DOCSLIB.ORG

Comprehensive Index Issues 1-222 A-Line-It Jig Band Saw Box

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Comprehensive Index Issues 1-222 A-Line-It Jig Band Saw Box ® Comprehensive Index Issues 1-222 A-Line-It Jig Band saw box A anchors, 100:29, 211:8 arched with raised panel secrets to square, 213:14 77:26 A-Line-It Jig, 172:14 angle clamps, 187:9 doors, 67:18 awls high-tension springs, abrasive pads angle gauges cherry, 102:6, 198:30 scratch, 121:4 176:12 about, 101:28 digital, 193:12 two-door, four-drawer, traditional tool, 206:11 link belt, 176:11 for buffing, 91:5 shop-made, 96:5 143:6 azebiki saws, 75:26, micro-adjuster, 176:13 vs. steel wool, 152:9 for steep miters, 160:6 using warped stock, 174:13 push blocks, 85:11, accelerators (glue), 188:9 Veritas Blade Gauge, 67:17 165:44 accent squares 220:63 ash (wood), 57:22 B resaw guide, 176:13, jig for, 116:22 Wixey, 168:15, 179:5, assembly blocks, 105:5, bachelor’s chest, 34:4 204:6 in laminated mirror rail, 193:12 208:29 back boards, floating, roller guide system, 116:18 angle jigs assembly jigs 178:49 176:12 Accu-Miter miter gauge, drill press, 174:4 arch, 213:32 back saws table extension, 194:6 157:15 miter saw, 172:45, 197:7 chaise lounge, 171:33 see also Japanese saws table pin, 217:7 Accuright Circle Cutting angles clamping, 101:30 blade cover, 199:5 tables, 66:13, 165:45 Jig, 211:12 beveling odd, 135:5 compound miter, 129:16 cutting tenons with, task lamps, 89:24, acrylic spray, 157:47 block plane geometry, framing square as, 105:5 146:15 176:11 adhesive 46:18 for lantern lamp, 115:30 guide, 192:7 tension lever warning see also Contact cement; blocks for cutting, 176:5 locking system, 101:30 keeping in miter box, sign, 213:7 Glue cutting odd, 20:23, 78:5 for odd shaped cabinet, 187:7 tensioner, 176:12 -backed veneer, 182:9 cutting panels at, 80:16, 154:24 Western, 164:10 tires, 155:48, 158:6, construction, 134:28, 184:38 platform for pocket hole backrouting, 95:14, 176:10 153:48 table saw cut, 221:62 joinery, 136:20 106:29, 130:24, 173:43, tuning stone, 176:11 iron-on, 34:24 aniline dye, 87:30, 97:12, for plywood, 143:29 184:45 wheel brush, 176:11 for outdoor projects, 123:18, 143:17 rocker seat/back, 222:65 baker’s rack, 210:34 zero-clearance opening, 3:11 antiquing for round pieces, 126:4 ball catches, 113:25, 145:5 remover, 110:5 brass, 97:30, 162:39 shelf brackets as, 162:5 130:24, 143:18 band saw blades residue removal, 91:5 furniture, 161:46 for shutters, 151:25 bamboo, working with, all about, 88:12 spray, 134:29 hardware, 167:46 for small projects, 115:5 217:10 folding, 177:50 Adirondack furniture anvils, hammers as, 156:7 squaring, 191:4 band clamps installing, 10:3, 93:5 chair, 69:16 apothecary cabinet, 97:20 stave clamping, 156:38 assembly tip, 211:49 Lenox carbide-tipped, settee, 69:24 aprons tambour, 187:30 basic tool, 60:23, 192:15 adzes, 25:23 frames, 199:38 trivet, 187:31 128:15, 187:8 must-have, 159:10 air cleaners vs. dust joinery, 188:34 assembly squares, 199:27 blocks for, 100:5 organizing cuff, 209:7 collection, 181:50 mitered, 139:13 assembly tables corner protectors, 110:5 recycling in scroll saw, air filters Pack Rack Tool Apron, adjustable, 105:4 inner tube, 213:5 119:4 furnace, 85:19 197:13 pocket hole joinery, storage, 184:7 for resawing, 88:13 modified box fan