I Z E R W A R E N
2011
Izerwaren
Wholesale Marine Hardware Catalog
2011 Edition 1
Non Corrosive Fine Building and Ships Hardware IZERWAREN.COM GASSPRINGS.NET STAINLESSSTEELBUILDINGHARDWARE.COM STAINLESSSTEELDOCKHARDWARE.COM
© IZERWAREN.COM. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
How to use this catalog Page 0-1
Picture direct above: Lever #14.J373 Rose #14.J371 page TR-14-6-5 Also see our website: izerwaren.com/decorative trim from Jado/ Picture Top Right: Door holder #34.MDH; see page 3-4-1 Middle Left: page 8-8-1 Picture Middle Right: page 4-3-0-4
Welcome to Izerwaren. This Catalog is for the trade professional, the user of high-end quality hardware for custom built yachts of every size. All our products are backed by commercial warrantee and fully supported by Izerwaren service. Detailed drawings (color) pictures and or samples are available for all products in this catalog. If there is an item you need which is not shown in this catalog, we can source it for you. Due to our extensive network, we can meet your needs most efficiently at prices more competitive, with shorter delivery time, than you find elsewhere. Our Showroom and Office is at: 2207 South Andrews, Fort Lauderdale, Fl 33316.
Our Mailing Address is: 2207 South Andrews, Fort Lauderdale, Fl 33316.
Web Sites: www.izerwaren.com www.shipshardware.com.www.gassprings.net How to use this catalog Page 0-1
picture: Lever #900 escutcheon #989 See our website: izerwaren.com/decorative trim/page TR-13
How to Use this Catalog Welcome to Izerwaren. This catalog is a reference source for the trade professional, the user of high-end quality hardware for custom built yachts of every size. All our products are backed by commercial warrantee and fully supported by Izerwaren service. Izerwaren sells to the trade only, all prices are whole sale. Additional discounts are available for quantity purchase orders. We will be happy to give you a written proposal regarding our hardware at any time. Detailed drawings (color) pictures and or samples are available for all products in this catalog.
If there is a item you need which is not shown in this catalog, we can source it for you. Due to our extensive network, we can meet your needs most efficiently at prices more competitive, with shorter delivery time, than you find elsewhere. How to order from this catalog:
Please fax or mail us on your company letterhead. For companies that have established an account with Izerwaren, payment by check is granted, otherwise delivery is by COD or with full payment prior to delivery.
What to mention when ordering or inquiring: Please specify order number, the description of the product, including size and finish, and the page number in the catalog for the item that you wish to order.
Since most of our products are imported from Northern Europe and often re- assembled and/or modified to specific applications in the US, please allow sufficient lead-time when placing an order. Our Showroom and Office is at: 2207 South Andrews, Fort Lauderdale, Fl 33316. You are welcome at our showroom anytime. Please call in advance for an appointment, as we are often visiting clients.
Our Mailing Address is: 2207 South Andrews, Fort Lauderdale, Fl 33316. web sites: www.izerwaren.com www.shipshardware.com. www.gassprings.net E-mail: sales-person’[email protected]: ([email protected])
We are very proud to offer you the 2008 version of our catalog. Thank you for considering Izerwaren Inc.
IZERWAREN PVD COATINGS ~ LIFE TIME FINISH ~ DIAMOND FINISH Page 0-0-1
PVD Coatings (Physical Vapor Deposits) are applied in a sophisticated process using vacuum chambers and very hard materials. Materials such as Zirconium and Titanium are applied to hardware with a base material of either brass or stainless steel. For decorative coatings Izerwaren offers custom finishes on selected hardware in the colors Brass, Gold and Nickel. Izerwaren offers Life Time Warrantee on selected hardware using PVD coatings.
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
IZERWAREN PVD COATINGS ~ LIFE TIME FINISH ~ DIAMOND FINISH Page 0-0-2
PVD Coatings (Physical Vapor Deposits) are applied in a sophisticated process using vacuum chambers and very hard materials. Materials such as Zirconium and Titanium are applied to hardware with a base material of either brass or stainless steel. For decorative coatings Izerwaren offers custom finishes on selected hardware in the colors Brass, Gold and Nickel. Izerwaren offers Life Time Warrantee on selected hardware using PVD coatings.
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware Hardware Groups Page 0-2
For Alphabetic Index: see next page
1. Ship Locks: a full program in Stainless Steel and Brass Rim Locks and Mortise Locks; Lever Handles and Escutcheons, Door Knobs and Pulls ______
2. Cabinet Locks, Latches in brass, stainless steel, diecast and nickel plated steel ______
3. Door Holders, Door Stops, Door Closers, Door Stays in Brass, Stainless steel, Anodized Aluminum ______
4. Special Hinges and Hatch Fasteners, Toggle Devices, Window Stays Brass, Stainless steel, Nylon ______
5. Sliding door Hardware, Flush lever handles, Flush bolts, 316 Stainless steel sliding door tracks in stainless steel, aluminum and ferrous materials ______
6. Stainless Steel Gas Springs (Gas Lifts) with Valves ______
7. Wheelhouse Chairs ______
8. Glass Door Hardware, Refrigerator door hardware
______
9. Fire hydrants, hoses and nozzles Bulwark gate hardware, Cleats, Bollards, Hawser Rngs
______
Section: “Trim” Decorative Lever handles, roses and escutcheons Not included with this catalog, please ask for the separate Decorative Trim Brochure
Section: “Cabinet Pulls” Decorative pulls for cabinets Not included with this catalog, please ask for the separate Cabinet Pulls Brochure
Izerwaren Incorporated and D.B.A. “Izerwaren Europe BV”, are Wholesale Companies specializing in Importing and Distributing European Non Corrosive Fine Building Hardware and Ship Hardware and Parts and Materials, suitable to the Building and Yacht Industry. Mailing address, deliveries, showroom and office: 2207 South Andrews Avenue, Fort Lauderdale, Florida 33316. Visits by appointment. Please call ahead to: 954-763-6686
We reserve the right to discontinue items in this catalog or to refuse selling items mentioned or not mentioned in this catalog or discontinue giving service to buyers without giving prior and/or ample notice and/or reason
© IZERWAREN.COM. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
Index, alphabetic Page 0-3
Description part Material Particulars Section, Page Barrel bolts brass, stainless st. page 5-5-1 Bollards stainless steel hawser rings page 9-2-4A; page 9-2-4-B Cabinet key locks brass, die-cast, steel page 2-4; page 2-2 and following Cabinet knobs brass, die-cast, st.st. page 2-1; page 2-2; page 2-2-4; page 2-3; page 2-4 Cabinet knobs brass, ask for this special section: “Cabinet Pulls” Cabinet rim locks Brass, steel, steel, page 2-1; page 2-2; page -2-2-1; page 2-2-2; page 2-2-3; page 2-3; and latches stainless steel, plastic page 2-3-2 and following
Door dogs stainless steel page 4-3; page 4-3-1; page 4-4; page 4-4-0; page 4-4-1 brass page 4-4-2; page 4-4-3 Door Trim, see Trim brass Please ask for this special section: “Trim Brochure” Door holders brass, stainless stl page 3-1 through page 3-6 Drawer catch stainless steel page 5-5-2 Drawer slides stainless steel page 5-5-2 Flush bolts stainless stl & brass page 5-5 Flush pulls stainless steel, brass page 1-17 (hatch fasteners) stainless steel page 2-1; page 2-2-4; page 2-3; page 2-4 stainless steel page 4-3; page 4-3-1; page 4-3-2; page 4-3-3; 4-3-4 (hatch pulls) brass page 4-6; page 5-2 stainless steel page 4-2-10; page 4-3 and following ; Flush lever handles stainless steel, brass page 5-1 and following
Gas springs stainless steel Section 6
Glass door hdw brass/die-cast shower door pages 8-2; 8-3; 8-4; 8-5; 8-6; Hinges stainless steel special hinges Section 4 page 4-1 through 4-2-9 brass
Hydrants, fire . page 9-1; page 9-1-1 fighting equipment
Key Cylinders brass cylinder knob’s page 0-5
Lever handles stainless steel pages 1-1; 1-1-1page; 1-1-2; page 1-2 ask for special decorative levers Lever handles Stainless steel, GSV Backset 55/40mm page 1-4, 1-4-1, 1-4-2 brass, Budget backset 40 mm page 1-6-0 brass, Budget backset 40 mm page 1-6-1 brass, Classic backset 30 mm page 1-8 brass, designer backset 30 mm page 1-8-1 brass, GSV backset 30 mm page 1-8-2 backset 30,40 55 page 1-9-1; 1-10 backset 40, 55 page 1-11 backset 30,40 55 page 1-12
Locks, mortise stainless steel backset 55 mm page 1-1, 1-1-0, 1-1-1, 1-1-2, 1-2, 1-4-1, 1-9-1 Locks, mortise brass backset 60 mm page 1-18 Locks, mortise brass backset 55 mm page 1-4 Locks, mortise brass backset 40 mm page 1-6 Locks, mortise brass backset 30 mm page 1-8 Locks, mortise brass backset 25 mm page 1-8 Locks, double door stainless / steel backset 45 mm page 1-19 Locks, rim brass backset 55 mm page 1-3 Locks, rim brass backset 40 mm page 1-5 Locks, rim brass backset 30 mm page 1-7 Locks, sliding stainless steel backset 55 mm page 1-1 Locks, sliding stainless steel backset 40 mm page 1-14 Locks, sliding brass backset 55 mm page 1-13, 1-13-1, 1-13-2 Locks, sliding brass backset 40 mm page 1-6, page 1-14, 1-14-A Locks, sliding brass backset 55 mm page 1-3 Locks, sliding steel backset 50 mm page 1-13-1 Locks, sliding steel backset 25 mm page 1-13-1 Locks, tubular steel backset 2 3/8 and 2 page 1-18-1 3/4 Pocket door locks aluminum page 1-13-2 See also sliding door locks, page: 1-12, 1-13-3 and foll.
Pulls straight & stainless steel page 1-15; page 1-16 round
Refridgerator door hardware page 8-7 and following Sliding door locks: see locks, sliding page 1-13, 1-13-1, 1-13-2, 1-13-3, 1-14
Sliding door track stainless steel page 5-4, 5-4-1, 5-4-2 Wheelhouse chairs pages 7-10, 7-11 Window stays page 4-5
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware Hand of Door, for Mortise and Rim Locks, Sizes of Profile Cylinders Page 0-4
Please indicate HANDING when ordering MORTISE locks:
Please indicate ALSO on Purchase Order: • Thickness of door • whether the lock is mortised in the middle or of center • If not: please state how far of center • Backset of lock • Function of lock (entry, privacy or passage) • Trim on both sides or one side, • In case of one side trim: Please indicate inside or outside.
Please indicate HANDING when ordering RIM MOUNTED locks:
Please also indicate: • Thickness of door • Indicate one of the four possibilities in above drawing • Backset of lock • Function of lock (entry, privacy or passage) • Trim on both sides or one side; In case of one side trim: Please indicate inside or outside.
Please indicate HANDING when ordering LIFT OFF HINGES:
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
Profile Cylinders, sizes and functions Page 0-5 Izerwaren order numbers
05.488 Profile cylinder Short 26.5+26.5= 53 mm key/key 05.407 Profile cylinder Short 26.5+26.5= 53 mm key/knob
#05.488 short profile cylinder key/key
05.400 Profile cylinder normal 30+30= 60 mm key/key 05.405 Profile cylinder normal 30+30= 60 mm key/knob
05.400 Profile cylinder custom size key/key + 5 mm 05.405 Profile cylinder custom size key/knob +5 mm 05.487 Profile cylinder, 60 mm, privacy (slotted bolt/knob) 05.489 Profile cylinder, 60 mm, privacy (slotted bolt/key)
slotted bolt depicted Possible sizes profile cylinders, special orders 05.415 Profile cylinder, half size 30 mm key 05.416 Profile cylinder, half size 30 mm knob
half cylinder depicted half cylinder dimensions
05.105 key blanks, silver nickel #05.006 #05.899 #05.517 05.006 Wilka knob 32 mm diameter, 35.5 mm long 05.899 Ferraro knob 05.517 Valenti Knob 05.008 Jado Knob 991 05.602 GSV Schwepper knob, ribbed model 05.502 GSV Schwepper knob, classic model 09.P07 Bisschop knob old 4007 indicator: 09.P33 #13.J91 #05.602 #05.502
knob 09.P07 indicator 09.P33 round
09.P005 Bisschip knob new 4005 #09.P07 #09.P005 13.J454 #13.J453 indicator: 09.P00
knob 09.P005 indicator 09.P00 flat
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
Stainless Steel Locks 55 mm backset Meets all DIN fire class requirements Page 1-1
Izerwaren Order • Backset 55 mm - 2 3/16” numbers • Stainless Steel Heavy duty locks
• Available as full mortise or rim lock • Excellent for use in outside applications and in a sea- water environment for heavy doors • Standard finish: Brushed stainless steel • Sizes lock case for all types:
• 80 x 150 x 17 mm; front plate: 22 x 210 x 3 mm;
• distance center hole spindle to cylinder: 95.5 mm
11.312 Stainless Steel Entry Mortise Lock (Trioving 5312) Heavy Duty, reinforced one piece latch-bolt, for heavy weather and interior doors. For use with Oval Cylinder with key outside For use with Oval Cylinder with knob inside
for 8 x 8 or 9 x 9 mm square spindle
11.316 Stainless Steel Entry Mortise Lock (Trioving 5316) Triple latch-bolt, for medium heavy exterior and interior doors. For use with Oval Cylinder with key outside Entry lock #11.316 with solid latch bolt: #11.312
For use with Oval Cylinder with knob inside for 8 x 8 or 9 x 9 mm square spindle
11.317 Stainless Steel Privacy Mortise Lock (Trioving 5316) Triple latch-bolt, for medium heavy exterior and interior doors. for 8 x 8 or 9 x 9 mm square spindle for 5 x 5 mm square spindle for thumb-turn
11.336 Stainless Steel Passage Mortise Lock (Trioving 5336) Triple latch-bolt, for medium heavy exterior and interior doors. for 8 x 8 or 9 x 9 mm square spindle on door handle
11.341 Stainless Steel Dead-bolt Mortise Lock (Triov5341) Operates dead bolt through cylinder key/knob For cylinders specify key/key or key/knob
11.382 Stainless Steel Sliding Mortise Lock (Triov5383) Heavy Duty, Double hook bolt, for heavy exterior and interior doors.
for 8 x 8 or 9x9 mm square spindle Sliding door lock #11.382 (Entry an Privacy function available)
11.383 Strike plate for sliding door lock, stainless steel
Size Strike plate 32 x 157 mm
11.384 Strike Box 32 x 157 x 22 mm
11.313 Strike plate for swinging door lock, stainless steel Size Strike plate 135 x 22 + 10 mm
11.314 Strike Box Strike plate 135 x 22 + 10 mm
Ask for custom size strike plates with long lip
11.520 Oval Cylinder (half) with key. Body: 32 mm
11.543 Oval Cylinder (half) with knob. Body:-32 mm
11.544 Oval Cylinder (half) with knob. Body:-32 mm Finish: polished chrome brass Specify door thickness: 44 - 52 - 60 mm #11.313 #11.383 Specify if lock is not centered in door Strike plate swinging door locks #11.313 22 x 135 mm / 10 mm Strike plate for sliding door lock #11.383 32 x 157 mm 11.555 Extensions for cylinder or thumb-turn 15 mm, brass
11.508 Keys, nickel silver; special keying available
STRONGEST PRODUCTION LOCK AVAILABLE !!
