HANDBOOK Access to the Handbook

C4 HANDBOOK Access to the Handbook

The Handbook is available on the CITROËN website, in the "MyCitroën" section or at the following address: From the appropriate Store, download the Scan MyCitroën http://service.citroen.com/ddb/ application for smartphone.

Select: - the language, - the vehicle, its body style, - the print edition of your handbook appropriate for the date of 1st registration of your vehicle.

Then select: - the vehicle, - the print edition appropriate for the date of 1st registration of your Direct access to the Handbook. vehicle. Download the content of the vehicle's Handbook.

This symbol indicates the latest information available. Welcome

Thank you for choosing a Citroën C4 Cactus. In this document you will find all of the instructions and This document presents the information and recommendations required recommendations on use that will allow you to enjoy your vehicle to the for you to be able to explore your vehicle in complete safety. fullest. It is strongly recommended that you familiarise yourself with it as well as the Maintenance and Warranty Guide which will provide you Your vehicle will be fitted with only some of the equipment described in with information about warranties, servicing and roadside assistance this document, depending on its trim level, version and the specification associated with your vehicle. for the country in which it was sold. The descriptions and illustrations are given as indications only. Key Automobiles CITROËN reserves the right to modify the technical Safety warning specifications, equipment and accessories without having to update this edition of the guide. Additional information If ownership of your vehicle is transferred, please ensure this Complete Contributes to the protection of the environment Handbook is passed on to the new owner.

Left-hand drive vehicle

Right-hand drive vehicle Contents

Overview . Access Lighting and visibility Instruments and controls 4 Remote control and key 31 Lighting control stalk 61 Keyless Entry and Starting 33 Direction indicators 62 Central locking 35 Automatic illumination of headlamps 63 Recommendations 35 Daytime running lamps/Sidelamps (LEDs) 63 Emergency procedures 36 Parking lamps 64 Eco-driving . Doors 39 Guide-me-home lighting 64 Eco-driving 6 Boot 39 Headlamp beam height adjustment 64 Alarm 40 Cornering lighting 65 Front electric window controls 41 Wiper control stalk 65 Rear door windows 42

Dashboard instruments Safety Instrument panel 8 Warning and indicator lamps 9 General safety recommendations 69 Hazard warning lamps 70 Indicators 20 Ease of use and comfort Horn 70 Touch screen 24 Front seats 43 Emergency or assistance call 70 Trip computer 27 Rear seats 45 Electronic stability control (ESC) 72 Distance recorders 28 Steering wheel adjustment 46 Grip control 74 Setting the date and time 29 Mirrors 46 Lighting dimmer 30 Ventilation 48 Seat belts 75 Recommendations for ventilation and air Airbags 78 conditioning 49 Child seats 81 Heating/Manual air conditioning 50 Deactivating the front passenger airbag 82 Automatic air conditioning 51 ISOFIX mountings and child seats 88 Recirculation of interior air 53 i-Size child seats 91 Front demisting – defrosting 54 Child lock 93 Rear screen demisting – defrosting 54 Courtesy lamps 54 Boot lamp 55 Panoramic glazed sunroof 55 Interior fittings 56 Boot fittings 59 Rear parcel shelf (commercial version) 60 2 Contents .

Driving Practical information Technical data Driving recommendations 94 Compatibility of fuels 136 Engine technical data and towed loads 176 Anti-theft protection 95 Fuel tank 137 Engines and towed loads – Petrol 177 Starting/Switching off the engine Misfuel prevention (Diesel) 138 Engines and towed loads – Diesel 178 with the key 96 Snow chains 138 Dimensions 179 Starting/Switching off the engine with Very cold climate screens 139 Identification markings 179 Keyless Entry and Starting 97 Towing device 140 Parking brake 100 Load reduction mode 140 5-speed manual gearbox 100 Energy economy mode 140 6-speed manual gearbox 100 Changing a wiper blade 141 Audio and telematics . Automatic gearbox (EAT6) 101 Roof bars 142 CITROËN Connect Nav Electronic gearbox (ETG) 103 Bonnet 143 CITROËN Connect Radio Gear efficiency indicator 106 Engines 144 Hill start assist 107 Checking levels 144 Stop & Start 107 Checks 147 Recognition of speed limit signs and AdBlue® (BlueHDi engines) 149 recommendation 110 Advice on care and maintenance 152 Speed limiter 113 Cruise control 114 Alphabetical index . Collision Risk Alert and Active Safety Brake 117 Fatigue detection system 120 Lane Departure Warning System 122 In the event of a breakdown Blind spot monitoring 123 Running out of fuel (Diesel) 153 Parking sensors 125 Warning triangle (storage) 153 Reversing camera 127 Temporary puncture repair kit 153 Park Assist 127 Spare wheel 157 Tyre under-inflation detection 132 Changing a bulb 161 Changing a fuse 166 12 V battery 171 Towing 174 bit.ly/helpPSA

3 Overview

Instruments and controls 3 10 Courtesy lamp Instrument panel Interior rear view mirror Warning lamps Emergency or assistance call Indicator (servicing, engine oil level, gear efficiency) 4 Distance recorders Touch screen with CITROËN Connect Radio or CITROËN Connect Nav Steering mounted controls Set time-date Brightness of instruments and controls Heating, ventilation Manual air conditioning Automatic air conditioning

5 12 V accessory socket USB port

6 5/6-speed manual gearbox 1 Automatic gearbox (EAT6) Electronic gearbox (ETG6) Lighting control stalk Hill start assist Automatic illumination of headlamps Direction indicators 7 2 Parking brake Wiper control stalk 8 Trip computer 1 Glove box Front electric window controls 3 Jack auxiliary socket Speed limiter 2 9 Cruise control Bonnet release Dashboard fuses 4 Overview . Hazard warning lamps 4 Central switch panel Audio system adjustment controls

5 Horn Starting – Switching off the Front demisting/defrosting engine: START/STOP Side switch panel

Grip control Rear screen demisting/ defrosting Electric child lock

Locking/Unlocking from inside

Alarm activation lamp

Stopping the heating/ventilation and air conditioning Electric door mirrors adjustment

Activation of Park Assist

Manual headlamp beam height adjustment

5 Eco-driving

Adopt a smooth driving style Switch off the demisting and defrosting Eco-driving controls when not required, if they are not Maintain a safe distance between vehicles, automatically controlled. Eco-driving is a range of everyday practices use engine braking rather than the Switch off the heated seat as soon as that allow the motorist to optimise their fuel brake pedal, and press the accelerator possible. consumption and CO2 emissions. progressively. These practices contribute towards a reduction in fuel consumption and Switch off the lamps and foglamps when the

CO2 emissions and also help to reduce the ambient light level does not require their use. background traffic noise. Optimise the use of your If your vehicle has cruise control, make use of gearbox Avoid running the engine before moving off, the system at speeds above 25 mph (40 km/h) particularly in winter; your vehicle will warm up With a manual gearbox, move off gently when the traffic is flowing well. and change up without waiting. During much faster while driving. acceleration, change up early. As a passenger, if you avoid connecting your multimedia devices (film, music, video game, With an automatic or electronic gearbox, Control the use of your electrical etc.), you will contribute towards limiting the give preference to automatic mode and avoid equipment consumption of electrical energy, and so of pressing the accelerator pedal heavily or fuel. suddenly. Before moving off, if the passenger Disconnect your portable devices before compartment is too warm, ventilate it by leaving the vehicle. opening the windows and air vents before The gear efficiency indicator invites you to using the air conditioning. engage the most suitable gear: as soon as the Above 31 mph (50 km/h), close the windows indication is displayed in the instrument panel, and leave the air vents open. follow it straight away. Remember to make use of equipment that can For vehicles fitted with an electronic or help keep the temperature in the passenger automatic gearbox, this indicator appears only compartment down (sunroof and window in manual mode. blinds, etc.). Switch off the air conditioning, unless it has automatic regulation, as soon as the desired temperature is attained.

6 Eco-driving .

Limit the causes of excess Have your vehicle serviced regularly (engine consumption oil, oil filter, air filter, cabin filter, etc.) and observe the schedule of operations in the Spread loads throughout the vehicle; place manufacturer's service schedule. the heaviest items in the bottom of the boot, as close as possible to the rear seats. With a BlueHDi Diesel engine, if the SCR Limit the loads carried in the vehicle and system is faulty, your vehicle becomes reduce wind resistance (roof bars, roof rack, polluting. Visit a CITROËN dealer or a bicycle carrier, trailer, etc.). Preferably, use a qualified workshop as soon as possible to roof box. bring your vehicle's nitrogen oxides emissions Remove roof bars and roof racks after use. back in line with the regulations.

At the end of winter, remove snow tyres and When refuelling, do not continue after the 3rd refit your summer tyres. cut-off of the nozzle to avoid any overflow.

Observe the recommendations At the wheel of your new vehicle, it is only on maintenance after the first 1,900 miles (3,000 kilometres) that you will see the fuel consumption settle Check the tyre pressures regularly, when cold, down to a consistent average. referring to the label in the door aperture, driver's side. Carry out this check in particular: - before a long journey, - at each change of season, - after a long period out of use. Do not forget the spare wheel and the tyres on any trailer or caravan.

7 Instruments Instrument panel Warning and indicator Persistent warning lamp Display screens lamps When the engine is running or the vehicle is being driven, the illumination of a red or orange Displayed as symbols, visual indicators warning lamp indicates a fault that needs which inform the driver of the occurrence of a further investigation, using any associated malfunction (warning lamps) or of the operation message and the description of the warning of a system (operation or deactivation indicator lamp in the documentation. lamps). Certain lamps light up in two ways (fixed or flashing) and/or in several colours. Where a warning lamp remains lit 1. Cruise control or speed limiter settings. The references (1), (2) and (3) in the warning 2. Speed suggested by the speed limit lamp description indicate whether you should recognition Associated warnings contact a qualified professional in addition to Digital speedometer (mph or km/h). 3. The illumination of a lamp may be accompanied the immediate recommended actions. 4. Information related to the automatic or by an audible signal and/or a message electronic gearbox. displayed in a screen. 5. Gear efficiency indicator. Relating the type of illumination to the (1 ): You must stop as soon as it is safe to 6. Service indicator, then total distance operating status of the vehicle can determine do so and switch off the ignition. recorder (miles or km). whether the situation is normal or a fault has (2): Contact a CITROËN dealer or a qualified These functions are displayed occurred: refer to the description of each lamp workshop. for further information. successively on switching on the ignition. (3): Go to a CITROËN dealer or a qualified 7. Engine oil level indicator. workshop. 8. Fuel gauge. When the ignition is switched on Certain red or orange warning lamps come on for a few seconds when the ignition is switched on. These warning lamps should go off as soon as the engine is started.

8 Instruments List of warning and indicator lamps 1 Warning/indicator lamp State Cause Action/Observations

Red warning/indicator lamps STOP Fixed, associated with another Indicates a serious fault with the Carry out (1) and then (2). warning lamp, accompanied engine, braking system, power by the display of a message steering, automatic gearbox or a and an audible signal. major electrical fault.

Engine oil Fixed. There is a fault with the engine oil Carry out (1) and then (2). pressure lubrication circuit.

Brakes Fixed. The brake fluid level has dropped Carry out (1), then top up with brake fluid significantly. that complies with the manufacturer's recommendations. If the problem persists, carry out (2).

Brakes Fixed, associated with the The electronic brake force Carry out (1) and then (2). ABS warning lamp. distribution (EBFD) system has a + fault.

Parking brake Fixed. The parking brake is applied or not properly released.

Maximum Fixed. The temperature of the cooling Carry out (1), then wait until the engine coolant system is too high. has cooled down before topping up to the temperature required level if necessary. If the problem persists, carry out (2).

9 Instruments

Warning/indicator lamp State Cause Action/Observations

Battery charge Fixed. The battery charging circuit has a Clean and retighten the terminals. If the fault (dirty or loose terminals, slack warning lamp does not go off when the or cut alternator belt, etc.). engine is started, carry out (2).

Seat belt not Fixed or flashing, A seat belt has not been fastened or fastened/ accompanied by an audible has been unfastened. unfastened signal.

Orange warning/indicator lamps Anti-lock Fixed. The anti-lock braking system has a The vehicle retains conventional braking. braking system fault. Drive carefully at reduced speed, then carry (ABS) out (3).

(1 ): You must stop as soon as it is safe to do so and switch off the ignition. (2): Contact a CITROËN dealer or a qualified workshop. (3): Go to a CITROËN dealer or a qualified workshop.

10 Instruments Warning/indicator lamp State Cause Action/Observations 1 Service Temporarily on, accompanied One or more minor faults have Identify the cause of the fault using the by the display of a message. been detected, for which there is no message displayed in the instrument panel. specific warning lamp. You can deal with certain anomalies yourself, for example an open door or the start of saturation of the particle filter. For any other problems, such as a fault with the tyre under-inflation detection system, carry out (3).

Fixed, accompanied by the One or more major faults have Identify the cause of the anomaly using the display of a message. been detected, for which there is no message displayed in the instrument panel, specific warning lamp. then carry out (3).

Service warning lamp fixed The service is overdue. Only with BlueHDi Diesel versions. and service spanner flashing Your vehicle must be serviced as soon as + then fixed. possible.

11 Instruments

Warning/indicator lamp State Cause Action/Observations

AdBlue® Fixed, on switching on the The remaining driving range is Top up the AdBlue® as soon as possible, (1.6 BlueHDi ignition, accompanied by an between 1,500 and 375 miles (2,400 or carry out (3). + Euro 6.1) audible signal and a message and 600 km). indicating the remaining driving range.

Flashing, accompanied by an The remaining driving range is You must top up the AdBlue® to avoid a audible signal and a message between 375 and 0 miles (600 and breakdown, or carry out (3). indicating the remaining 0 km). driving range.

Flashing, accompanied by an The AdBlue® tank is empty: the To restart the engine, top up the AdBlue®, or audible signal and a message starting prevention system required carry out (2). indicating that starting is by legislation prevents starting of the It is essential to add at least 5 litres of prevented. engine. AdBlue® to its tank.

(1 ): You must stop as soon as it is safe to do so and switch off the ignition. (2): Contact a CITROËN dealer or a qualified workshop. (3): Go to a CITROËN dealer or a qualified workshop.

12 Instruments

Warning/indicator lamp State Cause Action/Observations ® Switched on for around thirty The remaining driving range is Top up the AdBlue®. 1 AdBlue (1.5 BlueHDi seconds when switching on between 1,500 and 500 miles (2,400 You can add up to 10 litres of AdBlue® to its the ignition, accompanied and 800 km). tank. Euro 6.2) by an audible signal and a message indicating the remaining driving range.

Fixed, on switching on the The remaining driving range is Top up the AdBlue® quickly, or carry out (3). ignition, accompanied by an between 500 and 60 miles (800 and You can add up to 10 litres of AdBlue® to its audible signal and a message 100 km). tank. indicating the remaining driving range.

Flashing, accompanied by an The driving range is less than 60 You must top up the AdBlue® to avoid a audible signal and a message miles (100 km). breakdown, or carry out (3). indicating the remaining You can add up to 10 litres of AdBlue® to its driving range. tank.

(1 ): You must stop as soon as it is safe to do so and switch off the ignition. (2): Contact a CITROËN dealer or a qualified workshop. (3): Go to a CITROËN dealer or a qualified workshop.

13 Instruments

Warning/indicator lamp State Cause Action/Observations

SCR emissions Fixed, on switching on the A fault with the SCR emissions This alert disappears once the exhaust control system ignition, associated with the control system has been detected. emissions return to normal levels. + (BlueHDi Diesel) Service and engine diagnostic warning lamps, accompanied by an audible signal and a + message.

Flashing, on switching on the Depending on the message Carry out (3) as soon as possible to avoid a ignition, associated with the displayed, you can continue driving breakdown. Service and engine diagnostic for up to 685 miles (1,100 km) before warning lamps, accompanied the engine starting prevention by an audible signal and system is triggered. a message indicating the remaining driving range.

Flashing, on switching on the An engine immobiliser prevents To start the engine, carry out (2). ignition, associated with the the engine from restarting (over Service and engine diagnostic the authorised driving limit after warning lamps, accompanied confirmation of a fault with the by an audible signal and a emissions control system). message.

Engine Flashing. The engine management system has There is a risk that the catalytic converter will be diagnostic a fault. destroyed. Carry out (2) without fail. system Fixed. The emissions control system has The warning lamp should go off when the a fault. engine is started. Carry out (3) quickly.

14 Instruments

Warning/indicator lamp State Cause Action/Observations Flashing. The system is operating. The vehicle brakes briefly so as to reduce the 1 Collision Risk Alert/Active speed of collision with the vehicle ahead. Safety Brake

Fixed, accompanied by a The system has a fault. Carry out (3). message and an audible signal.

Collision Risk Fixed, accompanied by a The system has been deactivated via Alert/Active message. the vehicle configuration menu. Safety Brake

Dynamic Flashing. The DSC/ASR adjustment is stability control activated if there is a loss of grip or (DSC/ASR) trajectory.

Fixed. The DSC/ASR system has a fault. Carry out (3).

Dynamic Fixed. The DSC/ASR is deactivated. Press the button to activate the DSC/ASR. stability control The DSC/ASR system is activated (DSC/ASR) automatically when the vehicle is started. If the system is deactivated, it is reactivated automatically once a speed of around 31 mph (50 km/h) is reached.

(1 ): You must stop as soon as it is safe to do so and switch off the ignition. (2): Contact a CITROËN dealer or a qualified workshop. (3): Go to a CITROËN dealer or a qualified workshop. 15 Instruments

Warning/indicator lamp State Cause Action/Observations

Under-inflation Fixed, accompanied by an The pressure in one or more tyres is Check the pressure of the tyres as soon as audible signal and a message. too low. possible. Reinitialise the detection system after adjusting the pressure.

Under-inflation Flashing then fixed, The system is faulty: tyre pressures As soon as possible, check the pressure of accompanied by the Service are no longer monitored. the tyres and carry out (3). + warning lamp.

Diesel engine Fixed. The ignition is on. Wait until the lamp goes off before starting. pre-heating The period of illumination If the engine does not start, switch the ignition off and then on, wait until the lamp depends on the climatic goes off again, then start the engine. conditions.

Front passenger Fixed. The front passenger airbag is In this case, do NOT install a "rearward airbag (ON) activated. facing" child seat on the front passenger The control is in the "ON" position. seat – Risk of serious injury!

Front passenger Fixed. The front passenger airbag is You can install a "rearward facing" child airbag (OFF) deactivated. seat, unless there is a fault with the airbags The control is in the "OFF" position. (Airbags warning lamp on).

Airbags Fixed. One of the airbags or seat belt Carry out (3). pyrotechnic pretensioners is faulty.

16 Instruments

Warning/indicator lamp State Cause Action/Observations Fixed, accompanied by an When it first comes on, there Refuel without delay to avoid running out of 1 Low fuel level audible signal and a message. remains approximately 5 litres of fuel. Until sufficient fuel has fuel in the tank (reserve). Never drive until completely empty, this been added, this warning could damage the emissions and injection lamp reappears every time systems. the ignition is switched on, accompanied by an audible warning and a message. The audible warning and the message are repeated with increasing frequency as the fuel level drops towards zero.

Lane departure Flashing, accompanied by an A lane is being crossed, right side (or Turn the steering wheel in the opposite warning system audible signal. left side). direction to return to the correct trajectory.

Lane departure Fixed, accompanied by the The lane departure warning system Carry out (3). warning system Service warning lamp. is faulty.

Rear foglamp Fixed. The rear foglamp is lit.

17 Instruments

Warning/indicator lamp State Cause Action/Observations

Green warning/indicator lamps Stop & Start Fixed. When the vehicle stops, the Stop & Start puts the engine into STOP mode.

Flashing temporarily. STOP mode is momentarily unavailable or START mode is automatically triggered.

Left-hand Flashing with audible signal. The lamps are lit direction indication

Right-hand Flashing with audible signal. The lamps are lit. direction indicator Sidelamps Fixed. The lamps are lit.

Dipped beam Fixed. The lamps are lit. headlamps

Front foglamps Fixed. The front foglamps are lit.

Blue warning lamps Main beam Fixed. The main beams are lit. headlamps

18 Instruments Warning/indicator lamp State Cause Action/Observations 1 Black/white warning/indicator lamps Foot on brake Fixed. Omission or insufficient pressure on With an electronic gearbox, selector in the brake pedal. position N, to start the engine. With an automatic gearbox, engine running and before releasing the parking brake, to move out of position P.

Flashing. With an electronic gearbox, the Use the brake pedal and/or the parking clutch will overheat if you hold brake. the vehicle on a slope using the accelerator for too long.

Automatic Fixed. Automatic front wiping is activated. wiping

19 Instruments

Indicators The distance indicated (in kilometres Resetting the service indicator or miles) is calculated according to the Service indicator mileage covered and the time elapsed The service indicator is displayed on the since the last service. instrument panel. Depending on the vehicle The alert may be triggered close to a due version: date. - the distance recorder display line indicates the distance remaining before the next service is due, or the distance travelled since it was due preceded by the sign "-". - an alert message indicates the distance remaining as well as the period before the After each service, the service indicator must next service is due or since it was overdue. be reset to zero. If you have carried out the service on your vehicle yourself: Warning/indicator State Cause Action/ F switch off the ignition, lamp Observations F press and hold the button on the end of the lighting control stalk, Service Lights up temporarily Between 1,900 miles F switch on the ignition; the distance recorder spanner when the ignition is (3,000 km) and 620 miles (1,000 km) display begins a countdown, switched on. remain before the F when the display indicates "=0", release the next service is due. button; the spanner disappears.

Fixed, when the The service is due in Have your vehicle ignition is switched less than 620 miles serviced very soon. on. (1,000 km). Following this operation, if you wish to disconnect the battery, lock the vehicle Service Flashing then fixed, The service is Have your vehicle and wait at least five minutes for the zero spanner when the ignition is overdue. serviced as soon as reset to be registered. flashing switched on. possible. + (For BlueHDi Diesel versions, associated with the Service warning lamp).

20 Instruments

Retrieving the service Oil level correct This is indicated by a message in the information instrument panel. Contact a CITROËN dealer or a qualified 1 You can access the service information at any workshop. time in the touch screen. In the event of a fault with the electric indicator, F In the Driving/Vehicle menu, the oil level is no longer monitored. select the "Driving functions" If the system is faulty, you must check the tab, then "Diagnostics". Oil level incorrect engine oil level using the manual dipstick located under the bonnet. The servicing information is displayed in the screen.

For more information on Checking levels, Engine oil level indicator This is indicated by the display of a message refer to the corresponding section. in the instrument panel screen, accompanied (depending on version) by the Service warning lamp and an audible On versions fitted with an electric oil level signal. indicator, the state of the engine oil level is If the low oil level is confirmed by a check using AdBlue® range indicators displayed in the instrument panel for a few the dipstick, the level must be topped up to seconds, after the servicing information. avoid damage to the engine. These range indicators are present only on BlueHDi Diesel versions. ® For more information on Checking levels, Once the AdBlue tank is on reserve or after detection of a fault with the SCR emissions The level read will only be correct if the refer to the corresponding section. control system, when the ignition is switched vehicle is on level ground and the engine on, an indicator displays an estimate of the has been off for more than 30 minutes. distance that can be covered, the range, before engine starting is prevented. Oil level indicator fault

21 Instruments

In the event of the risk of non- Remaining range between 1,500 and 500 miles When driving, the message comes up every starting related to a lack of (2,400 and 800 km) (1.5 BlueHDi Euro 6.2) 185 miles (300 km) until the tank is topped up. AdBlue® The reserve level has been reached; it is recommended that you top up as soon as The engine starting prevention system possible. required by regulations is activated When switching on the ignition, this warning automatically once the AdBlue® tank is lamp comes on for about thirty seconds, empty. accompanied by the display of a message ("NO Remaining range between 500 and 60 miles START IN and a distance" or "Top up AdBlue: (800 and 100 km) (1.5 BlueHDi Euro 6.2) Starting impossible in x miles/km") indicating Range greater than 1,500 miles (2,400 km) the remaining range expressed in miles or When switching on the ignition, there is no kilometres. automatic display of range in the instrument The reserve level has been reached; it is When switching on the ignition, this warning panel. recommended that you top up as soon as lamp comes on, accompanied by an audible possible. Range less than 1,500 miles (2,400 km) signal (1 beep) and the display of a message You can check the remaining range for your ("NO START IN and a distance" or "Top up vehicle at any time on the touch screen. These messages are accompanied by the AdBlue: Starting impossible in x miles/km") recommendation not to top up with more than indicating the remaining range expressed in 10 litres of AdBlue. miles or kilometres. F You can access this information When driving, the audible signal and the via the Driving/Vehicle touch Remaining range between 1,500 and 375 miles message display are triggered every 60 miles screen menu, by selecting the (2,400 and 600 km) (1.6 BlueHDi Euro 6.1) (100 km) until the level is topped up. "Driving functions" tab, then It is essential to top up as soon as possible and "Diagnostics". before the tank is completely empty, otherwise it will not be possible to restart the engine. When switching on the ignition, this warning lamp comes on, accompanied by an audible signal and the display of a message ("NO START IN and a distance" or "Top up AdBlue: Starting impossible in x miles/km") indicating the remaining range expressed in miles or kilometres.

22 Instruments

Remaining range less than 375 miles When driving, the audible signal and the In the event of a fault with the (600 km) (1.6 BlueHDi Euro 6.1) message display are triggered every 6 miles SCR emissions control system (10 km) until the AdBlue tank is topped up. 1 It is essential to top up as soon as possible and before the tank is completely empty, otherwise A system that prevents engine starting is it will not be possible to restart the engine. When switching on the ignition, this warning activated automatically from 685 miles lamp flashes, accompanied by the permanent (1,100 km) after confirmation of a fault with lighting of the Service warning lamp, an audible the SCR emissions control system. signal and the display of a message ("NO Breakdown due to a lack of AdBlue® Have the system checked by a CITROËN START IN and a distance" or "Top up AdBlue: dealer or a qualified workshop as soon as Starting impossible in x miles/km") indicating possible. the remaining range expressed in miles or kilometres. When driving, this message is displayed every When switching on the ignition, this warning thirty seconds until the AdBlue level has been lamp flashes and the Service warning lamp comes on, accompanied by an audible signal In the event of the detection of a fault topped up. and the temporary display of "NO START IN It is essential to top up as soon as possible and 0 km or miles" or "Top up AdBlue: Starting before the tank is completely empty, otherwise impossible". it will not be possible to restart the engine. The AdBlue® tank is empty: the starting These warning lamps come on, accompanied prevention system required by legislation by an audible signal and the display of the prevents starting of the engine. "Emissions fault" message. Remaining range less than 60 miles The alert is triggered while driving as soon (100 km) (1.5 BlueHDi Euro 6.2) To be able to restart the engine, it is as the fault is detected for the first time, then ® essential to add at least 5 litres of AdBlue when switching on the ignition for subsequent to its tank. journeys, while the fault persists.

When switching on the ignition, this warning ® lamp flashes, accompanied by an audible For more information on AdBlue If it is a temporary fault, the alert signal (1 beep) and the display of a message (BlueHDi engines), and, in particular, disappears during the next journey, ("NO START IN and a distance" or "Top up on topping up, refer to the corresponding after self-diagnostic checks of the SCR AdBlue: Starting impossible in x miles/km") section. emissions control system. indicating the remaining range expressed in miles or kilometres. 23 Instruments

During the permitted driving phase You have exceeded the authorised driving As a safety measure, the driver must (between 685 and 0 miles (1,100 and 0 km)) limit: the starting prevention system only carry out operations that require inhibits engine starting. sustained attention with the vehicle stationary. Some functions are not accessible when To be able to restart the engine, you must call a If a fault with the SCR system is confirmed driving. (after 31 miles (50 km) covered with the CITROËN dealer or a qualified workshop. permanent display of the message signalling a fault), these warning lamps come on and the AdBlue warning lamp flashes, associated with Recommendations an audible signal and the display of a message This screen is of the capacitive type. (e.g. "NO START IN 200 miles" or "Emissions Touch screen Use is possible in all temperatures. fault: Starting prevented in 200 miles") Do not use pointed objects on the touch The touch screen gives access to: indicating the remaining range expressed in screen. - the heating/air conditioning controls, miles or kilometres. Do not touch the touch screen with wet hands. - menus for adjusting settings for vehicle Use a soft clean cloth to clean the touch While driving, the message is displayed every functions and systems, screen. thirty seconds while the fault with the SCR - audio system and telephone controls and emissions control system persists. the display of associated information, The alert is repeated when switching on the and, depending on equipment, allows: ignition. - the display of alert messages and the visual You should go to a CITROËN dealer or a parking sensors information, Touch screen qualified workshop as soon as possible. - the permanent display of the time and the Use the buttons on each side of the touch Otherwise you will not be able to restart the exterior temperature (a blue warning lamp screen to access the menus, then use the vehicle. appears when there is a risk of ice), buttons that appear on the touch screen. - access to the internet services and Starting prevented Certain functions may be displayed over 1 or navigation system controls and the display 2 pages. of associated information. To deactivate/activate a function, press OFF/ ON. Each time the ignition is switched on, these warning To modify a setting (lighting duration, etc.) or lamps come on and the AdBlue warning lamp access additional information, press the symbol flashes, accompanied by an audible signal and the for the function. display of the message "NO START IN 0 miles" or "Emissions fault: Starting prevented". 24 Instruments

For more information on Heating, Manual After a few moments with no action on Upper bar air conditioning and Automatic air the secondary page, the primary page is Certain information is always present in the conditioning, refer to the corresponding 1 displayed automatically. upper bar of the touch screen: sections. - Reminder of the air conditioning information, and access to a simplified Use this button to confirm. Telephone. See the "Audio and telematics" section. menu (temperature and air flow adjustment only). Use this button to return to the Applications. - Reminder of information from the Radio Allows the display of the connected previous page. Media and Telephone menus and services available. navigation instructions*. See the "Audio and telematics" section. - Notifications zone (texts and email)*. Menus Vehicle or Driving.* Allows the activation, deactivation - Access to Configuration. and adjustment of settings for certain functions.

