DOCSLIB.ORG

Product Data Sheet

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Product Data Sheet PRODUCT DATA SHEET SanDry ™ CLAY DESICCANT S-BAG Complete Protection Made Simple SanDry ™ Clay Desiccant is significantly developed that pr ovides high water adsorption capacity. The adsorption capacity will reach up to 40% of its own weight. This exhibits to a proportional decrease in the quantity weight and sm aller bags size with cost effective solution . Clay Desiccant is Environment-Friendly as natural o ccurring mineral. Bagged desiccant are intended for use in removing m oisture from air in the package and closed spaces to prevent corrosion, mold, mildew and oxidat ion. PACKING SPECIFICATION Bag Weight Packing per Box Packing per Tin Product Code Dim ension (gram) 320x320x305(mm) 230x230x350(mm) L x W (mm) XX-0001ZB 1 50 x 30 6,000 5,000 L XX-0002ZB 2 60 x 30 5,000 3,000 XX-0003ZB 3 70 x 30 3,000 2,500 XX-0005ZB 5 60 x 45 2,000 1,500 XX-0010ZB 10 65 x 60 1,200 800 XX-0020ZB 20 90 x 60 600 500 W PRODUCT SPECIFICATION PRODU C T Brand Name SanDry™ Clay Desiccant Trade Name Clay Desiccant Bag Bag Type 3-side seal DESICC AN T Trade Name Clay Desiccant Chemical Name Montmorillonite Clay Appearance Beaded Mesh Size 2-4mm Color Red Brown Granules Adsorption Capacity at 25 ℃ 20% RH 12-13% wt. 40% RH 19-21% wt. 90% RH 45-55% wt. SUBSTRATE Material Net Paper OneWay Melfit Waxy Tyvek® Code (XX) NP OW MF WX TV ST AN D AR D Manufactured in accordance with MIL-3464E Type I & II, BS 7529 APPLICATION Small hermetic seal package (approximate <1ft 3 ) INDUS TRY Machine parts, Semiconductor electronics, Optical devices, Tools, Weapons, Cameras, Medical equipments, Military inst ruments and Armaments, Pharmaceuticals, Food stuffs, Museum stora ge etc. REQUIREMENT CHART (Generic Reference) Clay Desiccant in gram 1 2 3 5 10 20 3DContainer (cm) 9x9x9 11x11x11 13x13x13 16x16x16 20 x20 x2 0 25x25x25 Volume in cubic ft. 0.028 0.055 0.082 0.14 0.28 0.55 SanDry ™ Desiccant Products Data Sheet page 1 PRODUCT DATA SHEET SanDry ™ CLAY DESICCANT M-BAG Complete Protection Made Simple SanDry ™ Clay Desiccant is significantly developed that pr ovides high water adsorption capacity. The adsorption capacity will reach up to 40% of its own weight. This exhibits to a lower quantity weight and smaller bags size with cost effective solution . Clay Desiccant is Environment-Friendly as natural occurring mineral. Bagged desiccant are intended for use in removing m oisture from air in the package and closed spaces to prevent corrosion, mold, mildew and oxidat ion. PACKING SPECIFICATION Product Weight Bag Packing per Box Packing per Tin Cod e (gram) Dimension 320x320x305mm 230x230x350mm L x W(mm) XX-0030ZB 30 100 x 80 500 400 L XX-0050ZB 50 110 x 80 300 200 XX-0100ZB 100 130 x 110 150 100 XX-0130ZB 130 150 x 110 100 60 W PRODUCT SPECIFICATION PRODU C T Brand Name SanDry™ Clay Desiccant Trade Name Clay Desiccant Bag Bag Type Pillow Pack DESICC AN T Trade Name Clay Desiccant Chemical Name Montmorillonite Clay Appearance Beaded Mesh Size 2-4mm Color Red Brown Granules Adsorption Capacity at 25 ℃ 20% RH 12-13% wt. 40% RH 19-21% wt. 90% RH 