DOCSLIB.ORG

Aluminium Suppliers Directory Media Information for More Than 45 Years Fair Issue ALUMINIUM PRINT | DIGITAL | ONLINE 2021

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Aluminium Suppliers Directory Media Information for More Than 45 Years Fair Issue ALUMINIUM PRINT | DIGITAL | ONLINE 2021 THE Aluminium Suppliers Directory Media Information For more than 45 years Fair issue ALUMINIUM PRINT | DIGITAL | ONLINE 2021 Suppliers Directory online www.Alu-Lieferverzeichnis.de/en Aluminium Suppliers Directory 2022 Index Subject Page Brief description + special distribution 03 Reader structure analysis + distribution 05 Advertising options 07 NEW The ADVERTORIAL 07 The PRINT + ONLINE COMBINATION 08 The COMPANY ENTRY 09 10 Category list 10 Raw materials, primary metal products, semi-finished products, rolled products unfinished 13 Light metals trade 14 Aluminium products 30 Plant, machines and auxiliary equipment for, extracting, forming and finishing aluminium, tolling jobs Consultancy, expert opinions, information 47 Order Form 49 Contact 50 02 Aluminium Suppliers Directory 2022 Fair issue ALUMINIUM 2021 Description The Aluminium Suppliers Directory has, since its introduction more than 45 years ago, esta- searching and unnecessary wasted time. Online linked Internet and email addresses faci- blished itself as the most comprehensive, leading reference work for the Aluminium industry litate the search for further detailed information, as well as the search for trade marks, alloys and its associated peripherals. Our users benefit from the optimum combination of a print, and special products of the companies. USB and online medium. The B2B target group worldwide is reached directly and without The Aluminium Suppliers Directory and www.Alu-Lieferverzeichnis.com stand for qualified divergence loss.The Aluminium Suppliers Directory offers all users a speedy and clear contacts between purchasing and sales. access. The detailed product breakdown with numerous technical terms avoids laborious PRINT | DIGITAL | ONLINE A SPECIAL DISTRIBUTION OF THE 2022 EDITION IS PROVIDED FOR: ALUMINUM 2021, THE WORLD'S LEADING TRADE FAIR FOR ALUMINUM AND ITS APPLICATION INDUSTRIES, DÜSSELDORF, SEPTEMBER 28-30, 2021 FIND THE OTHER SPECIAL DISTRIBUTIONS PLANNED FOR THE ISSUE YOU CURRENTLY ON HTTPS://WWW.ALU-LIEFERVER- ZEICHNIS.DE/EN/MEDIA-INFORMATION/ (SUBJECT TO CHANGE). 03 Aluminium Suppliers Directory 2022 Fair issue ALUMINIUM 2021 Print run 10,000 (print und digital) Fax +49 211 1591 150 Language German/English Internet www.Alu-Lieferverzeichnis.de/en Frequency of publication annually E-Mail [email protected] Print mode Offset Payment terms strictly net, 30 days from invoice date Print documentation Database as EPS, TIF or PDF Payment possibilities Commerzbank AG Dusseldorf IBAN: DE91 3008 0000 0212 6151 00 Book format 148 mm wide x 210 mm high SWIFT-Code: DRESDEFF Type Area 117 mm wide x 172 mm high Deutsche Bank AG Dusseldorf Advertisement deadline 02.07.2021 IBAN: DE04 3007 0010 0155 7008 00 SWIFT: DEUTDEDD Date of publication 20.09.2021 ISSN 0947-4064 Publisher ISBN 978-3-96144-138-9 DVS Media GmbH Place of performance Dusseldorf/Germany Aachener Straße 172, 40223 Dusseldorf and jurisdiction Entries & Advertising Britta Wingartz +49 211 1591-155 [email protected] Vanessa Wollstein +49 211 1591-152 [email protected] Price List no. 27 valid from January, 1st, 2021 04 Aluminium Suppliers Directory 2022 Fair issue ALUMINIUM 2021 Reader structure analysis + distribution 18% Contract work Samples / Advertising Metal construction copies 29% Reshaping 1% CNC processing Aluminum industry Separation technology Primary aluminum industry Surface treatment Secondary aluminum industry Aluminum semi-finished products Research & Teaching Aluminum trade Universities Universities of Industry