Exhibitors List (JIMTOF 2018)
Overseas EroJet Ltd,** J.G. WEISSER SOEHNE GmbH & Co. KG** PARAGON MACHINERY CO., LTD TE-SHIN CAM CO.,LTD. Etalon AG* JAGULAR INDUSTRY LTD.* PARKSON WU INDUSTRIAL CO., LTD. Tianhe (Baotou) Advanced Tech Magnet Co., Ltd. EURO-TECH CORPORATION** JAKOB Antriebstechnik GmbH** PB Swiss Tools TnC SHARK CO., LTD A～E EVERISING MACHINE CO. Jea Sheng Industry Co., Ltd PCM WILLEN SA* TOLTEC ENGINEERING CO., LTD.* ABSOLENT AB** EVORT ITALIA s.r.l.* JETON R/D & MFG. INC PEMTec SNC* Tongtai Machine & Tool Co., Ltd.* AFFOLTER TECHNOLOGIES SA* EVOSET AG** JFLO MACHINE TOOL ACCESSORIES CO LTD PERFECT MACHINE CO., LTD Trelleborg** AGATON AG* EWAG AG* Jia Cheng Electric Co., LTD PERONSPEED** TSCHORN** AIRMAJOR CO.,LTD* EWS Weigele GmbH & Co. KG** JIANGSU SWIFT MACHINERY TECHNOLOGY CO LTD PLATIT AG* tte srl* AKKO MAKİNA TAKIM HIRDAVAT SAN.VE TiC. LTD. ŞTİ.* EXACT MACHINERY CO.,LTD JIH-I MACHINERY CO., LTD.* PMI (Precision Motion Industries, Inc.)* TYROLIT-SCHLEIFMITTELWERKE SWAROVSKI K.G* ALBRECHT** EXOTUT srls* Jimmore International Corp.** PRECITRAME MACHINES SA* ALESA AG* Eyan Machine Tools Co., Ltd. JINAN BODOR CNC MACHINE CO.,LTD. Profiroll Technologies GmbH* U～Z alfa-sys ag** Jinan Dong Xing Granite Precision Measure Co. Ltd.* ProGrit GmbH* UJIN TECH. CORP Alfred H. Schuette GmbH* F～J JINAN SHANNENG TRADING CO.,LTD pro-micron GmbH** UNI MAGNETIC INDUSTRIAL CO.,LTD ALGRA S.p.A*. Felsomat GmbH & Co. KG* JINAN TMMT STONE CO.,LTD Quality Vision International Inc.* UNION MATERIALS CORP Alicona Imaging GmbH* FILTERMIST INTERNATIONAL LTD.** JINAN XINLEI PRECISION MACHINERY CO LTD REDEX SA* UNOMIC AM Technology Co.,Ltd* Fladder Danmark A/S JINN FA MACHINE INDUSTRIAL CO LTD REGG INSPECTION S.r.l. UTILIS AG** Apex Precision Technology Corp.* FLEURY SA** JIYGO REFRACTORY & ABRASIVE LTD REGO-FIX AG* Vapormatt Ltd,* Applied Automation Technologies FMT** Joen Lih Machinery Co., Ltd.* REGO-FIX AG** VARGUS LTD. Applitec Moutier SA* Fongei Industry CO., LTD. JUNG YUAN ENTERPRISE CO., LTD Rene Gerber AG* VARGUS Ltd.* A-RYUNG MACHINERY IND. CO., LTD. Forbes & Company Limited* RI HSIUNG PRECISION TECH. CO., LTD.* VEKTEK LLC Asmith Manufacturing Company Franz KESSLER GmbH** K～O Riello Sistemi SpA* VERTEX MACHINERY WORKS CO., LTD. ATA Tools, Inc.** FRiGGi SOITAAB** Kaifeng Besco Superabrasives Co.,Ltd Roeders GmbH Visiport ATE antriebstechnik und entwicklungs Fritz Studer AG* KAISER TOOL COMPANY, INC.** ROEHM GmbH WAGNER Werkzeugsysteme Mueller GmbH* GmbH & Co. KG** FUBRI s.r.l** KAO MING MACHINERY INDUSTRIAL CO.,LTD* Roesler Oberflaechentechnik GmbH** Walrus Pump. CO., LTD. AutoCam Technology Co.,LTD Fuqing Lanjin New Material Technology Co Ltd KAPP NILES GmbH & Co. KG** Rollomatic SA* WALTER MASCHINENBAU GmbH* Balance systems s.r.l.** Future Life Technology Co., Ltd. KASTO Maschinenbau GmbH & Co. KG** rose plastic AG* Werth Messtechnik GmbH* BC Technologies SA** GALDABINI s.p.a** Kelch GmbH* R-TECH** WFL Millturn Technologies GmbH & Co. KG Beijing Grish Hitech Co Ltd Gebr. Reinfurt GmbH& Co.KG** KENT INDUSTRIAL CO.,LTD S.C.M. srl* WIDIN Co., LTD. Beijing Moving-Goods Precision Racks Co.,Ltd Gebr. SAACKE GmbH & Co. KG* KEYARROW(TAIWAN)CO., LTD. SAFEWAY MACHINERY INDUSTRY CORPORATION* WIKUS-Sägenfabrik Wilhelm H. Kullmann Best Carbide Cutting Tools, Inc** GEMtool Co., LTD. KINGDOM ABRASIVE CO., LTD.* SAV Spann-Automations-Normteiletechnik GmbH** GmbH & Co. KG BESTDO GmbH* Georg Schlegel GmbH & Co. KG* Kirner Schleifmaschinen GmbH & Co. KG* Scandinavian Tool Systems* WILLEMIN-MACODEL SA* Blohm Jung GmbH* GIFU ENTERPRISE CO., LTD. Kohn Spannwerkzeuge GmbH** Schaeffler KG** WINSON MACHINERY CO., LTD.* BLUE PHOTON Technology & Workholding Systems LLC** GIN-YEH TECHNOLOGY INDUSTRY CO.,LTD KRACHT Schaublin Machines SA* WINTECH AUTOMATION CO., LTD botek** GIZIN INTERNATIONAL CO.,LTD.* KYOCERA SGS Precision Tools** SCHAUBLIN SA* WSEngineering GmbH & co.KG** BRINKMANN PUMPS K.H.Brinkmann GmbH & Co. KG GMN Paul Müller Industrie GmbH & Co. KG** L. KELLENBERGER & Co. AG* Schaudt Mikrosa Gmbh* Xiamen Golden Egret Special Alloy Co.,Ltd BUFFOLI TRANSFER S.p.A** Gnutti Transfer S.P.A.* LEE YEONG INDUSTRIAL CO.,LTD.* Schmid & Wezel GmbH & Co. Maschinenfabrik** Xiamen Toonney Alloy Co., Ltd BUMOTEC (Starrag Vuadens SA )** GOODCOMER CO., LTD.* LEISTRITZ PRODUKTIONSTECHNIK GMBH SEJINBITE Xi’an DongLong Precision Toolings Co.Ltd Carmex Precision Tools Ltd. Grintimate Precision Industry Co., Ltd.* Lenord, Bauer & Co. GmbH** SELICA INTERNATIONAL CO.,LTD. YAGER GEAR ENTERPRISE CO., LTD. Changchun Rongde Optics Co., Ltd. GSA TECHNOLOGY CO., LTD. LESTOPREX AG.** SEOAM MACHINERY IND. CO., LTD. Yangzhou Euro Brother Machine & Tools Co., Ltd. CHENG FENG CASTING FACTORY CO., LTD.* GUANGZHOU LINK AUTOMATION EQUIPMENT CO.,LTD Levicron GmbH Shandong Nano Advanced Materials Yantai Xin Chao Casting Co., Ltd. CHIA LERN CO., LTD.* GÜDEL AG** Levicron GmbH** Technology Co., Ltd. YEONG CHIN MACHINERY INDUSTRIES CO., LTD.