DOCSLIB.ORG

Verbatim 4 Pages 8,5 X 11

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Verbatim 4 Pages 8,5 X 11 Recordable DVD Media Formats The Current State of Recordable DVD Media Formats CD-R and -RW continue to be the most widely used removable storage technology because of the extremely low cost of drives, players and media. However, with prices for DVD hardware and media dropping, the DVD recordable formats are rapidly gaining acceptance for use in document, video, audio and personal/professional storage. The prime selling points of DVD are its inherent reliability and massive data storage capabilities-- ultimately up to 9.4GB of removable storage with a double-sided disc. According to Wolfgang Schlichting, IDC's Research Manager, Removable Storage, 2002 will be the year when many consumers will discover the benefits of DVD recording. IDC projects that worldwide DVD media sales will climb from 50 million discs in 2002 to nearly 150 million in 2004. While the DVD formats have important technical There are basically two markets for recordable differences, the charts below have been developed DVD: computer storage and A/V recording. While to help content developers and users determine all of the format developers have focused on which media is best for them. providing a single format that will work for both video and computer applications, each DVD General Format Discussion format has its strengths and weaknesses DVD-R, a recordable version of DVD-ROM - The DVD Forum has developed specifications for two Each DVD format has its write-once DVD-R categories - Authoring and strengths and weaknesses General use. Although both types of DVD-R media can be read by nearly all DVD drives and players, technical differences make it impossible to write to Applications DVD-R Authoring media using a consumer DVD-R General system and vice versa. DVD-R General All DVD media formats share common parameters recorders use a 650 nm recording laser for use in a wide range of personal and wavelength while DVD-R Authoring use a 635 nm professional applications. The discs look very laser. In addition, the General Use media contains similar; however, they do not all work in every DVD content protection technology to prevent users drive, DVD-Video player or DVD recorder. from making bit-for-bit copies of CSS- encrypted entertainment titles. Verbatim / April-2002 Recordable DVD Media Formats DVD-R for Authoring was designed to meet the needs of professional content developers and software producers. The media is primarily used to create master discs that will be mass produced by software houses, multimedia/video post- production facilities and archiving. DVD-R for General Use was developed for business and consumer applications - data archiving and one-time video recording. Delivering 2X write performance, which is equivalent to an 18x CD write speed, the media provides secure recording for volumes of information that cannot be accidentally or intentionally altered. The low erasure. Low-cost DVD+R media will be used with storage cost, 100-year data life and broad DVD+R/+RW drives and video recorders compatibility also make DVD-R General media announced by HP, Dell, Philips, Ricoh and Sony. ideal for small-scale distribution of DVD content. DVD-R general discs can be played back by the vast majority of the DVD-ROM drives and video players in use today. Available with street prices as low as $5.00, the media can be used by DVD-R General drives from Pioneer, Apple, Compaq, Sony, Panasonic and other leading manufacturers DVD+R - The write-once DVD+R specification is an extension of the DVD+RW format supported by the DVD+RW alliance: HP, Philips, Ricoh, Sony, Yamaha, Verbatim/Mitsubishi Chemical, Dell and Thomson. Similar in functionality and compatibility to DVD-R General, DVD+R was designed to provide widespread playback on DVD- ROM drives and DVD video players. DVD+R/+RW drives write at 2.4X speed, recording a full DVD disc about 5 minutes faster than 2X writers. DVD+R drives and media provide a reliable, low-cost storage solution for archiving home videos, photos, mixed media presentations and data that require protection from alteration or Verbatim / April-2002 Recordable DVD Media Formats DVD-RW - DVD-RW is officially referred to as DVD-RAM-DVD-RAM (DVD Random Access a "re-recordable" format by the DVD Forum, but is Memory), the rewriteable format developed by the commonly known as a rewriteable format. DVD Forum, provides 100,000 write/rewrite cycles. Available with a capacity of 4.7GB, DVD-RW media DVD-RAM features random write/read support, so is recorded sequentially, making it ideal for data, video and audio can be stored and accessed streaming video applications. DVD-RW media like a hard drive using standard drag-and-drop contains protection technology that prevents techniques. DVD-RAM also offers Defect Sector copying of copyrighted content. Users can write to Management (DSM) to ensure that randomly the disc in