sectors applied sciences Automotive industry Rail vehicle industry Information / advice Aviation 16% Appraiser Mechanical engineering Engineers Toolmaking Architects Construction Industrial design Civil engineering Organizations Electrical engineering Business associations Packaging Chambers of Commerce and Joining technology Industry Surface technology 2% Chamber of crafts 9% Individual distribution Retail sale Exhibitions Congresses 4% 21% 05 Aluminium Suppliers Directory 2022 Fair issue ALUMINIUM 2021 Distribution Print run: 10,000 (printed and digital) 34% 21% Germany Other Countries (China, Russia, Canada, India, USA, Brazil, United Arab Emirates) Austria Switzerland Italy Belgium The Netherlands Spain 26% 10% 4% 3% 2% 06 Messe- Aluminium LieferverzeichnisSuppliers Directory 2022 2022 ausgabeFair issue zur ALUMINIUMALUMINIUM 20212021 WerbeoptionenYour advertising opportunity NEW DasThe ADVERTORIAL DieThe optimaleideal addition Ergänzung to your zu classic Ihrer klassischen advertising Werbungwith an editorial-like mit redaktionsähnlichem background. The Hintergrund. publication Die of Veröffentlichung your text / image Ihres material Text-/Bildmaterials is done by us, adapted erfolgt angepasst to the layout an ofdas the Layout aluminum des Aluminiumdelivery directory. Lieferverzeichnis durch uns. LOGO Erspidipitat velictum voloris solupta spitium nulluptus ea voloruptat aut im et isimin conest acea qui quia qui aut aUt estiatur, sim con renihictur magnist laute non consequost, corum, temperi- atem dolo to modipsam il et quas net omnimiliquia sitiatem dolor atent pellut aspel intionsed moloruptae omnimus ea sequo inciis quidis si aut haribeat laut Ugia venes idem ad esciae. Nam Sant, as re con numquod iciate dolupti debita con rest, sumetusam id que iliqui ad eat dolores tinctur acias dol Genit fugiae nullaccaest dolor am qui alit, sam ni- atio volest, quaeprepe enimet eium ius estinimet maximin por reiunt, simusci isquiatist ut eliquis cipicae pudigen dipsant quam quasit, odi cum quam LOGO estistor audis as idem volenis alibus nonessequodi dolorem porestem doloruptas LOGO eum remporest, quiandist lam aut faceritem veleces mi, iur? Erspidipitat velic- Oreptaspid et quia aut pe vendebit, commolo bero volum quassit, quo esti vo- tum voloris solup- Hendes auda volenis aut delignatium luptas doluptas aut hil molor solupta dunditatiant apistiori si as modi quati aut ta spitium nullup- vidios magniscil es iumeturio quiatiu vellandae sed ut quuntotae mod quo magnisi nctiae doluptint latius eriorrum quam tus ea voloruptat rehenih illenda eceatum quias autaquo ullatem porporionse dendis et quam fugitem vel molupta turibust autenda vereheni- aut im et isimin diorenet fugiation rerupicidi con conse hita de volor assit doles conem re consequo odisqui officia dollignim harum ande conest acea qui vello mos ese modions equidenimi, ventio iur sit, volo voluptaque nobit aperro omnis sendige nduntionsed quam, in quia qui aut aUt omnihillesto erae quodit, ellaut es non- rerchit perae doluptatquas idustrum estiatur, sim con sequas volo volorporero beature mo eaquae doluptam ero es acimint et renihictur magnist quaes eos dit et perovit asimint lam do- omnit molum ero dolorep erchitae- laute non consequost, corum, tempe- lor as earum ut as cum quam ut evelia rum que simollautem as dolecus ma- riatem dolo to modipsam il et quas volores tiaerio et officta tuscit doluptat gnihit preped que plab ipis cus etur? net omnimiliquia sitiatem dolor atent quodiscimus ad maionecabora exerum Dae nonet evenimillam rem vitatem pellut aspel ea suntotatur? estorporent eost, ipis secuptoolorpos intionsed molo- Exerum oditate aut lame ped maio. Optisi dipsunt ruptae omnimus con nullendit hit quo molore sus netNem ut deseque ea sequo ina ve omnihicia vero laborpo reriani unto eatem liatquatur con numquodsa- cupid explabo.Il serupictatus aute ratem. Eces estiur doLaborehent. ipsum Itatur. aborepu dipsam, odi blaborporate. 