Micron Technology Inc

Total Page:16

File Type:pdf, Size:1020Kb

Micron Technology Inc MICRON TECHNOLOGY INC FORM 10-K (Annual Report) Filed 10/26/10 for the Period Ending 09/02/10 Address 8000 S FEDERAL WAY PO BOX 6 BOISE, ID 83716-9632 Telephone 2083684000 CIK 0000723125 Symbol MU SIC Code 3674 - Semiconductors and Related Devices Industry Semiconductors Sector Technology Fiscal Year 03/10 http://www.edgar-online.com © Copyright 2010, EDGAR Online, Inc. All Rights Reserved. Distribution and use of this document restricted under EDGAR Online, Inc. Terms of Use. UNITED STATES SECURITIES AND EXCHANGE COMMISSION Washington, D.C. 20549 FORM 10-K (Mark One) ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 For the fiscal year ended September 2, 2010 OR TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 For the transition period from to Commission file number 1-10658 Micron Technology, Inc. (Exact name of registrant as specified in its charter) Delaware 75 -1618004 (State or other jurisdiction of (IRS Employer incorporation or organization) Identification No.) 8000 S. Federal Way, Boise, Idaho 83716 -9632 (Address of principal executive offices) (Zip Code) Registrant ’s telephone number, including area code (208) 368 -4000 Securities registered pursuant to Section 12(b) of the Act: Title of each class Name of each exchange on which registered Common Stock, par value $.10 per share NASDAQ Global Select Market Securities registered pursuant to Section 12(g) of the Act: None (Title of Class) Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes No Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act. Yes No Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes No Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes No Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§ 229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act: Large Accelerated Filer Accelerated Filer Non -Accelerated Filer Smaller Reporting Company (Do not check if a smaller reporting company) Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes No The aggregate market value of the voting stock held by non-affiliates of the registrant, based upon the closing price of such stock on March 4, 2010, as reported by the NASDAQ Global Select Market, was approximately $6.1 billion. Shares of common stock held by each executive officer and director and by each person who owns 5% or more of the outstanding common stock have been excluded in that such persons may be deemed to be affiliates. This determination of affiliate status is not necessarily a conclusive determination for other purposes. The number of outstanding shares of the registrant’s common stock as of October 19, 2010, was 996,245,706. DOCUMENTS INCORPORATED BY REFERENCE Portions of the Proxy Statement for registrant’s 2010 Annual Meeting of Shareholders to be held on December 16, 2010, are incorporated by reference into Part III of this Annual Report on Form 10-K. PART I Item 1. Business The following discussion contains trend information and other forward-looking statements that involve a number of risks and uncertainties. Forward-looking statements include, but are not limited to, statements such as those made in“Products” regarding increased sales of DDR3 DRAM products and growth in demand for NAND Flash products and solid -state drives; and in “Manufacturing” regarding the transition to smaller line-width process technologies. Our actual results could differ materially from our historical results and those discussed in the forward-looking statements. Factors that could cause actual results to differ materially include, but are not limited to, those identified in “Item 1A. Risk Factors.” All period references are to our fiscal periods unless otherwise indicated. Corporate Information Micron Technology, Inc., and its consolidated subsidiaries, a Delaware corporation, was incorporated in 1978. As used herein, “we,” “our,” “us” and similar terms include Micron Technology, Inc. and its subsidiaries, unless the context indicates otherwise. Our executive offices are located at 8000 South Federal Way, Boise, Idaho 83716-9632 and our telephone number is (208) 368-4000. Information about us is available on the internet at www.micron.com. Copies of our Annual Report on Form 10-K, Quarterly Reports on Form 10-Q and Current Reports on Form 8-K, as well as any amendments to these reports, are available through the our website as soon as reasonably practicable after they are electronically filed with or furnished to the Securities and Exchange Commission (the “SEC”). Materials filed by us with the SEC are also available at the SEC’s Public Reference Room at 100 F Street, NE, Washington, D.C. 20549. Information on the operation of the Public Reference Room is available by calling (800) SEC-0330. Also available on our website are our: Corporate Governance Guidelines, Governance Committee Charter, Compensation Committee Charter, Audit Committee Charter and Code of Business Conduct and Ethics. Any amendments or waivers of our Code of Business Conduct and Ethics will also be posted on our website at www.micron.com within four business days of the amendment or waiver. Copies of these documents are available to shareholders upon request. Information contained or referenced on our website is not incorporated by reference and does not form a part of this Annual