DOCSLIB.ORG

Engine Oils by LAKE SPEED JR

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Engine Oils by LAKE SPEED JR EP 10-2009 34-50_Layout 1 10/8/09 1:25 PM Page 36 Engine Oils BY LAKE SPEED JR. More has changed in oil than ZDDP up of deposits also helps protect catalytic What exactly is synthetic oil? content in the last 10 years. The levels of converters from “Zinc”, so modern To answer that question you have to ask detergents have also increased, and both passenger car oil formulas now feature another question. What is in a motor are contributing factors in the flat-tappet increased levels of detergents. You’ve oil? Motor oil is a blend of performance camshaft problems seen in the engine probably seen the TV ads that promote additives in a base oil. The additives building industry over the last 4 to 5 oils that clean your engine. Those are enhance the performance of the lubricant years. high detergent oils, and they are great beyond the performance of the base oil. The oil additive Zinc Dialkyl for modern passenger car engines. They Typical additives are detergents, anti- Dithiophosphate (commonly referred to are not great for restoration and street wear agents, friction modifiers, viscosity as “Zinc” or ZDDP) provides anti-wear rod engines. modifiers and many other chemicals that protection for engines — especially flat The balance of “Zinc” vs. Detergents help the lubricant meet the performance tappet camshafts. has changed in the last several years in requirements of an application. The base “Zinc” works because it is a polar an effort to protect catalytic converters. oil is the other part of a motor oil, and molecule (it has a positive charge), so the This shift in the balance away from the base oil makes up the majority of the “Zinc” molecule is attracted to steel. “Zinc” and towards detergents has had finished motor oil. Base oils typically Under heat and load, the “Zinc” a negative impact on flat tappet come from 3 sources: refined crude oil, molecule reacts with the steel and creates camshaft life. synthetic base stocks, or vegetable oils. a film. The film created by the “Zinc” Why is this important? In the old The vast majority of motor oils use prevents metal to metal contact. That is days, engine builders used SAE 30 grade, refined crude oil as the base oil. These how “Zinc” works to protect your non-detergent oil to break-in an engine. oils are commonly referred to as mineral engine. The break-in period is the most critical oils or petroleum oils. Refined crude oils Detergents are also polar molecules, time in the life of an engine. The non- provide good lubricity at a lower cost, and the detergent is designed to prevent detergent oil was effective at establishing but refined crude oils have a strong build up of deposits in the engine. a “Zinc” anti-wear film in the engine tendency to oxidize at high temperatures As a result, both the “Zinc” and during break-in because the “Zinc” did (AKA breaking down). Because detergents compete against each other not have to compete against the petroleum oils come out of the ground, for the metal surface. detergent. As a result, the engine had they contain many imperfections. These The reduction in “Zinc” in modern better access to the “Zinc” it needed imperfections lead to breakdown at high passenger car grade oils relates to when we needed it the most. Modern temperatures. When an oil catalytic converter life. The same coating engines feature roller follower overhead “breaksdown” it can create deposits in effect that “Zinc” provides to protect cam designs that reduce weight and the engine. A synthetic oil is a man made your camshaft also damages your sliding friction. As a result, these copy of petroleum oil without any of the catalytic converter. To extend the life of valvetrains don’t need higher levels of “imperfections” that lead to catalytic converters, “Zinc” content has “Zinc”, but a Big Block Chevy has push “breakdown”. As a result, synthetic oils been reduced. rods, a flat tappet camshaft and big steel can safely handle much higher operating At the same time, detergent levels valves. These older engines feature temperatures compared to petroleum have increased to provide better engine increased sliding friction and weight. oils. Because synthetic base oils are made cleanliness, longer catalytic converter life These engines need increased levels of in a controlled environment, they are and extended oil drain intervals. “Zinc”. The oils originally developed for 100% pure, and that also allows The use of Exhaust Gas Recirculation Big Block Chevys used less detergent and synthetic oils to flow better at low valves cleans up the emissions of an