Power Semiconductor Highlights

Committed to excellence

V3.0

Discretes, Drivers, Switch Mode Power Supply ICs, Voltage Regulators, AC/DC & DC/DC Converters, Power Supplies & Modules Content

Introduction/Linecard ...... 3 – 5

Power Supplies ...... 6 – 7

DC/DC & AC/DC Converter Modules ...... 8 – 13

Voltage Regulators ...... 14 – 19

Switching Regulators ICs ...... 20 – 27

Protected MOSFETs ...... 28 – 37

Motor Driver ICs ...... 38 – 45

IGBTs ...... 46 – 49

Power MOSFETs ...... 50 – 58

Triacs ...... 59 – 61

Schottky Diodes & Rectifiers ...... 62 – 67

Modules ...... 68 – 73

RF / HF Transistors ...... 74

Our Product Portfolio Committed to excellence Consult – Know-how. Built-in. Displays Semiconductors & Boards The technical competence from Rutronik Worldwide and individual consulting on the spot: Passive Storage by competent sales staff, application engineers and Components Technologies product specialists.

Electromechanical Wireless Components Technologies Components – Variety. Built-in. The product portfolio from Rutronik

Wide product range of semiconductors, passive and electromechanical components, storage, displays & boards and wireless technologies for optimum coverage of your needs. Follow us: Logistics – Reliability. Built-in. https://www.facebook.com/rutronik The delivery service from Rutronik Innovative and flexible solutions: from supply chain management https://twitter.com/Rutronik to individual logistics systems.

https://www.youtube.com/user/Rutronik24 Quality – Security. Built-in. https://rutronik-tec.com Quality management without compromise The integrated management system (IMS) encompasses quality control, environmental protection and occupational health Get your Rutronik App: and safety.

Rutronik – Power Expertise meets Innovation

Many customers already know and appreciate Rutronik as a reliable partner with great expertise in power semiconductors and both an innovative and well-balanced portfolio. This brochure gives you an overview of our broad product portfolio as well as the latest, most advanced products in terms of power management. The power semiconductor market is still very dynamic with a high innovation rate due to the ever higher requirements of new applications with respect to regulation on the components. There is a drive to improve effiency in Andreas Glaser power management systems thanks to new proven technolo- Senior Marketing Manager Power Semiconductors gies like Galium Nitirid, J-FET and Silicon Carbide products.

Power goes SMART Applications are frequently mobile solutions and are therefore battery-powered. Rutronik supplies innovative energy- efficient power supply systems including power management ICs. Please be invited to join us and benefit from the partnerships that we have developed over many years with our leading global partners in the power semiconductor industry, including Infineon, STMicroelectronics, Recom, Renesas, Rohm, Microchip, Vishay, Diodes, BYD and Intersil.

Linecard

Power Semiconductors BYD Delta Diodes Inc. Diotec Fagor FSP Infineon Technologies International Rectifier (IFX) Intersil LiteOn Littelfuse Melexis Microchip Micrel Murata NJRC Panasonic Pan Jit Recom Renesas Rohm/Lapis/Kionix Shindengen STMicroelectronics Toshiba Vincotech Vishay Wahhing ZMDI

Power Supply Battery Charger ICs 1 1 x 1 1 1 1 1 Converter Modules (AC/DC & DC/DC) 1 1 x 1 1 1 1 1 1 1 LED / LCD Drivers x x x x x x x x x x x Switching Regulator ICs (AC/DC & DC/DC & PFC) 1 1 x 1 x 1 x 1 1 1 1 1 1 Wireless Charging ICs x x x Voltage Regulators 1 1 1 1 x 1 1 1 1 1 SMPS 1 1 x 1 Smart Power Products Protected MOSFETs & Drivers 1 1 x 1 1 x 1 1 1 1 1 1 Motor Drivers 1 1 x 1 x 1 x 1 1 1 1 1 Discretes Components Thyristors 1 x 1 1 1 1 1 Triacs 1 1 1 Trigger Diodes (DIAC) 1 1 1 Fast Recovery Diodes 1 1 1 1 1 1 1 1 1 1 1 Schottky Diodes 1 1 1 1 1 1 1 1 1 1 1 Transistors x x x 1 x x x x IGBTs/IGBT Modules 1 1 x 1 x 1 1 1 1 MOS Transistors 1 1 x x 1 1 x 1 1 1 RF- & HF-Transistors 1 1 1 1

For more detailed information on the products, including datasheets, availability and prices, please visit our e-commerce platform: www.rutronik24.com

3 RUTRONIK We cover your complete ...

4 POWER SEMICONDUCTORS

We cover your complete ... Product....PROD CycleUCT CYCL E ...A SegmentsPPLICATION SEGMENTS

CONCEPT DESIGN YOUR SMART PRODUCTS ■ Product Specification ■ Target Costing ■ Technical Support ■ Samples & Evaluation Boards

DESIGN ■ Product Qualifications/Documentation COMBINE TECHNOLOGIES – REALIZE SMART DESIGNS ■ Reference Designs ■ Pre-Series ■ Direct Supplier Support

PRODUCTION ■ Cost Optimization ■ Availability

■ Automatic Processing DISCOVER INNOVATION IN MOTION ■ Logistic Solutions & Traceability Information

SERVICE ■ PCN / PTN Support ■ Last-Time-Buy (LTB) Handling ■ Workshops & Seminars ■ Webg@te

NEW ON BOARD:

5 Power Supplies

Power Supply Units

A power supply is a hardware component that supplies power to an electrical device. It converts main AC- to low regulated DC power for the internal components of an electrical system. The power supply is an integral part of electrical system and supports all the power that is needed for the electrical function of any system. The supplier portfolio has a wide range of different packages and power classes as well. Rutronik offers a large variation from leading suppliers like Delta Energy Systems and Murata Power Solutions for applications in the field of Tele/Data communication, computer systems, industrial, office equipment, transportation, medical and Power Distribution applications. There are also options for redundancy and customized designed power supplies. Wah Hing is a specialist for customized solutions.

Standard Power Supplies 1U Front End Power Supply

Suppliers FSP Murata RECOM

Series MVAB MVAC MVAD D1U2 D1U3CS D1U54P D1U

Power

Low Power (10W-100W)

Mid Power (100W-1000W)

High Power (>1kW)

Output Voltage

5 V

12 V

24 V

48 V

Others

Cooling

Convection

Internal Fan

Conduction

Features

Over Voltage Protection

Over Current Protection

Over Temperature Protection

PMBus™ I2C Interface

Package

Open Frame

Panel Mount

Adapter

Applications

Tele/Data Com

Computer Systems

Industrial

Office Equipment

Transportation

Medical

Power Distribution Applications

Customized Power Supply Solutions 6 AC/DC Power Supplies

With design centers and ISO 9001:2000 registered manufacturing facilities on three continents, Murata PS is able to produce power supplies to the highest standards in terms of power, performance, efficiency, protection, approvals compliance and cooling for a multitude of application requirements. In addition to an expanding offering of standard models, MPS has a long and proud history of designing custom solutions to meet even the most stringent and challenging requirements.

MVAD- MVAB-Series - Medically approved AC-DC Open Frame Power Supplies Features Specifications ■ Highly reliable, clean design ■ 2” x 4” low profile standard footprint ■ Remote sense (MVAD065) ■ High efficiency up to 91% ■ Universal AC input ■ Convection-cooled operation up to 75W ■ ITE (2nd) and medical 3rd ed. safety ■ Less than 0.3W no load input power (MVAD065 (MVAD065 and MVAD040) and MVAD040) complies with ErP/Energy Star requirement

Model Number Natural Convection Forced Air Load Input Output EEfficiencyfficiency Cooling Cooling Current Voltage Voltage MVAD040-12 0 to 3.34A 12Vdc 87% 90-264Vac MVAD040-24 40W 0 to 1.67A 24Vdc 88% 120-300Vdc MVAD040-48 0 to 0.84A 48Vdc 89% MVAD065-12 0 to 5.0A 12Vdc 88% 90-264Vac MVAD065-24 65W 0 to 2.71A 24Vdc 89% 120-300Vdc MVAD065-48 0 to 1.36A 48Vdc 90% MVAB120-12 0 to 10.0A 12Vdc 88% 120W 90-264Vac MVAB120-24 75W 0 to 5.0A 24Vdc 90% @250LFM 120-300Vdc MVAB120-48 0 to 2.5A 48Vdc 91%

MVAC Series - Medically approved Highly Efficient Open Frame

Features Specifications ■ 3rd ed. Medical and ITE safety approved ■ 3” x 5” x 1.4” standard footprint ■ Remote sense ■ High efficiency up to 94% ■ Remote on-off and PS_OK (Aux output models) ■ Convection-cooled operation up to 250W ■ Isolated 12W fan available and 10W standby ■ Active inrush protection (on Aux output models) ■ Current sharing option available

Model Number Natural Convection Forced Air Main Output Fan Output Aux Output Typical Cooling Cooling (V1) (V2) (V3) Efficiency

MVAC250-12 12Vdc 93% 250W MVAC250-24 170W 24Vdc 12V 93% @250LFM MVAC250-48 50Vdc 5V on Aux output 94% MVAC400-12 12Vdc models 93% 400W MVAC400-24 250W 24Vdc 12V 93% @250LFM MVAC400-48 50Vdc 94%

7 DC/DC & AC/DC Converter Modules A DC/DC converter module is an electronic circuit which converts a source of direct current called DC from one voltage level to another one. The isolation of the DC/DC converter module allows the electronics design engineers to comply with the safety regulations and solve issues such as interferences and failure protection and helps to speed up any development and certification process. An AC/DC converter module converts main AC- to low regulated DC power for the internal components of an electrical system. It is an integral part of electrical system and supports all the power that is needed for the electrical function of any system. AC/DC and DC/DC converter modules offer a flexible and clean solution to Distributed Power Architecture systems in the lower range of power. Rutronik offers a strong portfolio of leading suppliers like RECOM, Murata Power Solutions and Delta for applications in the field of industrial, transportation, medical, energy, aerospace and communication segment. Murata RECOM Delta DC/DC Converter Modules Power Very low (<1W) Low (1W-10W) Power Medium (10W-60W) High (60W-400W) High Power RACM65, RACM100, UWE, HPQ, UCQ, UQQ, V48SC, E24SR, E36SC, E36SR, Isolation (60W-400W) RACM150, REDIN120 ULQ, UVQ, UWQ, HPH, E48SC, E48SH, E48SP, E54SD, 100W UCH, RBQ, PAQ, PAH, Q36SR, Q48SA, Q48SC, Q48SQ, Low (< 3kV) ULS, RBE Q54SG, H36SA H48SA, H48SC, Medium (3 kV-8 kV) HA1SV, B40SR, B60SR, B70SR, BACSR High ( 8kV-10kV) Mid Power REC10, REC10-M, REC15-M, UEI15, UEI25, BEI15, T48SR, V36SE, V48SC, V48SH, None (10W-60W) REC20, REC30, RP10-E(W), NPH10, UWR, BWR, V48SR, E24SR, E48SC, E48SH, RP15-OF(W), RP15-A(W), TWR, NPH15, UEI30, E48SR, S36SE, S48SP, S24SP, Regulation RP20-A(W), RP30-F(W), UEI-50/60, UHE, ULT, AA15S, AA15D, AA30S, AA30D, Regulated RP40-G(W), RP60-G, RPM(D), ULS-30, ULS-60, UWS, AA60S, AB24S, AB24D, AB40S, RPPxx(W), RPPxx-B(W), UCE, ULE, UEE, UCQ, AB40D, AB60S, AA15T, AA30T Unregulated RPRxx-B, RAC10-C/277, ULQ, UCH, NCS12 RAC15-B, RAC20-B, Temperature Range RAC30-A, REDIN45, RAC48/OF, Normal (<85°C) RACM40, REDIN 60, RAC60/OF, RAC60-B High (>100°C) 10W Low Power R1DA, R1S/R1D(/E), R1SE, NKE, NME, NMJ, NMR, DA01S, PA01S, PB01S, PB01D, Custom DC/DC (1W-10W) RO(/E), ROE, RAM, ROM, MER1, NMV, MEV1, PD01S, PD01D, PF01S, PI01S, RNM, RB/RE(/E), RBE/ MEA1, NKA, NMA, PI01D, PL01S, PL01D, SA01S, REE, RBM, RK/RH, RP, RTM, MTU, NTA, NTE, NTV, SA01D, SB01S, SB01D, SH01S, Possible Applications RxxPxx(/R), RU, RUM, RN, NTF, PWR13, NML, SH01D, SK01S, SK01D, DB02S, R2S/R2D, RI, RD, RKZ, MEJ2, NMG, NMK, DB02D, DC02S, DC02D, DK02S, Industrial RxxP2xx(/R), RUZ, RJZ/RGZ, NMH, NDL, NMS, NTH, DK02D, PC02S, PC02D, PG02S, Transportation RV(/R), RAZ, R1Z, RY, RSO, MEE3, MEV3, NDH, PH02S, PH02D, SC02S, SC02D, RS, RW2, RS3, RW, REC3, UST, BST, UWR, NDY, SD02S, SD02D, SG02S, SG02D, Medical REC3.5, REC5, REC6, REC8, NDTS, NDTD, NDS6, DD03S, DD03D, DL03S, DL03D, Energy RP08-A(W), REM3, REM6, NCS6, UWR, BWR, DM03S, DM03D, DN03S, REM10, RAC01-C, RAC02-C, TWR, MEJ1, MTE1, DN03D, PJ03S, PJ03D, SE03S, Aerospace RAC02-SE/277, RAC03-C, OKR, NXE1, MGJ2, SE03D, DF04S, DF04D, SF05S, RAC02-SE/277/W, RAC03- MGJ3, MGJ6, MTC1 SF05D, DH06S, DH06D, DJ06S, Communication SE/277/W, RAC03-SER/277, DJ06D, DU06S, DU06D, DT10S, Military RAC04-SC/W, RAC04-C, DT10D, AA04S, AA04D, AA07S, 1W RAC04-C/230, RAC04- AA10S, AC02S, AC02D Building C/277, RAC05-B, RAC06-C Lighting Very Low RM, R0.25S/R0.25D/ LME, CME Power R0.25DA, ROL, R0.5Z Case (<1W) 0.25W Plastic Metal baseplate Metal ripped Packages New Products 2015/16 Open frame Unregulated DC/DC Converter Modules Regulated DC/DC Converter Modules Miniature Industrial Package Regulated DC/DC Converter Modules (High Temperature) Industrial package AC/DC Converter Modules Others Brick AC/DC Converter Modules AC/DC-Converter modules from 1W up to 150W

8 RECOM Step Down Switching Regulators Murata PS Non-Isolated Programmable Output DOSA PoLs Suppliers

Modules 4.75-32 4.75-18 4.75-18 1 1.8,2.5,3.3,5 4.75-18 4.75-32 2.4-5.5, 2.4-5.5, 2.4-5.5, 2.4-5.5, 15, 24 4.5-28 4.5-18 0.5 3.3,5,9,12 6.5-32 0.591-6 1 4.5-14 4.5-14 0.9-5.5 2.9-14 8.3-14 8.3-14 8.3-14 5, 12, 36-72 94 .2-553 5.021-15.5 19-40 16-40 9-32, -633 0.5 3.3,5 5-36 0.5 3.3,5 9-72 6-28 7-28 9-32 1 3.3,5,12 1 7-42 7-42 3.3,5 8-28 5-42 1.5 3.3,5 7-36 Vin (V) 3.3, 0.591-5.5 3.3, 5,6.5,9, 3.3, 5,6.5,9, 3.3, 5,6.5,9, 3.3, 5,6.5,9, 1.8, 3.3,5,9, 3.3, 5,6.5,9, 0.6-3.63, 0.6- 1.5, 1.8,2.5, 1.5, 1.8,2.5, 1.8, 2.5,3.3, 1.2, 1.8,2.5, 1.5, 1.8,2.5, 1.5, 1.8,2.5, 0.7525-3.63, 0.7525-3.63, 0.7525-3.63, 0.7525-4.5, 0.7525-5.5 0.7525-5.5 0.7525-5.5 12, 15,24 3.3, 5,6.5 55~135, 40~120, 0.75-5.5 95~210 5, 9,12 12, 15 12, 15 12, 15 12, 15 12, 15 3.3, 5 3.3, 5

0.5 5 Vout (V) 0.25, 2, 3, 3, 6, 3, 4 1, 2 4, 5 3, 5 3, 6 0.3 0.5 0.5 0.5 1.5 10, 10, 16 16 10 2, 1 1 3 1 Iout (A) ROF-78E R-78HB24-0.3 R-78HBxx-0.5 R-78xx-0.5 Rxx-B R-78AAxx-0.5 R-78E R7xxxP/D R-6xxxP/D R-5xxxPA/DA R-78Txx-1.0 R-78xx-1.0 R-78E-1.0 R-78Cxx-1.0 R-78W-0.5 R-78AAxx-1.0SMD Series OKL-T/1-W12 OKI-78SR Series OKI-T/36W-W40 Series OKI-T/3-W32 andW40Series R-78Bxx-1.5 R-78Bxx-1.0 OKY-T/10 &T/16Series OKY-T/3 &T/5Series OKX-T/10 &T/16Series OKR-T/3, T/6,andT/10Series OKL-T/3 &T/6Series

6 Modules DC/DC &AC/DCConverter

8 Iout (A)

15 9

16 Modular DC/DC Converters: In House Design Is No Longer Justified

System designers no longer attempt to design the switching power supply Reality is however quite different. With switching transistors, capaci- in house, as this requires in depth analogue knowledge, no longer avail- tors, transformer, rectifier and filter we are in an analogue world, where able in development laboratories. Saturation curves of ferrite cores have things are neither black nor white. The length of pcb tracks, their distance to be taken into consideration as well as their behaviour with changing to other tracks, and proximity to other components generates parasitic temperatures and frequencies. Often data is only available for sinusoidal capacitances and inductances, which can not be identified in circuit dia- operation, switching regulators operate with square signals, not without grams. The transformer can also prove quite problematic. Its functiona- consequences, affecting EMC behaviour of the complete product. It is the- lity depends on the ferrite material and where on the saturation curve it refore not surprising that this sensitive issue is left to specialists. operates. If operated to close to “saturation” it heats up and its magnetic behaviour deteriorates. All of this affects efficiency and EMC compatibili- There are two reasons why this does not apply to the same extend to DC/ ty, often requiring a redesign. These fundamental issues have been known DC converters. They operate on the input side with relatively low voltages for the past century, but are now only barely known. that can be handled easily, and they are part of the circuit board and there- Design and development managers must therefore consider carefully fore can be mounted together with the rest of the pcb components. whether it pays to go for an in house development, or rely on readily available standard modules. If the design team has the knowledge and the The circuit layout also appears quite simple at first. Two FETs on the pri- specific experience it knows the pit falls and can avoid them. It is open to mary side chop the DC voltage on the input with 100kHz plus, a small doubt whether an optimised design can be achieved. A leading manufac- toroidal transformer generates the required voltage and provides isolation. turer, such as RECOM, invests more than 80% of development time into The output voltage is subsequently rectified and smoothed. A number of design optimisation and life time testing. A customer, designing a discrete programmes make the design seemingly simple, at least in theory. solution is unlikely to invest an equal amount of effort.

WE POWER YOUR PRODUCTS www.recom-electronic.com 10 When RECOM started to develop their first DC/DC-converters more than a quarter century ago, nobody could imagine their wide-spread use in electronics today. As one of the pioneers in this market RECOM covers the power range from 0.25 - 60 Watts - with highly specified and reliable products. Whether regulated or unregulated, isolated to 10kVDC, or laid out for extremely high ambient temperatures of +100°C. RECOM offers a suitable portfolio of converters for every application.

Low Power SMD DC/DC Converter Switching Regulator Module R0.25S/D, R0.5S/D, R1S/D, R2S/D, R1DA, R1SE, R0.5Z, R1Z R-78xx, R-78AA, R-78C, R-78B, R-78HB, R-78/W, ROF-78E, ■ Low power SMD DC/DC converters R-78E, R-78T-1.0, R-5xxx, R-6xxx, R-7xxx ■ R0.25S/D/DA, R0.5S/D, R1S/D, R2S/D/DA, R0.5Z, R1Z ■ 8:1 input voltage range up to 72V ■ 0.25 to 2 watt SMD converters ■ High efficiency up to 96% ■ Single, Dual or Isolated Dual Output ■ Replacement for standard linear regulators ■ Regulated and unregulated ■ TO-220 compatible SIP case, SMD or wired ■ Very compact size ■ Tight regulation (+/-0.5%) and low noise ■ Up to 3kV isolation ■ Operating temperature -40°C and +85°C ■ Operating temperature -40°C to +100°C ■ Remote ON/OFF control ■ EN/UL certified ■ EN certified, 3 year warranty ■ 3 year warranty Low Power AC/DC for Energy Saving Premium DC/DC for Industry Applications ■ DIN-Rail, RAC01, RAC02, RAC03, RAC04, RAC05, RAC06, REC3, REC5, REC8, REC10, REC10/M, REC15/M, REC20, REC30 RAC10, RAC03-SCR, RAC03/W, RAC04/W, RAC05/W, RAC06/W ■ 3 to 30 watt in compact packages ■ 1, 2, 3, 4, 5, 6 & 10 watt in ultra-compact package ■ Industry standard pinouts ■ Wide input range (85-305VAC / 110-430 VDC) ■ 2:1 & 4:1 inputs ■ Class II power supply (3kVAC isolation) ■ Isolation up to 6kVDC ■ Operating temperature -40°C to +85°C ■ Short circuit protection ■ 3.3V to 24V with Single or Dual Output ■ EN/UL certified ■ Optional DIN rail mounting kit ■ 3 year warranty ■ Low no-load consumption (starting with 30mW) ■ EN/UL certified, 3 year warranty High Isolated Reinforced DC/DC RxxPxx/R, RxxP2xx/R, RV/R, REC3.5/R, REC6/R AC/DC Power for Medical Applications ■ Ultra-compact design RACM40*, RACM65*, RACM100, RACM150 - 1 & 2 watt in SIP7 package ■ Space saving 3“x2“ or 4“x2“ case - 2, 3.5 & 6 watt in DIP24 package ■ Universal input voltage range (85-264VAC / 120-370VDC) ■ Reinforced isolation up to 10kVDC ■ 2 MOPP for patient safety ■ Efficiency up to 86% ■ Reinforced isolation 4kVAC/1min ■ Operating temperature -40°C to +85°C ■ Active PFC – efficiency up to 92% ■ EN/UL certified ■ UL/IEC/EN 60601 3rd Ed and CE marked ■ UL60601-1 3rd Ed. Medical approved ■ 5 year warranty ■ 3 year warranty AC/DC Din Rail Power Supplies High Isolated DC/DC for IGBTBT REDIN45, REDIN60, REDIN120* RH, RP, RxxPxx, RxxP2xx, RKZ, RGZ, RV ■ Compact 45W to 120W models, 24V or 12V output ■ Asymmetric dual output +15/-9V ■ High reliability components to guarantee a long, trouble-free life ■ Compact design ■ Universal input voltage range ■ High isolation up to 6.4kVDC (80-264VAC / 120 – 370VDC) ■ Extreme low isolation capacity ■ ErP compliant (<0.5W) ■ Efficiency up to 86% ■ Fully protected: OVP / OCP / SCP / OTP ■ Operating temperature -40°C to +85°C ■ UL / IEC / EN 60950-1 (CB),

■ EN certified UL 508 and CE marked *Coming in Q4/2015 ■ 3 year warranty ■ 7 year warranty 11

DC/DC Converter Highlights

Murata Power Solutions is one of the world‘s largest suppliers of DC/DC converters. The main benefits of Murata Power Solutions are reliability, efficiency and cost-effectiveness. Their unique ability to blend proven circuit topologies, high-performance components, contemporary SMT construction and highly automated assembly brings you exceptional quality products, from standard off-the-shelf models to modified products and complete custom designs in a high grade of performance.