as, rails, 188:25 190:16 band saw accessories stabilizer, 176:12 135:5 aprons (clothing) assembly techniques bandrollers, 176:12 storing, 191:5 shop-made, 95:22 disposable, 182:7 with clamps, 211:48 Cool Blocks, 66:23, tension, 102:5, 161:4 air tools magnets in pocket, dry fitting, 91:23, 176:11 tooth patterns, 68:30 compressor hose caddy, 151:7 180:15, 211:50 dust collection, 153:7 untracked, 52:23 143:4 arbors, garden, 111:6, goof-proof glue-ups, featherboards, 165:45 band saw box, 51:10 compressors, 197:10 136:31 135:22 guide blocks, 66:23, gun plugs, 109:5 arches hand drill, 196:11 assembling, 213:19, hose reel, 220:14 213:32 airplane, toy, 35:8 bookends, 145:18 WoodsmithCustomerService.com alcohol, denatured, 53:21 flexible guide, 180:28 alignment jigs headboard, 145:6 ONLINE SUBSCRIBER SERVICES drawer pull, 93:18 molding, 67:26, 145:16 VIEW your account information table saw, 172:14 segmented, 104:32 • alignment pins, installing, arcs • RENEW your subscription see also Ellipses 158:30 • CHECK on a subscription payment Alisam Sharpening Sled, adjustable marking 187:14 gauge, 171:4, 222:7 • PAY your bill allen wrenches band saw jig, 172:6 • CHANGE your mailing or e-mail address guide, 182:6 band sawing multiple, • VIEW/RENEW your gift subscriptions holder, 89:5 87:4 aluminum bending form, 168:24 • TELL US if you’ve missed an issue polishing tubing, 166:33 beveled, 176:25 working with, 118:14 cutting jig, 153:4, 172:6 CUSTOMER SERVICE Phone: 800-333-5075 Amana tools drawing, 88:15, 102:17, E-Z Dial, 151:9 204:7 SUBSCRIPTIONS EDITORIAL In-Tech router bits, Plexiglas form, 98:4 Customer Service Woodsmith Magazine 181:10 sanding blocks, 102:29 P.O. Box 842 2200 Grand Avenue Ultra-Glide roundover stopped, 181:27 Des Moines, IA 50304-9961 Des Moines, IA 50312 bit, 221:13 armoires [email protected] [email protected] Woodsmith Index 2015 2 Band saw circle-cutting jigs Block planes band saw circle-cutting quick-action, 207:9 traditional oak, 207:32 182:22, 187:22 divided, 122:27 jigs shop-made, 108:5, 186:6 beeswax trestle, 23:24 from gutters, 163:7 Accuright Circle Cutting steel, 207:9 dispensers, 99:5, 102:5 woven-seat, 186:24 hardware, 121:33, 139:5, Jig, 211:12 storage, 137:28, 143:4, food-safe finish, 192:47 benchtops 167:45, 195:6 adjustable, 51:19, 52:3, 172:4, 218:6 and oil finish, 173:47 see also Butcher block letter, 172:16 130:25, 165:45 bar (furniture), 209:32 belt buckle, 10:6 tops open, 102:22 with pivot pin, 130:25, bar gauges, 217:60 belt clips, magnetic, 166:9 bamboo flooring portable, 115:33 194:28 barrel bolts, 210:7 belt sanders replacement, 218:8 tilt-out, 162:20 Uniquest, 89:24 barrel cut, 168:42 about, 173:10 edge-grain, 193:40 bird feeders, 106:24 band saw fences barrels, redwood plant, basics, 158:10 laminated, 100:14, birdhouses add-ons, 165:44 3:3 choosing, 192:10 200:34 cylindrical, 130:26 adjustable resaw, 164:4 barrister’s bookcases, cleaning, 94:4, 94:5 plywood/Masonite, doubledecker, 117:31 Kreg precision, 176:13 29:16, 134:6 fences, 112:5, 170:6, 74:24 log cabin, 57:16 magnetic, 105:34 barrister’s CD case, 176:6 power tools mounted on octagonal, 117:24 micro-adjustable, 82:13 137:22 graphite platen, 192:11 interchangeable, 66:3 biscuit fasteners, 103:5, resaw, 216:11 baseboards, 207:36 lathe-driven, 220:23 bending 184:9 simple, 216:4 bathroom projects