multiple sessions as long as the disc has written data is only placed in usable areas of the not been finalized, but DVD drives and players can media and that data is accurately recovered during only read DVD-RW media after the disc has been the read, write processes. No finalization is finalized. Currently offering 1x write performance, required, so users do not have to open and close DVD-RW discs can be overwritten 1,000 times. write sessions. However, the format specifications Most legacy DVD-ROM drives and DVD players, that allow these hard-drive like features also especially those produced in the past two years, renders DVD-RAM media incompatible with most will read DVD-RW media. Available at street DVD-ROM drives and set-top video players. pricing approaching $10.00, DVD-RW discs are Single-sided (4.7GB) and double-sided (9.4GB) used by drives and video recorders from Pioneer, media are available as bare discs or enclosed in a Compaq, Sony and other manufacturers. cartridge, with end-user pricing ranging from $10 to $35. DVD-RAM discs are used with drives and DVD+RW - Introduced in October 2001, video recorders from Panasonic, Hitachi, Toshiba, DVD+RW is a rewriteable format developed by the LaCie, QPS and others. DVD+RW Alliance. Offering 2.4x recording and 1,000 rewrites, the 4.7GB DVD+RW technology is CLV vs. CAV Recording Methods used by consumers for both audio/video and data When selecting a DVD format, the intended storage applications. DVD+RW incorporates application (computer or AV) and the technology lossless linking technology, allowing the drive or used to carry out the recording process should be video recorder to accurately stop and start the considered. Basically, there are two recording writing process, or to replace individual 32kB data methods: Constant Angular Velocity (CAV) which is blocks. Lossless linking improves compatibility, used in high-speed access applications such as performance and ease of use, and permits support computer storage and Constant Linear Velocity of drag-and-drop applications like the Mount (CLV) which is used in streaming video Ranier specification (similar to CD-RW applications. functionality). For PC applications, DVD+RW hardware can optionally support CAV (constant angular velocity) recording to enable fast, random- When selecting a DVD format, access reading of the disc. With multi-session the intended application writing technology, users who have not finalized (computer or AV) and the the disc can quickly add documents, data and technology used to carry out the video segments without having to open and close recording process should be write sessions. By incorporating the +RW considered. specification for defect management, manufacturers ensure that data is accurately written to and read from the disc. DVD+RW media, Most magnetic disk drives use CAV storage, where which is currently available for $10.00 to $15.00, is the drive rotates at a constant rpm (revolutions per compatible with +RW drives and video recorders minute), no matter what section of the disc is being from HP, Philips, Sony, Dell Computer and other read. With the ability to provide quick random leading manufacturers. access, CAV is favored for computer and game read/write storage. Verbatim / April-2002 RecordableRecordable DVD DVD Media Media Formats Formats The DVD-R and DVD-RW formats use CLV technology, the mode used for the various CD When selecting a media brand, formats and DVD-Video. With CLV, the drive rotates users should consider the at different rpms, depending on what track of the manufacturer's reputation for disc the laser is reading, to maintain a constant quality. data transfer rate. The CLV mode enables higher data transfer rates than CAV, which makes it the preferred recording mode for streaming video, but Other problems occur because the player or drive's it slows access when searching for data. capabilities and firmware are marginally designed to meet minimum specifications. As DVD format DVD-RAM, DVD+RW and DVD+R offer a specifications have been finalized, many drive and combination of recording solutions that make player manufacturers have enhanced their read them suitable for both computer and video mechanisms to improve compatibility with the storage. various media. By making sure that the media has been qualified by the drive manufacturer, users can DVD-RAM discs use Zoned CLV (ZCLV), a avoid having to deal with these types of issues. combination of CLV and CAV that allows data to be transferred at a variable rate while the drive spins at Because DVD format specifications have been a constant rate, like a hard disk. finalized at various times since 1997, it is difficult for drive, player or recorder manufacturers to The DVD+RW and DVD+R formats utilize completely eliminate compatibility issues for sequential CLV recording to provide high data Recordable DVD media with all legacy DVD-ROM transfer rates and offer CAV as an option when drives and DVD players.
