ZU7/ZU5/ZU4 Zynq Ultrascale+ Mpsoc System on Module

YOUR STRATEGIC PARTNER FOR EMBEDDED SOLUTIONS

FPGA Module

i.MX8M Nano SODIMM SOM

i.MX8 QM/QP Pico ITX SBC

www.iwavesystems.com ABOUT US

iWave looks back with pride at nearly two decades of technological experience resolving technical complexities that enables large corporations to focus on their core competencies and succeed by shortening their product development life cycle. iWave focuses on System On Modules, SBC product development and comprehensive Engineering design services involving embedded hardware, FPGA and software development in industrial, medical, automotive and embedded computing domains. iWave's business model is flexible and strives to adapt to customer requirements. iWave's well tested and proven industry standard SOM modules in SMARC, Qseven, SODIMM and COM Express form factors, helped our clients reduce the development cycle by almost 50% and cut down on the time to market. iWave offers ODM products for multiple industry segments such as HMI solution, OBD II device and rugged handheld devices. iWave provides customized board support packages (BSP) for Linux, Android, QNX, Ubuntu and Windows 10 IoT which are developed in-house. iWave boasts of numerous FPGA IP's which include Avionics Technology (ARINC 818 & sFPDP), Storage Cores, Image and Video Processing Cores, Legacy x86 IP cores and Peripherals are some of the FPGA IP core categories.

Sales Support iwave Systems business development team is committed to provide the best possible support for our customers.

For assistance, contact our Business Development team at,

Phone : +91-80-26683700, 26781643, 26786245 - -

iW-Product-Catalog-BR-R6.0 Com Express Modules ...... 02 Single Board Computers

ZU5/ZU4/ZU3/ZU2 Zynq Ultrascale+ MPSoC Single Board Computer ...... 03 i.MX8 Quad Max/Quad Plus Pico ITX Single Board Computer ...... 04 i.MX6 Pico ITX Single Board Computer ...... 06 FPGA Modules

ZU19/ZU17/ZU11 Zynq Ultrascale+ MPSoC System On Module ...... 08 ZU7/ZU5/ZU4 Zynq Ultrascale+ MPSoC System On Module ...... 10 Arria 10 SoC/FPGA System On Module ...... 12 Zynq 7000 System On Module ...... 14

SMARC Modules

i.MX8 QM/QP SMARC System On Module ...... 16 i.MX8M SMARC System On Module ...... 18

SODIMM Modules

i.MX8M Mini / Nano SODIMM System On Module ...... 20 INDEX Zynq 7000 SODIMM System On Module ...... 14 i.MX6UL/ULL/ULZ SODIMM System On Module ...... 22 i.MX6Q/D/DL/S SODIMM System On Module ...... 24 Qseven Modules

i.MX6 Qseven System On Module ...... 26 RZ /G1H/G1M/G1N Qseven System On Module ...... 28

Comparison of SMARC SOM Modules ...... 30 Comparison of SODIMM SOM Modules ...... 31 Comparison of Qseven SOM Modules ...... 32 ODM Solutions

Connected Car Device - OBD II ...... 33 Human Machine Interface ...... 34 Embedded Solutions & Services

Engineering Services ...... 36 Software Expertise ...... 37 ARINC818 Solutions & FPGA IP Cores ...... 38 Product Summary ...... 41 ZU19/17/11 Zynq UltraScale+ MPSoC Type-7 COM Express NEW System On Module iW-RainboW-G35M-CM

HIGHLIGHTS: SPECIFICATIONS

Quad ARM Cortex A53 @ 1.5GHz Xilinx Zynq Ultrascale+ MPSoC: COM Express Type-7 Connector Features: Compatible Zynq Ultrascale+ MPSoC Family PCIe x 32 ports Dual Cortex R5, ARM Mali 400 MP2 (FFVC1760) - ZU19EG, ZU17EG, ZU11EG 10GBaseKR Ethernet with NC-SI x 4 ports Programming Logic with up to 1.1M Logic SATA x 2 Ports 10GBaseKR Ethernet with NC-SI cells and Processing System with integrated Gigabit Ethernet x 1 Port (through On - SOM

Two FireFly connector each can support up to 112Gbps Quad-core ARM Cortex-A53 MPCore Gigabit Ethernet PHY transceiver) Application processor (up to 1.5GHz) USB3.0 Ports x 4 (through On - SOM USB2.0 COM Express Type-7 Compact transceiver and Hub) Dual-core ARM Cortex-R5 MPCore Real Time USB2.0 Ports x 4 (through On - SOM USB2.0 Industrial grade availability Processor (up to 600MHz) transceiver and Hub) 10+ Years long term support Mali™ - 400MP2 Graphics Processor USB2.0 OTG x 1 Port (through On - SOM Memory: USB2.0 transceiver) # 4GB DDR4(64bit) for PS with ECC GPIO / SD (4bit) x 1 Port 4GB DDR4-1(64bit) for PL from BANK64,65,66 SPI x 1 Port

APPLICATIONS 4GB DDR4-2(64bit) for PL from BANK69,70,71 LPC / ESPI x 1 Port 16GB eMMC Flash (Expandable to 128GB) Debug UART x 1 Port Test & Measurement Other On Module Features: Data UART x 1 Port Industrial HMI & Control Systems Dialog's DA9062 PMIC with RTC I2C x 2 Ports # Power Supply: Medical Devices MAX10 FPGA 12V(from Board to Board Connector) Cloud Computing Gigabit Ethernet PHY Transceiver Temperature Supported: QR Code USB2.0 Transceiver Data Centers -40°C to +85°C (Industrial) USB3.0 Hub Form Factor: Video Surveillance Two FireFly connector each can support up to 112Gbps 95mm x 95mm COM Express Compact Embedded Computing JTAG Header OS Support: Rail & Vehicular Fan Header Linux 4.14.0, Ubuntu 16.04.6 LTS*, QNX 7.0.0 # optional

ZU19/ZU17/ZU11 Zynq US+ MPSoC Type-7 COM Express Block Diagram

Power to Power 12V Processing System (PS) Power IN (Optional) Peripherals Quad -core ARM Cortex -A53, Regulators Dual -core ARM Cortex -R5, Mali -400MP2 RGMII Ethernet Gigabit Ethernet GEM0 GBEO : DDR4 - 4GB DDR4 (64bit) PHY DDR (Upgradable) GPIO / SD (4bit) x 1 Memory GPIO / SD1 SD/GPIO DDR4 ECC (8bit) DDR4 (ECC) Controller SPI x 1 SPI1 SPI I2C0 eMMC – 16GB I2C0 I2C eMMC (8bit) I2C1 (Upgradable) SD0 I2C1 SMB Debug UART UART0 UART0 UART x 1 CAN1,UART1 UART1 ULPI USB2.0 USB1 PHY # USB OTG (Optional) USB3.0 x 4 ULPI USB2.0 USB0 PHY USB3.0 USB3.0 x 4 Hub (1:4) PS_GTR[2] 1 USB 3.0 M10 JTAG JTAG JTAG PS_GTR[1:0] 1 SATA [1:0] Header PS JTAG PS GTR (4 TXVR) SATA x 2 PS_GTR[3] 1 Zynq Ultrascale + COM Express ZU19EG/ZU17EG/ZU11EG Type 7 Programmable Logic (PL) (2 x 220Pins) FPGA PL - HP IOs DDR4 - 4GB DDR4 (64bit) Bank FPGA IOs M10 JTAG Bank 93 MAX10 # (Upgradable) 64,65,66 LPC / ESPI x 10 Bank LPC / ESPI Bank 94 68,67 Net. Ctrl Sideband Interface x 8 Bank 90 NC-SI DDR4 – 4GB DDR4 (64bit) Bank Bank 91 10G Control Signals x 30 69,70,71 10G_KR CTRL (Upgradable) FPGA PL - HD IOs

Clock To Transceiver Bank 231 10G x 4

2 10G_KR Generator Bank PCIe x 4 Bank 224 PCIe[31:28] PCIe x 4 Bank 225 PCIe[27:24] PCIe x 4 Bank 226 PCIe[23:20] PCIe x 4 Bank 227 PCIe[19:16] Bank 228 PCIe x 4

GTH Transceiver PCIe[15:12] PCIe x 4 Bank 229 PCIe[11:8] FireFly (x4) 3 High Speed Transceiver (4 Channels) 3 PCIe x 4 PCIe[7:4] Connector - 1 Bank 130 GTY Transceiver Bank 128 3 FireFly (x4) High Speed Transceiver (4 Channels) PCIe x 4 Connector - 2 Bank 131 Bank 129 PCIe[3:0]

12V 1 PS GTR Transceiver supports data rates up to 6Gb/s and can be configured as PCIe/SATA/USB3.0/DisplayPort/Ethernet SGMII. FAN Header 2 PL GTH Transceiver supports data rates up to 16.3Gb/s. 3 PL GTY Transceiver supports data rates up to 32.75Gb/s # Optional 2 ZU5/ZU4/ZU3/ZU2 ZynqUltrascale + MPSoC Pico ITX SBC NEW Single Board Computer iW-RainboW-G36S

HIGHLIGHTS: SPECIFICATIONS Zynq Ultrascale+ MPSoC (ZU2/3-CG/EG, ZU4/5-CG/EG/EV) Zynq Ultrascale + MPSoC 20 Pin PS Header RTC Coin cell Holder Quad/Dual ARM Cortex - A53 @ 1.5GHz Processing System (PS) Quad/Dual Arm Cortex -A53 @ 1.5GHz WLAN & BT with Antenna connectors # Dual Cortex - R5 @ 600MHz Dual Cortex-R5 @ 600MHz Features from PL H.264/H.265 4K Video Encoder/Decoder (VCU) H.264/H.265 Video Encoder/Decoder (VCU) 4K HDMI Output Connector

ARM Mali - 400MP2 GPU ARM Mali-400 Mp2 GPU @677MHz 4K HDMI Input Connector 12G SDI Input though BNC Jack Up to 256K FPGA Logic cells Programming Logic (PL) Up to 256K Logic Cells 12G SDI Output through BNC Jack 4GB PS DDR4 with ECC & 2GB PL DDR4 12Pin Pmod Connector PLGTH Transceivers x 4 @ 12.5 Gbps 20 Pin ADC Header FMC Connector with 144 FPGA IOs for SOM Expansion Memory Interfaces SFP+ Connector # 4GB DDR4 with ECC for PS 4K HDMI Input & Output Ports and Display Port FMC HPC Connector 2GB DDR4 for PL 12G SDI Video Input & Output Ports 8 GB eMMC Flash (Expandable to 128GB) FPGA IOs from HP Bank - 24LVDS/48SE

Micro SD Connector FPGA IOs from HD Bank- 48LVDS/96SE Dual Gigabit Ethernet & USB3.0 Type A ports GTH High Speed transceiver-4 channels # EEPROM for MAC Address OS Support M.2 KeyB port, SFP+ Connector (Optional) # QSPI Flash for PL Linux, QNX* Features from PS: ADC Header & Pmod Connector Power Supply Dual Gigabit Ethernet through RJ45 Magjack 12V input through 2.5mm Jack 802.11 a/b/g/n/ac Wi-Fi & BT 5.0 Dual USB3.0 Type A Jack Temperature Supported 10+ Years long term support Display Port Connector -40°C to +85°C Industrial APPLICATIONS M.2 Key B Connector with SATA/PCIe & USB3.0 Environment Specification Debug UART Header RoHS2 and REACH Compliance AI /ML QR Code JTAG Header Form Factor Industrial IoT RS232 Header 100mm x 72mm Human Machine Interface # optional Advanced Driver Assistance Systems

ZU5/ZU4/ZU3/ZU2 Zynq US+ MPSoC SBC Block Diagram

12V Power 12V Power Power to Processing System (PS) Connector Regulators Peripherals Quad/ Dual ARM Cortex - A53, Dual Cortex- R5,Mali-400MP2,VCU DDR4 – 4GB DDR4 (64bit) RTC Coin cell DDR DP PMIC (Upgradable) 2 Holder Memory DP x 1 Connector DDR4 (ECC) DDR4 ECC (8bit) Controller Lane1:0 (Optional) SIM Nano SIM Connector eMMC – 8GB eMMC (8bit) SD0 (Upgradable) SATA/PCIe x 1 Debug UART Lane2 M.2 Key B Debug UART UART0 Header USB3.0/2.0 x 1 Connector USB3.0 x 1 4 Port JTAG Lane3 JTAG Header PS JTAG USB Hub USB 3.0/2.0 x 2 Dual Stack USB 3.0 TypeA Micro SD SD (4bit) x 1 Connector SD1 Antenna RF (WLAN, BT ) WLAN+BT ULPI USB2.0 Connectors (Optional) USB0 UART x 1 PHY UART1 SPI x 1 RGMII Ethernet Gigabit Ethernet1 SPI0 GEM0 20 Pin PS CAN x 2 PHY1 Dual RJ45 Header CAN0, CAN1 Gigabit Ethernet2 Magjack I2C x 2 RGMII Ethernet I2C0,I2C1 GEM3 PHY2 EEPROM Zynq Ultrascale+ (SFVC784) (For MAC ADDR) 2 SFP+ Conn 12Pin FPGA IOs x 8 ZU4/ZU5 - CG/EG/EV (Optional) PmodConn 2 3 ZU2/ZU3 - CG/EG 20 pin ADC ADC Input x 16 Programmable Logic (PL) SDI Video Out ADC Input x 1 3 BNC Jack Header SYSMONE4 GTH Transceiver 4 3 4 RS232 Rs232 x 1 RS232 Bank 224 High Speed Transceiver x 1 SDI Video In FPGA IOs Header Transceiver CH3 BNC Jack

QSPI Flash HD Bank (Optional) 46 FPGA IOs from HP Bank (24LVDS/48SE) FMC HPC HD Bank FPGA IOs from HD Bank (48LVDS/96SE) Connector FPGA IOs to FMC (24LVDS/48SE) 43,44,45 FPGA IOs to FMC (48LVDS/96SE) HP Bank 4 64 Bank 224 High Speed Transceiver x 3 HDMI Input DDR4 (32bit) DDR4 – 2GB HP Bank CH[2:0] Connector (Upgradable) 65,66 HDMI Output Connector

1 DP single lane supports up to 1080p resolution. DP line supports up to 4k resolution. 2 CG devices supports Dual ARM Cortex - A53 & Dual ARM Cortex - R5. EG devices supports Quad ARM Cortex - A53, Dual ARM Cortex - R5 & Mali - 400MP2 GPU. EV devices supports Quad ARM Cortex - A53, Dual ARM Cortex - R5, Mali - 400MP2 GPU & H.264/H.265 VCU. ³ SYSMONE4 supports 10bit 200KSPS ADC and supports upto 17 Analog Inputs (one dedicated Analog input and 16 auxiliary analog input from any PL BANK). 4 GTH Transceiver block is supported in ZU4 & ZU5 MPSoC with data rates up to 12.5Gb/s. GTH transceiver block is not supported in Zu2 & Zu3 MPSoC. “ “ This symbol indicates Hardware assembly options available in the board and by default which option is supported. Contact iWave to support other assembly option.

3 NEW i.MX8 Quad MAX/Quad Plus Pico ITX SBC Single Board Computer iW-RainboW-G27S HIGHLIGHTS Dual Complex Core System: Complex 1: 4 x Cortex-A53 @ 1.2 GHz Complex 2: 2 x Cortex-A72 @ 1.8 GHz 2 x Cortex M4F @ 264MHz for advanced system control 4K H.265 decode & 1080p h.264 enc/dec capable VPU Enhanced Vision Capabilities (via GPU) IEEE 802.11a/b/g/n/ac/ax* Wi-Fi & Bluetooth 5.0 Dual 1000/100/10 Mbps Ethernet Up to 8GB LPDDR4 memory -40 °C to +85 °C Operation 10+ years long term support

SPECIFICATIONS CPU: i.MX8 QM/QP/DM Processor 1 Expansion Connector 2: i.MX8QuadMax: 2 x Cortex-A72, 4 x Cortex-A53 / 4 lane MIPI CSI x 1 2 x Cortex- M4F 4 lane LVDS x 2 i.MX8QuadPlus: 1 x Cortex-A72, 4 x Cortex-A53 / MIPI CSI I2C x 1 Port 2 x Cortex- M4F Memory: PWM x1 Port LPDDR4 - 4GB (Expandable up to 8GB)2,3 SPI x 1 Port eMMC Flash - 16GB (Expandable to 128GB)3 M41 UART x 1 Port Micro SD Slot Expansion Connector 3: Network & Communication: 4 lane MIPI CSI x 1 Gigabit Ethernet PHY Transceiver with 4 lane MIPI DSI x 1 RJ45 Magjack Connector x 2 SAI x 1 Port USB3.0 High Speed Hub through dual stack QSPI x 1 Port Type - A Connector DMA_I2C x 1 Port APPLICATIONS USB 2.0 OTG port through - micro AB Receptacle MIPI CSI I2C x 1 Port Connector CAN x 1 Port IEEE 802.11 a/b/g/n/ac/ax* Wi-Fi & BT 5.0 Remote Energy Management M40UART x 1 Port Rs232 X 1 Header UART x 1 Port Intelligent Edge CAN x 1 Header Operating System: M.2 Connector Key B: PCIe x 2 Augmented & virtual Reality Linux 4.14.98, Android Pie 9.0.0, SATA x 1 4K Media Streaming QNX 7.0.0, Ubuntu 18.04.3 LTS* USB 2.0 x 1, USB 3.0 x 1 Audio/Video Features: I2S x 1, I2C x 1 Industrial Automation HDMI output through HDMI (TypeA) connector 4 HSIC x 1 HDMI Input through micro HDMI (Type D) Connector Automative eCockpit Nano SIM Connector 4 Medical Device 40Pin eDP Display Connector (Optional) Miscellaneous Interfaces: I2S Audio Codec Debug UART Header 3.5mm Audio IN/OUT JTAG Header Expansion Connector 1: Tamper Header 4 lane MIPI DSI x 1 RTC Battery Connector 4 lane LVDS x 2 Power Supply: CAN/SPDIF x1 Port 12V, 2A input through External Adaptor DMA_I2C x 1 Port Operating Temperature:-40 °C to +85 °C SPI x 1 Port Form Factor: 100mm X 72mm

1 There are 2 Congurations of i.MX8 Processor, hence in this document i.MX8 is used to represent either i.MX8QM or i,MX8QP based on the part number. 2 The i.MX8 can support up to 16GB RAM but considering available LPDDR4 conguration, it can support 8GB by using two 4GB chips.If 8GB (64GB) chips are available then 16GB DDP can be supported. 3 Memory Size will differ based on iWave’s product part number. 4 This i.MX8 support HDMI or eDP through some pins, hence anyone can be supported at a time based on the SBC part number.

