Make Dust History Protect the Tools You Can’T Replace

MOVE TOWARD OSHA COMPLIANCE WITH PRO+GUARD™ MAKE DUST DUST SOLUTIONS HISTORY

REFERENCE GUIDE: DUST SOLUTIONS FOR CONCRETE DRILLING DEMOLITION, GRINDING AND CUTTING MAKE DUST HISTORY PROTECT THE TOOLS YOU CAN’T REPLACE

Move Towards OSHA Compliance with Bosch PRO+GUARD™ Dust Solutions

• Largest selection of dust solutions • Speed Clean™ bits are code approved and meet OSHA standards • Engineered for maximum dust removal • Best-in-class dust extraction

Visit boschtools.com/PROGUARD for more information.

*According to CPWR (http://www.silica-safe.org/know-the-hazard/take-action) © Robert Bosch Tool Corporation. TABLE OF CONTENTS

OSHA COMPLIANT DUST SOLUTIONS FOR CONCRETE DRILLING, DEMOLITION, GRINDING AND CUTTING

PRO+GUARD™ Dust Solutions 4‒5

Dangers of Silica Exposure 6

OSHA Silica Standard 7

Concrete Dust Solutions 9

Concrete Drilling & Anchoring 10–11

Concrete Chiseling & Demolition 12–13

Concrete Surface Grinding 14

Masonry Tuckpointing 15

Concrete Cutting 16–17 TABLE OF CONTENTS OF TABLE

Dust Extractors, Filters and Extractor Attachments 18‒21

OSHA 1926.1153 Table 1 Silica Regulations for Power Tools 22

Bosch to Fastenal® SKU Conversion List 23

No Dust Collection With PRO+GUARD™ Dust Collection

3 MAKE DUST HISTORY The updated OSHA silica regulation requires employers to limit their employees’ exposure to respirable crystalline silica dust to 50 μg/m3 or lower, averaged over an eight-hour day.

OSHA REGULATIONS ARE COMING, WEʼLL HELP YOU GET READY!

DUST COLLECTION With the largest product lineup in the industry, Bosch PRO+GUARD™ dust solutions will allow you to move towards compliance and increase your productivity.

LARGEST SELECTION Largest selection of dust solutions by application

HIGHLY EFFECTIVE Most dust removal per application

BEST-IN-CLASS DUST EXTRACTORS Consistent suction power to reach compliance

4 BOSCHTOOLS.COM REFERENCE GUIDE: DUST SOLUTIONS FOR CONCRETE 877-BOSCH-99 DRILLING DEMOLITION, GRINDING AND CUTTING WEʼVE GOT YOUR BACK Bosch PRO+GUARD™ Protection System

Whether you are concerned about the health of your employees, your health, compliance or increasing productivity, Bosch has developed PRO+GUARD™ protection systems.

MAXIMIZE PERFORMANCE Bosch dust collection systems can boost your overall productivity with proven products like our Speed Clean™ dust extraction drill bits. When using these bits to set adhesive anchors, you can reduce installation time by up to 50%. CONCRETE GET COMPLIANT When using the correct setup and following manufacturer's instructions, Bosch dust collection systems help keep the air cleaner by using HEPA filters that capture more than 99.97% of dust particles 0.3 microns and larger.

PROTECT YOURSELF & OTHERS According to health experts, inhaling dust containing silica in some instances may cause silicosis, lung cancer, COPD and other debilitating diseases. Bosch dust collection systems can reduce airborne dust, helping to create a safer and healthier working environment.

5 DANGERS OF SILICA EXPOSURE BREATHE EASIER The Center for Construction Research and Training explains the danger of silica exposure.

WHAT IS CRYSTALLINE SILICA? Silica, often referred to as quartz, is a very common mineral. It is found in many materials common on construction sites, including soil, sand, concrete, masonry, rock, granite, and landscaping materials. The dust created by cutting, grinding, drilling or otherwise disturbing these materials can contain crystalline silica particles. These dust particles are very small and invisible to the naked eye. When inhaled, even in very small amounts, silica dust can cause serious health hazards. Each exposure to silica adds to the lung damage.

WHAT IS SILICOSIS? Silicosis is a disabling, irreversible, and sometimes fatal lung disease. When a worker inhales crystalline silica, the lungs react by developing hard nodules and scarring around the trapped silica particles. If the nodules become too large, breathing becomes difficult and death can result. There is no cure for this disease, but it is 100% preventable.

DUST COLLECTION ARE YOU AT RISK? If you do the following to concrete, mortar, sand, rock, masonry and some paints:

ff Cut or saw ff Jackhammer ff Grind ff Crush or demolish ff Drill ff Abrasive or sand blast Then the answer is YES!

WHY IT’S DEADLY Inhaling crystalline silica can lead to serious, sometimes fatal illnesses including silicosis, lung cancer, tuberculosis (in those with silicosis), and chronic obstructive pulmonary disease (COPD). In addition, silica exposure has been linked to other illnesses including renal disease and other cancers. In 1996, the World Health Organization — International Agency on Cancer Research (IARC) identified crystalline silica as a “known human carcinogen” (they reaffirmed this position in 2009). The American Thoracic Society and the American College of Occupational and Environmental Medicine have also recognized the adverse health effects of exposure to crystalline silica, including lung cancer.

FOR MORE INFORMATION REGARDING SILICA EXPOSURE OR OSHA RULINGS, PLEASE VISIT CPWR’S WEBSITE SILICA-SAFE.ORG

6 BOSCHTOOLS.COM REFERENCE GUIDE: DUST SOLUTIONS FOR CONCRETE 877-BOSCH-99 DRILLING DEMOLITION, GRINDING AND CUTTING OSHA SILICA STANDARD

PROTECT YOURSELF & YOUR EMPLOYEES The Occupational Safety and Health Administration (OSHA) has issued a final rule to curb lung cancer, silicosis, chronic obstructive pulmonary disease and kidney disease in Americaʼs workers by limiting their exposure to respirable crystalline silica.