The functions accessible from this menu are * Depending on equipment arranged under two tabs: "Vehicle settings" and "Driving functions". Volume control/mute. See the "Audio and telematics" section.

Radio Media. See the "Audio and telematics" section. Press with three fingers on the touch Mirror Screen or Connected screen to access the menu carousel. navigation.* See the "Audio and telematics" section Air conditioning. Allows control of the settings for temperature, air flow, etc.

* Depending on equipment. 25 Instruments

"Vehicle" menu/"Driving" For more information on one of these "Driving functions" tab menu functions, refer to the corresponding section. Function Comments "Vehicle settings" tab Park Assist Activation of the The functions are grouped into 4 families. function.

Families Functions Stop & Start Activation/deactivation of the function. - "Rear wiper in reverse": activation/deactivation of the rear wiper with reverse gear. - "Automatic folding of mirrors": activation/deactivation of the Parking sensors Activation/deactivation "Parking" automatic door mirror folding/unfolding when locking/unlocking. of the function.

- "Guide-me-home lighting": activation/deactivation of automatic guide- Traction control Activation/deactivation me-home lighting. of the function. - "Welcome lighting": activation/deactivation of exterior welcome "Headlamps" lighting. Blind spot Activation/deactivation - "Daytime running lamps" (depending on country of sale). sensors of the function. - "Directional headlamps" activation/deactivation of the cornering lighting. Reinitialisation of - "Unlock: Boot only": activation/deactivation of selective unlocking of Under-inflation the tailgate. initialisation the under-inflation detection system. "Comfort" Diagnostics List of current alerts. - "Fatigue Detection System": activation/deactivation of the driver fatigue detection system. - "Recommended speed display" activation/deactivation of speed limit "Safety" display. - "Collision risk alert and automatic braking": activation/deactivation of the collision risk alert and automatic emergency braking. - "Blind spot sensors": activation/deactivation of blind spot sensors.

26 Instruments Configuration CITROËN Connect Radio Trip computer The functions available via the upper Button Comments Information displayed about the current journey 1 bar are detailed in the table below. (range, fuel consumption, average speed, etc.). Some settings are accessible on a Switch off the screen. secondary page. The information is accessible via the touch Brightness adjustment. screen. CITROËN Connect Nav

Button Comments Display of information in Choice and settings for three the touch screen Theme. user profiles. F In the "Applications" menu, Choice of units: select the "Vehicle application" - temperature (°Celsius or Audio settings. tab, then "Trip computer". °Fahrenheit) - distances and fuel consumption (l/100 km, mpg The trip computer information is displayed on Turn off screen. or km/l). the page. Theme. F Press one of the buttons to display the System administration. desired tab.

Languages. For a temporary display in a specific Languages. window, press the end of the wiper control Adjustment of the display stalk for access to the information and Setting the date and time. parameters (text scrolling, scroll through the different tabs. animations, etc.) and brightness. Adjustment of the display - The current information tab with: parameters (text scrolling, Setting the date and time. • the remaining range, animations, etc.) and • the current fuel consumption, brightness. • the Stop & Start time counter. Choice and settings for three user profiles. 27 Instruments

- The trip "1" tab with: This value may fluctuate if a change Average speed • the average speed, of driving style or terrain results in a • the average fuel consumption, (mph or km/h) significant change in the current fuel • the distance travelled, for the first trip. consumption. Calculated since the last trip computer reset. - The trip "2" tab with: • the average speed, Dashes are displayed when the range falls below 19 miles (30 km). • the average fuel consumption, Distance travelled • the distance travelled, for the second trip. After filling with at least 5 litres of fuel, the range is recalculated and is displayed if it (miles or km) exceeds 60 miles (100 km). Calculated since the last trip Resetting the trip recorder computer reset. If dashes instead of figures continue to F When the desired trip is displayed, press be displayed when driving, contact a the "Reset" button or the end of the wiper CITROËN dealer or a qualified workshop. Stop & Start time counter control stalk until zeros appear. (minutes/seconds or hours/minutes) Trips "1" and "2" are independent. For example, trip "1" can be used for daily Current fuel consumption figures, and trip "2" for monthly figures. (mpg or l/100 km or km/l) A cumulative time counter for periods in STOP Calculated during the last few mode during a journey. seconds. It resets to zero every time the ignition is switched on. A few definitions… This function is only displayed at speeds Range above 19 mph (30 km/h). Distance recorders (miles or km) The total and trip distances are displayed for The distance which can still be Average fuel consumption thirty seconds when the ignition is switched off, travelled with the fuel remaining in when the driver's door is opened and when the the tank (related to the average fuel (mpg or l/100 km or km/l) vehicle is locked or unlocked. consumption over the last few miles Calculated since the last trip (kilometres) travelled). computer reset.

28 Instruments

F In the "Applications" When travelling abroad, you may have to With CITROËN Connect menu, select the "Vehicle change the units of distance: the display Application" tab, then "Trip Nav 1 of road speed must be in the official units Computer". Setting of the time and date is only available if (miles or km) for the country. synchronisation with the GPS is deactivated. The change of units is done via the screen F Select the trip "1" or trip "2" tab. configuration menu, with the vehicle F stationary. Select the Settings menu. F To reset the trip recorder to zero, press the "Reset" button or the end of the wiper control stalk until zeros appear. F Press the "OPTIONS" button to go to the Total distance recorder secondary page. F Select "Setting the time-date". Setting the date and time

With CITROËN Connect F Select the "Date" or "Time" tab. Radio F Set the date and/or time using the numeric keypad. F Select the Settings menu. F Confirm with " ". F Then "Configuration". OK It measures the total distance travelled by the vehicle since its first registration. F Select "System configuration". Additional adjustments You can choose: F Select "Date and time". - To change the display format of the date Trip recorder and time (12h/24h). It measures the distance travelled since it was - To activate or deactivate the summer/winter reset to zero by the driver. F Select "Date" or "Time". time management function. This function can be accessed by the touch F Choose the display formats. - To activate or deactivate the screen's trip computer. F Change the date and/or time using the synchronisation with the GPS (UTC). numeric keypad. F Confirm with "OK".

29 Instruments Lighting dimmer Permits manual adjustment of the brightness of the instruments and controls to suit the ambient light level.

Only works when the vehicle lamps are on (except daytime running lamps) and in night mode.

This function can be accessed by the touch screen.

F Select the "Settings" menu.

F Then press the "Brightness" button.

F Select the "Configuration" menu.

F Then press the "Screen configuration" button and select the Brightness" tab.

F Adjust the brightness by pressing the arrows or moving the cursor.

The brightness can be adjusted differently for day mode (lighting control stalk in position "0") and night mode (lighting control stalk in any other position).

30 Access

Emergency procedures allow the vehicle to Ejecting the key Remote control and key be locked or unlocked in the event of a failure Remote control function of the remote control, the central locking, the battery, etc. For more information on the Emergency procedures, refer to the corresponding section. 2

Integral key

Version without Keyless Entry and Starting F To eject the key from the housing, press the button. F The remote control can be used for the Press the button before folding the key back following remote functions, depending on to avoid damaging the mechanism. version: - unlocking/locking/deadlocking the vehicle, - unlocking and partial opening of the boot, - opening the fuel tank cap (without K eyless Entry and Starting), The key built into the remote control can be - locking/unlocking the fuel filler flap (with used for the following functions, depending on Keyless Entry and Starting), version: - locating the vehicle, - unlocking/locking/deadlocking the vehicle, - vehicle immobiliser. - turning the manual child lock on or off, The remote control includes a conventional key - activating/deactivating the front passenger that allows the central locking or unlocking of airbag, the vehicle using the door lock, and starting - emergency door locking, Version with K eyless Entry and Starting and switching off the engine. - switching on the ignition and starting/ F To eject the key from the housing, pull and Under normal operating conditions, it is switching off the engine. hold the button. preferable to use the remote control. F Pull and hold the button before returning the key.

31 Access Unlocking the vehicle If selective unlocking of the boot is If one of the doors or the boot is still open, deactivated, pressing this button also unlocks the central locking does not work; the vehicle With the remote control the doors. Activate or deactivate selective locks, then immediately unlocks, identifiable by unlocking of the boot via the touch screen: the locks making a rebounding sound. F Press this button to unlock the vehicle. F In the Driving/Vehicle menu, When the vehicle is locked, if it is select the "Vehicle settings" Rapid flashing of the direction indicators for a unlocked without opening a door or the tab, then "Comfort" and activate/ few seconds signals: boot, it will automatically lock itself again deactivate "Unlock boot only". - the unlocking of the vehicle for versions after thirty seconds. without an alarm, - the deactivation of the alarm for other versions. Remember to close and lock the boot The folding and automatic unfolding of the Depending on version, the door mirrors unfold, again by pressing the closed padlock. door mirrors can be deactivated by the and the welcome lighting comes on. vehicle's configuration menu. With the key F Turn the key in the driver's door lock Locking the vehicle With the key towards the front of the vehicle to unlock With the remote control it. F Turn the key in the driver's door lock F Press this button to lock the towards the rear of the vehicle to lock it. vehicle. Selective unlocking of the boot F Press this button to unlock and The continuous illumination of the direction Check that the doors and boot are fully release the boot. The doors indicators for a few seconds signals: closed. remain locked. - the locking of the vehicle for versions without an alarm, - the activation of the alarm for other By default, selective unlocking of the boot is versions. Locating your vehicle activated. Depending on version, the door mirrors fold. This function allows you to identify your vehicle from a distance, particularly in poor light. Your vehicle must be locked.

32 Access

F Press this button. The courtesy Depending on version, the door mirrors fold. This system allows the unlocking, locking lamps will come on and the and starting of the vehicle, while carrying the direction indicators will flash for a electronic key on your person in the recognition few seconds. If your vehicle is fitted with an alarm, zone "A" around the vehicle. activation is confirmed by fixed illumination of the direction indicators for a The electronic key also acts as a 2 few seconds. remote control. For more information Deadlocking on the Remote control, refer to the corresponding section. With the key F Turn the key to the rear in the driver's door Deadlocking deactivates the exterior and lock to lock the vehicle completely. Unlocking the vehicle interior door controls as well as the central F Turn the key to the rear again within five locking button on the dashboard. seconds to deadlock the vehicle. You must therefore never leave anyone inside the vehicle when it is deadlocked.

Keyless Entry and With the remote control Starting F Press this button once to lock the F With the electronic key on your person vehicle completely. in the recognition zone, pass your hand F Within five seconds, press the behind the door handle of one of the front button again to deadlock the doors or press the tailgate opening control. vehicle. The unlocking is confirmed by flashing of the direction indicators for a few seconds. The door For versions without an alarm, deadlocking mirrors unfold at the same time (depending on is confirmed by illumination of the direction version). indicators for few seconds on the second press of the locking button.

33 Access

Accumulations (water, dust, grime, salt, If one of the doors or the boot is still open In order to preserve the battery in the etc.) on the inner surface of the door or if the electronic key for the K eyless electronic key and the vehicle's battery, handle may affect detection. Entry and Starting system has been left the "hands-free" functions are put into If cleaning the inner surface of the door inside the vehicle, the central locking does long-term standby after 21 days without handle using a cloth does not restore not take place. use. To restore these functions, press detection, contact a CITROËN dealer or a If the vehicle is unlocked inadvertently one of the remote control buttons or start qualified workshop. and there is then no action on the doors the engine with the electronic key in the A sudden splash of water (stream of water, or boot, the vehicle will automatically lock reader. high pressure jet washer, etc.) may be itself again after about thirty seconds. For more information on Starting/ identified by the system as the desire to The folding and automatic unfolding of the Switching off the engine with K eyless open the vehicle. door mirrors can be deactivated by the Entry and Starting, refer to the vehicle's configuration menu. corresponding section.

For safety and theft protection reasons, do not leave your electronic key in the vehicle, even when you are close to it. As a safety measure (children on board), Locking the vehicle It is recommended that you keep it with never leave the vehicle without taking the Normal locking you. electronic key for the K eyless Entry and Starting system with you, even for a short period. Be aware of the risk of theft when the electronic key for the K eyless Entry and Starting system is in one of the defined F With the electronic key in the recognition zones with the vehicle unlocked. zone, press with your finger or thumb on one of the front door handles (at the markings) to lock the vehicle. It is not possible to lock the vehicle if one of the keys is left inside it.

34 Access

Deadlocking F Press this button to operate the central locking of the vehicle (doors and boot) from Transporting long or voluminous inside the vehicle. The button indicator lamp objects comes on. Press the central locking control to F Pressing the button again unlocks the drive with the boot open and the doors Deadlocking deactivates the exterior and vehicle completely. The button indicator unlocked. interior door controls as well as the central lamp goes off. 2 locking button on the dashboard. The central locking does not work if one of You must therefore never leave anyone the doors is open. inside the vehicle when it is deadlocked. Recommendations

When purchasing a second-hand If the vehicle is deadlocked or locked from vehicle the outside, the button is not active. If the Have the key codes memorised by a vehicle is not deadlocked, use the remote F With the electronic key in the recognition CITROËN dealer, to ensure that the keys control to unlock the vehicle or pull an zone, press one of the front door handles in your possession are the only ones interior door handle to open a door. once with your finger or thumb (at the which can start the vehicle. markings) to lock the vehicle. F Within five seconds, press the door handle again to deadlock the vehicle. Automatic (anti-intrusion security) The doors and boot can lock automatically Central locking while driving (speed above 6 mph (10 km/h)). Manual To activate or deactivate this function (activated by default):

F Press the button until an audible signal is heard and a message appears in the screen.

35 Access

Remote control Electrical interference Emergency procedures The high frequency remote control is a The Keyless Entry and Starting electronic sensitive system; do not handle it in your key may not operate if close to certain Lost keys, remote control, pocket as it may unlock the vehicle without electronic devices: telephone, laptop electronic key you being aware of it. computer, strong magnetic fields, etc. Visit a CITROËN dealer with the vehicle's Do not repeatedly press the buttons of your registration certificate, your personal remote control out of range and out of sight Anti-theft protection identification documents and if possible, the of your vehicle. The remote control may stop Do not make any modifications to the label bearing the key code. working and need to be reinitialised. electronic vehicle immobiliser system as this The CITROËN dealer will be able to retrieve the The remote control does not operate when could cause malfunctions. key code and the transponder code required to the key is in the ignition, even when the For vehicles with an ignition switch, do order a new key. ignition is switched off. not forget to remove the key and turn the steering to engage the steering lock. Locking the vehicle Driving with the doors locked may make Complete unlocking/locking access to the passenger compartment by of the vehicle with the key the emergency services more difficult in an Use these procedures in the following cases: emergency. - remote control cell battery flat, As a safety precaution (with children on - remote control fault, board), remove the key from the ignition or - vehicle in an area subject to strong take the electronic key when you leave the electromagnetic interference. vehicle, even for a short time. In the first case, you can also replace the remote control cell battery. In the second case, you can also reinitialise the remote control. Refer to the corresponding sections.

36 Access

F R emove the black cap on the edge of the In the event of a malfunction with the door, using the key. central locking system, the battery must F Without forcing, insert the key into the be disconnected to lock the boot and thus aperture, then, without turning it, move the ensure that the vehicle is locked fully. latch sideways towards the inside of the door. 2 F Remove the key and refit the black cap. F Insert the key in the door lock. Driver's door F Close the doors and check from the outside F Turn the key towards the front of the vehicle F Turn the key towards the rear of the vehicle that the vehicle is locked. to unlock it, or towards the rear to lock it. to lock it, or towards the front to unlock it. F Turn the key towards the rear again within 5 seconds to deadlock the vehicle. For versions without an alarm, the lighting Changing the battery Passenger doors of the direction indicators for a few seconds If the battery is flat, you are informed Unlocking confirms that the procedure has been by illumination of this warning lamp, F Pull the interior door opening handle. completed correctly. an audible signal and a message in the screen. Locking F Open the door. If your vehicle is fitted with an alarm, this F On the rear doors, check that the child lock Version without Keyless Entry and Starting function will not be activated when locking is not activated. Refer to the corresponding Battery type: CR1620/3 volts. with the key. section. If the alarm is activated, the siren sounds on opening the door; switch on the ignition to stop it.

Central locking not functioning Use these procedures in the following cases: - central locking fault, - battery disconnected or discharged.

37 Access Version with K eyless Entry and Starting Reinitialising the remote Version with K eyless Entry and Battery type: CR2032/3 volts. control Starting Following replacement of the battery or in the event of a remote control fault, it may be necessary to reinitialise the remote control.

Version without K eyless Entry and Starting

F Place the mechanical key (integral with the F Unclip the cover by inserting a small remote control) in the lock to unlock your screwdriver in the slot and raise the cover. vehicle. F Remove the flat battery from its housing. F Place the electronic key against the back-up F Insert the new battery with the correct reader under the parking brake lever and polarity and clip the cover onto the housing. hold it there until the ignition is switched on. F Reinitialise the remote control. F With a manual gearbox, place the gear For more information on Reinitialising the lever in neutral then fully depress the clutch remote control, refer to the corresponding F Switch off the ignition. pedal. F section. Turn the key to position 2 (Ignition on). F With an automatic gearbox, from mode P, F Press the closed padlock immediately for a fully depress the brake pedal. few seconds. F With an electronic gearbox, from mode N, F Switch off the ignition and remove the key fully depress the brake pedal. Do not throw remote control batteries from the ignition switch. away as they contain metals which are The remote control is fully operational again. harmful to the environment. Take them to an approved collection point.

38 Access F Switch on the ignition by pressing the From inside Boot "START/STOP" button. The electronic key is now fully operational Opening again. If the fault persists after reinitialisation, contact a CITROËN dealer or a qualified workshop 2 without delay. F Pull the interior opening control of a door; this unlocks the whole vehicle. Doors

Opening The interior opening control on a rear door does not work if the child lock is on. From outside For more information on the Child Lock, refer to the corresponding section.

F With the vehicle unlocked or with the Closing electronic key of the Keyless Entry and Starting system in the recognition zone, When a door is not closed correctly: press the central tailgate control. - with the engine running or the vehicle F Raise the tailgate. moving (speed below 6 mph (10 km/h)), a F After unlocking the vehicle using the remote message appears in the screen. control or the key, pull the door handle. Unlocking the boot using the remote - with the vehicle moving (speed above control opens the tailgate slightly. 6 mph (10 km/h)), a message appears in the screen, accompanied by an audible signal. For more information on the Remote control or on Keyless Entry and Starting, refer to the corresponding section.

39 Access

- Exterior perimeter: In case of malfunction or difficulties To unlock the boot The system checks whether the vehicle is moving the tailgate when opening or opened. The alarm is triggered if anyone closing it, have it checked as soon as tries to open a door, the boot or the bonnet. possible by a CITROËN dealer or a qualified workshop to ensure that this inconvenience does not get worse, making the tailgate fall and causing serious Self-protection function: the system injuries. checks for the putting out of service of its own components. The alarm is triggered if the battery, button or siren wiring is Closing F Fold the rear seats to gain access to the disconnected or damaged. lock from inside the boot. F Insert a small screwdriver into hole A of the lock. F Move the latch to the left. For all work on the alarm system, contact a CITROËN dealer or a qualified To re-lock the boot workshop. If the problem persists, the boot will remain locked after opening and closing. F Lower the tailgate using the interior grab Locking the vehicle with handle. alarm system If the tailgate is not fully closed: Alarm - with the engine running or the vehicle Activation moving (speed below 6 mph (10 km/h)), a F Switch off the ignition and get out message appears in the screen. of the vehicle. - with the vehicle moving (speed above F Lock or deadlock the vehicle 6 mph (10 km/h)), a message appears in the using the remote control or screen, accompanied by an audible signal. Keyless Entry and Starting system. Emergency control When the monitoring system is active, the To unlock the boot manually in the event of a System which protects and provides a deterrent button indicator lamp flashes once per second battery or central locking failure. against theft and break-ins. It provides the and the direction indicators come on for about following type of monitoring: two seconds. 40 Access The exterior perimeter monitoring is activated Triggering of the alarm Malfunction after five seconds. This is indicated by sounding of the siren When the ignition is switched on, and for If a door, boot, etc. is not properly closed, and flashing of the direction indicators for 10 seconds afterwards, the flashing of the the vehicle is not locked but the exterior 30 seconds. locking button indicator lamp indicates a perimeter monitoring will be activated after The monitoring functions remain active until system fault. 2 45 seconds. the alarm has been triggered eleven times Have the system checked by a CITROËN consecutively. dealer or a qualified workshop. When the vehicle is unlocked using the remote Deactivation control or the Keyless Entry and Starting system, rapid flashing of the locking button F Front electric window Press the unlocking button on indicator lamp informs you that the alarm the remote control. was triggered during your absence. When controls the ignition is switched on, this flashing stops or immediately. F Unlock the vehicle with the Keyless Entry and Starting system. Locking the vehicle without The monitoring system is activating the alarm 1. Front left. deactivated: the indicator lamp in F Lock or deadlock the vehicle using the key the button goes off and the direction (integral to the remote control) in the driver's 2. Front right. indicators flash for about 2 seconds. door lock. Failure of the remote Manual operation When the vehicle automatically locks itself control To open or close the window, press or pull the again (as happens if a door or boot is not To deactivate the monitoring functions: switch gently, without exceeding the resistance opened within 30 seconds of unlocking), F unlock the vehicle using the key (integral to point. The window stops as soon as the switch the monitoring system is automatically the remote control) in the driver's door lock, is released. reactivated. F Open the door; this sets off the alarm. F Upon switching on the ignition, the alarm stops. The button indicator lamp goes off.

41 Access Automatic operation Reinitialisation of the Rear door windows electric windows Each window can be hinged open to provide To open or close the window, press or pull the Following reconnection of the battery, the anti- ventilation at the rear seats. switch fully, beyond the resistance point: the pinch function must be reinitialised. window opens or closes completely when the The anti-pinch function is not active during Opening switch is released. Pressing the switch again these operations. stops the movement of the window. For each window: - bring the window down completely, then bring it back up. It will go up by a few centimetres each time. Perform the The electric window switches remain operation again until the window is fully operational for approximately 45 seconds closed, after switching off the ignition. - continue to pull the switch for at least one Once this time has elapsed, the electric second after reaching the window closed windows will not operate. To reactivate position. them, switch the ignition on again.

F In the event of contact (pinching) during Tilt the lever outwards. F Anti-pinch operation of the windows, you must Push it fully to secure the window in the open position. When the window rises and meets an obstacle, reverse the movement of the window. To it stops and immediately partially lowers again. do this, press the switch concerned. Closing To reinitialise normal operation, press the When the driver operates the passenger switch until the window opens completely, then electric window switch, it is important F Pull the lever to release the window. pull the switch immediately until the window to ensure that nothing can prevent the F Tilt the lever fully inwards to secure the closes fully. Continue to hold the switch for window from closing properly. window in the closed position. approximately one more second. Be particularly aware of children when The anti-pinch safety function is not active operating the windows. whilst the function is being activated.

42 Ease of use and comfort

Front seats Once these adjustments have been made, Backrest angle check the instrument panel can be viewed As a safety measure, adjustments to the correctly from your driving position. driver's seat must only be done when stationary. Settings Correct driving position Longitudinal Before taking to the road and to make the most 3 of the ergonomic layout of the instruments and controls, carry out these adjustments in the following order: F Turn the knob B to adjust the backrest. - height of the head restraint, - backrest angle, - seat cushion height, Height - longitudinal position of the seat, - the height and reach of the steering wheel, - the interior and door mirrors.

F Raise the control A and slide the seat forwards or backwards.

Before moving the seat backwards, ensure that there is no object or person in the way, preventing full travel of the seat. There is a risk of trapping or pinching passengers if present in the rear seats F or jamming the seat if large objects are Pull the control C upwards to raise the seat placed on the floor behind the seat. or push it downwards to lower it, as many times as required, to obtain the desired position.

43 Ease of use and comfort Lumbar support F To put the head restraint back in place, engage Heated seats the head restraint rods in the openings keeping (driver only) them in line with the seat backrest. F To lower the head restraint, press the lug A and push down on the head restraint at the same time.

F With the engine running, use the control wheel to switch on and select the level of heating required: F Turn the knob D manually to obtain the desired level of lumbar support. 0: Off. The head restraint has a frame with 1: Low. Head restraint height notches which prevents it from lowering; 2: Medium. this is a safety device in case of impact. 3: High. The adjustment is correct when the upper edge of the head restraint is level with the top of the head. The front seats can be heated individually. Never drive with the head restraints removed; they must be fitted and correctly adjusted. Before leaving the vehicle, ensure that the control wheel for the passenger seat is at position 0, so that the heating is not operating for no reason when no F To raise a head restraint, pull it upwards. passenger is present, during the next F To remove it, press the lug A and pull it journey. upwards. 44 Ease of use and comfort

Do not use the function when the seat is Prolonged use at the highest setting is Folding the backrest not occupied. not recommended for those with sensitive Reduce the intensity of the heating as skin. soon as possible. There is a risk of burns for people whose When the seat and passenger perception of heat is impaired (illness, compartment have reached an taking medication, etc.). adequate temperature, you can stop There is a risk of overheating the system if the function; reducing the consumption material with insulating properties is used, of electrical current reduces fuel such as cushions or seat covers. 3 consumption. Do not use the system: - if wearing damp clothing, - if child seats are fitted. To avoid breaking the heating element in F Move the front seats forward if necessary. the seat: F Position the seat belts on the backrest and - do not place heavy objects on the seat, buckle them. - do not kneel or stand on the seat, F Place the head restraints in the low position. - do not place sharp objects on the seat, - do not spill liquids onto the seat. To avoid the risk of short-circuit: - do not use liquid products for cleaning the seat, - never use the heating function when the seat is damp.

Rear seats Bench seat with fixed one-piece cushion and F Press the corresponding control 1 to folding backrest (1/3 - 2/3) to adapt the loading release the backrest 2. space in the boot. F Fold the backrest 2 onto the cushion.

45 Ease of use and comfort

When folding the seat, the centre seat belt Rear head restraints Steering wheel adjustment should not be fastened but laid out flat on These have one position for use (up) and a the backrest. stowed position (down).

The rear seat cushion remains fixed. To increase the boot volume, fold the backrest onto the cushion.

Returning the backrest to the normal position F When stationary, lower the control lever A to release the steering wheel adjustment mechanism. They can be removed and are interchangeable F Adjust the steering wheel height and reach side to side. to suit your driving position. To remove a head restraint: F Raise the control lever A to lock the steering F Pull the head restraint upwards as far as wheel adjustment mechanism. possible. As a safety precaution, these operations F Then, press the lug A. should only be carried out while the To refit a head restraint: vehicle is stationary. F Engage the head restraint rods in the F Straighten the backrest 2 and secure it. openings, keeping the head restraint in line F Unfasten and return the seat belts to the with the seat backrest. Mirrors sides of the backrest. To lower a head restraint: F Press down on the head restraint and on lug Door mirrors A at the same time. When repositioning the backrest, ensure that the seat belts are not trapped and the The objects observed are, in reality, closer red indicator, located next to the controls 1, Never drive with the head restraints than they appear. is no longer visible. removed; they must be in place and Take this into account in order to adjusted to the normal position (up). correctly judge the distance of vehicles approaching from behind.

46 Ease of use and comfort Electric adjustment Electric folding Rear view mirror If your vehicle is fitted with this function, the Equipped with an anti-dazzle system, which mirrors can be folded electrically from the inside, darkens the mirror glass and reduces the with the vehicle parked and the ignition on: nuisance to the driver caused by the sun, headlamps of other vehicles, etc.

Manual model Adjustment F 3 Adjust the mirror so that the glass is directed correctly in the "day" position. F Turn control to the right or left to select F Turn control A to opposite the mark. A Day/night position the corresponding mirror. F Move the control in all four directions to From outside: lock the vehicle using the remote adjust. control or the Keyless Entry and Starting F Return the control to the central position. system.

The folding and unfolding of the door mirrors when locking or unlocking the F Pull the lever to change to the "night" anti- As a safety measure, the mirrors should vehicle can be deactivated via the vehicle dazzle position. be adjusted to reduce the "blind spots". configuration menu. F Push the lever to change to the normal "day" position.

Manual folding Demisting – Defrosting Automatic "electrochrome" model You can manually fold the mirrors (parking Demisting-defrosting of the door obstruction, narrow garage, etc.). mirrors operates with the engine F Turn the mirror towards the vehicle. running, by switching on the heated rear screen.

For more information on Rear screen demisting – defrosting, refer to the corresponding section. 47 Ease of use and comfort This system automatically and progressively Control panel changes between the day and night uses by means of a sensor, which measures the light The controls of this system are from the rear of the vehicle. accessible in the "Air conditioning" menu of the touch screen A.

In order to ensure optimum visibility during The demisting/defrosting controls for the your manoeuvres, the mirror lightens windscreen and rear screen are located below automatically when reverse gear is the touch screen. engaged. Air distribution Ventilation 1. Windscreen demisting/defrosting vents. 2. Front side window demisting/defrosting Air intake vents. 3. Adjustable side air vent (driver only). The air circulating in the passenger 4. Central adjustable air vents. compartment is filtered and originates either 5. Air outlets to the front footwells. from the outside via the grille located at the base of the windscreen or from the inside in air 6. Air outlets to the rear footwells. recirculation mode. Air treatment The incoming air follows various routes depending on the controls selected by the driver: - direct arrival in the passenger compartment (air intake), - passage through a heating circuit (heating), - passage through a cooling circuit (air conditioning).

