Sony High Definition Product Guide 2006

3LCD is a trademark of Seiko Epson Corporation. HR Trinitron is a trademark of Sony Corporation Advanced HAD is a trademark of Sony Corporation i.LINK is a trademark of Sony Corporation Air Shot is a trademark of Sony Corporation IBM is a registered trademark of International Business Ma- Anton Bauer is a registered trademark of Anton Bauer Inc. chines Corporation Apple Final Cut Pro is a trademark of Apple Computer, Inc. InfoLITHIUM is a trademark of Sony Corporation Apple is a registered trademark of of Apple Computer Inc Intel is a registered trademark of Intel Corporation Ati RADEON is a trademark and/or registered trademark of ATI Java is a trademark of Sun Microsystems, Inc. Technologies Inc Library Management System is a trademark of Sony Corpora- Belden is a registered trademark of Cooper Industries tion Betacam is a trademark of Sony Corporation Linux is a trademark of Linus Torsvalds Betacam SP is a trademark of Sony Corporation Macintosh is a registered trademark of of Apple Computer Inc Betacam SX is a trademark of Sony Corporation MediaVenue is a trademark of Sony Corporation Bitstream is a trademark of Sony Corporation Memory Stick is a trademark of Sony Corporation Canon is a registered trademark of Canon Inc Microsoft is a registered trademark of Microsoft Corporation Carl Zeiss is a registered trademark of Carl Zeiss, Inc. MPEG IMX is a trademark of Sony Corporation CCD IRIS is a trademark of Sony Corporation Pentium is a registered trademark of Intel Corporation Celeron is a trademark of Intel Corporation. Pinnacle Liquid is a trademark of Pinnacle. Systems, Inc. ChromaTRU is a trademark of Sony Corporation Power HAD EX is a trademark of Sony Corporation Cineframe is a trademark of Sony Corporation Power HAD is a trademark of Sony Corporation Cinematone Gamma is a trademark of Sony Corporation Professional Disc is a trademark of Sony Corporation Clear Scan (CLS) is a trademark of Sony Corporation QSDI is a trademark of Sony Corporation Clear Scan is a trademark of Sony Corporation QuickTime is a trademark of Apple Computer, Inc. ClipLink is a trademark of Sony Corporation Side Shot is a trademark of Sony Corporation Dell is a trademark of Dell Inc. SMPTE is a trademark of the Society of Motion Picture and Digital BETACAM is a trademark of Sony Corporation Television Engineers Digital SKETCH is a trademark of Sony Corporation Sonaps is a trademark of Sony Corporation Digital SPARKLE is a trademark of Sony Corporation Sony is a registered trademark of Sony Corporation DigitalMaster is a trademark of Sony Corporation Sony Vegas is a trademark of Sony Corporation Dolby is a trademark of Dolby Laboratories Licensing SXRD is a trademark of Sony Corporation DVCAM is a trademark of Sony Corporation Tele-File is a trademark of Sony Corporation DynaLatitude is a trademark of Sony Corporation Vario-Sonnar T* is a trademark of Carl Zeiss AG. Dynamic Tracking (DT) is a trademark of Sony Corporation Windows 2000 is a registered trademark of Microsoft Corpora- Ethernet is a registered trademark of Xerox Corporation tion Exwave HAD is a trademark of Sony Corporation Windows XP is a registered trademark of Microsoft Corpora- Flexicart is a trademark of Sony Corporation tion FlexiPad is a trademark of Sony Corporation X-Algorithm is a trademark of Sony Corporation Fujinon is a registered trademark of Fuji Photo Film Co., Ltd XDCAM is a trademark of Sony Corporation HAD sensor is a trademark of Sony Corporation Xeon is a trademark of Intel Corporation HDCAM is a trademark of Sony Corporation Ziris, Ziris Transfer, Ziris Create, Ziris Manage and Ziris View HDCAM-SR is a trademark of Sony Corporation are trademarks of the Sony Corporation HDV is a trademark of Sony Corporation and Victor Company All other trademarks are property of their respective owners of Japan Limited

© 2006. Sony Australia Limited. All rights reserved. Reproduction in whole or in part without written permission is prohibited. Features and speciﬁcations subject to change without notice. Sony Australia Limited. CONTENTS i

SONY HIGH DEFINITION FORMAT OVERVIEW...... 1

CAMCORDERS - HDCAM...... 3

CAMCORDERS - XDCAM HD...... 11

CAMCORDERS - HDV...... 17

CAMCORDERS - ACCESSORIES...... 23

CAMERAS - HD STUDIO...... 33

CAMERAS - HD STUDIO - ACCESSORIES...... 49

VIDEO RECORDERS/PLAYERS - HDCAM SR...... 69

VIDEO RECORDERS/PLAYERS - HDCAM...... 77

VIDEO RECORDERS/PLAYERS - XDCAM HD...... 99

VIDEO RECORDERS/PLAYERS - HDV...... 105

DIGITAL PRODUCTION SWITCHERS...... 111

HD MONITORS - LCD...... 119

HD MONITORS - CRT...... 133

HD PERIPHERALS...... 141

HD LARGE VENUE PROJECTORS...... 155

HD MEDIA...... 158

PRODUCT INDEX...... 160 The World is changing.

Consumers are demanding a more compelling, more immersive entertainment experience. They want bigger, clearer pictures and multi-channel surround sound to enjoy on the latest generation of widescreen television receivers. In other words...they want High Definition. The first wave of HD broadcasts, already launched in Australia and around the world, will soon be complemented by even more options to enjoy High Definition content - from broadband networks and Blu-ray packaged media to new-generation gaming consoles. HD pictures also look stunning when presented to cinema audiences using the astonishing SXRD 4K projector from Sony, delivering four times the resolution of today’s highest quality, commercially available projectors. With viewing audiences, broadcasters and advertisers switching on to better- looking, more seductive pictures, now’s the time to embrace the business opportunities of High Definition. Whether you’re shooting prestige commercials, flagship dramas or corporate videos, High Defi- nition gives you the opportunity to capture your audience’s imagination with vastly improved on-screen look and enhanced international marketability. Just as importantly, High Definition increases the shelf life of all of your content - making it the cost-effective key to future-proofing your business. Sony has been at the forefront of HD development for over 20 years. We know that every professional broadcaster and programme-maker has their own highly professional production agenda, creative preferences and budgetary constraints. That’s why we’ve created an integrated family of four Sony High Definition formats to suit the needs of any project. By giving you the choice to select exactly the right format for any type of production, Sony High Definition means that you never need to compromise your personal vision.

Which High Deﬁnition format is right for you?

Sony offers four High Deﬁnition format options, all capturing images at full 1080-line resolution. From entry-level HDV to ultimate quality HDCAM SR, the Sony HD family delivers a balanced blend of features and performance, and is tailored to a wide range of real-world creative needs

“...the cost effective key to future- prooﬁng your business.”

Sony HD Product Guide SONY HIGH DEFINITIONCAMCORDERS FORMAT OVERVIEW - HDCAM iii

Ultimate quality for the most discerning users.

Preferred by leading media industry players thanks to its unparalleled picture quality and ultra-mild signal compression, HDCAM SR has been developed to accommodate the most demanding applications. From movies and commercials to sophisticated green screen effects, CGI, digital intermediates, telecine transfers and archiving, there’s no other format to match the peerless performance of HDCAM SR. Delivering breathtaking natural, detailed pictures, HDCAM SR ensures that your ﬂ agship productions stand out. And with twelve uncompressed digital audio tracks, HDCAM SR is also perfect for multi-channel surround sound mastering. When nothing less than the very best picture quality and performance will do, HDCAM SR is the ultimate choice of the world’s most discerning creative professionals

Prestige results on Standard Deﬁ nition budgets.

The ideal medium for drama, documentaries, commercials and mainstream television programming, HDCAM has become the High Defi nition format of choice for the most discerning users. Already chosen as an “in-house” format by broadcasters around the world (with more than 20,000 sales worldwide) HDCAM offers superb High Defi nition picture performance whilst offering a convenient choice of workfl ow options. Whether you prefer to post-produce in HDCAM or down-convert for editing within existing SD infrastructures, HDCAM offers greater fl exibility to match your creative preferences and operational needs. Shoot at 25P with the HDW-750P to give your pictures a prestige, fi lmic look. Alternatively, select 50i or 60i for a more immediate feel, OVERVIEW HIGH DEFINITION FORMAT SONY especially with fast-moving action - the choice is yours. Providing an ideal migration to High Defi niton for custom- ers working within Standard Defi nition budgets, HDCAM future-proofs and increases the international marketability of all your programming.

High Deﬁ nition quality meets 21st century workﬂ ow.

XDCAM HD unites true High Defi nition picture quality with the benefi ts of non-linear, fi le based workfl ow and affordable media costs. Positioned between HDV and HDCAM in terms of picture quality, features and price, XD- CAM HD builds on the XDCAM system that has already transformed workfl ow effi ciency in the Standard Defi nition world. XDCAM HD records High Defi nition pictures onto a rugged removeable optical disc. MPEG long GOP encoding ensures crisp, clear picture quality with true 1080-line resolution. The recording data rate is selectable between 35Mbps, 25Mbps and 18Mbps, allowing picture quality and recording time to be selected in response to the demands of each specifi c project. Like its Standard Defi nition sibling, XDCAM HD automatically records low-resolution proxy fi les, thumbnail pictures and metadata onto the disc alongside high resolution video. Already supported by a growing number of third party developers, XDCAM HD takes High Defi nition workfl ows fi rmly into the 21st century.

Affordable entry point to the world of High Deﬁ nition.

With Sony HDV, the benefi ts of High Defi nition are at last accessible to everyone. Offering an ideal migration path from DVCAM to entry-level HD production, HDV records pictures at 1080-line resolution onto a standard DV format cassette. As well as reducing camcorder size and weight dramatically, use of this smaller cassette size cuts media costs. It also allows tri-format HDV/DVCAM/DV recording and playback with the same camcorder or VTR deck - reducing hardware inventory requirements, storage and transportation costs. A step up in quality from DVCAM, HDV makes it even more affordable for programme-makers to experience the benefi ts of HD without a big price premium. Sony HD Product Guide CAMCORDERS - HDCAM 3

CAMCORDERS - HDCAM

HDW-F900R...... 4 HDW-750P...... 6 HDW-730S...... 8 CAMCORDERS - HDCAM CAMCORDERS - HDCAM HDW-F900R HDCAM Camcorder

The new Sony HDW-F900R is a ground-breaking digital HDCAM camcorder that extends both the company’s unique digital heritage and its unrivalled experience in the art of imaging. This new reﬁ ned version of the highly acclaimed HDW-F900 offers the same high performance in a smaller and lighter camera body, and also includes HD-SDI and optional SDI output capabilities. • HDCAM recording • Multi-format recording Progressive: 23.98P, 24P, 25P, 29.97P, Interlace: 50i, 59.94i • Compact and Light-weight Design • Low Power Consumption • 2/3 inch FIT CCDs • 12bit A/D Converter • Supports CVP File Editor (Gamma Creation Soft- ware) HDW-F900R shown with optional battery, tripod, lens, fol- low focus and matte box system

Supplied Accessories Optional Accessories - continued HKDW-703, Picture Cache Board Microphone, Super cardioid directional, external HKDW-902R, 2-3 Pull-down/Down-Converter Board power supply type (1) HKDW-905R, Slow Shutter/Image Inverter Board XLR connector cover (4) Part No. 1-547-341-11, Fog-proof Filter Shoulder strap (1) Part No. 3-174-685-01, 1/8 ND Filter Operation guide (1) Part No. 3-174-683-01, 1/32 ND Filter Operation manual (1) Part No. 3-174-682-01, Cross Filter Operation manual CD-ROM (1) Part No. 3-186-442-01, Mounting Ring Part No. A-8314-798-A, Viewfi nder Eyepiece (High performance x3, with soft cushion) Optional Accessories Part No. A-8262-537-A, Viewfi nder Eyepiece (High VCT-14, Tripod Adapter magnifi cation) HDVF-C30W, HD LCD Colour Viewfi nder Part No. A-8262-538-A, Viewfi nder Eyepiece (Low HDVF-C730W, HD LCD Colour Viewfi nder magnifi cation) HDVF-20A, CRT B/W Viewfi nder Part No. A-8267-737-A, Viewfi nder Eyepiece BP-GL65/GL95/L60S, Info Li-Ion Battery (Standard magnifi cation with special compensation BC-M150/L70, Battery Charger for aberrations) AC-DN10, AC Adapter BCT-6HD/12HD/22HD/32HD/40HD, HDCAM Tape Cassette BKW-401, Viewfi nder Rotation Bracket RM-B750, Remote Control Unit RM-B150, Remote Control Unit ECM-674/678 Microphone CAC-12 Microphone holder CCXA-53 Audio cable LC-DN7, Hard Carrying Case LC-DS300SFT, Soft Carrying Case Maintenance manual HKDW-702, Down-Converter Board

Sony HD Product Guide CAMCORDERS - HDCAM 5

Speciﬁcations (HDW-F900R)

General Picture elements Mass 1920 (H) x 1080 (V) 5.4 kg with typical ENG lens, cassette and BP-GL95 Battery Optical system Power requirement F1.4 prism system DC 12 V (+5.0 V/-1.0 V) Built-in filters Power consumption A: 5600 K B: 3200 K C: 4300 K D: 6300 K 32 W (With 12 V power supply, REC mode, with HDVF-20A) 1: Clear 2: 1/4 ND 3: 1/16 ND 4: 1/64 ND Operating temperature Shutter speed (1080/24P mode) 0 °C to +40 °C 1/32, 1/48, 1/50, 1/60, 1/96, 1/125, 1/250, 1/500, 1/1000 (s) Storage temperature Clear scan -20 °C to +60 °C (ECS) 24 to 7000 Hz (Minimum setting depends on frame rate se Operating humidity lected) 25 % to 85 % (Relative humidity) Lens mount Continuous operating time Special bayonet mount 110 min (With BP-GL95) Sensitivity Inputs/outputs f10.0 at 2000 lux, 89.9 % reflective, At 24 fps, with a 1/48-second Genlock video input shutter speed (equivalent to a 180º film camera shutter setting), the BNC, 1.0 Vp-p 75 Ω exposure index is approximately equivalent to 300 ISO. Time code input BNC, 0.5 V to 18 Vp-p, 10 kΩ Audio CH1/CH2 input XLR-3-pin type (Female), -60 dBu/-50 dBu /-40 dBu/+4 dBu/AES/EBU MIC input CAMCORDERS - HDCAM XLR-5-pin type (Female), -60 dBu/-50 dBu /-40 dBu LPF 14 kHz: -8 dB Test output BNC (1), 1.0 Vp-p, 75 Ω, unbalanced / HD SDI output BNC (1), 0.8 Vp-p, unbalanced Audio output XLR-5-pin type (Male), 0 dBm Time code output BNC, 1.0 Vp-p, 75 Ω Earphone Mini-jack, 8 Ω, - ∞ to –18 dBs variable DC input XLR-4-pin type (Male), 11 to 17 V DC DC output 11 to 17 V DC, Max. 100 mA Lens 12-pin Remote 8-pin VTR section Recording format HDCAM Tape speed Approx. 77.4 mm/s (24P mode) Playback/Recording time 40 min (59.94i, 29.97P), 48 min (50i,25P), 50 min (24P, 23.98P), with BCT-40HD Fast forward/rewind time 5 min with BCT-40HD Recommended tape Sony BCT-6HD/12HD/22HD/32HD/40HD Sampling frequency Y: 74.25 MHz, PB/PR: 37.125 MHz Quantization 12 bit/sample of input-output signals (8 bit sample for internal compression process) Error correction Reed-Solomon code Error concealment Adaptive three dimensional Audio performance (Playback with standard HDW-F500) Frequency response 20 Hz to 20 kHz, +0.5 dB/-0.8 dB Dynamic range More than 85 dB (Emphasis ON) Distortion 0.08 % Max. Cross talk -70 dB Wow & flutter Below measurable limit Camera section Pickup device 3-chip 2/3-type FIT type CCD HDW-750P HDCAM Camcorder

The HDW-750P camcorder combines high quality, easy operation and added reliability in an affordable, well balanced solution. It records 1920 x 1080 high deﬁ nition pictures to the successful HDCAM format. Additionally, it also offers 50i/25P operation and by using the optional HKDW-702 internal down-converter card, it is also possible to simultaneously record or monitor a high quality down converted SD-SDI or composite PAL signal. • 1920 x 1080, 2.2 Million Pixel FIT CCD • Switchable 50i/25P operation, ideal for ENG, EFP or ﬁ lm style production • 10-bit A/D and Advanced Digital Signal Processor • Optional picture cache board for 7 seconds loop recording and time lapse recording (HKDW-703) HDW-750P shown with optional lens, WRR-855 wireless • Extensive audio features: slot in wireless mic, 2 microphone receiver and battery. headphone outputs, Stereo front microphone, 4 channel audio recording capabilities. • 2 x HD SDI Output standard • Memory Stick™ setup system stores and transfers camera setups • Turbo gain, intelligent light shoe,2 assignable buttons • Compact and lightweight – only 5.4kgs

Supplied Accessories Optional Accessories - continued HDVF-20A, HD Electric viewfi nder (1) AC-DN10, AC Adapter Stereo microphone, Super cardioid directional, exter- MSH-128, Memory Stick nal power supply type (1) WRR-855A/855B, UHF Synthesized Tuner Unit Operation manual (1) WRR-810A/860A/862A/862B, UHF Synthesized Lens cap (1) Tuner Unit Shoulder strap (1) (A-8278-057-A, WRR mounting bracket required) XLR cap (4) ECM-MS5, Stereo Microphone C-74, Microphone Optional Accessories CAC-12, Microphone Holder HKDW-702, HD-SD Down-Converter Board CRS-3P, Cradle Suspension HKDW-703, Picture Cache Board CCXA-53, Audio Cable VCT-14, Tripod Adapter MLB-1M-100, Memory Label BKW-401, Viewfi nder Rotation Unit BCT-22HD/40HD, HDCAM tape cassette RM-B150, Remote Control Unit BCT-HD12CL, Cleaning Cassette RM-B750, Remote Control Panel LC-DS300SFT, Soft Carrying Case HDVF-C30W, HD LCD Colour Viewfi nder HDVF-C730W, HD LCD Colour Viewfi nder BP-GL95/GL65 Info Li-Ion Battery BC-M150, Battery Charger BC-L70, Battery Charger AC-DN2B, AC Adapter

Sony HD Product Guide CAMCORDERS - HDCAM 7

Speciﬁcations (HDW-750P)

General Audio performance (Playback with standard HDW- Mass 500/F500/M2000/M2100) Approx. 3.7 kg (8 lb 3 oz): Main Body Approx. 5.4 kg (11 lb 14 oz) (with Frequency response MIC, VF, BCT-40HD, BP-L60A) 20 Hz to 20 kHz, + 0.5 dB/-1.0 dB Dimensions (WxHxD) Dynamic range 127 x 206 x 308 mm (5 x 8 1/8 x 12 1/4 inch) More than 85 dB (emphasis ON) Power requirement Distortion(at 1kHz, emphasis ON, reference level) DC 12V + 5.0 V/-1.0 V Less than 0.08% Power consumption Cross talk(at 1kHz, reference level) 34 W (with 12 V power supply, REC mode, without VF) 33 W (with 12 Less than -70 dB V power supply, REC mode, without VF) Wow & ﬂutter Operating temperature Below measurable limit 0 °C to +40 °C (+32 °F to +104 °F) Camera section (Performance) Storage temperature Pickup device -20 °C to +60 °C (-4 °F to +140 °F) 3-chip 2/3-inch type FIT CCD 3-chip Operating humidity Effective Picture elements 25% to 80% (Relative humidity) 1920 (H) x 1080 (V) Continuous operating time Optical system Approx. 110 min with BP-L60A, Approx. 130 min with BP-L90A F1.4 prism (Equipped with Quarz Filter) Inputs/outputs connectors Lens mount Genlock video input Special bayonet mount

BNC type x 1, 1.0 Vp-p, 75 Ω Built-in filters CAMCORDERS - HDCAM Time code input ND 1: Clear, 2: 1/4ND, 3: 1/16ND, 4: 1/64ND CC A: CROSS, B: BNC type x 1, 0.5 V to 18 Vp-p, 10 kΩ 3200K, C: 4300K, D: 6300K Audio CH1/CH2 input Sensitivity (2000 lux, 89.9% reflectance) XLR-3-pin type x 2 (Female), -60 dBu/+4 dBu selectable, high imped- F10.0 (typical) Equivalent to ISO 600 or more ance, balanced (0 dBu = 0.775 Vrms) Minimum illumination Mic input (Stereo) Approx. 0.3 lx (F1.4 lens, +42 dB turbo gain) XLR-5-pin type x 1 (Female), -60 dBu Smear level Test output -135 dB BNC type x 1, 1.0 Vp-p, 75 Ω, unbalanced S/N ratio VBS/SDI output(option: HKDW-702) 54 dB (typical) BNC type x 1, 75 Ω/VBS out: 1.0 Vp-p/SDI out: 0.8 Vp-p Modulation depth at 27.5MHz HD-SDI output 45% +10/-5% BNC type x 1, 0.8 Vp-p, 75 Ω, unbalanced Horizontal resolution Audio output 1000 TV lines XLR-5-pin type x 1 (Male), 0 dBm Shutter speed Time code output 1/100, 1/125, 1/250, 1/500, 1/1000, 1/2000 (s) 1/60, 1/125, 1/250, BNC type x 1, 1.0 Vp-p, 75 Ω 1/500, 1/1000, 1/2000 (s) Earphone (at 50i format) Mini-jack (x 2), 8 Ω, -∞ to –18 dBs variable 1/33, 1/50, 1/60, 1/100, 1/125, 1/250, 1/500, 1/1000, 1/2000 (s) Lens (at 25P format) 12-pin Clear Scan Remote 25Hz to 4700 Hz 8-pin Programable Gain Light -3, 0, 3, 6, 9, 12, 18, 24, 30, 36, 42 dB (select in camera setup menu 2-pin, DC 12 V, max. 50 W for L/M/H/TURBO) DC input Viewfinder XLR-4-pin type (Male), DC 11 V to 17 V CRT DC output 2.0-inch monochrome 4-pin (for wireless microphone receiver), DC 11 V to 17 V, maximum Controls current 0.1 A BRIGHT, CONTRAST, PEAKING controls / TALLY, ZEBRA, DISPLAY/ VTR section ASPECT switches Recording format Horizontal resolution HDCAM 500 TV lines (16:9, at center) Tape speed Microphone Approx.80.6 mm/s (at 50i/25P format) Ultra-directional stereo microphone (Detachable) Playback/Recording time Max. 48 min. with BCT-40HD Fast forward/rewind time Approx. 5 min. with BCT-40HD Recommended tape Sony HDCAM cassette BCT-22HD, BCT-40HD Digital video performance Sampling frequency Y: 74.25 MHz, PB/PR: 37.125 MHz Quantization 10 bits/sample (8 bits/sample for compression processing) Channel coding S-NRZI PR-IV Compression Coefficient recording system Error correction Reed-Solomon code Error concealment Adaptive three dimensional HDW-730S HDCAM Camcorder

The new HDW-730S camcorder sets a new standard in cost effective HD production, enabling you to produce HDCAM quality pictures at a Digital BETACAM price point. The HDW-730S captures 1920 x 1080 high deﬁ nition pictures to the widely accepted HDCAM format. The HDW-730 provides switchable 50i/60i operation, giving the ﬂ exibility to shoot for either PAL or NTSC based HD production. • 1920 x 1080, 2.2 Million Pixel IT CCD • 10-bit A/D Converter & Advanced Digital Signal Processor 2 x HD SDI Output standard • Optional Down-Converter board for SD SDI output (HKDW-702) • Optional GPS receiving unit for recording GPS information as Metadata (HKDW-704) HDW-730S shown with optional lens, WRR-855 wireless microphone receiver and battery. • Compact and lightweight – only 5.4kgs • Intuitive menu system for easy in camera adjustments • Extensive audio features: slot in wireless mic, 2 headphone outputs, stereo front microphone, 4 channel audio recording capabilities.

Sony HD Product Guide CAMCORDERS - HDCAM 9

Speciﬁcations (HDW-730S)

General Mass Audio performance (Playback with standard HDW- Approx. 3.7 kg (8 lb 3 oz): Main Body Approx. 5.4 kg (11 lb 14 oz) (with 500/F500/M2000/M2100) MIC, VF, BCT-40HD, BP-L60A) Frequency response Dimensions (WxHxD) 20 Hz to 20 kHz, + 0.5 dB/-1.0 dB 127 x 206 x 308 mm (5 x 8 1/8 x 12 1/4 inch) Dynamic range Power requirement More than 85 dB (emphasis ON) DC 12V + 5.0 V/-1.0 V Distortion(at 1kHz, emphasis ON, reference level) Power consumption Less than 0.08% 33 W (with 12 V power supply, REC mode, without VF) Cross talk(at 1kHz, reference level) Operating temperature Less than -70 dB 0 °C to +40 °C (+32 °F to +104 °F) Wow & flutter Storage temperature Below measurable limit -20 °C to +60 °C (-4 °F to +140 °F) Operating humidity Camera section (Performance) 25% to 80% (Relative humidity) Pickup device Continuous operating time 3-chip 2/3-inch type IT CCD 3-chip Approx. 110 min with BP-L60A, Approx. 130 min with BP-L90A Effective Picture elements 1920 (H) x 1080 (V) Inputs/outputs connectors Optical system Genlock video input F1.4 prism (Equipped with Quarz Filter) BNC type x 1, 1.0 Vp-p, 75 Ω Lens mount Time code input Special bayonet mount CAMCORDERS - HDCAM BNC type x 1, 0.5 V to 18 Vp-p, 10 kΩ Built-in filters Audio CH1/CH2 input ND 1: Clear, 2: 5600K + 1/8ND, 3: 5600K, 4: 5600K + 1/64ND XLR-3-pin type x 2 (Female), -60 dBu/+4 dBu selectable, high imped- Sensitivity (2000 lux, 89.9% reflectance) ance, balanced (0 dBu = 0.775 Vrms) F10.0 (typical) Equivalent to ISO 600 or more Mic input (Stereo) Minimum illumination XLR-5-pin type x 1 (Female), -60 dBu Approx. 0.3 lx (F1.4 lens, +42 dB turbo gain) Test output Smear level BNC type x 1, 1.0 Vp-p, 75 Ω, unbalanced -125 dB VBS/SDI output(option: HKDW-702) S/N ratio BNC type x 1, 75 Ω/VBS out: 1.0 Vp-p/SDI out: 0.8 Vp-p 54 dB (typical) HD-SDI output Modulation depth at 27.5MHz BNC type x 1, 0.8 Vp-p, 75 Ω, unbalanced 45% +10/-5% Audio output Horizontal resolution XLR-5-pin type x 1 (Male), 0 dBm 1000 TV lines Time code output Shutter speed BNC type x 1, 1.0 Vp-p, 75 Ω 1/100, 1/125, 1/250, 1/500, 1/1000, 1/2000 (s) (at 59.94i format) Earphone 1/60, 1/125, 1/250, 1/500, 1/1000, 1/2000 (s) (at 50i format) Mini-jack (x 2), 8 Ω, -∞ to –18 dBs variable Clear Scan Lens 60 Hz to 4300 Hz (at 59.94i format) 12-pin 50Hz to 4700 Hz (at 50i format) Remote Programable Gain 8-pin -3, 0, 3, 6, 9, 12, 18, 24, 30, 36, 42 dB (select in camera setup menu Light for L/M/H/TURBO) 2-pin, DC 12 V, max. 50 W DC input Viewfinder XLR-4-pin type (Male), DC 11 V to 17 V CRT DC output 2.0-inch monochrome 4-pin (for wireless microphone receiver), DC 11 V to 17 V, maximum Controls current 0.1 A BRIGHT, CONTRAST, PEAKING controls / TALLY, ZEBRA, DISPLAY/ ASPECT switches VTR section Horizontal resolution Recording format 500 TV lines (16:9, at center) HDCAM Microphone Tape speed Ultra-directional monaural microphone (Detachable) Approx.80.6 mm/s (at 50i format) Approx. 96.7 mm/s (at 59.94i format) Playback/Recording time Max. 48 min. with BCT-40HD (at 50i format) Max. 40 min. with BCT-40HD (at 59.94i format) Fast forward/rewind time Approx. 5 min. with BCT-40HD Recommended tape Sony HDCAM cassette BCT-22HD, BCT-40HD Digital video performance Sampling frequency Y: 74.25 MHz, PB/PR: 37.125 MHz Quantization 10 bits/sample (8 bits/sample for compression processing) Channel coding S-NRZI PR-IV Compression Coefficient recording system Error correction Reed-Solomon code Error concealment Adaptive three dimensional Sony HD Product Guide CAMCORDERS - XDCAM HD 11

CAMCORDERS - XDCAM HD

PDW-F350...... 12 PDW-F330...... 14 CAMCORDERS - XDCAM HD CAMCORDERS - XDCAM HD PDW-F350 XDCAM HD Camcorder

The latest addition to Sony’s HD camcorder range is a highly versatile and cost effective production tool. It offers multi-frame CineAlta recording (23.98P, 25P, 29.97P, 50i or 59.94i) as well as what is commonly known as “overcranking” and “undercranking” (Slow & Quick Motion). Other key features include: • Three 1/2-inch-type CCDs • Slow and quick motion- • 4P to 60P (for HD 23.98P and 29.97P play back modes) • 4P to 50P (for HD 25P playback mode) • Switchable recording between MPEG HD or DVCAM formats • Four-channel audio recording • 16:9, 3.5-inch (viewable area measured diagonally) type colour LCD display • Built-in optical ND ﬁlter (four positions) • Slow shutter (up to 64-frame accumulations) • Interval recording function for time lapse recording • Includes a high quality 16:9 2” B/W viewﬁnder

PDW-F350 shown with optional lens and battery

Supplied Accessories Optional Accessories - continued DXF-20WCE Viewﬁnder (1) BC-M150 Battery Charger Stereo microphone with wind screen(1) BC-L500 Battery Charger Lens mount cap (1) AC-DN10 AC Adaptor Shoulder belt (1) RM-B150 Remote Control Unit VCT-U14 Tripod Adaptor (1) RM-B750 Remote Control Unit Flange focal length adjustment test chart (1) CA-WR855 Camera Adaptor for WRR-855A/855B RM-F300 IR remote commander (1) WRR-855A/855B Wireless Microphone Receiver Operation manual (CD-ROM x1, Paper x1) WRR-862A/862B Wireless Microphone Receiver PDZ-1 proxy browsing software (CD-ROM, x1) LC-300H Carrying Case (Hard) Professional Disc (PFD23, x1) LC-DS300SFT Carrying Case (Soft) LCR-1 Rain Cover Optional Accessories MSH-128 Memory Stick PFD23 Professional Disc LO-32BMT 2/3-inch Lens Mount Adaptor Related Products BP-GL95/GL65 Lithium-ion Battery Pack DXF-51 5-inch type B/W Viewﬁnder PDW-F70 XDCAM HD Recorder (p100) ECM-674/678 Shotgun-type Electret Condenser Microphone LO-32BMT 2/3” lens adaptor BP-L60S Lithium-ion Battery Pack BC-L70 Battery Charger

Sony HD Product Guide CAMCORDERS - XDCAM HD 13

Speciﬁcations (PDW-F350)

General Dynamic range Mass More than 85 dB Approx. 3.85 kg (body) Distortion Approx. 6.8kg (with VF, Mic, Disc, BP-GL95 battery, VCL-719BXS AF Less than 0.08% (at 1 kHz, reference level) Lens) Crosstalk Power requirements Less than -70 dB (at 1 kHz, reference level) DC 12 V +5.0 V/-1.0 V Head room Power consumption 20 dB (ex-factory setting) Approx. 32 W (while recording, with viewfinder, colour LCD ON, Camera section manual lens) Pickup device Operating temperature 3-chip 1/2-inch type HD Power HAD CCD -5 to 40 °C Effective picture elements Storage temperature Approx. 1.56 Mega Pixels (1,440 x 1,080) -20 to +60 °C Optical system Humidity F1.4 prism 10 to 90% (relative humidity) Built-in optical filters Continuous operating time 1 : Clear, 2: 1/4ND, 3: 1/16ND, 4: 1/64ND Approx. 160 min. w/BP-GL95 battery Shutter speed Recording format 59.94i 1/100, 1/125, 1/250, 1/500 ,1/1000, 1/2000, ECS, SLS Video DVCAM (25 Mb/s) 29.97p 1/40, 1/60, 1/120, 1/125, 1/250, 1/500, 1/1000, 1/2000, ECS, MPEG HD (MPEG-2 MP@HL) SLS HQ mode (VBR, maximum bitrate : 35Mb/s) 23.976p 1/32, 1/48, 1/96, 1/125, 1/250, 1/500, 1/1000, 1/2000, ECS SP mode (CBR 25Mb/s) 50i 1/60, 1/125, 1/250, 1/500, 1/1000, 1/2000, ECS, SLS LP mode (VBR, maximum bitrate : 18Mb/s) 25p 1/33, 1/50, 1/100, 1/125, 1/250, 1/500, 1/1000, 1/2000, ECS, SLS Proxy Video MPEG-4 Slow Shutter (SLS) Audio MPEG HD: 4ch or 2ch, 16 bits/48 kHz 1 to 8, 16, 32, and 64 frame accumulation DVCAM: 4ch, 16 bits/48 kHz Slow & Quick motion function (* MPEG HD mode only) Proxy Audio: A-law (4ch / 2ch, 8bit, 8kHz) 23.976p/29.97p Selectable from 4 to 60 frame/sec as recording frame CAMCORDERS - XDCAM HD Recording/Playback time rate ---- DVCAM approx. 85 min. 25p Selectable from 4 to 50 frame/sec as recording frame rate ---- MPEG HD Lens mount HQ mode SONY 1/2-inch type bayonet mount Audio 2ch : more than 68 min. Sensitivity Audio 4ch : more than 65 min. (2000 lx, 89.9% reflectance) F9 (typical) SP mode Minimum illumination Audio 2ch : approx. 90 min. Approx. 0.004lx (F1.4 lens, +48 dB turbo gain, with 64 flame accumu- Audio 4ch : approx. 85min. lation) LP mode Gain selection Audio 2ch : more than 122 min. -3, 0, 3, 6, 9, 12, 18, 24, 30, 36, 42, 48 dB Audio 4ch : more than 112 min. Smear level Signal inputs -120 dB (typical) Genlock video S/N ratio BNC x 1, 1.0 Vp-p, 75Ω 54 dB (typical, HD output) Audio input Modulation depth at 21 MHz XLR-3pin (Female) x2, line / mic / mic+48V selectable 45% (typical) Mic input Geometric distortion XLR-5-pin (Female, stereo) x1 Below measurable level (w/o lens) Signal outputs Viewfinder HD-SDI output CRT BNC x1, SMPTE 292M (w/ embedded audio, MPEG HD only) 2.0-inch type monochrome Component(HD/SD analogue) Video output Indicators --- REC (x2), TALLY, BATT, SHUTTER, GAIN UP Composite Video output Microphone BNC x1, 1.0 Vp-p, 75 Ω Black electret condenser, stereo microphone (detachable) Earphone Built-in LCD monitor Mini-jack x1 (stereo) 3.5-inch type colour LCD monitor Audio output (CH-1/CH-2) XLR-5-pin (Male, stereo) x1 Other inputs/outputs Time code input BNC x1, 0.5 to 18 Vp-p, 10 kΩ Time code output BNC x1, 1.0 Vp-p, 75 Ω Lens 12-pin Remote 8-pin Light 2-pin, DC 12 V, max. 50 W DC input XLR-4-pin (Male) x1 DC output 4-pin (for wireless microphone receiver), DC 12 V (MAX 0.2A) i.LINK IEEE 1394, 6-pin x1, AV/C (DV stream output) or File Access Mode Audio performance Frequency response 20 Hz to 20 kHz, +0.5 dB/-1.0 dB PDW-F330 XDCAM HD Camcorder

The PDW-F330 XDCAM ™ HD camcorder offers a choice of 60i/50i or true 24P/25P/30P recording with over 2 hours of recording time on Professional Disc™ media. Other features include HD recording in 1080/59.94i, 50i, 29.97P, 25P and native 23.98P and the operator can also select the desired bit rate to record in, either 35, 25 or 18 Mb/s depending on the desired picture quality and recording length. Being a dual format camcorder, it can also record in SD mode at 25 Mb/s (DVCAM™).