ENSURE JOBSITE COMPLIANCE According to OSHAʼs website, the good news is that silicosis is 100% preventable! While using power tools with a dust attachment/accessory and dust extractors with the right filter, exposure to silica can be drastically reduced.

KEY PROVISIONS ff Reduces the permissible limit (PEL) to 50 μg/m3 (micrograms of silica per cubic meter of air), averaged over an eight-hour day. ff Requires employers to use: –Engineering controls (such as water or ventilation) to limit worker exposure to respirable silica dust to the PEL –Provide respirators when engineering controls cannot adequately limit exposure –Limit worker access to high exposure areas –Develop a written exposure control plan –Train workers on silica risks and how to limit exposures CONCRETE –Provide medical exams to monitor highly exposed workers and gives them information about their lung health ff Establish and implement a written exposure control plan to identify tasks that involve exposure and methods used to protect workers, including procedures to restrict access to work areas where high exposures may occur. Also, employers need to designate a competent person to implement the written exposure control plan. ff Provides flexibility to help employers — especially small businesses — protect workers from silica exposure.

The new standard went into effect on June 23, 2016, and employers are required to comply with all obligations of the standard. OSHA enforcement dates differ by state and can be referenced by visiting https://www.osha.gov/dcsp/osp/index.html. If your state does not have their own state plan, OSHA federal silica regulations will apply.

7 CONCRETE DUST SOLUTIONS CONCRETE DUST SOLUTIONS

In order to move toward compliancy and protection, it is critical that every component in the system is designed to effectively remove dust. Outside of respiration, Bosch produces effective dust collection solutions to help you.

TOOL 1. C hoose the tool that Dust collection systems are available for Bosch grinders, hammers and hammer drills, best fits your needs routers, jig saws, circular saws, miter saws, table saws, sanders and planers.

ATTACHMENT 2. Identify the correct Bosch dust collection attachments are attachment that fits custom engineered to provide maximum your tool performance while preserving the full functionality of the tool. CONCRETE

CONNECTIONS CHOOSING THE Bosch dust collection connections offer a secure fit from tool to vacuum through a RIGHT SYSTEM variety of hoses and adapters.

DUST EXTRACTORS 3. Choose a HEPA ready Use a professional dust extractor. Bosch dust extractor with dust extractors are rated as high as 150 CFM the highest CFM and (cubic feet per minute), with some offering meets EPA guidelines features such as HEPA filtration and automatic filter cleaning.

RESPIRATION 4. Determine the Respirators protect you by filtering respirator for your contaminants the user breathes. If needed application (refer to for the application you are performing, respirators of this type include particulate the OSHA Table 1)* respirators, which filter out airborne particles, APF 10 shown and air-purifying respirators with cartridges/ For suggested respiratory protection and 3M™ Rugged Comfort™ other personal protective equipment, go to Half Face Respirator canisters which filter out chemicals and gases. 3M.com/OSHASilica 6500 Series

*OSHA Rule 1926.1153 Table 1

9 CONCRETE DRILLING & ANCHORING

BASED ON OSHA SILICA TABLE 1 — DRY DRILLING WITH HANDHELD AND STAND-MOUNTED DRILLS (Including Impact and Rotary Hammer Drills)

DUST SOLUTIONS ff Largest range of OSHA Code approved drilling solutions available ff Largest drilling selection ff Most dust removal per application

CHOOSING THE RIGHT SYSTEM Filter & Dust OSHA Silica Find Your Tool Attachment or Accessory Respiration Extractor Compliant◊ Hammer Drill

CONCRETE DRILLING & ANCHORING & CONCRETE DRILLING Yes

1191VSR, HD18-2, HD19-2, HD21-2 HDC200 18V HDS181A, HDS183, HDH181, HDH183 SDS-plus® Anchoring Speed Clean™ Hammers Applications SDS-plus®: HCD2074, HCD2084, HCD2094, DXS2104, DXS2114, DXS2124, DXSplus OR 11253VSR, 11255VSR, GBH2-26, Universal HDC200 Yes 3/4" ‒ 1-1/8" RH228VC, GBH2-28L, RH328VC, Attachment Bulldog™ RH328VCQ None 18V RHH181, GBH18V-20, GBH18V-26** 36V 11536VSR, 11536-C, RH328VC-36 1-1/4" RH432VCQ OR SDS-plus® HDC100 All the above SDS-plus® hammers only except RH432VCQ VAC090A*, SDS-max® Anchoring Speed Clean™ VAC090AH*, & Spline Applications SDS-max®: VAC140A*, Hammers DXS5034, VAC140AH* DXS5048, DXS5044, DXS5054, Yes 11264EVS, 11265EVS, 11263EVS, DXS5062, 11245EVS, RH540M, RH850VC, DXS5082 OR RH540S, RH745, RH1255VC Universal HDC200, Dust HDC250 Extraction

*Bosch recommends using a HEPA filter (VF120H or VF130H) when using a fleece bag **When used with the GDE18V-16 a dust extractor is not needed ◊ See page 21 ▶ See page 23 for Bosch to Fastenal® SKU conversion list

10 BOSCHTOOLS.COM REFERENCE GUIDE: DUST SOLUTIONS FOR CONCRETE 877-BOSCH-99 DRILLING DEMOLITION, GRINDING AND CUTTING SDS-plus® ATTACHMENT AND ADAPTER DUST EXTRACTION ATTACHMENT 18V HEPA DUST COLLECTOR ff Attaches to tool and vacuum cleaner hose to provide excellent ATTACHMENT dust collection when drilling in dust-sensitive areas, such as ff For use with GBH18V-26 18V Bulldog™ Rotary computer rooms and medical facilities Hammer and provides excellent dust collection ff For use with bits up to 3/4" in diameter for extracting fine dust through an Auto-Power-On feature. When drilling, ff Built-in depth gauge the suction automatically turns on and 2 seconds ff For use with most Bosch SDS-plus® of overrun after releasing hammer trigger rotary hammers ff Removable Dust Container with ff Compatible with: HEPA filter - Bulldog™: 11253VSR, 11255VSR, ff Max. Drill Bit Length – 6.5"; RH226, RH228VC, Max. Drilling Depth – 3.9" GBH2-28L, RH328VC, ff Includes (2) end nozzles RH328VCQ - 18V: RH181, GBH18V-20, GBH18V-26 - 36V: 11536VSR, 11536-C, RH328VC-36 Item # Description Item # Description GDE18V-16 18V HEPA dust collector attachment HDC100 SDS-plus® depth control dust extraction unit DF18V-16 Replacement HEPA Filter

