DOCSLIB.ORG

Screen Hardware Custom Made Window Screens

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Screen Hardware Custom Made Window Screens Screen Hardware Custom Made Window Screens Account#_________________ Page# ____ of ____ Sold To:___________________________________________ Ship To: ___________________________________________________ __________________________________________________ ___________________________________________________________ __________________________________________________ ___________________________________________________________ __________________________________________________ ___________________________________________________________ Salesman__________________________ Supervisor__________________________ Purchase Order#_____________________________ Date______________________________ Quoted By___________________________ Customer #__________________________________ STEP 1 Measurement STEP 5 Crossbrace location __________" Width x _________" Height Required_____ Not Required______ Note: On all screen frames with flange include flange in measurement. Horizontal:______inches up from the bottom Vertical:______inches from the right rail STEP 2 Identify Frame part #____________ STEP 6 Type of Corner Keys STEP 3 Select frame finish. Mill_____ White_____ Brown_____ Plastic External Square Cut (Standard) _____ Other __________________________ Plastic Internal Mitered _____ Plastic External Mitered (Andersen Style) _____ STEP 4 Select wire. Note: Unless otherwise specified, all custom made window screens are manu- factured with external plastic corner keys. Charcoal Fiberglass (Standard) _____ Gray Fiberglass_____ Bright Aluminum _____ STEP 7 Hardware: Required _____ Not Required ____ Charcoal Aluminum ______ Other _________________ STEP 8 Measure location of hardware and specify on drawing. Always determine hardware location from the end of corner to either center or pivot point depending on type of hardware. Fill out the positioning of the hardware below. If no hardware is requested check here ❑ Location Number Quantity Position - Number of inches from end (tip or corner) Installed on HEAD RAIL Installed on SILL RAIL Installed on LEFT RAIL Installed on RIGHT RAIL Part# Quantity Size Price Each Amount 990-999 ____________" width x ____________" height 890-999-1 Window Screen Packaging Charge Note: On all screen frames with flange include flange in measurement. FREIGHT TOTAL STEP 9 All Custom made window screen orders will not be processed without customer's signature verifying acceptance of our terms and conditions of order. I understand that this material is not regular stock, but custom made to specifications as stated above. I understand and accept the condition that this material is NON RETURNABLE and NON-CANCELABLE. A packaging charge per screen will be assessed for quantities less than 10 of a size. Freight prepaid on orders of 300 or more assorted screens. IT IS THE RESPONSIBILITY OF THE CUSTOMER TO INSPECT FOR DAMAGE, AND MAKE THE CLAIM WITH THE CARRIER, AS WE ARE NOT RESPONSIBLE FOR DAMAGE. Please Note: For all truck deliveries there is a minimum floor charge. There is an additional charge for residential deliveries. Signature of Authorized