48 Ease of use and comfort

Recommendations for ventilation and air conditioning If the interior temperature is very high after the vehicle has stood for a long In order for these systems to be fully F If the system does not produce cold air, time in the sunshine, air the passenger effective, follow the operation and switch it off and contact a CITROËN compartment for a few moments. Put the air flow control at a setting high maintenance guidelines below: dealer or a qualified workshop. enough to quickly change the air in the F To ensure that the air is distributed When towing the maximum load on a steep passenger compartment. evenly, keep the external air intake gradient in high temperatures, switching off grilles at the base of the windscreen, the the air conditioning increases the available nozzles, the vents, the air outlets and engine power and so improves the towing The condensation created by the air 3 the air extractor in the boot free from ability. obstructions. To avoid the windows misting up and conditioning results in a discharge of water F Do not cover the sunshine sensor, deterioration in the quality of the air: under the vehicle which is perfectly normal. located on the dashboard; this is used - do not drive for too long with the for regulation of the automatic air ventilation switched off. conditioning system. - do not keep air recirculation set for an Stop & Start The heating and air conditioning systems F Operate the air conditioning system for extended period. only work when the engine is running. at least 5 to 10 minutes once or twice a Temporarily deactivate the Stop & month to keep it in perfect working order. Start system to maintain a comfortable F Replace the filter elements regularly. temperature in the passenger We recommend the use of a combined compartment. passenger compartment filter. Thanks to For more information on , its special active additive, it contributes Stop & Start refer to the corresponding section. to the purification of the air breathed by the occupants and the cleanliness of the passenger compartment (reduction of allergic symptoms, bad odours and greasy deposits). F To ensure correct operation of the air conditioning system, have it checked according to the recommendations in the Maintenance and Warranty Guide.

49 Ease of use and comfort F Select the Air conditioning Air distribution adjustment Heating/Manual air menu in the touch screen to display the controls page for the conditioning You can vary the air distribution in the system. passenger compartment using the buttons 3.

Temperature adjustment Windscreen.

F Press one of the arrows 2, or move the slider from blue (cold) to red (hot) to adjust Central and side vents. the temperature to your liking.

Footwells.

The heating only operates when the engine is Air flow adjustment running. F Press one of the buttons 4 to increase or Each press of a button activates or deactivates decrease the speed of the air booster fan. the function.

The symbol for air flow (a fan) fills progressively The three buttons can be activated according to the air flow setting made. simultaneously. In this case, the flows of By reducing the air flow to the minimum, you air from the central and side vents and the are stopping ventilation of the passenger footwell vents are favoured. compartment.

Avoid driving for too long without Air conditioning On/Off ventilation – Risk of misting and The manual air conditioning operates with the deterioration of air quality! The air conditioning is designed to operate engine running. effectively in all seasons, with the windows 1. Recirculation of interior air. closed. 2. Temperature adjustment. It allows you: 3. Air distribution adjustment. - in summer, to lower the temperature, 4. Air flow adjustment. - to increase the effectiveness of the demisting in winter, above 3°C. 5. Air conditioning On/Off. 50 Ease of use and comfort

F Press button 5 to activate/deactivate the air 3. Air distribution adjustment. Avoid driving for long periods with conditioning system. 4. Air flow adjustment. the system off – Risk of misting and When the indicator lamp is on, the air deterioration of air quality! 5. Air conditioning On/Off. conditioning function is activated. 6. Access to the secondary page. 7. Automatic mode. The air conditioning does not operate Depending on equipment. when the air flow adjustment is inhibited. Automatic air conditioning The locations of the buttons of the lower The air conditioning operates with the engine band may vary, depending on equipment. 3 Switching the system off running, but the ventilation and its controls are available with the ignition on. Operation of the air conditioning and regulation of temperature, air flow and air distribution in Temperature adjustment the passenger compartment are automatic. F Press one of the buttons 2 to decrease (blue) or increase (red) the value. F Select the Air conditioning menu in the touch screen to The value indicated corresponds to a level of display the controls page for the comfort and not to a precise temperature. F Press this button; the indicator lamp in the system. button comes on. For maximum cooling or heating of the This action switches off all of the functions of passenger compartment, press the the system. temperature setting button down or up The temperature is no longer controlled. until LO or HI is displayed. However, a slight flow of air, due to the movement of the vehicle, can still be felt. Pressing any button reactivates the system with the settings that were previously in use. Automatic comfort programme F Press the "AUTO" button 7 to activate or 1. Recirculation of interior air. deactivate the automatic mode of the air 2. Temperature adjustment. conditioning system. 51 Ease of use and comfort

The air conditioning system operates In cold weather with the engine cold, the Avoid driving for too long without automatically: the system manages the air flow is increased gradually until the ventilation – Risk of misting and temperature, air flow and air distribution in comfort setting has been reached, in order deterioration of air quality! the passenger compartment in an optimum to limit the delivery of cold air into the way according to the comfort level you have passenger compartment. selected. On entering the vehicle, if the interior F Go to the secondary page by pressing temperature is much colder or warmer Air distribution adjustment button 6 "OPTIONS" to adjust the automatic than the comfort setting requested, there comfort programme by choosing one of the is no need to alter the value displayed You can vary the air distribution in the available settings. in order to reach more quickly the passenger compartment using the buttons 3. F To change the current setting, required level of comfort. The system press the button several times in compensates automatically and corrects Windscreen. Mode AUTO succession to access the desired the temperature difference as quickly as mode: possible. Central and side vents. "Soft": provides soft and quiet operation by limiting air flow. You can manually adjust the air flow and distribution. Footwells. "Normal": offers the best compromise between As soon as you modify a setting, the automatic a comfortable temperature and quiet operation comfort programme is deactivated. (default setting). F Press the "AUTO" button 7 to activate the Each press of a button activates or deactivates "Fast": provides strong and effective air flow. automatic comfort programme again. the function. This setting is associated with AUTO mode only. However, on deactivation of AUTO mode, Air flow adjustment The three buttons can be activated the last setting used remains set. simultaneously. In this case, the flows of F Press one of the buttons 4 to increase or Changing the setting does not reactivate AUTO air from the central and side vents and the decrease the air flow from the system. mode if deactivated. footwell vents are favoured. The symbol for air flow (a fan) fills progressively according to the air flow setting made. By reducing the air flow to minimum, you are stopping ventilation. "OFF" is displayed alongside the fan.

52 Ease of use and comfort Air conditioning On/Off Switching the system off Recirculation of interior air The air conditioning is designed to operate The intake of exterior air helps avoid and effectively in all seasons, with the windows eliminate misting of the windscreen and side closed. windows. It allows you: Recirculation of the interior air isolates the - in summer, to lower the temperature, passenger compartment from exterior odours - to increase the effectiveness of the and fumes. demisting in winter, above 3°C. When so required, this function also 3 F Press button to activate/deactivate the air 5 F Press this button; the indicator lamp in the conditioning system. allows faster heating or cooling of the air button comes on. in the passenger compartment. When the indicator lamp is on, the air This action switches off all of the functions of conditioning function is activated. the system. F Press button 1 to recirculate the interior air The temperature is no longer controlled. or to permit the intake of outside air. The air conditioning does not operate However, a slight flow of air, due to the when the air flow adjustment is inhibited. movement of the vehicle, can still be felt. Pressing any button reactivates the system with Avoid the prolonged use of interior the settings that were previously in use. air recirculation – Risk of misting and Ventilation function with the deterioration of air quality! ignition on Avoid driving for long periods with When the ignition is switched on, you can the system off – Risk of misting and use the ventilation system to adjust the air deterioration of air quality! flow settings and the air distribution in the passenger compartment for a duration which depends on the battery charge.

This function does not operate the air conditioning.

53 Ease of use and comfort Front demisting – Rear screen demisting – Courtesy lamps defrosting defrosting

On/Off On/Off F Press this button to demist or defrost the F Press this button to demist or defrost the 1. Front courtesy lamp windscreen and side windows as quickly as rear screen and (depending on version) possible. The indicator lamp in the button the door mirrors. The indicator lamp in the 2. Front map reading lamps comes on. button comes on. The system automatically manages the air Demisting/defrosting switches off automatically conditioning (depending on version), air to prevent excessive electrical consumption. flow and air intake, and provides optimum F It is possible to stop the demisting/ distribution towards the windscreen and side defrosting operation before it is switched off windows. automatically by pressing this button again. F To switch off demisting/defrosting, press this The button indicator lamp goes off. button again. The indicator lamp goes off. Switch off the demisting/defrosting of 3. Rear courtesy lamp With Stop & Start, when demisting – the rear screen and door mirrors as 4. Rear map reading lamps defrosting has been activated, STOP soon as appropriate, as lower current mode is not available. consumption results in reduced fuel consumption. Front and rear courtesy lamps In this position, the courtesy lamp comes on gradually: Rear screen demisting – defrosting can only be operated when the engine is - when the vehicle is unlocked, running. - when the key is removed from the ignition, 54 Ease of use and comfort - when opening a door, Front and rear map reading - when the remote control locking button is Panoramic glazed sunroof activated, in order to locate your vehicle. lamps It switches off gradually: F With the ignition on, press the - when the vehicle is locked, corresponding switch. - when the ignition is switched on, - 30 seconds after the last door is closed. Take care to avoid leaving anything in contact with the courtesy lamps. 3 Permanently off.

This glazed roof provides increased visibility Boot lamp and light in the passenger compartment, while Permanent lighting. maintaining normal temperatures thanks to its "high thermal protection" coating.

In "permanent lighting" mode, the lighting time Advice on care varies according to the circumstances: In order to preserve the properties of the - when the ignition is off, approximately ten glazed roof, we recommend wiping or cleaning minutes, the inner glass using a clean, soft and dry - in energy saving mode, approximately thirty cloth. seconds, For stubborn stains, the glass should be - with the engine running, unlimited. cleaned using screenwash fluid, rinsed with clean water, then dried with a clean, soft cloth. When the courtesy lamp is in the It comes on automatically when the boot is "permanent lighting" position, the rear opened. courtesy lamp also comes on, except if it Different lighting times are provided: is in the "permanently off" position. Do not use soapy water, abrasive - with the ignition off, approximately ten To switch off the rear courtesy lamp, put it products, detergents (particularly those minutes, in the "permanently off" position. with an ammonia base), solvents, - in energy economy mode, approximately solutions with a high concentration of thirty seconds, alcohol, petrol, etc. - with the engine running, unlimited.

55 Ease of use and comfort 5. Open storage. Glove box Interior fittings (depending on version). 6. Cup holder. 7. Front armrest with storage. (depending on version). 8. Front door pockets. 9. Mats.

Sun visors

It can be used to hold a water bottle, the The driver's sun visor is fitted with a vanity vehicle's handbook pack, etc. mirror, with a concealing flap and a card holder F To open the glove box, raise the control and (or ticket holder). guide the lid to its open position notch.

Do not attach or stick anything to the passenger's sun visor; this could cause It houses an auxiliary JACK socket and injuries if the front airbag (fitted in the the front passenger airbag deactivation dashboard) is deployed. switch. 1. Sun visor. 2. Glove box. Never drive with the glove box open when It houses an auxiliary JACK socket. a passenger is at the front – it may cause 3. 12 V power socket (max. 120 W). injury during sharp deceleration! 4. USB port.

56 Ease of use and comfort 12 V socket USB port Auxiliary socket (JACK)

3 F To connect a 12 V accessory (max power: A USB port is located on the central console. 120 Watts), lift the cover and connect a It allows the connection of a portable device or suitable adaptor. a USB memory stick. It reads the audio files which are sent to your audio system and played via the vehicle's Do not exceed the maximum power rating speakers. of the socket (otherwise this could cause You can manage these files using the steering damage to your portable device). mounted controls or those on the touch screen. To connect a portable device so that you The connection of an electrical device can listen to your music files via the vehicle's not approved by CITROËN, such as a speakers. USB charger, may adversely affect the When the USB port is used, the portable The management of the files is done using your operation of vehicle electrical systems, device charges automatically. portable device. causing faults such as poor telephone A message is displayed if the power drawn reception or interference with displays in by the portable device exceeds the current For more information on Audio and the screens. supplied by the vehicle. telematics and, in particular, the use of this equipment, refer to the corresponding section.

57 Ease of use and comfort Front armrest Clothes hooks Refitting Opening To refit the mat on the driver's side: F position the mat correctly,

They are located above each rear door.

F For access to the closed storage space, lift the lever to open the lid. Mats Fitting This storage space can be used to house portable devices (mobile phone, MP3 When fitting the mat for the first time, on the player, etc.) which can be connected to the driver's side, use only the fixings provided. USB/Jack socket or charged from the 12 V The other mats are simply placed on the socket in the centre console. carpet. F reattach the fixings by pressing, Removing F check that the mat is secured correctly. To remove the mat on the driver's side: F move the seat as far back as possible, F unclip the fixings, F remove the mat.

58 Ease of use and comfort

1. Rear parcel shelf. To avoid any risk of jamming of the pedals: For versions with storage box: it must be 2. Hook. - only use mats which are suited to the in place before loading the boot. fixings already present in the vehicle; 3. Storage box. these fixings must be used, 4. Storage net (accessory). - do not fit one mat on top of another. 5. Storage net fixing rings. The use of mats not approved by CITROËN may interfere with access to Hook the pedals and hinder the operation of the The storage net fixing rings are not cruise control/speed limiter. intended to secure loads or restrain baggage. 3 The mats approved by CITROËN have two fixings located below the seat. Storage box

It can be used to secure shopping bags.

Take care to only hang up lightweight Boot fittings bags.

Rear parcel shelf

F Remove the boot carpet for access to the storage box. Depending on the configuration, it is laid out for storing: - a towing eye, - a temporary puncture repair kit, - a warning triangle, - etc. To remove the shelf: F release the two cords, 59 Ease of use and comfort

F gently lift the shelf, then remove it. There are several ways of storing it: - either upright behind the front seats, - or flat on the bottom of the boot.

Rear parcel shelf (commercial version)

It conceals the interior of the vehicle in combination with the existing shelf. Do not place hard or heavy objects on the rear parcel shelf. They can become dangerous projectiles in the event of a sudden braking or impact.

Do not place objects above the load stop.

60 Lighting and visibility Lighting control stalk Lighting off/Daytime running lamps. Headlamp dipping

In some weather conditions (e.g. low temperature or humidity), the presence Sidelamps only. of misting on the internal surface of the glass of the headlamps and rear lamps is Dipped or main beam headlamps. normal; it disappears after the lamps have Pull the stalk to switch between dipped and been on for a few minutes. main beam headlamps. Automatic illumination of headlamps. In the lighting off and sidelamps modes, the driver can switch on the main beam headlamps If one or more lamps fails, a message temporarily ("headlamp flash"), for as long as asks you to check the lamp or lamps the stalk is kept pulled. concerned. Without AUTO lighting 4 Display Travelling abroad Illumination of the corresponding indicator If planning to use your vehicle in a country lamp in the instrument panel confirms that the that drives on the other side of the road, lighting selected is on. the headlamp dipped beams must be adjusted to avoid dazzling oncoming Foglamps drivers. Contact a CITROËN dealer or a qualified workshop. The foglamps operate with the dipped and main With AUTO lighting beam headlamps.

Rear foglamp Main lighting Selection of main lighting mode Turn the ring to align the desired symbol with the marking. F To switch it on, turn the ring forwards.

61 Lighting and visibility

When the lighting is switched off automatically In good or rainy weather, both day and Switching on the lighting after (with AUTO model), the foglamp and the dipped night, using the front foglamps and the switching off the ignition beam headlamps will remain on. rear foglamp is prohibited. In these To reactivate the lighting control stalk, F To switch it off, turn the ring rearwards. situations, the power of their beams may rotate the ring to position "0" – lighting off, dazzle other drivers. They should only be then to the desired position. used in fog or falling snow. When the driver's door is opened, a Front and rear foglamps In these weather conditions, it is your temporary audible signal warns you that responsibility to switch on the foglamps the vehicle's lighting is on. and dipped beam headlamps manually as The lighting, with the exception of the the sunshine sensor may detect sufficient sidelamps, will switch off automatically light. after a maximum duration of thirty minutes Switch off the front and rear foglamps to prevent discharging of the battery. when they are no longer necessary.

Rotate and release the ring: F once forwards to switch on the front Direction indicators foglamps, F forwards a second time to switch on the rear foglamps, Switching off of the lighting when the F once backwards to switch off the rear ignition is switched off foglamps, On switching off the ignition, all of the F backwards a second time to switch off the lighting turns off immediately, except for front foglamps. dipped beam if automatic guide-me-home When the lighting is switched off automatically lighting is activated. (with AUTO model), or when the dipped beam headlamps are switched off manually, the foglamps and sidelamps remain on. F Turn the ring backwards to switch off the foglamps, the sidelamps will then switch off. F Left: lower the lighting control stalk beyond the point of resistance. F Right: raise the lighting control stalk beyond the point of resistance. 62 Lighting and visibility Three flashes Malfunction Daytime running lamps/ F Press briefly upwards or downwards, Sidelamps (LEDs) without going beyond the point of In the event of a malfunction of the resistance; the direction indicators will flash sunshine sensor, the lamps come 3 times. on, this warning lamp is displayed on the instrument panel together with an audible signal and/or a message. Contact a CITROËN dealer or a Automatic illumination of qualified workshop. headlamps The light-emitting diodes (LEDs) come on As soon as the light returns to a sufficient level Do not cover the sunshine sensor, automatically when the engine is started. or after the windscreen wipers are switched off, integrated with the rain sensor and located 4 They provide the following functions: the lamps are switched off automatically. at the top centre of the windscreen behind - Daytime running lamps (lighting control the rear view mirror; the associated stalk at position " " or " " with functions would no longer be controlled. 0 AUTO Switching on adequate light level). - Sidelamps (lighting control stalk in position "AUTO" with low light level or "Sidelamps In fog or snow, the sunshine sensor may only" or "Main or dipped beam headlamps"). detect sufficient light. In this case, the lighting will not come on automatically. F Turn the ring to the "AUTO" position. The activation of the function is accompanied The LEDs are brighter when operating as by the display of a message. daytime running lamps.

Switching off F Turn the ring to another position. Deactivation of the function is accompanied by the display of a message.

63 Lighting and visibility

Switching on Parking lamps Guide-me-home lighting F With the ignition off, "flash" the headlamps Vehicle side marking by illumination of the using the lighting control stalk. sidelamps on the traffic side only. Automatic F Another "headlamp flash" switches the function off. When the automatic illumination of headlamps is activated, if the ambient light level is Switching off low, the dipped beam headlamps come on The manual guide-me lighting goes off automatically when switching off the ignition. automatically at the end of a given period of time. Activation or deactivation, as well as the duration for the guide-me-home lighting can be set in the touch screen. Headlamp beam height adjustment F In the Driving/Vehicle menu, select the "Vehicle settings" tab, then "Headlamps" and F Depending on version, within one minute activate/deactivate "Guide-Me- of switching off the ignition, operate the Home Lighting". lighting control stalk up or down depending on the traffic side (for example, when parking on the right, move the lighting Manual control stalk downwards; the left-hand sidelamps light up). This is confirmed by an audible signal and illumination of the corresponding direction indicator lamp in the instrument panel. To avoid causing a nuisance to other road To switch off the parking lamps, return the users, the headlamp beams should be adjusted lighting control stalk to the central position. for height according to the vehicle's load. 0. Driver only or driver + front passenger. -. Driver + front passenger + rear The temporary illumination of the dipped beam passengers. headlamps after the vehicle's ignition has been switched off makes the driver's exit easier when the light is poor. 64 Lighting and visibility 1. Driver + front passenger + rear Switching off passengers + load in the boot. -. Driver + front passenger + rear The system does not operate: passengers + load in the boot. - below a certain angle of rotation of the 2. Driver only + maximum authorised load in steering wheel, the boot. - above 25 mph (40 km/h), - when reverse gear is engaged.

The initial setting is position 0. Activation/Deactivation

Without cornering lighting The system is activated or deactivated via the vehicle configuration menu.

F In the Driving/Vehicle menu 4 Cornering lighting of the touch screen, select the "Vehicle settings" tab then "Headlamps" and activate/ deactivate "Directional headlamps".

Wiper control stalk With cornering lighting If your vehicle is so equipped, this system In wintry conditions, remove snow, ice or makes use of the beam from a front foglamp frost present on the windscreen, around to illuminate the inside of a bend, when the Switching on the wiper arms and blades and the main or dipped beam headlamps are on and windscreen seal, before operating the the vehicle speed is below 25 mph (40 km/h) This system starts: wipers. (urban driving, winding road, intersections, - when the corresponding direction indicator parking manoeuvres, etc.). is switched on, or - from a certain angle of rotation of the steering wheel. 65 Lighting and visibility

Rear wiper selection ring: Do not operate the wipers on a dry Windscreen wipers windscreen. Under extremely hot or cold Raise or lower the control to the desired Off. conditions, ensure that the wiper blades position to change the wiping speed. are not stuck to the windscreen before operating the wipers. Intermittent wiping. Fast wiping (heavy rain).

Wash-wipe (set duration). Manual controls Normal wiping (moderate rain). The wipers are controlled directly by the driver. Intermittent wiping (proportional to Reverse gear the speed of the vehicle). When reverse gear is engaged, the rear wiper With manual wiping Off. will come into operation automatically if the windscreen wipers are operating. Single wipe (press downwards or The system is activated or deactivated via the pull the stalk briefly towards you, vehicle configuration menu. then release). This system is activated by default. or

Automatic wiping (press down, If a significant accumulation of snow or ice then release) or single wipe (pull is present, or when using a bicycle carrier the stalk briefly towards you). on the boot, deactivate the automatic rear With AUTO wiping wiper.

Rear wiper F In the Driving/Vehicle menu of the touch screen, select the "Vehicle settings" tab then "Parking" and activate/ deactivate "Rear wiper in reverse".

66 Lighting and visibility

This position permits release of the windscreen Front screenwash To avoid damaging the wiper blades, wiper blades. do not operate the screenwash if the It is used for cleaning or replacing the wiper screenwash reservoir is empty. blades. It can also be useful, in winter, to Only operate the screenwash if there release the wiper blades from the windscreen. is no risk of the fluid freezing on the windscreen and hindering visibility. Always use screenwash fluid suitable for low F Operate the wiper stalk within one minute temperatures during the winter period. after switching off the ignition to position the wiper blades vertically on the windscreen. F To park the wiper blades again, switch on the ignition and operate the wiper stalk. Special position of the windscreen wipers 4

To maintain the effectiveness of the wiper blades, it is advisable to: Pull the wiper control stalk towards you. - handle them with care, The screenwash and windscreen wiper operate - clean them regularly using soapy for as long as the control stalk is pulled. water, Stopping the screenwash is followed by a final - avoid using them to retain cardboard wiping cycle. on the windscreen, - replace them at the first signs of wear. Your vehicle is fitted with an innovative front screenwash system. The screenwash fluid is sprayed all along the length of the wiper blade, so avoiding impairment of the driver's view or that of the passengers.

67 Lighting and visibility

Automatic windscreen The automatic rain sensitive windscreen wipers wipers must be reactivated by pushing the control stalk downwards, if the ignition has The windscreen wipers operate automatically been off for more than one minute. once rain is detected (sensor behind the rear view mirror), adapting their speed to the intensity of the rain without any action on the part of the driver. Operating fault Switching on If a fault occurs with the automatic rain sensitive wipers, the wipers will operate in intermittent mode. Have them checked by a CITROËN dealer or a qualified workshop.

Do not cover the rain sensor, integrated with Give a short downwards push to the the sunshine sensor and located at the top control. centre of the windscreen, behind the rear A wiping cycle confirms that the view mirror. instruction has been accepted. When using an automatic car wash, switch This lamp comes on in the off the automatic rain sensitive wipers. instrument panel and a message is In winter, it is advisable to wait until the displayed. windscreen is completely clear of ice before Switching off activating the automatic rain sensitive wipers. Give the control stalk a brief push downwards or place the control stalk in another position (Int, 1 or 2).

This lamp goes off in the instrument panel and a message is displayed.

68 Safety

General safety We draw your attention to the following Installation of accessory radio recommendations points: communication transmitters - The fitting of electrical equipment Before installing a radio communication or accessories not approved by transmitter, you must contact a CITROËN CITROËN may cause excessive dealer for the specification of transmitters Labels are attached in different places on current consumption and faults and which can be fitted (frequency, maximum your vehicle. They include safety warnings failures with the electrical system of power, aerial position, specific installation as well as identification information for your vehicle. Contact a CITROËN requirements), in line with the Vehicle your vehicle. Do not remove them: they dealer for information on the range of Electromagnetic Compatibility Directive are an integral part of your vehicle. recommended accessories. (2004/104/EC). - As a safety measure, access to the diagnostic socket, used for the vehicle's electronic systems, is reserved strictly for CITROËN dealers For any work on your vehicle, use a or qualified workshops, equipped qualified workshop that has the technical with the special tools required (risk information, skills and equipment required, of malfunctions of the vehicle's Depending on country regulations, some 5 all of which a CITROËN dealer is able to electronic systems that could cause safety equipment may be compulsory: provide. breakdowns or serious accidents). high visibility safety vests, warning The manufacturer cannot be held triangles, breathalysers, spare bulbs, responsible if this advice is not spare fuses, fire extinguisher, first aid kit, followed. mud flaps at the rear of the vehicle, etc. - Any modification or adaptation not intended or authorised by CITROËN or carried out without meeting the technical requirements defined by the manufacturer will result in the suspension of the legal and contractual warranties.

69 Safety Hazard warning lamps Horn Localised Emergency Call In an emergency, press this button for more than 2 seconds. The flashing green LED and the voice message confirm that the call has been made to the "Localised Emergency Call" service*. F When you press this red button, all four Pressing this button again cancels the direction indicators flash. command and the green LED goes off. They can operate with the ignition off. The green LED remains on (without flashing) F Press the central part of the steering wheel. when communication is established. Automatic operation of It goes off at the end of the call. hazard warning lamps "Localised Emergency Call" immediately When braking in an emergency, depending on locates your vehicle and contacts you in the deceleration, the hazard warning lamps Emergency or assistance your own language**, and – if necessary – come on automatically. call requests that relevant emergency services be They switch off automatically the first time you dispatched**. In countries where the service is accelerate. not available, or when the locating service has F You can also switch them off by pressing been expressly declined, the call is sent directly the button. to the emergency services (112) without the vehicle location.

If an impact is detected by the airbag control unit, an emergency call is made automatically and independently of possible deployment of any airbags.

70 Safety * In accordance with the general conditions In both cases, the emergency and assistance Geolocation of service available from dealers and calls service may not work. subject to technological and technical Contact a qualified repairer as soon as limitations. possible. ** As per the geographic coverage of "Localised Emergency Call", "Localised You can deactivate geolocation by Assistance Call" and the official national The fault with the system does not prevent simultaneously pressing the "Localised language chosen by the owner of the the vehicle from being driven. Emergency Call" and "Localised Assistance vehicle. Call" buttons, followed by pressing "Localised The list of countries covered and of Assistance Call" to confirm. Telematic services is available from Localised Assistance Call To reactivate geolocation, simultaneously press dealers or on the website for your country. the "Localised Emergency Call" and "Localised Press this button for more than Assistance Call" buttons again, followed 2 seconds to request assistance if by pressing "Localised Assistance Call" to Operation of the system the vehicle breaks down. confirm. When the ignition is switched on, the green indicator lamp comes on for 3 seconds 5 A voice message confirms that the call has indicating that the system is operating correctly. been made**. If you purchased your vehicle outside the For all countries except Russia, Belarus CITROËN dealer network, we invite you to Pressing this button again immediately cancels and Kazakhstan. have a dealer check the configuration of the request. If the red indicator lamp flashes then goes off: these services and, if desired, modify it to The cancellation is confirmed by a voice there is a system fault. suit your wishes. In a multilingual country, message. If the red indicator lamp is on continuously: configuration is possible in the official national language of your choice. replace the back-up battery. ** A s per the geographic coverage of For Russia, Belarus and Kazakhstan. "Localised Emergency Call", "Localised If the red indicator lamp is on continuously: Assistance Call" and the official national language chosen by the owner of the there is a system fault. For technical reasons and, in particular, to vehicle. If the red indicator lamp flashes: replace the improve the quality of Telematic services The list of countries covered and of back-up battery. to customers, the manufacturer reserves Telematic services is available from dealers the right to carry out updates to the or on the website for your country. vehicle's on-board telematic system.

71 Safety

If you benefit from the Citroën Connect Emergency braking assistance Anti-lock braking system Box offer with the SOS and assistance (EBA) (ABS) and electronic brake pack included, there are additional In an emergency, this system permits the force distribution (EBFD) services available to you in your personal optimum braking pressure to be reached space, via the website for your country. more quickly, therefore reducing the stopping The fixed illumination of this warning distance. lamp indicates that there is a fault It is triggered in relation to the speed at which with the ABS. the brake pedal is pressed. The effect of this is Electronic stability control a reduction in the resistance of the pedal and If this warning lamp comes on, in (ESC) an increase in braking efficiency. conjunction with the STOP and ABS warning lamps, an audible Electronic stability control integrating the signal and a message, this indicates following systems: Anti-slip regulation (ASR) that the electronic brake force - anti-lock braking system (ABS) and The ASR system (also known as Traction distribution (EBFD) is faulty. You must stop as soon as it is electronic brake force distribution (EBFD), Control) optimises traction in order to limit - emergency braking assistance (EBA), safe to do so. wheel slip by acting on the brakes of the driving In both cases, have the system - wheel anti-slip regulation (ASR) or traction wheels and on the engine. It also improves checked by a CITROËN dealer or control, the directional stability of the vehicle on a qualified workshop as soon as - dynamic stability control (DSC). acceleration. possible.