UNIVERSAL DUST EXTRACTION ATTACHMENTS HAMMER DRILLING DUST EXTRACTION ATTACHMENTS ff Dust extraction attachments for drilling holes in concrete and masonry ff Can be used with a wide variety of drill bit diameters and bit lengths ff For use with Bosch SDS-max® or SDS-plus® combination/rotary hammer ff Includes adapter VAC020

Item # Description Optimized for 1/4"–1-3/8" diameter. HDC200 Maximum hole diameter is 2-5/8"* CONCRETE DRILLING & ANCHORING & CONCRETE DRILLING Optimized for 2-1/4"–5" diameter. HDC250 Maximum hole diameter is 6"* HDC200 HDC250 *Brush ring needs to be removed

SPEED CLEAN™ DUST EXTRACTION BITS SDS-plus® SPEED CLEAN™ SDS-max® SPEED CLEAN™ DUST EXTRACTION DRILL BITS* DUST EXTRACTION DRILL BITS*

Item # Diameter Usable Length Overall Length Qty. Item # Diameter Usable Length Overall Length Qty. HCD2074† 7/16" 7-1/2" 13" 1 DXS5034 3/4" 12-1/2" 21" 1 HCD2084† 1/2" 7-1/2" 13" 1 DXS5048 13/16" 15" 25" 1 HCD2094† 9/16" 10" 15" 1 DXS5044 7/8" 15" 25" 1 DXS2104 5/8" 10" 15" 1 DXS5054 1" 17-1/2" 27" 1 DXS2114 11/16" 12-1/2" 18" 1 DXS5062 1-1/8" 20" 29" 1 DXS2124 3/4" 12-1/2" 18" 1 DXS5082 1-3/8" 25" 34" 1 *All come with DXSPLUS adapter *All come with DXSMAX adapter

SDS-plus® SPEED CLEAN™ ADAPTER SDS-max® SPEED CLEAN™ ADAPTER

Item # Description Item # Description Rubber adapter connecting SDS-plus® Speed Clean™ Rubber adapter connecting SDS-max® Speed Clean™ DXSPLUS dust extraction bits to standard 35mm diameter DXSMAX dust extraction bits to standard 35mm diameter vacuum hose vacuum hose

▶ See page 23 for Bosch to Fastenal® SKU conversion list

11 CONCRETE CHISELING & DEMOLITION

BASED ON OSHA SILICA TABLE 1 — DRY CHISELING/ DEMOLITION WITH JACKHAMMERS AND HANDHELD POWERED CHIPPING TOOLS

DUST SOLUTIONS ff Largest range of chipping and demolition dust solutions available ff Most dust removal per application ff Best-in-class dust extraction

CHOOSING THE RIGHT SYSTEM Filter & Dust OSHA Silica Find Your Tool Attachment or Accessory Respiration Extractor Compliant◊ SDS-max and Spline Hammers CONCRETE CHISELING & DEMOLITION & CHISELING CONCRETE (Chisel Mode Only) • Needed Yes when used 11264EVS, 11265EVS, HDC300 indoors 11263EVS, 11245EVS, • Needed RH540M, RH850VC, RH540S, when used RH745, RH1255VC outdoors Demolition >4 hours/ Hammers shift

Yes

11316EVS, 11321EVS, DH507, HDC300 DH712VC, DH1020VC APF 10* Demo/ (N95) Breaker Hammers or

VAC090A**, VAC090AH**, VAC140A**, Yes VAC140AH** RR 6500* (P95)

BH2770VC, BH2760VC, HDC400 11335K, DH1020VC

*3M™ Particulate Respirator 8210V & 3M™ Rugged Comfort™ Half Face Respirator 6500 Series shown. For suggested respiratory protection and other personal protective equipment, go to 3M.com/OSHASilica **Bosch recommends using a HEPA filter (VF120H or VF130H) when using a fleece bag ◊ See page 21

▶ See page 23 for Bosch to Fastenal® SKU conversion list

12 BOSCHTOOLS.COM REFERENCE GUIDE: DUST SOLUTIONS FOR CONCRETE 877-BOSCH-99 DRILLING DEMOLITION, GRINDING AND CUTTING CONCRETE CHISELING & DEMOLITION UNIVERSAL DUST EXTRACTION ATTACHMENTS CHISELING DUST EXTRACTION DEMO/BREAKER ATTACHMENT HAMMER DUST ff Dust extraction attachment for chiseling into concrete/masonry. EXTRACTION For best results, keep the attachment within 3" of the bit tip ATTACHMENT ff For use with Bosch SDS-max® or spline chisels and hammers ff Toolless Installation — Installs easily and quickly without additional tools ff Accommodates a variety of chisel lengths; easily change out chisels without removing the attachment Item # Description Hammer dust collection attachment for HDC400 demolition applications

Item # Includes HDC300 Extension tube and (3) adapter pieces CONCRETE CHISELING & DEMOLITION & CHISELING CONCRETE

▶ See page 23 for Bosch to Fastenal® SKU conversion list

13 CONCRETE SURFACE GRINDING

BASED ON OSHA SILICA TABLE 1 — HANDHELD GRINDERS FOR USES OTHER THAN MORTAR REMOVAL (I.E., CONCRETE SURFACING)

DUST SOLUTIONS ff Largest range of surface grinding dust solutions available ff Most dust and material removal ff Best-in-class dust extraction

CHOOSING THE RIGHT SYSTEM Attachment Filter & Dust OSHA Silica Find Your Tool Respiration or Accessory Extractor Compliant◊