• Three 1/2-inch-type CCDs • Equipped with a lens connector (a 2/3-inch-type lens can be used via the optional lens adaptor*) • Switchable recording between MPEG HD or DVCAM formats • Four-channel audio recording • 16:9, 3.5-inch (viewable area measured diagonally) type colour LCD display • Built-in optical ND ﬁlter (four positions) • Slow shutter (up to 64-frame accumulations) • Interval recording function for time lapse recording • Auto focus function (compatible optional lens is required)

PDW-F330K shown with optional battery

Supplied Accessories Optional Accessories - continued VCL-719BXS AF Lens (x1, PDW-F330K only) BP-L60S Lithium-ion Battery Pack DXF-801 Viewfinder (x1) BC-L70 Battery Charger Stereo microphone with wind screen(x1) Optional Accessories - continued Lens mount cap (x1) BC-M150 Battery Charger Shoulder belt (x1) BC-L500 Battery Charger VCT-U14 Tripod Adaptor (x1) AC-DN10 AC Adaptor Flange focal length adjustment test chart (x1) RM-B150 Remote Control Unit RM-F300 IR remote commander RM-B750 Remote Control Unit Operation manual (CD-ROM x1, Paper x1) CA-WR855 Camera Adaptor for WRR-855A/855B PDZ-1 proxy browsing software (CD-ROM, x1) WRR-855A/855B Wireless Microphone Receiver Professional Disc (PFD23, x1) WRR-862A/862B Wireless Microphone Receiver LC-300H Carrying Case (Hard) Optional Accessories LC-DS300SFT Carrying Case (Soft) DXF-20WCE 16:9 B/W viewfinder LCR-1 Rain Cover PFD23 Professional Disc MSH-128 Memory Stick LO-32BMT 2/3-inch Lens Mount Adaptor BP-GL95/GL65 Lithium-ion Battery Pack Related Products DXF-51 5-inch type B/W Viewfinder ECM-674/678 Shotgun-type Electret PDW-F70 XDCAM HD Recorder (p100) Condenser Microphone LO-32BMT 2/3” lens adaptor

Sony HD Product Guide CAMCORDERS - XDCAM HD 15

Speciﬁcations (PDW-F330)

General Distortion Mass Less than 0.08% (at 1 kHz, reference level) Approx. 3.8 kg (body) Crosstalk Approx. 6.8kg (with VF, Mic, Disc, BP-GL95 battery, VCL-719BXS AF Less than -70 dB (at 1 kHz, reference level) Lens) Head room Power requirements 20 dB (ex-factory setting) DC 12 V +5.0 V/-1.0 V Camera section Power consumption Pickup device PDW-F330L (with manual focus lens) : Approx. 30W 3-chip 1/2-inch type HD Power HAD CCD PDW-F330K (auto focus : ON) : Approx. 31 W (while recording, with Effective picture elements viewfinder, colour LCD ON) Approx. 1.56 Mega Pixels (1,440 x 1,080) Operating temperature Optical system -5 to 40 °C F1.4 prism Storage temperature Built-in optical filters -20 to +60 °C 1 : Clear, 2: 1/4ND, 3: 1/16ND, 4: 1/64ND Humidity Shutter speed 10 to 90% (relative humidity) 59.94i 1/100, 1/125, 1/250, 1/500 ,1/1000, 1/2000, ECS, SLS Continuous operating time 29.97p 1/40, 1/60, 1/120, 1/125, 1/250, 1/500, 1/1000, 1/2000, ECS, Approx. 160 min. w/BP-GL95 battery SLS Recording format 23.976p 1/32, 1/48, 1/96, 1/125, 1/250, 1/500, 1/1000, 1/2000, ECS Video DVCAM (25 Mb/s) 50i 1/60, 1/125, 1/250, 1/500, 1/1000, 1/2000, ECS, SLS MPEG HD (MPEG-2 MP@HL) 25p 1/33, 1/50, 1/100, 1/125, 1/250, 1/500, 1/1000, 1/2000, ECS, SLS HQ mode (VBR, maximum bitrate : 35Mb/s) Slow Shutter (SLS) SP mode (CBR 25Mb/s) 1 to 8, 16, 32, and 64 frame accumulation LP mode (VBR, maximum bitrate : 18Mb/s) Slow & Quick motion function (* MPEG HD mode only) Proxy Video MPEG-4 Only available on PDW-F350 Audio MPEG HD: 4ch or 2ch, 16 bits/48 kHz Lens mount DVCAM: 4ch, 16 bits/48 kHz SONY 1/2-inch type bayonet mount CAMCORDERS - XDCAM HD Proxy Audio: A-law (4ch / 2ch, 8bit, 8kHz) Sensitivity Recording/Playback time (2000 lx, 89.9% reflectance) F9 (typical) DVCAM approx. 85 min. Minimum illumination MPEG HD Approx. 0.004lx (F1.4 lens, +48 dB turbo gain, with 64 flame accumu- HQ mode lation) Audio 2ch : more than 68 min. Gain selection Audio 4ch : more than 65 min. -3, 0, 3, 6, 9, 12, 18, 24, 30, 36, 42, 48 dB SP mode Smear level Audio 2ch : approx. 90 min. -120 dB (typical) Audio 4ch : approx. 85min. S/N ratio LP mode 54 dB (typical, HD output) Audio 2ch : more than 122 min. Modulation depth at 21 MHz Audio 4ch : more than 112 min. 45% (typical) Signal inputs Geometric distortion Genlock video Below measurable level (w/o lens) BNC x 1, 1.0 Vp-p, 75Ω Viewfinder Audio input CRT XLR-3pin (Female) x2, line / mic / mic+48V selectable 1.5-inch type monochrome Mic input Indicators XLR-5-pin (Female, stereo) x1 REC (x2), TALLY, BATT, SHUTTER, GAIN UP Signal outputs Microphone Component(HD/SD Analogue) Video output Black electret condenser, stereo microphone (detachable) BNC x3, Y/Pb/Pr, 1.0 Vp-p, 75 Ω Built-in LCD monitor Composite Video output 3.5-inch type colour LCD monitor BNC x1, 1.0 Vp-p, 75 Ω Earphone Mini-jack x1 (stereo) Audio output (CH-1/CH-2) Pin-jacks x2, -10dBu, 47kΩ Other inputs/outputs Time code input / output BNC x1(input or output, selectable) Lens 12-pin Remote 8-pin Light 2-pin, DC 12 V, max. 50 W DC input XLR-4-pin (Male) x1 DC output 4-pin (for wireless microphone receiver), DC 12 V (MAX 0.2A) i.LINK IEEE 1394, 6-pin x1, AV/C (DV stream output) or File Access Mode Audio performance Frequency response 20 Hz to 20 kHz, +0.5 dB/-1.0 dB Dynamic range More than 85 dB Sony HD Product Guide CAMCORDERS - HDV 17

CAMCORDERS - HDV

HVR-Z1P...... 18 HVR-A1P...... 20 CAMCORDERS - HDV CAMCORDERS - HDV HVR-Z1P HDV Camcorder

The HVR-Z1P camcorder forms the core of an entry- level HDV acquisition solution. Its designed to provide video professionals with a flexible and affordable migration from standard definition infrastructure to the rapidly expanding world of High Definition. The HVR-Z1P 1080i HDV camcorder can capture HDV, DVCAM and DV images at 60i, 50i, 30, 25 or 24 frames per second, in either SD or HD. • 3 x 1/3” 1080i Super HAD CCDs (16:9) • 14 bit HD DXP (Digital Extended Processor) • Carl Zeiss™ Vario-Sonnar “T” lens • 3.5” LCD panel (16:9) • Large viewfinder (16:9) • 2ch Audio XLR Inputs and phantom power • 2ch Independent Audio Rec Level Control • Audio Monitoring Select • Sensitivity Select on Built-in Microphone • Time code preset/reset/regen • HDV / DVCAM / DV sp Switchable • Built-in down-converter to take HDV images to Standard Definition

Supplied Accessories Optional Accessories - continued AC-VQ850 AC adaptor/charger (1) LCR-FXA Rain Jacket Power cord (1) LCH-FXA Hard Carrying Case Connecting cord (1) VMC-IL4408A/IL4415/IL4435 i.LINK Cable (4-pin to Lens hood (1) 4-pin) Large eyecup (1) VMC-IL4615/IL4635 i.LINK Cable (4-pin to 6-pin) RMT-841 wireless Remote Commander (1) PHDVM-63DM Mini Cassette A/V connecting cable (1) UWP-C1 UHF Synthesized Wireless Microphone Component video cable (1) Package Shoe adaptor (1) NP-F570 InfoLITHIUM rechargeable battery pack (1) Related Products size AA (R6) batteries (2) Cleaning cassette (1) HVR-M25P HDV Recorder (p106) Shoulder strap (1) Operating instructions (1)

Optional Accessories NP-F570/F770/F970 InfoLITHIUM Rechargeable Battery Packs 2NP-F970 InfoLITHIUM Rechargeable Battery Pack HVR-M15P HDV Recorder (p108) VCL-HG0872 Wide Conversion Lens VF-72CPK PL Filter Kit HVL-20DW2 Battery Video Light VCT-FXA Shoulder Brace LCS-VCB Soft Carrying Case

Sony HD Product Guide CAMCORDERS - HDV 19

Speciﬁcations (HVR-Z1P)

Camera section Lens Carl Zeiss Vario-Sonnar T* zoom lens, 12x (optical), f = 4. 5 to 54 mm, f = 32.5 to 390 mm* at 16:9 mode, f = 40 to 480 mm* at 4:3 mode, F = 1.6 to 2.8, filter diameter: 72 mm Built-in filter 1/6 ND, 1/32 ND Focus Auto, manual (focus ring/infinity position), one push auto Imaging device 3-chip 1/3-inch type CCDs Picture elements Approx. 1,070,000 pixels (effective), approx. 1,120,000 pixels (total) White balance Auto, one-push auto, indoor (3200 K), outdoor (5800 K ±7 steps) Shutter speed 1/3, 1/6, 1/12, 1/25, 1/50, 1/60, 1/100, 1/120, 1/150, 1/215, 1/300, 1/425, 1/600, 1/1000, 1/1250, 1/1750, 1/2500, 1/3500, 1/6000, 1/10000 s Exposure Auto, manual Gain 0, 3, 6, 9, 12, 15, 18 dB (adjustable for H, M and L gain positions) Minimum illumination 3 lx with F1.6 at 18 dB VTR section Recording format

1080/60i, 1080/50i, 480/60i (NTSC), 576/50i (PAL) CAMCORDERS - HDV Play out/Down conversion format 1080/60i, 1080/50i, 480/60i (NTSC), 576/50i (PAL), 480/60p, 576/50p Tape speed HDV/DV SP Max. 18.812 mm/s with PHDVM-63DM cassette DVCAM Max. 28.218 mm/s with PHDVM-63DM cassette Playback/Recording time HDV/DV SP Max. 63 min with PHDVM-63DM cassette DVCAM Max. 41 min with PHDVM-63DM cassette Fast forward/Rewind time Approx. 2 min 40 s with PHDVM-63DM cassette Input/Output connectors Audio/Video input/output AUDIO/VIDEO jack x1 Video signal: 1 Vp-p, 75 Ω unbalanced, sync negative Audio signal: 327 mV (at load impedance 47 kΩ), input impedance more than 47 kΩ, output impedance less than 2.2 kΩ S-video input/output Mini-DIN 4-pin x 1 Y: 1 Vp-p, 75 Ω unbalanced, sync negative C: 0.286 Vp-p (NTSC), 0.3 Vp-p (PAL), 75 Ω unbalanced Component video output COMPONENT OUTPUT jack Y: 1 Vp-p (0.3 V, sync negative) Pr/Pb (Cr/Cb): 525 mVp-p (75% colour bar), input impedance 75 Ω i.LINK 4-pin XLR audio input XLR 3-pin female x 2, 327 mV, -60 dBu: 3 kΩ, +40 dBu: 10.8 kΩ, power supply: approx. 40 V Headphone Stereo minijack (φ3.5 mm) LANC Stereo mini-minijack (φ2.5 mm) Built-in input/output devices LCD viewfinder 0.44-inch type, approx. 252,000 pixels (1120 x 225), hybrid type LCD monitor 3.5-inch type, approx. 250,000 pixels (1120 x 224), hybrid type Microphone Stereo type, noise reduction on/off General Mass Approx. 2.1 kg (camcorder only) Power requirements DC 7.2 V (battery pack) Power consumption Approx. 8.0 W (recording mode with LCD viewfinder on) Approx. 7.6 W (recording mode with LCD viewfinder on) Operating temperature 0 to 40 °C Storage temperature -20 to +60 °C (-4 to 140 °K) HVR-A1P HDV Camcorder

The picture quality and basic functions of the HVRA1P compliments the highly acclaimed HVRZ1P. Combined with newly developed 1/3-inch type 3 mega pixels primary colour single CMOS sensor, which Sony developed uniquely alongside newly developed image processing IC (EIP-Enhanced Imaging Processor) technology has allowed the HVRA1P to become the smallest professional HD camcorder, but still realise high quality pictures for the professional. • 1/3” 3 Mega Pixel CMOS Sensor with Enhanced Image Processor • Switchable Recording and playback- HDV 1080i/ DVCAM/DV • Long Recording Time • Real-time HD Codec Engine • 10x Optical • 2-channel XLR Audio Input and Phantom power • Carl Zeiss Vario-Sonnar T* Lens • 2.8 Mega Pixel still image capturing on Memory Stick and Tape (1.2MP) • Manual Zoom and Manual Focus Ring • Expanded Focus / Peaking / Zebra Pattern • Shot Transition

Supplied Accessories Optional Accessories - continued AC-L15 AC adaptor (1) VCL-HG2037Y 2.0x Tele Conversion Lens Power cord (1) VCL-HG0737Y 0.7x Wide Conversion Lens NP-FM50 InfoLITHIUM rechargeable battery pack (1) LCH-HCE Hard Carrying Case Lens hood with lens cover (1) RM-1BP LANC Remote Controller RMT-831 wireless Remote Commander unit (1) PHDVM-63DM Digital Master Mini Cassette Tape A/V connecting cable with S video (1) Component video cable (1) Related Products USB cable, Memory Stick Duo (16 MB) (1) Memory Stick Duo adaptor (1) HVR-M25P HDV Recorder (p106) ECM-NV1 monaural electret condenser mic. (1) XLR audio adaptor (1) Shoulder strap (1) Operating instructions (1)

Optional Accessories NP-QM71D/QM91D*InfoLITHIUM Rechargeable HVR-M15P HDV Recorder (p108) Battery Pack 2NP-QM91D/B* InfoLITHIUM Rechargeable Battery Pack (NP-QM91D x 2) UWP-C1UHF Synthesized Wireless Microphone Package

Sony HD Product Guide CAMCORDERS - HDV 21

Speciﬁcations (HVR-A1P)

Camera Section Power requirements Lens DC 7.2 V (battery pack), DC 8.4 V (AC adaptor) Carl Zeiss Vario-Sonnar T* zoom lens, 10x (optical), Power consumption f = 5.1 to 51 mm HDV Approx. 5.6 W (recording mode with LCD viewfinder on) f = 40 to 400 mm in 16:9 mode and 49.3 to 493 mm in 4:3 mode (full DV/DVCAM Approx. 5.1 W (recording mode with LCD viewfinder on) scan mode on)* Operating temperature f = 41 to 480 mm in 16:9 mode and 50 to 590 mm in 4:3 mode (full 0 to 40 °C scan mode off)* Storage temperature f = 40 to 400 mm in 16:9 mode and 37 to 370 mm in 4:3 mode (still -20 to +60 °C picture mode)* f = 1.8 to 2.1, filter diameter: 37 mm Focus Auto, manual, spot focus (touch panel control) Imaging device 1-chip, 1/3-inch type primary colour CMOS sensor Picture elements Approx. 2,969,000 pixels (total) Shutter speed 1/3, 1/6, 1/12, 1/25, 1/50, 1/60, 1/100, 1/120, 1/150, 1/215, 1/300, 1/425, 1/600, 1/1000, 1/1250, 1/1750, 1/2500, 1/3500, 1/6000, 1/10000 s Minimum illumination 7 lx with F1.8 VTR section Recording format 1080/50i, 576/50i Play out/Down conversion format

1080/50i, 576/50i, 576/50P CAMCORDERS - HDV Tape speed HDV/DV Max. 18.812 mm/s with PHDVM-63DM cassette DVCAM Max. 28.218 mm/s with PHDVM-63DM cassette Playback/Recording time HDV/DV Max. 63 min with PHDVM-63DM cassette DVCAM Max. 41 min with PHDVM-63DM cassette Fast forward/Rewind time Approx. 2 min 40 s with PHDVM-63DM cassette (using a fully charged battery) Approx. 1 min 45 s with PHDVM-63DM cassette (using an AC adaptor) Input/Output connectors Audio/Video input/output A/V OUT jack, 10-pin connector Composite video: 1 Vp-p, 75 Ω unbalanced, sync negative Y: 1 Vp-p, 75 Ω unbalanced, sync negative C: 0.3 Vp-p, 75 Ω unbalanced Audio: 327 mV, input impedance more than 47 kΩ, output impedance less than 2.2 kΩ Component video output COMPONENT OUT jack Y: 1 Vp-p (0.3 V, sync negative), 75 Ω unbalanced Pr/Pb (Cr/Cb): 525 mVp-p (75% colour bar) HDV/DV input/output i.LINK interface (IEEE 1394, 4-pin connector S100) XLR audio input XLR 3-pin female x 2, 327 mV, -60 dBu: 3 kΩ, +40 dBu: 10.8 kΩ, power supply: approx. 48 V Headphone Stereo minijack (φ3.5 mm) x 1 MIC Minijack x 1, 0.388 mV, low impedance with DC 2.5 to 3.0 V, output impedance 6.8 kΩ (φ3.5 mm), stereo type LANC Stereo mini-minijack (φ2.5 mm) x 1 USB Mini-B x 1 Built-in input/output devices LCD viewﬁnder 0.44-inch type, approx. 252,000 (1120 x 225) pixels , hybrid type, 16:9 aspect ratio LCD monitor 2.7-inch type, approx. 123,200 (560 x 220) pixels, hybrid type, 16:9 aspect ratio Microphone Stereo type, noise reduction on/off Speaker φ16 mm General Mass Approx. 670 g (camcorder only) Sony HD Product Guide CAMCORDERS - ACCESSORIES 23

CAMCORDERS - ACCESSORIES

ACDN2B...... 24 ACDN10...... 24 BKWL401...... 24 BPGL95/GL65...... 25 BPL60S...... 25 BCM150...... 26 BCL70...... 26 CAC12...... 27 CAWR855...... 27 ECM670...... 27 HKDW702...... 28 HKDW703...... 28 HKDW902R...... 28 HKDW905R...... 28 LCDS300SFT...... 29 LO32BMT...... 29 VCT14...... 29 VCTU14...... 29 WRRA855...... 30

WRR862A...... 31 ACCESSORIES CAMCORDERS - ACDN-2B AC Adaptor

The AC-DN2B is a 150 W (Max.) DC power supply with a V-mount mechanism for direct attachment to camcorders. • XLR-4-pin output for attachment to other equipment • Charging capability of Sony V-mount lithium-ion batteries (by 85% capacity) • BP-GL95/GL65/L60S/IL75/L40A/L90A/L60A

Speciﬁcations

Power requirements Mass Approx. AC 100 to 240 V, 50/60 Hz 950 g DC output Supplied accessories 16.7 V, 9 A Operation manual, AC power Operating temperature cord, DC cable 0 to +40 °C Dimensions (W x H x D) 101 x 169 x 70 mm

ACDN-10 AC Adaptor The AC-DN10 is a 100 W (Max.) DC power supply with a V-mount mechanism for direct attachment to compatible camcorders. • XLR-4-pin output for attachment to other equipment • Charging capability of Sony V-mount lithium-ion batteries (full charge) • BP-GL95/GL65/L60S/IL75/L40A/L90A/L60A • Quick charging • The BP-GL95 can be fully charged within 145 minutes • Can charge batteries while supplying AC power to other equipment

Speciﬁcations

Power requirements Mass Approx. AC 100 to 240 V, 50/60 Hz 850 g DC output Supplied accessories 16.8 V, 6 A Operation manual, AC power cord Operating temperature 0 to +45 °C Dimensions (W x H x D) 101 x 169 x 48 mm

BKW-L401 Viewﬁnder Rotation Bracket

The viewﬁnder rotation bracket for BC camcorders allows portable ENG style viewﬁnders to easily swing upwards and out of the way when required.

Sony HD Product Guide CAMCORDERS - ACCESSORIES 25

BP-GL95/BP-GL65 Rechargeable Lithium-ion Battery Pack The new BP-GL65 Graphite Lithium Ion battery represents the latest generation of Sony battery technology. Replacing the BP-L40, the BP-GL65 has around 25% greater power capacity, yet is around the same size, weight and cost of the BP-L40. The BP-GL65 can be used with all current Lithium Ion battery chargers • Large capacity and light weight • Sony V-Shoe mounting mechanisim • Info function • 8 step, 2 colour LED display Speciﬁcations

Capacity BP-GL65 shown BP-GL95: 95Wh BP-GL65: 65Wh Weight BP-GL95: 760g BP-GL65: 550g Approx charge time BP-GL95: 190 minutes BP-GL65: 190 minutes Maximum voltage DC 16.8V Nominal voltage DC 14.4V Operating temperature -10 to +45 Degrees Celcius CAMCORDERS - ACCESSORIES ACCESSORIES CAMCORDERS -

BPL-60S Hard Carbon Li-ion Battery

• 64.8 Wh capacity • V-mount attaching mechanism • Four-step LED display • Remaining capacity indication in 20% steps with green LED (more than 80%, 60%, 40%, 20%) Speciﬁcations

Battery Type Hard carbon type Lithium-ion battery Maximum voltage DC16.8V Nominal voltage DC 14.4V Capacity 65Wh Dimensions (W x H xD) 101 x 169 x 37.3mm Mass Approx. 700g BCM-150 4 Station Charger for Li-ion and NiMh Batteries

The BC-M150 is a 4 station charger for all Sony V-Shoe type professional Lithium Ion and Ni-MH battery packs. It features fast and efﬁcient charging, and advanced monitoring of battery status. • Simultaneous charging of Lithium Ion, Graphite Lithium Ion and Nickle Metal Hydride, ‘V-Shoe’ Type professional batteries • Quick charge capability • Built in LCD status display monitor • Individual channel charge status LED’s • Refresh function • 4 Pin DC output connector Speciﬁcations

Power requirements Dimensions (w/h/d) 100 to 240V, 50/60Hz 120 x 155 x 330mm Output Mass (Approx.) 16.8V DC, 6.0A (for charging the Li-ion & Info Li-ion battery pack) 3.5kg 19.5V DC, 5.0A (for charging the Ni-MH battery pack) Charge system Power consumption Constant voltage and current charge system with timer stop system Approx. 160W Charge control system Operating temperature Constant voltage and current charge control system 0°C to +40°C Input/output connector Storage temperature DC output XLR-4pin x 1 -20°C to +60°C RS-232C x 1 Operating/storage humidity 5% to 90% RH

BCL-70 Li-ion Battery Charger

The BCL-70 charges up to two lithium-ion battery packs simultaneously. • Compact and lightweight • Charge progress indicator • Also doubles as a 100 w DC power supply (16.7 V)

Speciﬁcations

Power requirements Dimensions (W x H x D) 100 to 240V, 50/60 Hz 134 x 237 x 60 mm (excluding projecting parts) Current drain Input/Output 168 VA or less Current Input (AC) Peak inrush current 140 VA 1.4 A at maximum (1) Power ON, current probe method: 15 A (100V)/ 35 A Voltage Output (DC) (240V) 16.8 V (2) Hot switching, inrush current measured in accord- Current Output ance with European standard EN55103-1: 12A (230V) 6 A at maximum Operating Temperature DC Output connector 0C to 45C XLR type 4-pin connector (16.7 V) Mass (Approx.) Battery Charging connector 1.2 kg Square-shaped 5-pin connector (16.8V, 5 A, 3A)

Sony HD Product Guide CAMCORDERS - ACCESSORIES 27

CAC-12 Microphone Holder

The CAC-12 is an optional microphone holder compatible with the majority of Sony’s range of broadcast on-shoulder camera range. • Pivoting mount allows mic position and direction to be easily adjusted • Rubber damping helps isolate transmission of camera noise

CA-WR855 Camera Adaptor for WRR-855 Wireless Receiver

Enables a WRR-855A/855B to be mounted on Sony camcorders with direct audio/power connection interfaces

Shown here with optional camcorder, CAMCORDERS - ACCESSORIES ACCESSORIES CAMCORDERS - WRR-855 transmitter and battery

ECM-670 Camera Shotgun Microphone 48v Short shotgun microphone for use on cameras. No battery operation, 48V phantom power only. • External power supply (DC 12 to 48V) • Suitable for mounting on Sony cameras and camcorders • Compact and light weight design • Super-cardioid microphone with minimum sensitivity to ambient noise HKDW-702 HD-SD Down-Converter The optional Down-Converter Board HKDW-702 enables Standard Deﬁnition output with four channel audio embedded. SD-SDI or analogue composite can be selected via camcorder’s set up menu.

HKDW-703 Picture Cache Board The optional HKDW-703 Picture Cache Board provides up to eight seconds (HDW-750CE) of loop recording using solid state memory. Thus, when the REC start button is pressed, everything that happened up to eight seconds before that moment can be recorded to tape. • Choice of recording for 0, 1, 2, 3, 4, 5, 6, or 8 seconds

HKDW-902R 2-3 Pull-down board with HD to SD Down-Converter

This option board, designed for use with the HDW-F900R offers 2-3 pull-down capability, HD-SD down- conversion (PAL/NTSC), and includes SD SDI and VBS outputs. • 2-3 pull-down for monitoring or recording 23.98P in 59.94i capable equipment • Down conversion from HD to SD in either PAL or NTSC • SD SDI and VBS outputs

HKDW-905R Image Inverter and Slow Shutter Board

This option board offers slow shutter and image inversion capability for the HDW-F900R. • Image inverter functionality for utilising Cine lenses on the HDW-F900R • Slow shutter function

Sony HD Product Guide CAMCORDERS - ACCESSORIES 29

LCDS-300SFT Soft Carry Case Direct pack with accessories attached: Battery pack, Microphone, Viewﬁnder and Zoom lens. Easy to pack a variety of accessories such as Battery charger and other items. Speciﬁcations Mass 3.5 kg Dimensions (w/h/d) 220 x 300 x 620 mm (without projection)

LO-32BMT Lens Adaptor The LO-32BMT is a lens adaptor that allows 2/3” lens to be used on 1/2” camcorders. This makes it ideal for use with Sony’s new range of XDCAM HD camcorders CAMCORDERS - ACCESSORIES ACCESSORIES CAMCORDERS -

VCT-14 Tripod Adaptor

Speciﬁcations Dimensions 282(W) x 27(H) x 80(D)mm Mass 900 g

VCT-U14 Tripod Adaptor

Speciﬁcations Dimensions 282 (W) x 27 (H) x 80 (D) mm Mass: Approx. 900 g WRR-855A(66) Wireless Microphone Receiver

The WRR-855A slot-in portable tuner can be easily installed into most Sony broadcast camcorders without audio and power cables, or a mounting adaptor. • Space Diversity Tuner for camcorder use • Easily mounts onto most Sony broadcast camcorders without need for audio/power cables or a mounting adaptor • Weatherproof structure • Powering from a Sony camcorder • Switchable RF muting (squelch); ON (10 dBµ) or OFF

Supplied Accessories Antennas (2)

Optional Accessories CAWR855 WRT822A UHF synthesised transmitter WRT8B UHF synthesised transmitter

Speciﬁcations

Receiving channels 1 channel Receiving frequencies 792 MHz to 806 MHz (A66, AU type) Crystal-controlled PLL synthesizer De-emphasis 50 µs Reference deviation ±5 kHz deviation at 1 kHz modulation (Maximum deviation: ±40 kHz deviation at 1 kHz modulation) Selectivity 60 dB or more at ±250 kHz Spurious rejection 80dB or more Frequency range 40 Hz to 18 kHz (typical) Signal-to-noise ratio 60 dB or more at 60 dBµ RF input at reference deviation, A-weighted RF muting (squelch) level 10 dBµ or OFF selectable Audio output level D-sub 15-pin (1), unbalanced Antenna connector BNC-R (2), 50 â126 (nominal) impedance Operating voltage External: DC 7V Current (power) consumption 200 mA or less at external DC 7V Dimensions (W x H x D) 88.0 x 119.0 x 31.3 mm Mass Approx. 280g Supplied accessories Antennas (2)

Sony HD Product Guide CAMCORDERS - ACCESSORIES 31

WRR-862A(66) Portable (ENG) Dual Diversity Receiver

The WRR-862A provides two-channel reception for ENG and EFP applications. Two space-diversity receiver modules are built in to its rugged, compact and extremely lightweight body that is made from diecast magnesium. This makes the WRR-862 especially suitable for mounting on to Sony professional camcorders with the supplied attachment kit/case, as well as a variety of other portable applications. • Dual Diversity Tuner • Compact, lightweight and easy camera mount • LED and LCD indication • Long operating time • Switchable RF squelch • Monitoring Function • BPL60 Bracket

Supplied Accessories Attachment case (1) Camera attachment kit (1) Antennas (2) Output cables (2)

DC cable (1) ACCESSORIES CAMCORDERS -

Optional Accessories WRT822A UHF synthesised transmitter WRT847A transmitter module WRT8B UHF synthesised transmitter

Speciﬁcations

Receiving frequencies Frequency response 2 frequencies within 792 MHz to 806 MHz 40 Hz to 18 kHz Type of reception Distortion Space diversity 1.0% or less (±40 kHz deviation at 1 kHz modulation) Circuit system AF output Dual conversion superheterodyne SMC9-4S (Sony 4-pin, x 2), 150 ½ (balanced) impedance Local oscillators Output level 1st: PLL synthesizer 2nd: Crystal oscillator -58 dBm (±5.0 kHz deviation at 1 kHz modulation) RF input terminal Monitor output BNC-R (x 2), 50 ohm (nominal) impedance 3.5 mm dia. mini jack (x 1, 5 mW), Tuner 1/2/mixed selectable System dynamic range Indicators 96 dB or more (101 dB typical) LCD displays Operating channel/frequency, AF output level, RF input Reference deviation level, battery status, and accumulated battery operating time. LED dis ±5 kHz deviation at 1 kHz modulation plays RF input level, diversity reception status, transmitter battery alarm Maximum deviation Power requirements ±40 kHz deviation at 1 kHz modulation Batteries: approx. 230 mA at DC 6 V. External: approx. 135 mA at Signal to noise ratio DC 12 V 60 dB or more (65 dB typical) at 60 dBµ RF input at reference deviation, Battery life A-weighted 5 hours or more (continuous operation with 4 Sony LR6 batteries at Selectivity 25°C) 60 dB or more at ±250 kHz Body construction RF squelch level Diecast magnesium (colour: dark gray) 5 dBµ, 10 dBµ, 15 dBµ or OFF Dimensions De-emphasis 89.0 x 120.0 x 29.5 mm 50 µs Mass Approx. 400 g (14.1 oz) including batteries Sony HD Product Guide CAMERAS - HD STUDIO 33

CAMERAS - HD STUDIO

HDC-1000...... 34 HDC-1500...... 36 HDC-1550...... 38 HDC-3300...... 40 HDC-X300...... 42 HDC-X310...... 44 BRC-H700...... 46 CAMERAS - HD STUDIO CAMERAS - HD STUDIO HDC-1000 Multi-Format HD Studio Camera

The HDC-1000 studio camera utilises advanced HD Digital Signal Processing with 14 bit A/D. The HDC- 1000 incorporates a newly developed CCD imager that creates images in either 1080/50 frame progressive or 1080/50 field interlace frame rates, depending on desired final system output. The new CCD and DSP LSI are two key devices that allow stunning image creation in a variety of scanning modes. • Memory Stick storage of camera setup parameters • Optical fiber digital transmission • Ergonomic design • State-of-the-art DSP LSI • Industry-first 14-bit A/D conversion (in a 1080P camera) • A wide variety of capturing modes - 1080/50i, 1080/60i, 1080/24P, 1080/25P, 1080/30P, 1080/50P, 1080/60P, 720/50P, 720/60P • Excellent signal-to-noise ratio of 54 dB • High-sensitivity of F10 • Newly developed three 2/3-inch type 2.2-megapixel HD progressive CCD • Servo-controlled ND and CC filters

Supplied Accessories Related Products Operation manual (1) Front cover (1) HDC-1500 Multi-format HD Portable Camera (p36) Number plate for side panel (2) Belt for cable clamp (2) Angle adjustment ﬁtting (2)

Optional Accessories HDCU1000 Camera Control Unit HDCU1500 Portable Camera Control Unit MSU-900 Master Setup Unit HDC-3300 HD Super Slo-Mo Camera (p40) MSU-950 Portable Master Setup Unit HKCU1001 SD Analogue Interface Unit HKCU1003 Multi Interface Unit HKCU1005 HD/SD Expansion Unit RM-B750 Remote Control Unit RCP-750 Remote Control Panel CNU-700 Camera Command Network Unit HDTX100 HD Triax Adaptor (Camera side) HDFX100 HD Triax Adaptor (HDCU side) HDCU-1000 Camera Control Unit (p52) HDVF-C750W LCD Colour Viewﬁnder for HDC1000 HDVF-700A CRT B/W Viewﬁnder for HDC1000 BKP-7911 Script Holder

Sony HD Product Guide CAMERAS - HD STUDIO 35

Speciﬁcations (HDC-1000)

General Mass Approx. 20 kg (44 lb 9 oz, without VF and lens) Operating temperature -20 to +45 °C (-4 to +113 °F) Camera Pickup device 3-CCD 2/3-inch type 16:9 Effective picture elements (H x V) 1920 x 1080 Spectrum system F1.4 prism system Built-in filters 1: Clear, 2: 1/4ND, 3: 1/8ND, 4: 1/16ND, 5: 1/64ND A: CROSS, B: 3200K, C: 4300K, D: 6300K, E: 8000K Servo filter control Yes Lens mount Sony hanger mount Sensitivity F10 at 2000 lx (3200K, 89.9% reflectance) Minimum illumination 10 lx (F1.4, +12 dB gain up) Signal-to-noise ratio 54 dB (typical) Horizontal resolution 1000 TV lines Dynamic range (1080/60i mode) 600% Registration Within 0.02% (all zones, without lens) Shutter speed selection 1/100, 1/125, 1/250, 1/500, 1/1000, 1/2000 s (1080/60i mode) 1/60, 1/125, 1/250, 1/500, 1/1000, 1/2000 s (1080/50i mode) Modulation depth 45% or more horizontally (800 TV lines at center, 27.5 MHz, with typi cal lens) CAMERAS - HD STUDIO Input connectors Audio in (CH-1) XLR-3-31 type (1, female), mic or line selectable Audio in (CH-2) XLR-3-31 type (1, female), AES/EBU or mic or line selectable Mic in (front) - Return control 6-pin (1) DC in XLR-4-pin type (1) Output connectors Test out BNC type (1), 1.0 Vp-p, 75 Ω HD SDI out BNC type (2) Earphone out - DC out 4-pin (1), 10.5 to 17 V max. 1.5 A AC utility out Yes (Output connector differs by region.) Input/output connectors CCU Optical fiber connector Lens 36-pin Viewfinder D-sub 25-pin Remote 8-pin Prompter BNC type (1), 1.0 Vp-p, 75 Ω Tracker 10-pin: Tracker R/T, R/G Tally, unregulated 12 V Crane 12-pin, Y/Pb/Pr, Trunk data I/O, Serial Data Intercom XLR-5-pin (2, female) HDC-1500 Multi-Format Portable HD Camera

The HDC-1500 portable camera incorporates a newly developed CCD imager and DSP LSI – two key devices that allow it to achieve ultimate picture performance in a variety of scanning modes. The new CCD can accommodate all existing interlace and progressive scan formats ranging from 1080/50i and 1080/60i to 1080/24P. • Compact and lightweight: approx. 4.5 kg • Servo-controlled ND and CC filters • Memory Stick storage of camera setup parameters • Optical fiber digital transmission • Ergonomic design • State-of-the-art DSP LSI • Industry-first 14-bit A/D conversion • High-sensitivity of F10 • A wide variety of capturing modes - 1080/50i, 1080/60i, 1080/24P, 1080/25P, 1080/30P, 1080/60P, 720/50P, 720/60P • Newly developed three 2/3-inch type 2.2-megapixel HD progressive CCD • Excellent signal-to-noise ratio of 54 dB • Versatile interfaces: two HD-SDI outputs, one digi- tally down-converted SD-SDI output

Supplied Accessories Related Products Operation manual (1) Lens cap (1) HDC-1000 Multi-format HD Studio Camera (p34) Label for assignable switch (1)

Optional Accessories HDCU1000 Camera Control Unit HDCU1500 Portable Camera Control Unit MSU-900 Master Setup Unit MSU-950 Portable Master Setup Unit HKCU1001 SD Analogue Interface Unit HDC-3300 HD Super Slo-Mo Camera (p40) HKCU1003 Multi Interface Unit HKCU1005 HD/SD Expansion Unit RM-B750 Remote Control Unit RCP-750 Remote Control Panel CNU-700 Camera Command Network Unit HDTX100 HD Triax Adaptor (Camera side) HDFX100 HD Triax Adaptor (HDCU side) HDVF-C750W LCD Colour Viewﬁnder for HDC1000 HDVF-700A CRT B/W Viewﬁnder for HDC1000 HDCU-1000 Camera Control Unit (p52) BKP-7911 Script Holder HDLA-1500 Large Lens Adapter

Sony HD Product Guide CAMERAS - HD STUDIO 37

Speciﬁcations (HDC-1500)

General Mass Approx. 4.5 kg (9 lb 14 oz, without VF and lens) Operating temperature -20 to +45 °C (-4 to +113 °F) Camera Pickup device 3-CCD 2/3-inch type 16:9 Effective picture elements (H x V) 1920 x 1080 Spectrum system F1.4 prism system Built-in filters 1: Clear, 2: 1/4ND, 3: 1/8ND, 4: 1/16ND, 5: 1/64ND A: CROSS, B: 3200K, C: 4300K, D: 6300K, E: 8000K Servo filter control Yes Lens mount Sony bayonet mount Sensitivity F10 at 2000 lx (3200K, 89.9% reflectance) Minimum illumination 10 lx (F1.4, +12 dB gain up) Signal-to-noise ratio 54 dB (typical) Horizontal resolution 1000 TV lines Dynamic range (1080/60i mode) 600% Registration Within 0.02% (all zones, without lens) Shutter speed selection 1/100, 1/125, 1/250, 1/500, 1/1000, 1/2000 s (1080/60i mode) 1/60, 1/125, 1/250, 1/500, 1/1000, 1/2000 s (1080/50i mode) Modulation depth 45% or more horizontally (800 TV lines at center, 27.5 MHz, with typi cal lens) CAMERAS - HD STUDIO Input connectors Audio in (CH-1) XLR-3-31 type (1, female), mic or line selectable Audio in (CH-2) XLR-3-31 type (1, female), AES/EBU or mic or line selectable Mic in (front) XLR-3-31 type (1, female) Return control 6-pin (1) DC in XLR-4-pin type (1) Output connectors Test out BNC type (1), 1.0 Vp-p, 75 Ω HD SDI out BNC type (2) Earphone out Mini-jack (1), 8 Ω DC out 4-pin (1), 10.5 to 17 V max. 1.5 A AC utility out Yes (Output connector differs by region.) Input/output connectors CCU Optical fiber connector Lens 12-pin Viewfinder 20-pin Remote 8-pin Prompter BNC type (1), 1.0 Vp-p, 75 Ω Tracker 10-pin: Tracker R/T, R/G Tally, unregulated 12 V Crane 12-pin, Y/Pb/Pr, Trunk data I/O, Serial Data Intercom XLR-5-pin (2, female) HDC-1550 Multi-Format Portable HD Camera (Triax Version)

The HDC-1550 portable camera incorporates a newly developed CCD imager and DSP LSI – two key devices that allow it to achieve ultimate picture performance in a variety of scanning modes. The new CCD can accommodate all existing interlace and progressive scan formats ranging from 1080/50i and 1080/60i to 1080/24P. • Compact and lightweight: approx. 4.5 kg • Servo-controlled ND and CC ﬁlters • Memory Stick storage of camera setup parameters • Triax transmission • Ergonomic design • State-of-the-art DSP LSI • Industry-ﬁrst 14-bit A/D conversion • High-sensitivity of F10 • A wide variety of capturing modes - 1080/50i, 1080/60i, 1080/24P, 1080/25P, 1080/30P, 1080/60P, 720/50P, 720/60P • Newly developed three 2/3-inch type 2.2-megapixel HD progressive CCD • Excellent signal-to-noise ratio of 54 dB • Versatile interfaces: two HD-SDI outputs, one digi- tally down-converted SD-SDI output

Supplied Accessories Related Products Operation manual (1) Lens cap (1) HDC-1000 Multi-format HD Studio Camera (p34) Label for assignable switch (1)

Optional Accessories HDCU1000 Camera Control Unit HDCU1500 Portable Camera Control Unit MSU-900 Master Setup Unit MSU-950 Portable Master Setup Unit HKCU1001 SD Analogue Interface Unit HDC-3300 HD Super Slo-Mo Camera (p40) HKCU1003 Multi Interface Unit HKCU1005 HD/SD Expansion Unit RM-B750 Remote Control Unit RCP-750 Remote Control Panel CNU-700 Camera Command Network Unit HDVF-C750W LCD Colour Viewﬁnder for HDC1000 HDVF-700A CRT B/W Viewﬁnder for HDC1000 BKP-7911 Script Holder HDLA-1500 Large Lens Adapter HDCU-1000 Camera Control Unit (p52)

Sony HD Product Guide CAMERAS - HD STUDIO 39

Speciﬁcations (HDC-1550)

General Mass Approx. 4.5 kg (9 lb 14 oz, without VF and lens) Operating temperature -20 to +45 °C (-4 to +113 °F) Camera Pickup device 3-CCD 2/3-inch type 16:9 Effective picture elements (H x V) 1920 x 1080 Spectrum system F1.4 prism system Built-in filters 1: Clear, 2: 1/4ND, 3: 1/8ND, 4: 1/16ND, 5: 1/64ND A: CROSS, B: 3200K, C: 4300K, D: 6300K, E: 8000K Servo filter control Yes Lens mount Sony bayonet mount Sensitivity F10 at 2000 lx (3200K, 89.9% reflectance) Minimum illumination 10 lx (F1.4, +12 dB gain up) Signal-to-noise ratio 54 dB (typical) Horizontal resolution 1000 TV lines Dynamic range (1080/60i mode) 600% Registration Within 0.02% (all zones, without lens) Shutter speed selection 1/100, 1/125, 1/250, 1/500, 1/1000, 1/2000 s (1080/60i mode) 1/60, 1/125, 1/250, 1/500, 1/1000, 1/2000 s (1080/50i mode) Modulation depth 45% or more horizontally (800 TV lines at center, 27.5 MHz, with typi cal lens) CAMERAS - HD STUDIO Input connectors Audio in (CH-1) XLR-3-31 type (1, female), mic or line selectable Audio in (CH-2) XLR-3-31 type (1, female), AES/EBU or mic or line selectable Mic in (front) XLR-3-31 type (1, female) Return control 6-pin (1) DC in XLR-4-pin type (1) Output connectors Test out BNC type (1), 1.0 Vp-p, 75 Ω HD SDI out BNC type (2) Earphone out Mini-jack (1), 8 Ω DC out 4-pin (1), 10.5 to 17 V max. 1.5 A AC utility out Yes (Output connector differs by region.) Input/output connectors CCU Triax connector Lens 12-pin Viewfinder 20-pin Remote 8-pin Prompter BNC type (1), 1.0 Vp-p, 75 Ω Tracker 10-pin: Tracker R/T, R/G Tally, unregulated 12 V Crane 12-pin, Y/Pb/Pr, Trunk data I/O, Serial Data Intercom XLR-5-pin (2, female) HDC-3300 Super Slo Mo Camera System

The new HDC-3300 Super Slo Mo Camera System provides 3 times image capture at full high deﬁnition resolution. The result being clearer and sharper slo mo images than ever before. Multi-format capture, 1920 x 1080 / 180i , 150i or 1280 x 720 / 180p, 150p Vertical spatial offsetting Separate digital signal processing Reduced power consumption at camera head 10 Gbps uncompressed RGB transmission from CHU to CCU High quality standard speed output Up to 2500m cable length

HDC-3300 shown with optional HDLA-1500 large lens adaptor, HD lens, viewﬁnder and pedestal

Supplied Accessories Related Products Operation manual (1) Lens cap (1) HDVF-C730W LCD Colour Viewﬁnder (p62)

