MRW620-U1/3-295-886-13(1)

3-295-886-13 (1)

a) Push front panel first hook gently to release it from 1 2 2 1 Overview the hole. 4 3 3 4 6 5 5 6 The MRW620-U1 (hereafter referred to as the “reader/writer”) 8 7 7 8 10 has the following features: 0 Internal s Quick and simple data transfer - easily transfer images from camera to PC Connector USB Header s Compatible with “,” “Memory Stick PRO,” “Memory Multi-/Writer Stick Duo,” CompactFlash, , xD-Picture Card, SmartMedia, MultiMediaCard, SD 6 Reinstall the cover on your computer. s Changeable front panel: Customize your own PC s Quick and easy installation Operating Instructions 7 Plug your computer to the AC power outlet. Before operating the unit, please read this document 8 Start your computer. thoroughly, and retain it for future reference. System Requirements The reader/writer is automatically detected. You do This product and manual are intended for persons who have expert The reader/writer requires the following minimum system not need to install any device drivers. knowledge of personal computers (PCs). Read your PC and configuration: motherboard manuals carefully before connecting the product to your •OS PC. If you have any questions, contact your Sony representative. – Windows® 7 Notes – Windows Vista® • On some computers, a message may appear asking you to – Windows® XP Home or Professional – Windows® 2000 Professional (Service Pack 4 or later) insert the operating system disc. When this happens, follow – Windows® Me First hook is off the computer’s instructions. • Motherboard Interface from the hole. • On some computers, the “HI-SPEED USB Device Plugged into – USB header non-HI-SPEED USB Hub” message may appear, indicating that a hi-speed USB device has been connected to a USB port which does not support hi-speed USB. If your computer has multiple USB headers, try connecting to a different header. MRW620-U1 Package Contents Otherwise, close the message and continue using the reader/ writer with the current header. When you unpack the box, make sure that it contains all the b) Push front panel second hook gently to release it © 2008 Sony Corporation Printed in China accessories listed below. If anything is missing or damaged, contact your retailer. from the hole.

