. 24, No. 2 (2000), pp. 203-217. 63. Mahfuz, H., Mamun, W., Haque, A., Vaidya, U. K. and Jeelani, S. “An Innovative Technique for Measuring the High Strain Rate Response of Sandwich Composites," Composite Structures, 50 (2000) 279-285. 64. Mahfuz, H., Zaman, K., Hisham, M. Foy, C., Haque, A. and Jeelani, S. "Fatigue Life Prediction of Thick-Section S2-Glass/Vinyl-Ester Composites under Flexural Loading," Transaction of ASME, Journal of Engineering Materials and Technology, Vol. 122, October 2000, pp. 402-408. 65. Motuku, M., Janowski, G. M., Vaidya, U. K., Mahfuz, H. and Jeelani, S. "Damage Evolution in Low-Velocity Impacted Unreinforced Vinyl Ester 411-350 and 411-C50 Resin Systems," Polymer Composites, No. 6, Vol. 21, December 2000, pp.878-899. 66. Hosur, M. V., Alexander, J. Vaidya U. K. and Jeelani, S. "High Strain Rate Compression Response of Carbon/Epoxy Laminate Composites," Journal of Composite Structures, 52 (2001), 405-417. 67. Mahfuz, H., Mamun, W., Austin, L., Haque, A. and Jeelani, S. "New Formulations for Hopkinson Bar Technique to Extract a Response of the Constituent Material in Composite Specimens," Journal of Materials: Design and Applications, Vol. 215,(2001) pp. 15-27. 68. Hosur, M. V., Abraham, A., Jeelani, S. and Vaidya, U. K. "Studies on the Influence of Through-The-Thickness reinforcement on Low-Velocity and High Strain rate response of Woven S2-Glass/Vinyl Ester Composites," Journal of Composite Materials, Vol. 35, No. 12,(2001), 1111-1133. 69. Gama, B., Gillespie, J., Mahfuz, H., Bogetti, T., Fink, B. and Jeelani, S. "High Strain Rate Behavior of Plain-Weave S-2 Glass/Vinyl ester Composites," Journal of 11

Composite Materials, Vol. 35, No. 13 (2001), pp. 1201-1228. 70. Mahfuz, H., Mamun, W. and Jeelani, S. "High Strain Rate Response of Sandwich Composites; Effect of Core Density and Core-Skin Debond," Journal of Advanced Materials, Vol. 34, No. 1, January (2002), pp. 22-26. 71. Kanny, K., Mahfuz, H., Thomas, T. and Jeelani, S. "Dynamic Mechanical Analysis and Flexural Fatigue of PVC Foams," Composite Structures, 58 (2002), pp. 175-183. 72. Thomas, T., Mahfuz, H., Kanny, K. and Jeelani, S. "Dynamic Compression of Cellular Cores: Temperature and Strain Rate Effects," Composite Structures, 58 (2002), pp. 505-512. 73. Mahfuz, H., Mamun, W. and Jeelani, S. "High Strain Rate Response of Sandwich Composites; Effect of Core Density and Core-Skin Debond," Journal of Advanced Materials, Vol. 34, No. 1, January (2002), pp. 22-26. 74. Kanny K., Mahfuz, H., Thomas, T. and Jeelani, S. "Dynamic Mechanical Analysis and Flexural Fatigue of PVC Foams," Composite Structures, 58 (2002), pp. 175-183. 75. Thomas, T., Mahfuz, H., Kanny, K. and Jeelani, S. "Dynamic Compression of Cellular Cores: Temperature and Strain Rate Effects," Composite Structures, 58 (2002), pp. 505-512. 76. Mahfuz, H., Gama, B., Das, P., Jeelani, S., Gillispie, J. and Fink, B., "Response of S2-Glass/Vinyl Ester Composites under High Strain Rate Loading - An Experimental and Finite Element Study," Journal of Advanced Materials, Vol. 35, No. 4(2003), pp.36-43. 77. Kulkarni N., Mahfuz, H., Jeelani, S. and Carlsson, L. "Fatigue Crack Growth and Life Prediction in Foam Core Sandwich Composites under Flexural Loading," Composite Structures, 59 (2003), pp. 499-505. 78. Haque, A., Hossain M. K., “Effects of Moisture and Temperature on High Strain Rate Behavior of S2-Glass-Vinyl Ester Woven Composites,” Journal of Composite Materials, Vol. 37 (7), (2003), pp. 627-647. 79. Hosur, M. V., Alexander, J., Vaidya, U. K., Mayer, A. and Jeelani, S., "High Strain Rate Compression Response of Affordable Woven Carbon/Epoxy Composites" Journal of Reinforced Plastics and Composites, Vol. 22, No. 3, (2003), pp. 271-296. 80. Hosur, M. V., Islam, W., Jeelani, S., Vaidya, U. K., and Dutta, P. "Effect of Temperature and Moisture on the High Strain Rate Response of Graphite/Epoxy Composites," Journal of Engineering Materials and Technology, Vol. 125, (2003), pp.1-8. 81. Hosur, M. V., Myers, D., Vaidya, U. K. and Jeelani, S. "Studies on the Repair of Ballistic Impact Damage in S2-Glass/Epoxy Laminates," Composite Structures, 61, No. 4 (2003), pp. 281-290. 82. Hosur, M. V., Alexander, J., Vaidya, U. K., Mayer, A. and Jeelani, S. "Studies on Impact Damage Resistance of Affordable Stitched Woven Carbon/Epoxy Composite Laminates"' Journal of Reinforced Plastics and Composites, Vol. 22, No. 10 (2003), pp.927-952. 83. Hosur, M. V., Adya, M, Vaidya, U. K., Mayer, A. and Jeelani, S. "Effect of Stitching and Weave Architecture on the High Strain Rate Compression Response of Affordable Woven Carbon/Epoxy Laminates," Composite Structures, 59 (2003), pp. 507-523. 84. Hosur, M. V., Karim, M. R. and Jeelani, S. "Experimental Investigation on the Response of Stitched/Unstitched Woven S2-Glass/SC-15 Epoxy Composites under 12

Single and Repeated Low Velocity Impact Loading" Composite Structures, 61, No. 1-2 (2003), pp.89-102. 85. Hosur, M. V., Alexander, J., Vaidya, U. K., Mayer, A. and Jeelani, S. "Off- Axis High Strain Rate Characterization of Plain Weave Carbon/Epoxy Composites," Polymers and Polymer Composites, Vol. 11, No. 7 (2003), pp. 527-540. 86. Chakravarty, U., Mahfuz, H., Saha, M. and Jeelani, S.," Strain Rate Effects on Sandwich Core Materials: An Experimental and Analytical Investigation," Acta Materialia, 51 (2003) 1469-1479. 87. Mahfuz, H., Adnan, A., Vijaya Rangari, and Jeelani, S., "Carbon Nanoparticles/Whiskers Reinforced Composites and their Tensile Response," 48th International SAMPE Symposium, Long Beach CA, Vol. 48, May 11-15 (2003), pp. 2559-2571. 88. Hosur, M. V., Adya, M., Vaidya, U. K., Dutta, P. and Jeelani, S. “Experimental Studies on the High Strain Rate Compression Response of Woven Graphite/Epoxy Composites at Room and Elevated Temperatures,” Journal of Reinforced Plastics and Composites, Vol. 23, No. 5 (2004), pp. 491-514. 89. Hosur, M. V., Alexander, J., Vaidya, U.K., Mayer, A. and Jeelani, S. “Studies on the Off-Axis High Strain Rate Compression Loading of Satin Weave Carbon/Epoxy Composites," Composite Structures, Vol. 63 (2004), pp.75-85. 90. Hosur, M. V., Karim, R. M., and Jeelani, S. "On the Response of Stitched S2- Glass/Epoxy Composites to High Strain Rate Compression Loading," Polymer and Polymer Composites, Vol. 12, No. 3 (2004), pp.183-196. 91. Hosur, M. V., Vaidya, U. K., Ulven, C. and Jeelani, S. "Performance of Stitched/Unstitched Woven Carbon/Epoxy Composites Under High Velocity Impact Loading," Composite Structures, Vol. 64, No. 3-4, (2004), pp. 455-466. 92. Hosur, M. V., Islam, W., Vaidya, U. K., Dutta, P. and Jeelani, S. "Experimental Studies on the Dynamic Punch Shear Characterization of Satin Weave Graphite/Epoxy Composites," Materials Science Engineering A., 368, (2004), pp. 269-279. 93. Hosur, M. V., Abdullah, M. and Jeelani, S. "Manufacturing and Low Velocity Impact Characterization of Hollow-Core Sandwich Composites with Hybrid Face sheets," Composite Structures, Vol. 65, No.1 (2004), pp. 103-115. 94. Hosur, M. V., Karim, R. and Jeelani, S. "Studies on Stitched Woven S2- Glass/Epoxy Laminates under Low Velocity and Ballistic Impact Loading," Journal of Reinforced Plastics and Composites, Vol. 23, No. 12 (2004), pp. 1313- 1324. 95. Hosur, M. V., Abdullah, M. and Jeelani, S. "Studies on Low-Velocity Impact Response of Woven Hybrid Composites," Composite Structures, Vol. 67, No. 3 (2004), pp. 253-262. 96. Hosur, M. V., Abdullah, M. and Jeelani, S. "Manufacturing and Low Velocity Impact Characterization of Foam-Filled 3-D Integrated Core Sandwich Composites with Hybrid Face Sheets," Composite Structures, Vol. 69, No. 2 (2004), pp. 167-181. 97. Kanny, K., Mahfuz, H., Thomas, T. and Jeelani, S., "Fatigue of Cross-linked and Linear PVC Foams under Shear Loading," Journal of Reinforced Plastics and Composites, Vol. 23 No. 6 (2004), pp. 601-612. 98. Thomas, T., Mahfuz, H., Kanny, K. and Jeelani, S.," High Strain Rate Response of Cross-linked & Linear PVC Foams," Journal of Reinforced Plastics and Composites, Vol. 23, No. 7 (2004), pp. 739-749. 13

99. Kulkarni, N., Mahfuz, H. and Jeelani, S., “Fatigue Failure Mechanism and Crack Growth in Foam Core Sandwich Composites under Flexural Loading,” Journal of Reinforced Plastics and Composites, Volume 23, No. 1(2004), pp. 83-94. 100. Thomas, T., Mahfuz, H., Kanny, K., and Jeelani, S.," Dynamic Compression of Sandwich Composites at Sub-Ambient Temperatures," Journal of Composite Materials, Vol. 38, No. 8 (2004), pp. 641-654. 101. K., Mahfuz, H., Thomas, T., and Jeelani, S, "Static and Dynamic Characterization of Polymer Foams under Shear Loads, Journal of Composite Materials, Vol. 3, No. 8 (2004), pp. 629-640. 102. Mahfuz, H., Rangari, V., Islam, M., and Jeelani, S.," Fabrication, Synthesis and Mechanical Characterization of Nanoparticles Infused Polyurethane Foams," Composites Part A: Applied Science and Manufacturing, Vol. 35 No. 4 (2004), pp. 453-460. 103. Mahfuz, H., Islam, M., Rangari, V., Saha, M. and Jeelani, S., "Response of Sandwich Composites with Nanophased Cores under Flexural Loading," Composites Part B: 35 (2004) 543-550. 104. Mahfuz, H., Adnan, A., Rangari, V., and Jeelani, S, "Carbon Nanoparticles/Whiskers Reinforced Composites and their Tensile Response," Composites Part A: Applied Science and Manufacturing, Vol. 35 (2004) 519-527. 105. Mahfuz, H., Majumdar, P., Saha, M. and Jeelani, S., "Integral Manufacturing of Composite Skin-Stringer Assembly and their Stability Analyses," Applied Composite Materials, 11 (3): (2004)155-171. 106. Chisholm, N., Mahfuz, H., Rangari, V., Ashfaq, A. and Jeelani, S., “Fabrication and Mechanical Characterization of Carbon/Epoxy Nanocomposites,” Composite Structures 67 (2005) 115-124. 107. Saha, M., Joarder, C., Mahfuz, H., Jeelani, S., Srinivasgupta, D., Joseph, B., Thomas, M., and Christensen, S., “Manufacturing and Tensile Characteristics of Integral Sandwich Tee Joints,” Journal of Advanced Materials, 37(1) (2005), 53-60. 108. Mahfuz, H., Baseer, M.A., Rangari, V., Jeelani, S. “Fabrication, Characterization and Mechanical Properties of Nanophased Carbon Prepreg Laminates,” SAMPE Journal, 41(2) (2005), 40-48. 109. Saha, M., Mahfuz, H., Chakravarty, U., Uddin, M., Kabir, M., Jeelani, S., “Effect of Density, Microstructure, and Strain Rate on Compression Behavior of Polymeric Foams,” Materials Science and Engineering A, 406(1-2) (2005), 328- 336. 110. Mahfuz, H., Adnan, A., Rangari, V., and Jeelani, S, “Manufacturing and Characterization of Carbon Nanotube/Polyethylene Composites,” International Journal of Nanoscience (IJN), 4(1) (2005), 55-72. 111. Mahfuz, H., Islam, S., Saha, M., Carlsson, L., and Jeelani, S., “Buckling of Sandwich Composites; Effects of Core-Skin Debonding and Core Density," Applied Composite Materials, 2(2) (2005), 73-91. 112. Rodgers, R., Mahfuz, H., Rangari, V., Chisholm, N., and Jeelani, S., “Infusion of Nanoparticle into SC-15 Epoxy; an Investigation of Thermal and Mechanical Response," Macromolecular Materials & Engineering, 290(5) (2005), 423-429. 113. Hosur, M. V., Islam, W., Vaidya, U. K., Dutta, P. and Jeelani, S. “Dynamic Punch Shear Characterization of Plain Weave Graphite/Epoxy Composites at Room and Elevated Temperatures,” Composite Structures, 70(3) (2005), 295-307. 14

114. Saha, M., Joarder, C., Mahfuz, H., Jeelani, S., Srinivasgupta, D., Joseph, B., Thomas, M., and Christensen, S., “Manufacturing and Tensile Characteristics of Integral Sandwich Tee Joints,” Journal of Advanced Materials, 37(1) (2005), 53-60. 115. Mahfuz, H., Baseer, M.A., Rangari, V., Jeelani, S. “Fabrication, Characterization and Mechanical Properties of Nanophased Carbon Prepreg Laminates,” SAMPE Journal, 41(2) (2005), 40-48. 116. Saha, M., Mahfuz, H., Chakravarty, U., Uddin, M., Kabir, M., Jeelani, S., “Effect of Density, Microstructure, and Strain Rate on Compression Behavior of Polymeric Foams,” Materials Science and Engineering A, 406(1-2) (2005), 328- 336. 117. Mahfuz, H., Adnan, A., Rangari, V., and Jeelani, S, “Manufacturing and Characterization of Carbon Nanotube/Polyethylene Composites,” International Journal of Nanoscience (IJN), 4(1) (2005), 55-72. 118. Mahfuz, H., Islam, S., Saha, M., Carlsson, L., and Jeelani, S., “Buckling of Sandwich Composites; Effects of Core-Skin Debonding and Core Density," Applied Composite Materials, 2(2) (2005), 73-91. 119. Rodgers, Rene, Mahfuz, H., Rangari, V., Chisholm, N., and Jeelani, S., “Infusion of Nanoparticle into SC-15 Epoxy; an Investigation of Thermal and Mechanical Response," Macromolecular Materials & Engineering, 290(5) (2005), 423-429. 120. Hosur, M. V., Islam, W., Vaidya, U. K., Dutta, P. and Jeelani, S. “Dynamic Punch Shear Characterization of Plain Weave Graphite/Epoxy Composites at Room and Elevated Temperatures,” Composite Structures, 70(3) (2005), 295-307. 121. Hosur, M. V., Abdullah, M., and Jeelani, S. “Manufacturing and Low-Velocity Impact Characterization of Foam Filled 3-D Integrated Core Sandwich Composites with Hybrid Face Sheets,” Composite Structures, 69(2) (2005), 167-181. 122. Hosur, M. V., Islam, W., Vaidya, U. K., Dutta, P. and Jeelani, S. “Studies on the Low-Velocity Impact Response of Woven Hybrid Composites,” Composite Structures, 67(3) (2005), 253-262. 123. Zhou, Y., Mahfuz, H., and Jeelani, S., “Numerical Simulation for High Strain Rate Failure Process of Unidirectional SiCf/Al Composites,” International Journal of Damage Mechanics, 14(4) (2005), 321-341. 124. Farhana, P., Zhou, Y., Rangari, V., and Jeelani, S., “Testing and Evaluation on the Thermal and Mechanical properties of Carbon Nano Fiber reinforced SC-15 Epoxy,” Materials Science and Engineering A, 405(1-2) (2005), 246-253. 125. Zhou, Y., Rangari, V., Mahfuz, H., Jeelani, S., and P. K. Mallick, “Thermal and Mechanical behavior of Polypropylene, Talc-filled Polypropylene and Polypropylene Nanocomposites,” Materials Science and Engineering A, 402(1-2) (2005), 109-117. 126. Abdullah, M., and Jeelani, S. “Manufacturing and Low-Velocity Impact Characterization of Foam Filled 3-D Integrated Core Sandwich Composites with Hybrid Face Sheets,” Composite Structures, 69(2) (2005), 167-181. 127. Hosur, M. V., Islam, W., Vaidya, U. K., Dutta, P. and Jeelani, S. “Studies on the Low-Velocity Impact Response of Woven Hybrid Composites,” Composite Structures, 67(3) (2005), 253-262. 128. .Zhou, Y., Mahfuz, H., and Jeelani, S., “Numerical Simulation for High Strain Rate Failure Process of Unidirectional SiCf/Al Composites,” International Journal of Damage Mechanics, 14(4) (2005), 321-341. 129. Zhou, Y., Pervin, F., Biswas, M., Rangari, V., and Jeelani, S., "Fabrication and Characterization of Montmorillonite Clay-filled SC-15 Epoxy," Materials Letters, 15

60(7) (2006), 869-873. 130. Zhou, Y., Baseer, M., Mahfuz, H., and Jeelani, S., "Monte Carlo Simulation on Tensile Failure Process of Unidirectional Carbon Fiber Reinforced Nano-Phased Epoxy," Materials Science and Engineering A, 420(1-2) (2006), 63-71. 131. Zhou, Y., Pervin, P., Rangari, V., and Jeelani, S., Fabrication and evaluation of carbon nano fiber filled carbon/epoxy composite Materials Science and Engineering: A, 426(1-2) (2006), 221-228. 132. Hassan, M., Zhou, Y., Mahfuz, S., and Jeelani, S., "Effect of SiO2 nanoparticle on thermal and tensile behavior of nylon-6," Materials Science and Engineering: A, 429(1-2) (2006), 181-188. 133. Mahfuz, H., Adnan, A., Rangari, V., Hasan, M., Jeelani, S., Wright, W. J., and Deteresa, S. J., "Enhancement of Strength and Stiffness of Nylon 6 Filaments through Carbon Nanotubes Reinforcement," Applied Physics Letters, 88(2006), 083119. 134. Chowdhury, F.H., Hosur, M.V., Jeelani, S., "Studies on the Flexural and Thermomechanical Properties of Woven Carbon/Nanoclay-Epoxy Laminates," Materials Science and Engineering A, 421, 2006, 298-306. 135. Hosur, M.V., Waliul Islam, S.M., and Jeelani, S., "Dynamic Punch Shear Characterization of Twill Weave Graphite/Epoxy Composites," Polymers and Polymer Composites, Vol. 14, No. 2, 2006, pp. 135-143. 136. Rangari, V., Tarig A. Hassan, Yuanxin Zhou, Hassan Mahfuz1 and Shaik Jeelani, “Cloisite Clay Infused Phenolic Foam Nanocomposite,” Journal of Applied Polymer Science, 103, 308-314, 2007. 137. Mahfuz, Hassan; Hasan, Mohammad M.; Rangari, V., Jeelani, Shaik. “Reinforcement of nylon-6 filaments with SiO2 nanoparticles and comparison of Young's modulus with theoretical bounds,” Macromolecular Materials and Engineering, 292 (4), 437- 444, 2007. 138. Hassan Mahfuz, Shaik Zainuddin, Martin R. Parker, Tariq Al-Saadi, Rangari, V., Shaik Jeelani. “Enhancement of strength and stiffness of epoxy-based composites using nanoparticle infusion and high magnetic fields,” Materials Letters, 61, 2535– 2539, 2007. 139. Rangari, V., Hassan, T., Zhou, Y., Mahfuz, H., Jeelani, and Prorok, B., “Cloisite Clay- Infused Phenolic Foam Nanocomposites,” Journal of Applied Polymer Science, Vol. 103, 308-314 (2007). 140. Mahfuz, H., Hasan, M., Rangari, V., and Jeelani, S., “Reinforcement of Nylon 6 Filaments with SiO2 Nanoparticles and Comparison of Young’s Modulus with Theoretical Bounds,” Macromolecular Materials & Engineering 2007, 292, 437- 444. 141. Adnan, A., Sun, C.T., and Mahfuz, H., “A molecular Dynamics Simulation Study to Investigate the Effect of Filler Size on Elastic Properties of Polymer Nanocomposites,” Composites Science and Technology 67 (2007) 348-356. 142. M. V. Hosur, M. Abdullah, S. Jeelani, “Dynamic Compression Behavior of Integrated Core Sandwich Composites,” Materials Science and Engineering-A, Vol. 445-446, 2007, pp. 54-64. 143. M. V. Hosur, K. Jain, F. Chowdhury, S. Jeelani, M. R. Bhat, C. R. L. Murthy, “Low-Velocity Impact Response of Carbon/Epoxy Laminates Subjected to Cold- Dry and Cold-Moist Conditioning,” Composite Structures, Vol. 79, 2007, pp. 300- 311. 16

144. M. V. Hosur, F. Chowdhury, and S. Jeelani, “Processing, Impact Response and Damage Characterisation of Plain-Weave Carbon/Epoxy-Nanoclay Nanocomposites,” Polymer and Polymer Composites, Vol. 15, No. 6, 2007, pp.425- 435. 145. Yuanxin Zhou, Farhana Pervin, Lance Lewis and Shaik Jeelani, “Experimental study on the thermal and mechanical properties of multi-walled carbon nanotube- reinforced epoxy,” Materials Science and Engineering: A, Volume 452-453, 2007 pp. 657-664. 146. Yuanxin Zhou, Sajedur Rahman Akanda, Shaik Jeelani and Thomas E. Lacy, Nonlinear Constitutive Equation for Vapor-Grown Carbon Nanofiber-Reinforced SC- 15 Epoxy at Different Strain Rate, Materials Science and Engineering: A, 465, n 1-2, Sep 15, 2007, p 238-246. 147. M. V. Hosur, F. Chowdhury, and S. Jeelani, “Low-Velocity Impact Response and Ultrasonic NDE of Woven Carbon/Epoxy-Nanoclay Nanocomposites,” Journal of Composite Materials, Vol. 41, No. 18, 2007, pp. 2195-2212. 148. Yuanxin Zhou, Farhana Pervin, Shaik Jeelani, “Effect vapor grown carbon nanofiber on thermal and mechanical properties of epoxy,” Journal of Materials Science, v 42, n 17, August, 2007, p 7544-7553. 149. F. H. Chowdhury, M.V. Hosur, S. Jeelani, “Investigations on the Thermal and Flexural Properties of Plain Weave Carbon/Epoxy-Nanoclay Composites by Hand- Layup Technique,” Journal of Materials Science, Vol. 42, No. 8, April, 2007, pp. 2690-2700. 150. Hasan, Yuanxin Zhou and Shaik Jeelani, “Thermal and tensile properties of aligned carbon nanofiber reinforced polypropylene,” Materials Letters, Volume 61, Issue 4-5, February 2007, Pages 1134-1136. 151. Yuanming Xia, Ying Wang, Yuanxin Zhou and Shaik Jeelani, “Effect of strain rate on tensile behavior of carbon fiber reinforced aluminum laminates ,” Materials Letters, Volume 61, Issue 1, January 2007, Pages 213-215. 152. Yuanxin Zhou, Yuanming Xia, Ying Wang and Shaik Jeelani, “Experimental study on tensile behavior of carbon fiber and carbon fiber reinforced aluminum at different strain rate,” Applied Composite Materials, Volume 14, Number 1, January, 2007, pp. 17-31. 153. Rangari, V. T. A. Hassan, Yuanxin Zhou; Hassan Mahfuz, Shaik Jeelani; B. C. Prorok, “Cloisite clay-infused phenolic foam Nanocomposites,” Journal of Applied Polymer Science, v 103, n 1, Jan 5, 2007, p 308-314. 154. Theotokoglou, E.E., Hortis. D., Carlsson, L.A. and Mahfuz, H., “Numerical Study of Fractured Sandwich Composites under Flexural Loading,” Journal of Sandwich Structures and Materials 2008; 10; 75. 155. M. V. Hosur, A. A. Mohammed, S. Zainuddin, and S. Jeelani, “Impact Performance of Nanophased Foam Core Sandwich Composites,” Materials Science and Engineering, A Vol. 498, No. 1-2, 2008, pp. 100-109. 156. M. V. Hosur, A. A. Mohammed, and S. Jeelani, “Processing of Nanoclay Filled Sandwich Composites and their Response to Impact Loading,” Journal of Reinforced Plastic and Composites, Vol. 27, No 8, 2008, pp. 797-818. 157. Hosur M. V., Mayo Jr. J. B., Wetzel E., and Jeelani S., “Studies on the Fabrication and Stab Resistance Characterization of Novel Thermoplastic-Kevlar Composites,” Advanced Structural and Functional Materials for Protection, Solid State Phenomena Vol. 136, 2008, pp. 83-92. 17

158. Ingram J., Yuanxin Zhou, Jeelani S., Lacy T., and Horstmeyer M.F., “Effect of strain rate on tensile behavior of polypropylene and carbon nanofiber filled polypropylene,” Materials Science and Engineering: A, 489(2008) Pages 99-106. 159. Jones I. K., Yuanxin Zhou, Jeelani S., Mabry J.M., “Effect of polyhedral- oligomeric- sil-sesquioxanes on thermal and mechanical behavior of SC-15 epoxy,” Express Polymer Letters, (2)2008: 494-501. 160. Rangari, V., Tarig A. Hassan, Clifton Mayo and Shaik Jeelani, “Titanium carbide infused phenolic balsa foam nanocomposite,” International Journal of Nanoscience, 7, 235-243, 2008. 161. Rangari, V., Mohammed Yousuf, Shaik Jeelani, Merlyn X. Pulikkathara and Valery N. Khabashesku, “Alignment of carbon nanotubes and reinforcing effects in Nylon- 6 polymer composite fibers,” Nanotechnology, 19, 245703-245712, 2008. 162. Hassan Mahfuz, Mohammad Hasan, Vinod Dhanak, Graham Beamson, Justin Stewart, Rangari, V., and Shaik Jeelani, “Enhancing the properties of nylon 6 filaments with functionalized silica nanoparticles,” Nanotechnology, 19, 445702- 445706, 2008. 163. M. V. Hosur, A. A. Mohammed, S. Zainuddin and S. Jeelani, “Processing of Nanoclay Filled Sandwich Composites and their Response to Low-Velocity Impact Loading,” Composite Structures, Vol. 82, 2008, pp. 101-116. 164. Ayorinde, E., Gibson, R., Kulkarni, S., Deng, F., Mahfuz, H., Islam, S., Jeelani, S., “Reliable low-cost NDE of Composite Marine Sandwich Structures,” Composites: Part B, 39 (2008) 226-241. 165. Rangari, V., Mohammad, I, Jeelani Yuanxin Zhou and Shaik Jeelani, “Fabrication and characterization of MWCNT/thermoplastic microsphere nanocomposite foams,” International Journal of Nanoscience, 7, 161-169, 2008. 166. Yuanxin Zhou, Peixuan Wu, Zhongyang Cheng, Joranda Ingram and Shaik Jeelani, “Improvement in electrical, thermal and mechanical properties of epoxy by filling carbon,” Express Polymer Letter, 2008, 2(1), 40-48. 167. Rangari, V., Shaik, M, Mahfuz, H. and Jeelani, S., “Fabrication and Characterization of High Strength Nylon-6/Si3N4 Polymer Nanocomposites Fibers,” Materials Science & Engineering A, (2008) DOI:10.1016/j.msea.2008.09.014. 168. B. Bey, Yuanxin Zhou, Shaik Jeelani, Ashok Kumar and L.D. Stephenson, “Nonlinear constitutive equation for temperature degraded unidirectional carbon fiber reinforced epoxy,” Materials Letters, Volume 62, Issues 21-22, 15 August 2008, Pages 3659-3662. 169. Yuanxin Zhou, Farhana Pervin, Shaik Jeelani and P.K. Mallick, “Improvement in mechanical properties of carbon fabric-epoxy composite using carbon nanofibers,” Journal of Materials Processing Technology, Volume 198, Issues 1-3, 3 March 2008, pp. 445-453. 170. Yuanxin Zhou, Farhana Pervin, Lance Lewis and Shaik Jeelani, “Fabrication and characterization of carbon/epoxy composites mixed with multi-walled carbon nanotubes,” Materials Science and Engineering: A, Volume 475, Issues 1-2, 25 February 2008, pp. 157-165. 171. Yuanxin Zhou, M.I. Jeelani, and Shaik Jeelani, “Fabrication and characterization of carbon/epoxy composites mixed with multi-walled carbon nanotubes,” Materials Science and Engineering: A, Volume 475, Issues 1-2, 25 February 2008, pp. 157-165. 172. Seyhan Boyoglu, Komal Vig, Shreekumar Pillai, Rangari, V., Vida A. Dennis, 18