Optional Accessories HDCU-3300 Camera Control Unit for HDC-3300 HDLA-1500 Large Lens Adaptor HKCU-1001 SD Analogue Interface Unit HKCU-1005 HD/SD Expansion Unit MSU-900 Master Setup Unit MSU-950 Portable Master Setup Unit MSU-900 Master Set-up Unit (p65) RM-B750 Remote Control Unit RCP-750 Remote Control Panel CNU-700 Camera Command Network Unit HDVF-C730W LCD Colour Viewﬁnder HDVF-700A CRT B/W Viewﬁnder BKP-7911 Script Holder

RM-B750 Remote Control Panel (p67)

Sony HD Product Guide CAMERAS - HD STUDIO 41 CAMERAS - HD STUDIO CAMERAS - HD STUDIO HDC-X300 HD Multi-Purpose Camera

Sony is proud to introduce the HDC-X300 multi-purpose compact HD camera - opening new possibili- ties for HD image acquisition. Designed to meet the growing demand for a compact and affordable HD camera, the HDC-X300 combines high performance with a range of unique features packed in a compact body. The HDC-X300 incorporates three newly developed 1/2-inch type 1.5-mega pixel HD CCDs to offer high resolution, high sensitivity, and high signal-to-noise ratio. Making full use of this performance, the HDC- X300 is equipped with a variety of advanced fea- HDC-X300K package shown tures such as progressive scan modes, slow shutter, and auto-focus function . • Newly designed 1/2” HD CCD, 3 x CCD arrange- ment • Progressive or interlaced scan modes • Slow shutter mode for excellent low light capability, down to 0.003 lx • Uses Sony 700 series command protocol • Small, compact design, including removable Tally light sled • Optional 1/2” autofocus lens. 17 x zoom • HD-SDI output

Supplied accessories Optional accessories - continued Operation manual (1) HFBK-XG1 XGA Output Board AC adaptor (1) MSU-900 Master Setup Unit AC cable (1) MSU-950 Master Setup Unit Tally unit (1) Number plate (1) Lens mount cap (1) VCL-719BXS focus servo lens (1, HDC-X300K/ 310K only)

Optional Accessories HFU-X310 Optical Fiber Interface Unit HFBK-HD1 HD SDI Output Board HFBK-SD1 SDI Output Board HKC-SV1 Filter Servo Unit VCT-U14 Tripod Adaptor Requires A-8279-993-A V-shoe adaptor and K4x8 screw (x4) RCP-750 Remote Control Panel RM-B150 Remote Control Unit RM-B750 Remote Control Unit HFBK-TS1 i.LINK (HDV) Output Board

Sony HD Product Guide CAMERAS - HD STUDIO 43

Speciﬁcations (HDC-X300)

General DC input Power requirements DC jack (1) DC 12 V VCL-719BXS (supplied with the HDC-X300K/X310K) Power consumption Focal length 18 W (camera head only) 6.7 to 127 mm 23.5 W (with the VCL-719BXS, HKC-SV1 Filter Servo Unit, and the Zoom RM-B750 Remote Control Unit connected) Manual or power selectable Operating temperature Zoom ratio -10 to +45 °C (+14 to +113 °F) x19 Storage temperature Maximum aperture -20 to +60 °C (-4 to +140 °F) 1:1.6, 1:2.1 (at telephoto end) Mass Aperture Approx. 1.2 kg Manual or automatic selectable (camera head only) Focusing range Approx. 1.7 kg Infinity to 5 cm (including camera head, tally unit) Filter attachment threads Camera 82 mm dia. 0.75 mm pitch Pickup device Mounting 3-chip 1/2-inch type 1.5-megapixel CCD Sony 1/2-inch bayonet mount Effective picture elements Mass (H x V) 1440 x 1080 1.34 kg including lens hood Optical system F1.4 prism system Built-in filters 1: Clear, 2: 1/4ND, 3: 1/16ND, 4: 1/64ND Lens mount Sony 1/2-inch bayonet mount Signal system 1080/59.94i, 1080/50i Scanning system 59.94i/23.976PsF/29.97PsF selectable at 59.94i, 50i/25PsF selectable at 50i Sync system Internal and External (3 state/VBS (BB)) Sensitivity (2000 lx, 89.9% reflectance) F10 (typical) CAMERAS - HD STUDIO CAMERAS - HD STUDIO Minimum illumination 0.003 lx (F1.4, +48 dB gain, with slow shutter mode at 64 frame accumulation) Gain selection -3, 0, 3, 6, 9, 12, 18, 24, 30, 36, 42, 48 dB Shutter speed 1/60 (50i mode), 1/100, 1/250, 1/500, 1/1000, 1/2000 s Slow shutter 2, 3, 4, 5, 6, 7, 8, 16, 32, 64 frame Clear scan 50 to 200 Hz (50i mode), 60 to 200 Hz (59.94i mode) Smear level -120 dB (typical) S/N ratio 52 dB (typical) Registration 0.02% or less (all zones, without lens) Geometric distortion Below measurable level (without lens) Modulation depth at 21 MHz 40% (typical) (with HD SDI output) Signal inputs Genlock video BNC type (1), 3-level/2-level (VBS, VS) Trigger BNC type (1), TTL level Signal outputs HD SDI BNC type (1), 0.8 Vp-p ±10%, 75 Ω - Video HD D-sub 15-pin (1) Y/Pr/Pb: 1.0 Vp-p, 75 Ω R/G/B: 1.0 Vp-p, 75 Ω HD/VD: TTL level (3 Vp-p) Sync: 0.6 Vp-p, 75 Ω Tally Mini-jack (1) Other inputs/outputs Remote 8-pin (1) Lens 14-pin (1) HDC-X310 Multi-Purpose HD Camera

The HDC-X300 and HDC-X310 incorporate three 1/2-inch type 1.5-mega pixel HD CCDs, which offer high resolution, high sensitivity, and high signal-to- noise characteristics. The HDC-X300 comes equipped with an HD-SDI output on its rear panel, and is the preferred choice for HD-exclusive operations. The HDC-X310, on the other hand, adds more interface and operational ﬂexibility through the use of its associated HFU- X310 signal interface unit, connected via a ﬁber optical cable. This interface unit offers a variety of HDC-X310K shown here with optional HKC-SV1 Filter optional interface boards to cover a range of signal Servo Unit formats, including HD-SDI and SD-SDI, and HDV™ through the i.LINK™ interface, as well as computer XGA output. • Newly designed 1/2” HD CCD, 3 x CCD arrange- ment • Progressive or interlaced scan modes • Slow shutter mode for excellent low light capability, down to 0.003 lx • Uses Sony 700 series command protocol • Small, compact design, including removable Tally light sled *1 In this manual, the HDC-X300 refers to both the HDC-X300 camera • Optional 1/2” autofocus lens. 17 x zoom and HDC-X300K lens package, while the HDC-X310 refers to both the HDC-X310 camera and HDC-X310K lens package. • HDSDI output *2 Auto-focus function is only available using the focus servo lens VCL-719BXS that is included in the HDC-X300K/X310K package. Supplied accessories Operation manual (1) Optional accessories - continued AC adaptor (1) HFBK-XG1 XGA Output Board AC cable (1) MSU-900 Master Setup Unit Tally unit (1) MSU-950 Master Setup Unit Number plate (1) Lens mount cap (1) VCL-719BXS focus servo lens (1, HDC-X300K/ 310K only)

Sony HD Product Guide CAMERAS - HD STUDIO 45

Speciﬁcations (HDC-X310)

General Lens Power requirements 14-pin (1) DC 12 V DC input Power consumption DC jack (1) 19 W (camera head only) VCL-719BXS (supplied with the HDC-X300K/X310K) 24.5 W (with the VCL-719BXS, HKC-SV1 Filter Servo Unit, and the Focal length RM-B750 Remote Control Unit connected) 6.7 to 127 mm Operating temperature Zoom -10 to +45 °C (+14 to +113 °F) Manual or power selectable Storage temperature Zoom ratio -20 to +60 °C (-4 to +140 °F) x19 Mass Maximum aperture Approx. 1.3 kg 1:1.6, 1:2.1 (at telephoto end) (camera head only) Aperture Approx. 1.8 kg Manual or automatic selectable (including camera head, tally unit) Focusing range Camera Infinity to 5 cm Pickup device Filter attachment threads 3-chip 1/2-inch type 1.5-megapixel CCD 82 mm dia. 0.75 mm pitch Effective picture elements Mounting (H x V) 1440 x 1080 Sony 1/2-inch bayonet mount Optical system Mass F1.4 prism system 1.34 kg including lens hood Built-in filters 1: Clear, 2: 1/4ND, 3: 1/16ND, 4: 1/64ND Lens mount Sony 1/2-inch bayonet mount Signal system 1080/59.94i, 1080/50i Scanning system 59.94i/23.976PsF/29.97PsF selectable at 59.94i, 50i/25PsF selectable at 50i Sync system Internal and External (3 state/VBS (BB)) Sensitivity (2000 lx, 89.9% reflectance) F10 (typical) CAMERAS - HD STUDIO CAMERAS - HD STUDIO Minimum illumination 0.003 lx (F1.4, +48 dB gain, with slow shutter mode at 64 frame accumulation) Gain selection -3, 0, 3, 6, 9, 12, 18, 24, 30, 36, 42, 48 dB Shutter speed 1/60 (50i mode), 1/100, 1/250, 1/500, 1/1000, 1/2000 s Slow shutter 2, 3, 4, 5, 6, 7, 8, 16, 32, 64 frame Clear scan 50 to 200 Hz (50i mode), 60 to 200 Hz (59.94i mode) Smear level -120 dB (typical) S/N ratio 52 dB (typical) Registration 0.02% or less (all zones, without lens) Geometric distortion Below measurable level (without lens) Modulation depth at 21 MHz 40% (typical) (with HD SDI output) Signal inputs Genlock video BNC type (1), 3-level/2-level (VBS, VS) Trigger BNC type (1), TTL level Signal outputs HD SDI BNC type (1), 0.8 Vp-p ±10%, 75 Ω - Video HD D-sub 15-pin (1) Y/Pr/Pb: 1.0 Vp-p, 75 Ω R/G/B: 1.0 Vp-p, 75 Ω HD/VD: TTL level (3 Vp-p) Sync: 0.6 Vp-p, 75 Ω Tally Mini-jack (1) Other inputs/outputs OFC Single mode, LC optical connectors (2) Remote 8-pin (1) BRC-H700 HD PTZ Camera System

The BRC-H700 combines a high picture quality HD 3CCD camera and a highly accurate pan/tilt/zoom mechanism into a compact body which can be easily ceiling or desktop mounted. Additionally, Sony offers a variety of camera accessories to meet a range of different signal output requirements. The BRC-H700 supports analogue RGB, Y/Pb/Pr output, and is also equipped with an option card slot. It supports HD-SDI, down converted SD, computer XGA and HDV. • All-in-one stylish robotic camera with Robust Body • Superb picture quality by 1/3 type HD 3-CCDs • Carl Zeiss Vario-Sonnar T* Lens • High accurate Pan/Tilt mechanism • Built-in Auto Focus 48x zoom (12x Optical, 4x Digital) • Desktop and Ceiling-mount installation • Wide system expandability with optional interface cards

Supplied Accessories IR remote commander (1) RS-422 terminal block Connector (1) AC adaptor (1), AC adaptor cable (1) Ceiling bracket (2), Wire rope, Mounting screws Operating instructions (1)

Optional Accessories BRBK-H700 HD optical multiplex card BRU-H700 optical multiplex unit CCFCM100HG HD optical ﬁber cable RM-BR300 remote control unit HFBK-HD1 HD-SDI card HFBK-TS1 HDV card HFBK-XG1 XGA card HKBK-SD1 Down-Converter card

Sony HD Product Guide CAMERAS - HD STUDIO 47

Speciﬁcations

Video output (with option card) Image device HFBK-HD1: HD-SDI, Three 1/3 type IT CCDs HFBK-SD1: Down converted SD (RGB, Y/Cb/Cr, Y/C, Composite, SDI Total picture elements x2) Approx. 1.12Mega pixels HFBK-XG1: WXGA, XGA, VGA Effective picture elements HFBK-TS1:HDV Approx. 1.07Mega pixels Camera control interface Signal system RS-232C (VISCA protocol)/RS-422 (VISCA protocol) 1080/59.94i, 1080/50i (switchable) Back-light compensation Sync system On/Off Internal/External Operating temperature Lens 0 to 40 degrees 12x optical zoom, 48x with digital zoom Storage temperature Carl Zeiss Vario-Sonnar T* -20 to 60 degrees Focal length Power requirement f=4.5 to 54.0mm (F1.6 to F2.8) DC 12V Minimum object distance Power consumption 800mm (tele end) Max. 24W (Without optional card) Horizontal viewing angle without Image Stabilization Dimentions 5.55 degrees (Tele end ) to 60.3 degrees (Wide end) 207mm (Diameter) x 315.8mm (H) Vertical viewing angle without Image Stabilization Mass 3.12 degrees (Tele end) to 36.2 degrees (Wide end) 4.5kg Focus system Horizontal resolution Auto/Manual 650 TV Lines Pan/Tilt angle Effective screen ruling -170 to +170 degrees (Pan), -30 to +90 degrees (Tilt) 1440(H) x 1080(V) dot Pan/Tilt speed Sync systems (selectable external sync) 0.25 to 60 degrees/s (Pan/Tilt) Standard Sync Minimun illumination RGB three-state Sync 6lx (50IRE, F1.6) Y three-state Sync S/N ratio SD Sync 50 dB Lens ﬁlter diameter Shutter speed 72mm 1/10,000 to 1/59.94 (1/50) s Shutter speed (1/59.94i) Gain 1/59.94, 1/90, 1/100, 1/125, 1/180, 1/250, 1/350, 1/500, Auto/Manual (0 to 18 dB and Hyper Gain) 1/725, 1/1,000, 1/1,500, 1/2,000, 1/3,000, 1/4,000, 1/6,000, 1/10,000

White balance CAMERAS - HD STUDIO Shutter speed (1/50i ) Auto, Indoor, Outdoor, One-push WB, Manual 1/50, 1/75, 1/100, 1/120, 1/150, 1/215, 1/300, 1/425, 1/600, 1/1,000, Optical Image Stabilizer 1/1250, 1/1750, 1/2,500, 1/3,500, 1/6,000, 1/10,000 On/Off Gain Image flip 0, 3, 6, 9, 12, 15, 18dB and Hyper Gain (30dB) On/Off White Balance ND filter Indoor/Outdoor 3,200K / 5,800K Off/ND1/ND2 Optical Image Stabilizer Preset positioning On/Off On: Soft/Standard/Hard 16 positions ND filter Video output (built-in) Off/ND1/ND2 ND1: 1/6, ND2 : 1/32 Analogue RGB, Analogue Y/Pb/Pr

System Example: Multiple BRC-H700 camera operation from a remote location Sony HD Product Guide CAMERAS - HD STUDIO - ACCESSORIES 49

CAMERAS - HD STUDIO - ACCESSORIES

BRBK-H700...... 50 BRU-H700...... 50 CCA-5 cables...... 50 CNU-700...... 50 HDCU-1000...... 52 HDCU-1500...... 54 HD-FX100...... 56 HD-TX100...... 56 HDLA-1500...... 57 HDVF-20A...... 58 HDVF-C30W...... 59 HDVF-700A...... 60 HDVF-9900...... 61 HDVF-C730W...... 62 HFBK-HD1...... 63 HFBK-SD1...... 63 HFBK-TS1...... 63 HFBK-XG1...... 63 HKC-SV1...... 63 HFU-X310...... 64 HKCU-1001...... 64 HKCU-1003...... 64 HKCU-1005...... 64 MSU-900/950...... 65 RCP-750...... 66 RCP-700...... 66

RMB-150...... 66 ACCESSORIES CAMERAS - HD STUDIO RMB-750...... 67 RMB-R300...... 67 VCT-14...... 67 BRBK-H700 HD Optical Multiplex Card

HD Optical Multiplex Card With Audio IN (RCA pin) for BRC- H700.

BRU-H700 HD Optical Multiplex Unit Designed for use with the BRC-H700 PTZ camera, the BRU-H700 offers transmission of uncompressed digital data when teamed with the optional BRBK-H700 HD Optical Multiplex Card. With only a single cable connection between the camera and the HD Optical Multiplex Unit, the system is extremely easy to install. The maximum cable length between these units is 1,000 metres – allowing multiple cameras to be located virtually anywhere you want.

CCA-5 Cables 8-pin to 8-pin Remote Control Cable CCA-5-30/1 CCA-5-10 CCA-5-3 Remote control cable for 700 and 900 series camera control system

CNU-700 Command Network Unit The CNU-700 Command Network Unit is the communication hub for multi camera control systems. Allowing diagnostics and re-conﬁguration of system connectivity, the CNU-700 is the backbone of Sony broadcast camera control systems. • High speed data transmission rates - more than 500 kb/s between CNU and MSU/RCP/CCU • Expandable system conﬁguration - up to 12 cameras with one CNU-700 and one BKP-7930 installed • Character function display (monochrome) • Bypass facility to maintain communication between the CCUs and RCPs in the event of power loss or malfunction

Supplied Accessories AC power cord (1) Optional Accessories Plug holder for the AC power cord (1) Operation Manual (1) BKP-7932 Camera Adaptor Modiﬁcation Unit Maintenance Manual (1) BKP-7900 Extension Board BKP-7930 Expansion Board Speciﬁcations BKP-7933 S-bus Interface

General MSU Power requirements 8-pin multiconnector (1 each) AC 220 to 240 V, 50/60 Hz VCS Power consumption 8-pin multiconnector (1 each) 4.0 VA max. AUX 1 and 2 Operating temperature 8-pin multiconnector (1 each) 0 to +45°C Character Mass BNC type (2) video: 0.7 Vp-p, sync: 0.3 Vp-p 9.5 kg Reference Dimensions (W x H x D) BNC type (2) 0.3 Vp-p with loop through output 424 x 132 x 400 RS-232C Input/output connectors D-sub 9-pin (3) CCU 1 through 6 AC input 8-pin multiconnector (1 each) 3 pin (1) RCP 1 through 6 8-pin multiconnector (1 each)

Sony HD Product Guide CAMERAS - HD STUDIO - ACCESSORIES 51

Camera Control System Conﬁguration CAMERAS - HD STUDIO - ACCESSORIES ACCESSORIES CAMERAS - HD STUDIO HDCU-1000 Camera Control Unit

The HDC-1000/HDC-1500 camera can be conﬁg- ured with two types of camera control units – the full-size HDCU-1000 and half-rack HDCU-1500. The optical ﬁber transmission system used in these units maintains the high picture quality of the camera across cable runs of up to 3000 metres* with the HDCU-1000 and up to 1800 metres* with the HDCU-1500. Both models are equipped with a range of built-in interfaces such as HD SDI/SD SDI outputs, HD/SD return inputs, and a down-converted analogue composite monitor output. In addition, a variety of output interfaces are offered via optional boards, which are installed in four slots on the HDCU-1000 and two slots on the HDCU-1500. Furthermore, the Ethernet interface (100Base-T) that is built into both CCUs allows the camera to be controlled over a network. Three types of interface expansion option are available for both CCUs. • The HKCU1001 SD Analogue Interface Unit provides two analogue NTSC or PAL VBS signal outputs, a WFM, and a monitor output. • The HKCU1003 Multi Interface Unit consists of three types of interface board and provides: - Frame reference input and output to lock 2-3 pull- down sequence (Board A) - Two analogue NTSC or PAL VBS signal outputs (Board B)

Optional Accessories Related Products HKCU-1001 SD Analogue Interface Unit HKCU-1003 Multi Interface Unit HDC-1000 Multi-format HD Studio Camera (p34) HKCU-1005 HD/SD Expansion Unit RCP-700 Remote Control Panel RCP-750 Remote Control Panel MSU-900 Master Setup Unit MSU-950 Master Setup Unit RM-B150 Remote Control Unit RM-B750 Remote Control Unit CCA-5 Cables 8-pin/8-pin Remote Control Cable HDC-1500 Multi-format HD Portable Camera (p36)

Sony HD Product Guide CAMERAS - HD STUDIO - ACCESSORIES 53

Speciﬁcations (HDCU-1000)

General Camera Power requirements Optical fiber cable interface AC 100/120/220 to 240 V, 50/60 Hz SMPTE 304M based optical fiber connector (1), 1.5 gb/s optical fiber Maximum current consumption digital transmission, SMPTE 292 M 5.4 A (at 100 V AC, entire system active) Operating temperature *1 HD SDI output and SD SDI output share the same connector. +5 to +40 °C *2 HD monitor output and SD monitor output share the same connector. Mass Approx. 16 kg Dimensions (W x H x D) HKCU1001 SD Analogue Interface Unit 424 x 133 x 410 mm VBS output HD inputs/outputs BNC type (2) HD SDI output*1 Analogue composite monitor output BNC type (4), SMPTE 292M, 1080/50i, 60i, 30P, 25P, 24P, BNC type: WF (1), PIX (1) 720/60P, 50P HD SDI/SD SDI selectable HD monitor output*2 HKCU1003 Multi Interface Unit BNC type (4), SMPTE 292M, 1080/50i, 60i, 30P, 25P, 24P, VDA-A board: VBS I/F 720/60P, 50P VBS output HD SDI/SD SDI selectable, character on/off selectable BNC type (2) HD SDI return input Analogue composite monitor output BNC type (4), SMPTE 292M, 1080/50i, 60i, 30P, 25P, 24P, BNC type: WF (1), PIX (1) 720/60P, 50P VDA-B board: Frame rate I/F Frame reference input/output SD inputs/outputs BNC type (1, loop-through), full pull-down sequence lock SDI output*1 Analogue composite monitor output BNC type (4), SMPTE 259M, Serial digital component BNC type: WF (1), PIX (1) HD SDI/SD SDI selectable SDI monitor output*2 VDA-C board: Sub I/F BNC type (4), SMPTE 259M, Serial digital component, VBS output 480/576-lines BNC type (1) HD SDI/SD SDI selectable, character on/off selectable Analogue component output Analogue composite monitor output BNC type (3), R/G/B or Y/R-Y/B-Y selectable BNC type (1), character on/off selectable SDI return input HKCU1005 HD/SD Expansion Unit BNC type (4), SMPTE 259M, Serial digital component HD SDI/SD SDI output VBS return input BNC type (2) BNC type (4), PAL/NTSC HD SDI/SD SDI monitor output Sync BNC type (2), charactor on/off selectable Reference input BNC type (1, with loop-through), HD tri-level sync or SD black burst Sync output BNC type (1), HD tri-level sync or SD sync Intercom/Tally/PGM Intercom PD & ENG D-sub 25-pin (1), 4W/RTS/CC selectable PGM1/PGM2 0/-20 dBu selectable R-Tally/G-Tally

24 V power in/make contact ACCESSORIES CAMERAS - HD STUDIO Audio MIC1/MIC2 output XLR-3-31 type (2, female), 0/-20 dBu selectable Digital audio output (AES/EBU) BNC type (1), AES/EBU format, 20-bit/48 kHz Embedded audio Embedded audio to HD SDI/SD SDI Prompter Prompter in BNC type (2, with loop-through), Analogue, PAL/NTSC/HD-Y Others RCP/MSU/CNU interface 8-pin (1), Sony Camera Command Network Protocol (for entire camera system control) Ethernet RJ-45 (1), 10BASE-T/100BASE-TX Mic remote D-sub 15-pin WF mode 4-pin (2), Stair step (for SD composite Waveform monitor) WF control D-sub 15-pin (1), GPI (for SDI component WF control) System expansion I/O D-sub 15-pin (1), GPI (for system control with external GPI interface) Trunk line D-sub 9-pin (1), RS-232C (remote line for CHU equipment), 12-pin (round type connector), RS-232C/422 (remote line for CHU equipment) HDCU-1500 Camera Control Unit

The HDC-1000/HDC-1500 camera can both be conﬁgured with the half-rack size HDCU-1500. The optical ﬁber transmission system used in this unit maintains the high picture quality of the camera across cable runs of up to 1800 metres. It offers a range of built-in interfaces such as HD SDI/SD SDI outputs, HD/SD return inputs, and a down-converted analogue composite monitor output. • HDLA-1500 operation • Three HD SDI or SD SDI outputs • Up to eight additional HD SDI or SD SDI outputs (requires two optional HKCU1005 boards) • Three HD SDI, SD SDI, or analogue composite return video inputs • Built-in down-converted analogue composite output • Built-in 2-3 pull-down capability • RM-B750 Remote Control Unit attach capability on the front panel • One channel teleprompter inputs • Built-in Ethernet interface (100Base-T) • Two-channel data trunk line(RS-422A/RS-232C) for easy data transmission • Two-channel microphone outputs (two XLR connectors)

Sony HD Product Guide CAMERAS - HD STUDIO - ACCESSORIES 55

Speciﬁcations (HDCU-1500)

General System expansion I/O Power requirements --- AC 100 to 240 V, 50/60 Hz Trunk line Maximum current consumption 12-pin (round type connector), RS-232C/422 4 A (at 100 V AC, entire system active) (remote line for CHU equipment) Operating temperature -10 to +40 °C Camera Optical fiber cable interface Mass SMPTE 304M based optical fiber connector (1), 1.5 gb/s optical fiber Approx. 6.2 kg digital transmission, SMPTE 292 M Dimensions (W x H x D) 200 x 127 x 410 mm *1 HD SDI output and SD SDI output share the same connector. HD inputs/outputs *2 HD monitor output and SD monitor output share the same connector. HD SDI output*1 BNC type (2), SMPTE 292M, 1080/50i, 60i, 30P, 25P, 24P, 720/60P, 50P HD SDI/SDI selectable HKCU1001 SD Analogue Interface Unit VBS output HD monitor output*2 BNC type (2) BNC type (1), SMPTE 292M, 1080/50i, 60i, 30P, 25P, 24P, Analogue composite monitor output 720/60P, 50P BNC type: WF (1), PIX (1) HD SDI/SD SDI selectable HD SDI return input BNC type (3), SMPTE 292M, 1080/50i, 60i, 30P, 25P, 24P, HKCU1003 Multi Interface Unit 720/60P, 50P VDA-A board: VBS I/F HD SDI/SD SDI/VBS selectable VBS output SD inputs/outputs BNC type (2) SDI output*1 Analogue composite monitor output BNC type (2), SMPTE 259M, Serial digital component BNC type: WF (1), PIX (1) HD SDI/SD SDI selectable VDA-B board: Frame rate I/F SDI monitor output*2 Frame reference input/output BNC type (1), SMPTE 259M, Serial digital component, BNC type (1, loop-through), full pull-down sequence lock 480/576-lines Analogue composite monitor output HD SDI/SD SDI selectable BNC type: WF (1), PIX (1) Analogue composite monitor output VDA-C board: Sub I/F BNC type (1), Monitor/Sync selectable, character on/off VBS output selectable BNC type (1) SDI return input Analogue component output BNC type (3), SMPTE 259M, Serial digital component BNC type (3), R/G/B or Y/R-Y/B-Y selectable HD SDI/SD SDI/VBS selectable VBS return input BNC type (3), PAL/NTSC HKCU1005 HD/SD Expansion Unit HD SDI/SD SDI/VBS selectable HD SDI/SD SDI output BNC type (2) Sync HD SDI/SD SDI monitor output Reference input BNC type (2), charactor on/off selectable BNC type (1, with loop-through), HD tri-level sync or SD black burst Sync output BNC type (1), HD tri-level sync or SD sync Sync/Monitor selectable Intercom/Tally/PGM

Intercom PD & ENG ACCESSORIES CAMERAS - HD STUDIO D-sub 25-pin (1), 4W/RTS/CC selectable PGM1/PGM2 0/-20 dBu selectable R-Tally/G-Tally 24 V power in/make contact Audio MIC1/MIC2 output XLR-3-31 type (2, female), 0/-20 dBu selectable Digital audio output (AES/EBU) --- Embedded audio Embedded audio to HD SDI/SD SDI Prompter Prompter in BNC type (1, with loop-through), Analogue, PAL/NTSC/HD-Y Others RCP/MSU/CNU interface 8-pin (1), Sony Camera Command Network Protocol (for entire camera system control) Ethernet RJ-45 (1), 10BASE-T/100BASE-TX Mic remote D-sub 15-pin WF mode 4-pin (1), Stair step (for SD composite Waveform monitor) WF control D-sub 15-pin (1), GPI (for SDI component WF control) WF control/mic remote selectable HD-FX100 Triax Adaptor (CCU Side)

The HD-TX100 and HD-FX100 HD Triax Adaptors extensively broaden the range of applications suited to the HDC-1000/HDC-1500. By converting optical ﬁber transmission to the widely used triax transmission, they provide the high reliability and stability needed for ﬁeld-production applications. They enable high-quality pictures to be transmitted from the HDC-1000 or HDC-1500 camera or HDC-1500 mounted on the HDLA-1500 over long distances – up to 1400 m (4500 feet) with a ø 14.5 mm triax cable or 1000 m (3200 feet) with a ø 13.2 mm triax cable. Supplied Accessories B4 x 8 screw (8) AC power cord (1) AC power cord plug holder (1) Operation manual (1)

Optional Accessories HD-TX100 HD Triax Adaptor HDCU-1000 Camera Control Unit HDCU-1500 Camera Control Unit

HD-TX100 Triax Adaptor (Camera Side)

In addition to the features mentioned above, the HDTX100 enables hybrid triax and optical ﬁber operation. In this case, longer cable runs of more than 2000 m (6500 feet) can be achieved with the HDC1500 portable camera conﬁguration. Supplied Accessories Operation Manual (1)

Optional Accessories HD-FX100 HD Triax Adaptor (Fischer type) HDLA-1500 Large Lens Adaptor (CE) HDC-1000 Multi-format HD Camera HDC-1500 Multi-format HD Camera

Sony HD Product Guide CAMERAS - HD STUDIO - ACCESSORIES 57

HDLA-1500 Large Lens Adaptor for the HDC-1500/1550/3300

Responding to the ever-increasing requirement of operations that combine a portable camera with a large lens, Sony is continuously seeking the optimum solution. The result is the highly sophisticated HDLA-1500 Large Lens Adaptor – maximizing operability. Generally, setting up a portable camera to a large lens adaptor can be a difficult task, especially fine-tuning the mechanical adjustments between each device. With the new HDLA-1500 adaptor, time consum- ing adjustments, as well as wiring, are absolutely eliminated. • Totally new interlocking quick release mechanism • Low profile design • Camera and lens can be mounted and removed independently

Supplied Accessories Operation manual (1) Camera hangers (2) Angle-adjusting plates (2) Cable clamps (2) Number plates for side panel (2 sets) Number plates for up-tally lamp (2 sets)

Optional Accessories HDC-1500 Portable Multi-format Camera HDCU-1000 Camera Control Unit HDCU-1500 Camera Control HD-TX100 Triax Adaptor

Speciﬁcations ACCESSORIES CAMERAS - HD STUDIO

General Power requirements 240 V AC, 1.2 A (max.) 180 V DC, 0.6 A (max.) 12 V DC, 9 A (max.) Operating temperature -20 oC to +45 oC Storage temperature -20 oC to +60 oC Mass Approx. 18.5 kg HDLA-1500 shown with optional camera, view- Dimensions See diagram ﬁnder, lens and pedestal Input/output connectors LENS 36-pin (1) VF D-sub 25-pin (1) DC IN XLR 4-pin, 10.5 to 17 V DC DC OUT 4-pin (1), 10.5 to 17 V DC, 1.5 A max. (May be limited due to load and input conditions) HDVF-20A HD B/W Viewﬁnder

This 2” 16:9 widescreen B/W viewfinder offers a high centre resolution of 500 TVL in both 16:9 and 4:3 modes. It also has the flexibility of accommodating multiple frame rates. • Eye-piece is removable from the viewfinder allowing direct view of the CRT. • Marker indication On/Off function • Tally lamp in the camera body can be viewed even when not looking at the viewfinder screen (under sliding cover) • Comes equipped with a new external microphone

Supplied Accessories Microphone spacer - diameter 19mm (1) Microphone spacer - diameter 21mm (1) Operation manual (1)

Speciﬁcations

General Power Requirements 10.5 to 17 V DC Power consumption 4 W Operating temperature -20 C to 45 C Storage temperature -20 C to 50 C External dimensions (W x H x D) 239 x 76 x 210 mm Mass 600 g Performance CRT 2” type monochrome Horizontal resolution 500 TVL (at centre) Signal system Conforming to BTA-S001 and SMPTE 274M standards Supported formats Effective scanning lines/Format/Horizontal scanning frequency/Vertical scanning frequency 1080/23.98PsF/26.97 kHz/47.95 Hz 1080/24PsF/27 kHz/48 Hz 1080/25PsF/28.13 kHz/50 Hz 1080/29.97PsF/33.72 kHz/59.94 Hz 1080/30PsF/33.75 kHz/60 Hz 1080/50i/28.13 kHz/50 Hz 1080/59.94i/33.72 kHz/59.94 Hz 1080/60i/33.75 kHz/60 Hz 1035/59.94i/33.72 kHz/59.94 Hz 1035/60i/33.75 kHz/60 Hz Video Input 1.0 Vp-p +/- 6 dB, 75 ohm terminated Indicators REC/TALLY, BATT, VTR SAVE, !

Sony HD Product Guide CAMERAS - HD STUDIO - ACCESSORIES 59

HDVF-C30W HD Colour Viewﬁnder

This high quality 2.7-inch type TFT colour LCD panel provides a high resolution of 960 pixels horizontally (equivalent to 540 TV lines) x 540 pixels vertically. • Accommodates multiple frame rates • The 2x magniﬁcation function simpliﬁes focus operation, especially when prime lenses are used • Gray scale signals can be generated, allowing camera operators to easily adjust exposure to the appropriate level • A detachable eyepiece design allows the user to directly view the LCD *Light weight construction • Very low power consumption

Supplied Accessories Operation manual (1) Connecting cable (1)

Speciﬁcations

General Power supply DC 10.5 to 17.0 V (supplied by the camera) Power consumption 5.2 W Operating temperature 0 °C to 45 °C Storage temperature - 20 °C to 60 °C Mass 850 g LCD 2.7-inch type colour TFT screen Image display area dimensions 59.04 (H) x 33.21 (V) mm CAMERAS - HD STUDIO - ACCESSORIES ACCESSORIES CAMERAS - HD STUDIO Performance Brightness 300 cd/m2 Resolution 500 or more lines Supported formats Effective scanning lines/Format/Horizontal scanning frequency/Vertical scanning frequency 1080/23.98PsF/26.97 kHz/47.95 Hz 1080/24PsF/27 kHz/48 Hz 1080/25PsF/28.13 kHz/50 Hz 1080/29.97PsF/33.72 kHz/59.94 Hz 1080/30PsF/33.75 kHz/60 Hz 1080/50i/28.13 kHz/50 Hz 1080/59.94i/33.72 kHz/59.94 Hz 1080/60i/33.75 kHz/60 Hz Colour temperature 6500 K Indicators R TALLY/G TALLY/BATT/ MAG/SAVE/! Input signals Pb, Pr: 0.7 Vp-p, asynchronous, 75 ohms terminated Y: 1.0 Vp-p, synchronous, 75 ohms terminated HDVF-700A 7” HD B/W CRT Viewﬁnder

This high resolution B/W CRT viewﬁnder is specially designed for use with HDC studio/OB cameras - for direct camera installation. It also has the beneﬁt of accommodating multiple frame rates. • Compact size, lightweight design • Extremely high centre resolution of 1000 TV lines • Wide peaking range resulting in a very crisp image and accurate focusing • Large easily visible tally lamps • Underscan display • 16:9/4:3 switchable • Picture in picture for return video monitoring • HD return video signal Supplied Accessories Studio monitor hood (1) Fuse (1) Operation manual (1) Number plate (1)

Optional Accessories VFH-770 Viewﬁnder hood

Speciﬁcations

General 1080/30PsF/33.75 kHz/60 Hz Power Requirements 1080/50i/28.13 kHz/50 Hz 10.5 to 17 V DC (supplied by the camera) 1080/59.94i/33.72 kHz/59.94 Hz Power consumption 1080/60i/33.75 kHz/60 Hz 33 W 1035/59.94i/33.72 kHz/59.94 Hz Operating temperature 1035/60i/33.75 kHz/60 Hz 0 C to 40 C Video Input Storage temperature 1.0 Vp-p +/- 6 dB, 75 ohm terminated -20 °C to °50 C Video input Mass 1.0 Vp-p +/- 6 dB (SMPTE 240M), 75 ohms terminated 5 kg (not including hood) DC restoration CRT Back porch type 7” type monochrome, 90° deflection Back porch level: within 2% of peak Dimensions (The fluctuation in black level against 10% to 90% fluctuation in APL) 160 x 131 mm Frequency response Picture size 0.1 to 23 MHz (+/- 2dB) 120 x 90 mm (4:3 aspect ratio) 23 to 27 MHz (+/- 3 dB) Peaking Deflection and high voltage 0 to 18 dB (17 MHz) Brightness Synchronisation 500 cd/m2 Line pull range: Horizontal: +/-500 Hz or more, Vertical: -10 Hz or more Resolution Line hold range: +/- 500 Hz or more 800 lines at centre 600 lines at edges Geometric distortion 2.0% or less EHT voltage regulation within +/-2.0% EHT voltage 12.5 kV (standard Input voltages and signal characteristics Effective scanning lines/Format/Horizontal scanning frequency/Vertical scanning frequency 1080/23.98PsF/26.97 kHz/47.95 Hz 1080/24PsF/27 kHz/48 Hz 1080/25PsF/28.13 kHz/50 Hz 1080/29.97PsF/33.72 kHz/59.94 Hz

Sony HD Product Guide CAMERAS - HD STUDIO - ACCESSORIES 61

HDVF-9900 9” HD Colour CRT Viewﬁnder

Supplied Accessories Operation manual (1) Connecting cable (1)

Optional Accessories VFH-770 Viewﬁnder hood

Speciﬁcations

General Power supply DC 10.5 to 17.0 V (supplied by the camera) Power consumption 5.2 W Operating temperature 0 °C to 45 °C Storage temperature - 20 °C to 60 °C Mass 850 g ACCESSORIES CAMERAS - HD STUDIO LCD 2.7-inch type colour TFT screen Image display area dimensions 59.04 (H) x 33.21 (V) mm Performance Brightness 300 cd/m2 Resolution 500 or more lines Supported formats Effective scanning lines/Format/Horizontal scanning frequency/Vertical scanning frequency 1080/23.98PsF/26.97 kHz/47.95 Hz 1080/24PsF/27 kHz/48 Hz 1080/25PsF/28.13 kHz/50 Hz 1080/29.97PsF/33.72 kHz/59.94 Hz 1080/30PsF/33.75 kHz/60 Hz 1080/50i/28.13 kHz/50 Hz 1080/59.94i/33.72 kHz/59.94 Hz 1080/60i/33.75 kHz/60 Hz Colour temperature 6500 K Indicators R TALLY/G TALLY/BATT/ MAG/SAVE/! Input signals Pb, Pr: 0.7 Vp-p, asynchronous, 75 ohms terminated Y: 1.0 Vp-p, synchronous, 75 ohms terminated HDVF-C730W Multi-Format HD Colour LCD Viewﬁnder

The new HDVF-C730W is a versatile colour LCD viewﬁnder compatible with a broad range of Sony broadcast cameras and camcorders • High quality 6.3” LCD panel • 400:1 contrast ratio • The extremely compact design allows great pan- ning and tilting angles than CRT-based viewﬁnders • Very low power consumption

Supplied Accessories Monitor hood (1) Number plate (1) Operation manual (1) V-shaped shoe attachment (1) Hexagonal key (1) Hexagonal socket head screws (4) Connecting cable (1)

Speciﬁcations

General Brightness Power Requirement (from camera head) 230cd/m2 DC10.5-17.0 V Contrast Power Consumption 400 : 1 14W Viewable angle Mass (Up) 45 deg. 2.2kg (Down) 60 deg. Operating Temperature (Right) 60 deg. 0 deg.C to +45 deg.C (Left) 60 deg. Storage Temperature Lag -20 deg.C to +60 deg.C 21ms Format Display Interlace ! / R TALLY / G TALLY/BATT 1080/50i, 59.94i, 60i Conector Progressive Round type 20 pin 1080/23.98PsF, 24PsF, 25PsF, 29.97PsF, 30PsF LCD device LCD Size 6.3 inches Effective Picture Size (mm) 129.0(H)x96.8(V)mm Pixel No 1024×RGB×768 Display Area Screen Aspect Ratio 16:9 Effective Picture Size (mm) 129.0(H)x69.1(V) Effective Screen diagonal (mm) 146.3 mm Effective Pixel No. 1024×RGB×576 Others Colour Gamut 16.19mil(RGB 8bit) Colour Space (vs NTSC) 40% Colour Temperature 6500K Colour Filter RGB V. Stripe

Sony HD Product Guide CAMERAS - HD STUDIO - ACCESSORIES 63

HFBK-HD1 HD SDI Output Board

The HFBK-HD1 is an HD SDI Output Board for the HFU- X310 Optical Interface Unit which is used with the HDC- X310/X310K HD multi-purpose camera. It can also be used with the BRC-H700 remote PTZ camera system.