Load more

Recommended publications
  • ENGLISH ➄ MS-DOS CD-ROM Extensions Available
    CHAPTER 5 GENERAL DESCRIPTION 5.1 FEATURE SUMMARY ➀ Embedded ATAPI Interface. ➁ Automatic Loading with tray. ➂ Horizontal and Vertical Installation. (Vertical : Vertical installation type only, 12 cm Disc only) ➃ Both DVD & CD-R/RW media readable or writable ENGLISH ➄ MS-DOS CD-ROM Extensions Available. ➅ 5 1/4” Half Height Design. 5.2 SYSTEM SET UP The ATAPI Devices are selected by the Address field in the Drive Select Register. When a single Device is attached to the interface, it shall be set as Device 0. When the ATAPI Device is attached along with an ATA Mass Storage Device, the ATAPI Device will be set as Device 1 and respond as a Slave. 5.3 POWER SAVING ➀ When the drive waits for a command from the Host for more than two minutes, then the drive enters Power Save Mode. Laser and Spindle motor stop. ➁ Re-start is automatic when the Host Command is received or eject button is pushed. NOTE : • ATAPI : AT Attachment Packet Interface. • MS-DOS and MS Windows are trademarks or registered trademarks of Microsoft Corporation. • IBM PC-AT is a registered trademark of International Business Machines Corporation. A-9 CHAPTER 6 SPECIFICATION SUMMARY 6.1 PERFORMANCE ➀ Disc diameter 12cm, 8cm (CD-ROM / DVD-ROM) ➁ Disc speed CD-ROM (CAV mode) *1 8560 r/min DVD (CAV mode) 6895 r/min ➂ Data capacity CD : 703 / 797 Mbytes [ typical ] (Mode 1/ Mode 2) (79 min and 58 sec disc) DVD : 4.7 Gbytes (DVD-R) 4.7 Gbytes (Single Layer) 8.5 Gbytes (Dual Layer) 9.4 Gbytes (Single Layer Double Side) ➃ Data transfer Rate CD reading CD-ROM (CAV mode) 2597 ~ 6000
    [Show full text]
  • Care and Handling of Cds and Dvds
    A GUIDE FOR LIBRARIANS AND ARCHIVISTS Care and Handling of CDs and DVDs by Fred R. Byers, October 2003 Council on Library and Information Resources National Institute of Standards and Technology Care and Handling of CDs and DVDs A Guide for Librarians and Archivists by Fred R. Byers October 2003 Council on Library and Information Resources Washington, DC ii iii About the Author Fred R. Byers has been a member of the technical staff in the Convergent Information Systems Division of the Information Technology Laboratory at the National Institute of Standards and Technology (NIST) for more than six years. He works with the Data Preservation Group on optical disc reliability studies; previously, he worked on the localization of defects in optical discs. Mr. Byers’ background includes training in electronics, chemical engineering, and computer science. His latest interest is in the management of technology: he is currently attending the University of Pennsylvania and expects to receive his Executive Master’s in Technology Management (EMTM) degree in 2005. Council on Library and Information Resources The Council on Library and Information Resources is an independent, nonprofit organization dedicated to improving the management of information for research, teaching, and learning. CLIR works to expand access to information, however recorded and preserved, as a public good. National Institute of Standards and Technology Founded in 1901, the National Institute of Standards and Technology is a nonregulatory federal agency within the Technology Administration of the U.S. Department of Commerce. Its mission is to develop and promote measurement, standards, and technology to enhance productivity, facilitate trade, and improve the quality of life.