Praseetha Subbarayan, Shree R. Singh, “Enhanced Delivery and Expression of Nanoencapsulated DNA Vaccine Vector,” Nanomedicine: Nanotechnology, Biology and Medicine, Volume 5, Issue 4, December 2009, Pages 463-472. 173. Jessie Mayo, Eric Wetzel, Mahesh Hosur, Shaik Jeelani, “Stab and Puncture Characterization of Thermoplastic-Impregnated Aramid Fabrics,” International Journal of Impact Engineering, Volume 36, Issue 9, September 2009, Pages 1095- 1105. 174. Rangari, V., Tarig A Hassan, Quentin Mayo and Shaik Jeelani, “Size reduction of WO3 nanoparticles by ultrasound irradiation and its applications in structural nanocomposites,” Composite Science and Engineering, 69, 2009, 2293-2300. 175. Mahesh V. Hosur, Orion Gebremedin, Shaik Jeelani, “Processing and Performance Evaluation of Nanoclay Infused EPON 828,” Polymer & Polymer Composites, 17 (3), 2009, pp. 151-160. 176. Hassan Mahfuz, Shaik Zainuddin, Martin R. Parker, Tariq Al-Saadi, Rangari, V., Shaik Jeelani, “Reinforcement of SC-15 epoxy with CNT/CNF under high magnetic field: an investigation of mechanical and thermal response,” J Mater Sci, 44:1113– 1120, 2009. 177. Rangari, V., Mohammed Y. Shaik and Shaik Jeelani, “Fabrication and characterization of high strength Nylon-6/Si3N4 polymer nanocomposites fibers,” Materials Science and Engineering A, 500, 92-97, 2009. 178. S. Zainuddin, M. V. Hosur, Y. Zhou, A. Kumar, and S. Jeelani, “Durability studies of montmorillonite clay filled epoxy composites under different environmental conditions,” Materials Science and Engineering, 507, 2009, pp. 117–123. 179. Mahfuz, H., Clements, F., Rangari, V., Dhanak, V. and Beamson, G., “Enhanced Stab Resistance with Functionalized Silica Nanoparticles,” Journal of Applied Physics 105, 064307 (2009). 180. Mahesh V. Hosur, Md. Mazedul Islam, Shaik Jeelani, “Processing and performance of nanophased braided carbon/epoxy composites,” Materials Science and Engineering B doi:10.1016/j.mseb.2009.10.015, 2009. 181. Md. A. Bhuiyan, M. V. Hosur, S. Jeelani, “Low –Velocity Impact Response of Sandwich Composites with Nanophased Foam Core and Biaxial (±45°) Braided Face Sheets,” Composites Part B: Engineering, Volume 40, Issue 6, September 2009, Pages 561-571. 182. Mahfuz, H., Zainuddin, S., Parker, M.R., Al-Saadi, T., Rangari, V., and Jeelani, S., “Reinforcement of SC-15 Epoxy with CNT/CNF under High Magnetic Field – An Investigation of Mechanical and Thermal Response,” Journal of Materials Science, Volume 44, Number 4, January 2009, Pages 1113-1120. 183. S. Zainuddin, M. V. Hosur, A. Kumar, and S. Jeelani, “Durability Study of Neat/Nanophased GFRP Composites Subjected to Different Environmental Conditioning,” Materials Science and Engineering A, 527, 2010, pp. 3091-3099. 184. Yuanxin Zhou, Evert White, Mahesh Hosur, Shaik Jeelani, “Effect of particle size and weight fraction on the flexural strength and failure mode of TiO2 particles reinforced epoxy,” Materials Letters, 64, 2010, pp. 806-809. 185. Mahesh V. Hosur, Tamanna Rahman, Shaik Jeelani, “Mechanical and Thermal Properties of Amine Functionalized Multi-walled Carbon Nanotubes Epoxy Based Nanocomposite,” Composite Interfaces, Vol. 17, 2010, pp. 197-215. 19

186. Mahesh V. Hosur, Md. Mazedul Islam, Shaik Jeelani, “Processing and performance of nanophased braided carbon/epoxy composites,” Materials Science and Engineering B, 168, 2010, pp. 22-29. 187. Tarig A Hassan, Rangari, V., and Shaik Jeelani, “Synthesis, processing and characterization of shear thickening fluid (STF) impregnated fabric composites,” Mat Sci &Eng-A, 527, 2892-2899, 2010. 188. Wanda D. Jones, Rangari, V., and Shaik Jeelani, “Synthesis and characterization of (Fe3O4/MWCNTs) / Epoxy Nanocomposites,” J. Applied Polymer Science, 116, 2783-2792, 2010. 189. Rangari, V., Mohammad, Ghouse; Jeelani, Shaik; Butenko, Yuri; Dhanak, Vinod. “Synthesis and characterization of diamond coated CNTs and their reinforcement in Nylon-6 single fiber,” ACS Applied Materials & Interfaces 2010, 2 (7), 1829-1834. 190. Rangari, V., Ghouse M. Mohammad, Shaik Jeelani, Angel Hundley, Komal Vig, Shree Ram Singh and Shreekumar Pillai, “Synthesis of Ag/CNTs hybrid nanoparticles and fabrication of their Nylon-6 polymer nanocomposite fibers for antimicrobial applications,” Nanotechnology, 21, 095102, 2010. 191. Tarig A. Hassan, Rangari, V., and Shaik Jeelani., “Sonochemical synthesis and rheological properties of shear thickening dispersions,” J Ultrasonic and sonochemistry, Volume 17, Issue 5, June 2010, Pages 947-952. 192. Rangri, V., Mohammad S. Bhuyan, Shaik Jeelani, “Microwave Processing and Charactering of EPON 862/CNTs Nanocomposites,” Mat Sci & Eng –B, Volume 168, Issues 1-3, 15 April 2010, Pages 117-121. 193. Yuanxin Zhou, Yang Wang, Yuanming Xia, and Shaik Jeelani, Tensile behavior of carbon fiber bundles at different strain rates, Materials Letters, Volume 64, Issue 3, 15 February 2010, Pages 246-248. 194. Mahesh Hosur, Rajib Barua, Shaik Zainuddin, Shaik Jeelani, Ashok Kumar, Jonathan Trovillion, and Yadira Perez, “Processing and characterization of epoxy nanocomposites with MWCNT’s/CNF’s using thinky and 3-roll shear mixing techniques,” Revista Matéria, 15, pp. 247–253, 2010. 195. S. Zainuddin, M. V. Hosur, Y. Zhou, A. Tcherbi-Narteh, Ashok Kumar and S. Jeelani, “Experimental and Numerical Investigations on Flexural and Thermal Properties of Nanoclay-Epoxy Nanocomposites,” Materials Science & Engineering A, Vol. 527, 2010 pp. 7920–7926. 196. Rangari, V., Mohammad Y.Shaik, Ghouse M. Mohammad, Shaik Jeelani, Reinforcement of Si3N4 nanoparticles in Polypropylene single fibers through melt extrusion process and their properties, Journal of Applied Polymer Science , 121, 3,1512–1520, 2011. 197. Rangari, V., Mohammad S. Bhuyan, Shaik Jeelani, Comparative study of microwave and thermal curing of high temperature epoxy/CNTs polymer nanocomposites and their properties, International Journal of Nanoscience 10 (6),1225-1230, 2011. 198. M. K. Hossain, M.W. Dewan, M. V. Hosur, and S. Jeelani, “Physical, Mechanical, and Degradability Properties of Chemically Treated Jute Fiber Reinforced Biodegradable Nanocomposites,” Journal of Engineering Materials and Technology (JEMT), Vol. 133, October 2011, pp. 041003:1-7. 199. M. K. Hossain, K. A. Imran, M. V. Hosur, and S. Jeelani, “Degradation of Mechanical Properties of Conventional and Nanophased Carbon/Epoxy Composites in Seawater,”

20

Journal of Engineering Materials and Technology (JEMT), Vol. 133, October 2011, pp. 041004:1-6. 200. Chinedu U. Okoro, Mohammad K. Hossain, Mahesh Hosur, and Shaik Jeelani, “Mechanical Characterization of XD-Grade Carbon Nanotube/Epon 862 Processed by Dual Phase Dispersion Technique,” Journal of Engineering Materials and Technology (JEMT), Vol. 133, October 2011, pp. 041009:1-4. 201. M. K. Hossain, M. W. Dewan, M. V. Hosur, and S. Jeelani, “Effect of Surface Treatment and Nanoclay on Thermal and Mechanical Performances of Jute/Biopol Green Composites,” Journal of Reinforced Plastics and Composites, Vol. 30, N0. 22, 2011, pp. 1841-1856. 202. Tiffany Williams, Mahesh Hosur, Merlin Theodore, Anil N. Netravali, Vijaya Rangari and Shaik Jeelani, “Time Effects on Morphology and Bonding Ability in Mercerized Natural Fibers for Composite Reinforcement,” International Journal of Polymer Science, vol. 2011, Article ID 192865, doi:10.1155/2011/192865. 203. Mohammad K. Hossain, Mohammad W. Dewan, Mahesh Hosur and Shaik Jeelani, “Mechanical performances of surface modified jute fiber reinforced biopol nanophased green composites,” Composites, Part B., 42 (2011) 1701-1707. 204. Mohammad K Hossain, Kazi Al Imran, Mahesh Hosur and Shaik Jeelani, “Effect of Seawater on Thermal Behavior of Conventional and Nanophased Carbon/Epoxy Composites,” Cambridge Journal Online, Published online March 14, 2011. 205. Mohammad K Hossain, Mohammad W Dewan, Mahesh Hosur and Shaik Jeelani, “Thermal and Mechanical Characterization of Jute-Biopol Nanophased Green Composites,” Cambridge Journal Online 2011, DOI: 10.1557/opl.2011.169, published online January 28, 2011 206. Muhammad E. Hossain, Mohammad K. Hossain, Mahesh V. Hosur and Shaik Jeelani, “Study of Mechanical Responses and Thermal Expansion of CNF-modified Polyester Nanocomposites Processed by Different Mixing Systems,” Cambridge Journal Online, DOI:10.1557/opl.2011.111, published online January 28, 2011. 207. S. Zainuddin, M. V. Hosur, R. Barua, Ashok Kumar and S. Jeelani, “Effects of ultraviolet radiation and condensation on static and high strain rate compression behavior of nanoclay infused glass/ epoxy composites,” Journal of Composite Materials, 45(18) 2011, pp. 1901-1918. 208. Merlin Theodore, Mahesh Hosur, Jonathan Thomas, Shaik Jeelani, “Influence of Functionalization on Properties of MWCNT-Epoxy Nanocomposites,” Materials Science & Engineering A, Mater. Sci. Eng. A, Volume 528, Issue 3, 25 January 2011, pp. 1192-1200. 209. Merlin Theodore, Mahesh Hosur, Jonathan Thomas, Shaik Jeelani, “Effects of functionalisation on curing and decomposition behaviour of Epoxy-MWCNT Nanocomposites,” Polymer and Polymer Composites, Vol. 20, No. 4, 2012, pp. 343- 352. 210. M. K. Hossain, M. E. Hossain, M. V. Hosur, and S. Jeelani, “Flexural and Compression Response of Woven E-Glass/Polyester-CNF Nanophased Composites,” Composites A, 42, 2011, 1174-1182. 211. Mahesh Hosur, Rajib Barua, Shaik Zainuddin, Ashok Kumar, Jonathan Trovillion and Shaik Jeelani, “Rheology, Flexure and Thermomechanical Characterization of Epoxy/CNF Nanocomposites: Effect of Dispersion Techniques,” Polymers and Polymer Composites, Vol. 20, No. 6, 2012, pp. 517-530. 21

212. Muhammad M. Rahman, Mahesh Hosur, Shaik Zainuddin, Kailash C. Jajam, Hareesh V. Tippur, Shaik Jeelani, “Mechanical characterization of epoxy composites modified with reactive polyol diluent and randomly-oriented amino-functionalized MWCNTs,” Polymer Testing, 31, 2012, pp. 1083-1093. 213. Muhammad M. Rahman, Mahesh Hosur, Adriane G. Ludwick, Shaik Zainuddin, Ashok Kumar, Jonathan Trovillion, Shaik Jeelani, “Thermo-mechanical behavior of epoxy composites modified with reactive polyol diluent and randomly-oriented amino-functionalized multi-walled carbon nanotubes,” Polymer Testing, 31, 2012, pp. 777-784. 214. M.M. Rahman, S. Zainuddin, M. V. Hosur, J.E. Malone, M.B.A. Salam, Ashok Kumar, and S. Jeelani, “Improvements in mechanical and thermo-mechanical properties of E-glass/epoxy composites using amino functionalized MWCNTs,” Composite Structures, 94, 2012, pp. 2397-2406. 215. Yuanxin Zhou, Mahesh Hosur, Shaik Jeelani and P. K. Mallick, “Fabrication and Characterization of Carbon Fiber Reinforced Clay/Epoxy Composite,” Journal of Materials Science, 47: 2012, 5002-5012. DOI 10:1007/s 10853-012-6376-4. 216. Tarig A. Hassan, Vijay K. Rangari, Rohit K. Rana and Shaik Jeelani, Sonochemical effect on size reduction of CaCO3 nanoparticles derived from waste Eggshells, Ultrasonics Sonochemistry, 20, 5, 1308-1315, 2013. 217. Tarig hasan, Vijaya K. Rangari and Shaik. Jeelani, Mechanical and thermal properties of bio-based CaCO3/Soybean based hybrid unsaturated polyester nanocomposites, Journal of Applied Polymer Science 130,1442-1452, 2013 (Cover page article). 218. Nydeia W. Bolden, Vijaya K. Rangari and Shaik Jeelani Seyhan Boyoglu Shree R. Singh, Synthesis and evaluation of magnetic nanoparticles for biomedical applications, Journal of nanoparticles doi: 10.1002/app.39227, 2013. 219. Tarig A. Hassan, Vijay K. Rangari, Shaik Jeelani, Sonochemical Synthesis and Characterization of Bio-Based Hydroxyapatite nanoparticles, Int. J. Nano and Biomaterials, 5, 5(2-3), pp. 103–112. 220. Vijaya K Rangari, Rahman Samsur, and Shaik Jeelani, Mechanical, thermal, and conducting properties of CNTs / Bio-degradable Polymer Thin films, Journal of Applied Polymer Science, 129: 1249–1255, 2013. 221. Vijaya K. Rangari Mohammed Yousuf and Shaik Jeelani, Synthesis and characterization of SiC/Si3N4 hybrid nanoparticles and their applications in polymer single fibers, J.Composites, 2013, Article ID 462914, 11 pages, 10.1155/2013/462914. 222. Tarig. A. Hassan, Vijaya K. Rangari, Fedric Baker and Shaik Jeelani, Synthesis of hybrid SiC/SiO2 Nanoparticles and their polymer nanocomposites, International Journal of Nanoscience, Vol 12, No 2, 1350008-1350015, 2013. 223. Vijaya K. Rangari, Ghouse M Mohammad, Boyoglu, Seyhan, Shaik Jeelani, Synthesis of hybrid ZnO/CNTs nanoparticles and their reinforcement in Nylon-6 polymer fibers, Journal of Applied Polymer Science, 129, 1, 121–129, 2013. , 224. R. Samsur, V. K. Rangari, S. Jeelani, L. Zhang and Z.Y. Cheng Fabrication of CNTs grown woven carbon fiber/epoxy composites and their electrical and mechanical properties, J.Appl Phys. 113, 214903, 2013.

22

225. Mohammad Washim Dewan, Mohammad Kamal Hossain, Mahesh Hosur, and Shaik Jeelani, “Thermo-Mechanical Properties of Alkali Treated Jute-Polyester/Nanoclay Biocomposites Fabricated by VARTM Process,” accepted for publication in Applied Polymer Science, 128 (6): 4110-4123, June 15, 2013. 226. M. K. Hossain, M. E. Hossain, M.W. Dewan, M. V. Hosur, and S. Jeelani, “Effects of Carbon Nanofibers (CNFs) on Thermal and Interlaminar Shear Responses of E- Glass/Polyester Composites”, Composites, Part B, Vol. 44, Issue 1, January 2013, pp.313-320. 227. Rahman, M.M., Zainuddin, S., Hosur, M.V., Robertson, C.J., Kumar, A., Trovillion, J., Jeelani, S., “Effect of NH2-MWCNTs on Crosslink Density of Epoxy Matrix and ILSS Properties of E-glass/Epoxy Composites,” Composite Structures 95, January 2013, pp. 213-221. 228. Muhammad Rahman, Mahesh Hosur, Shaik Zainuddin, Uday Vaidya, Arefin Tauhid, Ashok Kumar, Jonathan Trovillion and Shaik Jeelani, “Effects of amino- functionalized MWCNTs on ballistic impact performance of E-glass/epoxy composites using a spherical projectile,” International Journal of Impact Engineering, 75, 2013, pp. 108-118. 229. Victor A. Agubra, Peter S. Owour, Mahesh V. Hosur, “Influence of Nanoclay Dispersion Methods on the Mechanical Behavior of E-Glass/Epoxy Nanocomposites,” Nanomaterials, 3, 550-563, dio:10.3390/nano3030550, 2013. 230. M.B.A. Salam, M.V. Hosur, N. Jahan, M.M. Rahman, S. Jeelani, “Improvement in Mechanical and Thermo-Mechanical Properties of Carbon fiber/Epoxy Composites Using Carboxyl Functionalized Multi-Walled Carbon Nanotubes,” Journal of Polymers and Polymer Composites, Vol. 21, No. 8, 2013, pp. 495-508. 231. N. Jahan, A. Narteh, M. Hosur, M. Rahman and S. Jeelani, “Effect of Carboxyl Functionalized MWCNTs on the Cure Behavior of Epoxy Resin,” Open Journal of Composite Materials, Vol. 3 No. 2A, 2013, pp. 40-47. doi: 10.4236/ojcm.2013.32A006. 232. M. Salam, M. Hosur, S. Zainuddin and S. Jeelani, “Improvement in Mechanical and Thermo-Mechanical Properties of Epoxy Composite Using Two Different Functionalized Multi-Walled Carbon Nanotubes,” Open Journal of Composite Materials, Vol. 3 No. 2A, 2013, pp. 1-9. doi: 10.4236/ojcm.2013.32A001. 233. Mahesh Hosur, Rajib Barua, Shaik Zainuddin, Ashok Kumar, Jonathan Trovillion and Shaik Jeelani, “Effect of Processing Techniques on the Performance of Epoxy/MWCNT Nanocomposites,” Journal of Applied Polymer Science, Volume 127, Issue 6, 15 March 2013, pp. 4211–4224. 234. Muhammad E Hossain, Mohammad K Hossain, Mahesh Hosur and Shaik Jeelani, “Low-Velocity Impact Behavior of CNF-Filled Glass Reinforced Polyester Composites,” Published online before print March 25, 2013, doi: 10.1177/0021998313480194. 235. Williams, T, Hosur, M., Vaidya, U., and Jeelani, S., “Effect of Alkali Treatment on Physical Properties of Bio-based Composites,” Polymers and Polymer Composites, Vol. 21, No. 1, 2013, pp. 9-19. 236. Alfred Tcherbi-Narteh, Mahesh Hosur, Eldon Triggs and Shaik Jeelani, “Effects of Surface Treatments of Montmorillonite Nanoclay on Cure Behavior of Diglycidyl Ether of Bisphenol A (DGEBA) Epoxy Resin,” Journal of Nanoscience, vol. 2013, Article ID 864141, 12 pages, 2013. doi:10.1155/2013/864141. 23

237. Boniface J. Tiimob, Vijaya K. Rangari, Shaik Jeelani, Effect of Reinforcement of Sustainable -CaSiO3 Nanoparticles in Bio-based Epoxy Resin System. J. Appl.Polym. Sci. 2014, 131, 40867. DOI : 10.1002/APP.40867. 238. Tarig A. Hassan, Vijaya K. Rangari and Shaik Jeelani, “Value added Bio-polymer nanocomposites from waste eggshell based CaCO3 nanoparticles as fillers” ACS Sustainable Chemistry & Engineering, 2014, 2 (4), 706 -717. 239. Vitus Apalangya, Vijaya Rangari, Boniface Tiimob, Shaik Jeelani and Temesgen Samuel, “Development of antimicrobial water filtration hybrid material from bio source calcium carbonate and silver nanoparticles” Applied surface science, 295, 108-114, 2014. 240. Myisha Roberson, Vijaya Rangari, Shaik Jeelani, Temesgen Samuel and Clayton Yates “Synthesis and Characterization of Silver, Zinc oxide and Hybrid silver/zinc oxide nanoparticles for antimicrobial applications” Nanolif, Published: 20 February 2014. 10.1142/S1793984414400030.2, 2, 2014.

241. Diane Render, Khalda Fadlalla, Vijaya Rangari, Temesgen Samuel and Shaik Jeelani, Bio-based Calcium Carbonate (CaCO3) Nanoparticles for Drug Delivery Applications, Int. J. Biomedical Nanoscience and Nanotechnology, 3, 3, 2014. 242. Alfred Tcherbi-Narteh, Mahesh Hosur and Shaik Jeelani, “Influence of Nanoclay on the Durability of Woven Carbon/Epoxy Composites Subjected to Ultraviolet Radiation,” Mechanics of Advanced Materials and Structures, Volume 21, Issue 3, March 2014, pages 222-236. 243. Alfred Tcherbi-Narteh, Mahesh Hosur, Eldon Triggs, Peter Owuor and Shaik Jelaani, “Viscoelastic and Thermal Properties of Full and Partially Cured DGEBA Epoxy Resin Composites Modified with Montmorillonite Nanoclay Exposed to UV Radiation,” Polymer Degradation and Stability, Vol. 101, 2014, pp. 81-91. 244. Mohammad K Hossain, Md. Mahmudur R Chowdhury, Kazi A Imran, Mahmud B Salam, Mahesh Hosur and Shaik Jeelani, “Effect of Low Velocity Impact Responses on Durability of Conventional and Nanophased CFRP Composites Exposed to Seawater,” Polymer degradation and stability, Vol.99, 2014, pp.180-189. 245. S. Zainuddin, A. Fahim, T. Arefin, M. V. Hosur, M. M. Rahman, J.D. Tyson, S. Jeelani, “Optimization of Mechanical and Thermo-Mechanical Properties of Epoxy and E-Glass/Epoxy Composites Using NH2-MWCNTs, Acetone Solvent and Combined Dispersion Methods”, Composite structures, 110 (2014) 39-50. 246. S. Zainuddin, T. Arefin, M. V. Hosur, J.D. Tyson, Ashok Kumar, J. Trovillion, S. Jeelani, “Recovery and Improvement in low-velocity impact properties of E- glass/epoxy composites through novel self-healing technique,” Composite structures, Vol. 108, 2014, pp. 277-286. 247. Mohammad K. Hossian, Md. Mahmudur R. Chowdhury, Mahmud B. Salam, Jonathan Malone, Mahesh Hosur, Shaik Jeelani, Nydeia Wright Bolden, “Improved Thermo-Mechanical Properties of Carbon Fiber Reinforced Epoxy Composite using Amino Functionalized XDCNT,” Journal of Applied Polymer Science, Volume 131, Issue 17, 5 September 2014. 248. Hossain, M.K., Karim, M.R., Chowdhury, M.R., Imam, M.A., Hosur, M., Jeelani, S., Farag, R., “Comparative mechanical and thermal study of chemically treated and untreated single sugarcane fiber bundle,” Industrial Crops and Products, vol. 58, 2014, pp. 78-90.