more “Zinc” than modern engine oils. temperatures. Synthetic oils can reduce engine, but the use of EGR valves To protect a flat-tappet camshaft, Cold Start Wear by up to 70% increases the need for detergents due to you need to properly break-in the compared to Petroleum oils. Since Hot increased temperatures and recirculated camshaft with a high “Zinc” oil and Rods and Restoration cars spend a lot of combustion by-products. avoid high detergent oils for both break- time in the garage, synthetic oils provide Detergents’ ability to prevent build in and service fill. continued on page 39 36 OCT-DEC 2009 engine professional EP 10-2009 34-50_Layout 1 10/8/09 1:26 PM Page 39 ENGINE OILS BY LAKE SPEED JR. excellent flow when the engine is oil. The API ratings tell you about the started after being in the garage for additive package in the oil. Since a time. 1992 when the American Petroleum Institute (API) introduced the SM – Is it safe to use synthetic oil in a GF1 standard, the “Zinc” content in flat-tappet engine? passenger car grades of motor oil has After a proper break-in period on been limited. The level of “Zinc” in petroleum oil, a synthetic oil with the passenger car oils was reduced again proper balance of “Zinc” and in 1996 to 1,000 ppm under API SJ – detergents will provide greater GF2 standards. In 2001, API SL – protection than a petroleum oil. GF3 standards restricted “Zinc” Over the years, synthetic oils have content to 850 ppm, and that is when been criticized for their performance cams started to fail. When the API in older style engines. The problem went to the current standard (SM – has been the use of oils designed for GF4), camshaft failures skyrocketed. modern passenger cars in older style In addition to the reduction in engines. The synthetic base oil is “Zinc”, detergent levels increased as superior to conventional petroleum each new API standard took effect. base oils, but the additive packages in An API SJ rated oil contained half the modern passenger car formulations amount of detergent that an API SM will not provide the levels of oil contains. The increase in protection a flat-tappet camshaft detergents and reduction in “Zinc” needs. The problem is not synthetic have been a double whammy for flat oil. The problem is using modern oils tappet camshafts. in older style engines. You shouldn’t Because NASCAR forces the use a racing oil in a daily driver, so Sprint Cup Series teams to run flat- why would you use a modern daily tappet camshafts, Joe Gibbs Racing driver oil in a restoration car? developed high “Zinc” oils to Is it safe to use synthetic oils in properly break-in our flat tappet transmissions and rear ends? camshafts. The Joe Gibbs BR Break- If the oil has the proper additives for In oil is the number 1 selling break-in the materials, it is safe to use oil in the world. The Joe Gibbs BR synthetic gear, transmission and Break-In oil features a low detergent power steering fluid in a street rod or and high “Zinc” formula that allows restoration car. the “Zinc” additive to create a protective film in your engine. Joe What is an API rating? How is it different Gibbs also offers a Hot Rod oil that from an oil’s viscosity rating? also features a high “Zinc” content The viscosity ratings of the oil with a normal detergent level just for describe the cold start and high non-emission controlled vehicles temperature flow rates of the oil. A (street rods, restorations, etc…). The 0W-30 flows better at start up than a Joe Gibbs Hot Rod oil also features a 10W-30. The number before the “W” US military grade rust and corrosion is the cold start viscosity, so the lower inhibitor that protects your engine the number, the easier it is to start the while the car is in storage for the engine. The higher the number, the winter. Conventional oils will run more power it takes to turn the down into the oil pan after extended motor over when you hit the ignition. periods of storage – leaving the The number after the “W” is the engine vulnerable to rust and high temperature flow rate of the oil. corrosion. The Joe Gibbs Hot Rod oil For example, while a 0W-30 flows creates a tenacious oil film that will better at start up than a 10W-30, cling to the part no matter how long both oils flow like a SAE 30 grade at it sits in storage. This oil films high temperature (212F). The higher prevents air and moisture from the number after the “W”, the attacking your engine.I heavier the oil is at higher temperature. A 5W-40 is a heavier oil Lake Speed Jr. from Joe Gibbs Racing is the son at high temperature than a 5W-30, so of Lake Speed Sr., who raced in NASCAR from SAE viscosity ratings only tell you 1980 to 1998.