4 i.MX8 Quad MAX/Quad Plus Pico ITX SBC - BLOCK DIAGRAM

12V On -Board 12V Power Jack LPDDR4 (64bit) LPDDR4 - 4GB DDR CH0 To On -board Regulators (Upgradable) DDR CH1 Peripherals 3V RTC Coin cell PMIC PMIC Interface Gigabit Header MMC(8bit) eMMC – 16GB RGMII Gigabit Ethernet eMMC0 ENET0 Ethernet Left Conn (Upgradable) PHY SD1 x 1 Gigabit RJ45 Conn Micro SD Dual Ganged SDHC1 RGMII Gigabit Ethernet Ethernet Connector ENET1 PHY Right Conn SD2 x 1 SDHC2 Antenna Conn. USB Device/OTG x 1 UART x1 USB OTG1 USB 2.0 Conn Wi -Fi & BT UART1 Antenna Conn. Module with ESAI x1 Antenna ESAI 0 USB OTG2 USB2.0 Top Nano SIM Conn. PCIe x 1 USB3.0 USB3.0 HUB USB 3.0 Stack PCIe1 2 SIM USB_SS3 USB3.0 (3ports ) Host x 2 Bottom PCIe x 1 USB2.0 x 1

PCIe/USB3.0 SW USB3.0 x 1 HDMI RX HDMI RX x1 Micro HDMI Conn

SATA x 1 2 PCIe2/SATA 1 HDMI TX/ eDP HDMI TX M.2 Module PCIe/SATA SW PCIe x 1 HDMI TX/eDP HDMI Flag Conn Connector PCIe0 eDP key B HSIC x 1 USB_HSIC 40 Pins eDP Conn SAI x 1 SAI0 MIPI DSI x1 4lanes USB2.0 x 1 MIPI DSI0 MIPI DSI0 I2C0 MIPI DSI I2C x1 I2C x 1 i.MX8 QM/QP LVDS x 2 Channel LVDS1_CH0 DSI x 4lanes LVDS I2C x 1 60 pins MIPI DSI1 LVDS1_CH1 Expansion I2C x 1 SPDIF/CAN1 x 1 Header -1 CSI x 4lanes LVDS1 I2C0 SPDIF/FLEXCAN1 3 CSI I2C x 1 MIPI CSI1 MIPI_CSI1_I2C0 SPI3 SPI x 1 UART x 1 UART3 DMA_I2C2 I2C x 1 60 pins DMA_I2C x 1 DMA_I2C1 MIPI CSI x1 4lanes Expansion MIPI CSI0 SAI x 1 4 Header -3 SAI2 MIPI CSI0 I2C0 MIPI CSI I2C x1 CAN x 1 FLEXCAN2 LVDS x 2 Channel GPIOs LVDS0_CH0 60 pins GPIOs LVDS0_CH1 LVDS I2C x 1 Expansion QSPI x 1 LVDS0 I2C0 QSPI1A Header -2 UART/I2C x 1 UART/I2C x 1 M4-0 UART/I2C M4-1 UART/I2C SCU Boot Mode SPI x 1 Boot Mode SW SCU Boot SPI2 Mode CAN x 1 Tamper FLEXCAN0 Tamper Header TAMPER CAN Transceiver CAN Header UART x 1 SAI x 1 Debug UART UART4 SAI1 Header I2C x 1 I2S Audio Codec Audio In/Out Jack SCU UART x 1 DMA_I2C1 20pin Header SCU_UART0 (Optional) JTAG UART x1 RS232 RS232 Header SJC UART0 Transceiver

Notes:

1 Either eDP interface or HDMI TX is supported. By Default HMDI is Supported. 2 PCie0 is connected to Wi-Fi BT Module and M.2 Connector. By default M.2 Connector is supported.

3 Either FLEXCAN1 or SPDIF is supported. BY default FLEXCAN1 is supported

4 SAI2 Receive mode

5 HSIC is optional feature

OS SUPPORT DELIVERABLES OPTIONAL KITS/MODULES CUSTOM DEVELOPMENT Linux 4.14.98 i.MX8 QM/QP Pico ITX SBC Heat Sink BSP Development/OS Porting Android Pie 9.0.0 Board Support Package Industrial Enclosure Custom SOM/Carrier Development QNX 7.0.0 User Manual 12V, 2A Power Adaptor Custom Application/GUI Development Ubuntu 18.04.3 LTS Design Review and Support HMI Solutions

5 i.MX6 Pico-ITX SBC Single Board Computer iW-RainboW-G15S

HIGHLIGHTS ARM Cortex A9 @ 1GHz/800MHz Quad/Dual/Dual Lite/Solo core 100mmx72mm Pico-ITX form-factor Single Board Computer HD 1080p encode and decode HD video playback in 2D/3D GPU Technical and quick customization support 10+ years long term support

APPLICATIONS SPECIFICATIONS CPU: Debug & Status Indication Support: Home Energy Management i.MX6 Q/D/DL/S @1GHz/800MHz ARM-Cortex-A9 Micro USB Debug Port Systems PMIC: JTAG Header MMPF0100 4 Pos User Dip Switch & Status LEDs Ultra Portable Devices RAM: Expansion Header-84 Pin: 1GB DDR3 for Q/D/DL (Expandable up to 4GB*) MIPI DSI Intelligent Industrial Control 512MB DDR3 for Solo (Expandable up to 2GB*) SPI Interface-1No Storage: CSI0 Camera interface Systems On-board Micro SD Slot CAN2 Interface Standard SD/SDIO Slot UART- 3 Nos Industrial Human-Machine SPI Flash 16Mbit I2C- 3 Nos 4GB eMMC Flash GPIOs interface Optional SATA 7 Pin Connector* LVDS1 Interface Communication Interfaces: Optional MLB interface* Portable Medical Devices 10/100/1000 Mbps Ethernet Miscellaneous: Half mini PCIe card Connector RTC Controller* Dual USB Host Connector Operating Temperature: Micro USB OTG Connector -20O C to +85O C CAN Transceiver - 1 Port Power Input: Audio & Video Interfaces: 5V, 2A AC97 Audio Codec with Audio Out Jack & Audio In Header Form Factor: Pico-ITX (100mmx72mm) HDMI Port LVDS Connector with Backlight Support [LVDS0] Operating Systems: 4 Wire Resistive Touch Controller Linux 3.14.38 8 Bit CMOS Camera Connector [CSI1] Android 5.0 Lollipop 2 Lanes MIPI Camera Connector WEC7 *Optional features are not supported by default

6 i.MX6 Pico-ITX SBC BLOCK DIAGRAM

i.MX6 Q/D/DL/S DDR3 RAM (1GB/512MB) 7 pin SATA eMMC (4GB) Connector* eCSPI1 SPI Flash (16MB) eCSPI1

I2C1 I2C1

Audio Out Jack Audio In Header

+ MLB 84pin Expansion Header LVDS1

I2C x 3 I2C 1,2,3 User Dip 5V I2C RTC Controller* I2C

JTAG JTAG

OS SUPPORT DELIVERABLES OPTIONAL KITS/MODULES CUSTOM DEVELOPMENT Linux 3.14.38 i.MX6 Pico-ITX SBC Pico ITX Enclosure BSP Development/OS Porting Android 5.0 Lollipop Board Support Packages Camera Module Custom Application/GUI Development WEC 7 User Manual Power Module Design Review and Support 5V, 2A Power Adaptor HMI Solutions

7 NEW ZU19/ZU17/ZU11 Zynq UltraScale+ MPSoC SOM System On Module iW-RainboW-G35M-SM

HIGHLIGHTS Quad Cortex-A53 @ 1.5 GHz Dual cortex R5, ARM Mali 400 MP2 16 Channels GTY Transceivers up to 32.75Gbps 32 Channels GTH Transceivers up to 16.3Gbps 4 Channels GTR Transceivers up to 6Gbps Logic Cells up to 1143K Industrial grade availability 10+ Years long term support APPLICATIONS Video Surveillance Cloud Computing Artificial Intelligence/Machine Learning 5G Wireless High Precision Test Instrument Data Center

DEVELOPMENT PLATFORM SPECIFICATIONS

SoC: 48 LVDS/96 SE/32 ADC from HP BANKs Xilinx Zynq US+ EG ZU19/ZU17/ZU11 46 SE/16 ADC from HD BANKs Quad Cortex [email protected] Zynq Ultrascale+ MPSoC PS Interfaces: Dual Cortex R5 MPCore upto 600MHz Gigabit Ethernet x 1 Port ARM Mali 400MP2 USB 2.0 OTG x 1 Port Memory: SPI x 1 Port 4GB DDR4 for PS with ECC CAN x 2 Ports 4GB DDR4 (64 Bit) for PL from BANK 64,65,66 I2C x 2 Ports 4GB DDR4 (64 Bit) for PL from BANK 69,70,71 SD x 1 Port 8GB eMMC Flash (Expandable to 128GB) Debug UART On SOM Features: UART x 1 Port 10/100/1000 Ethernet PHY for PS JTAG USB2.0 OTG Transceiver for PS GEM 3 or USB1 2.0 x 1 Port MAX10 FPGA for PL PS Transceivers x 4 @ 6Gbps JTAG Header OS Support: Linux, QNX, Ubuntu FAN Header Power Supply: Dual Board to Board Connector Interfaces: 5V through Board to Board Connector 2 Zynq Ultrascale+ MPSoC PL Interfaces: Temperature: -40° C to +85° C (Industrial) PL GTY Transceivers x 16 @ 32.7Gbps 0° C to 70° C (Commercial) PL GTY Transceivers x 32 @16.3Gbps Form Factor: 110mm x 75mm

8 ZU19/17/11 Zynq Ultrascale+ MPSoC SOM Block Diagram

Processing System (PS) 5V Power to Power Power IN Quad Core ARM Cortex-A53, (Optional) Peripherals Regulators Dual Core Arm Cortex-R5, Mali-400MP2 ULPI USB OTG DDR4 (64bit) USB2.0 DDR4 – 4GB USB0 PHY (Upgradable) DDR DDR4 ECC (8bit) Memory RGMII Ethernet Gigabit Ethernet DDR4 (ECC) Controller GEM0 PHY SD (4bit) x 1 eMMC – 8GB eMMC (8bit) SD1 (Upgradable) SD0 SPI x 1 SPI1 ULPI x 1 or RGMII x 1 GEM3/USB1 I2C x 2 I2C0, I2C1 CAN x 2 Debug UART CAN0, CAN1 UART0 1 High Speed Transceiver x 2 UART x 1 Board to Board UART1 High Speed 1 PS GTR(4 TXVR) High Speed Transceiver x 2 JTAG Connector2 Bank 505 (240Pin) Board to Board PS JTAG 5 High Speed M10 JTAG Zynq Ultrascale+ JTAG Connector1 ZU11EG/ZU17EG/ZU19EG Header (240Pin) Programmable Logic (PL) High Speed PS GTR 4 1 FPGA IOs (22SE/8ADC) FPGA IOs Transceiver x 2 Bank 93 GTH Transceiver 2 4 High Speed Transceiver (4 Channels) FPGA IOs (24SE/8ADC) Bank 94 Bank 227 4

Transceiver ADC Inputs SYSMONE4 2 Bank High Speed Transceiver (12 Channels) 224, GTH 4 FPGA IOs (24LVDS/48SE/16ADC) 225, Bank 67 226 4 Board to Board FPGA IOs (24LVDS/48SE/16ADC) Bank 68 High Speed Transceiver 2 Bank Connector4 High Speed Transceiver (8 Channels) 228, GTH Bank DDR4 (64bit) (80Pin) 229, 64,65,66 DDR4 - 4GB 5V 2 FAN Header

High Speed Transceiver (8 Channels) 230, 231 IOs FPGA Bank DDR4 (64bit) 69,70,71 DDR4 - 4GB

Board to Board Transceiver High Speed 3 Bank

128, GTY High Speed Transceiver (16 Channels) 5 Connector3 129, FPGA IOs (48) M10 JTAG 130, Bank 90,91 MAX10 (240Pin) 131, FPGA

Notes: 1 PS GTR Transceiver supports data rates up to 6Gb/s and can be configured as PCIe/SATA/USB3.0/DisplayPort/Ethernet SGMII. 2 PL GTH Transceiver supports data rates up to 16.3Gb/s. 3 PL GTY Transceiver supports data rates up to 32.75Gb/s. 4 SYSMONE4 supports 10bit 200KSPS ADC and supports upto 17 Analog Inputs (One dedicated Analog input and 16 auxiliary analog input from any PL BANKs) 5 The MAX10 JTAG Signals and the PS JTAG Signals are connected to JTAG Connector in JTAG Chain mode.

OS SUPPORT DELIVERABLES OPTIONAL KITS/MODULES CUSTOM DEVELOPMENT Linux 4.14.0 Zynq Ultrascale+ MPSoC Module Zynq Ultrascale+ Development Kit BSP Development/OS Porting Ubuntu 16.04.6 LTS Board Support Package Heat Sink Custom SOM/Carrier Development QNX 7.0.0 User Manual Custom Application/GUI Development Design Review and Support

9 ZU7/ZU5/ZU4 Zynq Ultrascale+ MPSoC SOM System On Module iW-RainboW-G30M

HIGHLIGHTS APPLICATIONS Quad/Dual Cortex-A53 @ upto 1.5 GHz Industrial Motor Control Dual cortex R5,ARM Mali 400 MP2 Sensor Fusion 4GB DDR4 with ECC for PS 1GB DDR4 for PL ADAS/Embedded Vision Up to 504K Logic Cells Industrial IoT H.264/H.265 4K Video encode/decode 16 Channels GTH Transceivers upto 16.3Gbps Cloud Computing 4 Channels GTR Transceivers upto 6Gbps Aerospace PCIe, USB3.0, SATA 3.1 Display Port 24 LVDS Pairs/ 48 SE IOs from HP BANKs Machine Vision 46 SE IOs from HD Banks 10+ Years long term support

DEVELOPMENT PLATFORM SPECIFICATIONS

SoC: Xilinx Zynq Ultrascale+ ZU4/ZU5/ZU7 Zynq Ultrascale+ MPSoC PS Interfaces: Quad/Dual Cortex A53 @ 1.5GHz Gigabit Ethernet x 1 Port Dual Cortex R5,ARM Mali 400 MP2 USB OTG x 1 Port H.265, H.264 Video Codecs SPI x 1Port Memory: CAN x 2 Ports 4GB DDR4 with ECC for PS I2C x 2 Ports 1GB DDR4 for PL SD x 1 Port 8GB eMMC Flash(Expandable) Debug UART On SOM Features: UART x 1 Port 10/100/1000 Ethernet PHY for PS JTAG USB2.0 OTG Transceiver for PS GEM 3 or USB 2.0 x 1 Port Headers: PS Transceivers x 4 @ 6Gbps JTAG OS Support: Linux, QNX 7.0.0,Ubuntu FAN Power Supply: Dual Board to Board Connector Interfaces: 5V through Board to Board connector 2 Zynq Ultrascale+ MPSoC PL Interfaces: Temperature: PL Transceivers x 16 @ 16.3 Gbps -40°C to +85°C (Industrial grade) 24 LVDS/48 SE from HP BANKs & 46 SE from 0°C to 70°C (Commercial) HD Banks Form Factor: 95mm x 75mm

10 ZU7/ZU5/ZU4 Zynq Ultrascale+ MPSoC SOM Block Diagram

5V Power IN Processing System (PS) Power to Power Regulators (Optional) Quad/Dual ARM Cortex-A53, Peripherals Dual Cortex™-R5, 400MP2,VCU Mali- USB OTG DDR4 – 4GB DDR4 (64bit) ULPI USB2.0 USB0 (Upgradable) DDR PHY Memory DDR4 ECC (8bit) DDR4 (ECC) Controller RGMII GEM0 Ethernet Gigabit Ethernet PHY eMMC – 8GB eMMC (8bit) (Upgradable) SD0 SD (4bit) x 1 SD1 SPI x 1 ULPI X 1 or RGMII X 1 SPI0, SPI1 GEM3/USB1 Board to I2C x 2 I2C0, I2C1 Board CAN x 2 CAN0, CAN1 Debug UART High Speed UART0 Connector2 1 UART x 1 (240Pin) High Speed Transceiver x 2 PS GTR(4 TXVR) UART1 1 JTAG High Speed Transceiver x 2 PS JTAG Bank 505

Board to Zynq Ultrascale+ JTAG Board 3 Header High Speed ZU4/ZU5/ZU7 - CG/EG/EV Connector1 High Speed PS GTR Programmable Logic (PL) 1 Transceiver X 2 (240Pin) 2 High Speed Transceiver (4 Channels) GTH Transceiver GTH Transceiver 2 Bank 224 High Speed Transceiver (4 Channels) High Speed Transceiver (4 Channels) 2 Bank 227 Bank 225 ADC Inputs 4 2 High Speed Transceiver (4 Channels) SYSMONE4 Bank 226 4 FPGA IOs (24LVDS/48SE/16ADC) Bank 64 4 4 FPGA IOs (22SE/8ADC) FPGA IOs FPGA IOs (24LVDS/48SE/16ADC) Bank 45 Bank 66 4

FPGA IOs (24SE/8ADC) IOs FPGA DDR4 (16bit) Bank 46 Bank 65 DDR4-1GB 5V FAN Header

Note 1: PS GTR Transceiver supports data rates up to 6Gb/s and can be congured as PCIe/SATA3.1/USB3.0/DisplayPort/Ethernet SGMII. Note 2: PL GTH Transceiver supports data rates up to 16.3Gb/s Note 3: CG devices supports Dual ARM Cortex-A53 & Dual ARM Cortex-R5. EG devices supports Quad ARM Cortex-A53, Dual ARM Cortex-R5 & Mali-400MP2 GPU. EV devices supports Quad ARM Cortex-A53,Dual ARM Cortex-R5 , Mali-400MP2 GPU & H.264/H.265 VCU. Note 4: SYSMONE4 supports 10bit 200KSPS ADC and supports upto 17 Analog Inputs (One dedicated Analog input and 16 auxiliary analog input from any PL BANKs).