Report on Form 10-K. Overview We are a global manufacturer and marketer of semiconductor devices, principally DRAM, NAND Flash and NOR Flash memory, as well as other innovative memory technologies, packaging solutions and semiconductor systems for use in leading-edge computing, consumer, networking, embedded and mobile products. In addition, we manufacture semiconductor components for CMOS image sensors and other semiconductor products. We market our products through our internal sales force, independent sales representatives and distributors primarily to original equipment manufacturers and retailers located around the world. Our success is largely dependent on the market acceptance of our diversified portfolio of semiconductor products, efficient utilization of our manufacturing infrastructure, successful ongoing development of advanced process technologies and the return on research and development investments. We obtain product for sale through two primary channels: 1) production from wholly-owned manufacturing facilities and 2) production from our joint venture manufacturing facilities. In recent years, we have obtained additional manufacturing scale and diversity of products through strategic acquisitions and various partnering arrangements, including joint ventures which have helped us to attain lower cash costs than we could otherwise achieve through internal investments alone. In addition, we have leveraged our significant investments in research and development by sharing costs of developing memory product and process technologies with our joint venture partners. In 2010, we had two reportable segments, Memory and Numonyx. Our other business activities are reflected in All Other nonreportable segments. Due to the similarity of activities and processes for the Memory and Numonyx segments, within the Business section of this report, only areas where there are significant differences are presented by segment. The continued integration of Numonyx into our operations will likely result in the re-definition of our reportable segments in 2011. Memory: The Memory segment’s primary products are DRAM and NAND Flash, which are key memory components used in a broad array of electronic applications, including personal computers, workstations, network servers, mobile phones and other consumer applications including Flash memory cards, USB storage devices, digital still cameras, MP3/4 players and in automotive applications. We are focused on improving our Memory segment’s competitiveness by developing new products, advancing our technology and reducing costs. 1 Numonyx: On May 7, 2010, we completed our acquisition of Numonyx Holdings B.V. (“Numonyx”), which manufactures and sells NOR Flash, NAND Flash, DRAM and Phase Change memory technologies and products. We acquired Numonyx in a stock-for-stock transaction to further strengthen our portfolio of memory products, increase manufacturing and revenue scale, access Numonyx’s customer base and provide opportunities to increase multi-chip offerings in the embedded and mobile markets. (See “Item 8. Financial Statements – Notes to Consolidated Financial Statements – Numonyx Holdings B.V.” note.) All Other: Operating results of All Other primarily reflect activity of our wafer manufacturing operations for CMOS image sensors and also include activity of our microdisplay, solar and other operations. We manufacture CMOS image sensor products for Aptina Imaging Corporation (“Aptina”), which is 35% owned by us, under a wafer supply agreement.
Recommended publications
  • Different Types of RAM RAM RAM Stands for Random Access Memory. It Is Place Where Computer Stores Its Operating System. Applicat
    Different types of RAM RAM RAM stands for Random Access Memory. It is place where computer stores its Operating System. Application Program and current data. when you refer to computer memory they mostly it mean RAM. The two main forms of modern RAM are Static RAM (SRAM) and Dynamic RAM (DRAM). DRAM memories (Dynamic Random Access Module), which are inexpensive . They are used essentially for the computer's main memory SRAM memories(Static Random Access Module), which are fast and costly. SRAM memories are used in particular for the processer's cache memory. Early memories existed in the form of chips called DIP (Dual Inline Package). Nowaday's memories generally exist in the form of modules, which are cards that can be plugged into connectors for this purpose. They are generally three types of RAM module they are 1. DIP 2. SIMM 3. DIMM 4. SDRAM 1. DIP(Dual In Line Package) Older computer systems used DIP memory directely, either soldering it to the motherboard or placing it in sockets that had been soldered to the motherboard. Most memory chips are packaged into small plastic or ceramic packages called dual inline packages or DIPs . A DIP is a rectangular package with rows of pins running along its two longer edges. These are the small black boxes you see on SIMMs, DIMMs or other larger packaging styles. However , this arrangment caused many problems. Chips inserted into sockets suffered reliability problems as the chips would (over time) tend to work their way out of the sockets. 2. SIMM A SIMM, or single in-line memory module, is a type of memory module containing random access memory used in computers from the early 1980s to the late 1990s .
