SCI-FAB by Kloppenberg & Co

SCISCI--FABFAB by Kloppenberg & Co

Quality Stainless Steel Products Since 1941

Custom ordered to your specification, just give us a call!

Stainless Steel Lab Furnishings •Life & Animal Sciences •Health Care & OR •Pharmaceutical •Spectroscopy •Necropsy •Pathology

REVISION: B 3/8/13

MODULAR STAINLESS CABINETRY

TABLE OF CONTENTS

Modular Stainless Cabinetry Section 1

Product Specification Guide 1 Technical Product Data 2

Standard Cabinet Details 8 Standard Cabinet Configurations 11

Casework Accessories 35

Stainless Steel Countertops Section 2

Technical Product Data 1

Options Detail 3

Countertops 4

Scullery Sinks 9

Stainless Steel Lab Furnishings Section 3

Technical Product Data 1 High Density Storage 3

Tables 4 Case Cart 7

Shelving 8 Canopy Hood 11

Modular Wall 12

Trim Pieces 13

SCISCI--FABFAB by Kloppenberg & Co 1-800-346-3246 www.kloppenberg.com

MODULAR STAINLESS CABINETRY SECTION 1

Common Features  Adjustable shelf  Removable back  Solid hinged door (units with doors)  Lock options available

Made To Order Cabinetry

1-800-346-3246 www.kloppenberg.com Section 1

MODULAR STAINLESS CABINETRY

TABLE OF CONTENTS

Product Specification Guide/Drawer Dimension Table 1

Technical Product Data

Part 1 - General 2

Part 2 - Products 3

Part 3 - Execution 5

Metric Conversion Tables 7

Standard Cabinet Construction Details

Base Cabinet 8

Wall Cabinet 9

Tall Storage Cabinets 10

Standard Cabinet Configurations

Base Cabinet 11

Wall Cabinet 23

Tall Storage Cabinets 30

Casework Accessories

Base Cabinet Scribes & Fillers 35

Base Cabinet Knee Space Components 38

Wall Cabinet Scribes & Fillers 40 Tall Storage Cabinet Scribes & Fillers 41

Sloped Tops for Wall and Tall Storage Cabinets 44

SCISCI--FABFAB by Kloppenberg & Co 1-800-346-3246 www.kloppenberg.com

MODULAR STAINLESS CABINETRY

PRODUCT SPECIFICATION GUIDE PRODUCT NUMBER CODE Example: BA362235

Cabinet Type ———————————————————————————————— B B = Base Units W = Wall Units T = Tall Units

Cabinet Configuration ———————————————————————————— A

Cabinet Width ——————————————————————————————— 36 (nominal)

Cabinet Depth ——————————————————————————————— 22 (nominal)

Cabinet Height ——————————————————————————————— 35 (nominal)

Door Swing ————————————————————————————————— L L = Left Hand R = Right Hand

Lock ———————————————————————————————————— LK (add only when required)

DRAWER DIMENSION TABLE

Sitting Height Cabinets Standing Height Cabinets 1/8 high drawer *2 3/4” *3 1/2” deep

1/4 high drawer *5 1/2” *7” deep

1/2 high/file drawer *11” deep *14” deep

*Nominal drawer face height—deduct 1.125” for interior drawer pan debth

Section 1 Page 1 SCISCI--FABFAB by Kloppenberg & Co 1-800-346-3246 www.kloppenberg.com

MODULAR STAINLESS CABINETRY

TECHNICAL PRODUCT DATA Part 1 – General

1.1 SCOPE OF WORK Includes all factory fabricated stainless steel casework as required by the project drawings.

1.2 TYPICAL INCLUSIONS A. Base and wall units. B. Tall storage units. C. Recessed units. D. Pass through units. E. Knee space rails. F. Miscellaneous fillers and scribes.

1.3 TYPICAL EXCLUSIONS A. Vinyl or rubber base. B. Wall framing and in-wall backing for anchorage support. C. Electrical. D. Mechanical. E. Work not directly associated with the stainless steel casework.

1.4 MATERIALS A. Cabinetry fabricated from T304 stainless steel sheet, (T316 stainless steel available at additional cost) conforming to ASTM A240. All exposed surfaces polished to a No. 4 brushed satin finish. (150/180 grit.) B. Glass for glazed hinged and sliding doors shall be ¼” thick clear tempered glass.

1.5 PERFORMANCE REQUIREMENTS Casework and components shall withstand the following minimum loads without damage to components or casework operations: A. Base cabinets shall support a minimum of 500 lbs. per lineal foot suspended across cabinet ends. B. Drawers in a cabinet shall support a minimum of 100 lbs. C. Utility tables (with 4 legs) shall support a minimum of 300 lbs. D. Hanging wall cases shall support a minimum of 300 lbs. E. Shelves of base units, wall cases, and tall cases shall support a minimum of 100 lbs.

1.6 SHOP DRAWINGS A. Submit complete shop drawings showing all casework, elevations, plans, cross sections and installation details. B. When locks are specified a complete keying schedule will be submitted with proposed keying for review by Architect and Owner.

SCISCI--FABFAB by Kloppenberg & Co Section 1 Page 2 1-800-346-3246 www.kloppenberg.com

MODULAR STAINLESS CABINETRY

TECHNICAL PRODUCT DATA

1.7 SAMPLES Please inquire about samples for review and acceptance. The sample, if approved, may be incorporated into the project.

1.8 DELIVERY, STORGE AND HANDLING A. Please schedule delivery of casework and equipment when spaces are sufficiently complete to allow for installation immediately following delivery. B. Protect finished surfaces from soiling or damage during handling and installation. Cover working surfaces with cardboard. Mark in large lettering “NO STANDING.”

Part 2 – Products

2.1 DESIGN REQUIREMENTS A. Modular cabinetry shall be of modern slim line styling with 1” wide vertical stiles and horizontal intermediate rails. B. Individual cabinets are to be rigid and self-supporting, modular in nature, for use interchangeably in a group of cabinets, or as a single unit. C. Top quality cabinetry to be ensured by the use of the proper machinery, tools, dies, and skilled workmanship in accordance with currently established standards of the laboratory furnishings industry. All cabinets and components are to be assembled utilizing jigs and fixtures as necessary to guarantee interchangeability of components between cabinets of like size.

2.2 CONSTRUCTION A. CABINET: 1. Cabinet backs, end panels, uprights, and toe base fabrication from 18 gauge stainless steel. 2. Top and intermediate horizontal rails and rear triangular gussets fabricated from 18 gauge stainless steel. 3. “L” shaped front corner reinforcement gussets and hinge reinforcements fabricated from 14 gauge stainless steel. 4. Bottom triangular leveler gussets fabricated from 11 gauge stainless steel. 5. All cabinets shall have a cleanable smooth interior. Front and rear reinforcing members, and channel shaped uprights shall be enclosed full height. 6. Front face joints fully welded, ground and polished to provide a continuous flat front plane free of crevices. 7. Front face of doors, drawers, and panels shall align flush with cabinet front, and shall not overlap case ends or top and bottom rails. 8. Cabinet openings for doors and drawers rabbetted to provide a dust resistant interior. 9. Base cabinets furnished with removable back panel for access to stops, valves, and service lines. No back panel furnished on cabinets with drawers only. Sink base cabinets furnished with lowered back panels (2/3 height) to accommodate sink, drain and service fixtures.

Page 3 Section 1 SCISCI--FABFAB by Kloppenberg & Co 1-800-346-3246 www.kloppenberg.com MODULAR STAINLESS CABINETRY

TECHNICAL PRODUCT DATA

10. Wall and tall storage cabinets furnished with fixed back panel. 11. Base cabinets, wall cabinets, and tall cabinets up to 48” in width double-hinged doors, furnished without vertical center post to allow full access to cabinet interior. 12. Concealed horizontal rails furnished beneath all drawers, with or without locks. 13. Vertical stiles shall be provided between all doors and drawers, or multiple tiers of drawers of all sectional cabinets. 14. All floor-mounted cabinets supported on four (4) adjustable leveling glides. 15. Bottom shelf of base cabinets recessed, with sides turned up to contain spills within cabinet. 16. Bottom of base cabinets shall be removable for cleanability and access to leveling glides. Open or plugged holes in bottom of cabinets for access to leveling glides are not acceptable. 17. Top of toe space below bottom cabinet closed and finished flush. 18. Front corners of cabinets are reinforced with “L” shaped gussets. 19. Front top rails on cabinets over 30” in width reinforced with additional stainless steel angle shape for greater strength and rigidity.

B. DOORS: 1. All doors shall close against rubber bumpers. 2. All hinged doors less than 36” in height shall be hung by a minimum of two (2) hinges. Doors greater than 36” in height shall be hung with a minimum of three (3) hinges. 3. Hinged and Sliding Solid Panel Doors: a. 3/4” thick, double wall telescoping box construction, with sound deadened interior. b. Exterior pan fabricated from 18 gauge stainless steel. c. Interior pan fabricated from 20 gauge stainless steel. d. Hinges attached with stainless steel screws to 14 gauge steel reinforcing plates in case and door. 4. Hinged and Sliding Framed Glass Doors: a. 18 gauge stainless steel outer face to be of one piece construction, with corners fully welded, ground and polished. b. 20 gauge stainless steel inner face removable for replacement of glazing. c. Glazing set into full perimeter, continuous vinyl glazing channel.

C. DRAWERS: 1. Drawer fronts 3/4” thick, 20 gauge stainless steel telescoping box construction, sound deadening interior. 2. Bottoms and sides of drawer formed from single sheet of 20 gauge stainless steel, coved at bottom. Body spot welded to drawer front. 3. Drawer shall close against rubber bumpers. 4. Drawer suspension – Typical, 100 lb. capacity, zinc-plated heavy duty full-extension telescoping slides with polymer ball bearings. Full width drawers over 36” wide will have 200lb drawer glides. 5. All drawers over 24” in width furnished with two (2) drawer pulls.