    [Show full text]
  • Robust Control Design Strategies Applied to a DVD-Video Player Giampaolo Filardi
    Robust control design strategies applied to a DVD-Video player Giampaolo Filardi To cite this version: Giampaolo Filardi. Robust control design strategies applied to a DVD-Video player. Automatic. Université Joseph-Fourier - Grenoble I, 2003. English. tel-00197521 HAL Id: tel-00197521 https://tel.archives-ouvertes.fr/tel-00197521 Submitted on 14 Dec 2007 HAL is a multi-disciplinary open access L’archive ouverte pluridisciplinaire HAL, est archive for the deposit and dissemination of sci- destinée au dépôt et à la diffusion de documents entific research documents, whether they are pub- scientifiques de niveau recherche, publiés ou non, lished or not. The documents may come from émanant des établissements d’enseignement et de teaching and research institutions in France or recherche français ou étrangers, des laboratoires abroad, or from public or private research centers. publics ou privés. UNIVERSITE´ JOSEPH FOURIER - GRENOBLE given by the library PHD THESIS For obtaining the degree of DOCTEUR DE L'UJF Special field : Automatique { Productique prepared at the Laboratoire d'Automatique de Grenoble - INPG in the context of the Ecole´ Doctorale Electronique,´ Electrotechnique,´ Automatique, T´el´ecommunications, Signal presented and sat by Giampaolo FILARDI the 1st of December 2003 Title: ROBUST CONTROL DESIGN STRATEGIES APPLIED TO A DVD-VIDEO PLAYER PHD supervisors : Alina VODA-BESANCON Olivier SENAME JURY M. M. de MATHELIN Examiner Professor at the ENSP Strasbourg M. J. STOUSTRUP Examiner Professor at the Aalborg University, DK M. P. NONIER Examiner Project leader at ST Microelectronics M. H. J. SCHROEDER Examiner Project leader at ST Microelectronics Mme A. VODA-BESANC¸ON PHD supervisor Ma^ıtre de conf´erences `a l'UJF-LAG M.
    [Show full text]
  • Understanding CD-R and CD-RW
    Understanding CD-R & CD-RW Revision 1.00 January 2003 © 2002, OPTICAL STORAGE TECHNOLOGY ASSOCIATION (OSTA) This document is published by the Optical Storage Technology Association (OSTA), 19925 Stevens Creek Blvd., Cupertino, California 95014. Telephone: (408) 253-3695. Facsimile: (408) 253-9938. World Wide Web home page: http://www.osta.org. “OSTA” is a trademark registered in the United States Patent and Trademark Office. Products and services referenced in this document are trademarks or registered trademarks of their respective companies. Understanding CD-R & CD-RW v. 1.00 Optical Storage Technology Association (OSTA) Market Development Committee Author’s Notes It’s often said that the only constant in the computer and consumer electronics industries is change. Nonetheless, CD-R and CD-RW have remained a constant and trusted companion for many. CD-R and CD-RW technologies have, of course, evolved over the years but change here has come in practical and tangible improvements to quality, performance and ease of use. Unique compatibility and affordability, at the same time, have made CD-R and CD-RW the popular storage choice of industry and consumers alike. This paper replaces OSTA’s earlier “CD-R & CD-RW Questions & Answers” document. Like its predecessor, it seeks to answer basic questions about CD-R and CD-RW product technology in an understandable and accessible way and to provide a compass pointing to sources of further information. If you have suggestions to improve the effectiveness of this paper, please feel free to contact the author by email: [email protected]. Sincerely, Hugh Bennett, President Forget Me Not Information Systems Inc.