CONCRETE SURFACE GRINDING CONCRETE SURFACE Concrete Surfacing

Not Required Yes

• Needed CSG15, 1773A when used 4-1/2"–5" indoors Grinders • Needed when used outdoors >4 hours/ Surfacing: shift 1821, 1821D, AG40-Series, AG50-Series, Yes 18SG-5E GWS10-45, GWS10-45P(D), GWS13-50, GWS13-50P(D), GWS13-50VS, GWS13-50VSP VAC090A***, VAC090AH***, 18V GWS18V-45CP, GWS18V45C VAC140A***, VAC140AH***

7" APF 10* Grinders (N95)

or Yes

1853-6, 1853-5, 1772-6, 1873-8(D), Surfacing: 1974-8, 1974-8D 18SG-7 Use dust extractor with 175+ CFM. 9" Grinders RR 6500* (P95)

Yes

Surfacing: 1994-6**, 1994-6D**, 1893-6**, 1894-6** 18SG-7

*3M™ Particulate Respirator 8210V & 3M™ Rugged Comfort™ Half Face Respirator 6500 Series shown. For suggested respiratory protection and other personal protective equipment, go to 3M.com/OSHASilica **9" grinders can only use a 7" disc and attachment ***Bosch recommends using a HEPA filter (VF120H or VF130H) when using a fleece bag ◊ See page 21

▶ See page 23 for Bosch to Fastenal® SKU conversion list

14 BOSCHTOOLS.COM REFERENCE GUIDE: DUST SOLUTIONS FOR CONCRETE 877-BOSCH-99 DRILLING DEMOLITION, GRINDING AND CUTTING MASONRY TUCKPOINTING

BASED ON OSHA SILICA TABLE 1 — HANDHELD GRINDERS FOR MORTAR REMOVAL (I.E., TUCKPOINTING)

DUST SOLUTIONS ff Largest range of tuckpointing solutions available ff Most dust and material removal ff Best-in-class dust extraction

CHOOSING THE RIGHT SYSTEM Attachment Filter & Dust OSHA Silica Find Your Tool Respiration or Accessory Extractor Compliant◊

Tuckpointer MASONRY TUCKPOINTING

Not Required Yes • ≤4 hours/ shift 1775E, AG50-10TG 4-1/2"–5" Grinders

RR 6500* (P95) Yes 1821, 1821D, AG40-Series, AG50-Series, Cutting: GWS10-45, GWS10-45P(D), GWS13-50, 18DC-5E or • >4 hours/ GWS13-50P(D), GWS13-50VS, GWS13-50VSP GA50DC shift 18V GWS18V-45CP, GWS18V45C 6" Grinders

APF 25* VAC090A**, Yes VAC090AH**, VAC140A**, 1806E, 1812PSD, AG60-125, AG60-125PD, 18DC-6E VAC140AH** GWS13-60(PD)

*APF 10 – 3M™ Rugged Comfort™ Half Face Respirator 6500 Series and the APF25 – 3M™ Versaflo™ PAPR Respiratory System with Hardhat Assembly M-307 shown. For suggested respiratory protection and other personal protective equipment, go to 3M.com/OSHASilica **Bosch recommends using a HEPA filter (VF120H or VF130H) when using a fleece bag ◊ See page 21

▶ See page 23 for Bosch to Fastenal® SKU conversion list

15 CONCRETE CUTTING

BASED ON OSHA SILICA TABLE 1 — HANDHELD GRINDERS FOR USES OTHER THAN MORTAR REMOVAL (I.E., CONCRETE CUTTING)

DUST SOLUTIONS ff Largest range of dry concrete cutting solutions available ff Most dust and material removal per application ff Best-in-class dust extraction

CHOOSING THE RIGHT SYSTEM Attachment Filter & OSHA Silica Find Your Tool Respiration or Accessory Dust Extractor Compliant◊ 4-1/2"–5" Grinders CONCRETE CUTTING

Yes • Needed when used 1821, 1821D, AG40-Series, AG50-Series, Cutting: 18DC-5E indoors GWS10-45, GWS10-45P(D), GWS13-50,w or GA50DC GWS13-50P(D), GWS13-50VS, GWS13-50VSP, • Needed GWS18V-45CP, GWS18V45C when used 6" Grinders outdoors >4 hours/ shift

Yes VAC090A**, VAC090AH**, 1806E, 1812PSD, AG60-125, VAC140A**, AG60-125PD, GWS13-60(PD) VAC140AH** Cutting: 18DC-6E APF 10* (N95) 7" Grinders or

Use dust extractor Yes with 175+ CFM

Cutting: 19DC-7 1853-6, 1853-5, 1772-6, 1873-8(D) RR 6500* (P95) 9" Grinders

Use dust extractor with 225+ CFM Yes

1893-6, 1894-6 Cutting: 19DC-9

▶ See page 23 for Bosch to Fastenal® SKU conversion list

16 BOSCHTOOLS.COM REFERENCE GUIDE: DUST SOLUTIONS FOR CONCRETE 877-BOSCH-99 DRILLING DEMOLITION, GRINDING AND CUTTING ATTACHMENTS CUTTING/DUST COLLECTION ATTACHMENTS

Type 1A (ISO 41) GA50DC Type 1A (ISO41) with Foot with Foot

Item # Description Item # Description 5" dust collection attachment compatible with 19DC-7 7" attachment 18DC-5E GWS series, AG series and 1800 series 4-1/2" 19DC-9 9" attachment and 5" small angle grinders 1605510215* 12" attachment 6" dust collection attachment compatible with *For use with models 1364 and 1364K only 18DC-6E GWS series, AG series and 1800 series 6" small angle grinders 5" guard compatible with all GWS series, AG GA50DC series and 1800 series 5" small angle grinders

SURFACING/DUST COLLECTION ATTACHMENTS CONCRETE CUTTING Item # Description 5" concrete surfacing attachment for use with 18SG-5E all GWS series, AG series and 1800 series 4-1/2" 5" Shroud and 5" small angle grinders

