DOCSLIB.ORG

Military & Aerospace

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Military & Aerospace Enabling the Electronics Revolution Military & Aerospace ConnectingConnecting Peopleeople & Technology Power & Signal Power & Signal Circular Rectangular Board Level PCB / Flex Modular Distribution Solutions Attachment Systems Heavy Duty Plastic Custom Solutions Cable Assemblies www.amphenol-middle-east.com [email protected] MilitaryMilitary && AerospaceAerospace ConnectingConnecting Peopleeople & Technology Amphenol's founder Arthur J. SchmiY Amphenol’sdiscovered founder that Arthur insulaGng J. Schmitt discovered plasGc that could insulating be plastic more could be effecGvely more effectively used used to to produce produce radio radio tube sockets tube Power & Signal sockets than briYle sockets than brittle than Bakelite briYle Bakelite *Amphenol is born (1932). *Amphenol is born (1932). Circular Connectors MIL-DTL-5015 Release Plug Connectors AGE96929 (VG96929 ๏ MIL-DTL-26482MIL-­‐DTL-­‐5015 ๏ MIL-­‐DTL-­‐55116 Hermetic Connectors ๏ MICROMINIATURE Specification) Connectors ๏ MIL-DTL-38999MIL-­‐DTL-­‐26482 ๏ VG M12 Series Hermetic Connectors Miniature Connectors Ex-Proof (Atex) Solutions ๏ MIL-DTL-26500MIL-­‐DTL-­‐38999 ๏ DIGITAL Connectors NETWORK ๏ FILTER Fiber Optic Connectors Solutions MIL-DTL-83723MIL-­‐DTL-­‐26500 SoluGons Rack & Panel RNJ HERMETIC High Speed ConnectorsSolutions ๏ MIL-DTL-55181 PCB Connectors ๏ 2M Micro-38999 Circular Rectangular Board Level PCB / Flex ๏ MIL-DTL-22992MIL-­‐DTL-­‐83723 Rack Apex & PanelGalley RNJ Connector, Circular๏ EX Miniature PROOF Terrapin SoluGons ๏ MIL-DTL-55116MIL-­‐DTL-­‐22992 ๏ HIGH M-SBC SPEED Series SoluGons ๏ Fiber Stingray OpGc Magnetic SoluGons Connector ๏ 7MIL-­‐DTL-­‐55181 & 10-Pin Waterproof ๏ POWER (Subsea Booted Connectors Connector) ๏ Backshells Series Breakaway Connectors VG Series Connectors Pegasus Series Digital Network Solutions GCB-M Modular Reverse Bantam Micro Bayonet Filter Connectors Bayonet Connectors Connectors Through parGcipaGon in the war effort Breakaway Fail-Safe Lanyard Power Connectors Backshells Amphenol establishes itself as a premier Modular Distribution Solutions Attachment Systems Heavy Duty technology driven interconnect and cable company. The 5015 AN series connector is born and is soon known as the Through participation in the war effort Amphenol establishes itself as a premier technology "Amphenol Connector" by military maintenance driven interconnect crews. and cable The company. B-­‐29 Super The 5015 AN series connector is born and is soon Fortress known as the contains “Amphenol over Connector” 1600 Amphenol by military maintenance crews. The B- 29 Super Fortress Plastic Custom Solutions Cable Assemblies connectors. contains over 1600 Amphenol's Amphenol connectors. Sidney, NY Amphenol’s Sidney, NY facility is designated a site of facility is designated national a importance site of naGonal and is defended from air strikes. importance and is defended from air strikes. www.amphenol-middle-east.com [email protected] www.amphenol.com.tr www.amphenol-middle-east.com 1 3 [email protected] MilitaryMilitary && AerospaceAerospace Circular Connectors_ MIL-­‐DTL-­‐5015 MIL-­‐DTL-­‐38999 Amphenol MS and 97 series are two series of thread-­‐ MIL-­‐DTL-­‐38999 Series III Connectors offer the highest coupled connectors designed to meet the operaGng performance capabiliGes for both general duty and requirements of MIL-­‐C-­‐5015. Available in a variety of severe environment applicaGons, both in original MIL styles and classes, these connectors are primarily used in specified and Amphenol coding TV/CTV series with a range of military and industrial applicaGons where threaded coupling, scoop-­‐proof features. Al alloy, specific degrees of environmental protecGon are composite, stainless steel, marine bronze, durmalon and required. RoHS versions available. Amphenol Aerospace's MIL-­‐DTL-­‐5015 with crimp rear MIL-­‐DTL-­‐38999 Series I LJT -­‐ Series II JT release contacts provides an alternaGve to the older were developed to meet the needs of the aerospace MIL-­‐C-­‐5015 solder type. It bridges the gap between an industry, and provided the impetus for development of old connector standard and the high performance needs the MIL-­‐C-­‐38999 specificaGons. Dependable 5 key/ of current technologies. keyway polarizaGon with