    [Show full text]
  • Interactive Video Based Training Systems
    University of Central Florida STARS Retrospective Theses and Dissertations 1987 Interactive Video Based Training Systems Roy H. Hightower University of Central Florida Part of the Engineering Commons Find similar works at: https://stars.library.ucf.edu/rtd University of Central Florida Libraries http://library.ucf.edu This Masters Thesis (Open Access) is brought to you for free and open access by STARS. It has been accepted for inclusion in Retrospective Theses and Dissertations by an authorized administrator of STARS. For more information, please contact [email protected]. STARS Citation Hightower, Roy H., "Interactive Video Based Training Systems" (1987). Retrospective Theses and Dissertations. 5093. https://stars.library.ucf.edu/rtd/5093 INTERACTIVE VIDEO BASED TRAINING SYSTEMS BY ROY H. HIGHTOWER B.I.E., Georgia Institute of Technology, 1982 RESEARCH REPORT Submitted in partial fulfillment of the requirements for the degree of Master of Science 1n the Graduate Studies Program of the College of Engineering University of Central Florida Orlando, Florida Fall Term 1987 ABSTRACT The training community has focused considerable attention on interactive video technology which in recent years has become · a popular method of delivery for training applications utilizing mi crocomputers. This paper identifies the classifications of interactive video and addresses the hardware, software and processes required to utilize the technology for training applications. The capabilities and limitations of the technology are discussed with respect to the various video devices which are utilized. The major advantages of interactive video identified include the capability to combine computer graphics with video; the ability to deliver realistic video simulation; and the ability to store, sort, and retrieve video still images or full motion sequences on demand.
    [Show full text]
  • Verbatim 4 Pages 8,5 X 11
    Recordable DVD Media Formats The Current State of Recordable DVD Media Formats CD-R and -RW continue to be the most widely used removable storage technology because of the extremely low cost of drives, players and media. However, with prices for DVD hardware and media dropping, the DVD recordable formats are rapidly gaining acceptance for use in document, video, audio and personal/professional storage. The prime selling points of DVD are its inherent reliability and massive data storage capabilities-- ultimately up to 9.4GB of removable storage with a double-sided disc. According to Wolfgang Schlichting, IDC's Research Manager, Removable Storage, 2002 will be the year when many consumers will discover the benefits of DVD recording. IDC projects that worldwide DVD media sales will climb from 50 million discs in 2002 to nearly 150 million in 2004. While the DVD formats have important technical There are basically two markets for recordable differences, the charts below have been developed DVD: computer storage and A/V recording. While to help content developers and users determine all of the format developers have focused on which media is best for them. providing a single format that will work for both video and computer applications, each DVD General Format Discussion format has its strengths and weaknesses DVD-R, a recordable version of DVD-ROM - The DVD Forum has developed specifications for two Each DVD format has its write-once DVD-R categories - Authoring and strengths and weaknesses General use. Although both types of DVD-R media can be read by nearly all DVD drives and players, technical differences make it impossible to write to Applications DVD-R Authoring media using a consumer DVD-R General system and vice versa.
    [Show full text]
  • Chapter 12. Optical Disks
    Chapter 12. Optical Disks After the human memory, optical storage is perhaps the oldest storage technology in use. When cavemen started making scratches on the walls of their caves, we have not only an application of write-once ready-many (WORM) technology, but a data encoding method as well! However the modern optical storage devices have a relatively short history as the first laser disk was only demonstrated in 1972. This was the 12-inch Laservision, a video disk in which the video signal was stored in an analog form similar to the present video cassette recorders. Later in 1975, Philips together with Sony defined the standard for the 5-in audio CD (compact disc). This is a read-only device, but the audio information is stored digitally. The EFM (eight-to-fourteen modulation) coding scheme invented by Philips continues to generate income by way of license and royalty fees that contributes a significant proportion to the total budget of their R&D activities. Optimem demonstrated in 1977 the first 12-inch writeable (once) disk (WORM). So far the devices developed were targeted at the consumer audio-visual market. In 1980, Philips and Sony introduced a version of the CD that is used for storing digital data for computer applications. As this acts as a memory device, it was called the CD-ROM. Finally in 1987, Sony demonstrated the erasable and rewritable 5.25-inch optical disk drive. Recently products became available enabling the user to create his own CD-ROM using a write-once disk. 12.1. Types of Optical Disk Although there are many different types of optical disks, they can be grouped into three main categories.