Item # Description No Dust Collection 7" concrete surfacing attachment for use with 18SG-7 1853-5, 1853-6, 1873-6, 1873-8, 1873-8D, 1893-6 7" Shroud and 1893-6D (only with 7" wheel), 1994-6 and 1994-6D (only with 7" wheel)

TUCKPOINTING ATTACHMENT

Item # Description TG500 5" tuckpointing attachment ― Fits 1775E only 5" dust collection attachment compatible with TG502 GWS series, AG series and 1800 series 4-1/2" and 5" tuckpoint attachment

With PRO+GUARD™ Dust Collection

▶ See page 23 for Bosch to Fastenal® SKU conversion list

17 DUST EXTRACTORS

AUTOMATIC FILTER CLEANING DUST EXTRACTOR WET*/DRY VAC SERIES

POWER TOOL EFFECTIVE DUST ACTIVATION EXTRACTION 150 CFM

AUTOMATIC FILTER EASY-TO-CHANGE CLEANING (AFC) FLAT FILTERS Every 15 seconds the flat pleated filter is cleaned through a reversed airflow DUST COLLECTION

POWER BROKER HOSE AND CORD For allocating power STORAGE between vacuum and ff Secure vacuum connected power tool; hose wrap also allows suction ff Power cord hook control for specialty applications

AUTOMATIC FILTER CLEANING

ON/OFF BUTTON

ROBUST WHEELS INDICATOR LIGHT ff Jobsite tested rear wheels ff No Light = Off ff Front caster with brake ff Green = On

*Water level sensor for automatic shut off. Drain / Hose (VAC140A, VAC140AH). Do not use HEPA filter when using wet vacuum setting. ▶ See page 23 for Bosch to Fastenal® SKU conversion list

18 BOSCHTOOLS.COM REFERENCE GUIDE: DUST SOLUTIONS FOR CONCRETE 877-BOSCH-99 DRILLING DEMOLITION, GRINDING AND CUTTING 9-GALLON DUST EXTRACTOR WITH 14-GALLON DUST EXTRACTOR WITH AUTO FILTER CLEANING/HEPA FILTER/ AUTO FILTER CLEANING/HEPA FILTER/ FLEECE FILTER BAG FLEECE FILTER BAG VAC090AH VAC140AH

ff Automatic Filter Cleaning — Cleans filter every 15 seconds to ff Automatic Filter Cleaning — Cleans filter every 15 seconds to maintain maximum suction power maintain maximum suction power ff Power Tool Activation — Allows power tool switch to turn vacuum ff Power Tool Activation — Allows power tool switch to turn vacuum on and off on and off ff Power Broker™ Dial — For allocating power between vacuum and ff Power Broker™ Dial — For allocating power between vacuum and connected power tool; also allows suction control for specialty connected power tool; also allows suction control for specialty applications applications ff Rugged Wheels and Locking Caster — Built to withstand the ff Metal Frame, Rubber Wheels and Locking Caster — Built to demands of a jobsite withstand the demands of a jobsite

INCLUDES INCLUDES Fleece Filter Bag VB090F Fleece Filter Bag VB140F CONCRETE Anti-Static Bend Nozzle VX100 Anti-Static Bend Nozzle VX100 10 ft. Hose VH1035 10 ft. Hose VH1035 Power Tool Adapter Nozzle VX120 Power Tool Adapter Nozzle VX120 HEPA Filter HEPA Filter

Specifications Specifications Rating 120V Rating 120V Frequency 60 Hz Frequency 60 Hz Canister Volume (gross) 9.25 Canister Volume (gross) 14.5 Air Flow 150 CFM (70 ltr./sec.) Air Flow 150 CFM (70 ltr./sec.) Static Water Lift 97" Static Water Lift 97" No. of Filter Cartridges 1 No. of Filter Cartridges 1 Sound Pressure Level 71 db Sound Pressure Level 71 db Hose Length 10 ft. Hose Length 10 ft. Hose Port Inside Diameter 2-1/4" Hose Port Inside Diameter 2-1/4" Cord Length 16 ft. Cord Length 16 ft. Weight 28.0 lbs. Weight 38.0 lbs.

9-GALLON DUST EXTRACTOR 14-GALLON DUST EXTRACTOR WITH AUTO FILTER CLEANING* WITH AUTO FILTER CLEANING* VAC090A VAC140A

Same features and specifications as Same features and specifications as VAC090AH above except: VAC140AH above except: Cellulose Flat Filter VF100 Cellulose Flat Filter VF100

* HEPA Filter sold separately. * HEPA Filter sold separately.

▶ See page 23 for Bosch to Fastenal® SKU conversion list

19 ATTACHMENTS AND ACCESSORIES FOR VAC SERIES FILTERS FILTER BAGS ff Each fits VAC090A, VAC090AH, VAC090S, VAC140A, VAC140AH ff Each fits VAC090A, VAC090AH, VAC090S, VAC140A, VAC140AH and VAC140S dust extractors, excluding DF18V-16 and VAC140S dust extractors ff A fleece filter bag (VB090F, VB090F-30, VB140F and VB140F-30) is recommended when using a HEPA filter

VF120H VF130H DF18V-16

Item # Description VB140 VB140F VF100 Flat paper (cellulose) filter VF110 Flat polyester filter VF120H Flat HEPA filter VF130H Extended life, flat HEPA filter Replacement HEPA filter for GDE18V-16 dust DF18V-16 collection attachment (see page 11) VB090F VB000P

Item # Description Quantity HOSES VB090 Paper filter bag — 9 gal. 5 ff Each fits VAC090A, VAC090S, VAC140A and VAC140S VB140 Paper filter bag — 14 gal. 5 dust extractors VB090F Fleece filter bag — 9 gal. 5 ff Not compatible with other dust extractors VB090F-30 Fleece filter bag — 9 gal. 30 ff These hoses connect many Bosch power tools and dust extraction VB140F Fleece filter bag — 14 gal. 5 attachments to Bosch VAC series dust extractors VB140F-03 Fleece filter bag — 14 gal. 30 ff VX120 power tool adapter is included VB090S Wet filter bag — 9–14 gal. 5 ff Anti-static hoses help prevent static shock and cling VB000P Disposable plastic bag — 9–14 gal. 10 DUST COLLECTION OTHER ff Fits VH series hoses ff Fits VX100 extension tube set VH1635 VH1022