OS SUPPORT DELIVERABLES OPTIONAL KITS/MODULES CUSTOM DEVELOPMENT Linux 4.14.0 Zynq Ultrascale+ MPSoC Module Zynq Ultrascale+ Development Kit BSP Development/OS Porting Ubuntu 16.04.6 LTS Board Support Package Heat Sink QNX 7.0.0 Custom SOM/Carrier Development User Manual Custom Application/GUI Development Design Review and Support HMI Solutions

11 Arria 10 SoC/FPGA SOM System On Module iW-RainboW-G24M

HIGHLIGHTS APPLICATIONS Arria 10 SoC & FPGA device Compatibility Test and measurement equipment SX270,SX320,SX480,SX570,SX660 Control and intelligence equipment GX270,GX320,GX480,GX570,GX660 Diagnostic medical imaging Gx900, GX1150 equipment 4GB DDR4 for FPGA 24 high speed transceivers @ 17.4Gbps Wireless infrastructure equipment 48/96 LVDS from BANK 3B & 3C Compute and storage equipment 93 SE from BANK 2A & 3A Broadcast and distribution Industrial Grade Operation equipment 10+ Years long term support Software Defined Radio (SDR)

DEVELOPMENT PLATFORM SPECIFICATIONS

SOC :Arria 10 SoC/ FPGA Dual 240 Pin Board to Board Connector: Dual Core, Cortex - A9 CPU @ 1.5GHz Arria10 SoC HPS IO interfaces: FPGA Fabric 270 K to 1.1M Gigabit Ethernet x 1 Port Memory USB 2.0 OTG x 1 Port 2GB DDR4 with ECC for HPS SD (4bit) x 1 Port (optional) 4GB DDR4 for FPGA SPI x 1 Port Micro SD for HPS boot I2C x 1 Port 8GB eMMC Flash for HPS boot (Optional) HPS Dedicated UART Console QSPI Flash for FPGA GPIOs-14 Nos Communication: Arria10 SoC FPGA IO interfaces: 10/100/100 Ethernet PHY For HPS 24 high - Speed Transceivers USB2.0 transceiver for HPS 48/96 LVDS from BANK 3B & 3C Power Supply: 93 SE from BANK 2A & 3A 5V through SOM B2B connector 2 Headers: HPS/FPGA JTAG, FPGA AS headers Temperature support: -40°C to +85°C Industrial, OS Support: Linux 4.9.78 0°C to +70°C Commercial Form Factor: 95mm x 75mm

Note1: In Arria10 SoC/FPGA SOM, these interfaces can be supported only if Arria10 SoC family devices which supports Hard Processor System (HPS) are used. Note2: In Arria10 SoC/FPGA SOM, if Arria10 SoC family device is not used and FPGA family device is used, then also 32bit DDR4 can be supported from FPGA fabric.

12 Arria 10 SoC/FPGA SOM BLOCK DIAGRAM

5V Power IN Power Power to (Optional) Regulators Hard Processor System Peripherals (Dual ARM Cortex TM- A9) UTMI USB2.0 USB OTG DDR4 - 2GB DDR4 (32bit) USB1 PHY (Upgradable) SDRAM Gigabit RGMII Controller EMAC1 Ethernet Ethernet DDR4 ECC (8bit) PHY DDR4 (ECC) (Bank 2J & 2k)

Debug UART HPS-D-UART MicroSD SD (4bit) Connector SDMMC

SPI SPIM0 eMMC - 8GB eMMC SOM Board eMMC I2C0 (Optional) I2C0 to Board Connector2 GPIOs (Upto 14nos) (240pin) GPIOs

AS Interface (Optional)

Arria 10 SX/GX High Speed Transceiver (2 Channels from Bank 1E)

FPGA Transceiver PH Transceiver High Speed Transceiver (6 Channels) Transceiver PHY High Speed Transceiver (6 Channels) Bank 1C SOM Board Bank 1F High Speed Transceiver (6 Channels) to Board Bank 1D Connector1 FPGA IOs(24LVDS/48SE) High Speed Transceiver (4 Channels) (240pin) Bank 3B

Bank 1E Y FPGA IOs(24LVDS/48SE) Bank 3C

FPGA IOs(46SE) FPGA IOs Bank 2A FPGA IOs Bank 3D, DDR4 (64bit) FPGA IOs(47SE) 3E,3F DDR4 - 4GB Bank 3A FPGA/HPS JTAG FPGA AS AS Interface JTAG Header Active Serial JTAG Header 5V Configuration FAN Header Flash-256MB

Note: 1.HPS (Hard Processing System) is supported only in Arria10 SX devices. 2.All IOs in SOM Expansion connectors are 1.8V tolerant Ios. Bank 3B, 3C, 3A supports variable IO level setting from PMIC (1.8V, 1.5V, 1.35V, 1.2V). 3.Each FPGA IO Bank (2A,3A,3B,3C) which goes to Expansion connectors support two General Purpose Clock Input (1 in 2A) & two General Purpose Clock Output (LVDS/SE). 4.Since 3D,3E & 3F banks are available only in some version of Arria10 parts, FPGA DDR4 (64bit) can be supported only where these banks supported devices are used.

OS SUPPORT DELIVERABLES OPTIONAL KITS/MODULES CUSTOM DEVELOPMENT

Linux 4.9.78 Arria 10 SoC/FPGA SOM Arria 10 SoC/FPGA Development Kit BSP Development/OS Porting Board Support Package Heat Sink Custom SOM/Carrier Development User Manual Custom RTL Development Design Review and Support

13 Zynq 7000 SODIMM SOM System On Module iW-RainboW-G28M-SM

HIGHLIGHTS APPLICATIONS Up to Dual Cortex A9 @ 866MHz Industrial automation Up to 85K FPGA logic cells Industrial equipments Up to 121 FPGA IOs Machine Vison 802.11n Wi-Fi + BLE 4.0 Module Control & measurement Industrial grade availability Scientific Instruments and Support for custom RTL development Medical Instruments. Linux BSP support 10+ Years long term support

DEVELOPMENT PLATFROM SPECIFICATIONS

SoC: Xilinx Zynq 7000 SoC SODIMM Edge Connector Interfaces: Single/Dual Cortex A9 @ upto 866MHz Zynq SoC PS Interfaces: Up to 85K logic cells Gigabit Ethernet x 1 Port Compatible devices: Z-7007S, Z-7014S, Z-7010, USB 2.0 OTG x 1 Port Z-7020 (CLG400 package) SD (4bit) x 1 Port Memory: Debug UART 512MB DDR3 (Expandable to 1GB) JTAG Port 512MB NAND Flash Zynq SoC PL Interfaces: QSPI Flash(Optional) 60LVDS/120 SE FPGA IOs Micro SD Slot /eMMC (Optional) OS Support: Linux 4.9.0 On SOM features: Power Supply: PMIC with RTC 3.3V through SOM edge connector Gigabit Ethernet Transceiver Temperature support: USB2.0 Transceiver -40°C to +85°C 802.11n Wi-Fi + BLE 4.0 Module (Optional) Form Factor: 67.6mm x37mm

14 Zynq 7000 SODIMM SOM Block Diagram

Processor System (PS) 3.3V Power to Single/Dual ARM® PMIC Peripherals (with RTC) VRTC (3V) Cortex™- A9

I2C

B I2C0 A USB OTG N ULPI DDR3 (32bit) USB2.0 DDR3 DDR3 K USB0 Controller 5 512MB 0 PHY 2

(Upgradable) B A

N RGMII Gigabit Ethernet

K Ethernet

5 ENET0 B 0

A PHY 1 NAND NAND/ N NAND Flash K QSPI & 5 Debug UART (Oponal) 0 UART0 SD1 0 SD (Oponal) QSPI SD0 QSPI 2MB SODIMM (Upgradable) Edge Connector SD (4bit) eMMC-8GB Zynq 7000 SoC (200Pin) (Upgradable) (Z-7007S, Z-7014S, WIFI/BT (Oponal) MicroSD Z-7010,Z-7020) (Oponal)

Programmable Logic (PL) FPGA IOs (48 SE/23 LVDS/16ADC) BANK35 FPGA IOs (48 SE/22 LVDS) BANK34

FPGA IOs (25 SE/12 LVDS) BANK13 JTAG JTAG

Note: •In PL, Bank13 is available only in Z-7014S & Z-7020 SoC. •In PS, NAND Flash or QSPI Flash can be used as boot ash. •In PS, NAND and QSPI, SD1 signals are multiplexed in the same pins and so either NAND or QSPI & MicroSD/eMMC can be used at a time.

OS SUPPORT DELIVERABLES OPTIONAL KITS/MODULES CUSTOM DEVELOPMENT

Linux 4.9.0 Zynq-7000 SODIMM SOM Storage FPGA IP Cores, Support for custom RTL development Board Support Package Video Processing FPGA IP Cores, BSP Development/OS Porting User Manual Interface & Peripherals FPGA IP Cores Custom SOM/Carrier Development Zynq-7000 SODIMM Development Kit Custom Application/GUI Development Heat Spreader/Heat Sink Design Review and Support HMI Solutions

15 i.MX8 QM/QP SMARC SOM System On Module iW-RainboW-G27M-SC

HIGHLIGHTS APPLICATIONS Dual Complex Core System: Industrial Control Systems Complex 1: 4 x Cortex-A53 @ 1.2 GHZ Industrial HMI Complex 2: 2 x Cortex-A72 @ 1.8 GHZ Ultra-Portable Devices

2 x Cortex-M4F @ 264 MHZ Portable Medical Devices 4K Digital Signage 4K H.265 decode & 1080p H.264 Media streaming enc/dec capable VPU Augmented & Virtual Reality Enhanced Vision Capabilities (via GP) Drones Dual 1000/100/10 Mbps Ethernet Video analytics IEEE 802.11 a/b/g/n/ac/ax* Wi-Fi & BT 5.0 Module SMARC R2.0 compatible 10+ Years long term support

DEVELOPMENT PLATFORM SPECIFICATIONS

SOC: i.MX8QuadMax/QuadPlus LVDS/MIPI_DSI x 2 Channels Dual Complex Core System: HDMI/DP Transmitter x 1 Port i.MX8 QM : 4 x Cortex-A53 @ 1.2 GHz SSI/I2S (Audio Interface) x 2 Ports i.MX8 QP : 2 x Cortex-A72 @ 1.8 GHz Debug UART 2 x Cortex-M4F @ 264 MHz Data UART (with CTS & RTS) x 1 Port ARM v8 64-bit instruction capability Data UART (without CTS & RTS) x 1 Port Integrated Full Chip Hardware Virtualization CAN x 2 Ports 16-Shader 3D (Vec4) SPI x 2 Ports 4K H.265 decode & 1080p h.264 enc/dec I2C x 2 Ports Memory: GPIO, Control & Status Signals 1,2 LPDDR4 - Up to 8GB Expansion Connector interfaces: 3 eMMC Flash - 16GB (Expandable to 256GB) LVDS1 x 2 Channels Micro SD slot (Optional) MLB x 1 Channel Octa SPI Flash - (Optional) HDMI Receiver X 1 Port (Optional) Communication: CAN x 1 port Gigabit Ethernet PHY Transceiver x 2 SPDIF x 1 port USB 3.0 High Speed 4-Port Hub ESAI x 1 port IEEE 802.11 a/b/g/n/ac/ax* Wi-Fi & BT 5.0 GPIOs SMARC Edge Connector Interfaces: OS Support: Linux 4.14.98 & Android Gigabit Ethernet x 2 Ports Pie 9.0.0, QNX 7.0.0, Ubuntu 18.04.3 LTS* USB 3.0 Host x 2 Ports Temperature support: PCIe x 2 Ports -40°C to +85°C Industrial SATA x 1 Port 0°C to +70°C Commercial USB 2.0 OTG x 1 Port Form Factor: USB 2.0 Host x 2 Ports 82mm x 50mm, SMARC R2.0 compatible SD (4bit) x 1 Port REACH2 & RoHS Compliant

16 i.MX8 QM/QP SMARC SOM Block Diagram

Gigabit LPDDR4 (64bit) RGMII Gigabit Ethernet LPDDR4 - 4GB DDR CH0 ENET0 (Upgradable) DDR CH1 Ethernet PHY Gigabit eMMC – 16GB MMC(8bit) RGMII Gigabit Ethernet eMMC0 ENET1 (Upgradable) Ethernet PHY W_PCIe PCIe1 x 1 OctaSPI Flash Octa SPI X 1 QSPI0A PCIe0, PCIe1 PCIe0 x 1 (Optional) QSPIOB SATA x 1 PCIe2/SATA

Antenna Conn. UART 2 UART1 USB Device/OTG x 1 Wi-Fi & BT USB OTG1 W_PCIe Antenna Conn. Module USB2.0 USB OTG2 USB3.0 HUB SD (4bit) USB3.0 Micro SD SDHC21 USB3.0 (4ports) Host x 4 Connector USB_SS3 (Optional) SD x 1 i.MX8 SDHC1 SPDIF/DMA_I2C2* X 1 SPDIF/ 314 Pins DMA_I2C2* QM/QP LVDS0_CH04 LVDS0 x 2 Channel 4 SMARC Edge ESAI x 1 LVDS0_CH1LVDS1 Connector ESAI1 MIPI DSI0 MIPI DSI x 2 4 LVDS1 x 2 Channel LVDS1_CH0 MIPI DSI1 DP x 1 LVDS1_CH1 HDMI TX 5 HDMI x 1 HDMI RX x 1 MIPI CSI0, 100Pin HDMI RX MIPI CSI X 2 (1x2lane, 1x4lane) Expansion MIPI CSI1 MIPI Camera x 1 (2lane) Connector MPI CSI0 MIPI_CSI0_I2C0 CAM I2C X 2 CAN x 1 MIPI_CSI1_I2C0 FLEXCAN2 FLEXCAN0 CAN X 2 MLB x 1 FLEXCAN1 MLB SPI X 2 SPI3, SPI2/QSPI1A GPIOs I2S X 2 GPIOs SAI0 SAI1 DMA_I2C1 I2C X 1 SCU_UART0, UART x 2 M41/UART4 3 2 UART0,M40/UART1, 20Pin Header UART X 4 (Optional) JTAG UART3, UART4 SJC GPIOs GPIOs

Note: 1.JODY - W2 Wi-Fi is supported by using SDHC2interface,hence On SOM microSD will be an optional feature.PCIe based Wi-Fi can be supported only with JODY - W3 modules. 2.In default Configuration UART1 interface of i.MX8 is connected to on SOM Bluetooth module.When UART1 is optional near edge connector, M40UART0 can be supported at SMARC Edge Connector. 3.Either M41UART0 or UART4 can be supported. 4.Either LVDS0_CH0 or MIPI DSI1 can be supported.In default Configuration MIPI DSI 0 & 1 are supported. 5.Either HDMI or Display Port can be supported.In default Configuration HDMI is supported. * Optional

OS SUPPORT DELIVERABLES OPTIONAL KITS/MODULES CUSTOM DEVELOPMENT Linux 4.14.98 i.MX8QM/QP SMARC Module i.MX8QM Development Kit BSP Development/OS Porting Android Pie 9.0.0 Board Support Package 5.5” Cap touch Display Custom SOM/Carrier Development QNX 7.0.0 User Manual Heat Sink Custom Application/GUI Development Ubuntu 18.04.3 LTS Camera Module Design Review and Support Power Adaptor HMI Solutions

17 i.MX8M Q/QL/D SMARC SOM System On Module iW-RainboW-G33M-SC

HIGHLIGHTS APPLICATIONS 4 x Cortex-A53 @ upto 1.5 GHz Digital Media Adaptors HD Digital Signage 1 x Cortex-M4F @ 266 MHZ Industrial HMI OpenCL™ 1.2 (via GPU) Building Automation Dual 1000/100/10 Mbps Ethernet Imaging & Scanning (AVB support on one port) Audio/Video Streaming IEEE 802.11 a/b/g/n/ac/ax* Wi-Fi & devices BT 5.0 Module Machine Vision SMARC R2.0 compatible 10+ Years long term support