• MRW620-U1 Internal Multi-Card Reader/Writer

Owner’s Record The model and serial numbers are located on the bottom of the reader/writer. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony representative regarding this product. • Front Panel (lvory) Model No. MRW620-U1 • Operating Instructions Second hook is off Serial No. • Mount Screw (M 3 x 5) x 4 from the hole. • Warranty Card WARNING You are cautioned that any changes or modifications not expressly approved c) Pull out the right side of the front panel as in this manual could void your authority to operate this equipment. Parts and Functions illustrated, then remove the panel. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Front To avoid electrical shock, do not open the cabinet. Refer servicing to 1 5 qualified personnel only. 2 Caution 3 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful Then remove interference in a residential installation. This equipment generates, uses, Front Panel and can radiate radio frequency energy and, if not installed and used in 4 (Remove slowly in this accordance with the instructions, may cause harmful interference to 6 direction with light force) radio communications. However, there is no guarantee that interference 1 will not occur in a particular installation. If this equipment does cause Access Indicator 2 Install the new front panel (left side first, as harmful interference to radio or television reception, which can be The indicator blinks when the reader/writer accesses data Specifications on a memory card. illustrated), and then push the right side determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the 2 SmartMedia / xD-Picture Card Slot until you hear a click. USB transfer rate following measures: Insert either a SmartMedia memory card or xD-Picture Card Full-speed (12 Mbps) • Reorient or relocate the receiving antenna. here. Hi-speed (480 Mbps) • Increase the separation between the equipment and receiver. 3 USB Port This hi-speed transfer rate is theoretical value for the USB standard. • Connect the equipment into an outlet on a circuit different from that Insert a USB device here. Actual performance is dependent on the device. to which the receiver is connected. 4 CompactFlash / Microdrive Slot Power requirements • Consult the dealer or an experienced radio/TV technician for help. Insert either a CompactFlash or Microdrive memory card here. 4.75 V to 5.25 V DC Remove all other memory cards before using a Microdrive, You are cautioned that any changes or modifications not because of its large power consumption. Current consumption expressly approved in this manual could void your authority to 1 5 MultiMediaCard / SD Memory Card Slot Max. 500 mA * operate this equipment. Insert either a MultiMediaCard or an SD Memory Card here. Access indicator Note When inserting a miniSD Card, use an adaptor (not Blinks on access supplied). Operating environment If you have any questions about this product, you may call the 6 “Memory Stick” Slot Temperature: 5 °C to 40 °C (41 °F to 104 °F) telephone number listed in “Technical Support.” The telephone number Insert a “Memory Stick” media here. Humidity: 30% to 80% RH below is not for customer service but only for official purposes. When inserting a “Memory Stick Duo” (without MagicGate), “MagicGate Memory Stick Duo,” “Memory Stick Duo” (with Storage environment Declaration of Conformity MagicGate), “Memory Stick PRO Duo,” “Memory Stick PRO- Temperature: -30 °C to + 60 °C (-22 °F to +140 °F) Trade Name: SONY HG Duo,” or “Memory Stick Micro” (“M2”), use an adaptor Humidity: No condensation Model No.: MRW620 (not supplied). Mass Responsible Party: Sony Electronics Inc. Rear Approx. 200 g (7.1 oz.) Address: 16530 Via Esprillo, San Diego, CA 92127 U.S.A. *1 Except when using Microdrive 7 USB Cable: Black Installing the Reader/Writer Telephone No.: 858-942-2230 (for USB devices) This device complies with Part 15 of the FCC Rules. Operation CAUTION is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) • Read your PC and motherboard manuals thoroughly. Dimensions this device must accept any interference received, including • Before installing the reader/writer in your computer, be sure interference that may cause undesired operation. 8 USB Cable: Beige to turn off the power and remove the AC power cord from the (for memory cards) outlet. (Recent computers remain internally live even after (Units : mm) 125.6 Windows is shut down.) NOTICE TO USERS 7 USB Cable (Black) All rights reserved. This manual described herein, in whole or in Connected to the USB header on your motherboard. WARNING part, may not be reproduced or translated to any machine- For the detail, see “Installing the Reader/Writer.” When connecting the reader/writer’s USB cable to your motherboard, readable form without prior written approval from Sony 8 USB Cable (Beige) first read the motherboard manual to learn the position and pin Corporation. Connected to the USB header on your motherboard.