stand, 10:10 see also Kerf biscuit joiners -- see Plate band saw jigs cabinets, 17:10, 37:14 tips for using, 90:18 forms, 168:24, 197:32, joiners see also Band saw sink stand, 212:22 Work Sharp attachment, 216:31 biscuit joinery -- see Plate circle-cutting jigs towel rack, 213:16 200:13 illusion of, 155:36 joinery arc-cutting, 153:4 batteries, rechargeable, Bench Cookie, 193:10 jigs, 179:15, 179:19 biscuit slots, table saw cutting short dowels, 78:30, 174:8 Bench Dog tools steam, 197:49, 202:10, cut, 88:5, 182:6 60:3 bead molding Pro-Cut, 205:13 216:42 biscuits dovetails, 66:12 about, 174:48 ProTop, 210:6 techniques, 197:48 storing with silica gel, pin, 66:16 cove and, 208:29 table leg, 180:49 bent lamination 179:7 pivot block, 123:29 shop-made, 168:31, bench dogs coat rack hooks, 119:22 bit guard, 131:17 radius, 172:6 177:33, 192:22, about, 50:15, 133:13 curved legs, 168:22 bits seat slat, 222:65 192:31 adjustable, 173:5 curved stretcher, 161:22 see also Countersinks; siding blanks, 222:8 beading all about, 178:8 firewood carrier, 119:14 Drill bits; Hollow tail, 66:14 see also Bead molding alternative to, 179:6 hardwood, 197:48 chisel mortisers; wedge, 104:4 backboards, 123:24 extension, 111:4, 121:5 technique, 72:6, 119:18, Router bits wheeled hold-in, 68:5 boards, 124:21 holes for, 101:29 179:14 brad point, 45:4, 124:15, band saw techniques cock, 192:31, 192:38, pads, 190:7 Bessey tools 166:13 see also Resawing on 192:48 routing holes, 200:27 corner clamps, 157:10 brads as, 134:4 band saw panels, 146:26, 146:34 shop-made, 28:3, 88:15, DuoKlamp, 178:11 carbide-tipped, 23:23 curved profile, 169:15, picture frames, 121:22 109:5, 153:6, 205:6 KliKlamp, 178:11 centering, 124:14 188:34, 213:48 router table cut, 159:29 stopping up holes, 119:4 PowerGrip, 178:11 cleaning, 137:5 cutting multiples, 23:3, router/table saw cut, bench grinders -- see Varioclippix, 162:11 installing small, 186:7 56:3 195:41 Grinders bevel gauges for metal, 118:14 dovetails on, 149:6 table saw jig, 16:3 bench grippers, 193:10 sharpening jig with, pilot, 56:22, 58:3 kerf cuts, 77:15 traditional trim, 152:37 bench hooks, 155:5, 118:32 quick change, 89:25 pattern sawing, 222:16 Beall Tool Company 162:43 sliding, 174:43, 183:11 rotary tool, 185:11 perfect cuts, 196:44 Tilt Box, 193:12 bench horse, 162:43 traditional tool, 206:10 shaper, 12:3 plug cutting, 90:5 Wood Buff, 203:46 bench planes, 23:16, Woodsmith staff favorite, stop collars for, 88:4 slot cutting, 73:19 beam compasses, shop- 23:20, 203:48, 217:14 85:29 Black and Decker tools tapers, 153:31, 176:24, made, 26:3, 69:22, 91:20, bench stops, 64:3, 172:5, beveling jigs palm sanders, 33:7 191:34, 203:15 180:7 210:7 for inlay strips, 80:5 routers, 31:16, 31:18 band saws bed-side stands -- see bench vises -- see Vises router, 104:13, 127:14, Workmate, 212:12 balancing, 172:5 Night stands benches 208:28 blade inserts -- see Inserts basics, 51:16 beds see also Garden table saw, 220:65 blades drift, 82:16 see also Headboards benches; Workbenches bevels see also Saw blades setup, 134:4 bunk, 21:23, 38:18 beaded-panel, 146:28 on
Load more

Recommended publications
  • Dado Blade BASICS Dead-On Dadoes, Grooves, and Rabbets Are Easy to Cut When You Know Which Type of Dado Blades to Buy and How to Use Them