MEJ2 Series - Extends Power Rating of 5.2 kV PAH & PAQ Series - Isolation Miniature DC-DC Converters Developed for Power Amplifiers PAH Half-Brick isolated, 350-Watt, DC-DC Converter ■ 5.2kVDC isolated ■ UL60601 3rd edition ■ Outstanding thermal ■ No output reverse conduction 2W DC-DC converters ■ 5200VDC isolation test voltage per formance ■ Input to output isolation, ■ Class leading efficiency at ■ Encapsulated for superior ■ Standard baseplate for con- 2250Vdc low loads thermal performance duction cooled applications ■ Input under-voltage lockout ■ UL60950 basic/supplementary insulation PAQ Quarter-Brick isolated DC-DC Converter with 2:1 wide Input Range Applications ■ Input voltage range of 36-75V ■ DOSA compatible 1/4 brick ■ Medical ■ Industrial (48V nominal) package (0.46” high) ■ IGPT Drivers ■ Instrumentation and control ■ Output of 29.8V at 5A ■ Remote On/Off control Model Number Input Voltage Output Voltage Efficiency Typical ■ High efficiencies (92.5%, typical) MEJ2S0303SC 3.3V 3.3V 70% MEJ2S0305SC 3.3V 5V 74% MEJ2S0503SC 5V 3.3V 70% Applications MEJ2S0505SC 5V 5V 75% ■ Telecommunication ■ Power Amplifiers MEJ2S0509SC 5V 9V 78% Model Number Input Voltage Output Voltage Power Efficiency MEJ2S0512SC 5V 12V 77% PAH-28/12.5-D48 36-75V 28V 350W 93% MEJ2S0515SC 5V 15V 79% PAH-28/16-D48 36-75V 28V 350W 93.5% MEJ2S1203SC 12V 3.3V 73% PAH-53/8.5-D48 36-75V 53V 450.5W 94% MEJ2S1205SC 12V 5V 78% PAQ-29/5-D48 48V 36-75V 29.8V 150W 92.5% MEJ2S1209SC 12V 9V 79% MEJ2S1212SC 12V 12V 80% MEJ2S1215SC 12V 15V 80% MEJ2S1505SC 15V 5V 76% EMH-54 Series - Efficient Power-over-Ethernet for MEJ2S1509SC 15V 9V 78% 24/48/60V battery systems MEJ2S1512SC 15V 12V 79% MEJ2S1515SC 15V 15V 78% Isolated, 54Vout, 3A, Ethernet Power Half-Brick DC-DC Converters ■ PoE compliant ■ Optional baseplate ■ 18V - 72Vin Range ■ 91% efficiency ■ 54Vout @ 3A (162W) ■ Industry-standard Half Brick ■ 2250Vdc input to output isolation footprint

Applications ■ Telecommunication ■ Datacom ■ Power-over-ethernet ■ Networking applications Model Input Output Output Output Efficiency Number Voltage Voltage Current Power EMH-54/3–Q48 18-72V (48V typ.) 54V 3A 162W 91.5%

12 Industrial DC-DC Modules

B62SR/B40SR/B70SR Series DC/DC Converter S24SP Series DC/DC Converter For the box type DC/DC solution B62SR/B40SR/B70SR, Delta leads With the launch of the 60W S24SP, Delta pioneers in providing the the industry in providing an ultra-wide input range solution for highest power density of up to 93% for industrial input range in a off-road electric powered vehicles. Delivering up to 360W output 2”X1” isolated power converter. Created by Delta‘s worldwide R&D power, this innovative box type solution provides the highest effici- teams the power converter comes with optimized component place- ency of up to 89%, better than all competing products. It also helps ment, innovative design topologies, and a host of industry-standard customers save inventory cost by reducing various DC/DC model features. numbers that had to comply with counterpart battery types in the past. Meeting UL60950-1 safety requirements, the S24SP can sustain up to 1500VDC isolation voltage and has an operating temperature of The B62SR/B40SR/B70SR family meets the UL60950-1 safety -40°C to +85°C. It is suitable for customers’ critical applications such standard and has the CE mark. It is suitable for all industrial and as process control and automation, transportation, data communi- commercial electric powered off-road vehicles such as forklift trucks, cation and telecom equipment, test equipment, and medical devices electric motorcycles, ground support equipment, golf carts, and and equipment. Lower output power modules are also available to sports equipment vehicle. meet a variety of requirements.

Features Features ■ Output power 200W/300W, ultra wide input range ■ Wide input voltage range (9-36Vdc) - B40SR: Up to 300W output power with an input range of 18-60V ■ High efficiency up to 93% - B62SR: Up to 360W output power with an input range of 18-106V ■ Compact footprint (2”x1”) - B70SR: Up to 300W output power with an input range of 36-106V ■ Encapsulated in metal case ■ Single output voltages including 12.4V/13.5V/24.0V output ■ No tantalum capacitor used S24SP ■ Typical efficiency of up to 89% ■ Fully encapsulated, waterproof, isolated DC-DC power converters ■ Industry-standard features: over-voltage protection, over-temperature protection, input reverse polarity protection, integrated fuse holder, IP67 protection, parallel application, and more

B40SR

Vin Vin Series Max Output Voltage nominal Range Power 1V 1.2V 1.5V 1.8V 2.5V 3.3V 4.2V 5V 6.5V 9V 12V 15V 24V 28V 48V 54V 24V 9~36V S24SE 30W x x x x S24SP 60W x x x x 24/36/48V 18~60V B40SR 300W x x 24/48/72/80V 18~106V B62SR 360W x x x 48/72/80V 36~106V B70SR 300W x x x

13 Voltage Regulators

Voltage Regulators

Rutronik offers a comprehensive portfolio of linear voltage regulators fitting a broad range of automotive, industrial and consumer applications from the world’s biggest and leading supplier. We are an experienced long-term Distributor in power parts for all kinds of applications.

We are continuously expanding our portfolio to meet our customers‘ present and future application requirements.

Diodes Inc. Infineon Intersil Microchip Micrel NJRC ROHM ST Toshiba ZMDi

Linear Regulators

Positive

Negative

LDOs

Industrial

Automotive

14 TO263-3

SOT223-4

TO252-J5 Voltage Regulators TO263-5 Automotive-Grade LDO Regulators BD4xxMx / BDxxC0A Series

Comprehensive LDO regulator lineup for automotive applications (43 types) ROHM offers a total of 43 different types of LDO regulators suited for automotive applications, including the BD4xxMx series designed for general electronic systems and the BDxxC0A series optimized for car infotainment. The BD4xxMx series features less than half the (no-load) current consumption of existing products, resulting in significant energy savings in automotive systems. In addition, both series are compatible with ceramic capacitors, eliminating the need for large capacitance electrolytic capacitors for oscillation prevention, contributing to end-product miniaturization. Diodes Inc. Infineon Intersil Microchip Micrel NJRC ROHM ST Toshiba ZMDi

Linear Regulators Low Current Consumption contributes to greater Energy savings Compatible with Ceramic Capacitors

Positive Stable operation even when using low ESR ceramic Negative capacitors for oscillation prevention LDOs

Industrial

Automotive

For MCU Applications in Body and Powertrain Systems ■ FI ■ HEV/EV Inverters BD4xxM2 Series (45V Breakdown/200mA) BD4xxM5 Series (45V Breakdown/500mA) ■ TPMS Output Voltage (typ.) Package Output Shutdown Output Voltage (typ) Package Output Shutdown 3.3V 5.0V Switch Function 3.3V 5.0V Switch Function ■ BCM BD433M2WFP3-C BD450M2WFP3-C SOT223-4 BD433M5WFPJ-C BD450M5WFPJ-C TO252-J5 ■ Smart Keys BD433M2WEFJ-C BD450M2WEFJ-C HTSOP-J8 BD433M5WFP2-C BD450M5WFP2-C TO263-5 ■ HUDs BD433M2FP3-C BD450M2FP3-C SOT223-4 BD433M5FP-C BD450M5FP-C TO252-3 ■ LCD Monitors BD433M2EFJ-C BD450M2EFJ-C HTSOP-J8 BD433M5FP2-C BD450M5FP2-C TO263-5 ■ Cluster Systems

For Power Supplies in Information Systems (Various Output Levels/Package Types) BDxxC0A Series (35V Breakdown/1A)

Output Voltage (typ.) Output Shutdown Package 3.3V 5.0V 8.0V 9.0V Variable Switch Function BD33C0AWFP-C BD50C0AWFP-C BD80C0AWFP-C BD90C0AWFP-C BD00C0AWFP-C TO252-5 ■ Audio/navigation BD33C0AFP-C BD50C0AFP-C BD80C0AFP-C BD90C0AFP-C - TO252-3 systems BD33C0AWHFP-C BD50C0AWHFP-C BD80C0AWHFP-C BD90C0AWHFP-C BD00C0AWHFP-C HRP5 ■ ETCs and the like BD33C0AHFP-C BD50C0AHFP-C BD80C0AHFP-C BD90C0AHFP-C - ■ Other applications BD33C0AWFP2-C BD50C0AWFP2-C BD80C0AWFP2-C BD90C0AWFP2-C BD00C0AWFP2-C TO263-5 such as heated seat BD33C0AFP2-C BD50C0AFP2-C BD80C0AFP2-C BD90C0AFP2-C - TO263-3 controls

15 Infineon‘s Power Supplies Address a broad Range of Automotive Applications

Infineon offers a comprehensive portfolio of linear regulators and voltage trackers, fitting a broad range of automotive applications and is the global market leader with over 15 years of experience in the automotive regulator segment. Infineon continuously expands their portfolio to meet the customers present and future application requierements. Infineon automotive voltage regualtors are especially designed for use in harsh enviroments and are offered in the highest quality level. The robust design approach ensures delamination-free ICs and long-term reliability.

Automotive Linear Voltage Regulators Portfolio

TLE42xx4, TLE72xx-2 TLF80511xx TLE46xx TLS805xx ■ Vin: 3.3V-45V (some products TLS810xx up-to 65V) TLS820xx/50xx ■ Iout: 20-550mA ■ Vin: 3V-45V ■ Various features and protections ■ Iout: 50-500mA ■ Ultra low quiescent current ■ Only 1µF output cap ■ Ultra-fast regulation loop

TLE425x TLF1963xx ■ Vin: 3.5V-45V TLS202xx ■ Iout: 50-400mA TLS203xx ■ Reverse protection TLS205xx ■ Accurate current limit TLS208xx ■ Vin: 2.3V-20V ■ Iout: 150-1500mA TLF4277-xx ■ Regulator with monitoring features ■ Fast reaction time TLE4247xx ■ Constant current driver ■ Low noise

Product name Package Maximum Max Output Output Voltage Accuracy Feature Set Quiescent Comment Input Current Current Voltage TLS202A1MBV SCT595 18V 150mA 3.3V, 1,2V-5,25V 3% EN 50µA Linear post regulator TLS203B0EJV DSO8 EP, TSON10 20V 300mA 3.3V, 5.0V, 1,22V-18V 2% EN 30µA Linear post regulator TLS205B0EJV DSO8 EP, TSON10 20V 500mA 3.3V, 5.0V, 1,22V-18V 2% EN 30µA Linear post regulator TLS208D1EJ V DSO8 EP, TSON10 18V 800mA 3.3V, 2,7V-18V 2% EN, RES 90µA Linear post regulator TLS805B1SJV DSO8 42V 50mA 1,2V-42V 2% EN 6.5µA Ultra low qiescient current TLS810x1EJ Vxx DSO8 EP 42V 100mA 3.3V, 5.0V 2% EN,R 9µA Low qiescient current TLS820F0EL Vxx SSOP14 EP 45V 200mA 3.3V, 5.0V 2% EN, RES, WD 35µA Harsh environment TLS850F0TA V50 TO263-7 45V 500mA 5 2% EN, RES, WD 35µA Harsh environment

EN Enable | RES Reset | ADJ Adjustable Output Voltage | WD Standard Watchdog driver | WWD Window Watchdog driver www.infineon.com/voltage-regulators

16 Linear Voltage Regulators for Industrial Applications

Infineon offers a comprehensive portfolio of linear voltage Product Type Packages Regulator Output Accu- Max. Dropout Typical regulators fitting a broad range of consumer, computing, Type Voltage racy Output Voltage Quiescent Current Current communications and industrial applications. By leveraging IFX20002MB PG-SCT595-5 Linear 3.3, 5.0V 4.0 % 30mA 250mV 130µA Infineon`s long standing and market leading experience in IFX20001MB PG-SCT595-5 Linear 3.3, 5.0V 4.0 % 30mA 250mV 110µA automotive power supplies application, they are expanding IFX30081 PG-DSO-8 Linear adj. 0,02 50mA 100mV 300mV IFX21401MB PG-SCT595-5 Linear adj. 0.5 % 50mA 300mV 140µA their portfolio to provide power supply solutions to customer`s -> Tracker current and future applications. IFX4949SJ PG-DSO-8 Linear 5V 2.0 % 100mA 500mV 180µA IFX2931G PG-DSO-8 Linear 3.3, 5.0V 5.0 % 100mA 300mV 400µA IFX21004TN PG-TO220-5 Linear 5V/15V 5.0 % 100mA 5000/ 700µA V51 ->Multiple Applications Features output ■ Industrial & consumer ■ Low current consumption IFX54211MB PG-SCT595-5 Linear 3.3V 3.0 % 150mA 290mV 50µA V33 ■ Manufacturing & automation ■ Pin-to-pin compatible to IFX54441EJ PG-DSO-8, Linear adj., 3.3, 2.5 % 300mA 270mV 0.03mA ■ HDTV & Flat panel monitors industry standard parts TSON-10 5.0V IFX24401TE PG-TO252-5 Linear 5V 2.0 % 300mA 250mV 20µA ■ Appliances / white goods ■ Overvoltage / short-circuit V50 ■ Battery chargers protection IFX24401EL PG-SSOP-14 Linear 5V 2.0 % 300mA 250mV 20µA ■ Battery powered ■ Reverse polarity protection V50 IFX25401TE PG-TO252-5 Linear adj., 5.0V 4.0 % 400mA 250mV 100µA instrumentation ■ High input voltage rating: IFX25401TB PG-TO263-5 Linear adj., 5.0V 4.0 % 400mA 250mV 100µA ■ USB HUBs, routers, modems Up to 45V IFX25001TS PG-TO220-3 Linear 5.0, 8.5, 4.0 % 400mA 250mV 100µA ■ Post regulator for DC/DC ■ Overtemperature protection 10.0V converts ■ Very low dropout voltage IFX25001TF PG-TO252-3 Linear 3.3, 5.0V 4.0 % 400mA 700mV 100µA IFX25001TC PG-TO263-3 Linear 5.0, 8.5, 4.0 % 400mA 250mV 100µA ■ Active SCSI terminators ■ Load protection 10.0V ■ Cordless phones ■ Temp. range: IFX25001ME PG-SOT223-4 Linear 2.5, 3.3V 4.0 % 400mA 1000mV 100µA ■ Metering systems –40°C up to +125°C IFX78M05ABTF PG-TO252-3 Linear 5V 3.8 % 500mA 2000mV 3500µA IFX1763XEJ PG-DSO-8, Linear adj., 3.3, 2.5 % 500mA 320mV 0.030mA ■ Motor drives TSON-10 5.0V IFX7805ABTS PG-TO220-3 Linear 5V 3.8 % 1000mA 2000mV 3500µA IFX7805ABTF PG-TO252-3 Linear 5V 3.8 % 1000mA 2000mV 3500µA IFX7805ABTC PG-TO263-3 Linear 5V 3.8 % 1000mA 2000mV 3500µA IFX27001TF PG-TO252-3 Linear adj.,1.5, 3.0 % 1000mA 1300mV 800µA 1.8, 2.6, 3.3, 5.0V IFX1117ME PG-SOT223-4 Linear adj., 3.3V 2.0 % 1000mA 1200mV 5000µA IFX1963TEV PG-TO252-5 Linear adj. 3.0 % 1500mA 340mV 1100µA Recommended Infineon Industrial Voltage Regulators IFX1963TBV PG-TO263-5 Linear adj. 3.0 % 1500mA 340mV 1100µA for Infineon Microcontroller Families

MCU Family MCU Input Voltage [V] MCU Input Current (max) [mA] Voltage Regulator XMC1x00 family 1.8V …5.5V <100 IFX54211/IFX2931/IFX4949/IFX20002/IFX20001/IFX544xx/IFX30081 XMC4x00 family 3.3 <500/300 IFX1763/IFX544xx/IFX1117/IFX25001/IFX25401 XC8xx 3.3…5.0 200 IFX24401/IFX544xx XE166 / XC2000 1.5 and 3.3 or 5 100 IFX2931/IFX4949/IFX54211/IFX54441/IFX30081 TriCore™ 1.5…3.3 >400 IFX27001/IFX8117/IFX25001/IFX1117

1717 Low Dropout Linear Regulators Portfolio

ST’s low dropout (LDO) regulators offer an optimal combination of low dropout voltage, low quiescent current, fast transient response, low noise and good ripple rejection. In particular, the ultra-low dropout (ULDO) regulators are ideal for battery-powered consumer applications, Micros and FPGA power supply as well as portable healthcare devices as a result of: ■ ultra-low quiescent current (down to 1 µA) which extends battery run time ■ tiny package options, including the 0.69 x 0.69 mm CSPs to achieve the smallest footprint

LD39200: STLQ015: LDLN015: LD39130S: 2A Ultra low Dropout 150mA Very low Dropout 150mA Very low Dropout 300mA Very low Dropout ■ 110mV of dropout @ 2A ■ 1µA of quiescent current ■ 6.3µVrms of output Noise ■ 0.7 x 0.7 mm2 Micro ■ Low startup voltage:1.25V ■ 1.6 x 1.6 mm2 ■ 92dB of PSRR CSP 4 Bumps ■ Reverse current protection SOT666 package ■ 2 x 2 mm2 DFN6 package ■ 1µA of quiescent current ■ High PSRR and low noise with automatic green mode

Part Number Maximum Dropout Voltage Quiescent Current Input Voltage Package Features Current [mA] @ max load [mV] @ no load (µA) Range [V] STLQ50 50 400 3.5 2.3-12 SC70 Ultra low Iq ST715 85 500 3.8 2.5-24 SOT23-5, DFN8-3x3 Ultra low Iq, High Vin LDCL015 150 50 120 1.8-5.5 SOT23-5 Capless LD3985 150 60 85 2.5-6 SOT23-5, CSP5 Low noise LD39015 150 80 18 1.5-5.5 SOT23-5, CSP4-1x1 High PSRR Miniature LD39115 150 80 20 1.5-5.5 CSP4-0.8X0.8 High PSRR Miniature LD59015 150 150 31 2.3-5.5 SC70 High PSRR, low Noise LDLN015 150 86 17 2.1-5.5 DFN6-2x2 Ultra low Noise STLQ015 150 115 1 1.5-5.5 SOT666 Ultra low Iq LD39020 200 300 20 1.5-5.5 DFN4-1x1 High PSRR Miniature LDK120 200 150 30 1.9-5.5 SOT23-5, SC70, DFN61.2x1.3 Cost effective, Miniature LDK130 300 200 30 1.9-5.5 LDK220 200 100 40 2.5-13.2 SOT23-5L, SOT323-5L, DFN6-1.2x1.3 Cost effective, Miniature LD39130S 300 1-55 300 1.4-5.5 CSP4-0.7x0.7, DFN6-1.2x1.3 Green Mode, Miniature LD39030 300 200 20 1.5-5.5 CSP4-0.8X0.8, DFN4 1x1 Miniature LDFM 500 125 150 2.5-16 DPAK-PPAK, DFN6-2x2 High Vin LD39050 500 200 20 1.5-5.5 DFN6-3x3 Low Iq ST1L08 800 70 100 1-5.5 DFN8-2x3 Ultra LDO, High PSRR LD39100 1A 200 20 1.5-5.5 DFN6-3x3 Low Iq LDF 1A 200 150 2.5-16 DPAK-PPAK High Vin LDL112 1.2A 350 60 1.6-5.5 DFN6-2x2, DFN6-3x3 SO-8 Low Iq Reverse current prot ST1L05 1.3A 300 350 3-5.5 DFN6-3x3, DFN8-4x4 Very LDO LD39150 1.5A 200 800 2.5-6 DPAK-PPAK, DFN6-3x3 Very LDO LD49150 1.5A 120 4000 1.4-5.5 PPAK Very LDO LD39200 2A 110 100 1.25-6 DFN6-3x3, DFN8-4x4 Ultra LDO, High PSRR; Reverse current prot. LD39300 3A 200 1000 2.5-6 DPAK-PPAK, DFN6-3x3 Very LDO LD49300 3A 220 4000 1.4-5.5 PPAK Very LDO

18 LDO (Low drop out) Linear Regulator Portfolio MCP1710 200 mA Low Dropout (LDO) Voltage Regulator

The MCP1710 is a 200 mA for VOUT < 3.5V, 100 mA for VOUT > 3.5V, low dropout (LDO) linear regulator that provides high-current and low-output voltages, while maintaining an ultra-low 20 nA of quiescent current during device operation.

Features Parameter Name Value ■ Ultra-low 20 nA (typical) quiescent current Max Input Voltage 5.5 ■ Ultra-low shutdown supply current: 0.1 nA (typical) Output Voltage (v) 3.3 ■ 200 mA output current capability for VOUT < 3.5V Typical Active Current (µA) 0.02 ■ 100 mA output current capability for VOUT > 3.5V ■ Input operating voltage range: 2.5V to 5.5V Typical Dropout Voltage @ Max. lout (mV) 400 ■ Standard output voltages: 1.2V, 1.8V, 2.5V, 3.3V, 4.2V Typical Output Voltage Accuracy (%) 2 ■ Low-dropout voltage: 450mV maximum at 200mA Output Current (mA) 200 ■ Stable with 1.0 µF ceramic output capacitor ■ Overcurrent protection ■ Space saving, 8-lead plastic 2 x 2 VDFN-8

Low-Drop Regulators

High Voltage 50mA max 250mA max 500mA max Application

C C C Speci c LDOs VV22..3311 22007711PPCCMM VV22..3311 4455//44110011CCTT 00007711PPCCMM 55227711PPCCMM AAmm 005522 ,,qqII wwooLL ,,qqII 005522 AAmm 22//00770011CCTT AA11007711PPCCMM 88//33//22662211CCTT PCI LDOs C VV6611 33007711PPCCMM VV6611 C C C 77//66662211CCTT AAmm 005522 ,,qqII wwooLL ,,qqII 005522 AAmm 4455//44110022CCTT MCP1710 SS//55228811PPCCMM

C 33222211CCTT Negative LDO VV6611 AA33007711PPCCMM VV6611 800mA max C 300mA max AAmm 005522 ,,qqII wwooLL ,,qqII 005522 AAmm 66110011CCTT ))AAmm0088(( 9955CCTT 55//44662211CCTT C 88//77001111CCTT VV6611 SS//44557711PPCCMM VV6611 LDO Controller AAmm 005511 ,,RRRRSSPP 005511 AAmm 100mA max 77111122CCTT 44//33771111CCTT 7755CCTT C SS//55557711PPCCMM VV6611 5555//55110011CCTT 1A max AAmm 000033 ,,RRRRSSPP 000033 AAmm 99662211CCTT C LDO Combo ICs 5555//55110022CCTT C C 66227711PPCCMM C 22008811PPCCMM 44008811PPCCMM 77//66//55//00003311CCTT AAmm 005511 VV8822 005511 AAmm 33//11770011CCTT C C SS//44228811PPCCMM SS//66228811PPCCMM 44//33003311CCTT C 44222211CCTT 11//00997711PPCCMM OODDLL ++ rreehhccttiiwwSS AAmm 0077 ,,oottuuAA VV0033 ,,oottuuAA 0077 AAmm 150mA max 1.5A max 99//88881111CCTT 33113311CCTT ))AAmm002211(( 77//66//55881111CCTT C 77227711PPCCMM OODDLL ++ rreehhccttiiwwSS C 66//55881122CCTT C SS//77228811PPCCMM Dual LDOs C 77110011CCTT 22//11003311CCTT C 11008811PPCCMM C = Ceramic Capacitor Stable

19 Switching Regulators ICs

Rutronik‘s unique switching regulator portfolio offers input- voltage capability up to 55 V, deliver output currents up to 4 A, with high switching frequency. This broad portfolio of ICs is composed of highly-specialized products to meet every market requirement: HV technology, together with high reliability and robustness for industrial applications, compactness, high efficiency at any load and a high level of performance for consumer and computer products. These devices embed a full set of protection functions (overcurrent, overvoltage, over-temperature) to increase the MTBF and reduce the number of external components. There are multiple package options, all offering compactness and high thermal performances to fit different applications.

Diodes Infineon - IR Intersil Melexis Microchip NJRC Renesas Rohm ST Toshiba ZMDI

Battery Charger ICs

DC - DC Converter ICs

Step Down Switching Regulators

Step Up Switching Regulators

Switch Mode Power Supply ICs

Power Factor Correction ICs

Wireless Charging Solution IC

20 Switching Regulators ICs

LED Drivers Topologies & Applications

Topologies Diodes FSP Infineon Intersil Microchip Micrel NJRC Recom Rohm ST ZMDi

Boost x x x x

Buck x x x x x

Buck-Boost x x x x x x x

Charge Pump x x

Digital Control x x

Flyback x x

Hysteric x

Isolated x x

Linear x x x x x

Modules x x

Offline LED Drivers x x x x x x x x

PFC x x

SEPIC x

Dimmable x x x x

Others x x x x x x x

Applications

Architectural x x x x x x x x x x

Automotive Exterior x x x x x

Automotive Interior x x x x x x x

Backlighting x x x x x x x x

High Bay Storage x x x x x x x x x x x

Lighting Power Supply x x x x x

Portable x x x x x x

Refrigiation x x x x x x x x x

Retrofit LV x x x x x x x x x

Retrofit Offline x x x x x x x x x

Signage x x x x x x x x x x x

Smart Lighting x x x x

Street Lamps x x x x x x x x x x x

21 L6984 & L6986 Energy saving synchronous DC-DC Converters for Industrial

Up to 2 A and up to 38 V input voltage range synchronous step down with extremely low quiescent current ST’s L6984 and L6986, are perfect solutions for industrial applications. These devices are able to provide up to 2 A of continuous output current and with a wide input voltage range from 4 V up to 38 V, accordingly to the part number chosen. High flexibility is given by several adjustable parameters, like output voltage, switching frequency and synchronization capability. Moreover the extreme low operating quiescent current makes these devices suitable for energy saving and low power consumption stand-by applications.

