CLIPITS SLIPITS SLIPITS SLIPITS ACCESSORIES BYRD BYRD BYRD

C94CF BY04BK-2 UK PenKnife with carbon fi ber MEADOWLARK2 MOL1 MOLLE ADAPTER PLATE handle and CPM-S30V blade. The LIGHTWEIGHT Urban Professional among SLIPITS. MOLLE (Modular Lightweight Load-carrying Equipment) is the current UPGRADE ALERT!! system of load-bearing equipment based on the Pouch Attachment The Meadowlark2’s 3-inch blade is full fl at • Made in Golden, Colorado Ladder System (PALS). Consisting of a grid of nylon webbing, it allows The byrd Knife Line will be the subject of several bright ground, perfectly proportioned for effi ciency • Ambidextrous deep-pocket the modular attachment of pouches and other equipment to achieve and fresh engineering refi nements in 2010. byrds will have improved and cutting power. Handle fl aunts new deeper tip-up wire clip customized and mission-specifi c confi gurations. ergonomics and full-fl at ground high-performance 8Cr13MoV blades. texturing in the fi berglass reinforced nylon (FRN) • Finger choil for even better retention. • Spine jimping Spyderco’s new MOLLE Adapter Plate is a complete kit of components • Full fl at-ground blade allowing end-users to quickly and easily mount their Spyderco sheath knives BY03-2 CARA CARA2 STAINLESS • Ambidextrous tip-up/tip-down clip to any MOLLE platform with a vertical (handle-up or handle-down) or • Spine and choil jimping horizontal orientation. The heart of the system is a Boltaron® adapter Next evolution of the Cara Cara2 • Skeletonized nested handle liners C94TI C138 GRASSHOPPER plate that is attached to the MOLLE with one or two MALICE® Clips has a fl at-ground blade and • Screw construction (included). Screws, washers, and Chicago screw posts are then used to chamfered stainless handle, • Phosphor bronze bushings UK PenKnife with lightweight mount the sheath of your Spyderco fi xed-blade knife sheath using the offering pure high-performance Micro-sized SLIPIT for smooth open/close action titanium handle and CPM-S30V blade. existing holes for the G-Clip or large Tek-Lok™. The adapter plate kit without a large price tag. GrassHoppers draw remarks • FRN Bi-Directional Notch joint has smoother action than comes with an optional Velcro® strap that can be used as a secondary like “how cute” (a benefi cial Textured handle™ a traditional slip joint and a deep retention device when secured around the handle of your knife. Includes • Ambidextrous tip-up/tip- perception in a knife-cautious • David Boye Dent fi nger choil. An Olympian among detailed instructions and hardware necessary to mount any Spyderco fi xed- down clip world) yet offer real-world BY03G-2 • Full fl at-ground blade SLIPITS. blade or knives with mounting holes compatible with the G-Clip or large or • Spine and choil jimping cutting profi ciency. Similar in • Country of Origin: China small Tek-Loks. • Phosphor bronze bushings C143 LARGE size to conventional penknives, CARA CARA2 G-10 • Made in Golden, Colorado for smooth open/close their discreet Cr3 blades are LUM FOLDER • Ambidextrous deep-pocket Country of Origin: U.S.A. action Revamped G-10 Cara Cara2 with a fl at-ground blade, just over two-inches long. Their tip-up wire clip 3” (76mm) x 6-3/8” (162mm) • David Boye Dent spine jimping and a David Boye Dent. 4-way clip. Bob Lum did something no one else has. blades are held open, not locked, • Finger choil 2.41oz (68.5g) • Full fl at-ground blade He created a genesis, fusing a traditional by resistant pressure at pivot • Spine jimping • Country of Origin: China • Ambidextrous tip-up/tip-down clip Chinese fi xed blade and its ancient essence area. GrassHopper handles are • Full fl at-ground blade • Spine and choil jimping with features found in modern folding chamfered for comfort without rigid • Skeletonized nested handle liners knives resulting in a knife that stuns with corners to dig or bite into a gripping • Screw construction historical beauty and cuts with modern hand. Lanyard-hole accommodates a • Phosphor bronze bushings for smooth open/close impeccability. The large Chinese Folder pendant-chain or keyring. action has a fl at-ground VG-10 blade. The handle • David Boye Dent is black peel-ply G-10 with a Walker • Full fl at-ground blade LinerLock and 4-way tip-up/tip-down, • Country of Origin: China left-right-hand pocket clip. Tradition turned into an ergonomic folder. C94CF

C143 SPECS C94TI SPECS C138 SPECS C94CF SPECS BY03-2 SPECS BY03G-2 SPECS BY04BK-2 SPECS Steel: VG-10 Steel: CPM-S30V Steel: Cr3 Steel: CPM-S30V -2 Steel: 8Cr13MoV G-2 Steel: 8Cr13MoV BK-2 Steel: 8Cr3MoV C143 Weight: 4.3oz (123g) C94Ti Weight: 3.6oz (102g) C138 Weight: 1.4oz (39g) Weight: 2.2oz (63g) BY03 Weight: 5.6oz (160g) BY03 Weight: 4.25oz (121g) BY04 Weight: 2.4oz (67g) Edge: P Why SLIPITS? Edge: P Edge: P Edge: P Edge: P /PS Edge: P Edge: P/PS Country of Origin: Japan Country of Origin: U.S.A. Country of Origin: China Country of Origin: U.S.A. Country of Origin: China Country of Origin: China Country of Origin: China Knife buyers can appreciate the traditional aspects of non-locking folders Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Tip Carry: Up/Down and often gravitate to this knife style because where they live/work Tip Carry: Up Tip Carry: Tip Carry: Tip Carry: Tip Carry: MEASUREMENTS Up Up/Down Up/Down Up/Down could have laws prohibiting carrying/using pocketknives that lock open. Overall Length-Open: MEASUREMENTS Spyderco perceived a gap between traditional slipjoints and today’s modern MEASUREMENTS 5 1/32in. (128mm) MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS Spyderco Knives Inc. 2010 Spyderco Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: 8 9/16in. (217mm) locking folders and created a line of knives called SLIPITS. SLIPITS are 6 15/16in. (175mm) Overall Length-Closed: 6 15/16in. (175mm) 8 1/2in. (216mm) 8 1/2in. (216mm) 6 13/16in. (173mm 820 Spyderco Way reliable, cosmopolitan non-locking folders which open one-handedly, have 2 3/4in. (70mm) Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Golden, Colorado 80403 Mid-Year Supplemental Catalog 5 1/32in. (128mm) a fi nger choil for comfort and safety and are conveniently accessible. Their 4 1/16in. (103mm) Cutting Edge Length: 4 1/16in. (103mm) 4 3/4in. (121mm) 4 3/4in. (121mm) 4 1/32in. /102mm blades are held open by a notched joint at the knife’s pivot that produces 2 1/16in. (52mm) Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: At Spyderco quality is not an accident. It’s the result 3 7/16in. (87mm) resistance functionally similar to traditional slip-joint penknives. SLIPITS 2 5/8in. (67mm) P: 303-279-8383 or 1-800-525-7770 Blade Length: 2 5/8in. (67mm) 3 3/16in. (81mm) 3 3/16in. (81mm) 2 3/8in. / 61mm of focused intention, earnest effort, intelligent are the synthesis of modern and traditional knife designs. 2 5/16in. (59mm) F: 303-278-2229 Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: direction and careful execution. The result is the 3 3/4in. (95mm) 2 15/16in. (74mm) 2 15/16in. (74mm) 3 3/4in. (95 mm) 3 3/4in. (95mm) 2 7/8in./ 73mm *Beginning summer of 2010 our Lightweight UK Penknives will have a sum of wise choices and doing everything possible [email protected] blade steel change from GIN-1 to new Carpenter BD-1. to make quality knives, where steel meets the task. www.spyderco.com www.byrdknife.com

11 12 13 14 15 16 17 18 CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS

C139 JASON BREEDEN RESCUE C142 Knifemaker Bob Lum RESILIENCE died in 2007 but his knife Can a fl edgling Knifemaker’s style be established designs remain timeless. after just two knives? Jason Breeden’s has. Spyderco’s collection of His legacy Chinese Folder C135 PERRIN PPT Value Folders, bears the name is artistry in knifemaking, C10F C81-2 PARA-MILITARY2 He earned distinction as the knife designer who creates odd-shaped blades with his fi rst of admirable human true to Asian knives in ENDURA characteristics. Our economical its purity, simplicity and Why change something C101BK MANIX2 Fred Perrin doesn’t sit still, fi guratively Spyderco collaboration, the Captain. Critics Persistence is smallest, the function. Share the word; C11F if it works? Because we or physically. He’s perpetually in changed their tune after using the Captain C141 BALANCE Tenacious is mid-sized, and our we’re unveiling two new Lum practice the principle of BLACK BLADE motion, like a bullet-train picking up and experiencing its pure functionality, and DELICA new Resilience the largest. All meet Chinese folders. C.Q.I. - Constant Quality speed, as evidenced by his resume. dismissing its quirky appearance Balance is a state of equilibrium or equal as inconsequential. His and exceed our goal, of providing with full-fl at Improvement. If we can The Manix2 has been well received Fred has been a world-vetted tae kwon distribution. In our case it’s an Ed Schempp ground blade & second collaboration, the a level of cutting performance and improve it, refi ne it, upgrade since its 2010 release. An all-black do and stick-fi ghting champion, a folder that is symmetrical on each end when colored handles Spyderco/Breeden Rescue, is construction at a price-point that ergos or enhance cutting version arrives Summer 2010 with French Army Commando, a professional closed. Odd looks aside, when in the hand it’s equally unconventional. Like makes you say “hmm”? The C142 C65CF LUM performance, we do it. Our DLC (diamond-like coating) black blade, writer, a martial arts instructor and one ergonomically proportional and a natural fi t. The Classic Endura4 and all Breeden designs, it refl ects combines the very best Spyderco 2010 Para-Military2 has several black screws and black silhouette pocket of France’s most recognized professional VG-10 blade rears up in a radical curve with a deep CHINESE FOLDER Delica4 Lightweights Jason’s hard-use outdoor features: a 4-way Clip, screw- together changes. We’ve narrowed the clip. It features the Ball Bearing Lock® knifemakers and he’s only in his forties. fi nger choil. When the index fi nger sits in the choil, are now available in experiences in the Appalachian construction, phosphor bronze bushings, handle for better ergonomics. which consists of a hardened free-fl oating The latest product of his alliance with the blade feels like an extension of your hand. The NISHIGUN blue, green, brown, gray Mountains. A Sheepfoot- skeletonized steel liners, an enlarged The (closed) blade profi le is ball bearing contained in a custom hi-tech Spyderco is the Perrin PPT folder. P.P.T. refers enlarged Spyderco Round Hole is dead center on the and purple with full-fl at looking VG-10 blade is hollow- C140 SUPERLEAF opening hole, and spine and liner jimping CARBON FIBER now streamlined, eliminating any polymer cage. The round ball bearing allows to folder’s three designers; Fred Perrin, Philippe blade when closed and perfectly off-centered when ground blades. Injection ground, focusing strength on the with a fl at-ground blade 8Cr13MoV angles to catch or rub in a pocket. the lock to self adjust across a large surface, Perotti and Sacha Thiel. The lock is a crossbreed, Spyderco is often associated with leaf- open, positioning the thumb for smooth one-hand use. Carbon fi ber manufacturing is part molded FRN handles have tip of the blade where a knife sees blade. Feature-for-feature, dollar-for-dollar, Ambidextrously friendly four-way clip smoothly and consistently locking-up with blending elements of both Michael Walker’s shaped blades. They’re a time tested Carbon fi ber handle. Screw together construction. chemical, part mechanical. Carbon strands Bi-Directional Texturing® the greatest use (think, digging performance-for-performance the Resilience carries tip-up/tip-down, left/right- solid confi dence. Matte black non-refl ective LinerLock and Chris Reeve’s Reeve Integral Lock. design that shines in any application. Four way, left/right, tip-up/tip-down hourglass are drawn into fi bers then heated to high covering both sides for tactile or prying). The blade is thinned at adds one more must-have, best buy to the hand and rests deeper in the pocket. 154-CM blade is hollow-ground with aggressive The lock functions as a frame-lock but a G-10 scale Leaf blades are broad and fl at-ground stainless clip. Piped lanyard. Symphonic fi t and fi nish. temperatures expelling most of the non- traction and slip-resistant grip. the spine with a swedge-grind for Spyderco line-up. We lengthened the blade’s tip and added thumb serrations (jimping) above a super-sized overlaying the lock looks very LinerLockish. The from edge to spine. Requests for a carbon atoms. We call this carbonization and Dual skeletonized stainless balance and reduced weight. Black more surface jimping. A larger lanyard 14mm Spyderco Round Hole. Full-length black G-10 handle scales are milled with corrugated super-sized Leaf keep coming and in it leaves a fi ber of tightly inter-locked chains of liners elevate sturdiness G-10 handle has a Walker LinerLock, hole for a broader variety of attachment internal liners are scalloped around the edges, creases for skid-free and ergonomic handling. Its response, our SuperLeaf fulfi lls with carbon atoms when laminated into sheets, the and rigidity without adding four-way silhouette pocket clip and options. Implementation of our new extending slightly beyond the G-10 handle scales CPM-S30V steel blade is a modifi ed-Wharncliffe profi le a full fat-ground VG-10 PlainEdge resulting material is perfect for hard, lightweight weight and double as an piped lanyard hole. Bushing Pivot System generates fl uid adding jimping to a large portion of the handle’s with a fi nger choil, spine jimping and a tapered swedge. blade. A large expansion at the back and wear-resistance knife handles. Conventional anchor for attaching external/ Screw together construction. Left/right deep-carry carbon fi ber is woven horizontally and vertically in internal components. Blades action and more consistent manufacturing perimeter. Three-screw clip is left/right-hand of the black G-10 handle provides tolerances. Refi nements to the overall friendly and positions the folder tip-up when carried. pocket clip and lanyard hole open the door for endless better control and grip while pulling a basket pattern, but Japanese makers have devised are full fl at-ground VG-10 attachment options. a weaving method making circular and swirled with a thin cutting edge and construction from the G-10 textured handle and cutting and a hard-use rated to the CPM-S30V steel full-fl at blade shout Compression Lock® keeps it safely fi ber patterns. The result is revolutionary. Add to 13mm Spyderco Round Hole. this new technology is a VG-10 fl at-ground blade, Phosphor bronze washers. sharper performance and comfort. locked open. Left/right tip-up wire ® Walker LinerLock and right hand pocket clip. Four-way clip: tip-up/tip-down, Compression Lock . clip. left/right-hand.

C11F SPECS C10F SPECS C81-2 SPECS C101BK SPECS C135 SPECS C139 SPECS C140 SPECS C141 SPECS C142 SPECS C65CF SPECS Steel: VG-10 Steel: VG-10 Steel: CPM-S30V Steel: 154-CM Steel: CPM-S30V Steel: VG-10 Steel: VG-10 Steel: VG-10 Steel: 8Cr3MoV Steel: VG-10 C11 Weight: 2.3oz (64g) Weight: 3.4oz (96g) C81-2 Weight: 3.7oz (107g) C101BK Weight: 5oz (143g) C135 Weight: 5.3oz (150g) C139 Weight: 4.5oz (127g) C140 Weight: 4.7oz (140g) C141 Weight: 1.3oz (37g) C142 Weight: 5.4oz (154g) C65CF Weight: 3.0oz (86g) Edge: P Edge: P Edge: P/PS/S Edge: P Edge: P Edge: P Edge: P Edge: P Edge: P Edge: P Country of Origin: Japan Country of Origin: Japan Country of Origin: U.S.A. Country of Origin: U.S.A. Country of Origin: Taiwan Country of Origin: Japan Country of Origin: Japan Country of Origin: Japan Country of Origin: China Country of Origin: Japan C10 Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Right Tip Carry: Up/Down Tip Carry: Up/Down Tip Carry: Up/Down Tip Carry: Up Tip Carry: Up Tip Carry: Up/Down Tip Carry: Up Tip Carry: Up/Down Tip Carry: Up/Down Tip Carry: Up/Down

MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: 7 1/8in. (181mm) 8 3/4in. (222mm) 8 9/32in. (210mm) 8in. (203mm) 7 3/8 in. (187mm) 7 7/8in. (199mm) 7 15/16in. (202mm) 4 7/16in. /113mm 9 3/8in. (238mm) 7 3/16in. (183mm)

Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: 4 1/4in. (108mm) 5in. (127mm) 4 13/16in. (122mm) 4 5/8in. (117mm) 4 1/4in. (108mm) 4 7/16in. (113mm) 4 11/16in. (119mm) 2 5/8in. (67mm) 5 1/4in. (133mm) 4 1/4in. (108mm)

Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: 2 9/16in. (65mm) 3 7/16in. (88mm) 3 5/64in. (78mm) 2 7/8in. (73mm) 2 11/16in. (68mm) 2 15/16in. (75mm) 2 13/16 in. (71mm) 1 1/4in. (32mm) 4 1/4in. (108mm) 2 7/8in. (73mm)

Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: 2 7/8in. (73mm) 3 3/4in. (96mm) 3 7/16in. (87mm) 3 3/8in. (86mm) 3 5/32in. (80mm) 3 3/8in. (86mm) 3 7/16in. (87mm) 1 15/16in. (49mm) 4 1/4in. (108mm) 3 5/32in. (80mm)

1 2 3 4 5 6 7 8 9 10 CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS

C139 JASON BREEDEN RESCUE C142 Knifemaker Bob Lum RESILIENCE died in 2007 but his knife Can a fl edgling Knifemaker’s style be established designs remain timeless. after just two knives? Jason Breeden’s has. Spyderco’s collection of His legacy Chinese Folder C135 PERRIN PPT Value Folders, bears the name is artistry in knifemaking, C10F C81-2 PARA-MILITARY2 He earned distinction as the knife designer who creates odd-shaped blades with his fi rst of admirable human true to Asian knives in ENDURA characteristics. Our economical its purity, simplicity and Why change something C101BK MANIX2 Fred Perrin doesn’t sit still, fi guratively Spyderco collaboration, the Captain. Critics Persistence is smallest, the function. Share the word; C11F if it works? Because we or physically. He’s perpetually in changed their tune after using the Captain C141 BALANCE Tenacious is mid-sized, and our we’re unveiling two new Lum practice the principle of BLACK BLADE motion, like a bullet-train picking up and experiencing its pure functionality, and DELICA new Resilience the largest. All meet Chinese folders. C.Q.I. - Constant Quality speed, as evidenced by his resume. dismissing its quirky appearance Balance is a state of equilibrium or equal as inconsequential. His and exceed our goal, of providing with full-fl at Improvement. If we can The Manix2 has been well received Fred has been a world-vetted tae kwon distribution. In our case it’s an Ed Schempp ground blade & second collaboration, the a level of cutting performance and improve it, refi ne it, upgrade since its 2010 release. An all-black do and stick-fi ghting champion, a folder that is symmetrical on each end when colored handles Spyderco/Breeden Rescue, is construction at a price-point that ergos or enhance cutting version arrives Summer 2010 with French Army Commando, a professional closed. Odd looks aside, when in the hand it’s equally unconventional. Like makes you say “hmm”? The C142 C65CF LUM performance, we do it. Our DLC (diamond-like coating) black blade, writer, a martial arts instructor and one ergonomically proportional and a natural fi t. The Classic Endura4 and all Breeden designs, it refl ects combines the very best Spyderco 2010 Para-Military2 has several black screws and black silhouette pocket of France’s most recognized professional VG-10 blade rears up in a radical curve with a deep CHINESE FOLDER Delica4 Lightweights Jason’s hard-use outdoor features: a 4-way Clip, screw- together changes. We’ve narrowed the clip. It features the Ball Bearing Lock® knifemakers and he’s only in his forties. fi nger choil. When the index fi nger sits in the choil, are now available in experiences in the Appalachian construction, phosphor bronze bushings, handle for better ergonomics. which consists of a hardened free-fl oating The latest product of his alliance with the blade feels like an extension of your hand. The NISHIGUN blue, green, brown, gray Mountains. A Sheepfoot- skeletonized steel liners, an enlarged The (closed) blade profi le is ball bearing contained in a custom hi-tech Spyderco is the Perrin PPT folder. P.P.T. refers enlarged Spyderco Round Hole is dead center on the and purple with full-fl at looking VG-10 blade is hollow- C140 SUPERLEAF opening hole, and spine and liner jimping CARBON FIBER now streamlined, eliminating any polymer cage. The round ball bearing allows to folder’s three designers; Fred Perrin, Philippe blade when closed and perfectly off-centered when ground blades. Injection ground, focusing strength on the with a fl at-ground blade 8Cr13MoV angles to catch or rub in a pocket. the lock to self adjust across a large surface, Perotti and Sacha Thiel. The lock is a crossbreed, Spyderco is often associated with leaf- open, positioning the thumb for smooth one-hand use. Carbon fi ber manufacturing is part molded FRN handles have tip of the blade where a knife sees blade. Feature-for-feature, dollar-for-dollar, Ambidextrously friendly four-way clip smoothly and consistently locking-up with blending elements of both Michael Walker’s shaped blades. They’re a time tested Carbon fi ber handle. Screw together construction. chemical, part mechanical. Carbon strands Bi-Directional Texturing® the greatest use (think, digging performance-for-performance the Resilience carries tip-up/tip-down, left/right- solid confi dence. Matte black non-refl ective LinerLock and Chris Reeve’s Reeve Integral Lock. design that shines in any application. Four way, left/right, tip-up/tip-down hourglass are drawn into fi bers then heated to high covering both sides for tactile or prying). The blade is thinned at adds one more must-have, best buy to the hand and rests deeper in the pocket. 154-CM blade is hollow-ground with aggressive The lock functions as a frame-lock but a G-10 scale Leaf blades are broad and fl at-ground stainless clip. Piped lanyard. Symphonic fi t and fi nish. temperatures expelling most of the non- traction and slip-resistant grip. the spine with a swedge-grind for Spyderco line-up. We lengthened the blade’s tip and added thumb serrations (jimping) above a super-sized overlaying the lock looks very LinerLockish. The from edge to spine. Requests for a carbon atoms. We call this carbonization and Dual skeletonized stainless balance and reduced weight. Black more surface jimping. A larger lanyard 14mm Spyderco Round Hole. Full-length black G-10 handle scales are milled with corrugated super-sized Leaf keep coming and in it leaves a fi ber of tightly inter-locked chains of liners elevate sturdiness G-10 handle has a Walker LinerLock, hole for a broader variety of attachment internal liners are scalloped around the edges, creases for skid-free and ergonomic handling. Its response, our SuperLeaf fulfi lls with carbon atoms when laminated into sheets, the and rigidity without adding four-way silhouette pocket clip and options. Implementation of our new extending slightly beyond the G-10 handle scales CPM-S30V steel blade is a modifi ed-Wharncliffe profi le a full fat-ground VG-10 PlainEdge resulting material is perfect for hard, lightweight weight and double as an piped lanyard hole. Bushing Pivot System generates fl uid adding jimping to a large portion of the handle’s with a fi nger choil, spine jimping and a tapered swedge. blade. A large expansion at the back and wear-resistance knife handles. Conventional anchor for attaching external/ Screw together construction. Left/right deep-carry carbon fi ber is woven horizontally and vertically in internal components. Blades action and more consistent manufacturing perimeter. Three-screw clip is left/right-hand of the black G-10 handle provides tolerances. Refi nements to the overall friendly and positions the folder tip-up when carried. pocket clip and lanyard hole open the door for endless better control and grip while pulling a basket pattern, but Japanese makers have devised are full fl at-ground VG-10 attachment options. a weaving method making circular and swirled with a thin cutting edge and construction from the G-10 textured handle and cutting and a hard-use rated to the CPM-S30V steel full-fl at blade shout Compression Lock® keeps it safely fi ber patterns. The result is revolutionary. Add to 13mm Spyderco Round Hole. this new technology is a VG-10 fl at-ground blade, Phosphor bronze washers. sharper performance and comfort. locked open. Left/right tip-up wire ® Walker LinerLock and right hand pocket clip. Four-way clip: tip-up/tip-down, Compression Lock . clip. left/right-hand.