bayonet lock coupling is incorporated to aid and assure posiGve maGng. SJT connectors combine unique design features of the scoop-­‐proof LJT series within standard mounGng dimensions of JT types. Available in a wide range of shell sizes, finishes, insert arrangements and accessories. MIL-­‐DTL-­‐26482 Amphenol MIL-­‐C-­‐26482, Series I Connectors are miniature circular connectors with three-­‐point bayonet-­‐ coupling and five-­‐key polarizaGon, solder type, BriGsh standard 62GB, Amphenol form PT, Amphenol low cost form 62IN, these connectors are widely used in applicaGons calling for quick disconnect connectors. MIL-­‐DTL-­‐26500 Amphenol MIL-­‐C-­‐26482, Series 2 Connectors are High quality and dependability are the earned bayonet-­‐coupling type, and they feature crimp contacts reputaGons of the Amphenol®/Pyle® Series of that are rear insert able and rear releasable. They can be connectors designed to meet the specificaGon ordered through Amphenol, by military or equivalent requirements of MIL-­‐DTL-­‐26500. Serving such diverse proprietary part numbers. fields as avionics, missile systems, aircraj general-­‐ purpose applicaGons, aircraj engines and firewalls. 4 [email protected] 2 Military & Aerospace MilitaryMilitary && AerospaceAerospace Circular Connectors_ Circular Connectors Connectors_ MIL-­‐DTL-­‐5015 MIL-­‐DTL-­‐38999 MIL-­‐DTL-­‐83723 MIL-­‐DTL-­‐22992 Amphenol MS and 97 series are two series of thread-­‐ MIL-­‐DTL-­‐38999 Series III Connectors offer the highest Matrix MIL-­‐DTL-­‐83723 series provides many choices The Amphenol Class “L” 22992 heavy duty connectors coupled connectors designed to meet the operaGng performance capabiliGes for both general duty and within the range of a medium sized, environmentally are the largest size cylindricals. They are available only in requirements of MIL-­‐C-­‐5015. Available in a variety of severe environment applicaGons, both in original MIL resistant circular connector. With three coupling style the specific configuraGons prescribed by MIL-­‐DTL-­‐22992 styles and classes, these connectors are primarily used in specified and Amphenol coding TV/CTV series with choices-­‐ bayonet, threaded and quick-­‐disconnect -­‐ the for either military or industrial applicaGons. This rigid a range of military and industrial applicaGons where threaded coupling, scoop-­‐proof features. Al alloy, versaGlity of this family makes it increasingly popular for configuraGon control assures correct interconnecGon of specific degrees of environmental protecGon are composite, stainless steel, marine bronze, durmalon and panel mount, box mount and line-­‐to-­‐line applicaGons in electrical circuits for maximum safety and reliability. required. RoHS versions available. aircraj. For general duty environmentally resistant requirements, this family of connectors provides a wide Amphenol Aerospace's MIL-­‐DTL-­‐5015 with crimp rear MIL-­‐DTL-­‐38999 Series I LJT -­‐ Series II JT range of interconnecGon soluGons. release contacts provides an alternaGve to the older were developed to meet the needs of the aerospace MIL-­‐C-­‐5015 solder type. It bridges the gap between an industry, and provided the impetus for development of The Amphenol/Pyle® MIL-­‐DTL-­‐83723*, Series III old connector standard and the high performance needs the MIL-­‐C-­‐38999 specificaGons. Dependable 5 key/ Connectors were developed for the higher operaGng of current technologies. keyway polarizaGon with bayonet lock coupling is temperatures inherent in today’s high performance incorporated to aid and assure posiGve maGng. aircraj and aircraj engines. SJT connectors combine unique design features of the scoop-­‐proof LJT series within standard mounGng dimensions of JT types. Available in a wide range of shell sizes, finishes, insert arrangements and accessories. MIL-­‐DTL-­‐26482 MIL-­‐DTL-­‐55181 MIL-­‐DTL-­‐55116 Amphenol MIL-­‐C-­‐26482, Series I Connectors are Amphenol MW series power connectors are MIL These connectors are water resistant, polarized, five and miniature circular connectors with three-­‐point bayonet-­‐ Qualified & listed in QPL & meets the requirement of six contact electrical connectors for use in low voltage coupling and five-­‐key polarizaGon, solder type, BriGsh MIL-­‐DTL-­‐55116. audio frequency circuits and applicaGons. They employ standard 62GB, Amphenol form PT, Amphenol low