    TOOLS & TECHNIQUES SERIES Plans NOW® www.plansnow.com Dado Blade BASICS Dead-on dadoes, grooves, and rabbets are easy to cut when you know which type of dado blades to buy and how to use them. WOBBLE DADO A single blade riding on a hub. hile one of the most One downside of a wobble It adjusts for different widths. useful tools for cut- blade is that it may leave a cut Wting joints is a dado with a concave bottom. This can blade, selecting which type to be reduced by using a V-blade. It’s buy can be a little bit confusing. still a wobble-style, but instead it To simplify it, all you need to has two blades mounted on a hub. know is that dado blades fall into Adjusting the hub pushes the three distinct categories: “wob- blades apart at one edge, creating V-BLADE DADO ble” blades, “V-blades,” and a “V” that cuts a wide kerf. “stack” sets. Okay, now let’s get to my Two blades riding on a center Wobble blades have a single favorite:a stack dado set.It’s made hub, also adjustable. 1 blade that rides on a hub. The up of two /8"-thick outer blades hub has a couple of wedge- (trimmers) with additional chip- shaped adjusters in it. As you per blades that can be sand- adjust the position of the wedges, wiched between the trimmers to the blade actually tilts at an angle make wider cuts. to the saw’s arbor.And, when you Stack sets take a little more turn the saw on, the blade “wob- care in setting up, but the dadoes STACK DADO bles” back and forth to make a and grooves they cut will have wide cut — a dado, groove, or clean, flat bottoms with little Outer blades with chipper rabbet.
    [Show full text]
  • Massachusetts Clean Marina Guide: Strategies to Reduce
    4.2 Boat Cleaning Cleaning boats and boat equipment is important for aesthetics and longevity.Some of the soaps and solvents commonly used in cleaning boats can be toxic to marine life. Consequently,it is important to educate boaters about environmentally–sound cleaning products and practices. Set an example for your boating guests by selling and using “green” products while providing boat cleaning services by the marina. LEGAL REQUIREMENTS The following laws apply to boat cleaning activities. If you perform boat cleaning ser- vices at your facility, please read the summary of these regulatory programs in Chapter 6. • Massachusetts Air Quality Regulations • Massachusetts Clean Waters Act • Massachusetts Hazardous Waste Regulations Best Management Practices Consider employing the following BMPs for environmentally-protective boat clean- ing methods. > Designated Maintenance Areas: Cleaning should be restricted to designated maintenance areas. See section 4.1 for more information. > Natural Cleaners: Promote the use of natural cleaners at your marina. The most natural cleaner you can use is water. Scrubbing a dirty section of your boat with a rag soaked with water can be as effective as any cleaning agent if you apply more Consider This “elbow grease.”Other natural cleaners that can be very effective include lime juice, borax, and baking soda. Because even natural cleaners can have a negative effect on Try cleaning with water and some extra “elbow grease” before relying the environment, use them in moderation. on cleaning products. People forget > Biodegradable Soaps: When a boater needs to use a detergent, suggest phosphate- that water is one of the best sol- vents available.