24

249. Muhammad M. Rahman, Mahesh Hosur, Shaik Zainuddin, Nusrat Jahan, Everett B. Miller-Smith, Shaik Jeelani, “Enhanced tensile performance of epoxy and E- glass/epoxy composites by randomly-oriented amino-functionalized MWCNTs at low contents,” Journal of Composite Materials, 0021998314525977, first published on March 10, 2014. 250. Md. Reza-E-Rabby, Shaik Jeelani, Vijaya K. Rangari, “Structural Analysis of Polyhedral Oligomeric Silsesquioxane (POSS) coated SiC Nanoparticles and Their Applications in Thermoset Polymers”, J. Nanomaterials-2015. 251. B. Tiimob, V. Apalangya, T. Samuel, S. Jeelani, V. Rangari, Synthesis, characterization and in vitro cytotoxicity assessment of eggshell-derived β-CaSiO3 nano biomaterial, British Journal of Applied Science and Technology, 8(2): 180-193, 2015, Article no. BJAST.2015.196 252. Akm Samsur Rahman, Vijaya Rangari, and Shaik Jeelani “Thermal and Mechanical Properties of Woven Glass Fiber Reinforced Epoxy Composites with Carbon Nanotubes Grown in-Situ”. The International Journal of Engineering and Science (IJES) 4, 12, 54-61, 2015. 253. Md. Reza-E-Rabby, Shaik Jeelani, Vijaya K. Rangari Microwave processing of SiC nanoparticles infused polymer composites: Comparison of thermal and mechanical properties, J. Applied Polymer Science 132, 12, 2015. 254. Dereca Watkins, Md. Nuruddin, Mahesh Hosur, Alfred Tcherbi-Narteh and Shaik Jeelani, “Extraction and Characterization of Lignin from Different Biomass Resources,” Journal of Materials Research and Technology, 2015, 4(1), pp. 26-32, http://dx.doi.org/10.1016/j.jmrt.2014.10.009. 255. Muhammad M. Rahman, Mahesh Hosur, Kuang-Ting Hsiao, Landon Wallace, Shaik Jeelani, “Low velocity impact properties of carbon nanofibers integrated carbon fiber/epoxy hybrid composites manufactured by OOA-VBO process,” Composite Structures, Vol. 120, February 2015, pp. 32-40. 256. Md. Ekramul Islam, Muhammad M. Rahman, Mahesh Hosur, Shaik Jeelani, “Thermal stability and kinetics analysis of epoxy composites modified with reactive polyol diluent and multi-walled carbon nanotubes,” Journal of Applied Polymer Science, Vol. 132, No. 9, March 5, 2015, DOI:10.1002/APP.41558. 257. Md. Ekramul Islam, Tanjheel H Mahdi, Mahesh V Hosur, Shaik Jeelani, "Characterization of Carbon Fiber Reinforced Epoxy Composites Modified with Nanoclay and Carbon Nanotubes," Procedia Engineering (Elsevier), 105, pp. 821- 828, 2015. 258. Md. Nuruddin, M., Hosur, M., Uddin, M. J., Baah, D. and Jeelani, S., “A novel approach for extracting cellulose nanofibers from lignocellulosic biomass by ball milling combined with chemical treatment,” 2015, J. Appl. Polym. Sci., 133, 42990, doi: 10.1002/app.42990 259. M. E. Hossain, M. K. Hossain, M. V. Hosur, S. Jeelani, “Effect of Dispersion Conditions on the Thermal and Mechanical Properties of Carbon Nanofiber-Polyester Nanocomposites,” Journal of Engineering Materials and Technology, July 2015, Vol. 137/31005:1-9. 260. Md. Nuruddin, Raju Gupta, Alfred Tcherbi-Narteh, Mahesh Hosur, Shaik Jeelani, “Synergistic Effect of Graphene Nanoplatelets and Nanoclay on Epoxy Polymer Nanocomposites,” Advanced Materials Research 2015, Vol. 1119 pp. 155-159, doi/10.4028/www.scientific.net/AMR.1119.155. 25

261. Reaz Chowdhury, Mahesh Hosur, Md. Nuruddin, Alfred Tcherbi-Narteh, Ashok Kumar, Veera Boddu, Jonathan Trovillion and Shaik Jeelani, “Self-Healing epoxy composite- Preparation, characterization and healing performance,” Journal of Materials Research and Technology, 2015, 4(1), pp. 33-43, http://dx.doi.org/10.1016/j.jmrt.2014.10.016. 262. Diane Render, Temesgen Samuel, Howard King, Madan Vig, Shaik Jeelani, Ramapuram Jayachandra Babu, and Vijaya Rangari “Biomaterial-Derived Calcium Carbonate Nanoparticles for Enteric Drug Delivery” Journal of Nanomaterials, 2016, Article ID 3170248, 8 pages, http://dx.doi.org/10.1155/2016/3170248. 263. Boniface Jabik Tiimob, Shaik Jeelani, Vijaya Kumar Rangari, Eggshell reinforced biocomposite-an advanced ‘green’ alternative structural material, Journal of Applied Polymer Science- 2016, 133, 43124. 264. Muhammad A. Imam, M.G. Gomes, Eesperidiana.A.B. Moura, Shaik Jeelani and Vijay.K.Rangari, “Electron-beam irradiation effect on thermal and mechanical properties of Nylon-6 nanocomposite fibers infused with Diamond and Diamond coated Carbon Nano Tubes”, International Journal of Nanoscience, 15, 1-2, 1650004- 12, 2016. 265. Fahim Abdullah, Shaik Zainuddin, Shaik Shoeib, Mahesh Hosur, Dawen Li, Mackenzie Matthews, Shaik Jeelani, “Properties of Polyhydroxy Butyrate Polyvalerate Biopolymeric Nanocomposites Reinforced with Natural Halloysite Nanotubes,” Journal of Material Science and Technology Research 3, 2016, 7-16, 10.15377/2410-4701.2016.03.01.2. 266. S. Zainuddin, F. Abdullah, S. Shoieb, M. Hosur, D. Li, C. Hicks, S. Jeelani, “Morphological and Mechanical Behavior of Chemically Treated Jute-PHBV Bio- Nanocomposites Reinforced With Silane Grafted Halloysite Nanotubes,” Journal of Applied Polymer Science, Vol. 133 (39), 2016, DOI:10.1002/app.43994 267. Alfred Tcherbi-Narteh, Mahesh Hosur, Shaik Jeelani, “Effects of Different Montmorillonite Nanoclay Loading on Cure Behavior and Properties of Diglycidyl Ether Bisphenol A Epoxy,” Journal of Nanomaterials, Volume 2016, Article ID 3840348, 12 pages, 2016, doi:10.1155/2016/3840348. 268. Shatori Meadows, Mahesh Hosur, Alfred Tcherbi-Narteh and Shaik Jeelani, “Rheological and Cure Kinetics Studies of PET-based Unsaturated Polyester Resin,” Journal of Advanced Materials, Feb. 2016, Vol. 1, pp. 84-99. 269. Manik C. Biswas, Shaik Jeelani, Vijaya Rangari, Influence of Biobased Silica/Carbon hybrid nanoparticles on Thermal and Mechanical Properties of Biodegradable Polymer films, Composites Communications., 4, 43-53, 2017. 270. Tiimob, Boniface; Mwinyelle, Gregory; Abdela, Woubit; Samuel, Temesgen; Jeelani, Shaik; Rangari, Vijaya, “Nano-engineered eggshell-silver tailored co- polyester polymer blend film with antimicrobial properties" Journal of Agricultural and Food Chemistry, 65, 9, 1967-1976, 2017 (DOI: 10.1021/acs.jafc.7b00133). 271. Tanjheel Mahdi, Ekramul Islam, Mahesh Hosur, Shaik Jeelani, “Low Velocity Impact Performance of CFRPs Modified with Carbon Nanotube, Nanoclay and Hybrid Nanoparticles,” Journal of Reinforced Plastics, Vol. 36 (9), 2017, pp. 696-713. 272. Mahesh Hosur, Tanjheel H. Mahdi, Mohammad E. Islam, S. Jeelani, Mechanical and “Viscoelastic Properties of Epoxy Nanocomposites Reinforced with Carbon Nanotubes, Nanoclay and Binary Nanoparticles,” Journal of Reinforced Plastics, Vol. 36 (9), 2017, pp. 667-684. 26

273. Md. Nuruddin, Mahesh Hosur, Raju Gupta, Gaurav Hosur, Alfred Tcherbi-Narteh, and Shaik Jeelani, “Cellulose Nanofibers-Graphene Nanoplatelets Hybrids Nanofillers as High-Performance Multifunctional Reinforcements in Epoxy Composites,” Polymer and Polymer Composites, Vol. 25, Issue 4, 2017, pp. 273-284. 274. Md. Nuruddin, Mahesh Hosur, Tanjheel Mahdi, Shaik Jeelani, “Flexural, Viscoelastic and Thermal Properties of Epoxy Polymer Composites Modified with Cellulose Nanofibers Extracted from Wheat Straw,” Sensors & Transducers, 210 (3), 2017, pp. 1-8. 275. Mohanad Idrees, Vijay Rangari, and Shaik Jeelani, 3D Printed Sustainable Biochar- Recycled PET Composite, ACS Sustainable Chemistry and Engineering- 2018, 6 (11), pp 13940–13948. 276. Mohanad Idrees, Vijay Rangari, and Shaik Jeelani, Sustainable Packaging Waste- Derived Activated Carbon for Carbon Dioxide Capture, Journal of CO2 Utilization 26, 380-387, 2018. 277. Vitus Apalangya Vijaya Rangari, Shaik Jeelani, Enock Dankyi, Abu Yaya, Samuel Darko, Rapid microwave synthesis of needle-liked hydroxyapatite nanoparticles via template directing ball-milled spindle-shaped eggshell particles, Ceramics International 44 (2018) 7165–7171. 278. Boniface J. Tiimob, Vijaya K. Rangari, Gregory Mwinyelle, Woubit Abdela, Paul G. Evans, Nicholas Abbott, Temesgen Samuel, Shaik Jeelani, Tough aliphatic-aromatic copolyester and chicken egg white flexible biopolymer blend with bacteriostatic effects, Food Packaging and Shelf Life 15 (2018) 9–16. 279. Mahesh Hosur, Tanjheel Mahdi, Shaik Jeelani, “Studies on the Performance of Multi- Phased Carbon/Epoxy Composites with Nanoclay and Multi-Walled Carbon Nanotubes,” Multidisciplinary Modeling, Experiments and Design, 1(4), 2018, pp. 255-268. 280. Shatori Meadow, Mahesh Hosur, Yusuf Celikbag, Shaik Jeelani, “Comparative Analysis on the Epoxidation of Soybean Oil Using Formic and Acetic Acids,” Polymers and Polymer Composites, Vol. 26, No. 4, 2018, pp. 289-297. 281. Vitus A. Apalangya, Vijaya K. Rangari, Boniface J. Tiimob, Shaik Jeelani, and Temesgen Samuel, Eggshell Based Nano-Engineered Hydroxyapatite and Poly(lactic) Acid Electrospun Fibers as Potential Tissue Scaffold, International Journal of Biomaterials, Volume 2019, Article ID 6762575, 11 pages, https://doi.org/10.1155/2019/6762575 282. Muhammad A Imam, Shaik Jeelani, and Vijaya K Rangari, Thermal Decomposition and Mechanical Characterization of PLA and Potato Starch Blend Reinforced with Bio-waste SiO2”, Journal of Composite Materials-53, 16, 2315-2334 -2019. 283. Manik C.Biswas, Boniface J.Tiimob, WoubitAbdela, ShaikJeelani, and Vijaya K.Rangari “Nano Silica-Carbon-Silver ternary hybrid induced antimicrobial composite films for food packaging applications”, Food Packaging and self-life, 19, 2019, 104-113. 284. Farooq Syed, Shaik Zainuddin, Andrea Mills, Mahesh Hosur, Shaik Jeelani, “Crosslinking and Interfacial Behavior of Carboxylic Functionalized Carbon nanotube Epon Nanocomposites: A Molecular Dynamics Simulation Approach,” Spring Nature Applied Sciences, 2019, 1:1423, https://doi.org/10.1007/s42452-019- 1441-0, Published online 10/16/2019.

27

285. Farooq Syed, Shaik Zainuddin, Isaiah Wilson, Mohamed Elafandi, Shaik Jeelani, “Quantitative Nanomechanical Property Mapping and in situ SPM Imaging of Polyetherimide Nanocomposites,” Microsc. Microanal. 25 (2), 2019, 704-705, doi:10.1017/S1431927619004252 286. Farooq Syed, Shaik Zainuddin, Mohamed Elafandi Isaiah Wilson, Haibin Ning, Shaik Jeelani, “High-Speed Nanomechanical Property Mapping of Polyetherimide/Zinc Titanate Nanocomposites,” Modern Concepts in Materials Science 1(5), 2019, MCMS.MS.ID.000522. 287. Zaheeruddin Mohammed Shaik Jeelani, Vijaya Rangari, Effect of Low-Temperature Plasma Treatment on Surface Modification of Polycaprolactone Pellets and Thermal Properties of Extruded Filaments, JOM (2020). https://doi.org/10.1007/s11837-020- 04004-y.

Papers Presented at Technical Meetings

1. Jeelani, S. and Bailey, J. A. “Surface Integrity in Machining 18% Nickel Marging Steel”, Presented at the 1974 Annual Conference of the Society of Manufacturing Engineering, Dearborn, Michigan, 1974. SME Technical Paper No. IQ74-185. 2. Bailey, J. A., Jeelani, S. and Becker, S. E. “Surface Integrity in Machining AISI 4130 Steel”, Presented at the ASME Winter Annual Meeting, Nov. 30- Dec. 5, 1975, Houston, Texas. ASME paper No. 75-WA/Prod –33. 3. Jeelani, S. and Natarajan, R. “Residual Stresses in Machining Using Finite Element Methods”. Presented at the ASME International Computer Engineering Conference, August 7-11, 1983, Chicago, Illinois. 4. Jeelani, S. and Natarajan, R. “Determination of Residual Stresses in a Ring Due to Machining”. Presented at the 1984 ASME International Computers in Engineering Conference, August 12-17, 1984, Las Vegas, Nevada. Computers in Engineering, 1984 Vol. 2, pp. 773-777. 5. Jeelani, S. and Natarajan, R. “Residual Stress Distribution in 2024-T351 Aluminum Alloy” Presented at the 1985, Boston, Massachusetts. ASME Conference on Computers in Engineering 1986, Vol. 2.2, pp. 59-63. 6. Jeelani, S. and Biswas, S. “Effect of Curing Conditions on the Strength of Adhesively Bonded Joints”. Presented at the Annual meeting of the Adhesion Society, February 1986, Charleston, South Carolina. 7. Jeelani, S. and Mazumdar, P. “Stain Localization in Fatigue and the Physical Basis of the Coffin-Mason Relationship”. Presented at the Southeastern Conference on Theoretical and Mechanics (SECTAM), April 1986, Columbia, South Carolina. 8. Jeelani, S. and Pilot, D. “A study of Cumulative Fatigue Damage in AISI 4130 Steel and Titanium 6 A1-4V Alloy”, Presented at the 1986 NASA- HBCU Forum, Atlanta, Georgia, April 1986. 9. Jeelani, S. and Mazumdar. P. “Plastic Deformation – Its Role in Fatigue Crack Propagation”. Presented at the 1986 NASA-HBCU Forum, Atlanta, Georgia, April 1986. 10. Jeelani, S. “Effect of Cutting Speed and Tool Rake Angle on Residual Stress Distribution in Machining 2024-T351 Aluminum Alloy”. Presented at the 1986 NASA-HBCU Forum, Atlanta, Georgia, April 1986. 11. Jeelani, S. and Collins, M. “Effect of Electric Discharge Machining on the Fatigue 28

Life of Inconel 718 Allow”. Presented at the 1986 NASA-HBCU Forum, Atlanta, Georgia, April 1986. 12. Jeelani, S. and Biswas, S. “Effect of Curing Conditions on the Strength of Adhesively Bonded Joints”. Presented at the 1986 NASA-HBCU Forum, Atlanta, Georgia, April 1986. 13. Jeelani, S., Natarajan, R. and Hall, Marcus. “Design of a Sub-Sized Fatigue Specimen”. Presented at the 1986 NASA-HBCU Forum, Atlanta, Georgia, April 1986. 14. Jeelani, S, Natarajan, R. and Reddy, R. G. “Computer Aided Design of a Sub- Sized Fatigue Specimen”. Presented at the 1986 ASME International Computers in Engineering Conference, Chicago, IL, July 20-24, 1986. 15. Jeelani, S. and Collins, M. “Effect of Electric Discharge Machining on the Fatigue Life of Inconel 718 Allow”. Presented at the 1986 Fall Meeting of the Metallurgical Society, October 5-9, 1986 Orlando, FL. 16. Jeelani, S. Natarajan, R. “Residual Stress Distribution in Machining AISI 4130 Steel Using Finite Element Techniques”, Presented at the 1986 ASME International Computers in Engineering Conference, New York, August 1987. 17. Jeelani, S. “A Sub-Sized Fatigue Specimen”. Presented at the 1987 NASA- HBCU Forum, Atlanta, Georgia, October 1987. 18. Jeelani, S. “An Investigation of Surface Damage in Fatigue Specimens”. Presented at the 1987 NASA-HBCU Forum, Atlanta, Georgia, and October 1987. 19. Jeelani, S. and Collins, M. “Effect of Electric Discharge Machining on the Fatigue Life of Inconel 718”. Presented at the 1987 NASA-HBCU Forum, Atlanta, GA, October 1987. 20. Jeelani, S and Pilot, D. “Residual Stress Distribution in AISI 4130 Steel Due to Machining”. Presented at the 1987 NASA-HBCU Forum, Atlanta, GA, and October 1987. 21. Jeelani, S. and Biswas S. “A DSC Method to Monitor the Presence of Water Absorbed by FM7 Epoxy Adhesive”. Presented at the 1987 NASA-HBCU Forum, Atlanta, GA, October 1987. 22. Jeelani, S. and Jordan, K. “Study of the Integrity of Bond Between Carbon/Phenolic and Graphite/Phenolic Composites”, Presented at the 1987 NASA-HBCU Forum, Atlanta, GA, October 1987. 23. Jeelani, S. “Effect of Grinding on the Fatigue Life of Titanium Alloy (5A1-2.55Sn) Under Dry and Wet Conditions”. Presented at the 1989 NASA- HBCU Forum, Huntsville, AL, March 1989. 24. Mahfuz, H., Xue, D., Jeelani, S., Baker, D. and Johnson, S. “Characterization of High Cycle Fatigue Behavior of Titanium 5A1-2.5Sn Alloy”, Presented in the 1991 SEM Spring Conference on Experimental Mechanics, June 10-13 at Milwaukee. 25. Mahfuz, H., Das, P., Baker, D., Jeelani, S. and Johnson, S. “Fatigue and Flexural Response of Advanced Carbon/Carbon Composites at Room and Elevated Temperatures, 16th Annual Conference OF The American Ceramic Society on Composites Materials and Structures, January 12-15, 1992, Cocoa Beach, FL., Ceramics Engineering and Science Proceedings, Vol. 1, pp.449-468. 26. Baker, D., Mahfuz, H. and Jeelani, S “Characterization of Refractory Materials for NASA Fastener Applications, 16th Annual Conference on Composites Materials and Structures, The American Ceramic Society, January 12-15, 1992, Cocoa Beach, FL. 29

27. Mahfuz, H., Xue, D., Jeelani, S. and Baker, D. M. “Non-Linear Response of 2D Carbon-Carbon Composites by Layered Shell Elements”, Developments in Theoretical and Applied Mechanics, Vol. 16, pp. III.1.62-72, Proceedings of the 1992 Southeastern Conference on Theoretical and Applied Mechanics (SECTAM). 28. Mahfuz, H., Das. P., Jeelani, S., Baker, D. and Johnson, S. “Fatigue Characterization of Advanced Carbon-Carbon Composites”, Proceedings of the 1992 SEM VII International Congress on Experimental Mechanics , Vol. 2, pp. 1368- 1373, 1992. 29. Mahfuz, H., Ingram, C. I. And Jeelani, S. “Compressive Response of Thermoplastic Composites by Layered Shell Elements”, 1992 ASME Conference on Computers in Engineering, Vol. 2, pp. 95-101. 30. Mahfuz, H., Das. P., Jeelani, S., Baker, D. and Johnson, S. “Experimental and Finite Element Analysis of Advanced Carbon-Carbon (ACC-4) Composite under Tensile Loading”, Proceedings of the International Conference on Advanced Composites, Sydney, Australia, February, 1993, Vol. 1, pp. 1369-1395. 31. Mahfuz, H., Das. P., Jeelani, S., Baker, D. and Johnson, S. “Experimental and Finite Element Analysis of Advanced Carbon-Carbon (ACC-4) Composite under Tensile Loading”, Proceedings of the International Conference on Advanced Composites, Sydney, Australia, February, 1993, Vol. 1, pp. 1369-1395. 32. Mahfuz, H., Das, P., Xue, D., Krishnagopalan, J. and Jeelani, S. “A combined Experimental and Finite Study to Predict the Failure Mechanisms in SiC Coated Carbon/Carbon Composites at Room and Elevated Temperatures Under Flexural Loading”, Proceedings of the International Conference on Composite Materials (ICCM/9), Madrid, Spain, July 12-16, 1993, Vol. 2, pp. 508-515. 33. Mahfuz, H., Das, P., Xue, D. and Jeelani, S. “Response of SiC Coated Carbon/Carbon Composites under Flexural Loading- A Combined Experimental and Finite Element Study”, 3rd International Symposium on Advanced Materials (ISAM/3), Islamabad, Pakistan, September 20-25, 1993, Vol. 1. pp. 685-695. 34. Sulaiman, A., Yang, J., Jeelani, S. and Mahfuz, H. “Stress and Stability Analysis of Thick Fiber Reinforced Laminated Composite Plates, Using Finite Element Method”, 1993 ASME Conference on Computers in Engineering, Vol. 1, pp. 499- 506. 35. Mahfuz, H., Xue, D. and Jeelani, S. “Response of Advanced Carbon/Carbon Composites under Tensile Loading”, 3rd Pacific Rim Forum on Composite Materials, Honolulu, Hawaii, November 2-4, 1993. 36. Vaidya. U. K., Mahfuz, H. and Jeelani, S. “Vibration and Ultrasonic Nondestructive Characterization on Non-Woven and Fabric Reinforced Carbon/Carbon Composites”, 25th International SAMPE Conference, Philadelphia, October 26-28, 1993, pp. 347-352. 37. Haque, A., Mahfuz, H., Yu, T. and Jeelani, S. “Effect of Processing Parameters on Property Changes of Resin Transfer Molded Materials”, 25th International SAMPE Conference, Philadelphia, October 26-28, 1993, Vol. 25, pp. 305-319. 38. Mahfuz, H. Zadoo, D., Wilks, F., Muneeruzzaman, M. and Jeelani, S. “Fracture and Flexural Characterization of Monolithic SiC and SiCw/SiC Composites at Room and Elevated Temperatures”, 18th Annual Conference, American Ceramic Society (AcerS), Cocoa Beach, FL, January 9-14, 1994, Vol. 15. No. 4, pp. 219-232. 39. Vaidya, U. K., Mahfuz, H. and Jeelani, S. “NDE of Structural and Functional 30

Carbon/Carbon Composite after First Carbonization”, 18th Annual Conference of the American Ceramics Society, Cocoa Beach, FL, January 9-14, 1994, Vol. 15, No. 4, pp. 591-598. 40. Vaidya, U. K., Mahfuz, H. and Jeelani, S. “NDE of Novel Hybrid Structural Carbon Composites”, Proceedings of International Conference on Composites Engineering (ICCE-1), pp. 316-317, New Orleans, July 23, 1994. 41. Vaidya, U. K., Mahfuz, H. and Jeelani, S. “Hybridization Concepts and NDE of Carbon-Carbon Composites”, 26th International SAMPE Conference, Atlanta, GA, September 1994. Vol. 26, pp. 483-490. 42. Vaidya, U. K., Mahfuz, H. and Jeelani, S. “Development of Nondestructive Characterization of Non-Woven Carbon Composites”, Proceedings of INDA- TEC’94 Conference, Vol. 1, pp. 31-37., Baltimore, September 22-24, 1994. 43. Vaidya, U. K., Mahfuz, H. and Jeelani, S. “NDE of Structural and Functional Carbon-Carbon Composites”, ASME Winter Annual Meeting, Chicago, IL. November 6-11, 1994 NCA-Vol. 18, pp.103-109. 44. Vaidya, U. K., Mahfuz, H. and Jeelani, S. “Fabric Architectures – Processing – NDE Relationships in the Development of Carbon-Carbon Composites”, ASME Winter Annual Meeting, Chicago, IL, November 6-11, 1994. 45. Mahfuz, H., Haque, A., Grant, G. and Jeelani, S. “Fracture Behavior of SiCf/Si3N4 Composites”, First International Conference on Composites Engineering (ICCE/1), August 28-31, 1994, Vol. 1, pp.538-539. 46. Vaidya, U. K., Mahfuz, H. and Jeelani, S. “Hybridization Concepts and NDE of Carbon-Carbon Composites”, 26th International SAMPE Conference, September 1994, Atlanta, GA, Vol. 26, pp. 483-490. 47. Vaidya. U. K., Mahfuz. H. and Jeelani, S. “NDE of Innovative Hybrid Functional Carbon Fiber Composite”, First International Conference on Composites Engineering (ICCE/1), August 28-31, 1994, Vol. 1. pp. 538-539. 48. Mahfuz, H., Haque, A., Yu, D., Robinson, D. and Jeelani, S. “Reverse Fatigue of Resin Transfer Model Composites”, International Conference on Design and Manufacturing using Composites (ATMAM ’94), August 10-12, 1994, Vol. 1, pp.23- 32. 49. Mahfuz, H., Muneeruzzaman, M., Vaidya, U. K., Krishnagopalan, J. and Jeelani, S. “Fatigue Damage and Effects of Stress Ratio on the Fatigue Life of Carbon-Carbon Composites’, International Conference on Design and Manufacturing using Composites (ATMAM’94), August 10-12, 1994, Vol. 1, pp. 488-492. 50. Vaidya, U. K., Mahfuz, H., Krishnagopalan, J. and Jeelani, S. “Development and Nondestructive Evaluation of Foam Core Composites”, ASME International Congress of Mechanical Engineering and Exposition, NCA Vol. 18, DE-Vol. 80, Materials for Vibration and Noise Control, PP. 103-108, 1994. 51. Mahfuz, H., Mian, A. K. M. A., Vaidya, U. K. and Jeelani, S. “Prediction of Fiber- Matrix Interface Failure Due to Longitudinal Tensile Loading”, Materials Research Society (MRS), Fall Meeting, November 27-December 2, 1994, Boston, Massachusetts, MRS Symposium Proceedings, Vol. 365, pp. 229-236. 52. Vaidya, U. K., Mahfuz, H. and Jeelani, S. “Nondestructive Evaluation/Characterization of Hybrid and Sandwich Carbon/Carbon Composites, 19th Annual Conference, American Ceramic Society (AcerS), Cocoa Beach, FL, January 8-12, 1995, Vol. 16, No. 4, pp. 289-298. 31

53. Mahfuz, H., Saha, M., Haque, A., Vaidya, U. K. and Jeelani, S. “Fatigue Damage and Residual Strength of Resin Transfer Molded Composites under Reverse Cyclic Loading”, ASME Conference, Innovative Processing and Characterization of Composite Materials, 1995, NCA-Vol. 20/ADM-Vol. 21 1, pp. 77-88. 54. Mahfuz. H., Vaidya U. K., Muneeruzzaman, Brown, T. and Jeelani, S. “Room and

High Temperature Fatigue Damage Evaluation of SiCf/Si3N4 Composites”, 19th Annual Conference, American Ceramic Society, Cocoa Beach, FL, January 8-12, 1995, Vol. 16, No. 4, pp. 351-360. 55. Vaidya, U. K., Haque, A., Mahfuz, H. and Jeelani, S. “Effect of Short Fiber Reinforcement Modification and Fabric Architecture on Ultrasonic and Acoustic Emission Parameters of Carbon/Phenolic and Carbon Composites”, 4th Annual Research Symposium, American Society of Nondestructive Testing (ASNT) March 21-23, 1995, pp. 244-246. 56. Mahfuz, H., Vaidya, U. K., Muneeruzzaman, M., Brown, T. and Jeelani, S. “Fatigue Damage Analysis of SiCf/Si3N4 Composites Under Cyclic Loading at Elevated Temperature, American Ceramic Society (AcerS), Annual Meeting and Exposition, April 30-May 4, 1995, Cincinnati, OH. 57. Mahfuz. H., Saha, M., Vaidya, U. K. and Jeelani, S. “Impact Damage and Residual Strength of Resin Infiltrated Toughened Graphite/Epoxy Panel”, 10th International Conference on Composite Materials (ICCM-10), August 1995, Vancouver, Canada, Vol. V, pp. 671-678. 58. Mahfuz, H., Saha, M., Vaidya, U. K., Biggs, R. and Jeelani, S. “Prediction of the Dynamic Response of Toughened Graphite/Epoxy Composite Plates at Low Velocity Impact-A Numerical Study”, 27th International SAMPE Technical Conference, October 1995, Albuquerque, New Mexico, Vol. 27, pp. 830-842. 59. Mahfuz, H., Saha, M., Haque, A., Vaidya, U. K., Yu, D. and Jeelani, S. “Fatigue Damage and Residual Strength Evaluation of Resin Transfer Molded (RTM) Composites under Reversed Cyclic Loading”, International Mechanical Engineering Congress and Exposition, 1995 Winter Annual Meeting of the ASME, NCA- VOL.20/AMD-Vol. 211, November 12-17, 1995, San Francisco CA. 60. Gajiwala, H., Vaidya, U. K., Sodah, S. and Jeelani, S. “Novel Processing Techniques for Low Porosity Carbon-Carbon Composites”, ASME International Congress of Mechanical Engineering, CA_Vol. 20, pp. 241-248, 1995. 61. Vaidya, U. K., Mahfuz, H. and Jeelani, S. "Acoustic-Ultrasonic Characterization of Carbon-Carbon Composites with Stretch Broken Fabric Architecture", 10th International Conference on Composite Materials (ICCM-10), August 1995, Vol. V, pp. 511-526. 62. Mahfuz, H., Mian A. K. M. A., Vaidya, U. K, Brown, T. and Jeelani, S. "Study of the Interface Behavior of SiCf/Si3N4 Composites Using a 3-D Unit Cell Model", 4th International Symposium n Advanced Materials (ISAM-4), Islamabad, Pakistan, Sept. 17-21, 1995, Vol. 1, pp. 667-677. 63. Vaidya, U. K., Mahfuz, H. and Jeelani, S. “ Hybridization Concepts in the Development and Nondestructive Characterization of Carbon-Carbon Composites”, Proceedings of the 27th International SAMPE Technical Conference, pp. 453-460, Albuquerque, New Mexico, October 1995, 64. Vaidya, U. K., Wheeler, R., Mahfuz, H. and Jeelani, S. "Compression Behavior and NDE of Stiffened Panels", 27th International SAMPE Technical Conference, 32