* CHIN HUNG MACHINERY CO.,LTD. Guilin Digital Electronic Co., Ltd Li Hsing Precision Tool Co., Ltd. Shanghai YuHer Diamond Tool, Co. Ltd. YESTOOL CO.,Ltd.* CHING HUNG MACHINERY & ELECTRIC INDUSTRIAL CO., LTD.* HAAS Schleifmaschinen GmbH* Liebherr-Verzahntechnik GmbH SHINTEK MACHINERY CO., LTD.* YG-1 CO., LTD.** CHN-TOP SCI&TECH CO., LTD. HABOR PRECISE INC. Lien Chieh Machinery Co., Ltd SHUOS YI CO., LTD. YIH TROUN ENTERPRISE CO., LTD CHUNG PU LASER CO.,LTD.* HABRAMA GmbH** LISTA AG** SIEB & MEYER AG** YUAN JING PRECISION CO., LTD.* CITY TOOLS CO.,LTD* HANSUNG GT Co.,Ltd LNS Management SA Silmax S.p.A** YUAN JUN FONG CASTING CO.,LTD. Colibri Spindles Ltd.** Hebei Huayuan Machine Tool Accessories Co., Ltd. LOADPOINT BEARINGS** SIMTEK Präzisionswerkzeuge GmbH** Yuan Yi Chang (YYC) Machinery Co., Ltd. Compo Tech PLUS, spd.sr.o** Hebei Ruiao Machine Tool Accessories LOCKWOOD PRODUCTS, INC.** Sir meccanica S.p.A* YUANG HSIAN METAL INDUSTRIAL CORP.* Conoptica AS** Producing Co., Ltd. LUOYANG RUNBAO SUPER ABRASIVES CO., LTD SISA ABRASIVES CO LTD ZECHA Hartmetall Werkzeugfabrikation GmbH** CORET LTD.* HEB-Systemtechnik GmbH & Co. KG* LuoYang YuXin Diamond Co., Ltd. SMS** ZHEJIANG MEIRI INTELLIGENT MACHINERY CO., LTD Cosen Mechatronics Co.,Ltd* HENAN HOLD DIAMOND TECHNOLOGY CO.,LTD LUREN PRECISION CO., LTD. SOCO MACHINERY CO., LTD.* ZHEJIANG UTE BEARING CO LTD COUTH Industrial Marking Systems HENAN LILIANG DIAMOND CO LTD M.T. s.r.l. SPEED TIGER PRECISION TECHNOLOGY CO., LTD Zhejiang Yongxing Drill Manufacturing Co, Ltd Crevoisier SA** Henan Yuxing Sino Crystal Micron Diamond Co., Ltd. Maegerle AG Maschinenfabrik* steute Technologies GmbH & Co. KG Zhengzhou Best Synthetic Diamond Co.,ltd CY CARBIDE MFG. CO., LTD. HEYUAN FUMA CEMENTED CARBIDE CO.,LTD.** magafor** Strausak mikroverzahnungen AG** ZHENGZHOU DIAMOND PRECISION DAREX LLC* HG TECHNOLOGY CO., LTD. Magnetfinish GmbH* SUGANUMA ABRASIVES(FUZHOU)Co.Ltd** MANUFACTURING CO LTD Degen Maschinenbau GmbH* Hofmann Mess- und Auswuchttechnik GmbH & Co.KG** Mair Research S.p.A SU-matic AG* ZHENGZHOU HONGJI ABRASIVE TECH CO LTD deni AG** Hommel+Keller Präzisionswerkzeuge GmbH* MASTERCUT TOOL CORP.** SunUs Tech Co., Ltd. Zhuzhou Cemented Carbide Group Co., Ltd. detron Machine co.,Ltd Honsberg Metallsägen GmbH Matrix Machine Tool (Coventry) Ltd* Suzhou Huajiede Manufacturing Co., Ltd. ZZDM Superabrasives Co.,Ltd. DHF PRECISION TOOL CO., LTD.* HORN, Paul Horn GmbH MEGA MACHINE CO.,LTD Suzhou Yongtian Equipment Co., Ltd. DIMENSIONAL CONTROL, Inc.** HTT Tiefbohrtechnik GmbH MicroCentric Corporation** SycoTec GmbH & Co. KG** DINKLE ENTERPRISE CO., LTD.* HUAWIN PRECISION LTD. Mikron SA Agno TAI CHONG COMPANY, LTD DIXI** HUI BAO ENTERPRISE CO., LTD.* Mikron Tool SA** TAIWAN EXTERNAL TRADE DEVELOPMENT COUNCIL DLS schmiersysteme GmbH* Hunan Boyun-dongfang Powder Metallurgy Co.,Ltd ModuleWorks GmbH TAIWAN MARTINSU INC* DONGGUAN HIPPSC HARDWARE MACHINERY CO LTD HYPROSTATIK Schönfeld GmbH** Motorex AG* Taizhou Beiping Machine Tool Co.,Ltd Dontyne Systems Limited* IBAG Switzerland AG** OSBORN** TAJMAC−ZPS a.s** Dormer Pramet* IEMCA, A BUCCI AUTOMATIONS SPA DIVISION Osterwalder AG* Talleres MYL, s.a.u.** DT technologies CZ s.r.o. IMM Maschinenbau GmbH* OTT-JAKOB Spanntechnik GmbH** Tan Jia Precision Technology Co., Ltd DYC CO., LTD. INDEX-Werke GmbH & Co. KG* Otto Dieterle Spezialwerkzeuge GmbH** TDC Precision Tools Inc. ECHAINTOOL INDUSTRY CO., LTD.* IND-SPHINX PRECISION LTD (Unit B) TEAMWORK AUTOMATION (SHENZHEN) CO.LTD** … Co-Exhibitor P～T * ECONOMIC DAILY NEWS-CENS.COM* IND-SPHINX PRECISION LTD (Unit B)** Tebis AG **… Reprensented Company eifeler-Vacotec GmbH INPRO/SEAL COMPANY** PALMARY MACHINERY CO., LTD.* TECH WAY ADVANCED MATERIALS CO LTD ※Company names are as of 2018.
Access Tokyo Big Sight(Venue) Approx. 5 minutes
Approx. 14 minutes
Harumi Exit
Approx. 40 minutes
Approx. 30 minutes Guide to exhibit Daiwa Roynet Hotel Tokyo Ariake TOKYO
Approx. 25 minutes Tokyo Big Sight
Tokyo International Approx. 60 minutes Cruise Terminal
Approx. 55 minutes
Approx. 30 minutes
8 Why exhibit ?
1 0 000 2018
2018
3.6% 153,103 147,6 0 2 5.8%
136,19 6 128,674 About 74.5 % 29.3% 114 , 5 5 8 The trade fair that is among the first in the world to show cutting-edge technologies 7.1 % 14.3% JIMTOF is highly appreciated by industry participants from all around the world as a showcase that is among the first to introduce most advanced 6.8% 2010 2012 2014 2016 2018 technologies. Many exhibitors develop their new products with an eye to JIMTOF. 8.2% Over 150,000 visitors The top level quality and quantity! A wide range of visitors
In recent years, over 100,000 visitors attend JIMTOF continuously without being affected by the business situation. The ability to attract customers 2018 has a high reputation. 2018 2018
Complete joint program・Highly specialized information exchanging platform JIMTOF will host various joint programs where highly specialized informa- tion will be exchanged, including professional engineering conferences, lectures and seminars. Industry leaders will discuss their business strategies there.