Load more

Recommended publications
  • Preventing Catalytic Converter Thefts
    Ty Henshaw, Chief of Police IRWINDALE POLICE DEPARTMENT Preventing Catalytic Converter Thefts Catalytic converter thefts from vehicle exhaust systems continue to increase throughout the region. A catalytic converter is part of your car's exhaust system and is used to convert dangerous exhaust pollutants into less harmful emissions as they pass through your car's exhaust pipe. Catalytic converters have been required on all cars sold in the U.S since 1975. They don't seem very glamorous, but they are extremely attractive to thieves. The reason lies in the value of the metals used in the manufacturing of the converters. Catalytic converters contain platinum, rhodium, and palladium and their value to thieves across the nation has increased dramatically in recent years due to the black market resale value of these metals. Catalytic converters are relatively easy to steal and a skilled crook can remove one from a car in just a few minutes. Because they are concealed underneath the car, many owners do not even know their converter has been stolen until they notice the car running poorly and they hear a loud, rumbling exhaust noise. If you believe your car’s catalytic converter has been stolen, look under the car. The catalytic converter is a round canister that connects two pieces of the exhaust piping that runs from your engine to your tail pipe. If your converter has been taken, you'll see a gap or open space in the middle of the exhaust and you'll likely see evidence of the exhaust piping being cut away. Not only does the theft of a catalytic converter result in a poorly running vehicle, but it is also illegal to drive your car without one.
    [Show full text]
  • Applications of Lean Combustion to Reduce Emissions
    McNair Scholars Research Journal Volume 1 Article 6 2014 Applications of Lean Combustion to Reduce Emissions Narhari Khanal Embry-Riddle Aeronautical University Follow this and additional works at: https://commons.erau.edu/mcnair Recommended Citation Khanal, Narhari (2014) "Applications of Lean Combustion to Reduce Emissions," McNair Scholars Research Journal: Vol. 1 , Article 6. Available at: https://commons.erau.edu/mcnair/vol1/iss1/6 This Article is brought to you for free and open access by the Journals at Scholarly Commons. It has been accepted for inclusion in McNair Scholars Research Journal by an authorized administrator of Scholarly Commons. For more information, please contact [email protected]. Khanal: Applications of Lean Combustion to Reduce Emissions Khanal 1 Applications of Lean Combustion to Reduce Emissions Narhari Khanal Office of Mc-Nair Scholar Embry- Riddle Aeronautical University Daytona Beach, FL 12/02/2013 Published by Scholarly Commons, 2014 1 McNair Scholars Research Journal, Vol. 1 [2014], Art. 6 Khanal 2 Contents Acknowledgement:...................................................................................................................... 3 Abstract: ...................................................................................................................................... 4 Applications of lean combustion to reduce emissions .................................................................... 5 Introduction: ...............................................................................................................................
    [Show full text]
  • TECHNICAL SERVICE BULLETIN 2.0L Ecoboost
    Page 1 of 8 TECHNICAL SERVICE BULLETIN 19-2346 2.0L EcoBoost - Coolant In Cylinders, White Exhaust Smoke 19 December 2019 And/Or Illuminated MIL This bulletin supersedes 19-2208. Reason for update: Replace Awareness/Interim Message Model: Ford 2015-2018 Edge 2017-2019 Escape 2017-2019 Fusion Lincoln 2017-2019 MKC 2017-2019 MKZ Summary This article supersedes TSB 19-2208 to update the parts list. Issue: Some 2015-2018 Edge and 2017-2019 Fusion/MKZ/Escape/MKC vehicles equipped with a 2.0L EcoBoost engine may exhibit a low coolant level, white exhaust smoke and/or a runs rough condition with or without an illuminated malfunction indicator lamp (MIL). Diagnostic trouble codes (DTCs) may include P0300, P0301-P0304, P0316, P0217, P1285 and/or P1299 stored in powertrain control module (PCM). This may be due to coolant intrusion into the cylinder. To correct the condition, follow the Service Procedure steps to replace the long block engine assembly. Action: Follow the Service Procedure steps to correct the condition on vehicles that meet all of the following criteria: • One of the following vehicles: - 2015-2018 Edge - 2017-2019 Fusion/MKZ built on or before 8-Apr-2019 - 2017-2019 Escape built on or before 16-May-2019 - 2017-2019 MKC built on or before 18-Apr-2019 • 2.0L EcoBoost engine • Presence of coolant in the engine cylinders, white exhaust smoke and/or a runs rough condition with or without an illuminated MIL NOTE: Part availability for this TSB is initially limited and Dealers may experience temporary backorders that will be filled as quickly as possible.