SCISCI--FABFAB by Kloppenberg & Co Section 1 Page 4 1-800-346-3246 www.kloppenberg.com MODULAR STAINLESS CABINETRY

TECHNICAL PRODUCT DATA

D. SHELVES: 1. Adjustable intermediate shelves fabricated from 20 gauge stainless steel, with front and rear edges formed down and back ¾”. Ends formed down ¾” for stiffness. 2. Shelves over 36” long reinforced with stainless steel hat channel stiffener running longitudi- nally along center of shelf.

E. KNEE SPACE RAILS AND DRAWER ASSEMBLIES: 1. Knee Space Rails: 4” high “C” shaped channel formed from 18 gauge stainless steel. 2. Drawers to be same as standard drawer unit previously specified, mounted in 4-1/2” high, 18 gauge stainless steel four (4) sided frame. 3. Knee space rails and drawer assemblies designed for mechanical attachment to adjacent cabinets without exposed fasteners.

F. CLOSURE PANELS, SCRIBES AND FILLERS: 1. Closure panels, scribes and fillers formed from 18 gauge stainless steel sheet, secured to cabinetry without exposed fasteners.

G. HARDWARE 1. Door Hinges – 2-1/2” long stainless steel five (5) knuckle institutional type butt hinges with rounded ends. 2. Door Catches – Zink plated adjustable nylon roller catch. 3. Hinged Door and Drawer Pulls – Satin chrome plated wire pull, attached with screws on minimum 4” centers. 4. Drawer pulls shall be mounted horizontally and door pulls mounted vertically. 5. Solid and framed glass sliding doors are furnished with stainless steel pulls. 6. Solid and framed glass sliding doors are suspended by nylon-tired sheaves with steel bearings on extruded aluminum overhead track. Bottom of doors held in alignment by removable stainless steel shoe. 7. Shelf Clips: Die formed stainless steel. 8. Leveling Glides: 3/8” – 16 mild steel 250lb capacity glide with minimum 1” adjustment. 9. Label Holders: (where shown on drawings, or as scheduled) 1” x 2-1/2” satin chrome plated finish, installed with screws. 10. Locks: (where shown on drawings, or as scheduled) heavy-duty cylinder type 5-disc tumbler dull nickel plated, stamped with identifying number.

PART 3 – EXECUTION 3.1 INSTALLATION A. Casework Installation: 1. Set casework components plumb, square and straight with no distortion and securely an- chored. 2. Screw continuous cabinets together with joints flush, tight and uniform, and with alignment of adjacent units within 1/16” tolerance. 3. Secure wall cabinets to solid backing material, not to plaster, lath or gypsum board.

Page 5 Section 1 SCISCI--FABFAB by Kloppenberg & Co 1-800-346-3246 www.kloppenberg.com MODULAR STAINLESS CABINETRY

TECHNICAL PRODUCT DATA

3.2 ADJUSTING A. Repair or move and replace defective work, as directed by Owner’s Representative upon com- pletion of installation B. Adjust Doors, drawers, hardware and other moving or operating parts to function smoothly.

3.3 CLEANING A. Clean shop finished casework, touch up as required, wipe down and broom clean interior and exterior of equipment.

3.4 PROTECTION OF FINISHED WORK A. Provide all necessary protective measures to prevent exposure of casework and equipment from other construction activity during installation. B. Advise contractor of procedures and precautions for protection of installed casework from damage by workers from other trades.

SCISCI--FABFAB by Kloppenberg & Co Section 1 Page 6 1-800-346-3246 www.kloppenberg.com MODULAR STAINLESS CABINETRY

METRIC CONVERSION TABLES

FOR PURPOSES OF THIS CATALOG, THE FOLOWING ARE NOMINAL ENGLISH TO METRIC CONVERSIONS:

Dimensions: Weights: 2 3/4” 70 mm 100 lbs 45.4 kg 3 1/2” 89 mm 150 lbs 68.0 kg 5 1/2” 140 mm 300 lbs 136.1 kg 7” 178 mm 500 lbs 226.8 kg 11” 279 mm 14” 356 mm 16” 406 mm 18” 457 mm 22” 559 mm Gauge Chart 24” 610 mm 28 3/4” 730 mm Gauge MM Inch 30” 762 mm 11 3.17 .120 34 3/4” 883 mm 14 1.98 .075 36” 914 mm 16 1.59 .060 42” 1067 mm 18 1.27 .049 48” 1219 mm 20 .953 .036 84” 2134 mm 22 .794 .030

Page 7 Section 1 SCISCI--FABFAB by Kloppenberg & Co 1-800-346-3246 www.kloppenberg.com

MODULAR STAINLESS CABINETRY BASE UNIT

Typical Base Cabinet Construction

#18 GA S/S #18 GA S/S Front Rail End Panel

#16 GA S/S Back Rail

FRONT/TOP EDGE #20 GA S/S Remov. Back Panel #18 GA S/S Door Front Full Extension Drawer Slides BACK/TOP Adj. Nylon EDGE Roller Catch

#20 GA S/S #18 GA S/S Door Back Drawer Pan

#18 GA S/S Intermediate Rail

Stainless Steel Plated Wire Pull 2 1/2” Long S/S 5 #18 GA S/S Body Knuckle Institutional #18 GA S/S Type Butt Hinges Drawer Front

#18 GA S/S Mullion #18 GA S/S End Panel #20 GA S/S Recessed Removable Bottom Shelf #20 GA S/S Remov. Panel

#20GA S/S Recessed Removable Bottom Shelf #18 GA S/S Base

#16 GA S/S

FRONT/BOTTOM EDGE BACK/BOTTOM EDGE

SCISCI--FABFAB by Kloppenberg & Co Section 1 Page 8 1-800-346-3246 www.kloppenberg.com

MODULAR STAINLESS CABINETRY WALL UNIT

Typical Wall Cabinet Construction

#18 GA S/S Top

FRONT/TOP EDGE

#18 GA S/S Adj. Nylon Back Panel Roller Catch BACK/TOP EDGE

#18 GA S/S Body

#20 GA S/S Adjustable Shelves

#18 GA S/S Exterior #20 GA S/S Interior Door Frames

2 1/2” Long S/S 5 Knuckle Institutional Type Butt Hinges

#18 GA S/S Back Panel Stainless Steel Plated Wire Pull

#18 GA S/S Bottom 1/4” Tempered Glass

#18 GA S/S Bottom

FRONT/BOTTOM EDGE BACK/BOTTOM EDGE

Page 9 Section 1 SCISCI--FABFAB by Kloppenberg & Co 1-800-346-3246 www.kloppenberg.com MODULAR STAINLESS CABINETRY TALL UNIT

Typical Tall Cabinet Construction

#18 GA S/S Top

#18 GA S/S FRONT/TOP Back Panel EDGE BACK/TOP EDGE

#18 GA S/S Body #20 GA S/S Adjustable Shelves

#18 GA S/S Exterior #20 GA S/S Interior Door Frames

2 1/2” Long S/S 5 Knuckle Institutional Type Butt Hinges

#18 GA S/S #20 GA S/S Recessed Back Panel Removable Bottom Shelf

Stainless Steel Plated Wire Pull

1/4” Tempered Glass

#18 GA S/S Base

BACK/BOTTOM FRONT/BOTTOM EDGE EDGE

SCISCI--FABFAB by Kloppenberg & Co Section 1 Page 10 1-800-346-3246 www.kloppenberg.com

MODULAR STAINLESS CABINETRY BASE UNIT

Common Features  ADA height available  Adjustable shelf  Removable back/bottom  Solid hinged door (units with doors)  Lock options available Overall Dimensions Product Open Base Unit W D H Number BA182229 18” 22” 28 3/4” BA182235 18” 22” 34 3/4” BA242229 24” 22” 28 3/4” BA242235 24” 22” 34 3/4” BA302229 30” 22” 28 3/4” BA302235 30” 22” 34 3/4” BA362229 36” 22” 28 3/4” BA362235 36” 22” 34 3/4” BA422229 42” 22” 28 3/4” BA422235 42” 22” 34 3/4” BA482229 48” 22” 28 3/4” BA482235 48” 22” 34 3/4”

Hinged Single Door Base Unit

Overall Dimensions Product W D H Number BB182229 18” 22” 28 3/4” BB182235 18” 22” 34 3/4” BB242229 24” 22” 28 3/4” BB242235 24” 22” 34 3/4”

 Add ‘L’ or ‘R’ to end of product number for door swing

Page 11 Section 1 SCISCI--FABFAB by Kloppenberg & Co 1-800-346-3246 www.kloppenberg.com MODULAR STAINLESS CABINETRY BASE UNIT

Common Features  ADA height available  Adjustable shelf  Removable back/bottom  Solid hinged door (units with doors)  Lock options available

Overall Hinged Double Door Base Unit Dimensions Product W D H Number BC302229 30” 22” 28 3/4” BC302235 30” 22” 34 3/4” BC362229 36” 22” 28 3/4” BC362235 36” 22” 34 3/4” BC422229 42” 22” 28 3/4” BC422235 42” 22” 34 3/4” BC482229 48” 22” 28 3/4” BC482235 48” 22” 34 3/4”

Overall Sliding Door Base Unit Dimensions Product W D H Number BD302229 30” 22” 28 3/4” BD302235 30” 22” 34 3/4” BD362229 36” 22” 28 3/4” BD362235 36” 22” 34 3/4” BD422229 42” 22” 28 3/4” BD422235 42” 22” 34 3/4” BD482229 48” 22” 28 3/4” BD482235 48” 22” 34 3/4”

SCISCI--FABFAB by Kloppenberg & Co Section 1 Page 1-800-346-3246 www.kloppenberg.com MODULAR STAINLESS CABINETRY BASE UNIT

