November 2011 Klenk® Aviation Klenk® Aviation Snips Klenk® Aviation Snips November 2011 Klenk® Aviation Snips Klenk® Offset Aviation Snips Klenk® Bulldog Snips Unique flat design makes this the l +Superior Materials, Perfect for T-bar in drop ceilings and extruded easiest turning snip available. aluminum frames +Individual Craftsmanship, and l Cuts heavier gauge metal l New shorter handles with softer grip on upper handle l Ideal for 'S' slips + gives you ergonomic comfort, reducing hand fatigue. A Unique Series of Quality Checks and drives l Precision-ground tips meet together evenly to HVACR and Keep KLENKS long prevent fishhooks, burrs, and tears at end HVACR and Metal Roofing after other snips give out! of each cut. Metal Roofing

Tools MODEL # DESCRIPTION MODEL # DESCRIPTION CUT • Klenk® Aviation Snips MA74500 Bulldog Snips, 9" long, :" cut • Crimpers Our Pledge: MA75200 Offset snips, LEFT/STRAIGHT CUT, 102" long, 1d" cut • • Fairmont Tongs ® +DURABILITY MA75210 Offset snips, RIGHT/STRAIGHT CUT, 102" long, 1d" cut Klenk Copper Cutting Snips • Folding Tools Smooth cut -- leaves no teeth marks! • Hand Seamers +EASIEST CUTTING l Ideal for architectural metals -- copper, brass, zinc, • Duct/Insulation +MOST COMFORTABLE ® • Select-A-Bit™ Drivers Klenk Long Cut Siding Snips and pre-coated metals l Useful in roofing, flashing, and weatherproofing applications • Pocket Socket® l Designed for steel, aluminum, and vinyl, siding -- • Cutters/Strippers these snips have fine points to get in close to siding • Magnetic Pickup Tools 10-1/2’’ models now with Built-in Wire Cutter! locks and rolled • Flashlights/Work Lights edges! l Unique flat blade • Stak-N-Tote® Trays MODEL # DESCRIPTION CUT • Utility Knives design makes this the easiest • Hammers MA70560 10½" aviation snips, built-in wire cutter, 1½" left/straight cut turning snip • Pry-Angle™ Pry Bars available! • Wrenches MA70570 10½" aviation snips, built-in wire cutter, 1½" right/straight cut • Pliers Available Through Distributors MA70580 10½" aviation snips, built-in wire cutter, 1½" straight cut/slight curves MODEL # DESCRIPTION MODEL # DESCRIPTION CUT Call Toll-free Available Through Distributors 9½" Klenk Aviation Snips, 1¼" left/straight cut 1-800-327-5619 MA70030 MA72000 Large "LONG CUT" Siding Snip, straight cut - 13" long, 2¼" cut MA74520 10½" copper-cutting snips, 1½" left and straight cut, red grip Call Toll-free for your nearest 1-800-327-5619 Klenk Distributor or visit MA70040 9½" Klenk Aviation Snips, 1¼" right/straight cut MA72010 Small Siding Snip, straight cut - 10½" long, 1½" cut MA74530 10½" copper-cutting snips, 1½" right and straight cut, green grip for your nearest www.KlenkTools.com Klenk Distributor or visit MA70050 9½" Klenk Aviation Snips, 1¼" straight cut­­ and slight curves MM20200 Sheath - Length: 12½'', 4½'' wide opening MA74510 10½" copper-cutting snips, 1½" straight cut/slight curves, yellow grip 79-183 www.KlenkTools.com

HVACR Specialty Tools Hand Seamers / Bending Tools HVACR Specialty Tools Knives Klenk® Crimpers Fairmont Tongs Hand Seamers Dual Duct/Insulation Knives l l l l Reduce diameter of round duct, pipe, Better Bending! Better Forming! Better Seaming! Compound-leverage hand seamers 6" blade is serrated or downspouts -- works on metal up to 20 gauge most essential in HVACR and sheet metal trades! on one side and smooth on the make the task easy -- three other different models­­­! l Available with original rosewood handle or with ergonomic rubber molded MODEL # DESCRIPTION handle MA74100 Hand seamers, straight - Jaw Width: 3¼" MA74110 Hand seamers, offset - Jaw Width: 3¼" MODEL # DESCRIPTION MA74120 Hand seamers, straight - Jaw Width: 6" DA71000 Duct , rosewood handle, with sheath MODEL # DESCRIPTION MODEL # DESCRIPTION DA71010 Duct knife, ergonomic rubber handle, with sheath ® MA71250 Five-blade Straight Crimper - Length: 9:", Crimp: 1e" MT14000 Fairmont Tongs, Straight, 9½" long, 3" x 1c" jaw Klenk Notcher MA71260 Five-blade Offset Crimper - Length: 9:", Crimp: 1e" l Drop-forged jaw MT14010 Fairmont Tongs, Offset, 9½" long, 3" x 1c" jaw Duct Board Knives l Notches cleanly without slipping up to 22 MT14020 Fairmont Tongs, Straight w/cushion grips, 9½" long, 3" x 1c" jaw gauge CR l Heavy gauge , made from high carbon steel, are hardened, ground, MT14030 Fairmont Tongs, Offset w/cushion grips, 9½" long, 3" x 1c" jaw l Compound leverage handles with black ® vinyl grips and honed to a sharp edge Klenk Double-cut l Available