HFBK-SD1 SDI Output Board

The HFBK-SD1 is an SDI Output Board for the HFU-X310 Optical Interface Unit which is used with the HDC-X310/X310K HD multi-purpose camera. It can also be used with the BRC-H700 remote PTZ camera system.

HFBK-TS1 i.LINK (HDV) Output Board

The HFBK-TS1 is an i.LINK (HDV) Output Board for the HFU-X310 Optical Interface Unit which is used with the HDC-X310/X310K HD multipurpose camera. It can also be used with the BRC-H700 remote PTZ camera system.

HFBK-XG1 XGA Output Board CAMERAS - HD STUDIO - ACCESSORIES ACCESSORIES CAMERAS - HD STUDIO

The HFBK-XG1 is an XGA Output Board for the HFU-X310 Optical Interface Unit which is used with the HDC-X310/X310K HD multi-purpose camera. It can also be used with the BRC-H700 remote PTZ camera system.

HKC-SV1 Filter Servo Unit

The HKC-SV1 is a servo unit that allows the optical ND ﬁlters of the HDC-X300/X310 to be controlled remotely from the RM-B750/B150 Remote Control Unit, RCP-700 Series Remote Control Panel, or MSU-900/950 Master Setup Unit. HFU-X310 SD Analogue Interface Unit

The HFU-X310 Interface Unit is a 2U-high, half-rack- wide unit with an optical fiber interface. Digital data - including external sync and camera control signals - can be transmitted between the HDC-X310 and the HFU-X310 via an optical fiber cable*. This cable can be up to 1000 meters long, which allows the camera to be installed virtually anywhere required. * A single mode fibre cable with LC connector is required for the connection between the HDC-X310 and HFU-X310.

Supplied Accessories Operation manual (1) OFC cover (1) M3 x 4 screws (2), M4 x 4 screws (1) Multi-connector plug (1)

Speciﬁcations

General Power requirements Signal inputs/outputs AC 100 to 240 V, 50/60 Hz Remote Current consumption 8-pin (1) Max. 0.6 A Genlock Operating temperature BNC type (2), 3-level/2-level (VBS, VS) +5 to +40 °C Sync block 0.3 Vp-p (when terminated), 75 Ω, loop-through Storage temperature HD SDI input -20 to +60 °C * BNC type (1) Conforming to SMPTE 292M Maximum cable length Optical ﬁber cable (single mode) OFC 1000 m Single mode, LC connectors (2), send/receive Dimensions (W x H x D) Multi-connector 200 x 88 x 215 mm excluding projections 6-pin (1) Mass Approx. AC input 2 kg 3-pin (1)

HKCU-1001 SD Analogue Interface Unit Optional board for the HDCU-1000 and HDCU-1500 provides composite outputs in addition to monitor outputs. Speciﬁcations VBS output BNC type (2) Analogue composite monitor output BNC type: WF (1), PIX (1)

HKCU-1003 Multi Interface Unit Optional board for the HDCU-1000 and HDCU-1500 provides analogue composite, monitor outputs and selectable RGB/component outputs. Speciﬁcations VDA-A board: VBS I/F VBS output BNC type (2) Analogue composite monitor output BNC type: WF (1), PIX (1) VDA-B board: Frame rate I/F Frame reference input/output BNC type (1, loop-through), full pull-down sequence lock Analogue composite monitor output BNC type: WF (1), PIX (1) VDA-C board: Sub I/F VBS output BNC type (1) Analogue component output BNC type (3), R/G/B or Y/R-Y/B-Y selectable

Sony HD Product Guide CAMERAS - HD STUDIO - ACCESSORIES 65

HKCU-1005 HD/SD Expansion Unit Optional board for the HDCU-1000 and HDCU-1500 provides analogue composite, monitor outputs and selectable RGB/ component outputs. Speciﬁcations HD SDI/SD SDI output BNC type (2) HD SDI/SD SDI monitor output BNC type (2), charactor on/off selectable

MSU-900/950 Master Set-up Units

The MSU-900/950 Master Setup Unit is a central control panel used for the adjustment of camera parameters in a multi-camera system. The MSU- 900/950 is connected to each camera control unit in the system via the CNU-700 Command Network Unit or an Ethernet network hub. • Central control of camera parameters for the entire camera system • Picture and waveform monitor switching • Precise picture adjustment MSU-900 Master Set-up Unit • Built-in 6.5-inch* (viewable area, measured diagonally) type LCD display for clear viewing of adjustment parameters during operation • Memory Stick slot for storing/recalling ﬁles • Built-in Ethernet interface (100Base-T)

Speciﬁcations ACCESSORIES CAMERAS - HD STUDIO

General Power requirements AC 100 to 240 V, 50/60 Hz Current consumption 0.35 A Operating temperature +5 to +40 °C Maximum cable length 200 m Mass MSU-900 Approx. 4.5 kg MSU-950 Approx. 3.7 kg Dimensions (W x H x D) MSU-900 482 x 67 x 222 mm MSU-950 204 x 354 x 67 mm Inputs/outputs Remote CCU/CNU: 8-pin (1) AUX: 8-pin (1) I/O port 50-pin (1) MSU-950 Master Set-up Unit Ethernet 6-pin (1) AC input 3-pin (1) CAMERAS - HD STUDIO - ACCESSORIES

RCP-750 Remote Control Panel

The RCP-750 Series Remote Control Panel is also available, providing a range of control functions from the basic to the very sophisticated for operational adjustments of an HDC1000/HDC1500. • Small size with full paint control • LCD panel for full access to menu system • Memory Stick operation (Up to 64 MB) • Parallel control function with MSU

Speciﬁcations

General Power requirements DC 10.5 to 35 V Power consumption Inputs/Outputs 4 W max. Remote Maximum cable length CCU/CNU: 8-pin x 1 200m with HDCU connected AUX: 8-pin x 1 Operating temperature EXT I/O 5 °C to 40 °C 9-pin x 1 Mass 1.5 kg Dimensions (W x H x D) 102 mm x 354 mm x 126.5 mm

RCP-700 Remote Control Panel The RCP-700 Series Remote Control Panel provides basic operatonal adjustments for the HDC- 1000/1500 cameras • Controls painting (black and white), Master Black and Iris control for daily operation • Basically used as a sub control panel to support MSU-900/950 or RCP-750. • Up to six unit can be mounted in a 19” rack draw

Speciﬁcations

General Mass 1.0 kg Dimensions (W x H x D) 68 x 221 x 127mm Connectors Remote CNU/CCU: 8-pin Preview 6-pin

RM-B150 Remote Control Unit

Field Remote Control Panel for BC Cameras

Sony HD Product Guide CAMERAS - HD STUDIO - ACCESSORIES 67

RM-B750 Remote Control Unit

The RM-B750 Remote Control Unit has been designed to offer a highly mobile and fully controllable camera system in the ﬁeld. The RM-B750 can be connected directly to the HDC-1000/HDC-1500 camera or attached to the half-rack HDCU-1500 Camera Control Unit. • Full function remote control of DVW, MSW, HDW, BVP and HDC camcorders and cameras • 3.5” colour LDC touch screen for full menu access and picture monitoring • Brightness and contrast controls for LCD screen Speciﬁcations • Separate BNC monitor output General Power requirements • VTR transport controls that can be assigned to DC 10.5 to 30 V max., supplied from camera/CCU other functions for use with portable cameras Operating temperature 5° C to 40° C • 10m connection supplied as standard (up to 50m Mass possible) Approx. 0.7 kg Dimensions (W x H x D) • Can be attached to HDCU-950 for full control of 197 x 62 x 124 mm Inputs this CCU, without the need for MSU/ RCP Control interface 8-pin (1) • Memory Stick™ slot for easy storage and retrieval Monitor input of camera setups BNC type (1), VBS (No HD signal capable)

RM-BR300 Remote Control Unit

Designed for use with the BRC-H700 PTZ camera, the RM-BR300 Remote Control Panel controls all camera settings, including the Pan/Tilt/Zoom functions and sixteen preset patterns. The ergonomic

joystick design and feature-rich control panel provide ACCESSORIES CAMERAS - HD STUDIO superb operability in various remote-shooting applications.

VCT-14 Tripod Adaptor

Speciﬁcations Dimensions 282(W) x 27(H) x 80(D)mm Mass 900 g Sony HD Product Guide VIDEO RECORDERS / PLAYERS - HDCAM SR 69

VIDEO RECORDERS/PLAYERS - HDCAM SR

SRW-5500...... 70 SRW-5000...... 72 SRW-1...... 74 SRPC-1...... 74

ACCESSORIES HKSR-101...... 75 HKSR-5001...... 76 HKSR-5002...... 76 HKSR-5003...... 76 RMM110...... 76 VIDEO RECORDERS / PLAYERS - HDCAM SR - HDCAM SR VIDEO RECORDERS / PLAYERS SRW-5500 HDCAM SR Digital Video Recorder

The SRW-5500 is a high-end HD digital videocassette recorder that employs the HDCAM-SR format. This VTR also allows recording and playback of the well-proven HDCAM format. Applications range from HDTV to digital cinematography. Key features include high-quality 1080i, 1080PsF, or 720P recording and playback, a wide array of internal format conversions, including 4:4:4 to 4:2:2 and legacy playback of Digital BETACAM tape formats. • Dual Recording Format switchable • Multi-frame rate recording • 720P recording and playback (HDCAM-SR only) • Switchable 4:4:4/4:2:2 recording (option) • High quality MPEG-4 studio proﬁle compression • High quality audio recording: 12 channels, 24-bit audio at 48kHz in the HDCAM-SR format • Internal format conversion including up and down conversion, 4:4:4 to 4:2:2 conversion • Playback of Digital Betacam format tapes • Long recording time on a single cassette of up to 155 minutes at 1080/24PsF • User-friendly controls • Frame accurate insert/assemble editing • High speed colour picture search • Dynamic tracking playback

Supplied Accessories Related Products Operation Manual Installation Manual SRW-1/SRPC-1 HDCAM SR Portable Digital Video Recorder (p74) Optional Accessories HKSR-5001 Format-Converter Board HKSR-5002 Digital BETACAM Processor Board HKSR-5003 RGB Processor Boards RMM-110 Rack-Mount Kit HKDV-900 HD Digital Video Controller

Sony HD Product Guide VIDEO RECORDERS / PLAYERS - HDCAM SR 71

Speciﬁcations (SRW-5500)

General Analogue-audio output (CH1/2/3/4/Cue**) Power requirements XLR-3-pin type, (male x5), +4 dBm, (with a 600 Ω load), 100 to 240 V AC (±10%, 50/60 Hz) low impedance, balanced Power consumption Monitor output (L/R) 230 W (without options)/320 W (with all option boards installed) XLR-3-pin type, (male x2), +4 dBm, (with a 600 Ω load), Operating temperature low impedance, balanced +5 °C to +40 °C Time-code output Storage temperature XLR-3-pin type, (male x1), 2.2 Vp-p low impedance, balanced -20 °C to +60 °C Phones Operating humidity JM-60 stereo phone jack, -∞ to 12 dBu (with an 8 Ω load), unbalanced 25% to 80% (relative humidity) Remote 1 input Mass (approx.) D-sub 9-pin, (female), Sony 9-pin remote interface 30 kg Remote 1 input/output Dimensions (W x H x D excluding protrusions) D-sub 9-pin, (female), Sony 9-pin remote interface 427 x 218 x 544 mm Video control Tape speed D-sub 9-pin, (female), (for optional HKDV-900) HDCAM-SR: 94.2 mm/s (24 Hz) Parallel remote HDCAM: 77.4 mm/s (24 Hz) D-sub 50-pin, (female) Digital Betacam: 96.7 mm/s Ethernet HDCAM-SR/HDCAM* recording/ Playback time 10Base-T modular jack 155 min with BCT-124SR cassette (24 Hz) with BCT-124SRL or BCT-124HDL tape Digital-Video Performance Sampling frequency Digital Betacam playback time HDCAM-SR: Y: 74.25 MHz, Pb/Pr: 37.125 MHz, G/B/R: 74.25 MHz 124 minutes with BCT-D124L tape HDCAM*: Y: 74.25 MHz, Pb/Pr: 37.125 MHz Fast-forward/rewind time Quantization Approx. 4 min with BCT-124SR cassette 10 bits/sample Search speed range (Shuttle) Compression HDCAM-SR: Still to ±50 times normal playback speed (24 Hz) HDCAM-SR: MPEG-4 Studio Profile HDCAM: Still to ±58 times normal playback speed (25 Hz) HDCAM*: Coefficient Recording System Digital Betacam: Still to ±50 times normal playback speed Channel coding Search speed range (Variable mode) S-NRZ HDCAM-SR: -1 to 2 times normal playback speed Error correction HDCAM: -1 to 2 times normal playback speed Reed-Solomon code Digital Betacam: -1 to 3 times normal playback speed Error concealment Search speed range (Jog Mode) Adaptive three-dimensional HDCAM-SR: Still to ±2 times normal playback speed HDCAM: Still to ±3 times normal playback speed Analogue Composite-Output Performance Digital Betacam: Still to ±3 times normal playback speed Bandwidth Dynamic Tracking Range Y: 0 to 5.75 MHz +5.0 dB/-3.0 dB -1 to +2 times normal playback speed S/N ratio Servo-lock time 56 dB or more 1.0 sec or less (from standby on) Y/C delay Load/unload time 15 ns or less 7.0 sec or less K Factor (2T Pulse) Input/Output 1% or less Output SCH phase HD-SDI input A Based upon RS-170A/CCIR R.624-3 BNC (1+ 1 for monitoring loop-through), Serial digital (1.485 Gb/s), SMPTE 292M/BTA S-004/ITU-R.BT 709 Digital-Audio Performance HD-SDI input B (optional HKSR-5003 required) Sampling frequency BNC (1+ 1 for monitoring loop-through), Serial digital (1.485 Gb/s), 48 kHz (synchronized with video) SMPTE 292M/BTA S-004/ITU-R.BT 709 Quantization HD/SD reference video input 1 HDCAM-SR: 24 bits/sample BNC (1 + 1 for loop-through), Tri Level sync, 0.6 Vp-p, 75 Ω, HDCAM*: 20 bits/sample sync negative or Black Burst, 0.286 Vp-p, 75 Ω, sync negative Wow & flutter HD/SD reference video input 2 (optional HKSR-5001 required) Below measurable level

BNC (1 + 1 for loop-through), Tri Level sync, 0.6 Vp-p, 75 Ω, Headroom - HDCAM SR VIDEO RECORDERS / PLAYERS sync negative or Black Burst, 0.286 Vp-p, 75 Ω, sync negative 20/18/16/12 dB selectable Digital-audio input (CH1/2, CH3/4, CH5/6, CH7/8, CH9/10, CH11/12) Analogue Audio-Output Performance BNC (x6, AES/EBU), unbalanced D/A quantization Analogue audio input (Cue) - (only on SRW-5500) 24 bits/sample XLR-3-pin, female x1 Frequency response Time-code input 20 Hz to 20 kHz, +0.5 dB/-1.0 dB (0 dB at 1 kHz) XLR-3-pin type, (female x1), 0.5 to 18 Vp-p, 10 kΩ, balanced Dynamic range HD-SDI output More than 100 dB (At 1dB at 1 kHz) BNC (x3, with character out), Serial digital (1.485 Gb/s), Distortion SMPTE 292M/BTA S004/ITU-R.BT 709 Less than 0.05% (At 1 kHz, reference level) Format-converter output (optional HKSR-5001 required) Crosstalk BNC (x2), with character out Less than -80 dB (At 1 kHz, between any two channels) SD-SDI output De-emphasis BNC (2 + 1 with character out), D1 serial digital (270 Mb/s), SMPTE T1 = 50 µs, T2 = 15 µs (auto on/off) 259M Analogue down-converted output Composite: BNC (x1 with character out) 1.0 Vp-p, 75 Ω, sync nega tive) SD sync: BNC (x1, Black Burst, 0.286 Vp-p, 75 Ω, sync negative) Analogue reference output 1125 Sync: BNC (x2), Tri Level sync, 0.6 Vp-p, 75 Ω, sync negative Digital-audio output (CH1/2 CH3/4 CH5/6 CH7/8 CH9/10 CH11/12) BNC (x6), AES/EBU, unbalanced SRW-5000 HDCAM SR Digital Video Recorder

The SRW-5000 is a high bit rate high definition VTR which records a 10 bit 4:2:2 signal at a bit rate of 440 Mbps, and 12 channels of audio at 24-bit per sample resolution. It records a 1080-line input signal at 23.98, 24, 25, 29.97 and 30 frames/second in Pro- gressive Segmented Frame format, and at 50, 59.94 and 60 fields/second, in Interlace format. HDCAM-SR is a high quality mastering format, which provides pristine picture quality. It is suitable for Digital cinema production and mastering, broadcast and distribution. • Multi-frame rate recording • MPEG-4 Studio Profile compression • Records 12 channels of audio at 24 bits per sample • Plays back HDCAM tapes • Optional Digital Betacam playback • Optional RGB Recording and Playback Capability • Frame-accurate Insert/Assemble Editing • Pre-Read Editing, Edit/Record Confidence Play- back • SNMP support maintenance • Advanced control panel with live image display

Sony HD Product Guide VIDEO RECORDERS / PLAYERS - HDCAM SR 73

Speciﬁcations (SRW-5000)

BNC (1 + 1 for loop-through), Tri Level sync, 0.6 Vp-p, 75 Ω, Headroom - HDCAM SR VIDEO RECORDERS / PLAYERS sync negative or Black Burst, 0.286 Vp-p, 75 Ω, sync negative 20/18/16/12 dB selectable Digital-audio input (CH1/2, CH3/4, CH5/6, CH7/8, CH9/10, CH11/12) Analogue Audio-Output Performance BNC (x6, AES/EBU), unbalanced D/A quantization Analogue audio input (Cue) - (only on SRW-5500) 24 bits/sample XLR-3-pin, female x1 Frequency response Time-code input 20 Hz to 20 kHz, +0.5 dB/-1.0 dB (0 dB at 1 kHz) XLR-3-pin type, (female x1), 0.5 to 18 Vp-p, 10 kΩ, balanced Dynamic range HD-SDI output More than 100 dB (At 1dB at 1 kHz) BNC (x3, with character out), Serial digital (1.485 Gb/s), Distortion SMPTE 292M/BTA S004/ITU-R.BT 709 Less than 0.05% (At 1 kHz, reference level) Format-converter output (optional HKSR-5001 required) Crosstalk BNC (x2), with character out Less than -80 dB (At 1 kHz, between any two channels) SD-SDI output De-emphasis BNC (2 + 1 with character out), D1 serial digital (270 Mb/s), SMPTE T1 = 50 µs, T2 = 15 µs (auto on/off) 259M Analogue down-converted output *The SRW-5000 does not support HDCAM recording. Composite: BNC (x1 with character out) 1.0 Vp-p, 75 Ω, sync nega **HDCAM and Digital Betacam playback only. tive) SD sync: BNC (x1, Black Burst, 0.286 Vp-p, 75 Ω, sync negative) Analogue reference output 1125 Sync: BNC (x2), Tri Level sync, 0.6 Vp-p, 75 Ω, sync negative Digital-audio output (CH1/2 CH3/4 CH5/6 CH7/8 CH9/10 CH11/12) BNC (x6), AES/EBU, unbalanced SRW-1/SRPC-1 HDCAM SR Portable Digital Video Recorder & Processor

The SRW-1 HD Portable Digital Video Recorder and the SRPC-1 HD Video Processor are the newest members of the CineAlta product lineup, and form the first Sony full-bandwidth 4:4:4 (RGB) portable VTR system, adopting the HDCAM-SR format. The SRW-1/SRPC-1 offers virtually lossless 1080-line high-definition recordings at multiple frame rates on the very latest HDCAM-SR tape media. This new system further enhances the flexibility of CineAlta products in field production applications. • Multi-frame-rate 1080 HD Recording • Both progressive and interlaced frame rates can be recorded (23.98 PsF, 24 PsF, 25 PsF, 29.97 PsF, 50P, 50i, 59.94i) • 720P Recording and Playback • Long Recording Time - up to 50 minutes at 1080/23.98P and up to 40 minutes at 1080/59.94i or 720/59.94P • High quality audio recording: 12 channels, 24-bit audio at 48kHz in the HDCAM-SR format • Internal format conversion including up and down- conversion and 4:4:4 to 4:2:2 conversion

Supplied Accessories Related Products Operation Manual SRW-5000 HDCAM SR Digital Recorder (p70-71) Optional Accessories HKSR-101 Optical Interface Board AC-550A AC Adapter AC-DN10 AC Adapter BP-GL65/GL95 Info Li-Ion Battery BP-M50/M100 Ni-MH Battery BC-M150 Battery Charger BC-M50 Battery Charger SRW-5500 HDCAM SR Digital Recorder (p72-73) RM-B150 Remote Control Unit RM-B750 Remote Control Unit

HDC-1500 Portable HD Camera (p36-37)

Sony HD Product Guide VIDEO RECORDERS / PLAYERS - HDCAM SR 75

Speciﬁcations (SRW-1 / SRPC-1)

General Time-code output Power requirements BNC x 1, 1.0 Vp-p (75 kΩ), 2.2 Vp-p (10 kΩ) DC +12 V (DC +11 to +17 V) Phones Operating temperature Stereo mini jack x 2 -17 dBu 0 °C to +40 °C Remote input Storage temperature D-sub 9-pin (female), Sony 9-pin remote interface -20 °C to +60 °C Humidity Digital video performance Sampling frequency 25 % to 80 % (relative humidity) Y: 74.25 MHz, Pb/Pr: 37.125 MHz Mass G: 74.25 MHz, B: 74.25 MHz, R: 74.25 MHz 8.5 kg Quantization Dimensions (W x H x D) 10 bits/sample 279 x 399 x 139 mm Compression Recording format MPEG-4 Studio Proﬁle HDCAM-SR Channel coding Recording/Playback time S-NRZ Normal speed recording: Error correction 50 min. with BCT-40SR cassette (24P mode) Reed-Solomon code Double speed recording: 25 min. with BCT-40SR cassette (24P mode) Digital audio performance Fast forward/rewind time Sampling frequency 5 min. 48 kHz (synchronized with video) Fast forward/rewind speed Quantization ±11 times 24 bits/sample Search speed (Shuttle mode) Wow & ﬂutter ±11 times Below measurable level Input/Output signals Analogue audio performance (Playback with HD serial V/A input SRW5000) BNC x 2, Serial Digital (1.485 Gbps), Sampling frequency SMPTE-292M/SMPTE-372M/BTA-S004/ITU-R.BT709 24 bits/sample HD reference video input Frequency response BNC x 1, Tri Level Sync, 0.6 Vp-p, 75 Ω, 20 Hz to 20 kHz, +0.5 dB/-1.0 dB (reference level) sync negative Dynamic range SD reference video input More than 100 dB (1 kHz) BNC x 1, Black Burst, 0.286 Vp-p, 75 Ω, Distortion sync negative Less than 0.05 % (at 1 kHz, reference level) Digital audio input Crosstalk BNC x 2 (AES/EBU) Less than -80 dB (at 1 kHz, between any two channels) Analogue audio input XLR-3pin x 4 (female) Time code Input BNC x 1, 0.5 to 18 Vp-p, 10 kΩ HD serial V/A output BNC x 2, serial digital (1.485 Gbps), SMPTE-292M/SMPTE-372M/BTA-S004/ITU-R.BT709 HD serial V/A monitor output BNC x 1 (with character out), serial digital (1.485 Gbps), SMPTE-292M/BTA-S004/ITU-R.BT709 SD serial V/A monitor output BNC x 1 (with character out), D1 serial digital (270 Mbps), SMPTE-259M Digital audio output (ch1 to ch12) D-sub multi connector Analogue audio monitor output XLR-3pin x 2 (male) VIDEO RECORDERS / PLAYERS - HDCAM SR - HDCAM SR VIDEO RECORDERS / PLAYERS

HKSR-101 Optical Interface Board

The HKSR-101 Optical Interface Board is used with the SRW-1/SRPC-1 VTR Systems • Provides single ﬁbre connection between the SRW-1/SRPC-1 and the HDC-1500 digital 4:4:4 HD Camera system. VIDEO RECORDERS/PLAYERS - HDCAM SR

HKSR-5001 Format-Converter Board

Optional board for the SRW-5000 HDCAM-SR VTR: • Provides a wide range of format conversions, both up-conversion and down-conversion, from HD-SDI (both 1080 & 720) to SDI, and from 4:4:4 to 4:2:2 • 2-3 pull-down conversion capability • 1080/720P cross-conversion

HKSR-5002 Digital Betacam Processor Board

Optional board for the SRW-5000 HDCAM-SR VTR • Provides the SRW-5000 with the capability to playback Digital Betacam tapes for output in both HD and SD

HKSR-5003 RGB Processor Boards

Optional board for the SRW-5000 HDCAM-SR VTR • Provides the SRW-5000 with the capability to record and playback RGB (4:4:4) signals

RMM-110 Rack Mount Kit

The RMM-110 rack mount kit is designed for mounting HDW series studio VTRs into a 19” rack.

Sony HD Product Guide VIDEO RECORDERS/PLAYERS - HDCAM 77

VIDEO RECORDERS/PLAYERS - HDCAM

HDW-M2000P...... 78 HDW-M2100P...... 80 HDW-D2000...... 82 HDW-S2000...... 84 HDW-2000...... 86 HDW-S280...... 88 J-H1...... 90 J-H3...... 92

ACCESSORIES BC-L70...... 94 BC-M150...... 94 BKMW102...... 95 BKMW103...... 95 BKNW7000 series...... 95 BKP-L551...... 95 BP-GL95/GL65...... 96 HKDV900...... 96 HKDW101...... 97 HKDW102...... 97 HKJ101...... 97 MLB-1M-100...... 97 RCC5G...... 98 RM280...... 98 RMM131...... 98 VIDEO RECORDERS / PLAYERS - HDCAM - HDCAM VIDEO RECORDERS / PLAYERS HDW-M2000P HDCAM Multi-Format Recorder Player

The HDW-M2000P series provides the same reliability and operability inherited from the long established BETACAM series offering a powerful workhorse solution to HDTV environments as well as to current SDTV systems. Several innovative new functions have been added to better meet varying customer requirements. This latest addition to the HDCAM series, with its high quality, superb operability and added reliability is an economically well balanced solution for next generation ENG and EFP programming. • Metadata Support • Playbck of all Sony professional 1/2” tape formats • Built-in playback up-converter • Easy maintenance • High deﬁ nition picture quality with HDCAM format • Playback of HDCAM, Digital Betacam, MPEG IMX, Betacam SX, Betacam SP and Betacam • Wide array of signal formats • Compact design and low power consumption • Long recording time on a single cassette. • 1080i/59.94i,1080/50i switchable operation • User-friendly control panel • Versatile Interfaces Supplied Accessories Related Products Operation manual (1) Installation manual (1) HDW-F900R HDCAM Camcorder (p4)

Optional Accessories HKDW-101 Control Panel HKDW-102 SDTI Interface Board BKMW-102 Remote Control Unit BKMW-103 Control Panel Extension Kit HDW-750P HDCAM Camcorder (p6) RMM-131 Rack Mount Kit RCC-5G 9-pin Remote Cable HKDV-900 HD Digital Video Controller* BVR-50 Video Controller BCT-124HDL/64HDL/22HD HDCAM Tape Cassette BCT-HD12CL Cleaning Cassette BKNW-1000 Series, ISR ProxyTM Remote Monitoring and Maintenance Software HDW-730S HDCAM Camcorder (p8) MLB-1M-100 Memory Label (for Tele-File system) BKMW-102 Remote Control Unit

*To connect the HKDV-900 with the HDW-2000 Series VTRs, the optional video controller cable, RCC-1505H/1510H/1530H is required.

Sony HD Product Guide VIDEO RECORDERS/PLAYERS - HDCAM 79

Specifications Input/Output Digital video performance (HDW-M2000P) HD-SDI input Sampling frequency BNC x 1 (SMPTE 292M), Serial Digital Y: 74.25 MHz, R-Y/B-Y: 37.125 MHz General 1.485 Gb/s) Quantization Power requirements SDTI input (with optional HKDW-102 installed) 10 bit/sample (compression: 8 bit/sample) 100 to 240 V, 50/60 Hz BNC x 1 (SMPTE305M), 270 Mb/s Compression Power consumption Reference video input Coefficient recording system 220w BNC x 2 (with a loop-through), Tri-level sync, Channel coding Operating temperature 0.6 Vp-p, 75 Ω, sync negative or Black Burst S-I-NRZI PR-IV +5 to +40 °C (41 to 104 °F) or Composite, 0.3 Vp-p, 75 Ω, sync negative Error correction Storage temperature Digital audio input (CH 1/2, CH 3/4) Reed-Solomon code -20 to +60 °C (-4 to +140 °F) BNC x 2, AES/EBU Analogue component output per- Humidity Analogue audio input (CH 1/2/3/4/Cue) 25 to 90% XLR-3-pin type, female, x 5 formance Bandwidth Mass Low off: -60 dBu, high impedance, balanced Y: 0 to 5.75 MHz +0.5 dB/-2.0 dB, R-Y/B-Y: 0 23 kg High off: +4 dBu, high impedance, balanced to 2.75 MHz +0.5 dB/-2.0 dB Dimensions (W x H x D) High on: -4 dBm, 600 Ω termination, bal S/N ratio 427 x 174 x 544 mm anced 56 dB or more Tape speed Time code input K Factor (2T Pulse) HDCAM 96.7 mm/s (59.94i, 29.97PsF), XLR-3-pin type, female, x 1 (0.5 to 18 Vp- 1% or less 80.6 mm/s (50i, 25PsF), 77.4 mm/s (24PsF, p,10 kΩ, balanced) 23.98PsF) HD-SDI output Analogue composite output per- Digital BETACAM 96.7 mm/s BNC x 3 (SMPTE 292M including one char formance MPEG IMX 64.5 mm/s (525/59.94), 53.8 mm acter out), Serial Digital (1.485 Gb/s) Bandwidth (625/50) SDTI output (with optional HKDW-102 installed) Y: 0 to 5.75 MHz +0.5 dB/-2.0 dB, R-Y/B-Y: 0 BETACAM SX 59.6 mm/s BNC x 2 (SMPTE 305M), 270 Mb/s to 2.75 MHz +0.5 dB/-2.0 dB BETACAM/BETACAM SP 118.6 mm/s SDI output S/N ratio (525/59.94), 101.5 mm/s (625/50) BNC x 3 (SMPTE 259M including one char 53 dB or more HDCAM Record/playback time acter out), Serial Digital (270 Mb/s) Differential gain 124 minutes (59.94i, 29.97PsF, with BCT- Analogue composite output 2% or less 124HDL cassette) BNC x 3 (RS-170A, including one character Differential phase 149 minutes (50i, 25PsF, with BCT-124HDL out, one WFM out) 2% or less cassette) Y: 1.0 Vp-p, sync negative, Y/C delay 40 minutes (59.94i, 29.97PsF, with BCT- R-Y/B-Y: 0.7 Vp-p, 75 Ω 20 ns or less 40HD cassette) Analogue component output K Factor (2T Pulse) 48 minutes (50i, 25PsF, with BCT-40HD cas BNC x 3, for 1 set, 1.0 Vp-p, 75 Ω, sync 1% or less sette) negative Output SCH phase HDCAM playback time Digital audio output Based upon RS-170A/CCIR R.624-3 155 minutes (24PsF, 23.98PsF, with BCT- BNC x 4, AES/EBU Digital audio performance 124HDL cassette) (CH 1/2, CH 3/4, CH 5/6, CH 7/8) Sampling frequency 50 minutes (24PsF, 23.98PsF, with BCT- Analogue audio output (CH 1/2/3/4) 48 kHz (Syncronized with video) 40HD cassette) XLR-3-pin type, x 5, male, +4 dBm (600 Ω Quantization Fast forward/rewind time load), low impedance, balanced 20 bit/sample Approx. 3 minutes (with BCT-124HDL cas Time code output Wow & flutter sette) XLR-3-pin type, male, x 1 (2.2 Vp-p, low Below measurable level Search speed range (Shuttle mode) impedance, balanced) Headroom HDCAM Still to ±50 times normal speed Monitor output L/R 20 dB (or 18 dB selectable) playback (59.94i, 29.97PsF), Still to ±58 XLR-3-pin type, male, x 2 (+4 dBm at 600 Ω Emphasis (ON/OFF selectable in REC mode) times normal speed playback (50i, 25PsF), load, low impedance, balanced) T1=50 µs, T2=15 µs (on/off selectable in Still to ±60 times normal speed playback Headphones recording mode) (24PsF, 23.98PsF) JM-60 Stereo phone jack (-∞ to -12 dBu at 8 Digital BETACAM Still to ±50 times normal Ω load, unbalanced) Analogue audio output perform- speed playback Remote1 In ance MPEG IMX Still to ±78 times normal speed D-sub 9-pin, Sony 9-pin remote interface A/D quantization playback Remote1 Out 20 bit/sample BETACAM SX Still to ±78 times normal D-sub 9-pin, Sony 9-pin remote interface D/A quantization speed playback RS-232C 20 bit/sample BETACAM/BETACAM SP Still to ±35 times D-sub 9-pin Frequency response normal speed playback (525/59.94) Remote2 Parallel I/O 20 Hz to 20 kHz +0.5 dB/-1.0 dB (0 dB at 1 VIDEO RECORDERS / PLAYERS - HDCAM - HDCAM VIDEO RECORDERS / PLAYERS Still to ±42 times normal speed playback D-sub 50-pin kHz) (625/50) Video control Dynamic range Search speed range (Variable mode) D-sub 9-pin, D-sub 15-pin More than 95 dB (at 1 kHz, emphasis ON) HDCAM -1 to +2 times normal speed play Control panel Distortion back D-sub 15-pin Less than 0.05% (at 1 kHz, emphasis ON, Digital BETACAM -1 to +3 times normal Others reference level) speed playback “Memory Stick”™ slot, PCMCIA slot Crosstalk MPEG IMX -1 to +3 times normal speed Processor adjustment range Less than -80 dB (at 1 kHz, between any two playback Video level channels) BETACAM SX -1 to +2 times normal speed ±3 dB/∞ to +3 dB, selectable Cue Track playback Chroma level Sampling frequency BETACAM/BETACAM SP -1 to +3 times ±3 dB/∞ to +3 dB, selectable 100 Hz to 12 kHz ±3 dB normal speed playback Set up/black level S/N ratio Search speed range (Jog mode) ±3 IRE More than 45 dB (at 3% distortion level) Still to ±1 times normal speed playback Chroma phase/hue Distortion Servo lock time ±30° Less than 2% (T.H.D. at 1 kHz, reference 0.6 s or less (59.94i, 29.97PsF, from System sync phase level) standby on), 0.7 s or less (50i, 25PsF, ±15 µs Wow & flutter 24PsF, 23.98PsF, from standby on) System SC phase Less than 0.2% Load/unload time ±200 ns Erase ratio 6 s or less (both L and S cassettes) Y/C delay More than 60 dB ±100 ns HDW-M2100P HDCAM Multi-Format player

The HDW-M2100P is a compact and affordable HDCAM high-deﬁ nition videocassette player. Legacy playback of Digital Betacam, MPEG IMX, Betacam SX, Betacam SP and Betacam tapes is also offered. • Built-in up and down-converters • 1080/59.94i, 1080/50i, 1080/23.98PsF, 1080/24PsF, 1080/25PsF, 1080/29.97PsF playback • Long playback time of up to 124 minutes at 1080/59.94i or 149 minutes at 1080/50i on an L-size cassette • Versatile interfaces: HD SDI, SDI, analog component, analog composite (PAL/NTSC), digital audio (AES/EBU), analog audio, and audio monitor (2-ch, analog) outputs • High speed colour picture search • Dynamic Tracking playback • Digital jog sound • Dynamic Motion Control (DMC) playback • 1080/1035 line conversion • Shot mark handling • Selectable picture modes: Squeeze, letter box, and edge crop modes • Dolby-E/Dolby AC-3 support • Low power consumption of 220 W • User-friendly control panel Supplied Accessories Related Products Operation manual (1) Installation manual (1) HDW-F900R HDCAM Camcorder (p4)

Optional Accessories HKDW-101 Control Panel HKDW-102 SDTI Interface Board BKMW-102 Remote Control Unit BKMW-103 Control Panel Extension Kit RMM-131 Rack Mount Kit HDW-750P HDCAM Camcorder (p6) RCC-5G 9-pin Remote Cable HKDV-900 HD Digital Video Controller* BVR-50 Video Controller BCT-124HDL/64HDL/22HD HDCAM Tape Cassette BCT-HD12CL Cleaning Cassette BKNW-1000 Series, ISR ProxyTM Remote Monitoring and Maintenance Software HDW-730S HDCAM Camcorder (p8) MLB-1M-100 Memory Label (for Tele-File system) BKMW-102 Remote Control Unit

*To connect the HKDV-900 with the HDW-2000 Series VTRs, the optional video controller cable, RCC-1505H/1510H/1530H is required. Sony HD Product Guide VIDEO RECORDERS/PLAYERS - HDCAM 81

Specifications Quantization Input/Output 10 bit/sample (compression: 8 bit/sample) (HDW-M2100P) HD-SDI input Compression - Coefficient recording system General SDTI input (with optional HKDW-102 installed) Channel coding Power requirements - S-I-NRZI PR-IV 100 to 240 V, 50/60 Hz Reference video input Error correction Power consumption BNC x 2 (with a loop-through), Tri-level sync, Reed-Solomon code 220w 0.6 Vp-p, 75 Ω, sync Operating temperature negative or Black Burst or Composite, 0.3 Vp-p, Analogue component output per- +5 to +40 °C (41 to 104 °F) 75 Ω, sync negative formance Storage temperature Digital audio input (CH 1/2, CH 3/4) Bandwidth -20 to +60 °C (-4 to +140 °F) - Y: 0 to 5.75 MHz +0.5 dB/-2.0 dB, R-Y/B-Y: 0 Humidity Analogue audio input (CH 1/2/3/4/Cue) to 2.75 MHz +0.5 dB/-2.0 dB 25 to 90% - S/N ratio Mass Time code input 56 dB or more 23 kg XLR-3-pin type, female, x 1 (0.5 to 18 Vp- K Factor (2T Pulse) Dimensions (W x H x D) p,10 kΩ, balanced) 1% or less 427 x 174 x 544 mm HD-SDI output Analogue composite output per- Tape speed BNC x 3 (SMPTE 292M including one char HDCAM 96.7 mm/s (59.94i, 29.97PsF), acter out), Serial Digital (1.485 Gb/s) formance 80.6 mm/s (50i, 25PsF), 77.4 mm/s SDTI output (with optional HKDW-102 installed) Bandwidth (24PsF, 23.98PsF) BNC x 2 (SMPTE 305M), 270 Mb/s Y: 0 to 5.75 MHz +0.5 dB/-2.0 dB, R-Y/B-Y: 0 Digital BETACAM 96.7 mm/s SDI output to 2.75 MHz +0.5 dB/-2.0 dB MPEG IMX 64.5 mm/s (525/59.94), 53.8 mm BNC x 3 (SMPTE 259M including one char S/N ratio (625/50) acter out), Serial Digital (270 Mb/s) 53 dB or more BETACAM SX 59.6 mm/s Analogue composite output Differential gain BETACAM/BETACAM SP 118.6 mm/s BNC x 3 (RS-170A, including one character 2% or less (525/59.94), 101.5 mm/s (625/50) out, one WFM out) Differential phase HDCAM Record/playback time Y: 1.0 Vp-p, sync negative, 2% or less 124 minutes (59.94i, 29.97PsF, with BCT- R-Y/B-Y: 0.7 Vp-p, 75 Ω Y/C delay 124HDL cassette) Analogue component output 20 ns or less 149 minutes (50i, 25PsF, with BCT-124HDL BNC x 3, for 1 set, 1.0 Vp-p, 75 Ω, sync K Factor (2T Pulse) cassette) negative 1% or less 40 minutes (59.94i, 29.97PsF, with BCT- Digital audio output Output SCH phase 40HD cassette) BNC x 4, AES/EBU Based upon RS-170A/CCIR R.624-3 48 minutes (50i, 25PsF, with BCT-40HD cas (CH 1/2, CH 3/4, CH 5/6, CH 7/8) Digital audio performance sette) Analogue audio output (CH 1/2/3/4) Sampling frequency HDCAM playback time XLR-3-pin type, x 5, male, +4 dBm (600 Ω 48 kHz (Syncronized with video) 155 minutes (24PsF, 23.98PsF, with BCT- load), low impedance, balanced Quantization 124HDL cassette) Time code output 20 bit/sample 50 minutes (24PsF, 23.98PsF, with BCT- XLR-3-pin type, male, x 1 (2.2 Vp-p, low Wow & flutter 40HD cassette) impedance, balanced) Below measurable level Fast forward/rewind time Monitor output L/R Headroom Approx. 3 minutes (with BCT-124HDL cas XLR-3-pin type, male, x 2 (+4 dBm at 600 Ω 20 dB (or 18 dB selectable) sette) load, low impedance, balanced) Emphasis (ON/OFF selectable in REC mode) Search speed range (Shuttle mode) Headphones T1=50 µs, T2=15 µs (on/off selectable in HDCAM Still to ±50 times normal speed JM-60 Stereo phone jack (-∞ to -12 dBu at 8 recording mode) playback (59.94i, 29.97PsF), Still to ±58 Ω load, unbalanced) Analogue audio output perform- times normal speed playback (50i, 25PsF), Remote1 In Still to ±60 times normal speed playback D-sub 9-pin, Sony 9-pin remote interface ance A/D quantization (24PsF, 23.98PsF) Remote1 Out 20 bit/sample Digital BETACAM Still to ±50 times normal D-sub 9-pin, Sony 9-pin remote interface D/A quantization speed playback RS-232C 20 bit/sample MPEG IMX Still to ±78 times normal speed D-sub 9-pin Frequency response playback Remote2 Parallel I/O 20 Hz to 20 kHz +0.5 dB/-1.0 dB (0 dB at 1 BETACAM SX Still to ±78 times normal D-sub 50-pin kHz) speed playback Video control Dynamic range BETACAM/BETACAM SP Still to ±35 times D-sub 9-pin, D-sub 15-pin More than 95 dB (at 1 kHz, emphasis ON) normal speed playback (525/59.94) Control panel Distortion - HDCAM VIDEO RECORDERS / PLAYERS Still to ±42 times normal speed playback D-sub 15-pin Less than 0.05% (at 1 kHz, emphasis ON, (625/50) Others reference level) Search speed range (Variable mode) “Memory Stick”™ slot, PCMCIA slot Crosstalk HDCAM -1 to +2 times normal speed play Processor adjustment range Less than -80 dB (at 1 kHz, between any two back Video level channels) Digital BETACAM -1 to +3 times normal ±3 dB/∞ to +3 dB, selectable speed playback Chroma level Cue Track Sampling frequency MPEG IMX -1 to +3 times normal speed ±3 dB/∞ to +3 dB, selectable 100 Hz to 12 kHz ±3 dB playback Set up/black level S/N ratio BETACAM SX -1 to +2 times normal speed ±3 IRE More than 45 dB (at 3% distortion level) playback Chroma phase/hue Distortion BETACAM/BETACAM SP -1 to +3 times ±30° Less than 2% (T.H.D. at 1 kHz, reference normal speed playback System sync phase level) Search speed range (Jog mode) ±15 µs Wow & flutter Still to ±1 times normal speed playback System SC phase Less than 0.2% Servo lock time ±200 ns Erase ratio 0.6 s or less (59.94i, 29.97PsF, from Y/C delay - standby on), 0.7 s or less (50i, 25PsF, ±100 ns 24PsF, 23.98PsF, from standby on) Load/unload time Digital video performance 6 s or less (both L and S cassettes) Sampling frequency Y: 74.25 MHz, R-Y/B-Y: 37.125 MHz HDW-D2000 HDCAM Multi-Format Recorder Player

The HDW 2000 series provides the same reliability and operability inherited from the long established BETACAM series offering a powerful workhorse solution to HDTV environments as well as to current SDTV systems. Several innovative new functions have been added to better meet varying customer requirements. This latest addition to the HDCAM series, with its high quality, superb operability and added reliability is an economically well balanced solution for next generation ENG and EFP programming. • Metadata Support • Easy maintenance • High deﬁ nition picture quality with HDCAM format • Playback of HDCAM, Digital Betacam and MPEG IMX • Wide array of signal formats • Compact design and low power consumption • Long recording time on a single cassette. • 1080i/59.94i,1080/50i switchable operation • User-friendly control panel • Versatile Interfaces

Supplied Accessories Related Products Operation manual (1) Installation manual (1) HDW-F900R HDCAM Camcorder (p4)

*To connect the HKDV-900 with the HDW-2000 Series VTRs, the optional video controller cable, RCC-1505H/1510H/1530H is required.