Item # Description Item # Description VH1635 16 ft., 35mm hose VX100 Bend, anti-static VH1635A Anti-static 16 ft., 35mm hose VH1622A Anti-static 16 ft., 22mm hose VH1035 10 ft., 35mm hose VH1022 10 ft., 22mm hose

THREE-PIECE VACUUM EXTENSION TUBE SET FLOOR NOZZLE SET ff Fits VX100 Bend ff Fits VX110 extension tube set

Item # Description VX110 Three-piece chrome extension tube (3 ft. total length) Item # # of Pieces Includes Floor nozzle set with two inserts VX130 3 (bristles and squeegee) ADAPTER

Item # Description Connects VH hoses to tools that have ports for 35mm, VX120 22mm or 19mm hoses. Included with all VH hoses

▶ See page 23 for Bosch to Fastenal® SKU conversion list

20 BOSCHTOOLS.COM REFERENCE GUIDE: DUST SOLUTIONS FOR CONCRETE 877-BOSCH-99 DRILLING DEMOLITION, GRINDING AND CUTTING UNIVERSAL VACUUM HOSES AND HOSE ADAPTERS VACUUM HOSE ADAPTERS

Item # Description Item # Description Connects 1-1/4" and 1-1/2" hoses to some Connects 2-1/2" hoses to tools that have ports VAC020 VAC002 tools and attachments that have ports for for 35mm hoses 35mm, 22mm or 19mm hoses

Item # Description Item # Description Connects 2-1/2" hoses to certain miter saws, Connects 1-1/4" and 1-1/2" hoses to tools and 2605702022 planers and routers VAC024 attachments that have parts for 35mm, 22mm or 19mm hoses

Item # Description Connects 35mm hoses to tools that have ports VAC004 for 2-1/2" hoses

FRICTION-FIT VACUUM HOSE

ff Connect many Bosch power CONCRETE tools and dust extraction hood attachments to vacuum cleaners that have openings for standard 2-1/4" hoses ff Standard 2-1/4" friction fit

Item # Description VAC005 35mm, 16.4 ft. swivels at both ends of hose

▶ See page 23 for Bosch to Fastenal® SKU conversion list

SILICA & OSHA REFERENCES https://www.osha.gov/dte/library/silicosis/si_con.html http://www.silica-safe.org https://www.osha.gov/silica/index.html https://www.osha.gov/silica/SilicaConstructionRegText.pdf https://www.osha.gov/SLTC/respiratoryprotection/index.html https://www.osha.gov/SLTC/wooddust/recognition.html

◊ All information cited was prepared by Robert Bosch Tool Corporation on December 1, 2016, which is to serve as a basic summary helping users generally understand the OSHA Respirable Crystalline Silica Rule for the construction industry. This is not an official, legal, safety-related or comprehensive interpretation of the rule; you should always rely on your own review and evaluation of the applicable rules and regulations and understand that it is the individual’s and/or employer’s obligation to comply with such rules. Also, there may be additional OSHA standards and OSHA-approved state programs that apply. When using the equipment shown in this guide as you strive to meet your required compliances, always use the tools in accordance with the ownerʼs manual and OSHA regulations. For official information, please go to https://www.osha.gov/silica/ and for the complete rule (including Table 1), please see https://www.osha.gov/silica/SilicaConstructionRegText.pdf.

21 OSHA 1926.1153 TABLE 1 SILICA REGULATIONS FOR POWER TOOLS

TABLE 1 — SPECIFIED EXPOSURE CONTROL METHODS WHEN WORKING WITH MATERIALS CONTAINING CRYSTALLINE SILICA

Required Respiratory Protection and Minimum Assigned Protection Factor (APF) Equipment/Task Engineering and Work Practice Control Methods ≤ 4 hours/shift > 4 hours/shift Handheld and Use drill equipped with commercially available shroud or None None Stand-Mounted cowling with dust collection system. Operate and maintain Drills (including tool in accordance with manufacturer's instructions to impact and rotary minimize dust emissions. Dust collector must provide the air hammer drills) flow recommended by the tool manufacturer, or greater, and have a filter with 99% or greater efficiency and a filter-cleaning mechanism. Use a HEPA-filtered vacuum when cleaning holes. Jackhammers Use tool equipped with commercially available shroud and dust and Handheld collection system. Operate and maintain tool in accordance Powered with manufacturer's instructions to minimize dust emissions. Chipping Tools Dust collector must provide the air flow recommended by the tool manufacturer, or greater, and have a filter with 99% or greater efficiency and a filter-cleaning mechanism. − When used outdoors. None APF 10 − When used indoors or in an enclosed area. APF 10 APF 10 Handheld Power For tasks performed outdoors only: Use saw equipped with None None Saws for Cutting commercially available dust collection system. Operate and Fibercement maintain tool in accordance with manufacturer's instructions Board to minimize dust emissions. Dust collector must provide the (with blade air flow recommended by the tool manufacturer, or greater, diameter of 8 and have a filter with 99% or greater efficiency.