October 1995, Albuquerque, New Mexico, Vol. 27, pp. 711-721. 65. Mahfuz, H., Vaidya, U. K., Haque, A. and Jeelani, S. “ Experimental and Finite Element Study of Static Compression and Reverse Fatigue Behavior of Thick Section Composites”, 6th International Conference on Marine Applications of Composite Materials (MACM’96), March 19-21, 1996, Cocoa Beach, FL 66. Haque, A., Vaidya, U. K., Mahfuz, H. and Jeelani, S. “Effect of Fiber Orientation on HRS Response of Glass Fiber Reinforced Composites”, 28th International SAMPE Conference, October 12-15, 1996, Seattle, WA. 67. Vaidya, U. K., Sodah, S. and Jeelani, S. “Toughening and Densification Concepts Applied to Development of Carbon/Carbon Composites”, ASME International Congress of Mechanical Engineering, NCA, Vol. 2, pp.34- 40, 1996. 68. Haque, A., Vaidya, U. K., Mahfuz, H. and Jeelani, S. “NDE of Thick Section Composites under Static Compression and Cyclic Loading”, 14th World Conference on Nondestructive Testing, New Delhi, December 6-13, 1996. 69. Vaidya, U. K., Fotedar, K., Mahfuz, H. and Jeelani, S. “Process Related Defects and High Strain Rate Impact Damage Evaluation of Resin Transfer Molded Composites Through a comprehensive NDE Approach”, 14th World Conference on Nondestructive Testing, New Delhi, December 6-13, 1996. 70. Vaidya, U. K., Haque, A., Mahfuz, H. and Jeelani, S. “Sensor-Property-NDE Relationship of Polymeric Composites Processed Through Resin Infusion”, Smart Materials and MEMS, SPIE-96, Vol. 331, pp. 654-667, December 11-14, 1996, Bangalore, India. 71. Mahfuz, H., Haque, A., Jeelani, S. and Vaidya, U. K. “Fatigue Behavior of Carbon/Carbon (C/C) and Ceramic Matrix Composites (CMC)- Experimental and Statistical Analyses”, Symposium on Processing, Characterization, and Modeling of High Temperature Monolithic and Composite Materials, The 1997 Joint ASME/ASCE/SES Summer Meeting, June 29-July 02,1997, Northwestern University, Evanston, IL. 72. 72. Mahfuz, H., Gama, B., Raines, R., Haque, A. and Jeelani, S. "Finite Element Modeling of the High Strain Rate Behavior of S-2 Glass/Vinyl Ester Composites Under Compressive Loading," 11th International Conference on Composite Materials (ICCM-11), Melbourne, Australia, July 1997, Volume V, pp. 819-829. 73. Mahfuz, H., Gama, B., Raines, R., Haque, A. and Jeelani, S. "High Strain Rate Compression Behavior of Matrix Materials," 5th International Symposium on Advanced Materials (ISAM - 5), Islamabad, Pakistan 1997, Proceedings: pp. 1-9. 74. 74. Mahfuz. H., Gama, B., Raines, B. and Jeelani, S. "High Strain Rate Behavior of Woven Composites,” 4th International Conference on Composites Engineering (ICCE - 4), Hawaii, July 6-11, 1997, Vol. 1, pp. 631-632. 75. Haque, A., Johnson, J., Vaidya, U. K., and Jeelani, S. “Static Compression and Compression-Compression Fatigue of S2-Glass/Vinyl-Ester Composites," 4th International Conference on Composites Engineering (ICCE-4), Hawaii, July 6-11, 1997, Vol. 1, pp. 408-409. 76. Vaidya, U. K., Krishnagopalan, J., Haque, A., Mahfuz, H. and Jeelani, S. "Non- Destructive Characterization and Low Velocity Impact Response of Integral Armor Components," 4th International Conference on Composites Engineering (ICCE - 4), Hawaii, July 6-11, 1997, Vol. 1, pp. 1009-1010. 77. Mahfuz, H., Gama, B., Raines, R. and Jeelani, S. "High Strain Rate Behavior of the 33

Component Materials of an Integral Armor," 29th International SAMPE Technical Conference, October 29 - Nov. 1, 1997, pp. 614-624. 78. Mahfuz, H., Rahman, M., Das, P., Vaidya, U. K. and Jeelani, S. "Finite Element Analysis of Composite Isogrid Cylinders," 29th International SAMPE Technical Conference, October 29 - Nov. 1, 1997, pp. 577-589. 79. Mahfuz, H., Elton, K., Das, P., Vaidya, U. K. and Jeelani, S. "High Frequency Fatigue of Continuous Silicon Carbide Fiber Reinforced Silicon Nitride Matrix Composites," 29th International SAMPE Technical Conference, October 29 - Nov. 1, 1997, pp. 128-141. 80. Vaidya, U. K., Kamath, M., Mahfuz, H. and Jeelani, S. "Manufacturing and Low Velocity Impact Response of Innovative Sandwich Composites," 29th International SAMPE Technical Conference, October 29 - Nov. 1, 1997, pp. 713-724. 81. Vaidya, U. K., Abraham, A., Mahfuz, H. and Jeelani, S. "Manufacturing of Composite Integral Armor Using Liquid Molding Process," 29th International SAMPE Technical Conference, October 29 - Nov. 1, 1997, pp, 523-531. 82. Haque, A., Ali, M., Mahfuz, H. Jeelani, S. "Rate Dependent Compressive Response of S2-Glass/Vinylester Composites," 29th International SAMPE Technical Conference, October 29 - Nov. 1, 1997, pp. 698-712. 83. 83. Mahfuz, H., Lokesh, B., Das, P., Vaidya, U. K. and Jeelani, S. "Finite Element Modeling and Photo elastic Analysis of an Integral Armor under Flexural Loading," NCA-Vol. 24, Proceedings of the ASME Noise Control and Acoustic Division, ASME 97, pp. 235-246, 1997. 84. Mahfuz, H., Lokesh, B., Das, P., Vaidya, U. K. and Jeelani, S. “Experimental and Finite Element Hybrid Stress Analysis of Thick Section S2-Glass Composites”, 19th Southeastern Conference on Theoretical Applied Mechanics (SECTAM), May 3-5, 1997.Orlando, Florida. 85. Vaidya, U. K., Abraham, A., Hosur, M. V., Kumar, P., Haque, A., Mahfuz, H. and Jeelani, S. “ Manufacturing of Thick Section Composites Using Low- Cost Liquid Molding Processes”, 19th Southeastern Conference on Theoretical and Applied Mechanics (SECTAM), May 3-5, 1997, Orlando, FL., pp. 139-150. 86. Vaidya, U. K., Mahfuz, H., Jeelani, S. and Motuku, M. “Low Velocity Impact Response of Polymer Composites with Self-Healing Capability”, Alabama Materials Research Conference, October 25-26, 1997. 87. Vaidya, U. K., Kamath, M., Mahfuz, H. and Jeelani, S. “Low Velocity Impact Response of Unconventional Sandwich Composites”, Proceedings of the American Society of Composites, pp. 562-571, October 6-8, 1997, Dearborn, MI. 88. Krishnagopalan, J., Vaidya, U. K., Abraham, A., Murthy, C. R. L., Fotdar, K., Mahfuz, H. and Jeelani, S. “ Manufacturing of Composite Integral Armor Using a Cost Effective Resin Infusion Process”, American Institute of Chemical Engineers Meeting, Chicago, Il, September 1997. 89. Haque, A., Johnson, J., Vaidya, U. K. and Jeelani, S. “ Fatigue Damage in Glass/Vinyl Ester Thick Composites”, ASME International Congress of Mechanical Engineering and Exposition, Proceedings of the ASME Noise Control and Acoustic Division, NCA-Vol. 24, pp.247-258, 1997. 90. Haque, A., Vaidya, U. K., Ali, M., Fotedar. K., Mahfuz, H. and Jeelani, S. “Effect of Fiber Orientation on High Strain Rate Behavior of Glass/Epoxy Composites”, Engineering and Architecture Symposium, PVA&M, February 6-7, 1997, pp. 491- 34

498. 91. Haque, A., Johnson, J., Vaidya, U. K. and Jeelani, S. “Fatigue Damage in S2- Glagg/Vinyl Ester Thick Composites”, NCA-Vol. 24, ASME, 1997, pp.247-257. 92. Vaidya, U., Mahfuz, H., Jeelani, S. and Motuku. M. “Low Velocity of Impact Response of Polymer Composites with Self Healing Capability”, Alabama Materials Research Conference, Huntsville, Alabama, October 25-26, 1997. 93. Gajiwala, H., Vaidya, U. K., Sodah, S. and Jeelani, S. “Hybridized Resin Matrix Approach Applied to Development of Carbon/Carbon Composites”, 39th AIAA/ASME/ASCE/ASC Conference, Long Beach, CA, April 1998. 94. Vaidya, U. K., Mohan, P., Kamath, M. and Jeelani, S. “Low Velocity Impact Response of Sandwich Composites With Innovative Cores”, International Conference of Composites Engineering (ICCE-5), Las Vegas, Nevada, July 1998. 95. Vaidya, U. K., Abraham, A., Hosur, M. V., Kumar, P., Haque, A., Mahfuz, H. and Jeelani, S. "Manufacturing of Thick Section Composites Using Low Cost Liquid Molding Processes," 19th SECTAM Conference on Theoretical and Applied Mechanics, 1998, pp. 139-150. 96. Mahfuz, H., Lokesh, B., Vaidya, U. and Jeelani, S. “Experimental and Finite Element Hybrid Stress Analysis of Thick Section S2-Glass Composites”, Developments in Theoretical and Applied Mechanics, Vol. 9 (1998), pp. 117-128. 97. Mahfuz, H., Rahman, M., Das, P., Vaidya, U. K., and Jeelani, S. "Response of Composite Isogrid Cylinders under Axial Compression," 2nd International Conference on Composite Science and Technology (ICCST/2), June 9-11, 1998, Vol. 1, pp. 325-331. 98. Vaidya, U. K., Mohan, P., Hosur, M. V. and Jeelani, S. “Low Velocity Impact Response of Hybrid Sandwich Composites”, 30th International SAMPE Technical Conference, Vol. 30, pp. 96-104, San Antonio, TX. October 20-24, 1998. 99. Vaidya, U. K., Kumar, P., Hosur, M. V., Kamath, M. V., Mahfuz, H. and Jeelani, S. “Low Velocity and High Strain Rate Impact Response of Sandwich Composites”, Proceedings of the 30th International SAMPE Conference, October 20-24, 1998, San Antonio TX. 100. Mahfuz, H., Rahman, M., Haque, A., Fotedar, E., Vaidya, U. K. and Jeelani, S. “ Buckling Analysis of Composite Isogrid Cylinders Using Finite Element Method”, International Conference on Advanced Composites, Hurghuda, Egypt, December 1998, pp. 673-682 101. Motuku, M., Janowski, G., Vaidya, U. K., Mahfuz, H. and Jeelani, S. “Low Velocity Impact Response of Vinyl Ester 350 and C50 Neat Resins”, Proceedings of the ASME, NAC-Vol. 25, pp.283-296, 1998. 102. Vaidya, U. K., Kumar, P, Hosur, M. V.,Kamath, N. V., Mahfuz, H. and Jeelani, S. “ Low Velocity and High Strain Rate Impact of Pin Reinforced Foam Core Sandwich Composites”, Proceedings of the Japan-US Conference on Composite Materials, September 24-25, 1998, pp. 721-729, Baltimore, MD. 103. Hosur, M. V., Vaidya, U. K., Abraham, A. and Jeelani, S. "Effect of 3D Reinforcement on the Low-Velocity Impact Response of S2-Glass/Vinyl Ester Composite Laminates", ASME International Mechanical Engineering Congress and Exposition, NCA-Vol. 25, pp.303-308, Anaheim, California, November 15-20, 1998. 104. Hosur, M. V., Vaidya, U. K., Jadhav, N., Abraham, A. and Jeelani, S. “ Static and High Strain Rate Compression Testing of Thick Section S2 Glass/Vinyl Ester 35

Composites for Integral Armor Applications”, 1998 ASME International Mechanical Engineering Congress and Exposition, Materials Division Publication, pp.293-300, November 15-20, 1998, Anaheim, CA. 105. Hosur, M. V., Vaidya, U. K., Jadhav, N., Abraham, A and Jeelani, S. "Compression Behaviour of Glass/Vinyl Ester Composites for Integral Armor Application" IMECE-98, International Mechanical Engineering Congress and Exposition, Anaheim, California, November 15-20, 1998, USA 106. Vaidya, U. K., Hosur, M. V., Kumar, P., Earl, D., Cloyd, M., Mahfuz, H., Haque, A. and Jeelani, S. “ High Strain Rate Response of Sandwich Composites with Integrated PARABEAM Core”, International Conference on Advanced Composites, Hurghuda, Egypt, December 1998, pp. 215-226. 107. Mahfuz, H., Mamun, W., Haque, A., Vaidya, U. K. and Jeelani, S. "Response of Fiber and Matrix in Composites under High Strain Rate Loading," Proceedings of the SEM Annual Conference on Theoretical, experimental and Computational Mechanics, June 7-9, 1999, Vol. 1, pp. 559-564. 108. Haque, A., Rahman, M., Vaidya, U. K., Mahfuz, H. and Jeelani, S. “ Tensile Behavior of Woven Ceramic Matrix Composites at Room and Elevated Temperatures: An Experimental and Numerical Study”, Key Engineering Materials, Vols. 164-165, 1999, pp. 341-344, CSI Series- Publication of the Ceramic Society of Japan, Vol. 3. 109. Mahfuz, H., Zaman, K., Haque, A., Vaidya, U. K. and Jeelani, S. "S-N Characterization and Cyclic Life Prediction of Thick-Section Composites under Flexural Loading," Proceedings of the SEM Annual Conference on Theoretical, Experimental and Computational Mechanics, June 7-9, 1999, Vol. 1, pp. 630- 635. 110. Mahfuz, H., Zaman, K., Haque, A., Vaidya, U. K. and Jeelani, S. "Fatigue Life Prediction of Thick-Section Woven Composites Under Flexural Loading," 6th International Conference on Composites Engineering (ICCE - 6), June 27 - July 3, 1999, Orlando, Florida, Vol. 1, pp. 537-538. 111. Hosur, M. V., Vaidya, U. K., Gillespie, J. and Jeelani, S. "Ultrasonic Evaluation of Low-Velocity and Ballistic Impact Damage in S2-Glass Impact damage in S2- Glass/Vinyl Ester laminates", 26th Annual Review of Progress in Quantitative Nondestructive Evaluation, July 25-30, 1999 Montreal, Quebec, Canada 112. Vaidya, U. K., Jadhav, N., Hosur, M. V., Mahfuz, H. and Jeelani, S. "Parametric Dielectric Sensing Studies in Vacuum Assisted Resin Transfer Molding," 6th International Conference on Composites Engineering (ICCE-6), June 27-July 3, 1999, Orlando, Florida, Vol. 1, pp. 857-858. 113. Vaidya, U. K., Jadhav, N., Hosur, M. V., Haque, A. and Jeelani, S. “Influence of Specimen Thickness on the High Strain Rate Impact Response of VARTM Woven S2-Glass/Vinyl Ester Composites”, 6th International Conference on Composites Engineering (ICCE-6), June 27-July 3, 1999, Orlando, FL. 114. Vaidya, U. K., Abraham, A, Hosur, M. V. and Jeelani, S. “Manufacturing and Impact Response of S2-Glass/Epoxy Composites Produced by Low-Cost Vacuum Assisted RTM and Resin Liquid Infiltration”, 1st International SAMPE Automotive Conference, September 27-29, 1999, Detroit, MI. 115. Vaidya, U. K., Jadhav, N., Hosur, M. V., Haque, A., Mahfuz, H. and Jeelani, S. “High Strain Rate Impact Response of Infusible Neat Resins and VARTM S2-Glass Reinforced Fabric Composite”, 1999 SAMPE Technical Conference: Advanced 36

Materials and Processes Preparing for the New Millennium, Vol. 31, pp.89-100, Covina, CA. 116. Hosur, M. V., Vaidya, U. K., Jeelani, S. Jones, S., Eduljee, R. and Gillespie, J. “Activity Based Cost Modeling of Liquid Molding Processing Techniques for Thick Section Composites", American Society for Composites, 14th Technical Conference, September 27-29, 1999, Dayton, OH, pp. 968-977. 117. Mahfuz, H., Mamun, W., Hisham, M., Vaidya, U. K., Haque, A. and Jeelani, S. "High Strain Rate Response of resin Infusion Molded Sandwich Composites,"1999 ASME International Mechanical Engineering Congress and Exposition, Nashville, TN, AMD-Vol. 235, Thick Composites for Load Bearing Structures, pp. 105-112. 118. Haque, A., Rahman, M., Mahfuz, H., Vaidya, U. K. and Jeelani, S “ Durability and Damage Development in Woven Ceramic Matrix Composites Under Tensile and Fatigue Loading at Room and Elevated Temperatures”, MD-Vol. 86, Durability and Damage Tolerance of Composite Materials and Structures, 1999 ASME International Mechanical Engineering Congress and Exposition, Nashville, TN. 119. Vaidya, U. K., Hosur, M. V., Kumar, P., Mahfuz, H., Haque, A. and Jeelani, S. “Impact Damage Resistance of Innovative Functional Sandwich Composites”, Symposium on Recent Developments in the Study of Impacts on Composite Materials, ASME 1999 Mechanics and Materials Conference, Blacksburg VA, June 27-30, 1999. 120. Vaidya, U. K., Hosur, M. V., Haque, A., Mahfuz, H. and Jeelani, S. “Impact Response of Innovative Sandwich Composites in Low, Intermediate Velocity and High Strain Rate Scenarios”, International Conference on Composite Materials (ICCM-12), July 6-10, 1999, Paris, France. 121. Vaidya, U. K., Jadhav, N., Hosur, M. V., Mahfuz, H. and Jeelani, S. “High Strain Rate Response of Resins Used in Vacuum Assisted Resin Transfer Molding”, Proceedings of the International Conference on Composite Materials (ICCM2), Paris, France, July 5-9, 1999. 122. Vaidya, U. K., Jadhav, N. C., Hosur, M. V., Mahfuz, H., Mohammad, H. and Jeelani, S. “Parametric Dielectric Sensing Studies in Vaccum Assisted Resin Transfer Molding”, Proceedings of the International Conference on Composite Materials (ICCM-12), Paris, France, July 5-9, 1999. 123. Vaidya, U. K., Mohan, P. K., Hosur, M. V., Mahfuz, H., Haque, A. and Jeelani, S. “ Impact Response of Innovative Sandwich Composites in Low, Intermediate Velocity and High Strain Rate Scenarios”, Proceedings of the International Conference on Composite Materials (ICCM-12), Paris, France, July 5-9, 1999. 124. Mahfuz, H., Zaman, K., Hisham, M., Vaidya, U. K., Haque, A. and Jeelani, S. "Fatigue Modulus Concept and Life Prediction of Thick-Section S2- Glass/Vinylester Composites under Flexural Loading," ASME 1999, MD- Vol. 86, AMD-Vol. 232, Durability and Damage Tolerance of Composite Materials and Structures, pp. 101-106. ‘ 125. Hosur, M. V., Vaidya, U. K., Abraham, A., Basappa, G. and Jeelani, S. "Studies on the influence of through-thickness stitching on low-velocity and high strain response of S2-Glass/Vinyl Ester Composites", ASME International Mechanical Engineering Congress and Exposition, AM-9A,Nashville, Tennessee, November, 1999. 126. Hosur, M. V., Vaidya, U. K., Haque, A., Kulkarni, M., Kulkarni, R. and Jeelani, S, 37

"Evaluation of Ballistic Impact damage of Fiber Reinforced Plastic Laminates Bonded by Polycarbonate Face sheet" ASME International Mechanical Engineering Congress and Exposition, pp. 301-312, Nashville, Tennessee, November, 1999. 127. Mahfuz, H., Pal, A., Rahman, M. and Jeelani, S. "Failure Analysis of Thick Composite Rings Under Diametric Compression," 12th International Conference on Composite Materials (ICCM-12), Palais Des Congress, Paris, July 6-10, 1999. 128. Mahfuz, H., Rahman, M., Vaidya, U. K., Haque, A. and Jeelani, S. "Effect of Rib Geometry on the Buckling Behavior of Composite Isogrid Cylinders," 12th International Conference on Composite Materials (ICCM-12), Palais Des Congress, Paris, July 5-9, 1999. 129. Mahfuz, H., Zhu, Y., Haque, A. and Jeelani, S. "Response of Integral Armor under High Velocity Impact - An Experimental and Finite Element Study," 12th International Conference on Composite Materials (ICCM-12), Palais Des Congress, Paris, July 6-10, 1999. 130. Vaidya, U. K., Hosur, M. V., Earl, D., Cloyd, J. M., Rodgers, R. M. and Jeelani, S. “Impact Response of Integrated Hollow Core Sandwich Composite Panels”, 14th Technical Conference of American Society for Composites, September 27-29, 1999, Dayton, Ohio, PP. 404-413. 131. Hosur, M. V., Vaidya, U. K., Haque, A., Kulkarni, M, Kulkarni, R. and Jeelani, S. “Evaluation of Ballistic Impact Damage of Fiber Reinforced Plastic Laminates Bonded by Polycarbonate Face Sheets”, 1999 ASME Mechanical Engineering Congress and Exposition, Noise and Acoustic Division Publication NCA-Vol. 26, pp.301-312. Fairfield, NJ. 132. Vaidya, U. K., Kamath, M. V., Hosur, M. V., Haque, A. and Jeelani, S. “Low- Velocity and Compression After Impact Response of Pin-Reinforced Sandwich Composites”, 1999 ASME International Mechanical Engineering Congress and Exposition, Materials Division Publication, MD- Vol. 86, pp 89-100, Fairfield, NJ. Pp. 1-10. 133. Hosur, M.V., Vaidya, U. K., Abraham, A., Bassappa, G. and Jeelani, S. “Studies on the Influence of Through the Thickness Stitching on Low Velocity and High Strain Rate Response of S2-Glass/Vinyl Ester Composites”, 1999 ASME International Mechanical Engineering Congress and Exposition, Nashville, TN, November 1999. 134. Hosur, M. V., Vaidya, U. K., Abraham, A. and Jeelani, S. “Studies on the Influence of 3D Reinforcement of S2-Glass/Vinyl Ester Composites Under Low- Velocity Impact Fatigue Loading”, 20th Southeastern Conference on Theoretical and Applied Mechanics, (SECTAM-XX), Callaway Gardens, Pine Mountain, GA, USA, April 16-18, 2000. 135. Hosur, M. V., Vaidya, U. K., Alexander, J. and Jeelani, S. “High Strain Rate Response of Affordable Woven Graphite/Epoxy Composite Laminates,” 7th International Conference on Composites Engineering, ICCE/7, Denver, CO, USA July 2-8, 2000 136. Vaidya, U. K., Rogers, R., Hosur, M. V., Mahfuz, H. and Jeelani, S.” Influence of Face Sheet Thickness and Core Density on the Impact Response of Foam Core Sandwich Composites”, 20th Southeastern Conference on Theoretical and Applied Mechanics (SECTAM-XX), Calloway Gardens, GA, April 16-18, 2000. 137. Hosur, M. V., Vaidya, U. K., Abraham, A., Caroll, A. and Jeelani, S. "Comparison of Low-Velocity Impact Response of S2-Glass/SC-15 Epoxy Composites 38

Manufactured by Low-Cost VARIM And RIT Techniques", 15th annual Conference of American Society of Composites, College Station, TX, USA, Sept. 25-27, 2000. 138. Motuku, M., Vaidya, U. k., Janowski, G. M., Basappa, G. and Jeelani, S. “Effect of Impact Velocity and Impactor Mass on the Low Velocity Impact Response of Liquid Molded VE 350 Resin and Fiber Reinforced Plaques”, ASME/IMECE’2000, Symposium on CAE and Related Innovations for Polymer Processing, MD-Vol 90, pp. 117-138. 139. Motuku, M., Rogers, R., Jeelani, S. and Vaidya, U. K. “Effect of Foam Core Density and Face Sheet Thickness on the Low Velocity Impact Response of Foam Core Sandwich Composites”, ASME/IMECE’2000, Symposium on Vibration and Noise Control With Multi-Functional Materials, NCA-Vol.27. Pp.435-446. 140. Mahfuz, H, Zhu, Y., Mamun, W., Haque, A. and Jeelani, S. "Failure Analysis of Hybrid Armor Under High Velocity Impact," ASME 2000, AMD-Vol. 243, Dynamic Failure in Composite Materials and Structures, pp. 115-127. 141. Mahfuz, H., Islam, S., Carlsson, L., Atkins, M. and Jeelani, S. "Effect of Implanted Delamination and Core Density on the Buckling Behavior of Sandwich Composites," ASME 2000, AMD-Vol. 245, Mechanics of Sandwich Structures, pp. 143-150. 142. Mahfuz, H., Mamun, W. and Jeelani, S. "Effect of Core Density and Implanted Delamination in the High Strain Rate Response of Foam Core Sandwich Composites," Sandwich Construction 5, Volume 2, pp. 597-606, 2000. 143. Mahfuz, H., Mamun, W., Vaidya, U. K., Haque, A. and Jeelani, S. “Response of Foam-Core Sandwich Composites at High strain Rate," Developments in Theoretical and Applied Mechanics," Vol. 20, pp. 1-7, 2000. 144. Hosur, M. V., Alexander, J, Jeelani, S. and Vaidya, U. K. “High Strain Rate Compression Response of Carbon/Epoxy Laminate Composites,” ASME International Mechanical Engineering Congress and Exposition, Orlando, FL, November, 2000 145. Hosur, M. V., Karim, M. R., and Jeelani, S. “Influence of Stitching On The Low- Velocity Impact Response Of Woven S2-Glass/SC-15 Epoxy Composites” ASME International Mechanical Engineering Congress and Exposition, Orlando, FL, November 2000 146. Hosur, M. V., Alexander, J., Adya, M., Vaidya, U. K. and Jeelani, S. Impact Response of Affordable Graphite/Epoxy Woven Fabric Composites", 42nd AIAA/ASME/ASCE/ASC Structures, Structural Dynamics and Materials Conference, Seattle, WA, 16-19 April, 2001 147. Hosur, M. V., Adya, M., Vaidya, U. K., Mayer, A. and Jeelani, S “Characterization of Affordable stitched Plain Weave Carbon/Epoxy Composites Under Impact Loading”, Thirteenth International Conference on Composite Materials ( ICCM-13), June 25-29, 2001, Beijing China 148. Motuku, M., Vaidya, U. K., Rogers, R. and Jeelani, S. “Static Compression and High Strain Rate Impact Response of Foam Core Sandwich Composites”, International Conference on Composite Materials (ICCM-13), Paper ID-1569, Beijing, China, June 25-29, 2001. 149. Hosur, M. V., Alexander, J., Vaidya, U. K. and Jeelani, S. “Off-Axis High Strain Compression Response of Carbon/Epoxy Laminates”, Proceedings of the 16th Annual Technical Conference of the American Society for Composites, Blacksburg, VA, September 9-12, 2001 39

150. Hosur, M. V., Adya, U., Vaidya, U. K. and Jeelani, S. “Impact Resistance of Stitched Affordable Woven Carbon/Epoxy Composites”, ASME International Mechanical Engineering Congress and Exposition, New York, NY, November 2001. 151. Mahfuz, H., Mamun, W. and Jeelani, S. "Recent Advances in Understanding the Response of Composite Materials at Higher Rates of Strain," Keynote Paper, 4th International Conference on Mechanical Engineering (ICME 2001), Vol. 1., pp. 57-65. 152. Mahfuz, H., Muneeruzzaman, M., Zaman, K., Kulkarni, N. and Jeelani, S. “Response of Advanced Composites under Cyclic Loading; Recent Advances in Numerical and Experimental Approaches," Keynote Paper, BSME-ASME International Conference on Thermal Engineering, 2001, Vol. 1. pp. 120-132. 153. Kanny, K., Mahfuz, H., Thomas, T. and Jeelani, S. “Flexural Fatigue of PVC Foams”, 2001 ASME International Mechanical Engineering Congress, AMD-Vol. 248, pp. 39-49. 154. Thomas, T., Mahfuz, H., Kanny, K. and Jeelani, S. “High Strain Rate Response of PVC Foams”, 2001 ASME International Mechanical Engineering Congress, AMD- Vol.247, pp.93-101 155. Hosur, M. V., Karim, M. R. and Jeelani, S. “Studies on Stitched Woven S2 Glass/Epoxy Laminates Under Low and Ballistic Impact Loading”, Southeastern Conference on Theoretical and Applied Mechanics, (SECTAM XXI), May 19-21, 2002, Orlando, FL 156. Hosur, M. V., Alexander, J., Vaidya, U. K. and Jeelani, S “Characterization Of Affordable Satin Weave Carbon/Epoxy Laminate Composites Under Dynamic Compression Loading”, Southeastern Conference on Theoretical and Applied Mechanics (SECTAM XXI), May 19-21, 2002, Orlando, FL 157. Hossain, M. K., Haque, A., Mahfuz, H. and Jeelani, S., “Effects of Moisture and Temperature on High Strain Rate Behavior of S2-Glass/Vinyl Ester Woven Composite,” International Mechanical Engineering Congress and Exposition (ME2001). November 11-16, 2001, New York, New York. 158. Hosur, M. V., Adya, M., Vaidya. U. K. and Jeelani, S., “Response of Stitched Woven Carbon/Epoxy Composites under High Strain Rate Compression Loading,” SAMPE Technical Conference, Nov. 4-7, (2002), Baltimore, Maryland. 159. Majumdar, P., Mahfuz, H., Saha, M., Shamery, F. and Jeelani, S., “Innovative Manufacturing and Stability Analysis of Composite Skin-Stringer Assembly,” ASME Winter Annual Meeting, New Orleans, Louisiana, November (2002). 160. Mahfuz, H., Chakravarty, U., Saha, M. and Jeelani, S., "Microstructure, Density and Strain Rate Effects on Sandwich Core Materials," ASME Winter Annual Meeting, New Orleans, Louisiana, November (2002). 161. Mahfuz, H., Hasan, ABM, Saha, M. and Jeelani, S., "Failure Prediction of Flip Chip Packages using Finite Element Technique," ASME Winter Annual Meeting, New Orleans, Louisiana, November (2002), conference. 162. Hosur, M., Myers, D., Vaidya, U. K., and Jeelani, S., "Studies on the Repair of Ballistic Impact Damaged S2-Glass/Epoxy Laminates,” ASME International Mechanical Engineering Congress and Exposition, New Orleans, LA, November (2002). 163. Islam, M., Mahfuz, H., Motuku, M., Saha, M., and Jeelani, S, "Manufacturing and Analysis of 3-D Woven Sandwich Composites under Compressive Loading with 40