Key Visual Concept of bisi ess erso
Interweaving technology, changing manufacturing Decision-making powers of JIMTOF 2018 Decisively Involved Involved in the Purchase in the Purchase JIMTOF is always an exciting showcase of cutting-edge, state-of-the-art products Decisively
and technologies. Recent years have seen notable advances in manufacturing ● Others optimization through IoT, automation, AI, and other technologies. Contributory ●
The world around us is full of technologies interweaving and reshaping the ● Others In an advisory ● manufacturing sector. capacity The key visual for JIMTOF 2020 captures that reality, highlighting how the event
In an advisory ● ● unspools strands of new technology into the global tapestry. capacity Contributory
1 2 【Achievement in the previous JIMTOF】 IMEC2018, Technological innovation needed for EV performance improvement, AI and IoT, Current state of AI applications and possibility in future, Taking over the family business
【Achievement in the previous JIMTOF】 Connected Industries SHOWCASE @JIMTOF2018 ~A New Era of Manufacturing IoT + Manufacturing = Challenge for ‘Connect’~, Fighting for the Win ~innovation and evolution in motor sports manufacturing~
0.5 0.2 2.3 2.6 Achieved all / partly 6.8 ● 96.9%
38.0 2018 58.9 90.7 153,103 12,934 1,085 320 5,524 49,716 28 39 15 71 22 2,048 200 2,248
3 4 Outline 1-4 Booth rental fees include the following: (1) Exhibition space during the trade fair as well as the delivery/removal periods. Name of Exhibition: Net Exhibit Space: (planned) (2) Exhibitor's badges. (The number of the badges provided differ according to the size of booth.) JIMTOF 2020 about 49,500 m2 (about 5,500 booths) The 30th JAPAN INTERNATIONAL MACHINE TOOL FAIR Indoor Exhibition Space: (3) Visitor invitations (The number of the visitor invitations provided differ according to the size of booth.) Purpose: For the contribution to the development of industry and 98,540 m2 (East & West halls) (4) Listing on the Official Guidebook.*1 trade promotion through increased international Exhibits: Machine tools (Metal cutting, Metal forming) (5) Listing on JIMTOF official website.*1 transactions and technical exchanges of machine tools Machine tool accessories/ Tools for machines(Cutting tool & 1 and their related equipments. wear-resistant tool) / Diamond, CBN tools * Listing of co-exhibitors and represented companies costs additionally. (Please refer to 2-2-(2) for "co-exhibitors and represented companies".) Date: December 7 (Mon.) - December 12 (Sat.), 2020 (6 days) Grinding wheels and abrasives /Gears and Gear Devices Opening Hours: 9:00 - 17:00 (9:00 - 16:00 on last day) Oil hydraulic, water hydraulic and pneumatic machinery 1-5 Payment of utility usage and service fees(after the trade fair): Venue: Tokyo Big Sight (Tokyo International Exhibition Center) Precision measuring machines and instruments We charge for the utility usage and service as below after the trade fair. Organizers: Japan Machine Tool Builders' Association Optical measuring instruments/ Testing machinery Tokyo Big Sight Inc. Controller and related software (CAD/CAM etc.) (1) Use of electricity, water supply & drainage, compressed air, communication equipment, and flooring works Supporting Organizations: (to be confirmed) Other associated machinery and equipment, raw materials, (2) Visitor Invitations' fee beyond the provided number Ministry of Economy, Trade and Industry technologies and publications (3) Use of meeting or conference rooms Tokyo Metropolitan Government (Please refer to "Classified List of Exhibits" page 13.) The Japan Chamber of Commerce and Industry Qualified Exhibitors: (4) Advertisements on the organizer-issued printed materials Cooperating Organizations: Business engaged in the design, manufacture or sale of (5) Utilizing Visitor Registration System Japan Machine Tool Importers' Association the "Exhibits" listed above as well as the industry (6) Organizing Exhibitor Workshops Japan Forming Machinery Association associations thereof, and other organizations that may Japan Precision Machine Association concern. An Agent is required to submit the manufacturer's (7) Publication of information on co-exhibitors and represented companies in the official guidebook and on the official website. Japan Cutting & Wear-resistant Tool Association consent form or proxy to Organizers. Exhibitors must (8) Other service provided by the Organizer Japan Machine Accessory Association exhibit their products in full duration of the opening period, *Please see the "Exhibitors Manual" for more details. Japan Precision Measuring Instruments Manufacturers Association and be resident at their booths. 2 Japan Grinding Wheel Association Booth Unit Size: 9m (3m x 3m) 1-6 Any Charges, Fees and Commissions Industrial Diamond Association of Japan Admission: All visitors and exhibitors are requested to register. Japan Optical Measuring Instruments Manufacturers' Association Site Layout: Classified display of the exhibits above in principle. All banking charges not only outside Japan but also inside Japan (such as Remittance Charge, Yen Exchange Charge, Japan Fluid Power Association Correspondent Bank Charge, Lifting Charge, other charges, fees and commissions) and other costs related to the payment Japan Testing Machine Association Japan Gear Manufacturers Association shall be borne by the Exhibitors. If the full payment is not made, organizers demand payment for the shortage with handling fee. Handling fee will be charged up to JPY10,000.
General Regulations 2. Exhibition Application and Agreement 2-1 Application Period
Application Period 1. Booth Rental Fees Members of Organizers, Cooperating Organizations, and Overseas Associations 9:00 a.m. Oct 1(Tue) – 11:59 p.m. Oct 31(Thu), 2019 Size Per Booth Consumption Tax（10%）* Total Non-members (Domestic/Overseas) 9:00 a.m. Nov 1(Fri) – 11:59 p.m. Nov 30(Sat), 2019
Organizers' Members JPY 270,000 JPY 27,000 JPY 297,000 *Please note that applications will only be accepted during the above period. Applications are not accepted outside the above period Japan Time. *Applications ARE NOT handled on a first-come-first-served basis. Organizers decide to receive an application taking the classification of exhibits into account. 2 Members of Cooperating Organizations, 9m *Some application may not be accepted as stated in 2- 4. (Please refer to P. 8.) JPY 300,000 JPY 30,000 JPY 330,000 and Overseas Associations (3m×3m) Non-members 2-2 Application to exhibit JPY 360,000 JPY 36,000 JPY 396,000 (Domestic/Overseas) （1） Please make your application online via JIMTOF2020 official website by using the "Exhibitor Application * The consumption tax rate as of the last date of removal (Monday, December 14, 2020) will be applied regardless of the date of payment for the exhibition. Form." No other method of application will be accepted. If the consumption tax rate is changed due to the Consumption Tax Act, the consumption tax amount will be changed. If you are a first-time exhibitor at JIMTOF, please submit documents with a summary of your exhibit items and your company information via post or email. (See “Classified list of Exhibits” p.13). 1-1 The "Overseas Associations" are associations which had taken part in the International Information Center at the （2） In the case of multiple companies applying to exhibit using the same booth, one company shall conduct all the 27th,28th and 29th JIMTOF. Overseas government agencies which Organizers admit have same conditions as overseas necessary procedures as a representative, including the application, payment of various fees, etc. associations. For exhibitors who are not the representative exhibitor: *For participation in the past three exhibitions, contact: Japan Machine Tool Builders' Association (Please refer to P.7) ● Those with their company's own employees, products, and services provided at the exhibit booth shall be considered "Co-exhibitors." 1-2 A 10% discount granted for the application of 21 booths or more. (No discount granted for 20 booths or less) ● Those without their company’s own employees at the exhibit booth but with their own products and services, For example, if a member of an overseas association applies for 30 booths, provided shall be considered "Represented Companies." 1-20 booth: 20 booths x JPY300,000 = JPY6,000,000 After approval of the exhibitor application, co-exhibitors and represented companies may register separately for a fee. 21-30 booth: 10 booths x JPY270,000 = JPY2,700,000 （3） When a trading company or distributor applies as an exhibitor on behalf of a manufacturer, please submit a 10% Consumption Tax: JPY870,000 TOTAL AMOUNT: JPY9,570,000 written agreement or authorization letter from the manufacturer of the products via post or email, at the time of the application. The format does not need to be standardized. Furthermore, if applying on behalf of an exhibitor etc. that 1-3 Booth specifications: is an overseas manufacturer, the written agreement or authorization letter must be in Japanese or English. Space Only (If Exhibitors need partitions, Organizers will prepare partitions that they have. The partitions make the booth space （4） The person making the application must have authority within the applicant organization for signing a contract to a little bit smaller by their thickness.) exhibit at this trade fair. *For package booths including basic decorations, please refer to "Exhibitors Manual". （5） Should any of the information provided on or with the application change at a later date, please notify the JIMTOF Fair Management Office at Tokyo Big Sight Inc. as soon as possible and obtain its approval.
5 6 Contact details : (for the exhibitor application form / general inquiries) 2-4 Application Acceptance and Booth Adjustment Tokyo Big Sight Inc. JIMTOF Fair Management Office After receipt of the application, Organizers will notify the applicant in writing as the official acknowledgement by the end of 3-11-1 Ariake, Koto-ku, Tokyo 135-0063 JAPAN Tel: +81-3-5530-1333 Fax: +81-3-5530-1222 E-mail: [email protected] January 2020. However, there might be cases that Organizers coordinate the number of the booths requested or cannot www.jimtof.org accommodate the application taking previous exhibit records of applicants into account when total demand exceeds the exhibition floor capacity or reviews of the application reveal irregularities. In these cases, Organizers will notify such applicants Contact details : (for the Members of Organizers and Cooperating Organizations below) in writing by the end of January, 2020. In this regard, Organizers or the cooperating organizations shall not be liable for any Matters such as payment methods vary for each organization. Please contact your associated organization. damage caused by rejection of the application or reducing the number of booths.
