DOCSLIB.ORG

Plastic Welding Alro Plastics Has Invested the Time and Resources to Be a Major Player in Plastic Welding

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Plastic Welding Alro Plastics Has Invested the Time and Resources to Be a Major Player in Plastic Welding Alro Plastics Your Source for Engineering Plastics Sheet • Rod • Tube • Film • Profiles • Machined Parts Plastic Welding Alro Plastics has invested the time and resources to be a major player in plastic welding. From the simple butt- welding of two sheets together to the complex assembly of custom fabricated, large tanks, Alro Plastics has you covered. Please keep us in mind the next time you have a welding opportunity. Plastic Welding Highlights: Hot gas and modified extrusion welding All done in house, better control of lead times Multiple plastic materials that can be welded Pieces machined on routers for best edge finish Experienced welders who specialize in plastic welding Did you know polypro, polyethylene, PVDF, PVC, Parts are softened with hot air as the welder ex- All welding is done on site by experienced welders ABS and a few other plastics can be welded? trudes the rod, allowing bonding to take place. who specialize in plastics welding and assembly. Materials Techniques Thickness Welding Rod Tolerance HDPE, PVDF, Hot Gas welding 1/8” thick (min) Color matched Will vary by Polypropylene, and up to to sheet stock material and and PVC Modified 3/4” thick (max) equipment Extrusion welding * This chart is a guideline only. Tolerance listed is a standard, we can quote alternate tolerances as needed. Tolerances may vary depending on material. alroplastics.com 800-877-ALRO 2 5 7 6 Alro Plastics Your Source for Engineering Plastics Sheet • Rod • Tube • Film • Profiles • Machined Parts Alro Plastics is an industry leader in supplying engineering plastic shapes and parts. We cut and/or ship the same day your order is placed and provide value added processing to meet the most demanding processing requirements. PRODUCTS ABS Foamlite® Nylatron® PVC Foam Sheet Acetal Copolymer Fluorosint® Nyloil® PVDF Acetron® GP G10 / FR-4 Nylon Radel® Acrylic GPO-3 Optix® Reprocessed UHMW Boltaron® HDPE Palight® Rubber Cast Nylon Hydex® 202/301 Palsun® SafPlate® Chemgrate® Hydex® 4101/4101L PBT SafRailTM Clear PVC Hydlar® Z PEEK Sanalite® Composolite® Industrial Laminates PET Semitron® Corrugated Ketron® PEEK PETG Sustarin® C CPVC King ColorCore® Phenolic Tecaform® Cutting Board King Hy-Pact® Plexiglas® TecasintTM Delrin® King StarBoard® Polycarbonate Techtron® PPS Densetec® KomaALU® Polyethylene TIVAR® 1000 Detectables KomaTEX® Polypropylene TIVAR® 88 DuraDek® Kynar® PVDF Polystone® TIVAR® H.O.T. DuraGrate® LDPE Polystyrene Tooling Board DuraGrid® Life Science Grades Polysulfone Torlon® PAI DuraTread® LubX® C / CV PPS Tuffak® Duratron® MC® 901 Precision Board Plus UHMW-PE Ertalyte® MC® 907 Profiles Ultem® Extren® Medical Grades Propylux® Urethane Extrusions Micarta® Proteus® LF PP VHMW-PE Fiberglass Grating Noryl® PPO PTFE / TFE Vivak® Films Nyla-Glide GRTM PVC Zelux® Many products available in sheet, rod, tube and custom shapes. Please call for inquiry. CHICAGO CLEARWATER GRAND RAPIDS JACKSON LOUISVILLE MADISON HEIGHTS 279 Madsen Drive 12171 62nd St, Suite 150 4150 Broadmoor SE 2218 Enterprise 5620 Shepherdsville Rd 1750 E. Heights Drive Bloomingdale, IL 60108 Largo, FL 33773 Grand Rapids, MI 49512 Jackson, MI 49204 Louisville, KY 40228 Madison Heights, MI 48071 Phone: (888) 877-2576 Phone: (727) 573-1480 Phone: (616) 656-2820 Phone: (517) 787-5500 Phone: (502) 968-9980 Phone: (800) 877-2576 Fax: (616) 656-2828 Fax: (727) 573-1632 Fax: (616) 656-2828 Fax: (517) 787-6380 Fax: (502) 968-5530 Fax: (517) 787-6380 Toll Free: (877) 968-9980 Toll Free: (888) 877-2576 Toll Free: (800) 877-2576 Toll Free: (877) 968-9980 alroplastics.com 800-877-ALRO E12-19 2 5 7 6.