For Stainless Steel Lever Handles & Extensions #11.555 Keyed Oval Cylinder #11.520 Thumb-turn #11.544 Escutcheons: SEE PAGE 1-2 Also custom indicator part available. We match also Brass Designer Hardware with these locks
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware Stainless Steel Locks 55 mm backset Trioving Trim and Parts s Page 1-1-0
Izerwaren Order • Trioving trim for Stainless Steel Heavy duty locks numbers • For locks see page 1-1 For alternative trim see page 1-2
11.605 Stainless Steel Lever Handle, (Trioving 8605) U shape model 133 x 57 mm for 8 x 8 mm square spindle
11.653 Stainless Steel Escutcheon plate (Trioving 8653) rectangular 187 x 50 x 2 mm
11.363 Chrome Plated lever handle (Trioving 5316) Standard model 109 x 49 mm for 8 x 8 mm square spindle
11.715 Chrome plated escutcheon plate (Trioving
Stainless steel escutcheon #8653 187x50x2mm 7715)
rectangular 187 x 50 x 2 mm
11.509 Chrome plated rose for lever(Trioving 7509) Diameter 54 mm, 6 mm thick
11.962 Chrome plated roses for cylinder (Trioving 5962) Diameter 54 mm 6 mm thick 9 mm thick Stainless steel U shaped Lever #8605 133x57mm
12 mm thick
11.695 Spacer Plate of black plastic for escutcheon
(Trioving 7695) plate …
spacer plate #7695 11.520
11.543 Oval Cylinder (half) with key. Body: 32 mm 11.544 Oval Cylinder (half) with knob. Body:-32 mm Oval Cylinder (half) with knob. Body:-32 mm Brass chrome plated escutcheon #7715 187x50x2mm Finish: polished chrome brass
Specify door thickness: 44 - 52 - 60 mm
Specify if lock is not centered in door
11.555
Extensions for cylinder or thumb-turn 15 mm, brass
11.508 Keys, nickel silver; special keying available
For moreStainless Steel Lever Handles & Escutcheons: SEE PAGE 1-2
We match also Brass Designer Brass chrome plated lever handle #5316 109x49mm Hardware with Trioving locks
Brass chrome plated roses #7509 PC rose #5967, 54 mm diameter
Extensions #11.555 Keyed Oval Cylinder #11.520 Thumb-turn #11.543 Trioving entry lockset with chrome trim
Stainless Steel Trims and Locks Page 1-1-1
MIRROR POLISHED STAINLESS STEEL LEVER MIRROR POLISHED STAINLESS POLISHED STAINLESS HANDLE #12.527; ESCUTCHEON #12.222 STEEL LEVER HANDLE #12.527 LEVER HANDLE #12.527 STAINLESS STEEL ENTRY LOCK #11.312 AND ESCUTCHEON #12.222 ESCUTCHEON #12.222; OVAL CYLINDER KEYWAY #11.520 PVD COATED BRASS COLOR STAINLESS STEEL ENTRY LOCK #11.312
MIRROR POLISHED STAINLESS STEEL STEEL LEVER HANDLE #12.527 POLISHED STAINLESS SEMI FLUSH LEVER LEVER HANDLE #12.527 SIDE VIEW HANDLE #12.53F; EXTENDS ONLY 1 1/16” ESCUTCHEON #12.222 SATIN STAINLESS FINISH FROM SURFACE. ESCUTCHEON #12.222 STAINLESS STEEL ENTRY SLIDING STAINLESS STEEL ENTRY SLIDING LOCK LOCK #11.383 #11.383
• NYLON SLEEVE #12.223 AVAILABLE TO BE MOUNTED UNDER ESCUTCHEON TO PREVENTION ELECTROLYSES ON ALUMINUM EXTERIOR WEATHER DOORS
• THESE STAINLESS STEEL TRIM SETS ARE VERY WELL SUITED FOR EXTERIOR APPLICATIONS FOR WEATER TYPE DOORS • SUITABLE FOR TRIOVING AND GSV SCHWEPPER SHIPS LOCKS
• ALL ORDER NUMBERS FOR PARTS AND ACCESSESSORIES ON CATALOG PAGES 1-1 AND 1-2 • PVD COATING AVAILABLE ON SELECTED STAINLESS STEEL PARTS IN SEVERAL COLORS. PVD COATING IS SCRATCH RESISTANT, INFRARED AND ULTRAVIOLET PROOF, SEAWATER PROOF AND LIFETIME WARRANTED
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
Stainless Steel Trims and Locks Page 1-1-2
Izerwaren Stainless steel trim fittings for full Order mortise ships locks Numbers
Stainless PST polished stainless steel steel SST satin stainless steel Trim LTF life time finish polished brass Sets color
12.050 Knob lever; 50 mm diameter Knob # 12.050; 50 mm diameter; stands off: 35 mm
Rose #12.110; 55 mm diameter
12.110 Rose for levers; 56 mm ∅
12.111Z Rose for Profile cylinder; 56 mm ∅ Lever # 12.527; 135 mm long; stands off 58 mm Rose #12.110; 55 mm diameter
12.111T Rose for Oval Cylinder; 56 mm ∅
12.527 Lever Classic; 135 mm long
12.547 Lever L shape; 132 mm long
12.045 Lever U shape; 131 mm long
12.548 Lever Cropped; 140 mm long Lever #12.547; 132 mm long; stands off 64 mm 12.223 Escutcheon square 260x56x9 mm Rose #12.110; 55 mm diameter
12.222 Escutcheon round 245x45x9 mm
12.224 Escutcheon small 170x46x5.5 mm
12.507 Oval Rose for lever 66.5 x 29.5 mm
Lever # 12.045; 131 mm long; stands off 54 mm; 18 mm diameter Rose #12.110; 55 mm diameter
12.517 Oval Rose; for Profile Cylinder 66.5 mm x 29.5 mm
12.329 Thumb-turn #12.329 Indicator #12.327
12.327 Indicator for Privacy locks Cropped Lever # 12.021; 148 mm long; stands off 52 mm; 19 mm diameter Oval Rose #12.507; 66.5 x 29.5 mm
Escutcheon #12.221 Escutcheon #12.222 Escutcheon #12.224 Rose #12.110 Oval Rose #12.507 260 x 56 x 9 mm 245 x 45 x 9 mm 170 x 46 x 5.5 mm 56 mm ∅ 66.5 x 29.5 mm Lever #12.527 Lever #12.527 Lever #12.527 Lever #12.527 Lever #12.527
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
Stainless Steel Trim for Fire Rated Doors Page 1-1-2-1
Izerwaren Stainless steel trim fittings for fire Order rated doors Numbers Fire Codes require: • 9 mm stainless steel spindles Stainless • Stainless steel inner roses steel finish; Trim PST polished stainless steel Sets SST satin stainless steel
LTF life time finish polished brass color
12.110S Rose #12.110S fire rated for levers; 56 mm ∅. Inner rose stainless steel
Lever # 12.527; 135 mm long; stands off 58 mm Rose #12.110S; 55 mm diameter, stainless steel inner rose With 9x9 mm stainless steel spindle
12.110S2 #12.110S2 Inner rose, stainless steel
12.110S3 #12.110S3 Connecting Nut, for assembly inner and out rose, stainless steel Lever # 12.045; 131 mm long; stands off 54 mm; 18 mm diameter Rose #12.110S; 55 mm diameter, stainless steel inner rose With 9x9 mm stainless steel spindle
12.111Z Rose for Profile cylinder; 56 mm ∅ Not fire rated
12.111T Rose for Oval Cylinder; 56 mm ∅ Picture showing fit of rose assembly with lever, all stainless steel Not fire rated
12.527 Lever Classic; 135 mm long
12.045 Lever U shape; 131 mm long
12.110SK
Installation key to screw down rose
12.329 Thumb-turn #12.329 Indicator #12.327 12.327 With roses #12.110S 56 mm ∅ For use with privacy lock Picture illustrates use of installation key to screw down rose
© IZERWAREN.COM Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
Stainless Steel Door Handles and Escutcheons for stainless steel locks Page 1-2 SPECIAL Izerwaren • Stainless Steel Door handles and Stainless Steel Escutcheon Order numbers • For 5300 series stainless steel locks #12.527
• for ship locks and applications in a sea-water environment
• Specify Finish:
• SS: Satin stainless steel
• SP: Mirror Polished stainless steel • PVD: hard coated in brass or gold color
12.53F #12.53F drawings
Semi Flush door handle #12.53F 143 mm x 25 mm Projects 1 1/8” from surface door, including the escutcheon
12.94F Lever #12.94F size: 120 x 30 mm stand off
Lever #12.94F showing in stainless steel recessed back plate
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware Stainless Steel Door Handles and Escutcheons for stainless steel locks Page 1-2 Izerwaren Order • Stainless Steel Door handles and Stainless Steel numbers Escutcheon • For 5300 series stainless steel locks
• for ship locks and applications in a sea-water
environment
• Specify Finish: • SS: Satin stainless steel
• SP: Mirror Polished stainless steel #12.527 • PVD: hard coated in brass or gold color
12.527 Stainless steel door handle 135 mm x 58 mm
#12.53F
12.53F Semi Flush door handle
143 mm x 25 mm
Projects 1 1/8” from surface door, including the escutcheon
Stainless steel lever handle #12.527 and escutcheon #12.222; with key way 12.224 Stainless steel escutcheon plate #11.520. Trioving lock: catalog page 1-1
with radius, 170 x 46 x 5.5 mm
Clip on; Screws invisible
12.222 Stainless steel escutcheon plate with radius, 245 x 45 x 9 mm Outside plate screws invisible
Inside plate screws visible
12.223 Nylon sleeves for use with aluminum doors #12.224
only for escutcheon #12.222
12.221 Stainless steel escutcheon plate
with square corners, 260 x 56 x 9 mm
Outside plate screws invisible
Inside plate screws visible
12.110 Stainless steel roses 55 mm ∅
With nylon inner rose, screws invisible
#12.222
12.111 Stainless steel semi flush door handle Stainless steel cylinder roses 55 mm ∅ #12.53F with escutcheon #12.222 for
with nylon inner rose, screws invisible; stainless steel mortise locks. specify Profile or Oval cylinder (Trioving lock #11.382; catalog page 1-1)
12.200 Stainless steel spindle 8x8 mm
When ordering specify door thickness
12.260 Stainless steel through bolts M6 x 60 /100 mm
When ordering specify door thickness
12.004 Stainless steel set screws M6
Well suited for aluminum bulkhead doors and full
weather doors. #12.221
Stainless steel lever handle #12.527 with Specify door thickness and function lock stainless steel round rose #12.110; See also page 1-1; 1-1-1; 1-1-2 56 mm diameter
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
Brass and Stainless Steel Rim Locks - 55 mm backset Meets DIN #81300 standard ~ Page 1-3
Izerwaren • Brass rim lock, backset 55 mm - 2 3/16” Order • Minimum door thickness 12 mm - 1/2”
Numbers • Solid brass latch bolt
• Specify left or right hand and door thickness
• Strike plate or strike box NOT included
• Specify strike box or strike plate
• Specify finish:
• BPC polished chrome plated brass
• BSC satin chrome plated brass
• BP polished brass
13.27Z (3227Z) Entry Rim Lock Center spindle hole to center key hole: 75
mm #13.27Z strikes13.226 #13.225 #2827Z #13.232 Case: 80 mm x 179 mm x 25 mm thick stainless steel brass
For 9 x 9 mm spindle /door lever handles 13.225 (3225) Strike Box 13.226 (3226) Strike Plate
13.27W
(3227WC) Privacy Rim Lock
Center spindle hole to center key hole: 75 #13.231 Strike Box 13.230 mm Case: 80 mm x 179 mm x 25 mm thick
9 x 9 mm spindle for lever handles 7 x 7 mm spindle for thumb-turn #13.27W 13.225
(3225) Strike Box
13.226
(3226) Strike Plate
13.228 (3228) Angle Strike Plate
13.232 #3239Z brass rim lock
(3232) Passage Rim Lock
Case: 80 mm x 105 mm x 25 mm thick
#13.232 9 x 9 mm spindle for lever handles
13.230
(3230) Strike box 13.231
(3231) Strike plate
13.39Z (3239Z) Dead Bolt Rim Lock
Case: 80 mm x 105 mm x 18.5 mm thick
Works with Profile Cylinder Key Way only #4231: stainless steel rim lock 13.230 (3230) Strike box 13.241 #13.397Z #13.230 (3241) Strike plate
(4231Z) 13.31Z STAINLESS STEEL Dead Bolt Rim Lock
Case: 75 mm x 95 mm x 18 mm thick
Works with Profile Cylinder Key Way only
Finish: brushed 304 stainless steel
Specify left or right; see page 0-4
(2320Z)
#13.230 13.20Z STAINLESS STEEL Dead Bolt Lock #13.31Z dead bolt rim lock STAINLESS STEEL Case: 100 mm x 120 mm x 18 mm thick
Works with Profile Cylinder Key Way only 2 THROWS, 1”total Finish: satin 304 stainless steel
Can be used in pantographic doors and as a rim lock and inside st.st. framed doors lock has no front plate
Profile Cylinder 1400 series see page 0-5
#11.312Box Trioving rim lock set, stainless steel
#13.20Z faceplate Dead bolt rim lock STAINLESS STEEL Available in 304 and 316 stainless steel Specify rim locks left or right and Rim lock available in 50, 60, 80, 100 mm backset
inside or outside.
See page 0-4 for chart. THIS LOCK IS SPECIALLY SUITED FOR LAZARET DOORS AND
PANTOGRAPHIC DOORS!
#13.20Z: stainless steel deadbolt lock
Stainless Steel Rim Latch Page 1-3 -A
Izerwaren Order • Stainless steel rim lock, backset 19 mm –or
Numbers 3/4 inch • Specify left or right hand and door thickness
• Strike plate or strike box separate • Finish: unfinished stainless steel
15.255R Rim Latch (right or left) 15.255L Case: 86 mm high x 51 mm wide 13.5 mm thick. Latch protrudes 13 mm For 8 x 8 mm spindle. 304 stainless steel door lever handles outside only (optional) indicator/emergency release (optional) outside backset: 3/4 inch or 19 mm.
15.142 Strike Plate 100 x 28 mm; Lip 6.5 mm rounded
1.5 mm thick. 316 stainless steel.
* Please Specify left or right
#15.255R Rim latch for model shown: DIN Right hand. back set for outside: 19 mm or ¾”
Left Hand
Right Hand Arrow shows push direction to operate latch.
Picture: With budget lever #18.740 with oval rose #18.087 and spindle outside.
#15.255L Rim latch Left hand #15.142 strike plate
WORKS WELL ON LAZARET DOORS AND WET STORAGE AREA DOORS
Rated for light to medium heavy doors up to 180 lbs. (This is no dogging device)
#15.142 strike plate #15.255L Rim latch; Left Hand showing
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
Stainless Steel Rim Locks - 55 mm backset Meets DIN #81300 fire standards ~ Page 1-3-C
Izerwaren • Stainless steel rim lock, Order • backset 55 mm - 2 3/16”
Numbers • Strike plate or strike box NOT included
(3227Z) Entry Rim Lock 13.27Z Stainless steel, for heavy doors
Center spindle to center key hole: 75 mm Case: 95 mm x 179 mm x 23 mm thick For 9 x 9 mm spindle /door lever handles For use with profile cylinders
Profile Cylinder sizes: see page 0-5 05.450
#13.27Z Rim lock stainless steel
side view #13.27Z
14.129 Escutcheon plate #14.129 entry model square holes for through bolts
Through bolts M10/ 3/8” for lock mounting
#13.27Z Rim lock stainless steel
14.999 Levers #14.999 set stainless steel
14.231 Strike Plate stainless st. 25 x 180 mm
Strike Plate stainless steel 25 x 180 mm 13.228 Angle Strike Plate #14.231
26 x 180 mm x 13 mm chrome plated brass Angle strike #13.228 chrome/brass
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
Stainless Steel Rim Locks - 55 mm backset Meets DIN #81300 standard ~ Page 1-3-D Izerwaren • Stainless steel rim lock, Order • backset 55 mm - 2 3/16” Numbers
• Strike plate or strike box
NOT included 13.27Z
Entry Rim Lock 304 Stainless steel, for heavy doors Backset: 55 mm
Center spindle to center key hole: 75 mm Case: 95 mm x 179 mm x 23 mm thick For 9 x 9 mm spindle for levers
13.27ZS Entry Rim Lock, dead bolt only
As above, but without levers 304 Stainless steel, for heavy
doors Backset: 55 mm 13.27Z rimlock with deadbolt Case: 95 mm x 179 mm x 23 Operated by profile cylinder mm thick (not shown)
304 stainless steel
05.405 Key way for rimlock 13.27Z Rim lock See page 0-5
13.27F Rim Latch 304 Stainless steel, for heavy doors Backset: 55 mm Center spindle to center key hole: 75 mm Case: 95 mm x 179 mm x 23 mm thick For 9 x 9 mm spindle /door lever handles
13.27F rim latch Operated lever only 304 stainless steel 13.27F Rim Latch
14.231P strike 14.626P strike
11.501 Entry Rim dead bolt lock 304 stainless steel, for heavy
doors 11.501 rim lock Operated by key only (PC) Operated by key lever only Backset: 70 mm 304 stainless steel Double throw 14+ 12 mm = 26 Double throw 14+ 12 mm = 26 mm mm
Case: 110 x 90 mm high
11.501 rim Dead Bolt lock
Entry Rim lock set complete Sample mounting, #11.312SC Trioving rim lockset mirror polished stainless Mirror polished stainless steel See also page 1-1
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
Stainless Steel Rim Locks - 70 mm backset Meets DIN #81300 standard ~ Page 1-3-E
#11.501 DOUBLE THROW 14+12 MM = 26 MM = 1 inch LEFT HAND #11.502 RIGHT HAND
Rim Lock #11.502 S&B rim lock, stainless steel Right Hand Rim Lock #11.501 S&B rim lock, stainless steel Left Hand 70 mm backset - 2 3/4” backset DOUBLE THROW 14+12 MM = 26 MM = 1 inch
#05.445 profile cylinder key/key or key knob see page 0-5 catalog #12.111.Z Rose for Profile cylinder; 55 mm ∅ use asymmetric profile cylinder key/key depending on door thickness satin stainless steel Please specify door thickness
Brass Rim Latch 55 mm backset Meets DIN #81300 standard ~ Page 1-3-F
Izerwaren Order
Numbers
Strike plate #14.231
Rim latch#115302
Strike plate 14.231P - passage Strike plate 14.2310 entry
angle strike #112214 strike box #112224
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware Stainless steel Mortise Locks – Oversight Page 1-4-
#14.73Z Standard Stainless Steel Lock Set 55 mm backset - Titanium Gold coated Stainless Steel Lever and Escutcheon. Ordering Details: see page 1-4-B to 1-4-M
#14.3127 Stainless Steel Entry lock Set with 65 mm backset Stainless Steel Lever and Escutcheon. Ordering Details: see page 1-4-0
Sliding door lock Sets and - see page 1-13; 1-13-B; and 1-1
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
Stainless steel Mortise Locks - 65 mm backset Meets all fire codes Page 1-4-0
Izerwaren • Extra Heavy Duty Mortise Lock, Order • Backset 65 mm – numbers • For doors of more then 150 lbs
• Stainless steel bolts • Round corners on lock plate • Stainless steel strike plate separate • Specify finish:
• Satin stainless steel
• polished stainless steel
14.3127 Entry Door Mortise Lock Lockcase: 97 mm x 164 mm x 16 mm Backset 65 mm Front plate 235 x 24 mm PC= 72 mm For 9x9 mm spindle /door lever handles 304 stainless steel
Locking: Use with profile cylinder
key/key or knob/key; see page 0-5
14.0031 Strike plate stainless steel
#14.3127 Entry lock heavy duty
14.3178 Stainless steel Privacy Door Mortise Lock #14.3127 Entry lock 65 mm backset Lockcase: 97 mm x 164 mm x 16 mm Backset 65 mm Front plate 235 x 24 mm WC= 72 mm For 9x9 mm spindle /door lever handles 316 stainless steel
14.0031 Strike plate stainless steel
12.527 Lever # 12.527; 135 mm long; stands off 58 mm Stainless steel 12.110S Rose #12.110S; 55 mm diameter Stainless steel 14.0031 Strike plate stainless steel
#14.3178 Privacy lock 65 mm backset
#12.045 U shapes lever stainless steel #12.110S rose; stainless steel
Rose #12.110S fire rated for levers; 55 mm diameter, stainless steel
#12.111Z Rose Profile cylinder; stainless steel 55 mm ∅
Escutcheon #12.222 For profile cylinder specifics: see page 0-5 Lever #12.527 Lock #14.3178 Additional information levers and All 304 Stainless steel Escutcheons: page 1-1-2 Keyway + Knob #05.405 Polished chrome brass #12.222 Escutcheon 45 x 245 mm Stainless steel; escutcheon available Escutcheon available with stainless steel for entry, privacy and passage set up inner escutcheon upon special order
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
Stainless steel Mortise Locks - 55 mm backset Meets all fire codes ~ GSV #3800 series Page 1-4-2
Alternative stainless steel trim, see page 1-1; 1-1-1. For Trioving locks, Gsv Locks
and other shipslocks
Stainless steel mortise locks with stainless steel lever and escutcheon trim, PVD (titanium) coated. Details: see page 1-4-1 and 0-0-1 PVD coating
Stainless steel Entry mortise lock #3811Z Privacy mortise lock #3811WC Passage mortise lock #3811F
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
Stainless steel Mortise Locks - 65 mm backset Meets all fire codes Page 1-4-A
Izerwaren • Extra Heavy Duty Mortise Lock, Order • Backset 65 mm – numbers • For doors of more then 150 lbs
• Stainless steel bolts • Round corners on lock plate • Stainless steel strike plate separate • Specify finish:
• Satin stainless steel
• polished stainless steel
14.270 Entry Door Mortise Lock Extra heavy duty Lockcase: 98 mm x 165 mm x 16 mm thick Backset 65 mm Front plate 235 x 24 mm PC= 72 mm For 9x9 mm spindle /door lever handles 316 stainless steel
Locking: Use with profile cylinder
key/key or knob/key; see page 0-5
14.275 Strike plate stainless steel
14.271 Privacy Door Mortise Lock #14.270 Entry lock heavy duty #14.270 Entry lock heavy duty
Extra heavy duty
Lockcase: 98 mm x 165 mm x 16 mm thick
Backset 65 mm
Front plate 235 x 24 mm
WC= 72 mm
For 9x9 mm spindle /door lever handles
316 stainless steel
14.275 Strike plate stainless steel
14.276 Passage Door Mortise Lock
Extra heavy duty
Lockcase: 98 mm x 165 mm x 16 mm thick
Backset 65 mm
Front plate 235 x 24 mm
For 9x9 mm spindle /door lever handles
316 stainless steel
14.277 Strike plate stainless steel
14.275 Strike plate stainless steel
#12.045 U shapes lever #12.110 #rose Stainless steel See page 1-1-2 for details
For profile cylinder specifics: see page 0-5
Escutcheon #12.222 Lever #12.527 Stainless steel See page 1-1-2 for details
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware Stainless steel Mortise Locks - 65 mm backset Meets all fire codes Page 1-4-0
Izerwaren • Extra Heavy Duty Mortise Lock, Order • Backset 65 mm – numbers • For doors of more then 150 lbs
• Stainless steel bolts • Round corners on lock plate • Stainless steel strike plate separate • Specify finish:
• Satin stainless steel
• polished stainless steel
14.3127 Entry Door Mortise Lock Lockcase: 97 mm x 164 mm x 16 mm Backset 65 mm Front plate 235 x 24 mm PC= 72 mm For 9x9 mm spindle /door lever handles 304 stainless steel
Locking: Use with profile cylinder
key/key or knob/key; see page 0-5
14.0031 Strike plate stainless steel
14.3178 Privacy Door Mortise Lock Lockcase: 97 mm x 164 mm x 16 mm #14.3127 Entry lock 65 mm backset Backset 65 mm Front plate 235 x 24 mm #14.3127 Entry lock heavy duty WC= 72 mm Stainless steel For 9x9 mm spindle /door lever handles 316 stainless steel
14.0031 Strike plate stainless steel
12.527 Lever # 12.527; 135 mm long; stands off 58 mm Stainless steel 12.110S Rose #12.110S; 55 mm diameter Stainless steel
14.0031 Strike plate stainless steel
#14.3178 Privacy lock 65 mm backset
#12.045 U shapes lever stainless steel Rose #12.110S fire rated for levers; #12.110S rose; stainless steel 55 mm diameter, stainless steel
#12.111Z Rose Profile cylinder; stainless steel 55 mm ∅
For profile cylinder specifics: see page 0-5
#12.222 Escutcheon 45 x 245 mm Additional information levers and Escutcheon #12.222 Escutcheons: page 1-1-2 Stainless steel; escutcheon available Lever #12.527 for entry, privacy and passage set up Stainless steel
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware Stainless steel Mortise Locks - 65 mm backset Meets all fire codes Page 1-4-A
Izerwaren • Extra Heavy Duty Mortise Lock, Order • Backset 65 mm – numbers • For doors of more then 150 lbs
• Stainless steel bolts • Round corners on lock plate • Stainless steel strike plate separate • Specify finish:
• Satin stainless steel
• polished stainless steel
14.270 Entry Door Mortise Lock Extra heavy duty Lockcase: 98 mm x 165 mm x 16 mm thick Backset 65 mm Front plate 235 x 24 mm PC= 72 mm For 9x9 mm spindle /door lever
handles
316 stainless steel Locking: Use with profile cylinder 14.275 key/key or knob/key; see page 0-5
Strike plate stainless steel
14.271 #14.270 Entry lock heavy duty #14.270 Entry lock heavy duty
Privacy Door Mortise Lock
Extra heavy duty
Lockcase: 98 mm x 165 mm x 16 mm
thick
Backset 65 mm
Front plate 235 x 24 mm
WC= 72 mm
14.275 For 9x9 mm spindle /door lever
handles
316 stainless steel
14.276
Strike plate stainless steel
Passage Door Mortise Lock
Extra heavy duty
Lockcase: 98 mm x 165 mm x 16 mm
thick 14.277 Backset 65 mm Front plate 235 x 24 mm For 9x9 mm spindle /door lever handles 316 stainless steel 14.275 Strike plate stainless steel Strike plate stainless steel
#12.045 U shapes lever #12.110 #rose Stainless steel
For profile cylinder specifics: see page 0-5
Escutcheon #12.222 #12.111Z Rose Profile cylinder; Lever #12.527 stainless steel 56 mm ∅ Stainless steel See page 1-1-2 for details See page 1-1-2 for details
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
Stainless steel Mortise Locks - 55 mm backset Meets all SOLAS fire codes 1– 4 - B
Izerwaren • Mortise lock, backset 55 mm - 2 3/16” Order • Minimum recom. Doorthickness 32 mm - 1 1/4” Stainless steel numbers • With anti- friction triple latch bolt Entry mortise locks
• Round corners on lock & strike plate with profile cylinder • Strike plate not included with lock keyway • Specify left or right hand and door thickness
• Specify finish:
• Satin stainless steel
• Mirror polished stainless steel
• Mirror Polished titanium coated
• (brass color or gold color)
14.73Z Entry Mortise Lock with triple latch bolt Stainless steel Front plate, casing, latch and deadbolt. Case: 80 mm x 152 mm x 16 mm thick Center spindle hole to center key hole: 75 mm Front plate 210 x 25 mm For 9x9 mm spindle /door lever handles With triple latch bolt Use with profile cylinder key/key or key/knob
14.73SZ Entry Mortise Lock with solid latch bolt
14.226 Strike plate Stainless steel #14.73Z5
Entry set with Profile Cylinder depicted in polished stainless steel finish
#14.73Z Stainless steel entry mortise lock case with triple latch bolt
width lock case 16 mm 5/8”
14.2263 Strike plate Stainless steel, cut, bend Specify cut and bend when ordering.
Profile cylinder #1400 series:
Specify: Key/key or key/knob or knob/indicator #14.73Z lock case; #14.2263 strike Specify door thickness and function cylinder. in polished stainless steel finish See for functions cylinders: Catalog page 0-5.