    [Show full text]
  • Semiconductor Contract Manufacturing Worldwide, 1997
    t). Semiconductor Contract Manufacturing Worldwide—SCMS-WW to Re- Document Publication order Code Date Document Title Tab: Perspective • SCMS-WW-DP-9701 February 3, 1997 DQ Predicts: Semiconductor Contract Manufacturing in 1997 y a SCMS-WW-DP-9702 March 17, 1997 Telebriefing Summary: Is the Recovery Around the Corner in Wafer Fab Equipment? Or Will the Slowdow/n Extend into 1998? ^ a SCMS-WW-DP-9703 May 12, 1997 Semiconductor Contract Manufacturing W^fer Pricing Trends / a SCMS-WW-DP-9704 June 9, 1997 1996 Fabless Semiconductor Review v a SCMS-WW-DP-9705 June 16. 1997 System-Level Integration ASICs Add Embedded DFIAM y a SCMS-WW-DP-9706 July 21, 1997 Wafer Fab Equipment Market Forecast and Capacity Update • SCMS-WW-DP-9707 August 25, 1997 The Challenges of Embedded DRAM in ASICs: A Manufacturing K/" Economics Point of View • SCMS-WW-DP-9708 September 1, 1997 Capital Spending And Wafer Fab Equipment Midyear Forecast Update: Real Recovery in Progress? Or Is Another Stall in the Works'' ^-^ a SCMS-WW-DP-9709 December 1, 1997 Amkor Wafer Fabrication Services'^ • SCMS-WW-DP-9710 October 13, 1997 IBM Transfers First Copper Metallization Process into Production) a SCMS-WW-DP-9711 November 10, 1997 A Ride Down Intel's Pricing Escalator • SCMS-WW-DP-9712 December 22, 1997 Semiconductor Contract Manufacturing Wafer Pricing Trends: Fall 1997 y Tab: Market Trends a SCMS-WW-MT-9701 September 15, 1997 Midyear 1997 Forecast: Semiconductor Contract Manufacturing Tab: Market StatisUes a SCMS-WW-MS-9701 November 24, 1997 1996 Semiconductor Contract Manufacturing
    [Show full text]
  • Zynq-7000 All Programmable Soc and 7 Series Devices Memory Interface Solutions User Guide (UG586) [Ref 2]
    Zynq-7000 AP SoC and 7 Series Devices Memory Interface Solutions (v4.1) DS176 April 4, 2018 Advance Product Specification • I/O Power Reduction option reduces average I/O Introduction power by automatically disabling DQ/DQS IBUFs and The Xilinx® Zynq®-7000 All Programmable SoC and internal terminations during writes and periods of 7 series FPGAs memory interface solutions cores provide inactivity high-performance connections to DDR3 and DDR2 • Internal VREF support SDRAMs, QDR II+ SRAM, RLDRAM II/RLDRAM 3, and • LPDDR2 SDRAM. Multicontroller support for up to eight controllers • Two controller request processing modes: DDR3 and DDR2 SDRAMs o Normal: reorder requests to optimize system throughput and latency This section discusses the features, applications, and functional description of Xilinx 7 series FPGAs memory o Strict: memory requests are processed in the order interface solutions in DDR3 and DDR2 SDRAMs. These received solutions are available with an optional AXI4 slave interface. LogiCORE™ IP Facts Table Core Specifics DDR3 SDRAM Features Supported Zynq®-7000 All Programmable SoC (1) • Component support for interface widths up to 72 bits Device Family 7series(2) FPGAs • Supported DDR3 Component and DIMM, DDR2 Single and dual rank UDIMM, RDIMM, and SODIMM Memory support Component and DIMM, QDR II+, RLDRAM II, RLDRAM 3, and LPDDR2 SDRAM Components • DDR3 (1.5V) and DDR3L (1.35V) Resources See Table 1. • 1, 2, 4, and 8 Gb density device support Provided with Core • 8-bank support Documentation Product Specification • x8 and x16 device
    [Show full text]
  • Trabajo De Graduación: Valuación De Micron Technology Inc. Autor: Nicolas Vallejos DNI: 40127617 Director De Tesis: Ignacio Warnes Buenos Aires, El 11 De Mayo 2021