Dynamic stability control (DSC) When changing wheels (tyres and rims), Definitions If there is a difference between the path ensure that these are approved for your Anti-lock braking system (ABS) followed by the vehicle and that required by vehicle. and electronic brake force the driver, the DSC monitors each wheel and distribution (EBFD) automatically acts on the brake of one or more Normal operation of the ABS may make This system improves the stability and wheels and on the engine to return the vehicle itself felt by slight vibration of the brake manoeuvrability of your vehicle when braking and to the required path, within the limits of the laws pedal. contributes towards improved control on corners, in of physics. particular on poor or slippery road surfaces. The ABS prevents wheel lock in the event of If you need to brake in an emergency, emergency braking. press the brake pedal very firmly and The electronic brake force distribution system (EBFD) manages the braking pressure wheel by wheel. keep the pressure applied. 72 Safety

Dynamic stability control (DSC) It is however recommended that the system be F In the Driving/Vehicle menu and anti-slip regulation (ASR) reactivated as soon as possible. of the touch screen, select the "Driving functions" tab, then F In the Driving/Vehicle menu "Traction control". Operation of the touch screen, select the Or depending on version: These systems are activated automatically "Driving functions" tab, then every time the vehicle is started. "Traction control". F Turn the "Grip control" knob to They come into operation in the event of a Or depending on version: problem with grip or trajectory. this position.

F Turn the "Grip control" knob to This is indicated by this warning this position. lamp flashing in the instrument Operating fault panel. The illumination of this warning Deactivation is signalled by the lamp, accompanied by an audible Activation illumination of this warning lamp, signal and a message, indicates that accompanied by a message as there is a fault with the system. These systems are activated automatically 5 well as illumination of the knob every time the vehicle is started. (depending on version). Contact a CITROËN dealer or a qualified As soon as they detect a problem of grip or workshop to have the system checked. trajectory, these systems act on the operation The ASR system no longer acts on the of the engine and brakes. operation of the engine or the brakes in the After an impact, have the system checked event of an involuntary change of trajectory. This is indicated by this warning by a CITROËN dealer or a qualified lamp flashing in the instrument workshop. panel. Reactivating the ASR The system is reactivated automatically each Deactivating the ASR time the ignition is switched back on or from In exceptional conditions (starting a vehicle 31 mph (50 km/h). which is bogged down, stuck in snow, on soft Below 31 mph (50 km/h), you can reactivate it ground, etc.), it may be advisable to deactivate manually: the ASR system, so that the wheels can move freely and regain grip.

73 Safety

ASR/DSC Grip control These systems offer increased safety Special patented traction control system which in normal driving, but they should not improves traction on snow, mud and sand. encourage the driver to take extra risks or This system, the operation of which has been drive at high speed. optimised for each situation, allows you to It is in conditions of reduced grip (rain, manoeuvre in most conditions of poor grip snow, ice) that the risk of loss of grip (encountered when using a passenger car). increases. It is therefore important for your Standard (ESC) safety to keep these systems activated in Associated with 205/50 R17 all-season M+S all conditions, and particularly in difficult (Mud and Snow) tyres, this system offers a This mode is calibrated for a low level of wheel conditions. compromise between safety, grip and traction. spin, based on the different levels of grip The correct operation of these These tyres are efficient in winter and summer normally encountered on the road. systems depends on observation of conditions. the manufacturer's recommendations F regarding as much the wheels (tyres and The accelerator pedal should be pressed Place the knob in this position. rims), braking and electronic components sufficiently to allow the system to use the power as the assembly and repair procedures of the engine. Operation at high engine speeds used by CITROËN dealers. is completely normal. To benefit in full from the effectiveness Every time the ignition is switched off, the A five-position selector knob allows you to of these systems in wintry conditions, system automatically resets to this mode. the vehicle must be fitted with four snow choose the setting best suited to the driving tyres, allowing the vehicle to retain neutral conditions encountered. behaviour on the road. An indicator lamp associated with each mode comes on to confirm your choice. Snow A specific and additional display appears This mode adapts its strategy to the conditions temporarily in the touch screen to confirm the of grip encountered for each of the two front selection made with the knob. wheels on moving off. (mode active up to 50 mph (80 km/h)) F Place the knob in this position.

74 Safety

All road (mud, damp grass, You can deactivate the ASR Seat belts etc.) and DSC systems by turning the knob to the "OFF" position. Front seat belts This mode, when moving off, allows considerable spin on the wheel with the least The ASR and DSC systems will no longer grip to optimise clearing of the mud and regain have an effect on engine operation or grip. At the same time, the wheel with the most the brakes in the event of an involuntary grip is controlled in such a way as to pass as change of trajectory. much torque as possible. These systems are reactivated When moving, the system optimises wheel spin automatically from 31 mph (50 km/h) or to respond to the driver's requirements as fully every time the ignition is switched on. as possible. (mode active up to 31 mph (50 km/h))

F Place the knob in this position. Driving recommendations Your vehicle is designed principally to drive on tarmac roads but it allows you to The front seat belts are fitted with a occasionally drive on other less passable pretensioning and force limiting system. 5 terrain. This system improves safety in the front However, it does not permit off-road seats in the event of a front or side impact. Sand driving such as: Depending on the severity of the impact, the This mode allows little spin on the two driving - crossing and driving on terrain which pretensioning system instantly tightens the seat wheels at the same time to allow the vehicle to could damage the underbody or strip belts against the body of the occupants. move forward and limit the risks of getting stuck away components (fuel pipe, fuel The pretensioning seat belts are active when in the sand. cooler, etc.) due to obstacles or stones the ignition is on. (mode active up to 75 mph (120 km/h)) in particular, The force limiter reduces the pressure of - driving on terrain with steep gradients the seat belt on the occupant's chest, thus F Place the knob in this position. and poor grip, improving their protection. - crossing a stream.

Do not use the other modes on sand as the vehicle may become stuck.

75 Safety

Fastening The rear seats are each fitted with a three-point 1. Front seat belts not fastened/unfastened seat belt. warning lamp in the instrument panel. 2. Front left seat belt warning lamp. Fastening 3. Front right seat belt warning lamp. 4. Rear right seat belt warning lamp. F Pull the strap then insert the tongue in the 5. Rear centre seat belt warning lamp. buckle. 6. Rear left seat belt warning lamp. F Check that the seat belt is fastened correctly by pulling the strap. From approximately 12 mph (20 km/h), the warning lamp(s) flash(es) for two minutes, F Pull the strap then insert the tongue in the Unfastening associated with an audible signal. Once these buckle. F Press the red button on the buckle. two minutes have elapsed, the warning lamp(s) F Check that the seat belt is fastened F Guide the seat belt as it reels in. remain(s) on until the driver or front passenger correctly by pulling the strap. fastens their seat belt.

Unfastening Seat belt(s) not fastened/ unfastened warning lamp(s) Front seat belt warning lamp(s) F Press the red button on the buckle. On switching on the ignition, warning lamp 1 F Guide the seat belt as it reels in. comes on in the instrument panel and the corresponding warning lamp (2 and 3) comes on in red in the seat belts and front passenger airbag warning lamps display if the driver's Rear seat belts seat belt or front passenger's seat belt is not fastened or is unfastened. Rear seat belt warning lamp(s)

The corresponding warning lamp (4 to 6) comes on in red in the seat belts and front passenger airbag warning lamps display if one or more rear passengers unfasten their seat belts.

76 Safety Advice

The driver must ensure that passengers use In order to be effective, a seat belt must: Recommendations for children the seat belts correctly and that they are all - be tightened as close to the body as Use a suitable child seat if the passenger is fastened before setting off. possible, less than 12 years old or shorter than one and Wherever you are seated in the vehicle, - be pulled in front of you with a smooth a half metres. always fasten your seat belt, even for short movement, checking that it does not twist, Never use the same seat belt to secure more journeys. - be used to restrain only one person, than one person. Do not interchange the seat belt buckles as - not show any signs of cuts or fraying, Never allow a child to travel on your lap. they will not fulfil their role fully. - not be converted or modified to avoid For more information on Child seats, refer to The seat belts are fitted with an inertia reel affecting its performance. the corresponding section. permitting automatic adjustment of the In accordance with current safety regulations, length of the strap to your size. The seat belt for all repairs on your vehicle's seat belts, go In the event of an impact is stowed automatically when not in use. to a qualified workshop with the skills and Depending on the nature and seriousness Before and after use, ensure that the seat equipment needed, which a CITROËN dealer of the impact, the pyrotechnic pretensioner belt is reeled in correctly. is able to provide. device may be deployed before and The lower part of the strap must be Have your seat belts checked regularly by 5 independently of the airbags. Deployment positioned as low as possible on the pelvis. a CITROËN dealer or a qualified workshop, of the pretensioners is accompanied by a The upper part must be positioned in the particularly if the straps show signs of slight discharge of harmless smoke and a hollow of the shoulder. damage. noise, due to the activation of the pyrotechnic The inertia reels have an automatic locking Clean the seat belt straps with soapy water or cartridge incorporated in the system. device at the time of a collision, during a textile cleaning product, sold by CITROËN In all cases, the airbag warning lamp comes sudden braking or if the vehicle turns over. dealers. on. You can release the device by pulling the After folding or moving a seat or rear bench Following an impact, have the seat belt strap firmly and then releasing it so that it seat, ensure that the seat belt is positioned system checked, and, if necessary, replaced, reels in slightly. and reeled in correctly. by a CITROËN dealer or a qualified workshop.

77 Safety

Airbags The airbags do not operate when the The deployment of an airbag is ignition is switched off. accompanied by a slight emission of General information This equipment will only deploy once. If a smoke and a noise, due to the detonation second impact occurs (during the same or of the pyrotechnic charge incorporated in System designed to contribute towards a subsequent accident), the airbag will not the system. improving passenger safety (with the exception be deployed again. This smoke is not harmful, but sensitive of the rear centre passenger) in the event of individuals may experience slight irritation. violent collisions. The airbags supplement the The detonation noise associated with the action of the seat belts fitted with force limiters Impact detection zones deployment of an airbag may result in a (all except the rear centre passenger). slight loss of hearing for a short time. If a collision occurs, the electronic detectors record and analyse the front and side impacts sustained in the impact detection zones: - in the case of a serious impact, the airbags are deployed instantly and contribute towards better protection of the occupants of the vehicle (with the exception of the rear Front airbags centre passenger); immediately after the impact, the airbags deflate rapidly so that they do not hinder visibility or the exit of the occupants, A. Front impact zone. - in the case of a minor or rear impact or B. Side impact zone. in certain rollover conditions, the airbags may not be deployed; the seat belt alone contributes towards ensuring your protection in these situations. System which protects the driver and front passenger in the event of a serious front impact in order to limit the risk of injury to the head and thorax. The driver's airbag is fitted in the centre of the steering wheel; the front passenger airbag is fitted in the dashboard above the glove box.

78 Safety

Deployment Deployment The airbags are deployed, except the front System which protects the driver and front The curtain airbag is deployed at the same passenger airbag if it is deactivated, in the passenger in the event of a serious side impact time as the corresponding lateral airbag in the event of a serious front impact to all or part in order to limit the risk of injury to the chest, event of a serious side impact applied to all or of the front impact zone A, in the longitudinal between the hip and the shoulder. part of the side impact zone B, perpendicular centreline of the vehicle on a horizontal plane Each lateral airbag is fitted in the seat backrest to the longitudinal centreline of the vehicle on a and directed from the front to the rear of the frame, door side. horizontal plane and directed from the outside vehicle. The front airbag inflates between the thorax towards the inside of the vehicle. and head of the front occupant of the vehicle Deployment The curtain airbag inflates between the front or and the steering wheel, driver's side, and the The lateral airbag is deployed unilaterally in rear occupant of the vehicle and the windows. dashboard, passenger's side, to cushion their the event of a severe side impact covering all forward movement. or part of side impact zone B, perpendicular to Malfunction the longitudinal centreline of the vehicle on a Malfunction horizontal plane and directed from the outside If this warning lamp comes on in the instrument panel, you must contact If this warning lamp comes on in the towards the inside of the vehicle. a CITROËN dealer or a qualified instrument panel, you must contact The lateral airbag inflates between the hip 5 a CITROËN dealer or a qualified and shoulder of the front occupant and the workshop to have the system workshop to have the system corresponding door trim panel. checked. checked. The airbags may no longer The airbags may no longer be deployed in the be deployed in the event of a serious event of a serious impact. impact. Curtain airbags System contributing towards greater protection In the event of a minor impact or bump on Lateral airbags for the driver and passengers (with the the side of the vehicle or if the vehicle rolls exception of the rear centre passenger) in the over, the airbags may not be deployed. event of a serious side impact in order to limit In the event of a rear or front collision, the risk of injury to the side of the head. none of the lateral airbags are deployed. Each curtain airbag is built into the pillars and the upper passenger compartment area.

79 Safety Advice

For the airbags to be fully effective, Front airbags A damaged door or any unauthorised or observe the safety recommendations Do not drive holding the steering wheel by its incorrectly executed work (modification or below. spokes or resting your hands on the centre repair) on the front doors or their interior trim Adopt a normal and upright sitting position. part of the wheel. could compromise the operation of these Fasten your seat belt, ensuring it is Passengers must not place their feet on the sensors – risk of malfunction of the lateral positioned correctly. dashboard. airbags! Do not leave anything between the Do not smoke as deployment of the airbags Such work must only be done by a CITROËN occupants and the airbags (a child, pet, can cause burns or the risk of injury from a dealer or a qualified workshop. object, etc.), nor fix or attach anything close cigarette or pipe. to the inflation trajectory of the airbags; Never remove or pierce the steering wheel or Curtain airbags this could cause injuries during their hit it violently. Do not attach anything or hang anything to deployment. Do not fit or attach anything to the steering the roof, as this could cause head injuries Never modify the original definition of your wheel or dashboard, this could cause injuries when the curtain airbag is deployed. vehicle, particularly in the area directly with deployment of the airbags. If fitted to your vehicle, do not remove the around the airbags. grab handles installed on the roof, they play a After an accident or if the vehicle has been Lateral airbags part in securing the curtain airbags. stolen or broken into, have the airbag Use only approved covers on the seats, systems checked. compatible with the deployment of the lateral All work on the airbag systems must be airbags. For information on the range of seat carried out by a CITROËN dealer or a covers suitable for your vehicle, contact a qualified workshop. CITROËN dealer. Even if all of the precautions mentioned Do not attach anything to or hang anything are observed, a risk of injury or of minor from the seat backrests (clothes, etc.) as this burns to the head, chest or arms when an could cause injuries to the thorax or arm if the airbag is deployed cannot be ruled out. The lateral airbag is deployed. airbag inflates almost instantly (within a few Do not sit with the upper part of the body any milliseconds) then deflates within the same nearer to the door than necessary. time discharging the hot gas via openings The vehicle's front door panels include side provided for this purpose. impact sensors.

80 Safety

General points relating to Ensure that the seat belt is positioned and "Forward facing" child seats tightened correctly. For child seats with a support leg, ensure that the latter is in firm and steady contact The regulations on carrying children are with the floor. specific to each country. Refer to the In the front: if necessary, adjust the legislation in force in your country. passenger seat. At the rear: if necessary, adjust the When a "forward facing" child seat is installed relevant front seat. on a rear passenger seat, move the vehicle's For maximum safety, please observe the front seat forward and straighten the backrest following recommendations: so that the legs of the child in the "forward - In accordance with European regulations, facing" child seat do not touch the vehicle's all children under the age of 12 or less Remove and stow the head restraint front seat. than one and a half metres tall must before installing a child seat with backrest travel in approved child seats suited to on a passenger seat. their weight, on seats fitted with a seat belt Refit the head restraint once the child seat Centre rear seat or ISOFIX mountings. has been removed. 5 - Statistically, the safest seats in your A child seat with a support leg must never be vehicle for carrying children are the rear installed on the centre rear passenger seat. seats. - A child weighing less than 9 kg must Child seat at the rear travel in the rearward facing position "Rearward facing" both in the front and in the rear. Child seat at the front "Rearward facing"

It is recommended that children travel on the rear seats of your vehicle: When a "rearward facing" child seat is installed - "rearward facing" up to the age of 3, on a rear passenger seat, move the vehicle's When a "rearward facing" child seat is installed - "forward facing" over the age of 3. front seat forwards and straighten the backrest on the front passenger seat, adjust the seat to so that the "rearward facing" child seat does the intermediate longitudinal position, with the not touch the vehicle's front seat. backrest straightened. 81 Safety

The front passenger airbag must be deactivated. Otherwise, the child risks being seriously injured or killed if the airbag is deployed.

The warning label present on both sides of the "Forward facing" passenger sun visor repeats this advice. In line with current legislation, this warning is available in all of the languages required on the Passenger seat adjusted to the intermediate following pages. longitudinal position.

When a "forward facing" child seat is installed on the front passenger seat, adjust the Passenger airbag OFF vehicle's seat to the intermediate longitudinal Deactivating the front position with the backrest straightened and leave the front passenger airbag activated. passenger airbag

Never install a "rearward facing" child Ensure that the seat belt is correctly restraint system on a seat protected by an tensioned. active front airbag. For child seats with a support leg, ensure This could cause the death of the child or that the latter is in firm contact with the serious injury. This label is located on the middle door pillar, floor. If necessary, adjust the passenger passenger side. seat.

For more information on the Airbags, refer to the corresponding section.

82 Safety

Deactivating the front To ensure the safety of your child, the front passenger airbag passenger airbag must be deactivated when you install a "rearward facing" child Only the front passenger airbag can be seat on the front passenger seat. deactivated. Otherwise, the child could risk being seriously injured or killed if the airbag were deployed.

Reactivating the front passenger airbag Once you have removed a "rearward facing" child seat, with the ignition off, turn the switch to the ON position to reactivate the airbag and so ensure the safety of a front passenger in the 5 event of an accident.

When the ignition is switched on, this warning lamp comes on in the seat belts and front passenger F With the ignition off, insert the key into the airbag warning lamps display passenger airbag deactivation switch. or in the instrument panel for F Turn it to the OFF position. approximately one minute to signal F Remove the key, leaving the switch in this that the front airbag is activated. position.

When the ignition is switched on, this warning lamp comes on in the seat belts and front passenger airbag warning lamps display or in the instrument panel. It stays on while the airbag is deactivated. 83 Safety

НИКОГА НЕ инсталирайте детско столче на седалка с АКТИВИРАНА предна ВЪЗДУШНА ВЪЗГЛАВНИЦА. Това може да причини BG СМЪРТ или СЕРИОЗНО НАРАНЯВАНЕ на детето. NIKDY neumisťujte dětské zádržné zařízení orientované směrem dozadu na sedadlo chráněné AKTIVOVANÝM čelním AIRBAGEM. Hrozí CS nebezpečí SMRTI DÍTĚTE nebo VÁŽNÉHO ZRANĚNÍ. Brug ALDRIG en bagudvendt barnestol på et sæde, der er beskyttet af en AKTIV AIRBAG. BARNET risikerer at blive ALVORLIGT DA KVÆSTET eller DRÆBT. Montieren Sie auf einem Sitz mit AKTIVIERTEM Front-Airbag NIEMALS einen Kindersitz oder eine Babyschale entgegen der Fahrtrichtung, DE das Kind könnte schwere oder sogar tödliche Verletzungen erleiden. Μη χρησιμοποιείτε ΠΟΤΕ παιδικό κάθισμα με την πλάτη του προς το εμπρός μέρος του αυτοκινήτου, σε μια θέση που προστατεύεται από EL ΜΕΤΩΠΙΚΟ αερόσακο που είναι ΕΝΕΡΓΟΣ. Αυτό μπορεί να έχει σαν συνέπεια το ΘΑΝΑΤΟ ή το ΣΟΒΑΡΟ ΤΡΑΥΜΑΤΙΣΜΟ του ΠΑΙΔΙΟΥ NEVER use a rearward facing child restraint on a seat protected by an ACTIVE AIRBAG in front of it, DEATH or SERIOUS INJURY to the EN CHILD can occur NO INSTALAR NUNCA un sistema de retención para niños de espaldas al sentido de la marcha en un asiento protegido mediante un ES AIRBAG frontal ACTIVADO, ya que podría causar lesiones GRAVES o incluso la MUERTE del niño. Ärge MITTE KUNAGI paigaldage "seljaga sõidusuunas" lapseistet juhi kõrvalistmele, mille ESITURVAPADI on AKTIVEERITUD. Turvapadja ET avanemine võib last TÕSISELT või ELUOHTLIKULT vigastada. ÄLÄ KOSKAAN aseta lapsen turvaistuinta selkä ajosuuntaan istuimelle, jonka edessä suojana on käyttöön aktivoitu TURVATYYNY. Sen FI laukeaminen voi aiheuttaa LAPSEN KUOLEMAN tai VAKAVAN LOUKKAANTUMISEN. NE JAMAIS installer de système de retenue pour enfants faisant face vers l'arrière sur un siège protégé par un COUSSIN GONFLABLE FR frontal ACTIVÉ. Cela peut provoquer la MORT de l'ENFANT ou le BLESSER GRAVEMENT. NIKADA ne postavljati dječju sjedalicu leđima u smjeru vožnje na sjedalo zaštićeno UKLJUČENIM prednjim ZRAČNIM JASTUKOM. To bi HR moglo uzrokovati SMRT ili TEŠKU OZLJEDU djeteta. SOHA ne használjon menetiránynak háttal beszerelt gyermekülést AKTIVÁLT (BEKAPCSOLT) FRONTLÉGZSÁKKAL védett ülésen. Ez a HU gyermek HALÁLÁT vagy SÚLYOS SÉRÜLÉSÉT okozhatja. NON installare MAI seggiolini per bambini posizionati in senso contrario a quello di marcia su un sedile protetto da un AIRBAG frontale IT ATTIVATO. Ciò potrebbe provocare la MORTE o FERITE GRAVI al bambino. NIEKADA neįrenkite vaiko prilaikymo priemonės su atgal atgręžtu vaiku ant sėdynės, kuri saugoma VEIKIANČIOS priekinės ORO LT PAGALVĖS. Išsiskleidus oro pagalvei vaikas gali būti MIRTINAI arba SUNKIAI TRAUMUOTAS. 84 Safety

NEKAD NEuzstādiet uz aizmuguri vērstu bērnu sēdeklīti priekšējā pasažiera sēdvietā, kurā ir AKTIVIZĒTS priekšējais DROŠĪBAS GAISA LV SPILVENS. Tas var izraisīt BĒRNA NĀVI vai radīt NOPIETNUS IEVAINOJUMUS.

MT Qatt m’ghandek thalli tifel/tifla marbut f’siggu dahru lejn l-Airbag attiva, ghaliex tista’ tikkawza korriment serju jew anke mewt lit-tifel/tifla

Plaats NOOIT een kinderzitje met de rug in de rijrichting op een zitplaats waarvan de AIRBAG is INGESCHAKELD. Bij het afgaan van de NL airbag kan het KIND LEVENSGEVAARLIJK GEWOND RAKEN Installer ALDRI et barnesete med ryggen mot kjøreretningen i et sete som er beskyttet med en frontal AKTIVERT KOLLISJONSPUTE, NO BARNET risikerer å bli DREPT eller HARDT SKADET. NIGDY nie instalować fotelika dziecięcego w pozycji "tyłem do kierunku jazdy" na siedzeniu wyposażonym w CZOŁOWĄ PODUSZKĘ PL POWIETRZNĄ w stanie AKTYWNYM. Może to doprowadzić do ŚMIERCI DZIECKA lub spowodować u niego POWAŻNE OBRAŻENIA CIAŁA. NUNCA instale um sistema de retenção para crianças de costas para a estrada num banco protegido por um AIRBAG frontal ACTIVADO. Esta PT instalação poderá provocar FERIMENTOS GRAVES ou a MORTE da CRIANÇA. Nu instalati NICIODATA un sistem de retinere pentru copii, dispus cu spatele in directia de mers, pe un loc din vehicul protejat cu AIRBAG RO frontal ACTIVAT. Aceasta ar putea provoca MOARTEA COPILULUI sau RANIREA lui GRAVA. 5 ВО ВСЕХ СЛУЧАЯХ ЗАПРЕЩАЕТСЯ использовать обращенное назад детское удерживающее устройство на сиденье, защищенном RU ФУНКЦИОНИРУЮЩЕЙ ПОДУШКОЙ БЕЗОПАСНОСТИ, установленной перед этим сиденьем. Это может привести к ГИБЕЛИ РЕБЕНКА или НАНЕСЕНИЮ ЕМУ СЕРЬЕЗНЫХ ТЕЛЕСНЫХ ПОВРЕЖДЕНИЙ NIKDY neinštalujte detské zádržné zariadenie orientované smerom dozadu na sedadlo chránené AKTIVOVANÝM čelným AIRBAGOM. Mohlo SK by dôjsť k SMRTEĽNÉMU alebo VÁŽNEMU PORANENIU DIEŤAŤA. NIKOLI ne nameščajte otroškega sedeža s hrbtom v smeri vožnje, če je VARNOSTNA BLAZINA pred sprednjim sopotnikovim sedežem SL AKTIVIRANA. Takšna namestitev lahko povzroči SMRT OTROKA ali HUDE POŠKODBE. NIKADA ne koristite dečje sedište koje se okreće unazad na sedištu zaštićenim AKTIVNIM VAZDUŠNIM JASTUKOM ispred njega, jer mogu SR nastupiti SMRT ili OZBILJNA POVREDA DETETA. Passagerarkrockkudden fram MÅSTE vara avaktiverad om en bakåtvänd bilbarnstol installeras på denna plats. Annars riskerar barnet att SV DÖDAS eller SKADAS ALLVARLIGT. KESİNLKLE HAVA YASTIĞI AKTİF olan ön koltuğa yüzü arkaya dönük bir çocuk koltuğu yerleştirmeyiniz. Bu ÇOCUĞUN ÖLMESİNE veya TR ÇOK AĞIR YARALANMASINA sebep olabilir.

85 Safety

Recommended child Groups 2 and 3: from 15 to 36 kg seats Range of recommended child seats which are secured using a three-point seat belt.

Group 0+: from birth to 13 kg

L5 "RÖMER KIDFIX" Can be fitted to the vehicle's ISOFIX mountings. The child is restrained by the seat belt. L1 "RÖMER Baby-Safe Plus" Installed in the rearward facing position.

Groups 2 and 3: from 15 to 36 kg

L4 "KLIPPAN Optima" From 22 kg (approximately 6 years), the booster is used on its own.

86 Safety Locations for child seats secured using a seat belt In accordance with European regulations, this table indicates the options for installing child seats secured using the seat belt and universally approved (a) in relation to the weight of the child and the seat in the vehicle.

Weight of the child/indicative age Group 1 Group 2 Group 3 Groups 0 (b) and 0+ From 9 to 18 kg From 15 to 25 kg From 22 to 36 kg Seat Birth to 13 kg From about 1 to From about 3 to From about 6 to Up to about 1 year 3 years 6 years 10 years

Front passenger seat 1st row (c) without height U U U U adjustment (d)

Outer rear seats (e) U U U U 5 2nd row Centre rear seat (e) U (f) U (f) U U

(a) Universal child seat: child seat that can be (d) When a "rearward facing" child seat (e) To install a child seat on a rear seat, installed in any vehicle using the seat belt. is placed on the front passenger seat, the "rearward facing" or "forward facing", move the (b) Group 0: from birth to 10 kg. Carrycots front passenger airbag must be deactivated. front seat forward, then straighten the backrest and "car cots" cannot be installed on the front Otherwise, the child could risk being seriously to allow enough space for the child seat and passenger seat. injured or killed if the airbag were deployed. the child's legs. When installed in the 2nd row, they may prevent When a "forward facing" child seat is installed (f) A child seat with support leg must never be the use of one or more seats. on the front passenger seat, leave the front installed on the centre rear seat. (c) Refer to the legislation in force in your passenger airbag activated. U: seating position suitable for the installation country before putting your child in this of a child seat secured using the seat belt and position. universally approved "rearward facing" and/or "forward facing".

87 Safety

F attach the hook of the upper strap to ring B, ISOFIX mountings F tighten the upper strap. The seats, illustrated below, are fitted with regulation ISOFIX mountings:

When fitting an ISOFIX child seat to the left-hand rear position of the bench seat, before fitting the seat, first move the centre rear seat belt towards the middle of the vehicle, so as to avoid interference with the operation of the seat belt. - a ring B, behind the seat and identified by a marking, referred to as the TOP TETHER , for fixing the upper strap. There are three rings for each seat: This arrangement reduces forward tipping of The incorrect installation of a child seat the child seat in the event of a front impact. in a vehicle compromises the child's This ISOFIX mounting system provides fast, protection in the event of an accident. reliable and safe fitting of the child seat in your Strictly follow the fitting instructions vehicle. provided in the user guide supplied with The ISOFIX child seats are fitted with two the child seat. latches which are secured to the two rings A. Some seats also have a upper strap, which is attached to ring B. For information on the possibilities for installing ISOFIX child seats in your vehicle, refer to the summary table.

To secure the child seat at the TOP TETHER: - two rings A, located between the vehicle F remove and stow the head restraint before seat backrest and cushion, indicated by a installing the child seat on the seat (refit it marking, once the child seat has been removed), F pass the upper strap of the child seat behind the seat backrest, centring it between the apertures of the head restraint rods,

88 Safety

Recommended ISOFIX "RÖMER Duo Plus ISOFIX" child seats (size category: B1)

Also consult the installation notes from the Group 1: from 9 to 18 kg child seat's manufacturer to find out how to install and remove the seat.

"RÖMER Baby-Safe Plus and its ISOFIX base" (size category: E)

Group 0+: from birth to 13 kg

Is installed only in the forward facing position. Is attached to the rings A and the upper ring 5 B, referred to as the TOP TETHER, using an upper strap. 3 seat body angles: sitting, reclining and lying down. This child seat can also be used on seats not equipped with ISOFIX mountings. In this case, it must be secured to the vehicle's seat by the three-point seat belt. Adjust the Installed rearward facing using an ISOFIX position of the vehicle's front seat so that the base attached to rings A. child's feet are not touching the backrest. The base has a support leg, height- adjustable, which rests on the vehicle's floor. This child seat can also be secured with a seat belt. In this case, only the shell is used and attached to the vehicle seat using the three-point seat belt.