1/41/4 Seitepage 4-farbig4-coloured 1/21/2 Seitepage 4-farbig4-coloured 1/11/1 Seitepage 4-farbig4-coloured (Text(Text max.max. 180180 Zeichencharacters inkl. including Leerzeichen) spaces)) (Text(Text max.max. 380380 Zeichencharacters inkl. including Leerzeichen) spaces) (Text(Text max.max. 750750 Zeichencharacters inkl. including Leerzeichen) spaces) 490,- EUR 820,- EUR 1.590,-1,590,- EUR 07 Aluminium Suppliers Directory 2022 Your advertising opportunity The PRINT + ONLINE COMBINATION Online term: 12 months cover page + + + + 2nd, 3rd & back cover + skyscraper 1/1 page 4c + skyscraper 1/2 page 4c + skyscraper 1/4 page 4c + skyscraper EUR 2,300 each EUR 2,150 EUR 1,380 EUR 1,050 + + + Printing costs and production costs of supplements and bookmarks on request. two-sided supplement + skyscraper four-sided supplement + skyscraper bookmark + skyscraper EUR 2,420 EUR 2,750 Insertion costs (complete delivery) EUR 2,200 All prices given in EUR excl. VAT. 08 Aluminium Suppliers Directory 2022 Fair issue ALUMINIUM 2021 Your advertising opportunity The COMPANY ENTRY in almost 2,000 categories in the aluminum product directory ComfortPlus Premium PremiumPlus Service package Service package Service package DVS Media GmbH Aachener Straße 172 40223 Dusseldorf (Germany) Lieferieferverzeichnisverzeichnis SuppliersSuppliers DirectorDirectory Lieferieferverzeichnisverzeichnis SuppliersSuppliers DirectorDirectory PERIOD OF 12 MONTH P: +49 211 1591 - 155/152 DVS Media GmbH DVS Media GmbH F: +49 211 1591 - 150 NO AUTOMATIC RENEWAL Aachener Straße 172 Aachener Straße 172 E-mail: [email protected] 40223 Dusseldorf (Germany) 40223 Dusseldorf (Germany) Website: www.Alu-Lieferverzeichnis.de P: +49 211 1591 - 155/152 P: +49 211 1591 - 155/152 Contact: Britta Wingartz F: +49 211 1591 - 150 F: +49 211 1591 - 150 Vanessa Wollstein E-mail: [email protected] E-mail: [email protected] Price per entry Website: www.Alu-Lieferverzeichnis.de Website: www.Alu-Lieferverzeichnis.de EUR 179 Contact: Britta Wingartz Contact: Britta Wingartz Vanessa Wollstein Vanessa
Load more

Recommended publications
  • Evaluation of Tensile Shear Strength Under Salt Spray Test on Dissimilar Metal Spot Welding of Aluminum Alloy and Galvannealed Steel Sheet
    applied sciences Article Evaluation of Tensile Shear Strength under Salt Spray Test on Dissimilar Metal Spot Welding of Aluminum Alloy and Galvannealed Steel Sheet Sung-Min Joo 1, Young-Gon Kim 2 and Min-Suk Oh 3,* 1 Department of Naval Architecture and Ocean Engineering, Chosun University, Gwangju 61452, Korea; [email protected] 2 Gwangju Ppuri Technology Support Center, Korea Institute of Industrial Technology, Gwangju 61012, Korea; [email protected] 3 Division of Advanced Materials Engineering, Jeonbuk National University, Jeonju 54896, Korea * Correspondence: [email protected]; Tel.: +82-63-270-2305 Received: 26 October 2020; Accepted: 13 November 2020; Published: 16 November 2020 Abstract: In order to reduce the weight of parts in the automobile and electronic industries, various research on dissimilar welding techniques of aluminum and steel is being carried out. Since dissimilar materials have different physical and electrochemical characteristics, joining through conventional fusion welding is challenging, and there is a high probability of a decrease in strength of the welded joints. To solve this problem, a mechanical fastening method is mainly applied to join dissimilar parts with different material properties, but this process has disadvantages in terms of productivity improvement and cost reduction because additional consumables, such as rivets, are required. In this research, we investigated the optimization of the weld bonding conditions of joints using epoxy-based adhesive bonding and DeltaSpot welding for Al/Fe dissimilar materials. For each experimental condition, the corrosion resistance and tensile shear strength of the welded joints were evaluated according to salt spray test times of 0 h, 640 h, 1280 h, and 1920 h.