Organization TEL FAX E-mail Web Site Japan Machine Tool Builders' +81-3-3434-3961 +81-3-3434-3763 [email protected] http://www.jmtba.or.jp Association Japan Machine Tool Importers' 2-5 Payment Terms +81-3-3501-5030 +81-3-3501-5040 [email protected] https://www.jmtia.gr.jp Association Japan Forming Machinery Organizers will send the applicant the first invoice for the half amount of the total booth rental fees as subscription money, +81-3-3432-4579 +81-3-3432-4804 [email protected] https://j-fma.or.jp Association together with the official acknowledgement by the end of January, 2020, which the applicant shall remit to the specified bank Japan Precision Machine Association +81-3-3431-5054 +81-3-3434-6955 [email protected] http://www.japma.jp/ account by the due date stated on the invoice. Then, Organizers will send the applicant the second invoice for the balance of the total booth rental fees by the end of April, 2020, which the applicant shall remit to the specified bank account by the Japan Cutting & Wear-resistant Tool +81-3-3526-6200 +81-3-3526-6301 [email protected] http://www.jta-tool.jp/ Association due date stated on the invoice. (Bank handling charges are the liability of the applicant.) In case the applicant is a member of Japan Machine Accessory +81-3-3431-4103 +81-3-3434-2613 [email protected] http://www.jmaa.or.jp/ cooperating organizations, the organization may handle billing and collection of the fees on behalf of Organizers. Association Japan Precision Measuring +81-3-3434-9557 +81-3-3434-1695 [email protected] http://www.jpmia.gr.jp Instruments Manufacturers Association Japan Grinding Wheel Association +81-3-3431-5644 +81-3-3431-5645 [email protected] http://www.jgw-asn.com 2-6 Cancellation or Modification of Application Industrial Diamond Association +81-3-3580-0849 +81-3-3580-0840 [email protected] http://www.ida-j.com of Japan Organizers will not accept cancellation or modification of the application after it is approved, except for the case in which Japan Optical Measuring Instruments +81-3-3435-8083 +81-3-3435-8083 [email protected] https://www.j-oma.jp/ Organizers exceptionally approve them after receipt of written requests from the applicant. In case of cancellation, Organizers, Manufacturers' Association or the cooperating organizations will not refund the paid-up amount to the applicant, regardless of the reasons for it. Japan Fluid Power Association +81-3-3433-5391 +81-3-3434-3354 [email protected] http://www.jfpa.biz
Japan Testing Machine Association +81-3-5289-7885 +81-3-5289-7889 [email protected] http://www.jtma.jp Japan Gear Manufacturers +81-3-3431-1871 +81-3-3431-1872 [email protected] http://www.jgma.org/ Association 2-7 Exhibition Space Allocation Organizers will decide on the allocation of the exhibition space (please refer to Article 3 of "The Provision of Exhibition Agreement," page 11) and will notify the applicant of the space allocation, with the second invoice. The applicant has no right to 2.3 Application Schedule (It may be changed according to the situations) oppose or demand changes with respect to the allocated exhibition space. Also, the applicant is not allowed to conduct such Exhibit Payment actions on part or all of the allocated exhibition space as selling/buying, collateralizing, transfering or lending to any third party, except for co-exhibitors and represented companies. (Please refer to 2-2-(2) for "co-exhibitors and represented companies".) End of January 2020 Notification of application acceptance The 1st invoice for the half amount of the total booth rental fees
End of February Payment Deadline for the half amount of the total booth rental fees 2-8 Exhibition Agreement End of April Notification of the booth location The 2nd invoice for the balance of the total booth rental fees The exhibition agreement shall take effect from the date when Organizers confirm the full payment of the booth rental fees by the applicant. After the effective date, the applicant will have the right as an exhibitor to use the allocated exhibition space. If May Payment Deadline for the balance of the total booth rental fees the payment is not made by the specified due date, the agreement shall not take effect, and therefore the applicant will not have the right to use the exhibition space. In this case, Organizers, or the cooperating organizations will not refund the paid-up Exhibition Agreement amount to the applicant, regardless of the reasons for it.
May - June Exhibitor Briefing (Tokyo, Osaka, Nagoya)
June - December Submit all of the application documents for services 2-9 Cancellation or Modification of Exhibition Agreement Organizers will not accept cancellation or modification of the exhibition agreement after it is concluded, except for the case in December Delivery period (Time periods differ according to exhibitor) which Organizers exceptionally approve them after receipt of written requests from the exhibitor. Organizers will not refund the paid-up amount to the exhibitor because of the cancellation or the reduced amount because of the modification, regardless December JIMTOF 2020 Date: December 7 (Mon.) - December 12 (Sat.), 2020 of the reasons for them. If the exhibitor loses the qualification of the member of cooperating organizations or overseas associations, the agreement shall be automatically changed, and the status of the exhibitor shall be changed to the "Non- December Removal period (Time periods differ according to exhibitor) member". In this case, Organizers will additionally charge the exhibitor with the difference of the booth rental fees. If the exhibitor does not start using the allocated exhibition space by 13:00 on December 6, 2020, Organizers will take it as the February 2021 The invoice for the utility usage and service fees cancellation of the agreement, and the exhibitor will lose the right to use the space. In this case, Organizers will not refund the paid-up amount to the exhibitor. Furthermore, Organizers or the cooperating organizations shall not be liable for any damage March The issue of Final Report for JIMTOF2020 caused by such actions.
7 8 3. Display and Decoration 4. Handling of Fire and Hazardous Materials Annexed Table of the Fire Service Law 4th Group 3-1 Decoration Height Requirements The exhibitor is not permitted to use open flame or to bring hazardous materials in Name Property Specified Volume (Lit) the exhibition area by The Fire Prevention Ordinance in Tokyo, except for the case Special flammable 50 All decorations including lighting must be confined to a maximum height of 3.0m (refere to the picture A below). However, the in which they obtain the written permission in advance from the local fire station height limit for decorations rises up to 6.0m in the area which is 3.0m away from passage-ways, adjacent booths and walls 1st Class water insoluble 200 under jurisdiction. Even in the case of the permission from the fire authorities, (refer to the picture B below. Banners are the exceptions. Please see "3-4 Banners in Booths"). For reasons of fire safety, the Petroleum there might be a limit to the amount of hazardous materials that can be brought water soluble 400 construction of roofed or covered booths and decorations over 3.0m high are limited to the approval of Organizers. Exhibitors in, which is determined by the layout of the hazardous materials in the booths, Alcohol 400 wishing to include any of these contradictions must apply and submit blueprints to Organizers to obtain permission. After and the surrounding conditions. Also, the exhibitor is not permitted to operate consulting with the Fire Department, Organizers will study the drawings and advise the Exhibitor as to the location of smoke 2nd Class water insoluble 1,000 machines containing oil in excess of specified volume. If the exhibitor apply an detectors and the necessity to install package-type fire extinguishing equipment or fire extinguishers (the cost of installation will Petroleum water soluble 2,000 amount of huzardous materials that exceeds the specified volume, organizers will be the responsibility of the exhibitor). There is no height limit for the exhibits, however, please check with the application form adjust the number. 3rd Class water insoluble 2,000 and notify Organizers when the exhibit is over 3.0m. The "open flame" means a device or an object that generates a flame or spark, Petroleum water soluble 4,000 or a device the heating unit of which is exposed to the outside. The "hazardous Plane view Vertical view 4th Class Petroleum 6,000 A Stereograph materials" indicates gunpowder, combustible gas, and other materials listed on 3.0m the annexed table of the Fire Service Law, 4th group. (See the annexed table.) The Animal and vegetable oil 10,000 exhibitor who wants to use these hazardous materials in the trade fair is requested Per one section 3.0m 3.0m 3.0m to notify the effect in the application form. Also, the exhibitor can contact Organizers for the reference materials or more detailed information. 3.0m B FL