Hinged Single Door/Single Drawer Base Unit

Overall Drawer Dimensions Dimensions

Catalog W D H No. D H Number BE182229 18” 22” 28 3/4” 1 5 1/2” 1/4 BE182235 18” 22” 34 3/4” 1 7” 1/4 BE242229 24” 22” 28 3/4” 1 5 1/2” 1/4 BE242235 24” 22” 34 3/4” 1 7” 1/4

 Add ‘L’ or ‘R’ to end of product number for door swing

Hinged Single Door/Double Drawer Base Unit

Overall Drawer Dimensions Dimensions Catalog W D H No. D H Number BF182229 18” 22” 28 3/4” 2 2 3/4” 1/8 BF182235 18” 22” 34 3/4” 2 3 1/2” 1/8 BF242229 24” 22” 28 3/4” 2 2 3/4” 1/8 BF242235 24” 22” 34 3/4” 2 3 1/2” 1/8

 Add ‘L’ or ‘R’ to end of product number for door swing

Page 13 Section 1 SCISCI--FABFAB by Kloppenberg & Co 1-800-346-3246 www.kloppenberg.com MODULAR STAINLESS CABINETRY BASE UNIT

Overall Drawer Hinged Double Door/Single Drawer Base Unit Dimensions Dimensions Catalog W D H No. D H Number BG302229 30” 22” 28 3/4” 2 5 1/2” 1/4 BG302235 30” 22” 34 3/4” 2 7” 1/4 BG362229 36” 22” 28 3/4” 2 5 1/2” 1/4 BG362235 36” 22” 34 3/4” 2 7” 1/4 BG422229 42” 22” 28 3/4” 2 5 1/2” 1/4 BG422235 42” 22” 34 3/4” 2 7” 1/4 BG482229 48” 22” 28 3/4” 2 5 1/2” 1/4 BG482235 48” 22” 34 3/4” 2 7” 1/4

Overall Drawer Hinged Double Door/Double Drawer Base Unit Dimensions Dimensions Catalog W D H No. D H Number BH302229 30” 22” 28 3/4” 4 2 3/4” 1/8 BH302235 30” 22” 34 3/4” 4 3 1/2” 1/8 BH362229 36” 22” 28 3/4” 4 2 3/4” 1/8 BH362235 36” 22” 34 3/4” 4 3 1/2” 1/8 BH422229 42” 22” 28 3/4” 4 2 3/4” 1/8 BH422235 42” 22” 34 3/4” 4 3 1/2” 1/8 BH482229 48” 22” 28 3/4” 4 2 3/4” 1/8 BH482235 48” 22” 34 3/4” 4 3 1/2” 1/8

SCISCI--FABFAB by Kloppenberg & Co Section 1 Page 14 1-800-346-3246 www.kloppenberg.com MODULAR STAINLESS CABINETRY BASE UNIT

Overall Drawer Hinged Double Door/Single Drawer Base Unit Dimensions Dimensions Catalog W D H No. D H Number BJ302229 30” 22” 28 3/4” 1 5 1/2” 1/4 BJ302235 30” 22” 34 3/4” 1 7” 1/4 BJ362229 36” 22” 28 3/4” 1 5 1/2” 1/4 BJ362235 36” 22” 34 3/4” 1 7” 1/4 BJ422229 42” 22” 28 3/4” 1 5 1/2” 1/4 BJ422235 42” 22” 34 3/4” 1 7” 1/4 BJ482229 48” 22” 28 3/4” 1 5 1/2” 1/4 BJ482235 48” 22” 34 3/4” 1 7” 1/4

Overall Drawer Dimensions Dimensions Catalog W D H No. D H Number Drawer Base Unit BK182229 18” 22” 28 3/4” 4 5 1/2” 1/4 BK182235 18” 22” 34 3/4” 4 7” 1/4 BK242229 24” 22” 28 3/4” 4 5 1/2” 1/4 BK242235 24” 22” 34 3/4” 4 7” 1/4 BK302229 30” 22” 28 3/4” 4 5 1/2” 1/4 BK302235 30” 22” 34 3/4” 4 7” 1/4 BK362229 36” 22” 28 3/4” 4 5 1/2” 1/4 BK362235 36” 22” 34 3/4” 4 7” 1/4 BK422229 42” 22” 28 3/4” 4 5 1/2” 1/4 BK422235 42” 22” 34 3/4” 4 7” 1/4 BK482229 48” 22” 28 3/4” 4 5 1/2” 1/4 BK482235 48” 22” 34 3/4” 4 7” 1/4

Page 15 Section 1 SCISCI--FABFAB by Kloppenberg & Co 1-800-346-3246 www.kloppenberg.com MODULAR STAINLESS CABINETRY BASE UNIT

Common Features  ADA height available  Adjustable shelf  Removable back/bottom  Solid hinged door (units with doors)  Lock options available Overall Drawer  For actual drawer heights please see drawer Dimensions Dimensions dimension table Catalog W D H No. D H Number Drawer Base Unit BL182229 18” 22” 28 3/4” 5 * * BL182235 18” 22” 34 3/4” 5 * * BL242229 24” 22” 28 3/4” 5 * * BL242235 24” 22” 34 3/4” 5 * * BL302229 30” 22” 28 3/4” 5 * * BL302235 30” 22” 34 3/4” 5 * * BL362229 36” 22” 28 3/4” 5 * * BL362235 36” 22” 34 3/4” 5 * * BL422229 42” 22” 28 3/4” 5 * * BL422235 42” 22” 34 3/4” 5 * * BL482229 48” 22” 28 3/4” 5 * *  For Units 28 3/4” High: 2 Drawers - (D) 2 3/4”, (H) 1/8. 4 Drawers - (D) 5 1/2”, (H) 1/4. BL482235 48” 22” 34 3/4” 5 * *  For Units 34 3/4” High: 2 Drawers - (D) 3 1/2”, (H) 1/8. 4 Drawers - (D) 7”, (H) 1/4.

Overall Drawer Drawer/Door Base Unit Dimensions Dimensions Catalog W D H No. D H Number BM302229 30” 22” 28 3/4” 4 5 1/2” 1/4 BM302235 30” 22” 34 3/4” 4 7” 1/4 BM362229 36” 22” 28 3/4” 4 5 1/2” 1/4 BM362235 36” 22” 34 3/4” 4 7” 1/4 BM422229 42” 22” 28 3/4” 4 5 1/2” 1/4 BM422235 42” 22” 34 3/4” 4 7” 1/4 BM482229 48” 22” 28 3/4” 4 5 1/2” 1/4 BM482235 48” 22” 34 3/4” 4 7” 1/4

 Add ‘L’ or ‘R’ to end of product number for door swing

SCISCI--FABFAB by Kloppenberg & Co Section 1 Page 16 1-800-346-3246 www.kloppenberg.com MODULAR STAINLESS CABINETRY BASE UNIT

Common Features  ADA height available  Adjustable shelf  Removable back/bottom  Solid hinged door (units with doors)  Lock options available  For actual drawer heights please see drawer dimension table Overall Drawer Dimensions Dimensions Drawer Base Unit Catalog W D H No. D H Number BN302229 30” 22” 28 3/4” 5 5 1/2” 1/4 BN302235 30” 22” 34 3/4” 5 7” 1/4 BN362229 36” 22” 28 3/4” 5 5 1/2” 1/4 BN362235 36” 22” 34 3/4” 5 7” 1/4 BN422229 42” 22” 28 3/4” 5 5 1/2” 1/4 BN422235 42” 22” 34 3/4” 5 7” 1/4 BN482229 48” 22” 28 3/4” 5 5 1/2” 1/4 BN482235 48” 22” 34 3/4” 5 7” 1/4

 Add ‘L’ or ‘R’ to end of product number for door swing

Drawer/Door Base Unit

Overall Drawer Dimensions Dimensions Catalog W D H No. D H Number BP302229 30” 22” 28 3/4” 7 * * BP302235 30” 22” 34 3/4” 7 * * BP362229 36” 22” 28 3/4” 7 * * BP362235 36” 22” 34 3/4” 7 * * BP422229 42” 22” 28 3/4” 7 * * BP422235 42” 22” 34 3/4” 7 * * BP482229 48” 22” 28 3/4” 7 * * BP482235 48” 22” 34 3/4” 7 * *  For Units 28 3/4” High: 4 Drawers - (D) 2 3/4”,  Add ‘L’ or ‘R’ to end of product number for door swing (H) 1/8. 3 Drawers - (D) 5 1/2”, (H) 1/4  For Units 34 3/4” High: 4 Drawers - (D) 3 1/2”, (H) 1/8. 3 Drawers - (D) 7”, (H) 1/4.