C11F SPECS C10F SPECS C81-2 SPECS C101BK SPECS C135 SPECS C139 SPECS C140 SPECS C141 SPECS C142 SPECS C65CF SPECS Steel: VG-10 Steel: VG-10 Steel: CPM-S30V Steel: 154-CM Steel: CPM-S30V Steel: VG-10 Steel: VG-10 Steel: VG-10 Steel: 8Cr3MoV Steel: VG-10 C11 Weight: 2.3oz (64g) Weight: 3.4oz (96g) C81-2 Weight: 3.7oz (107g) C101BK Weight: 5oz (143g) C135 Weight: 5.3oz (150g) C139 Weight: 4.5oz (127g) C140 Weight: 4.7oz (140g) C141 Weight: 1.3oz (37g) C142 Weight: 5.4oz (154g) C65CF Weight: 3.0oz (86g) Edge: P Edge: P Edge: P/PS/S Edge: P Edge: P Edge: P Edge: P Edge: P Edge: P Edge: P Country of Origin: Japan Country of Origin: Japan Country of Origin: U.S.A. Country of Origin: U.S.A. Country of Origin: Taiwan Country of Origin: Japan Country of Origin: Japan Country of Origin: Japan Country of Origin: China Country of Origin: Japan C10 Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Right Tip Carry: Up/Down Tip Carry: Up/Down Tip Carry: Up/Down Tip Carry: Up Tip Carry: Up Tip Carry: Up/Down Tip Carry: Up Tip Carry: Up/Down Tip Carry: Up/Down Tip Carry: Up/Down

MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: 7 1/8in. (181mm) 8 3/4in. (222mm) 8 9/32in. (210mm) 8in. (203mm) 7 3/8 in. (187mm) 7 7/8in. (199mm) 7 15/16in. (202mm) 4 7/16in. /113mm 9 3/8in. (238mm) 7 3/16in. (183mm)

Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: 4 1/4in. (108mm) 5in. (127mm) 4 13/16in. (122mm) 4 5/8in. (117mm) 4 1/4in. (108mm) 4 7/16in. (113mm) 4 11/16in. (119mm) 2 5/8in. (67mm) 5 1/4in. (133mm) 4 1/4in. (108mm)

Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: 2 9/16in. (65mm) 3 7/16in. (88mm) 3 5/64in. (78mm) 2 7/8in. (73mm) 2 11/16in. (68mm) 2 15/16in. (75mm) 2 13/16 in. (71mm) 1 1/4in. (32mm) 4 1/4in. (108mm) 2 7/8in. (73mm)

Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: 2 7/8in. (73mm) 3 3/4in. (96mm) 3 7/16in. (87mm) 3 3/8in. (86mm) 3 5/32in. (80mm) 3 3/8in. (86mm) 3 7/16in. (87mm) 1 15/16in. (49mm) 4 1/4in. (108mm) 3 5/32in. (80mm)

1 2 3 4 5 6 7 8 9 10 CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS

C139 JASON BREEDEN RESCUE C142 Knifemaker Bob Lum RESILIENCE died in 2007 but his knife Can a fl edgling Knifemaker’s style be established designs remain timeless. after just two knives? Jason Breeden’s has. Spyderco’s collection of His legacy Chinese Folder C135 PERRIN PPT Value Folders, bears the name is artistry in knifemaking, C10F C81-2 PARA-MILITARY2 He earned distinction as the knife designer who creates odd-shaped blades with his fi rst of admirable human true to Asian knives in ENDURA characteristics. Our economical its purity, simplicity and Why change something C101BK MANIX2 Fred Perrin doesn’t sit still, fi guratively Spyderco collaboration, the Captain. Critics Persistence is smallest, the function. Share the word; C11F if it works? Because we or physically. He’s perpetually in changed their tune after using the Captain C141 BALANCE Tenacious is mid-sized, and our we’re unveiling two new Lum practice the principle of BLACK BLADE motion, like a bullet-train picking up and experiencing its pure functionality, and DELICA new Resilience the largest. All meet Chinese folders. C.Q.I. - Constant Quality speed, as evidenced by his resume. dismissing its quirky appearance Balance is a state of equilibrium or equal as inconsequential. His and exceed our goal, of providing with full-fl at Improvement. If we can The Manix2 has been well received Fred has been a world-vetted tae kwon distribution. In our case it’s an Ed Schempp ground blade & second collaboration, the a level of cutting performance and improve it, refi ne it, upgrade since its 2010 release. An all-black do and stick-fi ghting champion, a folder that is symmetrical on each end when colored handles Spyderco/Breeden Rescue, is construction at a price-point that ergos or enhance cutting version arrives Summer 2010 with French Army Commando, a professional closed. Odd looks aside, when in the hand it’s equally unconventional. Like makes you say “hmm”? The C142 C65CF LUM performance, we do it. Our DLC (diamond-like coating) black blade, writer, a martial arts instructor and one ergonomically proportional and a natural fi t. The Classic Endura4 and all Breeden designs, it refl ects combines the very best Spyderco 2010 Para-Military2 has several black screws and black silhouette pocket of France’s most recognized professional VG-10 blade rears up in a radical curve with a deep CHINESE FOLDER Delica4 Lightweights Jason’s hard-use outdoor features: a 4-way Clip, screw- together changes. We’ve narrowed the clip. It features the Ball Bearing Lock® knifemakers and he’s only in his forties. fi nger choil. When the index fi nger sits in the choil, are now available in experiences in the Appalachian construction, phosphor bronze bushings, handle for better ergonomics. which consists of a hardened free-fl oating The latest product of his alliance with the blade feels like an extension of your hand. The NISHIGUN blue, green, brown, gray Mountains. A Sheepfoot- skeletonized steel liners, an enlarged The (closed) blade profi le is ball bearing contained in a custom hi-tech Spyderco is the Perrin PPT folder. P.P.T. refers enlarged Spyderco Round Hole is dead center on the and purple with full-fl at looking VG-10 blade is hollow- C140 SUPERLEAF opening hole, and spine and liner jimping CARBON FIBER now streamlined, eliminating any polymer cage. The round ball bearing allows to folder’s three designers; Fred Perrin, Philippe blade when closed and perfectly off-centered when ground blades. Injection ground, focusing strength on the with a fl at-ground blade 8Cr13MoV angles to catch or rub in a pocket. the lock to self adjust across a large surface, Perotti and Sacha Thiel. The lock is a crossbreed, Spyderco is often associated with leaf- open, positioning the thumb for smooth one-hand use. Carbon fi ber manufacturing is part molded FRN handles have tip of the blade where a knife sees blade. Feature-for-feature, dollar-for-dollar, Ambidextrously friendly four-way clip smoothly and consistently locking-up with blending elements of both Michael Walker’s shaped blades. They’re a time tested Carbon fi ber handle. Screw together construction. chemical, part mechanical. Carbon strands Bi-Directional Texturing® the greatest use (think, digging performance-for-performance the Resilience carries tip-up/tip-down, left/right- solid confi dence. Matte black non-refl ective LinerLock and Chris Reeve’s Reeve Integral Lock. design that shines in any application. Four way, left/right, tip-up/tip-down hourglass are drawn into fi bers then heated to high covering both sides for tactile or prying). The blade is thinned at adds one more must-have, best buy to the hand and rests deeper in the pocket. 154-CM blade is hollow-ground with aggressive The lock functions as a frame-lock but a G-10 scale Leaf blades are broad and fl at-ground stainless clip. Piped lanyard. Symphonic fi t and fi nish. temperatures expelling most of the non- traction and slip-resistant grip. the spine with a swedge-grind for Spyderco line-up. We lengthened the blade’s tip and added thumb serrations (jimping) above a super-sized overlaying the lock looks very LinerLockish. The from edge to spine. Requests for a carbon atoms. We call this carbonization and Dual skeletonized stainless balance and reduced weight. Black more surface jimping. A larger lanyard 14mm Spyderco Round Hole. Full-length black G-10 handle scales are milled with corrugated super-sized Leaf keep coming and in it leaves a fi ber of tightly inter-locked chains of liners elevate sturdiness G-10 handle has a Walker LinerLock, hole for a broader variety of attachment internal liners are scalloped around the edges, creases for skid-free and ergonomic handling. Its response, our SuperLeaf fulfi lls with carbon atoms when laminated into sheets, the and rigidity without adding four-way silhouette pocket clip and options. Implementation of our new extending slightly beyond the G-10 handle scales CPM-S30V steel blade is a modifi ed-Wharncliffe profi le a full fat-ground VG-10 PlainEdge resulting material is perfect for hard, lightweight weight and double as an piped lanyard hole. Bushing Pivot System generates fl uid adding jimping to a large portion of the handle’s with a fi nger choil, spine jimping and a tapered swedge. blade. A large expansion at the back and wear-resistance knife handles. Conventional anchor for attaching external/ Screw together construction. Left/right deep-carry carbon fi ber is woven horizontally and vertically in internal components. Blades action and more consistent manufacturing perimeter. Three-screw clip is left/right-hand of the black G-10 handle provides tolerances. Refi nements to the overall friendly and positions the folder tip-up when carried. pocket clip and lanyard hole open the door for endless better control and grip while pulling a basket pattern, but Japanese makers have devised are full fl at-ground VG-10 attachment options. a weaving method making circular and swirled with a thin cutting edge and construction from the G-10 textured handle and cutting and a hard-use rated to the CPM-S30V steel full-fl at blade shout Compression Lock® keeps it safely fi ber patterns. The result is revolutionary. Add to 13mm Spyderco Round Hole. this new technology is a VG-10 fl at-ground blade, Phosphor bronze washers. sharper performance and comfort. locked open. Left/right tip-up wire ® Walker LinerLock and right hand pocket clip. Four-way clip: tip-up/tip-down, Compression Lock . clip. left/right-hand.

C11F SPECS C10F SPECS C81-2 SPECS C101BK SPECS C135 SPECS C139 SPECS C140 SPECS C141 SPECS C142 SPECS C65CF SPECS Steel: VG-10 Steel: VG-10 Steel: CPM-S30V Steel: 154-CM Steel: CPM-S30V Steel: VG-10 Steel: VG-10 Steel: VG-10 Steel: 8Cr3MoV Steel: VG-10 C11 Weight: 2.3oz (64g) Weight: 3.4oz (96g) C81-2 Weight: 3.7oz (107g) C101BK Weight: 5oz (143g) C135 Weight: 5.3oz (150g) C139 Weight: 4.5oz (127g) C140 Weight: 4.7oz (140g) C141 Weight: 1.3oz (37g) C142 Weight: 5.4oz (154g) C65CF Weight: 3.0oz (86g) Edge: P Edge: P Edge: P/PS/S Edge: P Edge: P Edge: P Edge: P Edge: P Edge: P Edge: P Country of Origin: Japan Country of Origin: Japan Country of Origin: U.S.A. Country of Origin: U.S.A. Country of Origin: Taiwan Country of Origin: Japan Country of Origin: Japan Country of Origin: Japan Country of Origin: China Country of Origin: Japan C10 Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Right Tip Carry: Up/Down Tip Carry: Up/Down Tip Carry: Up/Down Tip Carry: Up Tip Carry: Up Tip Carry: Up/Down Tip Carry: Up Tip Carry: Up/Down Tip Carry: Up/Down Tip Carry: Up/Down

MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: 7 1/8in. (181mm) 8 3/4in. (222mm) 8 9/32in. (210mm) 8in. (203mm) 7 3/8 in. (187mm) 7 7/8in. (199mm) 7 15/16in. (202mm) 4 7/16in. /113mm 9 3/8in. (238mm) 7 3/16in. (183mm)

Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: 4 1/4in. (108mm) 5in. (127mm) 4 13/16in. (122mm) 4 5/8in. (117mm) 4 1/4in. (108mm) 4 7/16in. (113mm) 4 11/16in. (119mm) 2 5/8in. (67mm) 5 1/4in. (133mm) 4 1/4in. (108mm)

Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: 2 9/16in. (65mm) 3 7/16in. (88mm) 3 5/64in. (78mm) 2 7/8in. (73mm) 2 11/16in. (68mm) 2 15/16in. (75mm) 2 13/16 in. (71mm) 1 1/4in. (32mm) 4 1/4in. (108mm) 2 7/8in. (73mm)

Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: 2 7/8in. (73mm) 3 3/4in. (96mm) 3 7/16in. (87mm) 3 3/8in. (86mm) 3 5/32in. (80mm) 3 3/8in. (86mm) 3 7/16in. (87mm) 1 15/16in. (49mm) 4 1/4in. (108mm) 3 5/32in. (80mm)

1 2 3 4 5 6 7 8 9 10 CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS

C139 JASON BREEDEN RESCUE C142 Knifemaker Bob Lum RESILIENCE died in 2007 but his knife Can a fl edgling Knifemaker’s style be established designs remain timeless. after just two knives? Jason Breeden’s has. Spyderco’s collection of His legacy Chinese Folder C135 PERRIN PPT Value Folders, bears the name is artistry in knifemaking, C10F C81-2 PARA-MILITARY2 He earned distinction as the knife designer who creates odd-shaped blades with his fi rst of admirable human true to Asian knives in ENDURA characteristics. Our economical its purity, simplicity and Why change something C101BK MANIX2 Fred Perrin doesn’t sit still, fi guratively Spyderco collaboration, the Captain. Critics Persistence is smallest, the function. Share the word; C11F if it works? Because we or physically. He’s perpetually in changed their tune after using the Captain C141 BALANCE Tenacious is mid-sized, and our we’re unveiling two new Lum practice the principle of BLACK BLADE motion, like a bullet-train picking up and experiencing its pure functionality, and DELICA new Resilience the largest. All meet Chinese folders. C.Q.I. - Constant Quality speed, as evidenced by his resume. dismissing its quirky appearance Balance is a state of equilibrium or equal as inconsequential. His and exceed our goal, of providing with full-fl at Improvement. If we can The Manix2 has been well received Fred has been a world-vetted tae kwon distribution. In our case it’s an Ed Schempp ground blade & second collaboration, the a level of cutting performance and improve it, refi ne it, upgrade since its 2010 release. An all-black do and stick-fi ghting champion, a folder that is symmetrical on each end when colored handles Spyderco/Breeden Rescue, is construction at a price-point that ergos or enhance cutting version arrives Summer 2010 with French Army Commando, a professional closed. Odd looks aside, when in the hand it’s equally unconventional. Like makes you say “hmm”? The C142 C65CF LUM performance, we do it. Our DLC (diamond-like coating) black blade, writer, a martial arts instructor and one ergonomically proportional and a natural fi t. The Classic Endura4 and all Breeden designs, it refl ects combines the very best Spyderco 2010 Para-Military2 has several black screws and black silhouette pocket of France’s most recognized professional VG-10 blade rears up in a radical curve with a deep CHINESE FOLDER Delica4 Lightweights Jason’s hard-use outdoor features: a 4-way Clip, screw- together changes. We’ve narrowed the clip. It features the Ball Bearing Lock® knifemakers and he’s only in his forties. fi nger choil. When the index fi nger sits in the choil, are now available in experiences in the Appalachian construction, phosphor bronze bushings, handle for better ergonomics. which consists of a hardened free-fl oating The latest product of his alliance with the blade feels like an extension of your hand. The NISHIGUN blue, green, brown, gray Mountains. A Sheepfoot- skeletonized steel liners, an enlarged The (closed) blade profi le is ball bearing contained in a custom hi-tech Spyderco is the Perrin PPT folder. P.P.T. refers enlarged Spyderco Round Hole is dead center on the and purple with full-fl at looking VG-10 blade is hollow- C140 SUPERLEAF opening hole, and spine and liner jimping CARBON FIBER now streamlined, eliminating any polymer cage. The round ball bearing allows to folder’s three designers; Fred Perrin, Philippe blade when closed and perfectly off-centered when ground blades. Injection ground, focusing strength on the with a fl at-ground blade 8Cr13MoV angles to catch or rub in a pocket. the lock to self adjust across a large surface, Perotti and Sacha Thiel. The lock is a crossbreed, Spyderco is often associated with leaf- open, positioning the thumb for smooth one-hand use. Carbon fi ber manufacturing is part molded FRN handles have tip of the blade where a knife sees blade. Feature-for-feature, dollar-for-dollar, Ambidextrously friendly four-way clip smoothly and consistently locking-up with blending elements of both Michael Walker’s shaped blades. They’re a time tested Carbon fi ber handle. Screw together construction. chemical, part mechanical. Carbon strands Bi-Directional Texturing® the greatest use (think, digging performance-for-performance the Resilience carries tip-up/tip-down, left/right- solid confi dence. Matte black non-refl ective LinerLock and Chris Reeve’s Reeve Integral Lock. design that shines in any application. Four way, left/right, tip-up/tip-down hourglass are drawn into fi bers then heated to high covering both sides for tactile or prying). The blade is thinned at adds one more must-have, best buy to the hand and rests deeper in the pocket. 154-CM blade is hollow-ground with aggressive The lock functions as a frame-lock but a G-10 scale Leaf blades are broad and fl at-ground stainless clip. Piped lanyard. Symphonic fi t and fi nish. temperatures expelling most of the non- traction and slip-resistant grip. the spine with a swedge-grind for Spyderco line-up. We lengthened the blade’s tip and added thumb serrations (jimping) above a super-sized overlaying the lock looks very LinerLockish. The from edge to spine. Requests for a carbon atoms. We call this carbonization and Dual skeletonized stainless balance and reduced weight. Black more surface jimping. A larger lanyard 14mm Spyderco Round Hole. Full-length black G-10 handle scales are milled with corrugated super-sized Leaf keep coming and in it leaves a fi ber of tightly inter-locked chains of liners elevate sturdiness G-10 handle has a Walker LinerLock, hole for a broader variety of attachment internal liners are scalloped around the edges, creases for skid-free and ergonomic handling. Its response, our SuperLeaf fulfi lls with carbon atoms when laminated into sheets, the and rigidity without adding four-way silhouette pocket clip and options. Implementation of our new extending slightly beyond the G-10 handle scales CPM-S30V steel blade is a modifi ed-Wharncliffe profi le a full fat-ground VG-10 PlainEdge resulting material is perfect for hard, lightweight weight and double as an piped lanyard hole. Bushing Pivot System generates fl uid adding jimping to a large portion of the handle’s with a fi nger choil, spine jimping and a tapered swedge. blade. A large expansion at the back and wear-resistance knife handles. Conventional anchor for attaching external/ Screw together construction. Left/right deep-carry carbon fi ber is woven horizontally and vertically in internal components. Blades action and more consistent manufacturing perimeter. Three-screw clip is left/right-hand of the black G-10 handle provides tolerances. Refi nements to the overall friendly and positions the folder tip-up when carried. pocket clip and lanyard hole open the door for endless better control and grip while pulling a basket pattern, but Japanese makers have devised are full fl at-ground VG-10 attachment options. a weaving method making circular and swirled with a thin cutting edge and construction from the G-10 textured handle and cutting and a hard-use rated to the CPM-S30V steel full-fl at blade shout Compression Lock® keeps it safely fi ber patterns. The result is revolutionary. Add to 13mm Spyderco Round Hole. this new technology is a VG-10 fl at-ground blade, Phosphor bronze washers. sharper performance and comfort. locked open. Left/right tip-up wire ® Walker LinerLock and right hand pocket clip. Four-way clip: tip-up/tip-down, Compression Lock . clip. left/right-hand.