Buyer___________________________________________ Buyer Phone______-___________ Title ____________________________________________________________________________________________ 216 Screen Hardware Custom Made Window Screens ROLLED FORMED ALUMINUM FRAME SIZES See Following Pages for Components 90M-250 90M-220 90M-196 90M-256 90M-314 90M-280 90-504M Aluminum Frame Accessories .019 GAUGE 5/32" PLUNGER ASSEMBLIES FIXED PIN HAIR PIN CLIP Part # Color Part # Cap Color Part # Cap Color 90M-250 Mill 90-635FT White 90-635 White 90M-251 White 90-635BFT Black 900-21792 90-127 Brown 90-635B Black 90M-252 Flip Type 5/32"x1-1/8" LOOP LATCH PULL TABS Part # Color Part # Description Part # Color 900-12883 Clear 90-633 Black vinyl flexible 90-118 Mill 90-103X 900-12883B Black 90-634 Black vinyl rigid 90-118WH White Spline Type Nylon - Lays Flat 90-634G Gray vinyl rigid Aluminum .019 GAUGE 5/32" PLUNGER ASSEMBLIES 7/32" PLUNGER ASSEMBLIES Part # Color Part # Cap Color Part # Cap Color Part # Cap Color Part # Cap Color 90M-220 Mill 90-635 White 90-635FT White 900-9850 White 900-9850FT White 90M-221 White 90-635B Black 90-635BFT Black 900-9850B Black 900-9850BFT Black 90M-222 Brown Flip Type Flip Type FIXED PIN BUTTERFLY LATCH LOOP LATCH HAIR PIN CLIP SWIVEL CLIP Part # Description Part # Color 900-21792 5/32"x1-1/8" 90-506 90-103X 90-127 90-691 Black 900-21747 7/32"x1-1/8" Spline Type 90-691W White 217 Screen Hardware Custom Made Window Screens CORNER SPRING TENSION SPRING PULL TABS Part # Color Part # Description Part # Color 90-118 Mill 90-633 Black vinyl flexible 900-12883 Clear 90-498 90-97 90-118WH White 90-634 Black vinyl rigid 900-12883B Black Aluminum 90-634G Gray vinyl rigid Nylon - Lays Flat 5/32" PLUNGER ASSEMBLIES 7/32" PLUNGER ASSEMBLIES .019 GAUGE Part # Color Part # Cap Color Part # Cap Color Part # Cap Color Part # Cap Color 90M-196 Mill 90-635 White 90-635FT White 900-9850 White 900-9850FT White 90M-197 White 90-635B Black 90-635BFT Black 900-9850B Black 900-9850BFT Black 90M-198 Brown Flip Type Flip Type FIXED PIN BUTTERFLY LATCH LOOP LATCH HAIR PIN CLIP CORNER SPRING Part # Description 900-21792 5/32"x1-1/8" 90-506 90-103X 90-127 90-498 900-21747 7/32"x1-1/8" Spline Type TENSION SPRING PULL TABS Part # Color Part # Description Part # Color Part # Color 90-118 Mill 90-633 Black vinyl flexible 90-376 Black Clear 90-97 900-12883 90-118WH White 90-634 Black vinyl rigid 90-376GY (1831A) Gray 900-12883B Black 90-118BZ Bronze 90-634G Gray vinyl rigid Vinyl Nylon - Lays Flat Aluminum .019 GAUGE 5/32" PLUNGER ASSEMBLIES FIXED PIN HAIR PIN CLIP Part # Color 90M-256 Mill 90M-257 White Part # Cap Color Part # Cap Color 90M-258 Brown 90-635FT White 90-635 White 90-635BFT Black Can be used with frame 90-635B Black 900-21792 90-127 90M-196, 90M-197 & 90M-198 Flip Type 5/32"x1-1/8" 218 Screen Hardware Custom Made Window Screens LOOP LATCH POINTER LATCH CORNER SPRING TENSION SPRING Part # Color 90-103X 900-9823 Black Spline Type 900-9823W White 90-498 90-97 PULL TABS Part # Description Part # Color Part # Color 90-633 Black vinyl flexible 90-118 Mill 900-12883 Clear 90-634 Black vinyl rigid 90-118WH White 900-12883B Black 90-634G Gray vinyl rigid Aluminum Nylon - Lays Flat 5/32" PLUNGER ASSEMBLIES .019 GAUGE Part # Color 90M-314 White 90M-313A Almond 90M-315 Bronze Part # Cap Color Part # Cap Color 90-532 A Good Substitute For Bayform 90-635 White 90-635FT White Series B38LI Frame 90-635B Black 90-635BFT Black Flip Type 5/32" PLUNGER ASSEMBLIES 7/32" PLUNGER ASSEMBLIES .019 GAUGE .024 GAUGE Part # Color Part # Color Part # Cap Color Part # Cap Color Part # Cap Color 90M-280 Mill 90M-286 Mill 90-635FT White 90-635 White 900-9850 White 90M-281 White 90M-287 White 90-635BFT Black Brown Brown 90-635B Black 900-9850B Black 90M-282 90M-288 Flip Type 7/32" PLUNGER ASSEMBLIES HAIR PIN CLIP JIFFY HANGER FIXED PIN Part # Cap Color Part # Description 900-9850FT White 900-21792 5/32"x1-1/8" 900-9850BFT Black 90-127 90-696 900-21747 7/32"x1-1/8" Flip Type Mill 219 Screen Hardware Custom Made Window Screens SWIVEL CLIP LOOP LATCH BUTTERFLY LATCH CORNER SPRING Part # Color 90-691 Black 900-9851 90-103X 90-506 90-498 90-691W White Slip-on Type Spline Type TENSION SPRING PULL TABS Part # Color Part # Description Part # Color 90-118 Mill 90-633 Black vinyl flexible 900-12883 Clear 90-118WH White 90-634 Black vinyl rigid 90-97 900-12883B Black 90-118BZ Bronze 90-634G Gray vinyl rigid Nylon - Lays Flat Aluminum .024 GAUGE 5/32" PLUNGER ASSEMBLIES FIXED PIN Part # Color 90-504M Mill 90-504W White 90-504S Stone Bronze 90-504BZ Part # Color White A Good Substitute to Fit Andersen Windows. When substituting for 90-503W Part # Cap Color 90-698 5/32"x1-1/4" an Andersen screen, specify the external plastic corner keys. 90-503BZ Dk Bronze 90-513 White 90-503S Stone 90-513B Black LOOP LATCH SWIVEL CLIP BUTTERFLY LATCH JIFFY HANGER Part # Color 900-9851 90-103X 90-691 Black 90-515 90-696 Slip-on Type Spline Type Mill 90-691W White CORNER SPRING TENSION SPRING PULL TABS Part # Color Part # Description Part # Color 90-498 90-390 (2816P) Aluminum 90-97 90-633 Black vinyl flexible 900-12883 Clear 90-390BZ Bronze 90-634 Black vinyl rigid 900-12883B Black 90-634G Gray vinyl rigid Nylon - Lays Flat 220 Screen Hardware Screen Frames Freight pre-paid on 10 or more full cartons of frame. Only applies to 12' 6" length cartons. No freight allowance on 8' length cartons. .019 Gauge Part # Length Carton Qty Wt Color 90M-352 90M-250 12' 6" 184 lgths 135 lbs. Mill Inside Corner Key Plastic 90M-250AD 12' 6" 184 lgths 135 lbs. Almond 90M-251 12' 6" 184 lgths 135 lbs. White 90M-252 12' 6" 184 lgths 135 lbs. Bronze Part # Color 90-451 Mill 90M-253 8' 20 lgths 12 lbs. Mill 90-451AD Almond 90M-254 8' 20 lgths 12 lbs. White 90-452 White 90M-255 8' 20 lgths 12 lbs. Bronze 90-453 Dark Bronze Screen frame uses .140-9/64" Spline. Outside Corner Key Plastic .019 Gauge 90M-125 Part # Length Carton Qty Wt Color Inside Corner Key 90M-256 12' 6" 105 lgths 95 lbs. Mill Plastic 90M-256AD 12' 6" 105 lgths 95 lbs. Almond 90M-257 12' 6" 105 lgths 95 lbs. White Part # Color 90M-258 12' 6" 105 lgths 95 lbs. Bronze 90M-633 Mill 8' 20 lgths 12 lbs. Mill 90M-259 90M-633AD Almond 90M-260 8' 20 lgths 12 lbs. White 90M-634 White 90M-261 8' 20 lgths 12 lbs. Bronze 90M-635 Bronze Screen frame uses .140-9/64" spline. Outside Corner Key Plastic .019 Gauge 90M-125 Part # Length Carton Qty Wt Color Inside Corner Key 90M-196 12' 6" 128 lgths 90 lbs.