    [Show full text]
  • The Role of Zinc Layer During Wetting of Aluminium on Zinc-Coated Steel in Laser Brazing and Welding
    Available online at www.sciencedirect.com ScienceDirect Physics Procedia 56 ( 2014 ) 730 – 739 8th International Conference on Photonic Technologies LANE 2014 The role of zinc layer during wetting of aluminium on zinc-coated steel in laser brazing and welding M. Gatzena,*, T. Radela, C. Thomya, F. Vollertsena aBIAS – Bremer Institut fuer angewandte Strahltechnik GmbH, Klagenfurter Str. 2, 28359 Bremen, Germany Abstract The zinc layer of zinc-coated steel is known to be a crucial factor for the spreading of liquid aluminium on the coated surface. For industrial brazing and welding processes these zinc-coatings enable a fluxless joining between aluminium and steel in many cases. Yet, the reason for the beneficial effect of the zinc to the wetting process is not completely understood. Fundamental investigations on the wetting behaviour of single aluminium droplets on different zinc-coated steel surfaces have revealed a distinct difference between coated surfaces at room temperature and at elevated temperature regarding the influence of different coating thicknesses. In this paper the case of continuous laser brazing and welding processes of aluminium and commercial galvanized zinc-coated steel sheets are presented. It is shown that in the case of bead-on-plate laser beam brazing, the coating thickness has a measureable effect on the resulting wetting angle and length but does not have a significant impact in case of overlap laser beam welding. This might be linked to different heat transfer conditions. The results also strongly indicate that proper initial breakup of oxide layers is still required to accomplish good wetting on zinc-coated surfaces. © 2014 Published by Elsevier B.V.
    [Show full text]
  • Controlling Interfacial Reaction in Aluminium to Steel Dissimilar Metal Welding
    Controlling Interfacial Reaction in Aluminium to Steel Dissimilar Metal Welding A thesis submitted to the University of Manchester for the degree of Doctor of Philosophy in the faculty of Engineering and Physical Sciences 2015 Lei Xu School of Material Content CONTENTS List of Figures ......................................................................................................................... 6 List of Tables ......................................................................................................................... 21 List of Publications ............................................................................................................... 22 Abstract ................................................................................................................................ 23 Declaration ........................................................................................................................... 24 Copyright .............................................................................................................................. 25 Acknowledgements .............................................................................................................. 26 Chapter 1 Introduction ......................................................................................................... 27 1.1 State of the Art and Motivation ................................................................................. 27 1.1.1 Greenhouse Gas Emissions ................................................................................