    Universidad de San Andrés Universidad de San Andrés Escuela de Administración y Negocios Magister en Finanzas Trabajo de Graduación: Valuación de Micron Technology Inc. Autor: Nicolas Vallejos DNI: 40127617 Director de tesis: Ignacio Warnes Buenos Aires, el 11 de mayo 2021 1 Universidad de San Andrés Contenido Micron Technology 4 1. La industria de semiconductores: 8 1.1 El plan “made in China.” 9 2. Mercado de DRAM y NAND: 11 2.1 DRAM: 13 2.1.1. El mercado DRAM 13 2.1.2. Una Consolidación del mercado 16 2.1.3 Clases de DRAM: 19 2.2 NAND: 20 2.2.1. El mercado NAND 21 2.2.2. Una Consolidación del mercado 23 2.2.3. Tipos de NAND: 24 3. Análisis macroeconómico: 25 3.1 Estados Unidos: 25 3.2 Europa: 26 3.3 China: 28 4. Análisis financiero 28 4.1 Ratios de crecimiento: 28 4.2 Ratios de deuda: 35 4.3 Análisis de Dupont 35 4.4 Márgenes de Micron 37 4.5 Ratios de eficiencia: 38 5. Capex e I+D: 39 6. Manufactura: 42 7. Adquisiciones: 44 8. Patentes 45 9. Valuación por flujos descontados 46 9.1 Proyección de mercados 46 9.1.1 Mercado DRAM y NAND 46 9.1.2 Proyección cuotas de mercado Micron en DRAM 56 9.1.3 Proyección cuotas de mercado Micron en NAND 58 2 Universidad de San Andrés 9.2 Proyección inversión y desarrollo 61 9.3 Proyección de CAPEX 61 9.4. Estimación costo de los bienes vendidos 62 9.5 Estimación de depreciación y amortización 63 9.6.
    [Show full text]
  • PART I ITEM 1. BUSINESS Industry We Are
    PART I ITEM 1. BUSINESS Industry We are the world’s largest semiconductor chip maker, based on revenue. We develop advanced integrated digital technology products, primarily integrated circuits, for industries such as computing and communications. Integrated circuits are semiconductor chips etched with interconnected electronic switches. We also develop platforms, which we define as integrated suites of digital computing technologies that are designed and configured to work together to provide an optimized user computing solution compared to ingredients that are used separately. Our goal is to be the preeminent provider of semiconductor chips and platforms for the worldwide digital economy. We offer products at various levels of integration, allowing our customers flexibility to create advanced computing and communications systems and products. We were incorporated in California in 1968 and reincorporated in Delaware in 1989. Our Internet address is www.intel.com. On this web site, we publish voluntary reports, which we update annually, outlining our performance with respect to corporate responsibility, including environmental, health, and safety compliance. On our Investor Relations web site, located at www.intc.com, we post the following filings as soon as reasonably practicable after they are electronically filed with, or furnished to, the U.S. Securities and Exchange Commission (SEC): our annual, quarterly, and current reports on Forms 10-K, 10-Q, and 8-K; our proxy statements; and any amendments to those reports or statements. All such filings are available on our Investor Relations web site free of charge. The SEC also maintains a web site (www.sec.gov) that contains reports, proxy and information statements, and other information regarding issuers that file electronically with the SEC.
    [Show full text]
  • Micron Technology Inc
    MICRON TECHNOLOGY INC FORM 10-K (Annual Report) Filed 10/25/11 for the Period Ending 09/01/11 Address 8000 S FEDERAL WAY PO BOX 6 BOISE, ID 83716-9632 Telephone 2083684000 CIK 0000723125 Symbol MU SIC Code 3674 - Semiconductors and Related Devices Industry Semiconductors Sector Technology Fiscal Year 08/30 http://www.edgar-online.com © Copyright 2011, EDGAR Online, Inc. All Rights Reserved. Distribution and use of this document restricted under EDGAR Online, Inc. Terms of Use. UNITED STATES SECURITIES AND EXCHANGE COMMISSION Washington, D.C. 20549 FORM 10-K (Mark One) ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 For the fiscal year ended September 1, 2011 OR TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 For the transition period from to Commission file number 1-10658 Micron Technology, Inc. (Exact name of registrant as specified in its charter) Delaware 75-1618004 (State or other jurisdiction of incorporation or organization) (IRS Employer Identification No.) 8000 S. Federal Way, Boise, Idaho 83716-9632 (Address of principal executive offices) (Zip Code) Registrant's telephone number, including area code (208) 368-4000 Securities registered pursuant to Section 12(b) of the Act: Title of each class Name of each exchange on which registered Common Stock, par value $.10 per share NASDAQ Global Select Market Securities registered pursuant to Section 12(g) of the Act: None (Title of Class) Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.