assignment of USB header. Installing the USB cable to this reader/ 101.6 IN NO EVENT SHALL SONY CORPORATION BE LIABLE FOR ANY For the detail, see “Installing the Reader/Writer.” INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES, writer into other terminals such as IEEE1394 header, into a USB WHETHER BASED ON TORT, CONTRACT, OR OTHERWISE, Pin Assignments header with a different pin assignment on the motherboard, or inserting ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL, THE it incorrectly may cause serious damage not only to the reader/writer Signal PIN No. DEVICE DRIVERS OR OTHER INFORMATION CONTAINED but also to the computer and other connected devices, in the worst case HEREIN OR THE USE THEREOF. VCC 2 1 it makes fire or smoke. Sony Corporation reserves the right to make any modification to this –DATA 4 3 manual or the information contained herein at any time without notice. +DATA 6 5 Fornt panel SONY CORPORATION IS NOT RESPONSIBLE FOR ANY DAMAGE Ground To Install the Reader/Writer USB Cable: Black 87 (for USB devices) TO OR LOSS OF ANY PROGRAMS, DATA, OR OTHER Shield INFORMATION STORED ON ANY MEDIA. 1 Unplug your computer from the AC power (Non Connection) 10 Copyright law prohibits unauthorized use of any recorded audio/video outlet. 25.4 for any other purpose than personal enjoyment. Please be warned that 2 1 4 3 2 Follow your computer and motherboard the “Memory Stick” containing images and data protected by copyright 6 5 5 8 7 22.5 60 3-M3 shall be strictly used within copyright law. 10 manual to prepare a drive bay for this 90 Trademarks Connector reader/writer. USB Cable: Beige • , “Memory Stick,” “Memory Stick Duo,” “MagicGate 3 Insert the reader/writer into the drive bay of (for memory cards) Memory Stick,” “Memory Stick PRO,” “Memory Stick PRO Replacing the Front Panel your computer. Duo,” “Memory Stick PRO-HG Duo,” “Memory Stick Micro,” and “M2” are registered trademarks or trademarks of Sony. Front panel in alternate colors (ivory) is included for use with 4 Secure the reader/writer with four screws. • Microsoft®, Windows®, and the Windows logo are trademarks different computer case color. If you want, replace the standard or registered trademarks of Microsoft Corporation in the black front panel with one of the replacements, as follows. 5 Connect the USB cable to the USB header United States of America and/or other countries. • Other system names, product names, and company names 1 Hold the reader/writer face front and gently on the motherboard. appearing in this manual are trademarks or registered remove the panel. Make sure it is connected in the correct directions. 94 trademarks of their respective holders, even though not How to release Front Panel hook from the indicated by the ® or ™ marks. hooking hole About this Document Insert sharp object such as tweezer into the (4 portions) gap and push gently on the hook to release 32.5 70 No tapping This document is intended for customers who specialize in the the front panel assembly of build-to-order and other PCs. End users should observe the USB Cable following items when using this product and manual. CAUTION • Read your PC and motherboard manuals thoroughly. Apply too much force may break front panel hook. Connector • When connecting this Reader/Writer’s USB cable to your motherboard, first read the motherboard manual to learn the position and pin assignment of the USB header. Inserting the USB cable of this Reader/Writer into other terminals, into a USB header with a different pin assignment on the motherboard, or inserting it incorrectly may cause serious damage not only to the Reader/Writer but also to the PC and other connected devices.

3295886131.p65 1 4/3/10, 2:16 PM

MRW620-U1/3-295-886-13(1) MRW620-U1/3-295-886-13(1)