45-55% wt. SUBS TR ATE Material NonWoven Net Paper OneWay Melfit Tyvek® Code (XX) NW NP OW MF TV ST AN D AR D Manufactured in accordance with MIL-3464E Type I & II, BS 7529 APPLICATION Medium to large hermetic seal package INDUS TRY Machine parts, Semiconductor electronics, Optical devices, Tools, Weapons, Cameras, Medical equipments, Military inst ruments and Armaments, Pharmaceuticals, Food stuffs, Museum stora ge etc. REQUIREMENT CHART (Generic Reference) Clay Desiccant in gram 30 50 100 130 3D Container (cm) 28x28x28 33x33x33 42x42x42 47x47x47 Volume in cubic ft. 0.83 1.30 2.70 3.60 SanDry ™ Desiccant Products Data Sheet page 2 PRODUCT DATA SHEET SanDry ™ SILICA GEL S-BAG Complete Protection Made Simple Silica gel is used throughout industry to adsorb moisture and maintain low relative humidity thereby preventing product contamination and degradation. Silica gel is capable of adsorbing up to 30% of its own weight of water vapor. Indicating silica gel was impregnated with cobalt L chloride that gives the silica gel its activity saturation indicator changing from a blue color to pink when a 10-12% moisture loading (by weight) of the desiccant is exceeded. W PACKING SPECIFICATION Product Code Weight Bag Packing per Box Packing per Tin (gr am ) Dimension 320x320x320mm 230x230x350mm Silica Gel Silica Gel Silica Gel L x W (mm) W hite Mi xe d Blue XX-0001SGW XX-0001SGM XX-0001SGB 1 50 x 30 6,000 5,000 XX-0002SGW XX-0002SGM XX-0002SGB 2 60 x 30 5,000 3,000 XX-0003SGW XX-0003SGM XX-0003SGB 3 70 x 30 3,000 2,500 XX-0005SGW XX-0005SGM XX-0005SGB 5 60 x 45 2,000 1,500 XX-0010SGW XX-0010SGM XX-0010SGB 10 65 x 60 1,200 800 XX-0020SGW XX-0020SGM XX-0020SGB 20 90 x 60 600 500 PRODUCT SPECIFICATION PRODU C T Brand Name SanDry™ Silica Gel Trade Name Silica Gel Bag DESICC AN T Trade Name Silica Gel Chemical Name Synthetic Silica Gel Appearance Beaded Mesh Size 2-4mm Color Transparent White Adsorption Capacity at 25 ℃ 20% RH 8-15% wt. 40% RH 20-30% wt. 90% RH 30-35% wt. SUBS TR ATE Material OPP+PE Net Paper OneWay Melfit Waxy Tyvek® Code (XX) OP NP OW MF WX TV ST AN D AR D Manufactured in accordance with MIL-3464E Type I & II, BS 2540 APPLICATION Small hermetic seal package (approximate <1ft 3 ) INDUS TRY Machine parts, Semiconductor electronics, Optical devices, Tools, Weapons, Cameras, Medical equipments, Military inst ruments and Armaments, Pharmaceuticals, Food stuffs, Museum stora ge etc. REQUIREMENT CHART (Generic Reference) Silica Gel in gram 1 2 3 5 10 20 3DContainer (cm) 9x9x9 11x11x11 13x13x13 16x16x16 20 x20 x2 0 25x25x25 Volume in cubic ft. 0.028 0.055 0.082 0.14 0.28 0.55 SanDry ™ Desiccant Products Data Sheet page 3 PRODUCT DATA SHEET ™ SILICA GEL M-BAG Complete Protection Made Simple SanDry Silica gel is used throughout industry to adsorb moisture and maintain low relative humidity thereby preventing product contamination and degradation. Silica gel is capable of adsorbing up to 30% of its own weight of water vapor. L Indicating silica gel was impregnated with cobalt chloride that gives the silica gel its activity saturation indicator changing from a blue color to pink when a 10-12% moisture loading (by weight) of