C11F SPECS C10F SPECS C81-2 SPECS C101BK SPECS C135 SPECS C139 SPECS C140 SPECS C141 SPECS C142 SPECS C65CF SPECS Steel: VG-10 Steel: VG-10 Steel: CPM-S30V Steel: 154-CM Steel: CPM-S30V Steel: VG-10 Steel: VG-10 Steel: VG-10 Steel: 8Cr3MoV Steel: VG-10 C11 Weight: 2.3oz (64g) Weight: 3.4oz (96g) C81-2 Weight: 3.7oz (107g) C101BK Weight: 5oz (143g) C135 Weight: 5.3oz (150g) C139 Weight: 4.5oz (127g) C140 Weight: 4.7oz (140g) C141 Weight: 1.3oz (37g) C142 Weight: 5.4oz (154g) C65CF Weight: 3.0oz (86g) Edge: P Edge: P Edge: P/PS/S Edge: P Edge: P Edge: P Edge: P Edge: P Edge: P Edge: P Country of Origin: Japan Country of Origin: Japan Country of Origin: U.S.A. Country of Origin: U.S.A. Country of Origin: Taiwan Country of Origin: Japan Country of Origin: Japan Country of Origin: Japan Country of Origin: China Country of Origin: Japan C10 Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Right Tip Carry: Up/Down Tip Carry: Up/Down Tip Carry: Up/Down Tip Carry: Up Tip Carry: Up Tip Carry: Up/Down Tip Carry: Up Tip Carry: Up/Down Tip Carry: Up/Down Tip Carry: Up/Down

MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: 7 1/8in. (181mm) 8 3/4in. (222mm) 8 9/32in. (210mm) 8in. (203mm) 7 3/8 in. (187mm) 7 7/8in. (199mm) 7 15/16in. (202mm) 4 7/16in. /113mm 9 3/8in. (238mm) 7 3/16in. (183mm)

Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: 4 1/4in. (108mm) 5in. (127mm) 4 13/16in. (122mm) 4 5/8in. (117mm) 4 1/4in. (108mm) 4 7/16in. (113mm) 4 11/16in. (119mm) 2 5/8in. (67mm) 5 1/4in. (133mm) 4 1/4in. (108mm)

Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: 2 9/16in. (65mm) 3 7/16in. (88mm) 3 5/64in. (78mm) 2 7/8in. (73mm) 2 11/16in. (68mm) 2 15/16in. (75mm) 2 13/16 in. (71mm) 1 1/4in. (32mm) 4 1/4in. (108mm) 2 7/8in. (73mm)

Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: 2 7/8in. (73mm) 3 3/4in. (96mm) 3 7/16in. (87mm) 3 3/8in. (86mm) 3 5/32in. (80mm) 3 3/8in. (86mm) 3 7/16in. (87mm) 1 15/16in. (49mm) 4 1/4in. (108mm) 3 5/32in. (80mm)

1 2 3 4 5 6 7 8 9 10 CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS

C139 JASON BREEDEN RESCUE C142 Knifemaker Bob Lum RESILIENCE died in 2007 but his knife Can a fl edgling Knifemaker’s style be established designs remain timeless. after just two knives? Jason Breeden’s has. Spyderco’s collection of His legacy Chinese Folder C135 PERRIN PPT Value Folders, bears the name is artistry in knifemaking, C10F C81-2 PARA-MILITARY2 He earned distinction as the knife designer who creates odd-shaped blades with his fi rst of admirable human true to Asian knives in ENDURA characteristics. Our economical its purity, simplicity and Why change something C101BK MANIX2 Fred Perrin doesn’t sit still, fi guratively Spyderco collaboration, the Captain. Critics Persistence is smallest, the function. Share the word; C11F if it works? Because we or physically. He’s perpetually in changed their tune after using the Captain C141 BALANCE Tenacious is mid-sized, and our we’re unveiling two new Lum practice the principle of BLACK BLADE motion, like a bullet-train picking up and experiencing its pure functionality, and DELICA new Resilience the largest. All meet Chinese folders. C.Q.I. - Constant Quality speed, as evidenced by his resume. dismissing its quirky appearance Balance is a state of equilibrium or equal as inconsequential. His and exceed our goal, of providing with full-fl at Improvement. If we can The Manix2 has been well received Fred has been a world-vetted tae kwon distribution. In our case it’s an Ed Schempp ground blade & second collaboration, the a level of cutting performance and improve it, refi ne it, upgrade since its 2010 release. An all-black do and stick-fi ghting champion, a folder that is symmetrical on each end when colored handles Spyderco/Breeden Rescue, is construction at a price-point that ergos or enhance cutting version arrives Summer 2010 with French Army Commando, a professional closed. Odd looks aside, when in the hand it’s equally unconventional. Like makes you say “hmm”? The C142 C65CF LUM performance, we do it. Our DLC (diamond-like coating) black blade, writer, a martial arts instructor and one ergonomically proportional and a natural fi t. The Classic Endura4 and all Breeden designs, it refl ects combines the very best Spyderco 2010 Para-Military2 has several black screws and black silhouette pocket of France’s most recognized professional VG-10 blade rears up in a radical curve with a deep CHINESE FOLDER Delica4 Lightweights Jason’s hard-use outdoor features: a 4-way Clip, screw- together changes. We’ve narrowed the clip. It features the Ball Bearing Lock® knifemakers and he’s only in his forties. fi nger choil. When the index fi nger sits in the choil, are now available in experiences in the Appalachian construction, phosphor bronze bushings, handle for better ergonomics. which consists of a hardened free-fl oating The latest product of his alliance with the blade feels like an extension of your hand. The NISHIGUN blue, green, brown, gray Mountains. A Sheepfoot- skeletonized steel liners, an enlarged The (closed) blade profi le is ball bearing contained in a custom hi-tech Spyderco is the Perrin PPT folder. P.P.T. refers enlarged Spyderco Round Hole is dead center on the and purple with full-fl at looking VG-10 blade is hollow- C140 SUPERLEAF opening hole, and spine and liner jimping CARBON FIBER now streamlined, eliminating any polymer cage. The round ball bearing allows to folder’s three designers; Fred Perrin, Philippe blade when closed and perfectly off-centered when ground blades. Injection ground, focusing strength on the with a fl at-ground blade 8Cr13MoV angles to catch or rub in a pocket. the lock to self adjust across a large surface, Perotti and Sacha Thiel. The lock is a crossbreed, Spyderco is often associated with leaf- open, positioning the thumb for smooth one-hand use. Carbon fi ber manufacturing is part molded FRN handles have tip of the blade where a knife sees blade. Feature-for-feature, dollar-for-dollar, Ambidextrously friendly four-way clip smoothly and consistently locking-up with blending elements of both Michael Walker’s shaped blades. They’re a time tested Carbon fi ber handle. Screw together construction. chemical, part mechanical. Carbon strands Bi-Directional Texturing® the greatest use (think, digging performance-for-performance the Resilience carries tip-up/tip-down, left/right- solid confi dence. Matte black non-refl ective LinerLock and Chris Reeve’s Reeve Integral Lock. design that shines in any application. Four way, left/right, tip-up/tip-down hourglass are drawn into fi bers then heated to high covering both sides for tactile or prying). The blade is thinned at adds one more must-have, best buy to the hand and rests deeper in the pocket. 154-CM blade is hollow-ground with aggressive The lock functions as a frame-lock but a G-10 scale Leaf blades are broad and fl at-ground stainless clip. Piped lanyard. Symphonic fi t and fi nish. temperatures expelling most of the non- traction and slip-resistant grip. the spine with a swedge-grind for Spyderco line-up. We lengthened the blade’s tip and added thumb serrations (jimping) above a super-sized overlaying the lock looks very LinerLockish. The from edge to spine. Requests for a carbon atoms. We call this carbonization and Dual skeletonized stainless balance and reduced weight. Black more surface jimping. A larger lanyard 14mm Spyderco Round Hole. Full-length black G-10 handle scales are milled with corrugated super-sized Leaf keep coming and in it leaves a fi ber of tightly inter-locked chains of liners elevate sturdiness G-10 handle has a Walker LinerLock, hole for a broader variety of attachment internal liners are scalloped around the edges, creases for skid-free and ergonomic handling. Its response, our SuperLeaf fulfi lls with carbon atoms when laminated into sheets, the and rigidity without adding four-way silhouette pocket clip and options. Implementation of our new extending slightly beyond the G-10 handle scales CPM-S30V steel blade is a modifi ed-Wharncliffe profi le a full fat-ground VG-10 PlainEdge resulting material is perfect for hard, lightweight weight and double as an piped lanyard hole. Bushing Pivot System generates fl uid adding jimping to a large portion of the handle’s with a fi nger choil, spine jimping and a tapered swedge. blade. A large expansion at the back and wear-resistance knife handles. Conventional anchor for attaching external/ Screw together construction. Left/right deep-carry carbon fi ber is woven horizontally and vertically in internal components. Blades action and more consistent manufacturing perimeter. Three-screw clip is left/right-hand of the black G-10 handle provides tolerances. Refi nements to the overall friendly and positions the folder tip-up when carried. pocket clip and lanyard hole open the door for endless better control and grip while pulling a basket pattern, but Japanese makers have devised are full fl at-ground VG-10 attachment options. a weaving method making circular and swirled with a thin cutting edge and construction from the G-10 textured handle and cutting and a hard-use rated to the CPM-S30V steel full-fl at blade shout Compression Lock® keeps it safely fi ber patterns. The result is revolutionary. Add to 13mm Spyderco Round Hole. this new technology is a VG-10 fl at-ground blade, Phosphor bronze washers. sharper performance and comfort. locked open. Left/right tip-up wire ® Walker LinerLock and right hand pocket clip. Four-way clip: tip-up/tip-down, Compression Lock . clip. left/right-hand.

C11F SPECS C10F SPECS C81-2 SPECS C101BK SPECS C135 SPECS C139 SPECS C140 SPECS C141 SPECS C142 SPECS C65CF SPECS Steel: VG-10 Steel: VG-10 Steel: CPM-S30V Steel: 154-CM Steel: CPM-S30V Steel: VG-10 Steel: VG-10 Steel: VG-10 Steel: 8Cr3MoV Steel: VG-10 C11 Weight: 2.3oz (64g) Weight: 3.4oz (96g) C81-2 Weight: 3.7oz (107g) C101BK Weight: 5oz (143g) C135 Weight: 5.3oz (150g) C139 Weight: 4.5oz (127g) C140 Weight: 4.7oz (140g) C141 Weight: 1.3oz (37g) C142 Weight: 5.4oz (154g) C65CF Weight: 3.0oz (86g) Edge: P Edge: P Edge: P/PS/S Edge: P Edge: P Edge: P Edge: P Edge: P Edge: P Edge: P Country of Origin: Japan Country of Origin: Japan Country of Origin: U.S.A. Country of Origin: U.S.A. Country of Origin: Taiwan Country of Origin: Japan Country of Origin: Japan Country of Origin: Japan Country of Origin: China Country of Origin: Japan C10 Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Right Tip Carry: Up/Down Tip Carry: Up/Down Tip Carry: Up/Down Tip Carry: Up Tip Carry: Up Tip Carry: Up/Down Tip Carry: Up Tip Carry: Up/Down Tip Carry: Up/Down Tip Carry: Up/Down

MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: 7 1/8in. (181mm) 8 3/4in. (222mm) 8 9/32in. (210mm) 8in. (203mm) 7 3/8 in. (187mm) 7 7/8in. (199mm) 7 15/16in. (202mm) 4 7/16in. /113mm 9 3/8in. (238mm) 7 3/16in. (183mm)

Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: 4 1/4in. (108mm) 5in. (127mm) 4 13/16in. (122mm) 4 5/8in. (117mm) 4 1/4in. (108mm) 4 7/16in. (113mm) 4 11/16in. (119mm) 2 5/8in. (67mm) 5 1/4in. (133mm) 4 1/4in. (108mm)

Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: 2 9/16in. (65mm) 3 7/16in. (88mm) 3 5/64in. (78mm) 2 7/8in. (73mm) 2 11/16in. (68mm) 2 15/16in. (75mm) 2 13/16 in. (71mm) 1 1/4in. (32mm) 4 1/4in. (108mm) 2 7/8in. (73mm)

Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: 2 7/8in. (73mm) 3 3/4in. (96mm) 3 7/16in. (87mm) 3 3/8in. (86mm) 3 5/32in. (80mm) 3 3/8in. (86mm) 3 7/16in. (87mm) 1 15/16in. (49mm) 4 1/4in. (108mm) 3 5/32in. (80mm)

1 2 3 4 5 6 7 8 9 10 CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS

C139 JASON BREEDEN RESCUE C142 Knifemaker Bob Lum RESILIENCE died in 2007 but his knife Can a fl edgling Knifemaker’s style be established designs remain timeless. after just two knives? Jason Breeden’s has. Spyderco’s collection of His legacy Chinese Folder C135 PERRIN PPT Value Folders, bears the name is artistry in knifemaking, C10F C81-2 PARA-MILITARY2 He earned distinction as the knife designer who creates odd-shaped blades with his fi rst of admirable human true to Asian knives in ENDURA characteristics. Our economical its purity, simplicity and Why change something C101BK MANIX2 Fred Perrin doesn’t sit still, fi guratively Spyderco collaboration, the Captain. Critics Persistence is smallest, the function. Share the word; C11F if it works? Because we or physically. He’s perpetually in changed their tune after using the Captain C141 BALANCE Tenacious is mid-sized, and our we’re unveiling two new Lum practice the principle of BLACK BLADE motion, like a bullet-train picking up and experiencing its pure functionality, and DELICA new Resilience the largest. All meet Chinese folders. C.Q.I. - Constant Quality speed, as evidenced by his resume. dismissing its quirky appearance Balance is a state of equilibrium or equal as inconsequential. His and exceed our goal, of providing with full-fl at Improvement. If we can The Manix2 has been well received Fred has been a world-vetted tae kwon distribution. In our case it’s an Ed Schempp ground blade & second collaboration, the a level of cutting performance and improve it, refi ne it, upgrade since its 2010 release. An all-black do and stick-fi ghting champion, a folder that is symmetrical on each end when colored handles Spyderco/Breeden Rescue, is construction at a price-point that ergos or enhance cutting version arrives Summer 2010 with French Army Commando, a professional closed. Odd looks aside, when in the hand it’s equally unconventional. Like makes you say “hmm”? The C142 C65CF LUM performance, we do it. Our DLC (diamond-like coating) black blade, writer, a martial arts instructor and one ergonomically proportional and a natural fi t. The Classic Endura4 and all Breeden designs, it refl ects combines the very best Spyderco 2010 Para-Military2 has several black screws and black silhouette pocket of France’s most recognized professional VG-10 blade rears up in a radical curve with a deep CHINESE FOLDER Delica4 Lightweights Jason’s hard-use outdoor features: a 4-way Clip, screw- together changes. We’ve narrowed the clip. It features the Ball Bearing Lock® knifemakers and he’s only in his forties. fi nger choil. When the index fi nger sits in the choil, are now available in experiences in the Appalachian construction, phosphor bronze bushings, handle for better ergonomics. which consists of a hardened free-fl oating The latest product of his alliance with the blade feels like an extension of your hand. The NISHIGUN blue, green, brown, gray Mountains. A Sheepfoot- skeletonized steel liners, an enlarged The (closed) blade profi le is ball bearing contained in a custom hi-tech Spyderco is the Perrin PPT folder. P.P.T. refers enlarged Spyderco Round Hole is dead center on the and purple with full-fl at looking VG-10 blade is hollow- C140 SUPERLEAF opening hole, and spine and liner jimping CARBON FIBER now streamlined, eliminating any polymer cage. The round ball bearing allows to folder’s three designers; Fred Perrin, Philippe blade when closed and perfectly off-centered when ground blades. Injection ground, focusing strength on the with a fl at-ground blade 8Cr13MoV angles to catch or rub in a pocket. the lock to self adjust across a large surface, Perotti and Sacha Thiel. The lock is a crossbreed, Spyderco is often associated with leaf- open, positioning the thumb for smooth one-hand use. Carbon fi ber manufacturing is part molded FRN handles have tip of the blade where a knife sees blade. Feature-for-feature, dollar-for-dollar, Ambidextrously friendly four-way clip smoothly and consistently locking-up with blending elements of both Michael Walker’s shaped blades. They’re a time tested Carbon fi ber handle. Screw together construction. chemical, part mechanical. Carbon strands Bi-Directional Texturing® the greatest use (think, digging performance-for-performance the Resilience carries tip-up/tip-down, left/right- solid confi dence. Matte black non-refl ective LinerLock and Chris Reeve’s Reeve Integral Lock. design that shines in any application. Four way, left/right, tip-up/tip-down hourglass are drawn into fi bers then heated to high covering both sides for tactile or prying). The blade is thinned at adds one more must-have, best buy to the hand and rests deeper in the pocket. 154-CM blade is hollow-ground with aggressive The lock functions as a frame-lock but a G-10 scale Leaf blades are broad and fl at-ground stainless clip. Piped lanyard. Symphonic fi t and fi nish. temperatures expelling most of the non- traction and slip-resistant grip. the spine with a swedge-grind for Spyderco line-up. We lengthened the blade’s tip and added thumb serrations (jimping) above a super-sized overlaying the lock looks very LinerLockish. The from edge to spine. Requests for a carbon atoms. We call this carbonization and Dual skeletonized stainless balance and reduced weight. Black more surface jimping. A larger lanyard 14mm Spyderco Round Hole. Full-length black G-10 handle scales are milled with corrugated super-sized Leaf keep coming and in it leaves a fi ber of tightly inter-locked chains of liners elevate sturdiness G-10 handle has a Walker LinerLock, hole for a broader variety of attachment internal liners are scalloped around the edges, creases for skid-free and ergonomic handling. Its response, our SuperLeaf fulfi lls with carbon atoms when laminated into sheets, the and rigidity without adding four-way silhouette pocket clip and options. Implementation of our new extending slightly beyond the G-10 handle scales CPM-S30V steel blade is a modifi ed-Wharncliffe profi le a full fat-ground VG-10 PlainEdge resulting material is perfect for hard, lightweight weight and double as an piped lanyard hole. Bushing Pivot System generates fl uid adding jimping to a large portion of the handle’s with a fi nger choil, spine jimping and a tapered swedge. blade. A large expansion at the back and wear-resistance knife handles. Conventional anchor for attaching external/ Screw together construction. Left/right deep-carry carbon fi ber is woven horizontally and vertically in internal components. Blades action and more consistent manufacturing perimeter. Three-screw clip is left/right-hand of the black G-10 handle provides tolerances. Refi nements to the overall friendly and positions the folder tip-up when carried. pocket clip and lanyard hole open the door for endless better control and grip while pulling a basket pattern, but Japanese makers have devised are full fl at-ground VG-10 attachment options. a weaving method making circular and swirled with a thin cutting edge and construction from the G-10 textured handle and cutting and a hard-use rated to the CPM-S30V steel full-fl at blade shout Compression Lock® keeps it safely fi ber patterns. The result is revolutionary. Add to 13mm Spyderco Round Hole. this new technology is a VG-10 fl at-ground blade, Phosphor bronze washers. sharper performance and comfort. locked open. Left/right tip-up wire ® Walker LinerLock and right hand pocket clip. Four-way clip: tip-up/tip-down, Compression Lock . clip. left/right-hand.

