Single Board Computer iW-RainboW-G27S i.MX8 Quad Max/ Quad Plus Pico-ITX SBC
The i.MX8 Quad MAX/Quad Plus Pico ITX SBC integrates Dual Cortex A72 + Quad Cortex A53 Cores, Dual GPU systems, 4K H.265 capable VPU dual failover-ready display controller based i.MX8 QuadMax SoC with on Dual 10/100/1000 Mbps Ethernet PHY,USB 3.0 hub and IEEE 802.11a/b/g/n/ac Wi-Fi & Bluetooth 5.0 module.
This board offer maximum performance with higher efficiency for complex consumer, medical and industrial embedded computing applications. With the 100mm x 72mm Pico-ITX form factor, the SBC is highly packed with all the necessary on-board connectors.
APPLICATIONS: Remote Energy Management, Intelligent Edge, Augmented & Virtual Reality, 4K Media Streaming, Industrial Automation, Automotive eCockpit
iW-RainboW-G27S SPECIFICATIONS
HIGHLIGHTS CPU: i.MX8 QM/QP/DM Processor Expansion Connector 2 i.MX8QuadMax: 2 x Cortex-A72, 4 x Cortex-A53 & 4 lane MIPI CSI x 1 Dual Complex Core System: 2 x Cortex- M4F 4 lane LVDS x 2 i.MX8QuadPlus: 1 x Cortex-A72, 4 x Cortex-A53 & MIPI CSI I2C x 1 Port Complex 1: 4 x Cortex-A53 @ 1.2 GHz 2 x Cortex- M4F Power: PWM x1 Port SPI x 1 Port Complex 2: 2 x Cortex-A72 @ 1.8 GHz PF8100 Memory: M41 UART x 1 Port LPDDR4 - 4GB (Expandable up to 8GB)2,3 Expansion Connector 3 2 x Cortex-M4F @ 264 MHz for advanced system eMMC Flash - 16GB (Expandable)3 4 lane MIPI CSI x 1 Micro SD Slot 4 lane MIPI DSI x 1 4 control Network & Communication SAI x 1 Port Gigabit Ethernet PHY Transceiver with QSPI x 1 Port RJ45 Magjack Connector x 2 DMA_I2C x 1 Port 4K H.265 decode & 1080p h.264 enc/deccapable USB3.0 High Speed Hub through dual stack MIPI CSI I2C x 1 Port Type - A Connector CAN x 1 Port VPU USB 2.0 OTG port through - micro AB Receptacle M40UART x 1 Port Connector UART x 1 Port IEEE 802.11 a/b/g/n/ac Wi-Fi & BT 5.0 RS232 X 1 M.2 Connector Key B PCIe x 2 Enhanced Vision Capabilities (via GPU) CAN x 1 SATA x 1 Operating System USB 2.0 x 1, USB 3.0 x 1 Linux 4.14.98 I2S x 1, I2C x 1 Android Pie 9.0.0, QNX 7.0.0 IEEE 802.11a/b/g/n/ac Wi-Fi & Bluetooth 5.0 HSIC x 1 Audio/Video Features: Nano SIM Connector HDMI output through HDMI (TypeA) connector 4 Miscellaneous Interfaces Dual 1000/100/10 Mbps Ethernet HDMI Input through micro HDMI (Type D) Connector Debug UART Connector 4 40Pin eDP Display Connector (Optional) JTAG Header (Optional) I2S Audio Codec Tamper Header (Optional) Up to 8GB LPDDR4 memory 3.5mm Audio IN/OUT RTC Battery Connector Expansion Connector 1 Power Supply: 4 lane MIPI DSI x 1 12V, 2A input through External Adaptor 4 lane LVDS x 2 Operating Temperature:-40 °C to +85 °C Ultra-compact form size 100mm x 72mm CAN/SPDIF x1 Port Form Factor: 100mm X 72mm DMA_I2C x 1 Port Environment Specification: SPI x 1 Port RoHS2 and REACH Compliance -40 to +85°C Operation 1 There are 2 Congurations of i.MX8 Processor, hence in this document i.MX8 is used to represent either i.MX8QM or i,MX8QP based on the part number. 2 The i.MX8 can support up to 16GB RAM but considering available LPDDR4 conguration, it can support 8GB by using two 4GB chips.If 8GB (64GB) chips are available
3 then 16GB DDP can be supported. Memory Size will differ based on iWave’s product part number. 4 This i.MX8 support HDMI or eDP through some pins, hence anyone can be supported at a time based on the SBC part number.