    [Show full text]
  • Exercises in Wood-Working, with a Short Treatise on Wood;
    '^^ %."^o* ^r c. .^^~:, "<^^ '^' V ..^"^ .o"^ cO.".-* V^o " A.'^'' ..^'r- v^^ v^' y ,t'», < '-^0^ /. CV « o,. *r;.' aO ^. 'bV" X-O-T- i'^'V. .<•*' • 'VJ"""^^ ' o „ » <vf^ > V »*•»' ^ aO s' EXERCISES IN WOOD-WORKII^G WITH A SHORT TREATISE ON WOOD WRITTEN FOR MANUAL TRAINING GLASSES IN SCHOOLS AND COLLEGES BY IVIN SICKELS, M. S., M. D. ^ NEW YOKE D. APPLETON AND COMPANY 1890 K Copyright, 1889, By D. APPLETON AND COMPAlSfY. i-'3}P') PREFACE. The exercises in wood-working in this book were pre- pared by me during the summer of 1883, for the students of the College of the City of New York. Subsequent teaching suggested many changes and additions, until the manuscript was scarcely presentable. This manuscript has been copied for other schools ; and now, in order that those who have recently asked for it may receive it in better shape, this little volume is printed. I am indebted to Mr. Bashford Dean for the part relat- ing to injurious insects, which was written expressly for this book. I. S. New York, September, 1889. CONTENTS PAGE Introduction = , 7 Part First.—Wood. Structure of wood 13 Composition of wood 18 Branching of stems 19 Age of trees .20 Decay of trees 20 Season for cutting 21 Milling 31 Drying of wood 22 Warping 23 Properties of wood 24 Defects in wood 28 Measure and value of wood 29 Kinds of wood 30 Table of chief qualities of wood 38 Wood and iron 38 Wood-working trades 39 Parasitic plants . .41 Timber-borers 45 Preservation of wood 52 Part Second.—Exercises.
    [Show full text]
  • Frameless Cabinet Construction
    Wolverine Brand Cabinetry Econ Line - Frameless Cabinet Specifications Cabinet and Door Design: Overlay doors and drawer fronts with 3/16” reveal Doors and drawers are soft close Wood options are Soft Maple, Red Oak, Knotty Oak, and Cherry in a variety of stain options Painted doors are MDF with 5 paint color options 4 door style options: Richmond, Madison, and Harvest door styles are 2 ¼” frame Reno door style is a slab door Slab drawer fronts – outside profile will match outside profile of door selected Cabinets up to 36” wide have bi-parting doors, no partition or center stile Base Cabinets: 18mm cabinet grade plywood sides, top, and bottom in birch with UV coating and PVC edge-banding ¼” birch plywood back with UV coating and ¾” hanging rail ¾” birch plywood full depth adjustable shelf with metal shelf pins Dovetail joined 5/8” solid maple drawer box with ½” bottom Blum full extension, soft close, under mount drawer slides Blum 3-way adjustable soft close hinges Cabinet sides are ¾” wide loose panels to be installed on site to sit flush with face of door / drawer Wall Cabinets: 18mm cabinet grade plywood sides, top, and bottom in birch with UV coating and PVC edge-banding ¼” birch plywood back with UV coating and ¾” hanging rail ¾” maple plywood full depth adjustable shelf with metal shelf pins Standard 12” deep wall cabinets Blum 3-way adjustable soft close hinges Cabinet sides are ¾” wide loose panels to be installed on site to sit flush with face of door / drawer Wall cabinet bottoms are natural birch .