    [Show full text]
  • The Influence of the Exhaust System Leak on the Operating Parameters of a Turbocharged Spark Ignition Engine
    I Eksploatacja i testy Krystian HENNEK, Mariusz GRABA THE INFLUENCE OF THE EXHAUST SYSTEM LEAK ON THE OPERATING PARAMETERS OF A TURBOCHARGED SPARK IGNITION ENGINE Turbocharging of an internal combustion engine is the most common technique to improve an engines’ performance. In present it is not hard to meet vehicles on the road with turbocharged SI engines, which have a high mileage, and because of this fact there is a high risk of exhaust systems leak. This might have its influence not only on the emissions, but also on the vehicles performance. Thereby this dissertation shows the comparative analysis of the influence of exhaust system leak in the catalyzer input on the exhaust gasses composition in the catalyzer output and the operation parameters of an turbocharged SI engine. During the research some parameters were recorded and compared, e. g.: the engines power and torque, the injectors opening time, the oxygen sensors voltage signals in the input and in the output of the catalyzer, the concentration of harmful gasses in the exhaust tailpipe. The research was conducted with the use of a single roller MAHA MSR 500 chassis dynamome- ter. A series of torque measurements was performed. Under these measurements a simulation of the exhaust system leakage of a turbocharged SI passenger car engine was made. As a result three variations of the wideband oxygen sensor acting were reached. The wideband sensor is mounted between the turbocharger unit and the input of the catalyzer. In the test the influence of the leakage on the injector’s opening time and the composition of harmful exhaust substances were pointed.
    [Show full text]
  • Clean Air Facts
    CClleeaann AAiirr FFaaccttss The Catalytic Converter: Technology for Clean Air Overview The catalytic converter has been the centerpiece of mobile source emission control throughout the world. Since the mid-1970s, catalysts equipped on passenger cars, from the first two-way oxidation catalysts to today's advanced three-way catalysts, have cut pollution by more than 10 billion tons in the U.S. Catalyst technology frequently has been hailed as one of the great automotive engineering achievements. Catalytic converters have been developed for use on trucks, buses, and motorcycles, as well as on construction equipment, lawn and garden equipment, and other non-road engines. The technology has been used on vehicles and equipment fueled with gasoline, diesel, propane, and natural gas. The History of the Automotive Catalyst • When strict vehicle emission standards were first set in the Clean Air Act Amendments of 1970, automakers did not possess the technology to significantly lower vehicle emissions. Catalytic converters for automobiles were developed to meet the standards set by the U.S. Congress. • Catalytic converters, or “catalysts,” were first installed on cars in the mid-1970s. • Over the past 30 years, catalyst technology has continued to advance to meet increasingly tighter emissions standards and greater durability requirements. How a Catalytic Converter Works • First generation catalytic converters, called “two-way converters,” only controlled carbon monoxide (CO) and hydrocarbon (HC) emissions. • In the early 1980s, catalysts were introduced that could control nitrogen oxides (NOx), in addition to controlling CO and HC. All cars sold in the U.S. today are equipped with this type of catalytic converter, called a three-way converter.