Key Features ■ High switching frequency ■ Very low operating quiescent (up to 2 MHz) current (down to 30 µA) Digital I/O ■ Wide input voltage range ■ Synchronous rectification (up to 38 V) ■ Full embedded protection Power supply line 12 V - 24 V Sensors L6984 Vin Key Benefits Key Applications L6986 Analog output ■ High efficiency at full ■ Industrial application modules 1.. and light load ■ Factory automation ■ High robustn. & reliability ■ Building automation Analog output ■ High design flexibility ■ PLCs modules # ■ Low BOM cost ■ 12 V bus applications ■ Power saving

Part Number L6984 L6984A L6986

Package DFN4x4 10L DFN3x3 10L HTSSOP 16

Input voltage range (V) 4.5 to 36 4.5 to 36 4 to 38

Output current max (A) 0.35 0.35 2 Operating quiescent cur- 100 100 30 rent max (µA) Typ. high side RDSON (Ω) 1.3 1.3 0.18

Typ. low side RDSON (Ω) 1.0 1.0 0.15 3.3 fixed 3.3 fixed Output voltage range (V) 0.9 to 95% VIN 0.9 to 95% VIN 0.85 to VIN adjustable adjustable Switching frequency (kHz) 200 to 600 200 to 600 250 to 2000 External synchronization N.A. N.A. Up to 2000 frequency (kHz) Low noise/low consumption Yes Yes Yes selection mode Enable pin, adjustable Additional Features Enable pin, PGood Enable pin, PGood soft start and reset Operating junction -40, 150 -40, 150 -40, 150 temperature (Tj °C)

22 DC/DC Switching Converters

Infineon offers several switching converters serving applications with extended requirements like supply for 32-bit micrcontrollers. In the portfolio the customer can find step-up (Boost) and step-down (Buck) converters as well as converters cascaded internally with linear regulators and trackers.

CoolSET™ F3 Quasi QR CoolSET™ The lowest in Standby Consumption The High Efficiency Integrated Power IC The CoolSET™ F3 series continues to deliver design agility The quasi QR CoolSET™ series continues to deliver design agility and miniaturization. This new series combines a new feature- and miniaturization. Upon the successful CoolSET™ F3, this new packed controller with the power of CoolMOS™ to give you series offer the possibility of higher efficiency and better EMI the output power you desire. performance. The digital frequency reduction feature scores a very stable operation with decreasing load change, and the fold- ■ Integrated power IC back correction keeps the maximum power limits within tolerance ■ 650V/800V avalanche rugged CoolMOS™ desired by SMPS designers. The active burst mode operation ■ 650V/800V startup cell during low power consumption, remains market leader in provi- ■ 65kHz/67Hz or 67kHz fixed switching frequency ding best-in-class power consumption during standby. ■ Frequency jitter for low EMI (derived series) ■ Adjustable blanking window ■ Integrated power IC ■ Active burst mode to achieve lowest standby power dissipation ■ 650V /800V avalanche rugged CoolMOS™ <100mW ■ 650V /800V startup cell ■ Enhanced integrated protection functions (auto-restart/latch off) ■ Digital frequency reduction with decreasing load ■ Accurate peak power limitation ■ Cycle-by-cycle current limitation with fold-back correction ■ Modulated gate drive ■ Built-in digital soft-start ■ Packages: DIP-7, DIP-8, DSO-16/12 ■ Active burst mode for lowest standby power <50mW ■ Latch-off mode for short-winding and output voltage ■ Enhanced integrated protection functions ■ Temp. range: -40°C to +150°C ■ Modulated gate drive ■ Packages: DIP-7, DIP-8, DSO-12 ■ New Series: ICE2QR0665G, ICE2QR1765G, ICE2QR4765G

23 Power Modules Family Needs

MI C 28 3 04 ( 7 0V ) 7 0 V /

50V 12 x 12 x 3 mm3

U p to MI C 28 3 03 ( 50V )

MI C 4 5205 MI C 4 5208 MII C 4 5212

12 x 12 x 3 mm3

U p 26to V 8 x 8 x 3 10 x 10 x 4 12 x 12 x 4 mm3 mm3 mm3

MI C 3 3 03 0 MI C 3 3 050 MI C 3 3 153 Superior Thermal Performance

2. 5 x 2 x 1. 1 3 x 3 x 0. 9 3 x 3 x 1. 1 mm3 mm3 mm3 U p 5.to 5V MIC45212, VIN = 12V, VOUT = 1.2V, f = 600kHz, IOUT = 10A, TA = 25°C 4 00mA 6 00mA 1A 1. 5A U p to 2A U p to 3 A U p to 6 A U p to 10A U p to 14 A

N ew P rodu c ts

High Density Power Modules from MICREL

Micrel’s highly integrated power module solutions are designed to simplify the system power design process while offering exceptional performance. These modules offer a complete switching power supply solution in an ultra-compact, thermally enhanced, rugged QFN package. These modules integrate a PWM controller, power MOSFETs, inductor, and associated discrete passive components to save board space and reduce component count. All of this results in higher system reliability. The modules achieve up to 93% peak efficiency and are optimized to provide a fast load transient response utilizing Micrel’s Hyper Speed Control™, thereby reducing the amount of output capacitance needed.

Ease of Use High Performance Small Form Factor Robust ■ Turnkey solution for fast ■ Up to 93% peak efficiency ■ Small QFN package ■ Few external components time-to-market ■ Low radiated emission (EMI) reduces solution size improve reliability ■ Integrated controller, meets CISPR22, CLASS B ■ Up to 60% smaller than ■ Rugged package design for inductor, and MOSFETs ■ Hyper Speed Control™ enables discrete solutions enhanced thermal performance, ■ Easy layout and assembly fast load transient response vibration, and humidity resistance ■ HyperLight Load® improves light ■ Specified from –40°C to +125°C load efficiency

Part Number Iout VIN Min VIN Max Vout Freqency Package MIC28304-1 3 4.5 70 Adj 200-600K 12x12 MIC28304-2 3 4.5 70 Adj 200-600K 12x12 MIC45205-1 6 4.5 26 Adj 200-600K 8x8 MIC45205-2 6 4.5 26 Adj 200-600K 8x8 MIC45208-1 10 4.5 26 Adj 200-600K 10x10 MIC45208-2 10 4.5 26 Adj 200-600K 10x10 MIC45212-1 14 4.5 26 Adj 200-600K 12x12 MIC45212-2 14 4.5 26 Adj 200-600K 12x12 MIC33030 0.4 2.7 5.5 1.2, 1.8, 2.5, Adj 8.0M 2.5x2.0 MIC33050 0.6 2.7 5.5 1.0, 1.2, 1.8, 3.3, Adj 4.0M 3x3 MIC33153 1.2 2.7 5.5 1.2, Adj 4.0M 3x3.5 MIC3385 0.6 2.7 5.5 1.5, Adj 8.0M 3x3.5 MIC28303-1 3 4.5 50 Adj 200-600K 12x12 MIC28303-2 3 4.5 50 Adj 200-600K 12x12 MIC45116-1 6 4.75 20 Adj 600K 8x8 MIC45116-2 6 4.75 20 Adj 600K 8x8

24 MCP166x Family High-Voltage Boost Converters

The MCP166x family of devices are compact, high-efficiency, fixed-frequency, non-synchronous step-up DC-DC converters. They provide a space efficient high-voltage step-up power supply solution for applications powered by either two-cell or three-cell Alkaline, Lithium, niCd, MiMH, one-cell Li-Ion or Li-Polymer batteries. This family of products offers two peak input current limit options either 1.3A or 1.8A and two output types optimized for either output voltage regulation or constant current output. Low-voltage technology allows the MCP166x family to start-up without high inrush current or output voltage overshoot. All compensation and protection circuitry is integrated to minimize the number of external components.

Features Applications ■ Up to 92% Efficiency ■ Li-Ion Battery LED Lighting Applications ■ Input Voltage Range: 2.4V to 5.5V Undervoltage Lockout ■ Camera Flash ■ Flashlights and Backlight Current Source Portable Devices (UVLO): ■ Medical Equipment - UVLO @ VIn Rising: 2.3V, typical ■ Single-Cell Li-Ion to 3.0V or 3.3V SEPIC Applications - UVLO @ VIn Falling: 1.85V, typical ■ No Load Current: 250 μA, typical Development Tools: ■ Sleep mode with 200 nA Typical Quiescent Current PWM ■ MCP1663 9V/12V/24V Output Boost Regulator Evaluation Operation with Skip Mode: 500 kHz Board (ADM00664) ■ MCP1664 LED Driver Evaluation Board (ADM00641) MCP1662 ■ Inrush Current Limiting and Internal Soft-Start Evaluation Board (ADM00555) Overtemperature Protection ■ Easily Configurable for SEPIC or Flyback Topologies Overvoltage Protection ■ Available Packages: 5-Lead SOT-23 or 2x3 8-Lead TDFn

MCP1664 LED Driver Evaluation Board (ADM00641)

Part Number MCP1661 MCP1662 MCP1663 MCP1664 Output Type Voltage Regulation Up to 32V* Constant Current Up to 8 white LEDs* Voltage Regulation Up to 32V* Constant Current Up to 8 white LEDs*

Peak Switch 1300 mA 1300 mA 1800 mA 1800 mA Current ■ IOUT > 200 mA @ 5.0VIn, 12VOUT ■ ILED up to 200 mA @ 5.0VIn, 4 white LEDs ■ IOUT > 375 mA @ 5.0VIn, 12VOUT ■ ILED up to 375 mA @ 5.0VIn, 4 white LEDs ■ IOUT > 125 mA @ 3.3VIn, 12VOUT ■ ILED up to 125 mA @ 3.3VIn, 4 white LEDs ■ IOUT > 200 mA @ 3.3VIn, 12VOUT ■ ILED up to 200 mA @ 3.3VIn, 4 white LEDs ■ IOUT > 100 mA @ 4.2VIn, 24VOUT ■ ILED up to 100 mA @ 4.2VIn, 8 white LEDs ■ IOUT > 150 mA @ 4.2VIn, 24VOUT ■ ILED up to 150 mA @ 4.2VIn, 8 white LEDs Key Attributes High Output Voltage, up to 32V Optimized for LED Driving Open Load Protection High Output Voltage, up to 32V Optimized for LED Driving, Open Load Protection

*See Datasheet note

25 ISL9120

Compact High Efficiency Low Power Buck-boost Regulator ISL9120

The ISL9120 is a highly integrated buck-boost switching regulator that accepts input voltages either above or below the regulated output voltage. This regulator automatically transitions between buck and boost modes without significant output disturbance. The ISL9120 also has automatic bypass functionality for when the input voltage is generally within 1% to 2% of the output voltage. Under this condition, there will be a direct bypass connection between the VIN and VOUT pins. In addition to the automatic bypass functionality, the ISL9120 also has forced bypass functionality with the use of the BYP pin.

V I N = 1. 8 V TO 5. 5V I S L9 120I I N Z Typical fixed output Features V I N LX 1 application C 1 L1 10 F ■ Accepts input voltages above or below regulated output voltage 1 H LX 2 E N AB LE V OU T ■ Automatic bypass mode functionality E N V OU T = 3 . 3 V DI S ABLE ■ Automatic and seamless transitions between buck and boost modes C 2 F ORC E D B YP ASS B YP F B 22 F or 4 7 F B U C K -B OOS T D

■ Input voltage range: 1.8V to 5.5V D N N ■ Selectable forced bypass power saving mode G PG ■ Adaptive multi-level current limit scheme to optimize efficiency at low and high currents ■ Output current: up to 800mA (VIN = 2.5V, VOUT = 3.3V) Efficiency: VOUTOUT = 3.3V, TA = +25°C ■ High efficiency: up to 98% 100 V I N = 3 . 6 V ■ 41µA quiescent current maximizes light load efficiency 9 5

■ Fully protected for over-temperature and undervoltage ) 9 0 %) %

■ Small 1.41mm x 1.41mm WLCSP V = 4 V V I N = 3 . 4 V 8 5 I N I N = 3 VV

V I N = 2. 5V Applications E F8 F 0 I C I E N C Y (

■ Tablets 7 5

■ Portable consumer and wearable devices 7 0 1 10 100 1000 ■ Any product powered by single cell battery OU TP U T C U RREN T ( mA)

FIGU RE 2. EFFICIENCY: VOUT = 3.3V, TA = +25°C

26 Wireless charging Solutions for Wearable Applications

STWBC STWLC03 Digital Controller for Wireless Battery Charger Transmitters Dual-mode Qi/PMA Wireless Power Receiver ■ Available in compact VFQFPN32 package, 20 leads ■ Available in compact flip chip 77 bumps

■ Evaluation board: STEVAL-ISB027V1 Qi A11 wireless charger => In development, samples available transmitter

Features STWBC platform: User Benefits ■ Multiple Qi certified and PMA standard compatible ■ Total Reference Design (IC, Firmware, Layout, Tools) ■ Support for up to 5 W applications: mobile; werable, sports gear, ■ For Mobile: Qi 1.1.2 Certified and PMA ready medical & remote controllers ■ For Wearable Device: ■ Native support to half-bridge and full bridge topologies - Support for custom protocols and HW ■ 5 V supply voltage - Customizable for several power rates ■ 2 firmware options ■ Turn-key & SW APIs for application customization - Turnkey solution for quick design - APIs available for application customization WPC wireless charger topology concept ■ Peripherals available via APIs Efficient Wireless Power Transfer is obtained by adapting the - ADC with 10 bit precision and 1 MΩ input impedance transmitted power to what is really needed, according to the - UART actual load conditions of the receiver. - I2C master fast/slow speed rate This is obtained by a digital feedback from the RX to the TX, - GPIOs achieving a closed-loop power regulation. ■ Memory - Flash and E2PROM with read-while-write (RWW) and error correction code (ECC) Mobil e Dev ic e Load 5W RX - Program memory: 32 KBytes Flash; Sensing & Control Output data retention 15 years at 85 °C after 10 kcycles at 25 °C Power - Data memory: 1 KByte true data E2PROM; Power Pick-up Communications Unit & Control Unit data retention: 15 years at 85 °C after 100 kcycles at 85 °C Secondary Coil - RAM: 6 KBytes OMM. P ow er Rec eiv er C

ER Magnetic Coupling ■ Reference design features L Primary Coil P ow er Tran smitter OW

- 2 layers PCBs P Power Communications - Graphical user interface for application monitoring Conversion Unit & Control Unit

Input - Active object detection Power - Evaluation boards System Unit ■ Operating temperature: TX B ase S tation -40 °C up to 105 °C ■ Package: VFQFPN32

STEVAL-ISB027V1 Qi A11

27 Protected MOSFETs Protected MOSFETs are known as low-side and high-side switches. High-side switches, with additional integrated features that can switch high currents into grounded loads safely and in compliance with the harsh automotive environment. High-side switches only require a simple TTL logic input, and incorporate a diagnostic output status to the microcontroller. They can easily drive all types of inductive, resistive and capacitive loads. The Rutronik portfolio fits a broad range of auto motive, industrial and consumer applications.

Technical Infineon Intern. STMicroelectronics Diodes Renesas Rohm Toshiba NJRC Microchip Micrel Intersil Facts Rectifier TEMPFET™ HITFET™ SPIDER+ FLEX Multi PROFET™/ OMNIFET III Smart High Side Smart Smart High Side Power High IntelliFET® IPDs Thermal FET High Side Switch HSS/LSS MosFET HSS/LSS High-Speed Power HSS/LSS MosFET FETs Channel PROFET™+ Switch with SPI High Side Switch Side Switch MosFET MOSFET and asymmetri- Switch cal Output 24V Product BTS28xx, BTS31xx, TLE75xxx TLE62xxxx, BTT60xx, BTT61xx, BTT62xx, AUIPS10xx, VNL53xx, VNQ600xx, VN5Txxxx, L6370Q, VN751, VN7xxxAx, ZXMS6006xx, NHS01xx, RJF060xx, BD226xxx, TPD1052F, TPD1053F, NJW48xxx, MCP140x, MIC412x, MIC422x, HIP4020x, Identifica- BTS24xx BTS32xx, TLE81xxx BTS42k5D-xx, BTS50xxx, AUIPS20xx, VNLD53xx, VNQ604xx, VND5Txxxx TDE170x, IPS160H, VND7xxxAx, ZXMS6005xx, NHD01xx, RJE060xxx, BD2244xx, TPD1044F, TPD1054F, NJM354xxx MCP146xx, MIC441x, MIC442x, ISL891xx, tion BTS3xxxSDx BTS51xx, BTS552xx, AUIPS60xx, VNL51xx, L99CL01XP L637x, VNI2140J, VNQ7xxxAx, ZXMS6004xx, NHD05xx, RJE061xxx, BD200x/xFVJ-M, TPD1030F, TPD1036F, MCP147xx, MIC445x, MIC446x, ISL551xx, BTS555xx, BTS621xx, AUIPS70xx, VNLD51xx, VNI4140x, VNQ860, VN7004Cx, ZXMS6003xx, NHQ05xx, HAF10xxx, BD2068/69FJ-M, TPD1032F, TPD1046F, MCP14Exx, MIC447x, MIC4480, EL71xx, BTS61xx, BTS64xx, AUIR33xx, VNL50xx, VN808-xx, VND7xxxAJ12 ZXMS6002xx, NHD09xx, HAF20xxx BD20xx, BD22xx, TPD7101F, TPD7104F, TC1410x, TC1411x, MIC44Fxx, EL72xx, BTS4xxx, BTS84xx, AUIPS71xx VNLD50xx, VN808CM-xx, BSP75x NHQ05xx, BD801xx, BD82xxx, TPD7210F, TPD7211F TC1412x, TC1413x, MAQ412x, MIC501x, EL74xx, BTS52xx, BSP762x, VNL5Dxxx VNI8200XP, NHQ09xx, D20xx, BD6516, TC142x, TC42x, MIC502x, MIC5060 ICL766x BSP75xx, BSP4xx, BTS7xxx, ISO8200B µPD16600xx BD80xx, BD82xx, TC44xx, TC462x BTF500xx, ITS40xxx, BD65xx, BD22xx ITS41xxx, ITS42xxx, ITS43xx AECQ Qualified

Industrial x Truck 1CH x 2CH x 4CH 8CH CH up to 18 6 Low Side x High Side x Temperature x Protection Current x Protection Overvoltage x Protection ESD JEITA standard RDSON 6.5 - 18 10 - 800 1000 depending 1.5 - 1000 7 - 300 30 - 300 2x10 - 4x40, 6 - 100 60 - 270 4 - 140 125 - 675 6 - 59000 10 - 260 70 - 220 120 - 800 250 - 1100 1500 - 16000 600 - 30000 2000 - (mΩ) on Chan- 500 - 1000 8000 nels Special switching ESD, Over- All devices with Limp Auto restart Thermal shutdown with Logic Level MO5 MO6 MO5 BCD MO-7 Techno- smallest reverse batte- over tem- USB application, Detecting a load short to be suited for wide operation wide operation fast rise Features up to current Home and Cranking restart/latch, over-current and input, active Technology Technology / Techno- Technology / logy package: ry protection perature soft start power supply. sensor output voltage voltage and fall 100kHz and over- function down to 3V over-temperature protection, clamp, switching BCD Technology logy VIPower Technology SOT23F by self turn shut-down, by Low voltage operation. block time temperature battery. Enhaced dia- protection against loss of time optimized package on of N-Ch sensing junc- Output current monitoring. protection gnosis function, small battery and GND, reverse bat- for low EMI, Dia- MOSFET tion tempera- Reverse supply protection. with latch / 150 mil packages tery protection, short-circuit gnostic on the ture of N-Ch Current-sense output. restart only. 2 direct inputs protection, proportional load input current, MOSFET Diagnostic output. with mapping current sense, fast switching reverse battery function. Optional protection, short features for LED and circuit protection bulb drive Preferred R, L, C, R, L, C, R, L, LED, unipolar L, R L, R, C L, R, C L, R, C, L, R, C, bulb, L, R, C, L,R,C, bulb, LED L, R, C, bulb, L, motor, R, L, C, LED, R, L, C, LED, R,L,C R, L, C, bulb, motor L, R, C L, R L, R L, R, motor Load bulb, motor bulb, motor stepper motors bulb, LED LED bulb, LED LED, motor relay, bulb bulb bulb

28 Protected MOSFETs

29 The new Generation of HITFETTM HITFETTM+

Infineon launched the first HITFETTM+ product BTF3050TE offering a dedicated slew-rate control pin, handshaking feedback, faster switching speed and state of the art short circuit protection. The part is the first to come from a whole new family which is now launched. The 3pin DPAK family is targeted for 1:1 replacement and comes in 4 products: BTS3035TF, BTS3050TF, BTS3080TF and BTS3125TF in later 2015 and the footprint saving DSO8 exposed pad parts follow then in early 2016. Infineon offers a HITFETTM+ product family which is scalable in RDSon, package and more.

Features ■ Very low power DMOS leakage current in OFF state ■ 3.3V and 5V compatible logic inputs ■ Electrostatic discharge protection (ESD) ■ Adjustable switching speed ■ Handshaking digital feedback with autorestart in power stage ■ Green product (RoHS compliant) ■ AEC qualified ■ Packages: 3-pin and 5-pin DPAK

Benefits Applications ■ Increased robustness ■ Suitable for resistive, ■ Selectable slew-rate inductive and capa- ■ 3.3V microcontroller citive loads compatible ■ Fuse replacement ■ Low DMOS leakage current ■ Relay replacement ■ Small motors ■ Solenoids

Product Name RDSon (25 typ) RDSon (150 max) Current Limit Ilim(min) VDS (max) Temperature Sensor Package

BTF3050TE 40 100 30 (8) 40V 150°C PG-TO252-5

BTS3035TF 35 70 20 40V 150°C PG-TO252-3

BTS3050TF 50 100 15 40V 150°C PG-TO252-3

BTS3080TF 80 160 10 40V 150°C PG-TO252-3

BTS3125TF 125 250 7 40V 150°C PG-TO252-3

30 Channels BTxAB CD-x Eyz Design variant

Package: K = SO14 J = SO 8 M = SSOP 24 Indication of use of an exposed pad package

Rollout of the new PROFET™+ 24V BTT-Series The next level of PROFET™+ modularity has been achieved !

Infineon now launches the second wave of its next generation of Smart High-Side Switches PROFET™+ 24V which includes three Single Channel devices with 20, 30 and 50mΩ and one Dual Channel device with 30mΩ. Same as the lead product of PROFET™+ 24V, BTT6050-2EKA, all three new products provide excellent diagnostics and protection features. They are specifically designed to drive light bulbs and LEDs in the harsh automotive environment, such as trucks and farming machines or any other kind of 24V supply voltage applications.