Load more

Recommended publications
  • PAL User Manual Installation and Operation HTC PAL PAL HTC-Xt
    HTC PAL / PAL HTC-xt User Manual Installation and Operation PAL User Manual Installation and Operation HTC PAL PAL HTC-xt Printing History Edition 1 January 1999 Software Version 2.0 Edition 2 April 2003 Software Version 2.0 Edition 3 November 2009 Software Version 2.5 to 4.1.X Edition 4 March 2010 Software Version 2.5 to 4.1.X Edition 5 June 2010 Software Version 2.5 to 4.1.X Edition 6 March 2013 Software Version 2.6 to 4.3.X Original Instructions CTC Analytics AG reserves the right to make improvements and/or changes to the product(s) described in this document at any time without prior notice. CTC Analytics AG makes no warranty of any kind pertaining to this product, including but not limited to implied warranties of merchantability and suitability for a particular purpose. Under no circumstances shall CTC Analytics AG be held liable for any coincidental damage or damages arising as a consequence of or from the use of this document. © 1999 – 2013 CTC Analytics AG. All rights reserved. Neither this publication nor any part hereof may be copied, photocopied, reproduced, translated, distributed or reduced to electronic medium or machine readable form without the prior written permission from CTC Analytics AG, except as permitted under copyright laws. CTC Analytics AG acknowledges all trade names and trademarks used as the property of their respective owners. 1• HTC PAL / PAL HTC-xt User Manual Installation and Operation A. Safety Information Safety Information and Warnings for Users of the PAL System General Considerations The PAL System User Manual and related documents must be consulted by the user under all circumstances before a unit is put to use.
    [Show full text]
  • Power Steering Gear, Sheppard M100 46.05 Automatic Relief Plunger Repair Procedure
    Power Steering Gear, Sheppard M100 46.05 Automatic Relief Plunger Repair Procedure There is a relief plunger in the cylinder head and one The spring pin, flange, and plunger body should in the bearing cap. Follow the appropriate set of pro- be accessible for repair at this point. cedures for the relief plunger you are repairing. CAUTION Repair Procedure for the Do not allow the screwdriver bit to slip off the Cylinder Head Automatic plunger body. Damage to the bore could result. Relief Plunger NOTE: The relief plunger flange is held in place with patch lock and the threads are staked at 1. Turn off the engine, apply the parking brakes, the factory. It will require approximately 15 to 20 and chock the tires. lbf·in (150 to 205 N·cm) to remove the flange. 2. Open the hood or tilt the cab. For cab tilt instruc- 9. Carefully insert a screwdriver bit into the plunger tions, see Group 60 in this manual. bore to hold the slotted head of the relief plunger 3. Remove the steering driveline. For instructions, body in place. Using an open-end wrench to hold see Section 46.04, Subject 100. the flange in place, carefully turn the flange to remove the flange from the plunger body. See 4. Verify that the steering gear has automatic relief Fig. 2. Discard the flange. plungers. Steering gears with automatic relief plungers will have the word AUTO cast into the housing. See Fig. 1. Steering gears with auto- matic relief plungers also have plastic caps on the plunger bosses.