the desiccant is exceeded. W PACKING SPECIFICATION Product Code Weight Bag Packing per Box Packing per Tin (gram) Dimension 320x320x305mm 230x230x350mm Silica Gel Silica Gel Silica L x W(mm) W hite Mi xe d Gel Blue XX- XX- XX- 30 100 x 80 500 400 003 0SGW 003 0SG M 0030SGB XX- XX- XX- 50 110 x 80 300 200 005 0SGW 005 0SG M 0050SGB XX- XX- XX- 100 130 x 110 150 100 010 0SGW 010 0SG M 0100SGB XX- XX- XX- 130 150 x 110 100 60 013 0SGW 013 0SG M 0130SGB PRODUCT SPECIFICATION PRODU C T Brand Name SanDry™ Silica Gel Trade Name Silica Gel Bag DESICC AN T Trade Name Silica Gel Chemical Name Synthetic Silica Gel Appearance Beaded Mesh Size 2-4mm Color Transparent White Adsorption Capacity at 25 ℃ 20% RH 8-15% wt. 40% RH 20-30% wt. 90% RH 30-35% wt. SUBS TR ATE Material NonWoven Net Paper OneWay Melfit Tyvek® Code (XX) NW NP OW MF TV ST AN D AR D Manufactured in accordance with MIL-3464E Type I & II, BS 7529 APPLICATION Medium to large hermetic seal package INDUS TRY Machine parts, Semiconductor electronics, Optical devices, Tools, Weapons, Cameras, Medical equipments, Military inst ruments and Armaments, Pharmaceuticals, Food stuffs, Museum stora ge etc. REQUIREMENT CHART (Generic Reference) Silica Gel in gram 30 50 100 130 3D Container (cm) 28x28x28 33x33x33 42x42x42 47x47x47 Volume in cubic ft. 0.83 1.30 2.70 3.60 SanDry ™ Desiccant Products Data Sheet page 4 PRODUCT DATA SHEET SanDry ™ CARGO DRY Complete Protection Made Simple Cargo Dry is a product specially developed for prevention of condensation in containers. Condensation occurs as temperature fluctuates in the container while en route to destination. Cargo Dry protects goods in sea, air, rail or truck transport from moisture and condensation dam age. 70mm 40mm P P Corrugated B o x 800mm m HIC 700mm 360mm m 230mm m 120mm 130mm 130mm 170mm m m m Cargo Dry Pole Cargo Dry 1500 Cargo Dry 500 Cargo Dry 2000 PACKING SPECIFICATION Product Product Name Weight Substrate Composition Packing per Box Cod e (gram) XX- 050 0ZB Cargo Dry 500 500 90g/sqmNonwoven 30 [320x320x305 (m m ) bo x] XX-1500ZB Cargo Dry 1500 1500 90g/sqmNonwoven + 15 [810x270x220(mm) box] Outer PE Bag XX-1500ZB Cargo Dry Pole 1500 90g/sqmNonwoven + 20 [305x305x703(mm) box] PP Corrugated Box CD-2000ZB Cargo Dry 2000 2000 90g/sqmNonwoven 8 [320x320x305(mm) box] PRODUCT SPECIFICATION PRODU C T Brand Name SanDry™ Cargo Dry Trade Name Cargo Dry DESICC AN T Trade Name Clay Desiccant Chemical Name Montmorillonite Clay Appearance Beaded Mesh Size 2-4mm Color Red Brown Granules Adsorption Capacity at 25 ℃ 20% RH 12-13% wt. 40% RH 19-21% wt. 90% RH 45-55% wt. ST AN D AR D Manufactured in accordance with MIL-3464E Type I & II, BS 7529 APPLICATION Container, enclosed area, storage and warehouse REQUIREMENT CHART (Generic Reference) Cargo Dry in gram 500 1500 2000 20’ Container 12-20 8-12 6-8 40’ Container 20-30 12-20 8-12 SanDry ™ Desiccant Products Data Sheet page 5 PRODUCT DATA SHEET SanDry ™ HUMIDITY INDICATOR CARD Complete Protection Made Simple Humidity Indicator Card (HIC) is a simple to use instrument useful to measure Relative Humidity (RH) percentage in every sealed environmen t such as a packaging.