in 4" and 6" lengths l Proper tool to cut pipe and downspout perfectly -- l Available with or without allows room for the tool to travel -- no bending up! Folding Tools MODEL # DESCRIPTION safety guard, which helps to l Lightweight aluminum is half the weight of other prevent accidents MA77000 Notcher - Length: 8½", Notch: :" folding tools! and serves as a l One-piece aluminium tool has no spot- finger stop when welds to break! cutting with l Ergonomic finger ridges ensure the best Snap Lock Punch increased Safety grip, easy placement, and consistent folds! l Drop-forged jaw pressure. Guard l All models fold 3/8" and 1" depths in 24 gauge l Compound leverage handles with black sheet metal. vinyl grips MODEL # DESCRIPTION MODEL # DESCRIPTION DR68020 Ductboard Knife w/guard, 4'' long x 1'' wide MA77500 12" Lightweight Aluminum Folding Tool - only 10 oz! DR68070 Ductboard Knife w/guard, 6'' long x 1'' wide MODEL # DESCRIPTION MA77510 18" Lightweight Aluminum Folding Tool - only 15 oz! MODEL # DESCRIPTION DR68010 Ductboard Knife w/o guard, 4'' long x 1'' wide MA71500 Pipecutter, Slot/Double Cut - Length: 10½", Cut Length: 1¼" MA77520 24" Lightweight Aluminum Folding Tool - only 20 oz! MA77010 Snap-lock Punch - Length: 8", Jaw Depth: ¼" DR68060 Ductboard Knife w/o guard, 6'' long x 1'' wide Select-A-Bit ™ Multidrivers Select-A-Bit ™ Multidrivers Multidrivers / Nut Drivers Nut Drivers / Tape Measure

™ ® Select-A-Bit™ Multi-Drivers Bit Load: Ratcheting Speed, Classic, and Adjustable Pivot Drivers Hi-Torq Drivers Bit Load: Hi-Torq™ Driver 4-in-1 Pocket Socket Replaces 16 screwdrivers with one multidriver! Ergonomic handle’s 3-sided Four different size sockets -- all in one handle! l Telescoping action yields two socket l Extra long (3") industrial quality, double-ended bits are easier to handle shape maximizes torque sizes at each end -- push out and keep track of than the more common shorter, smaller bits. Hex Roberts Slot Star Phillips force! Slot Phillips Nut in one direction for two sizes l All bits store safely in the handle in separate bit compartments -- the of nut drivers on either end, end cap allows individual bit selection and stays closed during use, 3/32” T15 0 l Handle has a tacky, non-stick 3/16” 1 1/4" push out in the other direc- preventing stored bits from falling out. 1/8” 2 1/4” T20 1 surface, for a non-slip grip—even 1/4” 2 5/16" tion for the other two sizes. 5/32” 3 3/16” T25 2 when wet or oily. l High-torque grip has non-slip surface. 3/16” T30 3 l The included double-ended bits RATCHETING SPEED multidriver operates with a 4:1 ratio -- holding the l Includes SAE socket sizes: 1/4", 3/8", 5/16", 7/16. are hardened tool steel. black collar while turning the handle, the nosepiece turns 4 times for every l ALSO AVAILABLE IN METRIC VERSION! l When no bit is loaded, the tool 1 turn of the handle. Ratcheting is reversible and you can change direction SECURITY multidriver is just like the Classic, but comes with a special set of Socket sizes: 7mm, 8mm, 10mm and 13mm with one hand. security bits, including hex, Roberts, star, and four sizes of spanner bits, plus becomes a 2-in-1 nut driver. a Phillips and slot screwdriver. MODEL # DESCRIPTION DA86420 Pocket Socket ® 4-in-1 Multi-socket, display/12 MODEL # DESCRIPTION DA86427 Pocket Socket ® 4-in-1 Multi-socket -- METRIC, display/12 DA76440 Hi Torq™ 6-in-1 Driver, Standard Bits, display/12 DA76441 Hi Torq™ 6-in-1 Driver, Standard Bits, single unit CLASSIC multidriver includes 16 of the most often used bits, stored right in the handle! 25' Magnetic-tip Tape Measure Bit Load: Security Driver Adjustable-length Hex Nut Drivers l NEW! High visibility color helps you locate easily. l With the large magnetic end hook, one person can easily handle long Retractable nut driver adjusts and locks from 3'' to 6''! measurements. l Easy to read fractions allow for fast and accurate measurements. l Acrylic-coated blade is durable and protects from weather, rust, Hex Spanner Roberts Star Phillips Slot ADJUSTABLE PIVOT multidriver operates with a heavy duty reversible corrosion, and solvents. ratchet mechanism on an adjustable nosepiece that locks into the angle you 1/8” 4 T10 l Ergonomic, rubber-coated case protects tape measure if dropped. 9/64” 6 1 T15 need. 2 7/32” 5/32” 8 2 T20 3/16” 10 T25 l Easy push-button adjustment extends nut driver 3'' to 6". l Comfortable molded grips are color coded by size. MODEL # DESCRIPTION l Magnetic end allows precise placement, helps avoid dropped screws. DA86440 Select-A-Bit™ Ratcheting SPEED Multidriver, display/12 MODEL # DESCRIPTION DA86360 Select-A-Bit™ Classic Multidriver, display/12 DA75610 Adjustable-length Nut Driver, 1/4" hex size DA86390 Select-A-Bit™ Adjustable Pivot Multidriver, display/12 DA75620 Adjustable-length Nut Driver, 5/16" hex size MODEL # DESCRIPTION DA86380 Select-A-Bit™ Security Multidriver, display/12 DA75630 Adjustable-length Nut Driver, 3/8" hex size DA75500 Magnetic-tip tape measure, 25 ft