Escutcheon #14.129; Lever #14.999 Stainless steel trim set depicted in satin stainless steel finish
faceplate entry mortise lock
25 x 210 mm 14.999
Lever handles stainless steel #14.73SZ Stainless steel 105 x 47 mm
entry mortise lock case 14.129 Escutcheon plates stainless steel with solid latch bolt 165 x 45 mm
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
Stainless steel Mortise Locks - 55 mm backset Meets all SOLAS fire codes Page 1-4-C
Izerwaren • Mortise lock, backset 55 mm - 2 3/16” Order • Minimum recom. Doorthickness 32 mm - 1 1/4” Stainless steel numbers • With anti- friction triple latch bolt Privacy mortise lock
• Round corners on lock & strike plate
• Strike plate not included with lock • Specify left or right hand and door thickness • Specify finish:
• Satin stainless steel
• Mirror polished stainless steel
• Mirror Polished Life Time Finish
• (brass color or 24 K gold color)
14.73W Privacy Mortise Lock with triple latch bolt
Stainless steel Front plate, casing, latch and deadbolt. Case: 80 mm x 152 mm x 16 mm thick Center spindle hole to center spindle: 75 mm Front plate 210 x 25 mm For 9x9 mm square spindle / door lever handles For 7x7 mm square spindle / thumb-turn indicator
14.73SW #14.73W5 Privacy Mortise Lock with solid latch bolt
full privacy set depicted
14.226 in satin stainless steel finish Strike plate Stainless steel
#14.73W Stainless steel privacy mortise lock case with triple latch bolt
width lock case 16 mm 5/8” 14.2263 Strike plate Stainless steel, cut, bend
Specify cut and bend when ordering.
#14.73W lock case; #14.2263 strike
in polished stainless steel finish
Stainless steel escutcheons & lever handles. Depicted in satin stainless steel finish Escutcheon #14.118 with thumb-turn; Escutcheon #14.117 red/green indicator Escutcheon #14.116 slotted indicator
Lever handles #14.999
14.129
Escutcheon plates stainless steel set
165 x 45 mm with thumb turn and indicator 14.118 Escutcheon plate single thumb-turn
165 x 45 mm with thumb turn
14.117 Escutcheon plate single indicator faceplate privacy mortise lock
165 x 45 mm with indicator 25 x 210 mm #14.73SW Stainless steel 14.116 Escutcheon plate single slotted bolt Privacy mortise lock case
165 x 45 mm with indicator
with solid latch bolt
14.999 Lever handles stainless steel
105 x 47 mm
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
Stainless steel Mortise Latch - 55 mm backset Meets all SOLAS fire codes Page 1-4-D
Izerwaren • Mortise latch, backset 55 mm - 2 3/16” Order • Minimum recom. Doorthickness 32 mm - 1 1/4” Stainless steel numbers • With anti- friction triple latch bolt Passage mortise latch
• Round corners on lock & strike plate
• Strike plate not included with lock • Specify left or right hand and door thickness • Specify finish:
• Satin stainless steel
• Mirror polished stainless steel
• Mirror Polished Life Time Finish
• (brass color or 24 K gold color)
14.73F Passage Mortise Latch with triple latch bolt
Stainless steel Front plate, casing, latch and deadbolt. Case: 80 mm x 152 mm x 16 mm thick Front plate 210 x 25 mm For 9x9 mm square spindle / door lever handles
14.73SF Passage Mortise Latch with solid latch bolt
14.626 Strike Plate Stainless Steel #14.73F5 full passage set depicted in satin stainless steel finish
#14.73F Stainless steel passage mortise latch case with triple latch bolt
14.6263 Strike plate Stainless steel, cut, bend Specify cut and bend when ordering. width latch case 16 mm 5/8”
Stainless steel
Passage mortise latch with strike #14.73F latch case; #14.6263 strike
in polished stainless steel finish
Stainless steel escutcheon & lever handles. Depicted in satin stainless steel finish Escutcheon #14.109; Lever handles #14.999
14.109 Escutcheon plates stainless steel set 165 x 45 mm passage execution
14.999 Lever handles stainless steel 105 x 47 mm
faceplate passage mortise #14.73SW Stainless steel latch Passage mortise latch case 25 x 210 mm with solid latch bolt
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
Stainless Steel Toggle Device Spare parts (DIN 83104) Page 1-4-E Order number Material Back set Specifics Finish
Entry mortise series 14.73Z: triple latch bolt. for use with standard round corners; specify square or Profile Cylinder keyway 3/8” radius otherwise #14.73Z1 brass 55 mm Entry Lock, key way separate polished chrome plated #14.73Z2 Stainless Steel 55 mm Entry Lock, key way separate satin stainless steel #14.73Z3 Stainless Steel 55 mm Entry Lock, key way separate polished stainless steel #14.73Z4 Stainless Steel 55 mm Entry Lock, key way separate Life Time Finish Polished stainless steel Brass or Gold color
Entry mortise series 14.73Z: triple latch bolt. for use with standard round corners; specify square or profile cylinder keyway 3/8” radius otherwise #14.73SZ2 Stainless Steel 55 mm Entry Lock, key way separate satin stainless steel #14.73SZ3 Stainless Steel 55 mm Entry Lock, key way separate polished stainless steel
Thickness lock case 5 /8” or 15 mm
standard round corners; specify square or full set entry mortise lock, series 14.73Z: triple latch bolt 3/8” radius otherwise #14.73Z5 Stainless Steel 55 mm Full set satin stainless steel #14.73Z6 Stainless Steel 55 mm Full set polished stainless steel #14.73Z7 Stainless Steel 55 mm Full set Life Time Finish Polished stainless steel Brass or Gold color * Life Time Finish: Applying of a very hard coating by means of the PVD process in the colors polished gold or polished brass
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
Stainless Steel Toggle Device Spare parts (DIN 83104) Page 1-4-F Order number Material Back set Specifics Finish
Privacy mortise locks series 14.73W: with triple latch bolt standard round corners; specify square or 3/8” radius otherwise #14.73W1 brass 55 mm Mortise only polished chrome plated #14.73W2 Stainless Steel 55 mm Mortise only satin stainless steel #14.73W3 Stainless Steel 55 mm Mortise only polished stainless steel #14.73W4 Stainless Steel 55 mm Mortise only Life Time Finish Polished stainless steel Brass or Gold color
standard round corners; specify square or Privacy mortise locks series 3/8” radius otherwise 14.73W: with solid latch bolt #14.73SW2 Stainless Steel 55 mm Mortise only satin stainless steel #14.73SW3 Stainless Steel 55 mm Mortise only polished stainless steel
Thickness lock case 5 /8” or 15 mm
standard round corners; specify square or full set privacy mortise lock, series 14.73W: triple latch 3/8” radius otherwise #14.73W5 Stainless Steel 55 mm Full set satin stainless steel #14.73W6 Stainless Steel 55 mm Full set polished stainless steel #14.73W7 Stainless Steel 55 mm Full set Life Time Finish Polished stainless steel Brass or Gold color * Life Time Finish: Applying of a very hard coating by means of the PVD process in the colors polished gold or polished brass
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
Stainless Steel Mortise locks Spare parts (DIN 83104) Page 1-4-G Order number Material Back set Specifics Finish
standard round corners; specify square or Passage mortise latch series 3/8” radius otherwise 14.73F: with triple latch bolt #14.73F1 brass 55 mm Mortise only polished chrome plated #14.73F2 Stainless Steel 55 mm Mortise only satin stainless steel #14.73F3 Stainless Steel 55 mm Mortise only polished stainless steel #14.73F4 Stainless Steel 55 mm Mortise only Life Time Finish Polished stainless steel Brass or Gold color
Passage mortise latch series standard round corners; specify square or 14.73F: with triple latch bolt 3/8” radius otherwise #14.73SF2 Stainless Steel 55 mm Mortise only satin stainless steel #14.73SF3 Stainless Steel 55 mm Mortise only polished stainless steel
Thickness lock case 5 /8” or 15 mm
standard round corners; specify full set passage mortise latch; series 14.73F: triple latch square or 3/8” radius otherwise #14.73F5 Stainless Steel 55 mm Full set satin stainless steel #14.73F6 Stainless Steel 55 mm Full set polished stainless steel #14.73F7 Stainless Steel 55 mm Full set Life Time Finish Polished stainless steel Brass or Gold color * Life Time Finish: Applying of a very hard coating by means of the PVD process in the colors polished gold or polished brass
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware Stainless Steel Mortise locks Spare parts (DIN 83104) Page 1-4-H Order number Material Back set Specifics Finish
Similar to other locks from this series
Dead Bolt mortise lock series standard round corners; specify square 14.73R for Profile Cylinder or 3/8” radius otherwise #14.73R1 brass 55 mm Mortise only polished chrome plated #14.73R2 Stainless Steel 55 mm Mortise only satin stainless steel #14.73R3 Stainless Steel 55 mm Mortise only polished stainless steel #14.73R4 Stainless Steel 55 mm Mortise only Titanium coated Brass or Gold color
standard round corners; specify
Entry mortise lock series for square or 3/8” radius otherwise skeleton keys, 14.730: with triple latch bolt #14.7301 brass 55 mm Mortise only polished chrome plated #14.7302 brass 55 mm Mortise only Titanium coated Brass or Gold color
Entry mortise lock series for standard round corners; specify skeleton keys, 14.73S0: with square or 3/8” radius otherwise solid latch bolt #14.73S0 brass 55 mm Mortise only polished chrome plated #14.73S1 brass 55 mm Mortise only Titanium coated Brass or Gold color * Titanium Coating: Applying of a very hard coating by means of the PVD process in the colors polished gold or polished brass
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
Stainless Steel Mortise locks Spare parts (DIN 83104) Page 1-4-I Order number Material Back set Specifics Finish
outside inside
escutcheon plate mounting: through bolts with square female nut on outside, Philips head on inside
escutcheon plate entry model round holes square holes #14.129.266 Brass Pair; one round holes, Polished chrome one square holes #14.129.508 Stainless Steel Pair; one round holes, Satin stainless steel one square holes #14.129.508 Stainless Steel Pair; one round holes, Polished stainless steel one square holes #14.129.398 Stainless Steel Pair; one round holes, Life Time Finish Polished one square holes Brass or Gold color #14.128.508 Stainless Steel Single; round holes Satin stainless steel #14.127.508 Stainless Steel Single; square holes Satin stainless steel
outside inside
escutcheon plate mounting: through bolts with square female nut on outside, Philips head on inside
escutcheon plate entry model round holes square holes #14.119.266 Brass Pair; one round holes, Polished chrome onle square holes #14.119.508 Stainless Steel 55 mm Pair; one round holes, Satin stainless steel onle square holes #14.119.508 Stainless Steel 55 mm Pair; one round holes, Polished stainless steel onle square holes #14.119.398 Stainless Steel 55 mm Pair; one round holes, Life Time Finish Polished onle square holes Brass or Gold color #14.118.508 Stainless Steel Single; round holes Satin stainless steel With thumb-turn attached #14.117.508 Stainless Steel Single; square holes Satin stainless steel With red/green indicaor #14.117.208 Stainless Steel Single; square holes Polished stainless steel With red/green indicaor #14.117.298 Stainless Steel Single; square holes Life Time Finish Polished With red/green indicaor Brass or Gold color #14.116.508 Stainless Steel Single; square holes Satin stainless steel With slotted indicator #14.116.208 Stainless Steel Single; square holes Polished stainless steel With slotted indicator #14.116.298 Stainless Steel Single; square holes Life Time Finish Polished With slotted indicator Brass or Gold color * Life Time Finish: Applying of a very hard coating by means of the PVD process in the colors polished gold or polished brass
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware Stainless Steel Mortise locks Spare parts (DIN 83104) Page 1-4-J Order number Material Back set Specifics Finish
outside inside escutcheon plate mounting: through bolts with square female nut on escutcheon plate passage model round holes square holes outside, Philips head on inside #14.109.266 Brass Pair Polished chrome #14.109.508 Stainless Steel Pair Satin stainless steel #14.109.208 Stainless Steel Pair Polished stainless steel #14.109.398 Stainless Steel Pair Life Time Finish Polished * #14.108.508 Stainless Steel Single; round holes Satin stainless steel #14.107.508 Stainless Steel Single; square holes Satin stainless steel
Thumb turn with Through bolts, set, Stainless steel nylon insert bearing for escutcheon plates 7 x 7 mm square stock for use with Indicate size escutcheon plate drawing showing installed nylon bearing escutcheon #14.118.508 For use with escutcheons #14.1TT Thumb-turn Single, 7 x 7 mm spindle Satin chrome brass #14.139 Nylon Bearing for escutcheon each Light grey nylon #14.149 Through bolts Set, male-female , Stainless steel
lever set with stainless steel spindle
#14.999.508 stainless steel Lever handle set satin stainless steel #14.999.208 stainless steel Lever handle set polished stainless steel #14.999.298 stainless steel Lever handle set Titanium coated #14.99A.508 stainless steel Lever handle set satin stainless steel #14.99A.208 stainless steel Lever handle set polished stainless steel #14.99A.298 stainless steel Lever handle set Titanium coated
Round U shape lever drawing
lever set round U shape with stainless steel spindle #14.610.508 stainless steel Lever handle set satin stainless steel #14.610.208 stainless steel Lever handle set polished stainless steel #14.610A.508 stainless steel Lever handle extended set satin stainless steel *Titanium coating: Applying of a very hard coating by means of the PVD process in the colors polished gold or polished brass
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional Quality Hardware
Stainless Steel Mortise locks Spare parts (DIN 83104) Page 1-4-K Special Order number Material Specifics Finish
NEW
round corners
1 ½ MM
EXTRA BIG Strike plate for entry lock. THICK Mirror Polish Entry Strike Plate
NEW
round corners
1 ½ MM
EXTRA BIG Strike plate for passage lock. THICK Mirror Polish Passage Strike Plate 14.231P.508 Stainless steel Strike plate Strike plate entry lip 47.5 mm Satin stainless steel entry Bend, Cut 14.231P.308 Stainless steel Strike plate entry lip 47.5 mm Polished stainless steel 14.2310.308 Stainless steel Strike plate entry, Bend, Cut Polished stainless steel 14.2310.298 Stainless steel Strike plate entry, Bend, Cut Gold, Brass, Titanium coated 14.626P.508 Stainless steel Strike plate passage lip 47.5 mm Satin stainless steel 14.626P.308 Stainless steel Strike plate entry lip 47.5 mm Polished stainless steel 14.6260.308 Stainless steel Strike plate passage, Bend, Cut Polished stainless steel 14.6260.298 Stainless steel Strike plate passage, Bend, Cut Gold, Brass, Titanium coated
*Titanium coating: Applying of a very hard coating by means of the PVD process in the colors polished gold or polished brass
WE BEND AND CUT STRIKEPLATES ACCORDING TO YOUR SPECIFICATION
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
Stainless Steel Mortise locks Spare parts (DIN 83104) Page 1-4-K Order number Material Specifics Finish
standard is round corners; specify square or 3/8” radius
strike plate for passage lock, strike plate bend, cut otherwise strike plate for passage lock, full size strike plate for passage lock bend, cut full size corners type 2 upon request specify round corner type 3 Picture. showing mirror polished st. st. 14.626 Stainless steel Strike plate passage lip 29 mm Satin stainless steel 14.6261 Stainless steel Strike plate passage lip 29 mm Polished stainless steel 14.6262 Stainless steel Strike plate passage full size Polished stainless steel Cut and bend; lip 17 mm 14.6263 Stainless steel Strike plate passage full size Life Time Finish Polished Cut and bend; lip 17 mm Brass or Gold color
standard is round corners; specify square or 3/8” radius
strike plate for entry lock, strike plate bend, cut otherwise strike plate for entry lock, strike plate for passage lock bend, cut full size corners type 2 upon request specify round corner type 3 Picture. showing mirror polished st. st. 14.231.508 Stainless steel Strike plate entry lip 29 mm Satin stainless steel 14.231.308 Stainless steel Strike plate entry lip 29 mm Polished stainless steel 14.2311.308 Stainless steel Strike plate entry lip 17 mm Polished stainless steel Bend, cut 14.2311.298 Stainless steel Strike plate entry lip 17 mm Life Time Finish Polished Bend, cut Brass or Gold color
NEW
round corners
1 ½ MM
Mirror Polish Passage Strike Plate EXTRA BIG Strike plate for entry lock. THICK EXTRA BIG strike plate for passage lock 14.231P.508 Stainless steel Strike plate entry lip 47.5 mm Satin stainless steel 14.231P.308 Stainless steel Strike plate entry lip 47.5 mm Polished stainless steel 14.626P.508 Stainless steel Strike plate passage lip 47.5 mm Satin stainless steel 14.626P.308 Stainless steel Strike plate entry lip 47.5 mm Polished stainless steel
*Titanium coating: Applying of a very hard coating by means of the PVD process in the colors polished gold or polished brass
WE BEND AND CUT STRIKEPLATES ACCORDING TO YOUR SPECIFICATION
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
Brass Mortise Locks and Spare Parts (DIN 83104) Page 1-4-L Order number Material Backset Specifics Finish
Thickness lock case 5 /8” or 15 mm
strike plate #14.231 strike plate #14.2311 lip 29 mm; lip cut and bend to 17 mm standard is for passage locks corners type 2 round corners; specify square
or 3/8” radius Mortise Latch #14.220 corners type 3 otherwise 14.220 Brass 55 mm Latch for 9x9 mm spindle Polished Lacquered brass 14.221 Brass 55 mm Latch for 9x9 mm spindle Chrome plate brass 14.222 Brass 55 mm Latch for 9x9 mm spindle Life Time Finish Polished Brass or Gold color 14.231 Brass Strike plate passage lip 29 mm Chrome plate brass 14.2311 Brass Strike plate passage Chrome plate brass lip cut and bend 17 mm 14.2312 Brass Strike plate passage Life Time Finish Polished lip cut and bend 17 mm Brass or Gold color
standard is round corners; specify square
#14.241 strike for dead bolt #14.17Z or 3/8” radius corners type 2 otherwise deadbolt mortise lock #14.17Z 14.17Z Brass 55 mm Operates through Chrome plate brass Profile Cylinder 14.17Z1 Brass 55 mm Operates through Chrome plate brass Profile Cylinder 14.17Z2 Brass 55 mm Operates through Life Time Finish Polished Profile Cylinder Brass or Gold color 14.241 Brass Strike plate dead bolt Polished Lacquered brass 14.2411 Brass Strike plate dead bolt Chrome plate brass 14.2412 Brass Strike plate dead bolt Life Time Finish Polished Brass or Gold color *Titanium coating: Applying of a very hard coating by means of the PVD process in the colors polished gold or polished brass