Supported Media Usage Notes Using the Reader/Writer

The reader/writer supports the following media: “Memory Stick” Media CAUTION “Memory Stick” media Notes on using “Memory Stick” media Do not touch and remove a memory card from the reader/ • “Memory Stick” (without MagicGate) *1 writer while the access indicator is blinking. The data stored on • “MagicGate Memory Stick” *1*2 Terminal the memory card may be damaged. • “Memory Stick” (with MagicGate) *1*2*3 • “Memory Stick Duo” (without MagicGate) *1*5 Inserting a Memory Card Notes • “MagicGate Memory Stick Duo” *1*2*5 Insert a memory card into the corresponding slot on the reader/ • “Memory Stick Duo” (with MagicGate) *1*2*3*5 Write-Protected • Use the removable disk icon for the memory card you are writer. • “Memory Stick PRO” *2*3 switch using. When inserting a card, push it in as far as it can go. • “Memory Stick PRO Duo” *2*3*5 • It may take a while for the removable disk icons to appear. *2*3*5 • “Memory Stick PRO-HG Duo” Label area Insert one of the following Insert one of the following • If the removable disk icons do not appear, uninstall the • “Memory Stick Micro” (“M2”) *2*3*4*5 cards in this slot: reader/writer from your computer, and then install again. • Do not remove “Memory Stick” while data is being read or cards in this slot: *1 • MultiMediaCard • Depending on your operating system and the type of memory “MagicGate” is the general name of a copyright protection technology written. • SmartMedia • RS-MMC card you are using, the reader/writer drives may be developed by Sony. • Data may be damaged if: *2 Recording or playback of MagicGate data that uses MagicGate • SD/SDHC Memory Card recognized as “Local Disks” instead of “Removable Disks,” – You remove “Memory Stick” or disconnect the USB cable • miniSD Card* technology is not supported. but this will not affect their operation. *3 4-bit parallel data transfer is supported. It, however, varies depending while data is being read or written. on each medium how long it takes to read/write data. – You use “Memory Stick” in a place where it is susceptible *4 “M2” is an abbreviation of “Memory Stick Micro.” in this document, to static electricity or electric noise. Removing a Memory Card hereinafter, the abbreviation “M2,” is used. • You can keep backup copies of important data on a “Memory *5 With adaptor (not supplied) only. Stick.” • xD-Picture Card* Note SD memory cards • Avoid touching the metal terminals on the “Memory Stick” to prevent damage from static discharge. Be sure to follow the steps described below. • SD/SDHC Memory Card *6 • Do not subject the “Memory Stick” to excessive stress or Do not remove a memory card without following this • miniSD™ card *6*7 shock. procedure, as it may cause damage to the data stored on the *6 Recording or playback of data that uses SD technology is not • Do not disassemble or modify “Memory Stick.” memory card. supported. * Use an appropriate adaptor *7 • Keep “Memory Stick” and other media away from water, With adaptor (not supplied) only. (not supplied). 1 Make sure the access indicator is not blinking. excessive heat and humidity, and from corrosive elements. * Push at the right side. Other memory cards • Do not use or keep “Memory Stick” under an unfavorable 2 Open [My Computer]. • MultiMediaCard *8 condition as below: 3 Right-click the removable disk icon, and select • RS-MMC *8 – Extremely hot place (such as in a parked car with windows • CompactFlash® closed in summer, a spot under direct sunlight, or near an [Eject]. • Microdrive® *9 electrical appliance that radiates heat). 4 Pull the memory card straight out. • SmartMedia™ – Humid place. • xD-Picture Card™ – Place near corrosive substances. • If you set Write-Protected switch “LOCK,” data cannot be *8 MMCplus and MMCmobile are supported, but parallel data transfer is recorded, edited, or erased. not supported. Insert one of the following Troubleshooting *9 The Microdrive requires more power than other memory cards. When • Do not stick anything other than the supplied labels on the cards in this slot: using a Microdrive, remove other memory cards; otherwise an error label area of “Memory Stick.” • CompactFlash Before consulting your Sony representative, verify the following. may occur due to a shortage of power. • Stick a label precisely within the label area. Make sure that the • Microdrive If the problem still persists, consult your local Sony dealer. label does not go beyond the area. Notes • Carry and keep “Memory Stick” in the supplied case. Problem Solution • Not all memory cards are guaranteed to work. Operation is Notes on using “Memory Stick Duo/Memory The computer does not , Your computer and the reader/ not assured if non-supported memory cards are used. Stick PRO Duo” detect the reader/writer. writer may not be properly • The capacity of a file to be recorded/played back is smaller connected. Disconnect the reader/ than 4 GB per file according to the specifications of the file Terminal writer from the computer and system incorporated in “Memory Stick.” reconnect it. • Although