Page 17 Section 1 SCISCI--FABFAB by Kloppenberg & Co 1-800-346-3246 www.kloppenberg.com MODULAR STAINLESS CABINETRY BASE UNIT

Overall Drawer Combo Drawer Base Unit Dimensions Dimensions Catalog W D H No. D H Number BQ302229 30” 22” 28 3/4” 5 5 1/2” 1/4 BQ302235 30” 22” 34 3/4” 5 7” 1/4 BQ362229 36” 22” 28 3/4” 5 5 1/2” 1/4 BQ362235 36” 22” 34 3/4” 5 7” 1/4 BQ422229 42” 22” 28 3/4” 5 5 1/2” 1/4 BQ422235 42” 22” 34 3/4” 5 7” 1/4 BQ482229 48” 22” 28 3/4” 5 5 1/2” 1/4 BQ482235 48” 22” 34 3/4” 5 7” 1/4

Overall Drawer Combo Drawer Base Unit Dimensions Dimensions Catalog W D H No. D H Number BR302229 30” 22” 28 3/4” 6 5 1/2” 1/4 BR302235 30” 22” 34 3/4” 6 7” 1/4 BR362229 36” 22” 28 3/4” 6 5 1/2” 1/4 BR362235 36” 22” 34 3/4” 6 7” 1/4 BR422229 42” 22” 28 3/4” 6 5 1/2” 1/4 BR422235 42” 22” 34 3/4” 6 7” 1/4 BR482229 48” 22” 28 3/4” 6 5 1/2” 1/4 BR482235 48” 22” 34 3/4” 6 7” 1/4

SCISCI--FABFAB by Kloppenberg & Co Section 1 Page 18 1-800-346-3246 www.kloppenberg.com MODULAR STAINLESS CABINETRY BASE UNIT

Common Features  ADA height available  Adjustable shelf  Removable back/bottom  Lock options available  For actual drawer heights please see drawer dimension table

Overall Drawer Combo Drawer Base Unit Dimensions Dimensions Catalog W D H No. D H Number BS302229 30” 22” 28 3/4” 7 5 1/2” 1/4 BS302235 30” 22” 34 3/4” 7 7” 1/4 BS362229 36” 22” 28 3/4” 7 5 1/2” 1/4 BS362235 36” 22” 34 3/4” 7 7” 1/4 BS422229 42” 22” 28 3/4” 7 5 1/2” 1/4 BS422235 42” 22” 34 3/4” 7 7” 1/4 BS482229 48” 22” 28 3/4” 7 5 1/2” 1/4 BS482235 48” 22” 34 3/4” 7 7” 1/4

Overall Drawer Combo Drawer Base Unit Dimensions Dimensions Catalog W D H No. D H Number BT302229 30” 22” 28 3/4” 8 5 1/2” 1/4 BT302235 30” 22” 34 3/4” 8 7” 1/4 BT362229 36” 22” 28 3/4” 8 5 1/2” 1/4 BT362235 36” 22” 34 3/4” 8 7” 1/4 BT422229 42” 22” 28 3/4” 8 5 1/2” 1/4 BT422235 42” 22” 34 3/4” 8 7” 1/4 BT482229 48” 22” 28 3/4” 8 5 1/2” 1/4 BT482235 48” 22” 34 3/4” 8 7” 1/4

Page 19 Section 1 SCISCI--FABFAB by Kloppenberg & Co 1-800-346-3246 www.kloppenberg.com MODULAR STAINLESS CABINETRY BASE UNIT

Overall Drawer Combo Drawer Base Unit Dimensions Dimensions Catalog W D H No. D H Number BU302229 30” 22” 28 3/4” 10 * * BU302235 30” 22” 34 3/4” 10 * * BU362229 36” 22” 28 3/4” 10 * * BU362235 36” 22” 34 3/4” 10 * * BU422229 42” 22” 28 3/4” 10 * * BU422235 42” 22” 34 3/4” 10 * * BU482229 48” 22” 28 3/4” 10 * * BU482235 48” 22” 34 3/4” 10 * *  For Units 28 3/4” High: 2 Drawers - (D) 2 3/4”, (H) 1/8. 4 Drawers - (D) 5 1/2”, (H) 1/4.  For Units 34 3/4” High: 2 Drawers - (D) 3 1/2”, (H) 1/8. 4 Drawers - (D) 7”, (H) 1/4.

Corner Base Unit

Overall Dimensions Catalog W D H Number BV342229 34” 22” 28 3/4” Top View BV342235 34” 22” 34 3/4”

 Add ‘L’ or ‘R’ to end of product number for door swing

SCISCI--FABFAB by Kloppenberg & Co Section 1 Page 20 1-800-346-3246 www.kloppenberg.com MODULAR STAINLESS CABINETRY BASE UNIT

Common Features  ADA height available  Adjustable shelf  Removable back/bottom  Solid hinged door (units with doors)  Lock options available

Sink Single Door Base Unit

Overall Dimensions Product W D H Number BW182229 18” 22” 28 3/4” BW182235 48” 22” 34 3/4” BW242229 24” 22” 28 3/4” BW242235 24” 22” 34 3/4”

 Add ‘L’ or ‘R’ to end of product number for door swing  Back cut-out for large sinks

Overall Dimensions Sink Double Door Base Unit Product W D H Number BX302229 30” 22” 28 3/4” BX302235 30” 22” 34 3/4” BX362229 36” 22” 28 3/4” BX362235 36” 22” 34 3/4” BX422229 42” 22” 28 3/4” BX422235 42” 22” 34 3/4” BX482229 48” 22” 28 3/4” BX482235 48” 22” 34 3/4”

 Back cut-out for large sinks

Page 21 Section 1 SCISCI--FABFAB by Kloppenberg & Co 1-800-346-3246 www.kloppenberg.com MODULAR STAINLESS CABINETRY BASE UNIT

Common Features  ADA height available  Adjustable shelf  Removable back/bottom  Solid hinged door (units with doors)  Lock options available

Sink Base Unit

Overall Dimensions Product W D H Number BY522229 52” 22” 28 3/4” BY522235 52” 22” 34 3/4” BY582229 58” 22” 28 3/4” BY582235 58” 22” 34 3/4”

 Flush front panel above  Back cut-out for large sinks

Sink Double Door Base Unit

Overall Dimensions Product W D H Number BZ602229 60” 22” 28 3/4” BZ602235 60” 22” 34 3/4”

 Flush front panel above  Back cut-out for large sinks

SCISCI--FABFAB by Kloppenberg & Co Section 1 Page 22 1-800-346-3246 www.kloppenberg.com MODULAR STAINLESS CABINETRY BASE UNIT

Acid Double Door Base Unit

Common Features  Spill containment trays  “ACID” cabinet labeling  ADA height available  Adjustable shelf  Louvered doors

Overall Dimensions Product W D H Number BAC242235 24” 22” 34 3/4”

 Flush front panel above

Acid Single Door Base Unit

Overall Dimensions Product W D H Number BAC362235 36” 22” 34 3/4” BAC422235 42” 22” 34 3/4” BAC482235 48” 22” 34 3/4”

 Flush front panel above

Page 23 Section 1 SCISCI--FABFAB by Kloppenberg & Co 1-800-346-3246 www.kloppenberg.com MODULAR STAINLESS CABINETRY WALL UNIT

Common Features  Solid back  Lock options available  Adjustable shelf on 1/2” increments, see below: Open Corner Wall Unit 24” high cabinet = one shelf 30” high cabinet = two shelves 36” high cabinet = two shelves

Overall Dimensions Product W D H Number WH181324 18” 13” 24” WH181624 18 16” 24” WH181330 18” 13” 30” WH181630 18 16” 30” WH181336 18” 13” 36” WH181636 18 16” 36” WH181348 18” 13” 48” WH181648 18 16” 48”

Framed Glass Corner Wall Unit

Overall Dimensions Product W D H Number WI181324 18” 13” 24” WI181624 18 16” 24” WI181330 18” 13” 30” WI181630 18 16” 30” WI181336 18” 13” 36” WI181636 18 16” 36” WI181348 18” 13” 48” WI181648 18 16” 48”

SCISCI--FABFAB by Kloppenberg & Co Section 1 Page 24 1-800-346-3246 www .k loppenberg.com MODULAR STAINLESS CABINETRY WALL UNIT

Open Front Wall Unit

Common Features  Solid back  Adjustable shelf on 1/2” increments, see below: 24” high cabinet = one shelf 30” high cabinet = two shelves 36” high cabinet = two shelves 48” high cabinet = three shelves

Overall Overall Overall Overall Dimensions Dimensions Dimensions Dimensions Product Product Product Product W D H W D H W D H W D H Number Number Number Number WA181324 18” 13” 24” WA181330 18” 13” 30” WA181336 18” 13” 36” WA181348 18” 13” 48” WA181624 18” 16” 24” WA181630 18” 16” 30” WA181636 18” 16” 36” WA181648 18” 16” 48” WA241324 24” 13” 24” WA241330 24” 13” 30” WA241336 24” 13” 36” WA241348 24” 13” 48” WA241624 24” 16” 24” WA241630 24” 16” 30” WA241636 24” 16” 36” WA241648 24” 16” 48” WA301324 30” 13” 24” WA301330 30” 13” 30” WA301336 30” 13” 36” WA301348 30” 13” 48” WA301624 30” 16” 24” WA301630 30” 16” 30” WA301636 30” 16” 36” WA301648 30” 16” 48” WA361324 36” 13” 24” WA361330 36” 13” 30” WA361336 36” 13” 36” WA361348 36” 13” 48” WA361624 36” 16” 24” WA361630 36” 16” 30” WA361636 36” 16” 36” WA361648 36” 16” 48” WA421324 42” 13” 24” WA421330 42” 13” 30” WA421336 42” 13” 36” WA421348 42” 13” 48” WA421624 42” 16” 24” WA421630 42” 16” 30” WA421636 42” 16” 36” WA421648 42” 16” 48” WA481324 48” 13” 24” WA481330 48” 13” 30” WA481336 48” 13” 36” WA481348 48” 13” 48” WA481624 48” 16” 24” WA481630 48” 16” 30” WA481636 48” 16” 36” WA481648 48” 16” 48”

Page 25 Section 1 SCISCI--FABFAB by Kloppenberg & Co 1-800-346-3246 www.kloppenberg.com MODULAR STAINLESS CABINETRY WALL UNIT

Solid Hinged Door Wall Unit

Common Features  Solid back  Lock options available  Adjustable shelf on 1/2” increments, see below: 24” high cabinet = one shelf 30” high cabinet = two shelves 36” high cabinet = two shelves 48” high cabinet = three shelves  Add ‘L’ or ‘R’ to end of product number for door swing