    [Show full text]
  • Builders Tools & Accessories
    BUILDERS TOOLS & ACCESSORIES CONSTRUCTEURS OUTILS ET ACCESSOIRES Great Deals On Building supplies SHOP NOW & SAVE CONTENT Pages Tile Cutter & Accessories 286 Laminate Cutter & Accessories 290 Floor Roller Tools 294 Floor Scraper & Accessories 296 Glass & Tile Nipper 298 Glass Cutter Tool & Accessories 300 Tile Spacers & Tile Installation Tools 301 Tile Grout Removal Tools & Accessories 306 Grout Bag & Clean Up Accessories 307 Tile Grouting Sponge 308 Sawhorse & Brackets 310 Drywall Lifting Tools & Accessories 312 Drywall Sanding & Abrasive Accessories 315 Drywall Taping & Installation Accessories 318 Magnesium Bull Float & Accessories 320 Caulking Guns & Accessories 322 Pointed & Brick Trowels 326 Margin Trowels 328 Tuck Pointer Trowels 330 Concrete Groover 331 Drywall Trowel 332 Pool Trowels 333 Notched Trowels 336 Masonry Tools & Accessories 342 Grout & Cement Floats 344 Plastering Hawks & Taping Knives 348 Putty Knives - Flexible Blades 350 Mixing Paddles & Mud Pans 352 Tool Boxes and Storage 355 Bags, Pouches & Belts 358 Tarpaulins 365 Fencing & Barriers 370 Glass & Tile Nippers 372 Drywall Tools & Accessories 373 Plaster & Finishing Trowels 374 Tuck Pointer & Concrete Edgers 375 Floats & Plastering Hawk Accessories 380 Drywall Tools & Accessories 384 Grouting Tools & Mixing Paddles 385 Tile Cutter & Accessories Professional Tile Cutter 4-Ball Bearing Revolutionary Sliding High Mechanism Leverage Handle Tungsten-Alloy Japanese Cutting Wheel Over 10,000 linear feet of cut with a single wheel! Rubber Padded Bed Reinforced Heavy Duty
    [Show full text]
  • BOLTING TOOLS Enerpac Bolting Tools
    E414e GB BOLTING TOOLS Enerpac Bolting Tools Enerpac's Bolting Solutions caters to the complete bolting work-flow, ensuring joint integrity in a Bolting Integrity Software variety of applications throughout industry: Visit www.enerpac.com to access our free on-line bolting software application Joint Assembly and obtain information on tool selection, bolt load From simple pipe alignment to complex joint positioning of large calculations and tool pressure settings. A combined application data sheet and joint completion report is structural assemblies, our comprehensive line of joint assembly also available. products range from hydraulic and mechanical alignment tools to PLC-controlled multi-point synchronous positioning systems. Controlled Tightening Enerpac offers a variety of controlled tightening options to best meet the requirements of your application. From mechanical torque multipliers to hydraulic, pneumatic and electric driven square drive wrenches, and from low profile hexagon torque wrenches to inter- connectable bolt tensioning tools; we offer the products you need for accurate and simultaneous tightening of multiple bolts. Joint Separation Enerpac also provides hydraulic nut splitters and a variety of mechanical and hydraulic spreading tools for joint separation during inspection, maintenance and decommissioning operations. High quality bolting solutions from the brand you can trust. See how Enerpac can make your bolting work-flow more accurate, safer and efficient. www.enerpac.com Bolting Tools Overview Tool Type and Functions
    [Show full text]
  • SCREEN HARDWARE Windowanddoorparts.US Need
    WindowAndDoorParts.US SCREEN HARDWARE CUSTOM MADE STANDARD ROLL FORM ALUMINUM WINDOW SCREEN ORDER FORM Account#_________________ Page# ____ of ____ Sold To:___________________________________________ Ship To: ___________________________________________________ __________________________________________________ ___________________________________________________________ __________________________________________________ ___________________________________________________________ __________________________________________________ ___________________________________________________________ Salesman__________________________ Supervisor__________________________ Purchase Order#_____________________________ Date______________________________ Quoted By___________________________ Customer #__________________________________ STEP 1 Measurement STEP 5 Crossbrace location Required_____ Not Required______ _____________" Width x _____________" Height Horizontal:______inches up from the bottom Note: On all screen frames screen measurements must be box to box. Vertical:______inches from the right rail Note: Maximum screen size is 45" x 80". Can not process orders for any screens larger than 45" x 80". STEP 6 Type of Corner Keys Plastic External Square Cut (Standard) _____ STEP 2 Identify Frame part #____________ Plastic Internal Mitered _____ Plastic External Mitered (Andersen Style) _____ Select frame finish. STEP 3 Note: Unless otherwise specified, all custom made window Mill_____ White_____ Almond_____ Beige_____ screens are manufactured with external
    [Show full text]
  • Download Putnam's Word Book
    Putnam's Word Book by Louis A. Flemming Putnam's Word Book by Louis A. Flemming Produced by the Distributed Proofreaders. Putnam's Word Book A Practical Aid in Expressing Ideas through the Use of an Exact and Varied Vocabulary By Louis A. Flemming Copyright, 1913 by G. P. Putnam's Sons (Under the title _Synonyms, Antonyms, and Associated Words_) Preface page 1 / 1.424 The purpose of this book, as conceived by the author, is not to attempt to create or to influence usage by pointing out which words should or should not be used, nor to explain the meaning of terms, but simply to provide in a form convenient for reference and study the words that can be used, leaving it to those who consult its pages to determine for themselves, with the aid of a dictionary if necessary, which words supply the information they are looking for or express most accurately the thoughts in their minds. The questions, therefore, that were constantly in the author's mind while he was preparing the manuscript were not, _is_ this word used? nor _should_ it be used? but is it a word that some one may want to know as a matter of information or to use in giving expression to some thought? When the word in question seemed to be one that would be of service it was given a place in the collection to which it belongs. Believing the book would be consulted by students and workers in special fields, the author incorporated into it many words, including some technical terms, that might, in the case of a work of more restricted usefulness, have been omitted.