Cutters-Strippers / Pickup Tools Telescoping Flashlight LED Work Light Stak-N-Tote ® Trays 2 in 1 Cutter/Strippers Telescoping Flashlight/Magnetic Pickup Tool 15 LED Work Light + 3 LED Flashlight Stak-N-Tote® Trays Cut wire with one end, grab With 3 super bright LEDs and a magnet with 2 lbs. of Rechargeable work light mounts to metal surfaces or Angled sides let you see and access parts without and strip wire with the other! pickup power, this is our best flashlight yet -- hangs using its retractable hook for a SUPER BRIGHT unstacking totes! l No stripping holes -- EXTENDS FROM 7'' OUT TO 20''! hands-free work light! l Ideal for organizing, storing and trans- self-adjusts to wire size. porting small parts, fittings, screws, l Hardened, stainless steel, low profile nuts, bolts, and tools while using up jaws cut flush. less storage space in your warehouse, l 5'' model, DA76070, cuts 16 AWG truck, or shop. copper wire and strips stranded wire l Premium-grade galvanized steel is sizes 26 to 16 AWG. strong, sturdy, and corrosion-resistant l 6'' model, DA76080, cuts 10 AWG -- takes the hard knocks. copper wire and strips electrical wire l Magnetic pickup tool also functions as a flashlight for illuminating hard to l All models are stackable with each sizes 14 to 10 AWG. reach areas -- crawl spaces, in and around furnaces and water heaters, other for flexible compact storage. and even under the hood! MODEL # DESCRIPTION l Machined aluminum body has knurled surface for a safe grip and a hex head to keep it from away from your work area. l Use the magnet on the back of the work light, or the retractable hook, to DA76070 Cutter/Stripper for low-voltage wire, 5'' l Three super bright LED lights burn up to 16 hours on fully charged mount or hang work light for a bright, compact, hands-free light source. DA76080 Cutter/Stripper for electrical wire, 6 '' batteries (three LR44 batteries included). l 15 LEDs on main body lights up your work space, while the 3 LEDs in l Flashlight extends out to 20" and collapses to 7½". front turns the device into a powerful hand held flashlight. l Telescoping Light/Pickup Kits l High-power magnet end has 2 lbs. of pickup power! Wall and car chargers are included and both have built-in protection l Five different compartment l Flexible 2" long shaft gets into places few other from overcharging. layouts gives you many options MIRROR - telescopes out to 36'' pickup tools can! for storing many different size l Shaft is rust- and corrosion-resistant. parts and tools. l With 2¼'' round, or 2'' x 3½'' rectangular mirror. l Drain holes prevent moisture l Universal joint adjusts to any angle. EXTENDS 20" build up. l Features rigid, metal shaft with non-slip textured coating. PICKUP - telescopes out to 26'' l Pickup features bright, white LED light at end -- no light bulbs to replace. l Magnet shield directs magnetic force to the tip not to peripheral objects. Front (top) view Magnet on back of Retractable hook is MODEL # DESCRIPTION l Five-pound, rare earth magnet is super strong. of work light work light makes useful to hang work l Uses three button cell batteries (357/SR4 included). features 3 super mounting to metal light for hands-free MB78000 Stak-N-Tote® #2055, 11'' x 20'', 5/5 layout l Features rigid, metal shaft with non-slip textured coating. bright LEDs! surfaces easy! illumination. MB78010 Stak-N-Tote® #2044, 11'' x 20'', 4/4 layout MODEL # DESCRIPTION MODEL # DESCRIPTION MB78030 Stak-N-Tote® #2033, 11'' x 20'', 3/3 layout MODEL # DESCRIPTION DA76470 Telescoping Magnetic Light/Pickup Kit with Round Mirror DA76570 Telescoping flashlight/pickup tool, display/12 MB78040 Stak-N-Tote® #2041, 11'' x 20'', 4/1 layout Rechargeable LED Work Light/Flashlight, includes Wall Charger and Car DA76590 ® DA76475 Telescoping Magnetic Light/Pickup Kit with Rectangular Mirror DA76575 Telescoping flashlight/pickup tool, single unit Charger, single unit MB78070 Stak-N-Tote #PN 11'' x 20'', pipe nipple layout