    [Show full text]
  • Emission Performance of California and Federal Aftermarket TWC Converters Rasto Brezny and Joseph Kubsh Manufacturers of Emission Controls Association
    2013-01-1298 Emission Performance of California and Federal Aftermarket TWC Converters Rasto Brezny and Joseph Kubsh Manufacturers of Emission Controls Association Copyright © 2012 SAE International ABSTRACT represents 120,000 miles (for some California-certified Partial Zero Emission Vehicle (PZEV) vehicles, the useful life is 150,000 miles). Original equipment (OE) catalytic converters are designed to last the life of properly tuned and maintained vehicles. Many high mileage vehicles require a replacement converter because Due to the high durability requirements necessary to last the the original catalyst was damaged, destroyed, or removed, and full useful life (FUL) of a vehicle, the OE catalysts must use the cost of a new OE converter on an older vehicle is difficult high levels of precious metals and other expensive materials. to justify. In the U.S., a federal aftermarket converter program Over time, however, the emission reduction effectiveness of has been in place since 1986 (California in 1988) and it has an OE catalytic converter may be severely degraded or even resulted in the replacement of over 50 million converters. completely destroyed. Excessive vibration or shock, excessive Both Federal and California programs have required heat, lack of proper vehicle maintenance, or improper vehicle aftermarket converters to meet minimum performance and operation can cause catalyst failures. Contaminants from durability standards. lubricating oil such as phosphorus, calcium and zinc have been found to poison catalysts over time [1]. In addition, converters can be structurally damaged in accidents or if the Increasingly tighter emission standards and durability vehicle hits an obstruction such as a large rock or debris on the requirements for new light-duty vehicles have resulted in road.
    [Show full text]
  • Decomposition of N2O Over Ru/Fe/Al2o3 Catalyst Nanoparticles Gaston O
    Decomposition of N2O over Ru/Fe/Al2O3 catalyst nanoparticles Gaston O. Larrazabal Particle Technology Laboratory, Department of Mechanical and Process Engineering, ETH Zurich, 8092 Zurich, Switzerland Report handed in on December 23, 2011 Supervisor: Dr. Robert Büchel Abstract. As the third-largest greenhouse gas and the most important ozone-depleting substance, nitrous oxide (N2O) represents a significant environmental issue. In this work, the catalytic activity towards N2O decomposition of six different Ru/Fe/Al2O3 nanoparticle powders synthesized by flame spray pyrolysis (FSP) was investigated. The powders were characterized by X-ray diffraction and N2 adsorption with the BET method. The catalytic tests were conducted with a feed of N2O dissolved in helium in a tubular fixed bed reactor. The prepared powders were found to have a BET specific surface area of approximately 170 g/m2. The prepared powders were catalytically active in the direct decomposition of N2O; 50% conversion of N2O was achieved at approximately 380 °C with the best-performing catalyst. The activity of the catalysts improved as the content of ruthenium increased until 2 wt%, after this point no improvement of the activity with higher Ru content was observed. The addition of iron when Ru was already present did not result in any improvement of the catalyst performance under the studied conditions compared to a Ru-only sample, however, a Fe/Al2O3 powder was found to shift the decomposition of N2O towards lower temperatures compared to the spontaneous thermal decomposition. 1. INTRODUCTION Nitrous oxide (N2O) is very harmful to the environment. It is the third most important greenhouse gas after carbon dioxide and methane: in 2004, nitrous oxide accounted for 7.9% of total greenhouse gas 1 (GHG) emissions in the world on a CO2-equivalent basis .