operation check of this product has been performed Insert one of the following “Memory Stick” media in this slot: , Your computer and the reader/ with up to 8 GB “Memory Stick,” please note that the The removable disk icon • “Memory Stick” • “MagicGate Memory Stick Duo”* does not appear. writer may not be properly operation is not guaranteed for every type of “Memory Stick.” (without MagicGate) • “Memory Stick Duo” connected. See “Installing the • In this manual, all types of media listed in “Supported Media” Write-Protected switch • “MagicGate Memory Stick” (with MagicGate)* Reader/Writer” and make sure the are generically called memory cards. • “Memory Stick” • “Memory Stick PRO” connection is correct. • I/O cards that are not memory cards, such as GPS cards, are Memo area (with MagicGate) • “Memory Stick PRO Duo”* , A USB device other than the reader/ not supported. • “Memory Stick Duo” • “Memory Stick PRO-HG Duo”* writer is connected to the USB port • and SD Memory Cards use the same slot, so (without MagicGate)* • “Memory Stick Micro” (“M2”)* on the computer. you cannot use them at the same time. • When you use “Memory Stick Duo/Memory Stick PRO Duo” , • The “Memory Stick” media all use the same slot, so you without Write-Protected switch, be careful not to edit or erase * Use an appropriate adaptor (not supplied). The memory card cannot be No memory card is inserted. Insert a cannot use them at the same time. important data by mistake. accessed with Windows memory card into the proper slot. • Only DOS format is supported. Memory cards in other • When you use “Memory Stick Duo/Memory Stick PRO Duo” Explorer or My Computer. formats are not supported. with Write-Protected switch, data cannot be recorded, edited, Notes The computer does not , The memory card is not fully or erased by “LOCK” the switch. recognize the memory card. inserted. Insert the card completely. • Each card slot is designed so a card can only be inserted in the • Use an object with a sharp tip to move the Write-Protected , The memory card is not inserted correct direction. switch. straight. Remove the card and insert • Insert only one memory card into the corresponding slot. Do it again. About Memory Stick • Do not press on the memo area strongly when writing. not insert multiple cards at the same time. , • Carry and keep “Memory Stick” in the supplied case. The computer cannot read / The memory card is not fully What is “Memory Stick”? • When inserting a “Memory Stick Duo” (without MagicGate), write the memory card inserted. Insert the card completely. “MagicGate Memory Stick Duo,” “Memory Stick Duo” (with , The memory card is not inserted “Memory Stick” is a compact-size IC recording medium with a SmartMedia Cards MagicGate), “Memory Stick PRO Duo,” “Memory Stick PRO- straight. Remove the card and insert large capacity. It has been designed not only for exchanging/ Supported SmartMedia cards HG Duo,” “Memory Stick Micro” (“M2”) or miniSD Card, use it again. sharing digital data among “Memory Stick” compliant products, The reader/writer supports 3.3-volt and 3-volt SmartMedia an appropriate adaptor (not supplied). The read/write speed is , The speed may vary depending on but also for serving as an insertable/removable external storage cards, but not the older 5-volt type. • Do not insert a card upside down. slow. the environment or the memory medium that can save data. • Forcibly inserting the card may damage the card or the slot. card being used. This is not a Notch malfunction. Notes on “Memory Stick” • If a memory card is inserted incorrectly, you may not be able to remove it. In the unlikely event that a memory card With Windows 2000 or , Make sure that the “USB Mass On formatting (initialization) becomes stuck in the reader/writer, consult your local Sony Windows Me, the drive icon Storage Device” is not displayed as of the unit does not appear in the “Device Manager.” If it is, • If you format a medium in which data has been already dealer. in the “My Computer” delete it, disconnect the USB cable written, all the data and software will be erased. Please be window. from your computer, and then cautious not to mistakenly erase any important data. 3.3 V and 3 V type 5 V type Reading and Writing Data on a Memory Card reconnect it. • Please make sure to format (initialize) a medium with the formatter of a “Memory Stick” compliant product. If it is The following explanation is illustrated with screens from initialized with Windows Explorer, a FORMAT ERROR Note Windows XP. occurs, and data on the medium can no longer be used by this The screens may differ for other versions of Windows. product. Do not insert a 5-volt SmartMedia card into the reader/writer Technical Support forcibly. 1 Open [My Computer]. About the size of “Memory Stick” SmartMedia card handling Local technical support service is only available in the following sales regions. • When you use “Memory Stick Duo” on the product, please If the gold contact area of a SmartMedia card is dirty, a read s For customers in the USA (Sony Electronics Inc.) make sure to attach the media to a Memory Stick Duo error may occur. Keep the contact area clean. Otherwise do not Adaptor before inserting into the product. touch the gold contact area. Do not twist or warp the card. Monday to Saturday, If you attempt to insert “Memory Stick Duo” into this product Protect the card from static electricity. 