cost three-­‐point bayonet coupling for quick disconnect and form 62IN, these connectors are widely used in MW series power connectors are with center lock self -­‐ wipe contact. Although designed for use in applicaGons calling for quick disconnect connectors. coupling screw, waterproof & polarized. Connectors communicaGons equipment, these versaGle connectors, MIL-­‐DTL-­‐26500 used for interconnecGon of power & control circuit have been successfully adapted for use in numerous Amphenol MIL-­‐C-­‐26482, Series 2 Connectors are High quality and dependability are the earned electric equipment specially in U.S. Army industrial, scienGfic and educaGonal applicaGons. bayonet-­‐coupling type, and they feature crimp contacts reputaGons of the Amphenol®/Pyle® Series of CommunicaGon System. that are rear insert able and rear releasable. They can be connectors designed to meet the specificaGon These connectors are qualified to
Load more

Recommended publications
  • Common Coaxial Connectors
    Common Coaxial Connectors Below, I present a digest of important information about coaxial connectors. Most of these are for RF and microwave frequencies, but a few of the more common ones used for lower frequencies are included for completeness. Why different connectors? Many coaxial connector types are available in the audio, video, digital, RF and microwave industries, each designed for a specific purpose and application. Much of the development of the smaller connectors that perform well into the GHz and millimeter wave range has been conducted by test equipment measurement companies. One of their considerations is the number of connect-disconnect cycles that a connector pair can withstand while still performing as expected. Why different sizes and frequencies? The frequency range of any connector is limited by the excitation of the first circular waveguide propagation mode in the coaxial structure. Decreasing the diameter of the outer conductor increases the highest usable frequency. Filling the airspace with dielectric lowers the highest frequency and increases losses. The mating process typically changes the geometry of the mating surfaces and resistance loss at those interfaces as well as geometric changes result in variation of impedance and loss. Some RF connectors are sexless (such as the HP/Amphenol APC-7 and the General Radio GR874 and GR900BT). Most connectors have female structures with slotted fingers that introduce a small inductance. The fingers accommodate tolerance variations, but reduce repeatability and may ultimately break after 1000 connections. There are slotless versions of connectors available, but they are, for the most part, relegated to instrument interfaces. Slotless female connectors are very difficult to clean and require very careful connection and disconnection.
    [Show full text]
  • Coaxial Cable
    ANALOG ELECTRICAL and DIGITAL VIDEO FORMATS and CONNECTORS Analog Electrical Formats/Connectors Component Video Component video is a type of video information that is transmitted or stored as two or more separate signals (as opposed to composite video, such as NTSC or PAL, which is a single signal). Most component video systems are variations of the red, green and blue signals that make up a television image. The simplest type, RGB, consists of the three discrete red, green and blue signals sent down three wires. This type is commonly used in Europe through SCART connectors. Outside Europe, it is generally used for computer monitors, but rarely for TV-type applications. Another type consists of R-Y, B-Y and Y, delivered the same way. This is the signal type that is usually meant when people talk of component video today. Y is the luminance channel, B-Y (also called U or Cb) is the blue component minus the luminance information, and R-Y (also called V or Cr) is the red component minus the luminance information. Variants of this format include YUV, YCbCr, YPbPr and YIQ. In component systems, the synchronization pulses can either be transmitted in one or usually two separate wires, or embedded in the blanking period of one or all of the components. In computing, the common standard is for two extra wires to carry the horizontal and vertical components, whereas in video applications it is more usual to embed the sync signal in the green or Y component. The former is known as sync-on-green.