Overall Overall Overall Overall Dimensions Dimensions Dimensions Dimensions Product Product Product Product W D H W D H W D H W D H Number Number Number Number WB181324 18” 13” 24” WB181330 18” 13” 30” WB181336 18” 13” 36” WB181348 18” 13” 48” WB181624 18” 16” 24” WB181630 18” 16” 30” WB181636 18” 16” 36” WB181648 18” 16” 48” WB241324 24” 13” 24” WB241330 24” 13” 30” WB241336 24” 13” 36” WB241348 24” 13” 48” WB241624 24” 16” 24” WB241630 24” 16” 30” WB241636 24” 16” 36” WB241648 24” 16” 48”

SCISCI--FABFAB by Kloppenberg & Co Section 1 Page 26 1-800-346-3246 www.kloppenberg.com MODULAR STAINLESS CABINETRY WALL UNIT

Double Hinged Door Wall Unit

Overall Overall Overall Overall Dimensions Dimensions Dimensions Dimensions Product Product Product Product W D H W D H W D H W D H Number Number Number Number WC301324 30” 13” 24” WC301330 30” 13” 30” WC301336 30” 13” 36” WC301348 30” 13” 48” WC301624 30” 16” 24” WC301630 30” 16” 30” WC301636 30” 16” 36” WC301648 30” 16” 48” WC361324 36” 13” 24” WC361330 36” 13” 30” WC361336 36” 13” 36” WC361348 36” 13” 48” WC361624 36” 16” 24” WC361630 36” 16” 30” WC361636 36” 16” 36” WC361648 36” 16” 48” WC421324 42” 13” 24” WC421330 42” 13” 30” WC421336 42” 13” 36” WC421348 42” 13” 48” WC421624 42” 16” 24” WC421630 42” 16” 30” WC421636 42” 16” 36” WC421648 42” 16” 48” WC481324 48” 13” 24” WC481330 48” 13” 30” WC481336 48” 13” 36” WC481348 48” 13” 48” WC481624 48” 16” 24” WC481630 48” 16” 30” WC481636 48” 16” 36” WC481648 48” 16” 48”

Page 26 Section 1 SCISCI--FABFAB by Kloppenberg & Co 1-800-346-3246 www.kloppenberg.com MODULAR STAINLESS CABINETRY WALL UNIT

Sliding Door Wall Unit

Overall Overall Overall Overall Dimensions Dimensions Dimensions Dimensions Product Product Product Product W D H W D H W D H W D H Number Number Number Number WD301324 30” 13” 24” WD301330 30” 13” 30” WD301336 30” 13” 36” WD301348 30” 13” 48” WD301624 30” 16” 24” WD301630 30” 16” 30” WD301636 30” 16” 36” WD301648 30” 16” 48” WD361324 36” 13” 24” WD361330 36” 13” 30” WD361336 36” 13” 36” WD361348 36” 13” 48” WD361624 36” 16” 24” WD361630 36” 16” 30” WD361636 36” 16” 36” WD361648 36” 16” 48” WD421324 42” 13” 24” WD421330 42” 13” 30” WD421336 42” 13” 36” WD421348 42” 13” 48” WD421624 42” 16” 24” WD421630 42” 16” 30” WD421636 42” 16” 36” WD421648 42” 16” 48” WD481324 48” 13” 24” WD481330 48” 13” 30” WD481336 48” 13” 36” WD481348 48” 13” 48” WD481624 48” 16” 24” WD481630 48” 16” 30” WD481636 48” 16” 36” WD481648 48” 16” 48”

SCISCI--FABFAB by Kloppenberg & Co Section 1 Page 27 1-800-346-3246 www.kloppenberg.com MODULAR STAINLESS CABINETRY WALL UNIT

Framed Glass Hinged Door Wall Unit

Overall Overall Overall Overall Dimensions Dimensions Dimensions Dimensions Product Product Product Product W D H W D H W D H W D H Number Number Number Number WE181324 18” 13” 24” WE181330 18” 13” 30” WE181336 18” 13” 36” WE181348 18” 13” 48” WE181624 18” 16” 24” WE181630 18” 16” 30” WE181636 18” 16” 36” WE181648 18” 16” 48” WE241324 24” 13” 24” WE241330 24” 13” 30” WE241336 24” 13” 36” WE241348 24” 13” 48” WE241624 24” 16” 24” WE241630 24” 16” 30” WE241636 24” 16” 36” WE241648 24” 16” 48”

Page 28 Section 1 SCISCI--FABFAB by Kloppenberg & Co 1-800-346-3246 www.kloppenberg.com MODULAR STAINLESS CABINETRY WALL UNIT

Framed Glass Hinged Double Door Wall Unit

Overall Overall Overall Overall Dimensions Dimensions Dimensions Dimensions Product Product Product Product W D H W D H W D H W D H Number Number Number Number WF301324 30” 13” 24” WF301330 30” 13” 30” WF301336 30” 13” 36” WF301348 30” 13” 48” WF301624 30” 16” 24” WF301630 30” 16” 30” WF301636 30” 16” 36” WF301648 30” 16” 48” WF361324 36” 13” 24” WF361330 36” 13” 30” WF361336 36” 13” 36” WF361348 36” 13” 48” WF361624 36” 16” 24” WF361630 36” 16” 30” WF361636 36” 16” 36” WF361648 36” 16” 48” WF421324 42” 13” 24” WF421330 42” 13” 30” WF421336 42” 13” 36” WF421348 42” 13” 48” WF421624 42” 16” 24” WF421630 42” 16” 30” WF421636 42” 16” 36” WF421648 42” 16” 48” WF481324 48” 13” 24” WF481330 48” 13” 30” WF481336 48” 13” 36” WF481348 48” 13” 48” WF481624 48” 16” 24” WF481630 48” 16” 30” WF481636 48” 16” 36” WF481648 48” 16” 48”

SCISCI--FABFAB by Kloppenberg & Co Section 1 Page 29 1-800-346-3246 www.kloppenberg.com MODULAR STAINLESS CABINETRY WALL UNIT

Framed Glass Sliding Door Wall Unit

Overall Overall Overall Overall Dimensions Dimensions Dimensions Dimensions Product Product Product Product W D H W D H W D H W D H Number Number Number Number WG301324 30” 13” 24” WG301330 30” 13” 30” WG301336 30” 13” 36” WG301348 30” 13” 48” WG301624 30” 16” 24” WG301630 30” 16” 30” WG301636 30” 16” 36” WG301648 30” 16” 48” WG361324 36” 13” 24” WG361330 36” 13” 30” WG361336 36” 13” 36” WG361348 36” 13” 48” WG361624 36” 16” 24” WG361630 36” 16” 30” WG361636 36” 16” 36” WG361648 36” 16” 48” WG421324 42” 13” 24” WG421330 42” 13” 30” WG421336 42” 13” 36” WG421348 42” 13” 48” WG421624 42” 16” 24” WG421630 42” 16” 30” WG421636 42” 16” 36” WG421648 42” 16” 48” WG481324 48” 13” 24” WG481330 48” 13” 30” WG481336 48” 13” 36” WG481348 48” 13” 48” WG481624 48” 16” 24” WG481630 48” 16” 30” WG481636 48” 16” 36” WG481648 48” 16” 48”

Page 30 Section 1 SCISCI--FABFAB by Kloppenberg & Co 1-800-346-3246 www.kloppenberg.com MODULAR STAINLESS CABINETRY TALL UNIT

Common Features  Adjustable shelves (five, unless specified)  Solid back  Solid hinged door (units with doors)  Lock options available Overall Dimensions Open Front Tall Unit Product W D H Number TA181684 18” 16” 84” TA182284 18” 22” 84” TA241684 24” 16” 84” TA242284 24” 22” 84” TA301684 30” 16” 84” TA302284 30” 22” 84” TA361684 36” 16” 84” TA362284 36” 22” 84” TA421684 42” 16” 84” TA422284 42” 22” 84” TA481684 48” 16” 84” TA482284 48” 22” 84”

Hinged Door Tall Unit

Overall Dimensions Product W D H Number TB181684 18” 16” 84” TB182284 18” 22” 84” TB241684 24” 16” 84” TB242284 24” 22” 84”

 Add ‘L’ or ‘R’ to end of product number for door swing

SCISCI--FABFAB by Kloppenberg & Co Section 1 Page 31 1-800-346-3246 www.kloppenberg.com MODULAR STAINLESS CABINETRY TALL UNIT

Common Features  Adjustable shelves (five, unless specified)  Solid back  Solid hinged door (units with doors)  Lock options available

Hinged Door Tall Unit

Overall Dimensions Product W D H Number TC301684 30” 16” 84” TC302284 30” 22” 84” TC361684 36” 16” 84” TC362284 36” 22” 84” TC421684 42” 16” 84” TC422284 42” 22” 84” TC481684 48” 16” 84” TC482284 48” 22” 84”

Overall Hinged Door Tall Unit Dimensions Product W D H Number TD301684 30” 16” 84” TD302284 30” 22” 84” TD361684 36” 16” 84” TD362284 36” 22” 84” TD421684 42” 16” 84” TD422284 42” 22” 84” TD481684 48” 16” 84” TD482284 48” 22” 84”

 Double sided hinged doors at top and bottom section  Fixed center divider shelf  Four adjustable shelves

by Kloppenberg & Co Page 32 Section 1 SCISCI--FABFAB 1-800-346-3246 www.kloppenberg.com MODULAR STAINLESS CABINETRY TALL UNIT

Common Features  Adjustable shelves (five, unless specified)  Solid back  Solid hinged door (units with doors)  Lock options available

Solid Sliding Door Tall Unit

Overall Dimensions Product W D H Number TE301684 30” 16” 84” TE302284 30” 22” 84” TE361684 36” 16” 84” TE362284 36” 22” 84” TE421684 42” 16” 84” TE422284 42” 22” 84” TE481684 48” 16” 84” TE482284 48” 22” 84”

Framed Glass Hinged Door Tall Unit

Overall Dimensions Product W D H Number TF181684 18” 16” 84” TF182284 18” 22” 84” TF241684 24” 16” 84” TF242284 24” 22” 84”