    [Show full text]
  • 80T3-Multiplex-Plunger-Pumps-Installation-Care-And-Operation-Manual.Pdf
    Multiplex Plunger Pumps Installation, Care and Operation Manual 30T-2 165T-5 Covering the following pumps: 300Q-5 30T-2 60T-3 80T-3 100T-4 250T-5 200T-5 130T-4 165T-5 200T-5 250T-5 300Q-5 60T-3 130T-4 Sales / Technical Information USA Tollfree: 1-800-324-4706 Phone: 1 (918) 447-4600 Fax: 1 (918) 447-4677 Internet: http://www.nov.com 80T-3 100T-4 REVISED: August 19, 2005 P.O. Box 4638 Houston, Texas 77210-4638 ISSUE: September 15, 2003 SUPPLEMENT FOR ALL PUMP MANUALS ! WARNING ! PRESSURE RELIEF VALVES ! NOTICE ! Our technical publications relative to reciprocating pumps state that pressure relief valves must be installed in the discharge systems from these units. This supplement is issued to emphasize the importance of relieving the discharge system of all pressure which exceeds the rated working pressure applied by the manufacturer to the specific pistons and liners (or plungers and packing) in any particular unit. ! WARNING ! For the protection of persons and property the discharge system from each Reciprocating Pump must be equipped with a device which relieves the system of all pressures which exceed the pressure rating applied by the manufacturer to each particular piston or plunger diameter. Allowances will be made for pressure surges which are inherent with the reciprocating action of piston and plunger pumps. The percentage of pressure allowance appears later in this publication and in the “Standards of the Hydraulic Institute” (13th edition). The relieving device must provide for instantaneous pressure relief, it may be a valve designed for automatic or manual resetting; however, if preferred, rupture discs or burst discs may be installed.
    [Show full text]
  • Specialty Tool Instructions
    Specialty Tool Instructions • Numbers in parenthesis ( ) refer to tools shown on back page • Refer to individual pump installation manual for complete service instructions Seal Protector (5) Valve Plunger Holder (6) When installing new shaft seals, the Use Plunger Holder to firmly hold valve Seal Protector protects the inside of plunger stem while changing diaphragms the seals from nicks and cuts. (Figure 7). 1. Place shaft seals onto the tapered 1. Rotate pump shaft to maximum forward end of the seal protector with a stroke of selected diaphragm. liberal amount of grease in between W0284 2 Pull up on diaphragm to expose seals (Figure 1). crosswise holes in valve plunger 2. Place Seal Protector completely stem. W0285 onto pump shaft. Figure 1 3. Insert center tine of Plunger Holder Figure 7 tool completely. Seal Inserter (2) 4. Release diaphragm while continuing to hold plunger Used to seat seals on D/G-10 and holder. larger size pumps. 5. Remove old diaphragm and install new diaphragm with 1. Use tapered end of Seal Inserter to an appropriate screwdriver and according to Installation push seals off of Seal Protector and manual. 6. Lift up on new diaphragm to remove Plunger Holder tool. into pump housing (Figure 2). W0279 2. Tapping with a rubber mallet may be 7. Rotate pump shaft for the next diaphragm and repeat. necessary to fully seat seals flush Figure 2 with pump housing. Plunger Guide Lifter (8 or 9) For pumps without plungers (all F/G-20 D/G-03 and D/G-04 Shaft Rotator (2 or 7) Series pumps), use the Plunger Guide Lifter (8) to retrieve valve plunger from inside piston.