    [Show full text]
  • Experimental Study and Numerical Simulation of Heat Transfer and Fluid Flow in Laser Welded and Brazed Joints
    Southern Methodist University SMU Scholar Mechanical Engineering Research Theses and Dissertations Mechanical Engineering Spring 2020 Experimental Study and Numerical Simulation of Heat Transfer and Fluid Flow in Laser Welded and Brazed Joints Masoud Mohammadpour [email protected] Follow this and additional works at: https://scholar.smu.edu/engineering_mechanical_etds Recommended Citation Mohammadpour, Masoud, "Experimental Study and Numerical Simulation of Heat Transfer and Fluid Flow in Laser Welded and Brazed Joints" (2020). Mechanical Engineering Research Theses and Dissertations. 24. https://scholar.smu.edu/engineering_mechanical_etds/24 This Dissertation is brought to you for free and open access by the Mechanical Engineering at SMU Scholar. It has been accepted for inclusion in Mechanical Engineering Research Theses and Dissertations by an authorized administrator of SMU Scholar. For more information, please visit http://digitalrepository.smu.edu. EXPERIMENTAL STUDY AND NUMERICAL SIMULATION OF HEAT TRANSFER AND FLUID FLOW IN LASER WELDED AND BRAZED JOINTS Approved by Dr. Radovan Kovacevic Dr. Blair Carlson Dr. Xin-Lin Gao Dr. Wei Tong Dr. Xu Nie EXPERIMENTAL STUDY AND NUMERICAL SIMULATION OF HEAT TRANSFER AND FLUID FLOW IN LASER WELDED AND BRAZED JOINTS A Dissertation Presented to the Graduate Faculty of the Bobby B. Lyle School of Engineering Southern Methodist University in Partial Fulfillment of the Requirements for the Degree of Doctor of Philosophy With a Major in Mechanical Engineering by Masoud Mohammadpour (B.S., Tabriz Azad University, Iran, 2010) (M.S., Urmia University, Iran, 2012) May 16 , 2020 Copyright (2020) Masoud Mohammadpour All Rights Reserved ACKNOWLEDGEMENTS My sincere gratitude goes to Professor Radovan Kovacevic, my advisor, for his continuous support and guidance in my research and completing this dissertation.
    [Show full text]
  • Maintenance Work Programmed Specification (MWPS) for Housing New Zealand: M-215
    Maintenance Work Programmed Specification (MWPS) for Housing New Zealand: M-215 Date: 1 July 2016 VERSION 3 SPECIFICATION of work to be done and materials to be used in carrying out the PBMC works scoped and as shown on any accompanying drawings © Housing New Zealand. This document has been developed by Housing New Zealand. Reproduction, adaptation or utilisation either in part or in whole without the prior written consent of Housing New Zealand is prohibited. M-215 Maintenance Work Programmed Specification V3 2016-17 Version 3 1 July 2016 Page 1 of 332 People and Property Team Maintenance Work Programmed Specification (MWPS) for Housing New Zealand TABLE OF CONTENTS 1013 DOCUMENT CONTROL ...................................................................................................... 4 1232 INTERPRETATION & DEFINITIONS .................................................................................. 5 1233 REFERENCED DOCUMENTS ............................................................................................ 7 1237 WARRANTIES ..................................................................................................................... 9 1250 ESTABLISHMENT & TEMPORARY WORKS ...................................................................11 1260 PROJECT MANAGEMENT ...............................................................................................15 1270 CONSTRUCTION ..............................................................................................................20 2110 DEMOLITION WORKS
    [Show full text]
  • Friction Stir Welding Contents
    Technical Handbook Friction Stir Welding Contents page page Introduction 4Equipment 37 Full-scale automation for Process principles 6 high-volume applications 37 Weldable alloys 6 Modular flexibility for Process characteristics 7 “standard” applications 37 Welding parameters 7 Robotised for more complex applications 37 Tools 7 Design principles 8 Tools for steels 8 Quality and enviromental aspects 39 Retractable pin tool 8 Environmental aspects of Friction Stir Welding 39 Bobbin tool 10 Less weld-seam preparation 39 Process speed 10 Fewer resources 39 Aluminium 13 Noise, an underestimated health threat 39 Energy saving FSW process 39 Application areas 15 Less post-treatment and impact Aerospace 15 on the environment 39 Space industry 15 Friction Stir Welded components offer Civil aviation 16 through-life environmental gains 40 Aerospace R&D 16 Quality 40 Shipbuilding 18 Application advances 18 