8.20 V2

1 1 6 6 1 1 2 2 1 1 0 0 0 0 0 0 0 0 100 100 100 100 100 GLOW% GLOW%

ceptional weld bond strength, 0 0 0 0 0 ILLUMINANCE ILLUMINANCE 99 99 94 94 99 99 98 98 99 99 100 100 100 100 100 100 100 100

BLACKOUT% BLACKOUT% ) ±10%) 2 ™

(415 g/m 2 0.38 0.42 0.45 0.43 0.44 0.22 0.25 0.31 0.25 0.27 0.24 0.31 0.24 0.44 0.25 0.51 0.25 0.55 0.25 0.57 0.25 0.15 0.25 SHGC SHGC commercial commercial ASTM E84 (Class B) Bulletin #117 California Technical ASTM E2180 Gold GREENGUARD RoHS - Lead Free, NRC 0.05, SAA 0.03 Interior 10 Year 0.018 in (0.46 mm) ±10% 0.018 in (0.46 mm) 063328 Privacy 0% - Blackout / 62.5% Acrylic 37.5% Polyester 100% Approximately (27 lm) Rolls of 30 ly in (300 cm) 118 12.24 oz/yd Avila Twilight Avila FABRIC+GLASS FABRIC+GLASS Heat Impulse, High Frequency. For ex Heat Impulse, High Frequency. 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 35 39 31 36 31 www.mermetusa.com. Tv | % Tv | % Welding: Welding: optical optical

| 8 4 65 54 45 50 46 79 74 61 74 69 76 62 76 37 74 19 76 74 74 91 74 Rv | % Rv | % 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 36 40 34 37 33 Ts | % Ts | % Ts FABRIC FABRIC ) ±10%) 2 ™ 5 9 22 15 22 25 32 41 32 35 31 43 31 67 33 82 32 93 32 96 32 16 31 thermal As | % As | % (210 g/m Total Solar Total 2 thermal Cold, Ultrasonic Recommended Total Solar Total met recommends our stocked adhesive film met recommends (item #103218). 7 4 59 51 44 48 45 75 68 59 68 65 69 57 69 33 67 18 68 68 68 84 69 er 2020, Mermet Corporation, All right reserved, US and Foreign patents pending. US and Foreign 2020, Mermet Corporation, All right reserved, Rs | % Rs | % *Roomside: identified by the fabric side; Streetside: identified by the coated side. *Roomside: identified by the fabric side; Streetside: 5 Year Interior 5 Year Avila Daylight Avila D63328 ASTM E84 (Class A) Bulletin #117 California Technical ASTM G21 ASTM E2180, Gold GREENGUARD RoHS - Lead Free, NRC 0.05, SAA 0.03 Privacy <1% 100% Polyester 99% Approximately (27 lm) Rolls of 30 ly in (300 cm) 118 6.20 oz/yd ±10% 0.012 in (0.31 mm) M meet your individual fabric specifications. testing all cutting and welding methods prior to use to confirm they recommend We Remove dust with vacuum cleaner or compressed air. Do not scrub. Do not use solvents or any abrasive substance which which Do not scrub. Do not use solvents or any abrasive substance air. Remove dust with vacuum cleaner or compressed and in addition with DURAGUARD® Fabric Protector is treated side of Avila might damage the coating of the fabric. The front can be spot cleaned by gently blotting with a sponge or Avila with SANITIZED®. Therefore, to DURAGUARD®, also treated get wet. A soft brush dipped in lukewarm soapy water using a mild detergent. The foam coating on the back side should not small stains. dry chemical sponge or clean white pencil eraser can be used to remove Reflectance (Rs), Solar Solar (Ts), with ASTM E891 & ASTM E903-96: Solar Transmittance conducted in accordance The fabric performance tests were conducted were (SHGC) Gain Coefficient Solar Heat for tests Glass performance (Tv). Transmission (As), VisibleAbsorptance (Rv), and Reflectance Visible a on based is applications commercial for WindowLaboratory National Berkeley improvement % SHGC Lawrence the using software. certified NFRC 7.3 obtained using the center glass makeup of Double Glazing 6 mm / ½" air / 6 mm with low E on surface #2. Results for SHGC were commercial standard Average. SAA is Sound Absorption with ASTM C423-09a: NRC is Noise Reduction Coefficient, of glass. Acoustical performance was tested in accordance performance specifications with 100,000 incident lux. For up-to-date test results, Blackout % is based on calculated luminosity using a 30s camera exposure Department at: and larger samples, contact the Mermet Technical © Cutting:

SIDE* Roomside Streetside Roomside Streetside Roomside Streetside Roomside Streetside Roomside Streetside Roomside Streetside Roomside Streetside Roomside Streetside Roomside Streetside

™ ™

Cowpens, SC 29330 [email protected] n n Linen Chalk Frost Ash Pewter Graphite Black White White Canvas Canvas Linen Chalk Frost COLOR COLOR

Care & Handling Care Mermet Corporation 5970 N. Main Street Ph 1.866.902.9647 mermetusa.com Specifications Item Number Category Product Openness Factor Composition UV Blockage Packaging Standard Width Weight Thickness Classifications Classifications Fire Bacterial & Fungal Resistance Environment Acoustical Performance Warranty Fabrication 000020 000016 000012 000018 000001 000050 000060 000002 000002 000017 000017 000020 000016 000012 Avila Daylight Avila Twilight Avila ITEM ITEM

Avila Daylight™ & Avila Twilight™ Privacy | <1% openness Privacy | 0% openness | Blackout Avila Twilight™ Avila Daylight™ Privacy | 0% openness Privacy | <1% openness Fire rated for residential applications Fire rated for residential applications

A Translucent, Light-Filtering Fabric Introducing Avila Daylight, offered in the same five lightest colors of Avila Twilight, provides both privacy and natural daylighting while maintaining the option to be paired with Avila Twilight.

000060 Black

000050 Graphite

000001 Pewter

000018 Ash 063328 | 000012 Avila Twlight Frost

000012 000012 Frost Frost

000016 000016 Chalk Chalk

000020 000020 Linen Linen

000017 000017 Canvas Canvas

000002 000002 D63328 | 000012 White White Avila Daylight Frost

0% <1%