    [Show full text]
  • Hans Brunner Tool Auctions June 22, 2012
    Hans Brunner Tool Auctions June 22, 2012 PO Box 5238, Brassall Qld 4305 www.hansbrunnertools.gil.com.au 07 3294 8253 Vol 21 Antique Tools & Parts Sales in March, June, Sept & Dec - to subscribe to free catalogues please write or email. The low estimate is the reserve – I accept any amount on or over the reserve. Send in your bids anytime. Deadline is 12.00 noon on auction day. The highest offer wins. If identical bids are received on a lot the first one in is the winner. I’ll invoice you the day after the sale. Postage is extra I rate the condition of the lots from P (poor) Fr (fair) G (good) G+ (very good) to F (fine) 2 1 Double-sided shifting spanner by Crescent. Very minor 2 Butcher’s steel marked Nichols Bros. Steel is rust, no pitting. 8” 14” long, overall with handle 19.5” G $ 15-30 1 long. G+ $ 30-60 3 4 Super clean Greenlee 8” drawknife in the 4 English style with a 3 Stanley 36 ½ L one foot box- wood rule straight back. Minor chip with calliper. Minor nick above the 1 inch on one handle. G+ 30-60 mark. G $ 15-30 5 Very collectable Junior Shell tin for 6 cleaning/lighter fluid. Very good graphics on all sides. This model 6 Brass powder flask made in Italy. 9 never had a handle. ½” long. No attempt was made to 7 5 3” x 1 ¾” x 3 ¾”. G+ artificially age this flask – even though 30-70 it’s not new.
    [Show full text]
  • 155-MM HOWITZER MATERIEL MODEL of 1918 (Schneider)
    No. 2017 HANDBOOK OF THE 155-MM HOWITZER MATERIEL MODEL OF 1918 (Schneider) MOTORIZED WITH INSTRUCTIONS FOR ITS CARE (FIFTY-FIVE ILLUSTRATIONS) ...•••••••••...••••• DECEMBER 14, 1918 WASHINGTON GOVERNMENT PRINTING OFFICE 1919 ( No. 2017 HANDBOOK OF THE 155-MM HOWITZER MATERIEL MODEL OF 1918 (Schneider) MOTORIZED WITH INSTRUCTIONS FOR ITS CARE (FIFTY-FIVE ILLUSTRATIONS) DECEMBER 14, 1918 WASHINGTON GOVERNMENT PRINTING OFFICE 1919 (Form No., 2017.) The Commanding Officer or the Post or Coast Defense Ordnance Officer to whom this copy is issued will be held personally responsible for its safe-keeping. When another officer relieves him a' receipt for it will be taken, which should be mailed to the CHIEF OF ORDNANCE, U. S. Army, Wash- ington, D. C. NOTE.—This pamphlet should be destroyed when superseded by one of later date. (2) WAR DEPARTMENT, OFFICE OF THE CHIEF OF ORDNANCE, Washington, December 14, 1918. This manual is published for the information and government of the Army of the 'United States. By order of the Secretary of War: C. C. WILLIAMS,. Major General,.Major Chief of Ordnance. (3) PLATE I B 155-mm. Howitzer Carriage, Model of 1918 (Schneider). Traveling Position. CONTENTS. Page. List of plates 10 Table of equivalents 12 PART I.-DESCRIPTION OF MATERIEL. General description of the 155-mm. howitzer materiel 13 155-mm. howitzer 14-20 Table of weights, principal dimensions, etc. Nomenclature of the howitzer. Description of the howitzer. The howitzer. .--,5he breech mechanism. The firing mechanism. The percussion mechanism. Operation of the breech mechanism. To open the breech. To close the breech. Misfirings. Missing of the primer.