Applications Features ■ 24V grounded high-side loads ■ N-channel MOSFET with charge pump ■ µC compatible with diagnostic feedback ■ Voltage dependent current limitation ■ Qualified for automotive applications such as lighting, ■ Over temperature protection with latch body control modules, heating, energy/power distribution ■ Load dump protection: 65V ■ Various industrial applications such as industrial automation, ■ Very high robustness against repetitive short-circuit (500 k cycles) lifting systems, household applications ■ High accurate proportional load current sense for diagnostic ■ Capacitive loads such as bulbs, lamps with high inrush feedback of smallest loads (LEDs) currents ■ PWM capability up to 500Hz ■ Resistive loads such as LEDs or heating streamers ■ Very low stand-by current (<0.5 µA) ■ Inductive loads such as valves, solenoids or relays ■ Pin compatible in PG-DSO14 and PG-DSO8 ■ “Electronic” loads such as control unit power supplies exposed pad packages ■ Replacement of electromechanical relays, fuses and ■ Improved heat dissipation of DSO package discrete circuits ■ RoHS & ELV compliant

Diagnostic Functions ■ Proportional load current sense ■ Open load detection in ON and OFF ■ Over-temperature sense ■ Stable diagnostic signal during short circuit ■ Enhanced kILIS accuracy with calibration ■ Short circuit to battery and ground ■ Current sense matching between channels

Product Type Package Chan- RON @ Oper. Oper. kILIS Minimum nel Tj=25°C Voltage Voltage current limi- min. V) max. (V) tation IL (SC) BTT6010-1EKA DSO-14 1 10mΩ 5 36 3900 90A BTT6020-1EKA DSO-14 1 20mΩ 5 36 3000 70A BTT6030-1EKA DSO-14 1 30mΩ 5 36 2150 60A BTT6050-1EKA DSO-14 1 50mΩ 5 36 1500 38A BTT6200-1EJA DSO-8 1 200mΩ 5 36 300 9A BTT6030-2EKA DSO-14 2 30mΩ/Ch 5 36 2150 56A/Ch BTT6050-2EKA DSO-14 2 50mΩ/Ch 5 36 1500 38A/Ch BTT6100-2EKA DSO-14 2 100mΩ/Ch 5 36 600 20A/Ch BTT6200-4EMA SSOP-24 4 200mΩ/Ch 5 36 300 9A/Ch

31 IR Protected Mosfets Automotive Intelligent High Side Power Switch (IPS)

Infineon offers with IR protected Mosfets qualified protected Features Benefits high-side switches to drive any kind of load connected to the ■ Protected high side switch ■ Over-current protection ground. ■ AEC qualified ■ Over-temperature protection ■ Rdson from restart / latch IR‘s high-side Intelligent Power Switch (IPS) family integrates 3mOhm up to 120mOhm ■ Reverse battery protection into a single package a low RDS(on) output HEXFET® power ■ Packages: ■ Active clamp MOSFET with protection and control circuits, making these - D2pak – 5 leads , 7leads, ■ Digital diagnostic output ICs the most rugged, efficient and compact devices available for - DPAK/SO8 ■ Open load detection automotive loads in harsh environments. ■ Voltage and current ■ Proportional load current controlled sensing The embedded charge pump makes the interface to the micro- ■ High speed or high energy ■ ESD protected controller very simple with full logic-level compatibility. Provi- ■ 12V and 24V applications ding the ideal replacement for electro-mechanical relays, these devices suit applications including transmission and electronic HSS with current sense stability controls, lighting, ABS, fuel injection systems, pump (example: AUIPS a) motors and radiator fans. Vcc

IN IPS Applications Battery Ifb Out ■ Suitable for resistive, ■ Relay replacement Current feeback 10k inductive and capa citive ■ Small motors Input Load loads ■ Solenoids Rifb On Logic Power ■ Fuse replacement Off Ground Ground

32 DISCOVER INNOVATION IN MOTION

FIVE CORE SEGMENTS RUTRONIK AUTOMOTIVE offers you a new range of bundled hardware, software and services. RUTRONIK AUTOMOTIVE brings together entire solutions to build applications for:

BODY COMFORT & SAFETY DRIVE TRAIN eMOBILITY ELECTRONICS CONVENIENCE

■ Airbag ■ Light Sensors ■ Engine Control Unit ■ Seat Heating ■ Battery Cell ■ Crash Avoidance ■ Rain Sensors ■ Fuel Pump ■ Air Conditioning Monitoring Circuit ■ Windshield Wipers ■ Electric Power ■ Audio Entertainment ■ Battery ■ Anti-Look Brake ■ Water Pump Steering ■ GPS / Navigationl Management ■ Rain Sensors ■ Communication Bus ■ Water Pump ■ Parking Assistant ■ Regenerative ■ Tire Pressure (LIN, CAN) ■ Engine Cooling Fan ■ Automotive Internet Braking ■ Seat Weight Sensor ■ Dashboard Systems ■ Turbo Charger ■ Electric Drive ■ Traction Control (ESP) ■ Car Alarm

OUR RANGE OF CORE PRODUCTS ELECTROMECHANICAL SEMICONDUCTORS DISPLAYS & BOARDS COMPONENTS STORAGE WIRELESS PASSIVE COMPONENTS TECHNOLOGIES COMPONENTS

OUR PARTNERS AND CORE LINES Worldwide leaders in AUTOMOTIVE technologies and innovation

www.rutronik.com/AUTOMOTIVE 33 Intelligent Power Switches

ISO8200B: Octal intelligent Power Switch VNI8200XP/(-32) Octal intelligent Power Switch with embedded Galvanic Isolation with selectable Interface-Parallel / SPI The ISO8200B is an isolated 8 channel monolithic power switch The VNI8200XP is an 8 channel monolithic power switch capable of capable to drive any kind of load. It has been primarily designed drive in any kind of loads (R, L, C). It has been primarily designed to to realize 0.5A rated digital outputs in industrial automation realize 0.5A/(1A) rated digital outputs in industrial automation appli- appli cations. Galvanic isolation between the „logic“ & „power“ cations. Its power stage features very low Rdson fully protected side guarantees transient overvoltage immunity of 3.5kVPeak in MOSFETs (110mΩ). They contribute to achieving very high efficiency accordance with the IEC 60747-5-2 standard. together with the embedded DC/DC converter used to provide supply voltage for internal logic as well as for LED status driver which is also The two sections communicate with each other in both directions fully embedded on the chip. Communication interface of the driver is with certain level of redundancy in order to achieve reliable opera- selectable between standard parallel or seriel using SPI with multiple tion with feedback from the power side. Its power stage features node support (daisy-chain). Device provides exhaustive status infor- very low Rdson fully protected MOSFETs (110mΩ). Together with mation like channel overload, thermal warning, feedback about chip its low supply consumption it makes the driver very efficient. main supply voltage and regulated DC/DC output voltage, parity error The chip has a parallel interface which supports the two possible etc. Active channel current limitation combined with thermal shut- options: direct mode synchronous mode. down, independent for each channel, and automatic restart, protect Thanks to the embedded isolation the amount of external com- the device against overload. Additional „case“ temperature sensor ponents is minimized and the application becomes very compact. increases reliability and protects board against thermal stress.

Key Features Key Features ■ Transient overvoltage ■ Channel independent over- ■ Maximum supply voltage: 45V ■ Common fault open drain max. 3.5kV peak temp. detection and protection ■ 8 channel with inductive output ■ 8 Channel with inductive ■ Additional case temperature clamping (VCC - 45V) ■ Integrated 3.3V/5V 100mA clamping (Vcc - 45V) sensor (PCB protection) ■ 0.11Ω typ. @ 25°C/0.2Ω highly efficient sync. DC/DC ■ Maximum supply voltage: 45V ■ Non-simultaneous channel max. @125°C converter ■ 0.1Ω typ. @25°C/0.2Ω max. restart ■ Output current: 0.7A/(1A) ■ Programmable watchdog @125°C ■ Drives all types of loads (R, L, C) per CH ■ 4x2 LED matrix integrated ■ Output current: 0.7A per CH ■ Loss of GND protection ■ Serial/parallel selectable driver (outputs status) ■ Parallel interface with ■ Under voltage protection interface ■ Under-voltage protection output disable pin ■ VCC clamping ■ Short circuit and thermal ■ Low supply current protection with pre-warning ■ Direct control mode, ■ Low supply current ■ Loss of GND protection synchronous control mode detection ■ Common fault open drain ■ Power good diagnostic ■ 8bit/16bit 5Mhz SPI for control ■ Embedded watchdog and output ■ VCC clamp Vcc fault systems and diagnostic, daisy-chain ■ IEC 61131-2 compliant support ■ Short circuit protection and ■ PowerSO-36 package thermal protection ■ Junction over-temperature protection (common for all CH)

34 Next-Generation VIPower M0-7® intelligent High-Side Switches

ST‘s new family of VIPower M0-7 intelligent power switches provide enhanced intelligent features, improve protection and reliability, and are up to 40% smaller than competing alternatives. Pioneered by ST, intelligent high-side switches provide a more reliable and efficient replacement for conventional relays, and can drive also all kind of inductive, capacitive and resistive loads. In the VIPower M0-7 series, 75% of family members are available in a 5 x 4 mm package, which is 40% smaller than the smallest competing devices. This allows car electronics designers to save PCB space and aim for smaller module sizes. Moreover, various internal design changes increase precision, enhance diagnostic feedback and improve reliability. Specifically, performance improvements include very low standby current (0.5μA max @85°C), greater protection against short-circuits, increased current-sense precision with new options (chip temperature, Vcc feedback) and best-in-class electromagnetic emission (EMI) performance. The VIPower M0-7 family operates at very low battery voltage, even down to 4V. Diagnostic Functions Protections ■ Multiplexed analog feedback ■ Undervoltage shutdown - load current with high precision proportional current mirror ■ Overvoltage clamp -VCC supply voltage ■ Two levels of load current limitation -TCHIP device temperature ■ Self limiting of fast thermal transients ■ Overload and short to ground (power limitation) indication ■ Real-time configurable latch-off or auto-restart mode ■ Thermal shutdown indication on overtemperature or power limitation ■ Full ON- and OFF-state diagnostics capability ■ Loss of GND and Vcc ■ Output short to VCC detection ■ Reverse battery with and without external components ■ Multisense enable/disable ■ Electrostatic discharge protection (ESD)

Part Number Package Operating Range Max Supply On-State Resi- Current Limi- Configurable Multisense Reverse Battery Vcc Voltage Vcc stance Rdson tation Ilim Auto-restart or [V] [V] [mW] [A] Latch-off Single-Channel Devices VN7004CH (*) Octapak 4-28 38 4 100 Current sense yes VN7004CLH (*) Octapak 4-28 38 4 100 yes Current sense yes VN7007AH Octapak 4-28 38 7 100 Current sense yes VN7007ALH Octapak 4-28 38 7 100 yes Current sense yes VN7008AJ (*) PowerSSO-16 4-28 38 8.5 96 yes Current sense External components VN7010AJ PowerSSO-16 4-28 38 10 91 yes yes External components VN7016AJ PowerSSO-16 4-28 38 16 77 yes yes External components VN7020AJ PowerSSO-16 4-28 38 20 63 yes yes External components VN7040AS SO-8 4-28 38 40 34 Current sense External components VN7040AJ PowerSSO-16 4-28 38 40 34 yes yes External components VN7050AS SO-8 4-28 38 50 30 Current sense External components VN7050AJ PowerSSO-16 4-28 38 50 30 yes yes External components VN7140AS SO-8 4-28 38 140 12 Current sense External components VN7140AJ PowerSSO-16 4-28 38 140 12 yes yes External components Dual-Channel Devices VND7004AY (*) PowerSSO-36 4-28 38 4 100 yes yes yes VND7012AY (*) PowerSSO-36 4-28 38 12 75 yes yes yes VND7020AJ PowerSSO-16 4-28 38 20 63 yes yes External components VND7030AJ PowerSSO-16 4-28 38 30 56 yes yes External components VND7040AJ PowerSSO-16 4-28 38 40 34 yes yes External components VND7050AJ PowerSSO-16 4-28 38 50 30 yes yes External components VND7050AJ12 PowerSSO-12 4-28 (**) 38 50 30 Current sense External components VND7140AJ PowerSSO-16 4-28 38 140 12 yes yes External components VND7140AJ12 PowerSSO-12 4-28 (**) 38 140 12 Current sense External components Quad-Channel Devices VNQ7040AY (*) PowerSSO-36 4-28 38 40 34 yes yes yes VNQ7050AJ PowerSSO-16 4-28 38 50 27 yes Current sense External components VNQ7140AJ PowerSSO-16 4-28 38 140 12 yes yes External components

(*) in development (**) extended operating range down to 2.85V for deep cold cranking applications, compliant with LV124 revision 2013

35 New Tiny Protected MOSFETs

NJW4822/NJW4832 The NJW48xx series is integrates a Power MOSFET and a Driver Circuit, therefore it can drive a Power Switching easily. It has protection features such as over current protection, over voltage protection, and thermal shutdown. Compared to a discrete device, it makes the system more reliable. The outstanding tiny DFN6-H1 package will support you in many different applications like automotive, industrial, medical and consumer. It helps you to safe space on the PCB and finally cost reduction is also one of the benefits.

Type Chan- Channel Rdson at Uin= 5V/ Drain Source Drain Low Corresponding with Built-in Over Active Package nel Typ Id= 0.2A (mΩ) Voltage (V) Current Consumption Logic Voltage Thermal Shut Current Clamp (mA) Current (µA) Operation (V) Down Protection Circuit NJW4822 1 Low Side 1200 43 200 160 3/5 yes yes yes DFN6-H1 NJW4832 1 High Side 750 45 200 110 3/5 yes yes yes DFN6-H1

NJW4822 NJW4832 Applications ■ Pin Configuration Applications Pin Configuration ■ Solenoid ■ Package: DFN6-H1 ■ Car accessorys‘s ■ Package: DFN6-H1 ■ Lighting Line switch ■ Small motor ■ Sensor (PNP output) ■ Sensor (NPN Output) driving driving ■ Lighting

Schematic Schematic

36 MO272-2 24PHSSOP MO226-12 TO252-7

Intelligent Power Devices RoSa(1) and HOpe(2) Families

Designed for automotive applications, Intelligent Power Devices are high-side drivers combining N-Channel power MOS with integrated charge pump and gate control, protection circuits, and proportional load current sensing.

RoSa Family

■ Offers 14 products from 6mΩ to 70mΩ, single to quad channels, Order Package Channels RDS(on) [mΩ] Sense Ratio in DPack (TO-252-7), HSSOP-12 or HSSOP-24 packages for Code typ. UPD166033 TO-252-7p 1 6 12500 nominal load current up to 11A. Designed to drive lamps with high UPD166034 TO-252-7p 1 8 9400 inrush current, they can be used as general purpose devices UPD166031 TO-252-7p 1 10 7500 to drive various types of resistive capacitive or inductive loads UPD166032 TO-252-7p 1 6250 ■ Unified uC interface combined with Rdson variation at given UPD166023 HSSOP-12 1 12 package gives design scalability UPD166024 HSSOP-24 2 ■ Robustness is achieved by advanced protection features based on UPD166025 HSSOP-12 1 16 5800 power dissipation control and temperature control UPD166026 HSSOP-24 2 UPD166038 HSSOP-12 2 20 ■ diagnostic and proportional current sense allow to develop fail safe 3400 applications UPD166037 HSSOP-12 2 30 UPD166027 HSSOP-12 2 35 3400 ■ N-Channel ■ Control Voltage: 3.3 - 5.0 V UPD166028 HSSOP-24 4 ■ Current Sense ■ Overtemp. Protection: Auto restart UPD166029 HSSOP-12 2 70 1400 ■ Diagnostic ■ Overcurrent Protection: UPD166030 HSSOP-24 4 Latch and current / power limitation

Order Code Control Rdson DC Load Sense Satus HOpe Family Type (mΩ) Current (A)* Ratio

■ Offers low Ohmic products from 1.6mΩ to 3.8mΩ in D2Pack RAJ280002 4H11HPF Current 2 33 70000 Sample (TO-263-7) for nominal DC load current up to 40A RAJ280003 4H11HPF 3 27 44000 Development ■ Designed for high current applications, they can be used as RAJ280004 4H11HPF 4 22 32000 Development general purpose devices to drive various types of resistive capacitive or inductive loads RAJ280002 4H12HPF Voltage 2 33 70000 Sample ■ Using a wide Safe Operating area Power Mosfet technology RAJ280003 4H12HPF 3 27 44000 Development Hope devices achieve an outstanding energy performance RAJ280004 4H12HPF 4 22 32000 Development while driving inductive load *Ta =25°C ■ Hope devices have under voltage shutdown and can operate to ■ Package: TO263-7 voltage down to 4V ■ Diagnostic ■ Overcurrent/overload protection: ■ Overtemp. Protection: - Shutdown and latch Shutdown and latch - Power dissipation control

1) RoSa is abbreviation of robustness and safety 2) HOpe is abbreviation of high operating current 37 Motor Driver ICs

Motor Driver ICs

The trend towards greater efficiency in automotive and industrial applications also concerns electric motors. Applications such as power steering, HVAC compressors and engine cooling fans and robotics will be controlled by electronic motors in the future. In general, there are three different types of Motor Drivers for Stepper, DC brush/brushless and 3Phase. Our portfolio includes Monolithic Driver IC‘s, Half-Bridges, Full-Bridges, Multi-Half-Bridges, Integrated Motor Driver ICs, H-Bridge Drivers + MOSFETs and 3Phase-Bridge Driver + MOSFETs.

Motor Infineon Microchip NJRC ROHM STMicroelectronics Toshiba Melexis Micrel

TLE520xx, MTS291xx, Single Phase DC NJU7367/A BA62xx, STSPIN power Dual Full Bridge Full bridge MLX81150 Half Bridge TLE720xx, MTS62Cxx, Motor driver BA69xx, L6205 L6201 MLX83100 TLE82xxx, BD169xx, L6206 L6202 MIC410x TLE9201/ BD621xx, L6207 L6203 MIC4600 IFX9201, BD623xx, L6225 MIC4604/5 TLE6208xx, BD654xx, L6226 MIC4608 TLE844xx, BD673xx, L6227 Dual Full Bridge TLE820xx, BD694xx L6206Q L6219 BTN89X2, L6207Q BTM77XX, L6226Q

DC-Brush TLE618x, L6227Q TLE7181, TLE7182, L9958 VNH2xx L99H01 Full Bridge TLE420x, L9959 VNH3xx MIC4606 TLE6208, L9960 VNH5xx TLE84106, VNH7xx TLE84110 STSPINbattery Dual Full Bridge STSPIN240 TLE986x

TLE472xx, Bipolar Driver NJM371x, BD62xxx, STSPINdigital µStepper DRIVER µStepper Controller TLE844xx NJM377xx, BD638xx, with motion engine with motion engine NJM13775, BD639xx, L6470 L6480 NJM2673, BD642xx, L6472 L6482 NJM6219, L6460 NJW4382 µStepper SiP µStepper DRIVER Controller+MOSFETS L6474 with motion engine L6258 powerSTEP01 Motor Stepping w/Translator NJM4372, STSPINbattery µStepper DRIVER NJM4375 STSPIN220

H(Full) Bridge NJW267x, Dual Full bridge with controller Driver NJW437x, L6208 L6228 L6208Q L6228Q NJW438x L9942

6ED003xx MTD650xx Bipolar Process NJM262xx BA666xx, STSPIN power 3-phase Bridge TPD41xxA MLX8320x MIC4607 BTN89x2 BA685xx, L6229 L6229Q /AK TLE718x BCD Process NJW430x BD667xx, L6230 L6230Q TLE9180 BD676xx, L6234 L6235Q TLE987x BD679xx, L6235 L99ASC03 Motor BD168xx L9907x

3Phase Brushless STSPINbattery 3-phase Bridge STSPIN230

38 Motor Driver ICs

Motor Infineon Microchip NJRC ROHM STMicroelectronics Toshiba Melexis Micrel Motor Driver ICs TLE520xx, MTS291xx, Single Phase DC NJU7367/A BA62xx, STSPIN power Dual Full Bridge Full bridge MLX81150 Half Bridge TLE720xx, MTS62Cxx, Motor driver BA69xx, L6205 L6201 MLX83100 Power bridges for all kind of motors in automotive and industrial applications TLE82xxx, BD169xx, L6206 L6202 MIC410x from 100mA up to 70A with different feature sets “scaled to your needs” TLE9201/ BD621xx, L6207 L6203 MIC4600 IFX9201, BD623xx, L6225 MIC4604/5 TLE6208xx, BD654xx, L6226 MIC4608 TLE844xx, BD673xx, L6227 Dual Full Bridge ■ High Power DC and BLDC motor bridges Available Certificates TLE820xx, BD694xx L6206Q L6219 ■ Scalable and flexible solutions with different functional ■ TS16949 and ISO 9001 Certificates BTN89X2, L6207Q BTM77XX, L6226Q options for all kind of motor drivers from 2A DC up to 70A ■ ISO 14001 and OHSAS 18001 Certificates

DC-Brush TLE618x, L6227Q TLE7181, peak currents. Usable in all kind of application areas. ■ IRIS Certificates TLE7182, L9958 VNH2xx L99H01 Full Bridge ■ Smart power motor bridges ■ TL9000 Certificates TLE420x, L9959 VNH3xx MIC4606 TLE6208, L9960 VNH5xx ■ Infineon low-current DC motor bridge family consists of a TLE84106, VNH7xx Applications TLE84110 broad variety of bridges designed for use in automotive and STSPINbattery Dual Full Bridge STSPIN240 ■ Automotive TLE986x industrial applications ■ Industrial TLE472xx, Bipolar Driver NJM371x, BD62xxx, STSPINdigital µStepper DRIVER µStepper Controller ■ Our portfolio comprises complete end-to-end solutions for TLE844xx NJM377xx, BD638xx, with motion engine with motion engine ■ Truck NJM13775, BD639xx, L6470 L6480 low voltage as well as high voltage applications. Infineon‘s NJM2673, BD642xx, L6472 L6482 ■ Renewable energy NJM6219, L6460 family of configurable, Full-Bridge, Half-Bridge and 3-Phase NJW4382 µStepper SiP Gate Driver IC‘s can be combined with MOSFETs to provide µStepper DRIVER Controller+MOSFETS L6474 with motion engine the power and efficiency these systems demand. L6258 powerSTEP01 Motor Stepping w/Translator NJM4372, STSPINbattery µStepper DRIVER NJM4375 STSPIN220

H(Full) Bridge NJW267x, Dual Full bridge with controller Monolithic Driver ICs, Integrated Motor Driver ICs H-Bridge Driver + MOSFETs 3Phase-Bridge 2 & 3 Phase MOSFET Driver NJW437x, L6208 L6228 L6208Q L6228Q 100A Driver+MOSFETs Driver with Integrated NJW438x Half-Bridges, Full-Bridges L9942 Multi-Half-Bridges Full-Bridges ARM® CORTEX ™ Full-Bridges TrilithH a l f IC 6ED003xx MTD650xx Bipolar Process NJM262xx BA666xx, STSPIN power 3-phase Bridge TPD41xxA MLX8320x MIC4607 (TLE520xx) BTM77xx BTN89x2 BA685xx, L6229 L6229Q /AK (TLE720xx) (TLE82xxx) TLE718x BCD Process NJW430x BD667xx, L6230 L6230Q Half-Bridges (IFX9201) TLE9180 BD676xx, L6234 L6235Q Novalith IC + TLE987x BD679xx, L6235 L99ASC03 TLE9201 BTN89xx + Motor BD168xx L9907x 10A Multi-Half-Bridges (TLE6208xx) TLE987xQXxx 3Phase Brushless STSPINbattery 3-phase Bridge (TLE844xx) 6 E D003 L02- TLE986xQXxx plus 4 STSPIN230 Stepper Driver (TLE820xx) O p t i M o s 3/ T 2 MOSFETs (TLE472xx) D r i v e r I C s ( 30 V - 25 0 V ) TLE841xy ( T LE 6 28 x x x ) Driver ICs + Servo Driver ( TLEDriver 7 18 1/ 2) ICs (TLE18xxx) (TLE420xx) O(TLE7181/2) p t i M o s 3/ T 2 EiceDrivers ( 30 V - 25 0 V ) 1A 6ED003L02-F Infineon MOSFETs Infineon MOSFETs (30V bis 250V) (30V bis 300V) Infineon MOSFETs (30V bis 250V)

M M MM 3 3 MM 3 3 M 3 0,1A 12V & 24V Applications Type of Motor

39 NovalithIC™ Family NovalithICTM – New Integrated High Current Half-Bridge Motor Drivers in D2PAK Package

Infineon’s new series of NovalithIC™ devices extends the performance capabilities of integrated and protected motor drives. This series brings the advantages of particularly compact designs to applications beyond 250 W without requiring increased cooling effort. Integrated features – such as overcurrent protection, undervoltage lockout and overtemperature protection – considerably reduce design work and, at the same time, keep system costs (BOM) at a low level. By extending the voltage range up to 40 V, NovalithIC™ is now the ideal fit for many industrial electronics applications in addition to the usual automotive electronics spectrum.

The internal 3-chip structure of the NovalithIC™ family comprises a NovalithIC™with open package, half-bridge driver, an n channel MOSFET and a p-channel MOSFET in showing chip-on-chip and chip-by-chip construction chip-by-chip and chip-on-chip construction, which delivers maximum performance in the smallest space. The new family differs from the familiar BTN79xx series mainly in its use of the latest MOSFET technology for n- and p-channels. The integrated driver IC works in the In this way, five chips (half-bridge driver and four MOSFETs) can same way as before with a logic level input, and can therefore be con- be replaced by two Novalith IC™ devices in a conventional H-bridge trolled directly by the µC. The use of p-channel technology on the high application for controlling a bidirectional brushed DC motor (BDC), side switch of the motor eliminates the need to design a charge pump. which reduces the component mounting effort. What is of greater importance in many applications, however, is the space saving of about 30 %. Key Features & Benefits ■ Path resistance: - typ. 14.2mΩ @ 25°C for BTN8962TA BTN8962TA BTN8982TA - typ. 10.0mΩ @ 25°C for BTN8982TA RDSon=14.2 mΩ (path) RDSon=10 mΩ (path) Id=42 A (current limitation) Id=70 A (current limitation) ■ Low quiescent current (typ. 7µA @ 25°C) for an Recommended Applications extended battery life Automotive ■ Capable of high PWM frequency (with active power windows, sun roof, central door lock, seat positioning, front and rear wiper, 4 wheel transfer case, electronically controlled, manual transmission (ECMT), power lift gate freewheeling in BTN8962TA, BTN-8982TA) Industrial Robotics Home appliance Medical ■ Switched mode current limitation for reduced power dissipation in overcurrent condition Application ■ Integrated over/undervoltage, overtemp., overcurrent protection and analog current sense to minimize the external components required ■ Status flag diagnosis w. current sense capability ■ Driver circuit with logic level inputs ■ Option for on-board kilis offset calibration BTN89x2TA BTN89x2TA BTN89x2TA ■ Operating voltage range up to 40V ■ Enhanced switching speed with adjustable slew rate for optimized EMI and reduced switching losses ■ Package D2PAK (TO263-7)

40 Higres bild wird noch benötigt

TLE987x Infineon® Embedded Power IC 3-Phase Motor Driver with integrated ARM® Cortex™ M3 MCU

The TLE987x is a single chip 3-Phase motor driver that integrates the industry standard ARM®. Cortex™ M3 core, enabling the implementation of advanced motor control algorithms such as field-oriented control. It includes six fully integrated NFET drivers optimized to drive a 3-Phase motor via six external power NFETs, a charge pump enabling low voltage operation and programmable current along with current slope control for optimized EMC behavior. Its peripheral set includes a current sensor, a successive approximation ADC synchronized with the capture and compare unit for PWM control and 16-bit timers. A LIN transceiver is also integrated to enable communication to the device along with a number of general purpose I/Os. It includes an on-chip linear voltage regulator to supply external loads. It is a highly integrated automotive qualified device enabling cost and space efficient solutions for mechatronic BLDC motor drive applications such as pumps and fans.