    [Show full text]
  • MICROWAVE COAXIAL CONNECTOR TECHNOLOGY: a CONTINUING EVOLUTION Mario A
    MAURY MICROWAVE 13 Dec 2005 CORPORATION Originally published as a Feature Article in the Microwave Journal 1990 State of the Art Reference, September 1990; Updated December 2005 MICROWAVE COAXIAL CONNECTOR TECHNOLOGY: A CONTINUING EVOLUTION Mario A. Maury, Jr. Maury Microwave Corporation (a) Introduction Coaxial connectors are one of the fundamental tools of microwave technology and yet they appear to be taken for granted in many instances. Unfortunately, many engineers tend to overlook the lowly connec- tor with resulting performance compromises in their applications. A good understanding of connectors, both electrically and mechanically, is required to utilize them properly and derive their full benefit. It should be remembered that performance starts at the (b) connector. Figure 1: Precision coaxial connectors in use today; Coaxial connectors provide a means to connect and (a) 7mm and 14mm sexless connectors and (b) 3.5mm female disconnect transmission lines, components and sys- and male, type N female and male. tems at microwave frequencies. They allow accessing circuits, modularizing, testing, assembling, inter- This paper provides a brief history of coaxial connec- connecting and packaging components into systems. tors, gives an overview of coaxial connector technology today, cites sources of further informa- There is a broad variety of coaxial connectors avail- tion and takes a look into the future as connectors able today due to the various design trade-offs and continue to evolve. applications that exist at microwave frequencies, including impedance (usually 50 ohms), frequency IEEE P287 Committee of operation, power handling, insertion loss, reflec- tion performance, environmental requirements, size, In 1988, the sub-committee P287 for precision co- weight and cost.
    [Show full text]
  • Guide to RF Coaxial Connectors and Cables
    Guide to RF Coaxial Connectors and Cables Given that typical RF systems are comprised of any number of items, e.g. RF generators, amplifiers, attenuators, power meters, couplers, antennas, etc., it is not uncommon that a great deal of thought is given to these “high end” devices while mundane items such as connectors and cables are often treated as an afterthought. With a wide variety of coaxial connectors and cables available for use in the RF and Microwave spectrum not giving these essential components too much thought is a misstep and can result in undesirable system degradation. RF coaxial connectors provide vital RF links in communications, broadcast, EMC testing, commercial and military, as well as test and measurement fields. In this guide, you will learn about the different types of RF Coaxial Connectors and Cables and the various uses for each. Guidance and insight will be provided to assist in choosing connectors best suited to accommodate your specific applications. 1.0 RF Coaxial Connectors The vast array of RF connectors available can be overwhelming, but they are all characterized by just a few key parameters. The most obvious characteristic of a connector is its physical size. Other considerations include power handling and frequency range capabilities. To ensure maximum Find It Fast power transfer, the characteristic impedance of the connector should match the source and load. All of these characteristics, along with connector durability and cost, must be considered for each application. Page 2 of 9: The most commonly found connector types in RF applications are available in both male and female 3.5 mm configurations, standard and precision grades, high frequency and in some cases high power versions.