Load more

Recommended publications
  • Handling of Moisture Sensitive Plastic Packages
    查询PMC-951041供应商 捷多邦，专业PCB打样工厂，24小时加急出货 APPLICATION NOTE PMC-951041 ISSUE 3 HANDLING MOISTURE SENSITIVE IC PACKAGES HANDLING OF MOISTURE SENSITIVE PLASTIC PACKAGES APPLICATION NOTE ISSUE 3: SEPTEMBER 1997 PMC-Sierra, Inc. 105 - 8555 Baxter Place Burnaby, BC Canada V5A 4V7 604 .415.6000 APPLICATION NOTE PMC-951041 ISSUE 3 HANDLING MOISTURE SENSITIVE IC PACKAGES PMC-Sierra, Inc. 105 - 8555 Baxter Place Burnaby, BC Canada V5A 4V7 604 .415.6000 APPLICATION NOTE PMC-951041 ISSUE 3 HANDLING MOISTURE SENSITIVE IC PACKAGES CONTENTS 1 OVERVIEW .............................................................................................. 1 2 BACKGROUND........................................................................................ 2 2.1 PACKAGE CONSTRUCTION AND DELAMINATION.................... 2 2.2 MAXIMUM ALLOWABLE CONCENTRATION OF WATER............ 3 2.3 ABSORPTION RATES .................................................................. 3 2.4 DESORPTION RATES.................................................................. 4 3 DRY BAGS AND BOXES ......................................................................... 5 3.1 DRY BAGS .................................................................................... 5 3.2 DRY BOXES.................................................................................. 5 4 QUALIFICATION STANDARDS................................................................ 6 5 THE HUMIDITY BUDGET........................................................................ 8 6 CUSTOMER SITE REQUIREMENTS ...................................................
    [Show full text]
  • On the Cold Storage of Photographic Materials in a Conventional Freezer Using the Critical Moisture Indicator (CMI) Packaging Method
    On the Cold Storage of Photographic Materials in a Conventional Freezer Using the Critical Moisture Indicator (CMI) Packaging Method Mark H. McCormick-Goodhart Preface The paper you are about to read is actually a draft that was never completed for publication. I wrote it in 1994 while I was a research scientist employed by the Smithsonian Institution in Washing- ton DC. I was interested in low cost methods of cold storage that could be used for small collections of photographic films and prints. Many photographers seek a better way to preserve their life’s work, and small historical societies can also benefit from the principles of the CMI packaging method. Even large institutions don’t always have the resources to undertake expensive vault building projects to the extent that they are needed, and a small scale approach is far better than doing nothing. Yet I didn’t publish the paper because I felt it lacked information on the subject of “staging” (i.e., transfering the package to and from the freezer). At the time the primary concern for conservators appeared to be twofold: 1) How long does it take to warm them before opening the package, and 2) Will the photographs be damaged by ther- mal cycling? In more recent years, new cold storage research that I have been conducting with my good friend and colleague, Henry Wilhelm, has uncovered the potential for a third problem. We have seen that large, loosely filled containers, even though they may have an outer vapor barrier, can have internal mois- ture migration problems during the warm-up and cool-down stages.
    [Show full text]
  • LDS Preparedness Manual the Prudent See Danger and Take Refuge, but the Simple Keep Going and Suffer for It
    LDS Preparedness Manual The prudent see danger and take refuge, but the simple keep going and suffer for it. Proverbs 27:12 V5.03, January 1st, 2011 “Member Edition” The degree of our preparation will be equal to the extent of our obedience, which will determine the measure of our peace of mind. “Neil H. Leash” “The greatest events that have been spoken of by all the Holy Prophets will come along so naturally as the consequences of certain causes, that unless our eyes are enlightened by the Spirit of God, and the spirit of revelation rests upon us, we will fail to see that these are the events predicted by the Holy Prophets.” George Q. Cannon While this manual has been prepared for, and is intended to be read primarily by the active members of The Church of Jesus Christ of Latter-day Saints. All contents are fully applicable to other parties who are interested in meaningful preparation. THIS MANUAL MAY BE SOLD AT COST ONLY - AND IS NOT TO BE OFFERED FOR RESALE. 1 Please Note: The contents of this booklet are intended to assist individuals and families in coping with emergency preparations. However, fi nal decisions on preparation for actions taken during an emergency are the sole responsibility of individuals. No one knows your needs or can take care of you better than you can-nor does anyone else have that responsibility. Information and examples contained within this booklet are provided for illustration and advice only. Therefore, no liability is assumed by the Editor or any of the Authors for the use or misuse of any information or products contained in this publication.