    [Show full text]
  • Understanding Recordable & Rewritable DVD First Edition
    Understanding Recordable & Rewritable DVD First Edition April 2004 Information contained in this white paper has been obtained by the author from sources believed to be reliable. Neither the author nor the Optical Storage Technology Association (OSTA) warrant the accuracy nor completeness of such information. Responsibility for the use of the contents shall remain with the user and not with the author nor with OSTA. © 2004, OPTICAL STORAGE TECHNOLOGY ASSOCIATION (OSTA) This document is published by the Optical Storage Technology Association (OSTA), 19925 Stevens Creek Blvd., Cupertino, California 95014. Telephone: (408) 253-3695. Facsimile: (408) 253-9938. World Wide Web home page: http://www.osta.org. “OSTA” is a trademark registered in the United States Patent and Trademark Office. Products and services referenced in this document are trademarks or registered trademarks of their respective companies. Understanding Recordable & Rewritable DVD First Edition Optical Storage Technology Association (OSTA) Market Development Committee Author’s Notes In the continuing evolution of writable optical storage beyond CD-R and CD-RW, recordable and rewritable DVD meet the expanded demands of personal and professional video as well as still uncharted applications. This document is a compliment to my earlier “Understanding CD-R & CD-RW” white paper. Thus, explanations are provided to satisfy essential questions about DVD-R, DVD+R, DVD-RW, DVD+RW and DVD-RAM product technology and offer direction to sources of further information. Suggestions to improve the accuracy, completeness or effectiveness of this paper are welcomed by the author who can be contacted by email: [email protected]. Sincerely, Hugh Bennett, President Forget Me Not Information Systems Inc.
    [Show full text]
  • Magnetic Disks
    Computer Organization & Assembly Language Programming CSE 2312 Lecture 7 Secondary Memory 1 Memory Hierarchies • Access time gets bigger – several ns, several 10 ns, 10ms, several s • Storage capacity – 128 bytes, several megabytes, 10-1000 megabytes, 1-10 gigabytes, budgets, budgets • No of bits per dollar increases – Change rapidly A five-level memory hierarchy. 2 Magnetic Disks • Magnetic Disk – Consists of one or more platters with a magnetizable coating – A disk head containing an induction coil floats just over the surface, resting on a cushion of air • Scheme – When a positive or negative current passes through the head, it magnetizes the surface just beneath the head, aligning the magnetic particles face right or left, depending on the polarity of the drive current – When the head passes over a magnetized area, a positive or negative current is induced in the head, making it possible to read back the previously stored bits • Track – The circular sequence of bits written as the disk makes a complete rotation called a track • Sector – Each track is divided into some sector with fixed length, typically, 512 bytes 3 Disk Track A portion of a disk track. Two sectors are illustrated. • Sector – Preamble: allow the head to be synchronized before reading or writing – Data bits – Error Correcting Code: either a Hamming code, or Reed-Solomon code • Intersector gap – Between consecutive sectors 4 Platter A disk with four platters. • Most disks – Consist of multiple platters stacked vertically – Each surface has its own arm and head. All arms are ganged together so they move to different radial positions all at once 5 Disk Performance • Seek – To read/write a sector, the arm must be moved to the right radial direction first – Seeking time: Average 5 – 10 ms • Rotational Latency – The delay until the desired sector rotates under the head once after the head is positioned radially – Average delay, 3- 6 ms, for disk rotation speed 5400RPM 7200RPM 10800RPM • Transfer Time – Depending on the linear density and rotation speed.