DUST COLLECTION inches or less) Handheld Use grinder equipped with commercially available shroud Grinders for and dust collection system. Operate and maintain tool in Mortar Removal accordance with manufacturer's instructions to minimize (i.e., tuckpointing) dust emissions. Dust collector must provide 25 cubic feet per APF 10 APF 25 minute (cfm) or greater of airflow per inch of wheel diameter and have a filter with 99% or greater efficiency and a cyclonic pre-separator or filter-cleaning mechanism. Handheld Use grinder equipped with commercially available shroud Grinders for and dust collection system. Operate and maintain tool in Uses Other than accordance with manufacturer's instructions to minimize Mortar Removal dust emissions. Dust collector must provide 25 cubic feet per minute (cfm) or greater of airflow per inch of wheel diameter and have a filter with 99% or greater efficiency and a cyclonic pre-separator or filter-cleaning mechanism. − When used outdoors. None None − When used indoors or in an enclosed area. None APF 10

▶ See page 23 for Bosch to Fastenal® SKU conversion list

22 BOSCHTOOLS.COM REFERENCE GUIDE: DUST SOLUTIONS FOR CONCRETE 877-BOSCH-99 DRILLING DEMOLITION, GRINDING AND CUTTING BOSCH TO FASTENAL® SKU CONVERSION LIST

Bosch # Fastenal # Description Bosch # Fastenal # Description 11250VSRD 0223144 3/4" SDS-plus® Rotary Hammer, Pistol Grip w/ Dust Collection GWS9-45 2125578 4-1/2” Angle Grinder - 8.5 Amp w/ Lock-on Slide Switch 1" SDS-plus® Rotary Hammer, "D" Handle "Bulldog Xtreme™" + 4-1/2" 11255VSR 0212000 HCD2074 2160177 Speed Clean Dust Extraction Bit SDS+ 7/16x7-1/2x13 Angle Grinder HCD2084 2160178 Speed Clean Dust Extraction Bit SDS+ 1/2x7-1/2x13 11255VSR- 2126877 1" SDS-plus® Rotary Hammer, "D" Handle "Bulldog Xtreme™" GWS8 HCD2094 2160179 Speed Clean Dust Extraction Bit SDS+ 9/16x10x15 11264EVS 0223140 1-5/8" SDS-max® Combination Hammer HDC100 2121928 SDS-plus® Dust Collection Attachment (Drilling & Chipping) 11265EVS 0253640 1-5/8" Spline Combination Hammer HDC200 2121927 SDS-max® Drilling Dust Collection Attachment 11316EVS 0236396 SDS-max® Demolition Hammer HDC250 2121929 SDS-max® Core Bit Dust Collection Attachment 11321EVS 0253641 SDS-max® Demolition Hammer w/ Vibration Control HDC300 2121933 SDS-max® Chiseling Dust Collection Attachment 11335K 0212013 1-1/8" Breaker Hammer w/ Vibration Control HDC400 2121934 1-1/8" Hex Dust Collection Attachment 1375A 0201018 4-1/2” Angle Grinder - 6 Amp w/ Lock-on Slide Switch RH1255VC 2121924 2" SDS-max® Rotary Hammer w/ Vibration Control DF18V-16 TBD GDE18V-16 HEPA Replacement Filter RH228VC 0258717 1-1/8" SDS-plus® Rotary Hammer w/ Vibration Control "Bulldog Xtreme Max™" 1821D 0212041 5” Angle Grinder - 9.5 Amp w/ No Lock-On Trigger Switch RH328VC 0247995 1-1/8" SDS-plus® Rotary Hammer w/ Vibration Control 1893-6 0212085 9” Large Angle Grinder - 15 Amp w/ Lock-on Trigger Switch RH328VC-36K 2125567 36V 1" SDS-plus® Rotary Hammer w/ (2) FatPack (4.0Ah) Batteries 18DC-5E 0253651 4-1/2" - 5" Dust Collect Cut Off Guard RH328VCQ 0247996 1-1/8" SDS-plus® Rotary Hammer w/ Vibration Control & QCC 18DC-6E 0253652 6" Dust Collect Cut Off Guard RH432VCQ 0247997 1-1/4" SDS-plus® Rotary Hammer w/ Vibration Control 18SG-5E 0253653 5" Surface Grinding Guard RH540M 2125561 1-9/16" SDS-max® Rotary Hammer 18SG-7 0253654 7" Surface Grinding Guard RH540S TBD 1-9/16" SDS-max® Rotary Hammer Spline 1974-8 0253644 7” Large Angle Grinder - 15 Amp w/ Lock-on Trigger Switch RH745 2160165 1-3/4" SDS-max® Combination Hammer 1974-8D 0253643 7” Large Angle Grinder - 15 Amp w/ No Lock-on Trigger Switch RH850VC 2160166 1-7/8" SDS-max® Rotary Hammer w/ Vibration Control 1994-6 0253646 9” Large Angle Grinder - 15 Amp w/ Lock-on Trigger Switch TG502 2160169 5" Tuckpointer Dust Guard 1994-6D 0221979 9” Large Angle Grinder - 15 Amp w/ No Lock-on Trigger Switch VAC002 2251955 1-1/4" or 1-1/2" Hose-to-35mm Port Adapter 19DC-7 2121936 7" Large Angle Grinder Dust Guard VAC003 99412320 35mm hose-to-1-1/4" port Adapter 19DC-9 2121937 9" Large Angle Grinder Dust Guard VAC004 99412321 35mm hose to-2-1/4" port Adapter AG50-10TG 2161674 5” Tuckpointer Kit w/ AG50 Grinder and Tuckpointing Guard VAC005 99412322 35mm 16.4 ft. Standard (Friction-Fit) Vacuum Hose BH2760VC 0223889 Brute™ Breaker Hammer Bare Tool VAC020 99412335 2-1/2" Hose-to-35mm Port Adapter