#14.220 #14.17Z
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional Quality Hardware
Profile cylinders for Ships Mortise locks Page 1-4-LM Order number Material Specifics Finish
Picture Profile Cylinder key/key Series #05.488
05.488.566 Brass A= 26.5 mm B= 26.5 mm key-key; satin chrome 05.488.266 Brass A= 26.5 mm B= 26.5 mm key-key; polished chrome
30 30 Picture Profile Cylinder key/key series #05.400 35 35 40 40 45 45 50 50 UP TO 90 X 90 MM CAN BE SPECYFIED ASYMMETRIC 05.400.566 Brass A= 30 mm B= 30 mm key-key; satin chrome 05.400.266 Brass A= 30 mm B= 30 mm key-key; polished chrome 05.400.566 Brass A= 30 mm B= 30 mm key-key; satin chrome 05.400.266 Brass A= 30 mm B= 30 mm key-key; polished chrome
30 30 35 35 40 40
Picture Profile Cylinder key/knob Series #05.405 45 45 50 50 UP TO 90 X 90 MM CAN BE SPECYFIED ASYMMETRIC 05.405.566 Brass A= 26.5 mm B= 26.5 mm key-key; satin chrome 05.405.266 Brass A= 26.5 mm B= 26.5 mm key-key; polished chrome
UP TO 90 MM HalfPicture Profile Cylinder key/- 05.415.566 Brass A= 30 mm B= 0 mm key---; satin chrome 05.415.266 Brass A= 30 mm B= 0 mm key---; polished chrome 05.425.566 Brass A= 30 mm B= 0 mm knob---; satin chrome 05.425.266 Brass A= 30 mm B= 0 mm knob---; polished chrome
#05.006 #05.517 #09.P07
Key blanks
#05.008 #05.602 #05.502 #09.P05 05.105 Silver nickel Thumb-turns for Profile Cylinders; specify finish; Satin chrome of polished chrome brass
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional Quality Hardware
#44.9411.931 Steel, unfinished 93 mm Steel bushing, brass bearings Unfinished #44.9411.941 Steel, unfinished 93 mm Aluminum, nylon bearing Unfinished #44.9411.801 Steel, unfinished 80 mm Steel bushing, brass bearings Unfinished #44.9411.811 Steel, unfinished 80 mm Aluminum, nylon bearing Unfinished #44.9411.708 316 Stainless Steel 80 mm Aluminum, nylon bearing Sanded #44.9411.208 316 Stainless Steel 80 mm Aluminum, nylon bearing Polished
#44.9411.908 316 Stainless Steel 80 mm Aluminum, nylon bearing Polished Titanium Coated* series 44.9412: single sided / nut #44.9412.731 Steel, unfinished 73 mm Steel bushing, brass bearings Unfinished #44.9412.741 Steel, unfinished 73 mm Aluminum, nylon bearing Unfinished #44.9412.708 316 Stainless Steel 73 mm Aluminum, nylon bearing Sanded #44.9412.208 316 Stainless Steel 73 mm Aluminum, nylon bearing Polished #44.9412.908 316 Stainless Steel 73 mm Aluminum, nylon bearing Polished Titanium Coated* series 44.9413: single sided /blind #44.9413.731 Steel, unfinished 73 mm Steel bushing, brass bearings Unfinished #44.9413.741 Steel, unfinished 73 mm Aluminum, nylon bearing Unfinished #44.9413.708 316 Stainless Steel 73 mm Aluminum, nylon bearing Sanded #44.9413.208 316 Stainless Steel 73 mm Aluminum, nylon bearing Polished
#44.9413.908 316 Stainless Steel 73 mm Aluminum, nylon bearing Polished Titanium Coated* series 44.9414: single sided #44.9414.731 Steel, unfinished 50 mm Aluminum bushing Unfinished #44.9414.741 Steel, unfinished 73 mm Aluminum bushing Unfinished #44.9414.708 316 Stainless Steel 73 mm Aluminum bushing Sanded #44.9414.208 316 Stainless Steel 73 mm Aluminum bushing Polished
#44.9414.908 316 Stainless Steel 73 mm Aluminum bushing Polished Titanium Coated* #44.9414.208 316 Stainless Steel 73 mm Stainless steel bushing Sanded #44.9414.218 316 Stainless Steel 73 mm Stainless steel bushing Polished
#44.9414.918 316 Stainless Steel 73 mm Stainless Steel bushing Polished Titanium Coated*
Three Point Mortise Lock Page 1-4-M
High quality 3 point lock #14.086. Channel size: 22 x 10 mm. To be cut to length. Channel and latch bolt solid brass. Lock case and moving parts: steel galvanized. Backset: 50 mm. Lock case 76 mm deep; 184 mm high. PC: 85 mm. Both handed. Key action on the latch bolt. ( can be installed without levers ) Two throws on the dead bolt. 3 Deadbolts: extending 3/4 inch each in two turns of the keyway. Price custom finish $278.50
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
Brass Rim Locks - 37 mm backset NEW Page 1-5
Izerwaren
Order • Brass rim lock, backset 37 mm - 1 1/2”
Numbers • Solid brass latch bolt • Specify left or right hand and door thickness SEE PAGE 0-4 for instructions
• Strike plate or strike box NOT included • Specify strike box or strike plate • BPC polished chrome plated brass only
15.656 Entry Rim dead bolt lock with round
cylinder. For ¾” thick doors
15.837 Strike Box
15.656S Strike Plate
15.475 Entry Rim Lock with cylinder key
Case: Entry Rim Latch #15.452; Backset 1 ½’ For 8 x 8 mm spindle /door lever Strike box separate #15.837 handles Deadbolt rim lock#15.656 Strike plate separate: #15656S 15.842 Strike Box Backset 1 ½” Cylinder Key/knob 15.484S Strike Plate
15.484 Entry Rim Lock with skeleton key
Case: For 8 x 8 mm spindle /door lever handles
15.842 Strike Box
15.484S Strike Plate
15.026 Privacy Rim Lock
Case: 8 x 8 mm spindle for lever handles
15.842 Strike Box
15.484S Strike Plate
15.452 Passage Rim Lock Case: 63 mm x 166 mm x 21 mm thick 8 x 8 mm spindle for lever handles
15.837 Strike Box
15.656S Strike Plate Privacy Rim Lock #15.026 backset 1 ½”
Strike box separate #15.842
15.71Z Dead Bolt Rim Lock round cylinder Entry Rim Lock #15.475 Strike plate separate: #15484S
backset 1 ½” Cylinder Key/Knob (3271Z) 40 mm back set Case: 60 mm x 78 mm x 12 mm thick Strike box separate #15.842
15.924 (924) strike Box Strike plate separate: #15484S
05.522 Round cylinders 23 mm Ø (690) series 23 Ø x 20 / 25 / 30 mm Specify doorthickness Please Specify left or right, and inside or outside. Please see page 0-3 for chart
15.255 Rim latch for lazaret / storage doors. Model shown below: DIN Left hand Finish: Stainless steel Backset: 19 mm See also page 1-3-A
Dead bolt Rim Lock#15.71Z
Privacy Rim Lock #15.484 backset 1 ½” Strike box separate #15.842 Strike plate separate: #15484S
18.740 Lever classic, medium 75 x 50 mm
16.924 Rose, classic, 51 mm diameter
Dead bolt Rim Lock#15.71Z
Lever #18.740, rose #16.924 See page 1-10 for more trim set options
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
Brass Rim Locks - 37 mm backset NEW Page 1-5
Izerwaren
Order • Brass rim lock, backset 37 mm - 1 1/2”
Numbers • Solid brass latch bolt • Specify left or right hand and door thickness SEE PAGE 0-4 for instructions
• Strike plate or strike box NOT included • Specify strike box or strike plate • BPC polished chrome plated brass only
15.656 Entry Rim dead bolt lock with round
cylinder. For ¾” thick doors
15.837 Strike Box
15.656S Strike Plate
15.475 Entry Rim Lock with cylinder key
Case: Entry Rim Latch #15.452; Backset 1 ½’ For 8 x 8 mm spindle /door lever Strike box separate #15.837 handles Deadbolt rim lock#15.656 Strike plate separate: #15656S 15.842 Strike Box Backset 1 ½” Cylinder Key/knob 15.484S Strike Plate
15.484 Entry Rim Lock with skeleton key
Case: For 8 x 8 mm spindle /door lever handles
15.842 Strike Box
15.484S Strike Plate
15.026 Privacy Rim Lock
Case: 8 x 8 mm spindle for lever handles
15.842 Strike Box
15.484S Strike Plate
15.452 Passage Rim Lock Case: 63 mm x 166 mm x 21 mm thick 8 x 8 mm spindle for lever handles
15.837 Strike Box
15.656S Strike Plate Privacy Rim Lock #15.026 backset 1 ½”
Strike box separate #15.842
15.71Z Dead Bolt Rim Lock round cylinder Entry Rim Lock #15.475 Strike plate separate: #15484S
backset 1 ½” Cylinder Key/Knob (3271Z) 40 mm back set Case: 60 mm x 78 mm x 12 mm thick Strike box separate #15.842
15.924 (924) strike Box Strike plate separate: #15484S
05.522 Round cylinders 23 mm Ø (690) series 23 Ø x 20 / 25 / 30 mm Specify doorthickness Please Specify left or right, and inside or outside. Please see page 0-3 for chart
15.255 Rim latch for lazaret / storage doors. Model shown below: DIN Left hand Finish: Stainless steel Backset: 19 mm See also page 1-3-A
Dead bolt Rim Lock#15.71Z
Privacy Rim Lock #15.484 backset 1 ½” Strike box separate #15.842 Strike plate separate: #15484S
18.740 Lever classic, medium 75 x 50 mm
16.924 Rose, classic, 51 mm diameter
Dead bolt Rim Lock#15.71Z
Lever #18.740, rose #16.924 See page 1-10 for more trim set options
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
Brass Mortise Locks - 40 mm backset Similar to GSV #4040 series Page 1-6
Izerwaren • Mortise lock, backset 40 mm – 1 9/16” Order • Minimum door thickness 28 mm – 1 1/8” numbers • Solid latch bolt
• With square corners on lock & strike plate • Strike plate included with lock • Specify left or right hand and door thickness • Specify finish: • BPC polished chrome plated brass • BSC satin chrome plated brass • BP polished brass • LTF life time finish (PVD coated)
NEW! We offer a slimmer designed lock
with 40 mm ~ 1 3/16” backset.
#16.421 entry lock for
The case of this lock is only 0.5 inch thick!
profile cylinder key
Can be comfortably installed in
1 1/8 inch thick doors. 16.421 16.401 16.224
Entry lock with PC key Privacy lock Strike Plate
16.421 Entry Mortise Lock w. Cylinder (~4040Z) Center spindle hole to center key hole: 60 mm Case: 70 mm x 152 mm x 15/10.5 mm thick
Front plate 200 x 20 mm
For 8x8 mm spindle / door lever handles
16.224 Strike plate for entry lock
16.411 Entry mortise lock with skeleton key Center spindle hole to center key hole: 60 mm Case: 70 mm x 152 mm x 15/10.5 mm thick
Front plate 200 x 20 mm
For 8x8 mm spindle /door lever handles
#16.411 entry lock 16.224 Strike plate for entry lock skeleton key
16.401 Privacy Mortise Lock Center spindle hole to center key hole: 60 mm
Case: 70 mm x 152 mm x 15/10.5 mm thick Front of lockplate All brass parts Strike plate #16.224 Front plate 200 x 20 mm 8 x 8 mm spindle for lever handles
7 x 7 mm spindle for thumb-turn
16.224 Strike plate for privacy lock
16.431 Passage Mortise Latch Case: 70 mm x 152 mm x 15/10.5 mm thick Top view showing thickness of 12 mm 1/2 inch Front plate 200 x 20 mm
8 x 8 mm spindle for lever handles
16.225 Strike plate for latch
#16.401 Privacy lock
strike plate #16.225
05.400 Profile cylinder #1400 series Specify door thickness and function cylinder. Passage latch #16.431 case: 62 x 88 x 12 mm thick. See page 1-5 for details We custom fit Decorative Door Trim with above lock series. #16.431 Passage lock
THE MORTISE LOCKS SERIES PRESENTED ABOVE ON THIS PAGE ARE OUR MOST POPULAR SERIES.
The locks fit small design doors.
The following pages show some of the trim possibilities:
page: 1-6-1 through 1-6-4.
GSV #4040; # 4040Z; #4040F; #4040WC Ask for our specifications on the GSV series #4000 locks Privacy trim: page 1-6-0
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
Brass Trim fittings for brass locks ~ budget series Page 1-6-0
Izerwaren • Solid brass trim sets for ”40 mm backet locks Order • Minimum door thickness 25 mm - 1” numbers • Escutcheon with round corners • Door handle with nylon bearing tho • Specify left or right hand and door thickness • Specify finish:
• BPC polished chrome plated brass
• BSC satin chrome plated brass
• BP polished brass
16.30Z Entry trim set for Profile Cylinder Escutcheon plate 36x160 mm ~ 1 11/16” x 6 5/16” Door lever handle: 85 x 36 mm ` 3 3/8” x 1 11/16” Door lever handle for 8 x 8 mm spindle Distance to PC hole: 60 mm. Entry set Profile Cylinder Profile cylinder key escutcheon 16.30Z (set)
Shown OGE escutcheon #161
16.300 Entry trim set for Skeleton Key Escutcheon plate 36x160 mm ~ 1 11/16” x 6 5/16” Door lever handle: 85 x 36 mm ` 3 3/8” x 1 11/16” Door lever handle 8 x 8 mm spindle Distance to key hole: 60 mm;
16.30W Privacy trim set for thum-turn/indicator Escutcheon plate 36x160 mm ~ 1 11/16” x 6 5/16” Door lever handle: 85 x 36 mm ` 3 3/8” x 1 11/16” Door lever handle for 8 x 8 mm spindle Distance to thumb-turn hole: 60 mm.mm
Round rose#16.440M 49 mm diameter
16.30F Passage trim set #16.LIW thumb-turn/ indicator w.rose set Escutcheon plate 36x160 mm ~ 1 11/16” x 6 5/16” Rose #16.924 lever#16.740 Door lever handle: 85 x 36 mm ` 3 3/8” x 1 11/16” Door lever handle for 8 x 8 mm spindle
16.740 Door lever handle (1740) 85 x 36 mm
16.160 Escutcheon (160) 36 x 160 mm
16.161 OGE Escutcheon (161) 36 x 160 mm
05.400 Profile cylinder #1400 series see page 0-5 Specify door thickness and function cylinder. Privacy set with thumb-turn
Skeleton key escutcheon #16.300 (set) Life time finish coated brass 16.924 Round rose 51 mm ~ 2” diameter screws showing 16.012 Thumb-turn / indicator with roses
Privacy set with indicator
Shown OGE escutcheon #16.161 Privacy escutcheon 16.30W (set)
16.440 Lever Classic Large #16.440; 107 mm long 16.440W Privacy set: #16.44W; with Thumb-turn / indicator; Escutcheon #16.161 with OGE Passage set Passage escutcheon 16.30F (set)
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
Solid Brass Trim Fittings for Brass Locks Basic Trim Page 1-6-1
A BRASS TRIM SET WITH BRASS MORTISE LOCKS FOR SMALLER SCALE APPLICATIONS
budget escutcheon with budget handle OGE escutcheon with budget handle OGE escutcheon with budget handle budget escutcheon with budget handle and budget thumb-turn# 16.99M and budget indicator #16.98M and profile cylinder key / knob privacy function privacy set entry function passage function lever #16.740 escutcheon #16.160 lever #16.740 escutcheon #16.161 lever #16.740 escutcheon #16.161 lever #16.740 escutcheon #16.160
Budget lever handle Mortise lock 1 9/16” backset budget escutcheon #16.160 classic knob with budget escutcheon Budget escutcheon for entry 1/2” case thickness with Bisschop Ships lever #147; and thumb-turn#16.99M and privacy function Sizes in mm privacy function; mortise lock #16.040 budget thumb-turn; privacy function privacy function lever #16.740 escutcheon #16.160 knob# 16.087 escutcheon #16.160
; Classic lever #16.440; 107 mm long; classic roses 51 mm diameter with classic roses 51 mm diameter with budget escutcheon with Katy levers indicator #16.98M; privacy function budget handle and classic thumb-turn budget handle and classic indicator privacy function OGE escutcheon #16.161 privacy function privacy function Katy levers displayed in lever #1740 rose #15.924 Izerwaren Trim Brochure For doors from minimum 1” thick; using locks with backset 1 9/16”. Available as privacy, entry, and passage function for swinging and sliding doors. Available in polished chrome and LTF “life time finish” brass color
See page 1-6 and 1-6-0 catalog for description budget set with escutcheon
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware Brass Trim Sets for full and medium size brass locks
See Trim Brochure for details for all Architectural Hardware.
IZERWAREN.COM
Ships and Designers Hardware Mailing and shipping address: 2207 South Andrews, Fort Lauderdale, Fl 33316 web sites: www.izerwaren.com www.shipshardware.com www.gassprings.net E-mail: [email protected]
Brass Trim Sets for full and medium size brass locks Page TR-0
Lever #949008; 122 long Lever #740; 115 mm Rose#992 55 mm diameter Escutcheon #840; 235 x 37 mm PC Rose #992Z 55 mm diameter for profile cylinder PC Rose #992SK 55 mm diameter for skeleton keyway
Budget privacy trim set; Lever #16.740; 85 mm Classic lever #18.440 107 mm long; 4 ¼” Escutcheon #16.160; 36 x 160 mm Indicator #16.98M; privacy function Thumb-turn #16.012 OGE escutcheon #16.161 with indicator Escutcheon size: 160 x 36 mm 6 5/16” x 1 3/8”
SEE MORE DECORATIVE TRIM DESIGNS IN OUR DECOTARIVE TRIM BROCHURE: VISIT IZERWAREN.COM
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
Brass Mortise Locks – 40-50 mm backset Similar to GSV #4040 series Page 1-6-A
Izerwaren • Mortise lock, backset 40 mm – 1 9/16” Order • Minimum door thickness 28 mm – 1 1/8” numbers • Solid latch bolt
• With square corners on lock & strike plate • Strike plate included with lock • Specify left or right hand and door thickness • Specify finish: • BPC polished chrome plated brass • BSC satin chrome plated brass • BP polished brass
• LTF life time finish (PVD coated)
16.04Z Entry Mortise Lock for Cylinder Key(4040Z) Center spindle hole to center key hole: 60 mm Case: 70 mm x 141 mm x 14/10.5 mm thick
Front plate 200 x 20 mm
For 8x8 mm spindle / door lever handles
16.26Z Strike plate for entry lock
16.040 Entry mortise lock with skeleton key Center spindle hole to center key hole: 60 mm 4040 privacy Case: 70 mm x 152 mm x 15/10.5 mm thick Triple latch bolt Front plate 200 x 20 mm
For 8x8 mm spindle /door lever handles
16.26Z Strike plate for entry lock
16.04W Privacy Mortise Lock Center spindle hole to center key hole: 60 mm Case: 70 mm x 152 mm x 15/10.5 mm thick Front plate 200 x 20 mm 8 x 8 mm spindle for lever handles 7 x 7 mm spindle for thumb-turn
16.26Z Strike plate for privacy lock
16.04F Passage Mortise Latch Case: 70 mm x 152 mm x 15/10.5 mm thick Front plate 200 x 20 mm 4040 strike 8 x 8 mm spindle for lever handles
16.27F Strike plate for latch
4040 LOCKS SERIES
ALSO AVAILABLE WITH 50 MM BACKSET
14.69Z Entry SLIDING Mortise FOR PC (1069Z) Center spindle hole to center key hole: 60 mm Case: 70 mm x 141 mm x 14/10.5 mm thick Front plate 200 x 20 mm For 8x8 mm spindle / door lever handles
14.69S Strike plate for entry lock
14.690 Entry Sliding Mortise lock w. skeleton key Center spindle hole to center key hole: 60 mm Case: 70 mm x 152 mm x 15/10.5 mm thick Front plate 200 x 20 mm
For 8x8 mm spindle /door lever handles
14.69S Strike plate for entry lock
14.69W Privacy Sliding Mortise Lock Center spindle hole to center key hole: 60 mm
Case: 70 mm x 152 mm x 15/10.5 mm thick Front plate 200 x 20 mm 1069 privacy 8 x 8 mm spindle for lever handles SLIDING
7 x 7 mm spindle for thumb-turn
14.69S Strike plate for Privacy Lock
14.69F Passage Sliding Mortise Latch
Case: 70 mm x 152 mm x 15/10.5 mm thick
Front plate 200 x 20 mm 8 x 8 mm spindle for lever handles
14.69S Strike plate for latch strike plate #16.225
1069 strike 05.400 Profile cylinder #1400 series Specify door thickness and function cylinder. See SLIDING
page 1-5 for details
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware Brass Mortise Locks – 40-50 mm backset Similar to GSV #4040 series Page 1-6
Izerwaren • Mortise lock, backset 40 mm – 1 9/16” Order • Minimum door thickness 28 mm – 1 1/8” numbers • Solid latch bolt
• With square corners on lock & strike plate • Strike plate included with lock • Specify left or right hand and door thickness • Specify finish: • BPC polished chrome plated brass • BSC satin chrome plated brass • BP polished brass
• LTF life time finish (PVD coated)
16.04Z Entry Mortise Lock for Cylinder Key(4040Z) Center spindle hole to center key hole: 60 mm Case: 70 mm x 141 mm x 14/10.5 mm thick
Front plate 200 x 20 mm
For 8x8 mm spindle / door lever handles
16.26Z Strike plate for entry lock
16.040 Entry mortise lock with skeleton key Center spindle hole to center key hole: 60 mm 4040privacy Case: 70 mm x 152 mm x 15/10.5 mm thick Triple latch bolt Front plate 200 x 20 mm