    [Show full text]
  • Guide to Meeting the Standards for Moisture Sensitive Components in Electronic Manufacturing Environments
    $19.99 Guide to Meeting the Standards for Moisture Sensitive Components in Electronic Manufacturing Environments MSD - ESD World Headquarters North & South America, Europe 4287-B S.E. International Way Milwaukie, Oregon 97222-8825 U.S.A. Tel: +1 503 659 6100 | +1 800 323 4548 Fax: +1 503 659 4422 Email: [email protected] | [email protected] Website: www.ECD.com Asia ECD Asia/Pacific Singapore Moble: +65 9692 6822 Email: [email protected] [email protected] Website: www.ECD.com ECD Europe/Africa/Middle East Mobile: +48 512 659 100 E-Mail: [email protected] ©2013-2015 ECD. All Rights Reserved. Foreign and US Products of ECD are covered by US Patents and Patents Pending. The trapezoidal ECD logo®, and M.O.L.E.® (Multi-Channel Occurrent Logger Evaluator) are registered trademarks of ECD. 2 800.323.4548 | www.ecd.com TABLE OF CONTENTS Introduction ............................................................................................................................................. 4 The Benefits of Moisture ................................................................................................................... 4 Human comfort ............................................................................................................................. 4 ESD reduction ................................................................................................................................ 4 The Drawbacks of Moisture ............................................................................................................
    [Show full text]
  • Desiccant, Oxygen Absorber, and Humidity Indicator Solutions
    Login Contacts United States Business Units / Functional Minerals / Cargo & Device Protection Cargo & Device Protection DESICCANT, OXYGEN ABSORBER, AND HUMIDITY INDICATOR SOLUTIONS Clariant offers active and intelligent packaging & cargo protection solutions to prevent the harmful effects of moisture and oxidation. Solutions such as Oxy-Guard™ Oxygen Absorbers aid in decreasing food waste by helping extend the shelf life in packaged foods. Our sustainable EcoTain® labeled cargo desiccant, Container Dri® II, safeguards foods, or any other containerized shipments during transport. Desi Pak® bentonite clay desiccant bags, coupled with Humitector® humidity indicators, provide a visually dry environment for export packaging and various packaged goods. With worldwide manufacturing sites in Brazil, Indonesia, Turkey, United States, and China, supported by an experienced global sales team, we will find the right solution. Contact us Tweets by @ClariantCDP Ryan Grauer Contact Person General Information Get in Contact Questions? Call us. JOIN THE CONVERSATION DESI PAK® Desiccant Calculator Products: Desiccants, Oxygen Absorbers, Humidity Indicators PRODUCTS ADSORMAT® Questions? Call us. ADSORMAT® open-system desiccator plugs are mounted on the vent nozzles of drums, KTC/IBCs and tanks. ADSORMAT® dries the column of air above the product in the container, as well as any humid air subsequently flowing in through the vent nozzle as the container is emptied. This prevents chemical reactions which may otherwise occur in a humid atmosphere. Each ADSORMAT® desiccant plug is fitted with a reversible humidity indicator, the colour change showing when its capacity limit has been reached. For more information about our desiccant, oxygen absorber , and humidity indicator solutions, visit our Cargo & Device Protection page.