    [Show full text]
  • Catalytic Converter Theft Information Bulletin
    CATALYTIC CONVERTER THEFT INFORMATION BULLETIN FRANKLIN-BINGHAM FARMS POLICE DEPARTMENT Crime Prevention Bureau (248) 626-9672 WHAT IS A CATALYTIC CONVERTER? A catalytic converter is an air pollution abatement device that removes pollutants from motor vehicle exhaust, either by oxidizing them into carbon dioxide and water or reducing them into nitrogen and oxygen. The catalytic converter device uses a catalyst to convert three harmful compounds in the car exhaust into harmless compounds. The three compounds are: -Hydrocarbons -Carbon monoxide -Nitrogen oxides In a catalytic converter, the catalyst (in the form of platinum and palladium) is coated onto a ceramic honeycomb or ceramic beads that are housed in a muffler-like package attached to the exhaust pipe. The catalyst helps to convert carbon monoxide into carbon dioxide. It converts the hydrocarbons into carbon dioxide and water. It also converts the nitrogen oxides back into nitrogen and oxygen. PHOTO FROM “HOW IT WORKS.COM” WHY ARE CATALYTIC CONVERTERS POPULAR WITH THIEVES? Converters use the metals Platinum and Palladium as the catalyst. Both of these metals are extremely expensive and provide for high reward versus the risk in committing the theft. Per CNNMONEY.COM, on 03/04/10: Gold sold for $1,133.10 per troy ounce while Platinum sold for $1,582.40 per troy ounce. 2 WHAT DO CATALYTIC CONVERTERS LOOK LIKE? The following are some very basic photos of converters: Attached Catalytic Converter Unit Catalytic Converter Unit Oxygen Sensors The converter is between the exhaust system and the engine and is normally in front of the middle of the vehicle.
    [Show full text]
  • Diesel Particulate Filter: Exhaust Aftertreatment for the Reduction of Soot Emissions
    Engine technology Diesel Particulate Filter: Exhaust aftertreatment for the reduction of soot emissions Authors: A diesel particulate filter (DPF) can remove virtually all the soot particulates (PM) from the exhaust gas emitted from a diesel engine to ensure compliance with very strict emission Guido Schäffner standards. Regardless of the actual emission limit, diesel particulate filters satisfy the Design Exhaust Aftertreatment needs of operators who place importance on achieving extremely low soot emissions. Klaus Rusch Diesel particulate filters mean less soot oxides when internal engine measures are Design Exhaust Aftertreatment The emission regulations for diesel engines are used — if fewer soot particulates are produced becoming increasingly stricter worldwide, during the combustion process, the quantity of Dr. Daniel Chatterjee which makes modifications to the drive systems nitrogen oxides increases, and vice versa. In Pre-Development Exhaust Aftertreatment necessary. As a basic principle, MTU’s ap- situations where emission requirements are proach to achieve compliance is to reduce very strict, therefore, adding a diesel particu - Dr. Günter Zitzler emission levels by means of internal engine late filter is necessary, since it removes Thermodynamics and Turbocharging Systems enhancements. Depending on the specific 90 percent or more of the soot particulates emission limits, it may be possible to do with- from the exhaust. out a diesel particulate filter altogether. Howev- er, there is a relationship between the For example, very stringent emission limits are production of soot particulates and nitrogen due to come into force for diesel locomotives in www.mtu-online.com Europe as of 2012. The EU Stage IIIB standard lowers the limit for particulate matter emissions Fig.
    [Show full text]
  • Catalytic Converters for Vehicle Exhaust: Fundamental Aspects and Technology Overview for Newcomers to the Field
    Review Catalytic Converters for Vehicle Exhaust: Fundamental Aspects and Technology Overview for Newcomers to the Field Emmy Kritsanaviparkporn 1, Francisco M. Baena-Moreno 1,2,* and T. R. Reina 1,* 1 Department of Chemical and Process Engineering, University of Surrey, Guildford GU2 7XH, UK; [email protected] 2 Chemical and Environmental Engineering Department, Technical School of Engineering, University of Seville, C/Camino de los Descubrimientos s/n, 41092 Sevilla, Spain * Correspondence: [email protected] (F.M.B.-M.); [email protected] (T.R.R.) Abstract: This works aims to provide an understanding on basic chemical kinetics pertaining to three-way catalytic (TWC) converters from an educational perspective, aimed at those novel readers in this field. Rate of reactions and its factors are explained, showcasing that the chosen catalyst is the main factor affecting the overall rate of reaction. Furthermore, this overview revisit insights of the catalytic converter structure and the environmental issues that come along with it. Lastly, the chemical and physical properties of the reactants and products-pollutant and less-toxic gases—are discussed, in order to gather a better understanding of the reactants and products that enters a catalytic converter. Keywords: catalytic convertes; emissions; overview; catalysis Citation: Kritsanaviparkporn, E.; Baena-Moreno, F.M.; Reina, T.R. Catalytic Converters for Vehicle 1. Introduction Exhaust: Fundamental Aspects and The use of fossil fuels in the transport sector has increased the greenhouse gas (GHG) Technology Overview for Newcomers emissions during the last decades [1,2]. Fossil transport fuels such as gasoline or diesel to the Field. Chemistry 2021, 3, release exhaust gases composed by carbon dioxide (CO2), methane (CH4), nitrous oxide 630–646.