DEVELOPMENT PLATFORM SPECIFICATIONS SoC: i.MX8M Q/QL/D SMARC Edge Connector Interfaces: SoC: i.MX8M Quad,QuadLite,Dual Gigabit Ethernet x 2 Ports (AVB support on one port) SMARC Edge Connector Interfaces: i.MX8M Quad: 4 x Cortex-A53,1 x Cortex-M4, GPU & USB3.0 OTG x 1 Port (including 2.0 OTG) Gigabit Ethernet x 2 Ports (AVB support VPU Decode on one port) USB3.0 Host x 1 Port i.MX8M QuadLite:4 x Cortex-A53 & USB3.0 OTG x 1 Port (including 2.0 OTG) USB 2.0 Host x 4 Port 1 x Cortex-M4USB3.0 & GPU Host x 1 Port i.MX8M Dual: 2USB x Cortex-A53, 2.0 Host x 4 Port 1 x Cortex-M4, GPU & VPU PCIe x 1 Port Decode PCIe x 1 Port SD (4bit) x 1 Port (Optional) 1xCortex-M4F SD@ (4bit) 266 x 1MHz Port (Optional) for advanced system control MIPI DSI x 1 Port MIPI DSI x 1 Port 64-bit Armv8-A architectureHDMI/DP Transmitter x 1 Port HDMI/DP Transmitter x 1 Port MIPI CSI0 (2lane) x 1 Port 4Kp60 (h.265, VP9),MIPI CSI1 4Kp30 (4lane) (h.264), x 1 Port 1080p60 (MPEG2, MIPI CSI0 (2lane) x 1 Port MPEG4p2, Vc1,VP8,RV9,AVS/AVS+,h.263,DiVX)I2S (Audio Interface) x 2 Ports VPU decoder MIPI CSI1 (4lane) x 1 Port Debug UART OpenGL® /ES 3.1, OpenGLData UART® 3.0,(with VulkanCTS & RTS) ®1.0 x 1& Port I2S (Audio Interface) x 2 Ports OpenCL™ 1.2 (via DataGPU) UART (without CTS & RTS) x 1 Port Debug UART Memory: I2C x 4 Ports PWM x 3 Ports Data UART (with CTS & RTS) x 1 Port LPDDR4 - 2GB SPI(Expandable x 1 Port to 4GB) Data UART (without CTS & RTS) x 1 Port eMMC Flash - 8GBQSPI (Expandablex 1 Port to 128GB) I2C x 4 Ports 12 GPIO's Control & Status Signals Micro SD slot (Optional)Power Supply: PWM x 3 Ports QSPI Flash - 256MB5V through (Optional) SOM edge connector SPI x 1 Port Form Factor: Communication:82mm x 50mm QSPI x 1 Port Gigabit EthernetTemperature PHY Transceiver Support: x 1 12 GPIO's Control & Status Signals Industrial: -40°C to +85°C PCIe to Ethernet OS controller Support: with PHY x 1 Power Supply: USB 2.0 High-SpeedLinux 4.14.98 4-Port Hub 5V through SOM edge connector Android Pie 9.0.0 IEEE 802.11 a/b/g/n/ac/ax* Wi-Fi & BT 5.0 Form Factor: Expansion Connector Interfaces (Optional): 82mm x 50mm

SAI x 1 port 14 Temperature Support: Industrial: -40°C to +85°C, MIPI CSI0 (2nd 2lane) Commercial: 0°C to +70°C GPIOs OS Support: Linux 4.14.98, Android Pie 9.0.0, REACH & RoHS Complaint: QNX 7.0.0*, Ubuntu 18.04.3 LTS*

18 i.MX8M SMARC SOM Block Diagram

RGMII Gigabit Ethernet LPDDR4 - 2GB LPDDR4 (32bit) Ethernet DDRC ENET PHY (Upgradable) ---- W_PCIe PCIe Gigabit Ethernet MMC (8bit) Ethernet eMMC - 8GB 2 PCIe1 5 (Upgradable) uSDHC1 PHY(OPTIONAL) PCIe x 1 MicroSD ---- PCIe x 1 (Optional) PCIe2 USB3.0 OTG x 1 QSPI Flash QSPI QSPI0A (Optional) USB1 USB2.0 OTG x 1 USB3.0 x 1 I2C RTC Controller I2C1 USB2 ---- USB2.0 x 1 i.MX8M 4Port USB2.0 USB2.0 Host x 4 W_PCIe Antenna Conn. Wi-Fi & BT Quad/Quadlite/Dual HUB SMARC W_SD W_SD Module UART4 3 SD x 1 1 ---- Edge Antenna Conn. uSDHC2 Connector (314Pin) Debug Header UART (Optional) UART1 SPI x 1 eCSPI1 QSPI x 1 JTAG Header JTAG QSPI0B JTAG HDMI (Optional) 4 HDMI/DP DP MIPI CSI0[3:2] MIPI DSI x 1 MIPI CSI0 MIPI DSI 100Pin MIPI CSI x 2 (1 X 2 lane, 1 X 4lane) SAI X 1 Expansion SAI1 MIPI CSI0,1 Connector I2S x 2 SAI2, SAI5 (Optional) GPIOs GPIOs UART1,UART2, UART x 3 UART3 I2C1, I2C2, I2C3, I2C x 4 I2C4 PWM x 2 PWM1, PWM3 GPIO X 12 GPIOs

Note: 1.JODY-W2 Wi-Fi is supported by using uSDHC2 interface, hence SMARC SD will be an optional feature.PCIe based Wi-Fi can be supported only with JODY-W3 Modules. 2.Either eMMC or MicroSD can be supported. In default configuration eMMC supported. 3.In default Configuration UART4 interface of i.MX8 is connected to on SOM Bluetooth module,hence SMARC SER2 will be an optional feature. 4.Either HDMI or Display Port can be supported. In default configuration HDMI is supported. 5.In default configuration PCIe1 interface of i.MX8 is connected to on SOM Ethernet controller, hence Wi-Fi PCIe or SMARC PCIe_B will be an optional feature.

OS SUPPORT DELIVERABLES OPTIONAL KITS/MODULES CUSTOM DEVELOPMENT Linux 4.14.98 i.MX8M SMARC Module i.MX8M Development Kit BSP Development/OS Porting Android Pie 9.0.0 Board Support Package 5.5” Cap touch Display Custom SOM/Carrier Development QNX 7.0.0* User Manual Heat Sink Custom Application/GUI Development Ubuntu 18.04.3 LTS* Camera Module Design Review and Support HMI Solution

* Under Development

19 i.MX8M Mini/Nano SODIMM SOM System On Module iW-RainboW-G34M-SM

HIGHLIGHTS APPLICATIONS Mini : Cortex-A53 @ up to 1.6 GHz Digital Signage Cortex-M4F @ 400 MHz Industrial HMI Nano : Cortex-A53 @ up to 1.5 GHz Home Automation Cortex-M7F @ 750 MHz Audio/Video Streaming 64-bit Armv8-A architecture General Embedded H.265, H.264 Video Decode Automation H.264, Vp8 Video Encode 2D and 3D Graphics Processing Unit Wi-Fi 802.11a/b/g/n/ac + BLE v5.0 Dual 1000/100/10 Mbps Ethernet 10+ Years long term support

DEVELOPMENT PLATFORM SPECIFICATIONS

i.MX8M Mini/Nano: Data UART (with CTS & RTS) x 2 Port Mini : Upto 4 X Cortex-A53 & 1 X Cortex-M4F (One is optional) Nano : Upto 4 X Cortex-A53 & 1 X Cortex-M7F Data UART (without CTS & RTS) x 1 Port PMIC: BD71847MWV SPI x 3 Ports Memory: I2C x 2 Ports 1GB LPDDR4 (Expandable to 4GB) 1,2* PWM x 2 Ports 8GB eMMC Flash (Expandable to 128GB) 2 JTAG, GPIOs 2MB QSPI Flash (Optional) MIPI DSI 4 lane x 1 Channel Micro SD slot (Optional) MIPI CSI 4 lane x 1 Channel Communication: SPDIF x 1 Port Wi-Fi 802.11a/b/g/n/ac + BLE v5.0 Power Supply: Gigabit Ethernet PHY Transceiver x 1 3.3V, 4A Input from SODIMM Edge Connector PCIe to Gigabit Ethernet PHY Transceiver x 13 Form Factor: SODIMM Edge Connector Interfaces: 67.6mm X 37mm Gigabit Ethernet x 2 Port ( One is optional)* Temperature:-40°C to +85°C Industrial, PCIe x 1 Port 3* 0°C to +70°C Commercial USB2.0 OTG x 2 Ports* OS Support: SD (4bit) x 1 Port Linux 4.14.98, Android Pie 9.0.0, SAI/I2S (Audio Interface) x 1 Port QNX 7.0.0*, Ubuntu 18.04.3 LTS* Debug UART REACH & RoHS2 Complaint

1 i.MX8M Mini/Nano CPU Support upto 8GB RAM but considering available LPDDR4 Conguration,Mini SOM can support upto 4GB RAM (32 bit). 2 Memory Size will differ based on iWave’s product part number. 3 PCIe interface is shared between SODIMM Edge & On - SOM PCIe to Ethernet PHY. By default PCIe is connected to SODIMM Edge (PCIe Port). * In SODIMM Edge, compared to Mini, Nano supports USB 2.0 x 1 Port, Gigabit Ethernet x 1 Port and doesn’t support PCIe Port.

20 i.MX8M Mini/Nano SODIMM SOM Block Diagram

LPDDR4 5 RGMII Gigabit Ethernet (32bit/16 bit ) ENET Ethernet LPDDR4-1GB DDRC (Upgradable) PHY

MMC (8bit) 4,5 PCIe PCIe to GBE Gigabit Ethernet eMMC – 8GB uSDHC3 PCIe1 (Upgradable) PHY(Optional)

SD1(4bit) 2 PCIe x 1 MicroSD uSDHC1 (Optional) USB 2.0 OTG x 1 USB1

5 USB 2.0 OTG x 1 USB2 WiFi/BT UART 1 Module UART SD x 1 uSDHC2 I2S/PCM SAI53 SODDIM eCSPI1,eCSPI2 eCSPI x 3 eCSPI3 Edge QSPI Flash i.MX8M QSPI QSPIA JTAG Connector (Optional) Mini/Nano JTAG (200 Pin)

I2C 3 I2S x 1 RTC SAI5 Controller I2C x 2 I2C1 I2C2,I2C3 I2C PMIC PWM x 2 PWM1,PWM2

UART1,UART2,1 UART x 4 UART3,UART4 MIPI DSI [3:0] MIPI DSI MIPI CSI [3:0] MIPI CSI SPDIF x 1 SPDIF

5 SAI x 1 SAI1 GPIOs GPIO

Note: 1. UART1 is shared between SODIMM Edge connector and Bluetooth Module, by default it will be connected to Bluetooth Module 2. uSDHC1 is shared between Wi-Fi module and micro SD connector, by default it will be connected to WI-Fi Module. 3. SAI5 is shared between SODIMM Edge connector and Bluetooth Audio, by default it will be connected to SODIMM Edge. 4. PCIe interface is shared between SODIMM Edge connector and on - SOM PCIe to Ethernet PHY, by default it will be connected to SODIMM Edge. 5. Not supported in i.MX8M Nano

OS SUPPORT DELIVERABLES OPTIONAL KITS/Modules CUSTOM DEVELOPMENT Linux 4.14.98 i.MX8M Mini/Nano SODIMM Module i.MX8M Mini/Nano Development Kit BSP Development/OS Porting Android Pie 9.0.0 Board Support Package Touch Display Custom SOM/Carrier Development QNX 7.0.0* User Manual Heat Sink Custom Application/GUI Development Camera Module Ubuntu 18.04.3 LTS* Design Review and Support HMI Solutions

21 i.MX6 UL/ULL/ULZ SODIMM SOM System On Module iW-RainboW-G18M-SM

HIGHLIGHTS APPLICATIONS Cortex-A7 up to 900MHz Industrial HMI Compatible with Cortex A9 Access Control i.MX6Q/D/S SODIMM SOM Mobile POS Advanced hardware enabled security Secure e-commerce PMIC with DVFS support Energy Management Industrial temperature support IoT gateway available Industrial control & automation Technical and quick customization support Medical & Healthcare equipment 10+ Years long term support White goods and smart appliances

DEVELOPMENT PLATFORM SPECIFICATIONS

CPU: SODIMM Edge Interfaces: i.MX6UL/ULL/ULZ CPU Debug UART ARM Cortex A7 Core up to 900MHz Data UART - 2 Ports PMIC: CAN - 2 Ports PF 3001 SD(4-Bit) - 1 Port R AM: 10/100 Ethernet - Up to 2 Ports 256MB DDR3 (Expandable) USB OTG - 2 Ports 256MB NAND Flash (Expandable) 24bpp RGB display port Micro SD Slot (Optional)1 8Bit Parallel Camera Port eMMC Flash (Optional)1 I2S Audio or JTAG QSPI Flash (Optional)1 I2C Port Power Input: PWM - 2 Ports 3.3V @ 1A through SODIMM Edge GPIOs Operating Temperature: Boot mode signals 0°C to +70°C Commercial Operating System: -40°C to +85°C Industrial Form Factor: 67.6mm x 29mm Linux 4.1.15

Note1: At a time either NAND Flash or eMMC & QSPI flash or µSD & QSPI flash can be used in the SOM. By default NAND Flash is supported. Note2: Applicable only to UL2, UL3 SOMs.If 2nd Ethernet (ENET2) not used, it can be used as additional 3 UARTs or Key pad 4x4 or RMII interface.

22 i.MX6UL/ULL/ULZ SODIMM Module BLOCK DIAGRAM

10/100Mbps DDR3 RAM DDR3 (16bit) RMII Ethernet MMDC ENET1 10/100Mbps (256MB) Ethernet PHY 1 RAWNAND/ NAND Flash NAND (8bit) µSDHC2/ 2 (256MB) 10/100Mbps QSPI_A RMII 10/100Mbps Ethernet QSPI 1 QSPI (4bit) ENET2 Ethernet PHY (Optional)

2 eMMC 1 MMC (8bit) RMII/DATA UART x 3/Keypad (4x4) (Optional)

µSD Connector 1 SD (4bit) (Optional) USB OTG1 USB OTG1 HS PHY USB OTG2 USB OTG2 HS PHY SAI2/ I2S SODIMM JTAG JTAG PCB Edge CPU Connector i.MX6UL/ULL/ULZ RGB LCD (24bpp) (200Pin) LCDIF Camera (8bit)/eCSPI x 2 CSIO SD (4bit) µSDHC1

FLEXCAN1, CAN x 2 FLEXCAN2 Debug UART UART1

UART2, DATA UART x 3 (with CTS & RTS) UART3 I2C x 1 I2C1 Tamper/GPIOs PWM4, PWM x 2 PWM5 General Purpose Clock CCM-CLK Boot Mode Boot Mode 0, 1

Tamper/ Tamper/GPIOs GPIOs 3.3V On-board Power to PMIC Peripherals

1 At a time either NAND Flash or eMMC & QSPI flash or µSD & QSPI flash can be used in the SOM.By default NAND Flash is supported. 2 Applicable only to UL2, UL3 SOMs.If 2nd Ethernet (ENET2) is not used, it can be used as additional 3 UARTs or Key pad 4x4 or RMII interface.

OPTIONAL KITS/MODULES Linux 4.1.15 i.MX6UL/ULL/ULZ SODIMM Module i.MX6ULL Development Kit BSP Development/OS Porting Board Support Packages 4.3" LCD Display Kit Custom SOM/Carrier Development User Manual Camera Module Custom Application/GUI Development Design Review and Support OBD II Solutions

23 i.MX6 Q/D/DL/S SODIMM SOM System On Module iW-RainboW-G15M-SM

HIGHLIGHTS APPLICATIONS ARM Cortex A9 @ 1GHz/800MHz Intelligent Industrial Control Quad/Dual/Dual Lite/Solo core Systems Modular & Compact SODIMM Industrial Human-Machine form factor- 67.6mm X 37mm interface HD 1080p encode and decode Ultra Portable Devices 2D/3D Hardware Graphics Acceleration Home Energy Management Technical and quick customization support Systems 10+ years long term support Portable Medical Devices

DEVELOPMENT PLATFORM SPECIFICATIONS

CPU: PCIe x 1 i.MX6 Q/D/DL/S @1GHz/800MHz ARM-Cortex-A9 UART x 3 PMIC: 10/100/1000Mbps Ethernet MMPF0100 HDMI x 1 RAM: SATA x 1 * 1GB DDR3 for Q/D/DL (Expandable) USB Host 2.0 x 1 512MB DDR3 for Solo (Expandable) USB OTG 2.0 x 1 2MB SPI NOR Flash (Expandable) SD (4bit) x 1 8GB eMMC Flash (Expandable) I2S Audio x 1 Communication: LVDS Display x 1 10/100/1000 Ethernet PHY 24bpp RGB Display x 1 Power Input: 8bit Camera x 1 3.3V , 3.5A input through SODIMM edge I2C X 2 Operating Temperature: GPIOs -40°C to +85°C Industrial PWM x 4 0°C to +70°C Commerical Debug UART Port Form Factor: JTAG Port 67.6mm X 37mm SODIMM Form Factor Operating Systems: SODIMM Edge Connector Interfaces: Linux 4.1.15, Android Nougat 7.1.1, WEC 7*

Note: SATA support not available in i.MX6 DL/S Note: * Denotes Optional Features.