89 Safety Summary table of locations for ISOFIX child seats In line with European regulations, this table indicates the options for installing ISOFIX child seats on the vehicle seats fitted with ISOFIX mountings. In the case of universal and semi-universal ISOFIX child seats, the ISOFIX size category of the child seat, determined by a letter between A to G, is indicated on the child seat next to the ISOFIX logo.

Weight of the child/indicative age

Under 10 kg Under 10 kg (group 0) (group 0) From 9 to 18 kg (group 1) Under 13 kg Up to about From about 1 to 3 years (group 0+) 6 months Up to about 1 year

Type of ISOFIX child seat Carrycot rearward facing rearward facing forward facing

ISOFIX size category FGCDECDAB B1

Front passenger 1st row Not ISOFIX seat

IUF Outer rear seats IL-SU* IL-SU IL-SU IL-SU IL-SU IL-SU 2nd row Centre rear seat Not ISOFIX

* The ISOFIX carrycot, secured to the lower IL-SU: seat position suitable for the installation - a carrycot seat fitted with an upper strap or rings of an ISOFIX seat, occupies all of the of an Isofix Semi-Universal seat either: a support leg. space on the rear bench seat. - "rearward facing" fitted with an upper strap For more information on ISOFIX child seats IUF: seat suitable for the installation of an Isofix or a support leg, and the upper strap, refer to the corresponding Universal seat, "Forward facing" secured - "forward facing" fitted with a support leg, section. using the upper strap. 90 Safety

Locations for i-Size child i-Size child seat seats i-Size child seats have two latches that engage Front passenger 1st row Not i-Size on the two rings A. seat i-Size child seats also have: - either an upper strap that is attached to ring B, - or a support leg resting on the vehicle floor, Outer rear seats i-U compatible with the approved i-Size seat, (a) the role of which is to prevent the child seat 2nd row from tipping forward in the event of a collision. Centre rear seat Not i-Size For more information on ISOFIX mountings, refer to the corresponding section. In accordance with the new European i-U: suitable for i-Size restraint systems in regulations, this table indicates the options the "Universal" category, forward facing for installing i-Size child seats on seats in the and rearward facing. 5 vehicle fitted with ISOFIX mountings approved (a) To install a child seat at the rear, for i-Size. rearward or forward facing, move the front seat forward, then adjust the backrest to an upright position to allow enough room for the child seat and the child's legs.

91 Safety Advice

The incorrect installation of a child seat in a The head restraint must be removed As a safety precaution, do not leave: vehicle compromises the child's protection in before installing a child seat with a - a child or children alone and unattended in the event of an accident. backrest on a passenger seat. a vehicle, Ensure that there is no seat belt or seat belt Ensure that the head restraint is stored or - a child or an animal in a vehicle which buckle under the child seat, as this could attached securely to prevent it from being is exposed to the sun, with the windows destabilise it. thrown around the vehicle in the event of closed, Remember to fasten the seat belts or the sharp braking. Refit the head restraint when - the keys within reach of children inside the child seat harnesses keeping the slack the child seat is removed. vehicle. relative to the child's body to a minimum, To prevent accidental opening of the doors even for short journeys. Children in front and rear windows, use the child lock. When installing a child seat using the seat The legislation on carrying children on the Take care not to open the rear windows by belt, ensure that the seat belt is tightened front passenger seat is specific to each more than one third. correctly on the child seat and that it secures country. Refer to the legislation in force in To protect young children from the rays of the the child seat firmly on the seat of your your country. sun, fit side blinds on the rear windows. vehicle. If your passenger seat is adjustable, Deactivate the front passenger airbag when a move it forwards if necessary. "rearward facing" child seat is installed on the At rear seating positions, always leave front passenger seat. sufficient space between the front seat and: Otherwise, there is a risk of serious or fatal - a "rearward facing" child seat, injury to the child if the airbag is deployed. - the child's feet for a child seat fitted "forward facing". Installing a booster seat To do this, move the front seat forwards The chest part of the seat belt must be and, if necessary, move its backrest into the positioned on the child's shoulder without upright position. touching the neck. For optimal installation of the "forward facing" Ensure that the lap part of the seat belt child seat, verify that its backrest is as close passes correctly over the child's thighs. as possible to the backrest of the vehicle We recommend using a booster seat with seat, if possible in contact with it. a backrest equipped with a belt guide at shoulder level.

92 Safety Unlocking With the ignition on: Manual child lock F press this button; its indicator lamp comes F Using the ignition key or the integral key, on, accompanied by a message to confirm depending on version, turn the red control the activation, as far as it will go: F press this button again; its indicator lamp - to the left on the left-hand rear door, goes off, accompanied by a message to Mechanical system to prevent opening of a rear - to the right on the right-hand rear door. confirm the deactivation. door using its interior control. The indicator lamp remains on for as long as The control is located on the edge of each rear the child lock is activated. Opening the doors door. Do not confuse the child lock control, from the outside remains possible. which is red, with the back-up locking The indicator lamp remains off for as long as Locking control, which is black. the child lock is deactivated.

Any other state of the indicator lamp indicates a fault with the electric child lock. Have it checked by a CITROËN dealer or Electric child lock a qualified workshop. 5

Remotely operated system to prevent opening This system is independent and in no of the rear doors using their interior controls. circumstances does it take the place of the central locking control. Check the status of the child locks each F Using the ignition key or the integral key, Activation/Deactivation time you switch on the ignition. depending on version, turn the red control Always remove the key from the ignition as far as it will go: when leaving the vehicle, even for a short - to the right on the left-hand rear door, time. - to the left on the right-hand rear door.

93 Driving Driving recommendations Important! Observe the driving regulations and remain Never drive with the parking brake applied – vigilant whatever the traffic conditions. Risk of overheating and damage to the Pay close attention to the traffic and keep your braking system! hands on the wheel so that you are ready to As the exhaust system of your vehicle react at any time to any eventuality. is very hot, even several minutes after As a safety measure, the driver should only switching off the engine, never park or run carry out any operations that require close If you are obliged to drive through water: the engine on inflammable surfaces (dry attention when the vehicle is stationary. - check that the depth of water does not grass, fallen leaves, etc.): Risk of fire! On a long journey, a break every two hours is exceed 15 cm, taking account of waves that strongly recommended. might be generated by other users, In bad weather, drive smoothly, anticipate the - deactivate the Stop & Start function, need to brake and increase the distance from - drive as slowly as possible without stalling. other vehicles. Under no circumstances exceed 6 mph (10 km/h), Never leave a vehicle unsupervised with - do not stop and do not switch off the engine. the engine running. If you have to leave On leaving the flooded road, as soon as your vehicle with the engine running, apply circumstances allow, make several light brake the parking brake and put the gearbox into Never leave the engine running in applications to dry the brake discs and pads. neutral or position or , depending on an enclosed area without adequate N P If in doubt about the state of your vehicle, the type of gearbox. ventilation: internal combustion engines contact a CITROËN dealer or a qualified emit toxic exhaust gases, such as carbon workshop. monoxide. There is a risk of poisoning and death! In very severe wintry conditions Driving on flooded roads (temperatures below -23°C), to guarantee correct operation and the longevity of We strongly advise against driving on flooded the mechanical elements of your vehicle, roads, as this could cause serious damage engine and gearbox, the engine must be to the engine or gearbox, as well as to the left running for 4 minutes before driving. electrical systems of your vehicle.

94 Driving

In case of towing New vehicle If the exterior temperature is high, it is Do not pull a trailer before having driven at recommended that the engine be allowed Driving with a trailer places greater least 620 miles (1,000 kilometres). to idle for 1 to 2 minutes after the vehicle demands on the towing vehicle and comes to a stop, to facilitate its cooling. requires extra care from the driver. Braking Towing a trailer increases the braking distance. Anti-theft protection To avoid overheating of the brakes, the use of Side wind engine braking is recommended. Electronic immobiliser F Take into account the increased sensitivity The key contains an electronic chip which has to wind. Tyres a secret code. When the ignition is switched on, this code must be recognised to enable F Check the tyre pressures of the towing vehicle start. Cooling vehicle and of the trailer, observing the This electronic engine immobiliser locks recommended pressures. Towing a trailer on a slope increases the the engine management system a moment temperature of the coolant. after the ignition is switched off and prevents As the fan is electrically controlled, its cooling Lighting unauthorised engine starting. capacity is not dependent on the engine speed. F Check the electrical lighting and signalling F To lower the engine speed, reduce your on the trailer and the headlamp beam height In the event of a fault, you are speed. 6 of your vehicle. informed by the illumination of this The maximum towed load on an incline warning lamp, an audible signal and depends on the gradient and the exterior a message in the screen. temperature. In all cases, keep a check on the coolant For more information on Headlamp In this case, your vehicle will not start; contact temperature. beam height adjustment, refer to the a CITROËN dealer or a qualified workshop as corresponding section. soon as possible. F If this warning lamp and the STOP warning lamp come on, For safety and theft protection reasons, stop the vehicle and switch off Certain driving or manoeuvring aid do not leave your electronic key in the the engine as soon as possible. functions are automatically disabled if an vehicle, even when you are close to it. approved towing device is used. It is recommended that you keep it with you.

95 Driving

F With a petrol engine, operate the starter Starting/Switching off the Avoid attaching heavy objects to the key motor by turning the key to position 3 or the remote control, which would weigh engine with the key without pressing the accelerator pedal, down on its blade in the ignition switch until the engine starts. Once the engine is and could cause a malfunction. Ignition switch running, release the key. F With a Diesel engine, turn the key to position 2, ignition on, to operate the engine Switching off the engine leads to a loss of pre-heating system. braking assistance.

Wait until this warning lamp goes off Starting the engine in the instrument panel, then operate the starter motor by turning the key Parking brake applied: to position 3 without pressing the F With a manual gearbox, place the gear accelerator pedal, until the engine It has 3 positions: lever in neutral then depress the clutch starts. Once the engine is running, - position 1 (Stop): inserting and removing pedal fully. release the key. the key, steering column locked, F With an automatic gearbox, place the gear - position 2 (Ignition on): steering column selector in mode N or P then depress the In wintry conditions, the warning lamp unlocked, ignition on, Diesel pre-heating, brake pedal fully. can stay on for a longer period. When the engine running, F With an electronic gearbox, place the gear engine is hot, the warning lamp does not - position 3 (Starting). selector in mode N then depress the brake come on. pedal fully. Ignition on position (2) F Insert the key into the ignition switch; the If the engine does not start straight away, system recognises the code. switch off the ignition. Wait a few moments It allows the use of the vehicle's electric F Unlock the steering column by before operating the starter motor again. equipment or portable devices to be charged. simultaneously turning the steering wheel If the engine does not start after several Once the state of charge of the battery drops and the key. to the reserve level, the system switches to attempts, do not keep trying: you risk energy economy mode: the power supply is damaging the starter motor or the engine. cut off automatically to preserve the remaining Contact a CITROËN dealer or a qualified In certain cases, you may have to apply battery charge. workshop. more force to the steering wheel (wheels on full lock, for example).

96 Driving

In temperate conditions, do not let the To facilitate unlocking of the steering Key left in engine idle to warm up but move off column, it is recommended that the If the key has been left in the ignition straight away and drive at moderate wheels be returned to the straight ahead switch at position 2 (Ignition on), the speed. position before switching off the engine. ignition will be switched off automatically after one hour. F Check that the parking brake is correctly To switch the ignition back on, turn the key Never leave the engine running in applied, particularly on sloping ground. to position 1 (Stop), then back to position an enclosed area without adequate 2 (Ignition on). ventilation: internal combustion engines emit toxic exhaust gases, such as carbon monoxide. Danger of poisoning and death! Never switch off the ignition before the In very extreme wintry conditions vehicle is at a complete stop. With the Starting/Switching off the (temperature below -23°C), to guarantee engine off, the braking and steering correct operation and the longevity of assistance systems are also cut off: risk of engine with Keyless Entry the mechanical elements of your vehicle, loss of control of the vehicle. and Starting engine and gearbox, the engine must be left running for four minutes before Starting the engine starting the vehicle. When you leave the vehicle, keep the key with you and lock the vehicle. 6 Switching off the engine Energy economy mode F Stop the vehicle. After switching off the engine (position 1 – F With the engine running in idle, turn the key Stop), for a maximum of 30 minutes you to position 1. can still use functions such as the audio and F Remove the key from the ignition switch. telematics system, the wipers, dipped beam F To lock the steering column, turn the headlamps, courtesy lamps, etc. steering wheel until it locks. F Place the electronic key inside the vehicle, in the recognition zone. For more information on Energy F With a manual gearbox, place the gear economy mode, refer to the lever in neutral then depress the clutch corresponding section. pedal fully.

97 Driving F With an automatic gearbox, place the gear F With an automatic or electronic gearbox, Switching off the engine selector in mode P or N then depress the you should keep the brake pedal fully brake pedal fully. depressed until the warning lamp goes off F Immobilise the vehicle, engine at idle. F With an electronic gearbox, place the gear and not press the "START/STOP" button F With a manual gearbox, put the gear lever selector in mode N then depress the brake again until the engine is running. into neutral. pedal fully. F With an automatic gearbox, place the gear selector in mode P or N. The presence of the "Keyless Entry and F With an electronic gearbox, select mode Starting" electronic key in the recognition N. zone is essential. F With the electronic key inside the vehicle, If the electronic key is not detected in this press the "START/STOP" button. zone, a message is displayed. The engine stops and the steering column F Briefly press the "START/STOP" button Move the electronic key into this zone so locks. while maintaining pressure on the pedal that the engine can be started. In some circumstances, it is necessary to turn until the engine starts. If there is still a problem, refer to the "Key the steering wheel slightly to lock the steering The steering column unlocks and the engine not detected – Back-up starting" section. column. starts. For Diesel engines, when the temperature is below zero and/or the engine is cold, starting If the vehicle is not immobilised, the will only be done once the pre-heater warning engine will not stop. lamp is off. If one of the starting conditions is not met, a reminder message is displayed in the If this warning lamp comes on after Never leave your vehicle with the instrument panel. pressing the "START/STOP" button: electronic key still inside. In some circumstances, it is necessary to turn the steering wheel slightly while F With a manual gearbox, you should keep pressing the "START/STOP" button to the clutch pedal fully depressed until the Switching off the engine leads to a loss of assist unlocking of the steering column; a warning lamp goes off and not press the braking assistance. message warns you when this is needed. "START/STOP" button again until the engine is running. For safety reasons, never leave the vehicle while the engine is running.

98 Driving Switching the ignition on Key not detected Back-up switch-off (without starting) Back-up starting A back-up reader is fitted underneath the parking brake lever so that the engine can be started if the system does not detect the key in the recognition zone, or when the battery in the electronic key is flat.

When the electronic key is not detected or is With the Keyless Entry and Starting remote no longer in the recognition zone, a message control inside the vehicle, pressing the appears on the touch screen when closing a "START/STOP" button, with no action on the door or trying to switch off the engine. pedals, allows the ignition to be switched on. F To confirm the instruction to switch off the This also allows the accessories to be used (for engine, press the "START/STOP" button for example: audio system, lighting, etc.). about three seconds. In the event of a fault with the electronic key, 6 F Press the "START/STOP" button, the F Place and hold the remote control against contact a CITROËN dealer or a qualified instrument panel comes on but the engine the reader. workshop. does not start. F With a manual gearbox, place the gear F Press the button again to switch off the lever in neutral, then fully depress the clutch ignition and allow the vehicle to be locked. pedal. Emergency switch-off F With an automatic gearbox, select In the event of an emergency only, the mode P, then fully depress the brake pedal. engine can be switched off without With the ignition on, the system F With an electronic gearbox, select conditions (even when driving). automatically goes into energy economy mode N, then fully depress the brake pedal. Press the "START/STOP" button for about mode to maintain an adequate state of three seconds. charge in the battery. F Press the "START/STOP" button. The engine starts. In this case, the steering column locks as soon as the vehicle stops. 99 Driving

When the vehicle is being driven, Parking brake if this warning lamp and the 6-speed manual gearbox Applying STOP warning lamp come on, Engaging 5th or 6th gear accompanied by an audible signal and a message on the screen, this F Move the lever fully to the right to engage 5th indicates that the parking brake or 6th gear. is still on or has not been fully released.

5-speed manual gearbox Failure to follow this advice could cause permanent damage to the gearbox (inadvertent engagement of 3rd or 4th F Pull the parking brake lever up to immobilise Engaging reverse gear gear). your vehicle.

When parking on a slope, turn the wheels against the kerb, apply the parking brake, Engaging reverse gear engage a gear and switch off the ignition.

F Fully depress the clutch pedal. Releasing F Move the gear lever fully to the right, then pull it back.

Only engage reverse gear when the vehicle is stationary with the engine at idle.

F Raise the ring under the knob and move the As a safety precaution and to facilitate gear lever to the left, then forwards. starting the engine: F Pull the parking brake lever up gently, press - always select neutral, the release button then lower the lever fully. - press the clutch pedal. Only engage reverse gear when the vehicle is stationary with the engine at idle.

100 Driving

3. Gear selector positions graphic. As a safety precaution and to facilitate Displays in the instrument panel starting the engine: - always select neutral, - press the clutch pedal. Gear selector positions

Automatic gearbox (EAT6)

Six-speed automatic gearbox which offers a choice between the comfort of fully automatic operation, enhanced by a sport programme, or When you move the selector to select a manual gear changing. position, the corresponding indicator is Two driving modes are available: displayed in the instrument panel. - automatic operation with electronic P. Parking. P. Parking. management of the gears by the gearbox, - Immobilisation of the vehicle, parking brake R. Reverse. with a sport programme for a more dynamic on or off. driving style, - Starting the engine. N. Neutral. - manual operation for sequential changing R. Reverse. D. Drive (automatic driving). of the gears by the driver. - Reversing manoeuvres, vehicle stationary, S. Sport programme. engine at idle. Gears engaged during manual 6 1 2 3 4 5 6. N. Neutral. operation - Immobilisation of the vehicle, parking brake -. Invalid value during manual on. operation. - Starting the engine. D. Automatic operation. M +/-. Manual operation with sequential Foot on brake changing of the six gears. F Press the brake pedal when F Pull back to change up a gear. this indicator lamp is displayed or on the instrument panel (e.g. F Push forwards to change down a gear. starting the engine). 1. Gear selector. 2. "S" (sport) button. 101 Driving

If you release the accelerator sharply, the Starting the vehicle When the engine is running at idle, with gearbox will not change to a higher gear for the brakes released, if position R, D or F Apply the parking brake. safety reasons. M is selected, the vehicle moves even F Select position P or N. without the accelerator being pressed. F Start the engine. Do not leave children unsupervised inside If these conditions are not met, there is an the vehicle when the engine is running. Never select position N while the vehicle audible signal, accompanied by the display of a When carrying out maintenance with the is moving. warning message. engine running, apply the parking brake Never select position P or R unless the F With the engine running, press the brake and select position P. vehicle is completely stationary. pedal. F Release the parking brake. F Select position R, D or M. F Gradually release the brake pedal. The vehicle moves off immediately. Sport programme "S" Automatic operation F Press button S, after starting the engine. F Select position D for automatic changing of The gearbox automatically favours a dynamic If position N is selected inadvertently while the six gears. style of driving. driving, allow the engine to return to idle, The gearbox then operates in auto-adaptive S appears in the instrument panel. then select position D to accelerate. mode, without any action needed from the If the temperature is below -23°C, the driver. It continuously selects the most suitable engine should be left at idle for four gear according to the style of driving, the profile Return to standard minutes, to ensure the correct operation of the road and the load in the vehicle. automatic operation and longevity of the engine and gearbox. For maximum acceleration without touching the selector, press the accelerator pedal down F At any time, press the selected button again fully (kick down). The gearbox changes down to quit the programme engaged and return automatically or maintains the gear selected to auto-adaptive mode. until the maximum engine speed is reached. On braking, the gearbox changes down automatically to provide efficient engine Manual operation braking. F Select position M for sequential changing of the six gears.

102 Driving F Move the selector towards the + sign to Stopping the vehicle Do not exceed 62 mph (100 km/h), local speed change up a gear. restrictions permitting. F Move the selector towards the - sign to Before switching off the engine, you can Contact a CITROËN dealer or a qualified change down a gear. engage position P or N to place the gearbox in workshop as soon as possible. It is only possible to change from one gear to neutral. In both cases, apply the parking brake to another if the vehicle speed and engine speed There is a risk of damage to the gearbox: immobilise the vehicle. permit; otherwise, the gearbox will operate - if you press the accelerator and brake temporarily in automatic mode. pedals at the same time, If the selector is not in position P, when the - if you force the movement of the D disappears, and the gears engaged appear driver's door is opened or approximately selector from position P to another in succession on the instrument panel. 45 seconds after the ignition is switched position when the battery is flat. If the engine speed is too low or too high, the off, a warning message appears in the selected gear flashes for a few seconds, then screen. the actual gear engaged is displayed. F Return the selector to position P; the It is possible to change from position D message disappears. To reduce fuel consumption when at (automatic) to position M (manual) at any time. When driving on flooded roads or when a prolonged standstill with the engine When the vehicle is stationary or moving crossing a ford, proceed at walking pace. running (traffic jam, etc.), put the very slowly, the gearbox engages first gear selector in position N and apply the automatically. parking brake. The sport programme is inactive in manual operation. Malfunction If your vehicle has an automatic gearbox, 6 never try to start the engine by pushing When the ignition is on, the lighting the vehicle. of this warning lamp, associated with an audible signal and an alert Invalid value during manual message on the screen, indicates a operation Electronic gearbox gearbox fault. (ETG6) This symbol is displayed if a gear is not engaged correctly (selector In this case, the gearbox switches to back-up Six-speed electronic gearbox offering between two positions). mode and is locked in 3rd gear. You may feel a automatic gear control, without driver substantial jolt when changing from P to R and intervention. from N to R. This will not cause any damage to You can temporarily take control of gear the gearbox. changes at any time, using the steering mounted control paddles. 103 Driving Control panel F Operate the right-hand control Starting the vehicle under the steering wheel to change up. F Switch on the ignition. F Select neutral (control N). F Operate the left-hand control The indicator lamp in the control comes on. under the steering wheel to F Fully depress the brake pedal. change down. F Start the engine.

You cannot use the steering mounted You must press the brake pedal when control paddles to select neutral or to starting the engine. N Neutral: with your foot on the brake, press engage or disengage reverse gear. The "Foot on brake" warning lamp and the this control to put the gearbox into neutral associated control panel indicator lamp and for starting the engine. flash if the brake pedal is not pressed D Drive: press this control to engage forward when starting the engine. drive with automatic operation of the Displays in the instrument Press more firmly on the brake pedal. gears. panel R Reverse: with your foot on the brake, press this control to engage reverse. N appears in the instrument panel.

N flashes in the instrument panel, Steering mounted control accompanied by an audible signal and a paddles message, if the control N is not activated on starting. Press control N to select neutral. N Neutral. D and 1 2 3 Drive (forward) and the gear 4 5 6 engaged. F Select forward drive (control D) or reverse R Reverse. (control R). The associated indicator lamp comes on in F Place your foot on the brake the control panel. when this warning lamp flashes. D and 1 or R appear in the instrument panel.

104 Driving

F Release the parking brake. The gearbox then operates in auto-active Temporary control of gear F Progressively release the brake pedal. mode, without any intervention on the part changing The vehicle moves off immediately. of the driver. It continuously selects the most suitable gear according to the following parameters: - fuel consumption optimisation, Creep function - driving style, This function facilitates manoeuvring of the - road conditions, vehicle at low speed (when parking, in traffic - vehicle load. jams, etc.). After pressing control D or R, the vehicle For optimum acceleration, when moves as soon as you take your foot off the overtaking another vehicle for example, brake pedal, at low speed and with the engine fully depress the accelerator pedal, at idle. beyond the point of resistance. You can temporarily take over control of gear changes using the steering mounted + and - control paddles: if the engine speed allows, the gear change is carried out. Never select neutral (position N) when This function allows you to anticipate certain Never leave children unattended in the moving. situations, such as overtaking another vehicle vehicle when the engine is running. or approaching a bend in the road. After a few moments with no action on the 6 Do not press the brake and accelerator control paddles, the gearbox returns to pedals at the same time: this could cause automatic operation. The creep function may be temporarily very rapid wear of the clutch. unavailable if the clutch temperature is too high or the slope too steep. Reverse gear To engage reverse gear, the vehicle must be Forward drive stationary with your foot on the brake pedal. F Press control R. F Press control D. The indicator lamp in the control comes on. The indicator lamp in the control comes on. D and the gear engaged appear in the instrument panel. 105 Driving

Gear efficiency recommendations are for There is an audible signal upon Before doing anything under the bonnet, information only. In fact, the road layout, the engagement of reverse. ensure that control N has been pressed traffic density and safety remain the deciding and that the parking brake is applied. factors when choosing the best gear. The driver If reverse gear is requested when moving, the therefore remains responsible for deciding warning lamp N flashes and the gearbox goes whether or not to follow the indications issued into neutral automatically. by the system. To engage reverse, stop the vehicle then, with Operating fault This function cannot be disabled. your foot on the brake pedal, press control N, then R. With the ignition on, illumination of this warning lamp, accompanied by The system is only active on vehicles fitted Stopping the vehicle an audible signal and a message, with a manual gearbox. indicates a gearbox fault. Before switching off the engine, you can: - press control N to be in neutral, Have it checked by a CITROËN dealer or a On certain BlueHDi Diesel versions with or qualified workshop. manual gearbox, in certain driving conditions - leave the vehicle in gear; in this case the the system may suggest changing into neutral vehicle cannot be moved. so that the engine can go into standby (STOP Gear efficiency indicator mode with Stop & Start). In this case, N is displayed in the instrument panel. This system helps reduce fuel consumption by For all parking situations, you must apply recommending the most appropriate gear. Example: the parking brake to immobilise the - You are in third gear. vehicle. - You press the accelerator pedal. Operation - The system may suggest that you engage a higher gear. Depending on the driving situation and your When immobilising the vehicle with the vehicle's equipment, the system may advise engine running, you must select neutral N. you to skip one (or more) gear(s). You can follow this instruction without engaging the intermediate gears.

The information appears in the instrument panel in the form of an arrow. 106 Driving

The system adapts its gear change Do not leave the vehicle while it is being recommendation according to the held temporarily in the hill start assist driving conditions (slope, load, etc.) phase. and the demands of the driver (power, If you need to leave the vehicle with the acceleration, braking, etc.). engine running, apply the parking brake The system never suggests: manually then ensure that the parking - engaging first gear, brake warning lamp is showing fixed on - engaging reverse gear. the instrument panel. - engaging a lower gear. On a descending slope, with the vehicle stationary and reverse gear engaged, the vehicle is held for a short time when you release the brake pedal. On vehicle fitted with a manual gearbox, the arrow may be accompanied by the gear recommended. Operating fault

Hill start assist On an ascending slope, with the vehicle If a fault in the system occurs, this warning stationary, the vehicle is held for a short System which keeps your vehicle stationary lamp comes on accompanied by a message. time when you release the brake pedal. 6 for a short time (approximately two seconds) Contact a CITROËN dealer or a qualified With a manual gearbox, if you are in first gear when starting on a gradient, the time it takes workshop to have the system checked. to move your foot from the brake pedal to the or in neutral. accelerator pedal. With an automatic gearbox, if you are in D It is only active when: or M. Stop & Start - the vehicle is completely stationary, with With an electronic gearbox, if you are in D. The Stop & Start system puts the engine your foot on the brake pedal, temporarily into standby – STOP mode – during - certain conditions of gradient are met, stops in traffic (red lights, traffic jams, etc.). The - the driver's door is closed. engine restarts automatically – START mode – The hill start assist system cannot be as soon as you want to move off. deactivated. The restart takes place instantly, quickly and silently.

107 Driving

Perfect for urban use, the Stop & Start system If your vehicle is fitted with this system, a time - demisting is active, reduces fuel consumption and exhaust counter calculates the sum of the periods in - some special conditions (battery charge, emissions as well as the noise level when STOP mode during a journey. engine temperature, braking assistance, stationary. It resets to zero every time the ignition is exterior temperature, etc.) where the engine switched on. is needed to control the system.

Going into engine STOP For your comfort, during parking mode manoeuvres, STOP mode is not available In this case, this indicator lamp for a few seconds after coming out of flashes for a few seconds then goes This indicator lamp comes on in the reverse gear. off. instrument panel and the engine The Stop & Start system does not affect goes into standby automatically. the functionality of the vehicle, such as for This operation is perfectly normal. - With a manual gearbox, at speeds below example, braking, power steering, etc. 2 mph (3 km/h) or with the vehicle stationary (depending on version), when you place the gear lever in neutral and release the clutch Going into engine START pedal, Never refuel with the engine in STOP mode - With an automatic gearbox, at speeds mode; you must switch off the ignition with This indicator lamp goes off and the below 2 mph (3 km/h), or when the vehicle the "START/STOP" button. engine starts automatically: is stationary (depending on version), when you press the brake pedal or place the gear - With a manual gearbox, when you fully selector into position N. depress the clutch pedal. - With an electronic gearbox, at speeds Special cases: STOP mode not - With an automatic gearbox: below 2 mph (3 km/h), or when the vehicle available • gear selector in position D or M, when is stationary (depending on version), when you release the brake pedal, STOP mode is not activated when: you press the brake pedal or place the gear • or gear selector in position N and brake - the vehicle is on a steep slope (uphill or selector into position N. pedal released, when you place the gear downhill), selector in position D or M, - the driver's door is open, • or when you engage reverse gear. - the driver's seat belt is not fastened, - the vehicle has not exceeded 6 mph (10 Time counter of the Stop & Start. km/h) since the last engine start, (minutes/seconds or hours/minutes) - the engine is needed to maintain a comfortable temperature in the passenger compartment, 108 Driving

- With an electronic gearbox: Deactivation/Reactivation Driving on flooded roads • gear selector in position D, when you Before driving in a flooded area, it is release the brake pedal, In certain circumstances, such as the need strongly recommended that you deactivate • or gear selector in position N and brake to maintain the temperature in the passenger the Stop & Start system. pedal released, when you place the gear compartment, it may be useful to deactivate the For more information on Driving selector in position D, Stop & Start system. recommendations, particularly on • or when you engage reverse gear. The system can be deactivated at any time, flooded roads, refer to the corresponding once the ignition is switched on. section. If the engine is in STOP mode, it then restarts. The Stop & Start system is reactivated automatically every time the ignition is switched Special cases: START activated on. automatically Operating fault F As a safety measure or to maintain comfort In the Driving/Vehicle menu of the touch screen, select the In the event of a fault with the levels in the vehicle, START mode is activated system, this warning lamp flashes in "Driving functions" tab, then automatically when: the instrument panel. - you open the driver's door, "Stop & Start". - the driver's seat belt is not fastened, Have it checked by a CITROËN dealer or a - the speed of the vehicle exceeds 7 mph qualified workshop. (11 km/h) with an electronic gearbox, Opening the bonnet In the event of a fault in STOP mode, the - some special conditions (battery charge, 6 Before doing anything under the bonnet, vehicle may stall. engine temperature, braking assistance, deactivate the Stop & Start system to All of the instrument panel warning lamps come exterior temperature, etc.) where the engine avoid any risk of injury resulting from an on. is needed to control the system or the automatic change to START mode. It is then necessary to switch off the ignition, vehicle. then restart the engine.