Sony HD Product Guide VIDEO RECORDERS/PLAYERS - HDCAM 83

Specifications 10 bit/sample (compression: 8 bit/sample) (HDW-D2000) Reference video input Compression General BNC x 2 (with a loop-through), Tri-level sync, Coefficient recording system 0.6 Vp-p, 75 Ω, sync negative or Black Burst Channel coding Power requirements or Composite, 0.3 Vp-p, 75 Ω, sync negative S-I-NRZI PR-IV 100 to 240 V, 50/60 Hz Digital audio input (CH 1/2, CH 3/4) Error correction Power consumption BNC x 2, AES/EBU Reed-Solomon code 220w Analogue audio input (CH 1/2/3/4/Cue) Operating temperature Analogue component output per- XLR-3-pin type, female, x 5 +5 to +40 °C (41 to 104 °F) Low off: -60 dBu, high impedance, balanced formance Storage temperature Bandwidth High off: +4 dBu, high impedance, balanced -20 to +60 °C (-4 to +140 °F) Y: 0 to 5.75 MHz +0.5 dB/-2.0 dB, R-Y/B-Y: 0 High on: -4 dBm, 600 Ω termination, bal Humidity to 2.75 MHz +0.5 dB/-2.0 dB anced 25 to 90% S/N ratio Time code input Mass 56 dB or more XLR-3-pin type, female, x 1 (0.5 to 18 Vp- 23 kg K Factor (2T Pulse) p,10 kΩ, balanced) Dimensions (W x H x D) 1% or less HD-SDI output 427 x 174 x 544 mm BNC x 3 (SMPTE 292M including one char Analogue composite output per- Tape speed acter out), Serial Digital (1.485 Gb/s) HDCAM 96.7 mm/s (59.94i, 29.97PsF), formance SDTI output (with optional HKDW-102 installed) 80.6 mm/s (50i, 25PsF), 77.4 mm/s (24PsF, Bandwidth BNC x 2 (SMPTE 305M), 270 Mb/s 23.98PsF) Y: 0 to 5.75 MHz +0.5 dB/-2.0 dB, R-Y/B-Y: 0 SDI output Digital BETACAM 96.7 mm/s to 2.75 MHz +0.5 dB/-2.0 dB BNC x 3 (SMPTE 259M including one char MPEG IMX 64.5 mm/s (525/59.94), 53.8 mm S/N ratio acter out), Serial Digital (270 Mb/s) (625/50) 53 dB or more Analogue composite output BETACAM SX --- Differential gain BNC x 3 (RS-170A, including one character BETACAM/BETACAM SP --- 2% or less out, one WFM out) HDCAM Record/playback time Differential phase Y: 1.0 Vp-p, sync negative, 124 minutes (59.94i, 29.97PsF, with BCT- 2% or less R-Y/B-Y: 0.7 Vp-p, 75 Ω 124HDL cassette) Y/C delay Analogue component output 149 minutes (50i, 25PsF, with BCT-124HDL 20 ns or less BNC x 3, for 1 set, 1.0 Vp-p, 75 Ω, sync cassette) K Factor (2T Pulse) negative 40 minutes (59.94i, 29.97PsF, with BCT- 1% or less Digital audio output 40HD cassette) Output SCH phase BNC x 4, AES/EBU 48 minutes (50i, 25PsF, with BCT-40HD cas Based upon RS-170A/CCIR R.624-3 (CH 1/2, CH 3/4, CH 5/6, CH 7/8) sette) Digital audio performance Analogue audio output (CH 1/2/3/4) HDCAM playback time Sampling frequency XLR-3-pin type, x 5, male, +4 dBm (600 Ω 155 minutes (24PsF, 23.98PsF, with BCT- 48 kHz (Syncronized with video) load), low impedance, balanced 124HDL cassette) Quantization Time code output 50 minutes (24PsF, 23.98PsF, with BCT- 20 bit/sample XLR-3-pin type, male, x 1 (2.2 Vp-p, low 40HD cassette) Wow & flutter impedance, balanced) Fast forward/rewind time Below measurable level Monitor output L/R Approx. 3 minutes (with BCT-124HDL cas Headroom XLR-3-pin type, male, x 2 (+4 dBm at 600 Ω sette) 20 dB (or 18 dB selectable) load, low impedance, balanced) Search speed range (Shuttle mode) Emphasis (ON/OFF selectable in REC mode) Headphones HDCAM Still to ±50 times normal speed T1=50 µs, T2=15 µs (on/off selectable in JM-60 Stereo phone jack (-∞ to -12 dBu at 8 playback (59.94i, 29.97PsF), Still to ±58 recording mode) Ω load, unbalanced) times normal speed playback (50i, 25PsF), Remote1 In Analogue audio output perform- Still to ±60 times normal speed playback D-sub 9-pin, Sony 9-pin remote interface (24PsF, 23.98PsF) ance Remote1 Out A/D quantization Digital BETACAM Still to ±50 times normal D-sub 9-pin, Sony 9-pin remote interface 20 bit/sample speed playback RS-232C D/A quantization MPEG IMX Still to ±78 times normal speed D-sub 9-pin 20 bit/sample playback Remote2 Parallel I/O Frequency response BETACAM SX --- D-sub 50-pin 20 Hz to 20 kHz +0.5 dB/-1.0 dB (0 dB at 1 BETACAM/BETACAM SP --- Video control kHz) Search speed range (Variable mode) D-sub 9-pin, D-sub 15-pin Dynamic range HDCAM -1 to +2 times normal speed play Control panel More than 95 dB (at 1 kHz, emphasis ON)

back - HDCAM VIDEO RECORDERS / PLAYERS D-sub 15-pin Distortion Digital BETACAM -1 to +3 times normal Others Less than 0.05% (at 1 kHz, emphasis ON, speed playback “Memory Stick”™ slot, PCMCIA slot reference level) MPEG IMX -1 to +3 times normal speed Crosstalk playback Processor adjustment range Less than -80 dB (at 1 kHz, between any two BETACAM SX --- Video level channels) BETACAM/BETACAM SP --- ±3 dB/∞ to +3 dB, selectable Search speed range (Jog mode) Chroma level Cue Track Still to ±1 times normal speed playback ±3 dB/∞ to +3 dB, selectable Sampling frequency Servo lock time Set up/black level 100 Hz to 12 kHz ±3 dB 0.6 s or less (59.94i, 29.97PsF, from ±3 IRE S/N ratio standby on), 0.7 s or less (50i, 25PsF, Chroma phase/hue More than 45 dB (at 3% distortion level) 24PsF, 23.98PsF, from standby on) ±30° Distortion Load/unload time System sync phase Less than 2% (T.H.D. at 1 kHz, reference 6 s or less (both L and S cassettes) ±15 µs level) Input/Output System SC phase Wow & ﬂutter ±200 ns Less than 0.2% HD-SDI input Y/C delay Erase ratio BNC x 1 (SMPTE 292M), Serial Digital --- More than 60 dB 1.485 Gb/s) SDTI input (with optional HKDW-102 installed) Digital video performance BNC x 1 (SMPTE305M), 270 Mb/s Sampling frequency Y: 74.25 MHz, R-Y/B-Y: 37.125 MHz Quantization HDW-S2000 HDCAM Multi-Format Recorder Player

The HDW 2000 series provides the same reliability and operability inherited from the long established BETACAM series offering a powerful workhorse solution to HDTV environments as well as to current SDTV systems. Several innovative new functions have been added to better meet varying customer requirements. This latest addition to the HDCAM series, with its high quality, superb operability and added reliability is an economically well balanced solution for next generation ENG and EFP programming. • Metadata Support • Easy maintenance • High deﬁ nition picture quality with HDCAM format • Playback of HDCAM, Betacam SX, Betacam SP and Betacam • Wide array of signal formats • Compact design and low power consumption • Long recording time on a single cassette. • 1080i/59.94i,1080/50i Switchable Operation • User-friendly control panel • Versatile Interfaces

Supplied Accessories Related Products Operation manual (1) Installation manual (1) HDW-F900R HDCAM Camcorder (p4)

*To connect the HKDV-900 with the HDW-2000 Series VTRs, the optional video controller cable, RCC-1505H/1510H/1530H is required.

Sony HD Product Guide VIDEO RECORDERS/PLAYERS - HDCAM 85

Reference video input Channel coding Specifications BNC x 2 (with a loop-through), Tri-level sync, S-I-NRZI PR-IV (HDW-S2000) 0.6 Vp-p, 75 Ω, sync negative or Black Burst Error correction or Composite, 0.3 Vp-p, 75 Ω, sync negative Reed-Solomon code General Digital audio input (CH 1/2, CH 3/4) Analogue component output per- BNC x 2, AES/EBU Power requirements Analogue audio input (CH 1/2/3/4/Cue) formance 100 to 240 V, 50/60 Hz Bandwidth XLR-3-pin type, female, x 5 Power consumption Y: 0 to 5.75 MHz +0.5 dB/-2.0 dB, R-Y/B-Y: 0 Low off: -60 dBu, high impedance, balanced 220w to 2.75 MHz +0.5 dB/-2.0 dB High off: +4 dBu, high impedance, balanced Operating temperature S/N ratio High on: -4 dBm, 600 Ω termination, bal +5 to +40 °C (41 to 104 °F) 56 dB or more anced Storage temperature K Factor (2T Pulse) Time code input -20 to +60 °C (-4 to +140 °F) 1% or less XLR-3-pin type, female, x 1 (0.5 to 18 Vp- Humidity p,10 kΩ, balanced) Analogue composite output per- 25 to 90% HD-SDI output Mass formance BNC x 3 (SMPTE 292M including one char 23 kg Bandwidth acter out), Serial Digital (1.485 Gb/s) Dimensions (W x H x D) Y: 0 to 5.75 MHz +0.5 dB/-2.0 dB, R-Y/B-Y: 0 SDTI output (with optional HKDW-102 installed) 427 x 174 x 544 mm to 2.75 MHz +0.5 dB/-2.0 dB BNC x 2 (SMPTE 305M), 270 Mb/s Tape speed S/N ratio SDI output HDCAM 96.7 mm/s (59.94i, 29.97PsF), 53 dB or more BNC x 3 (SMPTE 259M including one char 80.6 mm/s (50i, 25PsF), 77.4 mm/s (24PsF, Differential gain acter out), Serial Digital (270 Mb/s) 23.98PsF) 2% or less Analogue composite output Digital BETACAM --- Differential phase BNC x 3 (RS-170A, including one character MPEG IMX --- 2% or less out, one WFM out) BETACAM SX 59.6 mm/s Y/C delay Y: 1.0 Vp-p, sync negative, BETACAM/BETACAM SP 118.6 mm/s 20 ns or less R-Y/B-Y: 0.7 Vp-p, 75 Ω (525/59.94), 101.5 mm/s (625/50) K Factor (2T Pulse) Analogue component output HDCAM Record/playback time 1% or less BNC x 3, for 1 set, 1.0 Vp-p, 75 Ω, sync 124 minutes (59.94i, 29.97PsF, with BCT- Output SCH phase negative 124HDL cassette) Based upon RS-170A/CCIR R.624-3 Digital audio output 149 minutes (50i, 25PsF, with BCT-124HDL Digital audio performance BNC x 2, AES/EBU (CH 1/2, CH 3/4) cassette) Sampling frequency Analogue audio output (CH 1/2/3/4) 40 minutes (59.94i, 29.97PsF, with BCT- 48 kHz (Syncronized with video) XLR-3-pin type, x 5, male, +4 dBm (600 Ω 40HD cassette) Quantization load), low impedance, balanced 48 minutes (50i, 25PsF, with BCT-40HD cas 20 bit/sample Time code output sette) Wow & flutter XLR-3-pin type, male, x 1 (2.2 Vp-p, low HDCAM playback time Below measurable level impedance, balanced) 155 minutes (24PsF, 23.98PsF, with BCT- Headroom Monitor output L/R 124HDL cassette) 20 dB (or 18 dB selectable) XLR-3-pin type, male, x 2 (+4 dBm at 600 Ω 50 minutes (24PsF, 23.98PsF, with BCT- Emphasis (ON/OFF selectable in REC mode) load, low impedance, balanced) 40HD cassette) T1=50 µs, T2=15 µs (on/off selectable in Headphones Fast forward/rewind time recording mode) JM-60 Stereo phone jack (-∞ to -12 dBu at 8 Approx. 3 minutes (with BCT-124HDL cas Ω load, unbalanced) Analogue audio output perform- sette) Remote1 In Search speed range (Shuttle mode) ance D-sub 9-pin, Sony 9-pin remote interface A/D quantization HDCAM Still to ±50 times normal speed Remote1 Out 20 bit/sample playback (59.94i, 29.97PsF), Still to ±58 D-sub 9-pin, Sony 9-pin remote interface D/A quantization times normal speed playback (50i, 25PsF), RS-232C 20 bit/sample Still to ±60 times normal speed playback D-sub 9-pin Frequency response (24PsF, 23.98PsF) Remote2 Parallel I/O 20 Hz to 20 kHz +0.5 dB/-1.0 dB (0 dB at 1 Digital BETACAM --- D-sub 50-pin kHz) MPEG IMX --- Video control Dynamic range BETACAM SX Still to ±78 times normal D-sub 9-pin, D-sub 15-pin More than 95 dB (at 1 kHz, emphasis ON) speed playback Control panel Distortion BETACAM/BETACAM SP Still to ±35 times D-sub 15-pin Less than 0.05% (at 1 kHz, emphasis ON, normal speed playback (525/59.94) Others reference level) Still to ±42 times normal speed playback “Memory Stick”™ slot, PCMCIA slot Crosstalk (625/50) Less than -80 dB (at 1 kHz, between any two Search speed range (Variable mode) Processor adjustment range channels) - HDCAM VIDEO RECORDERS / PLAYERS HDCAM -1 to +2 times normal speed play Video level back ±3 dB/∞ to +3 dB, selectable Cue Track Digital BETACAM --- Chroma level Sampling frequency MPEG IMX --- ±3 dB/∞ to +3 dB, selectable 100 Hz to 12 kHz ±3 dB BETACAM SX -1 to +2 times normal speed Set up/black level S/N ratio playback ±3 IRE More than 45 dB (at 3% distortion level) BETACAM/BETACAM SP -1 to +3 times Chroma phase/hue Distortion normal speed playback ±30° Less than 2% (T.H.D. at 1 kHz, reference Search speed range (Jog mode) System sync phase level) Still to ±1 times normal speed playback ±15 µs Wow & flutter Servo lock time System SC phase Less than 0.2% 0.6 s or less (59.94i, 29.97PsF, from ±200 ns Erase ratio standby on), 0.7 s or less (50i, 25PsF, Y/C delay More than 60 dB 24PsF, 23.98PsF, from standby on) ±100 ns Load/unload time Digital video performance 6 s or less (both L and S cassettes) Sampling frequency Input/Output Y: 74.25 MHz, R-Y/B-Y: 37.125 MHz HD-SDI input Quantization BNC x 1 (SMPTE 292M), Serial Digital 10 bit/sample (compression: 8 bit/sample) 1.485 Gb/s) Compression SDTI input (with optional HKDW-102 installed) Coefficient recording system BNC x 1 (SMPTE305M), 270 Mb/s HDW-2000 HDCAM Recorder Player

The HDW 2000 series provides the same reliability and operability inherited from the long established BETACAM series offering a powerful workhorse solution to HDTV environments as well as to current SDTV systems. Several innovative new functions have been added to better meet varying customer requirements. This latest addition to the HDCAM series, with its high quality, superb operability and added reliability is an economically well balanced solution for next generation ENG and EFP programming. • Metadata Support • Easy maintenance • High deﬁ nition picture quality with HDCAM format • Wide array of signal formats • Compact design and low power consumption • Long recording time on a single cassette. • 1080i/59.94i,1080/50i switchable operation • User-friendly control panel • Versatile Interfaces

Supplied Accessories Related Products Operation manual (1) HDW-F900R HDCAM Camcorder (p4) Installation manual (1)

Optional Accessories HKDW-101 Control Panel HKDW-102 SDTI Interface Board BKMW-102 Remote Control Unit BKMW-103 Control Panel Extension Kit HDW-750P HDCAM Camcorder (p6) RMM-131 Rack Mount Kit RCC-5G 9-pin Remote Cable HKDV-900 HD Digital Video Controller* BVR-50 Video Controller BCT-124HDL/64HDL/22HD HDCAM Tape Cassette BCT-HD12CL Cleaning Cassette BKNW-1000 Series, ISR ProxyTM Remote HDW-730S HDCAM Camcorder (p8) Monitoring and Maintenance Software MLB-1M-100 Memory Label (for Tele-File system) BKMW-102 Remote Control Unit

*To connect the HKDV-900 with the HDW-2000 Series VTRs, the optional video controller cable, RCC-1505H/1510H/1530H is required.

Sony HD Product Guide VIDEO RECORDERS/PLAYERS - HDCAM 87

Speciﬁcations (HDW-2000)

General SDI output Analogue composite output per- Power requirements BNC x 3 (SMPTE 259M including one char formance 100 to 240 V, 50/60 Hz acter out), Serial Digital (270 Mb/s) Bandwidth Power consumption Analogue composite output Y: 0 to 5.75 MHz +0.5 dB/-2.0 dB, R-Y/B-Y: 0 220w BNC x 3 (RS-170A, including one character to 2.75 MHz +0.5 dB/-2.0 dB Operating temperature out, one WFM out) S/N ratio +5 to +40 °C (41 to 104 °F) Y: 1.0 Vp-p, sync negative, 53 dB or more Storage temperature R-Y/B-Y: 0.7 Vp-p, 75 Ω Differential gain -20 to +60 °C (-4 to +140 °F) Analogue component output 2% or less Humidity BNC x 3, for 1 set, 1.0 Vp-p, 75 Ω, sync Differential phase 25 to 90% negative 2% or less Mass Digital audio output Y/C delay 23 kg BNC x 4, AES/EBU 20 ns or less Dimensions (W x H x D) (CH 1/2, CH 3/4, CH 5/6, CH 7/8) K Factor (2T Pulse) 427 x 174 x 544 mm Analogue audio output (CH 1/2/3/4) 1% or less Tape speed XLR-3-pin type, x 5, male, +4 dBm (600 Ω Output SCH phase HDCAM 96.7 mm/s (59.94i, 29.97PsF), load), low impedance, balanced Based upon RS-170A/CCIR R.624-3 80.6 mm/s (50i, 25PsF), 77.4 mm/s Time code output (24PsF, 23.98PsF) Digital audio performance XLR-3-pin type, male, x 1 (2.2 Vp-p, low Sampling frequency HDCAM Record/playback time impedance, balanced) 124 minutes (59.94i, 29.97PsF, with BCT- 48 kHz (Syncronized with video) Monitor output L/R Quantization 124HDL cassette) XLR-3-pin type, male, x 2 (+4 dBm at 600 Ω 149 minutes (50i, 25PsF, with BCT-124HDL 20 bit/sample load, low impedance, balanced) Wow & ﬂutter cassette) Headphones 40 minutes (59.94i, 29.97PsF, with BCT- Below measurable level JM-60 Stereo phone jack (-∞ to -12 dBu at 8 Headroom 40HD cassette) Ω load, unbalanced) 48 minutes (50i, 25PsF, with BCT-40HD cas- 20 dB (or 18 dB selectable) Remote1 In Emphasis (ON/OFF selectable in REC mode) sette) D-sub 9-pin, Sony 9-pin remote interface HDCAM playback time T1=50 µs, T2=15 µs (on/off selectable in Remote1 Out recording mode) 155 minutes (24PsF, 23.98PsF, with BCT- D-sub 9-pin, Sony 9-pin remote interface 124HDL cassette) RS-232C Analogue audio output performance 50 minutes (24PsF, 23.98PsF, with BCT- D-sub 9-pin A/D quantization 40HD cassette) Remote2 Parallel I/O 20 bit/sample Fast forward/rewind time D-sub 50-pin D/A quantization Approx. 3 minutes (with BCT-124HDL cas- Video control 20 bit/sample sette) D-sub 9-pin, D-sub 15-pin Frequency response Search speed range (Shuttle mode) Control panel 20 Hz to 20 kHz +0.5 dB/-1.0 dB (0 dB at 1 HDCAM Still to ±50 times normal speed D-sub 15-pin kHz) playback (59.94i, 29.97PsF), Still to ±58 Others Dynamic range times normal speed playback (50i, 25PsF), “Memory Stick”™ slot, PCMCIA slot More than 95 dB (at 1 kHz, emphasis ON) Still to ±60 times normal speed playback Distortion (24PsF, 23.98PsF) Processor adjustment range Less than 0.05% (at 1 kHz, emphasis ON, Video level Search speed range (Variable mode) reference level) ±3 dB/∞ to +3 dB, selectable HDCAM -1 to +2 times normal speed play- Crosstalk Chroma level back Less than -80 dB (at 1 kHz, between any two ±3 dB/∞ to +3 dB, selectable Search speed range (Jog mode) channels) Set up/black level Still to ±1 times normal speed playback ±3 IRE Cue Track Servo lock time Chroma phase/hue Sampling frequency 0.6 s or less (59.94i, 29.97PsF, from ±30° 100 Hz to 12 kHz ±3 dB standby on), 0.7 s or less (50i, 25PsF, System sync phase S/N ratio 24PsF, 23.98PsF, from standby on) ±15 µs More than 45 dB (at 3% distortion level) Load/unload time System SC phase Distortion 6 s or less (both L and S cassettes) ±200 ns Less than 2% (T.H.D. at 1 kHz, reference Input/Output Y/C delay level) HD-SDI input --- Wow & ﬂutter BNC x 1 (SMPTE 292M), Serial Digital Less than 0.2% 1.485 Gb/s) Digital video performance Erase ratio

Sampling frequency - HDCAM VIDEO RECORDERS / PLAYERS SDTI input (with optional HKDW-102 installed) More than 60 dB Y: 74.25 MHz, R-Y/B-Y: 37.125 MHz BNC x 1 (SMPTE305M), 270 Mb/s Quantization Reference video input 10 bit/sample (compression: 8 bit/sample) BNC x 2 (with a loop-through), Tri-level sync, Compression 0.6 Vp-p, 75 Ω, sync negative or Black Burst Coefﬁcient recording system or Composite, 0.3 Vp-p, 75 Ω, sync negative Channel coding Digital audio input (CH 1/2, CH 3/4) S-I-NRZI PR-IV BNC x 2, AES/EBU Error correction Analogue audio input (CH 1/2/3/4/Cue) Reed-Solomon code XLR-3-pin type, female, x 5 Low off: -60 dBu, high impedance, balanced Analogue component output per- High off: +4 dBu, high impedance, balanced formance High on: -4 dBm, 600 Ω termination, bal- Bandwidth anced Y: 0 to 5.75 MHz +0.5 dB/-2.0 dB, R-Y/B-Y: 0 Time code input to 2.75 MHz +0.5 dB/-2.0 dB XLR-3-pin type, female, x 1 (0.5 to 18 Vp- S/N ratio p,10 kΩ, balanced) 56 dB or more HD-SDI output K Factor (2T Pulse) BNC x 3 (SMPTE 292M including one char 1% or less acter out), Serial Digital (1.485 Gb/s) SDTI output (with optional HKDW-102 installed) BNC x 2 (SMPTE 305M), 270 Mb/s HDW-S280 Compact HDCAM Recorder

Sony has now introduced the HDW-S280 compact recorder – the ﬁ rst affordable HDCAM deck to offer 24P-recording capability. Packed into a compact half-rack-wide chassis only 3U high, the HDW-S280 recorder provides an as- sortment of features, such as interlace/progressive switchable recording with selectable frame rates, legacy playback of Betacam SX, Betacam SP and Betacam tapes, and up-/down-conversion capabilities. • High-deﬁ nition pictures using the HDCAM format • Interlace/progressive switchable recording and playback of multiple frame rates including 1080/59.94i, 1080/50i, 1080/29.97PsF, 1080/25PsF, 1080/24PsF and 1080/23.98PsF • Powerful legacy playback capability: Betacam SX, Betacam SP and Betacam formats • Up- and down-conversion capabilities with selectable picture modes (squeeze, letter box, edge crop) • Highly compact and portable design • User-friendly control panel design • Equipped with a 3.5-inch type colour 16:9 LCD screen on the control panel • AC/DC or battery-powered operation

Supplied Accessories Related Products Operation manual (1) HDW-F900R HDCAM Camcorder (p4) Installation manual (1) Connector cap (1)

Optional Accessories BCT-6HD/12HD/22HD/32HD/40HD, HDCAM Tape Cassette RM-280 Editing Controller HDW-750P HDCAM Camcorder (p6) BCT-HD12CL Cleaning Cassette RCC-5G 9-pin Remote Cable HKDV-900 HD Digital Video Controller BKP-L551 Battery Adaptor BP-GL95/GL65 Lithium-ion Battery Pack BC-M150 Battery Charger BC-L70 Battery Charger HDW-730S HDCAM Camcorder (p8) BP-M100/M50 Nickel Metal Hydride Battery Pack

Sony HD Product Guide VIDEO RECORDERS/PLAYERS - HDCAM 89

XLR-3-pin type, male x 2, +4 dBm D/A quantization Y: 30 Hz to 4.1 MHz Specifications (600 Ω load), low impedance, 20 bit/sample +0.5 dB/-6.0 DB (HDW-S280) balanced Cue track R-Y/B-Y: 30 Hz to 1.5 MHz Headphones Frequency response +0.5 dB/-3.0 dB General JM-60 Stereo phone jack (-∞ to 20 Hz to 20 kHz +0.5 dB/-1.0 dB S/N ratio -12 dBu at 8 Ω load, unbalanced) Y: 48 dB or more Power requirements (0 dB at 1 kHz) Remote (RS-422) R-Y/B-Y: 45 dB or more 100 to 240 V, 50/60 Hz Dynamic range D-sub 9-pin, Sony 9-pin remote K-Factor (2T Pulse) Power consumption More than 90 dB (at 1 kHz, interface 3.5% or less 80 W (AC operation), 60 W (DC emphasis ON) Video control LF non-linearity operation) Distortion D-sub 9-pin Y: 3% or less Operating temperature Less than 0.08% (at 1 kHz, DC output R-Y/B-Y: 4% or less +5 to +40 °C emphasis ON, reference level) Round shape 4-pin, female x 1, Y/C delay Storage temperature Crosstalk for RM-280 or BVR-3 controller 20 ns or less -20 to +60 °C Less than -80 dB (at 1 kHz, Others Humidity between any two channels) Audio perfomance “Memory Stick” slot 25 to 80% Frequency response LNG Mass Processor adjustment 100 Hz to 10 kHz ±3 dB Frequency response 6 kg range S/N ratio 50 Hz to 15 kHz Dimensions (W x H x D) Video level More than 45 dB (at 3% distortion +1.5 dB/-3.0 dB 210 x 132 x 425 mm ±3 dB/∞ to +3 dB, selectable level) S/N ratio Tape speed Chroma level Distortion 50 dB or more (Dolby NR off) HDCAM: 96.7 mm/s (59.94i, ±3 dB/∞ to +3 dB, selectable Less than 2% (T.H.D. at 1 kHz, T.H.D. 29.97PsF), 80.6 mm/s (50i, Set up/black level reference level) 2 % or less 25PsF), 77.4 mm/s (24PsF, ±210 mV Wow & flutter Wow & flutter 23.98PsF) Chroma phase/hue Less than 0.2% 0.2% or less BETACAM SX: 59.6 mm/s ±30º Erase ratio Analogue BETACAM (PAL) More than 60 dB BETACAM/BETACAM SP: 118.6 System sync phase playback mm/s (59.94i), 101.5 mm (50i) ±15 µs BETACAM SX playback Video performance HDCAM Record/playback time System SC phase Video performance 40 minutes (59.94i, 29.97PsF, METAL TAPE ±200 ns Bandwidth with BCT- 40HD cassette) Bandwidth Y/C delay Y: NTSC: 0 to 4.5 MHz 48 minutes (50i, 25PsF, with BCT- Y: 25 Hz to 4.5 MHz ±100 ns +0.5 dB/-3.0 dB 40HD cassette) +0.5 dB/-4.0 dB Digital video performance PAL: 0 to 5.5 MHz 50 minutes (24PsF, 23.98PsF, R-Y/B-Y: 25 Hz to 1.5 MHz Sampling frequency +0.5 dB/-3.0 dB with BCT-40HD cassette) +0.5 dB/-3.0 dB Y: 74.25 MHz, R-Y/B-Y: 37.125 R-Y/B-Y: 0 to 2.0 MHz Fast forward/rewind time S/N ratio MHz +0.5 dB/-3.0 dB Approx. 4 minutes (fast-forward), Y: 48 dB or more Quantization S/N ratio 3 minutes (rewind) R-Y/B-Y: 48 dB or more 10 bit/sample (compression: 8 56 dB or more Search speed range K-Factor (2T Pulse) bit/sample) K factor (2T pulse) Shuttle mode: Still to ±10 times 2.5% or less Compression 1% or less normal speed playback LF non-linearity Coefficient recording system Jog mode: Still to ±1 time normal Audio perfomance Y: 3% or less Channel coding speed playback Frequency response R-Y/B-Y: 4% or less S-I-NRZI PR-IV Servo lock time 20 Hz to 20 kHz +0.5 dB/-1.0 dB Y/C delay Error correction 1.0 s or less (0 dB at 1 kHz) 20 ns or less Reed-Solomon code Load/unload time Dynamic range Audio perfomance 7 s or less Analogue composite 88 dB or more (at 1 kHz, LNG output performance emphasis ON) Frequency response Input/output Distortion HD-SDI input Bandwidth 50 Hz to 15 kHz 0.08% or less (at 1 kHz, empha- BNC x 1 (SMPTE 292M), Serial Y: 0 to 5.75 MHz +0.5 dB/-2.0 dB, +1.5 dB/-3.0 dB sis ON, reference level (+4 dBm)) Digital (1.485 Gb/s) R-Y/B-Y: 0 to 2.75 MHz +0.5 dB/- S/N ratio Reference video input 2.0 dB Analogue BETACAM 68 dB or more BNC x 2 (with a loop-through), S/N ratio (NTSC) playback T.H.D. Tri-level sync, 0.6 Vp-p, 75 Ω , 53 dB or more 1.5% or less Differential gain Video performance Wow & flutter sync negative or Black METAL TAPE 2% or less 0.2% or less Burst or Composite, 0.3 Vp-p, 75 Bandwidth Differential phase OXIDE TAPE Ω , sync negative Y: 30 Hz to 4.5 MHz 2% or less Bandwidth Analogue audio input (CH 1/2) +0.5 dB/-4.0 dB Y/C delay Y: 25 Hz to 4.1 MHz XLR-3-pin type, female x 2, +4/0/- R-Y/B-Y: 30 Hz to 1.5 MHz 20 ns or less +0.5 dB/-6.0 dB 3/-20/-60 dBu selectable, high +0.5 dB/-3.0 dB - HDCAM VIDEO RECORDERS / PLAYERS K Factor (2T Pulse) R-Y/B-Y: 25 Hz to 1.5 MHz impedance, balanced S/N ratio 1% or less +0.5 dB/-3.0 dB Timecode input Y: 51 dB or more Output SCH phase S/N ratio BNC x1 (0.5 to 18 Vp-p, 10 kΩ, R-Y/B-Y: 48 dB or more Based upon RS-170A/CCIR Y: 46 dB or more balanced) K-Factor (2T Pulse) R.624-3 R-Y/B-Y: 45 dB or more HD-SDI output 2% or less K-Factor (2T Pulse) BNC x 2 (SMPTE 292M), Serial Digital audio performance LF non-linearity 4% or less Digital (1.485 Gb/s) Sampling frequency Y: 3% or less LF non-linearity SD-SDI output 48 kHz (Syncronized with video) R-Y/B-Y: 4% or less Y: 3% or less BNC x 2 (SMPTE 259M including Quantization Y/C delay R-Y/B-Y: 4% or less one character out), Serial Digital 20 bit/sample 20 ns or less (270 Mb/s) Wow & flutter Y/C delay Analogue composite output Below measurable level Audio perfomance 20 ns or less LNG BNC x 2 (RS-170A, including one Headroom Audio perfomance Frequency response character out) 20/18/16/12 dB selectable LNG 50 Hz to15 kHz +1.5 dB/-3.0 dB Y: 1.0 Vp-p, sync negative, Emphasis Frequency response S/N ratio R-Y/B-Y: 0.7 Vp-p, 75 Ω (ON/OFF selectable in REC mode) 50 Hz to15 kHz 3.0 dB 72 dB or more Analogue audio output (CH 1/2) T1=50 µs, T2=15 µs (on/off S/N ratio T.H.D. XLR-3-pin type, male x 2, +4 dBm selectable in recording mode) 62 dB or more (Dolby NR off) 1.5% or less (600 Ω load), low impedance, T.H.D. Analogue audio Wow & flutter balanced 2% or less 0.2% or less Timecode output output performance Wow & flutter A/D quantization OXIDE TAPE BNC x1 (1.0 Vp-p, unbalanced) 0.2% or less 20 bit/sample Bandwidth Audio monitor output L/R J-H3 Compact HDCAM Player

Sharing the same design philosophy and physical dimensions of the existing J Series standard-deﬁ nition compact players, both the J-H1 and J-H3 are affordable, compact, lightweight and offer the same low-power-consumption characteristics. While the J-H1 is ideal for broadcast use and provides HDCAM playback at 59.94i, 50i, 25P, and 29.97P, the J-H3 is equipped with a number of additional features to support 24P production, and to complement the CineAlta series of VTRs. • Compact body design • Replay for both Small and Large HDCAM cassettes • RGB Computer Display Interface • Flexible Audio Outputs • Supports Tele-File • Supports 1080/59.94i, 50i and 1080/29.97P, 25P, 24P, 23.98P operation modes • Analogue HD and SD outputs • HD-SDI and SDI output • RS-422A interface • Reference Input (SD/HD switchable) • LTC output • i.Link interface option

Supplied Accessories Operation manual (CD-ROM) Quick operation guide Vertical stand (x 2) Infra-red remote controller

Optional Accessories HKJ-101 i.LINK interface board

Sony HD Product Guide VIDEO RECORDERS/PLAYERS - HDCAM 91

Speciﬁcations (J-H3)

General H-Frequency Power requirements 48.4 kHz AC 100 V to 240 V 50/60 Hz Power consumption SD Composite response Output level 60 W Y: 59.94i: 714 mV (±5 %), 50i: 700 mV (±5 %) Operating temperature Sync: 59.94i: 286 mV (±5 %), 50i: 300 mV (± 5%) +5 ˚C to +40 ˚C Burst: 59.94i: 286 mV (±5 %), 50i: 300 mV (±5 %) Storage temperature Bandwidth -20 ˚C to +60 ˚C 0.5 to 5.75 MHz + 0.5 dB/-3.0 dB Humidity S/N ratio 25 % to 80 % (relative humidity 56 dB or more Mass Y/C delay 7.5 kg 20 nsec or less Dimensions (W x H x D) K Factor (2T Pulse) 307 x 100 x 397 mm 1.0 % or less Tape speed HDCAM 96.7 mm/s (29.97 Hz) , 80.7 mm/s (25 Hz), 77.4 mm/s (24 Hz) Analogue Audio response Playback time Output level 124 min (29.97 Hz, with BCT-124HDL) XLR: +4±0.5 dBm, -20 dBFS, 600 Ω terminated 149 min (25 Hz, with BCT-124HDL) PIN: +10±0.5 dBu, -20 dBFS, 47 kΩ terminated 155 min (24 Hz, with BCT-124HDL) Frequency response Fast forward / Rewind time 20 Hz to 20 kHz + 1.0 dB/-1.5 dB Approx. 6 min with BCT-124HD Dynamic range Search speed (Shuttle mode) More than 85 dB (at 1 kHz, emphasis ON) Still to ±21 times normal speed playback Distortion Search speed (Jog mode) Less than 0.1 % (at 1 kHz/-20 dBFS, emphasis ON) Still to ±1 time normal speed playback Wow & ﬂutter Servo lock time Below measurable level 1 sec or less (from standby on) Cue Audio response Load/unload time Sampling frequency 7 sec or less 100 Hz to 10 kHz ±3.0 dB Inputs/Outputs S/N ratio Digital HD video More than 43.5 dB (3 % distortion level ) BNC x 1, SMPTE-292M Distortion Digital SD Video Less than 2 % (T.H.D. at 1kHz, reference level ) BNC x 1, SMPTE-259M Wow & ﬂutter Analogue HD video Less than 0.18 % BNC (x 3) Y: 0.7 vp-p, Pb/Pr: +/-0.7vp-p 75 Ω EIAJ RC-5237 connector, EIAJ CP-4120 standard Analogue SD video BNC (x 1), Pin jack (x 1), 1.0 Vp-p, 75 Ω Computer display D-sub 15 pin, XGA (1024 x 768 dots), RGB, 0.7 V i.LINK (Optional) IEEE1394 Timecode BNC x 1, SMPTE 12M Audio monitoring Pin jack (x 2): -10 dBu at 47 kΩ load, unbalanced XLR (male x 2) +4 dBm, 600 Ω load, low impedance, balanced Headphone JM-60 stereo phone jack, -∞ to -12 dBu at 8 Ω, unbalanced RS-232C D-sub 9 pin male (x 1) RS-422 D-sub 9 pin female (x 1), Sony 9-pin remote interface Wireless remote