For 8x8 mm spindle /door lever handles
16.26Z Strike plate for entry lock
16.04W Privacy Mortise Lock Center spindle hole to center key hole: 60 mm Case: 70 mm x 152 mm x 15/10.5 mm thick Front plate 200 x 20 mm 8 x 8 mm spindle for lever handles 7 x 7 mm spindle for thumb-turn
16.26Z Strike plate for privacy lock
16.04F Passage Mortise Latch Case: 70 mm x 152 mm x 15/10.5 mm thick Front plate 200 x 20 mm
8 x 8 mm spindle for lever handles
16.27F Strike plate for latch
4040 LOCKS SERIES
ALSO AVAILABLE WITH 50 MM BACKSET
1069 privacy 14.69Z Entry SLIDING Mortise FOR PC (1069Z) Center spindle hole to center key hole: 60 mm Case: 70 mm x 141 mm x 14/10.5 mm thick Front plate 200 x 20 mm
For 8x8 mm spindle / door lever handles
14.69S Strike plate for entry lock
14.690 Entry Sliding Mortise lock w. skeleton key Center spindle hole to center key hole: 60 mm Case: 70 mm x 152 mm x 15/10.5 mm thick Front plate 200 x 20 mm
For 8x8 mm spindle /door lever handles
14.69S Strike plate for entry lock 1069 strike
14.69W Privacy Sliding Mortise Lock Center spindle hole to center key hole: 60 mm Case: 70 mm x 152 mm x 15/10.5 mm thick
Front plate 200 x 20 mm 8 x 8 mm spindle for lever handles
7 x 7 mm spindle for thumb-turn
14.69S Strike plate for Privacy Lock
14.69F Passage Sliding Mortise Latch
Case: 70 mm x 152 mm x 15/10.5 mm thick
Front plate 200 x 20 mm 8 x 8 mm spindle for lever handles
14.69S Strike plate for latch strike plate #16.225 4040 strike
05.400 Profile cylinder #1400 series Specify door thickness and function cylinder. See page 1-5 for details
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware Brass Rim Locks - 30 mm backset Meets DIN #81300 standard Page 1-7
Izerwaren • Brass rim lock, backset 30 mm - 1 3/16” Order • Minimum door thickness 10 mm - 3/8” Numbers • Solid brass latch bolt • Specify left or right hand • Strike plate or strike box NOT included
• Trim not included • Specify strike box or strike plate • Specify finish:
• BPC polished chrome plated brass
• BSC satin chrome plated brass
• BP polished brass
17.928 Entry Rim Lock with bit key Center spindle hole to center key hole: 55 mm
Case: 50 mm x 104 mm x 12 mm thick
Lever set#12.968
For 7 x 7 mm spindle
See page #1-12; 1-8; Entry rim lock with bit key #17.928 17.923 Strike Box 18.90B Strike Plate
#19.90B
17.92Z Entry Rim Lock with round cylinder
Cylinder on one side only Entry rim lock with cylinder #17.92Z Center spindle hole to center key hole: 55 mm Case: 50 mm x 104 mm x 12 mm thick Pricacy #18.862 & 18.751 lever
For 7 x 7 mm spindle
Cylinder on one side only
17.923 Strike Box 18.90B Strike Plate
Special order: Cylinder on outside and
thumb-turn on inside
17.92W Privacy Rim Lock with bit key
Center spindle hole to center key hole: 55 mm
Case: 50 mm x 104 mm x 12 mm thick
For 7 x 7 mm spindle
17.923 Strike Box 18.90B
Strike Plate
Privacy rim lock #17.92W Strike box #17.923 Passage trim #18.087 #18.751 lever
17.709
Passage Rim Lock
Case: 50 mm x 70 mm x 12 mm thick
7 x 7 mm spindle
17.925 Strike box 18.91B Strike plate
17.73Z Passage rim latch #17.709 #17.925 #17.709 Dead Bolt Rim Lock with round cylinder
(3271Z)
Case: 50 mm x 78 mm x 12 mm thick
17.924 Strike box (924) 17.054 Flush Strike plate
17.690 690 series Round cylinders in heights:
23, 25, 30 mm availableØ
Brass trim fittings see page 1-8 Dead-bolt rim lock #17.73Z #17.73Z
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
Brass Mortise Locks - 30 mm backset Meets DIN #81300 standard ~ GSV # 968 series Page 1-8
Izerwaren • Mortise lock, backset 30 mm - 1 316” Order numbers • Minimum door thickness 19 mm - 3/4” • Solid latch bolt • With square corners on lock & strike plate • Strike plate included with lock
• Trim not included
• Specify left or right hand and door thickness
• Specify finish: • BPC polished chrome plated brass • BSC satin chrome plated brass • BP polished brass
GSV Lever set #12.968 Entry Lock #18.968 18.968 Entry Mortise Lock with bit key (968) Center spindle hole to center key hole: 55 mm Case: 58 mm x 96 mm x 12 mm thick
Front plate 135 x 17 mm
7x7 mm spindle
18.90B Strike plate
18.68W Privacy Mortise Lock (968WC) Center spindle hole to center key hole: 55 mm Case: 58 mm x 96 mm x 12 mm thick
Front plate 135 x 17 mm
7x7 mm spindle; 5x5 mm for thumb-turn
18.90B Strike plate
GSV Lever set #12.68W Privacy Lock #18.68W 18.68F Passage Mortise Lock (968F) Case: 80 mm x 92 mm x 16 mm thick Front plate 150 x 25 mm 7x7 mm spindle for lever handles
18.91B Strike plate
GSV trim fittings series#5968; 7x7 mm spindle
Lever handles with Esc. Plates
attached Lever handle: 80 x 35 mm 12.968 Entry with skeleton key
12.68Z Entry with round cylinder
12.68W Privacy
12.68F Passage GSV Lever set #12.68F Privacy Lock #18.68F
18.002 Lever handles with plate “Katy”, set
Lever handle 60 x 37 mm;
Escutcheon plate 63 x 27 x 7 mm
18.001 :Lever handles with plate “Linz”, set
Lever handle 60 x 37 mm;
Escutcheon plate 63 x 27 x 7 mm
#16.087 Knob Classic with plate classic
18.101 Knob with plate “Linz”50 x 23 mm
Lever “Katy” Lever “Linz” Knob “Classic” Knob “Linz” stands off 44 mm; with plate 68 x 27 x 7 mm #18.002 #18.001 #16.087 #18.101
Classic Trim fittings (see also page 1-11)
18.861 Long. Escutcheon plates 186101 134x25x2mm
18.860 Short Escutcheon plate, 66 x 25 mm
18.087 Escutcheon rose, oval 88 x 36 mm
18.751 Lever handle Classic small 70 x 36 mm
18.740 Lever handle Classic medium 88 x 36 mm
#18.861 #18.862 #18.863 #18.751 #18.893 #18.470 Lever handle classic, Lever handle classic small #18.751 + #18.087 medium#18.470 + 18.893
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
Solid Brass Trim Fittings for Brass Locks Page 1-8-1
PASSAGE SET “CLASSIC” THUMB-TURN “CLASSIC”1”X2 5/8 PRIVACY SET “CLASSIC” POLISHED CHROME LEVER HANDLE WITH POLISHED CHROME POLISHED CHROME LEVER HANDLE WITH SHORT ESCUTCHEON ESCUTCHEON WITH ROSE SIZE LEVER HANDLE: 1 7 /16”X 2 3/4” #16.087+#18.087 AND THUMB-TURN WITH ROSE SIZE ESCUTCHEON: 1” X 2 5/8” SIZE LEVER HANDLE: 1 7 /16”X 2 3/4” LEVER #18.751+ESCUTCHEON #18.087 SEMI FLUSH THUMB-TURN WITH SIZE ESCUTCHEON: 1” X 5 1/8” WITH LOCK 18.68F ROUND ROSE #16.012 _ 16.924 THUMB-TURN: 5/8” X 11/16” Ø
#18.751 #18.861 #18.863W #18.863F #16.087 #18.861 #18.863w Lever Handle “Classic”: Escutcheons: 1” x 5 1/8” Thumb-turn: 1 3/16” x 1 13/16” Bit key escutcheon Privacy escutcheon A=1 7/16” B=2 3/4” with Escutcheon: 1” x 2 5/8”
# 18.968 #18.68W #18.68F #18.68Z Mortise lock Privacy Lock Passage latch Entry lock, round cylinder/thumb-turn
VERY SUITABLE FOR 7/8” to 1” THICK WOODEN DOORS, USING LOCKS WITH BACKSET 30 MM 1 3/16”
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware Stainless Steel Narrow Backset Mortise Locks - 25 mm backset Page 1-9-1
Izerwaren • Mortise lock backset 25 mm – 1” Order • Heavy duty numbers • Minimum door thickness 1 ¼” • Minimum door style width: 1 5/8” • Lock front plate case and parts 304 stainless steel • Strike plate included
• Lock plate has square corners • Both handed (latch-bolt reversible)
• finish: Satin stainless steel or
Polished stainless steel
WELL SUITED FOR NARROW
STYLE ALUMINUM DOORS
WITH GLASS PANELS
19.82Z Entry Mortise Lock (6182Z) Backset 25 mm Center spindle to center key-hole: 78 mm (PC=78 mm) Case: 40 mm x 180 mm x 17 mm thick Front plate 250 x 22 mm For 8x8 mm spindle / door lever handles Material: 304 stainless steel #19.82Z for lock case and lock plate. Bolts Narrow backset mortise entry lock
lock case: 1 9/16 x 7 1/8” x 3/4” thick are nickel plated brass; bronze springs.
lock plate: 7/8” x 9 7/8”
#12.021 Special cropped stainless steel lever handle 19.83Z with oval roses #12.507 Entry Mortise Lock (6183Z) Profile cylinder #05.400 with over roses #12.517 Backset 50 mm Center spindle to center key-hole: 78 A=Backset 25 mm mm (PC=78 mm) Case: 65 mm x 180 mm x 17 mm thick A=Backset 50 mm Front plate 250 x 22 mm For 8x8 mm spindle / door lever handles Material: 304 stainless steel for lock case and lock plate. Bolts are nickel plated brass springs are bronze.
MATCHING SET DOOR HANDLES AND OVAL ROSES
Lever #12.021 Oval rose #12.507
12.507 Oval Rose for lever 66.5 x 29.5 mm
12.517 Oval Rose for Profile Cylinder
66.5 mm x 29.5 mm Material: 304 stainless steel #19.82Z 25 mm backset #19.83Z 50 mm backset 12.021 Door lever handle 148 x 65 mm Material: 304 stainless steel
12.416 Escutcheon 66.5 mm x 29.5 mm Material: 304 stainless steel
Available as Passage Privacy or
Entry Functions available through Profile Cylinder set up Profile cylinder not included with lock
05.405 Profile cylinder #1400 series Specify door thickness and function cylinder. See page 0-5
For more applications, escutcheon #12.416 Lever #12.021 see page 1-2 escutcheon: 220 x 36 mm (8 5/8 inch x 1 3/8 inch) © IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware Classic Brass Trim Sets for Brass Locks for small and Medium Size Doors Page 1-10
Izerwaren Order • Classic brass trim fittings for brass locks numbers • BPC polished chrome plated brass
• BSC satin chrome plated brass
• BP polished brass
18.751 Lever handles, Classic, small 70 x 36 mm,
7x7 mm spindle
18.087 Esc. plates w. round corners 134 x 25 mm For small lock series on page: 1-7,8.
lever handle classic, small #18.751 + #18.087 18.740 Lever handles, Classic, medium 88 x 36 mm
18.933 Escutcheon rose, Classic, oval 88 x 36 mm
For medium and small door handles and lock series on page: 1-5, 6, 7, 8.
Lever classic medium#18.740, rose #16.924
lever handle classic, medium, with oval escutcheon #18.740 + 18.893 Lever handles, Classic, large 107 x 42 mm 18.956 Escutcheon rose, Classic, oval 82 x 38 mm 18.931 For large classic door handles and lock series on
page so series on page: 1-3, 4, 5, 6.
51 mm Ø Rose , Classic,
16.924
51 mm Ø Escutcheon rose for profile cylinder 16.020
Thumb-turn / indicator w. roses, set 16.01W (see below)
lever handle classic, big #18.956 + oval escutcheon #18.931
#16.011 + #16.012
Privacy Indicator #16.011 Thumb-turn #16.012 Rose #16.924
#18.001 #18.101 18.001 Linz Lever 60 mm, Linz knob 50 mm 18.101 with oval rose
Escutcheon Plates Classic BIg, Oval
15.850 178 x 33 mm;
escutcheon plate classic big oval
Passage model#15.850 Entry model #15.853 Key#15.852 46 L x 20 W x 33 H mm Knob oval
16.088 with round rose 51 mm Ø
Knob with oval rose 66 x 25 mm
16.087
#16.088 Knob oval, round rose. #16.087 Knob oval, rose oval Egg Knob 40 x 25 mm with oval rose 38 x 27 mm 35.218 40 x 25 mm with 41mm Egg Knob round rose 35.A22
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware Brass Trim Sets for full and medium size brass locks Page 1-11
Izerwaren • Brass trim fittings for locks with 55 mm Order (2 3/16”) and 40 mm (1 9/16”) backset Numbers • Polished chrome plated brass • Satin chrome plated brass • Life Time Finish brass or gold • Some finishes limited available
Brass Ferraro trim fittings. All brass #15.F83 50x116 mm “Sable Block” 25083 #15.F84 58x115 mm “Half Sable” #25084 roses fasten through the lock with through- bolts. Sturdy fastening, screws invisible. Many designs lever handles and escutcheon plates available. Samples available. Please ask for our Ferraro Color Brochure
15.F83Lever handle Ferraro ”Sable-Block” 50 x 116 mm 15.F84Lever handle Ferraro ”Half-Sable” #16.F10 51x128 mm “U” profile #23110 #19.F05 50x123 mm ‘Banana” #23105 58 x 115 mm 16.F10Lever handle Ferraro ”U” profile 51 x 128 mm 19.F05Lever handle Ferraro ”Banana”profile 50 x 123 mm 15.F80Roses heavy, brass, screws invisible, 50 mm Ø
15.F75Escutcheon Rose, for profile cyl., 50 mm Ø 09.P005Thumb-turn #15.F75 #15.F80 #09.P00 #09.P005 09.P00Indicator;
Brass Jado trim fittings for ship locks. In Diamond finish, brass lacquered or polished chrome plated brass Many designs lever handles and escutcheon plates available. Samples and color sheets available
14.J33Lever handle Jado #933; 115 mm
14.J92Escutcheon Plate Jado ”#983; available in entry set, privacy set and passage set Dimensions: 220 x 45 mm
13.J91Thumb-turn Jado 13.J92Indicator Jado
Brass Valenti fittings for ship locks.
Brass lacquered, gold plated, chrome plated brass, in two tone satin and polished finish
Many designs lever handles and
escutcheons available. Samples and color Lever #933; 114 mm; Escutcheon 983; 220 x 45mm Thumb-turn / indicator sheets available
20.V60Lever handles #501 with round roses brass, screws invisible, 50 mm Ø
20.V50Rose #50 Valenti 50 mm Ø 20.V58Rose #58 Valenti Profile Cylinder 50 mm
20.V7AThumb-turn #7157 Valenti
20.V7BIndicator #7157 Valenti
Lever handle #501 with rose #50 Profile cylinder rose #58 Thumb-turn 7517a/b
ALSO ASK FOR OUR: FULL CATALOG OF LEVER HANDLES, ROSES OR ESCUTCHEONS OF ALL MAJOR
BRANDS: ASK OUR OFFICE FOR: “IZERWAREN TRIM BROCHURE” OR VISIT: IZERWAREN.COM
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
Stainless steel and Brass GSV door lever handles and escutcheons Page 1-12
Izerwaren • Brass GSV trim for locks” Order • Specify left or right hand and door thickness numbers
• Specify finish:
00000000000000000000
• BPC polished chrome plated brass
• BSC satin chrome plated brass
• BP polished brass
GSV trim fittings #5968 escutcheon: 30 x 130 mm
Lever handles with Esc. Plates attached Lever handle: 80 x 35 mm 12.968 Entry with skeleton key C =55 mm #12.968 #12.68W #12.68Z also as: #12.68F
12.68Z Entry with round cylinder PZ=56 mm w. skeleton key; w. thumb-turn w. round cylinder
12.68W Privacy with thumb-turn + indicator
12.68F Passage
For mortise locks with a center spindle hole to center key hole of 55 mm (#1048) (#968) For locks see page 1-7 and 1-8.
GSV trim fittings #5969; 8x8 mm spindle
Lever handles with Esc. Plates
attached Lever handles 100 x 42 mm;
Escutcheon plates 70 x 30 mm
12.59Z Entry for profile cylinder
12.596 Entry with bit key
12.59W Privacy 000
12.59F Passage
For mortise locks, swinging and pocket door mortise locks with a center spindle hole to center key hole of 60 mm (#1048, #969 and #4040) see page 1-5, 1-6 & 1-14
GSV flush trim fittings #4969; 8x8 mm
Flush handles with Esc. Plates attached Flush handle: 50 x 8 mm; Escutcheon plates 65 x 45 mm
0 12.49Z Entry for profile cylinder
12.496 Entry with bit key
12.49W Privacy
12.49F Passage
For pocket door mortise locks, locks with a center spindle hole to center key hole of 60 mm (#1048,
#969) see page 1-5, 6 & 14
304 STAINLESS STEEL:
GSV trim fittings
14.410 Lever handles 105 x 47 mm (4410) Brass
14.210 105 x 47 mm Lever handles (2210) Stainless st.
14.610 105 x 47 mm Lever handles (6610) Stainless st.
14.64Z Escutcheon plates 165 x 45 mm (6645Z)
14.304 Escutcheon rose 50 mm Ø (3304)
14.60Z Escn. Cylinder Rose 50 mm Ø (3604Z) Escn.
14.604 Rose for bit key 50 mm Ø (3604)
14.40W Thumb-turn/indicator with rose (4405)
Use with : Full size locks with a center spindle hole to center key hole: 60 or 75 mm. Backset 40 or 55 mm. See page 1-4, 1-4-1, 1-6, 1-14 Escutcheon plates #6645Z Lever handles #6610 and #2210 (right) (Lock series #3000 series, #4040 series and #1048)
#4410 #3304 #3604Z #3604 #4405 / set for use with Profile Cylinder: see page 1-5
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
Brass Sliding Door Locks - 55 mm backset Meets DIN #81300 standard ~ GSV # 3000 series Page 1-13
• Mortise lock, backset 55 mm - 2 316” Izerwaren Order • Minimum door thickness using protruding door numbers lever handles: 32 mm - 1 1/4”
• Pocket doors: Minimum door thickness using flush escutcheon plates on both sides: 32 mm / 1 1/4” when using a bit key lock, privacy or passage lock • When using a Profile cylinder Entry lock: - 44 mm / 1 3/4”
• Solid brass hook bolt • Round corners on lock plate
• Stainless steel strike plate included • Specify finish:
• BPC polished chrome plated brass
• BSC satin chrome plated brass
• BP polished brass
(3381Z) Entry Sliding Door Mortise Lock 13.81Z Center spindle hole to center key hole: 75 mm
Case: 80 mm x 152 mm x 16 mm thick Front plate 210 x 25 mm Entry Lock #3381Z Strike: #13.81S For 9x9 mm spindle /door lever handles
Use with profile cylinder key/key or knob/key
(3381) Strike plate 13.81S
(1405) Profile Cylinder key/key or knob/key 05.406 see page 0-5
(3381WC) Privacy Sliding Mortise Lock 13.81W Center spindle hole to center hole: 75 mm Case: 80 mm x 152 mm x 16 mm thick
Front plate 210 x 25 mm
9 x 9 mm spindle for lever handles 7 x 7 mm spindle for thumb-turn
13.81S (3381) Strike plate
(3381F) Passage Sliding Mortise Lock 13.81F
Case: 80 mm x 152 mm x 16 mm thick
Front plate 210 x 25 mm
9x9 mm spindle for lever handles
13.81S (3381) Strike plate
(3381K)Bit Key Sliding Mortise Lock 13.81K Privacy lock 3381WC Escutcheon plates #6645Z Lever handles #2210
Center spindle hole to center key hole: 75 mm
Case: 80 mm x 152 mm x 16 mm thick
Front plate 210 x 25 mm
Works with Bit key
(3381) Strike plate 13.81S
#13.81K edge pull #13.219 edge bolt #13.229 skeleton key sliding door lock stainless steel; for size see page: 1-13-3
#52.186 #52.191 #52.194 #52.192 for sizes see page 5-2
Lock #13.81F with flush plate #52.194 For brass and stainless steel trim fittings see page 1-4; 1-11, 1-12, 5-2
\ © IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
13.330
Or this one
13.330K Steel Sliding Door Locks - 50 mm (2”) backset and 30 mm (1 3/16”) backset Page 1-13-1
Izerwaren Sliding door or pocket door lock, Order steel casing with brass front plate and FOR 1 ½” THICK DOORS; 2” BACKSET. INTERIOR GRADE numbers brass bolt
• Mortise lock, backset 50 mm – 2” or 30 mm backset 1 3/16”; strike included • Pocket doors: Minimum door thickness using flush escutcheon plates on both
sides: 39 mm ~ 1 1/2”.
• Solid brass hook bolt
• Round corners on brass lock plate •
• Finish: polished chrome plated or
polished brass lacquered/
13.T15W Privacy Sliding Mortise Lock Set Backset 50 mm; Case: 100 x 67.5 mm
Front plate 160 x 16 mm #13.T15W; Privacy sliding door lock set. (flush lever / indicator)
Flush lever: 57 mm diameter. (2 ¼”) #13.T15F; Passage sliding door lock set. (flush levers on both sides) Lever Protrudes 5/16”
13.T15F Passage Sliding Mortise Lock Set As above, but with flush levers on both
sides.
13.T15S Entry Sliding Mortise Lock
Backset 50 mm; Case: 100 x 67.5 mm Front plate 160 x 16 mm
Key rose: 38 x 152 mm (1 ½ x 6”)
13.T14W Privacy Sliding Door Mortise Lock Backset 50 mm; Case: 100 x 67.5 mm
Front plate 160 x 16 mm
Flush lever: 57 mm diameter. (2 ¼”)
13.T14F Passage Sliding Mortise Lock Set #13.T15S; Entry sliding door lock set. (by means of skeleton key on both sides) As above, with flush levers on both sides.
13.T18W Privacy Sliding Door Mortise Lock Backset 50 mm; Case: 100 x 67.5 mm
Front plate 160 x 16 mm
Outside: Flush lever on plate: 38x152mm inside: indicator on plate
13.T18F Passage Sliding Mortise Lock Set
As above, with flush levers on both sides.