Acoustic Emission Monitoring," ASME Winter Annual Meeting, New Orleans, Louisiana, November (2002). 164. Hosur, M. V., Waliul Islam, S. M, Jeelani, S., Vaidya, U. K. and Dutta, P. "High Strain Compression Characterization of Graphite/Epoxy Composites at Room and Elevated Temperatures," ASME International Mechanical Engineering Congress and Exposition, New Orleans, LA, November (2002). 165. Hosur, M. V., Alexander, J., Vaidya, U. K., Mayer, A. and Jeelani, S. "On and Off- Axis High Strain Rate Compression Characterization of Affordable Woven Carbon/Epoxy Composites,” 17th Annual Technical Conference of the American Society for Composites, Purdue, IL, October 20-23, (2002). 166. Kanny, K., Mahfuz, H., Thomas, T., and Jeelani, S.," Static and Dynamic Characterization of Polymer Foams under Shear Loads," CD Proc. American Society for Composites 17th Annual Tech. Conf., West Lafayette, Indiana, 21-23 October (2002), Paper No. 2013. 167. Thomas, T., Mahfuz, H., Kanny, K., Jeelani, S., "High Strain Compression of Cellular Foam Core Sandwich Composites at Sub-ambient Temperatures,” CD Proc. American Society for Composites 17th Annual Tech. Conf., West Lafayette, Indiana, 21-23 October (2002), Paper No. 2012. 168. Majumdar, P., Mahfuz, H., Saha, M., Shamery, F., Jeelani, S., and Thomas, M .M. "Composite Skin-Stringer Assembly: Innovative Manufacturing and Stability Analysis." CD Proc. American Society for Composites 17th Annual Tech. Conf., West Lafayette, Indiana, 21-23 October (2002), Paper No.183. 169. Hosur, M. V., Karim, M. R. and Jeelani, S. "Studies on Stitched Woven S2 Glass/Epoxy Laminates Under Low and Ballistic Impact Loading,” Southeastern Conference on Theoretical and Applied Mechanics, (SECTAM XXI), May 19-21, (2002), Orlando, FL. 170. Hosur, M. V., Alexander, J., Vaidya, U. K. and Jeelani, S "Characterization of Affordable Satin Weave Carbon/Epoxy Laminate Composites Under Dynamic Compression Loading,” Southeastern Conference on Theoretical and Applied Mechanics (SECTAM XXI), May 19-21, (2002), Orlando, FL. 171. Kanny, K., Mahfuz, H., Thomas, T. and Jeelani, S. "Effects of Loading Frequency on the Fatigue Behavior of Sandwich Composites,” Developments in Theoretical and Applied Mechanics, Vol. 11(2002), pp. 285-294. 172. Kulkarni, N., Mahfuz, H., Carlsson, L. and Jeelani, S. "Flexural Fatigue Characterization of PVC Foam Core Sandwich Composites,” Developments in Theoretical and Applied Mechanics, Vol. 11(2002), pp.295-304. 173. Mahfuz, H., Ashfaq, A., Rangari, V., and Jeelani, S., "Characterization of Carbon Nanotube Reinforced Filaments and their Composites," 2003 ASME International Mechanical Engineering Congress and Exposition, Washington, DC, November 15- 21 (2003). 174. Hosur, M. V., Islam, W., Vaidya, U. K., Dutta, P. and Jeelani, S. "Dynamic Punch Shear Characterization of Woven Graphite/Epoxy Laminates,” ASME International Mechanical Engineering Congress and Exposition, Washington, D. C., November 15-21 (2003). 175. Hosur, M. V., Islam, W., Vaidya, U. K., Dutta, P. and Jeelani, S. "Evaluation of Dynamic Punch Shear Properties of Graphite/Epoxy Cross-Ply Laminates,” CD Proc. American Society for Composites, 18th Annual Tech. Conf., Gainesville, 41

Florida, October 19-22 (2003). 176. Mahfuz, H., Islam, M., Rangari, V. and Jeelani, S., "Processing Synthesis and Flexural Characterization of Nanophased Polyurethane Foams," American Society for Composites 18th Annual Tech. Conf., Gainesville, Florida, October 19-22 (2003), Paper 220. 177. Mahfuz, H., Saha, M., Chakravarty, U. and Jeelani, S., "Energy Absorption at Various Strain Rates by Sandwich Core Materials - Analytical and Experimental Investigation," American Society for Composites 18th Annual Tech. Conf., Gainesville, Florida, October 19-22 (2003), Paper 227. 178. Mahfuz, H., Ashfaq, A., Rangari, V., Jasiuk, I. and Jeelani, S., "Effects of Micron and Nanosized SiC Particles on the Mechanical Properties of Epoxy Nanocomposites," American Society for Composites 18th Annual Tech. Conf., Gainesville, Florida, October 19-22 (2003), Paper 238. 179. Gorenstein, N. Friedman, A., Mahfuz, H., Ashfaq, A., Rangari, V. and Jeelani, S., “Synthesis, Processing, and Mechanical Characterization of Epoxy-Protein Nanocomposites," American Society for Composites, 18th Annual Tech. Conf., Gainesville, Florida, October 19-22 (2003), Paper 240. 180. Saha, M., Mahfuz, H., Joarder, C. and Jeelani, S., "Finite Element Analysis of Integral Sandwich Tee Joints under Tension," 10th International Conference on Composites/Nano Engineering, New Orleans, Louisiana, July (2003). 181. Mahfuz, H., Adnan, A., Rangari, V. and Jeelani, S., "Carbon Nano-whisker Reinforced Composites: Manufacturing and Characterization," 2003 SEM Annual Conference on Experimental and Applied Mechanics, Charlotte, NC, preprint 199, June 2-4, (2003). 182. Hosur, M. V., Vaidya, U. K., Ulen, C., Mayer, A. and Jeelani, S. "Ballistic Impact Response of Woven Carbon/Epoxy Composites,” 48th International SAMPE Symposium, May 11-13(2003), Long Beach CA. 183. Kanny, K., Mahfuz, H., Thomas, T. and Jeelani, S.," Shear Fatigue Behavior of PVC Foams" 6th International Conference on Sandwich Constructions (ICSC6), Fort Lauderdale, Florida, Vol. 1, April (2003), pp. 513-521. 184. Mahfuz, H., Islam, S. and Jeelani S., "Flexural Response of Sandwich Composites with Nanophased Cores," 6th International Conference on Sandwich Constructions (ICSC6), Fort Lauderdale, Florida, Vol. 1, April (2003), pp. 213-226. 185. Thomas, T., Mahfuz, H., Kanny, K. and Jeelani, S., "Dynamic Compression of Foam Core Sandwich Composites," 6th International Conference on Sandwich Constructions (ICSC6), Fort Lauderdale, Florida, Vol. 1, April (2003), pp. 410-417. 186. Hosur, M. V., Adya, M, Dutta, P. and Jeelani, S. "High Strain Rate Response of Woven Graphite/Epoxy Composites at Elevated Temperatures,” 44th AIAA/ASME/ASCE/ASC Structures, Structural Dynamics and Materials Conference, Norfolk, VA, April (2003). 187. Salekeen, S., Rahman, M.M., Mahfuz, H., and Jeelani, S., "Long-term Creep and Creep Rupture Behavior of Woven Ceramic Matrix Composites at Elevated Temperatures," 2004 ASME International Mechanical Engineering Congress, Anaheim, California, November 13-19, (2004). 188. Hosur, M. V., John, M. K., Menon, A., Rangari, V. and Jeelani, S. "Studies on the Microwave Curing and Characterization of SC-15 Epoxy Reinforced with ZnO Nanoparticles,” 19th Annual Technical Conference of the American Society for 42

Composites, October 17-20(2004), Atlanta, GA. 189. Baseer, M.A. Mahfuz, H., Rangari, V. J., Zhou, Y., and Jeelani, S." Evaluation of Thermal and Mechanical Properties of Nanophased Carbon Prepregs," American Society for Composites 19th Annual Tech. Conf., Atlanta, Georgia, October 17-20 (2004), Paper NT-22. 190. Hosur, M. V., Abdullah, M. and Jeelani, S. "Fabrication and Low Velocity Impact Response of Innovative Foam Filled 3-D Integrated Core Sandwich Composites, 11th U. S. Japan Conference on Composite Materials, September 9-11 (2004), Yonezawa, Japan. 191. John, K. M., Hosur, M. V., Rangari, V. and Jeelani, S. "On the Processability of Nanophased Composites using Microwave,” 22 Southeastern Conference on Theoretical and Applied Mechanics, SECTAM XXII, August 17(2004), Tuskegee, Alabama. 192. Hasan M., Mahfuz, H., Rangari, V. and Jeelani, S., "Thermal and Mechanical Characterization of Nylon-6 Filaments Infused with Nanoparticles, Southeastern Conference on Theoretical and Applied SECTAM XXII, August 15-17(2004), Tuskegee, AL. 193. Hosur, M. V., Abdullah, M. and Jeelani, S. "Response of Hollow and Foam Filled Integrated Core Sandwich Composites under Low Velocity Impact Loading,” International Conference on Advances in Structural Integrity, July 14-17 (2004), Bangalore, India. 194. Hosur, M.V., Islam, W., Vaidya, U. K. and Jeelani, S. "Dynamic Response of Satin Weave Graphite Epoxy Composite under Punch Shear Loading at Room and Elevated Temperatures,” International Conference on Advances in Structural Integrity, July 14-17(2004), Bangalore, India. 195. Mahfuz, H., Uddin, M., Rangari, V., and Jeelani, S., “High Strain Rate Response of Sandwich Composites with Nanophased Cores," 2004 SEM X International Congress on Experimental and Applied Mechanics, Costa Mesa, California, June 7- 10(2004). 196. Hosur, M. V., Islam, W., Vaidya, U. K. and Jeelani, S. "Dynamic Punch Shear Characterization of Twill Weave Graphite/Epoxy Composites,” SAMPE 2004, Long Beach CA. 197. Uddin, M., Saha, M., Mahfuz, H., Rangari, V. and Jeelani, S., "Strain Rate effects on Nanophased Polyurethane Foams," SAMPE 2004, May 16-20 (2004), Long Beach, CA. 198. Salekeen, S., Nana, J., Mahfuz, H., and Jeelani, S., "Thermal Shock Behavior of Nicalon Fiber SiCN Ceramic Matrix Composites," SAMPE 2004, May 16-20 (2004), Long Beach, CA. 199. Mahfuz, H., Baseer, M., Rangari, V., and Jeelani, S., "Fabrication, Characterization and Mechanical Properties of Nanophased Carbon Prepreg Laminates,” SAMPE May 16-20 (2004), Long Beach, CA. 200. Hosur, M. V., Abdullah, M. and Jeelani, S. "Low Velocity Impact Characterization of Hollow Integrated Core Sandwich Composites,” SAMPE 2004, May 16-20, (2004), Long Beach, CA 201. Hosur, M.V., Chowdhury, F.H., and Jeelani, S., "Enhancement of Thermal and Mechanical Properties of Woven Carbon/Epoxy Composites through Nanoclay," International Conference on Computational and Experimental Engineering and 43

Sciences, ICCES'05, Chennai, India, December 1-6, 2005. 202. Robinson, D., Hosur, M., Mahfuz, H., Rangari, V. K., Jeelani, S., "Optimization of Ultrasonic Parameters & Manufacturing Process and Characterization of Nano- phased Low Density Polyurethane Form,” 2005 ASME International Mechanical Engineering Congress, Orlando, Florida, November 4-10, (2005). 203. Pervin, F.; Zhou, Y.; Rangari, V.K.; Jeelani, S.; "Evaluation of Thermal and Mechanical Properties of Carbon Nano Fiber Reinforced SC-15 epoxy,” 2005 ASME International Mechanical Engineering Congress, Orlando, Florida, November 4- 10, (2005). 204. Zhou, Y., Mao, P., Uddin M. F., Jeelani, S.; "High Strain rate Tensile Behavior of Carbon Fiber Reinforced Aluminum Laminates,” 2005 ASME International Mechanical Engineering Congress, Orlando, Florida, November 4-10, (2005). 205. Hosur, M., Mohammed, A., Jeelani, S., "Processing and Performance of Polyurethane/nanoclay Nanocomposite Foams,” 2005 ASME International Mechanical Engineering Congress, Orlando, Florida, November 4-10, (2005). 206. Zhou, Y.; Baseer, M. A.; Mahfuz, H., and Jeelani, S.; "Numerical Simulation on Tensile Failure process of Unidirectional Carbon Prepregs with Different Matrix,” Proceedings of the 20th Annual Technical Conference of the American Society for Composites, September 7-9, (2005), Philadelphia, PA. 207. Pervin, F.; Zhou, Y.; Biswas, M.A.; Rangari, V.K.; Jelanee, S.; "Fabrication and Characterization of Clay / Epoxy Nanocomposite,” CD Proceeding of 5th Annual Automotive Composites Conference and Exhibition, September 12-14, (2005), Tory, MI. 208. Zhou, Y.; Baseer, M. A.; Mahfuz, H.; Jeelani, S.; "Fabrication and Evaluation on Nano-Phased Unidirectional Carbon Fiber Reinforced Epoxy,” CD Proceeding of 5th Annual Automotive Composites Conference and Exhibition, September 12-14, (2005), Tory, MI. 209. Zhou, Y.; Rangari, V.; Mahfuz, H.; Jeelani, S.; Mallick, P.K.; "Thermal and Mechanical Behavior of Polypropylene, Talc-filled Polypropylene and Polypropylene Nanocomposites,” International SAMPE Symposium and Exhibition (Proceedings), v 50, SAMPE 05: New Horizons for Materials and Processing Technologies - Conference Proceedings, (2005), p 1655-1657, May 2005, Long Beach CA. 210. Zhou, Y.; Baseer, M. A.; Mahfuz, H.; Jeelani, S.; "Experimental Study on the Fatigue Strength Distribution of T700 Carbon Fiber,” International SAMPE Symposium and Exhibition (Proceedings), v 50, SAMPE 05: New Horizons for Materials and Processing Technologies - Conference Proceedings, 2005, p 1625-1634, May (2005), Long Beach CA. 211. Hosur, M. Mohammed, A., Jeelani, S. "Studies on the Synthesis and Characterization of Polyurethane/Nanoclay Nanocomposite Foams," 20th American Society for Composites Annual Technical Conference, September 7-9 (2005), Philadelphia, PA. 212. Hosur, M., Jain, K., Jeelani, S., "Studies On The Low-Velocity Impact Response Of Carbon/Epoxy Composites Subjected To Environmental Conditioning," SAMPE 2005 Conference, Long Beach CA May 1-5, (2005). 213. Saha, M.C., Nilufar, S., and Jeelani, S., "Studies on Processing and Characterization of Hollow Glass Microballoons Filled Composites," 2006 ASME International Mechanical Engineering Congress and Exposition, Chicago, Illinois, November 5- 44

10, 2006. 214. Saha, M.C., Kabir, M.E., and Jeelani, S., "Effect of Nanoparticles on Mode-I Fracture Toughness," 2006 ASME International Mechanical Engineering Congress and Exposition, Chicago, Illinois, November 5-10, 2006. 215. Hosur, M.V., Chowdhury, F.H., and Jeelani, S., "Processing and Low- Velocity Impact Performance of Nanophased Woven Carbon/Epoxy Composite Laminates," U.S Japan Conference on Composite Materials, Dearborn, Michigan, Sept. 20-22, 2006. 216. Robinson, D.C., Hosur M.V., and Jeelani, S., "Process Optimization and Characterization of Low Density Polyurethane Foam," Proceedings of the 21st Annual Technical Conference of the American Society for Composites, Dearborn, MI, Sept. 17-20, 2006. 217. Saha, M.C., Nilufar, S., and Jeelani, S., " Processing and Performance Evaluation of Syntactic Foams Infused with Nanoclay," 21st Annual Technical Conference of the American Society for Composites, Dearborn, MI, Sept. 17-20, 2006 218. Hosur, M.V., Chowdhury, F.H., and Jeelani, S., "Studies on Flexural and Thermal Response of Hand-layup Carbon/SC-15 Epoxy Composites," SEM Annual Conference & Exposition on Experimental and Applied Mechanics, St. Louis, Missouri, June 5- 7, 2006. 219. Saha, M.C., Kabir, M.E., and Jeelani, S., "Core/Skin Debond Fracture Toughness of S2-Glass/Epoxy Sandwich Composites with Nanophased Polyurethane Foam," SEM Annual Conference & Exposition on Experimental and Applied Mechanics, Saint Louis, Missouri, June 4-7, 2006. 220. Saha, M.C., Nilufar, S., and Jeelani, S., "Effect of Strain Rate on Compressive Behavior of Syntactic Foam," 2006 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, Saint Louis, Missouri, June 4-7, 2006. 221. Farhana, P., Zhou, Y., Rangari, V., and Jeelani, S., "Fracture and Fatigue behavior of carbon nano fiber reinforced epoxy,” Proceedings of the 2006 SEM Annual Conference and Exposition on Experimental and Appl i ed Mechanics. Saint Louis, Missouri, USA. June 4-7, 2006. 222. Hosur, M.V., Chowdhury, F.H., Mohammed A.A., and Jeelani, S., "Studies on the Processing and Performance of Nanocomposites for Structural Applications," 23rd Southeastern Conference in Theoretical and Applied Mechanics Mayagüez, Puerto Rico, May 21 - 23, 2006. 223. Saha, M.C., Nilufar, S., and Jeelani, S., "Manufacturing and Characterization of Hollow Spheres Filled Epoxy Composites," Twenty Second Southeastern Conference on Theoretical and Applied Mechanics, Puerto Rico, May 21-23, 2006. 224. Chowdhury, F.H., Hosur, M.V., and Jeelani, S., "Fabrication and Characterization of Plain Weave Carbon/Nanoclay-Epoxy Composites," SAMPE 2006, April 30-May 4, 2006, Long Beach, CA. 225. Farhana, F., Zhou, Y., Rangari, V., Jeelani, S.; "Fabrication and characterization of carbon-CNF-epoxy nanocomposite,” SAMPE 2006, April 30-May 4 2006, Long Beach CA. 226. Hasan M. M.; Zhou, Y., Mahfuz, H., and Jeelani, S.; "Effect of SiO2 nano- particle on tensile behavior of Nylon 6 at different strain rate,” SAMPE 2006, April 30-May 4 2006, Long Beach CA. 227. Rangari, V., Fredrick Baker, Tarig A. Hassan and Shaik Jeelani, “Thermal and 45

Mechanical Properties of SiC/SiO2 Epoxy Nanocomposite,” CANCOM-2007, Winnipeg, Canada. 228. Rangari, V., Tarig A. Hassan, Quentin Mayo and Shaik Jeelani, “Effect of ultrasound on tungsten oxide nanoparticles and its applications in epoxy nanocomposites,” ICCM-16-2007, Kyoto, Japan. 229. Rangari, V., M.Yousuf and Shaik Jeelani, “Filament extrusion process, thermal and mechanical characterization of nylon6-and Silicon carbide coated Silicon nitride nanoparticle,” Proceedings of International and INCCOM-6 Conference Future Trends in Composite Materials and Processing, December 12-14, 2007, Indian Institute of Technology Kanpur, India. 230. Mahesh V. Hosur, Orion Gebremedhin, Shaik Jeelani, “Processing and Performance Evaluation of Epon 828,” CD Proceedings of the ASME International Mechanical Engineering Congress and Exposition, 11-15 November 2007, Seattle, WA. 231. Sandrea B. Young, Merlin Theodore, Mahesh V. Hosur, Shaik Jeelani “Characterization of Amine Functionalized Multi-Walled Carbon Nanotubes Epoxy- Based Nanocomposites,” CD Proceedings of the SAMPE Fall Meeting, October 29- November 1, 2007,Cincinnati, OH. 232. Wanda D. Jones, Rangari, V., and Shaik Jeelani, “Mechanical and Thermal Properties of Epoxy based Composites with POSS modified Carbon Nanotubes,” SAMPE- Oct 29-1 Nov. 2007. 233. Jessie Mayo B. Jr., Mahesh V. Hosur, Shaik Jeelani “Dynamic and Quasi- Static Stab Resistance of Thermoplastic and Silica-Polyethylene Glycol Gel Infused Fabrics,” CD Proceedings of the 22nd Annual Technical Conference of the American Society for Composites, September 17–19, 2007, Seattle, WA. 234. Rodgers, R., Mahfuz, H., Rangari, V., Jeelani, S., Carlsson, L, “Tensile Response of SiC-Nanoparticles Reinforced Epoxy Composites at Room and Elevated Temperatures,” 16th Intl. Conference on Composite Materials (ICCM-16), Kyoto, Japan, July 8-13, 2007, Paper presented and published in the CD Proceeding.. 235. 245.Dangale C. Robinson, Mahesh V. Hosur, Shaik Jeelani, “Process Optimization and Characterization of Low Density Polyurethane Foam,” CD Proceedings of the 16th International Conference on Composite Materials, July 8-13, 2007, Kyoto, Japan. 236. Merlin Theodore, Mahesh Hosur, Jonathan Thomas, Shaik Jeelani “Characterization of Epon 862 Reinforced With Functionalized MCNT's,” CD Proceedings of the 16th International Conference on Composite Materials, July 8-13, 2007, Kyoto, Japan. 237. Mahesh V. Hosur, Aleem A. Mohammed, Shaik Jeelani, “Impact Response of Nanophased Polyurethane Foam Core Sandwich Composites,” CD Proceedings of the 16th International Conference on Composite Materials, July 8-13, 2007, Kyoto, Japan. 238. M. V. Hosur, J. B. Mayo Jr., E. Wetzel, and S. Jeelani, “Studies on the Fabrication and Stab Resistance Characterization of Novel Thermoplastic- Kevlar Composites,” CD Proceedings of the International Conference on Materials for Advanced Technologies- ICMAT-2007, July 1-6, 2007, Singapore. 239. 249.O. Gebremedhin, M. V. Hosur, J. Thomas, S. Jeelani, “Processing and Performance of Nanoclay infused EPON-828,” CD Proceedings of the SAMPE 2007, June 4-8, 2007, Baltimore, MD. 240. Wanda D. Jones, Rangari, V., and Shaik Jeelani, “Decoration of carbon nanotubes 46

with magnetite nanoparticles and its applications in polymer composites,” SAMPE- 2007, Baltimore, June 7. 241. M. Theodore, M. V. Hosur, J. Thomas, S. Jeelani, “Effect of functionalization on the properties of multi-walled carbon nanotubes,” CD Proceedings of the SAMPE 2007, June 4-8, 2007, Baltimore, MD. 242. Rangari, V., Tarig A. Hassan and Shaik Jeelani, “Synthesis and Characterization of Shear Thickening Fluid for Body Armor Applications,” SAMPE-2007, Baltimore, June 7. 243. Vijaya K. Rangari, Tarig A. Hassan, Clifton Mayo and Shaik Jeelani, “Titanium Carbide Infused Phenolic Balsa Foam Nanocomposite,” Plasticity 2007: Alyeska (Alaska), June 2-6, 2007. 244. M. Theodore, M. V. Hosur, J. Thomas, and S. Jeelani, “Processing and Characterization of Epon 862 reinforced with functionalized MWCNT’s,” 2007 NIST Nanotechnology Conference and Trade Show, May 20-24, 2007, Santa Clara, California, U.S.A. 245. Yuanxin Zhou, Everett White, Shaik Jeelani, “Effect of particle size on the mechanical properties of polymer matrix nanocomposite,” Nanotech 2007, Santa Clara, CA, USA, May 22, 2007 246. Yuanxin Zhou, Sajedur Rahman Akanda, Shaik Jeelani, “Nonlinear constitutive equation for vapor-grown carbon nanofiber-reinforced SC-15 epoxy at different strain rate,” ANTECH 2007, Cincinnati, OH, USA, May 8, 2007 247. J. Mayo, M. V. Hosur, E. Wetzel, S. Jeelani, “Resistance of Novel Thermoplastic- Kevlar Composites to Spike Penetration,” 2nd International Conference on recent advanced in composite materials, Feb. 20-23, 2007, New-Delhi, India. 248. M. V. Hosur, A. A. Mohammed, S. Jeelani, “Impact Response of the Nanophased Foam Core Sandwich Composites,” 2nd International Conference on recent advanced in composite materials, Feb. 20-23, 2007, New-Delhi, India. 249. M. V. Hosur, S. Krishnamoorthy, S. Jeelani, “Processing and Mechanical Performance of Woven Fabric Carbon/Polyimide Composites,” 2nd International Conference on recent advanced in composite materials, Feb. 20- 23, 2007, New- Delhi, India. 250. M. V. Hosur, F. H. Chowdhury, S. Jeelani, “Impact Performance of Nanophased Woven Fabric Carbon/Epoxy Composite Laminates,” International Conference on Computational and Experimental Engineering and Sciences, ICCES’07, January 3- 8, 2007, Miami, FL. 251. Mahesh Hosur, Merlin Theodore, Shaik Jeelani, “Effect of Functionalization on the Morphology, Cure Kinetics and Mechanical Behavior of Thermosetting Polymers,” Proceedings of the IUTAM-MMSS2008 Symposium on Multifunctional Materials, Structures and Systems, December 10-12, 2008, Bangalore, India. 252. Mahesh V. Hosur, Md. Mazedul Islam, Shaik Jeelani, “Processing and Performance of Nanophased Braided Carbon/Epoxy Composites,” Proceedings of the 2nd International Symposium on Advanced Materials and Polymers for Aerospace and Defense Applications (SAMPADA-2008), December 8-12, 2008, Pune, India. 253. Rangari, V., Mohmmad S. Bhuyan and Shaik eelani, “Microwave processing and charactering of Epoxy 862/CNT nanocomposites,” SAMPADA-2008, Dec 8-12, University of Pune, India 254. Rangari, V., M. Yousuf, M. Ghouse and Shaik Jeelani, “Thermal and mechanical 47

characterization of polymer nanocomposites of Si3N4/ Polypropylene fibers,” ISAMPE National Conference on Composites : INCCOM-7, National Aerospace Laboratories, Bangalore-17 (NAL’s Golden Jubilee Year 2008) 255. Mahesh V. Hosur, Tamanna Rahman, Sandrea Brundidge-Young, and Shaik Jeelani, “Mechanical and Thermal Properties of Amine Functionalized Multi- walled Carbon Nanotubes Epoxy Based Nanocomposite,” Proceedings of the Second International Conference on Polymer Blends, Composites, IPNs, Membranes, Poly Electrolytes and Gels, Macro to Nano Scales (ICBC-2008), September 22-24, 2008, Kottayam, Kerala, India. 256. Mahfuz, H. and Khan, M., “Synthesis and Characterization of Low Density Polyethylene (LDPE) Reinforced with Functionalized CNTs,” ASME International Mechanical Engineering Congress and Exposition, October 31 – November 6, 2008, Boston, Massachusetts, Presented and published in the Conference Proceedings. 257. Md. A. Bhuiyan, Mahesh Hosur, Yaseen Farooq, Shaik Jeelani, “Mechanical and Thermal Properties of Carbon-Nanofiber Infused Polyurethane Foam,” ASME IMECE, Nov. 2008, Boston, MA. 258. Mary E. Moore, Mahesh Hosur, Adriane G. Ludwick, and Shaik Jeelani, “Preparation and Characterization of Layered Silicate Nanocomposites Based on Resole Phenolic Resins and Brominated Resole Phenolic Copolymer Resins,” CD Proceedings of the Annual technical Conference of American Society for Composites, Sept. 9-11, 2008, Memphis, TN. 259. S. Zainuddin, M. V. Hosur, Y. Zhou, Ashok Kumar and S. Jeelani, “Characterization of neat and nanophased epoxy polymers subjected to accelerated aging conditions,” CD Proceedings of the Annual technical Conference of American Society for Composites, Sept. 9-11, 2008, Memphis, TN. 260. Tiffany Nelson, Mahesh Hosur, John LaScala, Shaik Jeelani, “Synthesis and Characterization of Modified Soybean Oil and Methacrylated Fatty Acid Derived Resins for Sheet Molding Compounds,” CD Proceedings of the Annual technical Conference of American Society for Composites, Sept. 9-11, 2008, Memphis, TN. 261. S. Zainuddin, M. V. Hosur, Y. Zhou, Ashok Kumar and S. Jeelani, “Durability Study of Neat/ Nanophased GFRP Composites Under Different Environmental Conditioning,” CD Proceedings of the Annual technical Conference of American Society for Composites, Sept. 9-11, 2008, Memphis, TN. 262. B. Dey, Yuanxin Zhou, Mahesh Hosur, Shaik Jeelani, Ashok Kumar, L. D. Stephenson, “Evaluation of Thermal Effects on Mechanical Properties of Epoxy, Carbon Fiber and Carbon/epoxy Composite,” CD Proceedings of the Annual technical Conference of American Society for Composites, Sept. 9-11, 2008, Memphis, TN. 263. Dangale C. Robinson, Mahesh V. Hosur, Shaik Jeelani, “Processing and Performance of Nanoclay Infused Low Density Polyurethane Foams,” CD Proceedings of the Fall Meeting of the Society for Advancement of Materials and Process Engineering (SAMPE), Sept. 9-11, 2008, Memphis, TN. 264. Harish M Rao, Jessie Mayo. Jr., Mahesh V. Hosur, and Shaik Jeelani, “Stab Characterization of Ballistic Fabrics Impregnated With Shear Thickening Fluid,” CD Proceedings of the Fall Meeting of the Society for Advancement of Materials and Process Engineering (SAMPE), Sept. 9-11, 2008, Memphis, TN. 265. Rangari, V., Ghouse, M. Mohammal , Shaik Jeelani, Komal Vig, Seyhan Boyoglu, 48

