BIO-DATA Dr. Hemant Kumar

1. Name : Dr. HEMANT KUMAR 2. Designation : ASSISTANT PROFESSOR 3. Department : MECHANICAL ENGINEERING 4. Date of Birth : 14.06.1980 5. Address : Department of Mechanical Engineering Punjabi University, Patiala, 147002 Mobile : 09592466014 E-mail : [email protected] 6. Areas of Specialization : Heat transfer, CFD, Fluidized bed combustion

7. Academic Qualification:

Sr. No. Degree held Year University % marks Subjects 1. B.Tech 2002 PTU 68.5 Mechanical Engineering 2. M.Tech 2008 PTU 67.8 Thermal Engineering 3. P.hD 2017 Thapar - Mechanical University Engineering

8. Membership of Professional Bodies/Organizations Life member – ISTE (Indian Society of Technical Education)

9. Details of Experience:

Sr. Name of the Institution Position held Duration Job responsibility No. 1. IET, Bhaddal, Punjab lecturer Aug., 2003 to May Teaching 2008 2. IET, Bhaddal, Punjab Sr. lecturer June 2008 to July Teaching 2008 3. IET, Bhaddal, Punjab Assistance July 14, 2008 to Teaching & Research Professor December 26, 2011 4. Punjabi Uni. Patiala Assistance December 27, 2011 Teaching & Research Professor till date

10. Published work (numbers only): a. Research papers in Journals: International: 12 b. Conference Proceedings: 21 c. Books: 1

11. M.Tech students guided (Details):

S. Name of the Title of Thesis Supervisors Year of No. Student & Roll Completion No. 1. Paramjit Dhiman Studies on performance of a water cooled heat Er. Hemant Kumar March, 2010 ( 04171106) sink

2. Sanjay Kumar Field Study and Numerical Simulation of Er. Hemant Kumar October, (11193014) Bubbling Fluidized Bed Combustor Based on 2013 Co - firing 3. Manvir Singh Influence of Tool Shape on Mechanical Er. Hemant Kumar October, (11193024) Properties and Microstructure of Friction Stir Er. Parminder Singh 2013 Welded Aluminium Alloys 4. Manish Rajoria Modeling of Fluidized Bed Combustion Based Er. Hemant Kumar October, (11193051) on Rice Husk 2013 5. Maninder Singh To Study The Effect of Aging Time and Aging Er. Hemant Kumar July 2014 (11173021) Temperature on Biogenically Derived Bi – Er. Ravinder Pal Phasic Calcium Phosphate Powders and Corals Singh

6. Varinder Singh Effect of Plenum Shape on Thermo Hydraulic Er. Hemant Kumar September, (11293035) Performance of Microchannel Heat Sink Dr. S.S.Sehgal 2014

7. Gurbir Singh CFD Analysis of Shell and Tube Heat Er. Hemant Kumar February, (11293050) Exchanger 2015 8. Narinder Singh Comparative Study of Finishing Aluminium Er. Hemant Kumar May, 2015 (11173012) Tube Using Different Magnetic Abrasives Er. Jagdeep Singh Gill 9. Mohit Gaba Field Study and Modeling of Real Plant Er. Hemant Kumar July, 2015 (11173038) Bubbling Fluidized Bed Combustor Based on Dr. S.K.Mohapatra Biomass & Co-firing

10. Nitish Kumar Experimental Investigation of process Er. Hemant Kumar February, (112730220 parameters for rapid prototyping technique Er. Jagdeep Singh 2016 (Selective Laser Sintering) to enhance the part Khurmi quality of prototype by Taguchi method

11. Harmeet Singh Modeling and Analysis by Response Surface Er. Hemant Kumar February, (11393014) Methodology of Hardness and Impact toughness Er. Rajdeep Singh 2016 for Submerged Arc Welding Joints Using Developed Agglomerated Fluxes

12. Harpreet Kaur Experimental Investigation & Modeling of Er. Hemant Kumar February, (11393023) Fluidized Bed Combustion Fuelled by Rice Er. Rajdeep Singh 2016 Husk & Pet Coke

13. Maniratan Singh Study, Analysis & Experimentation of Graphene Er. Hemant Kumar August, based Nanoplatlets Nanofluid in Rectangular 2016 (11493041) Microchannel Dr. Harry Garg 14. Bhupinder Singh Experimental Investigation of Heat Transfer Er. Hemant Kumar August, through Different Shapes of Microchannels Dr. Harry Garg 2016

12. List of Papers/Courses taught at P.G. and U.G. Level  Heat & Mass Transfer  Refrigeration & Air conditioning  Industrial Quality Control  Fluid Machinery  Power Plant engineering  Management of Production Systems 13. List of Papers Published Research Papers in Journals