BIRCS - HDCAM VIDEO RECORDERS / PLAYERS EXT SYNC BNC x 2 HD Analogue response Output level Y: 700 mV (±5 %) , Pb/Pr: 700 mV (±5 %) , Sync signal: 300 mV (±5 %) Bandwidth Y: 0 to 20 MHz + 1.0 dB / -3.0 dB , Pb/Pr: 0 to 7 MHz +1.0 dB / -3.0 dB S/N ratio 56 dB or more Output impedance Y, Pb, Pr: 75 Ω (±5 %) Y/C Delay Y, Pb, Pr: ±15 nsec or less XGA Analogue response Output level R: 700 mV (±5 %), G: 700 mV (±5 %), B: 700 mV (±5 %) Resolution XGA Refresh/rate 60 Hz J-H1 Compact HDCAM Player

Sharing the same design philosophy and physical dimensions of the existing J Series standard-deﬁ nition compact players, both the J-H1 and J-H3 are affordable, compact, lightweight and offer the same low-power-consumption characteristics. While the J-H1 is ideal for broadcast use and provides HDCAM playback at 59.94i, 50i, 25P, and 29.97P, the J-H3 is equipped with a number of additional features to support 24P production, and to complement the CineAlta series of VTRs. • Compact body design • Replay for Both Small and Large HDCAM cassettes • RGB Computer Display Interface • Flexible Audio Outputs • Supports Tele-File • Supports 1080/59.94i, 50i and 1080/29.97P, 25P operation modes • Analogue HD and SD Outputs • i.Link interface option

Supplied Accessories Operation manual (CD-ROM) Quick operation guide Vertical stand (x 2) Infra-red remote controller

Optional Accessories HKJ-101 i.LINK interface board

Sony HD Product Guide VIDEO RECORDERS/PLAYERS - HDCAM 93

Speciﬁcations (J-H1)

General H-Frequency Power requirements 48.4 kHz AC 100 V to 240 V 50/60 Hz Power consumption SD Composite response Output level 50 W Y: 59.94i: 714 mV (±5 %), 50i: 700 mV (±5 %) Operating temperature Sync: 59.94i: 286 mV (±5 %), 50i: 300 mV (± 5%) +5 ˚C to +40 ˚C Burst: 59.94i: 286 mV (±5 %), 50i: 300 mV (±5 %) Storage temperature Bandwidth -20 ˚C to +60 ˚C 0.5 to 5.75 MHz + 0.5 dB/-3.0 dB Humidity S/N ratio 25 % to 80 % (relative humidity 56 dB or more Mass Y/C delay 7.5 kg 20 nsec or less Dimensions (W x H x D) K Factor (2T Pulse) 307 x 100 x 397 mm 1.0 % or less Tape speed HDCAM 96.7 mm/s (29.97 Hz) , 80.7 mm/s (25 Hz) Analogue Audio response Playback time Output level 124 min (29.97 Hz, with BCT-124HDL) XLR: +4±0.5 dBm, -20 dBFS, 600 Ω terminated 149 min (25 Hz, with BCT-124HDL) PIN: +10±0.5 dBu, -20 dBFS, 47 kΩ terminated Fast forward / Rewind time Frequency response Approx. 6 min with BCT-124HD 20 Hz to 20 kHz + 1.0 dB/-1.5 dB Search speed (Shuttle mode) Dynamic range Still to ±21 times normal speed playback More than 85 dB (at 1 kHz, emphasis ON) Search speed (Jog mode) Distortion Still to ±1 time normal speed playback Less than 0.1 % (at 1 kHz/-20 dBFS, emphasis ON) Servo lock time Wow & ﬂutter 1 sec or less (from standby on) Below measurable level Load/unload time Cue Audio response 7 sec or less Sampling frequency Inputs/Outputs 100 Hz to 10 kHz ±3.0 dB Digital HD video S/N ratio --- More than 43.5 dB (3 % distortion level ) Digital SD Video Distortion --- Less than 2 % (T.H.D. at 1kHz, reference level ) Analogue HD video Wow & ﬂutter BNC (x 3) Y: 0.7 vp-p, Pb/Pr: +/-0.7vp-p 75 Ω Less than 0.18 % EIAJ RC-5237 connector, EIAJ CP-4120 standard Analogue SD video BNC (x 1), Pin jack (x 1), 1.0 Vp-p, 75 Ω Computer display D-sub 15 pin, XGA (1024 x 768 dots), RGB, 0.7 V i.LINK (Optional) IEEE1394 Timecode --- Audio monitoring Pin jack (x 2): -10 dBu at 47 kΩ load, unbalanced XLR (male x 2) +4 dBm, 600 Ω load, low impedance, balanced Headphone JM-60 stereo phone jack, -∞ to -12 dBu at 8 Ω, unbalanced RS-232C D-sub 9 pin male (x 1) RS-422 --- Wireless remote BIRCS EXT SYNC - HDCAM VIDEO RECORDERS / PLAYERS BNC x 2 HD Analogue response Output level Y: 700 mV (±5 %) , Pb/Pr: 700 mV (±5 %) , Sync signal: 300 mV (±5 %) Bandwidth Y: 0 to 20 MHz + 1.0 dB / -3.0 dB , Pb/Pr: 0 to 7 MHz +1.0 dB / -3.0 dB S/N ratio 56 dB or more Output impedance Y, Pb, Pr: 75 Ω (±5 %) Y/C Delay Y, Pb, Pr: ±15 nsec or less XGA Analogue response Output level R: 700 mV (±5 %), G: 700 mV (±5 %), B: 700 mV (±5 %) Resolution XGA Refresh/rate 60 Hz BCL-70 Li-ion Battery Charger

The BCL-70 charges up to two lithium-ion battery packs simultaneously. • Compact and lightweight • Charge progress indicator • Also doubles as a 100 w DC power supply (16.7 V)

Speciﬁcations

BCM-150 4 Station Charger for Li-ion and NiMh Batteries

The BC-M150 is a 4 station charger for all Sony V- Shoe type professional Lithium Ion and NiMH battery packs. It features fast and efﬁcient charging, and advanced monitoring of battery status. • Simultaneous charging of Lithium Ion, Graphite Lithium Ion and Nickle Metal Hydride, ‘V-Shoe’ Type professional batteries • Quick charge capability • Built in LCD status display monitor • Individual channel charge status LEDs • Refresh function • 4 Pin DC output connector Speciﬁcations

Sony HD Product Guide VIDEO RECORDERS/PLAYERS - HDCAM 95

BKMW-102 Remote Control Unit Control panel case for BKDW-101, BKMW-101 and HKDW-101

BKMW-103 Control Panel Extension Kit

Control panel extension kit for MSW-2000 series,DVW-2000 series and HDW-2000 series VTRs

BKNW-7000 Series Remote Monitoring and Maintenance Software VIDEO RECORDERS / PLAYERS - HDCAM - HDCAM VIDEO RECORDERS / PLAYERS BKP-L551 Battery Adaptor Lithium-Ion battery adaptor. BP-GL95/BP-GL65 Rechargeable Lithium-ion Battery Pack The new BP-GL65 Graphite Lithium Ion battery represents the latest generation of Sony battery technology. Replacing the BP-L40, the BP-GL65 has around 25% greater power capacity, yet is around the same size, weight and cost of the BP-L40. The BP-GL65 can be used with all current Lithium Ion battery chargers • Large capacity and light weight • Sony V-Shoe mounting mechanisim • Info function • 8 step, 2 colour LED display Speciﬁcations

Capacity Maximum voltage BP-GL95: 95Wh DC 16.8V BP-GL65: 65Wh Nominal voltage Weight DC 14.4V BP-GL95: 760g Operating temperature BP-GL65: 550g -10 to +45 Degrees Celcius Approx charge time BP-GL95: 190 minutes BP-GL65: 190 minutes

HKDV-900 HD Digital Video Controller The HKDV-900 digital video controller connects to HDW-2000 series and HDCAM SR VTRs and controls the HD/SD output video signals and the image enhancer of the down-converter built into these VTRs. The HKDV-900 can be connected to a maximum of four devices and only device can be controlled at a time. • Remote control of HKSP-313, HKSP-525 and HKSP-1125 HD peripheral boards • Installs in a 19” rack unit

Supplied Accessories PSW 4 x 16 screws, for rack mounting (4) Operation manual (1) Installation manual (1)

Speciﬁcations

General Power requirement 25 W or less Operating temperature 5 to 40 °C Storage temperature -20 to 60 °C Operating humidity 20 to 80% (no condensation) Dimensions (W x H x D) 424 x 43.6 x 171 mm Mass Approx. 2.9 kg

Sony HD Product Guide VIDEO RECORDERS/PLAYERS - HDCAM 97

HKDW-101 Remote Control Panel Remote control panel for HDW-2000 series VTRs

HKDW-102 SDTI Interface Board Adds SDTI (HDCAM) input and output capabilities to a HDW-2000 series VTR

HKJ-101 i.LINK Interface Board The HKJ-101 adds i.LINK capability to JH series VTRs

MLB-1M-100 Tele-File Memory Label A half inch tape label containing an IC memory for the storage of metadata VIDEO RECORDERS / PLAYERS - HDCAM - HDCAM VIDEO RECORDERS / PLAYERS The built-in IC memory stores up to 1 KB of information Data contained in the memory label is read and written with a Tele-File reader/writer or Tele-File reader/writer module built into speciﬁc professional camcorders/VTRs/Players. VIDEO RECORDERS/PLAYERS - HDCAM

RCC-G Control Cables

RCC-5G RCC-10G RCC-30G

9-pin (male) to 9-pin (male) cable/connector assembly.

Speciﬁcations

RCC-5G 5 m RCC-10G 10 m RCC-30G 30 m

RM-280 Editing Controller

The RM-280 is a compact editing controller intended for simple VTR remote control or basic two-machine editing. Using the Sony 9-pin protocol, the RM-280 can control up to two VTRs. • Multiple system frequencies including 29.97, 25, 24, and 23.98 Hz • Picture search using the jog/shuttle dial for jog, shuttle and variable-speed playback modes • Can be powered using the supplied AC adaptor or directly from a connected HDW-S280 HDCAM™ recorder from its DC output.

Supplied Accessories Operation manual (1) 9-pin/DC multi-cable (1) AC adaptor (1) Template (x3, for ten-key mode, XDCAM mode,DSR-DR1000A mode) connector cap (6)

Speciﬁcations

Power Requirements RM-280 speciﬁcations continued- DC 12 - 15 V Storage Temperature Power Consumption -20 to +60°C 5 W Connectors Mass RS-422A 9-pin remote x2 700 g (1 lb 9 oz) Reference video input and output* (BNC) x1 Dimensions (w x h x d) RS-232C x1 (for maintenance) 210 x 56 x 168 mm BNC for REC TALLY or cue signal output x1 Operating Temperature DC input x1 +5 to +40°C

RMM-131 Rack Mount Kit

Rack mount kit to suit HDW-2000 series VTRs.

Sony HD Product Guide VIDEO RECORDERS/PLAYERS - XDCAM HD 99

VIDEO RECORDERS/PLAYERS - XDCAM HD

PDW-F70...... 100 PDW-F30...... 102

ACCESSORIES PDBK-101...... 104 PDBK-102...... 104 PDBK-103...... 104 PDBK-104...... 104 VIDEO RECORDERS / PLAYERS - XDCAM HD VIDEO RECORDERS / PLAYERS PDW-F70 XDCAM HD Digital Video Recorder

The PDW-F70 XDCAM™ HD recording deck can record and playback 1080i video lines of multiple frame rates at a high bit rate of up to 35 Mb/s on Professional Disc™ media. The PDW-F70 XDCAM HD deck records and plays Professional Disc HD material at 1080/59.94i, 50i, 29.97P, 25P and native 23.98P using the “MPEG HD” codec that uses the industry standard MPEG-2 MP@HL compression. For high quality sound, four channel, 16 bit, 48 kHz uncompressed audio is used. The deck also can downconvert MPEG HD material to DV signals and output via the i.LINK™ interface. The PDW-F70 can also up-convert DVCAM material to HD signals and output via the HDSDI or HD analogue component connection. • MPEG HD recording at 35, 25 and 18 Mb/s via HD-SDI, HD analog component and RGB input (HD analog component and RGB input requires the optional PDBK-103 board) • Up-conversion recording (requires the optional PDBK-104 board): Input from SD-SDI or SD composite connectors can be recorded in the MPEG HD format. • Gigabit Ethernet capability for network-based ﬁle transfer (requires the optional PDBK-101 board) • A simple Remote Commander unit is supplied.

Supplied Accessories Related Products Operation manual (1) Vertical installation stand (1) PDW-F350 XDCAM HD Camcorder (p12) Infrared remote commander (1) , PDZ-1 Proxy Browsing Software (1) MXF Proxy Viewer software (1)

Optional Accessories PDBK-101 Network Board PDBK-102 MPEG-2 TS In/Out Board* PDBK-103 HD Analog Input Board PDBK-104 SD Input Up-Converter Board PDW-F330 XDCAM HD Camcorder (p14) RM-280 Editing Controller RCC-5G Remote Control Cable (5 m) VMC-IL4615B/IL4635B i.LINK Cable VMC-IL6615B/IL6635B i.LINK Cable PFD23 Professional Disc

Sony HD Product Guide VIDEO RECORDERS/PLAYERS - XDCAM HD 101

Speciﬁcations (PDW-F70)

General Audio monitor output Power requirements RCAx2 (L, R, Mix), -6dBu, 47 kΩ, unbalanced 100 V to 240 V AC, 50/60 Hz Headphone output Power consumption Stereo phone jack, -14dBu, 8 Ω, unbalanced 70 W Digital audio output Operating temperature AES/EBU, BNCx2, 4 channels +5 to +40 °C Timecode output Storage temperature BNCx1, SMPTE Timecode -20 to +60 °C Humidity Other inputs/outputs i.LINK 20 to 90% (relative humidity) IEEE1394, 6-pin x1, AV/C (DV stream output) or File Access Mode Mass i.LINK(HDV 1080i) (option: PDBK-102) 7.2 kg IEEE1394, 6-pin x1, HDV 1080i IN/OUT Dimensions (W x H x D) Ethernet (option: PDBK-101) 307 x 100 x 411 mm 1000Base-T (RJ-45) Recording format RS-422A Video: MPEG HD (MPEG-2 MP@HL) D-sub 9-pin x 1 HQ mode (VBR,maximum bit rate : 35 Mb/s), RS-232C SP mode (CBR, 25 Mb/s), D-sub 9-pin x 1 LP mode (VBR, maximum bit rate : 18 Mb/s) CONTROL Proxy Video: MPEG-4 Mini-jack 4-pin Audio: MPEG HD: 4 ch or 2 ch, 16 bits/48 kHz Proxy Audio: A-law (4 ch / 2 ch, 8 bit, 8 kHz) Video performance Playback format Sampling frequency Video: MPEG HD (MPEG-2 MP@HL): Y: 74.25MHz, R-Y/B-Y: 37.125MHz HQ mode (VBR, maximum bit rate : 35 Mb/s), Quantization SP mode (CBR, 25 Mb/s) 8 bits/sample LP mode (VBR, maximum bit rate : 18 Mb/s) Analog composite output(DV) Proxy Video: MPEG-4 Frequency response : 0 to 4.2 MHz +1.0/-3.0 dB (525), 0 to 4.8 MHz Audio: MPEG HD: 4 ch or 2 ch, 16 bits/48 kHz +1.0/-3.0 dB (625) S/N(Y) : 53 dB or more , Y/C delay (K2T) : ±25 ns DVCAM: 4 ch, 16 bit/48 kHz or less , K-factor(K2T) : 2% or less Proxy Audio: A-law (4 ch / 2 ch, 8 bit, 8 kHz) Processor adjustment range Recording/playback time Video level MPEG HD ±3 dB HQ mode: Audio 2ch : approx. 69 min. , Audio 4ch : approx. 66 min Chroma level SP mode: Audio 2ch : approx. 92 min. , Audio 4ch : approx. 87 min. ±3 dB LP mode: Audio 2ch : approx. 122 min. , Audio 4ch : approx. 113 Set up/black level min. ±30 IRE DVCAM Chroma phase Approx. 85 min. (playback only) ±30 deg Search speed (in colour) System sync phase Jog mode: ±1 time normal speed ±3 µs Variable Speed mode: ±1 time normal speed System sync phase (ﬁne) Shuttle mode: ±20 times normal speed ±200 ns Signal inputs Audio performance Analog reference input Sampling frequency BNCx2(including loop through), HD Tri-level sync or SD composite 48 kHz sync (0.3 Vp-p/75 Ω/sync negative) Quantization Analog composite input (option: PDBK-104) 16 bits/2 channels or 16 bits / 4 channels BNCx1, RS-170M Frequency response Analog HD component input (option: PDBK-103) 20 Hz to 20 kHz +0.5/-1.0 dB(0 dB at 1 kHz) BNC x4, Y/Pb/Pr/(Sync) or G/B/R/(Sync) Dynamic range HD-SDI input 90 dB or more BNCx1, SMPTE 292M Distortion SD-SDI input (option: PDBK-104) 0.05% or less (at 1 kHz) BNCx1, SMPTE 259M Headroom Analog audio input 20/18/16/12 dB (selectable) XLR x2 (channel selectable), +4/0/-3/-6 dBu (selectable),10 kΩ, balanced Digital audio input AES/EBU, BNCx2, 4 channels Timecode input BNCx1, SMPTE Time code VIDEO RECORDERS / PLAYERS - XDCAM HD VIDEO RECORDERS / PLAYERS Signal outputs Analog composite video output BNCx1, (1.0 Vp-p/75 Ω/sync negative) , RCA-pinx1,(1.0 Vp-p/75 Ω/sync negative) Monitor output D-sub 15-pin (G/B/R or Y/Pb/Pr) Built-in display 3.5-inch type colour LCD monitor HD-SDI output BNCx2, SMPTE 292M SD-SDI output BNCx1, SMPTE 259M Analog audio output XLRx2 (channel selectable), +4/0/-3/-6 dBu (selectable), 600 Ω load, balanced PDW-F30 XDCAM HD Digital Video Player

PDW-F30 XDCAM™ HD NLE feeder deck plays back 60i/50i and true 24P/25P/30P with compatible play back of variable frame rates. The PDW-F30 XDCAM™ HD player deck plays back Professional Disc™ media recorded in the MPEG HD format and can also down-convert this material to DV output. The deck will also play back DVCAM material and offers upconversion to HD output capability. An optional board also allows input and output of 25 Mb/s MPEG-2 TS (Transport Stream) for easy integration with HDV equipment and nonlinear editors. • Playback of MPEG HD and DVCAM material • Down-conversion output: MPEG HD playback can be converted to SD signals and output via the SD- SDI*,SD composite, and i.LINK (DV OUT) connectors. • Up-conversion output: DVCAM playback can be converted to 1080i HD signals and output via the HD connectors. • Thumbnail Search operation • Expand function • Scene Selection function for in-deck cuts-only editing** • Equipped with a Jog/Shuttle dial, providing VTR- like operation – Jog/Variable : ±1 time normal speed

Optional Accessories PDBK-101 Network Board PDBK-102 MPEG-2 TS In/Out Board* RCC-5G Remote Control Cable (5 m) VMC-IL4615B/IL4635B i.LINK Cable PDW-F330 XDCAM HD Camcorder (p14) VMC-IL6615B/IL6635B i.LINK Cable PFD23 Professional Disc

Sony HD Product Guide VIDEO RECORDERS/PLAYERS - XDCAM HD 103

Chroma level Speciﬁcations (PDW-F30) ±3 dB Set up/black level General ±30 IRE Power requirements Chroma phase 100 V to 240 V AC, 50/60 Hz ±30 deg Power consumption 70 W Audio performance Sampling frequency Operating temperature 48 kHz +5 to +40 °C Quantization Storage temperature 16 bits/2 channels or 16 bits / 4 channels -20 to +60 °C Frequency response Humidity 20 Hz to 20 kHz +0.5/-1.0 dB(0 dB at 1 kHz) 20 to 90% (relative humidity) Dynamic range Mass 90 dB or more 7.2 kg Distortion Dimensions (W x H x D) 0.05% or less (at 1 kHz) 307 x 100 x 411 mm Headroom Recording format 20/18/16/12 dB (selectable) Video: - Proxy Video: MPEG-4 Audio: - Proxy Audio: A-law (4 ch / 2 ch, 8 bit, 8 kHz) Playback format Video: MPEG HD (MPEG-2 MP@HL): HQ mode (VBR, maximum bit rate : 35 Mb/s), SP mode (CBR, 25 Mb/s) LP mode (VBR, maximum bit rate : 18 Mb/s) Proxy Video: MPEG-4 Audio: MPEG HD: 4 ch or 2 ch, 16 bits/48 kHz DVCAM: 4 ch, 16 bit/48 kHz Proxy Audio: A-law (4 ch / 2 ch, 8 bit, 8 kHz) Recording/playback time MPEG HD HQ mode: Audio 2ch : approx. 69 min. , Audio 4ch : approx. 66 min SP mode: Audio 2ch : approx. 92 min. , Audio 4ch : approx. 87 min. LP mode: Audio 2ch : approx. 122 min. , Audio 4ch : approx. 113 min. DVCAM Approx. 85 min. (playback only) Search speed (in colour) Jog mode: ±1 time normal speed Variable Speed mode: ±1 time normal speed Shuttle mode: ±20 times normal speed Signal outputs Analog composite video output BNCx1, (1.0 Vp-p/75 Ω/sync negative) , RCA-pinx1,(1.0 Vp-p/75 Ω/sync negative) Monitor output D-sub 15-pin (G/B/R or Y/Pb/Pr) Built-in display 3.5-inch type colour LCD monitor Analog audio output XLRx2 (channel selectable), +4/0/-3/-6 dBu (selectable), 600 Ω load, balanced Audio monitor output RCAx2 (L, R, Mix), -6dBu, 47 kΩ, unbalanced Headphone output Stereo phone jack, -14dBu, 8 Ω, unbalanced Other inputs/outputs i.LINK IEEE1394, 6-pin x1, AV/C (DV stream output) or File Access Mode i.LINK(HDV 1080i) (option: PDBK-102) IEEE1394, 6-pin x1, HDV 1080i IN/OUT Ethernet (option: PDBK-101)

1000Base-T (RJ-45) - XDCAM HD VIDEO RECORDERS / PLAYERS RS-422A D-sub 9-pin x 1 RS-232C D-sub 9-pin x 1 Video performance Sampling frequency Y: 74.25MHz, R-Y/B-Y: 37.125MHz Quantization 8 bits/sample Analog composite output(DV) Frequency response : 0 to 4.2 MHz +1.0/-3.0 dB (525), 0 to 4.8 MHz +1.0/-3.0 dB (625) S/N(Y) : 53 dB or more , Y/C delay (K2T) : ±25 ns or less , K-factor(K2T) : 2% or less Processor adjustment range Video level ±3 dB VIDEO RECORDERS/PLAYERS - XDCAM HD

PDBK-101 Network Board

The PDBK-101 option board provides a Gigabit Ethernet interface for the PDW-F70 and PDW-F30.

PDBK-102 TS Board

The PDBK-102 option board allows a 25 Mb/s HDV stream (MPEG-2 TS) to be input and output between the PDW-F70/F30 decks and an HDV device.

*Only one of the PDBK-102, PDBK-103 or PDBK-104 boards can be installed at any one time.

PDBK-103 Analogue HD Input Board

The PDBK-103 option board provides HD analogue component and RGB inputs for the PDW-F70 (these inputs share the same BNC connectors).

*Only one of the PDBK-102, PDBK-103 or PDBK-104 boards can be installed at any one time.

PDBK-104 SD Input Up-Conversion Board The PDBK-104 option board provides SD-SDI and SD composite inputs for the PDW-F70.

*Only one of the PDBK-102, PDBK-103 or PDBK-104 boards can be installed at any one time.

Sony HD Product Guide VIDEO RECORDERS / PLAYERS - HDV 105

VIDEO RECORDERS/PLAYERS - HDV

HVR-M25P...... 106 HVR-M15P...... 107 VIDEO RECORDERS / PLAYERS - HDV VIDEO RECORDERS / PLAYERS HVR-M25P HDV Digital Video Recorder

The HVR-M25P and M15P are the world’s ﬁrst HDV decks compatible with a standard size cassette tape and provide extended HDV1080i recording and playback times of up to 276 min. These VTRs feature switchable recording and playback capabilities between the HDV 1080i, DVCAM, and DV formats as well as a down-conversion capability for 1080i recording, providing full ﬂexibility to record in either SD or HD depending on individual production requirements. • HDV/DVCAM/DV compatible • Dual cassette-size mechanism • 2.7” 16:9 ”Clear Photo LCD plus” • HDMI output • DUPLICATE PLUS - This function makes it easy to copy video and audio from a VTR or camcorder onto the HVR-M25P - along with the original time code. • Edge crop adjust - When down-converting signals in the Edge Crop mode, the Edge Crop Adjust function is provided to adjust the edge crop position. • MARKER BURN • Counter set • Custom repeat • Time code settings • All scan mode

Supplied Accessories Related Products Remote Commander (RMT-DS5) (1) Power Cord (1) HVR-Z1P HDV Camcorder (p18) Size AA batteries (2) Cleaning Cassette (1) Operation Manual (1)

HVR-A1P HDV Camcorder (p20)

Sony HD Product Guide VIDEO RECORDERS / PLAYERS - HDV 107

Speciﬁcations (HVR-M25P)

Recording/playback performance Recording format 1080/60i, 1080/50i, 480/60i (NTSC), 576/50i (PAL) Playout/down conversion format 1080/60i, 1080/50i, 480/60i (NTSC), 576/50i (PAL), 480/60P, 576/50P, 720/60P, 720/50P Tape speed HDV/DV SP: Max. 18.812 mm/s DVCAM: Max. 28.218 mm/s Playback/recording time HDV/DV SP: Max. 276 min with PHDV-276DM cassette, Max. 63 min with PHDVM-63DM cassette DVCAM Max. 184 min with PHDV-276DM cassette, Max. 41 min with PHDVM-63DM cassette Fast forward/rewind time Approx. 2 min with PHDV-276DM cassette Input/output connectors/devices Video input/output BNC x 2, Video signal: 1 Vp-p, 75 Ω unbalanced, sync negative S-video input/output Mini-DIN 4-pin x 2 Y: 1 Vp-p, 75 Ω unbalanced, sync negative C: 0.286 Vp-p (NTSC), 0.3 Vp-p (PAL), 75 Ω unbalanced, Component video output BNC x 3 Y: 1 Vp-p (0.3 V, sync negative) Pr/Pb (Cr/Cb): 700 mVp-p (100% colour bar), input impedance 75 Ω i.LINK 4-pin HDMI output 19-pin (type A), video: 1080/60i, 1080/50i, 480/60i (NTSC), 576/50i (PAL), 720/60P, 720/50P, 480/60P, 576/50P, audio: PCM 48 kHz/16-bit Phones Stereo minijack (φ3.5 mm), 8 Ω loading LANC Stereo mini-minijack (φ2.5 mm) Control S Stereo minijack (φ3.5 mm) Audio input RCA pin x 2 Input level: -10/-2/+4 dBu, input impedance: min. 47 kΩ unbalanced, max. input level: -10: +18 dBu (approx. 6 Vrms), -2: +24 dBu (approx. 12.5 Vrms), +4: +30 dBu (approx. 25 Vrms) Audio output RCA pin x 2 Output level: -10 dBu (full bit -20 dB), impedance 47 kΩ, unbalanced in 60i mode, -10 dBu (full bit -18 dB), impedance 47 kΩ, unbalanced in 50i mode Impedance: max. 1 kΩ unbalanced LCD monitor 2.7-inch type, approx. 211,200 dots (960 x 220), Clear Photo LCD Plus General Mass Approx. 4.3 kg Power requirements AC 240 V, 50 Hz Power consumption 12 W (playback mode with LCD monitor on) Operating temperature 5 to 40°C Storage temperature -20 to +60°C Dimensions - HDV VIDEO RECORDERS / PLAYERS HVR-M15P HDV Digital Video Recorder

The HVR-M25P and M15P are the world’s ﬁrst HDV decks compatible with a standard size cassette tape and provide extended HDV1080i recording and playback times of up to 276 min. These VTRs feature switchable recording and playback capabilities between the HDV 1080i, DVCAM, and DV formats as well as a down-conversion capability for 1080i recording, providing full ﬂexibility to record in either SD or HD depending on individual production requirements. • HDV/DVCAM/DV compatible • Dual cassette-size mechanism • Down-conversion capabilities • Versatile I/O • HDV/DV IN TC • Colour bar/1KHz audio tone • 60/50Hz (PAL/NTSC) switchable • Multi-language menu • Compact & simple design • Adequate hard key/switch • Auto repeat • TC reset

Supplied Accessories Related Products Remote Commander (RMT-DS5) (1) AC Adaptor (AC-L15A) (1) HVR-Z1P HDV Camcorder (p18) AC Power Cord (1) Size AA batteries (2) Stand (1) Cleaning Cassette (1) Operation Manual (1)

HVR-A1P HDV Camcorder (p20)

Sony HD Product Guide VIDEO RECORDERS / PLAYERS - HDV 109

Speciﬁcations (HVR-M15P)

Recording/playback performance Recording format 1080/60i, 1080/50i, 480/60i (NTSC), 576/50i (PAL) Playout/down conversion format 1080/60i, 1080/50i, 480/60i (NTSC), 576/50i (PAL), 480/60P, 576/50P Tape speed HDV/DV SP: Max. 18.812 mm/s DVCAM: Max. 28.218 mm/s Playback/recording time HDV/DV SP: Max. 276 min with PHDV-276DM cassette, Max. 63 min with PHDVM-63DM cassette DVCAM Max. 184 min with PHDV-276DM cassette, Max. 41 min with PHDVM-63DM cassette Fast forward/rewind time Approx. 2 min with PHDV-276DM cassette Input/output connectors/devices Video input/output RCA pin x 2, Video signal: 1 Vp-p, 75 Ω unbalanced, sync negative S-video input/output Mini-DIN 4-pin x 2 Y: 1 Vp-p, 75 Ω unbalanced, sync negative C: 0.286 Vp-p (NTSC), 0.3 Vp-p (PAL), 75 Ω unbalanced, Component video output RCA pin x 3 Y: 1 Vp-p (0.3 V, sync negative) Pr/Pb (Cr/Cb): 700 mVp-p (100% colour bar), input impedance 75 Ω i.LINK 4-pin HDMI output N/A Phones N/A LANC Stereo mini-minijack (φ2.5 mm) Control S Stereo minijack (φ3.5 mm) Audio input RCA pin x 2 Input level: -10 dBu, input impedance: min. 10 kΩ unbalanced, max input level: +16 dBu (approx. 5 Vrms) in 60i mode, +14 dBu (approx. 4 Vrms) in 50i mode. Audio output RCA pin x 2 Output level: -10 dBu (full bit -20 dB), impedance 47 kΩ, unbalanced in 60i mode, -10 dBu (full bit -18 dB), impedance 47 kΩ, unbalanced in 50i mode Impedance: max. 1 kΩ unbalanced LCD monitor N/A General Mass Approx. 2.3 kg Power requirements DC 8.4 V Power consumption 8 W (playback mode) Operating temperature 5 to 40°C Storage temperature -20 to +60°C Dimensions VIDEO RECORDERS / PLAYERS - HDV VIDEO RECORDERS / PLAYERS Sony HD Product Guide DIGITAL PRODUCTION SWITCHERS 111

DIGITAL PRODUCTION SWITCHERS

MFS-2000...... 112 MVS-8000A...... 114 AWS-G500...... 116 DIGITAL PRODUCTION SWITCHERS DIGITAL MFS-2000 Multi-Format switcher

The MFS-2000 Series switcher represents an ideal combination of power, size, versatility, and cost-ef- ﬁciency. Packed in an extremely compact chassis, the MFS-2000 is intended for use in small-scale OB vehicles, production studios, ﬂyaway kits and edit suites. Its multi-format capability allows the MFS- 2000 Series to operate in any current SD or HD format, making it suitable for productions both today and tomorrow. MFS-2000 Processor with MKS-2010 Control Panel • Three control panel choices - 12 button 1 M/E or 1.5 M/E or 20 button 1.5 M/E • All panels feature colour touch-screen LCD panel and Flexi-Pad™ with colour LCD buttons • SD version easily upgradeable to Multi-format • Basic tally connections for live production • Optional Device Control Unit for more sophisticated tally requirements and machine control functions • Optional 2-channel integrated DME with preset ef- fect patterns • Optional 6-channel Frame Memory • Optional RGB Colour Corrector MKS-2015 Control Panel

Optional Accessories HK-PSU02 Backup Power Supply Unit for MFS-2000 Processor HK-PSU11 Backup Power Supply Unit for Control Panel MKS-2700 Device Control Unit HK-PSU01 Power Supply Unit for MKS-2700 MKS-2017 Control Panel

Sony HD Product Guide DIGITAL PRODUCTION SWITCHERS 113

Speciﬁcations (MFS-2000)

General Power Requirements 100 V to 240 V +/ 10% 50/60Hz Power Consumption less than 500W fully loaded Operating Temperature 5°C to 40°C Storage Temperature -20°C to +60°C Operation Humidity 10% to 90% RH Dimensions (W x H x D) 440 x 132.4 x 520 mm (3RU) Mass (approximate) 19kg (fully loaded) Input/Output Connectors Primary Inputs Max. 16, BNC type x 1 each; SMPTE292M (HDTV), SMPTE259-C (SDTV) SDI Video Inputs Max. 8, BNC type x 2 each; SMPTE292M (HDTV), SMPTE259-C (SDTV) Reference Inputs BNC type x , 75ohms with loop-through; HDTV System: HD Tri levels sync; SDTV System: Analogue black burst or analogue sync Reference Output BNC type x 1, 75ohms; HDTV system: HD tri-level sync; SDTV: Ana- logue black burst or analogue sync Control Signals Switcher Interface Control LAN RJ-45 x 1, 100Base-Tx; Data LAN RJ-45 x 1, 100Base-Tx DME Interface Control LAN RJ-45 x 1, 100Base-Tx; Data LAN RJ-45 x 1, 100Base-Tx GPI/Tally D-sub 25-pin (female) x 1, TTL level inputs x 8, Relay contact outputs x 4, open collector outputs x 4 Tally D-sub 25-pin (female) x 1, TTL level inputs x 8, Relay contact outputs x 4, open collector outputs x 4 Serial Tally D-sub 9-pin (female) x 1, RS-422A

Studio/OB-vehicle System DIGITAL PRODUCTION SWITCHERS DIGITAL MVS-8000A Multi-Format Production Switcher System

Sony’s flagship MVS-8000A Series production switchers offer previously unseen levels of performance, flexibility and integration. This powerful multi- format production switcher builds on the established success of the MVS-8000 and DVS-9000 systems and gives operators unrivalled HD performance from a very compact processor chassis. The MVS-8000A Series is continually being enhanced with new features via software upgrades, ensuring flexibility for today and tomorrow. The MVS-8000A is also available in an SD version, offering a simple and cost-effective upgrade path to future Multi-format operation • Fully scalable, offering up to 4 M/E rows • Option for simple PP bus (0.5 M/E) • 4 keyers per M/E • Up to 80 primary inputs and 56 assignable outputs • Control surfaces can be uniquely configured to suit available space and operator preference • Crosspoint, FlexiPad™ and ShotBox™ buttons all incorporate backlit 3-colour LCD indicators for source-names or icons, informing operators of button assignments • Large colour touch-screen menu • Option for up to 8 fully integrated, full function DME (Digital Multi-Effects) channels • Option for up to 8 frame memory channels • External Device Control Units are available to handle up to 30 RS-422A control ports or up to 270 GPIs

Sony HD Product Guide DIGITAL PRODUCTION SWITCHERS 115

Speciﬁcations (MVS-8000A)

General Monitor: Processor Dimensions (W x H x D) 12, BNC type x 2 each MVS-8000A Switcher Processor: Reference Input 482 x 708 x 520 mm (8RU) Switcher Processor: MVS-8000ASF Switcher Processor: BNC type x 2, with loop-through Black Burst or Sync HD Tri-level 482 x 354 x 520mm (4RU) Sync MKS-8010 System Control Unit: Reference Output 482 x 132 x 520 mm Switcher Processor: MKS-8700 Device Control Unit: BNC type x 1 Sync HD Tri-level Sync 482 x 132 x 520 mm Control MVE-8000 DME Processor: Control LAN: 440 x 87.5 x 520 mm RJ-45, 100Base-TX MKS-8011 Menu Display Panel: Data LAN: 424 x 220 x 46 mm RJ-45, 100Base-TX Control Panel Dimensions Remote 1 to 4: 4M/E, 32 Button Panel: D-SUB 9-Pin, RS-422A 1443 x 99 x 528 mm Terminal : 3M/E, 24 Button Panel: D-SUB 9-Pin, RS-232C 1291 x 99 x 528 mm GPI: 2M/E, 16 Button Panel: D-SUB 25 Pin, f/m relay contact O/P’s x 4, open collector 1139 x 99 x 396 mm O/P’s x 4 32 Button Aux Bus Panel: MVE-8000 DME 782 x 132 x 82 mm Control LAN: 24 Button Aux Bus Panel: RJ-45, 100Base-TX 630 x 132 x 82 mm Data LAN: 16 Button Aux Bus Panel: RJ-45, 100Base-TX 478 x 132 x 82 mm Editor: Compact 1 or 2 M/E Control Panel: D-SUB 9-Pin, RS-422A 478 x 208 x 442 mm GPI: Mass D-SUB 25 Pin, f/m relay contact O/P’s x 4, open collector MVS-8000A Switcher Processor: O/P’s x 4 85 kg MKS-8010 System Control Unit MVS-8000ASF Switcher Processor: Control LAN: 43 kg RJ-45, 100Base-TX MKS-8010 System Control Unit: Data LAN: 12 kg RJ-45, 100Base-TX MKS-8700 Device Control Unit: Peripheral LAN: 18 kg RJ-45, 100Base-TX MVE-8000 DME Processor: GPI: 16 kg D-SUB 25 Pin, f/m relay contact O/P’s x 4, open collector MKS-8011 Menu Display Panel: O/P’s x 4 2.2 kg Remote: 4M/E, 32 Button Panel: D-SUB 9-Pin, RS-422A 30 kg LTC: 32 Button Aux Bus Panel: D-SUB 9-Pin 4 kg Device: Compact 1 or 2 M/E Control Panel: USB type A 13 kg CCP-9000 Series Power Requirement Control LAN: Supply Voltage: RJ-45, 100Base-TX 100~240 V AC +/- 10% Data LAN: Frequency: RJ-45, 100Base-TX 50 / 60 Hz Peripheral LAN: Power Consumption RJ-45, 100Base-TX MVS-8000A Switcher Processor: GPI: 2500 W max. D-SUB 25 Pin, f/m relay contact O/P’s x 4, open collector MVS-8000ASF Switcher Processor: O/P’s x 4 1500 W max. Remote: MKS-8010 System Control Unit: D-SUB 9-Pin, RS-422A 250 W max. Device: Compact 1 or 2 M/E Control Panel: USB type A 150 W max. MKS-8700 Device Control unit MKS-8700 Device Control Unit : Peripheral LAN: 250W max. RJ-45, 100Base-TX MVE-8000 DME Processor: Serial Tally 1:

420 W max. D-SUB 9-Pin, RS-422A PRODUCTION SWITCHERS DIGITAL Operating Environment Serial Tally 2: Temperature: D-SUB 9-Pin, RS-422A +5 degC to +40 degC Tally/GPI: Relative Humidity: D-SUB 37 Pin, relay contact O/P’s up to 90% (non-condensing) Remote: Inputs and Outputs D-SUB 9-Pin, RS-422A Serial Digital Inputs SD/HD: 80, BNC type x 1 each Serial Digital Outputs Assignable: 48, BNC type x 2 each AWS-G500 Anycast Station