Shree Ram Singh, and Shreekumar Pillai, “Synthesis of Nylon/CNT/Ag fiber for antimicrobial textile applications,” Force Health Protection - Prevention is the Key, 11th Annual Force Health Protection Conference, Albuquerque Convention Center Albuquerque, New Mexico 9 - 15 August 2008. 266. Rangari, V., M. Y. Shaik, and S. Jeelani, “Characterization of nanocomposite materials using electron microscopy,” Microscopy & Microanalysis 2008 Meeting, August 3-7, 2008, Albuquerque Convention Center, Albuquerque, New Mexico 267. W.D. Jones, V. Rangari, S. Jeelani, “Thermal and Mechanical Response of POSS coated Nanophased expandable foam core materials,” NSTI, Nanotech June 1-5, Boston-2008, 268. Rangari, V., S. Dey, S. Jeelani, “In-situ synthesis of Cu nanoparticles on MWCNTS using Microwave irradiation,” NSTI, Nanotech June 1-5, Boston-2008, 269. N. Wright Bolden, V. Rangari, S. Jeelani, “Synthesis of magnetic nanoparticles and its applications in drug delivery systems,” NSTI, Nanotech June 1-5, Boston- 2008, 270. Rangari, V., G. M. Mohammad, S. Jeelani, “Fabrication of Nylon nanocomposite fibers for Antimicrobial Textile applications,” The 2nd International Conference on Heterogeneous Materials Mechanics (ICHMM-2008) June 3-8, 2008 Huangshan, China 271. Mahesh Hosur, Farhan Chowdhury, Orion Gebremedhin, Shaik Jeelani, “Recent Advanced on the Effect of Nanoclay on the Properties of Epoxies and Fiber Reinforced Polymer Composites,” Second International Conference on Heterogeneous Materials Mechanics, June 5, 2008, Huangshan, China. 272. Rangari, V., Tarig A. Hassan and Shaik Jeelani, “Synthesis and Mechanical Properties of Shear Thickening Fluid/Kevlar Composite for Body Armor Application,” SAMPE '08 Long Beach, Material and Process Innovations: Changing our World, May 16-21, 2008 273. Y. X. Zhou, B. Dey, M.V. Hosur, S. Jeelani, A. Kumar, and L. D. Stephenson, “Effect of degraded Matrix on the Tensile Failure Process of Unidirectional Carbon Fiber Reinforced Epoxy,” Proceedings of the International Conference of Computational and Experimental Engineering and Sciences, ICCES’08, March 15-21, 2008, Honolulu, HI. 274. M. V. Hosur, M. M. Islam, S. Jeelani, “Low-Velocity Impact of Braided Carbon/Epoxy Composites,” Proceedings of the International Conference of Computational and Experimental Engineering and Sciences, ICCES’08, March 15-21, 2008, Honolulu, HI. 275. Mohammad Kamal Hossain, Muhammad Enayet Hossain, Mahesh Hosur and Shaik Jeelani, “Mechanical and Thermal Characterization of CNF-Filled Polyester Nanophased Composite,” International Conference of Mechanical Engineering, Dakha, Bangladesh, December 26-28, 2009. 276. M. K. Hossain, M. E. Hossain, M. Hosur and S. Jeelani, “Comparison of Static and Dynamic Behavior of Nanophased Glass Polyester Composite,” ASME International Mechanical Engineering Congress and Exposition 2009, November 13- 19, 2009, Lake Buena Vista, Florida. 277. Gregory Strawder, Mahesh Hosur, Jeelani, and Yuanxin Zhou, “Thermal and Mechanical Studies of Wood Flour Reinforced Polyurethane Composites,” ASMPE 49

Fall Meeting, Wichita, Kansas, October 19-21, 2009. 278. Dangale C. Robinson Meda, Mahesh V. Hosur, and Shaik Jeelani, “Process Optimization and Characterization of Nanoclay Infused Polyurethane Foam,” The 1st joint American- Canadian International Conference on Composites September 17, 2009. 279. Yuanxin Zhou, M S. Shaik, Shaik Jeelani, Thomas E. Lacy, “Fabrication and Characterization of Vapor Grown Carbon Nanofiber Reinforced Polyester,” American Society for Composites 2009 Annual Technical Conference, Newark, DE, USA, September 15, 2009. 280. Mohammad K. Hossain, Muhammad E. Hossain, Mahesh Hosur, and Shaik Jeelani, “Comparison of Low Velocity Impact Behavior of Conventional Glass‐Polyester and CNF‐Filled Glass Polyester Nanophased Composites,” The 1st joint American- Canadian International Conference on Composites September 16, 2009. 281. S. Zainuddin, M. V. Hosur, R. Barua, and A. V. Anafo, Ashok Kumar and S. Jeelani, “Effects of Ultraviolet Radiation and Condensation on Static and High Strain Rate Behavior of Nanophased Glass/ Epoxy Composites,” The 1st joint American- Canadian International Conference on Composites September 16, 2009. 282. Jessie B. Mayo, Mahesh V. Hosur, and Shaik Jeelani, Eric D. Wetzel “Cut Behavior of High Performance Fibers,” The 1st joint American- Canadian International Conference on Composites September 17, 2009. 283. Yuanxin Zhou, M.S. Shaik, Shaik Jeelani, Thomas Lacy, Mark F. Horstemeyer, “Experimental Study on Thermal and Mechanical Properties of Clay Modified Carbon Fiber Reinforced epoxy,” American Society for Composites 2008 Annual Technical Conference, Memphis, TN, USA, September 11, 2008. 284. S. Akanda, Yuanxin Zhou, Shaik Jeelani, “Effect of Structure on Electrical conductance of Single Wall Carbon Nanotubes,” American Society for Composites 2008 Annual Technical Conference, Memphis, TN, USA, September 11, 2008. 285. N Wright Bolden, V. Rangari, S. Jeelani, “Synthesis of drug loaded iron oxide nanoparticles,” ICCM-17 17th International Conference on Composite Materials, 27 Jul 2009 - 31 Jul 2009, Edinburgh International Convention Centre (EICC), Edinburgh, UK 286. T. Nelson, M. V. Hosur, S. Jeelani, “Development of Bio-Based, Hazardous Air Pollutant Free Sheet Molding Compounds,” International Conference on Composite Materials, ICCM-17, Edinburgh, UK, July 30, 2009. 287. M. V. Hosur, Md. A Bhuiyan, S. Jeelani, “Low-Velocity Impact Response of Sandwich Composites with Nanophased Core,” International Conference on Composite Materials, ICCM-17, Edinburgh, UK, July 27, 2009. 288. Rangari, V., Mohammad S. Bhuyan, Shaik Jeelani, “Synthesis, Comparative Study of Thermal and Microwave cured Epon862/CNFs Nanocomposites,” ICCM-17 17th h International Conference on Composite Materials 27 Jul 2009 - 31 Jul 2009, Edinburgh, International, Convention Centre (EICC), Edinburgh, UK 289. S. Zainuddin, M. V. Hosur, A. Kumar, S. Jeelani, “Durability Studies of Nanophased FRP Composites under synergistic exposure conditions,” International Conference on Composite Materials, ICCM-17, Edinburgh, UK, July 27, 2009. 290. M. V. Hosur, Md. A. Bhuiyan, S. Jeelani, “Impact Response of Nanophased Foam Core/Braided Face Sheet Sandwich Composites,” 2009 Annual Society for 50

Experimental Mechanics Conference, Albuquerque, NM, June 1-4, 2009. 291. H. Rao, M. V. Hosur, J. Mayo, S. Burton, S. Jeelani, “Stab Characterization of Hybrid Ballistic Fabrics,” 2009 Annual Society for Experimental Mechanics Conference, Albuquerque, NM, June 1-4, 2009. 292. S. Zainuddin, M. V. Hosur, A. Tcherbi-Narteh, Ashok Kumar and S. Jeelani, “Dynamic Compression Response of Nanophased Composites Subjected to UV Radiation,” 2009 Annual Society for Experimental Mechanics Conference, Albuquerque, NM, June 1-4, 2009. 293. T. Nelson, M. Hosur, S. Jeelani, A. Netravali, “Physical and Mechanical Characterization of Alkali Treated Kenaf Fibers,” SAMPE 2009 Conference, Baltimore, MD, May 2009. 294. V. Rangari, G. M. Mohammad, S. Jeelani, Y. U.Butenko, V. R. Dhanak, “Fabrication of Nylon Nano Diamond Coated MWCNT Composite Fibers,” SAMPE ’09 Conference and Exhibition, Baltimore, Maryland, May 18-21, 2009 295. V. Rangari, T. A. Hassan, V. K. Rangari, S. Jeelani, “Synthesis and Characterization of Calcium Carbonate Nanoparticles Derived from Eggshell,” SAMPE ’09 Conference and Exhibition, Baltimore, Maryland, May 18-21, 2009 296. N. W. Bolden, V. K. Rangari, S. Jeelani, “Synthesis and Characterization of Drug coated Magnetic Nanoparticles,” SAMPE ’09 Conference and Exhibition, Baltimore, Maryland, May 18-21, 2009 297. L. Adiani, P. Subbarayan, S.Boyoglu, K. Vig, S. Pillai, V. Rangari, S.R. Singh, “Silver Coated Carbon Nanotubes Inhibit RSV Infection,” Nanotech Conference & Expo, George R.Brown Convention Center, May 3-7, 2009, Houston, TX. 298. .K. Vig, S. Boyoglu, V. Rangari, S. Pillai, S.R. Singh, “Respiratory Syncytial Virus Inhibition by Gold and Titanium Nanoparticles,” Nanotech Conference & Expo, George R.Brown Convention Center, May 3-7, 2009, Houston, TX 299. D. Ashour, P. Subbarayan, L. Adiani, S. Boyoglu, G. Mohammad, V. Rangari, S. Jeelani, S. Ram Singh, S. Pillai, “Antimicrobial properties of silver coated CNT,” Nanotech Conference & Expo, George R.Brown Convention Center, May 3-7, 2009, Houston, TX, 300. T.A. Hassan, Rangari, V., S. Jeelani, “Synthesis and Characterization of Calcium Silicate via mechanochemical and Sonochemical method,” Nanotech Conference & Expo, George R.Brown Convention Center, May 3-7, 2009, Houston, TX, 301. M. E. Moore, M. Hosur, S. Jeelani, “Effect of Bromine Position on the Thermal Properties of Brominated Resole Phenolic Resins,” SAMPE 2009 Conference, Baltimore, MD, May 2009. 302. Yuanxin Zhou, Sajedur Akanda, Mahesh Hosur, Shaik Jeelani, “Atom Scale Simulation of Contact Resistance between Two Single-Walled Carbon Nanotubes,” SAMPE 2009 Conference, Baltimore, MD, May 2009. 303. Mahesh V. Hosur, Md. Mazedul Islam, Aziz Ahmed, Shaik Jeelani, “Low Velocity and High Strain rate Compression Response of Braided Carbon/Epoxy Composites,” SAMPE 2009 Conference, Baltimore, MD, May 2009. 304. J. Mayo, Jr., A. Lewis, M. V. Hosur, S. Jeelani, “Cut Studies of Brittle and Ductile Fibers,” SAMPE 2009 Conference, Baltimore, MD, May 2009. 305. M. E. Moore, M. V. Hosur, A. G. Ludwick, and S. Jeelani, “Effect of Bromine Substitution and Position on the Thermal Stability and Thermal decomposition Kinetics of Brominated Resole Phenolic Resins,” American Chemical Society 51

Conference 2009, Salt Lake City, UT, March 2009 306. Rangari, V., Mohmmad S. Bhuyan and Shaik Jeelani, “Synthesis, Thermal and Mechanical characterization of Microwave cured Epoxy/CNTs nanocomposites,” ICCST/7 –Seventh International Conference on Composite Science and Technology Jan, 20-22, 2009 - SHARJAH, UNITED ARAB EMIRATES 307. Rangari, V., Sanchita Dey and Shaik Jeelani, Decoration of Ag-Cu nanoparticles on Multiwalled carbon nanotubes and their applications in polymer composites, MRS, Spring, April 5-9, 2010, San Francisco, CA. 308. Tarig Hassan, Vijaya K Ragnari and Shaik Jeelani, Synthesis, Fabrication, Thermal and Mechanical Characterization of Eggshell Based Bio- Nanocomposites,, Gordon Research Conference – Composites, January,17-22, 2010, Ventura, CA 309. N. Wright Bolden, Rangari, V., S. Jeelani, S. Boyoglu, J. Babu, Synthesis, Characterization and analysis of iron oxide –paclitaxel microspheres,, Gordon Research Conference – Composites, January,17-22, 2010, Ventura, CA. 310. Rangari, V., M. Ghouse and Shaik Jeelani, Fabrication and characterization of high strength nanocomposite single fibers for multifunctional applications., INDO- US WORKSHOP ON NANOTECHNOLOGY: APPLICATIONS AND IMPLICATIONS, Indian Institute of Chemical Technology, Hyderabad November 10-12, 2009 311. Tarig Hassan, Ragnari, V., and Shaik Jeelani, Sonochemical Synthesis and Characterization of Bio-Based Hydroxyapatite Nanoparticles, MRS Fall Meeting, Nov 30-Dec 4, 2009, Boston, MA 312. Rangari, V., M. Ghouse, Shaik Jeelani, Fabrication and Characterization of High Strength Antimicrobial Nanocomposite Fibers, ASME International Mechanical Engineering Congress & Exposition, Nov 13-19, 2009, Lake Buena Visa, FL’ 313. Rangari, V., Rahman Samsur, Shaik Jeelani, Growth mechanism of MWCNTs using nanoparticles as catalysts Joint Canadian-American Society for Composites, Twenty-fourth Technical Conference, Sept 15-17 2009, University of Delaware, Delaware 314. Ragnari, V., and Shaik Jeelani, Synthesis of Bio Calcium Carbonate Nanoparticles by Size Reduction of Eggshell, Tarig Hassan, , MRS Spring Meeting,April,13- 17,2009, San Francisco, CA 315. Sirajus Salekeen, M.G.Kibria Khan, Mahesh Hosur, and Shaik Jeelani, “Ballistic Properties for Nano-Infused Epoxy Composite/Ceramic Armor,” International Conference on Composites Science and Technology, Sharjah, UAE, Jan 21, 2009. 316. Mahesh Hosur and Shaik Jeelani, “Polymer Matrix/MWCNT Nanocomposites: Challenges and Opportunities as Materials for Structural Applications,” “Carbon Nanotechnology: Potential and Challenges,” with a theme of “Innovations in Carbon Nanotechnology for the New Century,” 15-17 December 2010, Kanpur, India (invited). 317. M. K. Hossain, M. W. Dewan, M. Hosur and S. Jeelani, “Thermal and Mechanical Characterization of Jute-Biopol Nanophased Green Composites,” MRS Fall Meeting 2010, Boston, MA, November 29-December 03, 2010. 318. 330.M. K. Hossain, M. E. Hossain, M. Hosur and S. Jeelani, “Study of Mechanical Responses and Thermal Expansion of CNF-modified Polyester Nanocomposites Processed by Different Mixing Systems,” MRS Fall Meeting 2010 Boston, MA, November 29-December 03, 2010. 52

319. Mohammad K Hossain, Kazi Al Imran, Mahesh Hosur and Shaik Jeelani, “Effect of Seawater on Thermal Behavior of Conventional and Nanophased Carbon/Epoxy Composites,” MRS Fall Meeting 2010Boston, MA, November 29-December 03, 2010 320. Alfred Tcherbi-Narteh, Mahesh Hosur, Shaik Zainuddin, Shaik Jeelani, “Static and High Strain Rate Compression Response of Carbon/Epoxy- Nanoclay Composites Subjected to Synergistic Effect of UV Radiation and Condensation,” 7th Asian Australasian Conference on Composite Materials, ACCM-7, 15-18 November, 2010, Taipei, Taiwan. 321. Shaik Zainuddin, Mahesh Hosur, Harish Rao, Rajib Barua, Shaik Jeelani, Ashok Kumar, Jonathan Trovillion, “Influence of Non-Functionalized and Functionalized MWCNTs on Mechanical and Thermal Properties of Epoxy Composites,” International Mechanical Engineering Congress and Exposition, IMECE 2010, November 12-18, Vancouver, Canada. 322. M. K. Hossain, M. W. Dewan, M. Hosur and S. Jeelani, “Interfacial Improvement of Nanopahsed Jute-Based Green Composite by Surface Modification,” ASME International Mechanical Engineering Congress and Exposition 2010, Vancouver, British Columbia, Canada, November 12-18, 2010. 323. M. K. Hossain, M. E. Hossain, M. Hosur and S. Jeelani, “Investigation of Carbon Nanofibers (CNFs) Effects on the Flexural and Thermal Behavior of E- Glass/Polyester Composites” ASME International Mechanical Engineering Congress and Exposition 2010. British Columbia, Canada, November 12-18, 2010 324. S. Zainuddin, M. V. Hosur, R. Barua, H. Rao and S. Jeelani, “Influence of amino functionalized multi-walled carbon nanotube reinforcement on the mechanical and thermal properties of SC-15 epoxy nanocomposite,” ‘nano Future’, for the 21st Century, International conference on “Nanotechnology – Materials and Composites for Frontier Applications,” 14-15, October, 2010, Pune, India (Invited). 325. Alfred Tcherbi-Narteh, Mahesh V. Hosur, Shaik Zainuddin, Shaik Jeelani, “Compression and Flexural Response of Carbon/Epoxy-Nanoclay Nanocomposites Subjected to UV Radiation and Condensation,” International Mechanical Engineering Congress and Exposition, IMECE 2010, November 12-18, Vancouver, Canada. 326. Alfred Tcherbi-Narteh, Mahesh Hosur, Shaik Zainuddin, Shaik Jeelani “Compression and Flexural Response of Carbon/Epoxy-Nanoclay Nanocomposites Subjected to UV Radiation and Condensation,” SAMPE Fall Conference, 11-14 October, 2010, Salt Lake City, UT. 327. M. K. Hossain, M. E. Hossain, M. Hosur and S. Jeelani, “Comparison of High Strain Rate Compressive Responses of Conventional and CNF-Filled Nanophased E- Glass/Polyester Composites,” Materials Science & Technology 2010 Conference & Exhibition. Houston, TX, October 17-21, 2010. 328. Mahesh Hosur, Rajib Barua, Shaik Zainuddin, Shaik Jeelani, “Processing and Characterization of VGCNF Infused Epoxy Nanocomposites Using Three Different Techniques,” SAMPE Fall Conference, 11-14 October, 2010, Salt Lake City, UT. 329. Mahesh V. Hosur, Rajib Barua, Shaik Zainuddin, Shaik Jeelani, Ashok Kumar, Jonathan Trovillion, “Processing Optimization and Characterization of MWCNT infused Epoxy Nanocomposites Using Three Different Techniques,” proceedings of the American Society for Composites, technical conference, Sept. 19-21, 2010, 53

Dayton, OH. 330. G. Strawder, M. Hosur, S. Jeelani, “Thermal and Mechanical Studies of Wood Flour Reinforced Polyurethane Composites,” proceedings of the American Society for Composites, technical conference, Sept. 19-21, 2010, Dayton, OH. 331. M. K. Hossain, M.W. Dewan, M. Hosur, S. Jeelani, “Mechanical and Thermal Characterization of Modified Jute/Biopol Nanophased Green Composite,” Proceedings of the American Society for Composites, Technical conference, Sept. 19-21, 2010, Dayton, OH. 332. M. K. Hossain, M. Hosur, S. Jeelani, “Effects of CNF on Compression and Thermal Responses of E-Glass/Polyester Nanocomposite,” Proceedings of the American Society for Composites, technical conference, Sept. 19-21, 2010, Dayton, OH. 333. Alfred Tcherbi-Narteh, M.V. Hosur, S. Jeelani, “Effect of UV Radiation on Mechanical and Thermal Properties of Carbon Fiber Reinforced Polymer Composites,” Proceedings of the American Society for Composites, technical conference, Sept. 19-21, 2010, Dayton, OH. 334. Mahesh Hosur, Rajib Barua, Shaik Zainuddin, Shaik Jeelani, Ashok Kumar, Jonathan Trovillion, Yadira Perez, “Processing and Characterization of Epoxy Nanocomposites with MWCNTs/CNFs Using Thinky and 3-Roll Shear Mixing Techniques,” 1st TMS-ABM International Materials Congress, July 26-30, 2010, Rio de Janeiro, Brazil. 335. Mahesh Hosur, Md. Atiqur Rahman, Shaik Jeelani, “Impact Response of Nanophase Foam Core Sandwich Composites with Braided Carbon/Epoxy Facings,” 9th International Conference on Sandwich Structures, ICSS 9, Pasadena, CA, June 14- 16, 2010. 336. Mohammad Kamal Hossain, Muhammad Enayet Hossain, Mahesh Hosur, Shaik Jeelani and Rangari, V., “High Strain Rate Compression Behavior of Conventional and CNF-Filled-Nanophased Glass/Polyester Composites,”, Proceedings of the NSTI-Nanotech Conference, CA, USA, June 21-24 (2010). 337. Mohammad Kamal Hossain, Muhammad Enayet Hossain, Mahesh Hosur, Shaik Jeelani and Rangari, V., “Fabrication and Thermo-mechanical Characterization of CNF-Filled Polyester and E-Glass/Polyester Nanophased Composites,” Proceedings of the NSTI-Nanotech Conference, CA, USA, June 21-24 (2010). 338. Mohammad Kamal Hossain, Muhammad Enayet Hossain, Mahesh Hosur, Shaik Jeelani and Rangari, V., “High Strain Rate Compression Behavior of Conventional and CNF-Filled-Nanophased Glass/Polyester Composites,” Proceedings of the NSTI-Nanotech Conference, CA, USA, June 21-24 (2010). 339. Mohammad K. Hossain, Muhammad E. Hossain, Mahesh V. Hosur and Shaik Jeelani, “Dynamic Characterization of CNF-Filled E-Glass/Polyester Nanophased Composite,” Proceedings of the SAMPE ’10, the International SAMPE Symposium and Exhibition, Seattle, WA, USA, May 17-20 (2010). 340. Y. Zhou, E. White II, M. Hosur, S. Jeelani, “Influence of TiO2 Nanoparticles on Flexural Properties of Epoxy,” Proceedings of the SAMPE ’10, the International SAMPE Symposium and Exhibition, Seattle, WA, USA, May 17-20 (2010). 341. Md. A. Bhuiyan, M. V. Hosur, S. Jeelani, “ Low-Velocity Impact Behavior of Sandwich Composites with Neat and Nanophased Foam Core and Triaxial (0±45° and 0±60°) Braided Carbon Fiber Face Sheets, International Conference on Computational & Experimental Engineering and Sciences, ICCES10, Las Vegas, 54

March 29-April 2, 2010.H. 342. Mahfuz, F. Powell, R. Granata, M. Hosur, “Treatment of Carbon Fibers with POSS and Enhancement in Mechanical Properties of Composites,” Proceedings of the SAMPE ’10, the International SAMPE Symposium and Exhibition, Seattle, WA, USA, May 17-20 (2010). 343. Rangari, V., Sanchita Dey, Mohammad Ghouse, Shaik Jeelani, Metal and metal oxide coated CNTs their applications in thermoset and thermoplastic polymers, ,International Conference on Carbon Nanotechnology: Potential and Challenges, Indian Institute of Technology Kanpur, INDIA, December 15-17, 2010. 344. Rangari, V., T. A. Hassan, S.Jeelani R. K. Rana, Size Reduction of Egg Shell Particles: The Effect of Ball Milling and Sonication Time Variation, MRS- Fall meeting Nov 30th 2010, Boston. 345. Rangari, V., A. Perveen and S. Jeelani, Synthesis and Crystal Growth of Iron Oxide Nanoparticles for Drug Delivery Applications, MRS-Fall meeting Nov 29- 2010, Boston 346. Rangari, V., M. Ghouse, Seyhan Boyoglu and Shaik Jeelani, Synthesis of ZnO/CNTs hybrid nanoparticles and their reinforcement in Nylon-6 polymer fibers, ACCM-7 (The 7th Asian-Australian Conference on Composite Materials) Nov 15-18, 2010, Taipei, Taiwan 347. Tarig A. Hassan, Rangari, V., and Shaik Jeelani, Bio-based Calcium Carbonate Nanoparticles and their polymer nanocomposites, ICNP, September 24-26, 2010, Kottayam, Kerala , India. 348. Rangari,V., Sanchita Dey and Shaik Jeelani, Synthesis of Au and Au/Cu alloy nanoparticles on multiwalled carbon nanotubes by using microwave irradiation, 18th Congress IFHTSE, July, 26 to 30, 2010, in Rio de Janeiro - RJ - Brazil, 349. Rangari, V., SanchitaDey, and S. Jeelani, Synthesis and microscopic characterization of metal and metal alloy nanoparticles coated CNTs hybrid composites, M&M (Microscopy and Microanalysis), August1-5, 2010, Portland, OR. 350. Rangari, V., M. Yousuf, S. Jeelani, Alignment of Si3N4 nanorods in Polypropylene single fibers, Nanotech June 21-24, 2010, Anaheim, CA. 351. T.A. Hassan, Rangari, V., V. Fallon, Y. Farooq, S. Jeelani, Mechanochemical and Sonochemical Synthesis of Bio Based Nanoparticles Nanotech June 21-24, 2010, Anaheim, CA. 352. Rangari, V., Sanchita Dey and S Jeelani, Synthesis and characterization of Ag/CNTs and their polymer nanocomposites, SAMPE-2010, May 17-20, 2010, Washington State Convention Center, Seattle, WA. 353. Tarig A. Hassan, Rangari, V., an Shaik Jeelani, Synthesis and characterization of eggshell/polylite bio nanocomposites, SAMPE-2010, May 17-20, 2010, Washington State Convention Center, Seattle, WA. 354. Rangari, V., Md. Reza-E-Rabby, Shaik Jeelani, Synthesis and XPS characterization of SiC/Polyhedral oligomeric sil-sesquioxane, SAMPE-2010, May 17-20, 2010, Washington State Convention Center, Seattle, WA. 355. Synthesis and Characterization of Bio-based CaCO3/Polylite polymer nanocomposites, Tarig A. Hassan, Vijay K. Rangari and Shaik Jeelani, ICME-2011, 18-20 December 2011, BUET, Dhaka, Bangladesh.