 Add ‘L’ or ‘R’ to end of product number for door swing

SCISCI--FABFAB by Kloppenberg & Co Section 1 Page 33 1-800-346-3246 www.kloppenberg.com MODULAR STAINLESS CABINETRY TALL UNIT

Common Features  Adjustable shelves (five, unless specified)  Solid back  Solid hinged door (units with doors)  Lock options available

Framed Glass Hinged Door Tall Unit

Overall Dimensions Product W D H Number TG301684 30” 16” 84” TG302284 30” 22” 84” TG361684 36” 16” 84” TG362284 36” 22” 84” TG421684 42” 16” 84” TG422284 42” 22” 84” TG481684 48” 16” 84” TG482284 48” 22” 84”

Overall Dimensions Framed Glass Hinged Door Tall Unit Product W D H Number TH301684 30” 16” 84” TH302284 30” 22” 84” TH361684 36” 16” 84” TH362284 36” 22” 84” TH421684 42” 16” 84” TH422284 42” 22” 84” TH481684 48” 16” 84” TH482284 48” 22” 84”

 Double sided hinged doors at top and bottom section  Fixed center divider shelf  Four adjustable shelves

Page 34 Section 1 SCISCI--FABFAB by Kloppenberg & Co 1-800-346-3246 www.kloppenberg.com MODULAR STAINLESS CABINETRY TALL UNIT

Common Features  Adjustable shelves (five, unless specified)  Solid back  Solid hinged door (units with doors)  Lock options available

Framed Glass Sliding Door Tall Unit

Overall Dimensions Product W D H Number TJ301684 30” 16” 84” TJ302284 30” 22” 84” TJ361684 36” 16” 84” TJ362284 36” 22” 84” TJ421684 42” 16” 84” TJ422284 42” 22” 84” TJ481684 84” 16” 84” TJ482284 84” 22” 84”

SCISCI--FABFAB by Kloppenberg & Co Section 1 Page 35 1-800-346-3246 www.kloppenberg.com MODULAR STAINLESS CABINETRY SCRIBES/FILLERS

Common Features  Specify required width (W) = 1”, 2”, 6” etc

Base Cabinet End Scribe

Overall Dimensions Product W H Number BSF01(W)29 (W) 28 3/4” BSF01(W)35 (W) 34 3/4”

 Scribe between base cabinet and abutting to wall

Base Cabinet Rear Filler

Overall Dimensions Product W H Number BSF02(W)29 (W) 28 3/4” BSF02(W)35 (W) 34 3/4” BSF02(W)29 (W) 28 3/4” BSF02(W)35 (W) 34 3/4”

 Filler to close service chase at rear of base unit to wall

Page 36 Section 1 SCISCI--FABFAB by Kloppenberg & Co 1-800-346-3246 www.kloppenberg.com MODULAR STAINLESS CABINETRY SCRIBES/FILLERS

Common Features  Specify required width (W) = 1”, 2”, 6” etc

Base Cabinet Center Filler

Overall Dimensions Product W H Number BSF03(W)29 (W) 28 3/4” BSF03(W)29 (W) 34 3/4”

 For back to back base units

Base Cabinet Front Filler

Overall Dimensions Product W H Number BSF04(W)29 (W) 28 3/4” BSF04(W)35 (W) 34 3/4”

 For adjacent base units

SCISCI--FABFAB by Kloppenberg & Co Section 1 Page 37 1-800-346-3246 www.kloppenberg.com MODULAR STAINLESS CABINETRY SCRIBES/FILLERS

Common Features  Specify required width (W) = 1”, 2”, 6” etc

Base Cabinet Corner Filler

Overall Dimensions Product W H Number BSF05(W)29 (W) 28 3/4” BSF05(W)35 (W) 34 3/4”

 Corner filler for base cabinets joining at 90° angle

SCI-FAB by Kloppenberg & Co Page 38 Section 1 SCI-FAB 1-800-346-3246 www.kloppenberg.com MODULAR STAINLESS CABINETRY

KNEE SPACE COMPONENTS Common Features  Specify width requirement

Overall Dimensions Knee Space Panel Product W H Number KSP3029 30” 28 3/4” KSP3035 30” 34 3/4” KSP3629 36” 28 3/4” KSP3635 36” 34 3/4” KSP4229 42” 28 3/4” KSP4235 42” 34 3/4” KSP4829 48” 28 3/4” KSP4835 48” 34 3/4”

 Knee space panel to provide physi- cal and visual barrier

Knee Space Rail

Overall Dimensions Product W H Number KSR24 24” 4” KSR30 30” 4” KSR36 36” 4” KSR42 42” 4” KSR48 48” 4”

 Used to finish off front of knee space between cabinets when drawer unit is not used

SCISCI--FABFAB by Kloppenberg & Co Section 1 Page 39 1-800-346-3246 www.kloppenberg.com MODULAR STAINLESS CABINETRY

KNEE SPACE COMPONENTS Common Features  Specify width requirement

Knee Space Drawer

Overall Dimensions Product W H Number KSD130 30” 4” KSD136 36” 4”

 Drawer unit to span between base units

Knee Space Drawer

Overall Dimensions Product W H Number KSD242 42” 4” KSD248 48” 4”

 Drawer unit to span between base units

Page 40 Section 1 SCISCI--FABFAB by Kloppenberg & Co

1-800-346-3246 www.kloppenberg.com MODULAR STAINLESS CABINETRY

KNEE SPACE COMPONENTS Common Features  Specify width requirement

Countertop Finished End Panel

Overall Dimensions Product W H Number FEP22 22” 28 3/4” FEP22 22” 34 3/4” FEP29 29” 28 3/4” FEP29 29” 34 3/4”

 1” thick panel, finished both sides

SCISCI--FABFAB by Kloppenberg & Co Section 1 Page 41 1-800-346-3246 www.kloppenberg.com MODULAR STAINLESS CABINETRY SCRIBES/FILLERS

Common Features  Specify width requirement  Specify required width (W) = 1”, 2”, 6” etc

Overall Wall Cabinet Scribe Dimensions Product W D H Number WFS01(W)1324 (W) 13” 24” WFS01(W)1624 (W) 16” 24” WFS01(W)1330 (W) 13” 30” WFS01(W)1630 (W) 16” 30” WFS01(W)1336 (W) 13” 36” WFS01(W)1636 (W) 16” 36” WFS01(W)1348 (W) 13” 48” WFS01(W)1648 (W) 16” 48”

 Scribe between wall cabinet abutting to wall

Overall Wall Front Filler Panel Dimensions Product W D H Number WFS02(W)1324 (W) 13” 24” WFS02(W)1624 (W) 16” 24” WFS02(W)1330 (W) 13” 30” WFS02(W)1630 (W) 16” 30” WFS02(W)1336 (W) 13” 36” WFS02(W)1636 (W) 16” 36” WFS02(W)1348 (W) 13” 48” WFS02(W)1648 (W) 16” 48”

 For adjacent wall cabinets

Page 42 Section 1 SCISCI--FABFAB by Kloppenberg & Co 1-800-346-3246 www.kloppenberg.com MODULAR STAINLESS CABINETRY SCRIBES/FILLERS

Common Features  Specify width requirement  Specify required width (W) = 1”, 2”, 6” etc

Wall Cabinet Closure Panels

Overall Dimensions Product W Number WSF0313 13” WSF0316 16”

 Top and bottom panels to cover the opening at the inside corners of wall units

Tall Cabinet End Scribe

Overall Dimensions Product W D H Number TSF01(W)1684 (W) 16” 84” TSF01(W)2284 (W) 22” 84”

 Scribe between tall cabinet abutting to wall

SCISCI--FABFAB by Kloppenberg & Co Section 1 Page 43 1-800-346-3246 www.kloppenberg.com MODULAR STAINLESS CABINETRY SCRIBES/FILLERS

Common Features  Specify width requirement  Specify required width (W) = 1”, 2”, 6” etc

Wall Cabinet Closure Panels

Overall Dimensions Product W D H Number TSF02(W)1684 (W) 16” 84” TSF02(W)2284 (W) 22” 84”

 For adjacent tall cabinets

Tall Cabinet End Scribe

Overall Dimensions Product W D H Number TSF03(W)1684 (W) 16” 84” TSF03(W)2284 (W) 22” 84”

 Top panel to cover the opening at inside corners of tall cabinets

Page 44 Section 1 SCISCI--FABFAB by Kloppenberg & Co 1-800-346-3246 www.kloppenberg.com MODULAR STAINLESS CABINETRY SLOPING TOPS

Common Features  Recessed and pass through

Sloping Tops for Wall Mounted and Tall Storage Cabinets Overall Dimensions Product W D Number ST1813 18” 13” ST1816 18” 16” ST1822 18” 22” ST2413 24” 13” ST2416 24” 16” ST2422 24” 22” ST3013 30” 13” ST3016 30” 16” ST3022 30” 22” ST3613 36” 13” ST3616 36” 16” ST3622 36” 22” ST4213 42” 13” ST4216 42” 16” ST4222 42” 22” ST4813 48” 13” ST4816 48” 16” ST4822 48” 22”

SCISCI--FABFAB by Kloppenberg & Co Section 1 Page 45 1-800-346-3246 www.kloppenberg.com NOTESNOTES

______

NOTESNOTES 1-800-346-3246 www.kloppenberg.com STAINLESS STEEL COUNTERTOPS MADE TO ORDER

SECTION 2

Common Features  Countertop configurations with or without sinks  Sinks are available in integral, under mount and drop in styles  Integral back splashes, end splashes, edges, fan pitch drains, column and corner cut outs are built to order per specification  Sound deadening options available  Available in 304 or 316 with #4 finish as standard  Welded or bolted field joint available on all top features

Made To Order Counter Tops and Scullery Sinks Custom ordered to your specification, just give us a call!