Economics 41 Parts and components 19 Example of cost analysis 42 Automotive industry 21 Compared to arc welding 44 Automotive applications 22 Tailor welded blanks (TWB´s) 27 Conclusions 46 Superplastic forming 27 Extruders and extrusions – with special focus on rolling-stock panels 28 Steel and other high-temperature materials 30 Application examples 32 Case study: Swedish Nuclear 32 Case study: Marine Aluminium a.s, Norway 35 DISCLAIMER Whilst all reasonable efforts have been made to ensure the accuracy of the information contained in this handbook at the time of going to press, ESAB gives no warranty with regard to its accuracy or completeness. It is the responsibility of the reader to check the accuracy of the information contained in this handbook, read product labels and equipment instructions and comply with current regulations.
    [Show full text]
  • Paper on Comparision of Conventional Welding Methods with Solid-State Welding Techniques
    International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395 -0056 Volume: 03 Issue: 10 | Oct -2016 www.irjet.net p-ISSN: 2395-0072 PAPER ON COMPARISION OF CONVENTIONAL WELDING METHODS WITH SOLID-STATE WELDING TECHNIQUES 1V. prasanna Associate Professor ,Department of Mechanical Engineering, NITS, Hyderabad 2S. Narsing Rao , DGM Midhani, Hyderabad --------------------------------------------------------------------------------------------------------------------------------- Abstract:-The aim of the present study was to compare Arc welding (AW) Friction Stir Welding (FSW) method which is an innovative It is a fusion welding process in which heating of metals is solid-state welding technique with conventional welding accomplished by an electric arc. In most arc welding methods. Nowadays, the technologies are toward eco- processes, filler metal is added during the operation to friendly system. The eco-friendly systems represent increase the volume and strength of the weld joint. As the reduction the potential threat and waste to the earth. electrode is moved along the joint, the molten weld pool Friction Stir Welding (FSW) is a new kind of welding solidifies in its wake. method that was invented by The Welding Institute (TWI). It is different from conventional welding methods and also Resistance Welding (RW) different from other old solid welding process. The method It utilizes a combination of heat and pressure to utilizes rotating welding tools to generate friction heat for accomplish coalescence. The heat required is generated heating the parent metal until the metal merge. The by electrical resistance to current flow at the interface of process is called Solid-state joining process, which is the two parts to be welded. original metal characteristics have not changes.
    [Show full text]
  • A Study on the Joining Technology of Copper-Aluminium Composite Heat-Dissipating Components
    Journal of Manufacturing Engineering, June 2021, Vol. 16, Issue. 2, pp 066-069 A STUDY ON THE JOINING TECHNOLOGY OF COPPER-ALUMINIUM COMPOSITE HEAT-DISSIPATING COMPONENTS *BIAN Yan-fei, SHI Jian-zhou, XIE Ming-jun, and CAI Meng The 54th Research Institute of China Electronics Technology Group Corporation, Shijiazhuang 050081, China ABSTRACT Copper-aluminium composite heat dissipation components have both the high thermal conductivity of copper and the low density of aluminium. Copper and aluminium are dissimilar materials as they have significant differences in physical and chemical properties, and hence it is not easy to weld them together. In this paper, the joining of copper to aluminium is studied by using the ultrasonic brazing technique. The results show that the copper and aluminium can be connected by ultrasonic brazing, and it is found that the bonding of the copper side interface is the weak link of the entire joint, but the joint strength can still reach 95MPa. Keywords: Copper aluminium composite structure, Radiator, Heat exchange, Heat sink, Ultrasonic brazing. composite structure, but the strength and rigidity are 1. Introduction low, and it is not easy to ensure the tightness of the water channel. With the development of electronic devices The ultrasonic brazing method[9] is suitable for towards high frequency and integration, the rapid dissimilar welding materials such as aluminium and increase of heat production will inevitably bring urgent copper. Because of its unique welding method and demand for heat dissipation [1,2]. Aluminum does not flexibility of operation, ultrasonic brazing can complete conduct heat fast enough to transfer heat from the inside the precision welding of unique and complex structures.