55

356. Thermal and Mechanical Properties of Microwave curedSiC/ EPOXY Nanocomposites. V.K.Rangari, Md. Reza-E-Rabby, S. Jeelani, ICCM-18 International Conference of Composite Materials Jeju, Korea Aug 21st-26th 2011. 357. Synthesis and characterization of Hybrid titanium/ calcium carbonate nanoparticles for Tissue regeneration applications Ashley Heard, Vitus Apalangya, Vijaya K Rangari and Shaik Jeelani, 241st ACS National Meeting & Exposition, March 27-31, 2011, Anaheim, CA. 358. In-situ growth of CNTs on Woven Carbon Fiber for Advanced Structural Applications, V.K. Rangari, R. Samsur, S. Jeelani,SAMPE-May 23-26, 2011, Long Beach, CA. 359. Synthesis and Characterization of Poly(Methyl Methacrylate)/Aerosil Silica Nanocomposite Thin Films, V.K. Rangari, A. Gaines, S. Jeelani, SAMPE-May 23- 26, 2011, Long Beach, CA. 360. M. V. Hosur, H. Maroju, and S. Jeelani, “Effect of Alkali Treatment on the Performance of Flax Fiber Reinforced Polyester Composites,” Proceedings of the International Conference on Mechanical Engineering (ICME 2011), Dhaka, Bangladesh. 361. M. B. A. Salaam, M. V. Hosur, S. Zainuddin and S. Jeelani, “Characterization of NH2- MWCNT/Epoxy Nanocomposites Using Two Different Cure Cycles,” Proceedings of the International Conference on Mechanical Engineering (ICME 2011), Dhaka, Bangladesh. 362. M. M. Rahman, S. Zainuddin, M. V. Hosur, A. Kumar, J. Trovillion, and S. Jeelani, “Effect of Enhanced Cross-link Density on Interfacial Shear Strength of E- Glass/Epoxy Composites Modified by Amino-Functionalized MWCNTs”, Proceedings of the International Conference on Mechanical Engineering (ICME 2011), Dhaka, Bangladesh. 363. N. Jahan, M. V. Hosur, S. Zainuddin, and S. Jeelani, “Mechanical and Thermal Characterization of COOH-Functionalized MWCNT Infused Epon 862 Nanocomposites,” Proceedings of the International Conference on Mechanical Engineering (ICME 2011), Dhaka, Bangladesh. 364. Y. Zhou, M. Hosur, S. Jeelani, and S. Zainuddin, “Effect of clay on tensile, flex and fatigue behavior of carbon fiber reinforced epoxy,” Proceedings of IMECE 20011, 2011 ASME International Mechanical Engineering Congress and Exposition, November 11-17, 2011, Denver, Colorado, USA. 365. M. M. Rahman, S. Zainuddin, M. V. Hosur, C. J. Robertson, M.B.A. Salam, Ashok Kumar, S. Jeelani, “Experimental Investigation of E-Glass/Epoxy Composites Modified Using NH2 Functionalized Multi-Walled Carbon Nanotubes Through Sonication and Calendaring Methods,” Proceedings of the SAMPE Fall Conference, Fort Worth, TX, October 17-20, 2011. 366. M.B.A. Salam, S. Zainuddin, M. V. Hosur, M. M. Rahman, J. Holly Jr., S. Jeelani, “Mechanical and Thermal Investigation of NH2 Functionalized Multi-Walled Carbon Nanotube Epoxy Nanocomposites,” Proceedings of the SAMPE Fall Conference, Fort Worth, TX, October 17-20, 2011. 367. A. Tcherbi-Narteh, M. Hosur, and S. Jeelani, “Mechanical and Thermal Properties of Carbon/Epoxy Nanoclay Composites Exposed to Synergistic Effect of UV Radiation and Condensation,” Proceedings of the 18th International Conference on Composite Materials (ICCM-18), August 21-26, 2011, Jeju Islands, South Korea. 56

368. M. Harika, M. Hosur, S. Jeelani, “Studies on the Fabrication and Characterization of Flax Fiber/Bio-Composites,” CD Proceedings of the 18th International Conference on Composite Materials (ICCM-18), August 21-26, 2011, Jeju Islands, South Korea. 369. M. K. Hossain, M. W. Dewan, M. V. Hosur, and S. Jeelani, “Durability Study of Nanophased Jute-Based Green Composites,” CD proceedings of the Nanotech Conference and Expo 2011, June 13-16, 2011. 370. M. K. Hossain, C. Okoro, M. V. Hosur, S. Jeelani, and V. Rangari, “Mechanical Characterization of XD-Grade Carbon Nanotube/Epon 862 Processed by Dual Phase Dispersion Technique,” CD proceedings of the Nanotech Conference and Expo 2011, June 13-16, 2011. 371. C.U. Okoro, M.K. Hossain, M. Hosur, S. Jeelani, “Mechanical and Thermal Characterization of XD- Grade Carbon Nanotube/Epon 862 Processed by Dual Phase Dispersion Technique,” Proceedings of the SAMPE Conference, 2011, Long Beach, CA, May 23, 2011. 372. M.K. Hossain, M.W. Dewan, R. Carver, M. Hosur, S. Jeelani, “Thermal and Mechanical Performance of Jute- Polyester Nanophased Biocomposites,” Proceedings of the SAMPE Conference, 2011, Long Beach, CA, May 23, 2011. 373. M.K. Hossain, K.A. Imran, M. Hosur, S. Jeelani, “Effect of Seawater on Mechanical Behavior of Conventional and Nanophased Carbon/Epoxy Composites,” Proceedings of the SAMPE Conference, 2011, Long Beach, CA, May 23, 2011. 374. Alfred Tcherbi-Narteh, Mahesh Hosur and Shaik Jeelani, “Influence of Nanoclay on the Durability of Woven Carbon/Epoxy Composites,” International Conference on Composites for 21st Century: Current & Future Trends, Jan. 4-7, 2011, Bangalore, India. 375. Mechanochemical Synthesis of Bio Based Calcium Silicate Nanoparticles for Biomedical Applications, Vijaya Kumar Rangari, Boniface Tiimob, Shaik Jeelani, MRS Fall Meeting & Exhibit, November 25 - 30, 2012, Hynes Convention Center, Boston, MA. 376. Fabrication and Characterization of Poly (methyl methacrylate) /Bio-based Hydroxyapatite Composites for Scaffold Applications, Vijaya Kumar Rangari, Temesgen Samuel, Vitus Apalangya, Shaik Jeelani. MRS Fall Meeting & Exhibit, November 25 - 30, 2012, Hynes Convention Center, Boston, MA. 377. Synthesis and Characterization of Bio-based CaCO3/Bio- plast GS 2189 Nanocomposites, T.A. Hassan, V.K. Rangari, S. Jeelani, Tuskegee University, SAMPE-Tech 2012. Charleston Convention Center, North Charleston, South Carolina Conference: October 22-25, 2012. 378. Bio-Based Calcium Carbonate Nanoparticles for Drug Delivery Applications, D.L. Render, V. Rangari, S. Jeelani, T. Samuel, K. Fadlalla, Tuskegee University, SAMPE-Tech 2012 Charleston Convention Center, North Charleston, South Carolina Conference: October 22-25, 2012. 379. Microscopic, Thermal and Mechanical Characterization of Hybrid Nanoparticles of SiC/SiO2 Infused Polypropylene Composites; James L. Davis, Vijaya K. Rangari and Shaik Jeelani, Microscopy and Microanalysis, July 29-Aug2nd 2012, Phoenix, AZ. 380. Biobased Calcium Carbonate (CaCO3) Nanoparticles for Drug Delivery Applications Diane Render, Vijaya Rangari, Khalda Fadlalla, Temesgen Samueland Shaik Jeelani Biosensors & Bioelectronics-2012 May 14-16 Las Vegas, USA.

57

381. Synthesis of silver nanoparticles in porous activated charcoal for water purification applications, Vitus Apalangya, Vijaya Rangari Temesgen Samuel and Shaik Jeelani, Biosensors & Bioelectronics-2012 May 14-16 Las Vegas, USA 382. Profiling and Characterization of Silver, Zinc Oxide and Silver/ Zinc Oxide Hybrid Nanoparticles for antimicrobial and antifungal properties, Myisha Roberson, Vijaya Rangari, Clayton Yates, Temesgen Samuel, and Shaik Jeelani, MRS Spring, April 5- 3, 2012, San Francisco, CA. 383. PBT/BRAZILIAN Clay Nanocomposites Prepared by melt intercalation: Effect of Organophilic clay content and Ionizing Radiation Treatment”. Mariana N. Sartori1, Maiara S. Ferreira, Francisco R. Valenzuela Díaz, Vijaya K. Rangari, Shaik Jeelani, Esperidiana A. B. Moura TMS 2014 143rd ANNUAL MEETING & EXHIBITION, February 16-20, San Diego Convention Center, San Diego, California. 384. M. M. Rahman, S. Zainuddin, M. V. Hosur, J.E. Malone, Ashok Kumar, S. Jeelani, “Optimization of low velocity impact properties of E-glass/epoxy composites using plasticizing modifier,” ASME, International Mechanical Engineering Congress and Exposition, November 9-15, 2012, Houston, TX 385. Mohammad K Hossain, Emory Head, Mahesh Hosur, Shaik Jeelani, Fabrication and Characterization of Untreated, Alkali Treated, and POSS Treated Jute Fiber Reinforced–Polylactic Acid Composites, IMECE 2012, Houston, Texas, November 9-14, 2012. 386. Alfred Tcherbi-Narteh, Mahesh Hosur, Shaik Jeelani, “studies on cure kinetics and UV radiation of nanoclay modified SC15 epoxy resin used in structural applications,” SAMPE Fall Conference, October 25, 2012, Charleston, SC. 387. Eldon D. Triggs II, Alfred Tcherbi - Narteh, Mahesh V. Hosur, Shaik Jeelani, “Cure and Thermomechanical Characterization of Partially Bio-renewable Soybean Based Polyester Resin and Jute Fiber Laminates,” SAMPE Fall Conference, October 23, 2012, Charleston, SC. 388. M.B.A. Salam, M.V. Hosur, M. Jones, M. Fletcher, S. Jeelani, “Mechanical and Thermomechanical Behavior of Carbon/Epoxy Composites with Carboxyl Functionalized Multi-Walled Carbon Nanotubes,” Proceedings of the Nanocon 012, 2nd International Conference on Nanotechnology Innovative Materials, Processes, Products and Applications, October 18-19, 2012, Pune, India. 389. Eldon D. Triggs II, Mahesh V. Hosur, Shaik Jeelani, “Jute and Flax Based Biodegradable Composites for High Power Amateur Rocket Structural Applications,” Proceedings of the American Society for Composites Conference, Sept. 30- Oct. 3, 2012, Arlington, TX. 390. Alfred Tcherbi-Narteh, Mahesh Hosur, Shaik Jeelani, “Effects of UV Radiation On Degradation of Material Properties of Diglycidyl Ether of Bisphenol A (DGEBA) Epoxy Modified With Different Montmorillonite Nanoclays,” Proceedings of the American Society for Composites Conference, Sept. 30- Oct. 3, 2012, Arlington, TX. 391. Muhammad Rahman, Mahesh Hosur, Shaik Zainuddin, Uday Vaidya, Ashok Kumar, Jonathan Trovillion, Shaik Jeelani, “Effect of amino-functionalized MWCNTs on high velocity impact properties of E-glass/epoxy composites,” Proceedings of the American Society for Composites Conference, Sept. 30-Oct. 3, 2012, Arlington, TX. 392. M.M. Rahman, S. Zainuddin, M.V. Hosur, S. Jeelani, “Enhancement of Energy Absorption Capability of GFRP Composites using Plasticizing Modifier,” CD Proceedings of the SAMPE 2012, May 22, Baltimore, MD. 58

393. Mahesh Hosur, Mohammad Hossain, Alfred-Tcherbi Narteh, Md. Kazi Imraan, and S. Jeelani, “Effect of Nanoclay in Reducing Environmental Degradation of Carbon/Epoxy Nanocomposites,” Proceedings of the 33rd International Technical Conference and Forum, SEICO 12, Paris, France, March 2012. 394. Bio-waste derived calcium silicate nanoparticles for tissue regeneration and structural reinforcement applications. Boniface J. Tiimob, Vijaya K. Rangari, Tsemesgen Samuel, Shaik Jeelani. Nanobio-summit, Montgomery Al, October 18, 2013. 395. Synthesis and characterization of monocalcium silicate nanoparticles from egg Shell and the study of their biological and mechanical properties. Boniface J.Tiimob, Vijaya K. Rangari, Tsemesgen Samuel, Shaik Jeelani Poster presented at science and technology conference, Montgomery Al, April 5-6, 2013. 396. Preparation and Evaluation of 5-fluorouracil Drug Delivery System with Calcium Carbonate Nanoparticles, Diane Render, Vijaya Rangari, Temesgen Samuel, Madan Vig, Jay Ramapuram, Kasturi Pawar, and Shaik Jeelani, EPSCoR National Conference, Nov. 4-6, 2013, Nashville, TN. 397. Electron-Beam induced cross-linking of extruded Nylon-6 nano-composite fibers: Effect of irradiation doses and incorporated with Diamond coated Carbon Nano Tubes and Diamond nano-particles, Muhammad A. Imam, M.G. Gomes, Eesperidiana.A.B. Moura, Shaik Jeelani and Vijay.K. Rangari, 18th International Conference on Surface modification materials by ion beams (SMMIB) Sept 15-20, 2013, Kusadasi, Turkey. 398. Effect of Electron-Beam Irradiation on Nylon-6/Diamond Coated CNTS Composite Fiber, M.A. Imam, S. Jeelani,V.K. Rangari, Tuskegee University; M.G. Gomes, E.A.B. Moura,Sampe Tec, October, 21-24, 2013 2013, Century II Convention Center, Wichita, Kansas. 399. Synthesis of metal and metal oxide/CNTs hybrid nanoparticles and their reinforcement in polymers, V. K Rangari, M. Ghouse, S. Dey, S. Jeelani, 19th ICCM, July 28th -2nd August, 2013, Montreal, Canada. 400. Development of Drug Delivery System Using Biobased Calcium Carbonate Nanoparticles, Diane Render, Vijaya Rangari, Temesgen Samuel, Madan Vig, Jay Ramapuram, Kasturi Pawar, and Shaik Jeelani, Nanotech May 13-16, 2013, Washington, DC 401. Synthesis of TiO2/CNTs hybrid nanoparticles and their reinforcement in Nylon-6 polymer fibres, Vijaya K. Rangari, Ghouse M Mohammad Shaik Jeelani, Spring 2013 ACS National Meeting (April 7-11, 2013), New Orleans. 402. Fabrication and characterization of biodegradable polymer/eggshell based hydroxyapatite composite fibers for scaffold applications, V. A. Apalangya, T. Samuel, V. K. Rangari, S. Jeelani, Emerging Researchers National (ERN) conference, February 28 - March 2, 2013. Washington D.C April 2013. 403. Mohammad K Hossain, Md. Mahmudur R Chowdhury, Kazi A Imran, Mahmud B Salam, Mahesh Hosur and Shaik Jeelani, “Durability Study of Low velocity Impact Responses of Conventional and Nanophased CFRP Composites Exposed to Seawater,” Proceeding of IMECE2013, ASME International Mechanical Engineering Congress and Exposition, November 15-21, 2013, San Diego, CA. 404. Shaik Zainuddin, Tauhid Arefin, Mahesh Hosur, Shaik Jeelani, Ashok Kumar, “Recovery of low-velocity impact properties of glass fiber reinforced composites through self-healing technique,” Proceeding of IMECE2013, ASME International 59

Mechanical Engineering Congress and Exposition, November 15-21, 2013, San Diego, CA. 405. Mahesh Hosur, Harika Maroju, Shaik Jeelani, “Influence of Alkali Treatment on Properties of Flax Fiber Reinforced Polyester Composites,” Proceedings of the ICCM 13: International Conference on Composite Materials, Dubai, UAE, October 22-23, 2013. 406. Md. Nuruddin, Alfred Tcherbi-Narteh, Mahesh Hosur, Reaz A Chowdhury, S. Jeelani, Peter Gichuhi, “Cellulose Microfibrils Extracted from Wheat Straw: A Novel Approach,” SAMPE Fall Conference, October 21-24, 2013, Wichita, KS. 407. Tanjheel H. Mahdi, Md. E. Islam, Mahesh V. Hosur, Shaik Jeelani, “Low Velocity Impact Characterization of Carbon Fiber Reinforced Epoxy Composites Modified with Multi-Walled Carbon Nanotubes, Nanoclay and Hybrid Nanoparticles,” A Novel Approach,” SAMPE Fall Conference, October 21-24, 2013, Wichita, KS. 408. Md Ekramul Islam, Muhammad M. Rahman, Mahesh V. Hosur, Shaik Jeelani, “Kinetics of Degradation of Epoxy Composites Modified with Reactive Polyol Diluent And Amino-Functionalized Multi-Walled Carbon Nanotubes,” SAMPE Fall Conference, October 21-24, 2013, Wichita, KS. 409. S. Zainuddin, T. Arifin, F. Abdalla, M. V. Hosur, J.D. Tyson, S. Jeelani, “Mechanical and Thermo-Mechanical Properties of Jute/Epoxy, Glass/Epoxy and Hybrid Jute/Glass/Epoxy Composites,” SAMPE Fall Conference, October 21-24, 2013, Wichita, KS. 410. Mohammad K. Hossain, Md. Mahmudur R. Chowdhury, Mahmud B. Salam, Mahesh V. Hosur, Shaik Jeelani, and Nydeia Wright Bolden, “Tensile and Flexural Properties of Woven Carbon/Epoxy-XD-CNT Nanophased Composites,” SAMPE Fall Conference, October 21-24, 2013, Wichita, KS. 411. Mahesh Hosur, Gregory Strawder, Shaik Jeelani, “Effects of Filler Type on the Behavior of Closed Cell Polyurethane Composite Foams and their Sandwich Constructions,” Foams® 2013, 11th International Conference on Advances in Foam Materials & Technology, September 11-12, 2013, Seattle, WA. 412. Alfred Tcherbi-Narteh, Mahesh Hosur, Eldon Triggs, Shaik Jeelani, “Behavior of Partially Cured Epoxy Composites Modified With Different Amounts of Montmorillonite Nanoclay Exposed To UV Radiation,” Proceedings of the American Society for Composites-Twenty-Eight Technical Conference, September 9-11, 2013, College Park, PA. 413. Eldon D. Triggs II Alfred Tcherbi-Narteh, Mahesh V. Hosur, Shaik Jeelani, “Thermo- Mechanical Characterization of Sustainable Composites Made From Bio-Based Polyester Resins and Nitroxide Mediated Hydroperoxide Initiators,” Proceedings of the American Society for Composites-Twenty-Eight Technical Conference, September 9-11, 2013, College Park, PA. 414. Mahesh Hosur, Gregory Strawder, Shaik Jeelani, “Low-Velocity Impact Response of Sandwich Composites with FRP Facesheets and Nanoclay-Wood Flour Modified Polyurethane Foam, The 8th Pacific Rim International Conference on Advanced Materials and Processing, August 4-9, 2013, Waikoloa, Hawaii. 415. Eldon Triggs, Michael Wells, Mahesh Hosur, Alfred Tcherbi-Narteh, Shaik Jeelani, “Cure and Thermo-Mechanical Characteristics of Bio-Based Polyester Composites Using Hydroperoxide Initiators,” 19th International Conference on Composite Materials, July 28-August 2, 2013, Montreal, Canada. 60

416. Muhammad M Rahman, Mahesh Hosur, Shaik Zainuddin, Shaik Jeelani, “High Velocity Impact Response of E-Glass/Epoxy Composites Modified With NH2- MWCNT,” 19th International Conference on Composite Materials, July 28-August 2, 2013, Montreal, Canada 417. Mahesh Hosur, Gregory Strawder, Shaik Jeelani, “Effects of Nanoclays and Wood Flour on the Performance of Polyurethane Foams,” 19th International Conference on Composite Materials, July 28-August 2, 2013, Montreal, Canada. 418. A. Tcherbi-Narteh, M. Hosur, E. Triggs, S. Jeelani, “Thermal and Viscoelastic Properties of SC-15 Epoxy Resin Composites Modified With Montmorillonite Nanoclay Exposed To UV Radiation,” 19th International Conference on Composite Materials, July 28-August 2, 2013, Montreal, Canada. 419. M Hosur, H Maroju, S Jeelani, “Comparative Studies on the Mechanical and Thermo- Mechanical Performance of Flax Fiber Reinforced Polyester and Polyester- Biopolymer Blend Resins,” Advanced Materials Research, August 2013, 747, 399- 402, edited by Narongrit Sombatsompop, Debes Bhattacharyya and Karen Hoi-Yan Cheung, The 4th International Conference on Multi-Functional Materials and Structures (MFMS 2013), July 14-17, 2013, Bangkok, Thailand. 420. Nusrat Jahan, Mahesh Hosur, Shaik Jeelani, “Low-Velocity Impact of Woven Carbon/Epoxy Composites with MWCNTs,” 54th AIAA/ASME/ASCE/AHS/ ASC Structures, Structural Dynamics, and Materials Conference, 7-11, April 2013, Boston, MA 421. Influence of eggshell nanopowder on the tomato plant absorption of calcium toward mitigating blossom end rot problem. Lashachiah Parks and Desmond G. Mortley, Boniface J. Tiimob, Vijaya K. Rangari, Shaik Jeelani, George Washington Carver Lecture Series, Tuskegee AL, 30th October, 2014. 422. Effect of eggshell nanopowder on the thermal and mechanical properties of eco- friendly polymer matrix. Boniface J. Tiimob, Vijaya K. Rangari and Shaik Jeelani. Nanobio Summit. The University of Alabama, Tuscaloosa AL, 23-24th October 2014. 423. Effects of the incorporation of clay on properties of the biodegradable copolyester/PLA flexible film. Andressa Alves da Silva, Valquiria A. Silva, Boniface Tiimob, Vijaya K. Rangari, Shaik Jeelani, Francisco R. Valenzuela-Diaz, Esperidiana A. B. Moura, Technical contribution to the 69th ABM International Annual Congress, Sao Paulo Brazil, 21-25th July, 2014. 424. Studies on PBT/Brazilian clay nanocomposites by melt-intercalation process - synthesis and characterization. Andressa A. Silva, Roberta A. Lima, Boniface Tiimob, Shaik Jeelani, Vijaya K. Rangari, Francisco R. V. Díaz, Esperidiana A. B. Moura. Pan American Materials Conference, Sao Paulo Brazil 21-25th July 2014. 425. Graphene/Ag Hybrid Nanoparticles for Multifunctional Composite Applications with Graphene Layered Carbon Fiber, Chinedu Okoro ,Vijaya Rangari ,Shaik Jeelani, MRS-sprin April 21-25th 2014, San Francisco, California. 426. Effects of green calcium carbonate addition on mechanical and morphological properties of flexible films based on biodegradable polymer” Alexandra A. R. Silva; Valquiria A. Silva; Vijaya K. Rangari, Shaik Jeelani, Rene R. Oliveira, Francisco R. Valenzuela-Diaz, Esperidiana A. B. Moura TMS 2014 143rd ANNUAL MEETING & EXHIBITION, February 16-20, San Diego Convention Center, San Diego, California.

61

427. Vijaya Rangari, Shaik Jeelani, Design, synthesis of nanoparticles and fabrication of polymer nanocomposites, PACIFICHEM, 2015, Dec 15-20, Honolulu, Hawaii. 428. Md. Ekramul Islam, Tanjheel H. Mahdi, Mahesh V. Hosur, Shaik Jeelani, "Characterization of Carbon Fiber Reinforced Epoxy Composites Modified with Nanoclay and Carbon Nanotubes," 6th BSME International Conference on Thermal Engineering (ICTE 2014), 19-21 December, 2014, Dhaka, Bangladesh. 429. Md. Nuruddin, Mahesh Hosur, Eldon Triggs, Shaik Jeelani, “Comparative Study of Properties of Cellulose Nanofibers from Wheat Straw Obtained by Chemical and Chemi-Mechanical Treatments,” ASME International Mechanical Engineering Congress & Exposition, November 14-20, 2014, Montreal, Canada. 430. Peter Owuor, Alfred Tcherbi-Narteh, Mahesh Hosur, Shaik Jeelani, “Durability Studies of Hybrid Composite of E-Glass/Carbon Fibers in Different Solvents for Bridge Deck Panel Application,” ASME International Mechanical Engineering Congress & Exposition, November 14-20, 2014, Montreal, Canada. 431. T. H. Mahdi, M. E. Islam, M. V. Hosur, Alfred Tcherbi-Narteh, S. Jeelani, “Characterization of Mechanical and Viscoelastic Properties of SC-15 Epoxy Nanocomposites Reinforced with Multi-Walled Carbon Nanotubes, Nanoclay and Binary Nanoparticles," ASME International Mechanical Engineering Congress & Exposition, November 14-20, 2014, Montreal, Canada. 432. Md. Ekramul Islam, Tanjheel H. Mahdi, Mahesh V Hosur, Alfred Tcherbi-Narteh, Shaik Jeelani, “Low Velocity Impact Characterization of Nanoclay and MWCNTs Binary Nanoparticles modified Carbon/Epoxy Composites Subjected to Marine Environmental Conditioning,” ASME International Mechanical Engineering Congress & Exposition, November 14-20, 2014, Montreal, Canada. 433. T. H. Mahdi, M. E. Islam, M. V. Hosur, S. Jeelani, “Characterization of Mechanical and Viscoelastic Properties of Carbon Fiber Reinforced Epoxy Composites Modified with Multi-walled Carbon Nanotubes, Nanoclay and Hybrid Nanoparticles,” Composites and Advanced Materials Expo (CAMX), Orlando, FL October 13-16, 2014. 434. Md. Nuruddin, Alfred Tcherbi-Narteh, Mahesh Hosur, Shaik Jeelani, “Effect of Chemical treatments on Morphology, Crystalline and Thermal properties of Kenaf Fiber,” Composites and Advanced Materials Expo (CAMX), Orlando, FL October 13-16, 2014. 435. T. H. Mahdi, M. E. Islam, M. V. Hosur, S. Jeelani, “Synergistic Effects of Nanoclay and MWCNTs on the Performance of Epoxy and Carbon Fiber Reinforced Epoxy Composites,” Nanotechnology-Smart Materials, Composites, Applications and New Innovations, 3rd International Conference, NANOCON 014, 14-15, October 2014, Pune, India 436. Shaik Zainuddin, Mahesh Hosur, Chuckwuma Nweke, David Price, Shaik Jeelani, Ashok Kumar, “Durability of glass/epoxy nanocomposites subjected to synergistic elevated temperature and moisture conditions,” American Society for Composites 29th Technical Conference, 16th US-Japan Conference on Composite Materials & ASTM-D30 Meeting, September 8-10, 2014, University of California San Diego, La Jolla, CA USA. 437. Eldon D. Triggs II, Mahesh Hosur, Shaik Jeelani, “Comparative Life Cycle Analysis of Tung Oil/Jute Fiber Bio-Composites to Synthetic Unsaturated Polyester Resins/E- glass Composites,” American Society for Composites 29th Technical Conference, 62

16th US-Japan Conference on Composite Materials & ASTM-D30 Meeting, September 8-10, 2014, University of California San Diego, La Jolla, CA USA. 438. Md. Nuruddin, T. H. Mahdi, M. V. Hosur, S. Jeelani, “Mechanical and Thermal Properties of Cellulose Nanofibers Reinforced Epoxy Polymer Nanocomposites,” American Society for Composites 29th Technical Conference, 16th US-Japan Conference on Composite Materials & ASTM-D30 Meeting, September 8-10, 2014, University of California San Diego, La Jolla, CA USA. 439. Md. Ekramul Islam, Tanjheel H. Mahdi, Mahesh V Hosur, Alfred Tcherbi-Narteh, Shaik Jeelani, “Comparison of Low Velocity Impact Properties of MMT, MWCNT and MMT/MWCNT Hybrid Nanoparticles modified Carbon/Epoxy Composites Subjected to Marine Environmental Conditioning,” American Society for Composites 29th Technical Conference, 16th US-Japan Conference on Composite Materials & ASTM-D30 Meeting, September 8-10, 2014, University of California San Diego, La Jolla, CA USA. 440. T. H. Mahdi, M. E. Islam, M. V. Hosur, S. Jeelani, "Evaluation of Fatigue Properties of Carbon Fiber Reinforced Epoxy Composites Modified with Nanoclay," First World Conference on Fracture and Damage Mechanics: Metals, Glass, Ceramics, Semi- conductors, Polymers, Alloys, Composites, Nanocomposites, Gels, and Adhesives (FRACTURE 2014): August 9- 11, 2014 at Mahatma Gandhi University, Kottayam, Kerala, India. 441. Shaik Zainuddin, Abdullah Fahim, Tauhid Arefin, Mahesh Hosur, Shaik Jeelani, “Mechanical performance of jute/epoxy, glass/epoxy and hybrid jute/glass/epoxy composites,” Proceeding of SAMPE 2014, Seattle, June 2-5, 2014. 442. Abdullah Fahim, Shaik Zainuddin, Ema K. Masuma, Jeremiah Tyson, Mahesh V. Hosur, Shaik Jeelani, “Morphological, Thermal and Tensile Properties of Halloysite Nanotubes Filled Poly Hydroxybutyrate-co-Hydroxyvalerate (PHBV) Nanocomposites,” Proceeding of SAMPE 2014, Seattle, June 2-5, 2014. 443. Shaik Zainuddin, Masuma Ema, Price David, Mahesh Hosur, Shaik Jeelani, “Flexure, Thermomechanical and Thermal Properties of Epon Composites Using Bentonite Nanoclay,” Proceeding of SAMPE 2014, Seattle, June 2-5, 2014. 444. Boniface Tiimob, Vijaya Rangari, Shaik Jeelani, Lashachiah Parks, Desmond George Mortley. Influence of Eggshell Nanopowder on Calcium Uptake in Tomato. American th Society of Horticulture Science (ASHA), New Orleans LA, 6 August, 2015. 445. Synthesis of Graphenenanoplates from organoclay templates and their reinforcement in thermoset polymer, Vijaya K Rangari, Emanuel Akugre, and Shaik Jeelani, ICCM- 20 July 19-24, 2015, Copenhegan, Denmark. 446. Investigation on Mechanical and Thermal Behaviours of Copolyester/pla blend reinforced with TiO2 nanoparticle, Roberta Lima, Andressa Silva, Vijaya Rangari, Shaik Jeelani , Esperidiana Moura, 2015 TMS Annual Meeting & Exhibition, March 15-19 2015, Walt Disney world Orelando, Fl, USA. 447. Development of functional nanomaterials from waste avian eggshells. Boniface J. Tiimob, Vijaya K. Rangari, and Shaik Jeelani. Emerging Researchers National Conference, Washington DC, 19-21st February 2015. 448. Aliphatic-aromatic copolyester/PLA biodegradable binary polymer blends for potential packaging applications. Boniface J. Tiimob, Vijaya K. Rangari and Shaik Jeelani, Science and technology open house, Montgomery AL, 30-31th January 2015.