#13.T14W; Privacy sliding door lock set. (flush lever / indicator)
#13.T14F; Passage sliding door lock set. (flush levers on both sides)
13.T16 Flush ring lever on plate
57 mm diameter. (2 ¼”)
13.T32 Small Flush ring lever on plate 32 mm diameter. (1 ¼”)
Door Edge Pull s:
#13.T18W; Privacy sliding door lock set. (flush lever / indicator on oval plate)
#13.T18F; Passage sliding door lock set. (flush levers on both sides on oval plate) 13.209 13.219 13.229 13.239
#13.209; 13.219; 13.229; 13.239
13.306 Sliding mortise lock only #13.T16; Flush ring lever and flush indicator; 57 mm diameter (2 1/4”) (passage/privacy fuction) 50 mm (2”) backset Strike plate included. lock case 12 mm thick. Face plate 16 x 160 mm
Sliding mortise lock only (passage/privacy function) Backset: 30 mm (1 3/16”) #13.T32; Small Flush ring lever with small indicator 32 mm diameter (1 1/4”)
13.330
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
Flush Levers and Flush Pulls Page 1-13-2
Izerwaren Flush levers in brass, aluminum or Order stainless steel. No mechanism included numbers • • Finish: polished chrome plated;
• olished brass lacquered;
• Satin stainless steel;
• Mirror Polished stainless steel
• Aluminum anodized
13.T25 Flush rose with indicator
57 mm or 2 ¼” diameter
for use with spindle
#13.T26; Flush rose with indicator, 2 ¼” diameter
13.T26 Flush rose with folding lever #13.T25; Flush rose with folding lever, 2 ¼”diameter, folded lever protrudes 5/16” Flush lever: 57 mm diameter. (2 ¼”)
Lever Protrudes 5/16”
13.T35 Flush oblong pull/rose with indicator
Flush lever: 57 mm diameter. (2 ¼”) Lever Protrudes 5/16”
Rose: 152 x 38 mm 6” x 1 ½”
13.T36 Flush oblong pull/rose with folding lever Flush lever: 57 mm diameter(2 ¼”)
Lever Protrudes 5/16”,
Rose: 152 x 38 mm 6” x 1 ½”
13.T37 Flush oblong pull only
13.T38 Flush oblong pull with keyhole 1 #13.T35; flush pull/rose with folding lever #13.T37 #13.T38
#13.T36; Flush pull/rose with indicator pull only pull with keyhole
13.T45 Flush rose with flush lever
Flush rose: 57 mm diameter. (2 ¼”)
#13.T26; Flush rose with indicator, 2 ¼” diameter #13.T45; Flush rose with flush lever, 2 ¼”diameter
13.T55 Flush rose with flush ring lever
Flush rose: 57 mm diameter. (2 ¼”)
Ring Lever Protrudes 1/4”
#13.T55; Flush ring lever; 57 mm diameter (2 1/4”) Protrudes ” or 5.5 mm ¼
13.T65
Flush rose with flush ring lever small
(1 ”) Flush rose: 32 mm diameter. ¼
Ring Lever Protrudes 1/4”
13.T66 Flush rose with indicator small
Flush rose: 32 mm diameter. (1 ¼”)
#13.T65; Small Flush ring lever, 32 mm diameter (1 1/4”) Protrudes ¼” or 5.5 mm
#13.T66; Small Flush rose with indicator, 32 mm diameter (1 1/4”)
51.013 Flush ring lever on square plate Solid brass, for 8 x 8 mm spindle 70 mm x 70 mm, depth: 16 mm
protrudes: 2 mm or 1/16”
#51.013 Flush lever, 70 x 70 mm; build in depth: 5/8”; in brass or aluminum
51.016 Flush ring lever on square plate 304 Stainless Steel 90 mm x 90 mm, depth: 13 mm built in depth to lock case: 17 mm up-lay: 2 mm Finish: satin or polished stainless steel For use with 8 x 8 mm square spindle
See also pages: 5-1, 5-2, 5-3 #51.016 Flush lever, 90 x 90 mm; build in: 5/8”; in stainless steel
\ © IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware Pocket Sliding Door Lock series #8500 1.5 inch backset Page 1-13-3
POCKET SLIDING DOOR LOCK #8580
Pocket sliding door lock #13.8580 with privacy function; with flush pull lever. Backset: 1.5 inch. Reversible. Left: Strike pin. Right: Mechanism with flush cups and flush levers For Medium Weight Doors. Other functions below
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware Stainless Steel Pocket Door Lock Set– for 1 ¼” thick doors Page 1-13-4
Izerwaren • Mortise lock, backset 26 mm – 1”; FOR 1 1/4” THICK DOORS; 1” BACKSET. EXTERIOR GRADE Order strike included numbers • Pocket doors: Minimum door thickness using flush escutcheon plates on both
sides: 32 mm ~ 1 1/4”. • Set with two levers: passage set • Set with lever and indicator: privacy set • • Finish: polished chrome plated or polished brass lacquered;
• mechanism stainless steel
13.T32 Small Flush ring lever on plate, flush
(1 ¼”) 32 mm diameter.
13.T321 Small indicator on plate, flush
32 mm diameter. (1 ¼”)
13.C56 Sliding door latch mechanism Spring loaded bolt Stainless steel Strike included
Shown: Pocket door latch set with Privacy function.
13.209 #13.209; door edge pull,25 mm diam., built in depth 25 mm material: brass
13.219 #13.219; 110 x 24 mm round corners; built in depth 30 mm; stainless steel
#13.T32; Small Flush ring lever with small indicator 32 mm diameter (1 1/4”)
13.249 #13.249; 100 x 20 mm; built in depth 23 mm; stainless steel
13.239 #13.239; 91 x 22 mm; built in depth 35 mm; stainless steel
#13.C56, stainless steel latch mechanism with hook bolt and strike Backset: 26 mm. Faceplate: 80 x 20 mm Lock case: 50 x 42 mm
Strike plate: 50 x 18 mm; brass chrome plated 13.128 #13.128; 100 x 16 mm; built in depth 32 mm; brass
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
Brass Mortise Locks – 40-50 mm backset Similar to GSV #4040 series Page 1-6-A
Izerwaren • Mortise lock, backset 40 mm – 1 9/16” Order • Minimum door thickness 28 mm – 1 1/8” numbers • Solid latch bolt
• With square corners on lock & strike plate • Strike plate included with lock • Specify left or right hand and door thickness • Specify finish: • BPC polished chrome plated brass • BSC satin chrome plated brass • BP polished brass
• LTF life time finish (PVD coated)
16.04Z Entry Mortise Lock for Cylinder Key(4040Z) Center spindle hole to center key hole: 60 mm Case: 70 mm x 141 mm x 14/10.5 mm thick
Front plate 200 x 20 mm
For 8x8 mm spindle / door lever handles
16.26Z Strike plate for entry lock
16.040 Entry mortise lock with skeleton key Center spindle hole to center key hole: 60 mm 4040 privacy Case: 70 mm x 152 mm x 15/10.5 mm thick Triple latch bolt Front plate 200 x 20 mm
For 8x8 mm spindle /door lever handles
16.26Z Strike plate for entry lock
16.04W Privacy Mortise Lock Center spindle hole to center key hole: 60 mm Case: 70 mm x 152 mm x 15/10.5 mm thick Front plate 200 x 20 mm 8 x 8 mm spindle for lever handles 7 x 7 mm spindle for thumb-turn
16.26Z Strike plate for privacy lock
16.04F Passage Mortise Latch Case: 70 mm x 152 mm x 15/10.5 mm thick Front plate 200 x 20 mm 4040 strike 8 x 8 mm spindle for lever handles
16.27F Strike plate for latch
4040 LOCKS SERIES
ALSO AVAILABLE WITH 50 MM BACKSET
14.69Z Entry SLIDING Mortise FOR PC (1069Z) Center spindle hole to center key hole: 60 mm Case: 70 mm x 141 mm x 14/10.5 mm thick Front plate 200 x 20 mm
For 8x8 mm spindle / door lever handles
14.69S Strike plate for entry lock
14.690 Entry Sliding Mortise lock w. skeleton key Center spindle hole to center key hole: 60 mm Case: 70 mm x 152 mm x 15/10.5 mm thick Front plate 200 x 20 mm
For 8x8 mm spindle /door lever handles
14.69S Strike plate for entry lock
14.69W Privacy Sliding Mortise Lock Center spindle hole to center key hole: 60 mm
Case: 70 mm x 152 mm x 15/10.5 mm thick Front plate 200 x 20 mm 1069 privacy 8 x 8 mm spindle for lever handles SLIDING
7 x 7 mm spindle for thumb-turn
14.69S Strike plate for Privacy Lock
14.69F Passage Sliding Mortise Latch
Case: 70 mm x 152 mm x 15/10.5 mm thick
Front plate 200 x 20 mm 8 x 8 mm spindle for lever handles
14.69S Strike plate for latch strike plate #16.225
1069 strike 05.400 Profile cylinder #1400 series Specify door thickness and function cylinder. See SLIDING
page 1-5 for details
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware Stainless steel Sliding Mortise Lock - 65 mm backset Meets all fire codes Page 1-13-A
Izerwaren • Mortise lock, backset 65 mm - Order numbers • Pocket doors: Minimum door thickness using flush escutcheon plates on both sides: 44 mm / 1 3/4”
• Stainless steel hook bolt • Round corners on lock plate • Stainless steel strike plate separate • Specify finish:
• Satin stainless steel
• polished stainless steel
13.270 Entry Sliding Door Mortise Lock
Extra heavy duty Lockcase: 98 mm x 162 mm x 16 mm thick Backset 65 mm Front plate 235 x 24 mm PC= 72 mm
For 9x9 mm spindle /door lever handles
316 stainless steel Locking: Use with profile cylinder key/key or knob/key; see page 0-5
13.275 Strike plate Heavy duty Entry Lock #13.270 Strike #13.275
Profile Cylinder key/key or knob/key see page 0-5 for details
13.271 Privacy Sliding Mortise Lock
Extra heavy duty Lockcase: 98 mm x 162 mm x 16 mm thick Backset 65 mm Front plate 235 x 24 mm WC= 72 mm
For 9x9 mm spindle /door lever handles 7 x 7 mm spindle for thumb-turn
13.275 Strike plate
13.272 Passage Sliding Mortise Lock
Extra heavy duty
Lockcase: 98 mm x 162 mm x 16 mm thick Backset 65 mm Front plate 235 x 24 mm For 9x9 mm spindle /door lever handles
13.275 Strike plate
For profile cylinder specifics: see page 0-5
#53.949 flush lever on plate Escutcheon #12.222 available in stainless steel Lever #12.527 and anodized aluminum Stainless steel See page 5-3-1 for details See page 1-1-2 for details
\ © IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware Brass Sliding Mortise Lock - 55 mm backset Meets all fire codes Page 1-13-B
Izerwaren • Mortise lock, backset 55 mm - Order numbers • Brass hook bolt • Round corners on lock plate • Brass strike plate separate • Standardy finish:
• polished chrome plated brass
13.008 Sliding Door Mortise Lock heavy duty For Use with profile cylinder Lock case: 85 mm x 167 mm x 16 mm thick Backset 55 mm Front plate 232 x 25 mm PC= 90 mm For 9x9 mm spindle /door lever handles Solid brass Locking: Use with profile cylinder key/key or knob/key; see page 0-5
13.011 Sliding Door Mortise Lock heavy duty For Use with skeleton key
Similar dimensions as above
13.009 Sliding Door Mortise Lock heavy duty For use as privacy lock with thumb- Sliding Entry Lock #13.011 Sliding Entry Lock #13.008
turn Skeleton Key function Profile cylinder Key Function
Similar dimensions as above
13.010 Sliding Door Mortise Lock heavy duty
For use as passage lock Similar dimensions as above
13.830 Strike box 28 x 145 x 15 mm
To be mortised in flush
Profile Cylinder key/key or knob/key see page 0-5 for order numbers and sizes
Strike box #13.830
13.969 #13.969 Flush Trim set #12.537 lever #12.53F Semi flush lever Escutcheon #12.416 Chrome Plated Brass #12.222 Escutcheon #12.222 Escutcheon stainless steel stainless steel stainless steel
\ © IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
Pocket Sliding Door Lock Series #2002 Page 1-13-D
Pocket door locks for door thickness 1 3/8” and up. Backset from 2 1/2 to 6 inches.
Edge pull with flush pull Passage latch with flush pull Entry/Privacy lock with flush pull Edge pull #13.200 flush pull #13.002B Latch #13.001 Flush Pull#13.002T Lock #13.002 Flush Pull #13.A002C Backset: not applicable Backset: 2 ½, 2 ¾, 3 ¾, 5, 6 inch Backset: 2 ½, 2 ¾, 3 ¾, 5, 6 inch
Edge pull, spring loaded#13.200 Passage latch #13.001 Entry/privacy lock #13.002
Edge pull #13.200 Passage latch #13.001 Entry/privacy lock #13.002
See page 1-13-E for Flush Pull Designs for these locks
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
Flush Levers For Pocket Sliding Door Lock Series #2002 Page 1-13-E
Pocket door locks for door thickness 1 3/8” and up
#13.CSB #13.CSOI #13.CSC #13.CSE #13.CST Flush pull 7 x 2 ¼ inch Occupied/vacant Round cylinder indicator Thumb-turn engraved
Pocket Door Lock #13.002 Flush plate #13.COE Privacy Pocket door lock set illustrated
#13.CNE #13.CNC #13.CNE #13.CNT #13.CNOI
Flush pull 7 x 2 ¼ inch Passage Round Cylinder Indicator Thumb-turn Occupied/Vacant engraved Pocket Door Lock #13.002
#13.COT #13.COB #13.COC #13.COE #13.COT #13.CAC #13.CAB #13.CAC #13.CAE 13.CAT Flush pull 7 x 2 ¼” Passage Cylinder Indicator Thumb-turn Flush pull 7 x 2 ¼” Passage Cylinder Indicator Thumb-turn
#13.SBB #13.SBB #13.SBC #13.SBE #13.SBT #13.RCB #13.RCB #13.RCC #13.RCE 13.RCT Flush pull 2 x 2 inch Passage Cylinder Indicator Thumb-turn Flush pull 7 x 2 ¼” Passage Cylinder Indicator Thumb-turn
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
Flush Levers For Pocket Sliding Door Lock Series #160 and 161 Page 1-13-F
Pocket door locks for door thickness 1 3/8” and up
#13.FE2348T #13.FE2348B #13.2348C 13.FE2348T #13.FE2348E Size: Outside: 2 13/16“ x 2 1/4" x 11/32“ Hole: 2 1/16“ x 2 1/16” A= 11/32”
Trim set Flush square plate #13.SBT Mechanism+ edge pull #13.002 Satin nickel
#13.R161T #13.R161B (pair) #13.R161T #13.R161E Size: Outside: 2 3/8“ diameter. Drill Hole: 2 1/8“
Trim set Flush Round plate #13.161E Mechanism+ edge pull #13.002 Satin nickel #13.S161T #13.S161B (pair) #13.S161T #13.S161E Size: Outside: 3 1/4” x 2 3/8“. Drill Hole: 2 1/8“
Trim set Flush Round plate #13.161E Mechanism #13.161PDL Satin brass
Hook Mechanism for pocket doors #13.161PDL Specify backset: 2 3/4" or 2 3/8” Specify finish.
Trim set Flush Round plate #13.161T Mechanism #13.161PDL Satin brass
Edge pull Mechanism for pocket doors #13.161PDP Case: 1” diameter; Pull 5/8” diameter; spring loaded. Specify finish.
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
Flush Levers For Pocket Sliding Door Lock Series 7346 and 7200 Page 1-13-G
Pocket door locks for door thickness 1 3/8” and up
Pocket door Lock #13.161PDL Details see page #1-13-F
13.FE9006E 13.FE9006T 13.FC7346E 13.7346T Dimension Outside: 7 ¾ x 2 1/4" x 11/16” Build in dimension: 7 1/2" x 2”
Pocket door lock #13.001 Details see page #1-13-D
Pocket Door Lock #13.306 #13.72ADA thumb-turn #13.7200ER-indicator/emergency 2” backset
#13.7205 Set Privacy deadlock #13.72ADA thumb-turn #13.7200ER Dead Bolt Lock #13.7200 2 1/2" or 2 3/4" backset Please specify
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware Sliding Door Locks - 40 mm backset Meets DIN #81300 standard Page 1-14
Izerwaren • Brass Mortise Sliding lock, backset 40 mm - 1 9/16” Order • Minimum door thickness 23 mm - 7/8” numbers • Pocket doors: Minimum door thickness using flush
escutcheon plates on both sides: 25 mm / 1” • Solid brass hook bolt; Strike plate included with lock
• With square corners on lock & strike plate • Specify finish:
• BPC polished chrome plated brass
• BSC satin chrome plated brass
• BP polished brass
14.481
Entry Sliding Mortise Lock, Brass, Light Duty
for use with profile cylinder (1049)
Center spindle hole to center key hole: 60 mm
Case: 62 mm x 140 mm x 12 mm thick #14.481
Front plate 180 x 17 mm
8x8 mm spindle / door lever handles #14.491 16.3SZ see page 1-6-1 Entry SET COMPLETE with Budget Trim
14.491 Entry Sliding Mortise Lock, Brass, Light Duty
with for use with skeleton key (1048) 14.48S Strike plate (1048)
14.471 Privacy Sliding Mortise Lock. Brass, Light Duty Center spindle hole to center key hole: 60 mm (1047) Case: 62 mm x 140 mm x 12 mm thick
Front plate 180 x 17 mm
8x8 mm spindle / door lever handles 7x7 mm for thumb-turn: #14.891
16.3SW Privacy SET COMPLETE with Budget Trim see page 1-6-1 14.48S
Strike plate (1048)
#14.491 #14.471
14.891 Passage Sliding Mortise Lock, brass, Light Duty Case: 62 mm x 140 mm x 12 mm thick(1098)
Front plate 180 x 17 mm
For 8x8 mm spindle / door lever handles
14.48S Strike plate (1048)
Brass Escutcheon Plates and trim:
please see pages: 1-6; 1-6-1
14.101 Pocket door Flush Privacy lock (101) 1 1/4” to 1 1/2” thick doors, 1 1/4” backset; brass chrome pl.
#14.891
Lock #14.152 Stainless steel Mortise Sliding door lock For trim see page #1-1-2 • backset 40 mm - 1 9/16” Strike #14.15S • Minimum door thickness 28 mm - 1 1/8” • Pocket doors: Minimum door thickness using flush
escutcheon plates on both sides: 44 mm - 2 3/4”
• Stainless steel hook bolt
• With square corners on lock & strike plate
• Strike plate included with lock
14.152 Entry Sliding Mortise Lock Heavy Duty (6152) 304 stainless steel for use with profile cylinder Center spindle hole to center key hole: 92 mm Case: 61 mm x 194 mm x 15 mm thick
Front plate 250 x 25 mm 8x8 mm spindle / door lever handles 14.15S Strike plate 117 x 25 x 4 mm (6152)
14.C19 Entry Sliding Mortise Lock Heavy Duty (14.C19)
18 mm backset or 3/4 inch
Also available as Privacy and Passage Lock but only with Profile Cylinder which determines function.