In this case, this indicator lamp Depending on the version, an alert flashes for a few seconds, then goes message may also be displayed, asking off. you to change to neutral (N) and to press the brake pedal. This operation is perfectly normal. You must switch off the ignition, then start the engine again.

109 Driving

The Stop & Start system requires a You should update your navigation Automatic reading of road signs is a 12 V battery of specific technology and mapping regularly in order to receive driving assistance system and does not specification. accurate speed limit information from the always display speed limits correctly. All work on this type of battery must be system. The speed limit signs present on the road carried out only by a CITROËN dealer or a always take priority over the display by the qualified workshop. system. Specific speed limits, such as those for heavy For more information on the , The system cannot in any circumstances 12 V battery goods vehicles, are not displayed. refer to the corresponding section. replace the need for vigilance on the part The display of the speed limit in the instrument of the driver. panel is updated as you pass a speed limit sign The driver must observe the driving intended for cars (light vehicles). regulations and must adapt the speed of the vehicle to suit the weather and traffic. It is possible for the system to not display Recognition of the speed limit if it does not detect a The units for the speed limits (km/h or speed limit sign within a preset period. speed limit signs and mph) depend on the country in which you The system is designed to detect signs are driving. recommendation that conform to the Vienna Convention on This should be taken into account in order road signs. to observe the speed limit. For the system to operate correctly when you change country, the units for speed in the instrument panel must be set to those for the country in which you are driving. To maintain correct operation of the system: regularly clean the area in front of the camera. This system allows the speed limit detected by The internal surface of the windscreen can the camera to be displayed in the instrument also become misted around the camera. panel. In humid and cold weather, demist the The system also processes speed limit details windscreen regularly. from the navigation system mapping.

110 Driving Display in the instrument panel Operating limits The legislation on speed limits is specific to each country. The system does not take account of reduced speed limits in the following cases: - poor weather (rain, snow), - atmospheric pollution, On detection of speed limit information, the - trailer, caravan, system displays the value. - driving with a space-saver type spare wheel or snow chains fitted, - puncture repair using the temporary repair kit, 1. Speed limit indication. - young drivers, etc.

Display of the speed The following situations may interfere with the operation of the system or prevent it working: The driver can adjust the vehicle's speed - poor visibility (inadequate street lighting, according to the information given by the falling snow, rain, fog), system. - windscreen area located in front of the 6 camera dirty, misted, frost-covered, snow- covered, damaged or covered by a sticker, Activation/Deactivation - fault with the camera, - obsolete or incorrect mapping, The system is activated or deactivated via the - hidden road signs (other vehicles, The system is active but is not detecting speed vehicle configuration menu. vegetation, snow), limit information. - speed limit signs that do not conform to the F In the Driving/Vehicle menu standard, are damaged or distorted. of the touch screen, select the "Vehicle settings" tab then "Safety" and activate/deactivate "Recommended speed display".

111 Driving Memorising the speed Steering mounted controls Memorising the speed setting This memorisation is in addition to the display of Recognition of speed limit signs. F Switch on the speed limiter/cruise control. Speed limiter/cruise control information is displayed.

The driver can choose to change the speed setting to the suggested speed limit, by 1. Select speed limiter/cruise control mode. pressing the memorisation button for the speed 2. Memorise a speed setting. limiter or cruise control twice. This speed setting then replaces the previous speed setting for the speed limiter and/or cruise Displays in the instrument panel On detection of a speed limit sign, the system control. displays the speed limit and a message offering to make it a new speed setting. For more information on the Speed "MEM" flashes in the screen for a few seconds. limiter or the Cruise control, refer to the corresponding sections.

If there is a difference of less than 6 mph (10 km/h) between the speed setting and the speed displayed by the recognition system, the MEM symbol is not displayed. 3. Speed limit indication. 4. Memorise the speed. F Press the "MEM" button 2 once to request 5. Current speed of the vehicle. the recommended speed to be saved. 6. Current speed setting. A message asks you to confirm the request with a second press.

112 Driving F Press the "MEM" button 2 again to confirm Steering mounted controls 6. Speed limiter On/Pause indication. and save the new speed setting. 7. Programmed speed setting value. 8. Speed limiter mode selected.

Switching on

F Turn the wheel 1 to the LIMIT position to select the speed limiter; the function is 1. Select speed limiter mode. paused. Speed limiter F If the speed setting is suitable (last speed 2. Decrease the programmed speed setting. setting programmed in the system) press The system prevents the vehicle 3. Increase the programmed speed setting. button to switch the speed limiter on. from exceeding the speed setting 4 4. Speed limiter On/Pause. F Pressing button 4 temporarily interrupts the programmed by the driver. 5. Use the speed suggested by the speed function (pause). limit recognition system. The speed limiter is switched on For more information on Recognition of manually. speed limit signs, refer to the corresponding The minimum programmed speed is section. 19 mph (30 km/h). Adjusting the limit speed 6 The programmed speed remains in the setting system memory when the ignition is Displays in the instrument switched off. panel You do not have to switch the speed limiter on in order to set the speed. The speed limiter is a driving aid only. It does not exempt the driver from the Select the speed limiter mode (wheel 1 in LIMIT need to observe speed limits or to remain position). vigilant at all times. To modify the limit speed setting: F in steps of +/- 1 mph (km/h), make successive short presses on button 2 or 3, F continuously, in steps of +/- 5 mph (km/h), press and hold button 2 or 3. 113 Driving

To modify the speed limiter setting using Once the vehicle slows down to the the speed suggested by the speed limit sign programmed setting, the speed limiter is active Cruise control recognition system: again: the speed setting display is fixed once System which automatically F the speed suggested is displayed in the more. maintains the speed of the vehicle instrument panel, at the value programmed by the F make a first press on button 5; a message Switching off driver, without any action on the is displayed to confirm the memorisation accelerator pedal. F Turn the wheel 1 to the position 0: the request, display of information about the speed F press button 5 again to save the suggested The cruise control is switched on limiter disappears. speed. manually. The speed displays immediately in the It requires a minimum vehicle speed of instrument panel as the new speed setting. 25 mph (40 km/h) as well as: Operating fault - with a manual gearbox, the engagement of third or fourth gear or Flashing dashes indicate a fault with the speed Temporarily exceeding the higher, limiter. speed setting - with a automatic or electronic gearbox, Have it checked by a CITROËN dealer or a the engagement of second gear or F Press firmly on the accelerator pedal, qualified workshop. going beyond the point of resistance, to higher. exceed the programmed speed limit. The function remains active after changing The speed limiter is deactivated temporarily gear on vehicles fitted with an automatic and the displayed programmed speed flashes. gearbox.

On a steep descent or in the event of The cruise control is paused manually or by pressing the brake or clutch pedal or if the ESC sharp acceleration, the speed limiter will The use of mats not approved by system is invoked for safety reasons. not be able to prevent the vehicle from CITROËN may interfere with the operation Once switched on, you can pause the cruise exceeding the programmed speed. of the speed limiter. control at any time by pressing button 4: the To avoid any risk of jamming of the pedals: screen confirms the pause. When the limit speed is exceeded but this is not - ensure that the mat is positioned due to action by the driver, there is an audible correctly, signal to supplement the visual alert (setting - do not fit one mat on top of another. flashes). Switching off the ignition cancels any programmed speed setting. 114 Driving

F Pressing button 4 again restores operation The cruise control system is a driving aid Displays in the instrument of the cruise control (ON). that cannot, in any circumstances, replace panel the need to observe speed limits, nor the need for vigilance on the part of the driver. Modifying the cruise speed As a safety measure, you are advised to setting keep your feet near the pedals at all times. The cruise control must be active.

Steering mounted controls As a precaution, it is recommended that the cruise speed chosen be close to the current speed of your vehicle, so 6. Cruise control pause/resume indication. as to avoid any sudden acceleration or 7. Programmed speed setting value. deceleration of the vehicle. 8. Cruise control selection indication. To modify the cruise speed setting from the current speed of the vehicle: F in steps of +/- 1 mph (km/h), make repeated short presses on button 2 or 3, F 1. Select cruise control mode. Switching on continuously, in increments of +/- 5 mph (km/h), press and hold button 2 or 3. 6 2. Set the current speed of the vehicle as the F Turn the wheel 1 to the CRUISE position to cruise setting or lower the cruise setting. select cruise control mode; the function is Take care: pressing and holding button 3. Set the current speed of the vehicle as the paused. 2 cruise setting or raise the cruise setting. or 3 results in a rapid change in the speed F To start the cruise control and set a cruise of your vehicle. 4. Cruise control Pause/Resume. speed, once the vehicle has reached the 5. Use the speed suggested by the speed desired speed, press button 2 or 3: the limit recognition system. current speed of your vehicle becomes the cruise speed setting. To modify the cruise speed setting using For more information on Recognition of You can release the accelerator pedal. the speed suggested by the speed limit sign speed limit signs, refer to the corresponding recognition system: F Pressing button 4 interrupts operation of the section. F the speed suggested is displayed in the system (pause). instrument panel,

115 Driving

F make a first press on button 5; a message To activate the system again, with the speed Use the cruise control only where the is displayed to confirm the memorisation of the vehicle above 25 mph (40 km/h), press driving conditions allow running at a request, button 4. constant speed and at an adequate safe F press button 5 again to save the suggested distance. speed. Do not activate the cruise control in urban The speed displays immediately in the Switching off areas, in heavy traffic, on winding or steep instrument panel as the new speed setting. F Turn wheel 1 to position 0: the cruise control roads, on slippery or flooded roads, or in information disappears from the screen. conditions of poor visibility (heavy rain, Temporarily exceeding the fog, falling snow, etc.). speed setting In some circumstances, it may not be possible to maintain or reach the cruise If needed (for overtaking, etc.), it is possible to speed set: towing, vehicle heavily loaded, exceed the programmed speed by pressing the Operating fault steep climb. accelerator pedal. The cruise control is temporarily overridden and the programmed speed setting flashes.

To return to the speed setting, release the accelerator pedal. Once the vehicle has returned to the The use of mats not approved by programmed speed, the cruise control takes CITROËN may interfere with the operation over again: the display of the programmed Flashing dashes indicate a fault with the cruise of the cruise control. speed setting becomes steady again. control system. To avoid any risk of jamming of the pedals: Have it checked by a CITROËN dealer or a - ensure that the mat is positioned qualified workshop. correctly, When descending a steep hill, the cruise - do not fit one mat on top of another. control system cannot prevent the vehicle from exceeding the programmed speed.

You may have to brake to control the speed of your vehicle. In this case, the cruise control is automatically paused.

116 Driving Collision Risk Alert and Operating limits Active Safety Brake In the following cases, deactivating the system via the vehicle's configuration menu is recommended: The system is activated from 3 mph (5 km/h). - when towing a trailer, It takes account of: - when carrying long objects on roof bars or a This system is a driving aid that includes three - registered vehicles running in the same roof rack, functions. direction or stationary, - before using an automatic car wash, with Collision Risk Alert: it warns the driver if their - pedestrians in the traffic lane (bicycles, the engine running, vehicle is at risk of collision with the vehicle in motorcycles, animals and objects on the - before placing the vehicle on a rolling stand front or a pedestrian present in their traffic lane. road are not necessarily detected). in a workshop, Intelligent emergency braking assistance: - when the vehicle is being towed, with the it supplements the braking action taken by the engine running, driver if this is inadequate. - when a "space-saver" type spare wheel is This system is designed to assist the Active Safety Brake: it intervenes following fitted (depending on version), driver and improve road safety. the alert if the driver does not react quickly - following impact damage to the windscreen It is the driver's responsibility to enough and does not operate the vehicle's close to the detection camera, continuously monitor the state of the brakes. - if the brake lamps are not working. traffic, observing the driving regulations. If the driver fails to act, it contributes This system does not avoid the need for towards avoiding a collision or limiting 6 vigilance on the part of the driver. its severity by reducing the speed of your vehicle. It is possible that warnings are not given, are given too late or seem unjustified. Consequently, always stay alert and be As soon as the system detects a potential prepared to react at any time to avoid an obstacle, it prepares the braking circuit in Activation and operating accident. conditions case automatic braking is needed. This may cause a slight noise and a slight The vehicle has a camera located at the top of sensation of deceleration. the windscreen.

117 Driving

Collision Risk Alert Where the speed of your vehicle is too Intelligent emergency Depending on the degree of risk of collision high approaching another vehicle, the first braking assistance detected by the system and the alert threshold level of alert may not be displayed: the If the driver brakes, but not sufficiently to avoid chosen by the driver, different levels of level 2 alert may be displayed directly. a collision, this system will supplement the alert can be triggered and displayed in the Important: alert level 1 is never displayed braking, within the limits of the laws of physics. instrument panel. when the "Close" trigger threshold has This assistance will only be provided if you been selected. Level 1 (orange): visual alert only, press the brake pedal. signalling to you that the vehicle in front is very close. The message "Vehicle close" is displayed. Modifying the alert trigger Active Safety Brake threshold This level of alert is based on the inter-vehicle This threshold determines how you wish time between your vehicle and the vehicle in to be alerted of the presence of a moving front. or stationary vehicle in front of you, or a Level 2 (red): visual and audible pedestrian present in your traffic lane. alert, warning you that a collision is The current threshold can be modified via the imminent. vehicle configuration menu. The message "Brake!" is displayed. You can select one of three predefined thresholds: This level of alert is based on the time before - "Distant", collision. It takes account of the vehicle - "Normal", dynamics, the speed of your vehicle and the - "Close". one in front, the environmental conditions, the The last threshold selected is kept in the operation of the vehicle (cornering, pedals memory when the ignition is switched off. pressed, etc.) to trigger the alert at the best moment. This function, also called automatic emergency braking, aims to reduce the speed of impact or avoid a frontal collision with your vehicle where the driver fails to react.

118 Driving

Using the camera, this function acts on the vehicle's braking system. With a manual gearbox, in the event of Deactivation/Activation automatic emergency braking until the By default, the system is automatically If the camera has confirmed vehicle comes to a complete stop, the activated at every engine start-up. the presence of a vehicle or a engine may stall. Deactivation of the system is pedestrian, this warning lamp With an automatic or electronic gearbox, signalled by the illumination of this flashes once the function is acting in the event of automatic emergency indicator lamp, accompanied by the on the vehicle's brakes. braking until the vehicle comes to a display of a message. complete stop, keep the brake pedal Important: if operation of the F In the Driving/Vehicle menu pressed down to prevent the vehicle from automatic emergency braking is of the touch screen, select the starting off again. triggered, you should take back "Vehicle settings" tab then control of your vehicle and brake "Safety" and activate/deactivate with the pedal to add to or finish the "Collision risk and auto automatic braking action. Specific conditions for operation braking". The vehicle's speed must be between 3 mph The driver can take back control of the vehicle and 53 mph (5 km/h and 85 km/h) when a The camera may be disrupted or not work at any time by sharply turning the steering moving vehicle is detected. in the following situations: wheel and/or pressing the accelerator pedal. The vehicle's speed must not exceed 50 mph - poor visibility (inadequate street (80 km/h) when a stopped vehicle is detected. lighting, falling snow, heavy rain, dense The vehicle's speed must not exceed 37 mph fog, etc.), (60 km/h) when a pedestrian is detected. - dazzle (headlamps of an oncoming 6 The point at which braking is triggered The ESC system must not be faulty. vehicle, low sun, reflections on a damp may be adjusted depending on the driving The ASR system must not be deactivated. road, leaving a tunnel, alternating actions of the driver, such as movement All passenger seat belts must be fastened. shade and light, etc.), of the steering wheel or actions on the Sporty driving or driving on winding roads may - camera obstructed (mud, frost, snow, accelerator pedal. impede the function. condensation, etc.). On versions with camera alone, this Operation of the function may be felt by message indicates to you that the camera slight vibration in the brake pedal. After an impact, the function automatically is obstructed: "Driving aids camera: If the vehicle comes to a complete stop, stops operating. Consult a CITROËN visibility limited, see user guide". the automatic braking is maintained for 1 dealer or a qualified workshop to have the In these situations, detection performance to 2 seconds. system checked. may be reduced.

119 Driving

Clean the windscreen regularly, Fatigue detection system particularly the area in front of the camera. Take a break as soon as you feel tired or at The internal surface of the windscreen can least every two hours. also become misted around the camera. The function has the "Driving time warning" In humid and cold weather, demist the combined with the "Driver inattention alert". windscreen regularly. This alert is issued via the display of a Do not allow snow to accumulate on the message encouraging you to take a break, bonnet or roof of the vehicle as this could accompanied by an audible signal. conceal the detection camera. The system cannot in any circumstances If the driver does not follow this advice, the replace the need for vigilance on the part alert is repeated hourly until the vehicle is of the driver. stopped. Do not take the wheel if you are tired.

The system is automatically deactivated The system resets itself if one of the following after the use of the "space-saver" type Activation/Deactivation conditions is met: spare wheel is detected, or if a fault with - engine running, the vehicle has been The system is activated or deactivated via the the side brake lamps is detected. stationary for more than fifteen minutes, vehicle configuration menu. - the ignition has been switched off for a few minutes, F In the Driving/Vehicle menu - the driver's seat belt is unfastened and their of the touch screen, select the door is open. Malfunction "Vehicle settings" tab then In the event of a fault with the "Safety" and activate/deactivate As soon as the vehicle's speed drops system, you are alerted by the "Fatigue detection". below 40 mph (65 km/h), the system goes illumination of this warning lamp, into standby. accompanied by the display of a Driving time monitoring resumes when the message and an audible signal. vehicle travels at above 40 mph (65 km/h). Contact a CITROËN dealer or a qualified Driving time warning workshop to have the system checked. The system triggers an alert once it detects that the driver has not taken a break after two hours of driving at a speed above 40 mph (65 km/h).

120 Driving

The driver is then alerted by the message Driver inattention alert The following situations may interfere with "Take care!", accompanied by an audible the operation of the system or prevent it signal. working: After three first level alerts, the system triggers - poor visibility (inadequate lighting of a new alert with the message "Take a break!", the roadway, falling snow, heavy rain, accompanied by a more pronounced audible dense fog, etc.), signal. - dazzle (headlamps of an oncoming vehicle, low sun, reflections on a damp In certain driving conditions (poor road road, leaving a tunnel, alternating surface or strong winds), the system may shade and light, etc.), give alerts independent of the driver's - windscreen area located in front of the level of vigilance. camera: dirty, misted up, frost-covered, snow-covered, damaged or covered by Using a camera placed at the top a sticker, of the windscreen, the system - lane markings absent, worn, hidden assesses the driver's level of (snow, mud) or multiple (roadworks, vigilance by identifying variations etc.), in trajectory compared to the lane - close to the vehicle ahead (lane markings. markings not detected), - roads that are narrow, winding, etc. This system is particularly suited to fast roads 6 (speed higher than 40 mph (65 km/h)).

When the system interprets the behaviour of the vehicle as indicating a certain fatigue or inattention threshold on the part of the driver, it triggers the first level of alert.

121 Driving

Have the system checked by a CITROËN Clean the windscreen regularly, This system is a driving aid that cannot, in dealer or a qualified workshop. particularly the area in front of the camera. any circumstances, replace the need for The internal surface of the windscreen can vigilance on the part of the driver. also become misted around the camera. The detection may be impeded: In humid and cold weather, demist the - if the markings on the ground are worn, windscreen regularly. Activation/Deactivation - if there is little contrast between the Do not allow snow to accumulate on the The system is activated and deactivated in the markings on the road and the road bonnet or roof of the vehicle as this could vehicle configuration menu. surface, conceal the detection camera. F In the Driving/Vehicle menu - if the windscreen is dirty, of the touch screen, select the - in certain weather conditions: fog, "Vehicle settings" tab then heavy rain, snow, shade, bright "Safety" and activate/deactivate sunlight or direct exposure to the sun "Lane departure warning (low sun, leaving a tunnel, etc.). Lane Departure Warning system". System Detection System which, using a camera which You are alerted by the flashing of recognises solid or broken lines, detects the Clean the windscreen regularly, this warning lamp in the instrument particularly the area in front of the camera. involuntary crossing of longitudinal traffic lane panel, accompanied by an audible markings on the ground. signal. The internal surface of the windscreen can The camera analyses the image then, if the also become misted around the camera. driver's attention drops and the speed is higher No warning is transmitted while a direction In humid and cold weather, demist the than 37 mph (60 km/h), triggers a warning if indicator is active. windscreen regularly. there is an unexpected change of direction. Do not allow snow to accumulate on the This system is particularly useful on motorways bonnet or roof of the vehicle as this could and main roads. Operating fault conceal the detection camera.

The flashing and then constant illumination of the warning lamp, accompanied by illumination of the Service warning lamp indicates a fault in the system. 122 Driving

Blind spot monitoring This driving aid system is designed to The system is automatically deactivated improve safety when driving and is in no when towing with a towing device circumstances a substitute for the use approved by CITROËN. of the interior rear view mirror and door mirrors. It is the driver's responsibility to constantly check the traffic, to assess the distances and relative speeds of other Operation vehicles and to predict their movements The alert is given by a warning lamp which before deciding whether to change lane. comes on in the door mirror on the side in This system is a driving aid that cannot, in question as soon as a vehicle – car, lorry, any circumstances, replace the need for bicycle – is detected. This system warns the driver of the presence of vigilance on the part of the driver. The following conditions must be met for this: another vehicle in the blind spot angle of their - all vehicles are moving in the same direction vehicle (areas hidden from the driver's field and in adjacent lanes, of vision), as soon as this presents a potential - the speed of your vehicle must be between danger. Activation/Deactivation 7 and 87 mph (12 and 140 km/h), - you overtake a vehicle with a speed Activation and deactivation of the system is difference of less than 6 mph (10 km/h), done in the vehicle configuration menu. - a vehicle overtakes you with a speed difference of less than 16 mph (25 km/h), F In the Driving/Vehicle menu 6 - traffic is flowing normally, of the touch screen, select the - when overtaking a vehicle over a certain "Vehicle settings" tab then period of time and the vehicle being "Safety" and activate/deactivate overtaken remains in the blind spot, "Blind spot sensors". A warning lamp appears in the door mirror on - you are driving on a straight or slightly the side in question: curved road, - immediately, when being overtaken, Sensors fitted in the front and rear bumpers - your vehicle is not pulling a trailer, a - after a delay of about one second, when monitor the blind spots. caravan, etc. overtaking a vehicle slowly. The status of the system remains in memory when the ignition is switched off.

123 Driving

The system may suffer temporary interference in certain weather conditions (rain, hail, etc.). In particular, driving on a wet surface or moving from a dry area to a wet area can cause false alerts (for example, the presence of a fog of water droplets in the blind spot angle is interpreted as a vehicle). In bad weather or in winter, ensure that the sensors are not covered with mud, ice or snow. No alert will be given in the following situations: Take care not to cover the warning zone in - in the presence of non-moving objects the door mirrors or the detection zones on (parked vehicles, barriers, street lamps, - when overtaking or being overtaken by a the front and rear bumpers with adhesive road signs, etc.), very long vehicle (lorry, bus, etc.) that is labels or other objects; they may hamper - oncoming traffic, detected in the rear blind spot but is also the correct operation of the system. - driving on a winding road or a sharp corner, present in the driver's front field of vision, - when overtaking quickly, - in very heavy traffic: vehicles detected in front and behind are confused with a lorry or a stationary object.

High pressure jet wash Operating fault When washing your vehicle, direct the In the event of a malfunction, you are warned lance at least 30 cm away from the by the display of a message. sensors. Contact a CITROËN dealer or a qualified workshop to have the system checked.

124 Driving Rear parking sensors The information on proximity is given by an Parking sensors intermittent sound signal, the frequency of which The system is switched on by engaging reverse becomes more rapid as the vehicle approaches gear. the obstacle. This is confirmed by an audible signal. When the distance between the vehicle and The system is switched off when you come out the obstacle becomes less than about thirty of reverse gear. centimetres, the sound signal becomes continuous. The sound emitted by the speaker (right or left) allows you to identify which side the obstacle is on. Audible assistance Adjusting the audible signal On versions equipped with Using sensors located in the bumper, this CITROËN Connect Radio, function warns of the proximity of obstacles pressing this button opens (e.g. pedestrian, vehicle, tree, barrier) entering the audible signal volume their field of detection. adjustment window.

This function is a manoeuvring aid which cannot, in any circumstances, replace the 6 need for vigilance on the part of the driver. Visual assistance The driver must remain attentive and stay in control of their vehicle. They must always check the vehicle's surroundings before undertaking a The function signals the presence of obstacles manoeuvre. both within the sensor detection zone and in During the entire manoeuvre, the driver the vehicle path defined by the orientation of must ensure that the space remains clear. the steering wheel. In the example shown, only the obstacles present in the shaded area will be signalled by the audible assistance.

125 Driving

It supplements the audible assistance, F In the Driving/Vehicle menu - Certain materials (fabrics) absorb sound regardless of the vehicle's path, by displaying of the touch screen, select the waves: pedestrians may not be detected. on the screen those whose location represents "Driving functions" tab, then - Accumulated snow or dead leaves on the the distance between the obstacle and the deactivate/activate "Parking road surface can interfere with the vehicle's vehicle (white: more distant obstacles, orange: sensors". sensors. close obstacles, red: very close obstacles). - A front or rear impact to the vehicle can When the obstacle is very close, the "Danger" distort the settings of the sensors, which is symbol is displayed on the screen. not always detected by the system: distance The system will be deactivated measurements may be incorrect. automatically if a trailer is attached or a - The tilting of the vehicle if the boot is bicycle carrier is fitted on a towbar (vehicle very loaded can affect the distance fitted with a towbar installed in line with measurements. Front parking sensors the manufacturer's recommendations). - The sensors may be affected by poor In addition to the rear parking sensors, the weather conditions (heavy rain, thick fog, front parking sensors are triggered when an snowfall, etc.). obstacle is detected in front and the speed of The parking sensors are deactivated while the vehicle is still below 6 mph (10 km/h). the Park Assist system is measuring a The front parking sensors are interrupted if space. the vehicle stops for more than three seconds For more information on , in forward gear, if no further obstacles are Park Assist refer to the corresponding section. detected or when the speed of the vehicle exceeds 6 mph (10 km/h). Recommendations on care

Operating limits In bad or wintry weather, ensure that the The sound emitted by the speaker (front or sensors are not covered with mud, ice or rear) locates the obstacle in relation to the - Certain obstacles located in the sensors' snow. When reverse gear is engaged, an vehicle – in the vehicle trajectory, in front blind spots may not be detected or no audible signal (long beep) indicates that or behind. longer be detected during the manoeuvre. the sensors may be dirty. - Sounds such as those emitted by noisy vehicles and machinery (e.g. lorries, Activation/Deactivation pneumatic drills, etc.) may interfere with the vehicle's sensors. The system is activated or deactivated via the vehicle configuration menu. 126 Driving

The green lines 3 represent distances of about High pressure washing The reversing camera function may be one and two metres beyond the edge of your When washing your vehicle, direct the supplemented with parking sensors. vehicle's rear bumper. lance at least 30 cm away from the The turquoise blue curves 4 represent the sensors. The reversing camera cannot, in any maximum turning circle. circumstances, replace the need for vigilance on the part of the driver. Opening the tailgate causes the display to Operating fault disappear. If a fault occurs when shifting to reverse, this warning lamp Clean the reversing camera regularly comes on in the instrument panel, using a soft, dry cloth. accompanied by a message and an audible signal (short beep). High pressure washing Contact a CITROËN dealer or a qualified When washing your vehicle, keep the The superimposed representation of guide workshop to have the system checked. lance at least 30 cm away from the lines helps with the manoeuvre. camera lens.

They are represented by lines marked "on Reversing camera the ground" and do not allow the position 6 of the vehicle to be determined relative to Park Assist tall obstacles (for example: other vehicles, This system provides active parking etc.). assistance: it detects a parking space and then Some distortion of the image is normal. steers in the appropriate direction to park in It is normal to have part of the number this space while the driver controls the driving plate showing in the bottom of the screen. direction, engagement of gears, acceleration and braking.

The blue lines 1 represent the general direction To assist the driver in monitoring the of the vehicle (the gap represents the width of correct manoeuvring operation, the system your vehicle except for the door mirrors). automatically triggers the display of the rear The reversing camera is activated automatically The red line 2 represents a distance of about view camera and the activation of the parking when reverse gear is engaged. 30 cm beyond the edge of your vehicle's rear sensors. The image is displayed on the touch screen. bumper. 127 Driving

This system is a manoeuvring aid that Operation Select type of manoeuvre cannot under any circumstances replace F When approaching a parking area, reduce the vigilance of the driver. the speed of your vehicle to 19 mph The driver must remain in control of (30 km/h) or less. their vehicle. They must always check the surroundings of the vehicle before undertaking a manoeuvre and ensure that Function activation the space remains clear during the entire manoeuvre.