Load more

Recommended publications
  • Welding of Plastics: Fundamentals and New Developments
    REVIEW ARTICLE D. Grewell*, A. Benatar Agricultural and Biosystems Eingineering, Iowa State University, Ames, IA, USA Welding of Plastics: Fundamentals and New Developments serves as the material that joins the parts and transmits the load This paper provides a general introduction to welding funda- through the joint. In welding or fusion bonding, heat is used to mentals (section 2) followed by sections on a few selected melt or soften the polymer at the interface to enable polymer welding processes that have had significant developments or intermolecular diffusion across the interface and chain entan- improvements over the last few years. The processes that are glements to give the joint strength. Each of these categories is discussed are friction welding (section 3), hot plate welding comprised of a variety of joining methods that can be used in (section 4), ultrasonic welding (section 5), laser/IR welding a wide range of applications. This paper is devoted to welding (section 6), RF welding (section 7) and hot gas/extrusion weld- processes only. Accordingly, only thermoplastics are consid- ing (section 8). ered, because thermosets cannot be welded without the addi- tion of tie-layers such as thermoplastics layers. Greater details on welding processes can be found in several monographs [1 to 4]. 1 Introduction to Joining Welding processes are often categorized and identified by the heating method that is used. All processes can be divided Despite designers’ goals of molding single component pro- into two general categories: internal heating and external heat- ducts, there are many products too complex to mold as a single ing, see Fig.
    [Show full text]
  • PVC Linings Provide Better Corrosion Protection with Improved Welding Technique
    Material Matters PVC linings provide better corrosion protection with improved welding technique In the process industry, such as metal finishing, PVC linings are com- monly used as corrosion barriers to protect the interiors of steel tanks or concrete pits, which typically contain chemicals that are extremely corrosive, says NACE International member Cur- tis Goad, president and owner of GOAD COMPANY, a provider of custom-designed tank lining systems for the surface finishing and chemical pro- cessing industries. Open rectangular tanks and pits, as well as secondary containment areas, are typically used in surface processing such as electroplat- ing, he says, and often are lined with high-performance plasticized (flexible) PVC sheets that are bonded with adhe- sive to side walls and bottoms and sealed at the seams and corners by thermoplastic welding. The thermoplastic welding process melts the plastic welding material (rod or strip) to its molten state as well as preheats the PVC lining sheets, and applies pressure to both the welding material and the sheets to allow the molecules to fuse into a solid when cooled. Welding techniques for plastics include hot gas/hot air welding, where a hand-held welding device uses heated nitrogen gas or air to soften both the An operator uses a thermoplastic hot welding technique de- plastic welding rod or strip and the gas/hot air extrusion welding machine veloped by GOAD sheets to be joined while an operator to join PVC lining sheets. Photo COMPANY (Ellisville, moves the device along the seam. courtesy of Curtis Goad. Missouri) improves the In one method of hot gas/hot air welding, known as hand welding, an thermoplastic welding operator uses a welding gun to lay a Aprocess for polyvinyl chloride bead of material along the seam where (PVC) linings and helps prevent the base materials touch.