BH2760VCB 0259040 Brute™ Breaker Hammer Basic Kit (w/ Basic Cart, Flat Chisel & Moil Point) VAC024 2121956 Vacuum Hose Adaptor (Connects 1-1/4 - 1-1/2" Hose to 35MM Dust Ports) CONCRETE BH2770VCD 2125562 Brute™ Turbo Breaker Hammer (w/Deluxe Cart, 2 Star Point & 2 Flat Chisels) VAC090A 2161628 9-Gallon Dust Extractor w/ Auto Filter Clean CSG15 2161675 5” Concrete Surfacing Grinder - 12.5 Amp w/ Dust Collection Shroud VAC090AH 91162697 9-Gallon Dust Extractor w/ Auto Filter Clean/HEPA Filter/Fleece Bag DH1020VC 2125563 SDS-max® Inline Demolition Hammer w/ Vibration Control VAC090S 2161629 9-Gallon Dust Extractor w/ Semi-Auto Filter Clean DH507 2160167 SDS-max® Demolition Hammer VAC140A 2161630 14-Gallon Dust Extractor w/ Auto Filter Clean DH712VC 2160168 SDS-max® Demolition Hammer w/ Vibration Control VAC140AH 91162698 14-Gallon Dust Extractor w/ Auto Filter Clean/HEPA Filter/Fleece Bag DXS2104 2160180 Speed Clean Dust Extraction Bit SDS+ 5/8x10x15 VAC140S 2161631 14-Gallon Dust Extractor w/ Semi-Auto Filter Clean DXS2114 2160181 Speed Clean Dust Extraction Bit SDS+ 11/16x12-1/2x18 VB000P 2121938 Disposable Plastic Bags - 9/14 Gallon (10 bags per package) DXS2124 2160182 Speed Clean Dust Extraction Bit SDS+ 3/4x12-1/2x18 VB090 2121950 Paper Filter Bags - 9 Gallon (5 bags per package) DXS5034 2160184 Speed Clean Dust Extraction Bit SDS Max 3/4x12-1/2x21 VB090F 2165341 Fleece Filter Bag-9 Gal (5 bags per package) DXS5044 2160186 Speed Clean Dust Extraction Bit SDS Max 7/8x15x25 VB090F-30 2183294 Fleece Filter Bag-9 Gal (30 bags per package) DXS5048 2160185 Speed Clean Dust Extraction Bit SDS Max 13/16x15x25 VB090R 2121955 Reusable Fleece Filter Bag - 9 Gallon (1 bag per package) DXS5054 2160187 Speed Clean Dust Extraction Bit SDS Max 1x17-1/2x27 VB090S 2121953 Wet Filter Bags - 9 Gallon (5 bags per package) DXS5062 2160188 Speed Clean Dust Extraction Bit SDS Max 1-1/8x20x29 VB140 2121951 Paper Filter Bags - 14 Gallon (5 bags per package) DXS5082 2160189 Speed Clean Dust Extraction Bit SDS Max 1-3/8x25x34 VB140F 2121952 Fleece Filter Bags - 14 Gallon (5 bags per package) DXSMAX 2160190 Speed Clean Dust Extraction Bit SDS Max Adapter VB140F-30 2183295 Fleece Filter Bags - 14 Gallon (30 bags per package) DXSPLUS 2160183 Speed Clean Dust Extraction Bit SDS+ Adapter VF100 2121942 Flat Paper (cellulose) Filter GA50DC 2121935 5” Concrete Cutting Dust Collection Guard VF110 91162700 Flat Polyester Filter GBH18V-26K 2121932 18V 1" SDS-plus® Rotary Hammer w/ (2) FatPack (6.0Ah) Batteries VF120H 2121930 Flat HEPA Filter GBH2-28L 2127961 1-1/8" SDS-plus® Rotary Hammer w/ Vibration Control & Kick Back VF130H 91162701 Extended Life Flat HEPA Filter GDE18V-16 2183292 18V HEPA dust Collector Attachment VH1022 2121947 10ft, 22mm Hose GWS10-45 2125568 4-1/2” Angle Grinder - 10 Amp w/ Lock-on Slide Switch VH1035 2121940 10ft, 35mm Hose GWS10-45P 2125569 4-1/2” Angle Grinder - 10 Amp w/ Lock-on Paddle Switch VH1622A 2121945 Anti-Static 16ft, 22mm Hose GWS10-45PD 2125570 4-1/2” Angle Grinder - 10 Amp w/ No Lock-on Paddle Switch VH1635 2121943 16ft, 35mm Hose GWS13-50 2125571 5" Angle Grinder - 13 Amp w/ Lock-on Slide Switch VH1635A 2121944 Anti-Static 16ft, 35mm Hose GWS13-50P 2125572 5" Angle Grinder - 13 Amp w/ Lock-on Paddle Switch VX100 2121939 Bend, Anti-Static GWS13-50PD 2125573 5" Angle Grinder - 13 Amp w/ No Lock-on Paddle Switch VX110 2121948 3 Piece Chrome Extension Tube (3ft Total Length) GWS13-50VS 2125574 5" Variable Speed Angle Grinder - 13 Amp w/ Lock-on Slide Switch VX120 2121941 Powertool Adapter 22/35 mm GWS13-50VSP 2125575 5" Variable Speed Angle Grinder - 13 Amp w/ Paddle Switch VX130 2121949 Floor Nozzle Set GWS13-60 2125576 6" Angle Grinder - 13 Amp w/ Lock-on Slide Switch 1191VSRK 0212035 1/2" Hammer Drill w/ Case (7.0 Amp) GWS13-60PD 2125577 6" Angle Grinder - 13 Amp w/ No Lock-on Paddle Switch HD18-2 2125560 1/2" 2-Speed Hammer Drill (8.5 Amp) GWS8-45 2126881 4-1/2” Angle Grinder - 7.5 Amp w/ Lock-on Slide Switch HD21-2 0247986 1/2" 2-Speed Hammer Drill Kit (9.2 Amp)

23 BOSCHTOOLS.COM/PROGUARD AVAILABLE ANYTIME, ANYWHERE ON ANY DEVICE ▶ The latest, up-to-date product information and specifications ▶ OSHA regulation overview and silica insights ▶ Connect with Customer Service via text, email or phone ▶ Access where-to-buy information easily

MAKE DUST HISTORY MOVE TOWARD OSHA COMPLIANCE WITH PRO+GUARD™ DUST SOLUTIONS

TOOL FINDER Find the right tool and accessory for your job LATEST NEWS ▶ Trade specific ▶ Best practices ▶ Application specific ▶ Events ▶ Promotions News and promotions ▶ Press Releases

CONNECT WITH US

Robert Bosch Tool Corporation | 1800 W. Central Rd. | Mount Prospect, IL 60056 Telephone 1-877-BOSCH99 | Fax 224-232-3169 | www.boschtools.com 2017-789