The system performs the measurements of available parking spaces and calculations of distances to obstacles using ultrasonic sensors built in the front and rear bumpers of the A manoeuvre selection page is displayed on the touch screen: by default, the "Entry" page if vehicle. F Press this button to activate the function. the vehicle has been running since the ignition was switched on, otherwise, the "Exit" page.

Activating the function deactivates the F Select the type and side of the manoeuvre blind spot sensors. to activate the parking space search. The selected manoeuvre can be changed at any time, even when searching for an At any time, up to starting the entry available space. manoeuvre or leaving the parking space, pressing the arrow located in the top The selection is accompanied by The system assists with the following left-hand corner of the display page the indicator lamp for this button manoeuvres: deactivates the function. coming on. A. Parking when entering a "parallel" parking space. B. Leaving a "parallel" parking space. C. Parking when entering a "bay" parking space.

128 Driving

Parking space search Once the vehicle has stopped, an instructions page is displayed on the screen. F You should drive at a distance of between F To prepare for the manoeuvre, follow the 0.50 m and 1.50 m from the row of parked instructions. vehicles, without ever exceeding 19 mph (30 km/h), until the system finds an available This symbol is displayed to space. confirm that you have followed the The parking space search stops over this limit. instructions. The function automatically deactivates once the vehicle speed exceeds 31 mph (50 km/h).

When the system finds an available space, For "parallel" parking, the space must at "OK" is displayed on the parking view, a minimum be equal to the length of your accompanied by an audible signal. vehicle plus 0.60 m. For "bay" parking, the width of the space must be equal to the width of your vehicle Preparing for the manoeuvre plus 0.70 m. The start of the manoeuvre is indicated by the display of this page, with the message "Manoeuvre under way", accompanied by an 6 audible signal. Reversing is indicated by this message: If the parking sensors function has been "Release the steering wheel, reverse". deactivated in the Driving/Vehicle menu of the touch screen, it will be automatically reactivated when the system is activated. The reversing camera and parking sensors are automatically activated to help you monitor the close surrounding area of your vehicle during the manoeuvre. F Move very slowly until the request to stop the vehicle is displayed: "Stop the vehicle" and the "STOP" panel accompanied by an audible signal. 129 Driving

During the manoeuvre 3 mph or 5 km/h, for parking space By the action of the driver: 5 exit. - taking over control of the steering, The system takes over the vehicle's steering. It - activating the direction indicator lamps on gives instructions on the manoeuvring direction the opposite side to that of the manoeuvre, when starting the entry and exit parallel parking - unfastening the driver's seat belt, During a manoeuvre the steering wheel manoeuvres and for all entry manoeuvres for - switching off the ignition. bay parking. rotates rapidly: do not hold the steering wheel nor place your hand between the There instructions are displayed as a symbol spokes of the steering wheel. Watch out Interruption by the system: accompanied by a message: for anything likely to block the manoeuvre - exceeding the speed limit: 5 mph (7 km/h) (loose and bulky clothing, scarves, ties, during the parking space entry manoeuvres and 3 mph (5 km/h) during the parking "Reverse" etc.) – Risks of injury! It is the driver's responsibility to monitor space exit manoeuvres, the state of the traffic continuously, - triggering the anti-slip regulation on a "Advance" especially vehicles coming towards you. slippery road, The driver should check that no object - opening a door or the boot, or person can hinder the advance of the - stalling the engine, The manoeuvring status is indicated by these vehicle. - system malfunction, symbols: - after ten manoeuvres to enter or exit a Manoeuvre in progress (green). parallel parking space and after seven manoeuvres to enter a parking bay.

Manoeuvre cancelled or finished The images from the camera(s) displayed Interrupting the manoeuvre automatically (red) (the arrows indicate that the on the touch screen may be distorted by deactivates the function. driver must take back control of their the relief. vehicle). In the presence of areas in shade, or in conditions of bright sunlight or inadequate lighting, the image may be darkened and The maximum speed limit indications during be of lower contrast. the manoeuvres are signalled by these symbols: The manoeuvre can be interrupted definitively 5 mph or 7 km/h, for parking space at any time, either by the action of the driver or 7 entry. automatically by the system.

130 Driving

The manoeuvring symbol is displayed in red, - The system does not detect spaces that are Do not use the system: accompanied by the "Manoeuvre cancelled" much larger than the vehicle itself or that - Alongside a soft shoulder (ditch) or message on the touch screen. are delimited by obstacles that are too low quay or on a cliff edge. A message encourages the driver to take back (pavements, studs, etc.) or too thin (trees, - When carrying an object extending control of their vehicle. posts, wire fences, etc.). beyond the vehicle size (ladder on the The function is deactivated after a few seconds - Certain obstacles located in the sensors' roof bars, bike carrier on the tailgate, and returns to the initial display. blind spots may not be detected or no etc.). longer detected during the manoeuvre. - With a non-approved tow ball in place. - Certain materials (fabrics) absorb sound - With snow chains fitted. waves: pedestrians may not be detected. End of the parking space entry or - In the event of under-inflation of a tyre. - A front or rear impact to the vehicle can exit manoeuvre - When driving on a small-diameter or upset the sensor settings which is not "space-saver" type spare wheel. The vehicle stops as soon as the manoeuvre is always detected by the system: distance - When the wheels fitted are different completed. measurements may be falsified. from the original ones. The manoeuvre symbol is displayed in red - If the boot is heavily loaded, the tilt of the - If one of the bumpers is damaged. accompanied by the message "Manoeuvre vehicle towards the rear may interfere with - After modifying one or both bumpers completed" on the touch screen. the distance measurements. (adding protection, etc.). When deactivated, the indicator lamp in the - If a camera is faulty. button goes off, accompanied by an audible The vehicle's sensors and camera(s) may be - If the sensors have been repainted signal. impaired by: outside the CITROËN dealer network. If entering a parking space, the driver may be 6 - accumulated snow or fallen leaves on the - With sensors not approved for your required to complete the manoeuvre. road, vehicle. - adverse weather conditions (heavy rain, - When the road surface is slippery (ice, thick fog, falling snow), etc.). Operating limits - noise interference from noisy vehicles and machinery (lorries, pneumatic drills, etc.). - The system can suggest an inappropriate parking space (parking prohibited, work in progress with damaged road surface, location alongside a ditch, etc.). - The system is not designed for performing the parking manoeuvre on a sharp curve.

131 Driving

In the event of a fault with the Recommendations on care The tyre under-inflation detection system power steering, this warning lamp does not replace the need for vigilance on flashes in the instrument panel, - Regularly check that the sensors and the part of the driver. accompanied by a message. cameras are clean. This system still requires you to check the If necessary, clean the camera lenses with You must stop as soon as it is safe to do so. tyre inflation pressure (including the spare a soft, dry cloth. Contact a CITROËN dealer or a qualified wheel) every month as well as before a - If using a high-pressure washer, do not workshop. long journey. direct the lance less than 30 cm from the Driving with under-inflated tyres impairs sensors and cameras. handling, extends braking distances and - In bad weather, or during the winter, ensure Tyre under-inflation causes premature tyre wear, particularly that the sensors and cameras are not in adverse conditions (heavy loads, high covered with mud, ice or snow. detection speeds, long journeys). System which automatically checks the pressures of the tyres while driving.

The system monitors the pressure in all four Operating faults tyres, as soon as the vehicle is moving. Driving with under-inflated tyres It compares the information given by the increases fuel consumption. When the function is not activated, wheel speed sensors with reference values, the button warning lamp flashing which must be reinitialised after every tyre and an audible signal indicates a pressure adjustment or wheel change. The tyre pressure specifications for your system fault. The system triggers an alert as soon as it vehicle can be found on the tyre pressure detects a drop in the pressure of one or more label. If the fault occurs during the use of the system, tyres. the warning lamp goes off. For more information on the Identification markings, refer to the If the fault in the parking sensors, corresponding section. indicated by this warning lamp coming on, occurs during use, it causes the function to deactivate.

In the event of a fault, have the system checked by a CITROËN dealer or a qualified workshop.

132 Driving

F If you have a compressor (such as the Tyre pressures should be checked when Before reinitialising the system, ensure one in the temporary puncture repair kit), the tyres are "cold" (vehicle stopped for that the pressures of the four tyres check the pressures of the four tyres when 1 hour or after a journey of less than are correct for the conditions of use cold. If it is not possible to make this check 6 miles (10 km) at moderate speeds). of the vehicle and conform to the immediately, drive carefully at reduced Otherwise (when hot), add 0.3 bar to the recommendations on the tyre pressure speed. pressures shown on the label. label. or The under-inflation alert can only be relied F In the event of a puncture, use the on if the reinitialisation of the system has temporary puncture repair kit or the spare been done with the pressures in the four wheel (depending on equipment). tyres correctly adjusted. Under-inflation alert The under-inflation detection system does not give a warning if a pressure is This warning is indicated by The warning remains active until the incorrect at the time of reinitialisation. continuous illumination of this lamp, system is reinitialised. an audible signal and a message displayed on the screen. Reinitialisation of the system is done via the touch screen, with the ignition on and the F Reduce speed immediately, avoid excessive Reinitialisation vehicle stationary. steering movements and sudden braking. F Stop as soon as it is safe to do so. The system must be reinitialised after any F In the Driving/Vehicle menu, adjustment to the pressures of one or more select the "Driving functions" tyres, and after changing one or more wheels. 6 tab, then "Reset under- inflation detection". The loss of pressure detected does not always cause visible bulging of the tyre. F Do not rely on a simple visual check. Select "Yes" to confirm. The reinitialisation is confirmed by the display of a message and an audible signal.

Snow chains The system does not have to be reinitialised after fitting or removing snow chains.

133 Driving

The under-inflation alert can only be relied on if the reinitialisation of the system has been done with the pressures in the four tyres correctly adjusted.

Operating fault

The flashing and then fixed illumination of the under-inflation warning lamp accompanied by illumination of the Service warning lamp indicates a fault in the system.

In this case, under-inflation monitoring of the tyres is no longer assured. Have the system checked by a CITROËN dealer or a qualified workshop.

After carrying out any work on the system, the pressures of the four tyres must be checked and the system reinitialised.

134 FILL UP WITH CONFIDENCE WITH TOTAL QUARTZ

LUBRICANTS For more than 45 years, TOTAL and CITROËN have shared common values: excellence, creativity and technological innovation. It is in this same spirit that TOTAL has developed a range of TOTAL QUARTZ lubricants adapted to CITROËN engines, making them even more fuel efficient and environmentally friendly. TOTAL and CITROËN test the reliability and the performance of their products during motorsport races in extreme conditions. Choose TOTAL QUARTZ lubricants for servicing your vehicle; this is your assurance of optimum durability and performance from your engine. Practical information Compatibility of fuels

Fuel used for petrol engines Diesel fuel that meets standard The only Diesel additives authorised for The petrol engines are compatible with biofuels EN16734 mixed with a biofuel that use are those that meet the B715000 that conform to current and future European meets standard EN14214 (possibly standard. standards and which can be obtained from containing up to 10% Fatty Acid Methyl filling stations: Ester), Diesel at low temperature Paraffinic Diesel fuel that meets At temperatures below 0°C (+32°F), the standard EN15940 mixed with a biofuel Petrol that meets standard EN228, formation of paraffins in summer-type Diesel that meets standard EN14214 (possibly mixed with a biofuel that meets fuels could entail an abnormal operation containing up to 7% Fatty Acid Methyl standard EN15376. of the fuel supply circuit. To avoid this, we Ester). recommend using winter-type Diesel fuel and B20 or B30 fuel that meets the standard keeping the fuel tank more than 50% full. EN16709 can be used with your Diesel If, despite this, at temperatures below -15°C The only petrol additives authorised for engine. However, the use of this (+5°F) the engine has problems starting, use are those that meet the B715001 fuel, even occasional, requires strict just leave the vehicle in a garage or heated standard. application of the special servicing workshop for a little while. conditions referred to as "Arduous Fuel used for Diesel conditions". engines The Diesel engines are compatible with For more information, contact a CITROËN Travelling abroad dealer or a qualified workshop. biofuels that conform to current and future Certain fuels could damage the engine of European standards and which can be your vehicle. obtained from filling stations: The use of any other type of (bio)fuel In certain countries, the use of a particular Diesel fuel that meets standard (vegetable or animal oils, pure or diluted, fuel may be required (specific octane EN590 mixed with a biofuel that meets domestic fuel, etc.) is strictly prohibited rating, specific trade name, etc.) to ensure standard EN14214 (possibly containing (risk of damage to the engine and fuel correct operation of the engine. up to 7% Fatty Acid Methyl Ester), system). For any additional information, contact a dealer.

136 Practical information

F With the vehicle unlocked, press the rear- For more information on Running out of Fuel tank central part of the filler flap. fuel (Diesel), refer to the corresponding Tank capacity: F Take care to select the pump that delivers section. - Petrol: approximately 50 litres. the correct type of fuel for your vehicle. - Diesel: approximately 45 or 50 litres F Insert the key in the cap then turn it to (depending on version). Refilling the left, or turn the cap by hand to the left A label on the inside of the fuel filler flap (depending on version). If you have put in the wrong fuel for reminds you of the type of fuel to use, your vehicle, you must have the tank depending on your engine type. drained and refilled with the correct Additions of fuel must be of at least 5 litres, in fuel before you start the engine. order to be registered by the fuel gauge. Opening the filler cap may create a noise caused by an inrush of air. This is entirely normal and results from the sealing of the fuel Low fuel level system. When the low fuel level is reached, this warning lamp in the instrument To refuel in complete safety: panel comes on, accompanied by F You must switch off the engine. F Remove the cap and place it on its support an audible warning, a message and (on the filler flap). the last bar of the fuel gauge flashes F Insert the filler nozzle as far as possible in red. before starting the filling (risk of splashing). When it first comes on, about 5 litres of fuel F Fill up the tank, but do not continue after remain in the tank. the 3rd cut-off of the nozzle; this could cause malfunctions. 7 Until sufficient fuel has been added, this warning lamp appears every time the ignition is switched on, accompanied by an audible signal and a message. This audible warning Once you have finished refuelling: and message are repeated with increasing F Refit the filler cap. frequency as the fuel level drops towards "0". F Turn the key to the right then remove it from You must refuel as soon as possible to avoid the cap, or turn the cap manually to the right running out. (depending on version). F Push the fuel flap to close it.

137 Practical information

If your vehicle is fitted with Stop & Start, Operation Travelling abroad never refuel with the engine in STOP As Diesel fuel pump nozzles may be mode; you must switch off the ignition different in other countries, the presence using the key, or the START/STOP button of the misfuel prevention device may make if your vehicle has Keyless Entry and refuelling impossible. Starting. Not all Diesel vehicles are fitted with misfuel protection, so before travelling abroad, we recommend that you check with the CITROËN dealer network whether your vehicle is suitable for the fuel pumps Fuel cut-off in the country in which you intend to travel. When a petrol filler nozzle is introduced into the Your vehicle is equipped with a safety device Diesel tank, it comes into contact with the flap. which cuts off the fuel supply in the event of a The system remains closed and prevents filling. collision. Do not persist but introduce a Diesel type filler nozzle. Snow chains Misfuel prevention In wintry conditions, snow chains improve traction as well as the It remains possible to use a fuel can to fill (Diesel) behaviour of the vehicle when the tank. (Depending on the country of sale.) braking. In order to ensure a good flow of fuel, Mechanical device which prevents filling the do not place the nozzle of the fuel can in tank of a Diesel vehicle with petrol. It helps direct contact with the flap of the misfuel avoid the risk of engine damage that can result prevention device and pour slowly. Snow chains must be fitted only to the from filling with the wrong fuel. front wheels. They must never be fitted to "space-saver" type spare wheels.

Take account of the legislation in force in your country on the use of snow chains and the maximum authorised speed.

138 Practical information Installation tips Use only the chains designed to be fitted to the Fitting type of wheel fitted to your vehicle: F If you have to fit the chains during a journey, stop the vehicle on a flat surface on the side of the road. Original tyre size Chain types F Apply the parking brake and position any wheel chocks to prevent movement of your vehicle. 205/55 R16 Maximum 9 mm link F Fit the chains following the instructions provided by the manufacturer. F Move off gently and drive for a few 205/50 R17 Cannot be fitted with chains moments, without exceeding 31 mph (50 km/h). For more information on snow chains, contact a F Offer up the corresponding screen to the F Stop your vehicle and check that the snow CITROËN dealer or a qualified workshop. chains are correctly tightened. front bumper upper grille. F Press on the edge to engage its fixing elements one by one. It is strongly recommended that before Proceed in the same way for the screen on the you leave, you practise fitting the snow Very cold climate screens lower grille. chains on a level and dry surface. Removable protective screens which prevent the accumulation of snow at the radiator Removing cooling fan. Avoid driving with snow chains on roads F Unclip one by one the fixing elements of that have been cleared of snow to avoid Before fitting or removing a screen, each screen. damaging your vehicle's tyres and the ensure that the engine is off and the 7 road surface. If your vehicle is fitted with cooling fan has stopped. alloy wheels, check that no part of the Do not forget to remove the very cold chain or its fixings is in contact with the climate screens: wheel rim. - when the exterior temperature exceeds It is recommended that the screens be 10°C, fitted and removed by a CITROËN dealer - when towing, or a qualified workshop. - at speeds above 75 mph (120 km/h).

139 Practical information

Towing device Observe the maximum authorised towable Energy economy mode weight, indicated on your vehicle's Load distribution System which manages the duration of use of registration certificate, the manufacturer's F Distribute the load in the trailer so that the certain functions to conserve a sufficient level label as well as in the Technical data heaviest items are as close as possible to of charge in the battery. section of this guide. the axle and the nose weight approaches After the engine has stopped, you can still use Complying with the maximum the maximum permitted without exceeding functions such as the audio and telematics authorised nose weight (ball joint) it. system, windscreen wipers, dipped beam also includes the use of accessories Air density decreases with altitude, thus headlamps, courtesy lamps, etc. for a (bicycle carriers, tow boxes, etc.). reducing engine performance. The maximum maximum combined duration of about forty towed load must be reduced by 10 % for every minutes. 1,000 metres of altitude.

Observe the legislation in force in the Entering the mode country in which you are driving. A message appears on the touch screen Use towing devices and their genuine indicating that the vehicle has switched to harnesses approved by CITROËN. It is economy mode and the active functions are put on standby. recommended that the installation be Remove the quickly detachable towball performed by a CITROËN dealer or a when not towing a trailer. If a telephone call is being made at this qualified workshop. time, it will be maintained for around 10 If the towing device is not fitted by minutes with the Bluetooth hands-free a CITROËN dealer, it must still be system of your audio system. fitted in accordance with the vehicle manufacturer's instructions. Load reduction mode Certain driving or manoeuvring aid System which manages the use of certain functions are automatically disabled if an Exiting the mode functions according to the level of charge approved towing device is used. remaining in the battery. These functions will be automatically restored When the vehicle is being driven, the load the next time the vehicle is used. reduction function temporarily deactivates In order to restore the use of these functions certain functions, such as air conditioning, immediately, start the engine and let it run: - for less than ten minutes, to use the heated rear screen, etc. equipment for approximately five minutes, The deactivated functions are reactivated automatically as soon as conditions permit.

140 Practical information

- for more than ten minutes, to use the equipment for up to approximately thirty Changing a wiper blade Removing minutes. Let the engine run for the duration specified to Before removing a front ensure that the battery charge is sufficient. Do not repeatedly and continuously restart the wiper blade engine in order to charge the battery.

A flat battery prevents the engine from starting. For more information on the 12 V battery, refer to the corresponding section.

F Raise the corresponding wiper arm. F Pull the screenwash delivery pipe to 7 disconnect it from the jet (located on the wiper blade). F Unclip the wiper blade and remove it. F Within one minute after switching off the ignition, operate the wiper stalk to Refitting position the wiper blades vertically on the F Put the corresponding new wiper blade in windscreen. place and clip it. Or F Connect the screenwash delivery pipe to F One minute or more after switching off the the jet on the wiper blade. ignition, straighten the arms manually. F Carefully lower the wiper arm. 141 Practical information After refitting a front wiper blade Version without longitudinal Version with longitudinal bars bars F Switch on the ignition. F Operate the wiper stalk again to park the wiper blades.

Replacement of wiper arms should be carried out only by a CITROËN dealer or in a qualified workshop.

Roof bars To install the roof bars, you must secure them You must fit the transverse bars to the only to the four fixing points in the roof frame. longitudinal bars at the fixing points indicated For safety reasons and to avoid damaging These points are masked by the vehicle's doors by engraved markings on the longitudinal bars. the roof, it is essential to use the when closed. transverse bars approved for your vehicle. Recommendations F Distribute the load uniformly, taking care to avoid overloading one of the Observe the fitting instructions and the sides. conditions of use in the guide supplied F Arrange the heaviest part of the load with the roof bars. as close as possible to the roof. F Lash the load down securely and fit a warning flag if it overhangs the vehicle. F Drive gently: the vehicle will be more susceptible to the effects of side winds (stability may be affected). The roof bar fixings include a lug to be fitted F Remove the roof bars once they are no into the hole at each fixing point. longer needed.

142 Practical information

F Pull the release lever, located at the bottom F Pull on the bonnet to check that it is fully Maximum load, distributed over the roof of the door aperture, towards you. latched. bars, for a loading height not exceeding 40 cm: 80 kg. As this value may change, please The location of the interior bonnet release verify the maximum load quoted in the lever prevents the opening of the bonnet instructions supplied with the roof bars. when the left-hand front door is shut. If the height exceeds 40 cm, adapt the speed of the vehicle to the profile of the road to avoid damaging the roof bars and When the engine is hot, handle the the fixings on the vehicle. exterior safety catch and the stay with F Lift the lever and raise the bonnet. Be sure to refer to national legislation in care (risk of burns), using the protected order to comply with the regulations for area. transporting objects which are longer than When the bonnet is open, take care not to the vehicle. damage the safety catch. Do not open the bonnet under very windy conditions.

Bonnet Opening Before doing anything under the bonnet, F Unclip the stay from its housing and place it deactivate the Stop & Start system to in the support slot to hold the bonnet open. avoid the risk of injury related to an 7 automatic change to START mode. Closing F Take the stay out of the support slot. The cooling fan may start after F Clip the stay in its housing. switching off the engine: take care F Lower the bonnet and release it near the with articles and clothing that might be end of its travel. caught by the fan blades. F Open the left-hand front door.

143 Practical information

1. Screenwash fluid reservoir. Because of the presence of electrical Take care when working under the bonnet, 2. Engine coolant reservoir. equipment under the bonnet, it is as certain areas of the engine may be Brake fluid reservoir. recommended that exposure to water 3. extremely hot (risk of burns) and the (rain, washing, etc.) be limited. 4. Battery. cooling fan could start at any time (even 5. Fusebox. with the ignition off). 6. Air filter. Engines 7. Engine oil dipstick. 8. Engine oil filler cap. Petrol 9. Remote earth point. Used products

Avoid prolonged contact of used oil or The Diesel fuel system operates under fluids with the skin. very high pressure. Most of these fluids are harmful to health All work on this circuit must be carried out or indeed very corrosive. only by a CITROËN dealer or a qualified workshop. Do not discard used oil or fluids into sewers or onto the ground. Diesel Take used oil to a CITROËN dealer or Checking levels a qualified workshop and dispose of it in the containers reserved for this Check all of these levels regularly, in line with purpose. the manufacturer's service schedule. Top them up if necessary, unless otherwise indicated. If a level drops significantly, have the corresponding system checked by a CITROËN Engine oil level dealer or a qualified workshop. The check is carried out either when These engines are examples provided as a the ignition is switched on using the guide. oil level indicator in the instrument The locations of the following elements may The fluid must comply with the panel for vehicles equipped with an vary: manufacturer's recommendations and with electric gauge, or using the dipstick. - Air filter. the vehicle's engine. - Engine oil dipstick. - Engine oil filler cap. 144 Practical information

To ensure that the reading is correct, your Topping up the engine oil level vehicle must be parked on a level surface The location of the oil filler cap is shown in the with the engine stopped for more than corresponding underbonnet layout view. 30 minutes. F Unscrew the oil filler cap to access the filler A = MAX opening. It is normal to top up the oil level between B = MIN F Add oil in small quantities, avoiding any two services (or oil changes). CITROËN spills on engine components (risk of fire). recommends that you check the level, and top F Wait a few minutes before checking the up, if necessary, every 3,000 miles (5,000 km). level again using the dipstick. F Add more oil if necessary. F After checking the level, carefully refit the oil Checking using the dipstick If you find that the level is above the A mark or filler cap and the dipstick in its tube. below the B mark, do not start the engine. The location of the dipstick is shown in the - If the level is above the MAX mark (risk of corresponding underbonnet layout view. damage to the engine), contact a CITROËN F Take the dipstick by its coloured grip and dealer or a qualified workshop. pull it out completely. - If the level is below the MIN mark, you must F Wipe the end of the dipstick using a clean top up the engine oil. After topping up the oil, the check when non-fluffy cloth. switching on the ignition with the oil level F Refit the dipstick and push fully down, then indicator in the instrument panel is not pull it out again to make the visual check: valid during the 30 minutes after topping the correct level is between marks A and B. Oil grade up. Before topping up the oil or changing the oil, 7 check that the oil is the correct grade for your Engine oil change engine and conforms to the manufacturer's In order to maintain the reliability of the engine recommendations. and emissions control system, never use additives in the engine oil.

145 Practical information Brake fluid level Fluid specification The fluid level should be close to the When the engine is warm, the temperature of The screenwash fluid must be topped up with a "MAX" mark. If it is not, check the the coolant is regulated by the fan. ready for use mix. In winter (temperatures below zero), a fluid with brake pad wear. In addition, as the cooling system is antifreeze must be used that is appropriate for pressurised, wait at least one hour after the prevailing conditions, in order to preserve switching off the engine before carrying out any the elements of the system (pump, tank, ducts, Brake fluid change work. etc.). To avoid the risk of scalding when you need to Refer to the manufacturer's service schedule Filling with pure water is prohibited under all top up in an emergency, place a cloth around for details of the interval for this operation. circumstances (risk of freezing, limestone the cap and unscrew the cap by two turns to deposits, etc.). allow the pressure to drop. Fluid specification Once the pressure has dropped, remove the cap and top up the coolant. The fluid must conform to the manufacturer's Diesel additive level (Diesel recommendations. engine with particle filter) The cooling fan may start after switching off the engine: take care The additive reservoir low level is with articles and clothing that might be indicated by fixed illumination of this Coolant level caught by the fan blades. warning lamp, accompanied by an audible signal and a message that Check the coolant level regularly. the particle filter additive level is It is normal to top up the fluid Fluid specification too low. between two services. The fluid must conform to the manufacturer's recommendations. To ensure that the reading is correct, your Topping up vehicle must be parked on a level surface with The reservoir must be topped up without delay the engine cool. Screenwash fluid level by a CITROËN dealer or a qualified workshop. The coolant level should be close to the "MAX" mark but should never exceed it. Top up the level when necessary. If the level is close to or below the "MIN" mark, it is essential to top up. A low coolant level presents a risk of serious damage to your engine. 146 Practical information

AdBlue level Versions equipped with Stop & Start are Oil filter fitted with a 12 V lead-acid battery of An alert is triggered once the reserve level is Change the oil filter each time the specific technology and specification. reached. engine oil is changed. Its replacement should be carried out To avoid the vehicle being immobilised as per only by a CITROËN dealer or a qualified regulations, you must top up with AdBlue. workshop. For more information on AdBlue and the SCR system, and, in particular, topping it up, refer to Particle filter (Diesel) the corresponding section. The start of saturation of the particle Air filter filter is indicated by the constant illumination of this warning lamp Depending on the environment Checks accompanied by an alert message. (e.g. dusty atmosphere) and the Unless otherwise indicated, check these use of the vehicle (e.g. city driving), components in accordance with the replace it twice as often, if manufacturer's service schedule and according necessary. to your engine. Otherwise, have them checked by a CITROËN dealer or a qualified workshop. Passenger compartment filter Depending on the environment 12 V battery (e.g. dusty atmosphere) and the The battery does not require any use of the vehicle (e.g. city driving), maintenance. replace it twice as often, if 7 However, check regularly that the necessary. terminals are correctly tightened (versions without quick release terminals) and that the connections are clean. A clogged passenger compartment For more information on the precautions filter may have an adverse effect on to take before starting work on the the performance of the air conditioning 12 V battery, refer to the corresponding system and generate undesirable odours. section.

147 Practical information

As soon as the traffic conditions permit, Automatic gearbox Parking brake regenerate the filter by driving at a speed If excessive travel or a loss of of at least 37 mph (60 km/h) until the The gearbox does not require any effectiveness of this system is warning lamp goes off. maintenance (no oil change). noticed, the parking brake must If the warning lamp stays on, this indicates be checked, even between two a low Diesel additive level. services. For more information on Checking the levels and particularly on the level of Electronic gearbox This system must be checked by a CITROËN Diesel additive, refer to the corresponding dealer or a qualified workshop. section. The gearbox does not require any On a new vehicle, the first particle maintenance (no oil change). filter regeneration operations may be Only use products recommended by accompanied by a "burning" smell, which CITROËN or products of equivalent quality is perfectly normal. Brake pads and specification. Following prolonged operation of the In order to optimise the operation of units vehicle at very low speed or at idle, Brake wear depends on the style as important as those in the braking you may, in exceptional circumstances, of driving, particularly in the case system, CITROËN selects and offers very notice the emission of water vapour at the of vehicles used in town, over short specific products. exhaust on acceleration. This does not distances. It may be necessary to After washing the vehicle, dampness, or affect the behaviour of the vehicle or the have the condition of the brakes in wintry conditions, ice can form on the environment. checked, even between vehicle brake discs and pads: braking efficiency services. may be reduced. Make light brake Unless there is a leak in the circuit, a drop in applications to dry and defrost the brakes. the brake fluid level indicates that the brake Manual gearbox pads are worn. The gearbox does not require any maintenance (no oil change). Brake disc/drum wear For information on checking brake disc/drum wear, contact a CITROËN dealer or a qualified workshop.