    [Show full text]
  • STATE-OF-THE-ART in RIGID P.V.C. PLASTIC WELDING by HOT AIR TECHNIQUE Mahmood Alam1, (Dr.) M.I
    International Journal of Technical Research and Applications e-ISSN: 2320-8163, www.ijtra.com Volume 1, Issue 2 (may-june 2013), PP. 20-23 STATE-OF-THE-ART IN RIGID P.V.C. PLASTIC WELDING BY HOT AIR TECHNIQUE Mahmood Alam1, (Dr.) M.I. Khan2 1Asstt. Professor, department of Mechanical Engineering 2 Professor, department of Mechanical Engineering Integral University, Lucknow, India while others are semi-crystalline [6]. When PVC is heated it Abstract: This paper presents the state-of-the-art in the will soften [5, 6], that allow a limited amount of chain field of plastic welding to assist in the future entanglements to assure a strong bond. developments in this field. Various important P.V.C. plastics welding parameters such as welding techniques HOT AIR TECHNIQUE in common use, equipments requirement and the effect of variables on the weld bead shape, have been discussed. Hot air technique is an external heating method. In this Problem associated with plastic welding and applications method, a weld groove and a welding rod are simultaneously have also been outlined. heated with a hot gas stream until they soften sufficiently to fuse together; the welding rod is then pressed into the weld Keywords: Poly vinyl chloride, P.V.C. welding, hot air groove to affect welding. A stream of hot air or gas technique, High-density polyethylene, linear low density (nitrogen, air, carbon dioxide, hydrogen, or oxygen) is polyethylene. directed toward the filler and the joint area using a torch. A INTRODUCTION filler rod or tap (of a similar composition as the polymer being joined) is gently pushed into the gap between the Now a day’s plastics are used in everyday life from substrates (Fig1).
    [Show full text]
  • A Research Paper on the Fundamentals of Plastic Welding
    ISSN (Online) 2394-2320 International Journal of Engineering Research in Computer Science and Engineering (IJERCSE) Vol 4, Issue 8, August 2017 A Research Paper on the Fundamentals of Plastic Welding [1] S Kennedy [1] Department of Mechanical Engineering, Galgotias University, Yamuna Expressway Greater Noida, Uttar Pradesh Email id- [email protected] Abstract: Plastic is a material including a wide scope of semi-engineered or manufactured organics that are malleable and can be formed into strong objects of various shapes. Today, joining of thermoplastic composite structures is getting increasingly huge since thermoplastic composite materials are being utilized to supplant metallic or thermoset composite material to all the more likely withstand different loads in car, aviation, rural apparatuses and marine businesses. Plastic welding is accounted for in ISO 472 as a procedure of joining mollified surfaces of materials, with the assistance of warmth. Welding of thermoplastics is practiced in three progressive stages, as follows surface planning, utilization of warmth or potentially weight, and cooling. Various welding techniques have been developed for the joining of plastic materials. This paper presents advancement one of the tourist plastic welding where the sight- seeing is utilized to circuit or soften a filler thermoplastic pole and at the same time heat the surfaces to be joined. If there should arise an occurrence of hot-gas welding the parameters of welding, for example, welding temperature, stream rate, feed rate, welding power, gas, edge, filler bar, Pressure of tourist/gas, Gap separation and shoe impact the quality of the welded joint. The presentation of the above created machine was completed by getting ready seven examples of fluctuating welding, feed rate keeping different parameters steady all through the analyses.