C11F SPECS C10F SPECS C81-2 SPECS C101BK SPECS C135 SPECS C139 SPECS C140 SPECS C141 SPECS C142 SPECS C65CF SPECS Steel: VG-10 Steel: VG-10 Steel: CPM-S30V Steel: 154-CM Steel: CPM-S30V Steel: VG-10 Steel: VG-10 Steel: VG-10 Steel: 8Cr3MoV Steel: VG-10 C11 Weight: 2.3oz (64g) Weight: 3.4oz (96g) C81-2 Weight: 3.7oz (107g) C101BK Weight: 5oz (143g) C135 Weight: 5.3oz (150g) C139 Weight: 4.5oz (127g) C140 Weight: 4.7oz (140g) C141 Weight: 1.3oz (37g) C142 Weight: 5.4oz (154g) C65CF Weight: 3.0oz (86g) Edge: P Edge: P Edge: P/PS/S Edge: P Edge: P Edge: P Edge: P Edge: P Edge: P Edge: P Country of Origin: Japan Country of Origin: Japan Country of Origin: U.S.A. Country of Origin: U.S.A. Country of Origin: Taiwan Country of Origin: Japan Country of Origin: Japan Country of Origin: Japan Country of Origin: China Country of Origin: Japan C10 Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Right Tip Carry: Up/Down Tip Carry: Up/Down Tip Carry: Up/Down Tip Carry: Up Tip Carry: Up Tip Carry: Up/Down Tip Carry: Up Tip Carry: Up/Down Tip Carry: Up/Down Tip Carry: Up/Down

MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: 7 1/8in. (181mm) 8 3/4in. (222mm) 8 9/32in. (210mm) 8in. (203mm) 7 3/8 in. (187mm) 7 7/8in. (199mm) 7 15/16in. (202mm) 4 7/16in. /113mm 9 3/8in. (238mm) 7 3/16in. (183mm)

Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: 4 1/4in. (108mm) 5in. (127mm) 4 13/16in. (122mm) 4 5/8in. (117mm) 4 1/4in. (108mm) 4 7/16in. (113mm) 4 11/16in. (119mm) 2 5/8in. (67mm) 5 1/4in. (133mm) 4 1/4in. (108mm)

Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: 2 9/16in. (65mm) 3 7/16in. (88mm) 3 5/64in. (78mm) 2 7/8in. (73mm) 2 11/16in. (68mm) 2 15/16in. (75mm) 2 13/16 in. (71mm) 1 1/4in. (32mm) 4 1/4in. (108mm) 2 7/8in. (73mm)

Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: 2 7/8in. (73mm) 3 3/4in. (96mm) 3 7/16in. (87mm) 3 3/8in. (86mm) 3 5/32in. (80mm) 3 3/8in. (86mm) 3 7/16in. (87mm) 1 15/16in. (49mm) 4 1/4in. (108mm) 3 5/32in. (80mm)

1 2 3 4 5 6 7 8 9 10 CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS

C139 JASON BREEDEN RESCUE C142 Knifemaker Bob Lum RESILIENCE died in 2007 but his knife Can a fl edgling Knifemaker’s style be established designs remain timeless. after just two knives? Jason Breeden’s has. Spyderco’s collection of His legacy Chinese Folder C135 PERRIN PPT Value Folders, bears the name is artistry in knifemaking, C10F C81-2 PARA-MILITARY2 He earned distinction as the knife designer who creates odd-shaped blades with his fi rst of admirable human true to Asian knives in ENDURA characteristics. Our economical its purity, simplicity and Why change something C101BK MANIX2 Fred Perrin doesn’t sit still, fi guratively Spyderco collaboration, the Captain. Critics Persistence is smallest, the function. Share the word; C11F if it works? Because we or physically. He’s perpetually in changed their tune after using the Captain C141 BALANCE Tenacious is mid-sized, and our we’re unveiling two new Lum practice the principle of BLACK BLADE motion, like a bullet-train picking up and experiencing its pure functionality, and DELICA new Resilience the largest. All meet Chinese folders. C.Q.I. - Constant Quality speed, as evidenced by his resume. dismissing its quirky appearance Balance is a state of equilibrium or equal as inconsequential. His and exceed our goal, of providing with full-fl at Improvement. If we can The Manix2 has been well received Fred has been a world-vetted tae kwon distribution. In our case it’s an Ed Schempp ground blade & second collaboration, the a level of cutting performance and improve it, refi ne it, upgrade since its 2010 release. An all-black do and stick-fi ghting champion, a folder that is symmetrical on each end when colored handles Spyderco/Breeden Rescue, is construction at a price-point that ergos or enhance cutting version arrives Summer 2010 with French Army Commando, a professional closed. Odd looks aside, when in the hand it’s equally unconventional. Like makes you say “hmm”? The C142 C65CF LUM performance, we do it. Our DLC (diamond-like coating) black blade, writer, a martial arts instructor and one ergonomically proportional and a natural fi t. The Classic Endura4 and all Breeden designs, it refl ects combines the very best Spyderco 2010 Para-Military2 has several black screws and black silhouette pocket of France’s most recognized professional VG-10 blade rears up in a radical curve with a deep CHINESE FOLDER Delica4 Lightweights Jason’s hard-use outdoor features: a 4-way Clip, screw- together changes. We’ve narrowed the clip. It features the Ball Bearing Lock® knifemakers and he’s only in his forties. fi nger choil. When the index fi nger sits in the choil, are now available in experiences in the Appalachian construction, phosphor bronze bushings, handle for better ergonomics. which consists of a hardened free-fl oating The latest product of his alliance with the blade feels like an extension of your hand. The NISHIGUN blue, green, brown, gray Mountains. A Sheepfoot- skeletonized steel liners, an enlarged The (closed) blade profi le is ball bearing contained in a custom hi-tech Spyderco is the Perrin PPT folder. P.P.T. refers enlarged Spyderco Round Hole is dead center on the and purple with full-fl at looking VG-10 blade is hollow- C140 SUPERLEAF opening hole, and spine and liner jimping CARBON FIBER now streamlined, eliminating any polymer cage. The round ball bearing allows to folder’s three designers; Fred Perrin, Philippe blade when closed and perfectly off-centered when ground blades. Injection ground, focusing strength on the with a fl at-ground blade 8Cr13MoV angles to catch or rub in a pocket. the lock to self adjust across a large surface, Perotti and Sacha Thiel. The lock is a crossbreed, Spyderco is often associated with leaf- open, positioning the thumb for smooth one-hand use. Carbon fi ber manufacturing is part molded FRN handles have tip of the blade where a knife sees blade. Feature-for-feature, dollar-for-dollar, Ambidextrously friendly four-way clip smoothly and consistently locking-up with blending elements of both Michael Walker’s shaped blades. They’re a time tested Carbon fi ber handle. Screw together construction. chemical, part mechanical. Carbon strands Bi-Directional Texturing® the greatest use (think, digging performance-for-performance the Resilience carries tip-up/tip-down, left/right- solid confi dence. Matte black non-refl ective LinerLock and Chris Reeve’s Reeve Integral Lock. design that shines in any application. Four way, left/right, tip-up/tip-down hourglass are drawn into fi bers then heated to high covering both sides for tactile or prying). The blade is thinned at adds one more must-have, best buy to the hand and rests deeper in the pocket. 154-CM blade is hollow-ground with aggressive The lock functions as a frame-lock but a G-10 scale Leaf blades are broad and fl at-ground stainless clip. Piped lanyard. Symphonic fi t and fi nish. temperatures expelling most of the non- traction and slip-resistant grip. the spine with a swedge-grind for Spyderco line-up. We lengthened the blade’s tip and added thumb serrations (jimping) above a super-sized overlaying the lock looks very LinerLockish. The from edge to spine. Requests for a carbon atoms. We call this carbonization and Dual skeletonized stainless balance and reduced weight. Black more surface jimping. A larger lanyard 14mm Spyderco Round Hole. Full-length black G-10 handle scales are milled with corrugated super-sized Leaf keep coming and in it leaves a fi ber of tightly inter-locked chains of liners elevate sturdiness G-10 handle has a Walker LinerLock, hole for a broader variety of attachment internal liners are scalloped around the edges, creases for skid-free and ergonomic handling. Its response, our SuperLeaf fulfi lls with carbon atoms when laminated into sheets, the and rigidity without adding four-way silhouette pocket clip and options. Implementation of our new extending slightly beyond the G-10 handle scales CPM-S30V steel blade is a modifi ed-Wharncliffe profi le a full fat-ground VG-10 PlainEdge resulting material is perfect for hard, lightweight weight and double as an piped lanyard hole. Bushing Pivot System generates fl uid adding jimping to a large portion of the handle’s with a fi nger choil, spine jimping and a tapered swedge. blade. A large expansion at the back and wear-resistance knife handles. Conventional anchor for attaching external/ Screw together construction. Left/right deep-carry carbon fi ber is woven horizontally and vertically in internal components. Blades action and more consistent manufacturing perimeter. Three-screw clip is left/right-hand of the black G-10 handle provides tolerances. Refi nements to the overall friendly and positions the folder tip-up when carried. pocket clip and lanyard hole open the door for endless better control and grip while pulling a basket pattern, but Japanese makers have devised are full fl at-ground VG-10 attachment options. a weaving method making circular and swirled with a thin cutting edge and construction from the G-10 textured handle and cutting and a hard-use rated to the CPM-S30V steel full-fl at blade shout Compression Lock® keeps it safely fi ber patterns. The result is revolutionary. Add to 13mm Spyderco Round Hole. this new technology is a VG-10 fl at-ground blade, Phosphor bronze washers. sharper performance and comfort. locked open. Left/right tip-up wire ® Walker LinerLock and right hand pocket clip. Four-way clip: tip-up/tip-down, Compression Lock . clip. left/right-hand.

C11F SPECS C10F SPECS C81-2 SPECS C101BK SPECS C135 SPECS C139 SPECS C140 SPECS C141 SPECS C142 SPECS C65CF SPECS Steel: VG-10 Steel: VG-10 Steel: CPM-S30V Steel: 154-CM Steel: CPM-S30V Steel: VG-10 Steel: VG-10 Steel: VG-10 Steel: 8Cr3MoV Steel: VG-10 C11 Weight: 2.3oz (64g) Weight: 3.4oz (96g) C81-2 Weight: 3.7oz (107g) C101BK Weight: 5oz (143g) C135 Weight: 5.3oz (150g) C139 Weight: 4.5oz (127g) C140 Weight: 4.7oz (140g) C141 Weight: 1.3oz (37g) C142 Weight: 5.4oz (154g) C65CF Weight: 3.0oz (86g) Edge: P Edge: P Edge: P/PS/S Edge: P Edge: P Edge: P Edge: P Edge: P Edge: P Edge: P Country of Origin: Japan Country of Origin: Japan Country of Origin: U.S.A. Country of Origin: U.S.A. Country of Origin: Taiwan Country of Origin: Japan Country of Origin: Japan Country of Origin: Japan Country of Origin: China Country of Origin: Japan C10 Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Right Tip Carry: Up/Down Tip Carry: Up/Down Tip Carry: Up/Down Tip Carry: Up Tip Carry: Up Tip Carry: Up/Down Tip Carry: Up Tip Carry: Up/Down Tip Carry: Up/Down Tip Carry: Up/Down

MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: 7 1/8in. (181mm) 8 3/4in. (222mm) 8 9/32in. (210mm) 8in. (203mm) 7 3/8 in. (187mm) 7 7/8in. (199mm) 7 15/16in. (202mm) 4 7/16in. /113mm 9 3/8in. (238mm) 7 3/16in. (183mm)

Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: 4 1/4in. (108mm) 5in. (127mm) 4 13/16in. (122mm) 4 5/8in. (117mm) 4 1/4in. (108mm) 4 7/16in. (113mm) 4 11/16in. (119mm) 2 5/8in. (67mm) 5 1/4in. (133mm) 4 1/4in. (108mm)

Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: 2 9/16in. (65mm) 3 7/16in. (88mm) 3 5/64in. (78mm) 2 7/8in. (73mm) 2 11/16in. (68mm) 2 15/16in. (75mm) 2 13/16 in. (71mm) 1 1/4in. (32mm) 4 1/4in. (108mm) 2 7/8in. (73mm)

Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: 2 7/8in. (73mm) 3 3/4in. (96mm) 3 7/16in. (87mm) 3 3/8in. (86mm) 3 5/32in. (80mm) 3 3/8in. (86mm) 3 7/16in. (87mm) 1 15/16in. (49mm) 4 1/4in. (108mm) 3 5/32in. (80mm)

1 2 3 4 5 6 7 8 9 10 CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS

C139 JASON BREEDEN RESCUE C142 Knifemaker Bob Lum RESILIENCE died in 2007 but his knife Can a fl edgling Knifemaker’s style be established designs remain timeless. after just two knives? Jason Breeden’s has. Spyderco’s collection of His legacy Chinese Folder C135 PERRIN PPT Value Folders, bears the name is artistry in knifemaking, C10F C81-2 PARA-MILITARY2 He earned distinction as the knife designer who creates odd-shaped blades with his fi rst of admirable human true to Asian knives in ENDURA characteristics. Our economical its purity, simplicity and Why change something C101BK MANIX2 Fred Perrin doesn’t sit still, fi guratively Spyderco collaboration, the Captain. Critics Persistence is smallest, the function. Share the word; C11F if it works? Because we or physically. He’s perpetually in changed their tune after using the Captain C141 BALANCE Tenacious is mid-sized, and our we’re unveiling two new Lum practice the principle of BLACK BLADE motion, like a bullet-train picking up and experiencing its pure functionality, and DELICA new Resilience the largest. All meet Chinese folders. C.Q.I. - Constant Quality speed, as evidenced by his resume. dismissing its quirky appearance Balance is a state of equilibrium or equal as inconsequential. His and exceed our goal, of providing with full-fl at Improvement. If we can The Manix2 has been well received Fred has been a world-vetted tae kwon distribution. In our case it’s an Ed Schempp ground blade & second collaboration, the a level of cutting performance and improve it, refi ne it, upgrade since its 2010 release. An all-black do and stick-fi ghting champion, a folder that is symmetrical on each end when colored handles Spyderco/Breeden Rescue, is construction at a price-point that ergos or enhance cutting version arrives Summer 2010 with French Army Commando, a professional closed. Odd looks aside, when in the hand it’s equally unconventional. Like makes you say “hmm”? The C142 C65CF LUM performance, we do it. Our DLC (diamond-like coating) black blade, writer, a martial arts instructor and one ergonomically proportional and a natural fi t. The Classic Endura4 and all Breeden designs, it refl ects combines the very best Spyderco 2010 Para-Military2 has several black screws and black silhouette pocket of France’s most recognized professional VG-10 blade rears up in a radical curve with a deep CHINESE FOLDER Delica4 Lightweights Jason’s hard-use outdoor features: a 4-way Clip, screw- together changes. We’ve narrowed the clip. It features the Ball Bearing Lock® knifemakers and he’s only in his forties. fi nger choil. When the index fi nger sits in the choil, are now available in experiences in the Appalachian construction, phosphor bronze bushings, handle for better ergonomics. which consists of a hardened free-fl oating The latest product of his alliance with the blade feels like an extension of your hand. The NISHIGUN blue, green, brown, gray Mountains. A Sheepfoot- skeletonized steel liners, an enlarged The (closed) blade profi le is ball bearing contained in a custom hi-tech Spyderco is the Perrin PPT folder. P.P.T. refers enlarged Spyderco Round Hole is dead center on the and purple with full-fl at looking VG-10 blade is hollow- C140 SUPERLEAF opening hole, and spine and liner jimping CARBON FIBER now streamlined, eliminating any polymer cage. The round ball bearing allows to folder’s three designers; Fred Perrin, Philippe blade when closed and perfectly off-centered when ground blades. Injection ground, focusing strength on the with a fl at-ground blade 8Cr13MoV angles to catch or rub in a pocket. the lock to self adjust across a large surface, Perotti and Sacha Thiel. The lock is a crossbreed, Spyderco is often associated with leaf- open, positioning the thumb for smooth one-hand use. Carbon fi ber manufacturing is part molded FRN handles have tip of the blade where a knife sees blade. Feature-for-feature, dollar-for-dollar, Ambidextrously friendly four-way clip smoothly and consistently locking-up with blending elements of both Michael Walker’s shaped blades. They’re a time tested Carbon fi ber handle. Screw together construction. chemical, part mechanical. Carbon strands Bi-Directional Texturing® the greatest use (think, digging performance-for-performance the Resilience carries tip-up/tip-down, left/right- solid confi dence. Matte black non-refl ective LinerLock and Chris Reeve’s Reeve Integral Lock. design that shines in any application. Four way, left/right, tip-up/tip-down hourglass are drawn into fi bers then heated to high covering both sides for tactile or prying). The blade is thinned at adds one more must-have, best buy to the hand and rests deeper in the pocket. 154-CM blade is hollow-ground with aggressive The lock functions as a frame-lock but a G-10 scale Leaf blades are broad and fl at-ground stainless clip. Piped lanyard. Symphonic fi t and fi nish. temperatures expelling most of the non- traction and slip-resistant grip. the spine with a swedge-grind for Spyderco line-up. We lengthened the blade’s tip and added thumb serrations (jimping) above a super-sized overlaying the lock looks very LinerLockish. The from edge to spine. Requests for a carbon atoms. We call this carbonization and Dual skeletonized stainless balance and reduced weight. Black more surface jimping. A larger lanyard 14mm Spyderco Round Hole. Full-length black G-10 handle scales are milled with corrugated super-sized Leaf keep coming and in it leaves a fi ber of tightly inter-locked chains of liners elevate sturdiness G-10 handle has a Walker LinerLock, hole for a broader variety of attachment internal liners are scalloped around the edges, creases for skid-free and ergonomic handling. Its response, our SuperLeaf fulfi lls with carbon atoms when laminated into sheets, the and rigidity without adding four-way silhouette pocket clip and options. Implementation of our new extending slightly beyond the G-10 handle scales CPM-S30V steel blade is a modifi ed-Wharncliffe profi le a full fat-ground VG-10 PlainEdge resulting material is perfect for hard, lightweight weight and double as an piped lanyard hole. Bushing Pivot System generates fl uid adding jimping to a large portion of the handle’s with a fi nger choil, spine jimping and a tapered swedge. blade. A large expansion at the back and wear-resistance knife handles. Conventional anchor for attaching external/ Screw together construction. Left/right deep-carry carbon fi ber is woven horizontally and vertically in internal components. Blades action and more consistent manufacturing perimeter. Three-screw clip is left/right-hand of the black G-10 handle provides tolerances. Refi nements to the overall friendly and positions the folder tip-up when carried. pocket clip and lanyard hole open the door for endless better control and grip while pulling a basket pattern, but Japanese makers have devised are full fl at-ground VG-10 attachment options. a weaving method making circular and swirled with a thin cutting edge and construction from the G-10 textured handle and cutting and a hard-use rated to the CPM-S30V steel full-fl at blade shout Compression Lock® keeps it safely fi ber patterns. The result is revolutionary. Add to 13mm Spyderco Round Hole. this new technology is a VG-10 fl at-ground blade, Phosphor bronze washers. sharper performance and comfort. locked open. Left/right tip-up wire ® Walker LinerLock and right hand pocket clip. Four-way clip: tip-up/tip-down, Compression Lock . clip. left/right-hand.

C11F SPECS C10F SPECS C81-2 SPECS C101BK SPECS C135 SPECS C139 SPECS C140 SPECS C141 SPECS C142 SPECS C65CF SPECS Steel: VG-10 Steel: VG-10 Steel: CPM-S30V Steel: 154-CM Steel: CPM-S30V Steel: VG-10 Steel: VG-10 Steel: VG-10 Steel: 8Cr3MoV Steel: VG-10 C11 Weight: 2.3oz (64g) Weight: 3.4oz (96g) C81-2 Weight: 3.7oz (107g) C101BK Weight: 5oz (143g) C135 Weight: 5.3oz (150g) C139 Weight: 4.5oz (127g) C140 Weight: 4.7oz (140g) C141 Weight: 1.3oz (37g) C142 Weight: 5.4oz (154g) C65CF Weight: 3.0oz (86g) Edge: P Edge: P Edge: P/PS/S Edge: P Edge: P Edge: P Edge: P Edge: P Edge: P Edge: P Country of Origin: Japan Country of Origin: Japan Country of Origin: U.S.A. Country of Origin: U.S.A. Country of Origin: Taiwan Country of Origin: Japan Country of Origin: Japan Country of Origin: Japan Country of Origin: China Country of Origin: Japan C10 Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Right Tip Carry: Up/Down Tip Carry: Up/Down Tip Carry: Up/Down Tip Carry: Up Tip Carry: Up Tip Carry: Up/Down Tip Carry: Up Tip Carry: Up/Down Tip Carry: Up/Down Tip Carry: Up/Down

MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: 7 1/8in. (181mm) 8 3/4in. (222mm) 8 9/32in. (210mm) 8in. (203mm) 7 3/8 in. (187mm) 7 7/8in. (199mm) 7 15/16in. (202mm) 4 7/16in. /113mm 9 3/8in. (238mm) 7 3/16in. (183mm)

Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: 4 1/4in. (108mm) 5in. (127mm) 4 13/16in. (122mm) 4 5/8in. (117mm) 4 1/4in. (108mm) 4 7/16in. (113mm) 4 11/16in. (119mm) 2 5/8in. (67mm) 5 1/4in. (133mm) 4 1/4in. (108mm)

Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: 2 9/16in. (65mm) 3 7/16in. (88mm) 3 5/64in. (78mm) 2 7/8in. (73mm) 2 11/16in. (68mm) 2 15/16in. (75mm) 2 13/16 in. (71mm) 1 1/4in. (32mm) 4 1/4in. (108mm) 2 7/8in. (73mm)

Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: 2 7/8in. (73mm) 3 3/4in. (96mm) 3 7/16in. (87mm) 3 3/8in. (86mm) 3 5/32in. (80mm) 3 3/8in. (86mm) 3 7/16in. (87mm) 1 15/16in. (49mm) 4 1/4in. (108mm) 3 5/32in. (80mm)