    [Show full text]
  • Aluminium Fusion Welding
    EAA Aluminium Automotive Manual – Joining 2. Characteristics of aluminium in fusion welding Content: 2. Characteristics of aluminium in fusion welding 2.0 Introduction 2.1 Welding of aluminium 2.1.1 The aluminium oxide film 2.2 Weld preparation 2.3 The welding zone 2.3.1 Solidification in the fusion zone 2.3.2 Crack formation in the fusion zone 2.3.3 Gas absorption and pore formation 2.4 Filler materials 2.4.1 Selection of filler materials 2.5 Shielding gases for welding aluminium 2.6 Joint design for fusion welding 2.7 Characteristics of the weld zone 2.8 Imperfections in fusion welds 2.9 Work environment and safety 2.10 Simulation of fusion welding Version 2015 ©European Aluminium Association ([email protected]) 1 2.0 Introduction Fusion welding of wrought and cast aluminium components is a key joining technology in automotive engineering. Fusion welding is characterised by partial melting of the work pieces to form a molten metal pool that solidifies and results, after subsequent cooling, in a firm joint. For quality reasons, a filler material is added sometimes. Different energy sources are used to produce the weld, including electricity, laser, electron beam and friction. Various fusion welding processes have been adapted or specifically developed for fusion welding of aluminium which are described in subsequent chapters: - 3. Arc welding - 4. Beam welding - 5. Resistance welding - 6. Brazing - 7. Solid state welding. The present chapter considers some general aspects of the various fusion welding methods. In order to achieve sound and efficient weld joints of aluminium parts, the choice of joint design, welding parameters, procedures and processes must consider: Welding characteristics of the alloys to be joined Characteristics of the applied fusion welding process Joint configuration and surface characteristics of the joining zone (weld preparation).
    [Show full text]
  • Non-Fusion Joining of Aluminium
    Non-fusion joining of aluminium P. BASAK, B. K. SAXENA and B. N. DAS OINING of aluminium is now a well established SYNOPSIS J technology. Successful joining can be done by TIG and MIG welding, pressure welding processes, This paper deals with various processes for non fusion brazing and soldering processes. Conventional fusion joining of aluminium . The processes of soldering have processes of joining aluminium are well known and are been dealt in details suggesting various soft solder flux widely used in India by all major fabricators. On the combinations , hard solder flux combinations for flux other hand, though non-fusion joining processes like soldering , friction soldering and reaction soldering. Brief soldering, brazing and pressure welding have wide field details of brazing alloys and fluxes have also been given. of applications the correct process and material required Usefulness of pressure welding in joining electrical are not very well known ; as such there is a specific conductors and other small items has been discussed need in India, at present, to disseminate the knowledge giving details of the process and types of pressure welding on joining of aluminium especially by these processes equipments available commercially . Brief mention has been which a small fabricator can handle. made to newer processes like ultrasonic and explosive Since small industries are called to fabricate com- joining. ponents from commercial grade aluminium only and most of the fabrications, by such fabricators, are that the joint does not require a high strength like a welded aluminium is attributed, as mentioned earlier, to a joint, attention has mainly been focussed to the soldering tenacious oxide layer which forms very rapidly and processes.