    [Show full text]
  • Advances in Ultrasonic Welding of Thermoplastic Composites: a Review
    Downloaded from orbit.dtu.dk on: Oct 06, 2021 Advances in Ultrasonic Welding of Thermoplastic Composites: A Review Bhudolia, Somen K.; Gohel, Goram; Leong, Kah Fai; Islam, Aminul Published in: Materials Link to article, DOI: 10.3390/ma13061284 Publication date: 2020 Document Version Publisher's PDF, also known as Version of record Link back to DTU Orbit Citation (APA): Bhudolia, S. K., Gohel, G., Leong, K. F., & Islam, A. (2020). Advances in Ultrasonic Welding of Thermoplastic Composites: A Review. Materials, 13(6), [1284]. https://doi.org/10.3390/ma13061284 General rights Copyright and moral rights for the publications made accessible in the public portal are retained by the authors and/or other copyright owners and it is a condition of accessing publications that users recognise and abide by the legal requirements associated with these rights. Users may download and print one copy of any publication from the public portal for the purpose of private study or research. You may not further distribute the material or use it for any profit-making activity or commercial gain You may freely distribute the URL identifying the publication in the public portal If you believe that this document breaches copyright please contact us providing details, and we will remove access to the work immediately and investigate your claim. materials Review Advances in Ultrasonic Welding of Thermoplastic Composites: A Review Somen K. Bhudolia 1,2,* , Goram Gohel 1,2 , Kah Fai Leong 1,2 and Aminul Islam 3,* 1 School of Mechanical and Aerospace Engineering,
    [Show full text]
  • Automated Aerial Seed Planting Using Biodegradable Polymers
    http://researchcommons.waikato.ac.nz/ Research Commons at the University of Waikato Copyright Statement: The digital copy of this thesis is protected by the Copyright Act 1994 (New Zealand). The thesis may be consulted by you, provided you comply with the provisions of the Act and the following conditions of use: Any use you make of these documents or images must be for research or private study purposes only, and you may not make them available to any other person. Authors control the copyright of their thesis. You will recognise the author’s right to be identified as the author of the thesis, and due acknowledgement will be made to the author where appropriate. You will obtain the author’s permission before publishing any material from the thesis. Automated Aerial Seed Planting using Biodegradable Polymers A thesis submitted in fulfilment of the requirements for the degree of Masters of Engineering in Mechanical Engineering at The University of Waikato by Wade Cozens 2019 The purpose of the thesis was to undertake a preliminary product design to assess the feasibility of using drone technology to aid reforestation for automated seed planting. This product would be able to increase productivity and reduce labour costs, especially when applied in difficult to reach terrains around New Zealand. Ultimately, the final product would be a weaponised drone or a swarm of drones that can fire plastic seed capsules into soil to a specific depth to prevent predation and ensure optimal germination conditions. The proof of concept hinges on the success of three objectives: Assessing and controlling the capsule’s biodegradability in soil.
    [Show full text]
  • Plastic Welding Certification Process Executive Summary
    Plastic Welding Certification Process Executive Summary Foresight Technologies (US) and Foresight Asia Pacific Sdn. Bhd. (Malaysia) are global leaders in precision CNC machining, plastic welding and high purity assembly. With a combined staff of 250 employees, 50+ CNC machine tools and 30 Certified Plastic Welders, Foresight strives to be the preferred supplier and collaborative partner of our customers. As a provider of critical plastic systems to semiconductor, aerospace and chemical equipment markets, we struggled fitting the somewhat “Artisan Craft” of plastic welding into our process driven quality systems. We understand the criticality of the chemical systems; any leak could expose operators to unsafe conditions, cause significant downtime for wafer fabs, and potentially damage millions of dollars of product. While plastic welding has many applications, in the semiconductor industry it has an additional cosmetic requirement which conflicts with many of the standard certifications. Not only must the weld be strong, it must also have minimal pits, capillaries and fluctuations in wake flow. These cosmetic imperfections can provide dead spots where bacteria and contaminants can accumulate, and this can have a major impact on wafer device performance and yield. This white paper looks at Foresight’s process of plastic welding certification, industry standards that provide the framework for plastic welder certification and explains the necessity of repeating these processes and ensuring that they meet process requirements of advanced quality OEMs. 2 Plastic Welding Certification Process Foresight’s History of Plastic Welding Years ago, Foresight recognized the wide variability in plastic welding quality, even among 20-year veterans of the trade. Everyone had their own process and unfortunately, this caused variability in the final product.
    [Show full text]
  • Joining of Nylon's Based Plastic Components
    BASF Corporation JOINING OF NYLON BASED PLASTIC COMPONENTS -- VIBRATION AND HOT PLATE WELDING TECHNOLOGIES Abstract mechanical properties. Molded nylon parts are more resistant to creep, fatigue, repeated impact, Previously we reported to SPE’96 the and so on compared to the parts made of many optimized mechanical performance of linear less rigid thermoplastics. vibration welded nylon 6 and 66 butt joints. Under the optimized vibration welding There are more than a dozen classes of conditions (amplitude, pressure, meltdown, nylon resins, including nylon 6, nylon 66, nylon thickness of interface), the tensile strength at the 46, nylon 12, etc.). Welded nylons are used in nylon butt joints was equal to or 14% higher than many industrial products, the largest being the the tensile strength of the base polymer (matrix). automotive. In recent years, demands to use non-filled, fiber-glass reinforced and filled nylon H. Potente and A. Brubel presented to products to replace metals and thermosets in SPE’94 and SPE’98 an analysis of the welding power tools, lawn / garden equipment (leaf performance in a family of amorphous and semi- blowers, chain-saws, gas-tanks), and the crystalline thermoplastics including nylon 6 automotive (air induction, power train systems, using hot-plate welding technologies. For hot- fluids reservoirs, and other uses), have increased plate welded nylon 6 with a range of glass-fiber (1, 2). reinforcement from 0 to 40% (by weight), the tensile strength at the weld was 40–60% less On average a car uses 18 kg of nylon compared to the tensile strength of the base based plastics.