24 i.MX6Q/D/DL/S SODIMM Module BLOCK DIAGRAM

DDR3 RAM DDR3(64 bit) (512MB/1GB)

SPI Flash SPI (2 MB) 10/100/1000 Gigabit MMC (8 bit) Ethernet eMMC eSDHC4 Ethernet PHY (8GB)

UART1 UART x 3 UART4 UART5 RGB LCD (24bpp) DISP0 LVDS LVDS0

Camera (8bit) CSI0 SODIMM CPU PCB Edge HDMI i.MX6Q HDMI1.4 Connector (200Pin) SD (4bit) eSDHC3 I2S x 1 AUDMUX4

I2C x 2 I2C1, I2C2 PCIe x 1 PCIe

SATA x 1 SATA PWM x 4 PWM 1-4

Debug UART2 JTAG SJC

GPIOS GPIOs 3.3V On-board Power to PMIC Peripherals

OS SUPPORT DELIVERABLES OPTIONAL KITS/MODULES CUSTOM DEVELOPMENT

Linux 4.1.15 i.MX6 SODIMM Module i.MX6 Development Kit BSP Development/OS Porting Android Nougat 7.1.1 Board Support Packages 4.3” LCD Display Kit Custom SOM/Carrier Development WEC 7* User Manual Heat Spreader / Heat Sink Custom Application/GUI Development Camera Module Design Review and Support HMI Solutions

25 i.MX6 Qseven SOM System On Module iW-RainboW-G15M-Q7

HIGHLIGHTS APPLICATIONS ARM Cortex A9 @1GHz/800MHz Industrial HMI Quad Plus/Dual Plus/Quad/Dual/ Graphical Instrument Clusters Dual Lite/Solo core Video & Navigation OpenGL® ES 2.0 3D, OpenVG™ 1.1 graphics accelerators Portable Medical Devices Intelligent Industrial Control Multi format HD1080p HW decode systems and encode Home Energy Management Four simultaneous display support systems Optional Automotive grade Module Automotive IVI 10+ years long term support

DEVELOPMENT PLATFORM SPECIFICATIONS

CPU Data UART x 1 i.MX6 1GHz/800MHz ARM Cortex A9 QP/DP/Q/D/DL/S PWM PMIC GPIOs NXP PF0100 PMIC Expansion Connector 2 RAM Camera CSIx2 (8-bit) 1 1GB DDR3 for Q/D/DL (Expandable up to 4GB ) MIPI CSI, DSI 1 512MB DDR3 for Solo (Expandable up to 2GB ) 24-Bit RGB LCD IF Storage Dual UART 1 8GB eMMC Flash (Expandable ) 3x3 Key, Memory Bus 2MB SPI Flash (Expandable 1) ESAI, SPDIF On-board Micro SD Slot MLB Qseven Edge Connector I2C3, PWM, GPIO PCIe v2.0 x 1 lane Temperature HDMI 1.4 -40°C to 85°C SATA 3.0 x 13 Board Form Factor Gigabit Ethernet Qseven R2.0 Compatible Dual LVDS Power Input USB2.0 Host x4 5V, 1A Typical USB2.0 OTG Operating Systems AC97 Audio Linux 4.1.15 8-bit SD/MMC Android Nougat 7.1.1 CAN1 Windows Embedded Compact7 SPI, I2C Debug Support Debug UART x1 Onboard JTAG Header 1 Note1: Contact iWave for memory expansion support. Note2: Not populated in mass production SOM. Note3: Support available only for i.MX6 Quad and Dual SOMs. Note: Device drivers provided are for specific interface chipsets which are used in iWave's carrier board.

26 i.MX6 Qseven SOM BLOCK DIAGRAM

PCIex1 DDR3(64 bit) PCIe Bus DDR3 RAMPMIC MMDC SATA II SATA x 1 3.0 Gbps SPI USBOTG x 1 SPI NOR Flash eCSPI1 USB OTG HS PHY USBHost x 1 USB 2.0 Hub USBHost x 4 MMC (8 bit) USB HOST1 8GB eMMCPMIC eSDHC4 HS PHY (4 Port) LVDSO, LVDS x 2, PWM x 1 Micro SD SD (4 bit) LVDS1,PWM eSDHC3 HDMI x 1 Connector HDMI 1.4 Audio x 1 LCD(24 bpp) x 1, MIPI-DSI x 1 DISPO, AUDMUX4 MIPI DSI RGMII x 1 Gigabit Ethernet 10/100/1000 QSEVEN Camera1 (8bit) x 1 Ethernet PHY Expansion CSIO ENET PCB Edge Connector1 UART (with CTS & RTS) x 2 UART1, Nand Flash* Connector (80Pin header) UART3 SD/MMC(8bit) x 1 (230 Pin) CPU eSDHC1 ESAI x 1, SPDIF x 1 ESAI, SPDIF i.MX6 RTC Controller* I2C x 2 QP/DP I2C1, I2C2 Memory Bus (Address/Data Muxed) Q/D/DL/S SPI x 1 (Chip selects) EIM eCSPI2 CAN x 1 , Data UART x 1 Camera2 (8bit) x 1 CAN1/UART5 CSI 1 WDOG Single WDOG bit WDOG WDOG1 MIPI-CSI x 1 WDOG Controller MIPI CSI 8 GPIOs, Status & Control Singles Expansion GPIOs UART x 1 Connector2Expansion UART4 (80PinConnectors header) Dual SPDT Debug Keypad 3x3 JTAG KPP Switch IC* MLB x 1 MLB SJC JTAG (20Pin Header)* I2C3 x1 UART x 1 RS232 I2C3 UART2 Transceiver* 3Pin Header* Power to PMIC 5V 2Pin Power In* Peripherals Note: MLB is supported only in automotive part *Optional items not included in the standard deliverables.

www.iwavesystems.com OS SUPPORT DELIVERABLES OPTIONAL KITS/MODULES CUSTOM DEVELOPMENT

Linux 4.1.15 i.MX6 Qseven SOM i.MX6 Qseven Development kit Custom SOM/ Carrier Card Development Android Nougat 7.1.1 Board Support Packages 7” LCD Display Kit with Cap touch BSP Development/ OS Porting WEC7 User Manual Camera modules Design Review & Support Heat Spreader /Heat Sink

27 RZ/G1H, RZ/G1M, RZ/G1N Qseven SOM System On Module iW-RainboW-G21M/G20M-Q7

HIGHLIGHTS APPLICATIONS RZ/G1H : Quad Core Arm Cortex Industrial HMI and Access Control A15 @ 1.4GHz and A7 @ 780MHz Industrial Control and Automation RZ/G1M, RZ/G1N : Infotainment & Digital Signage Dual core ARM Cortex A15 @ 1.5GHz Video Surveillance & Security Built in HW Graphic acceleration Real Time Image Recognition Up to four channel video input Home & Office Automation Industrial temperature support available Industrial grade Linux 10+ years long term support

RZ/G1H RZ/G1M, RZ/G1N

DEVELOPMENT PLATFORM SPECIFICATIONS

CPU: Expansion Connector Interfaces: RZ/G1H: Quad Core ARM Cortex A15 and A7 24bpp RGB LCD or 16bit camera I/F RZ/G1M,Dual core RZ/G1N:ARM CortexDual A15 core ARM Cortex A15 24bit camera or dual 8bit camera IF Memory: 8bit camera interface DDR3 (Expandable up to 4GB)2 UART - 2 Ports 2MB SPI NOR Flash (For boot code) 8GB eMMC Flash (Expandable) 2 Memory bus interface Micro SD Slot (Optional)4 SPI/UART & CAN Qseven Edge Interfaces: SSI/I2S Audio 1 PCIe - 1 Port PWM-2 Ports, GPIOs USB3.0 host - 1 Port Communication: USB2.0 host - 2 Ports Gigabit Ethernet PHY - 1 Port USB2.0 device - 1 Port LVDS Display - 1 Port 2 Port USB HUB Gigabit Ethernet - 1 Port OS Support : Linux 3.10.31, QNX7.0* SDHC - 1 Port Power Input: SATA, HDMI Display - 1 Port 3 5V up to 2.5A through Qseven Edge I2S Audio - 1 Port Operating Temperature: I2C-2 Ports, SPI, CAN -40°C to +85°C Industrial UART, PWM-2 Ports, GPIOs Form Factor: JTAG or UART console 70mm x 70mm, Qseven R2.0 compatible

Note1: For RZ/G1N module configuration, Graphic core speed is 312MHz and PCIe support is not available by default. Note 2: By default 1GB DDR3 and 4GB eMMC only supported. Contact iWave for memory expansion support. Note 3: Supported only in RZ/G1H Note 4: Supported only in RZ/G1M, RZ/G1N

RZ/G1H RZ/G1M, RZ/G1N

28 RZ/G1H, RZ/G1M, RZ/G1N Qseven SOM BLOCK DIAGRAM

PCIe x 1 1

DDR3 (32bit) 1 DBSC3-CH0 • SATA x 1 DDR3L - 1GB PCIe/SATA1 (Upgradable) DDR3 (32bit) • DBSC3-CH1 2 • USB3.0 x 1 SPI USB3.0/SATA Programming SPI Flash - 2MB SPI • QSPI USB2.0 HUB Header USB OTG USB Host x 2 (Upgradable) USB1 (Oponal) (2 Ports) eMMC - 8GB MMC (8bit) MMC/SDHI3 USB2.0 OTG x 1 (Upgradable) MMC/SDHI3 USB0 LVDS x 1 LVDS-DU0 I2C2 RTC Controller PWM x 2 VRTC PWM3,PWM5

SSI0/SSI1 I2S x 1 5 SD (4bit) Micro SD Connector SDHIO Gigabit GMII x 1 LCD(24bpp) x 1 & Camera(8bit) x 1 EtherAVB Gigabit Ethernet (or) Camera (16bit) x 1 CPU Ethernet PHY QSEVEN DU1,VI1 Gigabit Expansion Camera(24bit) x 1 (or) RZ/G1H, PCB Edge LVDS1 6 Connector1 Camera (8bit) x 2 VI0,VI2 RZ/G1M, HDMI Connector (80Pin header) UART x 1 3 RZ/G1N SDHC (4bit) x 1 (230Pin) SCIF4 SDHI2 I2C x 2 Memory Bus (16bit Sync/Async) LBSC I2C2,I2C5 CAN x 1 SPI x 1 (2 Chip selects) CAN1 MSIOF2 SSI/I2S x 1 SSI3/SSI4 CAN x 1 Expansion CAN0 SPI x 1 (or) UART x 1(CTS, RTS) Connector2 4 UART (with CTS & RTS) x 1 MSIOF1 (80Pin header) SCIFB1 UART x 1 SCIF1/ 8 GPIOs, Status & Control Signals HSCIF1 4 GPIOs PWM x 1 PWM1 UART x 1 Dual SPDT Debug SCIF0 Switch IC (Oponal) VRTC 1 PCIe is supported by default. SATA1 is not supported by default. JTAG JTAG (Oponal) JTAG 2 USB3.0 is supported by default. SATA0 is not supported by default. (20 Pin Header) 3 SCIF4 cannot be supported if VI1 16bit camera is used. 4 HSCIF1’s ow control signals and MSIOF1 are multiplexed and either one On-Board 5V 2Pin Power In only can be used at a time. Power to Regulators (Oponal) Peripherals 5 Supported only by RZ/G1M,RZ/G1N 6 Supported only by RZ/G1H

Note: Green Font blocks are not supported in RZ/G1N CPU

OPTIONAL KITS/MODULES Linux 3.10.31 RZ/G1M,RZ/G1N SOM Module RZ/G1M Qseven Development Kit BSP Development/OS Porting QNX7.0* Board Support Package 7” LCD Display Kit with Cap touch Custom SOM/Carrier Development User Manual Camera Daughter Board Custom Application/GUI Development Camera modules Design Review and Support Heat Spreader /Heat Sink

29 Comparison of SMARC SOM Modules

Feature/SMARC SOM i.MX8M SMARC SOM i.MX8QM/QP SMARC SOM Snapdragon 820 SMARC SOM

i.MX8 QuadMax, Quad Plus, Dual Max Qualcomm APQ8096: 64-bit Quad kryo NXP i.MX8M Quad, Quad Lite, Dual CPU i.MX8 QuadMax: 2xCortex-A72, 4xCortex-A53 & Snapdragon 820 CPU. i.MX8M Quad:4xCortex-A53,1xCortex-M4 2xCortex-M4F; Dual Kryo cores Gold Cluster @2.15 GHz; i.MX8M QuadLite:4xCortex-A53,1xCortex-M4 i.MX8 QuadPlus: 1xCortex-A72, 4xCortex-A53 & Dual Kryo cores Silver Cluster @1.6 GHz; (no VPU) 2xCortex-M4F; Hexagon DSP with Dual hexagon vector i.MX8M Dual:2xCortex-A53 & 1xCortex-M4 i.MX8 DualMax: 2xCortex-A72 & 2xCortex-M4F processor(825MHz)

OpenGL/ES 3.1, OpenGL 3.0, Vulkan, OpenGL3.0, OpenGL ES3.2, 3.1, Graphics Core Adreno 530 3D Graphics @624MHz OpenCL 1.2 (via GPU) Vulkan

2G4Kp60(h.265,VP9),4Kp30(h.264),1080p60 Hardware Codecs (VC1,VP8,RV9,MPEG2,MPEG4p2,AVS/AVS+, 4K H.265 decode & 1080p H.264 H.265 4K60 decode, 4K30 encode h.263,DiVX)VPU decoder enc/deccapable VPU RAM 2GB LPDDR4 (Expandable) 4GB LPDDR4 (Expandable) 3GB LPDDR4 (Expandable) 32GB eMMC Flash(Expandable) Flash Storage 8GB eMMC Flash (Expandable) 16GB eMMC Flash (Expandable) UFS Flash(Optional) NOR Flash QSPI Flash (Optional) QSPI Flash (Optional) No Micro SD Micro SD slot (Optional) Micro SD slot (Optional) Micro SD slot WIFI+BLE Wi-Fi 802.11a/b/g/n/ac + BLE 5.0 Wi-Fi 802.11a/b/g/n/ac + BLE 5.0 Wi-Fi 802.11a/b/g/n/ac,BT4.1 SMARC Edge Connector Interfaces PCIe PCIe Gen 2.0(1 Lane) PCIe Gen 3.0(2 Lane) PCIe Gen 2.0(1 Lane) SATA 3.0 - 1 Port No CAN - 2 Ports 2 Ports SPI 1 Port * 1 Port No HDMI 2.0 1 Port 1 Port 1 Port USB 3.0 Host 1 Port 2 Ports 2 Ports USB 3.0 OTG 1 Port - No USB 2.0 Host 4 Ports 4 Ports 4 Ports USB 2.0 OTG - 1 Port 1 Port MIPI CSI0 (2lane) x 1 Port, MIPI CSI0 (2lane) x 1 Port, MIPI CSI0 (2lane) x 1 Port, MIPI CSI MIPI CSI1 (4lane) x 1 Port MIPI CSI1 (4lane) x 1 Port MIPI CSI1 (4lane) x 1 Port MIPI DSI 1 Port (4 lane) LVDS/MIPI DSI x 2 Ports (4 lanes each) MIPI DSI x 2 Ports (4 lanes each) Debug UART 1 Port 1 Port 1 Port Data UART DATA UART(with CTS & RTS)x1 Port, DATA UART(with CTS & RTS) x 1 Port, DATA UART(with CTS & RTS) x 2 Ports, DATA UART(without CTS & RTS)x1 Port DATA UART(without CTS & RTS) x 1 Port DATA UART(without CTS & RTS) x 1 Port QSPI 1 Port 1 Port No I2C 4 Ports 2 Ports 2 Ports GPIOs 12 12 12 SSI/I2S Audio 2 Ports 2 Ports MI2Sx1 Port SD (4bit) 1 Port 1 Port 1 Port Ethernet 10/100/1000Mbps x 2 Ports (AVB support 10/100/1000Mbps x 2 Ports(AVB support 10/100/1000Mbps x 1 Port on one port) on both Ports) Expansion Connector Interfaces * SAI 1 Port - - MIPI CSI0 (2nd 2lane) MIPI CSI MIPI CSI0 (2nd 2lane) MIPI CSI0(2nd 2lane) MIPI CSI2 (4 lanes) HDMI 2.0 RX - 1 Port - GPIO LVDS - 22 2 Ports(4 lanes each) - ESAI - 1 Port - MLB - 1 Port - SPDIF - 1 Port - I2C - 1 Port - CAN - 1 Port - SLIM BUS - - 1 Port * Power Input 5V through SOM edge connector 5V through SOM edge connector 5V through SOM edge connector Operating Temperature -40 C to +85 C Industrial -40 C to +85 C 0 C to +70 C 0 C to +70 C Commercial 82mmx50mm SMARC 82mmx50mm SMARC 82mmx50mm SMARC Form Factor R2.0 Compatible R2.0 Compatible R2.0 Compatible

OS Support Yocto Linux 4.14.98, Android Pie 9.0.0 Linux 4.14.98, Android Pie 9.0.0, Android Marshmallow or higher, Linux* QNX 7.0.0, Ubuntu 18.04.3 LTS Note: * Optional features are not supported by default 30 Comparison of SODIMM SOM Modules

Features/ Zynq 7000 SODIMM i.MX8M Mini i.MX8M Nano i.MX6 Quad / Dual RZ/G1E SODIMM i.MX6UL SODIMM SODIMM SOM SOM SODIMM SOM SODIMM SOM DL/Solo SODIMM SOM SOM SOM

Xilinx Zynq 7000 SoC i.MX8M Mini core Cortex i.MX8M Nano core Cortex i.MX6 Q/D/DL/Solo core Cortex Renesas RZ/G1E Dual core i.MX6 Ultra Lite Cortex CPU Single/Dual Cortex A9 @ A53 @ up to 1.6 GHz A53 @ up to 1.5 GHz A9 CPU @up to 1GHz Cortex A7 CPU @1GHz A7 CPU @528MHz upto 866MHz Cortex-M4F @ 400 MHZ Cortex-M7F @ 750 MHZ PMIC PMIC with RTC BD71847MWV BD71847MWV NXP PF0100 Discrete power regulators NXP PF3001 GC7000UL with Open CLE OpenGL ES2.0,OpenVG1.1 Power VR SGX540@260MHz Graphics Core - GCNanoUltra and Gc320 & Vulkan Support - 1080p60 H.265, H.264 Decode HW Codecs - 1080p60 Vp8, H.264 Encode - H.264 1080p encode and decode H.264 1080p encode and - decode 512MB DDR3 RAM 1GB DDR3 RAM for Q/D/DL CPU RAM 1GB LPDDR4 (Expandable) 1GB LPDDR4 (Expandable) 512MB DDR3 RAM 256MB DDR3 (expandable) (expandable to 1 GB) &512MB for solo CPU (expandable) (expandable) 512MB NAND Flash 256MB NAND flash(expandable) Flash Storage 8GB eMMC Flash (Expandable) 8GB eMMC Flash (Expandable) 4GB eMMC Flash(Expandable) 4GB eMMC Flash eMMC (Optional) (Expandable) Optional eMMC Flash NOR Flash QSPI Flash (Optional) 2MB QSPI Flash (Optional) 2MB QSPI Flash (Optional) 2MB SPI NOR (expandable) 2MB SPI NOR QSPI Flash (Optional) (expandable) Micro SD* Micro SD Slot (Optional) Micro SD slot(Optional) Micro SD slot - On-Module Micro On-Module Micro SD Slot* SD Slot SODIMM edge connector Interfaces