    [Show full text]
  • Electromechanical Components Guide
    Committed to excellence Electromechanical Components Guide V 4.2 Suppliers & Focus Content Connectors ..........................04-25 Rutronik Cleared Awards Once Again - Electric Vehicle Charging ..................06/07 - High Current/Power Connector ................08 21 Times on the Podium in the “Distributor of the Year” Awards - Power ..................................09 - Board-to-Board .........................10/11 Rutronik Elektronische Bauelemente GmbH has continued its series of successes in Elektronik - Input/Output ..............................12 magazine’s reader choice awards for “Distributor of the Year,” with the broadline distributor landing - Circular .................................13 on the podium a whopping 21 times: four times in first, seven times in second, and ten times - RF .....................................14 in third place - FFC/FPC ................................15 - FFC/FPC and Cable .........................16 - Wire-to-Board .......................... 17-21 - Wire-to-Wire ...........................22/23 Rutronik & Electromechanical Components - Accessories ..............................24 As a result of the changes in the industry, distributors now offer more - Card Readers .............................24 than just logistics and delivery processing, with their portfolio inclu- - Terminal Blocks ...........................25 ding consulting, maintenance, and other additional services. This - Customized Connectors .....................25 is why in the readers’ choice awards for “Distributor of the
    [Show full text]
  • Common Connector Descriptions and Maximum Frequencies
    Common Connector Descriptions and Maximum Frequencies Connector Styles Description Frequency UHF Low frequency. Used in Amateur radio/CB radio etc 300 MHz TRB (BNC Triax) Used on applications where RF shielding and minimum noise radiation are required. Based on BNC connector 500MHz TRT (TNC TRIAX) Used on applications where RF shielding and minimum noise radiation are required. Based on TNC connector 500MHz F Low cost connector commonly used in TV applications. 1 GHz BNC Commonly used low cost connector. Uses bayonet fixing mechanism. 4 GHz HN High voltage version of N connectors 4 GHz SMB Subminiature snap-on connector (50ohm or 75 ohm) 4 GHz MCX Subminiature snap-on connector. Internal line size same as SMB but overall 30% smaller. 6 GHz ABMS New Connector interface designed by Intelliconnect. Based on MCX but much sturdier, better continuity and special termination 6 GHz method for small diameter cables MMCX Micro miniature connector 6 GHz 7/16 Used on high power communications systems. Eg Base Stations. 7.5 GHz C Durable internal bayonet connector. Quick connect/disconnect. 8 Ghz SMC Subminiature threaded connector 10 Ghz SC Screwfit version of C connector 11 Ghz N Durable threaded connector available in brass or stainless steel. (50ohm or 75 ohm) 11 Ghz TNC Threaded version of BNC connector. Can be used at much higher frequencies. 11 Ghz BMA Blind mate connector. Designed for both fixed and floating configurations. 18 Ghz Precision N N connector with enhanced features allowing performance to 18GHz. 18 Ghz Precision TNC TNC connector with enhanced features allowing performance to 18GHz. 18 Ghz 7mm (APC-7) High precision genderless connector.
    [Show full text]
  • Mobile Consumer Products (Mil-Aero)
    Mobile Consumer Products www.amphenol.com.tr [email protected] Mobile Consumer Products Mobile Devices Amphenol Mobile Consumer Products (MCP) provides a broad range of components with content on the majority of the world’s mobile devices produced each year. Amphenol MCP designs and manufactures a full range of electro -mechanical interconnect products and antennas found in mobile phones, tablets, wearables and other mobile devices. Our broad product offering includes antennas, RF cables, RF switches, internal and external connectors, LCD connectors, board-to-board connectors, cord sockets, battery connectors, input -output connectors, charger connectors, metal and ceramic injection molded components, touch panels and electromechanical hinges. Our capability for high -volume production of these technically demanding, miniaturized products, combined with our industry-leading ability to react quickly to frequently changing customer requirements together with our speed of new product introduction are the critical factors for our success in this market. Amphenol MCP Locations QSales Location QSales and R&D Location QSales, R&D and Manufacturing Location 2 www.amphenol.com.tr [email protected] 3 Mobile Consumer Products MIM CIM Moving (Metal (Ceramic Touch Acrylic Sheet Sapphire Mobile Cables Antennas Mechanisms Injection Injection Panels Lens (IMD) Glass Connectors Assemblies Molding) Molding) MCP Hong Kong HQ MCP USA HQ (IL) Shanghai Amphenol Airwave Amphenol USA (IL, CA, MI) Amphenol Finland Amphenol Qujing Tekhnology Amphenol Shanzhen Amphenol Beijing Amphenol Hangzhou Phoenix Amphenol Tianjin Amphenol Changzhou Amphenol Japan Amphenol South Korea Amphenol Taiwan Amphenol Malaysia QSales Location QSales and R&D Location QSales, R&D and Manufacturing Location 2 www.amphenol.com.tr [email protected] 3 Mobile Devices Mobile Consumer Products Amphenol MCP uses state of the art technology to consistently produce high quality components for mobile applications.