    [Show full text]
  • NSCR, SCR Systems Reduce Emissions
    page 117-118.qxp 5/23/2007 2:54 PM Page 117 MAY 2007 The “Better Business” Publication Serving the Exploration / Drilling / Production Industry NSCR, SCR Systems Reduce Emissions By Wilson Chu can be particularly challenging because gine cycles between rich- and lean-burn of the vast array of applications, with dif- such that the three-way catalyst converts MALVERN, PA.–The implementation ferent duty cycles, durability demands, CO and hydrocarbons during one cycle, of the federal government’s new source packaging constraints and regulatory re- and converts the NOx on the other cycle. performance standards (NSPS) and even quirements. Some catalysts even contain materials stricter regulations in some air quality dis- However, reliable solutions are available that store oxygen during the lean cycle tricts administered by state and local gov- for both rich- and lean-burn stationary en- for release during the rich cycle. ernments are significantly tightening con- gines that provide high conversion efficien- Stationary gas compression engines trol requirements on exhaust emissions cies to reduce emissions of CO, hydrocar- usually are not as sophisticated as auto- from stationary sources. bons, VOCs, HAPs, NOx, and where mobile engines. For instance, the air/fuel Emissions control from stationary en- applicable, particulate matter. Although ratio controllers on stationary natural gines has been mandated to varying degrees lean-burn engines may offer operational ad- gas-fired engines typically have a single over the years, depending on factors such vantages to the owner, such as improved fuel oxygen sensor. However, the basic oper- as engine size, location, site limits, operat- efficiency, compared to a rich-burn design, ation of the three-way converter essen- ing hours, annual emissions rates, and re- the cost to install emissions control can be tially is the same.
    [Show full text]
  • Diesel Catalytic Converters As Emission Control Devices
    DIESEL CATALYTIC CONVERTERS AS EMISSION CONTROL DEVICES Sanaa el Banna and Osama Nour el Deen *EGPC ** Ministry of Petroleum 1. INTRODUCTION; Internal combustion engines are devices that generate work from combustion reactions. Combustion products under high pressure produce work by expansion through a turbine or piston. The combustion reactions inside these engines are not necessarily neutralizing or complete and air pollutants are produced. There are three major types of internal combustion engine"' in use today: !) the spark ignition engine, which is used primarily in automobiles; 2) the diesel engine, which is used in large vehicles and industrial systems where cycle efficiency offers advantages over the more compact and lighter-weight spark ignition engine and; 3) the gas turbine, which is used in aircraft due to its high power/weight ratio and is also used for stationary power generation. Each of these types of engine is an important source of atmospheric pollutants. Automobiles are the one of the major source of carbon monoxide, unbumed hydrocarbons, and nitrogen oxides. Probably more than any other combustion system, the design of automobile engines is now being guided by requirements to reduce emissions of these pollutants. While substantial progress has been made in emission reduction, automobiles remain important sources of air pollutants. TESCE, Vol. 30, No.2 <&> December 2004 In order to reduce emissions, modem cars have been designed to carefully control the amount of fuel they bum. The goal is to keep the air-to-fuel ratio very close to the "stoichiometric" point, which is the calculated ideal ratio of air to fuel. Theoretically, at this ratio, all of the fuel will be burned using all of the oxygen in the air.
    [Show full text]