Product Name Frequency Interface RAM [KB] Flash [KB] EEPROM OP-AMP Low Side OSFET High Side [MHz] emulation [KB] Drivers MOSFET Drivers TLE9871QXA20 24 PWM 3 36 4 y 3 3 TLE9877QXA20 24 PWM + LIN 6 64 4 y 3 3 TLE9877QXA40 40 PWM + LIN 6 64 4 y 3 3 TLE9879QXA20 24 PWM + LIN 6 128 4 y 3 3 TLE9879QXA40 40 PWM + LIN 6 128 4 y 3 3

Features Benefits ■ ARM® Cortex™ M3 MCU ■ Complete system-on-chip ■ System clock up to 40MHz for BLDC motor control ■ Up to 128KB Flash memory ■ Minimum number of exter- BTN8962TA BTN8982TA ■ 4K EEPROM emulation nal components reduce RDSon=14.2 mΩ (path) RDSon=10 mΩ (path) Id=42 A (current limitation) Id=70 A (current limitation) ■ NFET drivers with charge pump BOM cost ■ Current programmable NFET ■ PG-VQFN package with Recommended Applications Automotive driver with patented slope 7 x 7mm footprint enable power windows, sun roof, central door lock, seat positioning, front and rear wiper, 4 wheel transfer case, TLE987x Block diagram electronically controlled, manual transmission (ECMT), power lift gate control for optimized EMC PCB space saving

behavior Smart BLDC Module UART1 Internal External LIN ■ Integrated LIN transceiver Applications LIN (LIN) Supply Supply +12V Application Transceiver 5V, 1.5V 5V compatible with LIN ■ Fuel pump UART2 (LIN) Oscillator 2 Stage Charge standard 2.2 and ■ HVAC blower Pump 32-bit ARM® ■ SAE J2602 ■ Engine cooling fan Cortex™ M3 GPIO SSC1 Flash BLDC Motor ■ Support fast programming ■ Water pumps (SPI) up to 128K 3-Phase via LIN ■ High efficiency BLDC SSC2 RAM MOSFET 3~ (SPI) up to 6K Driver

■ Direct Memory Access (DMA) pumps and fans Timer ROM Analog/ T2, T21, T3 Digital CAPCOM6 ■ 10-bit SAR ADC for sensing ■ Sensor-less and sensor-based Inputs Timer GPT12 Diagnosis 8-bit ADC Current ■ Timers for PWM signal genera- BLDC motor applications MON 10-bit Sense tion for 3-Phase motor control controlled by the Local HV ADC Watchdog OP ■ On chip oscillator & PLL Interconnect Network (LIN) HV Analog Low Voltage ■ AECQ-qualified or PWM

41 A unique Motor Driver Product Portfolio

PowerSTEP01 NEW L62xx Series Micro-stepping motor driver with advanced control Robust, Reliable, Scalable logic and very low Rdson F7 series MOSFETs A Family of STSPIN Motor Drivers Fully intergated motor driver ICs provide complete solutions for PowerSTEP01 is a micro-stepping driver capable to drive both driving stepper, brush, and brushless DC motors, controllers phases of a bipolar stepper motor. Thanks to the embedded low and drivers combined in one chip. RDSON MOSFETs (16 mΩ) it can deliver high power while keeping power dissipation at a very low level. Features ■ Mixed signal DMOS power technology Features ■ 8VDC to 52VDC operating voltage ■ Intended for 2 phase bipolar stepper motor ■ Output current 2.8A DC (5.6A Pk) ■ Voltage & current control modes supported L620x Series, 1.4A DC (2.8A Pk) ■ Resolution up to 128μsteps ■ PowerSO, SO, DIP and tiny QFN packages ■ Motion control engine for ■ Extensive diagnostics autonomous movement ■ Non-dissipative high side OC sensing and OC protection ■ Speed and positioning commands ■ Capable to drive 10A r.m.s. @ 85V (max.) Applications ■ Achievable power up to approx. 850W ■ Automation ■ Factory automation ■ Office automation ■ Medical equipment ■ Vending machines ■ Industrial

STSPINTM Family Positioning

S ystem-in -p ac k ag e driv ers: P OW E RS TE P 01 Mon ol ith ic driv ers L6 4 7 0, L6 4 7 2 L6 4 7 4 L6 22x L6 20x Mon ol ith ic l ow v ol tag e driv ers* S TS P I N 220, S TS P I N 23 0, C on trol l ers: S TS P I N 24 0 L6 4 8 0, L6 4 8 2

10 W 50 W 100 W 350 W P ortabl e, B attery P ow ered Medic al , S ec u rity, ATM, V en din g , S tag e Lig h tin g I n du strial , F ac tory Au tomation 3 D P rin ters, Domotic s

42 * I n d e v e l o p m e n t L647x Series L6480/82

STSPIN – Future in Motion STSPIN – Fits for High Power

Smoothness and precision like never before A quantum leap of innovation in micro-stepping controllers for external MOSFETs with embedded motion control engine. Monolithic SPI digital micro-stepping drivers featuring innovative control techniques. The L6470 motor driver pro vides fully The L6480 is an advanced micro-stepping motor controller with digital motion control with no need for a dedicated MCU to integrated gate drivers to allow bipolar stepper motor driving using perform speed profile and positioning calculations. The digital external MOSFETs. This enables to reach much higher power vs. control core, together with the innovative voltage-mode driving the fully integrated drivers. The chip implements highly precise operation, result in a position resolution of up to 128 micro-steps voltage mode control with resolution up to 128 micr o st eps and smoother motion. The fast SPI interface, with daisy chain and motion control engine capable to perform positioning & capability, allows a single MCU to control multiple devices. speed commands with programmable profiles. The chip achieves Reduced resonance, noise and vibration at low speed make the excellent smoothness and wide range of speeds at the drive. overall application silent, smooth and better performing. Features Features ■ 7.5 to 85 V operating voltage ■ Mixed-signal DMOS power technology ■ Dual full bridge gate driver for N-channel MOSFETs ■ 8 to 45 V operating voltage ■ Fully programmable gate driving ■ Output current: 3ARMS (7A peak), Rds(on) = 0.28 Ω ■ Embedded Miller clamp function ■ L6470: Voltage mode driving featuring up to 128 microsteps ■ Programmable speed profile ■ L6472/74: Current control with up to 16 microsteps, ■ L6480: Voltage mode control, resolution up to 128 microsteps, adaptive decay mechanism (ST patented) sensorless stall detection ■ L6472: Advanced predictive current control ■ L6482: Predictive current control with adaptive decay, ■ L6470/72: Fully programmable speed profile and positioning resolution up to 16 microsteps ■ Integrated current sensing (no external shunt) ■ SPI interface with daisy-chaining support for configuration, ■ Full set of diagnostic and protection functions embedded control & diagnostics ■ Integr. 16 MHz oscillator, 5-bit ADC & 3V voltage regulator ■ Integrated 15/7.5V & 3.3V voltage regulators ■ 5Mbit/s SPI interface supporting daisy chaining ■ 5bit ADC embedded ■ Available in HTSSOP & PowerSO packages to match wide ■ Fully protected range power ratings Applications Applications ■ Industrial ■ Industrial ■ Consumer - X-Y position and - Stage lighting - Digital still cameras rotation systems - ATM, POS - Game consoles - Medical equipment - Textile machines - Gambling machines - Professional printers - Factory automation ■ Computers and peripherals - Stage lighting - Security - Printers - ATM, POS - Medical equipment - Textile machines - Vending machines - Factory automation ■ Security ■ Consumer - Sewing machine ■ Vending machines ■ Gambling machines 43 Low Power H-Bridge Drivers Be in Motion

The BD16910EFV-M/BD16925EFV-M Automotive H-Bridge Applications Drivers provide 1A output current per channel and support four ■ Automotive ■ Home ■ Medical operating modes (normal rotation, reverse rotation, stop, break) ■ Industrial appliances (has to be requested separately) which are selectable by two input signals. They are contributing to high reliability, energy-saving, and low system cost because of high integration, low on-resistance and small packages. Three-phase Brushless Motor Pre-Driver 60V Max. BD16805FV-M The BD16805FV-M is a three phase motor driver for air conditio- Automotive 1Ch 60V Max, H-bridge Drivers ner and blower motor, as well as battery cooling and seat cooling fan BD16910EFV-M motor. This IC provides a silent drive characteristics by implementing ■ 1 Built-in 1.0A DMOS H bridge output 1 circuit the 180° energizing drive technology and includes a built-in phase ■ 2 input control adjustment control function to increase the efficiency. Various settings (stand by, normal rotation, reverse rotation, brake) are possible to correspond to different motor controls. ■ Low stand by current ■ 180° drive controller with Hall sensor ■ Built-in reverse current protection diode ■ Integrated charge pump ■ Built-in overcurrent protection circuit ■ Maximum VIN rating: 60V (detection and timer) ■ Forward/reverse function ■ Built-in overpower-supply voltage output ■ Motor lock protection OFF function ■ FG output: 1phase/3phase-composition ■ Built-in thermal shutdown (TSD) ■ Speed control with DC input or PWM input ■ Built-in protection state output (PO) terminal ■ Programmable recovery time from mute mode ■ Over current protection (OCP) with adjustable limit ■ Under voltage protection (UVLO) Automotive 2Ch 60V Max, H-bridge Drivers ■ Over voltage protection (OVP) BD16925EFV-M ■ Thermal shut down (TSD) ■ 1 Built-in 1.0A DMOS H bridge output 2 circuit ■ 2 input control (stand by, normal rotation, reverse rotation, brake) ■ Low stand by current ■ Built-in reverse current protection diode ■ Built-in overcurrent protection circuit (detection and timer) ■ Built-in overpower-supply voltage output OFF function ■ Built-in thermal shutdown (TSD) ■ Built-in protection state output (PO) terminal

SSOP-B40

44 2EDN MOSFET EiceDRIVER™ Family Rugged, cool and fast, 2-channel low-side 5 A Driver ICs

2-channel MOSFET Driver ICs are the crucial link between digital control ICs and powerful MOSFET and GaN switching devices. MOSFET Driver ICs enable high system level efficiencies, excellent power density and consistent system robustness.

Fast, precise, strong and compatible Applications ■ Highly efficient SMPS enabled by 5 ns short slew rates and 10 ns ■ Server ■ Power tools propagation delay precision for fast MOSFET and GaN switching ■ Telecom ■ Industrial SMPS ■ Numerous deployment options due to two 5 A channels. ■ DC-DC converters ■ Motor control 1 ns channel-to-channel accuracy to use two channels in parallel ■ Bricks ■ Solar ■ Industry standard packages and pinout ease system design upgrades

The new reference in ruggedness and low power dissipation Package UVLO Inputs Product name ■ 4 V and 8 V UVLO (Under Voltage Lock Out) options for instant direct 2EDN7524F 4V MOSFET protection under abnormal conditions inverted 2EDN7523F DSO 8pin direct 2EDN8524F ■ -10 V robustness of control and enable inputs provides crucial safety 8 V inverted 2EDN8523F margin when driving pulse transformers or driving MOSFETs in direct 2EDN7524R TO-220 and TO-247 packages 4V TSSOP inverted 2EDN7523R ■ 5 A reverse output current robustness eliminates the need for 8pin direct 2EDN8524R 8V Schottky switching diodes and reduces bill-of-material inverted 2EDN8523R ■ Cool Driver ICs from true rail-to-rail low impedance output stages direct 2EDN7524G WSON 8pin 4V inverted 2EDN7523G

Product features Product benefits System benefits

■ High power efficiency ■ 5 A souce/sink current ■ Fast Miller plateau transition – in hard switching PFC with SiC diode ■ 5 ns rise/fall times ■ Precise timing – in half bridges and synchronous rectifications ■ <10 ns propagation delay precision

■ Cooler Driver IC operation ■ True rail-to-rail low impedance output stages ■ Low power dissipation in Driver IC ■ Higher MOSFET drive capability

■ 4 V and 8 V UVLO options ■ Fast and reliable MOSFET turn-off, ■ Instant MOSFET protection under abnormal ■ 19 ns propagation delay for both control and enable independent of control IC operation inputs ■ -10 V robustness of control and enable inputs ■ Increased GND-bounce robustness ■ Crucial safety margin to drive pulse-transformer

■ Increases power density ■ 5 A reverse output current robustness ■ Saves switching diodes ■ BoM savings

■ 2 independent channels ■ Option to increase drive current by truly concurrent ■ One IC covering many applications ■ Excellent 1 ns channel-to-channel accuracy switching of 2 channels ■ Industry standard pinout and packages ■ Straight forward design upgrades ■ Short time to market

45 IGBTs

IGBTs

Providing IGBTs (insulated-gate bipolar transistors) for all switching frequencies and common voltage classes, Rutronik fulfills all demands of the industry. Due to the latest hard and soft switching technologies of leading suppliers we are able to offer a high efficiency portfolio for your application. The devices offer very low switching losses, optimized thermal performance and minimal conduction losses.

Switching Frequency Infineon International Rectifier Rohm STMicroelectronics Toshiba Applications

Low IxxxN60x IRG4xxxxxx IRGBxxxxxx RGTxxxx STGxxxM60xx GTxxx Induction Heating < 20 kHz IxxxT60x IRG6xxxxxx IRGIxxxxxx RGTHxxx STGWxxH120DF Multifunction Printers IxxxN120xx IRG7xxxxxx IRGPxxxxxx STGWxxH130D Solar Inverter IxxxT120xx IRG8xxxxxx IRGRxxxxxx STGxxxN60xx Motor Controll IxxxxR60x IRGSxxxxxx STGxxxN3xLZ UPS Bridge STGxxxN4LZ Major Home Appliances

Medium SxxxN60xx IRG4xxxxxx IRGBxxxxxx RGTxxxx STGxx0H65xxFB GTxxx Induction Heating > 20 kHz < 50 kHz SxxxN120xx IRG6xxxxxx IRGIxxxxxx RGTHxxx STGxxNC60Hx Microwave IxxxN60xx IRG7xxxxxx IRGPxxxxxx STGxxNC60Kx Inverter IxxxN120xx IRG8xxxxxx IRGRxxxxxx STGxxNC60Vx Motor Controll IRGSxxxxxx Major Home Appliances

High IxxxN60xx IRG4xxxxxx RGTxxxx STGxx0V60xF GTxxx Welding Inverter > 100kHz IxxxN120xx IRGBxxxxxx RGTHxxx Inverter IRGPxxxxxx Airconditioning Washing Machine Power Supply

With antiparallel diode 2nd position "D" at the end of the product "D"at the end of the "D" at the end of the product 6th position is "3" or "R" is a "K" name product name name

IGBTs – Trench Gate Field Stop High Speed Technology

Switching Frequency Infineon International Rectifier Rohm STMicroelectronics Toshiba Applications V-Series 600V IGBTs HB-Series 650V IGBTs Low IxxxN60x IRG4xxxxxx IRGBxxxxxx RGTxxxx STGxxxM60xx GTxxx Induction Heating < 20 kHz IxxxT60x IRG6xxxxxx IRGIxxxxxx RGTHxxx STGWxxH120DF Multifunction Printers IxxxN120xx IRG7xxxxxx IRGPxxxxxx STGWxxH130D Solar Inverter ST’s new 600V IGBTs – “V series” (very high speed), based on an Leveraging latest ST’s advanced Trench Gate Field-Stop High- IxxxT120xx IRG8xxxxxx IRGRxxxxxx STGxxxN60xx Motor Controll IxxxxR60x IRGSxxxxxx STGxxxN3xLZ UPS Bridge advanced proprietary trench gate field-stop structure, represent an Speed technology the HB series IGBTs combine this picture turn- STGxxxN4LZ Major Home Appliances optimum compromise between conduction loss and switching loss to off efficiency with a very low saturation voltage (VCE(SAT)) down Medium SxxxN60xx IRG4xxxxxx IRGBxxxxxx RGTxxxx STGxx0H65xxFB GTxxx Induction Heating > 20 kHz < 50 kHz SxxxN120xx IRG6xxxxxx IRGIxxxxxx RGTHxxx STGxxNC60Hx Microwave maximize the efficiency of very high frequency converters. to 1.6 V (typical). In addition to the above features the extended IxxxN60xx IRG7xxxxxx IRGPxxxxxx STGxxNC60Kx Inverter voltage rating (BVCES) at 650 V, the maximum operating junction IxxxN120xx IRG8xxxxxx IRGRxxxxxx STGxxNC60Vx Motor Controll IRGSxxxxxx Major Home Appliances It also reveals the world’s lowest Eoff . The series’s current rating from temperature (TJ) of 175 °C and a wide Safe Operating Area (SOA) High IxxxN60xx IRG4xxxxxx RGTxxxx STGxx0V60xF GTxxx Welding Inverter 20 A to 80 A with multiple packages options, and with safe parallel results in an increased robustness and so reliability and lifetime. > 100kHz IxxxN120xx IRGBxxxxxx RGTHxxx Inverter IRGPxxxxxx Airconditioning operation for even higher power requirements. The HB series enhance the energy efficiency of solar inverters, Washing Machine induction heaters, welders, uninterruptible power supplies, power- Power Supply Features factor correction, and other high-frequency power converters. With antiparallel diode 2nd position "D" at the end of the product "D"at the end of the "D" at the end of the product 6th position is "3" or "R" is a "K" name product name name ■ Very high speed switching frequency up to 120 KHz ■ Low saturation voltage VCE(sat) = 1.8 V (typ.) @ Icn Features ■ Tail-less switching off ■ Maximum junction temperature: TJ = 175 °C ■ Tight parameter distribution & derating with temperature ■ Very low & minimized tail in switching-off ■ Safe paralleling with positive derating of VCE(sat) with ■ VCE(SAT) = 1.6 V (typ.) @ ICN(100 °C) temperature ■ Positive derating of VCE(SAT) with temperature ■ Low thermal resistance ■ Tight parameters distribution ■ Co-packed different feature diode for different application ■ Co-packed different feature diode

Benefits Benefits ■ The lowest total power loss in the market for energy saving ■ Higher robustness and reliability ■ The lowest Eoff in the market for higher speed switching ■ Increase system efficiency for energy saving ■ Easy paralleling for power scalability ■ Safer paralleling operations ■ 175 °C junction temp. for higher robustness and reliability ■ Specific diode option for different applications

1 2 Switching Switching Part BVCES ICN VCE(sat) FRD BV I 1 V 2 FRD Freq. Part Number CES CN CE(sat) Freq. Number (V) (A) (V) Option (V) (A) (V) Option Range Range D2PAK TO-220 TO-220FP TO-247 TO-3P TO-3PF D2PAK TO-247 TO-3P TO-3PF MAX-247

STGx20V60F 20 1.8 20-120 kHz - B P W WT FW STGx20H65FB 650 20 1.6 8 - 50kHz - W WT FW STGx20V60DF 20 1.8 20-120 kHz Very fast B P F W WT FW STGx30H65FB 650 30 1.6 8 - 50kHz - W WT FW STGx30V60F 30 1.85 20-120 kHz - B P W WT FW STGx30H60DFB 600 30 1.6 8 - 50kHz Very Fast W WT FW STGx30V60DF 30 1.85 20-120 kHz Very fast B P F W WT FW STGx30H60DLFB 600 30 1.6 8 - 50kHz3 Low Drop B W STGx40V60F 40 1.8 20-120 kHz - B P W STGx40H65FB 650 40 1.6 8 - 50kHz - W WT FW

STGx40V60DF 600 40 1.8 20-120 kHz Very fast W WT FW STGx40H65DFB 650 40 1.6 8 - 50kHz Very Fast W WT STGx40V60DLF 40 1.8 20-120 kHz3 Low drop W WT STGx40H60DLFB 600 40 1.6 8 - 50kHz3 Low Drop W WT STGx60V60F 60 1.85 20-120 kHz - W STGx60H65FB 650 60 1.6 8 - 50kHz - W WT STGx60V60DF 60 1.85 20-120 kHz Very fast W WT STGx60H65DFB 650 60 1.6 8 - 50kHz Very Fast W WT STGx60V60DLF 60 1.85 20-120 kHz3 Low drop W WT STGx60H60DLFB 600 60 1.6 8 - 50kHz3 Low Drop W WT STGx80V60F 80 1.85 20-120 kHz Very fast W WT STGx80H65DFB 650 80 1.6 8 - 50kHz Very Fast W WT Y STGx80V60DF 80 1.85 20-120 kHz Very fast W WT

1 I : IGBT nominal collector current @ TJ = 100 °C | 2 V ): typical conduction losses @ I , TJ = 25 °C | 3 Soft Switching Type CN CE(sat CN 47 Field Stop Trench IGBTs – For High Voltage and High Current Applications

ROHM‘s IGBTs (Insulated Gate Bipolar Transistors) contribute to high efficiency and low energy consumption of high voltage and high current applications enabling the realization of low operating loss and low switching noise. ROHM expands its portfolio of power devices and contributes to a low consumption society.

Series Features & Benefits Applications ■ RGT series designed optimize to use converter ■ Low collector - Emitter Saturation Voltage ■ General inverter ■ RGT series are suitable for inverters ■ Low switching loss ■ UPS ■ RGPx series is designed to igniter and it follows ■ Short circuit withstand time 5us ■ Power conditioner AEC-Q101 ■ Built-in very fast & soft recovery FRD (RFN-series) ■ Welder ■ Igniter

Show/Hide VCES IC (100°C) VCE(sat) (Typ.) tsc (Min.) Built-in VGE(th) (Min.) Package [V] [A] [V] [µs] Diode [V]

RGT16NS65D 650 8 1.65 5 FRD 5 LPDS

RGT30NS65D 650 15 1.65 5 FRD 5 LPDS

RGT40NS65D 650 20 1.65 5 FRD 5 LPDS

RGT40TS65D 650 20 1.65 5 FRD 5 TO-247N

RGT50TS65D 650 25 1.65 5 FRD 5 TO-247N

RGT60TS65D 650 30 1.65 5 FRD 5 TO-247N

RGT80TS65D 650 40 1.65 5 FRD 5 TO-247N

RGT8BM65D 650 4 1.65 5 FRD 5 TO-252

RGT8NS65D 650 4 1.65 5 FRD 5 LPDS

RGT00TS65D 650 50 1.65 5 FRD 5 TO-247N

RGTH00TS65 650 50 1.6 - - 4.5 TO-247N

RGTH00TS65D 650 50 1.6 - FRD 4.5 TO-247N

RGTH40TS65 650 20 1.6 - - 4.5 TO-247N

RGTH40TS65D 650 20 1.6 - FRD 4.5 TO-247N

RGTH50TS65 650 25 1.6 - - 4.5 TO-247N

RGTH50TS65D 650 25 1.6 - FRD 4.5 TO-247N

RGTH60TS65 650 30 1.6 - - 4.5 TO-247N

RGTH60TS65D 650 30 1.6 - FRD 4.5 TO-247N

RGTH80TS65 650 40 1.6 - - 4.5 TO-247N

RGTH80TS65D 650 40 1.6 - FRD 4.5 TO-247N

48 650 V TRENCHSTOP™ 5 Introducing a Technology to Match Tomorrow’s High Efficiency Demands

Infineon’s TRENCHSTOP™ 5 IGBT technology redefines best-in-class IGBT by providing unmatched performance in terms of efficiency for hard switching applications. The family is a major breakthrough in IGBT innovation to match the market’s high efficiency demands of tomorrow. When high efficiency, lower system costs and increased reliability are demanded, TRENCHSTOP™ 5 is the only option. The TRENCH- STOP™ 5 IGBTs deliver a dramatic reduction in switching and conduction losses.

The TRENCHSTOP™ 5 technology will be used as the basis of two families. The first family, the HighSpeed 5 (H5), is available for the ease of use/plug and play replacement of existing IGBTs. It is a soft high speed IGBT requiring low design-in efforts. The second family, the High- Speed 5 FAST (F5), requires higher design-in effort, but offers the highest ever efficiency seen by an IGBT, for example more than 98% system efficiency has been observed in application measurements in a photovoltaic inverter using a H4 bridge. Both are released with and without a 650 V anti-parallel free-wheeling hyper-fast silicon diode (FWD), where the hyper-fast diode is an Infineon developed diode technology from Infineon’s proprietary Rapid diode family.