www.iwavesystems.com i.MX8 Quad Max/ Quad Plus Pico-ITX SBC
12V On -Board 12V Power Jack LPDDR4 (64bit) LPDDR4 - 4GB DDR CH0 To On -board Regulators (Upgradable) DDR CH1 Peripherals 3V RTC Coin cell PMIC PMIC Interface Gigabit Header MMC(8bit) eMMC – 16GB RGMII Gigabit Ethernet eMMC0 ENET0 Ethernet Left Conn (Upgradable) PHY SD1 x 1 Gigabit RJ45 Conn Micro SD Dual Ganged SDHC1 RGMII Gigabit Ethernet Ethernet Connector ENET1 PHY Right Conn SD2 x 1 SDHC2 Antenna Conn. USB Device/OTG x 1 UART x1 USB OTG1 USB 2.0 Conn Wi -Fi & BT UART1 Antenna Conn. Module with ESAI x1 Antenna ESAI 0 USB OTG2 USB2.0 Top Nano SIM Conn. PCIe x 1 USB3.0 USB3.0 HUB USB 3.0 Stack PCIe1 2 SIM USB_SS3 USB3.0 (3ports ) Host x 2 Bottom PCIe x 1 USB2.0 x 1
PCIe/USB3.0 SW USB3.0 x 1 HDMI RX HDMI RX x1 Micro HDMI Conn
SATA x 1 2 PCIe2/SATA 1 HDMI TX/ eDP HDMI TX M.2 Module PCIe/SATA SW PCIe x 1 HDMI TX/eDP HDMI Flag Conn Connector PCIe0 eDP key B HSIC x 1 USB_HSIC 40 Pins eDP Conn SAI x 1 SAI0 MIPI DSI x1 4lanes USB2.0 x 1 MIPI DSI0 MIPI DSI0 I2C0 MIPI DSI I2C x1 I2C x 1 i.MX8 QM/QP LVDS x 2 Channel LVDS1_CH0 DSI x 4lanes LVDS I2C x 1 60 pins MIPI DSI1 LVDS1_CH1 Expansion I2C x 1 SPDIF/CAN1 x 1 Header -1 CSI x 4lanes LVDS1 I2C0 SPDIF/FLEXCAN1 3 CSI I2C x 1 MIPI CSI1 SPI x 1 MIPI_CSI1_I2C0 SPI3 UART x 1 UART3 DMA_I2C2 I2C x 1 60 pins DMA_I2C x 1 DMA_I2C1 MIPI CSI x1 4lanes Expansion MIPI CSI0 SAI x 1 4 Header -3 SAI2 MIPI CSI0 I2C0 MIPI CSI I2C x1 CAN x 1 FLEXCAN2 LVDS x 2 Channel GPIOs LVDS0_CH0 60 pins GPIOs LVDS0_CH1 LVDS I2C x 1 Expansion QSPI x 1 LVDS0 I2C0 QSPI1A Header -2 UART/I2C x 1 UART/I2C x 1 M4-0 UART/I2C M4-1 UART/I2C SCU Boot Mode SPI x 1 Boot Mode SW SCU Boot SPI2 Mode CAN x 1 Tamper FLEXCAN0 Tamper Header TAMPER CAN Transceiver CAN Header UART x 1 SAI x 1 Debug UART UART4 SAI1 Header I2C x 1 I2S Audio Codec Audio In/Out Jack SCU UART x 1 DMA_I2C1 20pin Header SCU_UART0 (Optional) JTAG UART x1 RS232 RS232 Header SJC UART0 Transceiver Notes:
1 Either eDP interface or HDMI TX is supported. By Default HMDI is Supported. 2 PCie0 is connected to Wi-Fi BT Module and M.2 Connector. By default M.2 Connector is supported.
3 Either FLEXCAN1 or SPDIF is supported. BY default FLEXCAN1 is supported
4 SAI2 Receive mode 5 HSIC is optional feature
OS SUPPORT DELIVERABLES OPTIONAL KITS/MODULES CUSTOM DEVELOPMENT Linux 4.14.98 i.MX8QM Pico ITX SBC Heat Sink BSP Development/OS Porting Android Pie 9.0.0 Board Support Package Industrial Enclosure Custom SOM/Carrier Development QNX 7.0.0 User Manual Custom Application/GUI Development Design Review and Support
iWave Systems Technologies, established in 1999, focuses on Product Engineering Services involving Embedded Hardware, Software & FPGA. The company designs and develops cutting edge products and solutions. iWave has been an innovator in the development of highly integrated, high performance, low power and low cost System On Modules and Development Platforms. iWave’s expertise has brought out multiple SOMs based on ARM, Freescale, Intel Atom, Marvell and TI Processors.
iWave Systems has won the confidence of its customers over the years by being a reliable partner in developing innovative products. Our engineers combine outstanding System design experience to deliver Quality Solutions. iWave specializes across Industrial, Automotive and Medical domains. We support our customers by being time efficient, which in turn helps our customers accelerate time to market their products. iWave is a Windows embedded Silver partner and a winner of the Partner Excellence Award. Note: iWave reserves the right to change these specifications without notice as part of iWave’s Ordering the i.MX8 QM/ QP Pico-ITX SBC continuous effort to meet the best of breed specification. The registered trademarks are
proprietary of their respective owners. The board can be ordered online from the iWave Website -BR-R1.0
*Optional items are not included in the standard deliverables http://www.iwavesystems.com/webforms IW-G27S iWave Systems Tech. Pvt. Ltd., iWave Europe 7/B, 29 thMain, BTM Layout 2 nd Stage, Postbus 6197 Bangalore-560076,India. 3130 DD Vlaardingen Ph:+91-80-26683700, 26786245 The Netherlands Email: [email protected] Ph: +31 10 28403383 www.iwavesystems.com Email: [email protected] Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
iWave Systems: iW-G27S-SCQM-4L004G-E016G-BIC iW-G27S-SCQM-4L008G-E032G-BIC