Lock #14.C19 Profile Cylinder #1400 series ¾” backset Specify door thickness and function cylinder. See page 0-5 Lock #14.152
Strike #14.C99 Stainless Steel Trim and Escutcheon Plates with flush handles: see page 1-2, 1-9-1 and 1-15
\
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware Stainless Steel Sliding Door Locks - 40 mm backset Page 1-14-A
Izerwaren
• Stailness steel Mortise Sliding lock, backset 40 mm - 1 9/16”
Order • Minimum door thickness 23 mm - 7/8” numbers • Pocket doors: Minimum door thickness using flush
escutcheon plates on both sides: 25 mm / 1”
• Minimum size door style 75 mm or 3” wide: • With square corners on lock & strike plate
• Strike plate included with lock • Specify finish:
• Mirror polished stainless steel
• Satin stainless steel
14.152 Entry Sliding Mortise Lock Heavy Duty (6152) 304 stainless steel for use with profile cylinder Backset: 40 mm; Front plate 250 x 25 mm
Center spindle hole to center key hole: 92 mm
Case: 61 mm x 194 mm x 15 mm thick
8x8 mm spindle / door lever handles 14.15S Strike plate 117 x 25 x 4 mm (6152)
14.C19 Entry Sliding Mortise Lock 304 stainless steel for use with profile cylinder Backset 22 mm Front plate 250 x 25 mm Lock #14.152 Lock #14.152 Strike #14.15S Center spindle hole to center key hole: 92 mm Lever #12.527 Rose #12.507
Cyl. Rose #12.517 Cyl. #05.400
8x8 mm spindle / door lever handles
14.C99 Strike plate 117 x 25 x 4 mm
12.527 Stainless steel Lever # 12.527; 135 mm long; stands off 58 mm
Strike #14.15S
12.53F Semi Flush door handle (53F) 143 mm x 25 mm
Projects 1 1/8” from surface door, including the
escutcheon
12.222 Stainless steel escutcheon plate with radius, 245 x 45 x 9 mm
Outside plate screws invisible; Inside plate screws visible
Lock #14.152 Strike #14.15S
12.223 Nylon sleeves for use with aluminum doors Lever #12.53F only for escutcheon #12.222 Escutcheon #12.222 Cylinder #05.400
#12.416 #12.222 220 x 36 mm 245 x 45 mm 12.507 Oval Rose for lever 66.5 x 29.5 mm
12.517 Oval Rose; for Profile Cylinder 66.5 mm x 29.5 mm
12.416 Stainless steel escutcheon plate narrow style Square corners; 220 x 36 mm (8 5/8 inch x 1 3/8 inch)
Profile Cylinder #1400 series Specify door thickness and function cylinder. See page 0-5
Locks Functions: Privacy, Passage and Entry. See also page 1-1-2; 1-2; 1-9-1 and 1-15. Lock #14.C19 lock #14.152 SLIDING MORTISE LOCKS ARE 20 mm backset 40 mm backset Lock #14.C19 Strike #14.C99 ADAPTABLE TO AUTOMATIC 18 mm ~ ¾ inch backset SLIDING DOOR SYSTEMS Lever #12.527 Rose #12.507 Cyl. Rose #12.517 Cyl. #05.400
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware Stainless Steel Sliding Door Locks - 40 mm backset Page 1-14-B
Mechanism: #14.152 + strike Lever: #12.045 Escutrcheon #12.222 Picture showing: St.st. Flap cover for Mechanism: #14.152 +strike profile cylinder Escutcheon: #12.222 seawater resisting Lever: #12.53F available Profile cylinder: #05.405
Profily cylinder #05.405; knob # 05.502
Sliding Door Locks - 40 mm backset Meets DIN #81300 standard Page 1-14
Izerwaren • Brass Mortise Sliding lock, backset 40 mm - 1 9/16” Order • Minimum door thickness 23 mm - 7/8” numbers • Pocket doors: Minimum door thickness using flush
escutcheon plates on both sides: 25 mm / 1” • Solid brass hook bolt; Strike plate included with lock
• With square corners on lock & strike plate • Specify finish:
• BPC polished chrome plated brass
• BSC satin chrome plated brass
• BP polished brass
14.481
Entry Sliding Mortise Lock, Brass, Light Duty
for use with profile cylinder (1049)
Center spindle hole to center key hole: 60 mm
Case: 62 mm x 140 mm x 12 mm thick #14.481
Front plate 180 x 17 mm
8x8 mm spindle / door lever handles #14.491 16.3SZ see page 1-6-1 Entry SET COMPLETE with Budget Trim
14.491 Entry Sliding Mortise Lock, Brass, Light Duty
with for use with skeleton key (1048) 14.48S Strike plate (1048)
14.471 Privacy Sliding Mortise Lock. Brass, Light Duty Center spindle hole to center key hole: 60 mm (1047) Case: 62 mm x 140 mm x 12 mm thick
Front plate 180 x 17 mm
8x8 mm spindle / door lever handles 7x7 mm for thumb-turn: #14.891
16.3SW Privacy SET COMPLETE with Budget Trim see page 1-6-1 14.48S
Strike plate (1048)
#14.491 #14.471
14.891 Passage Sliding Mortise Lock, brass, Light Duty Case: 62 mm x 140 mm x 12 mm thick(1098)
Front plate 180 x 17 mm
For 8x8 mm spindle / door lever handles
14.48S Strike plate (1048)
Brass Escutcheon Plates and trim:
please see pages: 1-6; 1-6-1
14.101 Pocket door Flush Privacy lock (101) 1 1/4” to 1 1/2” thick doors, 1 1/4” backset; brass chrome pl.
#14.891
Lock #14.152 Stainless steel Mortise Sliding door lock For trim see page #1-1-2 • backset 40 mm - 1 9/16” Strike #14.15S • Minimum door thickness 28 mm - 1 1/8” • Pocket doors: Minimum door thickness using flush
escutcheon plates on both sides: 44 mm - 2 3/4”
• Stainless steel hook bolt
• With square corners on lock & strike plate
• Strike plate included with lock
14.152 Entry Sliding Mortise Lock Heavy Duty (6152) 304 stainless steel for use with profile cylinder Center spindle hole to center key hole: 92 mm Case: 61 mm x 194 mm x 15 mm thick
Front plate 250 x 25 mm 8x8 mm spindle / door lever handles 14.15S Strike plate 117 x 25 x 4 mm (6152)
14.C19 Entry Sliding Mortise Lock Heavy Duty (14.C19)
18 mm backset or 3/4 inch
Also available as Privacy and Passage Lock but only with Profile Cylinder which determines function.
Lock #14.C19 Profile Cylinder #1400 series ¾” backset Specify door thickness and function cylinder. See page 0-5 Lock #14.152
Strike #14.C99 Stainless Steel Trim and Escutcheon Plates with flush handles: see page 1-2, 1-9-1 and 1-15
\
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware 316 Stainless steel Cabinet and Drawer Pulls Page 1-15
Izerwaren • 316 Stainless steel pulls with or Order without thrust roses numbers • Specify finish:
• SS satin stainless steel
• PS polished stainless steel
• LTF Life Time Finish Gold color
• LTF Life Time Finish Brass color
• (LTF limited available)
Cabinet and drawer pulls 10 mm diameter; 3/8” Pull #15.040 and #15.035
INSTALLATION: For front mounting with M6 bushings or for use with M5 machine screws,
back mounting only Ø x length x width (center to center) 15.032 10 x 32 x 32 mm straight 15.040 10 x 40 x 32 mm straight 15.03C 10 x 32 x 32 mm cropped 15.03A 10 x 32 x 32 mm angle 90 degree 15.04A 10 x 45 x 32 mm angle 45 degree Pull #15.03C
Pull #15.032 10 x 40 x 32 mm Pull #15.03A
Pull #15.03A 10 x 32 x 32 mm
Pull knob #15.016
Cabinet pulls
15.016 10 Ø x 17 mm knob cylindrical
15.010 14 Ø x 23 mm knob cylindrical
15.000 14 Ø x 21 mm knob with edge
15.005 14 Ø x 34 mm knob with hook
15.020 Thrust-roses 20 mm x 1.5 mm
Knob with hook #15.001 Knob cylindrical #15.010 Knob with edge #15.000
PLEASE SPECIFYDOOR THICKNESS
Pull with hook #15.001 with thrust rose #15.020
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware 316 Stainless steel Door Pulls Page 1-15-1
Izerwaren • 316 Stainless steel pulls with or Order without thrust roses numbers • Specify finish:
• SS satin stainless steel
• PS polished stainless steel
• BP polished brass
• GBP gold plated brass
Door pulls and cabinet pulls
10 mm diameter; 3/8”
for front mounting with M6 bushings for back mounting with M5 machine screws,
Ø x length x width (center to center) 15.196 10 x 40 x 96 mm straight pull 15.128 10 x 40 x 128 mm 15.124 10 x 40 x 224 mm 15.120 10 x 40 x 320 mm 15.116 10 x 40 x 416 mm 15.112 10 x 40 x 512 mm Ø Door pull #15.128 10 x 40 x 128 mm
15.020 Thrust-roses 20 mm Ø x 1.5 mm
SPECIFY DOORTHICKNESS
WHEN ORDERING Door pull #15.128 10 Ø x 40 x 512 mm
#15.196 #15.128 #15.124 #15.120 #15.116 #15.112
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
316 Stainless steel Door Pulls Page 1-15-2
Izerwaren • 316 Stainless steel pulls with or
Order without thrust roses numbers • Specify finish:
• SS satin stainless steel
• PS polished stainless steel
•
LTF Life Time Finish Gold color
• LTF Life Time Finish Brass color
• (LTF limited available)
Door pulls Cranked Offset
14 mm diameter; 17/32” Door pull #15.427 #Door Pull #15.923 19 mm diameter; 3/4”
APPLICATIONS:
For front mounting with M8 bushes with or without thrust roses or For back mounting with M8 bolts with or without thrust roses or Back to back mounting with M8 bolts with bush with or without thrust roses or Glass mounting with small thrust roses or Glass mounting with big thrust roses
Ø x length x width (center to center) 15.427 14Ø x 50 x 60 x 125 mm offset Pull #15.405 14Ø x 50 x 60 x 300 mm
15.405 14Ø x 50 x 60 x 300 mm offset Glass mounted with M8 bolt # 15.008
15.458 14Ø x 50 x 60 x 650 mm offset #Door Pull #15.405 #Door Pull #15.901
15.465 19Ø x 65 x 60 x 125 mm offset
15.923 19Ø x 65 x 60 x 300 mm offset
15.901 19Ø x 65 x 60 x 650 mm offset
15.954 19Ø x 93 x 105 mm pull or hook
15.050 50 mm Ø x 2 mm Thrust-roses: 15.030 Thrust-roses: 30 mm Ø x 2 mm 15.014 14 mm Ø x 2 mm Thrust-roses:
Shown small and big thrust roses
Back mounting with st.st. bolt
15.008 M8 x 90 mm bolts with stainless steel Pull #15.901 with 50 mm Ø thrust roses 15.00G Fittings for glass to glass Pull size: 19Ø x 65 x 60 x 300 mm Back to back through bolts M8 st. steel 15.00T
Door pull #15.458 Door pull #15.954
through bolts M8 stainless steel
SPECIFY DOORTHICKNESS!!
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
316 Stainless steel Door Pulls Page 1-15-3
Izerwaren • 316 Stainless steel pulls with or Order without thrust roses numbers • Specify finish:
• SS satin stainless steel
• PS polished stainless steel
•
LTF Life Time Finish Gold color
• LTF Life Time Finish Brass color Door pull #15.445 • (LTF limited available)
Pull and or coat or hat hook #15.600 14 x 93 x 105 mm
Door pulls 14 mm diameter; 17/32”
INSTALLATION:
For front mounting with M8 bushings or For back mounting with M8 bolts without thrust roses or For back mounting with M8 bolts with thrust roses
or Door pull #15.425 Back to back mounting with M8 bolts with bush without thrust roses or Back to back mounting with M8 bolts with bush without thrust roses or Glass mounting with small thrust roses or Glass mounting with small thrust roses
Ø x length x width (center to center) 15.445 14Ø x 45 x 45 mm straight pull
15.425 Ø 14 x 50 x 125 mm 15.430 14Ø x 50 x 300 mm 15.465 14Ø x 50 x 650 mm
15.460 14Ø x 50 x 125 mm on plate small
15.475 Ø 14 x 50 x 125 mm on plate big Door pull on plate #15.460; Pull: 50 x 125 mm; Plate: 60 x 175 mm 15.600 14Ø x 93 x 105 mm pull or hook Door pull on plate #15.475; Pull: 50 x 125 mm; Plate: 175 x 175 m
15.030 Thrust-roses: 30 mm Ø x 2 mm
15.014 Thrust-roses: 14 mm Ø x 2 mm #Door Pull #15.430
Pull #15.430 14 x 50 x 300 mm
Shown small and big thrust roses
Back mounting with st.st. bolt 15.008 M8 x 90 mm bolts with stainless steel
15.00G Fittings for glass to glass 15.00T Back to back through bolts M8 st. steel
Door pull #15.465 through bolts M8 stainless steel
SPECIFY DOORTHICKNESS! Pull #15.430 14 x 50 x 300 mm; used as towel rack
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
316 Stainless steel Door Pulls Page 1-15-4
Izerwaren • 316 Stainless steel pulls with or Order without thrust roses numbers • Specify finish:
• SS satin stainless steel
• PS polished stainless steel
•
LTF Life Time Finish Gold color
• LTF Life Time Finish Brass color
• (LTF limited available)
Door pulls 19 mm diameter; 3/4”
INSTALLATION:
Door pull #15.925 For front mounting with M8 bushings Door pull #15.911 Door pull #15.913 with plate 175 x 175 mm On plate: 60 x 175 mm
or For back mounting with M8 bolts without thrust roses
or
For back mounting with M8 bolts with thrust roses or Back to back mounting with M8 bolts with bush without thrust roses or Back to back mounting with M8 bolts with bush without thrust roses or Glass mounting with small thrust roses or Glass mounting with small thrust roses
Ø x length x width (center to center) 15.925 19Ø x 65 x 125 mm straight pull
15.920 19Ø x 65 x 200 mm
15.930 19Ø x 65 x 300 mm #Door Pull #15.920 15.965 19Ø x 65 x 650 mm
15.911 19Ø x 65 x 125 mm on plate small size plate: 60 x 175 mm
15.913 19Ø x 65 x 125 mm on plate big
size plate: 175 x 175 mm
15.030 30 mm Ø x 2 mm Thrust-roses: 15.019 Thrust-roses: 19 mm Ø x 2 mm
Pull #15.930 19 x 65 x 300 mm Mounted at right angles through glass using glass fittings #15.00G and through bolts #15.008
Shown small and big thrust roses
Sample thrust rose mounting
Back mounting with M8 st.st.bolt 15.008 M8 x 90 mm bolts with stainless steel
15.00G Fittings for glass to glass through bolts M8 or M10 stainless steel 15.00T Back to back through bolts M8 st. steel
SPECIFY DOORTHICKNESS! Door pull #15.965
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
316 Stainless steel Door Pulls Page 1-15-5
Izerwaren • 316 Stainless steel pulls with or Order without thrust roses numbers • Specify finish:
• SS satin stainless steel
• PS polished stainless steel
•
LTF Life Time Finish Gold color
• LTF Life Time Finish Brass color
• (LTF limited available)
Door pulls 25 mm diameter; 1”
INSTALLATION:
For front mounting with M10 bushings or For back mounting with M10 bolts without thrust roses or For back mounting with M10 bolts with thrust roses Door pull #15.253 or Back to back mounting with M10 bolts with bush without thrust roses or Back to back mounting with M10 bolts Pull #15.930 25 x 70 x 300 mm Mounted through glass using glass fittings #15.00G and through bolts #15.010 with bush without thrust roses or Glass mounting with thrust roses or
Glass mounting without thrust roses
Ø x length x width (center to center) 15.253 25Ø x 70 x 300 mm straight pull
15.256 25Ø x 70 x 650 mm straight pull
15.258 25Ø x 70 x 95 x 300 cranked offset
15.231 25Ø x 70 x 95 x 650 cranked offset
15.030 Thrust-roses: 30 mm Ø x 2 mm
15.019 Thrust-roses: 19 mm Ø x 2 mm
Shown small and big thrust roses
#Door Pull #15.256
Cranked offset pull # 15.258 Cranked offset pull # 15.231
Back mounting with M8 st.st.bolt 15.010 M10 x 90 mm bolts stainless steel 15.00G Fittings for glass to glass
15.01T Back to back through bolts M10 st. st.
through bolts M10 stainless steel
SPECIFY DOORTHICKNESS! Cranked offset pull #15.258; 25Ø x 70 x 300 mm
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
316 Stainless steel Door Pulls Page 1-15-6
Izerwaren • 316 Stainless steel pulls with or
Order without thrust roses numbers • Specify finish:
• SS satin stainless steel
• PS polished stainless steel
• LTF Life Time Finish Gold color
• LTF Life Time Finish Brass color
• (LTF limited available)
Door pulls 32 mm diameter; 1 1/4”
INSTALLATION:
For front mounting with M12 bolts with roses with concealed fixings or For front mounting with M10 bushings or For back mounting with M12 bolts Door pull #15.323
without thrust roses
or Ø Ø Pull #15.329 32 x 85 x 300 mm; roses #15.963; 80 mm
For back mounting with M12 bolts with FOR CONCEALED FRONT MOUNTING OR BACK MOUNTING
thrust roses
or Back to back mounting with M12 bolts with bush without thrust roses or Back to back mounting with M12 bolts with bush without thrust roses or Glass mounting with thrust roses or Glass mounting without thrust roses
Ø x length x width (center to center) 15.323 32Ø x 80 x 300 mm straight pull
15.326 32Ø x 80 x 650 mm straight pull
15.329 32Ø x 80 x 110 x 300 cranked offset
15.325 32Ø x 80 x 110 x 650 cranked offset
15.050 50 mm Ø x 2 mm Thrust-roses: 15.080 Thrust-roses: 80 mm Ø x 4 mm
Door Pull #15.326 Cranked offset pull # 15.325; Cranked offset pull #15.329;
Ø Shown small and big thrust roses 32Ø x 80 x 110 x 650 mm 32 x 80 x 110 x 300 mm
back mounted with M12 bolt
through bolts M12 stainless steel
Back mounting with M12 st.st.bolt
15.012 M12 x 90 mm bolts stainless steel 15.00G Fittings for glass to glass 15.02T Back to back through bolts M12 st. st.
SPECIFY DOORTHICKNESS! Cranked offset Pull #15.329
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
316 Stainless steel Door Pulls Page 1-16
• 316 Stainless steel pulls with or Izerwaren Order without thrust roses • numbers Specify finish: • SS satin stainless steel • PS polished stainless steel • LTF Life Time Finish Gold color • LTF Life Time Finish Brass color
LTF limited available
Door pulls
#16.070 APPLICATIONS: For front mounting with withM8, M10 Angle pull # 16.070; 16Ø x 125 x 175 mm or M12 bushes with concealed fixings or
For back mounting with M8, M10 or M12 bolts without thrust roses
or
For back mounting with thrust roses
or Back to back mounting with bolts with bush without thrust roses or Back to back mounting with bolts with bush without thrust roses or Glass mounting with small thrust roses
or
Glass mounting without big thrust roses
Ø x length x width (center to center) 16.070 16Ø x 125 x 175 mm angle pull
16.425 14Ø x 50 x 125 mm half round pull Pull #16.425; 14Ø x 50 x 125 mm 16.420 19Ø x 65 x 200 mm half round pull Alternative use
16.303 32Ø x 80 x 300 mm half round pull
15.020 Thrust-roses: 20 mm Ø x 1.5 mm 15.030
Thrust-roses: 30 mm Ø x 2 mm 15.050 Thrust-roses: 50 mm Ø x 3 mm
#16.425; 14Ø x 50 x 125 mm
Pull #16.420; 19Ø x 65 x 200 mm
Shown small and big thrust roses
#16.420; 19Ø x 65 x 200 mm
Back mounting with st.st.bolt
15.008 M 8 x 90 mm bolts stainless steel 15.012 M12 x 90 mm bolts stainless steel 15.00G Fittings for glass to glass 15.08T Back to back through bolts M8 st. st. 15.12T Back to back through bolts M12 st. st. #16.303; 32Ø x 80 x 300 mm
Through bolts M8, M10 stainless steel
Pull #16.303; 32Ø x 80 x 300 mm half round pull SPECIFY DOORTHICKNESS!!
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
316 Stainless steel Flush Pulls and Brass Flush Pulls Page 15-2-D
• Izerwaren 316 Stainless steel flush pulls Order • Specify finish:
• numbers SS satin stainless steel • PS polished stainless steel
• LTF Life Time Finish Gold color
• LTF Life Time Finish Brass color
(LTF limited available)
17.115 FLUSH PULLS, ROUND
Diameter x depth Flush pull #17.115
115Ø x 80 Ø x 20 mm flush pull
Flush pull#17.115; 115Ø x 80 Ø x 20 mm
17.077 Diameter x depth
80Ø x 80 Ø x 17 mm flush pull
Flush pull #17.077
Ø Ø Flush pull #17.051; 50 x 28 x 15 mm
17.051 Diameter x depth
50Ø x 28 Ø x 15 mm flush pull
Flush pull #17.051;
17.111 FLUSH PULLS, OVAL ON PLATE
length x width x depth 175 x 175 x 19 mm flush pull on plate
Flush Pull #17.111
Flush Pull #17.420; 175 x 175 x 145 x 40 x 19 mm
15.105 FLUSH PULLS, OVAL
length x width x depth 50 x 102 x 13 mm flush pull
Flush pull #17.105
15.164 FLUSH PULLS, OVAL
length x width x depth 50 x 175 x 19 mm flush pull
Flush pull #17.105; Flush pull #17.164
50 x 102 x 13 mm 50 x 175 x 19 mm Flush pull #17.164
FLUSH PULLS, ROUND, BRASS
LZ.0626 F025326 diameter body 26 mm / 1 inch LZ.0630 F025330 diameter body 30 mm / 1 3/16 inch LZ.0635 F025335 diameter body 35 mm / 1 3/8 inch LZ.0640 F025340 diameter body 40 mm / 1 7/16 inch Material: brass. Finish: Polished lacquered brass Special order: Polished chrome plated.
© IZERWAREN.COM Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware Brass Mortise Locks - 60 mm backset Meets DIN #18251 class 3! ~ #5000 series Page 1-18
Izerwar • Extra heavy duty Brass Mortise lock, backset
en 60 mm - 2 3/8”
Order • Minimum door thickness: 32 mm - 1 1/4” numbers • With anti- friction triple latch bolt
• square corners on lock & strike plate • Strike plate included with lock • Specify left or right hand and door thickness
• Specify finish:
• BPC polished chrome plated brass
• BP polished brass • G gold plated brass
18.490 Entry Mortise Lock (5490) Center spindle hole to center key hole: 72 mm Case: 90 mm x 165 mm x 15.5 mm thick Front plate 209 x 24 mm
For 8x8 mm spindle / door lever handles
Use with profile cylinder key/key or key/knob
18.90B Strike plate (5490B)
Entry mortise lock #18.490 Entry set for Profile Cylinder 18.125 Privacy Mortise Lock (5125) #18.490 Center spindle hole to center key hole: 78 mm
Case: 90 mm x 165 mm x 15.5 mm thick
Front plate 209 x 24 mm
For 8x8 mm spindle / door lever handles Profile Cylinder #1400 series 8 x 8 mm spindle for thumb-turn
18.90B Strike plate (5490B)
18.491 Passage Mortise Lock (5491) Case: 90 mm x 165 mm x 15.5 mm thick Front plate 209 x 24 mm For 8x8 mm spindle / door lever handles
8 x 8 mm spindle for thumb-turn
18.91B Strike plate (5491B)
18.492 Dead Bolt Mortise Lock (5492)(not
depicted) Case: 80 mm x 75 mm x 16 mm thick Front plate 125 x 25 mm Works with Profile Cylinder Key Way
14.241 Strike plate (3241)
Privacy lock for use with thumb- For Sliding door Mortise Locks: (3381Z)
Privacy mortise lock #18.125 turn #18.125 Please see page 1-13
Profile cylinder #1400 series
Key/key or key/knob or knob/indicator
Please See for functions cylinders: page 0-5
ROLLS-ROYCE OF THE MORTISE LOCKS! • Bronze bearings on the follower • Self cocking follower: no play on spindle • Key action on the latch bolt ((5490) • Double throw on dead bolt (5490) • Triple latch bolt = no friction • Latch bolt sound proofed nylon buffer • very heavy construction triple latch bolt
AVAILABLE ON SPECIAL REQUEST WITH: Beveled front end: 1 1/4 degree increments; Oil nipple; Stainless steel front & strike plate;
Passage lock for lever handle only Passage mortise lock #18.491 Backset: 55 mm (2 3/16”) or 80 mm (3 3/16”) #18.491 For Fire doors: Stainless steel and steel case with 10 mm steel spindle; round corners on lock and strike plate
Decorative Door Hardware available in custom finishes from:
Ferraro, Jado, Valli & Colombo, D-line, Murano, GSV, S & B
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
Steel Tubular Privacy locks with backset- 2 3/8” or 2 3/4” Page 1-18-0-A
Izerwaren • Steel tubular latches, Order • backset 2 3/8 - 2 3/4” numbers • Interior grade
• Minimum door thickness: 1 3/8” • Square corners on lock & strike
plate
• Strike plate included with lock
• Specify finish.