Features ■ 650 V breakthrough voltage Benefits Applications ■ Compared to Infineon’s best-in-class HighSpeed 3 family ■ Best-in-class efficiency, resulting in ■ PFC + PWM topologies in - Factor 2.5 lower Qg lower junction and case temperature welding, uninterruptible - Factor 2 reduction in switching losses leading to higher device reliability power suppliers (UPS), - 200 mV reduction in VCE(sat) ■ 50 V increase in the bus voltage possi- solar ■ Co-packed with Infineon’s new Rapid Si-diode technology ble without compromising reliability ■ Low Coes/Eoss ■ Higher power density designs ■ Mild positive temperature coefficient VCE(sat) ■ Temperature stability of Vf

Continuous Collector TO-220 TO-220 FullPAK TO-247-3 TO-247-4 Current [A] @ Tc = 100°C 20 IGP20N65F5 / H5 30 IGP30N65F5 / H5 40 IGP40N65F5 / H5 IGW40N65F5 / H5 Single IGBT 50 IGW50N65F5 / H5 IGZ50N65H5 75 IGW75N65H5 IGZ75N65H5 100 IGZ100N65H5 8 IKP08N65F5 / H5 IKA08N65F5 / H5 15 IKP15N65F5 / H5 IKA15N65F5 / H5 20 IKP20N65F5 / H5 DuoPack 30 IKP30N65F5 / H5 IKW30N65H5 40 IKP40N65F5 / H5 IKW40N65F5 / H5 50 IKW50N65F5 / H5/ EH5 IKZ50N65EH5 / IKZ50N65NH5 75 IKW75N65EH5 IKZ75N65EH5 / IKZ75N65NH5

49 Power MOSFETs

Rutronik is a leading global provider for MOSFETs of the world‘s well-known suppliers. MOSFETs (metal-oxide-semiconductor field-effect transistor) are usable for applications in the automotive segment as well as in the field of industrial and consumer. We provide you with a large product range including P-Channel, N-Channel and Dual MOSFETs for applications with voltage classes starting from -600V up to 1500V.

Supplier Range / Series

-400 -300 -250 -200 -150 -100 -80 -70 -60 -55 -50 -45 -40 -30 -25 -20 -12 -8 0 8 12 20 24 25 30 33 40 45 50 55 60 70 75 80 100 120 150 190 200 250 300 330 400 450 500 525 550 600 620 650 700 800 900 950 1000 1050 1200 1500 Diodes P-CH, N-CH A A A A A A A A A A A A A A A A A A A A A A A A A A A A A

2xP-CH, A A A A A A A A A A A A A A A A A A A A A A A A A A A A A 2xN-CH P+N-CH A A A A A A A A A A A A A A A A A A A A A A A A A A A Inﬁneon P-CH, N-CH A A A A A A A A A A 2xN-CH A A A A A P+N-CH A A A A A A A A A A A IR P-CH, N-CH A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A

2xP-CH, A A A A A A 2xN-CH P+N-CH A A A A A A A A A A A Microchip N-CH Panjit P-CH, N-CH 2xP-CH Renesas P-CH, N-CH A A A A A A A A A A A A A A A A A A A A A

2xP-CH, A A A A A A A A A A A A A A A 2xN-CH ROHM P-CH, N-CH A A A A A A A A A A A A

2xP-CH, A A A A 2xN-CH P+N-CH A A A A A A A SiC ST P-CH, N-CH A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A

2xP-CH, A A A A A A A A A A A 2xN-CH P+N-CH SiC Toshiba P-CH, N-CH A A A A A A A A A A A A A A A A A A

2xP-CH, A 2xN-CH P+N-CH A A Vishay P-CH, N-CH A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A

2xP-CH, A A A A A A A A A A A A A A A A A A 2xN-CH P+N-CH A A

A = also available as AECQ

50 Power MOSFETs

Our Power MOSFETs support high efficiency requirements in all necessary terms: ■ Minimum conduction losses ■ Low switching losses ■ Extremely low RDSon ■ Optimized gate charge

2xP-CH, A A A A A A 2xN-CH P+N-CH A A A A A A A A A A A Microchip N-CH Panjit P-CH, N-CH 2xP-CH Renesas P-CH, N-CH A A A A A A A A A A A A A A A A A A A A A

2xP-CH, A A A A A A A A A A A A A A A 2xN-CH ROHM P-CH, N-CH A A A A A A A A A A A A

2xP-CH, A A A A 2xN-CH P+N-CH A A A A A A A SiC ST P-CH, N-CH A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A

2xP-CH, A A A A A A A A A A A 2xN-CH P+N-CH SiC Toshiba P-CH, N-CH A A A A A A A A A A A A A A A A A A

2xP-CH, A 2xN-CH P+N-CH A A Vishay P-CH, N-CH A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A

2xP-CH, A A A A A A A A A A A A A A A A A A 2xN-CH P+N-CH A A

51 40 V and 60 V StrongIRFET™ Logic Level Gate Drive

Infineon introduces an extension of the successful StrongIRFET™ family for battery-powered applications. The logic level gate drive allows designers to drive MOSFETs with only 5 V VGS. This is ideal in applications where standard gate drive is not available such as motor drives, BLDC motor drives and battery powered circuits.

The family maintains the same characteristics of the StrongIRFET™ family which include low RDS(on) for reduced conduction losses, high current carrying capability for increased power capability and rugged silicon for robustness.

The flagship product is the IRL7472L1 which is available in the proprietary Large Can DirectFET™ package, enabling the lowest RDS(on) in the market (0.97 mΩ max at 4.5 V) for a 67 mm solution. The DirectFET™ features excellent top-side cooling, low package profile, and contains zero lead which complies with future RoHS requirements.

Applications Features & Benefits ■ Brushed motor drive applications ■ Designed for industrial applications ■ BLDC motor drive applications ■ Ideal for low switching frequency ■ Battery powered circuits ■ High current carrying capability ■ Light electric vehicles ■ 4.5 V logic level optimized ■ Power tools ■ Rugged silicon ■ Electric toys ■ Low RDS(on)

Part Number Breakdown Package Current RDS(on) typ/max Voltage (V) (Outline) rating (A) at 4.5 V (mΩ)

IRL7472L1TRPBF 40 Large Can DirectFET™ 375 0.59/0.97 package (L8)

IRL7486MTRPBF 40 Medium Can 209 1.25/2.00 DirectFET™ package (ME)

IRL40B209 40 TO-220 195 1.25/1.60

IRL40B212 40 TO-220 195 1.90/2.40

IRL40S212 40 D2PAK 195 1.90/2.40

IRL40B215 40 TO-220 120 2.70/3.50

IRL60B216 60 TO-220 195 1.90/2.20

52 600 / 650 V CoolMOS™ C7 Series Market leading Best-in-Class on-resistance per Package and lowest RDS(ON)

The new 600 V CoolMOS™ C7 from Infineon offers a 50% reduction in turn-off losses (Eoff) compared to the CoolMOS™ CP series, offering a GaN-like level of performance in PFC, TTF (two transistor forward) and other hard-switching topologies.

With the 650V CoolMOSTM C7 series Infineon brings a new level of performance in hard switching applications such as Power Factor Correction (PFC). It is the successor to the CP series and provides efficiency benefits across the whole load range through balancing a number of key parameters. The Best-in-Class RDS(on) leads to increased full load efficiency. Eoss reduction brings efficiency benefits at light load and the low Qg correlates to faster switching and lower Eon and Eoff which gives efficiency benefits across the whole load range. The applications where the efficiency and the TCO (total cost of ownership) are the major concerns, get high benefits with the new 600V CoolMOSTM C7. Best fitting applications areas are Telecom, Server, Solar, UPS and PC Power.

Features 600 V Features 650 V ■ Reduced switching loss parameters enabling higher switching freq. ■ Revolutionary Best-in-Class RDS(on) / package ■ 50% Eoss reduction compared to older CoolMOS™ CP technology and ■ Reduced energy stored in output capacitance (Eoss) close to GaN ■ Lower gate charge Qg ■ Lowest RDS(on)* A in the world (<1 Ω/mm) ■ Space saving through use of smaller packages or reduction ■ Improved body diode and low QOSS Value of parts

Benefits Benefits ■ 30% material cost reduction in magnetic components, increasing ■ Improved safety margin and suitable for both SMPS the frequency from 65 kHz to 130 kHz and solar inverter applications ■ Leading to 50% lower inductor value for smaller form factors ■ Lowest conduction losses / package ■ 10% TCO saving for PSU energy losses with combination of ■ Low switching losses & better light load efficiency TO-247 4pin package and 600 V CoolMOS™ C7 ■ Increasing power density ■ Smaller packages for same RDS(on) lead to power density benefits ■ Higher frequency capability thanks to lower Eoss and Qg losses

RDS(on) max [mΩ] DPAK D²PAK ThinPAK 8x8 TO-220 TO-220 FP TO-247 TO-247-4 225/230 IPD65R225C7 IPB65R225C7 IPL65R230C7 IPP65R225C7 IPA65R225C7 190/195 IPD65R190C7 IPB65R190C7 IPL65R195C7IPP65R190C7 IPA65R190C7 IPW65R190C7 180/185 IPD60R180C7 IPB60R180C7 IPL60R185C7 IPP60R180C7 IPA60R180C7 IPW60R180C7 IPB65R125C7 IPL65R130C7 IPP65R125C7 IPA65R125C7 IPW65R125C7 120/125/130 IPB60R120C7 IPL60R125C7 IPP60R120C7 IPA60R120C7 IPW60R120C7 IPB65R095C7 IPL65R099C7 IPP65R095C7 IPA65R095C7 IPW65R095C7 IPZ65R095C7 95/99/104 IPB60R099C7 IPL60R104C7 IPP60R099C7 IPA60R099C7 IPW60R099C7 IPZ60R099C7 IPB65R065C7 IPL65R070C7 IPP65R065C7 IPA65R065C7 IPW65R065C7 IPZ65R065C7 60/65/70 IPB60R060C7 IPL60R065C7 IPP60R0607 IPA60R060C7 IPW60R060C7 IPZ60R060C7 IPB65R045C7 IPP65R045C7 IPW65R045C7 IPZ65R045C7 40/45 IPA65R045C7 IPB60R040C7 IPP60R040C7 IPW60R040C7 IPZ60R040C7 IPW65R019C7 IPZ65R019C7 17/19 IPW60R017C7* IPZ60R017C7*

*available in 2016 53 State-of-the-art MOSFETs Technologies

SCT30N120: ST’s first Silicon Carbide Power Mosfet Based on the advanced and innovative properties of wide bandgap materials, ST’s silicon carbide (SiC) MOSFETs feature very low RDS(on) per area for the 1200 V rating combined with excellent switching performance, translating into more efficient and compact designs. ST is among the first companies to produce high-voltage SiC MOSFETs and the first member of this new family features the industry’s highest temperature rating of 200°C for improved thermal design of power electronics systems. Compared to silicon MOSFETs, SiC MOSFETs also feature significantly reduced switching losses with minimal variation versus the temperature. Features Applications ■ Very tight variation of ■ Very fast and robust ■ Solar inverters, UPS on-resistance vs. temp. intrinsic body diode ■ Motor drives ■ Slight variation of swit- ■ Easy to drive ■ High voltage DC-DC converters ching losses vs. temp. ■ Extremely low power losses ■ Switch mode power supply ■ Very high operating ■ High operating frequencies BVDSS [V] RDS (on) [Ω] ID [A] Qg [nC]T j max [°C] P/N Package temp. capability (200 °C) reduction of bulky 1200 0.08 45 105 200 SCT30N120 HiP247 ■ Low capacitance passive components 1200 0.16 25 45 200 SCT20N120 HiP247

TM MDmesh K5 V R (on) I Q P/N Package TM DS DS D g The MDmesh K5 represents the 5th generation of the well- [V] (max) [Ω] [A] [nC] known, very-robust SuperMESHTM technology of ST, now in the 800 4.5 2 9 STx2N80K5 DPAK / TO-220 / FP/ PowerFLAT 5x6 VHV, IPAK optimized version able to reduce the RDS(on) of around 30% 3.5 2.5 9.5 STx3N80K5 DPAK / IPAK/ TO-220 / FP/ PowerFLAT 5x6 VHV with respect to previous generation. 2.5 3 10.5 STx4N80K5 DPAK / TO-220 / PowerFLAT 5x6 VHV / IPAK 1.6 4.5 13 STx6N80K5 DPAK / TO-220 / TO-220FP/D2PAK/I2PAK 1.2 6 13.4 STx7N80K5 TO-220 / TO-220FP / DPAK / I2PAKFP / IPAK / The horizontal geometry of the device has been optimized, so that PowerFLAT 5x6 VHV the parasitic capacitances are now 30% lower. 0.95 6 16.5 STx8N80K5 TO-220 / TO-220FP/I2PAKFP/DPAK/IPAK/ PowerFLAT 5x6 VHV 0.6 8 25 STx10N80K5 TO-220FP Features Applications 0.45 12 29 STx13N80K5 TO-220 / TO-220FP / TO-247/D2PAK/I2PAKFP ■ 800V-1200V lowest RDS(on)*area ■ SMPS 0.375 14 32 STx15N80K5 TO-220 / TO-220FP / TO-247 / D2PAK ■ Qg minimized ■ LED Driver 0.26 19.5 40 STx25N80K5 TO-220 / TO-220FP / TO-247/D2PAK 850 0.275 19 38 STW23N85K5 TO-247 ■ Lowest FOM: RDS(on)*Qg ■ Standby SMPS 900 0.299 18.5 43 STx21N90K5 TO-220 / FP / D2PAK / TO-247 ■ Designed for highest efficiency ■ Metering 950 5 2 10 STx2N95K5 TO-220 / FP / DPAK / IPAK ■ Lighting 2.5 3.5 12.5 STx5N95K5 TO-220 / FP / DPAK Benefits ■ μ-Inverter 1.25 9 13 STx6N95K5 TO-220 / FP / DPAK / IPAK / TO-247 0.8 8 22 STx10N95K5 TO-220 / TO-220FP/ TO-247/D2PAK ■ Higher energy saving 0.5 12 30 STx15N95K5 TO-220 / TO-220FP/ TO-247 ■ Faster switching speed 0.33 17.5 40 STx20N95K5 TO-220 / TO-220FP/ TO-247/D2PAK ■ Increased safety margin 0.13 35 80 STW40N95K5 TO247 ■ TO-3PF and H2PAK for 1050 8 1.5 10 STx2N105K5 DPAK / IPAK / TO-220 / TO-3PF 3.5 3 12 STx5N105K5 TO-220 / FP higher creepage 2 4 17 STx7N105K5 TO-247/ TO-220 / FP / IPAK 1.3 6 21 STx10N105K5 TO-220 / TO-220FP/ TO-247 1200 0.69 12 44 STx12N120K5* TO-220 / TO-3PF / TO-247 / H2PAK / TO-220FP / TO-247LL 1500 1.9 6 42 STx12N150K5* TO-3PF / TO-247

*Coming soon

54 TM STripFET F7 Part Number BV RDS [mW] Qg [nC] STripFETTM F7 low-voltage MOSFETs set new class standard for on-state [V] max 10V

SMD TH H2PAK TO- 220FP TO-220 DPAK 5 x 6 3.3x3.3 5x6 DI resistance, enhancing energy efficiency and reliability of telecom, ser- STx270N8F7 80 2.1 2.5 193 x x ver, industrial and automotive applications. ST’s series of 80 and 100 V STx170N8F7 3.6 4.1 120 x x x STripFETTM F7 MOSFETs feature an enhanced trench-gate structure that STx140N8F7 4 4.3 96 x x x lowers device on-state resistance while also reducing internal capacitances STL130N8F7 3.6 x STLyN8F7 4.4 60 x and gate charge for faster and more efficient switching. The devices also STxyN8F7-2 5 5.8 x x have high avalanche ruggedness making them ideal for rugged designs. STLyN8F7 6.1 45 x Thanks to the new gate structure, high power design can be simplified by STxyN8F7 7.5 x x STx310N10F7 100 2.3 2.7 180 x x reducing the number of paralleled devices. Also, with the improved figure STx240N10F7 3 3.2 176 x x of merit and recovery diode, this technology is also ideal for STx150N10F7 3.9 4.2 117 x x x high frequency switching applications. STL110N10F7 6 72 x STx110N10F7 6.7 7 x x x STL100N10F7 7.3 61 x Features STx100N10F7 8 8 x x x x ■ High avalanche capability STL90N10F7 9.5 39 x ■ Optimized body diode STx80N10F7 9.5 10 x x x x STL60N10F7 18 25 x ■ High junction temperature (175 °C) STx45N10F7 18 18 x x STL8N10F7 20 x Benefits STL40N10F7 24 19 x Applications STx30N10F7 24 24 x x ■ Low conduction losses ■ Automotive STL30N10F7 35 14 x ■ Small form factor of final system STx25N10F7 35 35 x x x ■ Industial ■ Excellent behavior to EMI STL7N10F7 35 x ■ Motor control STL20DN10F7 67 8 x ■ Robust design ■ SMPS STL4N10F7 70 x STL3N10F7 70

MDmeshTM M2 650V

Power supply designers have now the necessity to increase the power Sales Type Max RDS Max ID Qg Packages density and have an efficient thermal management. An answer to this [Ω] [A] [nC] goal is in using resonant topologies and moreover in the use of LLC reso- STx6N65M2 1.3 3.5 5.5 IPAK / DPAK / D2PAK/ TO-220 / TO-220FP nant converter. For these topologies, the MOSFET parasitic capacitances STx7N65M2 1.15 4.5 6.5 IPAK / DPAK / TO-220 / TO-220FP STL8N65M2 1.25 4 6.5 PowerFLAT 5x6 HV can affect the total behaviors increasing switching losses and decreasing STx9N65M2 0.900 5 8 IPAK / DPAK / TO-220 / TO-220FP efficiency. The profile of the output capacitances influences the switching STL9N65M2, 1 4.5 8 PowerFLAT 5x5, operation and determines the total performance of the system. STL10N65M2 PowerFLAT 5x6 HV STx11N65M2STx11 0.680 7 11 IPAK / DPAK / TO-220 / TO-220FP / I2PAKFP / TO-220FP NL Benefits Applications STL11N65M2, 0.750 5* 11 PowerFLAT 5x5, ■ Low conduction and switching losses ■ SMPS STL12N65M2STL12 *PowerFLAT 5x6 HV STx12N65M2STx12 0.500 9 14 TO-220 / DPAK / TO-220FP in PFC and soft switching topologies ■ LED driver STx13N65M2STx13 0.430 10 16 IPAK / DPAK / TO-220/FP/I2PAKFP ■ Optimized for light load conditions ■ Adapters STL13STL13N65M2 0.475 TBD 16 PowerFLAT 5x6 HV ■ Especially targeted resonant topologies ■ Micro inverter STx16N65M2STx16 0.360 11 19 IPAK / DPAK / TO-220/TO-220FP ■ Easy to drive ■ Servers STL16N65M2 0.395 7.5 19 PowerFLAT 5x6 HV STx18N65M2 0.330 14 22 I2PAK / TO-220 / TO-220FP ■ Extremely low Qg ■ Solar STL18N65M2 0.365 8 22 PowerFLAT 5x6 HV

55 DTMOS IV - Latest Super-Junction Technology

Toshiba has developed the Gen-4 super-junction 600V to 800V DTMOS IV MOSFET series. Fabricated using the state-of-the-art single epitaxial process, DTMOS IV provides a 30% reduction in Ron*A, a figure of merit (FOM) for MOSFETs, compared to its predecessor, DTMOS III. A reduction in Ron*A leads to smaller RDSon chips in the same packages. This helps users to improve efficiency and reduce the size of power systems.

Attractive cost effects ■ Reduced heat system costs ■ Less costs of field failure ■ Less passive component costs ■ Reduced BOM costs due to most effective solutions

Smart performance increases ■ Easy design-in for faster time to market and product launch ■ Ready to support high volume markets with competitive prices

Features Benefits

■ 30% reduction in RDSon*A compared to previous generation X Reduction of chip size at same performance or improved performance at same chip size

■ Improved figure of merit (FOM) compared to DTMOS III generation X Improved electrical efficiency by reduced switching and static losses

■ Reduction in Coss X 12% reduction in switching loss, EOSS, compared to the predecessor

■ Application of latest process technology: single epitaxial process X Lower increase in on-resistance at temperature rise

■ Wide range of on-resistances and packaging options, see tables X Freedom of choice and flexibility on package and on RDSon line-up

■ 45% reduction of Qgd (gate drain Charge) at X-Series X High efficiency switching at PFC

■ 65% faster body-diode characteristic with W5/X5-Series X High efficiency switching at bridge circuitry

DTMOS-Series Applications W-Series: Standard type For general switching W5-Series: With high speed body diode For bridge circuitry, like UPS or server SMPS DTMOS IV X-Series: High speed type (H-Type) For PFC circuit X5-Series: High speed type with high speed body diode For bridge circuitry, like UPS or server SMPS

56 500 V / 600 V / 620 V / 650 V N-Channel E Series High Voltage MOSFETs

Vishay Siliconix® offers a new series of 500 V, 600 V, 620 V and V(BR)DSS ID RDS(on) Qg PACKAGES 650 V N-Channel power MOSFETs with ultra-low maximum VGS = 10 V

on-resistance and a wide range of current ratings. Based on Vishay’s Product (V) (A) (Max) (Typ) next generation of superjunction technology, the E Series High (Ω) (nC) Voltage MOSFETs offer ultra-low gate charge and low gate charge TO-247 THIN-LEAD T0-220 FULLPAK“ TO-220 FULLPAK TO-220 (TO-263) D2PAK (TO-252) DPAK (TO-251) IPAK 8 X POWERPAK times on-resistance, a key figure of merit (FOM) for MOSFETs used x = GAFPBDUH in power conversion applications. E Series SiHx12N50E 11 0.38 25 x x x x SiHx15x50E 15 0.28 33 x x x Features 500 V ■ Ultra-low maximum on resistance from 39 m to 600 m at 10 V SiHx20x50E 19 0.184 46 x x x x SiHx25N50E 26 0.145 57 x x x ■ Low gate charge and gate charge times on-resistance FOM SiHx7N60E 7 0.6 20 x x x x ■ Wide range of current ratings from 7 A to 73 A SiHx11N60E 11 0.364 26 x ■ E Series superjunction technology SiHx12N60E 12 0.38 29 x x x x SiHx14N60E 16 0.225 41 x SiHx15N60E 15 0.28 39 x x x x Benefits SiHx18N60E 18 0.202 46 x x x ■ Saves energy in high-power, high-performance switch mode SiHx21N60E 20 0.176 55 x applications 600 V SiHx22N60E 21 0.18 57 x x x x x ■ Reduced specific on-resistance by 30 % compared to pre vious- SiHx22N60EL 21 0.197 37 x x x x SiHx23N60E 23 0.158 63 x x x generation devices for increased efficiency and power density SiHx26N60E 25 0.117 77 x ■ Lower input capacitance SiHx30N60E 29 0.125 85 x x x x ■ Increased switching speeds SiHx33N60E 33 0.099 100 x x x ■ Withstand high energy pulse in the avalanche & commutation SiHx47N60E 47 0.064 147 x mode SiHx73N60E 73 0.039 241 x SiHx6N65E 7 0.6 24 x x x x x SiHx12N65E 12 0.38 35 x x x Applications SiHx15N65E 15 0.28 48 x x x ■ Switch mode applications, including power factor correction SiHx22N65E 22 0.18 73 x x x x 650 V ■ Server and telecom power systems SiHx24N65E 24 0.145 81 x x x ■ Welding, plasma cutting, induction heating SiHx28N65E 28 0.122 93 x x SiHx47N65E 47 0.072 182 x ■ Battery chargers SiHx64N65E 64 0.047 239 x ■ High-intensity discharge lighting, fluorescent ballast lighting EF Series ■ Semiconductor capital equipment SiHx21N60EF 21 0.176 56 x x x x ■ Solar inverters SiHx28N60EF 28 0.123 80 x x x x ■ LED lighting 600 V SiHx33N60EF 33 0.098 103 x x x SiHx47N60EF 47 0.065 152 x SiHx70N60EF 70 0.038 253 x

57 HSON-8

Automotive Power Device Package Evolution Renesas Electronics supplies power MOSFET products for automotive electrical systems in a wide variety of packages to accommodate imple- mentations ranging from large-current applications such as electric power steering to medium-current applications such as engine control. To meet the diverse requirements of our customers, we develop high-performance power devices with power packages employing the latest assembly technology. Multi-wire bonding is used to provide large-current capabilities for applications such as electric power steering. For medium-current applications such as engine control, new packages such as the 8-pin HSON provide smaller size and reduced mounting area.