1 2 3 4 5 6 7 8 9 10 CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS

C139 JASON BREEDEN RESCUE C142 Knifemaker Bob Lum RESILIENCE died in 2007 but his knife Can a fl edgling Knifemaker’s style be established designs remain timeless. after just two knives? Jason Breeden’s has. Spyderco’s collection of His legacy Chinese Folder C135 PERRIN PPT Value Folders, bears the name is artistry in knifemaking, C10F C81-2 PARA-MILITARY2 He earned distinction as the knife designer who creates odd-shaped blades with his fi rst of admirable human true to Asian knives in ENDURA characteristics. Our economical its purity, simplicity and Why change something C101BK MANIX2 Fred Perrin doesn’t sit still, fi guratively Spyderco collaboration, the Captain. Critics Persistence is smallest, the function. Share the word; C11F if it works? Because we or physically. He’s perpetually in changed their tune after using the Captain C141 BALANCE Tenacious is mid-sized, and our we’re unveiling two new Lum practice the principle of BLACK BLADE motion, like a bullet-train picking up and experiencing its pure functionality, and DELICA new Resilience the largest. All meet Chinese folders. C.Q.I. - Constant Quality speed, as evidenced by his resume. dismissing its quirky appearance Balance is a state of equilibrium or equal as inconsequential. His and exceed our goal, of providing with full-fl at Improvement. If we can The Manix2 has been well received Fred has been a world-vetted tae kwon distribution. In our case it’s an Ed Schempp ground blade & second collaboration, the a level of cutting performance and improve it, refi ne it, upgrade since its 2010 release. An all-black do and stick-fi ghting champion, a folder that is symmetrical on each end when colored handles Spyderco/Breeden Rescue, is construction at a price-point that ergos or enhance cutting version arrives Summer 2010 with French Army Commando, a professional closed. Odd looks aside, when in the hand it’s equally unconventional. Like makes you say “hmm”? The C142 C65CF LUM performance, we do it. Our DLC (diamond-like coating) black blade, writer, a martial arts instructor and one ergonomically proportional and a natural fi t. The Classic Endura4 and all Breeden designs, it refl ects combines the very best Spyderco 2010 Para-Military2 has several black screws and black silhouette pocket of France’s most recognized professional VG-10 blade rears up in a radical curve with a deep CHINESE FOLDER Delica4 Lightweights Jason’s hard-use outdoor features: a 4-way Clip, screw- together changes. We’ve narrowed the clip. It features the Ball Bearing Lock® knifemakers and he’s only in his forties. fi nger choil. When the index fi nger sits in the choil, are now available in experiences in the Appalachian construction, phosphor bronze bushings, handle for better ergonomics. which consists of a hardened free-fl oating The latest product of his alliance with the blade feels like an extension of your hand. The NISHIGUN blue, green, brown, gray Mountains. A Sheepfoot- skeletonized steel liners, an enlarged The (closed) blade profi le is ball bearing contained in a custom hi-tech Spyderco is the Perrin PPT folder. P.P.T. refers enlarged Spyderco Round Hole is dead center on the and purple with full-fl at looking VG-10 blade is hollow- C140 SUPERLEAF opening hole, and spine and liner jimping CARBON FIBER now streamlined, eliminating any polymer cage. The round ball bearing allows to folder’s three designers; Fred Perrin, Philippe blade when closed and perfectly off-centered when ground blades. Injection ground, focusing strength on the with a fl at-ground blade 8Cr13MoV angles to catch or rub in a pocket. the lock to self adjust across a large surface, Perotti and Sacha Thiel. The lock is a crossbreed, Spyderco is often associated with leaf- open, positioning the thumb for smooth one-hand use. Carbon fi ber manufacturing is part molded FRN handles have tip of the blade where a knife sees blade. Feature-for-feature, dollar-for-dollar, Ambidextrously friendly four-way clip smoothly and consistently locking-up with blending elements of both Michael Walker’s shaped blades. They’re a time tested Carbon fi ber handle. Screw together construction. chemical, part mechanical. Carbon strands Bi-Directional Texturing® the greatest use (think, digging performance-for-performance the Resilience carries tip-up/tip-down, left/right- solid confi dence. Matte black non-refl ective LinerLock and Chris Reeve’s Reeve Integral Lock. design that shines in any application. Four way, left/right, tip-up/tip-down hourglass are drawn into fi bers then heated to high covering both sides for tactile or prying). The blade is thinned at adds one more must-have, best buy to the hand and rests deeper in the pocket. 154-CM blade is hollow-ground with aggressive The lock functions as a frame-lock but a G-10 scale Leaf blades are broad and fl at-ground stainless clip. Piped lanyard. Symphonic fi t and fi nish. temperatures expelling most of the non- traction and slip-resistant grip. the spine with a swedge-grind for Spyderco line-up. We lengthened the blade’s tip and added thumb serrations (jimping) above a super-sized overlaying the lock looks very LinerLockish. The from edge to spine. Requests for a carbon atoms. We call this carbonization and Dual skeletonized stainless balance and reduced weight. Black more surface jimping. A larger lanyard 14mm Spyderco Round Hole. Full-length black G-10 handle scales are milled with corrugated super-sized Leaf keep coming and in it leaves a fi ber of tightly inter-locked chains of liners elevate sturdiness G-10 handle has a Walker LinerLock, hole for a broader variety of attachment internal liners are scalloped around the edges, creases for skid-free and ergonomic handling. Its response, our SuperLeaf fulfi lls with carbon atoms when laminated into sheets, the and rigidity without adding four-way silhouette pocket clip and options. Implementation of our new extending slightly beyond the G-10 handle scales CPM-S30V steel blade is a modifi ed-Wharncliffe profi le a full fat-ground VG-10 PlainEdge resulting material is perfect for hard, lightweight weight and double as an piped lanyard hole. Bushing Pivot System generates fl uid adding jimping to a large portion of the handle’s with a fi nger choil, spine jimping and a tapered swedge. blade. A large expansion at the back and wear-resistance knife handles. Conventional anchor for attaching external/ Screw together construction. Left/right deep-carry carbon fi ber is woven horizontally and vertically in internal components. Blades action and more consistent manufacturing perimeter. Three-screw clip is left/right-hand of the black G-10 handle provides tolerances. Refi nements to the overall friendly and positions the folder tip-up when carried. pocket clip and lanyard hole open the door for endless better control and grip while pulling a basket pattern, but Japanese makers have devised are full fl at-ground VG-10 attachment options. a weaving method making circular and swirled with a thin cutting edge and construction from the G-10 textured handle and cutting and a hard-use rated to the CPM-S30V steel full-fl at blade shout Compression Lock® keeps it safely fi ber patterns. The result is revolutionary. Add to 13mm Spyderco Round Hole. this new technology is a VG-10 fl at-ground blade, Phosphor bronze washers. sharper performance and comfort. locked open. Left/right tip-up wire ® Walker LinerLock and right hand pocket clip. Four-way clip: tip-up/tip-down, Compression Lock . clip. left/right-hand.

C11F SPECS C10F SPECS C81-2 SPECS C101BK SPECS C135 SPECS C139 SPECS C140 SPECS C141 SPECS C142 SPECS C65CF SPECS Steel: VG-10 Steel: VG-10 Steel: CPM-S30V Steel: 154-CM Steel: CPM-S30V Steel: VG-10 Steel: VG-10 Steel: VG-10 Steel: 8Cr3MoV Steel: VG-10 C11 Weight: 2.3oz (64g) Weight: 3.4oz (96g) C81-2 Weight: 3.7oz (107g) C101BK Weight: 5oz (143g) C135 Weight: 5.3oz (150g) C139 Weight: 4.5oz (127g) C140 Weight: 4.7oz (140g) C141 Weight: 1.3oz (37g) C142 Weight: 5.4oz (154g) C65CF Weight: 3.0oz (86g) Edge: P Edge: P Edge: P/PS/S Edge: P Edge: P Edge: P Edge: P Edge: P Edge: P Edge: P Country of Origin: Japan Country of Origin: Japan Country of Origin: U.S.A. Country of Origin: U.S.A. Country of Origin: Taiwan Country of Origin: Japan Country of Origin: Japan Country of Origin: Japan Country of Origin: China Country of Origin: Japan C10 Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Right Tip Carry: Up/Down Tip Carry: Up/Down Tip Carry: Up/Down Tip Carry: Up Tip Carry: Up Tip Carry: Up/Down Tip Carry: Up Tip Carry: Up/Down Tip Carry: Up/Down Tip Carry: Up/Down

MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: 7 1/8in. (181mm) 8 3/4in. (222mm) 8 9/32in. (210mm) 8in. (203mm) 7 3/8 in. (187mm) 7 7/8in. (199mm) 7 15/16in. (202mm) 4 7/16in. /113mm 9 3/8in. (238mm) 7 3/16in. (183mm)

Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: 4 1/4in. (108mm) 5in. (127mm) 4 13/16in. (122mm) 4 5/8in. (117mm) 4 1/4in. (108mm) 4 7/16in. (113mm) 4 11/16in. (119mm) 2 5/8in. (67mm) 5 1/4in. (133mm) 4 1/4in. (108mm)

Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: 2 9/16in. (65mm) 3 7/16in. (88mm) 3 5/64in. (78mm) 2 7/8in. (73mm) 2 11/16in. (68mm) 2 15/16in. (75mm) 2 13/16 in. (71mm) 1 1/4in. (32mm) 4 1/4in. (108mm) 2 7/8in. (73mm)

Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: 2 7/8in. (73mm) 3 3/4in. (96mm) 3 7/16in. (87mm) 3 3/8in. (86mm) 3 5/32in. (80mm) 3 3/8in. (86mm) 3 7/16in. (87mm) 1 15/16in. (49mm) 4 1/4in. (108mm) 3 5/32in. (80mm)

1 2 3 4 5 6 7 8 9 10 CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS CLIPITS

C139 JASON BREEDEN RESCUE C142 Knifemaker Bob Lum RESILIENCE died in 2007 but his knife Can a fl edgling Knifemaker’s style be established designs remain timeless. after just two knives? Jason Breeden’s has. Spyderco’s collection of His legacy Chinese Folder C135 PERRIN PPT Value Folders, bears the name is artistry in knifemaking, C10F C81-2 PARA-MILITARY2 He earned distinction as the knife designer who creates odd-shaped blades with his fi rst of admirable human true to Asian knives in ENDURA characteristics. Our economical its purity, simplicity and Why change something C101BK MANIX2 Fred Perrin doesn’t sit still, fi guratively Spyderco collaboration, the Captain. Critics Persistence is smallest, the function. Share the word; C11F if it works? Because we or physically. He’s perpetually in changed their tune after using the Captain C141 BALANCE Tenacious is mid-sized, and our we’re unveiling two new Lum practice the principle of BLACK BLADE motion, like a bullet-train picking up and experiencing its pure functionality, and DELICA new Resilience the largest. All meet Chinese folders. C.Q.I. - Constant Quality speed, as evidenced by his resume. dismissing its quirky appearance Balance is a state of equilibrium or equal as inconsequential. His and exceed our goal, of providing with full-fl at Improvement. If we can The Manix2 has been well received Fred has been a world-vetted tae kwon distribution. In our case it’s an Ed Schempp ground blade & second collaboration, the a level of cutting performance and improve it, refi ne it, upgrade since its 2010 release. An all-black do and stick-fi ghting champion, a folder that is symmetrical on each end when colored handles Spyderco/Breeden Rescue, is construction at a price-point that ergos or enhance cutting version arrives Summer 2010 with French Army Commando, a professional closed. Odd looks aside, when in the hand it’s equally unconventional. Like makes you say “hmm”? The C142 C65CF LUM performance, we do it. Our DLC (diamond-like coating) black blade, writer, a martial arts instructor and one ergonomically proportional and a natural fi t. The Classic Endura4 and all Breeden designs, it refl ects combines the very best Spyderco 2010 Para-Military2 has several black screws and black silhouette pocket of France’s most recognized professional VG-10 blade rears up in a radical curve with a deep CHINESE FOLDER Delica4 Lightweights Jason’s hard-use outdoor features: a 4-way Clip, screw- together changes. We’ve narrowed the clip. It features the Ball Bearing Lock® knifemakers and he’s only in his forties. fi nger choil. When the index fi nger sits in the choil, are now available in experiences in the Appalachian construction, phosphor bronze bushings, handle for better ergonomics. which consists of a hardened free-fl oating The latest product of his alliance with the blade feels like an extension of your hand. The NISHIGUN blue, green, brown, gray Mountains. A Sheepfoot- skeletonized steel liners, an enlarged The (closed) blade profi le is ball bearing contained in a custom hi-tech Spyderco is the Perrin PPT folder. P.P.T. refers enlarged Spyderco Round Hole is dead center on the and purple with full-fl at looking VG-10 blade is hollow- C140 SUPERLEAF opening hole, and spine and liner jimping CARBON FIBER now streamlined, eliminating any polymer cage. The round ball bearing allows to folder’s three designers; Fred Perrin, Philippe blade when closed and perfectly off-centered when ground blades. Injection ground, focusing strength on the with a fl at-ground blade 8Cr13MoV angles to catch or rub in a pocket. the lock to self adjust across a large surface, Perotti and Sacha Thiel. The lock is a crossbreed, Spyderco is often associated with leaf- open, positioning the thumb for smooth one-hand use. Carbon fi ber manufacturing is part molded FRN handles have tip of the blade where a knife sees blade. Feature-for-feature, dollar-for-dollar, Ambidextrously friendly four-way clip smoothly and consistently locking-up with blending elements of both Michael Walker’s shaped blades. They’re a time tested Carbon fi ber handle. Screw together construction. chemical, part mechanical. Carbon strands Bi-Directional Texturing® the greatest use (think, digging performance-for-performance the Resilience carries tip-up/tip-down, left/right- solid confi dence. Matte black non-refl ective LinerLock and Chris Reeve’s Reeve Integral Lock. design that shines in any application. Four way, left/right, tip-up/tip-down hourglass are drawn into fi bers then heated to high covering both sides for tactile or prying). The blade is thinned at adds one more must-have, best buy to the hand and rests deeper in the pocket. 154-CM blade is hollow-ground with aggressive The lock functions as a frame-lock but a G-10 scale Leaf blades are broad and fl at-ground stainless clip. Piped lanyard. Symphonic fi t and fi nish. temperatures expelling most of the non- traction and slip-resistant grip. the spine with a swedge-grind for Spyderco line-up. We lengthened the blade’s tip and added thumb serrations (jimping) above a super-sized overlaying the lock looks very LinerLockish. The from edge to spine. Requests for a carbon atoms. We call this carbonization and Dual skeletonized stainless balance and reduced weight. Black more surface jimping. A larger lanyard 14mm Spyderco Round Hole. Full-length black G-10 handle scales are milled with corrugated super-sized Leaf keep coming and in it leaves a fi ber of tightly inter-locked chains of liners elevate sturdiness G-10 handle has a Walker LinerLock, hole for a broader variety of attachment internal liners are scalloped around the edges, creases for skid-free and ergonomic handling. Its response, our SuperLeaf fulfi lls with carbon atoms when laminated into sheets, the and rigidity without adding four-way silhouette pocket clip and options. Implementation of our new extending slightly beyond the G-10 handle scales CPM-S30V steel blade is a modifi ed-Wharncliffe profi le a full fat-ground VG-10 PlainEdge resulting material is perfect for hard, lightweight weight and double as an piped lanyard hole. Bushing Pivot System generates fl uid adding jimping to a large portion of the handle’s with a fi nger choil, spine jimping and a tapered swedge. blade. A large expansion at the back and wear-resistance knife handles. Conventional anchor for attaching external/ Screw together construction. Left/right deep-carry carbon fi ber is woven horizontally and vertically in internal components. Blades action and more consistent manufacturing perimeter. Three-screw clip is left/right-hand of the black G-10 handle provides tolerances. Refi nements to the overall friendly and positions the folder tip-up when carried. pocket clip and lanyard hole open the door for endless better control and grip while pulling a basket pattern, but Japanese makers have devised are full fl at-ground VG-10 attachment options. a weaving method making circular and swirled with a thin cutting edge and construction from the G-10 textured handle and cutting and a hard-use rated to the CPM-S30V steel full-fl at blade shout Compression Lock® keeps it safely fi ber patterns. The result is revolutionary. Add to 13mm Spyderco Round Hole. this new technology is a VG-10 fl at-ground blade, Phosphor bronze washers. sharper performance and comfort. locked open. Left/right tip-up wire ® Walker LinerLock and right hand pocket clip. Four-way clip: tip-up/tip-down, Compression Lock . clip. left/right-hand.

C11F SPECS C10F SPECS C81-2 SPECS C101BK SPECS C135 SPECS C139 SPECS C140 SPECS C141 SPECS C142 SPECS C65CF SPECS Steel: VG-10 Steel: VG-10 Steel: CPM-S30V Steel: 154-CM Steel: CPM-S30V Steel: VG-10 Steel: VG-10 Steel: VG-10 Steel: 8Cr3MoV Steel: VG-10 C11 Weight: 2.3oz (64g) Weight: 3.4oz (96g) C81-2 Weight: 3.7oz (107g) C101BK Weight: 5oz (143g) C135 Weight: 5.3oz (150g) C139 Weight: 4.5oz (127g) C140 Weight: 4.7oz (140g) C141 Weight: 1.3oz (37g) C142 Weight: 5.4oz (154g) C65CF Weight: 3.0oz (86g) Edge: P Edge: P Edge: P/PS/S Edge: P Edge: P Edge: P Edge: P Edge: P Edge: P Edge: P Country of Origin: Japan Country of Origin: Japan Country of Origin: U.S.A. Country of Origin: U.S.A. Country of Origin: Taiwan Country of Origin: Japan Country of Origin: Japan Country of Origin: Japan Country of Origin: China Country of Origin: Japan C10 Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Right Tip Carry: Up/Down Tip Carry: Up/Down Tip Carry: Up/Down Tip Carry: Up Tip Carry: Up Tip Carry: Up/Down Tip Carry: Up Tip Carry: Up/Down Tip Carry: Up/Down Tip Carry: Up/Down

MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: 7 1/8in. (181mm) 8 3/4in. (222mm) 8 9/32in. (210mm) 8in. (203mm) 7 3/8 in. (187mm) 7 7/8in. (199mm) 7 15/16in. (202mm) 4 7/16in. /113mm 9 3/8in. (238mm) 7 3/16in. (183mm)

Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: 4 1/4in. (108mm) 5in. (127mm) 4 13/16in. (122mm) 4 5/8in. (117mm) 4 1/4in. (108mm) 4 7/16in. (113mm) 4 11/16in. (119mm) 2 5/8in. (67mm) 5 1/4in. (133mm) 4 1/4in. (108mm)

Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: 2 9/16in. (65mm) 3 7/16in. (88mm) 3 5/64in. (78mm) 2 7/8in. (73mm) 2 11/16in. (68mm) 2 15/16in. (75mm) 2 13/16 in. (71mm) 1 1/4in. (32mm) 4 1/4in. (108mm) 2 7/8in. (73mm)

Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: 2 7/8in. (73mm) 3 3/4in. (96mm) 3 7/16in. (87mm) 3 3/8in. (86mm) 3 5/32in. (80mm) 3 3/8in. (86mm) 3 7/16in. (87mm) 1 15/16in. (49mm) 4 1/4in. (108mm) 3 5/32in. (80mm)

1 2 3 4 5 6 7 8 9 10 CLIPITS SLIPITS SLIPITS SLIPITS ACCESSORIES BYRD BYRD BYRD

C94CF BY04BK-2 UK PenKnife with carbon fi ber MEADOWLARK2 MOL1 MOLLE ADAPTER PLATE handle and CPM-S30V blade. The LIGHTWEIGHT Urban Professional among SLIPITS. MOLLE (Modular Lightweight Load-carrying Equipment) is the current UPGRADE ALERT!! system of load-bearing equipment based on the Pouch Attachment The Meadowlark2’s 3-inch blade is full fl at • Made in Golden, Colorado Ladder System (PALS). Consisting of a grid of nylon webbing, it allows The byrd Knife Line will be the subject of several bright ground, perfectly proportioned for effi ciency • Ambidextrous deep-pocket the modular attachment of pouches and other equipment to achieve and fresh engineering refi nements in 2010. byrds will have improved and cutting power. Handle fl aunts new deeper tip-up wire clip customized and mission-specifi c confi gurations. ergonomics and full-fl at ground high-performance 8Cr13MoV blades. texturing in the fi berglass reinforced nylon (FRN) • Finger choil for even better retention. • Spine jimping Spyderco’s new MOLLE Adapter Plate is a complete kit of components • Full fl at-ground blade allowing end-users to quickly and easily mount their Spyderco sheath knives BY03-2 CARA CARA2 STAINLESS • Ambidextrous tip-up/tip-down clip to any MOLLE platform with a vertical (handle-up or handle-down) or • Spine and choil jimping horizontal orientation. The heart of the system is a Boltaron® adapter Next evolution of the Cara Cara2 • Skeletonized nested handle liners C94TI C138 GRASSHOPPER plate that is attached to the MOLLE with one or two MALICE® Clips has a fl at-ground blade and • Screw construction (included). Screws, washers, and Chicago screw posts are then used to chamfered stainless handle, • Phosphor bronze bushings UK PenKnife with lightweight mount the sheath of your Spyderco fi xed-blade knife sheath using the offering pure high-performance Micro-sized SLIPIT for smooth open/close action titanium handle and CPM-S30V blade. existing holes for the G-Clip or large Tek-Lok™. The adapter plate kit without a large price tag. GrassHoppers draw remarks • FRN Bi-Directional Notch joint has smoother action than comes with an optional Velcro® strap that can be used as a secondary like “how cute” (a benefi cial Textured handle™ a traditional slip joint and a deep retention device when secured around the handle of your knife. Includes • Ambidextrous tip-up/tip- perception in a knife-cautious • David Boye Dent fi nger choil. An Olympian among detailed instructions and hardware necessary to mount any Spyderco fi xed- down clip world) yet offer real-world BY03G-2 • Full fl at-ground blade SLIPITS. blade or knives with mounting holes compatible with the G-Clip or large or • Spine and choil jimping cutting profi ciency. Similar in • Country of Origin: China small Tek-Loks. • Phosphor bronze bushings C143 LARGE size to conventional penknives, CARA CARA2 G-10 • Made in Golden, Colorado for smooth open/close their discreet Cr3 blades are LUM FOLDER • Ambidextrous deep-pocket Country of Origin: U.S.A. action Revamped G-10 Cara Cara2 with a fl at-ground blade, just over two-inches long. Their tip-up wire clip 3” (76mm) x 6-3/8” (162mm) • David Boye Dent spine jimping and a David Boye Dent. 4-way clip. Bob Lum did something no one else has. blades are held open, not locked, • Finger choil 2.41oz (68.5g) • Full fl at-ground blade He created a genesis, fusing a traditional by resistant pressure at pivot • Spine jimping • Country of Origin: China • Ambidextrous tip-up/tip-down clip Chinese fi xed blade and its ancient essence area. GrassHopper handles are • Full fl at-ground blade • Spine and choil jimping with features found in modern folding chamfered for comfort without rigid • Skeletonized nested handle liners knives resulting in a knife that stuns with corners to dig or bite into a gripping • Screw construction historical beauty and cuts with modern hand. Lanyard-hole accommodates a • Phosphor bronze bushings for smooth open/close impeccability. The large Chinese Folder pendant-chain or keyring. action has a fl at-ground VG-10 blade. The handle • David Boye Dent is black peel-ply G-10 with a Walker • Full fl at-ground blade LinerLock and 4-way tip-up/tip-down, • Country of Origin: China left-right-hand pocket clip. Tradition turned into an ergonomic folder. C94CF