    [Show full text]
  • Starting out in Plastic Welding
    Starting out in Plastic Welding Most all plastics can be joined using mechanical means (e.g., screws) and with cements and adhesives (e.g., PVC cement). Thermoplastics--plastics that become soft when heated--can also be welded using a non-flame heat source. Examples of thermoplastics include • PVC (polyvinyl chloride) • Polypropylene • ABS (acrylonitrile Butadiene Styrene) • Nylon • Vinyl • Acrylic • Polyethylene • Polycarbonate • Acetal resin • Polystyrene There's another class of plastics that don't become soft when heated--once they're set, that's it. These thermosetting plastics can't be welded. Examples include phenolic, polyester, silicone, and epoxy. To hot-gas weld plastic, air or an inert gas is heated to between 450°F and 800°F. The gas is heated by an electric element rather than a flame. A filler rod of the same material as the pieces to be joined is heated along with the joint, and the filler rod is lightly pressed into the joint (see figure on back). Torches sometimes include a special nozzle that both preheats the filler rod and guides it into the joint. Plastic can also be welded using a heated tool, induction welding, or friction (spin) welding. Hot gas plastic welders are available from several sources, but often at high prices (e.g, $326 for the low-end Kamweld model). Harbor Freight sells one for $39.99 (item 41592-1VGA), often on sale for $29.99. It includes the torch, air hose, regulator, stand, and a small selection of filler rod for PVC, polypropylene, and ABS. The “trick” to using a hand-held hot air plastic welder seems to be in part to get the temperature right.
    [Show full text]
  • Master Proheat® Plastic Welding Kit Manual
    MASTER PLASTIC WELDING ROD REORDER INFORMATION 35297 ABS Welding Rod (Pkg. of 16) Round, 1/8” Dia. x 9” Long, Natural, for welding ABS plastics MASTER PROHEAT ® 35298 PP Welding Rod Plastic Welding Kit (Pkg. of 16) Round, 1/8” Dia. x 9” Long, Natural, for welding PP plastics 35299 PVC Welding Rod (Pkg of 16) Round, 1/8” Dia. x 9” Long, Grey, for welding PP plastics 35300 LDPE Welding Rod (Pkg of 16) Round, 1/8” Dia. x 9” Long, Natural, for welding LDPE plastics 35301 HDPE Welding Rod (Pkg. of 16) Round, 1/8” Dia. x 9” Long, Black, for welding HDPE plastics MSDS Sheets available upon request. Warning: These products contain chemicals known to the State of California to cause Welding Plastics with the cancer and birth defects or other reproductive harm. Users should independently evaluate the suitability of the product for their application. MASTER PROHEAT ® Model PH-1400WK Master Appliance Corp. 2420 18th St. Professional Quality Electronic Heat Gun Racine, WI 53403 USA Plastic Welding Kit Tel: 1-800-558-9413 (toll free in the U.S.A. and Canada) Tel: 262-633-7791 (all other Countries) Fax: 262-633-9745 Email: [email protected] www.masterappliance.com P/N 58053 REV A © 2010 Master Appliance Corp. PLASTIC WELDING MASTER PROHEAT ® Plastic Welding Kit Basic requirements for plastic welding. TIME, TEMPERATURE & PRESSURE PH-1400WK Most plastics used today are thermoplastics, which are generally suitable for repair by welding. Four basic rules for plastic welding are suggested: 1. Weld with like material. Only like materials can be welded, i.e.