8:00 a.m. - 8:00 p.m. CT without attaching it to an adaptor, there is a possibility that • Toll free: 1-800-588-3847 the “Memory Stick Duo” cannot be pulled out of the product. SmartMedia card with ID • Free telephone support is offered for 90 days after your first • Do not insert multiple “Memory Sticks” at the same time. It The reader/writer does not support the ID information on call. might cause damage to the product. SmartMedia cards, but allows any SmartMedia card with an ID USA technical support only: Web- based technical support • When you use “Memory Stick Duo” attached to a Memory to be used as regular media. is free and available 24 hours a day, 7 days a week. Stick Duo Adaptor, please make sure to attach it in the right • Web site: direction. Other Points to Note http://sony.storagesupport.com/ • “Memory Stick Duo” and “Memory Stick Micro” should be Media formatting 2 Make sure the removable disk icons appear in kept away from small children to prevent them from Warranty Card Do not format (initialize) memory cards with a computer. If you [My Computer]. accidentally swallowing it. format a memory card with a computer, devices such as digital •A warranty card should be provided with this product at the • When you use “Memory Stick Micro” on this product, please cameras may not be able to use it due to differences in format place of purchase. make sure to attach the media into M2 adaptor of standard type (FAT size, cluster size, hard disk type, or super • Please read the warranty card, fill in the specified information, size. type). If you use a , format memory cards with and retain it for future reference. If you attempt to insert “Memory Stick Micro” without your camera, instead. • The warranty period is one year from the date of purchase. attaching to M2 adaptor, there is a possibility that it cannot be pulled out. Restrictions on DOS mode Caution “Memory Stick Micro” may not operate properly when the In Windows, the reader/ writer does not operate in DOS mode. The warranty and technical support service are valid only in the media is put into Duo-size M2 Adaptor and inserted all To use the reader/writer, start up Windows. countries or sales regions specified on the warranty card. together into Memory Stick Duo adaptor. Please use an M2 Standby adaptor of standard size for proper operations. The reader/writer supports standby functions based on the PC2000 standard, which may not cover the standby function of all computers. Disable the standby function of your computer if it causes any problems. While the computer is in standby, do not insert or remove any media. Antivirus software Drive letters for the removable disk icons are assigned in alphabetical order to the CompactFlash / Microdrive Slot, If you have memory-resident antivirus software on your SmartMedia / xD-Picture Card Slot, MultiMediaCard / SD computer, the computer may hang or become unusually slow. In Memory Card Slot and “Memory Stick” Slot. this case, set your antivirus software so it does not scan the For example, if the computer has an A:, C:, and D: drive media in the reader/writer. before connecting the reader/writer, the drive letters will be Do not attempt to dismantle, repair, or alter the assigned as follows when the reader/writer is connected: reader/writer yourself Computer drive name Corresponding memory card Do not, under any circumstances, attempt to dismantle, repair, or alter the reader/writer yourself. You may not only Removable Disk (E:) CompactFlash MicroDrive permanently damage the reader/writer and/or your computer, but may also cause fire or personal injury through electrical Removable Disk (F:) SmartMedia shock. xD-Picture Card Removable Disk (G:) MultiMediaCard Operating and storage environments SD Memory Card • Do not place the reader/writer close to heat sources or in Removable Disk (H:) “Memory Stick” media direct sunlight; in dusty, dirty, or humid locations; under precipitation such as rain; or leave it in a vehicle with the 3 Insert a memory card into the corresponding slot. windows closed. When a volume label has been assigned to the memory card, • If the reader/writer interferes with the reception of radio or the volume label will be displayed together with the television signals, move the reader/writer away from the removable disk icon. radio or television. • When using the reader/writer, do not wrap it in cloth, sheets, 4 Use the removable disk icon to read or write data or covers as this may cause a malfunction or fire. on the memory card. If the following message appears, the memory card has not been recognized correctly, even though the access indicator lights up. Remove the card and insert it again.

3295886131.p65 2 4/3/10, 2:16 PM

MRW620-U1/3-295-886-13(1)