    [Show full text]
  • EAA Aluminium Automotive Manual – Joining
    EAA Aluminium Automotive Manual – Joining Content 1. Introduction 2. Characteristics of aluminium in fusion welding 3. Arc welding 4. Beam welding 5. Resistance welding 6. Brazing 7. Solid state welding 8. Mechanical joining 9. Adhesive bonding 10. Hybrid joining 11. Joining dissimilar materials Version 2015 ©European Aluminium Association ([email protected]) 1 1. Introduction Joining is a most important fabrication technology in automobile manufacturing. The standard joining technique for the production of conventional steel car bodies has been resistance spot welding. With the advancement of new, innovative joining technologies and the simultaneous introduction of high and ultra-high strength steel grades, additional joining methods have found limited application. However, resistance spot welding still remains the dominating joining technique for steel cars. On the other hand, joining of aluminium components by resistance spot welding of aluminium presents some problems. When substituting steel by aluminium, the sensitivity of the mechanical properties of work-hardened and age-hardened aluminium alloys to heat input generated during the welding process and their specific physical characteristics ask for specific attention in design and engineering as well as production planning (equipment and process parameters). Consequently, the growing application of lightweight aluminium solutions in automobiles posed significant challenges both for the automobile manufacturer as well as for the supplier of the aluminium materials and components. The key enabler for the use of aluminium in automotive applications proved to be the series application of non-heat involving joining techniques like mechanical joining and adhesive bonding. Today, appropriate qualitatively outstanding and highly efficient joining methods are available for aluminium and will be described below in more detail.
    [Show full text]
  • Effects of Process Parameters Joining the Dissimilar Materials AA6082-T6
    Effects of Process Parameters Joining the dissimilar materials AA6082-T6 and AISI 316Ti by Friction Stir Welding Aluminium -Steel materials in butt joint Victor Mello Callil configuration Projeto de Graduação apresentado ao Curso de Engenharia Naval e Oceânica da Escola Politécnica, Universidade Federal do Rio de Janeiro, como parte dos requisitos necessários à obtenção de título de Engenheiro Orientador(es): Jean David Job E.M.Caprace Luciano Andrei Bergmann Marcelo Igor L. de Souza Rio de Janeiro Janeiro de 2020 FSWed DISSIMILAR ALUMINIUM/STEEL MATERIALS 6 mm THICK IN BUTT JOINT CONFIGURATION Victor Mello Callil PROJETO DE GRADUAÇÃO SUBMETIDO AO CORPO DOCENTE DO CURSO DE ENGENHARIA NAVAL E OCEÂNICA DA ESCOLA POLITÉCNICA DA UNIVERSIDADE FEDERAL DO RIO DE JANEIRO COMO PARTE DOS REQUISITOS NECESSÁRIOS PARA A OBTENÇÃO DE GRAU DE ENGENHEIRO NAVAL. Examinado por: Prof. Jean David Job E.M.Caprace Prof. Marcelo Igor L. de Souza Prof. Murilo A. Vaz Prof. Julio Cesar R. Cyrino RIO DE JANEIRO, RJ – BRASIL JANEIRO DE 2020 Mês de 2018 ii Callil, Victor Mello FSWed dissimilar aluminium/steel materials 6 mm thick in butt joint configuration / Victor Mello Callil – Rio de Janeiro: UFRJ/Escola Politécnica, 2018. Xii, 44 p.: il; 29,7 cm. Orientador(es): Jean-David J. E. M. Caprace Luciano Andrei Bergmann Marcelo Igor L. de Souza Projeto de Graduação – UFRJ / Escola Politécnica / Curso de Engenharia Naval e Oceânica, 2018. Referências Bibliográficas: p 58-61. 1. FSW 2. Dissimilar Joints 3. Butt joint configuration 4. Experimental Tests 5. AISI 316 Ti / AA 6082 – T6 I. Caprace, Jean David et al.II.
    [Show full text]