    [Show full text]
  • Dura Supreme Cabinet Comparison
    Dura Supreme Cabinet Comparison Crestwood Designer Bria Alectra 4 Frameless or Frameless or “Full-Access” 3/4” X 1-1/2” Solid Hardwood Face “Full-Access” 6 Construction with 1 Construction Frames with I-Beam Construction Construction with coordinating PVC wood edge banding 2 edge banding 1/2” thick 3/4” thick 3/4” thick 2 End Panels Furniture Board or 1/2” Plywood Furniture Board or Furniture Board or 5 Plywood upgrade Plywood upgrade Plywood upgrade 1/2” thick 3/4” thick 3/4” thick 3 3 Top/Bottom Furniture Board or 1/2” Plywood Furniture Board or Furniture Board or Plywood upgrade Plywood upgrade Plywood upgrade 1 7 1/2” thick 1/4” MDF core 1/4” MDF core Furniture Board or 1/2” Plywood 4 Back with Hanging Rail with Hanging Rail Plywood upgrade Adjustable 3/4” thick 3/4” thick 3/4” thick Crestwood and Designer 5 Furniture Board or 3/4” Plywood Furniture Board or Furniture Board or Shelves Plywood upgrade Plywood upgrade Plywood upgrade Premium 5/8” solid Premium 5/8” solid 5/8” hardwood box 5/8” hardwood Drawer box Maple box with Maple box with 4 with furniture box with furniture dovetailed joints dovetailed joints 6 & Roll-out dovetailed joints dovetailed joints sanded & finished - sanded & finished - Shelves 6 eased top edge eased top edge Blumotion Soft Close Full Extension Undermount Glides Glides for drawers and roll-out shelves 2 7 Toe Kick 4 1/2” High x 3” Recess Finished to Match Maple Woodgrain Maple Woodgrain Maple Woodgrain 5 Cabinet Print or Maple Veneer Print or Print or Interior Maple Veneer with Natural Finish Maple Veneer Maple Veneer 3 with Natural Finish with Natural Finish with Natural Finish 7 Matching Wood Matching Wood Matching Wood Matching Wood 1 Finished Ends Veneer Veneer Veneer Veneer Fully Adjustable Fully Adjustable Fully Adjustable Fully Adjustable with Optional Soft with Optional Soft Hinges with Soft Close with Soft Close Bria and Alectra Close Close ©Dura Supreme Inc.
    [Show full text]
  • Cordless Jigsaw MANUAL INSTRUCTION (Model CL180JS)
    Cordless Jigsaw INSTRUCTION MANUAL (Model CL180JS) PART NO. 912236 - 05-20-04 Copyright © 2004 Delta Machinery To learn more about DELTA MACHINERY ESPAÑOL: PÁGINA 15 visit our website at: www.deltamachinery.com. For Parts, Service, Warranty or other Assistance, please call 1-800-223-7278 (In Canada call 1-800-463-3582). SAFETY GUIDELINES - DEFINITIONS This manual contains information that is important for you to know and under- stand. This information relates to protecting YOUR SAFETY and PREVENTING EQUIPMENT PROBLEMS. To help you recognize this information, we use the symbols below. Please read the manual and pay attention to these sections. indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. indicates a potentially hazardous situation which, if not avoided,could result in death or serious injury. indicates a potentially hazardous situation which, if not avoided,may result in minor or moderate injury. used without the safety alert symbol indicates potentially hazardous situation which, if not avoided, may result in property damage. Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known (to the State of California) to cause cancer, birth defects or other repro- ductive harm. Some example of these chemicals are: ● lead from lead-based paints ● crystalline silica from bricks and cement and other masonry products ● arsenic and chromium from chemically-treated lumber Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, always wear MSHA/NIOSH approved, properly fitting face mask or respirator when using such tools.
    [Show full text]
  • Zilco Bit Catalogue Volume 1
    ZILCO BIT CATALOGUE VOLUME 1 IF IT’S BRANDED ZILCO, IT’S BRANDED QUALITY. zilco.net www.zilco.net 1 ZILCO BITS BIT SIZING Mouthpiece Sizes CM Inches Horse Size 9cm 3 1/2” Extra Small Pony 10cm 4” Shetland/Small Pony 11.5cm 4 1/2” Pony 12cm 4 3/4” Pony 12.5cm 5” Cob 13.5cm 5 1/4” Cob 14cm 5 1/2” Full Size 14.5cm 5 3/4” Full Size Ring Size 15cm 6” Extra Full Size How to Measure Bits Mouth Size We suggest using a piece of string to measure from one corner of the Mouth horse’s mouth to the other. Thickness The mouthpiece should ideally Cheek be 19mm (3/4”) larger than this Length measurement. A couple of wrinkles on either side of the horse’s mouth is a good guide that the bit is sitting in the correct place. MATERIALS Stainless Steel Unless otherwise specified, all Zilco bits are made from 18/8 Stainless Steel Gold Zilco Gold range of bits contain a special mix of copper (85%) and quality metals which produce a bit with superior strength. Guaranteed ‘nickel free’ reducing the risk of nickel allergies. The horse is encouraged to salivate through the activity of chewing. This is a material designed to discolour over time, further enhancing the effect of acceptance. Sweet Iron Sweet Iron bits are designed to rust. This effect makes the bit become sweeter and further encourages acceptance of the bit by the horse. Blue Steel Blue steel bits are an improved version of black steel (Sweet Iron), that causes it to oxidise quicker.