• Tubular bolt: 15/16” diameter
• Strike plate included Showing layout Showing inside trim privacy latch #PBL20/50 set
• Anti Panic release on latch bolt Function: Privacy latch with anti panic + emergency release
• Emergency release on outside
Privacy Tubular Lock Bolt 18.513P Backset 2 3/8” (2.375”) 18.510P For lever handles For Knobs
Backset 2 3/4” (2.75”) 18.520P For lever handles 18.523P For Knobs Showing outside trim privacy latch #PBL20/50
PB Trim:
PB.L20/50 PBL20/50 Lever L model 100 mm Rose 50 mm diameter Satin Stainless steel
Function lock: When depressing pin on inside,
outside lever can not be depressed. Order set: 18.513P for levers 18.510P for knobs backset 2 3/8” When depressing inside lever, the latch bolt is released and both levers operate to disengage latch bolt.
Order set: : 18.523P for levers 18.520P for knobs backset 2 3/4”
#18.513P 2 3/8” backset
Showing trim latch #PBT20/50. escutcheon ‘T’ model with privacy outside only.
#18.523P 2 3/4” backset
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
Steel Tubular Latches with backset- 2 3/8” or 2 3/4” Page 1-18-0-B
Izerwaren • Steel tubular latches, Order • backset 2 3/8 - 2 3/4” numbers • Interior grade
• Minimum door thickness: 1 3/8” • Square corners on lock & strike
plate
• Strike plate included with lock
• Specify finish.
Tubular bolt 15/16” diameter
strike plate included
Passage tubular Latch bolt Showing trim passage latch #PBL20/50 18.513 Backset 2 3/8” (2.375”) 18.510 For Lever Handles For Knobs
Backset 2 3/4” (2.75”) 18.520 For Lever Handles 18.523 For Knobs
PB.T20/50 PBT20/50 Lever T model: 100 mm Rose 50 mm diameter Satin Stainless Steel
Passage Latch Showing trim passage latch #PBT20/50
18.513 Order set: 18.513 for levers backset 2 3/8”
18.523 Order set: : 18.523 for levers backset 2 3/4”
PBL20/P236 escutcheon 40 x 235 x 3 mm
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
Steel Privacy Euro locks with backset 65 mm Page 1-18-0-C
Izerwaren • Steel anti panic privacy lock Order • backset 65 mm ~ 2 9/16” numbers • Interior grade
• Minimum door thickness: 1 3/8” • Square corners on lock & strike
plate
• Strike plate included with lock
• Specify finish.
• Lock case 3/4” thick
• Strike plate included
14.3178 Privacy Full Euro Mortise Lock Backset 65 mm ~ 2 9/16” For lever handles For Knobs Front plate lock stainless steel Anti panic function Emergency release function
14.0031 Strike plate 180 x 25 x 1.5 mm
Stainless steel
Showing trim set with privacy lock Left Trim: #PBT20/50 with emergency release Right:#PBL20/50 with thumb- turn
PB Trim:
PBL20/50 PBL20/50 Lever L model 100 mm
Rose 50 mm diameter
PBT20/50 Lever T model Rose 50 mm diameter
PBWC50 Thumb-turn / release with rose Finish: Satin Stainless steel
#14.3178 Privacy lock with anti panic function stainless steel front plate. Backset 65 mm - 2 9/16” #14.0031. Strike plate stainless steel front plate
Function Lock: When locked from inside by thumb-turn, by depressing lever on inside both latch bolt and dead bolt are released. Outside lever does turn but does not turn when dead bolt is engaged. By turning emergency release the outside lever will disengage the latch bolt.
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
Steel Euro mortise style latch with backset- 60 mm ~2 3/8 or 65 mm 2 9/16” Page 1-18-0-D
Izerwaren • Steel euro style mortise
Order • backset 60 or 65 mm numbers • Interior grade
• Minimum door thickness: 1 3/8” • Round corners on lock & strike
plate
• Strike plate included with lock
• Specify finish.
PB.T20/50 PBT20/50 Lever T model: 100 mm Rose 50 mm diameter Satin Stainless Steel
PB.L20/50 PBL20/50 Lever L model: 100 mm Rose 50 mm diameter Showing trim passage latch #PBT20/50 with full euro mortise
Satin Stainless Steel
18.491 Passage Mortise Lock (5491) Backset: 60 mm ~ 2 3/8” Case: 90 mm x 165 mm x 15.5 mm Front plate 209 x 24 mm For 8x8 mm spindle / door lever
18.91B Strike plate (5491B)
14.3193 Passage Mortise Lock Backset: 65 mm ~ 2 9/16” Case: 97 mm x 165 mm x 16 mm Front plate 235 x 24 mm For 8x8 mm spindle / door lever
14.0031 Strike plate for 14.3178
PB.L20236 PBL20/P236 Lever L model: 100 mm Escutcheon 40 x 235 x 4 mm Satin Stainless Steel Passage mortise lock #14.3193 65 mm backset ~ 2 9/16”
Passage strike #14.0031
PBL20/P236 escutcheon 40 x 235 x 3 mm
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
Steel UL ANSI rated Anti Panic Entrance Set Backset 2 3/4” (options) Page 1-18-0-E
Izerwaren • Steel UL rated Anti Panic lock Order • backset 2 3/4” standard numbers • Interior grade
• Minimum door thickness: 1 3/4” • Square corners on lock & strike
plate
• Strike plate included with lock
• Specify finish.
• Strike plate included (ASA)
Full Mortise Lock Backset 2 3/4” 18.9124L For lever handles 18.9124K For Knobs Strike plate ASA model
PBL20/50S PBL20/50 SFC set Lever L model: 100 mm Escutcheon 50 x 251 mm security Thumb-turn PB9 Keyway Schlage Satin Stainless steel
Function Lock: When locked from outside by
key or from inside by thumb- Inside Outside turn, by depressing lever on Trim: #PBL20/50 SFC Set Lever 100 mm; Escutcheon 50 x 251 x 12/20 mm inside both latch bolt and dead bolt are released. Outside lever does not turn when dead bolt is locked.
ASA strike plate stainless steel #18.9124 Full side Entrance lock Anti panic ANSI UL rated
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
Stainless Steel UL ANSI rated Anti Panic Entrance Set Backset 2 3/4” (options) Page 1-18-0-F
Izerwaren • Steel UL rated Anti Panic lock Order • backset 2 3/4” standard numbers • Interior grade
• Minimum door thickness: 1 3/4” • Square corners on lock & strike
plate
• Strike plate included with lock
• Specify finish.
• Strike plate included (ASA)
Full Mortise Lock Backset 2 3/4” 18.9124L For lever handles 18.9124K For Knobs Strike plate ASA model
PBL20/50S PBL20/50 SFC set Lever L model: 100 mm Escutcheon 50 x 251 mm security Thumb-turn PB9 Keyway Schlage Satin Stainless steel
Inside Outside Function Lock: Trim: #PBL20/50 SFC Set Lever 120 mm; Escutcheon 50 x 251 x 12/20 mm When locked from outside by High Security, Anti Panic, ANSI, UL Grade 1 fire resistant. key or from inside by thumb- turn, by depressing lever on inside both latch bolt and dead bolt are released. Outside lever does not turn when dead bolt is locked.
ASA strike plate stainless steel
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
Steel Tubular Latches and Brass Privacy Bolts backset- 2 3/8” or 2 3/4” Page 1-18-1
Izerwaren • Steel tubular latches, backset 2 3/8 - 2 3/4” Order • Not recommended for marine use numbers • Minimum door thickness: 32 mm - 1 1/4”
• Square corners on lock & strike plate • Strike plate included with lock
• Brass tubular privacy bolt, backset 2 3/8 - 2
3/4”; to fit with tubular latch
• Specify finish:
• BPC polished chrome plated brass
• BP polished brass
18.011 Passage tubular Latch bolt (6011) backset 2 3/8” For lever handles Tubular bolt 15/16” diameter For 7x7 mm spindle for door lever handles
strike plate included
18.012 Passage tubular Latch bolt (6012) backset 2 3/4” For lever handles Tubular bolt 15/16” diameter For 7x7 mm spindle for door lever handles strike plate included
Passage latch #18. 011 Passage latch for knobs #18.013 18.013 Passage tubular latch bolt (6013) for lever handles backset 2 3/8” or 2 3/4” backset 2 3/8 For lever handles see page 1-11 or ask for our color brochures For knobs
Tubular bolt 15/16” diameter
For 7x7 mm spindle for door lever handles
strike plate included
18.014 Passage tubular latch bolt (6014) backset 2 3/4 For knobs
Tubular bolt 15/16” diameter
For 7x7 mm spindle for door lever handles
strike plate included
18.752 Lever with roses 2 3/8 diameter with tubular latch Roses 2 3/8”; backset 2 3/8
With 7x7 mm spindles
strike plate included Lever with roses set specify 18.752 passage or privacy
See also page 1-11 and the Izerwaren Trim Brochure for more lever designs
18.455 Privacy bolt separate, tubular backset 2 3/8 or 2 3/4
Tubular bolt 1” diameter With 5 x 5 mm spindle, thumb-turn in side, indicator outside roses 1 3/4 inch diameter strike plate included Material: Brass
#18.455 tubular privacy bolt.
18.017 Privacy tubular bolt = 2 3/8”
18.018 Privacy tubular bolt = 2 3/4” With oblong escutcheon for narrow style
Privacy turning bolt #18.017 with oblong escutcheon 14.72Z FOR KEY LOCK WE RECOMMEND A BRASS thumb-turn inside, indicator outside. MORTISE DEAD BOLT: (sea also page 1-4)
14.17Z Dead Bolt Mortise Lock (1172Z) Case: 80 mm x 75 mm x 16 mm thick Front plate 125 x 25 mm Works with Profile Cylinder Key Way
14.241 Strike plate (3241)
05.405 Profile cylinder #1400 series see page 1-5
Dead bolt mortise lock #1172Z; turning bolt #GSV7718
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
Steel Tubular Latches and Brass Privacy Bolts backset- 2 3/8” or 2 3/4” Page 1-18-2
Izerware • Steel tubular latches, backset 2 3/8 - 2 3/4” n Order • Not recommended for marine use number s • Minimum door thickness: 32 mm - 1 1/4”
• Square corners on lock & strike plate • Strike plate included with lock • Brass tubular privacy bolt, backset 2 3/8 - 2
3/4”; to fit with tubular latch
• Specify finish:
• BPC polished chrome plated brass
• BP polished brass
Passage tubular Latch bolt (6011) 18.011 backset 2 3/8” For lever handles Tubular bolt 15/16” diameter For 7x7 mm spindle for door lever handles strike plate included
Passage tubular Latch bolt (6012) 18.012 backset 2 3/4” For lever handles Tubular bolt 15/16” diameter For 7x7 mm spindle for door lever handles strike plate included
Showing mechanism for levers #18.014 Escutcheon #840 Lever #949; Privacy Set
Passage tubular latch bolt (6013) shown with thumb-turn #4005 18.013 backset 2 3/8 mechanism for dead bolt 18.455 For knobs Tubular bolt 15/16” diameter
For 7x7 mm spindle for door lever handles
strike plate included
Passage tubular latch bolt (6014) 18.014 backset 2 3/4 For knobs Tubular bolt 15/16” diameter For 7x7 mm spindle for door lever handles
strike plate included
Lever with roses 2 3/8 diameter 18.752 with tubular latch Roses 2 3/8”; backset 2 3/8
With 7x7 mm spindles
strike plate included
Privacy bolt separate, tubular 18.455 backset 2 3/8 or 2 3/4 Tubular bolt 1” diameter
With 5 x 5 mm spindle, thumb-turn in side, indicator outside roses 1 3/4 inch diameter strike plate included Material: Brass
Sample Lever with roses set specify 18.752 passage or privacy
See also page 1-11 and the Izerwaren Trim Brochure for more lever designs
#18.455 tubular privacy bolt. Escutcheon #840 Lever #949; Privacy Setshown NOTE: all steel parts, not recommended for marine use or coastal environment. with thumb-turn #4005
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware Steel double door Mortise Locks - 50/45 mm backset Page 1-19
Izerwaren • Extra heavy duty double door mortise lock, backset passive Order side 50 mm - 2”; active side 45 mm 1 3/4” numbers • Minimum door thickness: 32 mm - 1 1/4” • square corners on locks
• Specify left or right hand and door thickness • Specify finish stainless steel front plate:
• satin stainless steel
• polished stainless steel
• Life Time Finish (PVD coated in Gold or Brass color)
For French doors or interlocking doors. Function: Inside: First active door needs to be unlocked by key or thumb-turn. Both doors are opened at the same time or
separate by pushing down lever on passive side and/or active side. Outside: Active side is unlocked by key. Passive side can not be opened when active side is locked with key. After active
side is unlocked both doors can be opened by depressing the lever handles on the active and/or passive side. Double door entry mortise lock set #19.659 (passive) The passive side is locked by bolts in top and bottom of door #19.668 (active) jamb. The active side is locked with latch and dead bolt inside
front plate of the passive lock case.
For use as Anti Panic Lockset for double doors. Lock case thickness 15.5 mm Profile Cylinder #1400 series Function: Both doors are opened at the same time from the inside by
pushing down lever of either passive side or active side. From outside: Active lock can only be unlocked by key. Both passive and active lock are executed with dummy lever handles on outside.
Passive side is locked by bolts in top and bottom of door jamb. Active side is locked with latch and dead bolt inside front plate
of the passive lock case.
19.668 Active lock, 45 mm backset Case 178x60x15.5 mm
Front plate 24x245 mm Latch action on the dead bolt Key action on lever handle (in anti-panic execution) Front plate stainless steel, case galvanized steel
Entry mortise lock set #19.668 (active
19.659 Passive lock, 50 mm backset
Case 178x65x15.5 mm
Front plate 24x245 mm Front plate stainless steel, case galvanized steel Vertical bolt action with two M8 threaded bolts
Stainless steel bolts 5/16 supplied, with strikes
19.661 Order separate: vertical stainless steel bolts 5/16” and strikes. Please indicate door size when ordering.
OTHER FUNCTIONS POSSIBLE. Call our office for details
Profile cylinder series 1400 see page 0-5 catalog
Life Time Finish Possible
passive mortise lock set #19.659 Operates through vertical bolts
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware Full Stainless Steel Tubular Lock Set - Page 1-19-1
Izerwaren • Heavy duty stainless steel tubular mortise lock Order • backset from 2 3/4" to– 2 3/8” or 70 m to 60 mm numbers • Door thickness: 1 3/4” to 1 3/8” or 44 mm to 35 mm
• Both handed • 304 stainless steel lock and strike (strike plate included) • Finish: brushed stainless steel
• mirror polished stainless steel
• titanium gold coated (life time warrantee)
• titanium brass coated (life time warrantee)
• note: Life Time Finish Coatings only on quantity.
Exterior grade for stainless steel,
aluminum, steel and wooden doors #19.T19 Stainless steel tubular lockset entry (function key/push knob) 19.T31 Entry Function key/key:
Backset adjustable from 2 3/4" to– 2 3/8” Door thickness adjustable from 2 3/4" to– 2 3/8”
Stainless steel strike plate with nylon strike cup.
Strike plate adjustable
19.T19 Entry Function key/push knob (panic release)
Backset adjustable from 2 3/4" to– 2 3/8”
2 3/4" to– 2 3/8” Door thickness adjustable from
Stainless steel strike plate with nylon strike cup. Strike plate adjustable
19.T02
Privacy Function knob/emergency release:
Backset adjustable from 2 3/4" to– 2 3/8”
2 3/4" to– 2 3/8 Door thickness adjustable from ”
Stainless steel strike plate with nylon strike cup.
Strike plate adjustable
#19.T19 Stainless steel tubular lockset entry function 19.T01 Passage Function key/push knob shown push knob/ interior side; polished Backset adjustable from 2 3/4" to– 2 3/8” finish
Door thickness adjustable from 2 3/4" to– 2 3/8” Stainless steel strike plate with nylon strike cup. Strike plate adjustable
19.311 Strike plate separate
1 1/16” x 2 3/4” ~28.4 mm x 69 mm Lip: extents 3/8” or 8 mm
#19.T19 Stainless steel tubular lockset entry function:
key/push knob; shown push key side/ exterior side; satin 19.312
Plastic cup separate finish
1 1/32” x 2 11/16” ~ 27 x 68 x 1 mm
19.313 Keys blanks separate
Strike #19.311 Plastic Cup 19.312
Installation:
• Drill hole of 2 1/8” for lock body Drill hole of 1” for latch bolt shaft All locks are fire rated and meet all grade 1 requirements. For more functions and all sizes see page 1-19-B All lock are UL listed for grade A or lesser doors. All locks are approved for US Coastguard and US Navy.
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
Stainless Steel Tubular Lock Set - Page 1-19-2
Izerwaren • Heavy duty stainless steel tubular Specify finish: Order mortise lock functions Satin stainless steel numbers Polished stainless steel Polished brass color (PVD)*
Polished gold color (PVD)* *PVD coating limited available only
19.T01 H01 Passage function: Latch by knob on either side
Picture: satin stainless steel
#19.T19 entry set H19
H02Privacy function: Latch by knob on either side, except 19.T02 when inside pushbutton locks outside
knob.
Unlocking by turning inside knob, by
closing door or turning outside emergency slot
H19 Entry function: (dormitory) Latch by knob on either side, except 19.T19
when outside knob is locked by inside
pushbutton or outside key.
Unlocking by turning inside knob, by
Picture: polished stainless steel
closing door or using outside key
#19.T31 entry set H31
19.T31 H 31 Entry function: (communicating doors) Latch by knob on either side, except when key locks its own knob
SPECIFY LARGE ROSE #19.TB4
Knob #19.T03 with rose #19.TA4 OR SMALL ROSE #19.TA4 SMALL Rose 2 9/16” diameter
Locks are standard shipped with strike and plastic cup:
19.311 strike #19.311
Note: other strike plates available
19.312 Plastic cup #19.312
Knob #19.T03 with rose #19.TB4
LARGE Rose 3 1/4” diameter
All locks are fire rated and meet all grade 1
requirements.
1 1/32” x 2 11/16” ~ 27 x 68 x 1 mm
All lock are UL listed for grade A or lesser
doors.
Key blanks
19.313 All locks are approved for US Coastguard and US Navy. = Keyway exchangeable
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware
Stainless Steel Tubular Lock Sets - Page 1-19-4
Izerwaren • Heavy duty stainless steel tubular Specify finish: Order mortise lock functions Satin stainless steel numbers Polished stainless steel H08 + H09 Polished brass color (PVD)*
Polished gold color (PVD)* *PVD coating limited available only
19.T08 19.T09 H08 Single Dummy trim H09 Double Dummy trim
H11
H11 Entrance and office doors: 19.T11 Latch by knob on either side, except
when inside pushbutton locks outside
knob.
Unlocking by turning inside knob, by
closing door or turning outside Knob #19.T03 with rose #19.TA4 H12 emergency slot ANSI GRADE F82 GRADE 1 FED 161A SMALL Rose 2 9/16” diameter
19.T12 H12 Store Room and Closet doors
Latch by inside knob, outside knob
always rigid. Key will retract latch.
ANSI GRADE F86 GRADE 1 FED 161D
H13
Knob #19.T03 with rose #19.TB4
H 13 Exterior doors LARGE Rose 3 1/4” diameter
19.T13 Latch by knob on either side, except when inside button locks outside knob. Key will retract latch. ANSI GRADE F82 GRADE 1 FED 161B
H17
H 17 Classroom doors
19.T17 Latch by knob on either side, except SPECIFY LARGE ROSE #19.TB4 when key locks outside knob. OR SMALL ROSE #19.TA4 Key will unlock knob. ANSI GRADE F84 GRADE 1 FED 161R
All locks are fire rated and meet all grade 1
requirements.
H32
All lock are UL listed for grade A or lesser
doors.
All locks are approved for US Coastguard H 32 Public entrance and US Navy. 19.T32 Latch by knob on either side, except Locks are standard shipped with strike and when outside knob is locked by inside plastic cup key. Outside key will retract latch. . ANSI GRADE F80 GRADE 1 FED 161S
H33
19.T33 H 33 Asylum doors
Both knobs always rigid
Strike plate separate #19.311
Either key will retract latch.
1 1/16” x 2 3/4” ~ ANSI GRADE F87 GRADE 1 FED 161W 28.4 mm x 69 mm
Lip: extents 3/8” or 8 mm
H35
19.T35 H 35 Exterior doors Latch by knob, except when either key locks both knobs Plastic cup separate ANSI GRADE F91 GRADE 1 FED 161G 1 1/32” x 2 11/16” ~ 27 x 68 x 1 mm
© IZERWAREN INC. Tel.: 954-763-6686 Fax.: 954-522-6903 for Exceptional European Hardware