    [Show full text]
  • Technological Features of Welding of Plastics Based on Polyhydroxybutyrate
    Вісник Тернопільського національного технічного університету https://doi.org/10.33108/visnyk_tntu Scientific Journal of the Ternopil National Technical University 2020, № 1 (97) https://doi.org/10.33108/visnyk_tntu2020.01 ISSN 2522-4433. Web: visnyk.tntu.edu.ua UDC: 621.384.3:621.791:615.462-035 TECHNOLOGICAL FEATURES OF WELDING OF PLASTICS BASED ON POLYHYDROXYBUTYRATE Victoriya Talanyuk1; Andriy Shadrin1; Maksym Iurzhenko1; Mykola Korab1; Andriy Agapov2 1E. O. Paton Electric Welding Institute of the NAS of Ukraine, Kyiv, Ukraine 2Technical Center of the NAS of Ukraine, Kyiv, Ukraine Summary. In particular polymers and biopolymers are increasingly used in various sectors of the economy and more recently biopolymers have been replacing traditional polymers in many applications. The problem of recycling polymeric materials can also be solved by designing products that will facilitate their further processing. In fact, biodegradation is the consistent breaking of chemical bonds of a polymer molecular chain under the action of microorganisms. Destroying a polymer, bacteria, fungi or algae uses the remnants of its molecules as a source of vital organic compounds as well as energy. Usually biodegradation occurs in an aqueous or humid environment during the process of composting. Bioplastics` wastes, like fallen leaves or other organic wastes, are stacked on soil and gradually converted into environmentally friendly material. The ability of a polymer to biodegrade mainly depends on the chemical composition of its molecule. One of the urgent tasks of research and implementation of biopolymers is the connection, in particular welding. Traditionally, plastic welding is widely used in the chemical, food, and other industries, for film packaging and packaging.
    [Show full text]
  • GUIDELINES for WELDING THERMOPLASTIC MATERIALS (Hot Gas Hand and Hot Gas Extrusion Welding)
    16W301 S Frontage Rd Burr Ridge, IL 60527 630-789-0990, FAX 630-789-1380 www.wegenerwelding.com GUIDELINES FOR WELDING THERMOPLASTIC MATERIALS (Hot Gas Hand and Hot Gas Extrusion Welding) TABLE OF CONTENTS I COMMON THERMOPLASTICS AND WELDING TECHNIQUES II HOT GAS (AIR) WELDING 1 The Process in General 2 The Hot Gas (Air) Generating Equipment 3 Material Preparation 4 Tack Welding 5 High Speed Welding 6 Free Hand or Fan Welding 7 Weld Design 8 Heat Stress Problems III HOT GAS (AIR) EXTRUSION WELDING 1 General 2 Equipment and Procedure 3 Visual Check of the Final Weld IV TESTING V TEMPERATURE RECOMMENDATIONS VI BEAD SIZE RECOMMENDATIONS The information contained within are mere guidelines for welding thermoplastic materials. More detailed information is available through DVS standards established by the GERMAN WELDING SOCIETY. Please contact our company for further information. 16W301 S Frontage Rd Burr Ridge, IL 60527 630-789-0990, FAX 630-789-1380 www.wegenerwelding.com I. COMMON THERMOPLASTICS AND WELDING TECHNIQUES There are a number of methods to weld thermoplastics, which include hot gas (air) hand welding, hot gas (air) extrusion welding, butt fusion (heated element welding), friction welding, laser welding and high frequency welding. In the following, hot gas (air) hand welding and hot gas (air) extrusion welding are being addressed since they play a major role in the field of custom thermoplastic fabrication. A further application for these techniques is the modification or repair of rotationally molded, blow molded, vacuum formed or injection molded parts. The most commonly welded thermoplastic materials are Polypropylene - PP Polyethylene - PE Polyvinylchloride - PVC Chlorinated Polyvinylchloride - CPVC Polyvinyldenefluoride - PVDF Other materials such as ABS, PS, PC and PMMA are welded on a more limited basis and are not covered here in any detail.
    [Show full text]