    [Show full text]
  • Application Guide to RF Coaxial Connectors and Cables
    Application Guide to RF Coaxial Connectors and Cables By: Michael J. Hannon Product Applications Engineer and Pat Malloy, Sr. Applications Engineer There is a wide variety of coaxial connectors and cables available for use in the RF and Microwave spectrum. While often not much thought is given to these essential components, a misstep here can result in undesirable system degradation. Given that typical RF systems are comprised of any number of items, e.g. RF generators, amplifiers, attenuators, power meters, couplers, antennas, etc., it is not uncommon that a great deal of thought is given to these “high end” devices while mundane items such as connectors and cables are often treated as an “afterthought”. RF coaxial connectors RF coaxial connectors provide vital RF links in communications, broadcast, EMC testing, commercial and military, as well as test and measurement fields. While there is a vast array of RF connectors available, they are all characterized by just a few key parameters. The most obvious characteristic of a connector is its physical size. Other considerations include power handling and frequency range capabilities. To insure maximum power transfer, the characteristic impedance of the connector should match the source and load. All of these characteristics along with connector durability and cost must be considered in light of the specific application. This application note provides guidance and insight in choosing connectors best suited to accommodate your specific application. Let’s begin by reviewing the most commonly found connector types in RF applications. These ubiquitous “traditional” connectors are available in both male and female configurations, standard and precision grades, high frequency and in some cases high power versions.
    [Show full text]
  • RF and Microwave Coaxial Cable and Connectors
    University of Washington Electrical Engineering & Agilent Technologies RF Laboratory RF and Microwave Coaxial Cable and Connectors Routing of RF and microwave signals with minimum loss and minimum reflections requires controlled impedance lines and connectors. This requires significantly more engineering effort than the simple point-to-point wiring of low frequency electronics. Once off of a printed circuit board, the most common transmission line for RF and microwave signals is the coaxial cable. These are also the standard means for getting signals into and out of various instruments and subassemblies. Connectors for coaxial cables also play a critical role, since they must maintain the controlled impedance of the transmission line while still providing connect and disconnect service. Coaxial Cable The most critical electrical parameters for specifying coaxial cable are: (1) the characteristic impedance Z0, (2) the loss or attenuation per unit length α, and (3) the voltage breakdown strength BV. In addition, there are the mechanical parameters of outside diameter d0, tensile strength, and minimum bend radius. The characteristic impedance of a coaxial cable, or any other transmission line, fundamentally gives the ratio of the electric to magnetic field strength of an electromagnetic wave propagating along the line. For a coaxial cable, the characteristic impedance is related to the inside and outside radii of the dielectric, a and b, respectively, and the permittivity ε and permeability μ of the dielectric material, 1 376.7 Z0 ln b a ln b a . 2 2r The circuit parameters per unit length of the coaxial cable are RS 11 R /m, L ln b a H/m, 22ab 22 GC S/m, F/m.
    [Show full text]
  • Coaxial Connectors Edward F
    Common Coaxial Connectors Edward F. Kuester, Department of Electrical and Computer Engineering, University of Colorado, September, 2000 Why different connectors? Many coaxial connector types are available in the audio, video, digital, RF and microwave industries, each designed for a specific purpose and application. Much of the development of the smaller connectors that perform well into the GHz and millimeter wave range has been conducted by test equipment measurement companies. One of their considerations is the number of connect-disconnect cycles that a connector pair can withstand while still performing as expected. Why different sizes and frequencies? The frequency range of any connector is limited by the excitation of the first circular waveguide propagation mode in the coaxial structure. Decreasing the diameter of the outer conductor increases the highest usable frequency. Filling the airspace with dielectric lowers the highest frequency and increases losses. The mating process typically changes the geometry of the mating surfaces and resistance loss at those interfaces as well as geometric changes result in variation of impedance and loss. Some RF connectors are sexless (such as the HP/Amphenol APC-7 and the General Radio GR874 and GR900BT). Most connectors have female structures with slotted fingers that introduce a small inductance. The fingers accommodate tolerance variations, but reduce repeatability and may ultimately break after 1000 connections. There are slotless versions of connectors available, but they are, for the most part, relegated to instrument interfaces. Slotless female connectors are very difficult to clean and require very careful connection and disconnection. Sex and Connectors Those unaccustomed to the use of the terms "male" and "female" to describe connectors will have to get used to this time-honored engineering nomenclature.
    [Show full text]