C143 SPECS C94TI SPECS C138 SPECS C94CF SPECS BY03-2 SPECS BY03G-2 SPECS BY04BK-2 SPECS Steel: VG-10 Steel: CPM-S30V Steel: Cr3 Steel: CPM-S30V -2 Steel: 8Cr13MoV G-2 Steel: 8Cr13MoV BK-2 Steel: 8Cr3MoV C143 Weight: 4.3oz (123g) C94Ti Weight: 3.6oz (102g) C138 Weight: 1.4oz (39g) Weight: 2.2oz (63g) BY03 Weight: 5.6oz (160g) BY03 Weight: 4.25oz (121g) BY04 Weight: 2.4oz (67g) Edge: P Why SLIPITS? Edge: P Edge: P Edge: P Edge: P /PS Edge: P Edge: P/PS Country of Origin: Japan Country of Origin: U.S.A. Country of Origin: China Country of Origin: U.S.A. Country of Origin: China Country of Origin: China Country of Origin: China Knife buyers can appreciate the traditional aspects of non-locking folders Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Tip Carry: Up/Down and often gravitate to this knife style because where they live/work Tip Carry: Up Tip Carry: Tip Carry: Tip Carry: Tip Carry: MEASUREMENTS Up Up/Down Up/Down Up/Down could have laws prohibiting carrying/using pocketknives that lock open. Overall Length-Open: MEASUREMENTS Spyderco perceived a gap between traditional slipjoints and today’s modern MEASUREMENTS 5 1/32in. (128mm) MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS Spyderco Knives Inc. 2010 Spyderco Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: 8 9/16in. (217mm) locking folders and created a line of knives called SLIPITS. SLIPITS are 6 15/16in. (175mm) Overall Length-Closed: 6 15/16in. (175mm) 8 1/2in. (216mm) 8 1/2in. (216mm) 6 13/16in. (173mm 820 Spyderco Way reliable, cosmopolitan non-locking folders which open one-handedly, have 2 3/4in. (70mm) Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Golden, Colorado 80403 Mid-Year Supplemental Catalog 5 1/32in. (128mm) a fi nger choil for comfort and safety and are conveniently accessible. Their 4 1/16in. (103mm) Cutting Edge Length: 4 1/16in. (103mm) 4 3/4in. (121mm) 4 3/4in. (121mm) 4 1/32in. /102mm blades are held open by a notched joint at the knife’s pivot that produces 2 1/16in. (52mm) Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: At Spyderco quality is not an accident. It’s the result 3 7/16in. (87mm) resistance functionally similar to traditional slip-joint penknives. SLIPITS 2 5/8in. (67mm) P: 303-279-8383 or 1-800-525-7770 Blade Length: 2 5/8in. (67mm) 3 3/16in. (81mm) 3 3/16in. (81mm) 2 3/8in. / 61mm of focused intention, earnest effort, intelligent are the synthesis of modern and traditional knife designs. 2 5/16in. (59mm) F: 303-278-2229 Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: direction and careful execution. The result is the 3 3/4in. (95mm) 2 15/16in. (74mm) 2 15/16in. (74mm) 3 3/4in. (95 mm) 3 3/4in. (95mm) 2 7/8in./ 73mm *Beginning summer of 2010 our Lightweight UK Penknives will have a sum of wise choices and doing everything possible [email protected] blade steel change from GIN-1 to new Carpenter BD-1. to make quality knives, where steel meets the task. www.spyderco.com www.byrdknife.com

11 12 13 14 15 16 17 18 CLIPITS SLIPITS SLIPITS SLIPITS ACCESSORIES BYRD BYRD BYRD

C94CF BY04BK-2 UK PenKnife with carbon fi ber MEADOWLARK2 MOL1 MOLLE ADAPTER PLATE handle and CPM-S30V blade. The LIGHTWEIGHT Urban Professional among SLIPITS. MOLLE (Modular Lightweight Load-carrying Equipment) is the current UPGRADE ALERT!! system of load-bearing equipment based on the Pouch Attachment The Meadowlark2’s 3-inch blade is full fl at • Made in Golden, Colorado Ladder System (PALS). Consisting of a grid of nylon webbing, it allows The byrd Knife Line will be the subject of several bright ground, perfectly proportioned for effi ciency • Ambidextrous deep-pocket the modular attachment of pouches and other equipment to achieve and fresh engineering refi nements in 2010. byrds will have improved and cutting power. Handle fl aunts new deeper tip-up wire clip customized and mission-specifi c confi gurations. ergonomics and full-fl at ground high-performance 8Cr13MoV blades. texturing in the fi berglass reinforced nylon (FRN) • Finger choil for even better retention. • Spine jimping Spyderco’s new MOLLE Adapter Plate is a complete kit of components • Full fl at-ground blade allowing end-users to quickly and easily mount their Spyderco sheath knives BY03-2 CARA CARA2 STAINLESS • Ambidextrous tip-up/tip-down clip to any MOLLE platform with a vertical (handle-up or handle-down) or • Spine and choil jimping horizontal orientation. The heart of the system is a Boltaron® adapter Next evolution of the Cara Cara2 • Skeletonized nested handle liners C94TI C138 GRASSHOPPER plate that is attached to the MOLLE with one or two MALICE® Clips has a fl at-ground blade and • Screw construction (included). Screws, washers, and Chicago screw posts are then used to chamfered stainless handle, • Phosphor bronze bushings UK PenKnife with lightweight mount the sheath of your Spyderco fi xed-blade knife sheath using the offering pure high-performance Micro-sized SLIPIT for smooth open/close action titanium handle and CPM-S30V blade. existing holes for the G-Clip or large Tek-Lok™. The adapter plate kit without a large price tag. GrassHoppers draw remarks • FRN Bi-Directional Notch joint has smoother action than comes with an optional Velcro® strap that can be used as a secondary like “how cute” (a benefi cial Textured handle™ a traditional slip joint and a deep retention device when secured around the handle of your knife. Includes • Ambidextrous tip-up/tip- perception in a knife-cautious • David Boye Dent fi nger choil. An Olympian among detailed instructions and hardware necessary to mount any Spyderco fi xed- down clip world) yet offer real-world BY03G-2 • Full fl at-ground blade SLIPITS. blade or knives with mounting holes compatible with the G-Clip or large or • Spine and choil jimping cutting profi ciency. Similar in • Country of Origin: China small Tek-Loks. • Phosphor bronze bushings C143 LARGE size to conventional penknives, CARA CARA2 G-10 • Made in Golden, Colorado for smooth open/close their discreet Cr3 blades are LUM FOLDER • Ambidextrous deep-pocket Country of Origin: U.S.A. action Revamped G-10 Cara Cara2 with a fl at-ground blade, just over two-inches long. Their tip-up wire clip 3” (76mm) x 6-3/8” (162mm) • David Boye Dent spine jimping and a David Boye Dent. 4-way clip. Bob Lum did something no one else has. blades are held open, not locked, • Finger choil 2.41oz (68.5g) • Full fl at-ground blade He created a genesis, fusing a traditional by resistant pressure at pivot • Spine jimping • Country of Origin: China • Ambidextrous tip-up/tip-down clip Chinese fi xed blade and its ancient essence area. GrassHopper handles are • Full fl at-ground blade • Spine and choil jimping with features found in modern folding chamfered for comfort without rigid • Skeletonized nested handle liners knives resulting in a knife that stuns with corners to dig or bite into a gripping • Screw construction historical beauty and cuts with modern hand. Lanyard-hole accommodates a • Phosphor bronze bushings for smooth open/close impeccability. The large Chinese Folder pendant-chain or keyring. action has a fl at-ground VG-10 blade. The handle • David Boye Dent is black peel-ply G-10 with a Walker • Full fl at-ground blade LinerLock and 4-way tip-up/tip-down, • Country of Origin: China left-right-hand pocket clip. Tradition turned into an ergonomic folder. C94CF

C143 SPECS C94TI SPECS C138 SPECS C94CF SPECS BY03-2 SPECS BY03G-2 SPECS BY04BK-2 SPECS Steel: VG-10 Steel: CPM-S30V Steel: Cr3 Steel: CPM-S30V -2 Steel: 8Cr13MoV G-2 Steel: 8Cr13MoV BK-2 Steel: 8Cr3MoV C143 Weight: 4.3oz (123g) C94Ti Weight: 3.6oz (102g) C138 Weight: 1.4oz (39g) Weight: 2.2oz (63g) BY03 Weight: 5.6oz (160g) BY03 Weight: 4.25oz (121g) BY04 Weight: 2.4oz (67g) Edge: P Why SLIPITS? Edge: P Edge: P Edge: P Edge: P /PS Edge: P Edge: P/PS Country of Origin: Japan Country of Origin: U.S.A. Country of Origin: China Country of Origin: U.S.A. Country of Origin: China Country of Origin: China Country of Origin: China Knife buyers can appreciate the traditional aspects of non-locking folders Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Tip Carry: Up/Down and often gravitate to this knife style because where they live/work Tip Carry: Up Tip Carry: Tip Carry: Tip Carry: Tip Carry: MEASUREMENTS Up Up/Down Up/Down Up/Down could have laws prohibiting carrying/using pocketknives that lock open. Overall Length-Open: MEASUREMENTS Spyderco perceived a gap between traditional slipjoints and today’s modern MEASUREMENTS 5 1/32in. (128mm) MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS Spyderco Knives Inc. 2010 Spyderco Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: 8 9/16in. (217mm) locking folders and created a line of knives called SLIPITS. SLIPITS are 6 15/16in. (175mm) Overall Length-Closed: 6 15/16in. (175mm) 8 1/2in. (216mm) 8 1/2in. (216mm) 6 13/16in. (173mm 820 Spyderco Way reliable, cosmopolitan non-locking folders which open one-handedly, have 2 3/4in. (70mm) Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Golden, Colorado 80403 Mid-Year Supplemental Catalog 5 1/32in. (128mm) a fi nger choil for comfort and safety and are conveniently accessible. Their 4 1/16in. (103mm) Cutting Edge Length: 4 1/16in. (103mm) 4 3/4in. (121mm) 4 3/4in. (121mm) 4 1/32in. /102mm blades are held open by a notched joint at the knife’s pivot that produces 2 1/16in. (52mm) Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: At Spyderco quality is not an accident. It’s the result 3 7/16in. (87mm) resistance functionally similar to traditional slip-joint penknives. SLIPITS 2 5/8in. (67mm) P: 303-279-8383 or 1-800-525-7770 Blade Length: 2 5/8in. (67mm) 3 3/16in. (81mm) 3 3/16in. (81mm) 2 3/8in. / 61mm of focused intention, earnest effort, intelligent are the synthesis of modern and traditional knife designs. 2 5/16in. (59mm) F: 303-278-2229 Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: direction and careful execution. The result is the 3 3/4in. (95mm) 2 15/16in. (74mm) 2 15/16in. (74mm) 3 3/4in. (95 mm) 3 3/4in. (95mm) 2 7/8in./ 73mm *Beginning summer of 2010 our Lightweight UK Penknives will have a sum of wise choices and doing everything possible [email protected] blade steel change from GIN-1 to new Carpenter BD-1. to make quality knives, where steel meets the task. www.spyderco.com www.byrdknife.com

11 12 13 14 15 16 17 18 CLIPITS SLIPITS SLIPITS SLIPITS ACCESSORIES BYRD BYRD BYRD

C94CF BY04BK-2 UK PenKnife with carbon fi ber MEADOWLARK2 MOL1 MOLLE ADAPTER PLATE handle and CPM-S30V blade. The LIGHTWEIGHT Urban Professional among SLIPITS. MOLLE (Modular Lightweight Load-carrying Equipment) is the current UPGRADE ALERT!! system of load-bearing equipment based on the Pouch Attachment The Meadowlark2’s 3-inch blade is full fl at • Made in Golden, Colorado Ladder System (PALS). Consisting of a grid of nylon webbing, it allows The byrd Knife Line will be the subject of several bright ground, perfectly proportioned for effi ciency • Ambidextrous deep-pocket the modular attachment of pouches and other equipment to achieve and fresh engineering refi nements in 2010. byrds will have improved and cutting power. Handle fl aunts new deeper tip-up wire clip customized and mission-specifi c confi gurations. ergonomics and full-fl at ground high-performance 8Cr13MoV blades. texturing in the fi berglass reinforced nylon (FRN) • Finger choil for even better retention. • Spine jimping Spyderco’s new MOLLE Adapter Plate is a complete kit of components • Full fl at-ground blade allowing end-users to quickly and easily mount their Spyderco sheath knives BY03-2 CARA CARA2 STAINLESS • Ambidextrous tip-up/tip-down clip to any MOLLE platform with a vertical (handle-up or handle-down) or • Spine and choil jimping horizontal orientation. The heart of the system is a Boltaron® adapter Next evolution of the Cara Cara2 • Skeletonized nested handle liners C94TI C138 GRASSHOPPER plate that is attached to the MOLLE with one or two MALICE® Clips has a fl at-ground blade and • Screw construction (included). Screws, washers, and Chicago screw posts are then used to chamfered stainless handle, • Phosphor bronze bushings UK PenKnife with lightweight mount the sheath of your Spyderco fi xed-blade knife sheath using the offering pure high-performance Micro-sized SLIPIT for smooth open/close action titanium handle and CPM-S30V blade. existing holes for the G-Clip or large Tek-Lok™. The adapter plate kit without a large price tag. GrassHoppers draw remarks • FRN Bi-Directional Notch joint has smoother action than comes with an optional Velcro® strap that can be used as a secondary like “how cute” (a benefi cial Textured handle™ a traditional slip joint and a deep retention device when secured around the handle of your knife. Includes • Ambidextrous tip-up/tip- perception in a knife-cautious • David Boye Dent fi nger choil. An Olympian among detailed instructions and hardware necessary to mount any Spyderco fi xed- down clip world) yet offer real-world BY03G-2 • Full fl at-ground blade SLIPITS. blade or knives with mounting holes compatible with the G-Clip or large or • Spine and choil jimping cutting profi ciency. Similar in • Country of Origin: China small Tek-Loks. • Phosphor bronze bushings C143 LARGE size to conventional penknives, CARA CARA2 G-10 • Made in Golden, Colorado for smooth open/close their discreet Cr3 blades are LUM FOLDER • Ambidextrous deep-pocket Country of Origin: U.S.A. action Revamped G-10 Cara Cara2 with a fl at-ground blade, just over two-inches long. Their tip-up wire clip 3” (76mm) x 6-3/8” (162mm) • David Boye Dent spine jimping and a David Boye Dent. 4-way clip. Bob Lum did something no one else has. blades are held open, not locked, • Finger choil 2.41oz (68.5g) • Full fl at-ground blade He created a genesis, fusing a traditional by resistant pressure at pivot • Spine jimping • Country of Origin: China • Ambidextrous tip-up/tip-down clip Chinese fi xed blade and its ancient essence area. GrassHopper handles are • Full fl at-ground blade • Spine and choil jimping with features found in modern folding chamfered for comfort without rigid • Skeletonized nested handle liners knives resulting in a knife that stuns with corners to dig or bite into a gripping • Screw construction historical beauty and cuts with modern hand. Lanyard-hole accommodates a • Phosphor bronze bushings for smooth open/close impeccability. The large Chinese Folder pendant-chain or keyring. action has a fl at-ground VG-10 blade. The handle • David Boye Dent is black peel-ply G-10 with a Walker • Full fl at-ground blade LinerLock and 4-way tip-up/tip-down, • Country of Origin: China left-right-hand pocket clip. Tradition turned into an ergonomic folder. C94CF

C143 SPECS C94TI SPECS C138 SPECS C94CF SPECS BY03-2 SPECS BY03G-2 SPECS BY04BK-2 SPECS Steel: VG-10 Steel: CPM-S30V Steel: Cr3 Steel: CPM-S30V -2 Steel: 8Cr13MoV G-2 Steel: 8Cr13MoV BK-2 Steel: 8Cr3MoV C143 Weight: 4.3oz (123g) C94Ti Weight: 3.6oz (102g) C138 Weight: 1.4oz (39g) Weight: 2.2oz (63g) BY03 Weight: 5.6oz (160g) BY03 Weight: 4.25oz (121g) BY04 Weight: 2.4oz (67g) Edge: P Why SLIPITS? Edge: P Edge: P Edge: P Edge: P /PS Edge: P Edge: P/PS Country of Origin: Japan Country of Origin: U.S.A. Country of Origin: China Country of Origin: U.S.A. Country of Origin: China Country of Origin: China Country of Origin: China Knife buyers can appreciate the traditional aspects of non-locking folders Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Tip Carry: and often gravitate to this knife style because where they live/work Tip Carry: Tip Carry: Tip Carry: Tip Carry: Tip Carry: Up/Down Up MEASUREMENTS Up Up/Down Up/Down Up/Down could have laws prohibiting carrying/using pocketknives that lock open. Overall Length-Open: MEASUREMENTS Spyderco perceived a gap between traditional slipjoints and today’s modern MEASUREMENTS 5 1/32in. (128mm) MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS Spyderco Knives Inc. 2010 Spyderco Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: locking folders and created a line of knives called SLIPITS. SLIPITS are 8 9/16in. (217mm) 6 15/16in. (175mm) Overall Length-Closed: 6 15/16in. (175mm) 8 1/2in. (216mm) 8 1/2in. (216mm) 6 13/16in. (173mm 820 Spyderco Way reliable, cosmopolitan non-locking folders which open one-handedly, have 2 3/4in. (70mm) Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Golden, Colorado 80403 Mid-Year Supplemental Catalog a fi nger choil for comfort and safety and are conveniently accessible. Their 5 1/32in. (128mm) 4 1/16in. (103mm) Cutting Edge Length: 4 1/16in. (103mm) 4 3/4in. (121mm) 4 3/4in. (121mm) 4 1/32in. /102mm blades are held open by a notched joint at the knife’s pivot that produces 2 1/16in. (52mm) At Spyderco quality is not an accident. It’s the result Cutting Edge Length: resistance functionally similar to traditional slip-joint penknives. SLIPITS Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: P: 303-279-8383 or 1-800-525-7770 3 7/16in. (87mm) 2 5/8in. (67mm) Blade Length: 2 5/8in. (67mm) 3 3/16in. (81mm) 3 3/16in. (81mm) 2 3/8in. / 61mm of focused intention, earnest effort, intelligent are the synthesis of modern and traditional knife designs. 2 5/16in. (59mm) F: 303-278-2229 Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: direction and careful execution. The result is the 3 3/4in. (95mm) 2 15/16in. (74mm) 2 15/16in. (74mm) 3 3/4in. (95 mm) 3 3/4in. (95mm) 2 7/8in./ 73mm *Beginning summer of 2010 our Lightweight UK Penknives will have a sum of wise choices and doing everything possible [email protected] blade steel change from GIN-1 to new Carpenter BD-1. to make quality knives, where steel meets the task. www.spyderco.com www.byrdknife.com

11 12 13 14 15 16 17 18 CLIPITS SLIPITS SLIPITS SLIPITS ACCESSORIES BYRD BYRD BYRD

C94CF BY04BK-2 UK PenKnife with carbon fi ber MEADOWLARK2 MOL1 MOLLE ADAPTER PLATE handle and CPM-S30V blade. The LIGHTWEIGHT Urban Professional among SLIPITS. MOLLE (Modular Lightweight Load-carrying Equipment) is the current UPGRADE ALERT!! system of load-bearing equipment based on the Pouch Attachment The Meadowlark2’s 3-inch blade is full fl at • Made in Golden, Colorado Ladder System (PALS). Consisting of a grid of nylon webbing, it allows The byrd Knife Line will be the subject of several bright ground, perfectly proportioned for effi ciency • Ambidextrous deep-pocket the modular attachment of pouches and other equipment to achieve and fresh engineering refi nements in 2010. byrds will have improved and cutting power. Handle fl aunts new deeper tip-up wire clip customized and mission-specifi c confi gurations. ergonomics and full-fl at ground high-performance 8Cr13MoV blades. texturing in the fi berglass reinforced nylon (FRN) • Finger choil for even better retention. • Spine jimping Spyderco’s new MOLLE Adapter Plate is a complete kit of components • Full fl at-ground blade allowing end-users to quickly and easily mount their Spyderco sheath knives BY03-2 CARA CARA2 STAINLESS • Ambidextrous tip-up/tip-down clip to any MOLLE platform with a vertical (handle-up or handle-down) or • Spine and choil jimping horizontal orientation. The heart of the system is a Boltaron® adapter Next evolution of the Cara Cara2 • Skeletonized nested handle liners C94TI C138 GRASSHOPPER plate that is attached to the MOLLE with one or two MALICE® Clips has a fl at-ground blade and • Screw construction (included). Screws, washers, and Chicago screw posts are then used to chamfered stainless handle, • Phosphor bronze bushings UK PenKnife with lightweight mount the sheath of your Spyderco fi xed-blade knife sheath using the offering pure high-performance Micro-sized SLIPIT for smooth open/close action titanium handle and CPM-S30V blade. existing holes for the G-Clip or large Tek-Lok™. The adapter plate kit without a large price tag. GrassHoppers draw remarks • FRN Bi-Directional Notch joint has smoother action than comes with an optional Velcro® strap that can be used as a secondary like “how cute” (a benefi cial Textured handle™ a traditional slip joint and a deep retention device when secured around the handle of your knife. Includes • Ambidextrous tip-up/tip- perception in a knife-cautious • David Boye Dent fi nger choil. An Olympian among detailed instructions and hardware necessary to mount any Spyderco fi xed- down clip world) yet offer real-world BY03G-2 • Full fl at-ground blade SLIPITS. blade or knives with mounting holes compatible with the G-Clip or large or • Spine and choil jimping cutting profi ciency. Similar in • Country of Origin: China small Tek-Loks. • Phosphor bronze bushings C143 LARGE size to conventional penknives, CARA CARA2 G-10 • Made in Golden, Colorado for smooth open/close their discreet Cr3 blades are LUM FOLDER • Ambidextrous deep-pocket Country of Origin: U.S.A. action Revamped G-10 Cara Cara2 with a fl at-ground blade, just over two-inches long. Their tip-up wire clip 3” (76mm) x 6-3/8” (162mm) • David Boye Dent spine jimping and a David Boye Dent. 4-way clip. Bob Lum did something no one else has. blades are held open, not locked, • Finger choil 2.41oz (68.5g) • Full fl at-ground blade He created a genesis, fusing a traditional by resistant pressure at pivot • Spine jimping • Country of Origin: China • Ambidextrous tip-up/tip-down clip Chinese fi xed blade and its ancient essence area. GrassHopper handles are • Full fl at-ground blade • Spine and choil jimping with features found in modern folding chamfered for comfort without rigid • Skeletonized nested handle liners knives resulting in a knife that stuns with corners to dig or bite into a gripping • Screw construction historical beauty and cuts with modern hand. Lanyard-hole accommodates a • Phosphor bronze bushings for smooth open/close impeccability. The large Chinese Folder pendant-chain or keyring. action has a fl at-ground VG-10 blade. The handle • David Boye Dent is black peel-ply G-10 with a Walker • Full fl at-ground blade LinerLock and 4-way tip-up/tip-down, • Country of Origin: China left-right-hand pocket clip. Tradition turned into an ergonomic folder. C94CF