PCIe - PCIe x 1 Port - PCIe Gen2.0 x 1 Port - - - SATA - - 1 Port - - 10/100/1000 Mbps-1 Port 10/100 Mbps-2 Ports Ethernet 10/100/1000 Mbps-1 Port 10/100/1000 Mbps-2 Ports 10/100/1000 Mbps-1 Port 10/100/1000 Mbps-1 Port 10/100 Mbps-1 Port

HDMI 1.4 - - - 1 Port - - Through FPGA* LVDS - - 1 Port - - USB 2.0 Host - - - 1 Port 1 Port - USB 2.0 OTG 1 Port 2 Ports 1 Port 1 Port 1 Port 2 Ports 8-bit Camera Through FPGA* MIPI CSI & DSI is Supported 1 Port 1 Port (Optional) 1 Port # 24 Bit RGB LCD Through FPGA* - - 1 Port 1 Port 1 Port 1 Port 1 Port 12S Audio Through FPGA* 1 Port 1 Port 1 Port 1 Port 1 Port SD 1 Port 1 Port 1 Port 1 Port Debug UART Up to 6 Ports Data UART Through FPGA* 3 Ports 3 Ports 3 Ports 3 Ports 2 Ports CAN Through FPGA* - - 2 Ports 2 Ports Through FPGA* SPI 3 Ports 3 Ports Through FPGA* 2 Ports I2C 2 Ports 2 Ports 2 Ports 1 Port Through FPGA* 4 Ports 3 Ports 2 Ports PWM 2 Ports 2 Ports GPIOs 60LVDS/120 SE FPGA IOs JTAG 3.3V, 2A Typical Power Input 3.3V, 2A Typical 3.3V, 4A Typical 3.3V, 4A Typical 3.3V, 2A Typical 3.3V, 1A Typical -40°C to +85°C -40°C to +85°C -40°C to +85°C Industrial -40°C to +85°C Industrial Operating -40°C to +85°C -40°C to +85°C Industrial Temperature Industrial Industrial Industrial 0°C to +70°C Commercial 0°C to +70°C Commercial

Form Factor 67.6mm x37mm SODIMM 67.6mmx37mm SODIMM 67.6mmx37mm SODIMM 67.6mmx37mm SODIMM 67.6mmx37mm SODIMM 67.6mmx29mm SODIMM Linux 4.14.98, Android Linux 4.1.15, Android OS Support Linux 4.9.0 Linux 4.14.98, Android Linux 3.10.31 Linux 4.1.15 Pie 9.0.0, QNX 7.0.0*, Pie 9.0.0 Nougat 7.1.1 Ubuntu 18.04.3 LTS*

Note: * For i.MX6 SOLO SATA is Optional Note: * Optional features are not supported by default Note: # For i.MX8M Mini MIPI CSI & DSI is supported

31 Comparison of Qseven SOM Modules

i.MX6 QP/DP/Quad/Dual Feature/Qseven SOM RZ/G1H RZ/G1M RZ/G1N DualLite/Solo Renesas’s RZ/G1H CPU @1.4 GHz, Renesas’s RZ/G1M CPU @1.5 Renesas’s RZ/G1N CPU @1.5 NXP i.MX6 Quad Plus/Dual CPU Quad Core ARM Cortex A15 & Quad Core GHz, Dual Core ARM Cortex A15 GHz, Dual Core ARM Cortex A15 Plus ARM Cortex A9 @1GHz ARM Cortex A7 @780MHz Graphics Core PowerVR G6400 Graphics Core SGX544MP2 Graphic SGX544MP2 Graphic OpenGL ES3.0, @ 520MHz Core @ 520MHz Core @ 312MHz OpenVG1.1 H.264 1080p@ 60 decode, H.264 1080p@ 60 decode, Hardware Codecs H.264 1080p@ 60 decode, H.264 1080p@ 60 decode, H.264 1080p@ 60 encode H.264 1080p@ 60 encode H.264 1080p@ 60 encode H.264 1080p@ 60 encode 2GB DDR3 RAM 1GB DDR3 RAM 512GB DDR3 RAM 1GB DDR3 RAM RAM (Expandable to 4GB *) (Expandable to 4GB *) (Expandable to 2GB *) (Expandable to 4GB *) 8GB eMMC 8GB eMMC Flash Storage 8GB eMMC 8GB eMMC (Expandable *) (Expandable *) (Expandable *) (Expandable *) 2MB SPI Flash NOR Flash 2MB SPI Flash 2MB SPI Flash 2MB SPI Flash (For Boot Code) (For Boot Code) (For Boot Code) (For Boot Code) Micro SD* No On-Module Micro SD Slot On-Module Micro SD Slot On-Module Micro SD Slot Qseven Edge Connector Interfaces

PCIe Ports PCIe 2.0 x 1 Lane PCIe 2.0 x 1 Lane Muxed with USB3.0 Port PCIe 2.0 x 1 Lane SATA Ports Muxed with PCIe (or) USB3.0 Port Muxed with PCIe Port Muxed with USB3.0 Port SATA 2.0 x 1 Port Ethernet 100/1000 Ethernet 100/1000 Ethernet 100/1000 Ethernet 10/100/1000 Ethernet HDMI 1 Port No No 1 Port LVDS Upto 2 Ports 1 Port 1 Port 2 Ports USB 3.0 Host 1 Port 1 Port 1 Port No USB 2.0 Host 3 Ports 2 Ports 2 Ports 4 Ports USB 2.0 OTG 1 Port 1 Port 1 Port 1 Port Audio I2S Audio I2S Audio I2S Audio AC97/I2S Audio SD/MMC 1 Port 1 Port 1 Port 1 Port PWM 2 Ports 2 Ports 2 Ports 2 Ports Debug UART Data UART CAN SPI I2C 3 Ports 2 Ports 2 Ports 2 Ports GPIOs X 8 Expansion Connector Interfaces * CSI Camera Port Four 8bit / Two 16bit Ports Up to 3 Ports Up to 3 Ports 2 Ports MIPI CSI No No No MIPI DSI No No No 24 Bit RGB LCD IF No Gigabit Ethernet 100/1000 Ethernet No No No UART 4 Ports 2 Ports 2 Ports 3 Ports 16 Bit Memory Bus No Key Matrix No No No 3x3 Matrix SSI/I2/SPDIF No I2Sx1 Port 22 I2Sx1 Port SPDIFx1 Port ESAI No No No MLB No No No SPI 1 Port 1 Port 1 Port No I2C 3 Ports No No 1 Port CAN 1 Port 1 Port 1 Port No PWM 2 Ports 2 Ports 2 Ports 1 Port GPIO Power Input 5V, 2.5A Typical 5V, 2.5A Typical 5V, 2A Typical 5V, 2.5A Typical Operating Temperature -40 C to +85 C -40 C to +85 C -40 C to +85 C -40 C to +85 C Form Factor 70mmx70mm Qseven 70mmx70mm Qseven 70mmx70mm Qseven 70mmx70mm Qseven R2.0 Compatible R2.0 Compatible R2.0 Compatible R2.0 Compatible Linux 4.1.15, Android Linux 3.10.31 Linux 3.10.31 Linux 3.10.31 OS Support Nougat 7.1.1, WEC7*

32 OBD II Device - Secured Edge Analytics

HIGHLIGHTS

4G/3G/2G for Internet/ Best GPS Engine for Wi-Fi/BLE Support Connectivity Location Tracking

Cloud OBD II Standard Secured Data Transmission Multi Cloud Support Interface Support

Y-Cable QR Code

9-Axis Sensor Support Linux OS Support Battery for Anti-theft Alarm

Accelerometer, Gyroscope LS CAN, HS CAN, Ethernet CAN, Micro SIM, Nano SIM, e-SIM & Magnetometer CAN FD, SW CAN, RAW CAN

APPLICATIONS SPECIFICATIONS

Hardware Features: Dimensions: 103x84x21.5mm CPU: i.MX6ULL Cortex A7 CPU up to 792MHz Temperature Support: Memory: -20°C to +65°C 256MB DDR3 RAM Certification: CE, GCF, E24-Mark, KOMINFO 512MB NAND Flash Software features: Insurance Companies Fleet Management Positioning: Dashboard Support on Cloud/Server: GPS Receiver with Antenna Display of Car Parameters Sensors: GPS and Sensors Data Accelerometer, Gyroscope, Magnetometer* Different Cloud such as Amazon AWS, Microsoft Communication: Azure, IBM Bluemix, Siemens Mindsphere, Oracle 4G LTE Cat-M1/Cat-4*/Cat-1* through MQTT, HTTPS & TCP/IP Protocols 3G/2G module with Antenna Custom Development: Connected Cars Two Wheelers Micro SIM/Nano SIM*/e-SIM* Support for retrieving the raw CAN data directly Wi-Fi 5GHz Hotspot/ Station mode, BLE 5.0 Support for SAE J1939 protocol OBD II Protocol support: HS CAN, LS CAN*, Auto Grade Linux Support CAN FD*, Ethernet CAN*, SW CAN*, RAW CAN* 4G/3G/2G Support Specific Features: ISO-15765-4 CAN, Support to customers on developing their own ISO 14230 KWP2000*, ISO 9141-2*, SAE J1850 application and cloud on the OBD II device PWM*, SAE J1850 VPW*,J1939* NB - IoT Support (Narrowband- IoT) Asset Tracker Parking Payment System Power Input: 12V/24V Power Input from OBD II Port Electrical Specifications: Optional Features: Working Voltage: 8-36V USB Device 2.0 x 1 Sleep Mode: Up to 7mA @12V Status LED x 1 (Configurable), Power LED x 1 Battery Backup: Lithium-ion Polymer (LIP) GPIO’s x 4 (2 IN, 2 OUT) 3.7V 1500mAh OS: Linux 4.1.15 Enclosure: ABS

Diesel Engines Cleaning Machine Note: * Based on customer requirement, other optional Features/Protocols can be supported.

33 40 Custom and Performance Scalable HMI Solution

HIGHLIGHTS APPLICATIONS

A72 2GB 10+ M7 1GB Years EV Charger Automation

Interactive Kiosk

IP Rated Vending Food & Machine Brewery

ADVANTAGES Vast experience in hardware,software and application development Strategic partnership with semiconductor manufacturer In house resources for custom enclosure design for indoor and outdoor application Partnership with display and touch manufacturers to meet custom display requirement Custom plastic & metal part manufacturing for durable product

34 TECHNICAL SPECIFICATIONS Customized HMI Solutions CPU iMXRT 1052 iMX6 Solo iMX6 DL iMX6 Dual iMX6 Quad Zynq 7000 Core Class Arm Cortex M7 Arm Cortex A9 CPU Clock 600 MHz 1 GHz 1 GHz 1.2 GHz 866 MHz

2D graphics, 2D graphics, 2x 2D graphics 2x 2D graphics TM NEON media- 3D graphics 3D graphics engines, engines, Features Generic 2D Graphics engine processing engine with one with one 3D graphics with 3D graphics with up to 85K logic cells shader shader four shaders four shaders Memory Flash Memory 512 Mb Hyper Flash 4GB eMMC Flash* 8GB eMMC Flash

RAM 256 Mb SDRAM 512 MB DDR3* 1 GB DDR3* 512 MB DDR3*

SD Card Slot Micro SD Slot Micro SD Slot Operating System Supported OS FreeRTOS 10.2.0 Linux 4.1.15 & Android 7.1.1 Linux 4.14.0 GUI emWin QT QT Communication Interfaces Ethernet 10/100 Mbps Ethernet (RJ45) 1x 10/100/1000 Mbps Ethernet (RJ45) 1x USB Host( Type A) 2x USB Host( Type A) 1x USB OTG USB 1x USB OTG( Type Micro B) 1x USB OTG( Type Micro B) (Type Micro B) CAN 2x 1Mbps CAN RS485 2x RS485 1x RS485 RS232 1x RS232 Wireless Communication Interfaces Wi-Fi IEEE 802.11 b/g/n Bluetooth Bluetooth 4.0 Video HDMI - Full HD HDMI - Supported LCD Size 4.3" & 7" 4.3", 7", 10.1" & 12.1" LCD Specifications Size 4.3" 7" 10.1" 12.1" Resolution 480 x 272 800 x 480 1280 x 800 1280 x 800 Aspect Ratio 16:09 16:10 16:10 16:10 Brightness 850 cd/m 2 850 cd/m2 800 cd/m 2 500 cd/m2 Backlight Life Time Min 50000 Hrs Min 50000 Hrs Min 70000 Hrs Min 50000 Hrs 60 °,60 °,60 °,60 ° 50 °,70 °,70 °,70 ° Viewing Angle IPS Panel (TBLR) (TBLR) Colour Depth 16.7M Colour Projected Projected Capacitive Projected Capacitive Touch Capacitive multi touch (5points) multi touch (10points) multi touch Surface Treatment Anti-Glare Anti-Glare, 7H hard glass Anti-Glare, 3H hard glass Enclosure Front Bezel ABS Plastic Back Cover Aluminium Ingress Protection Front IP 66 / Rear IP 20 Power Supply Supply Voltage 12/24V Typical Environmental Conditions Storage Temperature -20°C to +70°C Operating 0°C to +60°C Temperature Humidity 95% @ 40°C *Expandable

35 PHY PCIe Gigabit Ethernet PCIe1 Ethernet PHY

PCIe x 1 (Optional)

Cost & power Optimized power & Cost Feature Rich & performance & Rich Feature

Dual ARM ARM Dual SOM

SOM

scale+

Dual ARM Cortex A9

2018

Coming Soon Zynq 7000

Zynq Ultra Cortex A72 & A53 & A72 Cortex

Coming Soon

i.MX8 SMARC i.MX8M SMARC http://www.iwavesystems.com/xilinx-zynq-7000-soc-som-module.html SOM Heat Sink http://www.iwavesystems.com/rz-g1e-sodimm-module.html HMI BLOCK DIAGRAM

SOM

Arria10

SoC SOM Quad Kryo @ Kryo Quad

SBC

660K FPGA 660K 2.15 &1.6 GHz &1.6 2.15

2017

RZ/G1C Qseven SD820 SMARC OBD II BLOCK DIAGRAM Dual ARM Cortex A9 Cortex ARM Dual http://www.iwavesystems.com/imx6ul-sodimm-module.html Dual ARM Cortex A7 http://www.iwavesystems.com/i-mx6ull-som-module.html

All LCD display with Quad Kryo @ Kryo Quad

2016

2.15 &1.6 GHz &1.6 2.15 Quad ARM ARM Quad http://www.iwavesystems.com/i-mx6-sodimm-module.html

RZ/ G1H Q7 SOM

SD820 SBC RGB, LVDS, VGA, Camera Interface Cortex A15 & A7 & A15 Cortex DVI or HDMI/4K

BSP support

i.MX6UL/ULL SODIMM SOM

ARM Cortex A7 Touch DDR3 RAM Accelerometer http://www.iwavesystems.com/nxp-imx8-quadmax-smarc-som-module.html Screen

2015 Cortex A15 Cortex ARM Dual Dual ARM SIM Connector

RZ/G1M, G1N Q7 SOM NAND Flash http://www.iwavesystems.com/snapdragon-820-apq8096-smarc-som-module.html

ARM Dual Cortex A7

RZ/G1E SODIMM SOM DDR up to 4GB Magnetometer 4G Module with Antenna POE/ Gb Ethernet

V soc V ARM CPU 2014 NOR/ NAND/ Gyroscope Status and Power LEDs 110K FPGA 110K Controller with eMMC/ SATA

Cyclone

Q7 SOM Memory Dual ARM Cortex A9 Cortex ARM Dual http://www.iwavesystems.com/rz-g1h-qseven-som-module.html WiFI, BT and BLE Mul c ore OBD II Interpreter GPS Module with Antenna Mulmedia SMARC

Vybrid SOM USB and SD

ARM Cortex A5 Processor

2013 http://www.iwavesystems.com/rz-g1m-qseven-module.html Wiﬁ BT Module with Antenna

OBD II Connector 128MB ------2G/4G LTE/ IO Port NAND FLASH NB-IoT (PCIe, Modbus, 12V RZ/G1H Qseven Module http://www.iwavesystems.com/i-mx6-qseven-som.html CAN, Digital IO, Power Circuit & PMIC On Board Power RS232/485/422) Ba ery 128MB

2012 http://www.iwavesystems.com/altera-cyclone-v-soc-qseven-module.html

NAND FLASH Q7 SOM Q7 Industrial Isolated or Wide Optional features Default features

TI DM8168 Q7 SOM

i.MX6x SOM SBC range power ARM Cortex A8+ DSP http://www.iwavesystems.com/am389x-dm816x-q7-module.html Input

128MB MXM SOM MXM NAND FLASH Automotive Audio RTC 2011 * All Customizable features

i.MX53x SOM

ARM Cortex A8 http://www.iwavesystems.com/xilinx-zynq-7000-soc-som-module.html

Multicore ARM Cortex A9 Cortex ARM Multicore

PICO SBC PICO

SODIMM SOM SOM SODIMM Commercial Commercial ------

------http://www.iwavesystems.com/altera-arria-10-soc-som-module.html 2010 OS SUPPORT DELIVERABLES Software Application Support CUSTOM DEVELOPMENT Linux 3.14.38 OBD II Device Mobile app for Car Tracker Application Support for retrieving the raw CAN data directly SODIMM

i.MX50x Power SBC User Manual Dashboard Support on Cloud/Server Support for SAE J1939 protocol Auto Grade Linux Support http://www.iwavesystems.com/qualcomm-snapdragon-820-apq8096-single-board- 3G/2G Support computer.html

2009 Support to customers on developing their own

ARM Cortex A8 OS SUPPORT DELIVERABLES CUSTOM DEVELOPMENT application on the OBD II device

i.MX51x SOM http://www.iwavesystems.com/rz-g1c-single-board-computer.html Linux, Andriod, Windows Embedded HMI Device BSP Development/OS Porting NB - IoT Support (Narrowband- IoT) Processor: RTC Compact (WEC), RTOS (FreeRTOS, User Manual Custom Application/GUI Development Customers to use our Design to develop & use their own i.MX6X 800MHz–1GHz ARM Cortex A9 processor IP rated power ON LED Integrity and QNX) Design Review and Support private cloud, Data analytics, different applications, etc.