A 6.0m 5. General Information B Plane view Vertical view 3.0m 5-1 Retail Sales The on-site sale of exhibit items is strictly prohibited during the trade fair period. This instruction does not apply to any printed materials regarding the exhibited items. Passageway 3.0m 3.0m 3.0m 3.0m 5-2 Cancellation of Trade fair 6.0m The organizers may be forced to cancel the trade fair due to causes not attributable to organizers such as natural disasters or 3.0m acts of God. The organizers, however, shall not be liable to the exhibitor for any damage caused by the cancellation. FL 5-3 Change of Trade fair Schedule and Opening Hours or the Site Scale Height Limit A： Lower than 3.0m The organizers may be forced to change the trade fair schedule and its opening hours or the site scale due to causes which In the case of double-row booths, decorations higher than 3.0m are not permitted (as well as thin panels or signs). are not attributable to organizer such as natural disasters or acts of God. The exhibitor cannot cancel or modify the application B： Lower than 6.0m or the agreement based on such changes. Also, the organizers shall not be liable to the exhibitors for any damage or the 3-2 Eased restrictions on the height for installation of lighting equipment added costs caused by the changes shown above. 5-4 Organizers' Care and Exemption from Liability Only when exhibitors, which occupy 15 or more exhibition stand units, meet the following requirements, they shall be able to install lighting equipment measuring up to 6.0m in height, with no setback away from passage-ways and a 1.0m setback from The organizers shall exercise their due care for the management, maintenance, protection and preservation of the entire the adjacent booths. exhibition hall and the exhibits. The organizers, however, shall bear no liability for any damage or pilferage loss of the exhibits (1) If lighting equipment measuring up to 3.0m in height cannot apply enough light in showing exhibits to visitors due to the and other displayed items due to causes which are not attributable to organizer such as natural disasters or acts of God. characteristics of these exhibits (for example, when a large machine is displayed at the edge of a passage). 5-5 Compensation for Damages (2) If it is considered that the lighting equipment measuring more than 3.0m, which should be placed in an exhibition stand set The exhibitor shall take full responsibility for any damage to the facilities, building structures of the venue, or persons caused adjacent to a wall of the venue, does not affect the view of other companies' exhibition stands. (3) The exhibitor has submitted an installment plan document to the organizer in advance and has obtained permission. by the negligence of the exhibitor, its agents or representatives. (4) The lighting equipment should meet the following requirements: 5-6 Responsibility for Payment ① The lighting equipment should consist of lighting that applies light to exhibits and the support structure and should not Exhibitors will pay all booth rental fees and other expenses invoiced by the organizers and bear responsibility until all payment have a decorative factor. are completed. ② Their shapes should enable the lighting to be installed on the top of the support structure. 5-7 Bonded Display Area ③ The support structure must be necessary for the installation of the lighting. The organizers will apply for the designation of bonded display area so that the exhibits can be displayed as bonded items. ④ The lighting and its support structure should not have any factors suggestive of certain companies such as the name of exhibitors and logos. The exhibitor who wants to display the exhibits as bonded items is requested to notify Organizers in advance by indicating to ⑤ The color of appearance should be a simple color such as white, black, or silver, and should not extremely stand out. the effect in the application form. 5-8 Issuance of documents necessary for exhibitor Visas 3-3 2-Story Booth (Three or more stories are not permitted.) The organizers will not issue documents necessary for exhibitors Visas such as an invitation guarantee letter. At JIMTOF 2020 there will be no fees levied on 2nd floor space; however, a 2-story structure may only be erected by exhibitors 5-9 Observance of Regulations who have contracted for 15 booths or more at that location. Also, 2nd floor space may only be used for business meetings. The exhibitor shall observe the regulations laid out in the "General Regulations", "The Provision of Exhibition Agreement", Full details of conditions applying to such structures will be made available in the "Exhibitors Manual." "Exhibitors Manual" and other regulations established by the organizers. The organizers reserve the right to cancel the application or the exhibition agreement if the exhibitor fails to observe the regulations. In this case, the organizers shall not be 3-4 Banners in Booths liable for any damage to the exhibitor caused by such actions. More than 21 booths of exhibit at one location may apply for banner. For security reasons, Organizers will make and put up all banners for the Exhibitors at the Exhibitors' expense. 5-10 Jurisdiction and Interpretation of Agreement Any litigation between the organizers and the exhibitor arising from the "General Regulations", "The Provision of Exhibition 3-5 Decoration Materials Agreement", "Exhibitors Manual" and other regulations established by the organizers shall fall under the jurisdiction of the All materials used for decorations must be approved as fire proofed by the Japanese Fire Defense Law. Exhibitors wishing to Tokyo District Court. In this case, all the regulations shall be interpreted on the basis of the Japanese language version of the use materials approved by overseas laws are required to submit a written notice as required along with a product sample to agreement and in accordance with the laws of Japan. Japan Fire Retardant Association for quality assurance certification in order to prove that the materials meets the applicable standards. *For more details about displays and decorations, including regulations above, please refer to "Exhibitors Manual".
9 10 The Provision of Exhibition Agreement for JIMTOF 2020
(2) If the Exhibitor fails to take such measures promptly as requested under ■ Article 17 - Restoration to Original Condition the preceding Paragraph, TBSI shall be entitled to take any measures (1) The Exhibitor shall return the Exhibition Space to TBSI after removing The Applicant and Tokyo Big Sight Inc. ■ Article 7 - Period of Usufructuary Right deemed necessary at the Exhibitor's expense. In such a case, TBSI shall all exhibits, booth display and all other fixtures and equipment set up by The Exhibitor may use the Exhibition Space for the fair period, from December not be liable for any resultant loss or damage which may be incurred by the (hereinafter referred to as "TBSI") agree with and the Exhibitor within the Exhibition Space at its own expense, and restore 7 to 12, 2020, and the delivery/removal periods as assigned by TBSI. Exhibitor. the Exhibition Space to its original condition (these acts are hereinafter observe this "The Provision of Exhibition Agreement for However, the Exhibitor shall lose its usufructuary right once the Exhibitor (3) TBSI shall not be liable for any loss or damage arising from any damage is deemed by TBSI to have restored the Exhibition Space to its original referred to as "Restoration to Original Condition") by the expiration of the JIMTOF 2020" (hereinafter referred to as caused to, or theft of, the Exhibitor's exhibits, booth display or other items period of usufructuary rights to the Exhibition Space or cancellation of the condition as stipulated in Article 17 prior to the expiration of said period. due to any cause not attributable to its fault including natural disasters and "JIMTOF 2020") to be held from Agreement. ■ Article 8 - Prohibition of Assignment of Exhibition Space acts of God. (2) When the Exhibitor fails to carry out Restoration to Original Condition December 7 to 12, 2020. The Exhibitor may not pledge, hypothecate, assign or sublet all or any ■ Article 12 - Exhibitor's Care pursuant to the preceding Paragraph, the Exhibitor shall be deemed to part of the Exhibition Space to any third party, whether consideration or have waived its rights of ownership to any and all exhibits, decor and other (1) The Exhibitor shall, on its own responsibility and cost, exercise its due otherwise, nor exchange it with another Exhibitor. However, that this shall articles found in the Exhibition Space, and TBSI may dispose of any such not apply in case where a part of the Exhibition Space is to be used by care for the proper management of its exhibits, booth display and other article as it sees fit at the Exhibitor's expense. The Exhibitor may not make or sublet to a Co-exhibitor or Represented company who has filed a prior such items during the fair period as well as the delivery/removal periods. In any demand nor raise any objection in connection therewith. ■ Article 1- Application for Exhibition and Agreement written notification with and received approval from TBSI in advance. the course of delivery, removal and exhibition of the exhibits, and of their (3) In carrying out Restoration to Original Condition of the Exhibition Space, The applications for both the exhibition and the exhibition agreement shall demonstration, the Exhibitor shall endeavor to contribute to the smooth the Exhibitor may not petition for the purchase of any of its exhibits, decor take effect when TBSI receives the application form from the Applicant. ■ Article 9 - Cancellation or Modification of Exhibition Agreement operation of the fair in accordance with the provisions of this "The Provision and other articles, demand payment of eviction compensation, nor make (1) The Exhibitor may not cancel or modify any part of this exhibition of Exhibiton Agreement", "General Regulations", "Exhibitors Manual", and any other claim whatsoever to TBSI. ■ Article 2 - Subscription Fee agreement, except the case in which TBSI exceptionally approves the other regulations established separately by TBSI. (1) TBSI shall send the Applicant the first invoice for the half amount of the cancellation or modification after receipt of written requests from the (2) The Exhibitor shall be liable for any loss or damage inflicted on TBSI or any ■ Article 18 - Prohibited Acts total booth rental fees as subscription fee that shall be calculated on the Exhibitor. In case of cancellation, TBSI shall not be required to refund any third parties caused by the negligence of the Exhibitor or any of its agents (1) The Exhibitor may not resort to any of the following acts: The sale of size of the exhibition space allocated as stipulated in Article 3 together amount of fees already received, regardless of the reason. Even if such or representatives. exhibits on the spot (excluding books concerning exhibited articles or to with the official acknowledgement of the exhibition application. The modification gives rise to a reduction of the amount of fees are already (3) The provisions of Paragraphs (1) and (2) relating to the liabilities of the the extent otherwise approved by TBSI) Applicant shall pay the amount by remittance to the bank account by received, TBSI shall not be required to refund any such fees. If the Exhibitor Exhibitor shall be mutatis mutandis applied to the liabilities of the Co- (2) The display of exhibits, execution of booth display, or engagement in advertising such as distribution of catalogs at any site within the venue the due date, all of which are as per specified in the invoice. In cases loses the qualification of the Member, the Agreement shall be automatically exhibitor or Represented company. changed, and the status of the Exhibitor is also changed to the "Non- other than the allocated Exhibition Space, except to the extent otherwise that TBSI exceptionally approves the written requests of the application (4) The Exhibitor shall be jointly and severally liable with the Co-exhibitor or approved by TBSI beforehand cancellation from the Applicant or the payment of the subscription fee from member". In this case, TBSI will additionally charge the Exhibitor with the Represented company with respect to the liabilities of the Co-exhibitor or difference of the booth rental fees. (3) Any act that may cause trouble to other exhibitors, visitors or TBSI the Applicant is not confirmed by TBSI by the due date, the application Represented company under Paragraphs ( 2) and ( 3) as mutatis mutandis (2) If any of the following events should occur with the Exhibitor, TBSI may (4) Any act that may cause damage to the venue building, facilities or site shall be deemed cancelled and lost its effect. In this case, TBSI shall not be applied by the immediately preceding paragraph. cancel or modify the exhibition agreement without any prior notification. In including the Exhibition Space required to refund any amount of fees already received, regardless of the this case, TBSI shall not be required to refund any amount of fees already (5) Any act prohibited in this "The Provision of Exhibition Agreement", reason. ■ Article 13 - Exhibits "General Regulations", "Exhibitors Manual" or other regulations established received, regardless of the reason, or shall not be liable for any resultant (1) The Exhibitor may exhibit only such articles as designated in the "Outline of separately by TBSI. (2) In case that the Applicant is a Member and the organization itself charges damage which may be incurred by the Exhibitor. If the exhibition agreement the "Guide to Exhibit" and approved as such by TBSI beforehand. the Applicant with the subscription fee, the payment to the organization by is cancelled during the fair period, the Exhibitor must cancel all exhibition ■ Article 19 - Observance of Regulations the Applicant shall be deemed the payment to TBSI. (The same shall apply (2) If the Exhibitor exhibits any article in violation of the preceding Paragraph, actions and restore the Exhibition Space to its original condition at the The Exhibitor shall observe the provisions laid out in this "The Provision of with respect to both the payment and receipt of the subscription fee under TBSI may require the Exhibitor to remove said article immediately at the Exhibitor's expense as stipulated in Article 17 of this Agreement and return Exhibition Agreement", "General Regulations", "Exhibitors Manual" or other this Agreement.) Exhibitor's expense. In such a case, the Exhibitor shall immediately remove same to TBSI. regulations established separately by TBSI. TBSI may, under compelling the article in question from its exhibits. 1) If the Exhibitor is deemed likely to contradict the purpose of the fair. circumstances, modify any of these regulations. The Exhibitor hereby (3) If the Exhibitor fails to remove the article immediately as required under the ■ Article 3 - Exhibition Size and the Location 2) If the Exhibitor is deemed likely to disturb public order or offend good morals. agrees to such modification beforehand, and undertakes to observe the terms of the preceding Paragraph, TBSI shall be entitled to remove said The size of the exhibition space shall be determined by TBSI through booth 3) If the Exhibitor is deemed likely to cause trouble or material inconvenience modified regulations. adjustment based on the number of booths applied for by the Applicant, to other exhibitors. article from the exhibits, and take other measures deemed appropriate and notified the Applicant with the official acknowledgement. TBSI shall 4) If the Exhibitor is deemed likely to cause damage to the venue building, by TBSI at the Exhibitor's expense. In such a case, the Exhibitor may not ■ Article 20 - Handling of Personal Information notify the Applicant of the location of the exhibition space after the booth or equipment and facilities installed therein. place any demand or raise any objection against any such measure, and When handling personal information, the Exhibitor at JIMTOF 2020 must allocation is determined. The Applicant shall have no right to object to the 5) If the Exhibitor is deemed as a crime syndicate, a member of a crime TBSI shall not be liable for any resultant loss or damage which may be handle, manage and use the information in a suitable manner compliant allocation of the exhibition space or request change of the exhibition space syndicate, an affiliate of a crime syndicate, a corporate extortionist, a incurred by the Exhibitor. with the provisions of the Personal Information Protection Law and related social activist, etc. (collectively referred to as "antisocial forces"), or if it is laws and regulations of Japan. Exhibitors must