    [Show full text]
  • Intel® 80331 I/O Processor Design Guide Contents
    Intel® 80331 I/O Processor Design Guide March 2005 Order Number:273823-003 Intel® 80331 I/O Processor Design Guide Contents INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. Intel products are not intended for use in medical, life saving, life sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice. Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order. Copies of documents which have an order number and are referenced in this document, or other Intel literature, may be obtained by calling1-800-548- 4725, or by visiting Intel's website at http://www.intel.com. AlertVIEW, AnyPoint, AppChoice, BoardWatch, BunnyPeople, CablePort, Celeron, Chips, CT Connect, CT Media, Dialogic, DM3, EtherExpress, ETOX, FlashFile, i386, i486, i960, iCOMP, InstantIP, Intel, Intel logo, Intel386, Intel486, Intel740, IntelDX2, IntelDX4, IntelSX2, Intel Create & Share, Intel GigaBlade, Intel
    [Show full text]
  • Westwood Marketing Flash Metrics and Analysis
    Westwood Marketing Flash Metrics and Analysis January 2009 www.WestwoodMarketing.Biz 2009 Kicks Off with NAND Production Cuts – Where is the Killer App? For the past four or five years the NAND market has crashed during the first week of December, only to be resurrected late in Q1 with a killer application that comes into save the day. Almost always, the savior (this time, SSD’s) is not the one who generated industry excitement during the second half of the previous year. In December, production was cut dramatically. Maybe this time the industry has it right—SSDs are not going to save the day in 2009. Market Highlights "Those that fail to learn from history are doomed to repeat it." - Winston Churchill In 2005 NAND manufacturers lead us to believe that embedded NAND flash used in mobile NAND Market applications would increase by a factor and soak up oversupply. That demand never DRAM exchange expects materialized (has it yet?), and it took Q2 2005 rumors of a flash based iPod, and Apple’s 81% NAND flash bit growth Nano introduction in September 2005 to control NAND price erosion. A nearly identical in 2009 more situation occurred in late 2006, when industry leader SanDisk set high unit sales expectations Toshiba for their MicroSD products. MicroSD sales suffered from slower than anticipated adoption in Delays NAND plant mobile phones, due to capacity mix issues and pricing. Industry expectations soon were re- construction in western set by Apple’s iPhone introduction. Japan more Numonyx Spot Market Historic Pricing Rolls out 41 nm MLC and 48 $32 nm SLC NAND processes $28 more $24 $20 Toshiba $16 Reduces NAND flash output $12 by 30% more $8 $4 Financial Market $0 SanDisk shares increased Jan-07 Apr-07 Jul-07 Oct-07 Jan-08 Apr-08 Jul-08 Oct-08 9.48% or $1.05 on Monday 8 Gbit 16 Gbit 32 Gbit January 5, while Micron saw 16.9% in gains to $3.32.
    [Show full text]
  • Baby Steps to Our Future by Ron Fenley
    Baby Steps to our Future by Ron Fenley Memory – Past, Present and Future, Part 2 of 3 Memories,… food for the EGO. Manifestation of memories into self-esteem, honor, dignity and many other traits characterize the individual. Obviously, memories are stored in the brain and scientist have identified, subdivided, labeled and compartmentalized the brain in many functional regions. Computer memory like human memory manifests it presents in different ways to perform a variety of functions; and computer memory has been divided into partitions, subsystems and specialization. Although the memory in today’s computers have not been programmed with personality traits, some PC systems do demonstrate personality disorders, particularly the one this article was written with. There is an abundance of terms that have been used to describe or label computer memory functions, features and attributes. Some terms apply to the hardware technology, some terms apply to the packing of these chips and others apply to the memory usage or memory systems within the computer. Collectively, all of these terms may be confusing and to help sort out and clarify these labels we will look at how these items have been applied to computer memory. To simplify this task, the effort will be divided into the following 5 areas: packing, parity & ECC, buffered/non-buffered, systems and labels. MEMORY PACKAGING Just as memory technology has evolved so has memory packaging. Shown below is a table of the different form factors (packaging) that has been used in memory deployment over
    [Show full text]
  • Micron: Changes for Continued Success Rachel Rice [email protected]