63

449. Shatori Meadows, Alfred Tcherbi-Narteh, Mahesh Hosur, and Shaik Jeelani, “Kinetic Analysis of Different Peroxide Initiators on the Cure Behavior of Biobased and Recycled Unsaturated Polyester Envirez Resins,” Proceedings of The Composites and Advanced Materials Expo (CAMX 2015), October 26-29, 2015, Dallas, Texas, USA. 450. Md Nuruddin, Raju Gupta, Alfred Tcherbi-Narteh, Mahesh Hosur, Shaik Jeelani, “Preparation of poly(L-lactide )/Poly(methyl methacrylate) polymer blend: A Novel Approach,” Proceedings of The Composites and Advanced Materials Expo (CAMX 2015), October 26-29, 2015, Dallas, Texas, USA. 451. Md Nuruddin, James McKee, Alfred Tcherbi-Narteh, Raju Gupta, Mahesh Hosur, Shaik Jeelani, “Flexure and Impact Behavior of E-glass/Carbon Hybrid Fiber Reinforced Epoxy Polymer Composite,” Proceedings of The Composites and Advanced Materials Expo (CAMX 2015), October 26-29, 2015, Dallas, Texas, USA. 452. Dereca Hubbard, Md. Nuruddin, Alfred Tcherbi-Narteh, Mahesh Hosur, and Shaik Jeelani, “Synthesis and Characterization of Novel Phenolic Resin System Based on Lignin Extracted From Different Biomass Resources,” Proceedings of The Composites and Advanced Materials Expo (CAMX 2015), October 26-29, 2015, Dallas, Texas, USA. 453. Mahesh Hosur, Tanjheel Mahdi, Md. Ekramul Islam, Alfred Tcerbi-Narteh, Shaik Jeelani, “Fabrication and Performance of Carbon/Epoxy Composites With Hybrid of Nanoclay and MWCNTS,” 20th International Conference on Composites Materials (ICCM-20), Copenhagen, Denmark, July 22, 2015. 454. Alfred Tcherbi-Narteh, Md. Nuruddin, Mahesh Hosur, Raju Gupta, Allyson Lattimore, and Shaik Jeelani “Influence of Montmorillonite Nanoclay, Graphene Nanoplatelets and Combined Nanoclay/Graphene Hybrid on Properties of Epoxy Composite,” 20th International Conference on Composites Materials (ICCM-20), Copenhagen, Denmark, July 23, 2015. 455. Nano-engineered eggshell toughened polylactic acid/aliphatic-aromatic copolyester flexible polymer blend, Boniface Tiimob, Vijaya Rangari, and Shaik Jeelani, ACS 251th meeting at San Diego, CA, March 14th-18th. 2016. 456. Vijay Rangari, Vitus Apalangya, Shaik Jeelani; Tiimob Boniface, Samuel Temesgen, Fabrication of Polymer/Bio-based Hydroxyapatite Composite Electrospunn Fibers for Scaffold Applications, (Oral)TMS-2016, Feb 14-18, 145th Annual Meeting and Exhibition at Nashville TN, 457. Boniface J.Tiimob, Shaik Jeelani and Vijaya K. Rangari, Nano Eggshell Toughened Polylactic Acid/Aliphatic‐aromatic Copolyester Flexible Biodegradable Blend. ERN- th Conference in STEM, Washington DC, 25-27 February 2016. 458. Boniface J.Tiimob, Shaik Jeelani and Vijaya K. Rangari. Effect of reinforcement of eggshell based nanopowder on biodegradable flexible polymer blends. Emerging th Researchers National Conference, Washington DC, 25-27 February 2016. 459. Azizi Turner, Boniface J. Tiimob, Shaik Jeelani, Vijaya K. Rangari. Nano eggshell tailored polyurethane foam composites for structural material design. Emerging Researchers National Conference, Washington DC, 25-27th, February 2016. 460. Marilyn H. Creer, Boniface Tiimob, Shaik Jeelani, Vijaya Rangari. Effect of bagasse filler nanoparticles on the thermomechanical properties of bio-based epoxy system. Emerging Researchers National Conference, Washington DC, 19-21st February 2015; 25-27th, 2016.

64

461. Farooq Syed, Shaik Zainuddin, Amari carter, Mackenzie Matthews, Mahesh Hosur, Shaik Jeelani, “Single-walled carbon nanotube added epon 862 nanocomposites: Investigating the crosslinking behavior and interfacial properties through molecular dynamic simulations,” SAMPE, Long Beach, CA, May 23-26, 2016. 462. Shaik Zainuddin, Abdullah Fahim, Shaik Shoieb, Mahesh V. Hosur, Dawen Li, Brittany Terry, Shaik Jeelani, “Jute nanobiocomposites reinforced with grafted halloysite nanotubes added PHBV polymer,” SAMPE, Long Beach, CA, May 23-26, 2016. 463. Chukwuma E. Nweke, Shaik Zainuddin, Mahesh Hosur, Vincent Hollowman, Shaik Jeelani, “Processing and characterization of CNT/core shell siloxane modified high temperature bismaleimide polymeric composites,” SAMPE, Long Beach, CA, May 23-26, 2016. 464. Vertonica Powell-Rose, Mahesh Hosur, Shaik Jeelani, Influence of Nanoclay on Curing, Mechanical and Thermal Properties of Bio-Based Epoxy Resin System, CAMX, The Composites and Advanced materials Expo, September 26-29, 2016, Anaheim, CA. 465. M. Hosur, T. Mahdi, E. Islam, S. Jeelani, Flexural, thermomechanical and low- velocity impact studies of CFRP composites with nanoclay and multiwalled carbon nanotubes, American Society for Composites 31st Technical Conference and ASTM Committee D30 Meeting, September 19-22, 2016, Williamsburg, VA. 466. Conversion of Egg and Seashell Waste into a Printable Biomaterial for Dental Tissue Engineering Scaffolds, V. Hembrick-Holloman, S. Jeelani and V. Rangari Nov 9-10, 2017, 5th Nanobiosumit-2017. 467. Fabrication of Polycarbonate-Silica Polymer Nanocomposites Layer by Layer Through 3D Printing, Chibu O. Umerah, Mohanad Idrees, Vijaya K. Rangari, Shaik Jeelani, Nov 9-10, 2017,5th Nanobiosumit-2017. 468. Eggshell-silver nanoparticles reinforcement in polymer films and their applications, Boniface J. Tiimob, Shaik Jeelani, Vijaya K. Rangari, ICCM-21, Xian, China, August 20th -26th 2017. 469. Highly Porous Carbon Nanoparticles from Recycled Waste Papers for Water Filtration applications, Manik Biswas, Vijay Rangari and Shaik Jeelani, SAMPE– Seattle May 22nd -25th, 2017. 470. Synthesis of Porous Carbon from waste Peanut Hull by pyrolysis, Alayna Huckleby, Shaik Jeelani and Vijaya Rangari, 2017 Emerging Researchers National (ERN) Conference in STEM on March 2-4, 2017. 471. Conversion of Egg and Sea Shell Waste into a Valuable Nanomaterial for Tissue Engineering, Vincent Hembrick-Holloman, Vijay Rangari, Shaik Jeelani, 2017 Emerging Researchers National (ERN) Conference in STEM on March 2-4, 2017. 472. Studying the Bioactivity of Tissue Engineering Scaffolds Derived from Egg and Sea Shell Waste Using SEM, EDS, & TEM, V Hembrick-Holloman, VK Rangari, T Samuel, S Jeelani, Microscopy and Microanalysis 25 (S2), 1058-1059. 473. Shaik Zainuddin, Chukwuma E. Nweke, Mahesh Hosur, Vincent Hollowman, Shaik Jeelani, “Effect of Core Shell Siloxane/Carbon Nanotubes Modifiers on the Mechanical and Thermal Performance of Bismaleimide Nanocomposites,” CAMX, The Composites and Advanced materials Expo, December 11-14, 2017, Orlando, FL.

65

474. Alfred Tcherbi-Narteh, Delroy Watson, Shatori Meadows, Lenore S. Miller, Shavette Thompson, Mohammad Zaheeruddin, Mahesh Hosur, and Shaik Jeelani, “Interactions between Different Nanoparticles used as Binary Reinforcements in Polymer Nanocomposites,” Proceedings of the American Society for Composites 32nd Technical Conference, October 22-25, 2017, West Lafayette, IN. 475. Mahesh Hosur, Md. Nuruddin, Dereca Hubbard, Alfred Tcherbi-Narteh, Shaik Jeelani, “Extraction of cellulose and lignin from biomass and their use in reinforcing polymers and synthesis of phenolic resins,” The 21st International Conference on Composites Materials (ICCM-21), August 20-25, 2017, Xi'an, China. 476. Alfred Tcherbi-Narteh, Delroy Watson, Mohammad Zaheeruddin, Donnell Tobias, Mahesh Hosur, Shaik Jeelani, “Studies on Nanocomposites Reinforced with Nanoclay and Graphene Nanoplatelets, and Hybrid Composites with Glass and Carbon Fabric Reinforcements,” The 21st International Conference on Composites Materials (ICCM-21), August 20-25, 2017, Xi'an, China. 477. Shatori Meadows, Mahesh Hosur, Alfred Tcherbi-Narteh, Shaik Jeelani, “Optimization Studies on the Synthesis and Characterization of Bio-based Epoxidized Soybean Oil (ESBO),” The 21st International Conference on Composites Materials (ICCM-21), August 20-25, 2017, Xi'an, China. 478. Development of 3D printing of Polycarbonate/Silica polymer Nanocomposites, Chibu O. Umerah, Mohanad O. Idrees, Shaik Jeelani, Vijaya K. Rangari, SAMPE, May, 21-24, 2018, Long Beach, CA. 479. Synthesis and characterization of highly porous carbon from waste packaging material for value added, Vijay Rangari, Mohanad Idrees and Shaik Jeelani, March 11-15, 2018 TMS Annual Meeting & Exhibition, Phoenix, AR. 480. Mahesh Hosur, Tanjheel Mahdi, Ekramul Islam, Shaik Jeelani, “Nanoparticle incorporation in thermoset polymers to enhance the performance of fiber reinforced composites,” proceedings of the Nanocon 018, nanotechnology – Applications, Advances and Innovations, Pune, India, 25-26, October, 2018. 481. Mahesh Hosur, Alfred Tcherbi-Narteh, Delroy Watson, Mohamed Zaheeruddin, Kristoff McIntosh, Shaik Jeelani, “Polymeric Nanocomposites With Binary Nanoparticles Reinforcements and Hybrid Composites for Marine Applications, ECCM 18-18th European Conference on Composite Materials, Athens Greece, 22- 24th June 2018. 482. Alfred Tcherbi-Narteh, Delroy Watson, Zaheeruddin Mohammad, Tobias Donnell, Mahesh Hosur and Shaik Jeelani, "Properties of Carbon, E-glass and Hybrid E- glass/Carbon Fiber Reinforced Polymer Composites Exposed to Seawater Conditioning," SAMPE 2018 Conference and Exhibition, May 21-24, 2018, Long Beach, CA. 483. Synthesis of Biochar and 3D Printing of Sustainable Biochar Recycled PET Composite: Vijaya Rangari, Mohanad Idrees, Shaik Jeelani, TMS, March 10-14th 2019, San Antonio, TX. 484. SEM/EDS as a Tool to Investigate Pyrolysis Induced Transformations in Chicken Feather Fibers, Z Mohammed, S Jeelani, V Rangari, Microscopy and Microanalysis 25 (S2), 1112-1113. 485. Surface Modification of Bio Derived Carbon with Low Temperature Plasma Treatment for Polymer Composite Filler Applications, Vijaya Rangari, Zaheeruddin Mohammed, Shaik Jeelani, TMS conference San Diago, Feb 23-27, 2020. 66

Technical Reports

1. “Power Accelerator System for Axial Impact Studies”, Report No. 69-3, February 1969 for the Department for the US Navy Office of Naval Research.No. N00014-68-0187 2. “Design and Performance of Power Accelerator Systems for Impact Studies”, Technical Report No. 71-2 for the US Navy Office of Naval Research. No. N00014- 68-0197. 3. “Two State Light-Gas Gun Installation for Hyper-Velocity Impact Studies”, Report No. 73-3 for the US Navy Office of Naval Research. Ministry of Defense, Contract No. N00014-0197. 4. “Surface Integrity in the Machining of Certain High Strength Materials Part II (Measurement of Residual Stress),” 5. Surface and Sub-Surface Damage in the Machining of 18% Nickel Maraging Steel, 6242Titanium Alloy and Red Brass” For the National Science Foundation, Grant GH-33761. 6. “Prediction of Cumulative Fatigue Damage”. Report No. TI-NAVY-1 for the Department of the US Navy, Naval Air Systems Command. Contract No. N00019- 78-0034. 7. “Investigation of Cumulative Fatigue Damage for Selected Materials”, Report No. TI- NAVY-2 for the Department of the US Navy, Naval Air Systems Command, Contract No. N00019-80-c-0564. 8. “A Study of Cumulative Fatigue Damage in 2024-T4 Aluminum Alloy”. Report No. TI-NAVY-3 for the Department of the US Navy, Naval Air Systems Command. Contract No. N00019-80-c-0564. 9. “A Study of Cumulative Fatigue Damage in 2011-T3 Aluminum Alloy”. Report No. TI-NAVY-4 for the Department of the US Navy, Naval Air Systems Command. Contract No. N00019-79-c-0564. 10. “Investigation of Cumulative Fatigue Damage for Selected Materials”, Report No. TI- NAVY-5 October 1983 for the Department of the US Navy, Naval Air Systems Command, Contract No. N00019-82-c-0316. 11. “Effect of Cutting Conditions on Fatigue Life of 2024-T351 Aluminum Alloy”, Report No. TI-NAVY-6 December 1983 for the Department of the US Navy, Naval Air Systems Command, Contract No. N00019-82-c-0316. 12. “Characterization of High-Cycle Fatigue Behavior of Selected materials (Titanium 6A1-4V and AISI 4130 Steel) for NASA-MSFC, under grant No. NAG 8-20.13. “Design of a Sub-Sized Fatigue Specimen”, for NASA-MSFC, under grant No. NAG8-20. 13. “Effect of Electric Discharge Machining on the Fatigue Life of Inconel 718”, for NASA-MSFC, under Grant No. NGT-01-005-751. 14. “A New Technique of Fatigue Life Prediction”. Report for NASA-MSFC, Under Grant No. NAG-068, April 1988. 15. “Manufacture and Characterization of SiC/SiC Composites”, TU-ONR/URI-1, (September 15, 1986 – September 30, 1987). 16. “Manufacture and Characterization of SiC/SiC Composites”, TU-ONR/URI-2, (October 1, 1987 – September 30, 1988). 17. Hygrothermal Influence on Flexural Properties o Kevlar 49-Graphite/Epoxy Hybrid 67

Composites”, TU-ONR/URI-2/E (October 1, 1987-September 30, 1988.) 18. Hygrothermal Influence on Inter-laminar Shear Strength of Kevlar 49- Graphite/Epoxy Hybrid Composites”, TU-ONR/URI-2/F (October 1, 1987- September 30, 1988.) 19. “Manufacture and Characterization of SiC/SiC Composites”, TU-ONR/URI-3, (October 1, 1988 – September 30, 1989). 20. “Moisture and Temperature Induced Degradation in Tensile Properties of Kevlar- Graphite/Epoxy Hybrid Composites”, TU-ONR/URI-3/B 21. “Characterization of Ceramic/Ceramic Composites”, TU-ONR/URI-3/C. (October 1, 1988-September 30, 1989.) 22. Characterization of Ceramic/Ceramic Composites”, TU-ONR/URI-4 23. “Effects of Reinforcement Geometry on the Mechanical Properties of SiCw/A1203 Composites”, TU-ONR/URI-4E. 23. “High Temperature Characterization of SiCw/SiC Composites and Prediction of Flexural Properties by Energy Method”, TU-ONR/URI-5A. 24. “Compressive Response of Thermoplastic Composites by Layered Shell Elements”, ALCOA Foundation, Pittsburgh, Pennsylvania. 25. Mechanical Property Characterization of Refractory Composites”, National Aerospace Plane/Joint Program Office (NASP/JPO), WPAFB, OH. 26. An Investigation of the Effects of Environment and Compression on the Response of Carbon/Peek Thermoplastic Composites”, NASA Marshall Space Flight Center, Huntsville, AL. 27. Mechanical Property Testing of Resin Transfer Molded Materials”, McDonnel Douglas Missile Systems, St. Louis, Missouri. 28. Reverse Fatigue of RTM Composites”, 3M Corporation, St. Paul, Minnesota. 29. “Effect of Stress Ratio on the Fatigue Damage in C/C Composites”, Strategic Defense Command (SDC), US Army, Huntsville, Alabama. 30. “High Temperature Fatigue of Continuous Fiber Reinforced Silicon Carbide/Silicon Nitride Composites”, National Science Foundation (NSF), Washington, DC 20550. 31. “Survivability of Affordable Aircraft Composite structures” Interim Progress Report, April 2001, Air force Research laboratory, Grant No. F33615-99-C-3608. 32. “Dynamic Characterization of Graphite/Epoxy Composite Laminate Under Inplane Compression, Single and Double Lap Shear Loading at Subzero, Room and Elevated temperatures”, Interim Progress Report, September 2001, U.S. Army Cold Regions Research Laboratory, Grant No. DACA42-01-C-0039. 33. “Survivability of Affordable Aircraft Composite Structures” Interim Progress Report, October 2001, Air force Research Laboratory, Grant No. F33615-99-C-3608. 34. “Dynamic Characterization of Graphite/Epoxy Composite Laminate Under Inplane Compression, Single and Double Lap Shear Loading at Subzero, Room and Elevated temperatures”, Interim Progress Report, January 2002, U.S. Army Cold Regions Research Laboratory, Grant No. DACA42-01-C-0039. 35. “Dynamic characterization of Graphite/Epoxy Composite Laminate Under In-plane Compression, Single and Double Lap Shear Loading at Subzero, Room and Elevated temperatures,” Interim Progress Report, March 2002, U.S. Army Cold Regions Research Laboratory, Grant No. DACA42-01-C-0039. 36. “Dynamic Characterization of Graphite/Epoxy Composite Laminate under Inplane Compression, Single and Double Lap Shear Loading at Subzero, Room and 68

Elevated Temperatures”, Interim Progress Report, June 2002, U.S. Army Cold Regions Research Laboratory, Grant No. DACA42-01-C-0039. 37. “Survivability of Affordable Aircraft Composite structures” Interim Progress Report, April 2002, Air force Research laboratory, Grant No. F33615-99-C-3608. 38. “Survivability of Affordable Aircraft Composite structures” Interim Progress Report, September 2002, Air force Research laboratory, Grant No. F33615-99-C-3608. 39. “Dynamic characterization of Graphite/Epoxy Composite Laminate Under Inplane Compression, Single and Double Lap Shear Loading at Subzero, Room and Elevated temperatures,” Interim Progress Report, September 2002, U.S. Army Cold Regions Research Laboratory, Grant No. DACA42-01-C-0039. 40. “Dynamic characterization of Graphite/Epoxy Composite Laminate Under Inplane Compression, Single and Double Lap Shear Loading at Subzero, Room and Elevated temperatures,” Interim Progress Report, December 2002, U.S. Army Cold Regions Research Laboratory, Grant No. DACA42-01-C-0039. 41. “Dynamic characterization of Graphite/Epoxy Composite Laminate Under Inplane Compression, Single and Double Lap Shear Loading at Subzero, Room and Elevated temperatures,” Interim Progress Report, March 2003, U.S. Army Cold Regions Research Laboratory, Grant No. DACA42-01-C-0039. 42. “Survivability of Affordable Aircraft Composite structures” Final Technical Report, April 2003, AFRL-VA-WP-TR-2003-3071, Vol. 1: Overview, Manufacturing of Affordable Composites and Ballistic Impact Testing. 43. “Survivability of Affordable Aircraft Composite structures” Final Technical Report, April 2003, AFRL-VA-WP-TR-2003-3072, Vol. 2: High Strain Rate Characterization of Affordable Composites. 44. “Survivability of Affordable Aircraft Composite structures” Final Technical Report, April 2003, AFRL-VA-WP-TR-2003-3073, Vol. 3: Studies on the Low-Velocity Impact Response of Woven Composites. 45. “Dynamic characterization of Graphite/Epoxy Composite Laminate Under Inplane Compression, Single and Double Lap Shear Loading at Subzero, Room and Elevated temperatures,” Interim Progress Report, June 2003, U.S. Army Cold Regions Research Laboratory, Grant No. DACA42-01-C-0039. 46. “Dynamic Characterization of Graphite/Epoxy Composite Laminates Under Inplane Compression, Punch Shear and Transverse Loading, Volume I: Overview and High Strain Rate Characterization,” Final Technical Report, October 2003, U.S. Army Cold Regions Research Laboratory, Grant No. DACA42-01-C-0039. 47. “Dynamic Characterization of Graphite/Epoxy Composite Laminates Under Inplane Compression, Punch Shear and Transverse Loading, Volume II: Transverse Loading of Adhesively Bonded Composite Structures: Analysis and Experimentation,” Final Technical Report, October 2003, U.S. Army Cold Regions Research Laboratory, Grant No. DACA42-01-C-0039.

Honors and Award

1. Global Messenger Award presented by Southeastern Consortium for Minorities in Engineering (SECME), 2001 2. Outstanding Contribution Award by the National Association of Minority Program Administrators (NAMEP A), 1996

69

3. Exxon Foundation Faculty Development Award for Outstanding Research, 1984. 4. Outstanding Teacher from ME Department, 1978-1979 5. Outstanding Teacher from School of Engineering, 1977-1978 6. Outstanding Teacher from ME Department, 1977-1978 7. Faculty Achievement Award, 1977 8. Outstanding Teacher from School of Engineering, 1977 9. UNCF Professor of the Year, 1976 10. Tuskegee Teacher of the Year, 1976 11. Outstanding Teacher from ME Department, 1975-1976

Professional and Scientific Societies

1. Registered Professional Engineering in the State of Alabama, (Alabama PE#1197) Member, American Society of Mechanical Engineers (ASME) 2. Member, American Society of Engineering Education, (ASEE) 3. Member, Society of Experimental Stress Analysis (SESA) 4. Member, American Ceramic Society 5. Member, Sigma XI 6. Member, Pi Tau Sigma Honor Society 7. Secretary of Chattahoochee Sub-Section of ASME, 1984-1985 8. Vice President of Chattahoochee Sub Section of ASME, 1985-1986 9. Secretary of Chattahoochee Sub-Section of ASME, 1986-1987, 1987-1988 10. Member, American Ceramic Society

K-12 Initiatives

Dr. Jeelani was responsible (1980-1996) for writing proposals and raising approximately $600,000 each year and conducting recruitment and retention programs in the School of Engineering and Architecture at Tuskegee University. Most significant one was the $2.25 million grant from the DOD/ ARO grant for the period 1993-1998.

Tuskegee University is well known for its innovative K-12 programs- all designed and implemented by Dr. Jeelani, during his tenure as a faculty member and Associate Dean of Engineering and Architecture. These programs have become effective mechanisms to identify, motivate and recruit students for academic programs in science and engineering. The programs are briefly described below.

Saturday Academy The program was offered for 8th through l2th graders attending Schools in Macon County, Alabama, throughout the academic year to strengthen their background in Mathematics, Physics, Chemistry, Biology and Physical Science, so that they could qualify for admission in science and engineering curricula at the college level. Approximately l00 students were served, each year.

70

Pre-Freshman Enrichment Program (PREP-8, PREP-9 and PREP-10) These were six-week summer programs for students completing their 8th, 9th, and 10th grades, respectively. PREP consisted of instruction in Mathematics, Biology, Chemistry, Physics and Computer Programming. Laboratory sessions were designed to provide students with experience in experimentation, report writing and problem solving. Field trips were arranged for the students’ professional development. Approximately 75 students were served, each summer.

Minority Introduction to Engineering (MITE) MITE was a one to two week summer program designed to expose high school juniors/rising seniors to various aspect of engineering and college life. The main features of the program were lectures on engineering by faculty and engineering alumni, laboratory demonstrations, seminars, field trips and picnics. The program was offered at no cost to the students, except their transportation to and from Tuskegee. Approximately 60 students were served through MITE, each summer.

Research Apprenticeship for Disadvantaged High Schoolers (RADHS) RADHS was a summer program designed to provide high school juniors/rising seniors the opportunity for “hands on” laboratory experience under the supervision of research faculty. The students were also provided instruction in Computer Programming, Computer Aided Design, Technical Writing and basic skills in research. Seminars, guest lectures, field trips and career counseling were some additional features of RADHS. The students were provided a stipend at a rate of minimum wage for the entire duration of the program. Approximately 20 students were involved in RAHDS, each summer.

Freshmen Accelerated Start-Up and Training for Retention in Engineering Curricula (FASTREC) FASTREC was an eight-week summer program offered at Tuskegee every year for high school graduates who were about to enter college. In the FASTREC program students pursued an intensive program of study in English, Mathematics and Engineering Graphics or Computer programming. Up to ten semesters credit hours were be earned towards the B.S. Degree in Engineering. The students also attended guest lectures, seminars, field trips and picnics. The program was at no cost to the student. Non- commuting students were required to stay in the campus dormitory. Approximately 100 students participated in FASTREC, each summer.

MITE, RADHS and FASTREC are still offered at Tuskegee University. At least 90% of the FASTREC participants enter science and engineering programs at Tuskegee University.

Scholarship and Mentoring Program Dr. Jeelani has developed and implemented an impressive scholarship and mentoring program with support from the industry and the national labs. Corporations and foundations such as Boeing, Ford Foundation, GEM, General Electric, General Motors, NACME, Proctor and Gamble and Raytheon provide scholarship and mentoring support for students. Students are selected for these scholarships based on merit and need. Scholarship recipients are also assigned the responsibility of tutoring and mentoring their juniors and serving as big brothers

71

and big sisters. Dr. Jeelani has authored several educational partnership agreements (EPA) with corporations and national labs. These EPAs include scholarships, support with academic preparation, internships and mentoring. Two EPAs, Tuskegee-Raytheon and Tuskegee-AFML (Air Force Materials Laboratory), are being replicated at other institutions.

72