publish and issue notice determined by TBSI. (The size and location of the exhibition space are ■ Article 14 - Fees Payable for Use of Facilities hereinafter referred to as the "Exhibition Space".) deemed that the exhibitor is not fit to the fair. regarding the purposes for which the information is used and use the 6) If any misrepresentation is discovered in the application form for the fair. (1) When the Exhibitor finds it necessary to use the facilities and services information only within that scope. In the event of a dispute between the Article 4 - Booth Rental Fees 7) If TBSI withhold their consent to any changes in the Exhibitor's provided by TBSI, the Exhibitor must go through the formalities prescribed Exhibitor and a person to whom the personal information pertains, the ■ statements included in the application form for the fair. in the "Exhibitors Manual" separately established by TBSI and pay the Exhibitor shall resolve the dispute at the Exhibitor’s responsibility. (1) TBSI shall send the Applicant the second invoice for the remaining half 8) If the Exhibitor breaches any of the provisions of this "The Provision of prescribed fees by the prescribed due date. ■ Article 21 - Jurisdiction amount of the total booth rental fees. The Applicant shall pay the amount Exhibition Agreement", "General Regulations", "Exhibitors Manual" or (2) The Exhibitor shall apply for and be liable for the payment of the fees Both parties hereto agree that the Tokyo District Court shall have by remittance to the bank account by the due date, all of which are as per other regulations established by TBSI, or otherwise fails to comply with and any other necessary procedures for the Co-exhibitor or Represented jurisdiction over any litigation between the parties arising from this "The specified in the invoice. TBSI's instructions. company's use of the facilities and services provided by TBSI. (2) In case that the Applicant is a Member and the organization itself charges 9) If any of the foregoing events occurs with the Co-exhibitor or Provision of Exhibition Agreement". In the case of such proceedings, all the Applicant with the booth rental fees, the payment to the organization by Represented company. ■ Article 15 - Booth Display provisions shall be interpreted on the basis of the Japanese language version of this "The Provision of Exhibition Agreement" and in accordance the Applicant shall be deemed the payment to TBSI. (The same shall apply 10) If the Exhibitor fails to remit the prescribed fee by the prescribed due date. (1) The Exhibitor shall, on its own responsibility and at its own cost, execute with the laws of Japan. with respect to both the payment and receipt of the booth rental fees under 11) If the Exhibitor is otherwise deemed to constitute a hindrance to the decorative work within the Exhibition Space. management and operation of JIMTOF 2020. this Agreement.) (2) In executing said decorative work, the Exhibitor shall abide by the relevant ■ Article 22 - Status of the Organizations ■ Article 10 - Change of Schedule and Cancellation of Fair provisions of the "Exhibitors Manual" established separately by TBSI. In case where TBSI entrusts the other organizer and/or any of the ■ Article 5 - Any Charges, Fees and Commissions (1) TBSI may change the dates and the site scale of the fair or cancel holding (3) If the Exhibitor executes booth display in violation of the preceding cooperating organizations regarding JIMTOF2020 in respect of the receipt All banking charges not only outside Japan but also inside Japan (such as the fair altogether due to any cause not attributable to its fault including Paragraph, TBSI may require the Exhibitor to carry out work immediately of payment of the subscription and exhibition fees by the Applicant or Remittance Charge, Yen Exchange Charge, Correspondent Bank Charge, natural disasters and acts of God. to repair or rectify same at the Exhibitor's expense. In such a case, the the Exhibitor (pursuant to Article 2-(2) and Article 4-(2)) and/or any other Lifting Charge, other charges, fees and commissions) and other costs (2) In the event of any change to the dates and the site scale of the fair under Exhibitor shall immediately implement repairs or rectification to the decor in matters under this Agreement, the acts and deeds of such other organizer related to the payment shall be borne by the Applicant. If the full payment the preceding paragraph, TBSI may modify exhibition agreement without question. or the cooperating organization concerned vis-a-vis the Applicant or the is not made, TBSI demand payment for the shortage with handling fee. prior notice. The Exhibitor may not cancel or modify exhibition agreement (4) If the Exhibitor fails to carry out repair work or rectification immediately as Exhibitor shall be deemed those of TBSI vis-a-vis the Applicant or the Handling fee will be charged up to JPY10,000. by reason of such modification. TBSI shall not be liable for any resultant required under the preceding Paragraph, TBSI shall be entitled to repair or Exhibitor, and the acts and deeds of the Applicant or the Exhibitor vis-a- loss or damage which may be incurred by the Exhibitor because of such rectify said booth display, and take all other measures deemed appropriate vis the other organizer or the cooperating organization concerned shall be ■ Article 6 - Exhibition Agreement and Usufructuary modification. by TBSI at the Exhibitor's expense. TBSI shall not be liable for any resultant deemed those of the Applicant or the Exhibitor vis-a-vis TBSI. Right to Exhibition Space (3) In the event of the cancellation of the fair under Paragraph ( 1), TBSI may loss or damage which may be incurred by the Exhibitor. ■ Article 23 - Visa Guarantor / Letter of Invitation The exhibition agreement shall take effect from the date when TBSI cancel this exhibition agreement without prior notice, and shall not be liable The Exhibitors cannot request TBSI to issue documents necessary for for any resultant loss or damage which may be incurred by the Exhibitor ■ Article 16 - On-the-Spot Inspections confirms the full payment of the booth rental fees by the Applicant. After exhibitor visas such as an invitation guarantee letters. because of such cancellation. (1) When it is necessary for the security, fire or crime prevention, or other the effective date, the Applicant shall have the right to use the Exhibition matters relating to the venue administration and operation, TBSI or its ■ Article 24 - Deliberation Space as an exhibitor. In cases that TBSI exceptionally approves the ■ Article 11 - Organizer's Care and Exemption from Liability representative may enter the Exhibition Space, inspect the Exhibition written requests of the cancellation from the Applicant after receipt of the Matters not stipulated in this "The Provision of Exhibition Agreement" shall (1) TBSI shall exercise its due care for the management, maintenance, Space and take any measures deemed appropriate by TBSI after giving be handled in accordance with the provisions of the "Exhibitors Manual" full payment of the booth rental fees or the full payment by the Applicant is protection and preservation of the entire exhibition hall and the exhibits prior notice to the Exhibitor; provided that in the case of an emergency and other regulations established separately by TBSI. If other matters not confirmed by TBSI by the due date, the exhibition agreement shall be contained therein during the fair period as well as the delivery/removal where TBSI cannot give prior notice to the Exhibitor, TBSI may carry out not provided for herein or therein or ambiguities are found, same shall be deemed cancelled and the Applicant loses the right to use the Exhibition periods, and thereby endeavor to achieve smooth operation of the fair. In such inspection and report same to the Exhibitor immediately afterward. resolved in accordance with the decision of TBSI. Space. In this case, TBSI shall not be required to refund any amount of so doing, TBSI may request the Exhibitor to suspend or restrict delivery, (2) In the situation stipulated in the preceding Paragraph, the Exhibitor shall fees already received, regardless of the reason. removal or exhibition of exhibits and demonstrations, and to take any other cooperate for the measures taken by TBSI. necessary measures. In such cases, the Exhibitor shall immediately take the necessary measures.
11 12 Classified List of Exhibits Exhibitors List (JIMTOF 2018)