1-800-346-3246 www.kloppenberg.com Section 2

STAINLESS STEEL COUNTERTOPS

TA BLE OF CONTENTS

Technical Product Data Part 1 - General 1 Part 2 - Products 2 Part 3 - Protection of Finished Work 2

Options Detail Countertop/Scullery Sink Detail Options 3

Countertops In Line Top 4 In Wall Top 5 L Shaped Top 6 U Shaped Top 7 Island Top 8

Scullery Sink Wall Mount 9 Free Standing 10 Cantilever 11

SCISCI--FABFAB by Kloppenberg & Co Section 2 Table of Contents 1-800-346-3246 www.kloppenberg.com MODULAR STAINLESS COUNTERTOPS

TECHNICAL PRODUCT DATA Part 1 – General

1.1 SCOPE OF WORK A. Includes all factory fabricated stainless steel Countertops and Sinks as required by the project drawings.

1.2 TYPICAL INCLUSIONS A. Countertops and Work Surfaces B. Legs and Wall Bracket supports . C. Inset, Drop-in, Under mount, and Scullery Sinks

1.3 TYPICAL EXCLUSIONS A. Wall framing and in-wall backing for anchorage support. B. Electrical. C. Mechanical. D. Work not directly associated with these stainless steel components.

1.4 MATERIALS A. Components fabricated from T304 stainless steel sheet, (T316 stainless steel available at additional cost) conforming to ASTM A240. All exposed surfaces polished to a No.4 brushed satin finish. (150/180 grit.)

1.5 SHOP DRAWINGS A. Submit complete shop drawings showing elevations, plans, cross sections and installation details. B. When locks are specified a complete keying schedule will be submitted with proposed keying for review by Architect and Owner.

1.6 SAMPLES A. Samples are available on request for Architect and Owner review and acceptance, The sample, if approved, may be incorporated into the project.

1.7 DELIVERY, STORGE AND HANDLING A. Schedule delivery of equipment per the customer so that spaces are sufficiently complete to allow for installation immediately following delivery. B. Protect finished surfaces from soiling or damage during handling and installation, Cover working surfaces with cardboard, Mark in large lettering "NO STANDING"

Page 1 Section 2 SCISCI--FABFAB by Kloppenberg & Co 1-800-346-3246 www.kloppenberg.com MODULAR STAINLESS COUNTERTOPS

TECHNICAL PRODUCT DATA Part 2 – Products

2.1 DESIGN REQUIREMENTS A. Straight, L-shaped, and U-shaped Countertops and Sinks are designed to accommodate the Architect’s or owner’s plans. B. Fixture holes at sinks are provided free of charge but must be specified before an order is released for fabrication.

2.2 CONSTRUCTION A. Countertops, work surfaces, and sinks are fabricated from #16 gauge T304 stainless steel, ASTM 240, with a No. 4 brushed satin finish, all corners are coved with a 3/4 in. radius. B. Under sides of countertops and work surfaces are sound deadened. C. Exterior of sinks are sound deadened where unexposed within casework. D. Exposed stainless steel sink bowls are polished on exposed sides, and sound deadened on bottom. E. Sinks are furnished with stainless steel basket drain and 1 1/2” X 4” tailpiece as an option. F. NSF rated sound deadening is available G. Legs are either 1 5/8” round or 2” square #16 gauge T304 stainless steel tubing with the same No. 4 brushed satin finish. H. Wall Bracket supports are #14 gauge T304 stainless steel with the same No. 4 brushed satin finish.

Part 3 – Protection of Finished Work

3.1 PROTECTION OF FINISHED WORK A. Products shipped with protective PVC film to help prevent surface damage in transit. B. Provide all necessary measures to protect countertops and equipment from exposure to other construction activity during installation. C. Advise contractor of procedures and precautions for protection of installed countertops and other equipment from damage by workers from other trades.

SCISCI--FABFAB by Kloppenberg & Co Section 2 Page 2 1-800-346-3246 www.kloppenberg.com

STAINLESS STEEL COUNTERTOPS OPTIONS DETAIL

Common Features  Configurations with or without sinks  Sinks are available in conventional and scullery sink styles  Integral back splashes, end splashes, edges, fan pitch drains, column and corner cut outs are built to order specifications  Sound deadening options available  Available in 304 or 316 With #4 finish as standards  Welded or bolted field joint available on all top features

Edge Options

Bull Nose Channel Edge Raised Box Channel Marine Edge

Sink Bowl

Integral Drop In Under Mount (Double Bowl Pictured)

Basket Drain

Page 3 Section 2 SCISCI--FABFAB by Kloppenberg & Co 1-800-346-3246 www.kloppenberg.com

STAINLESS STEEL COUNTERTOPS IN LINE TOP

Back Splash End Splash Fixture Holes

Raised Umbilical Cutout

Column Cutout

Sink Bowl

End Column Edge Options Cutout

Fan Pitch Drain Partial End Splash

Descriptions: Edge Options Bull nose, channel edge, marine edge Sink Bowl Integral, drop in, under mount, any size End Splash Left hand, right hand, 1” deep x 4” high standard—Custom heights available Back Splash 1” deep x 4” high standard—Custom heights available Fan Pitch Drain 36” max x 3/8” deep Fixture Holes Fixture mounting holes are provided at no charge if size and location are specified at time of order Column Cutout Custom per specification Raised Umbilical Custom per specification

SCISCI--FABFAB by Kloppenberg & Co Section 2 Page 4 1-800-346-3246

STAINLESS STEEL COUNTERTOPS IN WALL TOP

Back Splash End Splash Fixture Holes

Fan Pitch Drain

Sink Bowl Edge Options

Page 5 Section 2 SCISCI--FABFAB by Kloppenberg & Co 1-800-346-3246 www.kloppenberg.com

STAINLESS STEEL COUNTERTOPS L SHAPED TOP

End Splash Back Splash

Fixture Holes

Edge Options Fan Pitch Drain

Sink Bowl

SCISCI--FABFAB by Kloppenberg & Co Section 2 Page 6 1-800-346-3246 www.kloppenberg.com

STAINLESS STEEL COUNTERTOPS U SHAPED TOP

Common Features  Countertop configurations with or without sinks  Sinks are available in integral, under mount and drop in styles  Integral back splashes, end splashes, edges, fan pitch drains, column and corner cut outs are built to order per specification  Sound deadening options available  Available in 304 or 316 with #4 finish as standard  Mechanical seams, welded or bolted field joints, are available for larger countertops.

Fan Pitch Drain

Fixture Holes End Splash

Back Splash

Edge Options

Sink Bowl

Mechanical Seams

Finished End Splash

Page 7 Section 2 SCISCI--FABFAB by Kloppenberg & Co 1- 800-346-3246

STAINLESS STEEL COUNTERTOPS ISLAND TOP

Common Features  Sound deadening options available  Available in 304 or 316 with #4 finish as standard

Edge Options

Descriptions: Edge Options Bull nose, channel edge, marine edge

SCISCI--FABFAB by Kloppenberg & Co Section 2 Page 8 1-800-346-3246 www.kloppenberg.com

STAINLESS STEEL SCULLERY SINK WALL MOUNT

Features  Integral back splashes, edges, fan pitch drains are built to order specifications  Drain options available  Available in 304 or 316 with #4 finish as standard

Back Splash

Edge Options Fixture Holes

Fan Pitch Drain Sink Bowl

Descriptions: Edge Options Bull nose, channel edge, marine edge Sink Bowl Integral End Splash Left hand, right hand, 1” deep x 4” high standard—Custom heights and edges available Back Splash 1” deep x 4” high standard—Custom heights available Fan Pitch Drain 36” max x 3/8” deep Vertical Fixture Holes Fixture mounting holes are provided at no charge if size and location are specified at time of order

Page 9 Section 2 SCISCI--FABFAB by Kloppenberg & Co 1-800-346-3246 www.kloppenberg.com

STAINLESS STEEL SCULLERY SINK FREE STANDING

Features  Integral back splashes, edges, fan pitch drain are built to order specifications  Drain options available  Available in 304 or 316 with #4 finish as standard

Fan Pitch Drain

Back Splash

Edge Options

Sink Bowl

Leg Options

Descriptions: Edge Options Bull nose, channel edge, marine edge Sink Bowl Integral End Splash Left hand, right hand, 1” deep x 4” high standard—Custom heights available Back Splash 1” deep x 4” high standard—Custom heights and edges available Fan Pitch Drain 36” max x 3/8” deep Vertical Fixture Holes Fixture mounting holes are provided at no charge if size and location are specified at time of order Leg Options 1 5/8” Round or 2” Square Tube, bullet style and flanged adjustable feet options Shelving Optional under shelving available

SCISCI--FABFAB by Kloppenberg & Co Section 2 Page 10 1-800-346-3246 www.kloppenberg.com

STAINLESS STEEL SCULLERY SINK CANTILEVER

Features  Back splashes, edges, fan pitch drains are built to order specifications  Drain options available  Available in 304 or 316 With #4 finish as standard

Back Splash Edge Options

Sink Bowl

Fan Pitch Drain

Leg Options

Page 11 Section 2 SCISCI--FABFAB by Kloppenberg & Co 1-800-346-3246 www.kloppenberg.com

NOTESNOTES

______

NOTESNOTES 1-800-346-3246 www.kloppenberg.com

STAINLESS STEEL LAB FURNISHINGS MADE TO ORDER

SECTION 3

Made To Order High Density Storage, Work Tables, Case Carts, Shelving, Hoods, Modular Wall Panels and Trim

Custom ordered to your specification, just give us a call!