    [Show full text]
  • Demystifying Silica Gel for Effective Microclimates January 22, 2019 Rachael Perkins Arenstein A.M
    1/22/2019 DEMYSTIFYING SILICA GEL FOR EFFECTIVE MICROCLIMATES JANUARY 22, 2019 RACHAEL PERKINS ARENSTEIN A.M. ART CONSERVATION Did you know that the internal surface area of a teaspoon of silica gel beads is equivalent to that of a football field? This amazing property makes silica gel a relatively low-cost method for protecting collections on display and in storage from inappropriate or fluctuating environments. But not all silica gel is created equal. • Are you curious as to why silica from preservation vendors is more expensive than other desiccants or gel from commercial vendors? • Have you found loose silica beads or cartridges and pondered why it no longer seems to be “working”? • Interested in guidance on how much to use for your application? Whether it comes in sachets, cartridges or loose beads, the manner in which it is installed and cared for will greatly affect its efficacy. This webinar will focus on understanding the different types of gel, why it matters which you use, and how to calculate appropriate amounts for use in a vitrine or storage cabinet. The basics of appropriate preservation environments, creating a safe microclimate and how to monitor the environment within will be touched on. N.B. This version of the presentation contains additional information that was not included in the live webinar on January 22, 2019. C2C Care Webinar, Demystifying Silica Gel for Effective Microclimates, Arenstein 1 1/22/2019 Access the presentation at: https://www.connectingtocollections.org/effective-microclimates/ C2C Care Webinar, Demystifying Silica Gel for Effective Microclimates, Arenstein 1 1/22/2019 OUTLINE • OVERVIEW OF AGENTS OF DETERIORATION, TYPES OF DAMAGE & THE NEED FOR ENVIRONMENTAL CONTROL • WHAT IS A MICROCLIMATE? • HOW DO WE CONTROL MICROCLIMATES? • WHAT IS SILICA GEL? • USING SILICA GEL EFFECTIVELY • CALCULATING AMOUNTS • PLACEMENT • MONITORING • RECONDITIONING • STORING I’m pleased to be able to talk to you today about silica gel and how we can use it to meet some of the environmental needs of our collections.
    [Show full text]
  • IPC/JEDEC J-STD-033B October 2005 Supersedes IPC/JEDEC J-STD-033A July 2002 JOINT INDUSTRY STANDARD
    IPC/JEDEC J-STD-033B October 2005 Supersedes IPC/JEDEC J-STD-033A July 2002 JOINT INDUSTRY STANDARD Handling, Packing, Shipping and Use of Moisture/Reflow Sensitive Surface Mount Devices Notice JEDEC and IPC Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for his particular need. Existence of such Standards and Publications shall not in any respect preclude any member or nonmember of JEDEC or IPC from manufacturing or selling products not conforming to such Standards and Publications, nor shall the existence of such Standards and Publications preclude their voluntary use by those other than JEDEC and IPC members, whether the standard is to be used either domestically or internationally. Recommended Standards and Publications are adopted by JEDEC and IPC without regard to whether their adoption may involve patents on articles, materials, or processes. By such action, JEDEC and IPC do not assume any liability to any patent owner, nor do they assume any obligation whatever to parties adopting the Recommended Standard or Publication. Users are also wholly responsible for protecting themselves against all claims of liabilities for patent infringement. The material in this joint standard was developed by the JEDEC JC-14.1 Committee on Reliability Test Methods for Packaged Devices and the IPC Plastic Chip Carrier Cracking Task Group (B-10a) For Technical Information Contact: Electronic Industries Alliance/ IPC JEDEC (Joint Electron Device 3000 Lakeside Drive Engineering Council) Suite 309S 2500 Wilson Boulevard Bannockburn, Illinois Arlington, VA 22201 60015-1219 Phone (703) 907-7500 Tel (847) 615-7100 Fax (703) 907-7583 Fax (847) 615-7105 Please use the Standard Improvement Form shown at the end of this document.