    [Show full text]
  • Massachusetts Clean Marina Guide: Strategies to Reduce
    MASSACHUSETTS CLEAN MARINA GUIDE Strategies to Reduce Environmental Impacts A Coastal Zone Management/EOEA publication Massachusetts Clean Marina Guide Strategies to Reduce Environmental Impacts Prepared by Epsilon Associates, Inc. for the Massachusetts Office of Coastal Zone Management April 2001 Table of Contents Chapter One: Introduction 1.1 The Case for Clean Marinas ............................................................1-1 1.2 The Guide and the Marina Assistance Program ................................1-2 1.3 Marina Regulations........................................................................1-4 1.4 Who Should Use this Guidebook ....................................................1-4 Marinas ................................................................................................1-4 Yacht Clubs ..........................................................................................1-4 Boatyards ..............................................................................................1-4 Municipalities........................................................................................1-5 Boaters..................................................................................................1-5 Do-It-Yourselfers ..................................................................................1-5 1.5 Guide Purpose and Organization ....................................................1-6 Chapter Two: The Coastal Environment and Pollution Impacts 2.1 The Massachusetts Coast................................................................2-1
    [Show full text]
  • Chippendale Mirror
    uring the late 18th century, elaborately framed mirrors, known as looking glasses, served as testimonials to the Dwealth of their owners. A looking glass similar to the one shown here would have cost the owner 10 to 12 shillings, a hefty price considering that the average wage for a skilled tradesman of the time was about 6 shillings a day. This is the first serious piece I give my students to make. Be- cause I’m blending a traditional piece into a modern curricu- lum, I don’t go nuts over historical precedence and technique, and I take full advantage of modern machinery. For a small project, this mirror introduces a wide range of skills from basic design and layout to veneering and scrollwork. Each year, my class ends up with a great collection of stunning mir- rors that they present as thank-you gifts to mom and dad for the thousands doled out for tuition. Begin by constructing a two-layer frame Despite its elaborate appearance, this project has only two main parts. The frame, which I make first, consists of a visible mitered molding in mahogany that sits on top of a poplar subframe; sur- rounding it are scrollsawn parts made from a shopmade core with figured veneer (in this case makore) as the face veneer and plain veneer on the back. The common way to build a frame is to use 3⁄4-in.-thick primary Build a wood and miter the corners. Even when the joints are splined or Chippendale Mirror nailed, this is a poor approach.
    [Show full text]
  • Wood Identification and Chemistry' Covers the Physicalproperties and Structural Features of Hardwoods and Softwoods
    11 DOCUMENT RESUME ED 031 555 VT 007 853 Woodworking Technology. San Diego State Coll., Calif. Dept. of Industrial Arts. Spons Agency-Office of Education (DHEA Washington, D.C. Pub Date Aug 68 Note-252p.; Materials developed at NDEA Inst. for Advanced Studyin Industrial Arts (San Diego, June 24 -Au9ust 2, 1968). EDRS Price MF -$1.00 He -$13.20 Descriptors-Curriculum Development, *Industrial Arts, Instructional Materials, Learning Activities, Lesson Plans, Lumber Industry, Resource Materials, *Resource Units, Summer Institutes, Teaching Codes, *Units of Study (Sublect Fields), *Woodworking Identifiers-*National Defense Education Act TitleXIInstitute, NDEA TitleXIInstitute, Woodworking Technology SIX teaching units which were developed by the 24 institute participantsare given. "Wood Identification and Chemistry' covers the physicalproperties and structural features of hardwoods and softwoods. "Seasoning" explainsair drying, kiln drying, and seven special lumber seasoning processes. "Researchon Laminates" describes the bending of solid wood and wood laminates, beam lamination, lamination adhesives,. andplasticlaminates."Particleboard:ATeachingUnitexplains particleboard manufacturing and the several classes of particleboard and theiruses. "Lumber Merchandising" outhnes lumber grades andsome wood byproducts. "A Teaching Unitin Physical Testing of Joints, Finishes, Adhesives, and Fasterners" describes tests of four common edge pints, finishes, wood adhesives, and wood screws Each of these units includes a bibhography, glossary, and student exercises (EM) M 55, ...k.",z<ONR; z _: , , . "'zr ss\ ss s:Ts s , s' !, , , , zs "" z' s: - 55 Ts 5. , -5, 5,5 . 5, :5,5, s s``s ss ' ,,, 4 ;.< ,s ssA 11111.116; \ ss s, : , \s, s's \ , , 's's \ sz z, ;.:4 1;y: SS lza'itVs."4,z ...':',\\Z'z.,'I,,\ "t"-...,,, `,.