Dual Package

Development Polarity/ PT ID Ron(max) Ron(max) Part Number VDSS Part Number Process (TC=25°C) (DC) @VGS=10V @VGS=4.5V

VA0316QL06 NP30N04QUK 59W 30A 8mΩ - 40V VA0304QU04 NP29N04QUK 44W 30A 10.1mΩ -

VA0266QD06 NP30N06QDK 59W 30A 14mΩ 21mΩ Nch/ANL2 VA0304QD06 NP29N06QUK 44W 30A 21mΩ 60V VA0304QU06 NP29N06QDK 44W 30A 20mΩ 30mΩ

VA0316QL06 NP16N06QLK 25W 16A 39mΩ 60mΩ

Features Single Package HSON-8 ■ Optimal electrical performance due to flat lead package RDS (ON) VDSS ID (MOHM) MAX. 2 2 Part Number Nch/Pch Pch (W) ■ Reduced footprint: 31mm vs 64mm (TO-252) (V) max. (A) @10V ■ Enhanced thermal performance through exposed pad: OR 8V Rth down to 1K/W NP35N04YLG Nch 40 35 9.7 77 NP35N04YUG Nch 40 35 10 77 ■ Well formed solder fillet on PCB possible due to plated pin toe NP74N04YUG Nch 40 75 5.5 120 ■ AOI possible (X-Ray is not necessary) NP75N04YUG Nch 40 75 4.8 138 ■ Combi footpattern possible NP16N04YUG Nch 40 16 25 36 ■ Proven board level reliability NP50N04YUK Nch 40 50 4.8 97 NP75N04YUK Nch 40 75 3.3 138 NP35N055YUK* Nch 55 35 6.7 97 NP75N055YUK* Nch 55 75 4.5 138 NP23N06YDG Nch 60 23 27 60 NP33N06YDG Nch 60 33 14 97 NP33N075YDF Nch 75 33 28 92 NP40N10YDF Nch 100 40 25 120 NP20N10YDF Nch 100 20 55 61 NP20P06YLG Pch -60 -20 47 57 NP75P04YLG Pch -40 -75 9.7 138 NP50P03YDG Pch -30 -50 8.4 102 * UnderNP75P03YDG development Pch -30 -75 6.2 138

58 Triacs

Triacs Triacs are applied to control AC mains applications. They can be used as simple on/off switches, to replace electro mechanical relays while providing a higher degree of flexibility (through electronic control) and superior reliability. Using a simple phase-control circuit, they can also control power level through AC loads.

Fagor Littelfuse STMicroelectronics

IT (RMS)[A] SMD Axial SMD Axial SMD Axial

LxXx LxX8Wx 0.8 Z006xxxN Z006xxxA QxXx QxX8Ex

LxNx 1 FT01xxN FT01xxA Z01xxxN Z01xxxA QxNx

Z04xxxF BTA04-xxx FT04xxH Lxx04xx Lxx04xx T4xx-xxxB BTB04-xxx 4 FT04xxD FT04xxI Qxx04xx Qxx04xx T4xx-xxxH T4xx-xH FT04xxW T4xx-xT T4xx-xFP

FT06xxH Lxx06xx Lxx06xx 6 FT06xxJ Qxx06xx Qxx06xx FT06xxW

BTA08-xxx FT08xxH T8xx-xxxB BTB08-xxx FT08xxD FT08xxI Lxx08xx Lxx08xx 8 T8xx-xxxG T8xx-xT FT08xxG FT08xxJ Qxx08xx Qxx08xx T8xxx-xG T8xx-xI FT08xxW T8xx-xFP

BTA10-xxx FT10xxH BTB10-xxx 10 FT10xxJ Qxx10xx Qxx10xx T10xxx-xG T10xx-xT FT10xxW T10xx-xI

BTA12-xxx FT12xxH T12xxx-xG BTB12-xxx 12 FT12xxG FT12xxJ Qxx12xx Qxx12xx T12xx-xxxG T12xx-xT FT12xxW T12xx-xI

15 Qxx15xx Qxx15xx

BTA16-xxx FT16xxH T16xxx-xG BTB16-xxx 16 FT16xxG FT16xxJ Qxx16xx Qxx16xx T16xx-xxxG T16xx-xW FT16xxW T16xx-xT

BTA20-xxx 20 T20xx-xG T20xx-xT

BTA24-xxx FT25xxH BTA25-xxx BTA26-xxx 25 FT25xxG FT25xxJ Qxx25xxW Qxx25xx T25xx-xxxG BTB24-xxx FT25xxW BTB26-xxx

30 Qxx35xx Qxx35xx

FT40xxP BTA41-xxx 40 Qxx40xx BTA40-xxx FT40xxV BTB41-xxx

59 Teccor® Brand Thyristors High Current Capability, High Reliability for Heating Control

Thyristors Thyristors (TRIACs and SCR) give best balance in efficiency, simplicity, reliability and system costs in AC power applications such as heater and AC motor controls.

Schematic Symbol

Q6025PH5 / Q6035PH5 /Q6040PH5 MS0690J-DL1TE (90A, 600V) 25 / 35 / 40A RMS High Commutation Triac for Heating All new 90A RMS Back-to-Back Control in TO-218, TO-220 and the new FASTPAK. SCR for Robust Heating Control in SOT227B

TO-218X

FASTPACK TO-220 SOT227B

Application VDRM IT(RMS) Littelfuse Type Package Feature Coffee brewer, etc. 600V 16A Q6016LH4 TO-220 Iso. Robust TO-220 package; high surge capability; ceramic isolation 600V 25A Q6025LH5 TO-220 Iso. Tankless water heater, 600V 25A / 35A Q6035PH5 New FASTPAK FAST-ON terminal screw-on installation etc. 600V 40A Q6040J7 TO-218X Iso. Robust TO-218 package; unique eyelet leads Q6040PH5 New FASTPAK FAST-ON terminal; screw-on installation 600V (SCR) 65A S6065J TO-218X Iso. Wide lead for high IT conduction 600V 90A MS0690D-J New SOT227B Screw-on terminal; highest IT in 600V SOT227B

60 800V T-Series Triac Family 25A – 1200V Triac

T-Series Triacs offer on the same 25A – 1200V triac for robust and com- First automotive-grade 50A – 1200V SCR: device 800V capability with 125°C max pact motor starters or AC drives TN5050H-12WY Tj 600V capability with 150°C max Tj With a robust switching up to 240A peak is thyristor makes AC/DC converters With the 800V T-Series Triacs family, ST surge current and a 1200V high blocking safe by limiting the inrush current and is o ering a series which exhibits superior voltage, the T2550-12 triac is dedicated to providing insulation against AC line dynamic performances (noise immunity industrial applications such as three-phase overvoltages. Available in a TO-247, high and turn-o capability) and an extended motor so starter, contactor and protector. power package. e TN5050H-12WY temperature range up to 150°C. e T2550-12 triac allows a compact de- o ers superior performance in surge More over, the o -state voltage capability sign compared to a mechanical contactor current handling (ITSM = 200 A at 10 ms), has been raised up to 800V. and o ers higher performances with a thermal cooling capabilities is enables a downsizing high dV/dt superior to 2500V/μs and a (Rth(j-c) = 0.3 °C/W) and high surge of the Triac for a given load standard gate triggering current of 50mA. voltage withstanding capability or higher load rating e T2550-12 is available in D2PAK and (VDSM/VRSM = 1300 V). utilization. TO-220AB package. Features Features Features ■ High commutation: 200 A/μs ■ 800V, 6A - 16A snubberless Triacs ■ 25A medium power triac ■ High off-state immunity: 1000 V/μs ■ 150°C max Tj ■ High inductive turn off commutation ■ Gate trigger current: 50 mA ■ High static and dynamic commutation 20A/ms at 125°C junction ■ AEC-Q101 compliant - 2 times better vs. std. BTA/BTB family ■ 1200V symmetrical - 4 times better noise immunity vs. blocking voltage Benefits std. BTA/BTB family ■ 2.5kV/µs transient ■ Reduce BOM: extra power device no immunity at 125°C longer needed in the rectifier bridge Benefits ■ Same efficiency and cooling size as

■ Superior dynamic performance due to Hybrid motor starter diode bridge T2550-12 ST high temperature process L1 ■ High PCB creepage distance above

L2 ■ 10mA version can be directly MOTOR 4mm driven by microcontroller L3 ■ Control peak current at charger

T2550-12 power up Key-Applications Motor soft starter

T2550-12 ■ Inrush current limiting circuits L1 Key Applications

T2550-12 ■ Home appliances & small appliances L2 ■ Industrial battery chargers LOAD

T2550-12 ■ Fan & motor control L3 ■ Renewable energy inverters ■ Heater ■ Motor drive ■ Lighting ■ Industrial welding system

61 Schottky Diodes & Rectifiers

Any technology in the fields of high-voltage or small-signal needed for your application, Rutronik is able to provide it. No matter if it is Schottky, Standard-, Fast-, Superfast-, Ultrafast-Recovery or even Silicon Carbide Diodes we offer the solution for your need. Parts are available starting from 15V up to 4500V and give best performance caused by the technical characteristics.

Selection Guide

Voltage 10 20 30 40 50 60 70 80 90 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2500 3000 Voltage

Diodes Schotty / SBR Rectifiers Diodes SBR Automotive DIODESTAR Fast/Super-Fast/Ultra-Fast Recovery Rectif. Power Diodes Diotec Standard Recovery Rectifiers Diotec Fast Recovery Rectifiers Ultrafast Recovery Rectifiers Schottky Barrier Diode Fagor Fast Recovery Rectifiers Fagor General Purpose Rectifiers Schottky Rectifiers Ultrafast Recovery Rectifiers Infineon Ultra Soft Diode Infineon

Hyperfast Diodes SiC Diodes 2 & 3 Gen SiC Diodes 5 Gen Panjit Schottky Panjit Ultra Fast Recovery Diodes Super Fast Recovery Rectifiers FERD (Field Effect Rectifiers) Rohm Schottky Barrier Diodes Rohm Fast Recovery Diodes SiC Diodes 1 Gen SiC Diodes 2 Gen & HR Gen Shindengen Rectifier Diodes Shindengen Schottky Barrier Diodes Fast Recovery Diodes ST Field Effect Rectifiers ST Schottky Barrier Diodes Ultrafast Rectifiers SiC Diodes 1 Gen SiC Diodes 2 Gen SiC Schottky Toshiba Barrier Toshiba Diodes Vishay Schottky Rectifiers Vishay Ultrafast Recovery Rectifiers Fast Recovery Rectifiers Standard Recovery Rectifiers High Power Diodes

62 Schottky Diodes & Rectifiers

■ Optimized thermal behavior ■ Minimalized reverse leakage current ■ Low forward-drop voltage VF ■ Very fast reverse recovery times

Voltage 10 20 30 40 50 60 70 80 90 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2500 3000 Voltage

63 SiC Gen2 & FERD Diodes

Silicon Carbide Diodes Generation 2 – Drastic Reduction of Generated Losses Thanks to exceptional reverse recovery performances, the new Silicon Carbide (SiC) diodes of ST represent a key contributor to energy savings in SMPS applications and in emerging domains, such as solar energy conversion. The new SiC Diodes Gen2 of ST shows an increased breakdown capability (650V instead of standard 600V) and state-of-the-art surge current capability. These features, together with the excepti- onally low forward-drop voltage VF, make this family the new reference in the market. Design and diffusion are made 100% in-house by ST.

Features Applications Benefits ■ No or negligible reverse recovery ■ Photovoltaic inverter ■ Efficiency increased by up ■ Indispensable when power density ■ Reverse recovery unaffected by ■ High-end SMPS to 1% vs conventional increase is crucial dI/dt and forward current ■ High-frequency motor ultrafast silicon diodes ■ Allows the use of smaller passive ■ Switching behavior independent control drives ■ Less EMI in application components of temperature ■ Permits reduction in associ- ■ Reduction of generated losses* ated filter size and cost *approx. 70% compared to a solution with bipolar diodes

VRRM I0 VF (@IO) IR IFSM Part Number Package max [V] max [A] [A] max [mA] max ([A] STPSC4H065 DPAK, TO-220AC 650 4 1.75 0.04 38 STPSC6H065 D²PAK, TO-220AC, DPAK 650 6 1.75 0.06 60 STPSC8H065 D²PAK, DPAK, TO-220AC 650 8 1.75 0.08 75 STPSC10H065 D²PAK, DPAK, TO-220AC 650 10 1.75 0.1 90 STPSC8H065C TO-220AB 650 2 x 4 1.75 0.04 38 STPSC12H065C TO-220AB 650 2 x 6 1.75 0.06 60 STPSC16H065C TO-220AB 650 2 x 8 1.75 0.08 75 STPSC20H065C TO-220AB, TO-247 650 2 x 10 1.75 0.1 90 STPSC6TH13TI TO-220I 2 x 650 6 1.75 0.06 60 STPSC8TH13TI TO-220I 2 x 650 8 1.75 0.08 75 STPSC10TH13TI TO-220I 2 x 650 10 1.75 0.1 90 STPSC6H12 DPAK 1200 6 1.9 0.4 36

O FERD (Field-Effect Rectifier Diodes) Part Number Packages N VRRM I0 VF VF (@ Tj In the past, efficient power conversion rectification IF) Max (V) Max (A) Max (V) (A) Max (°C) solutions used Schottky diodes. The only way to achieve FERD30M45C TO-220AB, D²PAK 2 45 2 x 15 0.47 15 175 a breakthrough in efficiency and power density was to use expensive, FERD40M45C TO-220AB, D²PAK 2 45 2 x 20 0.50 20 175 complex synchronous rectification solutions, with MOSFETs and dedi- FERD40U45C TO-220AB, D²PAK 2 45 2 x 20 0.46 20 175 cated controllers. ST introduces a new generation of diodes, the FERD FERD60M45C TO-220AB 2 45 2 x 30 0.55 30 175 FERD60U45C TO-220AB 2 45 2 x 30 0.50 30 175 with a rectification performance in applications close to that of syn- FERD20U50DJF PowerFLAT™ 5 x 6 1 50 20 0.51 20 150 chronous solutions yet with the lower complexity of traditional rectifi- FERD20U60DJF PowerFLAT™ 5 x 6 1 60 20 0.51 20 150 cation techniques. Low Vf Low Leakage current ■ Improved efficiency ■ Increase the thermal runaway risk safety margin ■ Possibility to reduce the heatsink size ■ Easier to put several diodes in parallel and reduce the cost to work at same Tj

64 Super Barrier Rectifiers (SBR®)

The next Generation of Rectifiers for Automotive Diodes Incorporated has introduced a range of 21 of its Super Barrier Rectifiers (SBR®) qualified to the AEC-Q101 high-reliability automotive standard and backed by PPAP level 3 documentation. The parts are 100% avalanche tested and proven to deliver a reverse avalanche capability of up to 10 times greater than competing Schottky alternatives. Due to the SBR’s unique patented structure, its high reverse avalanche performance ensures greater guardbanding against negative spikes and inductive load surges, thereby raising the ruggedness and reliability of automotive products. In a typical single-pulse avalanche test, avalanche energy measurements for Schottky and SBR devices were respectively 7mJ and 70mJ for the same circuit conditions. Offering current ratings up to 60A and reverse voltage ratings up to 100V, the SBR ‘Q’ portfolio is also characterized by significantly lower reverse leakage current at higher temperatures, helping to minimize circuit losses and increasing protection against thermal runaway. The SBR forward voltage drop is also lower than that of the Schottky, meaning conduction losses are less and overall efficiency is improved in common reverse polarity protection and freewheeling diode circuits for example.

The Diodes’ Advantage ■ AEC-Q101 ■ Low Reverse Leakage Current (IR) Hi-reliability qualification in accordance with AEC-Q101 Reduced high temperature reverse leakage provides increased ■ PPAP Supported reliability against thermal runaway at high temperatures Production part approval procedure documentation provided ■ Low Forward Voltage (VF) ■ Avalanche rated The lower forward voltage drop of the SBR ensures power dissipation 100% Avalanche tested, ensures more rugged applications is minimized Reverse avalanche capability that is up to ten times greater than Circuit Functions a Schottky diode, ensuring more reliable end applications ■ Reverse polarity protection ■ Boost diode ■ Freewheel diode

Part Name Package VR (V) Io (A) VF max (V) IR max (mA) IR typ (mA) EAS (mJ) AEC-Q101 IR @ Io max @25°C VR = VR @25°C VR = VR @125°C SBR660CTLQ TO-252 60 6 0.57 0.3 5 190 Yes SBR6100CTLQ TO-252 100 6 0.74 0.1 6 120 Yes SBR1045D1Q* TO-252 45 10 0.5 0.3 50 200 Yes SBR10U45D1Q* TO-252 45 10 0.57 0.3 13 620 Yes SBR1045CTLQ TO-252 45 10 0.55 0.3 13 200 Yes SBR15U100CTLQ TO-252 100 15 0.8 0.1 1.5 192 Yes SBR20A60CTBQ TO-263 60 20 0.47 0.5 20 500 Yes SBR30A60CTBQ TO-263 60 30 0.63 0.33 40 600 Yes SBR30A45CTBQ TO-263 45 30 0.55 0.5 65 135 Yes SBR3045CTBQ TO-263 45 30 0.63 0.5 80 180 Yes SBR40U60CTBQ TO-263 60 40 0.6 0.4 15 1600 Yes SBR60A60CTBQ TO-263 60 60 0.62 0.2 15 1600 Yes SBR8U20SP5Q* PowerDI5 20 8 0.52 0.3 16 146 Yes SBR8U60P5Q* PowerDI5 60 8 0.53 0.33 20 800 Yes SBR10U45SP5Q* PowerDI5 45 10 0.47 0.3 30 530 Yes SBR15U30SP5Q* PowerDI5 30 15 0.49 0.3 10 1074 Yes SBR12U100P5Q* PowerDI5 100 12 0.55 0.25 11 592 Yes SBR12U120P5Q* PowerDi5 120 12 0.55 0.3 12 592 Yes

* All devices are dual common cathode except where * denotes single die. 65 SiC Schottky Barrier Diodes & further SiC Products Featuring the Industry‘s lowest VF

ROHM provides Eco Devices designed for lower power consumption & high efficiency operation. The second-generation of SiC Schottky barriers diodes features the industry‘s lowest forward voltage (VF=1.35V) – 10% less than conventional products – reducing power consumption considerably.

Benefits Applications ■ Ultra-small reverse ■ Minimized reverse ■ Power supply ■ Servers recovery time recovery charge (Qrr) ■ Photovoltaic ■ Air conditioners ■ Low conduction loss ■ Reduce switching loss ■ Power conditioners ■ On Board charger for EV/HEV ■ Reduced temp. dependence considerably and contribute to ■ Industrial equipment ■ High-speed switching possible end-product miniaturization

2nd Gen. SiC MOSFET SiC Diodes

BVDSS P/N Package RDSon ID max Absolute Maximum Electrical Characteristics Part No. Ratings (Ta=25°C) (Ta=25°C) Package 1200V SCT2080KEC TO247 80 mΩ 40A VR [V] IF [A] VF [V] Typ. IR [µA] Max. 1200V SCH2080KEC TO247 80 mΩ 40A SCS206AG** 650 6 1.35 120 TO-220AC 1200V SCT2160KEC TO247 160 mΩ 22A SCS208AG** 650 8 1.35 160 TO-220AC

1200V SCT2280KEC TO247 280 mΩ 14A SCS210AG** 650 10 1.35 200 TO-220AC SCS212AG** 650 12 1.35 240 TO-220AC 1200V SCT2450KEC TO247 450 mΩ 10A SCS215AG** 650 15 1.35 300 TO-220AC 650V SCT2120AFC TO220AB 120 mΩ 29A SCS220AG** 650 20 1.35 400 TO-220AC SCS206AM 650 6 1.35 120 TO-220FM Full SiC Power Module SCS208AM 650 8 1.35 160 TO-220FM BV I max P/N Topology DSS D SCS210AM 650 10 1.35 200 TO-220FM 1200V 120A BSM120D12P2C005 2 in 1 SCS212AM 650 12 1.35 240 TO-220FM 1200V 180A BSM180D12P2C101 2 in 1, MOS only SCS215AM 650 15 1.35 300 TO-220FM SCS220AM 650 20 1.35 400 TO-220FM 1200V 180A BSM180D12P3C007 2 in 1 SCS215AE 650 15 1.35 300 TO-247 1200V 300A BSM300D12P2E001 2 in 1 SCS220AE 650 20 1.35 400 TO-247 SCS220AE2** 650 10/20* 1.35 200 TO-247 SCS230AE2** 650 15/30* 1.35 300 TO-247 SCS240AE2** 650 20/40* 1.35 400 TO-247 SCS206AJ** 650 6 1.35 120 LPTL SCS208AJ** 650 8 1.35 160 LPTL SCS210AJ** 650 10 1.35 200 LPTL SCS212AJ** 650 12 1.35 240 LPTL SCS215AJ** 650 15 1.35 300 LPTL SCS220AJ** 650 20 1.35 400 LPTL SCS205KG** 1200 5 1.4 100 TO-220AC SCS210KG** 1200 10 1.4 200 TO-220AC SCS215KG** 1200 15 1.4 300 TO-220AC SCS220KG** 1200 20 1.4 400 TO-220AC SCS210KE2** 1200 5/10* 1.4 100 TO-247 SCS220KE2** 1200 10/20* 1.4 200 TO-247 SCS230KE2 1200 15/30* 1.4 300 TO-247 SCS240KE2 1200 20/40* 1.4 400 TO-247

* Per pin/per package **Also available with Automotive Grade (AEC-Q101). Adding HR at the end of the partnumber

66 Power Rectifiers in Low-Profile SMPD (TO-263AC) & SOT-227 Package

Ultrafast SOT-227 Ultrafast SOT-227 TMBS® Trench MOS Barrier Schottky rectifiers with devices that feature a Vishay released a new series of Ultrafast Diodes Modules in the wide range of current ratings and extremely low forward voltage drop for SOT-227 package with a wide range of current ratings and lower commercial applications. The devices are offered in the low-profile SMPD thermal resistance. Based on Vishay´s FRED Pt® and HEXFRED® package, which is footprint compatible with the D2PAK (TO-263). Ultrafast diodes, these modules provide ultrasoft recovery characteristics with higher thermal efficiency versus previous gene- Benefits Applications rations. ■ Low-profile SMPD package – ■ High-freq. DC/DC conv. Typical height of 1.7mm ■ Switching power supplies Benefits Applications ■ Current ratings from 10A to 60A ■ Freewheeling diodes ■ Easy to use and parallel ■ Output rectification on ■ Low forward voltage drop down ■ OR-ing diodes ■ Lower thermal resistance welding machines to 0.40V at 15A – Low power losses ■ Reverse battery compared to previous generation and high efficiency protection ■ Switch Mode Power ■ This flexible package allows ■ Max. operating junction temp.: 150°C Supplies (SMPS) several user-level configurations ■ DC/DC converters ■ Used with Vishay IGBT SOT-227 ■ Motor controls SMPD – Schottky Rectifier modules, it is possible to design IF VRRM Typ. VF @ IF TJ IFSM ■ Inverters Vishay P/N [A] [V] [V] [A] [oC] [A] a full converter using SOT-227 V10D100C-M3/I 2*5 100 0.60 5 150 100 modules only V10D120C-M3/I 2*5 120 0.64 5 150 100 ■ FRED Pt® and HEXFRED® provide V10D45C-M3/I 2*5 45 0.41 5 150 100 ultrasoft recovery current shape V10D60C-M3/I 2*5 60 0.50 5 150 100 V20DM120C-M3/I 2*5 120 0.65 5 175 120 V10D202C-M3 2*5 200 0,67 5 175 100 V20D202C-M3 2*10 200 0,68 10 175 150 V30D45C-M3/I 2*15 45 0.40 15 150 200 V30D60CL-M3/I 2*15 60 0.49 15 150 200 Device Vrrm [V] IF(AV) at TC Typ trr at 25°C V30D60C-M3/I 2*15 60 0.57 15 150 170 [A] [°C] [ns] V30DL50C-M3/I 2*15 50 0.42 15 150 300 VS-UFB80FA20 200 80 129 34 V30DM120C-M3/I 2*15 120 0.67 15 175 150 VS-UFB80FA40 400 80 121 68 V30D202C-M3 2*15 200 0,66 15 175 260 VS-UFB80FA60 600 80 104 79 V40D100C-M3/I 2*20 100 0.63 20 150 250 VS-UFL80FA60 600 80 115 115 V40D120C-M3/I 2*20 120 0.64 20 150 250 VS-UFB130FA20 200 130 126 42 V40DM120C-M3/I 2*20 120 0.64 20 175 250 VS-UFB130FA40 400 130 114 86 V60D100C-M3/I 2*30 100 0.66 30 150 320 VS-UFB130FA60 600 130 92 79 V60D120C-M3/I 2*30 120 0.70 30 150 320 VS-UFL130FA60 600 130 98 105 V60D45C-M3/I 2*30 45 0.48 30 150 320 VS-UFB201FA40 400 200 86 80 VS-UFB280FA20 200 280 100 34 VS-UFB280FA40 400 280 90 93 SMPD – Ultrafast Rectifier VS-UFB230FA60 600 230 88 83

Vishay P/N IF VRRM Typ. VF @ IF TJ Typ. trr VS-UFL230FA60 600 230 102 104 [A] [V] [V] [A] [oC] [A] VS-UFB250FA60 600 250 113 166 VS-16CDH02M3 2*8 200 0.77 8 175 23 VS-UFB310CB40* 400 310 119 89 VS-16EDH02M3 16 200 0.75 16 175 26 VS-UFL250CB60* 600 250 133 166 VS-20CDH02M3 2*10 200 0.77 10 175 22 VS-HFA70FA120 1200 70 94 134 VS-10CDH06M3 2*5 600 0.90 5 175 45 VS-HFA70EA120 1200 70 121 145 VS-12CDU06M3 2*6 600 0.86 6 175 65 VS-HFA90FA120 1200 90 63 80 VS-16EDU06M3 16 600 0.91 16 175 100 VS-HFA140FA60 600 140 110 90 VS-16CDU06M3 2*8 600 0.94 8 175 70 VS-HFA140FA120 1200 140 74 145 VS-30CDU06M3 2*15 600 0.90 15 175 95 VS-HFA220FA120 1200 220 68 157

67 Modules

Modules Rutronik offers a wide range of power module topologies, standard solder-pin connectors, press-fit technology, spring connections, innovative thermal interface material (TIM), and a broad power spectrum range. The offering encompasses Intelligent Power Modules (IPM), Power Integrated Modules (PIM, a combination of input rectifiers, inverter and brake chopper), sixpack inverters, and rectifier, PFC-, H-bridge, half-bridge, booster, as well as NPC, MNPC and AMNPC converter modules. Our experts work closely with yours to deliver solutions that fit your needs.