    [Show full text]
  • S9086-Kc-Stm-010(Electric Plant
    S9086-KC-STM-010 REVISION 9 NAVAL SHIPS’ TECHNICAL MANUAL CHAPTER 300 ELECTRIC PLANT - GENERAL SUPERSEDURE NOTICE: THIS MANUAL SUPERSEDES S9086-KC-STM-010, REVISION 8 DATED 1 FEB 2012 AND ALL CHANGES THERETO. DISTRIBUTION STATEMENT C: DISTRIBUTION AUTHORIZED TO U.S. GOVERNMENT AGENCIES AND THEIR CONTRACTORS; ADMINISTRATIVE OR OPERATIONAL USE; 11 MARCH 1997. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO NSWC, PHILADELPHIA CODE 944. WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C. SEC 2751, ET SEQ.) OR THE EXPORT ADMINISTRATION ACT OF 1979, AS AMENDED, TITLE 50, U.S.C., APP 2401 ET SEQ. VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN ACCORDANCE WITH PROVISIONS OF DOD DIRECTIVE 5230.25(D). DESTRUCTION NOTICE: DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THIS DOCUMENT. PUBLISHED BY DIRECTION OF COMMANDER, NAVAL SEA SYSTEMS COMMAND *0910LP1123525* TITLE-1 / (TITLE-2 Blank)@@FIpgtype@@TITLE@@!FIpgtype@@1 MAY 2012 @@FIpgtype@@TITLE@@!FIpgtype@@ TITLE-2 @@FIpgtype@@BLANK@@!FIpgtype@@ S9086-KC-STM-010 RECORD OF REVISIONS REV NO. DATE TITLE AND/OR BRIEF DESCRIPTION/PREPARING ACTIVITY ORG N/A ORIGINAL PUBLICATION DATE NOT AVAILABLE 1 N/A REVISION 1 WAS NEVER ISSUED 2 28 FEB 1991 REVISION 2 PUBLICATION UPDATED DISTRIBUTION STATEMENT 3 01 FEB 1996 REVISION 2 PUBLICATION UPDATED DISTRIBUTION STATEMENT 4 11 MAR 1997 REVISION 4 PUBLICATION UPDATED DISTRIBUTION STATEMENT 5 31 DEC 2000 REVISION 5 PUBLICATION 6 31 JUL 2003 REVISION 6 PUBLICATION 7 01 APR 2005 REVISION 7 PUBLICATION 8 1 FEB 2012 NSTM CHAPTER 300 HAS BEEN COMPLETELY REVISED; NO CHANGE BARS WERE USED.
    [Show full text]
  • View Manual File
    DATALOGGERS SENSORS PRE-PACKAGED SYSTEMS WESCOR, INC ENVIRONMENTAL PRODUCTS DIVISION Tabl e of Contents SENSORS, SENSOR ACCESSORIES and PACKAGED SYSTEMS for: Field Notes - Electronic Notebook Systems . 1 SUMMARY OF ALL SENSORS . 3 Barometric Pressure . 4 Growing Degree Monitoring . 5 Leaf Wetness or Moisture Detection . 6 Precipitation (Rain) . .7 - 10 Relative Humidity . 11 - 12 Soil Moisture (also see: Water Potential) . 13 - 15 Solar Radiation . 16 - 18 Temperature . 19 & 23 Water Level . 20 - 22 Water Potential (also see: Soil Moisture) . 25 Water Quality . 23 Water Turbidity . 24 Weather (Meteorological) . 26 - 27 Wind Speed and Direction (Anemometer) . 28 - 29 Wind Speed Indicator (hand held) . 29 DATA LOGGERS and LOGGER ACCESSORIES SUMMARY OF ALL LOGGERS . 30 Biophenometer - Phenological Development Monitor . 5 Datapod CX6 Series - 6 Channel Logger . 31 Datapod DPX Series - 1 & 2 Channel Standard Version Loggers . 32 Datapod DPXc Series - 1 & 2 Channel Compact Version Loggers . 33 Datapod DPXe Series - 1 & 2 Channel Expanded Version Loggers . 34 Datapod EPROM Series - 1 & 2 Channel Loggers . 35 EasyLogger 900 Series - 20 Channel (expandable) Logger . .36 - 38 Logger Terminals: T32 Series and T600 Series . 44 Polycorder 600 Series - Electronic Notebook . .1 Table of Contents continued on the following page. i Tabl e of Contents DATA LOGGERS and LOGGER ACCESSORIES (continued) Polycorder 710 Series - High-Speed, 10 Channel Analog . 39 Polycorder 720 Series - 0-5V, 10 Channel Analog . 40 Power options: batteries, solar panels, wall-mount chargers for in situ applications . 41 - 43 Remote Communications: Modems; Auto Dialers . .45 FIELD ACCESSORIES SUMMARY OF ALL FIELD ACCESSORIES for in situ applications . .46 - 47 Enclosures (Fiberglass and Steel) and enclosure mounting options .
    [Show full text]