To accommodate today’s growing needs to integrate video, audio, and a variety of PC input sources in live events, the Anycast Station system provides a comprehensive set of AV and IT inputs. These include analogue composite, S-Video, DV Inputs, SDI and balanced analogue audio as well as computer RGB input. The unique processing of the Anycast Station system allows live switching between these video and computer sources without the use of external line-converters and without degrading picture quality. • All in one design, easy integrated operation • Seamless switching between video and PC sources • Flexible video input conﬁgurations • HD input options • Multi-camera recording for convenient nonlinear editing • Streaming Encoder and Streaming Server

Supplied Accessories Soon to be released Operating Instructions (1) Keyboard (1) BKAW-560 HD Video Interface Module 85 keys + Pointer Infrared communication Powered from AWS-G500: +5 V Battery operation: CR2032 or 2032H” Cell Battery (2) CR2032 Pin to BNC Connector (4) BKAW-590 HD-SDI I/O Board Optional Accessories BKAW-550 PC Video Interface Module BKAW-570 SD Video Interface Module BKAW-580 SDI Interface Module

Sony HD Product Guide DIGITAL PRODUCTION SWITCHERS 117

Speciﬁcations (AWS-G500)

General Recording Source Power Requirements Streaming Performance Video: SD Video Inputs / PGM Codec AC 100-240 V, 50/60 Hz Audio: Inputs(Stereo) / PGM Audio(Stereo) Operating Voltage Real Video 9, Real Audio 8 Streaming Server AC 90-260 V, 47/63 Hz *1 Please contact your nearest Sony office or authorized dealer Power Consumption for the availability. Helix DNA Server *2 Please contact your nearest Sony office or authorized dealer for Protocol 160 W other supported formats. Operating Temperature rtsp (Streaming), UDP, TCP, HTTP (Trans- port) 5 to 40 °C Audio Inputs Dimensions (W x H x D) Audio Sampling Frequency Analogue Inputs 1-2 424 x 114 x 354 mm 44.1kHz XLR/TRS Combo Type x 2 Mass Resolution Ref. Level: +4 dBu, -20 dBu, -44 dBu Approximately 8.0 kg 160x120, 240x180, 320x240 Mic. Power: +48 V Bit Rate (Video+Audio) Video Inputs Analogue Inputs 3-6 Compression Scheme: Variable Bit Rate Composite TRS Type (Balanced) x 4 Preference: Average (Max. Bit Rate) BNC Type x 4 Ref. Level: +4 dBu, -20 dBu, -44 dBu 34kbps(56kbps) / 50kbps(64kbps) / Video: 1.0 Vp-p, 75 Ω, Sync negative Analogue Inputs 7-8 150kbps(180kbps) / S-Video Pin x 2, Ref. Level: -10 dBu 225kbps(256kbps) / 350kbps(700kbps) / DIN Type x 4 Audio Outputs 450kbps(900kbps) / 700kbps(1400kbps) Y: 1.0 Vp-p, 75 Ω, Sync negative PGM OUT Frame Rate C: 0.286 Vp-p at burst, 75 Ω (NTSC) TRS Type x 2, Ref.: +4 dBu, Impedance: 150 15fps (Typical) * C: 0.3 Vp-p at burst, 75 Ω (PAL) * The Anycast Station automatically selects the frame rate ac- Ω RGB cording to bit rate and picture resolution. Therefore the frame MIX OUT rate cannot be manually selected. D-Sub Shrink 15pin Type x2 (Female) Pin Type x 2, Ref.: -10 dBu, Impedance: 470 Distribution Delay Video Outputs Ω 10 seconds or more Composite AUX OUT (inc. player’s minimum buffering delay) BNC Type x1 TRS Type x 2, Ref.: +4 dBu, Impedance: 150 Client Number Video: 1.0 Vp-p, 75 Ω, Sync negative Ω 34, 50, 150kbps: Up to 20 S-Video MONITOR OUT 225, 350kbps: Up to 10 DIN Type x 1 TRS Type x 2, Ref.: +4 dBu, Impedance: 150 450, 700kbps: Up to 5 Y: 1.0 Vp-p, 75 Ω, Sync negative Ω (This number is influenced by network condition.) C: 0.286 Vp-p at burst, 75 Ω (NTSC) HEADPHONES C: 0.3 Vp-p at burst, 75 Ω (PAL) 1/4” Stereo Phone Jack Type x 2 RGB 70mW x 2, Impedance: 47 Ω D-Sub Shrink 15pin Type x2 (Female) INTERCOM REF OUT D-Sub 9-pin Type (Female) BNC Type x 2 Original Parallel I/O Sync: 0.286 Vp-p, 75 Ω, Sync negative Audio Signals Performance (NTSC) Sampling Frequency Sync: 0.3 Vp-p, 75 Ω, Sync negative (PAL) 48kHz x128 over sampling (A/D) 48kHz/ C: 0.286 Vp-p at burst, 75 Ω (NTSC) 32kHz (DV IN) C: 0.3 Vp-p at burst, 75 Ω (PAL) Quantization Video Inputs/Outputs 24 bit (A/D, D/A), 32/40bit (DSP) DV IN/OUT Frequency Response (MIC/LINE) IEEE 1394 6pinx4 20Hz to 20kHz +0.5dB to - 2dB IEC 61883-2 equiv. THD (LINE -10dBu 1kHz) Video Signals Performance 0.1% or less Quantization and Sampling Frequency(SD Dynamic Range Video) 90 dB or more 8 bit Other Interfaces Y: 13.5MHz NETWORK R-Y/B-Y: 6.75MHz RJ-45 Type x 1, 10 base-T/100 base-TX Frequency Response USB NTSC: 0 to 4.2MHz +1dB - 3dB USB A Type x 2, USB equiv. PAL: 0 to 4.8MHz +1dB - 3dB RGB(GUI) S/N Ratio D-Sub Shrink 15 pin (Female), 1280 x 800 50 dB or more (Composite Y) 60 Hz Y/C Delay REMOTE Less than 50ns D-Sub 9 pin (Male), RS-232C REF OUT Frequency Accuracy FACTORY USE Within 50 ppm D-Sub 15 pin (Male), Original Parallel I/O RGB Preset Signals MEMORY STICK XGA 60Hz (VESA DMT1024x768 60Hz) Memory StickTM Slot PRODUCTION SWITCHERS DIGITAL XGA 75Hz (VESA DMT1024x768 75Hz) Memory Stick Pro/Pro Duo/ are not sup- SXGA 60Hz (VESA DMT1280x1024 60Hz) ported. SXGA 75Hz (VESA DMT1280x1024 75Hz) VISCA OUT Input Only DIN 8pin Type x 1 HDD Port Sony VISCA camera commands are sup- i.LINK (in ex-factory configuration) ported. IEEE 1394 S400 6pin Type x 2 LCD HDD IF: SBP2 15.4”High Brightness LCD 1280 x 800 60 Hz HDD Recording / Playback *1 Speaker Codec Built-In Speaker x 2 Size: 20x40(mm) DV Recording Format DV (RAW DV)*2 Sony HD Product Guide HD MONITORS - LCD 119

HD MONITORS - LCD

LMD-322W...... 120 LMD-232W...... 121 LMD-172W...... 122 LMD-9050...... 128 LMD-9030...... 129 LMD-9020...... 130

ACCESSORIES MB-522A...... 123 SU-558...... 123 SU-559...... 123 MEU-WX2...... 124 BKM-220D...... 125 BKM-243HS...... 126 BKM-255DV...... 127 MB-525...... 131 MB-528...... 131 VF-509...... 131 BP-GL95/GL65...... 131 HD MONITORS - LCD HD MONITORS LMD-322W Widescreen LCD Display

Supplied Accessories Speciﬁcations AC cord AC plug holder Picture Performance Horizontal Scanning Frequency Type 31.469 kHz 47.396 kHz Display interface cable a-Si TFT Active Matrix LCD with an AR-coated Vertical Scanning Frequency Warranty card protection panel 59.940 Hz 59.995 Hz Resolution Operating instructions 1280 x 768 dots General Power Consumption Pixel efﬁciency Approx. 120 W 99.99% Power requirement Dot pitch Optional Accessories AC 100 to 240V +/- 10%, 50/60Hz 0.537 x 0.537 mm SU-559 Monitor Stand Operating Temperature Picture Size (W x H) 0 to 35 degree Celsius MEU-WX2 Multi-format Engine Approx. 687 x 412 mm Operating Humidity Picture Size (Diagonal) Unit 30 to 80% (no condensation) 80.2cm (32 inch) Storage & Transport Temperature Aspect -10 to 40 degree Celsius 15:9 Storage & Transport Humidity Colours 0 to 80% 16,770,000 colours Operating/Storage/Trans. Pressure Viewing Angle 700 to 1060 hPa 85°/85°/85°/85° (typical) (up/down/left/right Dimensions (W x H x D) contrast>10:1) 790 x 512 x 94mm Display Input connector Mass Digital input Approx. 17.6 Kg DVI-D Dot clock * without the optional monitor stand and not 25.175 MHz 68.250 MHz including any projecting parts

Sony HD Product Guide HD MONITORS - LCD 121

LMD-232W Widescreen LCD Display

Sony’s two-piece LUMA monitors represent the pinnacle of the LUMA Series. High grade LCD panels are used in conjunction with a dedicated MEU-WX2 signal processing unit. With a rich set of interfaces, they offer SD and HD multi-format capability as well as PC input capability. These monitors are furnished with the features and quality to replace CRT monitors from Sony’s previous PVM-L5 and PVM-L4 range. • 23” high grade LCD panel • Excellent picture reproduction • ChromaTRU - Colour Matching Technology • Excellent brightness and contrast • Wide viewing angle • AR-coated protection panel • Conventional FPD (Flat Panel Display) mount LMD-232W shown with optional SU-558 Monitor • Multi-format signal support (MEU-WX2) Stand and MEU-WX2 Multi-format Engine Unit • Signal interface options (MEU-WX2) • Interpolation technology - X algorithm (MEU-WX2) • Colour temperature/gamma selection (MEU-WX2) • Selectable scan size for video input and aspect ratio (MEU-WX2) • Various markers (MEU-WX2) • Parallel remote control (MEU-WX2) • Stereo audio monitoring (MEU-WX2) • Protected controls (MEU-WX2) Supplied Accessories Speciﬁcations Display interface cable Warranty card Picture Performance Horizontal Scanning Frequency Type 31.469 kHz 47.396 kHz Operating instructions a-Si TFT Active Matrix LCD with an AR-coated Vertical Scanning Frequency protection panel 59.940 Hz 59.995 Hz Resolution 1280 x 768 dots General Optional Accessories Power Consumption Pixel efﬁciency SU-558 Monitor Stand Approx. 65W 99.99% - LCD HD MONITORS Power requirement MEU-WX2 Multi-format Engine Dot pitch DC 16.5V 0.3915 x 0.3915 mm Unit Operating Temperature Picture Size (W x H) 0 to 35 degree Celsius Approx. 501 x 301 mm Operating Humidity Picture Size (Diagonal) 30 to 80% (no condensation) 584 mm (23 inches) Storage & Transport Temperature Aspect -10 to 40 degree Celsius 15:9 Storage & Transport Humidity Colours 0 to 80% 16,770,000 colours Operating/Storage/Trans. Pressure Viewing Angle 700 to 1060 hPa 85°/85°/85°/85° (typical) (up/down/left/right Dimensions (W x H x D) contrast>10:1) 563 x 372 x 78 mm* Display Input connector Mass Digital input Approx. 6.4 Kg DVI-D Dot clock * without the optional monitor stand and not 25.175 MHz 68.250 MHz including any projecting parts LMD-172W Widescreen LCD Display

Sony’s two-piece LUMA monitors represent the pinnacle of the LUMA Series. High grade LCD panels are used in conjunction with a dedicated MEU-WX2 signal processing unit. With a rich set of interfaces, they offer SD and HD multi-format capability as well as PC input capability. These monitors are furnished with the features and quality to replace CRT monitors from Sony’s previous PVM-L5 and PVM-L4 range. • 17” high grade LCD panel • Excellent picture reproduction • ChromaTRU - Colour Matching Technology • Excellent brightness and contrast • Wide viewing angle • AR-coated protection panel • Conventional FPD (Flat Panel Display) mount LMD-172W shown with optional SU-558 Monitor • Multi-format signal support (MEU-WX2) Stand and MEU-WX2 Multi-format Engine Unit • Signal interface options (MEU-WX2) • Interpolation technology - X algorithm (MEU-WX2) • Colour temperature/gamma selection (MEU-WX2) • Selectable scan size for video input and aspect ratio (MEU-WX2) • Various markers (MEU-WX2) • Parallel remote control (MEU-WX2) • Stereo audio monitoring (MEU-WX2) • Protected controls (MEU-WX2) Supplied Accessories Speciﬁcations Display interface cable Warranty card Picture Performance Horizontal Scanning Frequency Type 31.469 kHz 47.396 kHz Operating instructions a-Si TFT Active Matrix LCD with an AR-coated Vertical Scanning Frequency protection panel 59.940 Hz 59.995 Hz Resolution 1280 x 768 dots General Optional Accessories Power Consumption Pixel efﬁciency Approx. 53W SU-558 Monitor Stand 99.99% Power requirement MB-522A Mounting Bracket Dot pitch DC 16.5V / 12V 0.284 x 0.284 mm MEU-WX2 Multi-format Engine Operating Temperature Picture Size (W x H) 0 to 35 degree Celsius Unit Approx. 364 x 218 mm Operating Humidity Picture Size (Diagonal) 30 to 80% (no condensation) 42.4cm (17 inches) Storage & Transport Temperature Aspect -10 to 40 degree Celsius 15:9 Storage & Transport Humidity Colours 0 to 80% 16,770,000 colours Operating/Storage/Trans. Pressure Viewing Angle 700 to 1060 hPa 85°/85°/85°/85° (typical) (up/down/left/right Dimensions (W x H x D) contrast>10:1) 441 x 294 x 76mm Display Input connector Mass Digital input Approx. 4.8 Kg DVI-D Dot clock * without the optional monitor stand and not 25.175 MHz 68.250 MHz including any projecting parts

Sony HD Product Guide HD MONITORS - LCD 123

MB-522A Mounting Bracket

The MB-522A is a 7U size mounting bracket designed to mount the LMD-172W into a standard equipment rack.

Speciﬁcations

Dimensions 483 (W) x 310 (H) x 74 (D) mm Mass Approx..1.4kg

SU-558 Monitor Stand The SU-558 is a monitor stand designed for use with the LMD-172W and the LMD-232W.

Speciﬁcations

Mass 4.9 kg Dimensions 240.2 (W) x 250.3 (D) x 191.6 (H) mm Stand movable range Tilting angle of a monitor: 74° Tilting angle of the stand arm: 64°

SU-559 Monitor Stand

The SU-559 is a ﬂoor stand designed for use with the LMD-322W Widescreen LCD display.

Speciﬁcations

Mass 32 kg Dimensions 602 (W) x 500 (D) x 676 (H) mm

Tilt angle - LCD HD MONITORS 45° MEU-WX2 Multi-format Engine Unit

The MEU-WX2 Multiformat Engine Unit is used in conjunction with a separate LUMA LCD panel and can accept almost any SD or HD video format, both analogue and digital. These include composite PAL and NTSC, component 480/60i and 575/50i, progressive 480/60P and 576/50P, and high-deﬁnition 1080/60i, 1080/50i and 720/60P. It can also accept 1080/24PsF and 1080/25PsF. • Standard interfaces including analogue composite (PAL/NTSC), 525i/625i component, RGB, and Y/C*1. • Digital interfaces are offered as optional boards to meet budgetary and user needs. • Compact (1RU high) and light weight • Accepts PC signals from VGA to SXGA*2.

*1 Y/C signals must be input via the BNC connectors of the MEU- WX2 using an S-Video-to-BNC conversion connector.

*2 SXGA images are down-converted for display.

XLR 4-pin (female) (x1), DC 16.5 V (when AC Supplied Accessories Speciﬁcations power is supplied) DC 12 V (when DC power AC cord is supplied) Input AC plug holder G/Y/Composite, B/PB/S-Y, R/PR/S-C Video Horizontal Scanning Frequency Mounting bracket All BNC, Loop through, automatic 75 15 to 45 kHz Ω termination (x1) Operating instructions Frame Scanning Frequency Composite 48 to 60 Hz CD-ROM 1.0 Vp-p ±3 dB, sync negative Warranty card Y/C Computer Y: 1.0 Vp-p ±3 dB, sync negative Dot clock C: 0.286 Vp-p ±3 dB (NTSC) 0.3 Vp-p ±3 dB 110 MHz (PAL) Horizontal Scanning Frequency Optional Accessories Component 28 to 69 kHz BKM-220D, SD-SDI 4:2:2 Input 0.7 Vp-p ±3 dB Vertical Scanning Frequency (frame) Adaptor RGB 60 to 85 Hz G: 0.7 Vp-p ±3 dB, Sync on G 0.3Vp-p Plug & Play BKM-243HS, HD-SDI/SD-SDI B: 0.7 Vp-p ±3 dB DDC-2B Input Adaptor R: 0.7 Vp-p ±3 dB General BKM-255DV, DV Input Adaptor Audio in (for Video signals) Power consumption Stereo mini jack (x1) -5 dBu, more than 47 kΩ Maximum: Approx. 92 W (with 2 x BKM-243HS OPTION A-1, OPTION A-2 and LMD-230W) Standard: Approx. 26 W Option Slot (x1) (without optional input adaptor) OPTION B-1, OPTION B-2 Power requirement Option Slot (x1) AC 100 to 240 V±10%, 50/60 Hz, DC 12 V Ext. sync BNC (LMD-170W only) Loop-through, automatic 75 Ω termination 0.3 Operating Temperature ~ 4 Vp-p ±3 dB, sync negative, usable tri-level 0 to 35 °C sync signal 0.6 Vp-p ±3 dB Operating Humidity Computer 30 to 85% (no codensation) HD D-sub 15-pin (female) (x1), 0.7 Vp-p, 75 Ω, Storage and Trans. Temperature positive (R,G,B) -10 to 40 °C Audio in (for computer signals) Storage & Transport Humidity Stereo mini jack (x1) -5 dBu, more than 47 kΩ 0 to 90% DC IN* Operating/Storage/Trans. Pressure XLR 4-pin (male) (x1), 12 V, output impedance 700 to 1060 hPa 0.05 Ω or less Dimensions (W x H x D) Output 434 x 44 x 305 mm (excluding protrusions) Audio monitor out Mass Stereo mini jack (x1) Approx. 4.5 Kg Speaker Out Stereo (0.5 W + 0.5 W) PARALLEL Remote Modular 8-pin (Assignable) Display Signal Out Exclusive connector (x1) Display DC Out**

Sony HD Product Guide HD MONITORS - LCD 125

BKM-220D SD-SDI 4:2:2 Input Adaptor

SDI 4:2:2 Input Adaptor for MEU-WX2 provides video input connectors and a decoder for serial digital component signals. • Monitor output (x1) • SD-SDI input (x2)

Speciﬁcations

General Power consumption Approx. 1.5 W Voltage +5 V (supplied from the main unit) Mass Approx. 250 g Operating conditions Temperature 0°C to 35°C Optimum temperature 20°C to 30°C Humidity 0% to 90% (no condensation) Pressure 700hPa to 1060 hPa Storage and transport conditions Temperature -10°C to 40°C Humidity 0% to 90% Pressure 700 hPa to 1060 hPa Maximum external dimensions (w/h/d) 100 × 20 × 162 mm Input/output connectors Digital input BNC × 2, with monitor output connector Signal characteristics Digital component signals Sampling frequency = Y/R-Y/B-Y: 13.5 MHz Digital component signals Quantization = 10bits/sample MONITOR OUT Output signal amplitude: 800 mVp-p ± 10% MONITOR OUT Output impedance: 75-ohms unbalanced Transmission distance Approx. 200 m max. (When using 5C-2V HD MONITORS - LCD HD MONITORS coaxial cables or equivalent.) BKM-243HS HD-SDI/SD-SDI Input Adaptor

HD-SDI/SD-SDI automatic detection input adaptor for MEU-WX2 • Monitor output (x1) • HD-SDI/SD-SDI signal input (x2) - auto detection signal type

Speciﬁcations

General Power consumption Approx. 2 W Voltage +3.3 V, +5 V (supplied from the main unit) Mass Approx. 250 g Operating conditions Temperature 0°C to 35°C Optimum temperature 20°C to 30°C Humidity 0% to 90% (no condensation) Pressure 700hPa to 1060 hPa Storage and transport conditions Temperature -10°C to 40°C Humidity 0% to 90% Pressure 700 hPa to 1060 hPa Maximum external dimensions (w/h/d) 100 × 20 × 162 mm Input/output connectors Digital input BNC × 2, with monitor output connector Signal characteristics Digital component signals Sampling frequency: D1-SDI: Y/R-Y/B-Y: 13.5 MHz; HD-SDI: Y/PB/PR: 74.25 MHz Digital component signals Quantization MONITOR OUT Output signal amplitude: 800 mVp-p ± 10% Output impedance: 75-ohms unbalanced Transmission distance D1-SDI: 200 m max., HD-SDI: 100 m (When using 5C-2V coaxial cables or equivalent.)

Sony HD Product Guide HD MONITORS - LCD 127

BKM-255DV DV Input Adaptor

The BKM-255DV provides i.LINK I/O capability for Sony professional monitors. The built-in decoder decodes both audio and video (525/625). • Two DV I/O connectors (6-pin) • 400 Mbps communications • Multiple connections (IEEE1394 compliant) • Hot plug and play function

Speciﬁcations

General Power requirements +5 v (supplied from the main unit) Power consumption 4w Operating Conditions Temperature 0°C to 35°C Optimum temperature 20°C to 30°C Humidity 0% to 90% (no condensation) Pressure 700hPa to 1060 hPa Storage and transport conditions Temperature -10°C to 40°C Humidity 0% to 90% Pressure 700 hPa to 1060 hPa Maximum external dimensions (w/h/d) 100 × 20 × 161 mm Mass Approx. 230 g Input/Output Connectors DV 6-pin (IEEE1394) x 2 Video Signal Characteristics Sampling Frequency Y/R-Y/B-Y 13.5 MHz Quantisation 8 bits/sample Audio Signal Characteristics Channel number 4 ch

Sampling frequency - LCD HD MONITORS 2 ch: 48 KHz 4 ch: 32 KHz Quantisation 2 ch: 16 bits 4 ch: 12 bits LMD-9050 8.4” Multi-format LCD Monitor Display

Introducing a new line of Sony LUMA 8.4” Profes- sional LCD Monitors. The LMD-9050 is a newly designed high resolution one-piece unit. Capable of AC, DC or battery operation, it is well suited for ﬁeld use, on a desk, or mounted in EIA standard racks. • 8.4-inch* 4:3 aspect ratio screen display • High resolution of 1024 x 768 pixel panel (XGA) • Superb picture performance provides excellent brightness and contrast, and wide viewing angle • Accepts RGB, analogue component, Composite, S-Video, and SDI signals (SD/HD) • 4:3/16:9 switchable display • Selectable scan size • Various marker settings • Colour temperature selection • Three-colour tally

Supplied Accessories Speciﬁcations AC adaptor AC Cord Picture Performance HD-SDI / D1-SDI monitor output Type BNC x 1 AC plug holder a-Si TFT Active Matrix LCD with an AR-coated Audio Operating instructions protection panel Mini Jack x 1 Resolution Headphones CD-ROM 1024 x 768 dots Mini jack x 1 Warranty card Pixel efﬁciency Speaker 99.99% 0.5W (Monaural) Using the CD-ROM Manual Picture Size (W x H) Approx. 170.5 x 127.9 mm, General Power Consumption (DC Operation) Picture Size (diagonal) Approx 24W 213 mm (8.4 inches) Optional Accessories Power Consumption (AC Adaptor) Aspect Approx. 28W (max) MB-525 Mounting Bracket 4:3 Power requirement MB-528 Mounting Panel Colours AC 100 to 240V , 50/60Hz, 0.82A, DC 12V, 16,770,000 colours VF-509 ENG Kit (Viewing Hood, 2.2A Rechargeable Battery Pack Viewing Angle Operating Temperature Carrying Handle and Connector 85°/85°/85°/85° (typical) (up/down/left/right 0 to 40 degree Celsius contrast>10:1) Protector) Operating Humidity BP-GL95/BP-GL65 Rechargeable Inputs 30 to 85% (no condensation) LINE A Storage & Transport Temperature Lithium-ion Battery Pack Composite: BNC x 1 -10 to 40 degree Celsius Y/C: 4-pin mini-DIN x 1 Storage & Transport Humidity Audio: Mini Jack x 1 0 to 90% LINE B Operating/Storage/Trans. Pressure Composite: BNC x 1 700 to 1060 hPa Audio: Mini Jack x 1 Dimensions (W x H x D) Ext Synch 216 x 206 x 136.1 BNC x 1 Dimensions (W x H x D) with supplied stand HD-SDI / D1-SDI 216 x 230 x 159.5 mm BNC x 2 Dimensions (W x H x D) with supplied stand and Parallel remote AC adaptor Modular Connector 8-pin x 1 (assignable) 216 x 230 x 210 mm Outputs Mass LINE A Approx. 3.0Kg (w/o accessories) Composite: BNC x 1 Approx. 3.2 Kg (including stand) Y/C: 4-pin mini -DIN Approx 3.9 Kg (including AC adaptor) LINE B Composite: BNC x 1

Sony HD Product Guide HD MONITORS - LCD 129

LMD-9030 8.4” LCD Monitor With SDI

Introducing a new line of Sony LUMA Professional LCD Monitors. The LMD-9020 and LMD-9030 are newly designed one-piece models capable of AC, DC or battery driven so that they can be hand-held, situated on a desk, or mounted in EIA standard racks. To suit PVM-9L2 or PVM-9L3 applications. In addition to those capabilities, both models can take Ana- logue Component HD signals for viewing purpose to suit HDV applications. • High quality LCD panel • Accurate SD signal reproduction • All-in-one design • PVM replacement • SDI input • Analogue component HD input • Slim, light and compact

Supplied Accessories Speciﬁcations AC adaptor AC Cord Picture Performance SDI monitor output Type BNC x 1 AC plug holder a-Si TFT Active Matrix LCD with an AR-coated Audio Operating instructions protection panel Mini Jack x 1 Resolution Headphones CD-ROM manual 1024 x 768 dots Mini jack x 1 Warranty card Pixel efﬁciency Speaker 99.99% 0.5W (Monaural) Picture Size (W x H) Approx. 170.5 x 127.9 mm, General Power Consumption (DC Operation) Optional Accessories Picture Size (diagonal) Approx 24W 213 mm (8.4 inches) MB-525 Mounting Bracket Power Consumption (AC Adaptor) Aspect Approx. 28W (max) MB-528 Mounting Panel 4:3 Power requirement VF-509 ENG Kit (Viewing Hood, Colours AC 100 to 240V , 50/60Hz, 0.82A, DC 12V, 16,770,000 colours Carrying Handle and Connector 2.2A Rechargeable Battery Pack Viewing Angle Operating Temperature Protector) 85°/85°/85°/85° (typical) (up/down/left/right 0 to 40 degree Celsius contrast>10:1) BP-GL95/BP-GL65 Rechargeable Operating Humidity Lithium-ion Battery Pack Inputs 30 to 85% (no condensation) - LCD HD MONITORS LINE A Storage & Transport Temperature Composite: BNC x 1 -10 to 40 degree Celsius Y/C: 4-pin mini-DIN x 1 Storage & Transport Humidity Audio: Mini Jack x 1 0 to 90% LINE B Operating/Storage/Trans. Pressure Composite: BNC x 1 700 to 1060 hPa Audio: Mini Jack x 1 Dimensions (W x H x D) Ext Synch 216 x 206 x 136.1 BNC x 1 Dimensions (W x H x D) with supplied stand SDI 216 x 230 x 159.5 mm BNC x 2 Dimensions (W x H x D) with supplied stand and Parallel remote AC adaptor Modular Connector 8-pin x 1 (assignable) 216 x 230 x 210 mm Outputs Mass LINE A Approx. 3.0Kg (w/o accessories) Composite: BNC x 1 Approx. 3.2 Kg (including stand) Y/C: 4-pin mini -DIN Approx 3.9 Kg (including AC adaptor) LINE B Composite: BNC x 1 LMD-9020 8.4” LCD Monitor

Supplied Accessories Speciﬁcations AC adaptor Picture Performance Display Output AC Cord Type Line A AC plug holder a-Si TFT Active Matrix LCD with an AR-coated Y/C: 4-pin mini DIN x 1 Operating instructions protection panel Composite: BNC x 1 Resolution Line B CD-ROM manual 640 x 480 dots Composite: BNC x 1 Warranty card Pixel efﬁciency General 99.99% Picture Size (W x H) Power Consumption (DC Operation) Optional Accessories Approx.170.9 x 128.2 mm Approx. 16W (max) Aspect Power Consumption (AC Adaptor) MB-525 Mounting Bracket 4:3 Approx. 20W (max) MB-528 Mounting Panel Colours Power requirement (AC) 16,770,000 colours VF-509 ENG Kit (Viewing Hood, AC 100 to 240V +/- 10%, 50/60Hz Viewing Angle Operating Temperature Carrying Handle and Connector 85°/85°/85°/85° (typical) (up/down/left/right 0 to 40 degree Celsius Protector) contrast>10:1) Operating Humidity Display Input 30 to 80% (no condensation) BP-GL95/BP-GL65 Rechargeable LINE A Storage & Transport Temperature Lithium-ion Battery Pack Composite: BNC x 1 -20 to 60 degree Celsius Audio: Mini Jack x 1 Storage & Transport Humidity LINE B 0 to 90% Composite: BNC x 1 Operating/Storage/Trans. Pressure Audio: Mini Jack x 1 700 to 1060 hPa RGB Component Dimensions (W x H x D) BNC x 3 216 x 206 (230 with stand) x 136.1 (159.5 with Ext Sync stand) mm BNC x 1 Mass Parallel Remote (w/o accessories) Approx. 2.8Kg Modular Connector 8-pin x1 (including stand): Approx. 3.0 Kg (including AC adaptor): Approx 3.7 Kg

Sony HD Product Guide HD MONITORS - LCD 131

MB-525 Mounting Bracket

5U rack mount bracket for the LMD-9050, LMD-9030 and LMD-9020.

Speciﬁcations

Dimension (W x H x D) Approx. 484.4 x 222.5 x 158 mm Mass Approx. 1.8kg

MB-528 Mounting Panel

The MB-528 is a blank panel designed for use with the MB-525 mounting bracket.

Speciﬁcations

Dimensions (W x H x D) Approx. 216 x 208 x 49 mm Mass Approx. 0.6kg

VF-509 ENG Kit

The VF-509 Monitor ENG Kit includes a Carrying Handle, View- ing Hood and Cable Protector. It is suitable for use with LMD- 9050/9030/9020 LCD Monitors.

Speciﬁcations

Mass Approx. 1.3kg VF-509 shown with LMD-9050 LCD Monitor (not included)

BP-GL95/BP-GL65 Rechargeable Lithium-ion Battery Pack The new BP-GL65 Graphite Lithium Ion battery rep- Speciﬁcations resents the latest generation of Sony battery technol- Capacity ogy. Replacing the BP-L40, the BP-GL65 has around BP-GL95: 95Wh 25% greater power capacity, yet is around the same BP-GL65: 65Wh Weight - LCD HD MONITORS size, weight and cost of the BP-L40. BP-GL95: 760g BP-GL65: 550g The BP-GL65 can be used with all current Lithium Approx charge time Ion battery chargers BP-GL95: 190 minutes BP-GL65: 190 minutes • Large capacity and light weight Maximum voltage DC 16.8V • Sony V-Shoe mounting mechanisim Nominal voltage DC 14.4V • Info function Operating temperature -10 to +45 Degrees Celcius • 8 step, 2 colour LED display Sony HD Product Guide HD MONITORS - CRT 133

HD MONITORS - CRT

BVMA-20F1A...... 134 BVMA-14F5A...... 135

ACCESSORIES BKM-61D...... 137 BKM-62HS...... 137 BKM-68X...... 137 BKM-15R...... 138 BKM-14L...... 138 BKM-35H...... 138 MB-510...... 139 SMF-700...... 139 HD MONITORS - CRT HD MONITORS BVMA-20F1A 20” Monitor

Positioned as a successor to the market-acclaimed Sony BVM-D series, the BVM-A series offers a choice of master-grade CRT monitors in two different CRT sizes - 20-inch and 14-inch. Both support multi-format input, accepting a range of SD and HD signal formats, with the added capability of dual-link HD-SDI input to monitor top quality images up to 1080/50i and 1080/60i 4:4:4 RGB. • Master-grade monitors • Flat surface HR Trinitron • Faithful Colour Reproduction • Stable Colour Temperature • Multi-format Signal Support • Dual-link HD-SDI • Ethernet-based remote control • Marker settings • Digital uniformity • Auto white balance/Chroma/Phase/Matrix setup Supplied Accessories Speciﬁcations 4:3 mask General of peak luminance, 10 to 90% APL AC cable Signal format

AC plug holder 15.625 kHz to 45 kHz Synchronisation Retrace time Type Tally label Horizontal: under 3.77 µ sec Display unit Vertical: under 650 µ sec Operation manual Power requirements 100 V to 240 V AC ± 10%, 50/60Hz Raster and picture performance Power consumption (with Option board; Max.) Normal scan Optional Accessories 200 W (Max.) 5% over scan of the effective picture area BKM-15R Monitor Control Unit Dimensions (W x H x D) Under scan 444 X 414 X 570 (mm) 3% under scan of the effective picture area BKM-62HS HD SDI/SDI Input Mass Linearity Adaptor approx. 40 kg Less than 0.5% within circle centered on CRT the screen with a diameter equal to the vertical BKM-61D SDI/Analogue Multi CRT type height, 1% at any other point* Input Adaptor 20-inch HR Trinitron Colour temperature AG pitch D65 / D93 / D56 / USER1-5 (User adjustable) BKM-68X Analogue Component 0.30 mm, 90 ° deﬂection, Ø30.6 mm in-line Convergence Input Adaptor gun Less than 0.4mm within circle centered on BKM-14L Auto Set-up Probe Visual screen the screen with a diameter equal to the vertical (Viewable area, measured diagonally) height, 0.7 mm at any other point BKM-30E20 19” EIA Standard 4:3 386 x 291 mm, (482 mm) Preset brightness Rack Mount Kit 16:9 386 x 218 mm, (443 mm) 100 cd/m2 (when a 1.0 Vp-p 100% white Phosphor signal is input) BKM-35H Monitor Control Unit SMPTE-C/EBU Stability of raster size 1% of picture height (at 100 cd/m2 peak lumi Attachment Kit Input / Output nescence, 10 to 90 % APL) Video SMF-700 Monitor Interface Cable Scan delay See “Input signals by board” table, p136 Horizontal: Approx. 2/9 line Control Vertical: Approx. 1/2 ﬁeld LAN: Eithernet (10 BASE-T/100 BASE-TX), Resolution (Center) RJ-45 x1 16:9: 700 TV lines, 4:3 900 TV lines Parallel remote: D-sub 9-pin x 1 (Short to ground) Operating conditions Option Operating temperature RS-232C serial interface, Mini DIN 8-pin x 1 0 to 35 °C, Optimum range 20 to 30 °C Storage temperature Video signal performance -10 to 40 °C Differential gain (DG) Humidity Within 5% for luminance from 0 to 100 cd/m2 30 to 90 % (no condensation) Differential phase (DP) Within 5º for luminance from 0 to 100 cd/m2 Frequency response *1080/60i and 1035/60i only 48 Hz to 30 MHz +1dB/-3 dB DC restoration Back porch type, back porch level: within 1% Sony HD Product Guide HD MONITORS - CRT 135

BVMA-14F5A 14” Monitor

Positioned as a successor to the market-acclaimed Sony BVM-D series, the BVM-A series offers a choice of master-grade CRT monitors in two different CRT sizes - 20-inch and 14-inch. Both support multi-format input, accepting a range of SD and HD signal formats, with the added capability of dual-link HD-SDI input to monitor top quality images up to 1080/50i and 1080/60i 4:4:4 RGB. • Master-grade monitors • Flat surface HR Trinitron • Faithful Colour Reproduction • Stable Colour Temperature • Multi-format Signal Support • Dual-link HD-SDI • Inbuilt user-friendly monitor control panel with Ethernet-based remote control option • Marker settings • Digital uniformity Supplied Accessories Speciﬁcations 4:3 mask General of peak luminance, 10 to 90% APL AC cable Signal format

AC plug holder 15.625 kHz to 45 kHz Synchronisation Retrace time Type Tally label Horizontal: under 3.77 µ sec Stand-alone monitor Vertical: under 650 µ sec Operation manual Power requirements 100 V to 240 V AC ± 10%, 50/60Hz Raster and picture performance Power consumption (with Option board; Max.) Normal scan Optional Accessories 170 W (Max.) 5% over scan of the effective picture area BKM-15R Monitor Control Unit Dimensions (W x H x D) Under scan 482 X 280 X 571 (mm) 3% under scan of the effective picture area BKM-62HS HD SDI/SDI Input Mass Linearity Adaptor approx. 26 kg Less than 0.5% within circle centered on CRT the screen with a diameter equal to the vertical BKM-61D SDI/Analogue Multi CRT type height, 1% at any other point* Input Adaptor 14-inch HR Trinitron Colour temperature AG pitch D65 / D93 / D56 / USER1-5 (User adjustable) BKM-68X Analogue Component 0.25 mm, 90 ° deﬂection, Ø29.4 mm in-line Convergence Input Adaptor gun Less than 0.4mm within circle centered on BKM-14L Auto Set-up Probe Visual screen the screen with a diameter equal to the vertical (Viewable area, measured diagonally) height, 0.7 mm at any other point BKM-30E14 19” EIA Standard 4:3 267.5 x 200.6 mm, (331.6 mm) Preset brightness Rack Mount Kit 16:9 267.5 x 150.5 mm, (306.9 mm) 100 cd/m2 (when a 1.0 Vp-p 100% white Phosphor signal is input) SMF-700 Monitor Interface Cable SMPTE-C/EBU Stability of raster size 1% of picture height (at 100 cd/m2 peak lumi Input / Output nescence, 10 to 90 % APL) Video Scan delay - CRT HD MONITORS See “Input signals by board” table, p136 Horizontal: Approx. 2/9 line Control Vertical: Approx. 1/2 ﬁeld LAN: Eithernet (10 BASE-T/100 BASE-TX), Resolution (Center) RJ-45 x1 16:9: 600 TV lines, 4:3 800 TV lines Parallel remote: D-sub 9-pin x 1 (Short to ground) Operating conditions Option Operating temperature RS-232C serial interface, Mini DIN 8-pin x 1 0 to 35 °C, Optimum range 20 to 30 °C Storage temperature Video signal performance -10 to 40 °C Differential gain (DG) Humidity Within 5% for luminance from 0 to 100 cd/m2 30 to 90 % (no condensation) Differential phase (DP) Within 5º for luminance from 0 to 100 cd/m2 Frequency response *1080/60i and 1035/60i only 48 Hz to 30 MHz +1dB/-3 dB DC restoration Back porch type, back porch level: within 1% BVM-A Series Acceptable Formats

Input Signals By Board

Sony HD Product Guide HD MONITORS - CRT 137

BKM-61D SDI/Analogue Multi Input Adaptor Provides up to 2 inputs of SD-SDI, and 3 inputs of composite or 1x Y/C input.

Speciﬁcations SDI 2x inputs / 1x monitor output (BNC) Composite PAL/NTSC/SECAM 3x inputs with loop through (BNC) Y/C 1x input (BNC) Dimensions 25 (W) x 256 (H) x 248 (D) mm Mass 930g

BKM-62HS HD SDI/SDI Input Adaptor Provides up to 2 inputs of either HD-SDI or SD-SDI

Speciﬁcations HD SDI / SDI 2x inputs with 2x Monitor output (BNC) accept 4:4:4 HD, 4:2:2HD and 4:2:2 Multi-format: 1080/48i, 1080/50i, 576/50p, 480/60p, 1035/60i, 1080/60i, 720/50p, 720/60p Dimensions 25 (W) x 256 (H) x 248 (D) mm Mass 910g

BKM-68X RGB / Component Board Provides Analogue RGB or Analogue component input. Supports from SD to HD Analogue component signals

Speciﬁcations - CRT HD MONITORS 1x Y/Pb/Pr or RGB input with loop through (BNC) 1x Ext Sync with loop through (BNC) Multi-format: 1080/48i, 1080/50i, 576/50p, 480/60p, 1035/60i, 1080/60i, 720/50p, 720/60p Dimensions 25 (W) x 256 (H) x 248 (D) mm Mass 900g BKM-15R Modular Monitor Control Unit The modular design of the BVM-A Series, in which the monitor and control panel are provided as separate units, allows for greater ﬂexibility in system integration. The BVM-A Series incorporates a new Monitor Control Unit – the BKM-15R – which can be attached below the BVM-A20F1A monitor using the optional Attachment Kit*, or connected remotely via an Ethernet cable. The BVM-A14F5A has its own inbuilt controls but may also be remotely controlled by the BKM-15R.