1. Hemant Kumar, S.K. Mohapatra, Ravi Inder Singh (2017), “Review on CFD Modelling of Fluidized Bed Combustion Systems based on Biomass and Co-firing”, J. Inst. Eng. India Ser. C, DOI 10.1007/s40032-017-0361-2 2. Mohit Gaba, Hemant Kumar, S.K. Mohapatra (2017), “ Modeling of Bubbling Fluidized Bed Combustor Based on Biomass & Co-firing”, Materials Today: Proceedings, 4, pp.1615–1625 3. Narinder Singh, Hemant Kumar, Jagdeep Singh Gill (2016), “Internal finishing of Aluminium tube with sintered magnetic abrasive”, International Journal of Engineering and Applied Sciences, vol.3, pp.76-79. 4. Nitish Kumar, Hemant Kumar, Jagdeep Singh Khurmi (2016), “Experimental Investigation of process parameters for rapid prototyping technique (Selective Laser Sintering) to enhance the part quality of prototype by Taguchi method”, Procedia Technology (Elsevier), vol. 23, pp. 352 – 360. 5. Hemant Kumar, S.K. Mohapatra, Ravi Inder Singh (2015), “Three-dimensional CFD modeling of a fluidized bed combustor fuelled by biomass and coal”, Materials Research Innovations (SCI, Taylor & Francis), vol. 19, 8, pp. 118-124. 6. Hemant Kumar, S.K. Mohapatra, Ravi Inder Singh (2015), “Study of a 30 MW bubbling fluidized bed combustor based on co-firing biomass and coal”, Sadhana – Academy Proceedings in Engineering Sciences (SCI, Springer),vol. 40, Part 4, pp. 1283–1299. 7. Hemant Kumar, Mohit Gaba (2015), “Study of Bubbling Fluidized Bed Combustor Based on Co-Firing Biomass & Coal”, International Journal of Research in Engineering and Applied Sciences, vol. 5, pp 57-66. 8. Manish Rajoria, Sanjay Verma, Hemant Kumar (2014), “Mathematical Modelling of Bubbling Fluidized Bed Combustor of 12.5 MW Power Plant Based on Rice Husk,” International Journal of Advanced Information Science and Technology, vol 22, pp 131-136. 9. Hemant Kumar, Mohit Gaba (2014), “ SEM Analysis of the Agglomeration effects of Real Plant Bubbling Fluidized Bed based on Biomass”, International Journal of Multidisciplinary Approach and Studies, vol. 1, pp 171-180. 10. Gurbir Singh, Hemant Kumar (2014), “Computational Fluid Dynamics Analysis of Shell and Tube Heat Exchanger”, Journal of Civil Engineering and Environmental Technology, vol. 1, pp 66-70. 11. Manvir Singh, Hemant Kumar, Parminder Singh (2013), “Influence of Tool Shape on Mechanical Properties and Microstructure of Friction Stir Welded Aluminium Alloys”, International Journal of Innovative Research and Development, vol. 2, pp 357-363. 12. Hemant Kumar, S.S Sehgal (2013), “Study of Fluid Flow and Heat Transfer through Mini- channel Heat Sink”, Asian Journal of Engineering and Applied Technology, vol. 2, pp 25-28.