    [Show full text]
  • Crest/Good Manufacturing Company
    CREST/GOOD MANUFACTURING COMPANY, INC Since 1896 America’s Number One Source For Quality Plumbing Parts, Fixtures, Specialty Items and Tools For Now and The Next 100 Years. 2015 BACK TO SCHOOL SPECIALS AQUA-FIT SENSOR FAUCET SYSTEM ZURN’s new electronic faucet series have battery, hardwire, and plug in power options and are constructed of solid chrome plated low lead cast brass. • Flexible Installation Technology. • Infrared sensor occupant detection. • Field adjustable time-outs, sensor range, and line purge. • Energy saving electronics and sensors . • 10-year lithium ion battery. • Concealed sensor lens and aerator reduces vandalism . • LEED fl ow rates of 1.5 – .35 gpm fl ow rates. • All cast brass design and mounting for durability. • In-line fi lter assembly. • 4 “AA” alkaline batteries (standard). 9ZR6955 9ZR6950 9ZR6951 Zurn understands the importance of planning for the future when it comes 9ZR6955-E (3 hole, 4” version).............................$429.99 to restroom maintenance. The all new Aqua-FIT Faucet System features “Flexible Installation Technology” (“FIT”). This new design makes retrofit- 9ZR6950-E (Single hole).....................................$429.99 ting easy. With just an allen wrench, you can replace the faucet spout or change to a completely new design without having to work below the deck. 9ZR6951-E (Single hole, with temp. mixer).............$519.99 ORANGE PUMICE EXTENDABLE LIGHTED OUT-OF-SERVICE LOTION HAND CLEANER INSPECTION MIRROR COVERS • Super bright LED light. • 3 mil poly fi ts • Fresh-smelling natural citrus power deep cleans • Rear mounting magnet. all wall mount to remove stubborn grease and grime. • Includes 4 LR44 batteries. urinals. • Fortifi ed with aloe, lanolin, & glycerin.
    [Show full text]
  • Amarkgroup Professional Tilingprofessional Equipment
    Amark Group | Professional Tiling Equipment - Buyers Guide | Professional AmarkGroup Professional Tiling Equipment EDITION 13 AmarkGroup Professional Tiling Equipment AMARK GROUP ABN: 48 088 300 010 48 Skarratt Street, Silverwater NSW 2128 Australia t: 61 2 8748 8600 f: 61 2 8748 8611 e: [email protected] w: www.amark.net.au © Copyright reserved 05/2013 Amark Group AmarkGroup AmarkGroup TERMS & CONDITIONS Professional Tiling Equipment TERMS & CONDITIONS Professional Tiling Equipment The terms and conditions upon which AMARK GROUP (hereinafter called “the supplier”) is prepared to supply goods and services (hereinafter call “Goods”) to the customer Welcome to the 2013 edition of the Amark Group tiling tools and trims guide (hereinafter called “the customer”) are as follows: Included in this edition is our largest ever release of new and innovative products which are being constantly sourced 1. GENERAL from around the world. With such a diverse range of products suited to the construction industry it is now possible to The following are the Terms and Conditions of trading for Goods supplied from time to time unless different Terms and Conditions are agreed upon at the time of a particular sale, in which case other Terms and Conditions shall prevail to the extent of any inconsistency. purchase all your requirements from one supplier at a guaranteed competitive price. 2. PRICES Should you have any queries regarding a product featured in this publication please do not hesitate to give us a call we Prices are subject to variation without notice and Goods and services will be invoiced at prices current at the time of their provision unless otherwise agreed in writing.
    [Show full text]