C143 SPECS C94TI SPECS C138 SPECS C94CF SPECS BY03-2 SPECS BY03G-2 SPECS BY04BK-2 SPECS Steel: VG-10 Steel: CPM-S30V Steel: Cr3 Steel: CPM-S30V -2 Steel: 8Cr13MoV G-2 Steel: 8Cr13MoV BK-2 Steel: 8Cr3MoV C143 Weight: 4.3oz (123g) C94Ti Weight: 3.6oz (102g) C138 Weight: 1.4oz (39g) Weight: 2.2oz (63g) BY03 Weight: 5.6oz (160g) BY03 Weight: 4.25oz (121g) BY04 Weight: 2.4oz (67g) Edge: P Why SLIPITS? Edge: P Edge: P Edge: P Edge: P /PS Edge: P Edge: P/PS Country of Origin: Japan Country of Origin: U.S.A. Country of Origin: China Country of Origin: U.S.A. Country of Origin: China Country of Origin: China Country of Origin: China Knife buyers can appreciate the traditional aspects of non-locking folders Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Tip Carry: and often gravitate to this knife style because where they live/work Tip Carry: Tip Carry: Tip Carry: Tip Carry: Tip Carry: Up/Down Up MEASUREMENTS Up Up/Down Up/Down Up/Down could have laws prohibiting carrying/using pocketknives that lock open. Overall Length-Open: MEASUREMENTS Spyderco perceived a gap between traditional slipjoints and today’s modern MEASUREMENTS 5 1/32in. (128mm) MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS Spyderco Knives Inc. 2010 Spyderco Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: locking folders and created a line of knives called SLIPITS. SLIPITS are 8 9/16in. (217mm) 6 15/16in. (175mm) Overall Length-Closed: 6 15/16in. (175mm) 8 1/2in. (216mm) 8 1/2in. (216mm) 6 13/16in. (173mm 820 Spyderco Way reliable, cosmopolitan non-locking folders which open one-handedly, have 2 3/4in. (70mm) Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Golden, Colorado 80403 Mid-Year Supplemental Catalog a fi nger choil for comfort and safety and are conveniently accessible. Their 5 1/32in. (128mm) 4 1/16in. (103mm) Cutting Edge Length: 4 1/16in. (103mm) 4 3/4in. (121mm) 4 3/4in. (121mm) 4 1/32in. /102mm blades are held open by a notched joint at the knife’s pivot that produces 2 1/16in. (52mm) At Spyderco quality is not an accident. It’s the result Cutting Edge Length: resistance functionally similar to traditional slip-joint penknives. SLIPITS Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: P: 303-279-8383 or 1-800-525-7770 3 7/16in. (87mm) 2 5/8in. (67mm) Blade Length: 2 5/8in. (67mm) 3 3/16in. (81mm) 3 3/16in. (81mm) 2 3/8in. / 61mm of focused intention, earnest effort, intelligent are the synthesis of modern and traditional knife designs. 2 5/16in. (59mm) F: 303-278-2229 Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: direction and careful execution. The result is the 3 3/4in. (95mm) 2 15/16in. (74mm) 2 15/16in. (74mm) 3 3/4in. (95 mm) 3 3/4in. (95mm) 2 7/8in./ 73mm *Beginning summer of 2010 our Lightweight UK Penknives will have a sum of wise choices and doing everything possible [email protected] blade steel change from GIN-1 to new Carpenter BD-1. to make quality knives, where steel meets the task. www.spyderco.com www.byrdknife.com

11 12 13 14 15 16 17 18 CLIPITS SLIPITS SLIPITS SLIPITS ACCESSORIES BYRD BYRD BYRD

C94CF BY04BK-2 UK PenKnife with carbon fi ber MEADOWLARK2 MOL1 MOLLE ADAPTER PLATE handle and CPM-S30V blade. The LIGHTWEIGHT Urban Professional among SLIPITS. MOLLE (Modular Lightweight Load-carrying Equipment) is the current UPGRADE ALERT!! system of load-bearing equipment based on the Pouch Attachment The Meadowlark2’s 3-inch blade is full fl at • Made in Golden, Colorado Ladder System (PALS). Consisting of a grid of nylon webbing, it allows The byrd Knife Line will be the subject of several bright ground, perfectly proportioned for effi ciency • Ambidextrous deep-pocket the modular attachment of pouches and other equipment to achieve and fresh engineering refi nements in 2010. byrds will have improved and cutting power. Handle fl aunts new deeper tip-up wire clip customized and mission-specifi c confi gurations. ergonomics and full-fl at ground high-performance 8Cr13MoV blades. texturing in the fi berglass reinforced nylon (FRN) • Finger choil for even better retention. • Spine jimping Spyderco’s new MOLLE Adapter Plate is a complete kit of components • Full fl at-ground blade allowing end-users to quickly and easily mount their Spyderco sheath knives BY03-2 CARA CARA2 STAINLESS • Ambidextrous tip-up/tip-down clip to any MOLLE platform with a vertical (handle-up or handle-down) or • Spine and choil jimping horizontal orientation. The heart of the system is a Boltaron® adapter Next evolution of the Cara Cara2 • Skeletonized nested handle liners C94TI C138 GRASSHOPPER plate that is attached to the MOLLE with one or two MALICE® Clips has a fl at-ground blade and • Screw construction (included). Screws, washers, and Chicago screw posts are then used to chamfered stainless handle, • Phosphor bronze bushings UK PenKnife with lightweight mount the sheath of your Spyderco fi xed-blade knife sheath using the offering pure high-performance Micro-sized SLIPIT for smooth open/close action titanium handle and CPM-S30V blade. existing holes for the G-Clip or large Tek-Lok™. The adapter plate kit without a large price tag. GrassHoppers draw remarks • FRN Bi-Directional Notch joint has smoother action than comes with an optional Velcro® strap that can be used as a secondary like “how cute” (a benefi cial Textured handle™ a traditional slip joint and a deep retention device when secured around the handle of your knife. Includes • Ambidextrous tip-up/tip- perception in a knife-cautious • David Boye Dent fi nger choil. An Olympian among detailed instructions and hardware necessary to mount any Spyderco fi xed- down clip world) yet offer real-world BY03G-2 • Full fl at-ground blade SLIPITS. blade or knives with mounting holes compatible with the G-Clip or large or • Spine and choil jimping cutting profi ciency. Similar in • Country of Origin: China small Tek-Loks. • Phosphor bronze bushings C143 LARGE size to conventional penknives, CARA CARA2 G-10 • Made in Golden, Colorado for smooth open/close their discreet Cr3 blades are LUM FOLDER • Ambidextrous deep-pocket Country of Origin: U.S.A. action Revamped G-10 Cara Cara2 with a fl at-ground blade, just over two-inches long. Their tip-up wire clip 3” (76mm) x 6-3/8” (162mm) • David Boye Dent spine jimping and a David Boye Dent. 4-way clip. Bob Lum did something no one else has. blades are held open, not locked, • Finger choil 2.41oz (68.5g) • Full fl at-ground blade He created a genesis, fusing a traditional by resistant pressure at pivot • Spine jimping • Country of Origin: China • Ambidextrous tip-up/tip-down clip Chinese fi xed blade and its ancient essence area. GrassHopper handles are • Full fl at-ground blade • Spine and choil jimping with features found in modern folding chamfered for comfort without rigid • Skeletonized nested handle liners knives resulting in a knife that stuns with corners to dig or bite into a gripping • Screw construction historical beauty and cuts with modern hand. Lanyard-hole accommodates a • Phosphor bronze bushings for smooth open/close impeccability. The large Chinese Folder pendant-chain or keyring. action has a fl at-ground VG-10 blade. The handle • David Boye Dent is black peel-ply G-10 with a Walker • Full fl at-ground blade LinerLock and 4-way tip-up/tip-down, • Country of Origin: China left-right-hand pocket clip. Tradition turned into an ergonomic folder. C94CF

C143 SPECS C94TI SPECS C138 SPECS C94CF SPECS BY03-2 SPECS BY03G-2 SPECS BY04BK-2 SPECS Steel: VG-10 Steel: CPM-S30V Steel: Cr3 Steel: CPM-S30V -2 Steel: 8Cr13MoV G-2 Steel: 8Cr13MoV BK-2 Steel: 8Cr3MoV C143 Weight: 4.3oz (123g) C94Ti Weight: 3.6oz (102g) C138 Weight: 1.4oz (39g) Weight: 2.2oz (63g) BY03 Weight: 5.6oz (160g) BY03 Weight: 4.25oz (121g) BY04 Weight: 2.4oz (67g) Edge: P Why SLIPITS? Edge: P Edge: P Edge: P Edge: P /PS Edge: P Edge: P/PS Country of Origin: Japan Country of Origin: U.S.A. Country of Origin: China Country of Origin: U.S.A. Country of Origin: China Country of Origin: China Country of Origin: China Knife buyers can appreciate the traditional aspects of non-locking folders Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Tip Carry: Up/Down and often gravitate to this knife style because where they live/work Tip Carry: Up Tip Carry: Tip Carry: Up/Down Tip Carry: Up/Down Tip Carry: MEASUREMENTS Up Up/Down could have laws prohibiting carrying/using pocketknives that lock open. Overall Length-Open: MEASUREMENTS Spyderco perceived a gap between traditional slipjoints and today’s modern MEASUREMENTS 5 1/32in. (128mm) MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS Spyderco Knives Inc. 2010 Spyderco Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: 8 9/16in. (217mm) locking folders and created a line of knives called SLIPITS. SLIPITS are 6 15/16in. (175mm) 8 1/2in. (216mm) 8 1/2in. (216mm) Overall Length-Closed: 6 15/16in. (175mm) 6 13/16in. (173mm 820 Spyderco Way reliable, cosmopolitan non-locking folders which open one-handedly, have 2 3/4in. (70mm) Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Golden, Colorado 80403 Mid-Year Supplemental Catalog 5 1/32in. (128mm) a fi nger choil for comfort and safety and are conveniently accessible. Their 4 1/16in. (103mm) 4 3/4in. (121mm) 4 3/4in. (121mm) Cutting Edge Length: 4 1/16in. (103mm) 4 1/32in. /102mm blades are held open by a notched joint at the knife’s pivot that produces 2 1/16in. (52mm) Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: At Spyderco quality is not an accident. It’s the result 3 7/16in. (87mm) resistance functionally similar to traditional slip-joint penknives. SLIPITS 2 5/8in. (67mm) 3 3/16in. (81mm) 3 3/16in. (81mm) P: 303-279-8383 or 1-800-525-7770 Blade Length: 2 5/8in. (67mm) 2 3/8in. / 61mm of focused intention, earnest effort, intelligent are the synthesis of modern and traditional knife designs. 2 5/16in. (59mm) F: 303-278-2229 Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: direction and careful execution. The result is the 3 3/4in. (95mm) 2 15/16in. (74mm) 2 15/16in. (74mm) 3 3/4in. (95 mm) 3 3/4in. (95mm) 2 7/8in./ 73mm *Beginning summer of 2010 our Lightweight UK Penknives will have a sum of wise choices and doing everything possible [email protected] blade steel change from GIN-1 to new Carpenter BD-1. to make quality knives, where steel meets the task. www.spyderco.com www.byrdknife.com

11 12 13 14 15 16 17 18 CLIPITS SLIPITS SLIPITS SLIPITS ACCESSORIES BYRD BYRD BYRD

C94CF BY04BK-2 UK PenKnife with carbon fi ber MEADOWLARK2 MOL1 MOLLE ADAPTER PLATE handle and CPM-S30V blade. The LIGHTWEIGHT Urban Professional among SLIPITS. MOLLE (Modular Lightweight Load-carrying Equipment) is the current UPGRADE ALERT!! system of load-bearing equipment based on the Pouch Attachment The Meadowlark2’s 3-inch blade is full fl at • Made in Golden, Colorado Ladder System (PALS). Consisting of a grid of nylon webbing, it allows The byrd Knife Line will be the subject of several bright ground, perfectly proportioned for effi ciency • Ambidextrous deep-pocket the modular attachment of pouches and other equipment to achieve and fresh engineering refi nements in 2010. byrds will have improved and cutting power. Handle fl aunts new deeper tip-up wire clip customized and mission-specifi c confi gurations. ergonomics and full-fl at ground high-performance 8Cr13MoV blades. texturing in the fi berglass reinforced nylon (FRN) • Finger choil for even better retention. • Spine jimping Spyderco’s new MOLLE Adapter Plate is a complete kit of components • Full fl at-ground blade allowing end-users to quickly and easily mount their Spyderco sheath knives BY03-2 CARA CARA2 STAINLESS • Ambidextrous tip-up/tip-down clip to any MOLLE platform with a vertical (handle-up or handle-down) or • Spine and choil jimping horizontal orientation. The heart of the system is a Boltaron® adapter Next evolution of the Cara Cara2 • Skeletonized nested handle liners C94TI C138 GRASSHOPPER plate that is attached to the MOLLE with one or two MALICE® Clips has a fl at-ground blade and • Screw construction (included). Screws, washers, and Chicago screw posts are then used to chamfered stainless handle, • Phosphor bronze bushings UK PenKnife with lightweight mount the sheath of your Spyderco fi xed-blade knife sheath using the offering pure high-performance Micro-sized SLIPIT for smooth open/close action titanium handle and CPM-S30V blade. existing holes for the G-Clip or large Tek-Lok™. The adapter plate kit without a large price tag. GrassHoppers draw remarks • FRN Bi-Directional Notch joint has smoother action than comes with an optional Velcro® strap that can be used as a secondary like “how cute” (a benefi cial Textured handle™ a traditional slip joint and a deep retention device when secured around the handle of your knife. Includes • Ambidextrous tip-up/tip- perception in a knife-cautious • David Boye Dent fi nger choil. An Olympian among detailed instructions and hardware necessary to mount any Spyderco fi xed- down clip world) yet offer real-world BY03G-2 • Full fl at-ground blade SLIPITS. blade or knives with mounting holes compatible with the G-Clip or large or • Spine and choil jimping cutting profi ciency. Similar in • Country of Origin: China small Tek-Loks. • Phosphor bronze bushings C143 LARGE size to conventional penknives, CARA CARA2 G-10 • Made in Golden, Colorado for smooth open/close their discreet Cr3 blades are LUM FOLDER • Ambidextrous deep-pocket Country of Origin: U.S.A. action Revamped G-10 Cara Cara2 with a fl at-ground blade, just over two-inches long. Their tip-up wire clip 3” (76mm) x 6-3/8” (162mm) • David Boye Dent spine jimping and a David Boye Dent. 4-way clip. Bob Lum did something no one else has. blades are held open, not locked, • Finger choil 2.41oz (68.5g) • Full fl at-ground blade He created a genesis, fusing a traditional by resistant pressure at pivot • Spine jimping • Country of Origin: China • Ambidextrous tip-up/tip-down clip Chinese fi xed blade and its ancient essence area. GrassHopper handles are • Full fl at-ground blade • Spine and choil jimping with features found in modern folding chamfered for comfort without rigid • Skeletonized nested handle liners knives resulting in a knife that stuns with corners to dig or bite into a gripping • Screw construction historical beauty and cuts with modern hand. Lanyard-hole accommodates a • Phosphor bronze bushings for smooth open/close impeccability. The large Chinese Folder pendant-chain or keyring. action has a fl at-ground VG-10 blade. The handle • David Boye Dent is black peel-ply G-10 with a Walker • Full fl at-ground blade LinerLock and 4-way tip-up/tip-down, • Country of Origin: China left-right-hand pocket clip. Tradition turned into an ergonomic folder. C94CF

C143 SPECS C94TI SPECS C138 SPECS C94CF SPECS BY03-2 SPECS BY03G-2 SPECS BY04BK-2 SPECS Steel: VG-10 Steel: CPM-S30V Steel: Cr3 Steel: CPM-S30V -2 Steel: 8Cr13MoV G-2 Steel: 8Cr13MoV BK-2 Steel: 8Cr3MoV C143 Weight: 4.3oz (123g) C94Ti Weight: 3.6oz (102g) C138 Weight: 1.4oz (39g) Weight: 2.2oz (63g) BY03 Weight: 5.6oz (160g) BY03 Weight: 4.25oz (121g) BY04 Weight: 2.4oz (67g) Edge: P Why SLIPITS? Edge: P Edge: P Edge: P Edge: P /PS Edge: P Edge: P/PS Country of Origin: Japan Country of Origin: U.S.A. Country of Origin: China Country of Origin: U.S.A. Country of Origin: China Country of Origin: China Country of Origin: China Knife buyers can appreciate the traditional aspects of non-locking folders Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Tip Carry: Up/Down and often gravitate to this knife style because where they live/work Tip Carry: Up Tip Carry: Tip Carry: Up/Down Tip Carry: Up/Down Tip Carry: Up/Down MEASUREMENTS Up could have laws prohibiting carrying/using pocketknives that lock open. Overall Length-Open: MEASUREMENTS Spyderco perceived a gap between traditional slipjoints and today’s modern MEASUREMENTS 5 1/32in. (128mm) MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS Spyderco Knives Inc. 2010 Spyderco Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: 8 9/16in. (217mm) locking folders and created a line of knives called SLIPITS. SLIPITS are 6 15/16in. (175mm) 8 1/2in. (216mm) 8 1/2in. (216mm) 6 13/16in. (173mm Overall Length-Closed: 6 15/16in. (175mm) 820 Spyderco Way reliable, cosmopolitan non-locking folders which open one-handedly, have 2 3/4in. (70mm) Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Golden, Colorado 80403 Mid-Year Supplemental Catalog 5 1/32in. (128mm) a fi nger choil for comfort and safety and are conveniently accessible. Their 4 1/16in. (103mm) 4 3/4in. (121mm) 4 3/4in. (121mm) 4 1/32in. /102mm Cutting Edge Length: 4 1/16in. (103mm) blades are held open by a notched joint at the knife’s pivot that produces 2 1/16in. (52mm) Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: At Spyderco quality is not an accident. It’s the result 3 7/16in. (87mm) resistance functionally similar to traditional slip-joint penknives. SLIPITS 2 5/8in. (67mm) 3 3/16in. (81mm) 3 3/16in. (81mm) 2 3/8in. / 61mm P: 303-279-8383 or 1-800-525-7770 Blade Length: 2 5/8in. (67mm) of focused intention, earnest effort, intelligent are the synthesis of modern and traditional knife designs. 2 5/16in. (59mm) F: 303-278-2229 Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: direction and careful execution. The result is the 3 3/4in. (95mm) 2 15/16in. (74mm) 2 15/16in. (74mm) 3 3/4in. (95 mm) 3 3/4in. (95mm) 2 7/8in./ 73mm *Beginning summer of 2010 our Lightweight UK Penknives will have a sum of wise choices and doing everything possible [email protected] blade steel change from GIN-1 to new Carpenter BD-1. to make quality knives, where steel meets the task. www.spyderco.com www.byrdknife.com