Speciﬁcations Storage temperature -10 to 40 °C General Humidity Power requirements 30 to 90 % (no condensation) AC : 100 V to 240 V, 50/60 Hz DC : 5 V (supplied from Monitor) AC is prior to DC Control LAN Power consumption Ethernet (10 BASE-T/100 BASE-TX), RJ-45 x1 10 W (MAX) Dimensions (W x H x D) Others 424.0 X 58.8 X 247.8 (mm) Memory stick slot Mass approx. Memory Stick/Memory Stick Duo Compatible 2 kg approx. Operating temperature * The optional BKM-35H Attachment Kit is for the BVM-A20F1. The BKM- 0 to 35 °C 15R does not attach to the BVM-A32E1W. An attachment kit is not required Optimum operating range for the BVM-A14F5. 20 to 30 °C

BKM-14L Auto Set-up Probe

With the BVM-A Series monitors, white can be repro- duced uniformly on every point of the screen, even in the peripheral area, using the digital uniformity circuit. This adjustment can be made manually or automatically, with the use of the optional BKM-14L Auto Set-up Probe. Speciﬁcations

Mass 135g

BKM-35H Monitor Control Unit Attachment Kit

Attachment kit designed to attached the BKM-15R Control Unit to BVMA-20F1A.

Sony HD Product Guide HD MONITORS - CRT 139

MB-510 Mounting Bracket Mounting attachment kit designed to attached the BKM-15R Control Unit to monitors.

SMF-700 Monitor Interface Cable Ethernet and DC power cable for connection between BKM-15R and BVM-A series DTV monitor displays.

Speciﬁcations

Length 2 metres HD MONITORS - CRT HD MONITORS Sony HD Product Guide HD PERIPHERALS 141

HD PERIPHERALS

PFV-SP3100...... 142 PFV-SP3300...... 143 UCP-8060...... 144 HKPF-SP003...... 145 HKSP-008...... 146 HKSP-061M...... 147 HKSP-105...... 148 HKSP-106...... 149 HKSP-525...... 150 HKSP-1125...... 151 HKSP-300...... 152 HKSP-313...... 153 HD PERIPHERALS PFV-SP3100 Signal Processing Unit (1RU) The PFV-SP3100 is a 1RU signal processing unit that accommodates up to four HKSP/HKPF-SP Series function boards together with a redundant power supply. With an HKSP-300 Processing Mod- ule Controller installed, PFV-SP Series processing boards can be managed via an Ethernet 100Base- TX network. • Compact, high-density mounting frame for HKSP and HKPF-SP function boards • 1RU high frame, ﬁtting a 19-inch rack unit • Accommodates a range of modules for multi-format, multi bit-rate applications • Networking applications Supplied Accessories Maintenance Manual (1) Operation manual (1)

Optional Accessories HKPFSP003 Digital Video Distribution Ampliﬁer HKSP008HD HD Frame/Line Synchronizer HKSP061M 8 x 4 Digital Video Selector HKSP105 HD A/V Multiplexer Board HKSP106 HD A/V De-multiplexer Board HKSP525 Down-Converter Board HKSP1125 HD Up-Converter Board HKSP300 Processing Module Controller HKSP313 HD Colour Corrector HKSPR80 Routing Switcher Controller UCP8060 Universal Control Panel

Speciﬁcations

General Power Requirements 100 to 240 V AC, 50/60 Hz Power Supply Capacity +12 V DC; Max 4.4A Operating Temperature 5C to 40C Storage Temperature -20C to 60C Operating Humidity 10 to 90% (no condensation) Dimensions (W x H x D) 440 x 43.2 x 550 mm Inputs/Outputs Remote S-BUS remote connector SYNC Inputs HD tri-level sync or black burst signal (BNC type) (2) (with loop-through outputs) Status Output STATUS OUT (mini D-sub 15-pin female) (1)

Sony HD Product Guide HD PERIPHERALS 143

PFV-SP3300 Signal Processing Unit (3RU) The PFV-SP3300 is a 3RU signal processing unit that accommodates up to 17 processing modules that are compliant with multi-format and multi bit-rate operation. It has two reference inputs for SD and HD signals. With an HKSP-300 processing module controller installed, PFV-SP Series processing boards can be managed via a LAN 100Base-T Ethernet. • Compact and high density mounting frame for HKPF-SP and HKSP processing modules • Accommodates a range of modules for multi-format, multi bit-rate compliant applications • Networking applications • High reliability and ease of maintenance

Supplied Accessories Maintenance Manual (1) Operation manual (1)

Speciﬁcations

General Power Requirements 100 to 240 V AC, 50/60 Hz Current Drain 100 V AC: Max 3.5A, 240 V AC: Max 1.5A Power Supply Capacity +12 V DC: Max 18.7A Operating Temperature 5C to 40C Storage Temperature -20C to 60C Operating Humidity 10 to 90% (no condensation) Dimensions (W x H x D):

440 x 132.4 x 550 mm HD PERIPHERALS Mass Approx. 10 kg (Not including optional boards) Inputs/Outputs Remote S-BUS remote connector (BNC type) (1) SYNC Inputs HD tri-level sync or black burst signal (BNC type) (2) (with loop-through outputs) Status Output STATUS OUT (mini D-sub 15-pin. female) (1) UCP-8060 Universal Control Panel

The UCP-8060 universal control panel can be used for a wide range of applications where control of PFV-SP Series is required. Its compact size and low-proﬁle design makes the UCP-8060 compatible in almost any system environment. A colour touch screen helps to provide quick and positive operation. • Remotely controls the functions and monitors the status of the HKSP-008HD HD frame/line synchronizer board, HKSP-105 audio/video multiplexer board, HKSP-106 audio/video De-multiplexer board, HKSP-313 HD colour corrector board, HKSP-525 down-converter board and HKSP-1125 HD up-converter board. • Sony Memory Stick ™ used to store and load setup data or install software • Compact 3RU height and 2/3 19-inch rack width size • Combines touch-screen operation with knob and button operation • Easy-to-use menu system with simpliﬁed layers; • Shares common operability with MVS-8000A Series production switchers

Supplied Accessories Operation manual (1) Installation manual (1) Rack mount kit (1)

Applicable Models PFV-SP3100 Signal Processing Unit PFV-SP3300 Signal Processing Unit

Speciﬁcations

Control signal DATA LAN RJ-45 (1), 100BASE-TX EXT PANEL1 D-sub 9pin male (1), RS-485 RS-232C (Factory use only) D-sub 9-pin female (1), RS-232C General Power requirements 85 to 265 V AC, 47 to 63 Hz Power consumption 5 V, 15 W Dimensions (H x D x W) 130 x 75 x 306 mm Mass Approx. 1.5kg (3 lb 5 oz

Sony HD Product Guide HD PERIPHERALS 145

HKPF-SP003 Digital Video Distribution Ampliﬁer

The HKPF-SP003 distributes a multi bit-rate signal from 143 Mb/s to 1.5 Gb/s to six outputs. The input signal is re-clocked before distribution. • Distribution of an SD or HD SDI signal • Re-clocking at 143 Mb/s, 177 Mb/s, 270 Mb/s, 360 Mb/s, 540 Mb/s, 1.5 Gb/s • Six distribution outputs • Auto bit rate detection • Auto cable equalization of up to 100 M (at 1.5 Gb/s)

Supplied Accessories Installation manual (1)

Speciﬁcations

General Power Requirements +12 V dc: 0.42A (supplied from a PFV-SP Series Signal Processing Unit) Operation Temperature 5C to 40C Storage Temperature -20C to 60C Operating Humidity 10 to 90% (no condensation) Dimensions: Board (H x W) 112.2 x 388.3 mm Dimensions: Connector Panel (H x D x W) 130 x 152.5 x 19mm Mass: Board Approx. 200g, Connector Panel: Approx. 155g Inputs/Outputs Serial Digital Input SDI IN connector (BNC type) (1) Data Transfer Rate 143 Mb/s to 1.485 Gb/s Input Signal Scramble NZRI signal, 0.8 V p-p Input Return Loss 15dB or more (5 MHz to 1.485 GHz) Cable Length 100 m (when a 5C-FB cable (Fujikura) or Belden 1694 coaxial cable or the eqivalent is used) Serial Digital Output SDI OUT connector (BNC type) (1) Data Transfer Rate 143 Mb/s to 1.485 Gb/s Re-clocking 143 Mb/s, 177 Mb/s, 270 Mb/s, 360 Mb/s, 540 Mb/s, 1.485/1.001 Gb/s, 1.485 Gb/s Output Amplitude 0.8 Vp-p +/- 10% Rise/fall Time 270 ps or less HD PERIPHERALS Output Return Loss 15 dB or more (5 MHz to 1.485 GHz) HKSP-008HD HD Frame/Line Synchronizer

The HKSP-008HD frame/line synchronizer board synchronizes the input HDTV video signal to an external reference. One equalized input, three distribution outputs and one black burst or tri-level sync reference input with passive loop-through output are provided. • HD frame/line synchronizer with three modes of operations • Supports a wide range of video standards • Freeze function when an error is detected in the input signal • Passes eight channels of embedded audio and other ancillary data on VBI

Supplied Accessories Installation manual (1)

Speciﬁcations

Inputs/outputs Video standard 1035/60, 59.94i; 1080/60, 59.94i,50i; 1080/30PsF, 29.97PsF, 25PsF, 24PsF, 23.976PsF HD component serial digital signal (HD-SDI) Conforming to SMPTE-292M; 1.485/1001, 1.485 Gb/s Serial digital video input SDI IN connector (BNC type) (1) Reference input REF IN connector (BNC type) (1); 0.43 Vp-p ±10%, 75 Ω; Black Burst or Tri-level sync Serial digital video outputs SDI OUT connector (BNC type) (3); 0.8 Vp-p ±10%, 75 Ω Reference output Passive loop-through output connector, (BNC type) (1) GPI REMOTE connector (Mini D-sub 15-pin) (1) General Power requirements +12 V DC: 1.7 A (Supplied from PFV-SP Series Signal Processing Unit) Operating temperature 5 to 40 °C Storage temperature -20 to 60 °C Operating humidity 10 to 90% (no condensation) Board Dimensions (H x W) 112.2 x 388.3 mm Connector Panel (H x D x W) 130 x 152.5 x 38 mm Board Mass Approx. 680 g Connector Panel Approx. 300 g

Sony HD Product Guide HD PERIPHERALS 147

HKSP-061M 8 X 4 Digital Video Selector

The HKSP-061M digital video selector board features 8 inputs x 4 outputs and can route serial digital signals at up to 1.5 Gb/s without any setting changes. A variety of matrix configurations are available. • Multi bit-rate transmission • Auto re-clocking function • Auto cable equalization of up to 100m coaxial cable • Excellent configuration flexibility for a wide range of applications • Powerful matrix control function via Sony S-BUS remote interface • Synchronized switching with external reference signal • Retains crosspoint data to restore setting after power-off • Remote status monitoring, plus local monitoring with front panel LED

Speciﬁcations

General Serial digital video input (continued) Power Requirements Cable Length: 100 m max. (When using a +12 V DC: 2.0 A 5C-FB cable (fujikura) or Belden 1694 Operating Temperature coaxial cable or the equivalent is used) 5C to 40C Reference inputs Storage Temperature Supplied through the REF IN connectors on 5C to 40C the PFV-SP Series signal processing units Operating Humidity Reference inputs 10 to 90% (no condensation) REF IN connectors (BNC type) (2), Black Dimensions Burst or Tri-level sync signal Board (H x W): 112.2 x 388.3 mm Serial digital video output Connector Panel (W x H x D): 130 x 152.5 x SDI out connectors (BNC type) (4) 38 mm Data tranfer rates: 143 Mb/s to 1.485 Gb/s Mass Re-clock bit rates: 143, 177, 270, 360, 540 Board: Approx. 450g Mb/s: 1.485/1.001, 1.485 Gb/s Connector Panel: Approx. 300g Output amplitude: 0.8 Vp-p +/- 10% Inputs/Outputs Rise/fall time: 270 ps or less Serial digital video input Output return loss: 15 dB or more (5 MHz to SDI connectors: (BNC type) (8) 1.485 GHz) Data transfer rates: 143 Mb/s to 1.485 Gb/s Remote Input signal: Scrambled NRZI, 0.8 Vp-p S-BUS (BNC type) (1) Input impedance: 75 ohms, unbalanced Data transfer rates: 312.5 kb/s Input return loss: 15 dB or more (5 MHz to 1.485 GHz) HD PERIPHERALS HKSP-105 HD A/V Multiplexer Board

The HKSP-105 is a video/audio multiplexer board that multiplexes four AES/EBU format digital audio signals (8 channels) with an HD SDI video signal. Two outputs of the multiplexed signal are provided. By cascading two HKSP-105 boards, a further four AES/EBU signals can be pairs/sixteen channels. • Multiplexers four AES/EBU signals with an HD SDI signal • Audio delay adjustable (maximum two video frames) • Auto selection of HD multi-format • Remotely controllable from an optional UCP-8060 Universal Control Panel (Ethernet 100BASE-TX) • Masks and retains of HANC area and embedded audio data • Transfers UMID and VITC data • Provides simpliﬁed Signal Generator • External reference input (PFV-SP Series Signal Processing Unit)

Speciﬁcations

General Digital Video Signal Input (continued) Power Requirements Transmission loss: 20 dB or less (at 742.5 +12 V DC: less than 1.0A MHz) Power Consumption Cable length: 100 m max. (when using a Approx. 12 W 5C-FB coaxial cable or PD-3079 COOPER Operating Temperature RG-6/U type Super Low Loss Digital Video 5C to 40C Coax or equivalents Storage Temperature Reference Inputs -20C to 55C Supplied through the REF IN connectors on Operating Humidity the PFV-SP Series signal processing units 10 to 90% (without condensation) REF IN connectors (BNC type) (2), Black Burst Dimensions: or Tri-level sync signal Board (H x W): 112.2 x 388.3 mm Digital audio signal inputs Connector Panel (H x D x W): 130 x 152.5 x DIGITAL IN AUDIO connectors (BNC type) (4), 19 mm AES3-format digital audio signal Inputs/Outputs Digital signal outputs Digital Video Signal Input HD SDI OUT connectors (BNC type) (2), HD SDI IN connector: (BNC type) (1), HD serial digital signal conforming to HD serial digital signal conforming to SMPTE291M/292M/299M, 1.4835 or 1.485 SMPTE291M/292M/299M, 1.4835 or 1.485 Gb/s Gb/s Digital input/output system delay Input Impedence: 75 ohm, unbalanced Video: Less than 1.4 micro seconds Input Return Loss: 15 dB or less (at 742.5 MHz)

Sony HD Product Guide HD PERIPHERALS 149

HKSP-106 HD A/V De-multiplexer Board

The HKSP-106 is a video/audio de-multiplexer board that de-multiplexes four AES/EBU-format digital audio signals from a multiplexed HD SDI signal. The HD SDI input signal is distributed to two outputs. Up to eight pairs/sixteen channels of audio can be separated from a multiplexed HD SDI signal by connecting two HKSP-106 boards in cascade. • De-multiplexers eight channel audio signals from an HD SDI signal and outputs four AES/EBU digital audio signals • Audio delay adjustable (maximum two video frames) • Remotely controllable from an optional UCP-8060 Universal Control Panel (Ethernet 100BASE-TX) • Masks and retains of HANC area and embedded audio data • Transfers UMID and VITC data • Provides simpliﬁed Signal Generator • External reference input (PFV-SP Series Signal Processing Unit) Speciﬁcations

General Power Requirements +12 V DC: less than 1.0A Power Consumption Approx. 12 W Operating Temperature 5C to 40C Storage Temperature -20C to 55C Operating Humidity 10 to 90% (without condensation) Dimensions: Board (H x W) 112.2 x 388.3 mm Connector Panel (H x D x W): 130 x 152.5 x 19 mm Inputs/Outputs Digital Video Signal Input HD SDI IN connector (BNC type) (1), HD serial digital signal conforming to SMPTE291M/292M/299M, 1.4835 or 1.485 Gb/s Input Impedence: 75 ohm, unbalanced Input Return Loss: 15 dB or less (at 742.5 MHz) Transmission loss: 20 dB or less (at 742.5 MHz) Cable length: 100 m max. (when using a 5C-FB coaxial cable or PD-3079 COOPER RG-6/U type Super Low Loss Digital Video Coax or equivalents Reference Inputs Supplied through the REF IN connectors on the PFV-SP Series signal processing units

REF IN connectors (BNC type) (2), Black Burst or Tri-level sync signal HD PERIPHERALS Digital audio signal inputs DIGITAL IN AUDIO connectors (BNC type) (4), AES3-format digital audio signal Digital signal outputs HD SDI OUT connectors (BNC type) (2), HD serial digital signal conform ing to SMPTE291M/292M/299M, 1.4835 or 1.485 Gb/s Digital input/output system delay Video: Less than 1.4 micro seconds HKSP-525 Down-Converter

The HKSP-525 down-converter board converts an HD SDI signal to an SD SDI signal. It accepts an HD SDI input with embedded audio, and provides three SD SDI outputs (525/625) with embedded audio, plus an analogue monitor output. • Down converts an HD SDI signal to an SD SDI signal • Provides an analogue composite monitor output • Handles eight embedded audio channels • Transfers ancillary data (VITC) from HD SDI signals to down-converted SD SDI signals • Output signal aspect ratio modes selectable from Squeeze, Edge Crop, Letter Box (16:9) and Semi Letter Box (13:9. 14:9, 15:9) • Minimum delay/frame delay selectable • Remotely controllable • Auto colorimetry selection between 1035 and 1080 active lines

Speciﬁcations

Inputs/outputs Analogue video output Digital video signal input Monitor output connector (BNC type) (1) HD SDI IN connector (BNC type) (1) Analogue video type Digital video signal type PAL/NTSC composite video signal HD serial digital video signal conforming Output impedance to SMPTE291M/292M/299M 75 Ω, unbalanced Input impedance Amplitude 75 Ω, unbalanced 1.0 Vp-p Input return loss System delay 15 dB or more (5 M to 1.5 GHz) 90 H/1 video frames selectable Transmission loss Less than 20 dB General Power supply Cable length +12 V DC: 1.0 A 100 m max. (when using a 5C-FB coaxial Power consumption cable) Approx. 12W Data rate Operating temperature 1.4835 or 1.485 Gb/s 5 to 40 °C Reference inputs Storage temperature Supplied through the REF IN connectors -20 to 60 °C on the PFV-SP Series signal processing Operating humidity units 10 to 90% Reference Board Dimensions (H x W) REF IN connectors (BNC type) (2), Black 112.2 x 388.3 mm Burst Connector panel (H x D x W) Digital video outputs 130 x 152.5 x 19 mm D1 SDI OUT 1, 2, 3 (BNC type) (1 each) Board Mass Digital video type Approx. 1500 g 525/625 component serial digital video Connector panel Mass signal conforming to SMPTE259M Approx. 500 g Output impedance 75 Ω, unbalanced Amplitude 800 mVp-p ±10% Output return loss 15 dB or more (5 M to 270 MHz) Cable length 200 m max. (when using a 5C-2B coaxial cable) Data rate 270 Mb/s

Sony HD Product Guide HD PERIPHERALS 151

HKSP-1125 HD Up-Converter Board

The HKSP-1125 is a 525-line or 625-line to 1125i or 720P up-converter with an auto colorimetry selection capability and selectable output modes. The HKSP- 1125 accepts inputs in conventional NTSC composite analogue or NTSC composite serial digital or 525/625 component serial digital signal format, and provides three HD serial digital outputs to the 1125i or 720P interlaced HDTV standard. The 1125 output can be in the 1035 or 1080 active line format. • Up-converts a 625 component serial digital, a 525 component or NTSC composite serial digital, or an NTSC composite analogue video signal to the 1125/59i, 1125/50i or 720/59P HDTV standard • 525/625 Black Burst or 1125 tri-level Sync input • Three distribution outputs of HD SDI with embedded audio • 1035 or 1080 active lines output switchable • Remotely controllable from an optional HKDV- 503/900 Digital Video Controller via RS-422 (GPI also provided) or UCP-8060 Universal Control Panel (Ethernet 100BASE-TX) • Auto colorimetry selection between 1035 and 1080 active lines

Speciﬁcations

General Power Requirement 12VDC: Less than 1.8A Power Consumption Max: 21.6W Operating Temperature 5C to 40C Storage Temperature -20C to 60C Operating Humidity 10 to 90% (no condensation) Dimensions Board (H x W): 112.2 x 388.3 mm Connector Panel (H x D x W): 130 x 152.5 x 38 mminches) Inputs/Outputs Digital Signal Input SDI IN connector (BNC type) (1), NTSC composite or 525/625 component serial digital signal with embedded audio conforming to SMPTE259M-A/C (ITU-R BT.601/BT.656), 270 Mb/s, 143 Mb/s, 75 ohms unbalanced Input impedance: 75 ohms unbalanced

Input return loss: 15 dB or more (5 MHz to 270 MHz) HD PERIPHERALS Cable length: More than 200m (when using Balden 8281, Fujikura 5C2V or equivalent coaxial cable) Analogue Signal Input Analogue VIDEO IN connector (BNC type) (1) Reference Inputs Supplied through the REF IN connectors on the PFV-SP Series signal processing units, REF IN connectors (BNC type) (2), Black Burst or tri-level sync signal Digital Signal Outputs HD SDI OUT connectors (BNC type) (3), HD component serial digital signal conforming to SMPTE291M/292M/299M, 1.4835 or 1.485 Gb/s Digital Input/Output System Delay Video: 1frame 0.6 to 1. frames (frame synchronizer) HKSP-300 Processing Module Controller

With an HKSP-300 processing module controller installed, the function boards accommodated within the same PFV-SP Series processing units can be controlled from a UCP-8060 universal control panel over an Ethernet-based network. A redundant CPU is available by installing two HKSP-300 boards. The newly developed set-up data backup function retains the settings of the function boards when they have been exchanged. Set-up for networking can be car- ried out through a connected PC. • Networking applications • Redundant CPU available by installing two HKSP- 300 boards • Auto backup function for set-up data • Eight inputs and four outputs of GPI interface

Supplied Accessories 3.5 inches ﬂoppy disk Installation Guide (1) Installation manual (1)

Speciﬁcations

General Power Requirements +12 V DC: 0.8A Operating Temperature 5C to 40C Storage Temperature -20C to 60C Operating Humidity 10 to 90% (no condensation) Dimensions: Connector Panel (W x H x D): 130 x 152.5 x 19 mm Mass Board: Approx. 350g Connector Panel: 130g Dimensions: Board (H x W) 112.2 x 388.3 mm Inputs/Outputs Reference inputs Supplied through the REF IN connectors on the PFV-SP Series signal processing units Reference inputs REF IN connectors (BNC type) (2); Black Burst or Tri-level sync signal Remote CONTROL LAN: RJ-45 (1), Ethernet 100Base-TX; DATA LAN: RJ-45 (1), Ethernet 100Base-TX/10Base-T; RS-422: D-sub 15 pin (1); GPI: Mini D-sub 15-pin (1)

Sony HD Product Guide HD PERIPHERALS 153

HKSP-313 HD Colour Corrector

The HKSP-313 colour corrector board provides control of various colour control parameters for different types of signal and complies with multiple HD formats. It also provides line conversion between 1035 and 1080, and format conversion between 1080 and 720P. • HD signal colour correction control • Enhancer Control • Active line conversions between 1035 and 1080 • Format conversion between 1080 and 720P • Audio delay function • HD SDI active loop-through output • Retains ancillary data and embedded audio data • Transfers UMID and VITC data • Built-in signal generator • System delay available • Remotely controllable from an optional HKDV- 503/900 digital video controller via RS-422 (GPI also provided) or UCP-8060 universal control panel (Ethernet 100BASE-TX) • Up to eight HKSP-313 boards can be installed in a PFV-SP3300 signal processing unit

Speciﬁcations

General Power Requirements +12 V DC: less than 1.5A Power Consumption Approx. 18 W Operating Temperature 5C to 40C Storage Temperature -20C to 55C Operating Humidity 10 to 90% (without condensation) Dimensions Board (H x W): 112.2 x 388.3 mm Connector Panel (H x D x W): 130 x 152.5 x 19 mm Inputs/Outputs Digital Video Signal Input HD SDI IN connector (BNC type) (1), HD component serial digital signal conforming to SMPTE291M/292M/299M, 1.4835 or 1.485 Gb/s Input Impedence: 75 ohm, unbalanced Input Return Loss: 15 dB or less (at 742.5 MHz)

Transmission loss: 20 dB or less (at 742.5 MHz) HD PERIPHERALS Cable length: 100 m max. (when using a 5C-FB coaxial cable or PD-3079 COOPER RG-6/U type Super Low Loss Digital Video Coax or equivalents HD SDI ACTIVE THROUGH OUT connector (BNC type) (1) Reference Inputs Supplied through the REF IN connectors on the PFV-SP Series signal processing units REF IN connectors (BNC type) (2), Black Burst or Tri-level sync signal Digital signal outputs HD SDI OUT connectors (BNC type) (3), HD serial digital signal conform ing to SMPTE291M/292M/299M, 1.4835 or 1.485 Gb/s Digital input/output system delay Video: Less than 1.4 micro seconds Sony HD Product Guide HD LARGE VENUE PROJECTORS 155

HD LARGE VENUE PROJECTORS

SRX-R105...... 156 SRX-R110...... 156 HD LARGE VENUE PROJECTORS SRX-R105 / SRX-R110 Large Venue Projector

The SRX-R110 and SRX-R105 are Sony’s all- new large-venue projectors, tailored with stunning features and picture performance to address the quality-critical demands in Digital Cinema applications and other large-venue systems. Combining the highest-resolution “4K” SXRD imaging device with a contrast ratio of over 1800:1 with the use of twin Xenon lamps means the SRX-R110 and the SRX- R105 offer pure, high quality colour tonal reproduction reminiscent of ﬁlm In addition to this high performance, these projectors are designed to be small and lightweight enabling ease of installation in almost any type of facility. Equally important, their HD-SDI input - which provides an encrypted connection when combined with an optional media-block* which enables digital contents to be securely projected onto screens with absolutely no compromise in the “4K” quality. • Silicon X-tal Reﬂective Display (SXRD) imaging device • High Resolution • High 1800:1 contrast ratio • Vertically Aligned Liquid Crystal System • Thin liquid crystal cell gap • Short response time • Reliable imaging device • Highly bright and pure light source of Xenon lamp • 12-bit LCD driver • Gamma curve selection • Dual-lamp system with selectable lamp modes • Variety of lenses • Multiple screen capability

Supplied Accessories Optional Accessories - continued CD-ROM x 1 (Remote control application for Win- LKRLZ140- X4.0-7.0 Power zoom lens dows® XP Professional Edition LKRX105- Lamp bulb for 5,000 Lumen model Dry cell (AA size) x 2 LKRXB105- Lamp house for 5000 Lumen model Ethernet Cross Cable (3 m) x 1 Remote controller x 1

Optional Accessories LKRI001- Analogue RGB/Component input board LKRI002- HD SDI (4:2:2) input board LKRI003- Dual link HDSI input board LKRLZ115- X1.5-1.9 Power zoom lens LKRLZ120- X1.9-2.3 Power zoom lens LKRLZ125- X2.3-4.0 Power zoom lens

Sony HD Product Guide HD LARGE VENUE PROJECTORS 157

Speciﬁcations

SXRD Device Main Specifications Input B Display device Open for optional signal interface board SXRD (Silicon X-tal Reflective Display) Input C Resolution Open for optional signal interface board 4096(H) X 2160(V) Pixels Input D Reflectivity Open for optional signal interface board 72% Remote interface Contrast (as device) D-sub 9-pin, RS-232C (female) x 1 More than 4000 : 1 Ethernet terminal, 10Base-T/100Base-TX x 1 Pixel pitch 8.5µm Input Boards LKRI-001 Analog input board Width (between pixels) BNC x 5, HD/SD analog video input, 0.35µm RGB/Y • Cb • Cr selectable Response speed Computer signals 5msec (tr + tf) R: 0.7 Vp-p ±2dB positive, 75 Ω Liquid crystal mode G: 0.7 Vp-p ±2dB positive, 75 Ω Vertical Aligned Mode B: 0.7 Vp-p ±2dB positive, 75 Ω Liquid crystal cell gap Standard definition video [Y • Cb • Cr] Less than 2µm Y: 1.0 Vp-p ±2dB sync negative, 75 Ω Optical Cb: 0.7 Vp-p ±2dB positive, 75 Ω Projection system Cr: 0.7 Vp-p ±2dB positive, 75 Ω 3-SXRD panel, prism colour integrated system High definition video [RGB] Imaging device R: 0.7 Vp-p ±2dB positive, 75 Ω SXRD, 1.55-inch (diagonal), 4096(H) x 2160(V) pixels G with sync: 1.0 Vp-p ±2dB, 75 Ω, Tri-level sync: ±0.3 Vp-p / Bi- Lamp level sync: 0.3 Vp-p 1kW Xenon lamp x 2 (SRX-R105) B: 0.7 Vp-p ±2dB positive, 75 Ω Screen coverage Approx. 4.5 m to 15.5 m High definition video [Y • Pb • Pr] Light output Y: 1.0 Vp-p ±2dB, 75 Ω,Tri-level sync: ±0.3 Vp-p / Bi-level 5,000 ANSI lumens ±10% (SRX-R105) sync: 0.3 Vp-p General Pb: ±0.35 Vp-p ±2dB, positive 75 Ω Contrast Pr: ±0.35 Vp-p ±2dB, positive 75 Ω more than 1800:1 Sync Resolution HD Horizontal: TTL level, high impedance, sync positive/negative 600 TV lines (SDI input/SMPTE-259M) HD Vertical: TTL level, high impedance, sync positive/negative Resolution LKRI-002 HD-SDI (4:2:2) input board 1920 x 1080 pixels (HD-SDI input, SMPTE-292M) BNC x 2(Input x 1,Loop-through out x 1) Resolution HD-SDI (SMPTE-292M / ITU-R.BT709 / BTA-S004) 4096 x 2160 pixels (RGB) SDI (SMPTE-259M / ITU-R.BT601) Power requirements LKRI-003 Dual-link HD-SDI input board AC 100 to 240 V, 50/60 Hz (SRX-R105) BNC x 4(Input x 2,Loop-through out x 2) Operating temperature HD-SDI (Single-link, HD-SDI/4:2:2,SMPTE-292M):Y • Pb • Pr, +5ºC to +35ºC DC-SDI (Single-link, DC-SDI/4:2:2):Y • Pb • Pr, Operating humidity Dual-link HD-SDI (Dual-link HD-SDI/4:4:4,SMPTE-372M):RGB, 35% to 85% (without condensation) Dual-link DC-SDI (Dual-link DC-SDI/4:4:4):RGB Dimensions (W x H x D) Others Approx. 740 x 500 x 1330mm Safety regulations Mass [UL60950 listed], [cUL60950], [FCC Class A], [IC Class A], [VCCI Approx. 110 kg Class A], [EN60950],[CE Class A], [C-tick], [GB4943], [GB9254], Input/Output [K60950], [CISPR22], [CISPR24] Input A Open for optional signal interface board HD LARGE VENUE PROJECTORS HDCAM SR media

Advanced Metal Tape Technology Evolves Again. A New Pin- nacle of Picture Quality with Original Nano Technology. The new tape coating uses newly developed ultra ﬁ ne high- performance metal particles, an original new binder dispersion system and new calendering technology. This permits high density recording with a recording wavelength of 0.29µm.With its ultra thin magnetic recording layer, this high-performance metal tape delivers high picture quality, high durability, and high reliability. Recording length of up to 40 minutes for the small-size cassette, and 124 minutes for the large-size cassette are now available.

MODEL PLAYING TIME TAPE LENGTH WEIGHT MASTER CARTON (MIN.) (M) (g) QTY WEIGHT (KG) BCT-6R 6 52 263 15.3 BCT-33SR 33 243 305 50 pcs 17.4 BCT-40SR 40 293 314 17.8 BCT-64SRL 64 469 677 7.5 BCT-94SRL 94 681 724 10 pcs 7.9 BCT-124SRL 124 893 767 8.4

HDCAM media

The HDCAM Digital cassette incorporates Sony’s advanced metal tape technology--winner of two Emmy Awards (Metal Broadcasting Tape Technology in 1990; Digital Betacam Metal Tape Technology in 1995)--for use in the world’s ﬁ rst HDCAM format camcorder. The development of a high performance metal tape enables high density recording with a recording wavelength of 0.49µm, achieving digital recording lengths of up to 40 minutes for the small-size cassette, and 124 minutes for the large-size cassette.

MODEL PLAYING TIME TAPE LENGTH WEIGHT MASTER CARTON (MIN.) (M) (g) QTY WEIGHT (KG) BCT-6HD 6 43 260 14.8 BCT-12HD 12 78 270 15.3 BCT-22HD 22 136 277 50 pcs 16.0 BCT-32HD 32 195 295 17.0 BCT-40HD 40 241 308 17.4 BCT-34HDL 34 206 630 6.6 BCT-64HDL 64 382 677 7.1 10 pcs BCT-94HDL 94 557 760 7.6 BCT-124HDL 124 732 780 8.2

Sony HD Product Guide HD MEDIA 159

XDCAM HD media

Employing blue laser technology, the XDCAM Professional Disc is a newly developed optical disc with the same 12cm diameter as CD or DVD, but achieving massive 23.3GB storage capacity. It exhibits outstanding durability and long-term archival characteristics, while providing split-second random access along with high picture quality and high sound quality. This media meets the needs of professional users for reliability and high performance under a wide range of conditions. A 405nm wavelength blue laser optical head is used to achieve 23.3GB recording capacity on a single-side, single-layer Pro- fessional Disc. Making the minimum pit length 0.16µm enables approximately 45-minute recording at 50Mbps (IMX) or about 85 minutes at 25Mbps (DVCAM).

PLAYING TIME MASTER CARTON RECORDING MODEL RECORDING WEIGHT (G) WEIGHT (MIN) CAPACITY (GB) QTY FORMAT (KG) HD-HQ35Mbps 68* HD-SP25Mbps 90* HD-LP18Mbps 122* 50 PFD-23 IMX50Mbps 45 23.3 189 10.4 pcs IMX40Mbps 60 IMX30Mbps 75 DVCAM 85 * - Figures based on 2 channel audio recording

HDV media

The DigitalMaster cassette has been designed for professional grade HD applications. It offers the highest degree of protection against dropouts through the implementation of dual-layer metal evaporated tape technology. This contributes to further improvement in RF output and noise reduction, providing 1 dB better C/N or 50% fewer drop-outs (at -6 dB, 5μS) compared to Sony consumer HDV tape. Also utilised is Sony’s Diamond Like Carbon (DLC) coating, designed to protect the recording layer from damage under demanding conditions. It results in three time the durability of consumer HDV media, so your valuable assets are protected.

MODEL PLAYING TIME TAPE LENGTH WEIGHT MASTER CARTON HD MEDIA (MIN.) (M) (g) QTY WEIGHT (KG) PHDV-M63DM 63 73 64 4.0 PHDV-64DM 64 75 127 6.9 PHDV-124DM 124 143 130 50 pcs 7.0 PHDV-186DM 186 214 135 7.3 PH-DV276DM 276 315 142 7.6 Product Index - Alphabetical

A HDC-X300...... 42 HKSR-101...... 75 AC-DN10...... 24 HDC-X310 ...... 44 HKSR-5001...... 76 AC-DN2B...... 24 HD-FX100 ...... 56 HKSR-5002...... 76 AWS-G500 ...... 116 HDLA-1500 ...... 57 HKSR-5003...... 76 HD-TX100 ...... 56 HVR-A1P...... 20 B HDVF-20A ...... 58 HVR-M15P...... 108 BC-L70...... 26,94 HDVF-700A ...... 60 HVR-M25P...... 106 BC-M150...... 26,94 HDVF-9900 ...... 61 HVR-Z1P...... 18 HDVF-C30W ...... 59 BKM-14L...... 138 J BKM-15R ...... 138 HDVF-C730W...... 62 BKM-220D...... 125 HDW-2000 ...... 86 J-H1...... 90 BKM-243HS ...... 126 HDW-730S...... 9 J-H3...... 92 BKM-255DV ...... 127 HDW-750P...... 7 L HDW-D2000...... 82 BKM-35H ...... 138 LCD-S300SFT...... 29 HDW-F900R ...... 5 BKM-61D...... 137 LMD-172W...... 122 HDW-M2000P...... 78 BKM-62HS ...... 137 LMD-232W...... 121 HDW-M2100P...... 80 BKM-68X ...... 137 LMD-322W...... 120 HDW-S2000...... 84 BKMW-102...... 95 LMD-9020...... 130 HDW-S280...... 88 BKMW-103...... 95 LMD-9030...... 129 HFBK-HD1 ...... 63 BKNW-7000 series ...... 95 LMD-9050...... 128 HFBK-SD1 ...... 63 BKP-L551...... 95 LO-32BMT...... 29 BKW-L401...... 24 HFBK-TS1...... 63 BP-GL65/95 ...... 25,96,131 HFBK-XG1 ...... 63 M BPL-60S...... 25 HFU-X310 ...... 64 MB-510...... 139 BRBK-H700 ...... 50 HKC-SV1...... 63 MB-522A ...... 123 BRC-H700 ...... 46 HKCU-1001...... 64 MB-525 ...... 131 BRU-H700...... 50 HKCU-1003...... 64 MB-528...... 131 BVMA-14F5A ...... 135 HKCU-1005...... 64 MEU-WX2 ...... 124 BVMA-20F1A ...... 134 HKDV-900 ...... 96 MFS-2000 ...... 112 HKDW-101...... 97 C MLB-1M-100...... 97 HKDW-102...... 97 MSU-900/950...... 65 CAC-12 ...... 27 HKDW-702...... 28 MVS-8000A ...... 114 CA-WR855...... 27 HKDW-703...... 28 CCA-5 cables...... 50 HKDW-704...... 28 P CNU-700 ...... 50 HKDW-902R ...... 28 PDBK-101 ...... 104 E HKDW-905R ...... 28 PDBK-102 ...... 104 HKJ-101 ...... 97 PDBK-103 ...... 104 ECM-670...... 27 HKPF-SP003 ...... 145 PDBK-104 ...... 104 H HKSP-008HD...... 146 PDW-F330...... 12 HKSP061M ...... 147 HDC-1000 ...... 34 PDW-F350...... 14 HKSP-105 ...... 148 HDC-1500 ...... 36 PDW-F30...... 102 HKSP-106 ...... 149 HDC-1550 ...... 38 PDW-F70...... 100 HKSP-1125 ...... 151 HDC-3300 ...... 40 PFV-SP3100...... 142 HKSP-300 ...... 152 HDCU-1000...... 52 PFV-SP3300...... 143 HKSP-313 ...... 153 HDCU-1500...... 54 HKSP-525 ...... 150 Sony HD Product Guide PRODUCT INDEX 161

R RCC-5G...... 98 RCP-700 ...... 66 RCP-750 ...... 66 RM-280 ...... 98 RM-B150 ...... 67 RM-B750 ...... 67 RMB-R300 ...... 67 RMM-110...... 76 RMM-131 ...... 98 S SMF-700 ...... 139 SRPC-1 ...... 74 SRW-1...... 74 SRW-5000...... 72 SRW-5500...... 70 SRX-R105 ...... 156 SRX-R110 ...... 156 SU-558 ...... 123 SU-559 ...... 123 U UCP-8060 ...... 144 V VCT-14 ...... 29,67 VCT-U14 ...... 29 VF-509...... 131 W WRR-855A ...... 30 WRR-862A...... 31 PRODUCT INDEX PRODUCT Sony HD Product Guide CONTACT DETAILS 163

Sony Australia Limited Business Solutions Division

ABN 59 001 215 354

Tel: 1800 017 669 E-mail: [email protected] Web: http://www.sony.com.au/production

P.O. Box 377 North Ryde NSW 2113

Sony New Zealand Limited Broadcast & Production Group, Business Division

Tel: 0800 SONYPRO E-mail: [email protected] Web: http://www.sonybusiness.co.nz

P.O. Box 100-045 North Shore Mail Centre Akoranga Business Park Northcote Auckland

Whilst information given is true at time of printing, small production changes in the course of our company’s policy of improvement through research and design might not necessarily be included in the speciﬁcations. Errors and omissions excepted.