    [Show full text]
  • Section 400: Architectural Cabinets
    Standing & Running Trim Section 300 ARCHITECTURAL CABINETS ARCHITECTURAL 300 SECTION © 2003 AWI/AWMAC - 8th Edition Quality Standards 400 116 Architectural Cabinets Section 400 Architectural Cabinets Architectural Cabinets Section 400 Section 400 Section 400 Selection and Specification Checklist Because most architecture, specification, and design firms have electronic master specifications in place, the AWI and AWMAC offer this quick checklist. A review of these items may help the design and specification team issue a complete and accurate contract document and avoid missing things vital to the successful completion of the project. The checklists are not considered a part of the Quality Standards for the purposes of compliance. Part 1. GENERAL 1.1. REFERENCES A. AWI/AWMAC Quality Standards Illustrated (QSI), current edition 1.2 SUBMITTALS A. Shop drawings: • Submit two copies; one of which will be returned with reviewed notations prior to commencement of work under this section. • Indicate plans and elevations, materials, surface grain directions, profiles, assembly methods, joint details, fastening methods, accessories, hardware, compliance with specified fire-retardant treatments, preservative treatments, and 400 schedule of finishes. 400 B. Finish samples: • When appropriate, submit one or more samples of veneer-on-substrate, 200 x 250 mm [8 x 10"] illustrating expected range of component finish color and/or grain. • When appropriate, submit one or more samples of solid lumber, 300 square centimeters [50 square inches] illustrating expected range of component finish color and/or grain. • The sample shall bear identification of the project, architect or designer, general contractor, woodwork manufacturer, items to which the finish applies and the system utilized to attain the finish.
    [Show full text]
  • Workmate Sawbuck by Tinkerjim on August 20, 2013
    Food Living Outside Play Technology Workshop Workmate Sawbuck by TinkerJim on August 20, 2013 Table of Contents Workmate Sawbuck . 1 Intro: Workmate Sawbuck . 2 Step 1: . 2 Step 2: . 2 Step 3: . 3 Step 4: . 3 Step 5: . 4 Step 6: . 4 Related Instructables . 5 Advertisements . 5 http://www.instructables.com/id/Workmate-Sawbuck/ Author:TinkerJim Emeritus Professor of Mathematics. Intro: Workmate Sawbuck With two simple wooden crosspieces, a Workmate becomes a solid and stable sawbuck. Step 1: The jaws of the Workmate clamp and hold the sawbuck vee pieces securely. Step 2: These photos show in detail how the Workmate jaws hold the sawbuck pieces. They are gripped from above and below in a wedging manner and 'alternate' in such a way that great lateral stability is realized. http://www.instructables.com/id/Workmate-Sawbuck/ Step 3: The vees shown here were made from 13" lengths of good 2x4. They are actually "X" shapes with two short legs, the latter being long enough for the Workmate jaws to grip from below as shown in the previous step. The short legs on the prototype shown here are about 1-1/2" long. The angle between the legs is about 85° which is the largest angle our Workmate jaws would accommodate. Four 3" deck screws hold each crosspiece together - two from one side and two from the other. A tight clearance hole was drilled through the 'top' piece to preclude splitting which would adversely affect rigidity. Also, waterproof glue was used to ensure absolute rigidity (but mostly because this tinkerer likes to use glue !).
    [Show full text]