Memory: Piezo buzzer for alarm purpose ARM 9 http://www.iwavesystems.com/i-mx6-pico-itx-sbc.html

i.MX27 1GB DDR3 expandable up to 2GB Dimensions: 252 mm (L) x 89 mm (W) x 64 mm (T) SOM & SBC 2008 16 V to 36 V 4GB eMMC Flash expandable up to 32GB Input voltage range: ------

------2MB SPI Flash Device Designed to Meet: Micro SD Slot 810E Environmental specification Peripherals: IP 65 3.5 inch LCD with resistive touch panel 461E EMI, EMC specification 20 keys with backlight keypad Circular Connectors: Audio headphone out (Left and Right) 26 pin connector for RS232, USB, Audio interfaces GPS module 10 pin connector for power FPGA Module 10/100/1000Mbps Ethernet Optional Features : Wi-Fi and Capacitive touch 1 x USB OTG device 2.0 OS: 36 5 3 x RS 232 ports Linux / Android

*Optional features are not supported by default

Hardware Features: Optional Features: CPU: ARM Processor USB OTG* Memory: Status LED* Domain Focus DDR3 RAM eSIM* NAND Flash OS: Linux 3.14.38 Positioning: Dimensions: Up to 80x52x25mm (excluding GPS Receiver with Antenna OBD II Connector) Sensors: Temperature Support: -25 ° C to +85° C Accelerometer Software features: Gyroscope Dashboard Support on Cloud/Server: Magnetometer* Display of Car Parameters, GPS and Sensors Data Communication: with different Cloud such as Amazon AWS, Cellular Support: 2G/3G/4G module with Antenna Microsoft Azure and IBM Bluemix or TCP/IP server Nano SIM card iWave Car tracker application: Wi-Fi Module (802.11b/g/n) with Antenna Live – location tracking i.MX6 Quad/Dual i.MX6 Dual Lite i.MX6 Solo Cyclone V SOC DM 8168 J1962 compliant OBD II connector with all Driver Behavior NXP i.MX6 Dual Lite ARM NXP i.MX6 Solo ARM Cyclone V SoC, Dual ARM Cortex- TI DM8168 ARM Cortex-A8 CPU Protocol support: ISO-15765-4 CAN, ISO Ignition status NXP i.MX6 Quad/Dual ARM Cortex A9 @1GHz Cortex A9 @ 1GHz Cortex A9 @1GHz A9 HPS + FPGA up to 110K LEs @1.2 GHz + C674x DSP @1GHz 14230 KWP2000*, ISO 9141-2*, SAE J1850 Trip history PWM*, SAE J1850 VPW* Fuel Status etc. OpenGL ES3.0, OpenVG1.1 OpenGL ES2.0, OpenVG1.1 OpenGL ES2.0, OpenVG1.1 No OpenGL ES2.0, OpenVG1.1 Power Input: 12V/24V Power Input from OBD II Port H.264 1080p@ 60 decode, H.264 1080p@ 30 + D1 H.264 1080p@ 30 + D1 H.264 1080p@ 60 No Note: * Based on customer requirement, other optional Features/Protocols can be supported. H.264 1080p 30 BP encode decode,H.264 1080p decode,H.264 1080p decode & encode 30 BP encode 30 BP encode 1GB DDR3 RAM 1GB DDR3 RAM 512GB DDR3 RAM 512GB DDR3 with ECC HPS, 1GB DDR3 SDRAM (Expandable to 4GB *) (Expandable to 4GB *) (Expandable to 2GB *) 256MB DDR3 for FPGA 4GB eMMC (Expandable *) 4GB eMMC (Expandable *) 4GB eMMC (Expandable *) 16MB QSPI Flash* (Expandable) 128MB NAND Flash (Expandable*) P1 Connector: EPCQ/QSPI Flash * for FPGA 2MB SPI Flash (For Boot Code) 2MB SPI Flash (For Boot Code) 2MB SPI Flash (For Boot Code) No It is used to connect the OBD ll Device. On-Module Micro SD Slot On-Module Micro SD Slot On-Module Micro SD Slot P2 Connector: On-Module Micro SD Slot On-Module Micro SD Slot (default boot) (default boot) Tools Qseven Edge Connector Interfaces It is used to connect the DTC reader to know the diagnostic trouble code. Tools PCIe 2.0 x 1 Lane PCIe 2.0 x 1 Lane PCIe 2.0 x 1 Lane PCIe Gen1 x 4 Lane PCIe 2.0 x 2 Lane IDEs, Parasoft, CCS, VxWorks P3 Connector: work bench, Visual Studio, SATA 2.0 x 1 Port No No SATA2.0 X 1 Port SATA 2.0 x 2 Port PHY It is used to connect the car OBD ll Port. PCIe Eclipse, Multi, Synergy e2 Studio 10/100/1000 Ethernet 10/100/1000 Ethernet 10/100/1000 Ethernet 10/100/1000 Ethernet 10/100/1000 Ethernet Gigabit Ethernet 1 Port PCIe1 Ethernet 1 Port 1 Port 1 Port No P4 Connector: PHY 2 Ports 2 Ports 2 Ports 2 Ports 1 Port It is used to connect the IO’s. PCIe x 1 (Optional) Protocols No No No No No 4 Ports 4 Ports 4 Ports 4 Ports 4 Ports 1 Port 1 Port 1 Port No 1 Port AC97/I2S Audio AC97/I2S Audio AC97/I2S Audio AC97/I2S Audio No Middleware/ Firmware 1 Port 1 Port 1 Port 1 Port 1 Port MQTT 2 Ports 2 Ports 2 Ports 2 Ports 2 Ports MQTT No

Feature Rich & performance & Rich Feature Cost & power Optimized power & Cost 2 Ports 2 Ports 2 Ports 2 Ports 2 Ports

Expansion Connector Interfaces *

2 Ports 2 Ports 2 Ports No 2 Ports WiFi/BT No No (Optional)

2020 No No Drivers Engineering Services No No

SOM

BSP support Dual ARM ARM Dual No scale+ No No No 1 Port

Zynq Ultra

Cortex A72 & A53 & A72 Cortex i.MX8M SMARC SOM Block Diagram

i.MX8 SMARC Coming Soon Coming 3 Ports No 3 Ports 3 Ports 2 Ports 2G/3G/4G for Internet/ Cloud connectivity No No Ideation & Debugging Tools 3x3 Matrix 4x4 Matrix 3x3 Matrix 3x3 Matrix No Conceptuation GPS for Vehicle location tracking

SPDIFx1 Port SPDIFx1 Port SPDIFx1 Port No I2Sx2 Ports • Security Monitoring SOM

SOM Jlink, PEEDI No No

Zynq 7000 Zynq

Cortex A9 Cortex

Dual ARM ARM Dual Quad Kryo @ Kryo Quad

2.15 &1.6 GHz &1.6 2.15 Gigabit

SOM & SBC & SOM 9 Axis Sensors Support

Coming Soon No SD820 SMARC SD820 No DDR4 (32bit) RGMII Ethernet Ethernet i.MX8M SMARC DDR4-1GB ENET Remote monitoring for railways DDRC • 2018 Displays Eclipse-based User Interface development tool No No No No No U-Boot (Upgraded) PHY Gigabit Ethernet PHY Transceiver x 1 J1962 compliant OBD II interface 1 Port 1 Port 1 Port 1 Port No Video and a runtime engine for the target system eMMC-8GB MMC(8bit) Gigabit uSDHC1 (Upgraded) Pcle Ethernet No No No No No E-Boot Pcle1 Ethernet PHY Product • Patient monitoring Camera Architecture & PCIe to Ethernet controller with PHY x 1 Wi-Fi Hot spot for Browsing 1 Port 1 Port 1 Port No No UEFI Micro SD (Optional) Maintainance SBC LVDS &SE IOs Storage (Optional) PCIe x 1 Prototyping

RZ/G1C RZ/G1C BLE 4.0 SODIMM SOM SODIMM RZ/G1E RZ/G1E Bare Box QSPI Flash QSPI • Food & brewery 5V, 2A Typical 5V, 1A Typical 5V, 1A Typical 5V, 2A Typical 5V, 2A Typical Wireless QSPI0A Quad ARM ARM Quad Expertise in QT application Framework to build Pcle x 1

RZ/ G1H Q7 (Optional) SOM

Dual ARM Cortex A7 Cortex ARM Dual Pcle2 ARM Dual Cortex A7 Cortex Dual ARM Cortex A15 & A7 & A15 Cortex -40 C to +85 C & 0 C to + 70 C -40 C to +85 C & 0 C to + 70 C -40 C to +85 C 0 C to +70 C Battery for Anti-Theft Alarm -40 C to +85 C & 0 C to + 70 C Others UART USB3.0 OTG x 1 applications for the embedded solutions Debug Header UART1 70mmx70mm Qseven 70mmx70mm Qseven 70mmx70mm Qseven 70mmx70mm Qseven 70mmx70mm Qseven (Optional) USB1 USB2.0 OTG x 1 • Industrial operator panel R2.0 Compatible R2.0 Compatible R2.0 Compatible R2.0 Compatible R2.0 Compatible Software USB3.0 x 1 Secured data communication with Multiple Clouds like Amazon JTAG Header JTAG USB2.0 x 1 2016 Linux 3.14.28,Android Linux 3.14.28,Android Linux JTAG USB2 Linux 3.14.28,Android Linux 3.10 Linux 2.6.37 (Optional) AWS, Microsoft Azure, IBM Bluemix etc... and TCP/IP Server Support 5.0 Lollipop, WEC7 5.0 Lollipop, WEC7 Streaming USB2.0 HUB USB2.0 • Instrument cluster

5.0 Lollipop, WEC7 Android (4ports)

Cortex A15 Cortex

ARM Dual Dual ARM

SODIMM SOM SODIMM i.MX6UL/ULL

Arria10 SoC SOM Host x 4 Product ARM Cortex A7 Cortex ARM ...... 660K FPGA 660K RTCP/IP

RZ/G1M, G1N Q7 SOM Note: * Optional features are not supported by default SD x 1 Manufacturing .... Linux OS Support Integrity uSDHC2 Hardware Design

Dual ARM Cortex A9 Cortex ARM Dual PROTOCOL Engineering • Digital Signage WiFi/BT Services ...... ------QNX Light & Compact Design 21 GUI FRAME CPU (Optional) SMARC Edge Services VxWorks i.MX8M Connector

V soc V APIs SAI x 2 eCSPI1

WEC RTOS 100 Pin SAI1 SAI6 eCSPI1 SOM Vybrid Expansion QSP x 1 110K FPGA 110K Visual C++ & C# application development Connector SPDIF x 1 QSPIOB

ARM Cortex A5 GPIO

2014 Q7 SOM Q7

Cyclone Cyclone (Optional) Q7 SOM Q7 Industrial HDMI x 1 Dual ARM Cortex A9 Cortex ARM Dual HDMI TX

i.MX6x SOM SBC MIPI DSI X 1 MIPI DSI MIPI CSI x 2

MIPI CSI

MXM SOM MXM Automotive Automotive I2S x 2 Software 05 SAI2,SAI5 Certification & Operating Systems Development UART1,UART2, UART x 4 Qualification UART3,UART4

I2C1,I2C2 I2C x 4

2012 05

Multicore ARM Cortex A9 Cortex ARM Multicore Embedded Linux, WEC OPTEE 2.x

I2C3,I2C4

SODIMM SOM SOM SODIMM Commercial Commercial PICO SBC PICO ...... ------PWM1,PWM3, PWM x 3 Mechanical

------

Q7 SOM Q7 TI DM8168 DM8168 TI ------PWM4 Android Design ARM Cortex A8+ DSP TAs, PTAs

Image Authentication SOM i.MX53x Application Domains SNVS Tamper, SNVS RTC

2010 Peripheral Drivers Real Time

OS SUPPORT DELIVERABLES OPTIONAL KITS/MODULES CUSTOM DEVELOPMENT SBC i.MX50x i.MX50x Operating Systems Yocto Linux 4.9.51 i.MX8 SMARC Module i.MX8QM Development Kit BSP Development/OS Porting Instrument Cluster Keratometer Android Oreo 8.0.0 Board Support Package 5.5” Cap touch Display Custom SOM/Carrier Development ARM Cortex A8 Cortex ARM Vehicle Telematics Patient Monitoring User Manual Heat Sink Custom Application/GUI Development Automotive Medical Camera Module Design Review and Support Driver Console Endoscopy Integrity, VxWorks, QNX, Drivers

HMI around i.MX8M SOM ARM 9 ARM

2008

SOM & SBC & SOM

i.MX27 SOM i.MX51x i.MX51x Free RTOS and ThreadX IIoT Gateway Flowmeter IIoT Industrial Display, Storage, Ethernet, Smart Switches Industrial PC

------

------Data Logger Industrial HMI Audio, Video, Wireless (Wi-Fi, BT), Touch, CAN and Sensor Protocol/ Stacks 36 CAN Stack (J1939), Wi-Fi Stack (NDIS, Supplicant), Frameworks 46 BT Stack (Bluez), MQTT Qt, TouchGFX, Crank Software and Guiliani

iWave Advantages and Support

Industrial and Fully standard Commercial grade compatible SOMs Temperature Support (Qseven & SMARC)

Carrier board 10+ years long SOMs based on NXP, review and term product Xilinx, Intel PSG, software support Renesas, Qualcomm, support & TI

Software Hardware Flexible custom ODM Product design & Rugged Handheld Computer SOM Quick customization configurations services

i.MX8M Mini SODDIM SOM FPGA HIGHLIGHTS i.MX8M Mini SODDIM SOM Block Diagram Domain Focus

Processor: i.MX6X Industrial Medical 800MHz –1GHz Connectivity: Wi-Fi Tracking: GPS HIGHLIGHTS Cortex A9 LPDDR4 RGMII Gigabit Ethernet (32bit/16 bit) ENET Ethernet Cortex-A53 @ upto 1.6 GHz LPDDR4-2GB DDRC (Upgradable) PHY Cortex-M4F @ 400 MHz MMC (8bit) Communication: eMMC – 8GB PCIe uSDHC3 1 Ethernet Gigabit Ethernet 1. USB OTG device 2.0, RS-232 (Upgradable) PCIe1 7.4 V, 3500 mAh Li-ion OS: Linux / Android PHY ARM v8-A 64-bit architecture 2. Ethernet 10/100/1000 Sd1 (4bit) battery MicroSD 2 Mbps uSDHC1 PCIe x 1 Coming 4Kp60(h.265,VP9),4Kp30(h.264) (Optional) Automotive SOMs / Solutions SPI3 2 USB 2.0 OTG x 1 1080p60(VP9, HEVC/H.265, AVC/H.264, VP8) VPU eCSPI3 USB1 Computer Vision WiFi/BT Ruggedized to meet Module UART 1 Soon UART 1 USB 2.0 OTG x 1 GCNanoUltra and GC320 USB2 1. 810E Environmental specification QSPI Flash QSPI QSPIA SD x 1 Wi-Fi 802.11n + BLE4.0 2. IP 65 (Optional) uSDHC2 3. 461E EMI, EMC specification SODDIM Dual 1000/100/10 Mbps Ethernet (One is optional) I2C RTC Ctrl eCSPI2, eCSPI2 x 2 Edge (Optional) eCSPI3 Connector 2GB LPDDR4 memory (Expandable) I2C1 JTAG I2C i.MX8M JTAG (200 Pin) PMIC IoT Mini I2S x 1 Avionics SAI5

UART 3 Debug header UART4 I2C x 2 (Optional) I2C2,I2C3 PWM x 2 PWM1,PWM2 APPLICATIONS SPECIFICATIONS 1 UART x 4 UART1,UART2, 3 3 UART3,UART4 APPLICATIONS SPECIFICATIONS Military/ Government MIPI DSI MIPI DSI0 [3:0] Processor RTC SOC: NXP i.MX8M Q,QL,D,DL,S,SL CPU S0DDIM Edge Connector Interfaces: Industrial HMI i.MX6X 800MHz-1GHz ARM-Cortex-A9 processor IP rated power ON LED MIPI CSI0 [3:0] Upto 4 x Cortex-A53 & 1 x Cortex-M4F Gigabit Ethernet x 2 Port(One is optional) MIPI CSIO Agriculture/Environmental Industry Memory piezo buzzer for alarm purpose Memory: PCIe x 1Port SPDIF x 1 Home Automation 1GB DDR3 expandable up to 2GB Dimensions: 252 mm (L) x 89 mm (W) x 64 mm (7) SPDIF 2GB LPDDR4 (Expandable upto 8 GB) USB 2.0 OTG x 2 Port 4GB eMMC Flash expandable up to 32GB Input voltage range: 16 V to 36 V SAI x 1 Digital Signage 8GB eMMC Flash (Expandable) SD(4 bit) x 1 Port Automobile industry SAI1 2MB SPI Flash Device Designed to Meet 2 MB QSPI Flash(optional) SAI/I2S (Audio Interface) x 1 Port Micro SD Slot 810E Environmental specification GPIO x 20 Audio/Video Streaming devices

GPIO Micro SD Slot Debug UART Aviation/Aeronautics Peripherals IP 65

Video Analytics Communication: Debug UART(with CTS & RTS) x 2 Ports 3.5 inch LCD with resistive touch panel 461E EMI, EMC specification

Cost & power Optimized power & Cost Feature Rich & performance & Rich Feature Wi-Fi 802.11n + BLE4.0 Combo Module Debug UART(without CTS & RTS) x 1 Ports 20 keys with backlight keypad Circular Connectors General Embedded Gigabit Ethernet PHY Transceiver x 1 SPI x 2 Ports,I2C x 2 Ports, PWM x 2 Ports Field Service/ Data collection Audio headphone out(Left and Right) 26 pin connector for Rs232, USB, Audio interfaces PCIe to Gigabit Ethernet PHY Transceiver x 1 JTAG GPS module 1 0 pin connector for power (Optional) MIPI DSI x 1 Channel 10/100/1000 Mbps Ethernet Optional Features: Wi-Fi and Capacitive touch Form Factor: MIPI CSI x 1 Channel Transportation/Logistics 1 x USB OTG device 2.0 OS 67.6mm x 37mm 3 x RS 232 ports L inux / Android