11 12 13 14 15 16 17 18 CLIPITS SLIPITS SLIPITS SLIPITS ACCESSORIES BYRD BYRD BYRD

C94CF BY04BK-2 UK PenKnife with carbon fi ber MEADOWLARK2 MOL1 MOLLE ADAPTER PLATE handle and CPM-S30V blade. The LIGHTWEIGHT Urban Professional among SLIPITS. MOLLE (Modular Lightweight Load-carrying Equipment) is the current UPGRADE ALERT!! system of load-bearing equipment based on the Pouch Attachment The Meadowlark2’s 3-inch blade is full fl at • Made in Golden, Colorado Ladder System (PALS). Consisting of a grid of nylon webbing, it allows The byrd Knife Line will be the subject of several bright ground, perfectly proportioned for effi ciency • Ambidextrous deep-pocket the modular attachment of pouches and other equipment to achieve and fresh engineering refi nements in 2010. byrds will have improved and cutting power. Handle fl aunts new deeper tip-up wire clip customized and mission-specifi c confi gurations. ergonomics and full-fl at ground high-performance 8Cr13MoV blades. texturing in the fi berglass reinforced nylon (FRN) • Finger choil for even better retention. • Spine jimping Spyderco’s new MOLLE Adapter Plate is a complete kit of components • Full fl at-ground blade allowing end-users to quickly and easily mount their Spyderco sheath knives BY03-2 CARA CARA2 STAINLESS • Ambidextrous tip-up/tip-down clip to any MOLLE platform with a vertical (handle-up or handle-down) or • Spine and choil jimping horizontal orientation. The heart of the system is a Boltaron® adapter Next evolution of the Cara Cara2 • Skeletonized nested handle liners C94TI C138 GRASSHOPPER plate that is attached to the MOLLE with one or two MALICE® Clips has a fl at-ground blade and • Screw construction (included). Screws, washers, and Chicago screw posts are then used to chamfered stainless handle, • Phosphor bronze bushings UK PenKnife with lightweight mount the sheath of your Spyderco fi xed-blade knife sheath using the offering pure high-performance Micro-sized SLIPIT for smooth open/close action titanium handle and CPM-S30V blade. existing holes for the G-Clip or large Tek-Lok™. The adapter plate kit without a large price tag. GrassHoppers draw remarks • FRN Bi-Directional Notch joint has smoother action than comes with an optional Velcro® strap that can be used as a secondary like “how cute” (a benefi cial Textured handle™ a traditional slip joint and a deep retention device when secured around the handle of your knife. Includes • Ambidextrous tip-up/tip- perception in a knife-cautious • David Boye Dent fi nger choil. An Olympian among detailed instructions and hardware necessary to mount any Spyderco fi xed- down clip world) yet offer real-world BY03G-2 • Full fl at-ground blade SLIPITS. blade or knives with mounting holes compatible with the G-Clip or large or • Spine and choil jimping cutting profi ciency. Similar in • Country of Origin: China small Tek-Loks. • Phosphor bronze bushings C143 LARGE size to conventional penknives, CARA CARA2 G-10 • Made in Golden, Colorado for smooth open/close their discreet Cr3 blades are LUM FOLDER • Ambidextrous deep-pocket Country of Origin: U.S.A. action Revamped G-10 Cara Cara2 with a fl at-ground blade, just over two-inches long. Their tip-up wire clip 3” (76mm) x 6-3/8” (162mm) • David Boye Dent spine jimping and a David Boye Dent. 4-way clip. Bob Lum did something no one else has. blades are held open, not locked, • Finger choil 2.41oz (68.5g) • Full fl at-ground blade He created a genesis, fusing a traditional by resistant pressure at pivot • Spine jimping • Country of Origin: China • Ambidextrous tip-up/tip-down clip Chinese fi xed blade and its ancient essence area. GrassHopper handles are • Full fl at-ground blade • Spine and choil jimping with features found in modern folding chamfered for comfort without rigid • Skeletonized nested handle liners knives resulting in a knife that stuns with corners to dig or bite into a gripping • Screw construction historical beauty and cuts with modern hand. Lanyard-hole accommodates a • Phosphor bronze bushings for smooth open/close impeccability. The large Chinese Folder pendant-chain or keyring. action has a fl at-ground VG-10 blade. The handle • David Boye Dent is black peel-ply G-10 with a Walker • Full fl at-ground blade LinerLock and 4-way tip-up/tip-down, • Country of Origin: China left-right-hand pocket clip. Tradition turned into an ergonomic folder. C94CF

C143 SPECS C94TI SPECS C138 SPECS C94CF SPECS BY03-2 SPECS BY03G-2 SPECS BY04BK-2 SPECS Steel: VG-10 Steel: CPM-S30V Steel: Cr3 Steel: CPM-S30V -2 Steel: 8Cr13MoV G-2 Steel: 8Cr13MoV BK-2 Steel: 8Cr3MoV C143 Weight: 4.3oz (123g) C94Ti Weight: 3.6oz (102g) C138 Weight: 1.4oz (39g) Weight: 2.2oz (63g) BY03 Weight: 5.6oz (160g) BY03 Weight: 4.25oz (121g) BY04 Weight: 2.4oz (67g) Edge: P Why SLIPITS? Edge: P Edge: P Edge: P Edge: P /PS Edge: P Edge: P/PS Country of Origin: Japan Country of Origin: U.S.A. Country of Origin: China Country of Origin: U.S.A. Country of Origin: China Country of Origin: China Country of Origin: China Knife buyers can appreciate the traditional aspects of non-locking folders Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Tip Carry: Up/Down and often gravitate to this knife style because where they live/work Tip Carry: Up Tip Carry: Tip Carry: Tip Carry: Up/Down Tip Carry: Up/Down MEASUREMENTS Up Up/Down could have laws prohibiting carrying/using pocketknives that lock open. Overall Length-Open: MEASUREMENTS Spyderco perceived a gap between traditional slipjoints and today’s modern MEASUREMENTS 5 1/32in. (128mm) MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS Spyderco Knives Inc. 2010 Spyderco Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: 8 9/16in. (217mm) locking folders and created a line of knives called SLIPITS. SLIPITS are 6 15/16in. (175mm) 8 1/2in. (216mm) 6 13/16in. (173mm Overall Length-Closed: 6 15/16in. (175mm) 8 1/2in. (216mm) 820 Spyderco Way reliable, cosmopolitan non-locking folders which open one-handedly, have 2 3/4in. (70mm) Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Golden, Colorado 80403 Mid-Year Supplemental Catalog 5 1/32in. (128mm) a fi nger choil for comfort and safety and are conveniently accessible. Their 4 1/16in. (103mm) 4 3/4in. (121mm) 4 1/32in. /102mm Cutting Edge Length: 4 1/16in. (103mm) 4 3/4in. (121mm) blades are held open by a notched joint at the knife’s pivot that produces 2 1/16in. (52mm) Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: At Spyderco quality is not an accident. It’s the result 3 7/16in. (87mm) resistance functionally similar to traditional slip-joint penknives. SLIPITS 2 5/8in. (67mm) 3 3/16in. (81mm) 2 3/8in. / 61mm P: 303-279-8383 or 1-800-525-7770 Blade Length: 2 5/8in. (67mm) 3 3/16in. (81mm) of focused intention, earnest effort, intelligent are the synthesis of modern and traditional knife designs. 2 5/16in. (59mm) F: 303-278-2229 Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: direction and careful execution. The result is the 3 3/4in. (95mm) 2 15/16in. (74mm) 2 15/16in. (74mm) 3 3/4in. (95 mm) 3 3/4in. (95mm) 2 7/8in./ 73mm *Beginning summer of 2010 our Lightweight UK Penknives will have a sum of wise choices and doing everything possible [email protected] blade steel change from GIN-1 to new Carpenter BD-1. to make quality knives, where steel meets the task. www.spyderco.com www.byrdknife.com

11 12 13 14 15 16 17 18 CLIPITS SLIPITS SLIPITS SLIPITS ACCESSORIES BYRD BYRD BYRD

C94CF BY04BK-2 UK PenKnife with carbon fi ber MEADOWLARK2 MOL1 MOLLE ADAPTER PLATE handle and CPM-S30V blade. The LIGHTWEIGHT Urban Professional among SLIPITS. MOLLE (Modular Lightweight Load-carrying Equipment) is the current UPGRADE ALERT!! system of load-bearing equipment based on the Pouch Attachment The Meadowlark2’s 3-inch blade is full fl at • Made in Golden, Colorado Ladder System (PALS). Consisting of a grid of nylon webbing, it allows The byrd Knife Line will be the subject of several bright ground, perfectly proportioned for effi ciency • Ambidextrous deep-pocket the modular attachment of pouches and other equipment to achieve and fresh engineering refi nements in 2010. byrds will have improved and cutting power. Handle fl aunts new deeper tip-up wire clip customized and mission-specifi c confi gurations. ergonomics and full-fl at ground high-performance 8Cr13MoV blades. texturing in the fi berglass reinforced nylon (FRN) • Finger choil for even better retention. • Spine jimping Spyderco’s new MOLLE Adapter Plate is a complete kit of components • Full fl at-ground blade allowing end-users to quickly and easily mount their Spyderco sheath knives BY03-2 CARA CARA2 STAINLESS • Ambidextrous tip-up/tip-down clip to any MOLLE platform with a vertical (handle-up or handle-down) or • Spine and choil jimping horizontal orientation. The heart of the system is a Boltaron® adapter Next evolution of the Cara Cara2 • Skeletonized nested handle liners C94TI C138 GRASSHOPPER plate that is attached to the MOLLE with one or two MALICE® Clips has a fl at-ground blade and • Screw construction (included). Screws, washers, and Chicago screw posts are then used to chamfered stainless handle, • Phosphor bronze bushings UK PenKnife with lightweight mount the sheath of your Spyderco fi xed-blade knife sheath using the offering pure high-performance Micro-sized SLIPIT for smooth open/close action titanium handle and CPM-S30V blade. existing holes for the G-Clip or large Tek-Lok™. The adapter plate kit without a large price tag. GrassHoppers draw remarks • FRN Bi-Directional Notch joint has smoother action than comes with an optional Velcro® strap that can be used as a secondary like “how cute” (a benefi cial Textured handle™ a traditional slip joint and a deep retention device when secured around the handle of your knife. Includes • Ambidextrous tip-up/tip- perception in a knife-cautious • David Boye Dent fi nger choil. An Olympian among detailed instructions and hardware necessary to mount any Spyderco fi xed- down clip world) yet offer real-world BY03G-2 • Full fl at-ground blade SLIPITS. blade or knives with mounting holes compatible with the G-Clip or large or • Spine and choil jimping cutting profi ciency. Similar in • Country of Origin: China small Tek-Loks. • Phosphor bronze bushings C143 LARGE size to conventional penknives, CARA CARA2 G-10 • Made in Golden, Colorado for smooth open/close their discreet Cr3 blades are LUM FOLDER • Ambidextrous deep-pocket Country of Origin: U.S.A. action Revamped G-10 Cara Cara2 with a fl at-ground blade, just over two-inches long. Their tip-up wire clip 3” (76mm) x 6-3/8” (162mm) • David Boye Dent spine jimping and a David Boye Dent. 4-way clip. Bob Lum did something no one else has. blades are held open, not locked, • Finger choil 2.41oz (68.5g) • Full fl at-ground blade He created a genesis, fusing a traditional by resistant pressure at pivot • Spine jimping • Country of Origin: China • Ambidextrous tip-up/tip-down clip Chinese fi xed blade and its ancient essence area. GrassHopper handles are • Full fl at-ground blade • Spine and choil jimping with features found in modern folding chamfered for comfort without rigid • Skeletonized nested handle liners knives resulting in a knife that stuns with corners to dig or bite into a gripping • Screw construction historical beauty and cuts with modern hand. Lanyard-hole accommodates a • Phosphor bronze bushings for smooth open/close impeccability. The large Chinese Folder pendant-chain or keyring. action has a fl at-ground VG-10 blade. The handle • David Boye Dent is black peel-ply G-10 with a Walker • Full fl at-ground blade LinerLock and 4-way tip-up/tip-down, • Country of Origin: China left-right-hand pocket clip. Tradition turned into an ergonomic folder. C94CF

C143 SPECS C94TI SPECS C138 SPECS C94CF SPECS BY03-2 SPECS BY03G-2 SPECS BY04BK-2 SPECS Steel: VG-10 Steel: CPM-S30V Steel: Cr3 Steel: CPM-S30V -2 Steel: 8Cr13MoV G-2 Steel: 8Cr13MoV BK-2 Steel: 8Cr3MoV C143 Weight: 4.3oz (123g) C94Ti Weight: 3.6oz (102g) C138 Weight: 1.4oz (39g) Weight: 2.2oz (63g) BY03 Weight: 5.6oz (160g) BY03 Weight: 4.25oz (121g) BY04 Weight: 2.4oz (67g) Edge: P Why SLIPITS? Edge: P Edge: P Edge: P Edge: P /PS Edge: P Edge: P/PS Country of Origin: Japan Country of Origin: U.S.A. Country of Origin: China Country of Origin: U.S.A. Country of Origin: China Country of Origin: China Country of Origin: China Knife buyers can appreciate the traditional aspects of non-locking folders Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Tip Carry: Up/Down and often gravitate to this knife style because where they live/work Tip Carry: Up Tip Carry: Tip Carry: Tip Carry: Tip Carry: Up/Down MEASUREMENTS Up Up/Down Up/Down could have laws prohibiting carrying/using pocketknives that lock open. Overall Length-Open: MEASUREMENTS Spyderco perceived a gap between traditional slipjoints and today’s modern MEASUREMENTS 5 1/32in. (128mm) MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS Spyderco Knives Inc. 2010 Spyderco Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: 8 9/16in. (217mm) locking folders and created a line of knives called SLIPITS. SLIPITS are 6 15/16in. (175mm) 6 13/16in. (173mm Overall Length-Closed: 6 15/16in. (175mm) 8 1/2in. (216mm) 8 1/2in. (216mm) 820 Spyderco Way reliable, cosmopolitan non-locking folders which open one-handedly, have 2 3/4in. (70mm) Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Golden, Colorado 80403 Mid-Year Supplemental Catalog 5 1/32in. (128mm) a fi nger choil for comfort and safety and are conveniently accessible. Their 4 1/16in. (103mm) 4 1/32in. /102mm Cutting Edge Length: 4 1/16in. (103mm) 4 3/4in. (121mm) 4 3/4in. (121mm) blades are held open by a notched joint at the knife’s pivot that produces 2 1/16in. (52mm) Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: At Spyderco quality is not an accident. It’s the result 3 7/16in. (87mm) resistance functionally similar to traditional slip-joint penknives. SLIPITS 2 5/8in. (67mm) 2 3/8in. / 61mm P: 303-279-8383 or 1-800-525-7770 Blade Length: 2 5/8in. (67mm) 3 3/16in. (81mm) 3 3/16in. (81mm) of focused intention, earnest effort, intelligent are the synthesis of modern and traditional knife designs. 2 5/16in. (59mm) F: 303-278-2229 Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: direction and careful execution. The result is the 3 3/4in. (95mm) 2 15/16in. (74mm) 2 15/16in. (74mm) 3 3/4in. (95 mm) 3 3/4in. (95mm) 2 7/8in./ 73mm *Beginning summer of 2010 our Lightweight UK Penknives will have a sum of wise choices and doing everything possible [email protected] blade steel change from GIN-1 to new Carpenter BD-1. to make quality knives, where steel meets the task. www.spyderco.com www.byrdknife.com

11 12 13 14 15 16 17 18 CLIPITS SLIPITS SLIPITS SLIPITS ACCESSORIES BYRD BYRD BYRD

C94CF BY04BK-2 UK PenKnife with carbon fi ber MEADOWLARK2 MOL1 MOLLE ADAPTER PLATE handle and CPM-S30V blade. The LIGHTWEIGHT Urban Professional among SLIPITS. MOLLE (Modular Lightweight Load-carrying Equipment) is the current UPGRADE ALERT!! system of load-bearing equipment based on the Pouch Attachment The Meadowlark2’s 3-inch blade is full fl at • Made in Golden, Colorado Ladder System (PALS). Consisting of a grid of nylon webbing, it allows The byrd Knife Line will be the subject of several bright ground, perfectly proportioned for effi ciency • Ambidextrous deep-pocket the modular attachment of pouches and other equipment to achieve and fresh engineering refi nements in 2010. byrds will have improved and cutting power. Handle fl aunts new deeper tip-up wire clip customized and mission-specifi c confi gurations. ergonomics and full-fl at ground high-performance 8Cr13MoV blades. texturing in the fi berglass reinforced nylon (FRN) • Finger choil for even better retention. • Spine jimping Spyderco’s new MOLLE Adapter Plate is a complete kit of components • Full fl at-ground blade allowing end-users to quickly and easily mount their Spyderco sheath knives BY03-2 CARA CARA2 STAINLESS • Ambidextrous tip-up/tip-down clip to any MOLLE platform with a vertical (handle-up or handle-down) or • Spine and choil jimping horizontal orientation. The heart of the system is a Boltaron® adapter Next evolution of the Cara Cara2 • Skeletonized nested handle liners C94TI C138 GRASSHOPPER plate that is attached to the MOLLE with one or two MALICE® Clips has a fl at-ground blade and • Screw construction (included). Screws, washers, and Chicago screw posts are then used to chamfered stainless handle, • Phosphor bronze bushings UK PenKnife with lightweight mount the sheath of your Spyderco fi xed-blade knife sheath using the offering pure high-performance Micro-sized SLIPIT for smooth open/close action titanium handle and CPM-S30V blade. existing holes for the G-Clip or large Tek-Lok™. The adapter plate kit without a large price tag. GrassHoppers draw remarks • FRN Bi-Directional Notch joint has smoother action than comes with an optional Velcro® strap that can be used as a secondary like “how cute” (a benefi cial Textured handle™ a traditional slip joint and a deep retention device when secured around the handle of your knife. Includes • Ambidextrous tip-up/tip- perception in a knife-cautious • David Boye Dent fi nger choil. An Olympian among detailed instructions and hardware necessary to mount any Spyderco fi xed- down clip world) yet offer real-world BY03G-2 • Full fl at-ground blade SLIPITS. blade or knives with mounting holes compatible with the G-Clip or large or • Spine and choil jimping cutting profi ciency. Similar in • Country of Origin: China small Tek-Loks. • Phosphor bronze bushings C143 LARGE size to conventional penknives, CARA CARA2 G-10 • Made in Golden, Colorado for smooth open/close their discreet Cr3 blades are LUM FOLDER • Ambidextrous deep-pocket Country of Origin: U.S.A. action Revamped G-10 Cara Cara2 with a fl at-ground blade, just over two-inches long. Their tip-up wire clip 3” (76mm) x 6-3/8” (162mm) • David Boye Dent spine jimping and a David Boye Dent. 4-way clip. Bob Lum did something no one else has. blades are held open, not locked, • Finger choil 2.41oz (68.5g) • Full fl at-ground blade He created a genesis, fusing a traditional by resistant pressure at pivot • Spine jimping • Country of Origin: China • Ambidextrous tip-up/tip-down clip Chinese fi xed blade and its ancient essence area. GrassHopper handles are • Full fl at-ground blade • Spine and choil jimping with features found in modern folding chamfered for comfort without rigid • Skeletonized nested handle liners knives resulting in a knife that stuns with corners to dig or bite into a gripping • Screw construction historical beauty and cuts with modern hand. Lanyard-hole accommodates a • Phosphor bronze bushings for smooth open/close impeccability. The large Chinese Folder pendant-chain or keyring. action has a fl at-ground VG-10 blade. The handle • David Boye Dent is black peel-ply G-10 with a Walker • Full fl at-ground blade LinerLock and 4-way tip-up/tip-down, • Country of Origin: China left-right-hand pocket clip. Tradition turned into an ergonomic folder. C94CF

C143 SPECS C94TI SPECS C138 SPECS C94CF SPECS BY03-2 SPECS BY03G-2 SPECS BY04BK-2 SPECS Steel: VG-10 Steel: CPM-S30V Steel: Cr3 Steel: CPM-S30V -2 Steel: 8Cr13MoV G-2 Steel: 8Cr13MoV BK-2 Steel: 8Cr3MoV C143 Weight: 4.3oz (123g) C94Ti Weight: 3.6oz (102g) C138 Weight: 1.4oz (39g) Weight: 2.2oz (63g) BY03 Weight: 5.6oz (160g) BY03 Weight: 4.25oz (121g) BY04 Weight: 2.4oz (67g) Edge: P Why SLIPITS? Edge: P Edge: P Edge: P Edge: P /PS Edge: P Edge: P/PS Country of Origin: Japan Country of Origin: U.S.A. Country of Origin: China Country of Origin: U.S.A. Country of Origin: China Country of Origin: China Country of Origin: China Knife buyers can appreciate the traditional aspects of non-locking folders Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Clip: Left/Right Tip Carry: Up/Down and often gravitate to this knife style because where they live/work Tip Carry: Up Tip Carry: Tip Carry: Tip Carry: Tip Carry: MEASUREMENTS Up Up/Down Up/Down Up/Down could have laws prohibiting carrying/using pocketknives that lock open. Overall Length-Open: MEASUREMENTS Spyderco perceived a gap between traditional slipjoints and today’s modern MEASUREMENTS 5 1/32in. (128mm) MEASUREMENTS MEASUREMENTS MEASUREMENTS MEASUREMENTS Spyderco Knives Inc. 2010 Spyderco Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: Overall Length-Open: 8 9/16in. (217mm) locking folders and created a line of knives called SLIPITS. SLIPITS are 6 15/16in. (175mm) Overall Length-Closed: 6 15/16in. (175mm) 8 1/2in. (216mm) 8 1/2in. (216mm) 6 13/16in. (173mm 820 Spyderco Way reliable, cosmopolitan non-locking folders which open one-handedly, have 2 3/4in. (70mm) Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Overall Length-Closed: Golden, Colorado 80403 Mid-Year Supplemental Catalog 5 1/32in. (128mm) a fi nger choil for comfort and safety and are conveniently accessible. Their 4 1/16in. (103mm) Cutting Edge Length: 4 1/16in. (103mm) 4 3/4in. (121mm) 4 3/4in. (121mm) 4 1/32in. /102mm blades are held open by a notched joint at the knife’s pivot that produces 2 1/16in. (52mm) Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: Cutting Edge Length: At Spyderco quality is not an accident. It’s the result 3 7/16in. (87mm) resistance functionally similar to traditional slip-joint penknives. SLIPITS 2 5/8in. (67mm) P: 303-279-8383 or 1-800-525-7770 Blade Length: 2 5/8in. (67mm) 3 3/16in. (81mm) 3 3/16in. (81mm) 2 3/8in. / 61mm of focused intention, earnest effort, intelligent are the synthesis of modern and traditional knife designs. 2 5/16in. (59mm) F: 303-278-2229 Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: Blade Length: direction and careful execution. The result is the 3 3/4in. (95mm) 2 15/16in. (74mm) 2 15/16in. (74mm) 3 3/4in. (95 mm) 3 3/4in. (95mm) 2 7/8in./ 73mm *Beginning summer of 2010 our Lightweight UK Penknives will have a sum of wise choices and doing everything possible [email protected] blade steel change from GIN-1 to new Carpenter BD-1. to make quality knives, where steel meets the task. www.spyderco.com www.byrdknife.com

11 12 13 14 15 16 17 18