F 1.METAL MACHINE TOOL 72 Coining press 150 Drill chucks 224 Others Domestics Japan Laser Corporation MITAKA KOHKI CO., LTD. Panduit Corp. TAKAMATSU MACHINERY CO.,LTD. F.P.TOOLS CO.,LTD Japan Speed Shore Co,LTD Mitsubishi Corporation Technos Pascal Corporation TAKAMAZ EMAG Co., Ltd.* (1) Turinig Machine (Lathe) 73 Platen press 151 Tool holders for lathe 7. PRECISION MEASURING, OPTICAL A FA Service* JAPAN WOLFRAM CO.,LTD. MITSUBISHI ELECTRIC CORPORATION PATLITE Corporation Takashima Sangyo Co.,Ltd. 1 Engine lathe(incl. NC) 74 Extrusion press 152 Other tool holders MEASURING & TESTING MACHINE & FACT co.,ltd. JATCO Tool MITSUBISHI HEAVY INDUSTRIES MACHINE PHOTRON LIMITED TAKAYAMA TRADING COMPANY LIMITED A.L.M.T.Corp． 2 Roll lathe(incl. NC) 75 Forging press (3) Accessories & Attachments INSTRUMENT FANUC CORPORATION JBM Corporation TOOL CO., LTD. Pioneer Machine Tools, inc. TAKEDA MACHINE TOOLS CO., LTD. ABICO R&D CO.,LTD. FARO Japan, Inc. JEOL Ltd. Mitsubishi Hitachi Tool Engineering, Ltd. Pioneer Trading Company* TAKEDASUNTEC CO., LTD.* 3 Automatic lathe(incl. NC) 76 Cold hobbing press 153 Dividing heads Vemier caliper (including height gauge, ADACHISOGYO CO.,LTD* FAT System Co., Ltd.* JMACS Japan Co.,Ltd. Mitsubishi Hitachi Tool Engineering, Ltd.** Polytec Japan TAKEUCHI PRECISION WORKS CO.,LTD. 225 Adcole Far East Ltd. 4 Bench lathe(incl. NC) 77 Briquetting press 154 Rotary tables depth gauge) FINETEC CO.,LTD. JOHOKU CHEMICAL CO.，LTD MITSUBISHI MATERIALS CORPORATION PRECISION TOOL MAKERS EXPORT Takisawa Machine Tool Co., Ltd. AeroEdge Co., Ltd. FIRST GIKEN CO.,LTD. Johoku Chemical Trading Co,.Ltd** MITSUBOSHI KOGYO CO., LTD. GROUP, LTD. takura kougu seisakusyo 5 NC lathe(horizontal spindle) 78 Press brake 155 Machine vises 226 Micrometer AFC Japan Corporation FIRST MACHINING.Corp* JTEKT CORPORATION MITSUHATA MACHINERY CO.,LTD PRIORITY CO.,LTD TANITEC CORPORATION Ai Solutions Co.,Ltd. FIRSTEC CORPORATION JXTG NipponOil&Energy Corporation MITSUI & CO. MACHINE TECH LTD.* PULSTEC INDUSTRIAL CO.,LTD. TANOI MFG.CO.,LTD. 6 NC lathe(vertical spindle) 79 Hydro-forming press 156 Various units (Feeding, Drilling etc.) 227 Dial gauge AICHI SANGYO Co.,LTD Flow Japan Corporation K MITSUI GRINDING WHEEL CO.,LTD. R TATENO CO., LTD. 7 Turning center 80 Other Hydraulic Press 157 Jigs & xtures 228 Block gauge AKAMATSU ELECTRIC MFG.CO.,LTD FNS Co.,Ltd. Mitsui High-tec, Inc. TATSUNO SEWING DOCTOR COMPANY AKATSUKI MFG. CO., LTD. 8 Other lathes(incl. NC) (2) Mechanical Press 158 Other accessories & attachments 229 Gauge FREEBEAR CORPORATION K.K.3A-SANGYO MITSUI KOKUIN READ Co.,Ltd Tech・YASUDA Co.,LTD Alfa Mirage Co.,Ltd FSK IINC. K.MECS CO.,LTD. MITSUI SEIKI KOGYO CO.,LTD. REIHOU.CO.LTD Techno Dynamics Inc. (2) Drilling Machine 81 Power press (4) Machine Components 230 Air micrometer ALPHA LASER JAPAN CO.,LTD. FUCHS JAPAN LTD. K.T.System Co., Ltd.* Mitutoyo Corporation Reishauer KK Techno Nakanishi Co. Ltd. 9 Upright drilling machine 82 Crank press 159 Clutches & brakes 231 Electric micrometer ALPS TOOL CO., LTD. FUJI BC ENGINEERING CO.,LTD KABUTO.MFG.CO.,LTD Miyakawa industry.co.ltd Renishaw KK TECHNOA Inc. AMADA HOLDINGS CO., LTD. FUJI CORPORATION KAGAKU KEIKI KENKYUSHO CO.,LTD. MIZUHO Co.,Ltd. RESITON Co., Ltd. TechnoCoat Co., Ltd. 10 Radial drilling machine 83 Crank-less press 160 Ball screws 232 Length measuring machine AMETEK Co., Ltd FUJI DIE CO., LTD. Kamakura Seisakusho Co., Ltd. MONODUKURI REVIEW CO.,LTD. RESMOTOOL CO.,LTD. Technology Research Association of Future 11 Bench drilling machine 84 Knuckle joint press 161 Linear motion guides 233 Three dimensional co-ordinate measuring ANDOKIHAN CO.,LTD. Fuji Electronics Industry co.,ltd.* Kamogawa Co.,Ltd* Mori Haguruma.KK* RF Co., Ltd. Additive Manufacturing Any Design Co., Ltd.* 12 Deep hole drilling machine 85 Link-motion press 162 Bearing 234 Angle measuring machine & instrument FUJI GRINDING WHEEL MFG.CO.,LTD. Kan Ｍechanical Industry.Inc Mori Kougyou.KK* R-GOT CO.,LTD TECLOCK Corporation APM Corp.** Fuji Honing Industrial Co.,Ltd. KANAGATA SHINBUN Co., LTD. MOSTEC JAPAN Co.,Ltd* Rhinos Company Ltd. TEIKEN 13 NC drilling machine 86 Drawing press 163 Spindles 235 Screw thread machine AQUA CHEMICAL CO.,LTD. FUJI INDUSTRIES CO ., LTD KANEFUSA CORPORATION Motoyuki Co.,Ltd RIKEN SEIKI Co.,Ltd. TEIKOKU CHUCK Co.,Ltd. AREUSE Co.,Ltd 14 Other drilling machines(incl. NC) 87 Dieing machine 164 Shaft coupling 236 Gear measuring machine Fuji Manufacturing Co.,Ltd. Kanematsu KGK Corp. MOVAC LTD Rittal K.K. Tenryu Saw Mfg. Co., Ltd. ASA Electronics Industry Co.,LTD Fuji Seimitsu Co.,Ltd. KANETEC CO.,LTD. MST Corporation RIX CORPORATION TERAL INC. (3) Boring Machine 88 Punching press 165 Other components Surface roughness measuring machine & Asahi Diamond Industrial Co., Ltd. FUJI TOOL CO., LTD. KANEX HAMONO KOGYO CO., LTD MURAKI LTD. RMF Japan Co., Ltd. Tetsugen Jitsugyo Co., Ltd.* 237 Asanuma Giken Co., Ltd. 15 Horizontal boring machine(incl. NC) 89 Press brake (5) Auxiliary equipment instrument FUJIGEN KOUGYOU CO.,LTD. KANTO BUSSAN CO.,LTD MURATA MACHINERY,LTD. ROBOTEC Inc.* THE KIICHI TOOLS CO., LTD. ASK CORPORATION FUJIKIKO CO.,LTD KANTO SEIKI MY TOOL NAGANO CO., LTD. Roemheld Halder Co.,Ltd. THE NIKKAN KOGYO SHIMBUN, LTD. 16 Horizontal boring and milling machine(incl. NC) 90 Transfer press 166 Automatic tool changer Roundness, Straightness & Form measuring ASTEC CO.,LTD Fujikura Ltd. KANZAKI KOKYUKOKI MFG.CO.,LTD. Roku-Roku Sangyo, Ltd Thermal Co.,Ltd. 238 ATAGO CO.,LTD. N 17 Jig boring machine(incl. NC) 91 Multi-slide forming press 167 Tool presettets machine & instrument FUJIMOTO YUKA CO.,LTD. KARATS PRECISION, INC. ROKU-ROKU SANGYO, LTD.* THK CO.,LTD. Atsuchi Tekko CO.,LTD. FUJISANGYO.CO.,LTD. KARCHER JAPAN Co.,Ltd. NABELL CORPORATION ROSS ASIA K.K. Tipton Corp. 18 Fine boring machine(incl. NC) 92 Metal powder moulding machine 168 Chip disposal equipments Automatic precision measuring machine & AUTHENTEC CO.,LTD FUJISEIKO LIMITED KARL STORZ ENDOSCOPY JAPAN K.K. Nabeya.Co.,Ltd. RYOCO SEIKI CO.LTD TODASEIKI 239 Autodesk Ltd. Japan 19 Other boring machines(incl. NC) 93 Notching press Lubrication equipments & temperature instrument FUJITA SHOJI CO.,LTD. KASHIFUJI WORKS,LTD. NACHI-FUJIKOSHI CORP. Ryokosha Co., Ltd. TOHSHIN TECHNICAL CO.,LTD. 169 awa spindle co.,ltd. controllers Fujitsu Isotec Limited* KATO MFG.CO.,LTD. NAGAHAMA SEISAKUSHO LTD. S TOKO CO., LTD. (4) Milling Machine 94 High speed production press 240 Digital position readout system Ayabo Corporation Fukuda Corporation KAWAI ENGINEERING Co.,LTD NAGASE INTEGREX Co.,Ltd. TOKYO AUTOMACH CO.,LTD. 20 Knee type milling machine(incl. NC) 95 Friction screw press 170 Protect covers 241 Universal measuring microscope FUKUSHIMA FILE CO., LTD.* Kawasaki Heavy Industries, Ltd.* NAGASHIMA SEIKO CO.,LTD S&F Inc. TOKYO BOEKI TECHNO-SYSTEM, LTD. B 21 Bed type milling machine(incl. NC) 96 Other Mechanical Press 171 Cutting oil, coolant & lubricating oil lters 242 Tool maker's microscope FUNASAW CO.,LTD KAWASAKI TECHNOLOGY CO.,LTD. NAGEL・AOBA PRECISION CO., LTD. SAEILO ASIANET,INC. TOKYO BRAZE Co.,Ltd. B.C TECH CO.,LTD FURUKAWASEIKI KAWATA CHUCK MFG.CO.,LTD NAKA SEIKI CO.,LTD SAEILO JAPAN, INC. Tokyo Chokoku Marking Products Co.,Ltd 22 Universal milling machine(incl. NC) (3) Bending Machine 172 Variable speed changers 243 Metallurgical microscope B2B Support of Osaka Prefecture FUTAMURA MACHINES&TOOLS KAWATATEC CORP. NAKAHARA CHEMICAL PRODUSTRY CO.LTD SAIDA・UMS CO.,LTD. TOKYO ENGINEERING CO.,LTD 23 Double-headed milling machine(incl. NC) 97 Plate & sheet bending roll 173 Pallet changers & pallet magazines 244 Projecter Balluff Co., Ltd G KEBA Japan Co., Ltd. NAKAMURA MFG. CO., LTD. Saint Gobain K.K. Tokyo Metropolitan Small and Medium Bando Chemical Industries,Ltd. KEIJI KOUSAN Co., Ltd. Nakamura-Tome Precision Industry Co.,LTD. Saito Seisakusho Co., Ltd. Enterprise Support Center 24 Other milling machines(incl. NC) 98 Plate & sheet roll leveler 174 Other equipments 245 Tachometer Baykal Japan GANRO INDUSTRIAL CORP.(JAPAN) Kennametal Japan Ltd. NAKANIHON-RO KOGYO CO.,LTD. SAKURAI LTD. Tokyo Oilanalyst Co.,Ltd.* (5) Planning, Shaping, Slotting & 99 Seaming roll 4. HYDRAULIC & PNEUMATIC EQUIPMENTS 246 Other measuring instruments Beckhoff Automation K.K. GCT Co. Ltd.* KENSAKUKENMA Co.,Ltd. NAKANISHI INC. SAN-AI ECOSYSTEM CO.,LTD TOKYO SEIKI KOSAKUSHO CO.,LTD. Genetec Corporation KEYENCE CORPORATION Nango Co.,Ltd. Sanalloy Industry Co.,Ltd. TOKYO SEIMITSU CO., LTD. Broaching Machine Beckhoff Automation K.K.* 100 Combination roll 175 Oil hydraulic machine equipment 247 Material testing machine BICTOOL Co., LTD. GENIO Solutions Co.,Ltd. KF Carbide JapanCo., Ltd. NBK SANDVIK K.K. TOKYO SEIMITSU HATSUJO CO.,LTD. 25 Machining center