Itrio, Wireless HDMI Transmitter/Receiver!
Total Page:16
File Type:pdf, Size:1020Kb
DATASHEET : EM7100 iTRIO, Wireless HDMI transmitter/receiver! Sends your wireless A/V signal over long distances (up to 30 meters)! • Supports HDMI, Scart, YPbPr and VGA signals • Built-in IR transmitter and repeater for your remote control • Supports 480p, 720p, 1080i en 1080p (50/60 en 24p) HD video signals • Can be connected over wired LAN cable (optional) • Small form factor & design • Conforms to HDCP spec • Includes remote control to quickly switch between connected A/V sources • Easy installation • 5-Year warranty • Accessible helpdesk • Multilingual user manual Wireless HDTV everywhere. Wireless HDTV all through your house. It becomes a possibility with the EM7100 Wireless HDMI set. The transmitter and reciever are a perfect companion for you home cinema experience. Just connect the cable of your media player or Blu-Ray player to the transmitter, and your HDTV to the reciever. Eminent lets you enjoy razor-sharp 1080p video everywhere in your house. Just pick up the remote control and start enjoying your favourite movies or tv-series! Up to fourty meters range through walls or ceiling The EM7100’s transmitter and reciever can be placed up to 30 meters apart. Even when there are walls or ceiling in the way. We’ve also included an infrared function in the EM7100 Wireless HDMI set, so that the remote control of your Media or BluRay-player will keep working wherever the unit is TECHNICAL SPECIFICATIONS : placed. Just point the remote at the EM7100, and it will re-transmit the signals to your devices. Signal Input (Transmitter): HDMI × 2 up to 1080p (60Hz), 1920x1080 Composite or SCART(HALF) × 1 Save space VGA/Component × 1 You can use the EM7100 to keep all your devices out of sight. Connect your devices to the EM7100’s Audio Mini-jack input 1x transmitter unit, and place it anywhere you want. The only thing you place near your HDTV is the Stereo audio: Analog, 48kHz 16-bit ADC reciever unit, which is so small that you could even place it out of sight, behind the tv! Signal Output (Receiver): HDMI × 1 up to 1080p(60Hz), 1920*1080 Composite or SCART(HALF) × 1 Four devices at the same time Component × 1 You can connect up to four devices to your EM7100 HDMI transmitter at the same time. The unit has Stereo audio : Analog, 48kHz 16-bit ADC two HDMI ports, one VGA port (for laptop or PC) and also features a classic SCART connector for Encoding: H.264 your VCR or game console. You can just sit back in your chair, and switch between these devices, Baseline profile with Level 4.2 without walking over to the transmitter, thanks to the included remote control. Wireless Connection: Supporting IEEE802.11n MIMO Interface Plug and Play Wired Connection: RJ-45 LAN Port The EM7100 HDMI set is extremely easy to connect. Just plug in the cables, and you are done. Ad- Connection to PLC modem vanced users will find that the included user manual explains any and all technical matters cleary. Direct Connection(LAN Cable) IR Blaster: 3 IR flashers type A perfect match for Eminent Media players Antenna: Internal antenna The EM7100 HDMI set is fully compatible with all of the Eminent hdMEDIA players. With a hdMEDIA Remote Control: Included player you can download movies and tv-series, and watch them directly on your HDTV. Use the USB port(Receiver): For firmware upgrade EM7100 HDMI set to connect your hdMEDIA to a HDTV anywhere in your house wirelessly. Size (W×D×H): 195 × 103 × 28mm Weight: Transmitter (270g)/ Receiver (270g) Also supports SD resolution Power consumption: 12V 2A With the HDMI ports in the EM7100 HDMI set you’ll always enjoy the highest possible picture quality. If you do not have a HDTV , or use legacy-based SCART equipment, you can still connect the EM7100 EAN CODE: 8716065256093 by SCART. (No downscaling of HD material will occur, you can only use SCART devices on SD.) Being part of it ©2010 EMINENT.