1-800-346-3246 www.kloppenberg.com Section 3

STAINLESS STEEL LAB FURNISHINGS

TABLE OF CONTENTS

Technical Product Data

Part 1 - General 1

Part 2 - Products 2

Part 3 - Protection of Finished Work 2

High Density Storage

Pegasus Cabinet 3

Tables Wall Table 4

Island Table 5 Portable Table 6

Case Cart Cart 7

Shelving

Concealed Bracket 8

Front Stop 9

Wall Bracket 10

Canopy Hood

Hood 11

Modular Wall

Wall 12

Trim

Trim Pieces 13

SCISCI--FABFAB by Kloppenberg & Co Table of Contents 1-800-346-3246 www.kloppenberg.com

STAINLESS STEEL LAB FURNISHINGS

TECHNICAL PRODUCT DATA Part 1 – General

1.1 SCOPE OF WORK Includes all factory fabricated stainless steel Work Tables, Case Carts, High Density Storage, Shelv- ing, Hoods and Modular Wall Panels as required by the project drawings.

1.2 TYPICAL INCLUSIONS A. Legs and Wall Bracket supports . B. Case Carts, High Density Storage, Shelving, Hoods and Modular Wall Panels

1.3 TYPICAL EXCLUSIONS A. Wall framing and in-wall backing for anchorage support. B. Electrical. C. Mechanical. D. Work not directly associated with these stainless steel components.

1.6 SAMPLES Samples are available on request for Architect and Owner review and acceptance, The sample, if approved, may be incorporated into the project.

1.7 DELIVERY, STORGE AND HANDLING A. Schedule delivery of equipment per the customer so that spaces are sufficiently complete to allow for installation immediately following delivery. B. Protect finished surfaces from soiling or damage during handling and installation, Cover working surfaces with cardboard, Mark in large lettering "NO STANDING"

Page 1 Section 3 SCISCI--FABFAB by Kloppenberg & Co 1-800-346-3246 www.kloppenberg.com

STAINLESS STEEL LAB FURNISHINGS

TECHNICAL PRODUCT DATA Part 2 – Products

2.1 DESIGN REQUIREMENTS A. Hoods and Modular Wall enclosures are designed to accommodate the Architect’s or owner’s plans. B. Modular walls are available in single- or double-pan construction, with and without insulation. C. Modular Walls are screwed together at installation and may be disassembled for machine access if necessary although access panels may also be specified. D. Hoods have standard condensation gutters and drains that can be specified with lights and fil- ters. E. Façade panels available to cover hoof suspension to ceiling. F. Hoods and countertops can be made in sections to facilitate installation.

2.2 CONSTRUCTION A. NSF rated sound deadening is available B. Legs are either round or square #16 gauge T304 stainless steel tubing with the same No. 4 brushed satin finish. C. Wall Bracket supports are #14 gauge T304 stainless steel tubing with the same No. 4 brushed satin finish. D. Hoods are fabricated from #18 gauge T304 stainless steel, ASTM 240, with a No. 4 brushed satin finish E. Modular Wall Panels are fabricated from #16 gauge if single pan and 18 gauge if double pan, T304 stainless steel, ASTM 240, with a No. 4 brushed satin finish.

Part 3 – Protection of Finished Work

SCISCI--FABFAB by Kloppenberg & Co Section 3 Page 2 1-800-346-3246 www.kloppenberg.com

STAINLESS STEEL HIGH DENSITY STORAGE

Common Features  Recessed or pass through design

High Density Storage Shelves

Door Options

Overall Dimensions Product W D Description E Single 27 1/4” 18 17/16” E Double 54 1/5” 18 17/16” U Single 19 3/8” 26 5/16” U Double 38 3/4” 26 5/16”

Descriptions: Door Options Glass, solid, hinged and sliding

Page 3 Section 3 SCISCI--FABFAB by Kloppenberg & Co 1-800-346-3246 www.kloppenberg.com

STAINLESS STEEL WORK TABLE WALL TABLE

Common Features  Back splashes and edges are built to order per specification  Finished bottom option available  Available in 304 or 316 with #4 finish

Edge Options Back Splash

Optional Square Tubing Frame

Leg Options

Descriptions: Edge Options Bull nose, channel edge, marine edge Back Splash 1” deep x 4” high standard—Custom heights available Leg Options 1 5/8” round or 2” square tube, bullet style and flanged adjustable feet options Shelving Optional under shelving available Dimensions Standard dimensions are 24” or 30” deep x 36”, 48”, 60” or 72” wide x 36” high—Custom sizing available

SCISCI--FABFAB by Kloppenberg & Co Section 3 Page 4 1-800-346-3246 www.kloppenberg.com

STAINLESS STEEL WORK TABLE ISLAND TABLE

Common Features  Finished bottom option available  Available in 304 or 316 with #4 finish

Edge Options

Optional Finished Bottom

Round Leg Option

Under Shelf

Descriptions: Edge Options Bull nose, channel edge, marine edge Leg Options 1 5/8” round (standard or adjustable height 30”-36”) or 2” square tube, bullet style and flanged adjustable feet options Shelving Optional under shelving available Dimensions Standard dimensions are 24” or 30” deep x 36”, 48”, 60” or 72” wide x 36” high—Custom sizing available

Page 5 Section 3 SCISCI--FABFAB by Kloppenberg & Co 1-800-346-3246 www.kloppenberg.com

STAINLESS STEEL WORK TABLE PORTABLE

Common Features  Finished bottom option available  Available in 304 or 316 with #4 finish

Edge Options

Leg Options

Casters

Descriptions: Edge Options Bull nose, channel edge, marine edge Leg Options 1 5/8” round or 2” square tube, bullet style and flanged adjustable feet options Shelving Optional under shelving available Casters Non marring tread available, poly lock gray 5” diameter with swivel stem and break Dimensions Standard dimensions are 24” or 30” deep x 36”, 48”, 60” or 72” wide x 36” high—Custom sizing available

SCISCI--FABFAB by Kloppenberg & Co Section 3 Page 6 1-800-346-3246 www.kloppenberg.com

STAINLESS STEEL CASE CART

Common Features  Available in 304 or 316 with #4 finish  Autoclave class available  Locking doors available

Edge Options Hinged Doors Handle

Pull Out Wrap Around Shelving Bumper

Casters

Descriptions: Shelving Full Slide out, perforated, adjustable Hinges Full 270º motion Doors Solid or glass—open lock position Bumper Full wrap or corner only Edge Options Square Return—Marine edge Casters Non marring tread available, poly lock gray 5” diameter with swivel stem and brake option Dimensions Standard dimensions are 22” deep x 30”, 36”, 42” or 48” wide x 36” high—Custom sizing available

Page 7 Section 3 SCISCI--FABFAB by Kloppenberg & Co 1-800-346-3246 www.kloppenberg.com

STAINLESS STEEL SHELVING FRONT STOP

Common Features  Finished bottom option available  Perforated steel shelving available  Available in 304 or 316 with #4 finish

12” Standards

48” Stop Options

Standards

72”, 84” and 96” available Bracket

Descriptions: Bracket 14 Gauge stainless steel—Bookend or bottom mount Standards 12” to 48” (measurable in 6” increments in length), 72”, 84” and 96” Shelf 18 gauge stainless steel Stop Options Stainless steel lip or 1/4” seismic rods

SCISCI--FABFAB by Kloppenberg & Co Section 3 Page 8 1-800-346-3246 www.kloppenberg.com

STAINLESS STEEL SHELVING WALL BRACKET

Common Features  Finished bottom option available  Perforated steel shelving available  Available in 304 or 316 with #4 finish

Standards

Bracket Options

Descriptions: Bracket Options 14 Gauge stainless steel—Bookend or bottom mount Standards 12” to 48” (measurable in 6” increments in length), 72”, 84” and 96” Shelf 18 gauge stainless steel

Page 9 Section 3 SCISCI--FABFAB by Kloppenberg & Co 1-800-346-3246 www.kloppenberg.com

STAINLESS STEEL CANOPY HOOD

Common Features  Available in 304 or 316 With #4 finish as standard  Can be constructed in single piece or multiple pieces  Fully welded option available  Lighting option available  Baffle option available

Hanger Mount

Condensation Drain Baffle Plate

Exhaust Duct

Skirting/Trim

Descriptions: Exhaust Duct Custom sized 6” to 24” OD x 2” h Skirting/Trim Option available Hanger Mount 11 gauge—Designed for suspension Baffle Plate Optional—Solid or perforated Condensation Drain 1 1/4” OD standard—1ea in rear corners

SCISCI--FABFAB by Kloppenberg & Co Section 3 Page 10 1-800-346-3246 www.kloppenberg.com

STAINLESS STEEL MODULAR WALL

Features  Available in 304 or 316 With #4 finish as standard  Single panel or double panel construction  Insulated  Vented  Openings per specification

Descriptions: Custom Built per specification Access Panel Available for ease of maintenance per specification Door Section Available per specification Viewing Window Available per specification Louvers Available per specification Vents Available per specification

Page 11 Section 3 SCISCI--FABFAB by Kloppenberg & Co 1-800-346-3246 www.kloppenberg.com

STAINLESS STEEL TRIM

Common Features  304 or 316 #4 finish stainless steel

Corner Guard

Descriptions: 16 gauge made to specification

Toe Kick

Descriptions: 16 gauge made to specification

SCISCI--FABFAB by Kloppenberg & Co Section 3 Page 12 1-800-346-3246 www.kloppenberg.com

STAINLESS STEEL TRIM

Common Features  304 or 316 #4 finish stainless steel

Umbilical

Descriptions: 18 gauge made to specification

Wainscot

Descriptions: 18 gauge made to specification

Page 13 Section 3 SCISCI--FABFAB by Kloppenberg & Co 1-800-346-3246 www.kloppenberg.com NOTESNOTES

______

NOTESNOTES 1-800-346-3246 www.kloppenberg.com SCISCI--FABFAB by Kloppenberg & Co 1-800-346-3246 www.kloppenberg.com www.kloppenberg.com