Research Papers in Conferences

1. Mohit Gaba, Hemant Kumar, “Field study and XRD analysis of the agglomeration effects of real plant FB combustor based on agricultural residues & co-firing”, IVth International Conference on Production and Industrial Engineering, 19-21 December, 2016, Dr. B. R. Ambedkar National Institute of Technology, Jalandhar, India 2. Maniratan Singh, Bhupinder Singh, Harry Garg, Inderpreet Kaur, Hemant Kumar, “Experimental and Numerical Analysis of Micro-Scale Heat Transfer using Carbon based Nanofluid in Microchannel for Enhanced Thermal Performance”, IOP Conf. Series: Materials Science and Engineering 149 (2016) 012200, IConAMMA-2016, Bangalore, India. 3. Hemant Kumar, S.K. Mohapatra, Ravi Inder Singh, “CFD analysis of a fluidized bed combustor based on co-firing”, Proceedings of the ASME International Mechanical Engineering Congress & Exposition (IMECE2015), November 13-19, 2015, Hoston, USA. 4. Mohit Gaba, Hemant Kumar, “Mathematical Modeling of Bubbling Fluidized Bed based on Co-firing”, Proceedings of International Conference on Emerging Areas of Mathematics for Science and Technology in Conjunction with 12th Annual Conference of The Indian Society of Industrial and Applied Mathematics, 30th – 1st February, 2015, Punjabi University, Patiala, India. 5. Mohit Gaba, Hemant Kumar, “Real plant field study showing the difference between combustion of Biomass fuel and Cofiring using fluidized bed combustion”, Proceedings of National Conference on Emerging Trends in Engineering & Technology, 7th – 8th November, 2014, Asra College of Engineering & Technology under the aegis of PTU, Sangrur, India, pp190 – 194. 6. Hemant Kumar, Gurbir Singh, “CFD Analysis of Heat Exchangers-A Review”, TEQIP-II Sponsored National Conference on Latest Developments in Materials, Manufacturing and Quality Control, 13th–14th February, 2014, Punjab Technical University (PTU), Giani Zail Singh (GZS) Campus, Bathinda, India, pp180-184. 7. Hemant Kumar, S.S Sehgal and Varinder Singh, “Fluid Flow and Heat Transfer through Micro- channel Heat Sink - A Review”, TEQIP-II Sponsored National Conference on Latest Developments in Materials, Manufacturing and Quality Control, 13th–14th February, 2014, PTU GZS Campus, Bathinda, India, pp247-250. 8. Hemant Kumar, Manish Rajoria, Sanjay Verma, “Simulation of Bubbling Fluidized Bed Combustor based on rice husk”, Proceedings of Ist International Conference on Mechanical Engineering Emerging Trends for Sustainability, 29th – 31st January, 2014, Maulana Azad National Institute of Technology, Bhopal, India, pp1140-1148. 9. Hemant Kumar, S. S. Sehgal (2013), “Study of Fluid Flow and Heat Transfer through Mini- channel Heat Sink”, Proceedings of International Conference on Advancements and Futuristic Trends in Mechanical and Materials Engineering, 3rd – 4th October, 2013, Punjab Technical University, Jalandhar, India, pp172-175. 10. Hemant Kumar, Manish Rajoria, Sanjay Verma, “Numerical Simulation of Fluidized Bed Combustor– A Review”, Proceedings of International Conference on Advancements and Futuristic Trends in Mechanical and Materials Engineering, 3rd – 4th October, 2013, Punjab Technical University, Jalandhar, India, pp 237-240. 11. Hemant Dhiman, Sehgal S S, “Liquid Cooling: An Advancement in Conventional Cooling Methods of Electronic Components”, International Conference on Engineering Innovations- A Fillip to Economic Development, 18th – 20th February, 2010, Continental Group of Institutes, Fatehgarhsahib, India 12. Hemant Dhiman, Sehgal S S, Dhiman Dipti, “Enhancement of Heat Transfer Through Mini channel Heat Sink”, International Conference on Innovative Technologies (IEEE sponsored), 18th – 19th June, 2009, PDMCE, Bahadurgarh, Haryana, India 13. Hemant Dhiman, Dhiman Dipti, “Design and Development of Fiber Optic Pressure Sensors for Monitoring Civil Structures”, International Conference on Innovative Technologies (IEEE sponsored), 18th – 19th June, 2009, PDM College of Engineering, Bahadurgarh, Haryana, India 14. Hemant Dhiman, Sehgal S S, Dhiman Dipti, “Advance Cooling Techniques in Electronics - A Review”, National Conference on Mechanism Science and Technology: from Theory to Application, 13th – 14th November, 2008, NIT Hamirpur, HP, India 15. Hemant Dhiman, Kumar Rakesh, “Experimental Investigation of Pressure and Temperature Drop in Single Phase Fluid Flow within a Microtube”, National Conference on Mechanism Science and Technology: from Theory to Application, 13th – 14th November, 2008, NIT Hamirpur, HP, India 16. Hemant Kumar, Sehgal S S, Singh Sarbjit, Kumar Rakesh, “Development of an Experimental set up to investigate Fluid Flow and Heat Transfer through Minichannel Heat sink”, National Conference on Emerging Trends in Mechanical Engineering, 28th – 29th August, 2008, BMS College of Engineering, Bangalore, India. 17. Hemant Kumar, Sehgal S S, Kumar Rakesh, “Micro Heat Exchanger: An Application of Microchannel”, National Conference on Trends in Mechanical Engineering, 08th – 09th February 2008, Chandigarh Engineering College (CEC) Landran, India. 18. Hemant Kumar, Kumar Rakesh, Bansal Dipti,” Vapour Compression Cooling in Electronics”, National Conference on Trends in Mechanical Engineering, 08th – 09th February 2008, CEC Landran, India. 19. Hemant Kumar, Bansal Dipti,” Design and Development of Fibre Optic based Pressure Sensor”, National Conference on Emerging Trends in Communication & IT, 24th - 25th February 2007, Ryat Institute of Engineering & Technology (RIET), Railmajra, India. 20. Hemant Kumar, Mohapatra S.K, Dhiman Vikrama,”Enhancing the Strength of Fibre Reinforced Composites by Microcracking”, National Conference on Recent Trends in Polymer Science & Technology, 06th – 07th May 2005, Thapar Institute of Engineering & Technology, Patiala, India. 21. Hemant Kumar, Mohapatra S.K, Dhiman Vikrama,” Microcracking in Fiber Reinforced Composites A Preliminary Review”, National Conference on Composite Materials, 18th – 19th March 2005, Institute of Engineering & Technology (IET) Bhaddal, India.