Applications ■ Induction heating ■ Airconditioning ■ Microwave ■ Washing machine ■ Multifunction printers ■ Power supply ■ Solar inverter ■ Power tools ■ Motor control ■ Welding ■ UPS ■ Pumps

BYD Infineon International Littelfuse ROHM STMicroelectronics Vincotech Vishay Rectifier

Full Bridge

Half Bridge

IGBT

MOSFET

Rectifier

6-PAK

IPM

PFC

SiC

68 Modules

BYD Microelectronics

BYD Microelectronics, a subsidiary of BYD Company Ltd., is dedicated to development of integrated circuits and power devices. Furthermore, BYD focuses on developing world first class power modules and provides the highest quality and efficient customized services to our customers. There are generally two types of power modules: automobile and industrial, all series of the module have been certified by strict reliability and performance tests.

IGBT Power Modules in 34 / 62 mm Packages Intelligent Power Modules (IPM) BGxxxBxxx Series BIPxxx Series

Features & Benefits The products provide very compact and high performance as AC ■ Relatively lower saturation voltage drop, switch loss and stray motor drivers mainly targeting low-power inverter-driven appli- resistance cations like air conditioner, washing machine, frequency converter, ■ Lower heat resistance, excellent heat dissipation sewing machine, etc. It combines optimized circuit protection and ■ Relatively wider working area, high reliability drive matched to low-loss Mosfet or IGBT. ■ Anti-vibration design ■ Globally applicable package ■ Build-in IGBT,FRD, LVIC,HVIC ■ Compact structure, simplify ■ Single power supply system design, system reliabi- Applications ■ Have under-voltage lock-out pro- lity and stability ■ Welding tection, over-current protection , ■ Built-in high-voltage integra- ■ AC motor control inverters fault output fuction ted circuit (HVIC), achieved ■ Servomotor ■ Division of three phase DC nega- without optocoupler isolation ■ UPS tive side, can independently test ■ Low price, highly competitive the line current market

Part Number Package Current [A] Voltage [V] Part Number Package Current [A] Voltage [V] BG75B06LX2R-I 75 600 BIP60002H BIP26-2912 2 600 BIP60010G 10 600 BG100B06LX2R-I 100 600 BIP25-3824 BIP60015G 15 600 BG50B12LX2R-I 34mm 50 1200 BIP60010 10 600 BG75B12LX2R-I 75 1200 BIP60015 15 600 BG100B12LX2R-I 100 1200 BIP27-4426 BIP60020 20 600 BG100B12LY2R-I 100 1200 BIP60030 30 600 BG150B12LY2R-I 150 1200 BIP120035 35 1200 BIP30-7931 BG200B12LY2R-I 62mm 200 1200 BIP120050 50 1200 BG300B12LY2R-I 300 1200 BG400B12LY2R-I 400 1200 BIP25 BIP27

BIP30 BIP26

69 EconoDUAL™ 3 650V/1200V/1700V 600A - best in class

Infineon is the first supplier of a 600A current rated module for all voltage classes in the EconoDUAL™3 package. With excellent mechanical robustness, power cycling capability as well as the option of PressFIT pins, Infineon offers a reliable, cost-effective solution for applications like wind turbines, drives, hybrid vehicles etc.

The FF600R17ME4_B11 is the flagship product of Infineon’s well Features Benefits: established EconoDUAL™ 3 series. It is developed with a clear focus ■ Highest power density for ■ New advanced assembly tech- on maximum possible power density within a given footprint. compact inverter designs nologies With the use of copper bonding technology as well as an improved ■ Trench/Fieldstop IGBT4 ■ Superb thermal performance to DCB the output power can be increased by more than 30% when ■ Compact modules with only enable full power utilization compared to the 450A version. 17mm height ■ Plug and play upgrade of ■ PressFIT contact technology existing inverter designs The FF600R12ME4A_B11 is a new member of Infineon’s Econo- ■ Emitter controlled diode ■ PressFIT and solder pin DUAL™3 family. With its automotive qualification it addresses ■ Integrated NTC temperature versions demanding applications in commercial and agricultural vehicles such sensor ■ Best in class current rating: as hybrid and full electric busses as well as construction vehicles. ■ T(vj op) = 150°C 650V/1200V/1700V 600A with

IC [A] 650V 1200V 1700V ■ V(CEsat) with positive tempe- Infineon’s IGBT4

600 FF600R07ME4_B11 FF600R12ME4_B11 FF600R17ME4_B11 rature coefficient ■ Isolated base plate FF600R12ME4P_B11 FF600R17ME4P_B11 ■ Parallel operation enabled by FF600R12ME4C_B11 symmetrical design

FF600R12ME4CP_B11 ■ Standard housing

FF600R12ME4A_B11 NEW …P Thermal Interface Material | _B11 PressFIT Modules | …A Automotive qualified | …C Soft Diode Performance

TIM (Thermal Interface Material) A thermal interface material, especially developed for and pre-applied to Infineon’s power modules outperforms the general purpose materials available. TIM not only provides the lowest thermal resistance, it also fulfills the highest quality standards given for power modules to achieve the longest lifetime and highest system reliability.

Main Features: Benefits: ■ Best in class thermal resistance ■ Reduced process time in manufacturing ■ Pre-applied to Infineon modules ■ Simplified mounting ■ Dry to the touch ■ Increased system reliability ■ Optimized for dedicated ■ Increased system lifetime Infineon modules ■ Optimized thermal management ■ Improved handling in case of maintenance

70 EconoPACK™4 IGBT Modules

The EconoPACK™ 4 package perfectly fits into the well-known Econo portfolio. EconoPACK™ 4 features screw power terminal, providing excellent electric connection. DC and AC link are separated and distinguishable at one glance for ease of use. Control pins feature Main Features Infineon‘s PressFIT technology for solderless assembly. A new and ■ Robustness: rugged mechanical design with ultrasonic welded highly reliable ultrasonic welding process is used for all connections and injection moulded terminals between the terminals and the DCBs within the module. ■ Easy and most reliable assembly: PressFit control pins and Optimized gate driver connection is possible by placing the driver screw power terminals for completely solderless connections on top of the module. Low parasitic stray inductance and optimized ■ Efficiency: leading IGBT technologies with increased thermal resistance to heat sink contribute to excellent inverter solu- Tvjop = 150°C, optimized module layout for high power densities tions. The EconoPACK™ 4 portfolio is available in current ratings ■ Integration: compact rectifier, sixpack and three level one phase from 100 A up to 400 A. Sixpack and half-controlled input rectifier configurations with NTC configurations (available in 1600 V with current ratings of 240 A and 360 A) are tailor-made for industrial applications. Furthermo- 3-Level

re, three level one phase solutions are available with the 650V, 1200V IC [A] 650V 1200V and 1700V IGBT Technology and current ratings of 200 A to 400 A, NPC-1 NPC-2 offering higher efficiencies, lower switching losses as well as savings 200 F3L200R07PE4 in system costs, e.g. due to lower filter requirements. 300 F3L300R07PE4 F3L300R12PT4_B26 400 F3L400R12PT4_B26

2-Level

2-Level 650V 1200V 1700V

ED- IC [A] sixpack sixpack sixpack 1EDI EiceDRIVER™ Compact A thermal interface material, especially developed for and pre-applied to 100 FS100R07PE4 FS100R12PT4 FS100R17PE4 EiceDRIVER™Infineon’s power solutions modules from outperforms Infineon are the the general expert’s purpose choice. materials availa- 150 FS150R07PE4 FS150R12PT4 FS150R17PE4 Withble. its TIM HV not Gate only Driver provides Boards the andlowest HV thermal Gate Driver resistance, ICs it also fulfills the 200 FS200R07PE4 FS200R12PT4 Infineonhighest provides quality standards a broad spectrum given for of power solutions modules for reliable to achieve and the longest life- efficienttime and controls highest for system IGBT reliability.and MOSFET products. Others

IC [A] 650V 1200V 1600V 3x chopper 3x chopper half-controlled input rectifier Main Features: 200 FD200R12PT4_B6 ■ Single channel isolated driver DF200R12PT4_B6 ■ Input to output isolation voltage up to 1200V 240 TDB6HK240N16P ■ For high voltage power MOSFETs and IGBTs 300 FD300R07PE4_B6 ■ Up to 6A minimum peak rail-to-rail output DF300R07PE4_B6 ■ Separate source and sink outputs or active Miller Clamp 360 TDB6HK240N16P 400 FD400R07PE4R_B6 DF400R07PE4R_B6

71 Small, Low-Losses, Intelligent Molded Modules SLLIMM™ Series

ST extends its power products portfolio introducing the IPM (intelligent power module) family. This 3-phase inverter, called SLLIMMTM (Small, Low Losses, Intelligent, Molded Modules) provides a compact, high-performance AC motor drive in a simple, rugged design. The ST SLLIMMTM modules, composed of six 600V IGBTs with freewheeling diodes and three half bridge HVICs (ST proprietary control ICs) gate drivers, covers a large gamma of current capability from 3A, with the smaller SLLIMMTM-nano (26 NDIP full molded package), to 30A with the bigger SLLIMMTM products (25 and 38 Small and Large DIP DBC, direct bond copper, packages). The ST SLLIMMTM compact inverter provides low electromagnetic interference (EMI) characteristics with optimized switching speed. The ST IPM family products assure several options, from low-cost to fully-equipped versions, and as most recent opportunity a one-phase Single Leg module has been developed too.

Benefits Target Applications ■ High Reliability ■ Low-power motor drives ■ Sewing machines pumps ■ Advanced protection functions ■ Reduced total system cost ■ Washing machine, dish washers ■ Power tools fans ■ Reduced EMI and noise ■ Easy layout ■ Compressor drives refrigerators ■ Rehabilitation and fitness applications

Part Number STGIPN- STGIPN- STGIPS- STGIPS- STGIPS- STGIPS- STGIPL- STGIPS- STGIPS- STGIPL- STGIP- 3H60A 3H60* 10K60A 10K60T* 14K60T* 14K60 14K60 20K60 20C60* 20K60 S30C60* Pin Count 26 26 25 25 25 25 38 25 25 38 25 Pkg Size [mm] 29.5x 29.5x 44.4x 44.4x 44.4x 44.4x 49.6x 44.4x 44.4x 49.6x 44.4x 12.5x3.1 12.5x3.1 22.0x5.4 22.0x5.4 22.0x5.4 22.0x5.4 24.5x5.4 22.0x5.4 22.0x5.4 24.5x5.4 22.0x5.4 DBC substrate no no yes yes yes yes yes yes yes yes yes Voltage [V] 600 600 600 600 600 600 600 600 600 600 600 Current @ Tc=25°C [A] 3 3 10 10 14 14 15 18 20 20 30 Rth (max) [ºC/W] 50 50 3.8 3.8 3 3 2.8 2.4 2.7 2.2 2.4 NTC no no yes yes yes no yes no no yes no Integr. Bootstrap diode yes yes yes yes yes yes yes yes yes yes yes Smart shutdown function no yes no no no yes yes yes yes yes yes SD function no yes no yes yes yes yes yes yes yes yes Op-amps for advanced no yes no no no no yes no no yes no current sensing Comparator for fault no yes no no no yes (1pin) yes (3pin) yes (1pin) yes (1pin) yes (3pin) yes (1pin) protection *Available with STD input driving too (STGIPN3H60-H; STGIPS10K60T-H; STGIPS14K60T-H; STGIPS20C60-H; STGIPS30C60-H)

˜ Bridge rectiﬁer ˜

Gate driver Half bridge

Microcontroller Gate driver Half bridge M

Gate driver Half bridge

NTC temperature monitoring Intelligent power module

Feedback

72 Flexible Module Solutions for Motion Control Power Modules

Vincotech is an established, reliable partner in designing and building semiconductor power modules for motion control, renewable energy and power supply applications, setting performance standards for both off-the-shelf and application-specific solutions. An independently operating affiliate of Mitsubishi Electric Corporation staffed with around 500 people worldwide, Vincotech delivers fast, flexible and customer- focused solutions, service and support to empower customers‘ ideas. A major part of the power module portfolio is designed for standard motor drive applications featuring state-of-the-art chip technologies. Vincotech offers ■ Power semiconductor modules based on components from The flow module family is suited for a power range of below 1 kW leading manufacturers (IGBT, MOSFET, thyristors and diodes, and up to 50 kW. The name Vincotech stands for highest product SiC MOSFET) as well as passive components (shunts, capacitors, reliability and excellent customer service resulting in outstanding NTC, PTC) customer satisfaction. ■ Various topologies (e.g. Rectifier, Sixpack, PIM (CIB), PIM with PFC, IPM) all with low stray inductance ■ 22 different housings in various contact options (solder, Press-fit, screw and spring terminals), flexible heat sink orientation (horizontal and vertical), with pre-applied thermal interface material, e. g. highly conductive phase change material. ■ Standard Al2O3 and advanced AlN substrate for improved thermal connectivity ■ Convex, pre-bent DCB to minimize thermal grease thickness ■ Simulation tools that interactively calculate modules’ electrical and thermal behavior based on fully measured parameters

Available Topologies Package Voltage [V] Current [A]

Rectifier, sixpack, PIM with PFC flow 0B 600...1600 4...35 Rectifier, sixpack, 7pack, PIM (CIB), flow 0 600...1600 4...200 PIM with PFC, half-bridge, H-bridge

Sixpack flow 90 0 1200 8...35

Sixpack, 7pack, PIM (CIB), H-bridge flow 1 600...1200 15...100

IPM flow 1B 600...1200 4...10

Rectifier, sixpack, 7pack, PIM (CIB) flow 2 600...1600 35...150

Rectifier, sixpack, PIM (CIB), PIM with PFC flow 90 1 600...1600 6...75

Sixpack, PIM (CIB) MiniSKiiP® 600...1200 6...150

"MiniSKiiP®“ is a trade mark of SEMIKRON Elektronik GmbH & Co KG

73 RF / HF TRANSISTORS

RF / HF Transistors

In the fast growing market for wireless applications Rutronik offers a wide range of cost-effective, and high-end RF / HF transistors. Our comprehensive portfolio includes Low Noise Amplifiers (LNAs), Biased Low Noise Amplifiers, High Linearity Transistors, MMICs, RF MOSFET as well as LD MOS. Find the most suitable device in our product catalogue and ask for samples respective design support via our e-commerce platform: www.rutronik24.com

Type Diodes Infineon Intersil STMicroelectronics Applications

RF Transistors BFSxxx BFP1xx, BFP4xx General purpose ZUMTSxxx BFP5xx, BFP6xx BFP7xx

MMICs ICs BGA4xx, BGB7xx Broadband and driver amplifier

Low Noise Amplifier BGA4xx, BGA6xx GPS, WLAN, UMTS, Mobile TV

LDMOS PTFAxxx PD200xxx, PD54xx, Portable/mobile radios, wireless data modems, wireless alarm systems, PD55xx, PD84xx, HF/VHF marine radio, RFID and meter readers, power amplifier applications PD85xx, STAP85xx

Ultra High Frequency HFA3xxx VHF/UHF amplifiers, VHF/UHF mixers, IF converters, synchronous detectors Transistor Arrays

74 DESIGN YOUR SMART PRODUCTS

THE FOUR CORE SEGMENTS OF RUTRONIK SMART RUTRONIK SMART will provide specific support to manufacturers of devices with focus on smaller and often portable devices in four different market areas.

LIFE STYLE HEALTHCARE COMFORT SAFETY

■ Wearables ■ Patient monitoring ■ Home automation ■ Track & trace ■ Sports & games ■ Hearing aids ■ Home appliances ■ Surveillance ■ Accessories ■ Weight scale ■ Lighting control ■ Alarm systems ■ Beacons ■ Pulse oximeter ■ HVAC control ■ Smoke detectors ■ Indoor navigation ■ Blood glucose ■ Door locks ■ Crash detection ■ Wellness monitor ■ Metering ■ Emergency stop

OUR RANGE OF CORE PRODUCTS The perfect symbiosis for environmental sensing, data processing, wireless internet connectivity and high efficient power supply.

WIRELESS COMPONENTS MICROCONTROLLERS

SENSORS POWER MANAGEMENT

OUR PARTNER AND CORE LINES Worldwide leaders in SMART technologies and innovation

www.rutronik.com/SMART

Berlin Frankfurt Hannover Nürnberg Justus-von-Liebig-Straße 7 Frankfurter Straße 151 c Rendsburger Straße 32 Südwestpark 10/12 12489 Berlin 63303 Dreieich 30659 Hannover 90449 Nürnberg Tel. +49 30 8 09 27 16-0 Tel. +49 6103 2 70 03-0 Tel. +49 511 228507-0 Tel. +49 911 6 88 68-0 RUSOL GmbH & Co. KG Dresden Freiburg Mannheim Ostwestfalen Industriestraße 2 Radeburger Straße 172 Basler Landstraße 8 Amselstraße 33 Brockweg 133 75228 Ispringen 01109 Dresden 79111 Freiburg 68307 Mannheim 33332 Gütersloh Tel. +49 (0) 7231 801-2910 Tel. +49 351 20 53 30-0 Tel. +49 761 61 16 77-0 Tel. +49 621 76 21 26-0 Tel. +49 5241 2 32 71-0 [email protected] www.rusol.com Erfurt Hamburg München Ratingen Flughafenstraße 4 Neue Gröningerstraße 10 Landsberger Straße 392 Gothaer Straße 2 99092 Erfurt 20457 Hamburg 81241 München 40880 Ratingen Tel. +49 361 2 28 36-30 Tel. +49 40 3 59 60 06-20 Tel. +49 89 88 99 91-0 Tel. +49 2102 99 00-0

European branches: International branches:

Austria France Netherlands Slovakia USA Rutronik Elektronische Rutronik S.A.S Rutronik Elektronische Rutronik Elektronische Rutronik Inc. Bauelemente GmbH Bauelemente GmbH, o.z. Bauelemente Ges. m. b. H. 6, Mail de l’Europe 3 Summit Park Drive, Suite 535 Papland 4a Lazovná 11 Durisolstraße 11 78170 La Celle St Cloud Cleveland, Ohio 44131 4206 CL Gorinchem 97401 Banská Bystrica 4600 Wels Tel. +33 1 30 08 33 00 Tel.: +1 216 328 8900 Tel. +31 183 64 60-50 Tel. +43 7242 4 49 01 [email protected] Tel. +421 48 4 72 23-00 Bordeaux Mexico Norway Slovenia Belgium Tel. +33 5 57 26 40 00 Rutronik Mexico S.A. DE C.V. Rutronik Elektronische Rutronik Elektronische Rutronik Belgium BVBA Grenoble Bauelemente GmbH Bauelemente GmbH Av. Armando Birlaing Shaffler Keppekouter 1 Tel. +33 4 76 61 00 90 Olav Helsets vei 6 Motnica 5, 1236 Trzin No. 2001 Piso 8 A-II Ninovesteenweg 198 Le Mans 0694 Oslo Tel. +386 1 5 61 09 80 Corp. Central Park Torre 1, Centro Sur 9320 Erembodegem-Aalst Tel. +33 2 43 78 16 97 Tel. +47 22 76 79 20 76090 QUERETARO, Qro. Tel. +32 53 60 65 90 Tel. +52 442 103 1800 Lyon Spain

Tel. +33 4 72 76 80 00 Poland Rutronik España S.L. notice. without change to subject | Specifications | KNA P11 ENG Rutronik Polska Sp. z o.o. China Bulgaria Poitiers Barcelona ul. Bojkowska 37 Rutronik Electronics (Shenzhen) Rutronik Elektronische Tel. +33 5 49 52 88 88 C/ Marqués de Sentmenat 54 - 58, 44-101 Gliwice Co., Ltd Bauelemente GmbH 3a Planta - 1o, 08029 Barcelona Rennes Tel. +48 32 4 61 20 00 Blvd. Nikola Vaptzarov 35 Tel. +34 93 4 44 24 12 Shenzhen Tel. +33 2 23 45 14 40 Room 807, Excellence Bldg., Business Center Lozenec Gdynia Madrid o Strasbourg No. 98, Fuhua 1 Road Floor 1, Office N 1B ul. Batorego 28-32 Ctra. Canillas 134 - 1a Planta - 9B Tel. +33 3 88 78 12 12 81-366 Gdynia Futian Distr., Shenzhen 1407 Sofia 28043 Madrid Tel. +86 755 8240 7106 Tel. +35 92 974 86 46 Tel. +48 58 7 83 20-20 Tel. +34 91 3 00 55 28 Hungary Warsaw San Sebastián Shanghai Rutronik Magyarország Kft. ul. Broniewskiego 3 o o Czech Republic P Ubarburu, 71 - 1 E Room 1710, Dongchen Tower Alíz utca 1 01-785 Warszawa Rutronik Elektronische 20115 Astigarraga/Guipuzcoa No. 60, Mudan Road 1117 Budapest Tel. +48 22 462 70-50 Bauelemente CZ s.r.o. Tel. +34 943 40 45 28 Pudong New Distr., Shanghai Tel. +36 1 371 06 66 Tel. +86 216 8869 910 Brno Portugal Sweden Slavičkova 1a Rutronik Elektronische Italy Rutronik Nordic AB Chengdu 63800 Brno Bauelemente GmbH Rutronik Italia S.r.l. Kista Science Tower Room no. 407, 4F Tel. +420 5 4 54 24-681 Av. General Humberto Delgado Färögatan 33 No. 31 Zong Fu Street 21, Via Caldera Porta 8, 1ºAndar, Sala R Prague 16451 Kista 610016 Chengdu Centro Direzionale S.Siro 4760-012 V. N. Famalicão Na Pankraci 1638/43 Tel. +46 8 50 55 49 00 Tel. +86 28 8651 2214 20153 Milano (MI) Tel. +351 252 3 12-336 140 00 Praha 4

Tel. +39 02 4 09 51-1 sales our team. please contact information, more For in several lines countries. franchised product some for be limitations could some there Please note, Tel. +420 2 33 34 31 20 [email protected] Switzerland Hong Kong Romania Rutronik Elektronische Rutronik Electronics Asia HK Ltd. Rutronik Elektronische Ancona Bauelemente AG Denmark Tel. +39 071 2 91 62 18 Bauelemente GmbH Hong Kong Rutronik Elektronische Martin Luther Str. no. 2, 3rd floor Volketswil 54/F, Hopewell Centre Bauelemente GmbH Bologna 300054 Timişoara Brunnenstrasse 1 183 Queens Road East, Wan Chai Herstedøstervej 27-29 Tel. +39 051 6 46 32 00 Tel. +40 25 64 01 240 8604 Volketswil Hong Kong Tel. +41 44 9 47 37 37 Tel. +852 5337 0119 2620 Albertslund Florence Bucureşti Tel. +45 7020 19 63 Tel. +39 055 8 82 73 32 Tel. +40 314 25 38 39 Yverdon-les-Bains Rue Galilée 15, Taiwan Padua 1400 Yverdon-les-Bains Rutronik Electronics Asia HK Ltd. Estonia Tel. +39 049 8 69 78 00 Russia Tel. +41 24 4 23 91 40 Taipei (Taiwan representative office) Rutronik Elektronische Rutronik Rome 8F, No. 367, Fuxing N. Rd., Bauelemente GmbH Beteiligungsgesellschaft mbH Tel. +39 06 228 782-1 Levoberejnaya sreet 12 Turkey Songshan Dist, Taipei City, Vaksali 17A 10543 Taiwan 50410 Tartu Turin Hotel Soyuz, office 314 in foundation Tel. +49 7231 801-1751 Tel. +886 (2) 2175 2936 Tel. +372 7370951 Tel. +39 011 9 02 20 00 125445 Moscow Tel. +7(499) 963 31 84 [email protected] Thailand Lithuania Rutronik Elektronische Finland Serbia United Kingdom & Ireland Bauelemente GmbH Rutronik Elektronische Rutronik Elektronische Rutronik Elektronische Rutronik UK Ltd. Bauelemente GmbH Bauelemente GmbH Bauelemente GmbH 1-3 The Courtyard, Calvin Street 2/1 Soi Rom Klao 25/2 Malminkaari 5 Raudondvario pl.76 YUBC Bul. Mihajla The Valley, Bolton Rom Klao Road, Khlongsamprawet 00700 Helsinki 47182 Kaunas Pupina 10z/IV, 11070 Beograd BL1 8PB, Lancashire, UK Ladkrabang, 10520 Bangkok Tel. +358 9 32 91 22 00 Tel. +370 37 26 17 80 Tel. +381 11 311 33 66-3 Tel. +44 1204 363311 Tel. +66 2 737 6423