    [Show full text]
  • Chapter 6 External Memory Computer Organization and Architecture
    Computer Organization and Architecture Types of External Memory Chapter 6 • Magnetic Disk External Memory — RAID — Removable • Optical — CD-ROM — CD-Recordable (CD-R) — CD-R/W — DVD • Magnetic Tape • Flash memories are often used as a “solid-state drives” Magnetic Disk Read and Write Mechanisms • Disk substrate coated with magnetizable • Recording & retrieval via conductive coil called a head material (iron oxide…rust) • May be single read/write head or separate ones • During read/write, head is stationary, platter rotates • Substrate used to be aluminium • Write • Now glass or ceramic — Current through coil produces magnetic field — Pulses sent to head — Improved surface uniformity — Magnetic pattern recorded on surface below – Increases reliability • Read (traditional) — Reduction in surface defects — Magnetic field moving relative to coil produces current – Reduced read/write errors — Coil is the same for read and write — Lower flight heights (See later) • Read (contemporary) — Separate read head, close to write head — Better stiffness — Partially shielded magneto resistive (MR) sensor — Better shock/damage resistance — Electrical resistance depends on direction of magnetic field — High frequency operation – Higher storage density and speed Inductive Write MR Read Data Organization and Formatting • Concentric rings or tracks — Gaps between tracks — Reduce gap to increase capacity — Same number of bits per track (variable packing density) — Constant angular velocity (rotational speed is constant so linear velocity varies) • Tracks divided
    [Show full text]
  • Evolutionary Algorithms Based Speed Optimization of Servo Motor in Optical Disc Systems
    Evolutionary Algorithms Based Speed Optimization of Servo Motor in Optical Disc Systems Radha Thangaraj1, Millie Pant1 and Ajith Abraham2 1Indian Institute of Technology Roorkee, India 2Norwegian University of Science and Technology, Norway [email protected], [email protected], [email protected] Abstract a wide range of engineering optimization problems [10] - [14] etc. In this study we investigate the Evolutionary Algorithms are inspired by biological performance of PSO and DE for optimizing the and sociological motivations and can take care of average bit rate of an optical disc servo system. optimality on rough, discontinuous and multimodal Servo motor is one of the most sophisticated motion surfaces. During the last few decades, these algorithms control devices in electric motors. In CD-ROM or have been successfully applied for solving numerical DVD ROM, the objective function mainly consists of bench mark problems and real life problems. This maximizing the average bit transfer rate subject to paper presents the application of two popular various constraints due to servo motor, control circuits Evolutionary Algorithms (EA); namely Particle Swarm decoding electronics etc. In the present article we have Optimization (PSO) and Differential Evolution (DE) taken a popular yet complex problem of CD/ DVD for optimizing the average bit rate of an optical disc ROM systems where the objective is to optimize the servo system. Two optimization models are considered speed of the servo motor. We considered two cases of in the present study subject to the various constraints optimization (i) average bit rate in seeking and (ii) due to servo motor. The results obtained by PSO and average bit rate of zoned CLV.
    [Show full text]
  • Optical Drives
    Optical Drives Last updated 3/30/21 Optical Disks • CD • Originally developed to replace LPs • Late 70’s • Audio • Smaller • Longer life – no wear damage • Manufactured EE 4980 – MES 2 © tj Optical Disks • CD • Multiple variations • CD-DA – Digital Audio • CD-ROM – Read only • CD-R – Write once • CD-RW – Write many EE 4980 – MES 3 © tj Optical Disks • CD • Functional block diagram - Read * Sorin Stan EE 4980 – MES 4 © tj Optical Disks • CD - Mechanical • CD-DA and CD-ROM • Data is pressed onto the disk • Spiral tracks – 1.5um to 1.7um centers • Pits and Lands • Pits – 0.6um wide • Pits – 0.9um – 3.3um long * Sorin Stan * Sorin Stan EE 4980 – MES 5 © tj Optical Disks • CD - Mechanical • Simplified Optics • 780nm laser • 3mW output • Split into 3 beams • Reflects off CD and back onto a multi sensor detector • The pits are designed to cause a quarter wavelength destructive interference → low reflected signal * Sorin Stan EE 4980 – MES 6 © tj Optical Disks • CD - Mechanical • Interference EE 4980 – MES 7 © tj Optical Disks • CD - Mechanical • 3 beam configuration • 1 central beam – data • 2 radial beams – tracking * Sorin Stan EE 4980 – MES 8 © tj Optical Disks • CD - Mechanical • 3 beam detector • Astigmatic focus detection • Central spot signal = Fn(A,B,C,D) • Twin spot radial detection * Sorin Stan * Sorin Stan EE 4980 – MES 9 © tj Optical Disks • CD - Mechanical • Astigmatic focus detection • Astigmatism intentionally introduced into the optics (rotation of focus) * Sorin Stan EE 4980 – MES 10 © tj Optical Disks • CD - Mechanical • Laser/Detector
    [Show full text]