OS SUPPORT DELIVERABLES OPTIONAL KITS/MODULES CUSTOM DEVELOPMENT SPDIF x 1 Port SOM 2020 OS Support: GPIOs

scale+ Dual ARM ARM Dual Linux 4.9 Travel/Hotel and Airline operations Coming Soon Coming i.MX8M Mini SODDIM Module i.MX8M Mini + Development Kit Linux 4.9, Android Oreo* Temperature: Industrial (-40°C to +85°C)

Zynq Ultra

Cortex A72 & A53 & A72 Cortex BSP Development/OS Porting i.MX8 SMARC SMARC i.MX8 Board Support Package Custom SOM/Carrier Development SMARC Qseven Warehousing and Distribution User Manual Custom Application/GUI Development

Design Review and Support

Dual ARM Cortex A9 Cortex ARM Dual

Quad Kryo @ Kryo Quad SOM

Zynq 7000 SOM 2.15 &1.6 GHz &1.6 2.15

SOM & SBC & SOM 48 SD820 SMARC SD820

Coming Soon Coming

2018 i.MX8M SMARC SMARC i.MX8M

SODIMM

SODIMM SOM SODIMM 5 RZ/G1E RZ/G1E

RZ/G1C SBC RZ/G1C * Under Development

Dual ARM Cortex A7 Cortex ARM Dual

Quad ARM ARM Quad ARM Dual Cortex A7 Cortex Dual ARM Cortex A15 & A7 & A15 Cortex

RZ/ G1H Q7 SOM ARM Dual Cortex A15 Cortex Dual ARM

RZ/G1M, G1N Q7 SOM 4 4

2016

ARM Cortex A7 Cortex ARM

SODIMM SOM SODIMM

i.MX6UL/ULL 660K FPGA 660K

Arria10 SoC SOM

Dual ARM Cortex A9 Cortex ARM Dual ------110K FPGA 110K

2014

Q7 SOM Q7

Industrial

Q7 SOM Q7

Cyclone V soc soc V Cyclone Dual ARM Cortex A9 A9 Cortex ARM Dual

ARM Cortex A5

Vybrid SOM Vybrid • Open architecture feature to Quickly customize customer Concept

i.MX6x SOM SBC

requirement and get manufactured/fitted into any customer DM 816x Qseven Module MXM SOM MXM Automotive Automotive application • Customize performance starting from microcontroller to System On Module iW-RainboW-G12M-Q7 Support & Upgrade Implementation DM816x Qseven SOM BLOCK DIAGRAM

Multi core High performance ARM SoC

Q7 SOM Q7

TI DM8168 DM8168 TI

Multicore ARM Cortex A9 Cortex ARM Multicore

2012

ARM Cortex A8+ DSP

PICO SBC PICO

SODIMM SOM SOM SODIMM Commercial Commercial ------• With complete range of processors, can support LCD from

------4.3 inch, 7 inch and 10.1 inch to available LCD size and resolution. Support LCD with RGB, LVDS, VGA, DVI or HDMI/4K interface HIGHLIGHTS APPLICATIONS i.MXRT SBC •

Micro SD C674x 1 GHz DSP+ARM Cortex A8 @ 1.2 GHz Industrial Automation Single Board Computer iW-RainboW-G32S SOM i.MX53x • i.MXRT SBC BLOCK DIAGRAM Integrated high bandwidth connectivity Medical ARM Cortex A8 Cortex ARM • peripherals 2010 HMI SDIO x 1 • Customized wired Connectivity and wireless connectivity SGX530 3D Graphics Engine for rich Interactive POS HIGHLIGHTS APPLICATIONS 128MB Certification SATA2.0 x 2 user interfaces Prototype

• Customized enclosure design and manufacturing for IP5x NAND FLASH PWM SBC i.MX50x i.MX50x Single Board Computing TFT LCD with Flex PWM4 Leverage existing MCU toolchains Automotive Application

I2C ARM Cortex A8 Cortex ARM Ethernet enclosure Audio Port x 1 Dual simultaneous 1080p display engine Cap/Res Touch LPI2C1 1GB DDR3 Network & Communication ENET Rj45 that runs on ARM Cortex - M7 Core Food Processing • Various OS support with suitable GUI framework More complex Graphical User Interfaces Processing Application JTAG I2C x 1 SDRAM Upto X 16 2D Graphics acceleration engine (GUIs) SEMC

• One stop Shop for all Hardware, Software and Mechanical Header Video Surveillance 512Mb with LCD Display and Camera Home Automation ARM 9 ARM 2008 HDMI 1.3 x 1 LPUART1/3

requirement of HMI ODM solution Technical & Quick customization support Systems RS485 x 2 Industrial HMI SOM & SBC & SOM

i.MX27 Saves time and money when SOM i.MX51x i.MX51x FlexSPI_B ARM Cortex A8 Cortex ARM FlexSPI_B • Long Term product support Audio Ports x 2 PCIe2.0 x 2 looking for MCU based approach for

------HyperFlash TI DM816x CPU QSPI Flash HEADER Giga Ethernet MAC x 1 USB2.0 Device HMI applications FLEXCAN1/2 CAN x 2 FlexSPI_A SPI x 1 FlexSPI_A Video IN x 2 Connector Edge Qseven Production Expansion LPUART8/CSI Debug UART RS232 x 1 Connectors Video OUT Micro SD Card USDH1 Development Platform SPECIFICATIONS CSI_[D6:D7] UART x 2 USB2.0 Host USB2.0 Hostx4 LPI2C1 USBHUB Processor Debug UART User LED GPIO1/FLEX CSI_[D2:D5] PIXCLK,MCLK,PWDN PWM4 CSI GPIOs RGB IF LVDS TI DM816x ARM Cortex A8 @ 1.2 GHz Expansion Connectors RGB-LVDS C674x DSP @ 1 GHz Gigabit Ethernet GMII x 1 SPI WIFI/ Memory HD Video IN x 2 Ports High Speed Design (upto 256Gbps) FLEX Buzzer BLUETOOTH EXPANSION 1GB DDR3 SDRAM Analog HD & SD Video OUT PWM4 LPUART2 Module CONNECTOR 128MB Nand Flash (expandable*) Audio McASP x 2 Ports Analog, Digital, Mixed Signal Hardware Design FlexSPI_B * Optional featured. Not supported by default On-board Micro SD Slot (default boot) UART x 2 Ports 30+ Layers PCB Design UART1(CMOS) GPIOs USB OTG USB_OTG1 Qseven Edge Connector UART8(CMOS) PCIe 2.0 x 2 Lanes JTAG Header Very Minimal / Zero cuts and Straps in First Prototyping Development Platform SPECIFICATIONS UART3(CMOS) HDMI 1.3 Temperature Design for Manufacturing and Design for Testability USB HOST USB_OTG2 SATA 2.0 x 2 Operating 0°C to +70°C 3D Motion SOC: Sensor: LPI2C1 LVDS, I2S Port Board Form factor Ecosystem Partners for Volume manufacturing Sensor i.MXRT105x ARM Cortex-M7 @ 600MHz 3 Axis accelerometer USB2.0 Host x 4 Qseven R1.20 Compatible (70mm x 70mm) Memory: Optional Features: USB2.0 Device Power Input Turnkey PCB Layout 256Mb SDRAM (Expandable upto 512Mb) Status LED Optional Features SD/SDIO 5V, 2A Signal Integrity & Power Integrity analysis 128Mb HYPERFLASH (Expandable upto 512Mb) Buzzer OS SUPPORT DELIVERABLES OPTIONAL KITS/MODULES CUSTOM DEVELOPMENT Micro SD Slot RTC SPI, I2C Operating Systems Default Features Linux 2.6.37 Dm816x Qseven SOM module DM8168 Qseven SOM Module BSP Development/OS Porting Audio McASP Port Linux 2.6.37 Minimum trace width/seperation of 3/3mils Display: Expansion Connector: Board Support Packages 7” LCD Display with Resistive touch Custom SOM/Carrier card development RGB Display(4.3",7",10.1")with Brightness UART x 3 Ports(CMOS) User manual Heat Spreader /Heat Sink Custom application/GUI development * Optional items are not supported by default Experience in HDI PCB-Buried and Blind Vias technology control I2C Design review and support CSI camera interface (Optional) SPI Communication: CSI 802.11b/g/n Wi-Fi Module + BLE 4.0/Antenna Operating Temperature: Can x 2 Ports -20°C to +60°C OS SUPPORT DELIVERABLES OPTIONAL KITS/MODULES CUSTOM DEVELOPMENT RS 232 x 1 Port Dimension: Free RTOS i.MXRT SBC Enclosure BSP Development/OS Porting RS 485 x 2 Ports 190mm x 150mm x 45mm Board Support Packages Power Module Custom Application/GUI Development Ethernet 10/100(MII/RMII) X 1 Port OS: Free RTOS User Manual Design Review and Support Enclosure design USB Host Power input: USB OTG 12V-24V Note: The Features/Protocols are Subjected to multiplexing. Hence, the features are supported based on Customers’ 31 30 Requirements.

35 34

OS/GUI

Security

Secure Transaction Secure Secure Boot Secure

OPTEE

Data Protection Data

Secure OS-Trust Secure

Cryptography Tamper Detection Tamper

SI and Thermal

Power Management Power

Drivers

Audio

HDMI VGA

DEM/DFT

Camera Display Port Display

TouchPanel

LCD User Interface User

Software Expertise

LTE 4G LTE

WiGig

ZigBee

NB-IoT

LoRa

Bluetooth

Wi-Fi Wireless

30+ Layers 30+ Diagnostics

PCB

Wired

RFID

Modbus

I2C, SPI I2C,

CAN

USB

PCIe

Ethernet Boot Loader Boot

H/W

Cloud

Firmware

37 ARINC818 Solutions

ARINC818 IP Core Supports full transceiver instantiation of uncompressed 4K Video, Audio & Metadata ARINC818 Fully Configurable IP, Delivery in 4 Weeks IP Core Link Rate: FC 1x, 2x, 3x, 4x & 8x Pixel Format: Monochrome, RGB, YCbCr, RGBA IP Ported on Intel, Xilinx FPGA & SOCs

ARINC818 Switch IP Core Supports up to 8 Channels of crosspoint switch Link Rate: up to 4.25Gb/s Per Link Smart Switching of Video Frames Real-Time Link Control & Monitoring Switching Method: Unicast, Multicast, Broadcast, Mixed

ARINC818 Protocol Convertor Card Transmission Medium: Optical or Copper Quick Customization as per Customer ICD Link Rate: Up to 4.25Gb/s 3G-SDI/DVI/HDMI to ARINC818 ARINC818 to 3G-SDI/DVI/HDMI

ARINC818 DVR Multiple ARINC818 Channels up to 4.25Gb/s Link Rate Simultaneous Recording H.264/H.265 Compressed Data Remote Access of Stored Data Transmission Medium: Optical or Copper

ARINC818 Protocol Analyzer Supports FC 1x, FC 2x, FC 3x & FC 4x Link Rate Linux GUI application for in-depth analysis Application Shows: Link Speed, Video Resolution, Video Timing etc Transmission Medium: Optical or Copper Trigger: Order Sets, Error, Immediate

ARINC818 Monitor Transmission Medium: Optical or Copper Supports any progressive resolution up to FullHD Link Rate: FC 1x, 2x, 3x, & 4x

38 Key FPGA IP Cores

SD/SDIO 3.0 Host & Slave

x86 Processor IP FPGA IP Cores sFPDP IP

SATA 3.0 Host & Bridge

AI / ML Solution

Deploy to iWave SOM Easily Supports Several CNNs

Run Multiple CNNs Simultaneously

Low Latency, High Performance Multiple Cameras Support

Latency IP, USB, SDI, HDMI, DP…

Targeted on Edge & Cloud Minimalistic, Less Power Reduced Costs

39 COTS Modules

3U VPX High-Speed Video / Data Processing Card

FPGA: Xilinx Kintex 7

RAM: 32-Bit 4Gb DDR3

128Mb SPI Flash, 1Gb BPI Flash (Optional)

16 x High Speed Transceiver @ 6Gbps

PCIe Gen2 up to x 8 lanes

HDMI IN & HDMI OUT

10/100/1000 Ethernet Health circuitry : P -bit, I-bit, C-bit 3U VPX High-Speed Video / Data Processing Card Form Factor : 3U VPX

PCIe based FPGA Processing / Acceleration Card

FPGA: Xilinx Kintex 7

RAM: 64-Bit 2GB DDR3 SODIMM

Dual SFP ports for Fiber Channel or 10GbE

Dual HDMI IN & OUT

PCIe Gen2 x4 lane

16 x High Speed Transceiver @ 12.5Gbps

Powered either through PCIe Host or Standalone powering support in the absence of PCIe host PCIe based FPGA Processing / Acceleration Card Form Factor : PCIe Half-Length

Cyclone V based 6U cPCI COTS

FPGA : Intel Cyclone V GT

RAM: 16-Bit 512MB DDR3

Support for both Front Panel & BackPlane Convertor

DVI Transmitter x 1

DVI Receiver x 2

SFP+ ports for Fiber Channel or 10GbE

Health circuitry : P -bit, I-bit, C-bit

Form Factor : 6U cPCI Cyclone V based 6U cPCI COTS

40 41 Product Summary

SMARC QSEVEN SODIMM FPGA SBC

i.MX8M Mini/Nano (Quad Cortex A53)

i.MX8QuadMax RZ/G1H ZU2/3/4/5 Pico ITX (Quad / Dual ARM Cortex A53) (Dual cortex A72 + Quad A53) (Quad Cortex A15 + Quad Cortex A7) ZU19/17/11 Zynq US+ MPSoC (Quad Cortex A53/Dual Cortex R5)

Zynq7000 (Dual Cortex A9 + FPGA)

RZ/G1M/G1N i.MX8QM/QP (Dual Cortex A15) (Quad Cortex A53 / Dual Cortex A72)

i.MX8M (Quad/Quad Lite/Dual cortex A53) RZ/G1E (Dual Cortex A7) ZU7/5/4 Zynq US+ MPSoC (Quad Cortex A53 + FPGA)

i.MX6 QP/DP/Q/D/DL/S i.MX6 Pico ITX (Multicore ARM Cortex A9) (Quad ARM Cortex A9) i.MX6 (ARM Cortex A9)

Snapdragon 820 i.MX6UL/ULL Arria 10 SoC (Quad Kryo) Cyclone V SOC (Arm Cortex A9) (Dual Cortex A9 + FPGA) RZ/G1C (Dual Cortex A9 + FPGA) (Dual Cortex A7)

Technology Partners Headquarters: INDIA JAPAN EUROPE USA iWave Systems Tech. Pvt. Ltd. iWave Japan, Inc. iWave Europe. iWave Systems USA. 7/B, 29 Main, BTM Layout 2 Stage, 8F-B, Kannai Sumiyoshi Building, Venkelbaan 55 1692 Westmont Ave., Bangalore-560076, India. 3-29, Sumiyoshi-cho, Naka-ku, 2908KE Capelle a/d IJssel Campbell, CA95008 Ph: +91-80-26683700, 26781643 Yokohama,Kanagawa, Japan. The Netherlands USA Fax: +91 80 26685200 Ph: +81 45 227 7626 Ph: +31 10 28403383 Ph: 408-206-5958 [email protected] [email protected] [email protected] [email protected] www.iwavesystems.com www.iwavejapan.co.jp Our Distributors Across the Globe

GLOBAL GLOBAL GLOBAL Arrow Electronics, Inc. Future Electronics Mouser Electronics, Inc. 9201 East Dry Creek Road 237 Hymus Blvd., 1000 N. Main Street, Centennial, CO 80112 USA Pointe Claire, Quebec, Mansfield, TX 76063,USA NA: +1-855-326-4757 Canada H9R 5C7. Tel: (817) 804-3800 [email protected] Tel: 514-694-7710 Email: [email protected] EMEA: +1-303-824-4000 Email: [email protected] [email protected] EMEA: +44 178 427 5000 Asia: +85224842484 [email protected] [email protected] Asia: [email protected]

NETHERLANDS, BELGIUM GERMANY/ DACH FRANCE Adelco Electronics BV EUROCOMPOSANT Venkelbaan 55 1, rue Rene Caudron - BP 15 2908 KE Capelle aan den IJssel, 78960 Voisins-le-Bretonneux, The Netherlands. France Tel: +31 (0)10 2580580, +32 (0)3 3374499 Tel: +33-130642600 Email: [email protected] Fax: +33-130436827 Email:[email protected]

USA Embedded Technologies, Inc Symmetron Business-Park River City, Leningradskoe Shosse 69, Building 1, Moscow, Russia, 125445. Tel: +7(495)961-2020 E-mail: [email protected]

BRAZIL SINGAPORE VLA Solutions Acte Solutions AB Excelpoint Systems (Pte) Ltd Rua Alcides Ricardini Neves, Box 4115, 15 Changi Business Park Central, 12 - Brooklin, São Paulo - SP, SE-171 04 Solna, #06-00 Singapore 486057 04575-050, Brazil Sweden. Tel: +65 6741 8966 Tel: +55 11 3938-0811 Tel: +46 8 445 2800 / 46 Fax: +65 6741 8980 Email: E-mail: [email protected] Email: [email protected]

Disclaimer

iWave Systems reserves the right to change details in this publication including but not limited to any Product specification without notice. No warranty of accuracy is given concerning the contents of the information contained in this publication. To the extent permitted by law no liability ( including liability to any person by reason of negligence) will be accepted by iWave Systems, its subsidiaries or employees for any direct or indirect loss or damage caused by omissions from or inaccuracies in this document. The registered trademarks are proprietary of respective owners. All registered trademarks and product names mentioned in this publication are used for identification purpose only.

Logos/images shown in this booklet are the properties of the respective owners.

iW-Product-Catalog-BR-R6.0 [email protected]