    University of Nebraska at Omaha DigitalCommons@UNO Theses/Capstones/Creative Projects University Honors Program 5-2018 Micron: Changes for Continued Success Rachel Rice [email protected] Follow this and additional works at: https://digitalcommons.unomaha.edu/ university_honors_program Part of the Business Administration, Management, and Operations Commons Recommended Citation Rice, Rachel, "Micron: Changes for Continued Success" (2018). Theses/Capstones/Creative Projects. 5. https://digitalcommons.unomaha.edu/university_honors_program/5 This Dissertation/Thesis is brought to you for free and open access by the University Honors Program at DigitalCommons@UNO. It has been accepted for inclusion in Theses/Capstones/Creative Projects by an authorized administrator of DigitalCommons@UNO. For more information, please contact [email protected]. DECEMBER 11, 2017 MICRON CHANGES FOR CONTINUED SUCCESS RACHEL RICE UNIVERSITY OF NEBRASKA AT OMAHA Kayser Hall 208, 6001 Dodge Street, Omaha, NE 68182 Table of Contents Executive Summary 3 Introduction 5 Figure 1 5 History 6 Product Offerings 6 Figure 2 7 Management Changes 8 Acquisitions, Partnerships & Physical Expansion 9 Problem Statement 11 Figure 3 11 Internal Analysis 12 Figure 4 12 Figure 5 13 External Analysis 13 PESTEL 14 Porter’s Five Forces 17 Figure 6 17 Recommendation 18 Figure 7 19 Recommendation Implementation 21 Conclusion 22 References 23 2 Executive Summary Strategy is important for every industry, and to succeed in such a competitive industry as the technology industry, it becomes imperative. As the following describes in great detail, Micron Technology, Inc. (Micron) is one of the companies in the technology industry that must have a strategic plan such as this. The first step to developing this plan for Micron was to analyze the strategy that Micron has employed so far through a detailed description of their previous developments.
    [Show full text]
  • Printmgr File
    August 31, 2020 Dear Fellow Shareholder: You are cordially invited to attend the 2020 Annual General Meeting of Shareholders of Seagate Technology plc, which will be held at 5:00 p.m. Irish Standard Time on Thursday, October 22, 2020, at 10 Earlsfort Terrace, Dublin 2, D02 T380, Ireland. Due to public health concerns and continuing uncertainty in connection with COVID-19, this year we also are offering you the opportunity to virtually join the Annual General Meeting via live webcast over the Internet at 5:00 p.m. Irish Standard Time (12:00 p.m. Eastern Daylight Time). You may virtually join the Annual General Meeting and submit your questions during the meeting by visiting www.virtualshareholdermeeting.com/STX2020. In accordance with Irish law, we are required to have a principal meeting place, which is a physical location, where shareholders may attend the Annual General Meeting in person and vote. However, in light of public health concerns and travel recommendations and restrictions, we strongly advise shareholders not to attend in person at the principal meeting place, and ask that shareholders join the Annual General Meeting virtually instead. Shareholders joining virtually will not be able to vote at the meeting. Your vote is important. We encourage shareholders to cast their votes in advance of the Annual General Meeting, whether they plan to attend in person or join virtually. We continue to monitor COVID-19 developments and other circumstances. Should we determine that alternate Annual General Meeting arrangements may be advisable or required, such as changing the date, time or location of the Annual General Meeting, we will announce our decision by press release, post additional information at investors.seagate.com, and make a public filing with the U.S.
    [Show full text]
  • Anti-Slavery Performance in 2016 | First Edition
    Corporate Compliance with the California Transparency in Supply Chains Act: 1 Anti-Slavery Performance in 2016 Copyright © Development International 2017 When citing this publication please use the following information: Authors: Chris N. Bayer and Jesse H. Hudson Title: Corporate Compliance with the California Transparency in Supply Chains Act: Anti-Slavery Performance in 2016 Version: First Edition Date published: March 7, 2017 The views expressed in this report are solely those of the authors. Furthermore, the information contained in this document should not be construed as legal advice. In case of questions please contact: Chris N. Bayer, PhD at <[email protected]>. Funded by: iPoint-systems gmbh www.ipoint-systems.com Corporate Compliance with the California Transparency in Supply Chains Act: 2 Anti-Slavery Performance in 2016 Foreword “With every dollar that we spend, we vote for the world we want.” – Diane Osgood, Economist and expert on social impact economics As UN Goodwill Ambassador against trafficking and slavery in 2005, my first trip was to visit Lake Volta in Ghana – the second largest man-made lake in the world. When children’s dead bodies began washing up on the lake’s shores, locals raised alarm and took action. I met with them, and with children who’d been bought, sold, beaten, famished, raped, abused and forced to dive in fear of their lives, to catch fish larger than their arm-span, and disentangle nets caught on the branches of trees that no one bothered to clear from the lake. And as I walked away, I uneasily asked if the fish was ever sold in Europe.
    [Show full text]