148 Practical information

® The AdBlue® is contained in a For more information on the Warning AdBlue (BlueHDi special tank holding about and indicator lamps and the associated engines) 17 litres. alerts, refer to the corresponding section.

An alert system is triggered automatically once Freezing of the AdBlue® the reserve level is reached: you can then drive AdBlue® freezes at temperatures below for a further 1,500 miles (2,400 km) before the around -11°C. tank is empty. The SCR system includes a heater for the AdBlue® tank, allowing you to continue If the estimated distance travelled by your driving in very cold conditions. vehicle between two services is greater than 12,500 miles (20,000 km), it will be necessary to top up the AdBlue. To respect the environment and ensure compliance with the Euro 6 standard, without ® adversely affecting the performance or fuel Once the AdBlue® tank is empty, a system Supply of AdBlue consumption of its Diesel engines, CITROËN required by regulations prevents starting ® has taken the decision to equip its vehicles of the engine. It is recommended that the AdBlue be with a system that combines SCR (Selective If the SCR system is faulty, the level of topped up as soon as the first alert is Catalytic Reduction) with a Diesel particle filter emissions from your vehicle will no longer issued indicating that the reserve level has (DPF) for the treatment of exhaust gases. meet the Euro 6 standard: your vehicle been reached. becomes polluting. In the event of a confirmed fault with the In order to ensure that the SCR system SCR system, you must go to a CITROËN operates correctly: 7 SCR system dealer or a qualified workshop as soon as - Use only AdBlue® liquid that meets the ® possible: after travelling the distance of Using a liquid called AdBlue that contains ISO 22241 standard. 685 miles (1,100 km), a system preventing urea, a catalytic converter turns up to 85% of - Never transfer AdBlue® to another the engine starting will be triggered the nitrogen oxides (NOx) into nitrogen and container: it would lose its purity. automatically. water, which are harmless to health and the - Never dilute AdBlue® with water. environment. In either case, a range indicator gives you the distance you can travel before the vehicle is immobilised.

149 Practical information You can obtain AdBlue® from a CITROËN Precautions in use In winter, check that the temperature of the dealer or a qualified workshop. vehicle is above -11°C. If not, in freezing AdBlue® is a urea-based solution. This liquid is weather, the AdBlue® cannot be poured into the non-flammable, colourless and odourless (kept tank. Park your vehicle somewhere warmer for You can also visit a service station in a cool area). a few hours before topping up. ® equipped with AdBlue pumps specially In the event of contact with the skin, wash the designed for private vehicles (for those affected area with soap and running water. In ® versions with access to the AdBlue tank the event of contact with the eyes, immediately ® via the fuel filler flap). rinse the eyes with large amounts of water In the event of an AdBlue breakdown, or with an eye wash solution for at least confirmed by the message "Add AdBlue: 15 minutes. If a burning sensation or irritation Starting impossible", you must top up with persists, get medical attention. at least 5 litres. Never top up from an AdBlue® dispenser If swallowed, immediately rinse the mouth with reserved for heavy goods vehicles. clean water and then drink plenty of water. In certain conditions (high temperature, for Never pour AdBlue® into the Diesel fuel example), the risk of releasing ammonia cannot tank. be discounted: do not inhale the fluid. Ammonia Recommendations on vapour has an irritant effect on mucous storage membranes (eyes, nose and throat). For the specifics associated with the AdBlue® freezes at about -11°C and access configuration for the AdBlue® tank deteriorates above 25°C. It should be stored in (via the boot or via the fuel filler flap), refer a cool place and protected from direct sunlight. to the descriptions given in detail further Under these conditions, the fluid can be kept on. for at least a year. Keep AdBlue® out of reach of children, in If the additive has frozen, it can be used once it its original container or bottle. If any AdBlue® is splashed, or if there are has completely thawed out. any spillages on the side of the body, rinse immediately with cold water or wipe with a damp cloth. Never keep containers or bottles of Procedure If the fluid has crystallised, clean it off AdBlue® in your vehicle. using a sponge and hot water. Before starting the top up procedure, ensure that the vehicle is parked on a flat and level surface.

150 Practical information

F Switch off the ignition and remove the key. F Take non-drip bottles of AdBlue®. After first Important: in the event of a top-up after checking the use-by date, read carefully a breakdown because of a lack of Or AdBlue, you must wait around 5 minutes F With K eyless Entry and Starting, press the the instructions on use on the label before before switching on the ignition, without "START/STOP" button to switch off the pouring the contents of the bottle into your ® opening the driver's door, locking engine. vehicle's AdBlue tank. the vehicle, introducing the key into F After filling, perform the same operations in the ignition switch, or introducing reverse order. the key of the Keyless Entry and Starting system into the passenger compartment. Switch on the ignition, then wait for 10 seconds before starting the engine. Access to the AdBlue® tank Access to the AdBlue® tank via the fuel filler flap via the boot A blue cap under the fuel filler flap indicates Filling the AdBlue® tank is an operation access to the AdBlue® tank. included in every routine service on your vehicle by a CITROËN dealer or a qualified workshop. Nevertheless, given the capacity of the tank, it may be necessary to top up the fluid between F From the boot, lift the carpet and then, services, as soon as an alert (warning lamps depending on the equipment, lift out the and a message) indicates it. spare wheel and/or the storage box. 7 You are recommended to go to a CITROËN F Without pressing, turn the black cap a dealer or a qualified workshop. quarter turn anti-clockwise and lift it off. Read the following procedure carefully to If you intend to do the topping-up yourself, F Turn the blue cap anti-clockwise. be able to top up properly. read the following procedure carefully. F Switch off the ignition and remove the key. Or F With K eyless Entry and Starting, press the The supply in a non-drip bottle simplifies the "START/STOP" button to switch off the topping-up. engine.

151 Practical information

F With the vehicle unlocked and the fuel filler For the care of the stickers in the rear door flap open, turn the AdBlue® blue filler cap Advice on care and windows, we recommend the following: anti-clockwise. maintenance - Use a wide jet at a temperature of F Obtain a container of AdBlue®. After first Recommendations on the care and between 25°C and 40°C. checking the use-by date, read carefully maintenance of your vehicle are given in the - Where possible, direct the jet at right the instructions on use on the label before Maintenance and Warranty Guide. angles to the stickers. pouring the contents of the container into your vehicle's AdBlue® tank. Leather Or Leather is a natural product. Appropriate ® F Insert the AdBlue pump nozzle and fill the regular care and cleaning is essential for its tank until the nozzle stops automatically. durability.

Refer to your vehicle's Maintenance and Warranty Guide for information on all the special precautions to observe. Important: To prevent the AdBlue® tank from overflowing, it is recommended: F To top up between 10 and 13 litres using AdBlue® containers. Care of the stickers Or These styling stickers are treated to give good F If filling in a service station, stop after resistance to ageing and tearing. the third automatic shut-off of the They have been designed to allow you to nozzle. customise your vehicle's bodywork. When using a high pressure jet wash, keep the end of the lance at least 30 centimetres from the stickers. F After refilling, carry out these same operations in reverse order.

152 In the event of a breakdown

Running out of fuel Before leaving your vehicle to set up and Temporary puncture (Diesel) install the triangle, switch on the hazard repair kit warning lamps and put on your high On vehicles fitted with HDi engines, the fuel visibility vest. system must be primed if you run out of fuel. Scan the QR code on page 3 to view explanatory videos. If the engine does not start first time, do not keep trying, but start the procedure Comprising a compressor and a sealant again from the beginning. cartridge, it allows the temporary repair of a tyre so that you can drive to the nearest garage. BlueHDi engines It is designed to repair most punctures which could affect the tyre, located on the tyre tread F Fill the fuel tank with at least five litres of or shoulder. Diesel fuel. F Switch on the ignition (without starting the engine). Refer to the manufacturer's instructions on F Wait around 6 seconds and switch off the Only the 12 V socket at the front of using the triangle. ignition. the vehicle allows the compressor to be F Repeat the operation 10 times. connected for long enough to repair or F Operate the starter to run the engine. inflate the vehicle tyre. Placing the triangle The other 12 V sockets of the vehicle on the road are not designed to be used with the compressor. Warning triangle (storage) F Place the triangle behind the vehicle, as This safety device is used in addition to the required by the legislation in force in your hazard warning lamps. country. 8 Its presence in the vehicle may be mandatory, depending on country. The triangle is available as an accessory; The triangle may be stowed under the boot contact a CITROËN dealer or a qualified carpet (in the storage box) or, depending on workshop. version, under the front passenger seat.

153 In the event of a breakdown

Under-inflation detection List of tools Composition of the kit After repair of the tyre, the warning lamp will remain on until the system is reinitialised. For more information on Tyre under- inflation detection, refer to the corresponding section.

Access to the kit 1. 12 V compressor, with built-in pressure gauge. 1. Temporary puncture repair kit. Contains a sealant cartridge for the 2. Bottle of sealant, with built-in hose. temporary repair of a tyre and can also be 3. Speed limit sticker. used for adjusting tyre pressures. 2. Socket for the security bolts (located in the glove box or in the tool box) (depending on version). Serves for adapting the wheelbrace to the special "security" bolts. The tyre inflation pressures are given on 3. Removable towing eye. This kit is installed in the storage box, under this label. the boot floor.

For more information on Towing the vehicle and using the removable towing eye, refer to the corresponding section. Repair procedure F Park the vehicle without obstructing any traffic and apply the parking brake. F Follow the safety instructions (hazard warning lamps, warning triangle, wearing high visibility vest, etc.) according to the legislation in force in the country where you are driving. 154 In the event of a breakdown

F Switch off the ignition. F Remove the valve cap from the tyre to be The speed limit sticker must be secured F repaired, and place it in a clean area. Uncoil the pipe stowed under the to the interior of the vehicle in the driver's compressor. field of vision, to remind you that a wheel is in temporary use.

The tyre inflation pressures are given on this label.

F Switch on the ignition. F Connect the pipe from the compressor to F Connect the hose from the bottle of sealant the bottle of sealant. to the valve of the tyre to be repaired and tighten firmly. Avoid removing any foreign bodies which F Check that the compressor switch is at the have penetrated into the tyre. "O" position. F Uncoil fully the electric cable, stowed under the compressor. F Connect the compressor's electrical connector to the vehicle's 12 V socket.

F Affix the speed limit sticker. F Start the compressor by turning the switch to the "l" position until the pressure of the 8 tyre reaches 2.0 bars. The sealant product is injected under pressure into the tyre; do not disconnect the hose of the valve during F Turn the sealant bottle over and secure it in this operation (risk of blowback). the cut-out provided on the compressor.

155 In the event of a breakdown

After about 7 minutes, if a pressure of 2 bars is not reached, this indicates that the tyre is not repairable; contact a CITROËN dealer or a qualified workshop for assistance.

F Place the switch in the "O" position. F Disconnect the compressor's electric plug F Drive immediately for approximately three from the vehicle's 12 V socket. miles (five kilometres), at reduced speed F Screw the pipe onto the valve and tighten F Refit the cap on the valve. (between 12 and 37 mph (20 and 60 km/h)), firmly. F Remove the kit. to plug the puncture. F Check that the compressor switch is at the F Remove and then store the bottle of sealant. F Stop to check the repair and measure the tyre pressure using the kit. "O" position. F Uncoil fully the electric cable, stowed under Do not exceed the speed of 50 mph the compressor. Take care, the sealant product is harmful (80 km/h) when driving with a tyre F Connect the compressor's electrical if swallowed and causes irritation to the repaired using this type of kit. connector to the vehicle's 12 V socket. eyes. F Switch on the ignition. Keep this product out of the reach of children. Checking/adjusting The use-by date is marked on the bottle. tyre pressures After use, do not discard the bottle by the roadside, take it to a CITROËN dealer or You can also use the compressor, an authorised waste disposal site. The tyre inflation pressures are given on without injecting sealant, to check and, if this label. Do not forget to obtain a new bottle of necessary, adjust the tyre pressures sealant, available from a CITROËN dealer or a qualified workshop.

F Remove the valve cap from the tyre and place it in a clean area. F Uncoil the pipe stowed under the compressor.

156 In the event of a breakdown

Do not drive more than 125 miles (200 km) Access to tools with the repaired tyre; see a CITROËN dealer or a qualified workshop to change the tyre.

Should the pressure of one or more tyres be adjusted, it is necessary to reinitialise the under-inflation detection system. For more information on Tyre under- inflation detection, refer to the The tools are installed in the boot under the F Start the compressor by placing the switch corresponding section. floor. at the "I" position and adjust the pressure Remove the boot carpet for access. to the value shown on the vehicle's tyre pressure label. To deflate: press the black button located on the compressor pipe, near List of tools the valve connection. Spare wheel

Scan the QR code on page 3 to view explanatory videos.

If a pressure of 2 bars is not reached after Procedure for changing a damaged wheel with 7 minutes, this indicates that the tyre is the spare wheel using the tools provided with not repairable; contact a CITROËN dealer the vehicle. or a qualified workshop for assistance. 8 F Once the correct pressure is reached, put the switch to the "O" position. F Remove the kit then stow it. 1. Wheelbrace. 2. Jack with built-in handle. Used to raise the vehicle. 157 In the event of a breakdown 3. Wheel bolt cover removal tool. Access to the spare wheel F Remove the fastening device (nut and bolt). To remove the alloy wheel bolt covers F Raise the spare wheel towards you from the or the central bolt cover (depending on rear. version). F Take the wheel out of the boot. 4. Removable towing eye. 5. Socket for the security bolts (located in the glove box or in the tool box) (depending on Putting the wheel back in place country of sale). Serves for adapting the wheelbrace to the F Put the wheel back in its housing. special "security" bolts. F Loosen the nut on the bolt by a few turns.

For more information on Towing, refer to the corresponding section.

The spare wheel is located in the boot under All of these tools are specific to your the floor. vehicle and can vary according to the level Depending on engine, the spare wheel is a of equipment. standard wheel or the space-saver type. Do not use them for any other purposes. Taking out the wheel

The jack should only be used to change a wheel with a damaged or punctured tyre. Do not use any jack other than the one supplied with this vehicle. F If the vehicle does not have its original jack, Position the fastening device (nut and bolt) contact a CITROËN dealer or a qualified in the middle of the wheel. F workshop to obtain the correct jack for it. Tighten the central nut to retain the wheel The jack meets European standards, correctly. F Clip the tool storage box into place. as defined in the Machinery Directive 2006/42/EC. The jack does not require any If there is no wheel in the well, the maintenance. F Unclip and take out the tool storage box. fastening device (nut and bolt) cannot be F Loosen the central nut. refitted.

158 In the event of a breakdown

Removing a wheel Wheel with hub cap Ensure that the jack is stable. If the When refitting the wheel, after tightening ground is slippery or loose, the jack may Parking the vehicle the wheel bolts, refit the hub cap, starting slip or collapse – Risk of injury! Park the vehicle where it does not block by placing its aperture in line with the Ensure that the jack is positioned strictly traffic: the ground must be level, stable valve and then pushing it into place all at one of jacking points, A or B, under the and non-slippery. round its edge with the palm of your hand. vehicle, making sure that the vehicle's With a manual gearbox, engage first contact surface is centred on the head of gear then switch off the ignition to block the jack. Otherwise, the vehicle could be the wheels. List of operations damaged and/or the jack could collapse – With an automatic gearbox, place the Risk of injury! gear selector at position P then switch off the ignition to block the wheels. With an electronic gearbox, place the gear selector at position D then switch off the ignition to block the wheels. Apply the parking brake and check that the warning lamp is on in the instrument panel. The passengers must get out of the vehicle and wait in safety. Make sure that the jack is correctly positioned at one of the vehicle's jacking points. Incorrect use of the jack could cause the F If your vehicle has steel wheels, remove the F vehicle to drop. hub cap. Place the base plate of the jack 2 on the Never go underneath a vehicle raised F If your vehicle has alloy wheels, remove the ground and ensure that it is directly below using a jack; use an axle stand. the front or rear jacking point provided bolt cover(s) using tool 3. A B F on the chassis, whichever is closest to the 8 If your vehicle has security wheel bolts, fit wheel to be changed. security bolt socket 5 to wheelbrace 1 to slacken the security bolt. F Loosen the other bolts using wheelbrace 1 only.

159 In the event of a breakdown Fitting a wheel

F Remove the bolts and keep them in a clean place. F Remove the wheel.

Stowing the damaged wheel The damaged wheel can be stowed under the floor, in the standard spare wheel housing. To stow an alloy wheel, first remove the trim from the middle of the wheel so that the fastening device (nut and bolt) can be Fitting the "space-saver" spare wheel If your vehicle is fitted with alloy wheels, F Extend the jack 2 until its head comes put in place. when tightening the bolts on fitting, it is into contact with the jacking point A or B, In the case of a "space-saver" type spare normal to notice that the washers do not whichever is used; the contact area A or B wheel, the damaged wheel cannot be come into contact with the "space-saver" on the vehicle must be correctly inserted stowed under the floor. It must be stowed spare wheel. The wheel is secured by the into the central part of the head of the jack. in the boot; use a cover to protect the conical contact of each bolt. F Lift the vehicle until there is a sufficient inside of the boot. space between the wheel and the ground to mount the spare (not punctured) wheel easily.

160 In the event of a breakdown

F Pre-tighten the other bolts using the After changing a wheel Changing a bulb wheelbrace 1 only. Do not exceed 50 mph (80 km/h) when driving with the "space-saver" type spare The headlamps have polycarbonate wheel fitted. lenses with a protective coating: Visit a CITROËN dealer or a qualified F do not clean them using a dry or workshop as soon as possible to have the abrasive cloth, nor with a detergent tightness of the bolts and the pressure of or solvent product, the spare wheel checked. F use a sponge and soapy water or a pH Have the punctured wheel checked. After neutral product, inspection, the technician will let you know F when using a high pressure washer if the tyre can be repaired or if it must be on persistent marks, do not keep the replaced. lance directed towards the lamps or their edges for too long, so as not to F Lower the vehicle fully. damage their protective coating and List of operations F Fold jack 2 and detach it. seals.

Changing a bulb must only be done with the ignition off and after the lamp has been switched off for several minutes – Risk of serious burns! F Do not touch the bulb directly with your fingers, use a lint-free cloth. It is essential only to use anti-ultraviolet (UV) type bulbs, so as not to damage the F Put the wheel in place on the hub. F If your vehicle is so equipped, tighten the headlamp. 8 F Screw in the bolts fully by hand. security bolt using the wheelbrace 1 fitted Always replace a failed bulb with a new F If your vehicle is so equipped, pre-tighten with the security socket 5. bulb with the same type and specification. the security bolt using the wheelbrace 1 F Tighten the other bolts using the fitted with the security socket 5. wheelbrace 1 only. F Stow the tools in their box.

161 In the event of a breakdown

Light-emitting diodes (LED) Daytime running lamps/ For the replacement of this type of bulb, sidelamps (LEDs) you must contact a CITROËN dealer or a qualified workshop.

In some weather conditions (e.g. low temperature or humidity), the presence of misting on the internal surface of the glass of the headlamps and rear lamps is F Disconnect the bulb connector. normal; it disappears after the lamps have For the replacement of the light-emitting diodes F Pull the bulb out and change it. been on for a few minutes. (LED), contact a CITROËN dealer or a qualified workshop. To refit, perform these operations in reverse order, turning the bulb's positioning lug Front lamps Dipped beam headlamps upwards.

Main beam headlamps

F Remove the protective cover by pulling the 1. Daytime running lamps/sidelamps (LED). tab. 2. Dipped beam headlamps (H7). F Take the connector and bulb holder, then lift F Remove the protective cover by pulling the tab. 3. Main beam headlamps (H1). the assembly upwards to unclip it. F Remove the assembly of connector and F Disconnect the bulb connector (do not 4. Direction indicators (PY21W). bulb holder. remove the earth connector located below). 5. Foglamps (PS24W). 162 In the event of a breakdown

F Push on the spring, then move it towards F Remove the bulb holder by squeezing the Amber colour bulbs, such as the direction the middle of the vehicle to release the bulb. two clips (top and bottom) with the thumb indicators, must be replaced by bulbs with F Pull the bulb out and change it. and forefinger. identical colour and specifications. F Replace the module (bulb holder and bulb). To refit, carry out these operations in reverse order. To refit, carry out these operations in reverse Direction indicators Foglamps order.

You can also contact a CITROËN dealer or a qualified workshop for the replacement of these bulbs.

Integrated direction indicator F Below the front bumper, unscrew the three side repeaters wheel arch liner fixing screws. F Move the wheel arch aside to allow access to the front foglamp. F Disconnect the connector from the bulb Quicker flashing of the direction indicator holder by pressing on its tab, located at the lamp (left or right) indicates the failure of top. one of the bulbs on the corresponding side. For the replacement of these bulbs, contact a CITROËN dealer or a qualified workshop. F Turn the bulb holder an eighth of a turn anti- clockwise and extract it. 8 F Remove the bulb and replace it.

To refit, carry out these operations in reverse order.

163 In the event of a breakdown Rear lamps

1. Brake lamps (P21W). 2. Foglamp(s) (LED). 3. Sidelamps (LED). 4. Reversing lamps (W16W). 5. Direction indicators (PY21W).

F Remove the side trim to access the lamp Changing bulbs mountings. These bulbs are changed from inside the boot. F Disconnect the lamp unit connector A by F Open the boot. pressing the release button (located under the connector for the right-hand side and above the connector for the left-hand side). F Unscrew the nut B and remove it (ensure it does not fall inside the wing). F Press down on the retaining tab of lamp unit C, then carefully remove it towards the F Spread the retaining tabs of the bulb holder outside. apart and remove it. F Disconnect the sidelamp connector D and remove the bulb holder. F Replace the faulty bulb: - for the reversing lamp, pull the bulb (lower),

164 In the event of a breakdown

- for the other lamps, press gently from the Third brake lamp (LED) F Push it outwards to unclip it. top and turn the corresponding bulb a F Remove the lens. quarter turn anti-clockwise. F Change the faulty bulb. To refit, press on the lens to clip it in place. To refit, carry out these operations in reverse order. Interior lighting Make sure the reversing lamp is connected Courtesy lamp with bulbs (W5W) properly before refitting the bulb holder. Take care to engage the lamp in its guides while remaining within the vehicle's centreline. Tighten sufficiently to ensure sealing, but without damaging the lamp.

Sidelamps (LED) and foglamps For the replacement of LEDs, contact a (LED) CITROËN dealer or a qualified workshop.

F Using a thin, flap tip screwdriver, unclip the Number plate lamps (W5W) entire console surrounding the courtesy lamp. F Pull the faulty bulb out and change it. F Put in place the console around the courtesy lamp and clip it correctly.

For the replacement of LEDs, contact a Courtesy lamp with LED 8 CITROËN dealer or a qualified workshop. For the replacement of LEDs, contact a CITROËN dealer or a qualified workshop. F Insert a thin screwdriver into one of the cut- outs in the lens. 165 In the event of a breakdown

Boot (W5W) F the vehicle must be immobilised with the ignition off, F identify the faulty fuse using the existing allocation tables and diagrams.

To remove or fit a fuse, it is essential to: F use the special tweezers to extract the fuse from its housing and check the condition of its filament. F always replace the failed fuse with a fuse of the same rating (same colour); using a different rating could cause faults (risk of fire). F Unclip the lamp by pushing the base from If the fault recurs after replacing a fuse, have behind. the electrical system checked by a CITROËN F Pull the bulb out and replace it. dealer or a qualified workshop. F Refit the lamp back in place.

Changing a fuse F Unclip the cover by pulling at the top left, then right. Access to the tools F Disengage the cover completely and turn it over. The extraction tweezers are fitted to the back F Remove the tweezers from the back of the of the dashboard fusebox cover. cover. Good Failed Changing a fuse Before changing a fuse: F the cause of the failure must be identified and rectified, F all electrical consumers must be switched Tweezers off, 166 In the event of a breakdown

Replacement of a fuse not shown in Fuses in the dashboard Left-hand fusebox the allocation tables below may cause The 2 fuseboxes are located in the lower part of a serious malfunction of your vehicle. the dashboard, underneath the steering wheel Contact a CITROËN dealer or a qualified for left-hand drive vehicles or underneath the workshop. glove box for right-hand drive vehicles.

Installing electrical accessories Your vehicle's electrical system is Access to the fuses designed to operate with standard or F Unclip the cover by pulling at the top left, optional equipment. then right. Before installing other electrical equipment or accessories on your vehicle, contact a CITROËN dealer or a qualified workshop to verify that they are compatible.

CITROËN accepts no responsibility for the cost incurred in repairing your vehicle or for rectifying malfunctions resulting from the installation of accessories not supplied and not recommended by CITROËN and not installed in accordance with specifications, in particular when the combined power consumption of all of the additional equipment connected exceeds 10 milliamperes. 8

167 In the event of a breakdown

Fuse Rating Functions No. (A)

F1 10 Door mirrors (electric adjustment).

F4 15 Horn.

F6 20 Front and rear screenwash.

F8 20 Rear wiper.

F10 30 Locks.

F27 5 Alarm (pre-equipment).

F29 20 Touch screen.

F31 15 Radio.

F32 15 12 volt socket.

F35 5 Headlamp height adjustment, Grip control.

F36 5 Courtesy lamp, map reading lamps.

168 In the event of a breakdown

Right-hand fusebox Fuse Rating Functions No. (A)

F30 30 Heated rear screen.

F31 10 Heated mirrors.

F34 25 Trailer interface unit.

F35 20 Trailer interface unit.

F36 30 Front one-touch electric windows.

F37 30 Front heated seats.

169 In the event of a breakdown

Fuses in the engine Fuse Rating Functions compartment No. (A)

F1 40 Air conditioning.

F16 15 Front foglamps.

F18 10 Right-hand main beam headlamp.

F19 10 Left-hand main beam headlamp.

F29 40 Windscreen wipers. The fusebox is placed in the engine compartment near the battery.

Access to the fuses F Unclip the cover. F Change the fuse. F When you have finished, close the cover very carefully to ensure correct sealing of the fusebox.

170 In the event of a breakdown

12 V battery Access to the battery Never try to start the engine by connecting a battery charger. Procedure for starting the engine using another The battery is located under the bonnet. Never use a 24 V or higher battery battery or charging a discharged battery. booster. Check beforehand that the backup battery has a nominal voltage of 12 V and a capacity at least equal to that of the Lead-acid starter batteries discharged battery. The two vehicles must not be in contact Batteries contain harmful substances with each other. such as sulphuric acid and lead. Switch off all the electrical consumers They must be disposed of in For access to the (+) terminal: on both vehicles (audio system, wipers, accordance with regulations and must F release the bonnet using the interior lever, lighting, etc.). not, in any circumstances, be discarded then the exterior safety catch, Make sure that the jump leads are not with household waste. F lift the bonnet, then fix it in place with its close to moving parts of the engine (fan, Take used remote control batteries and stay. belts, etc.). vehicle batteries to a special collection Do not disconnect the (+) terminal while point. (+) Positive terminal. the engine is running. It has a quick-release clamp.

Protect your eyes and face before (-) Negative terminal. handling the battery. The negative terminal is not accessible, use the All operations on the battery must be engine mounting. carried out in a well ventilated area and away from naked flames and sources of Starting using another sparks, so as to avoid the risk of explosion or fire. battery Wash your hands afterwards. When your vehicle's battery is flat, the engine 8 can be started using a backup battery (external or from another vehicle) and jump leads or a battery booster.

171 In the event of a breakdown

F Lift the plastic cover on the (+) terminal, if Some functions, including Stop & Start, It is not necessary to disconnect the your vehicle has one. are not available if the battery is not battery. F Connect the red cable to the positive sufficiently charged. terminal (+) of the flat battery A (at the metal elbow) then to the positive terminal (+) of the F Switch off the ignition. backup battery B or the booster. F Switch off all electrical consumers (audio F Connect one end of the green or black system, lamps, wipers, etc.). cable to the negative terminal (-) of the Charging the battery using backup battery B or the booster (or an earth a battery charger point on the other vehicle). For optimum service life of the battery, it is F Connect the other end of the green or black essential to maintain an adequate state of cable to the earth point on the broken- C charge. down vehicle. In some circumstances it may be necessary to F Start the engine of the vehicle with the charge the battery: good battery and leave it running for a few - if you use your vehicle mostly for short minutes. journeys, F Start the engine on the broken-down vehicle - if the vehicle is to be taken off the road for and let it run. several weeks. If the engine does not start straight away, Contact a CITROËN dealer or a qualified switch off the ignition and wait a few moments workshop. before trying again. F Wait until the engine returns to idle then If you plan to charge your vehicle's battery F Switch off the charger B before connecting disconnect the jump lead cables in the yourself, use only a charger compatible the cables to the battery, so as to avoid any reverse order. with lead-acid batteries with a nominal F dangerous sparks. Refit the plastic cover to the (+) terminal, if voltage of 12 V. your vehicle has one. F Ensure that the charger cables are in good F Allow the engine to run for at least condition. 30 minutes, by driving or with the vehicle F Raise the plastic cover, if your vehicle has stationary, so that the battery reaches an Follow the instructions provided by the one, on the (+) terminal. adequate state of charge. manufacturer of the charger. F Connect the charger B cables as follows: Never reverse polarities. - the positive (+) red cable to the (+) terminal of the battery A, - the negative (-) black cable to the earth point C on the vehicle. 172 In the event of a breakdown

F Once the battery is charged, switch off the Before disconnecting the battery: Reconnecting the (+) terminal charger B before disconnecting the cables F close all openings (doors, tailgate, windows, from the battery A. sunroof), F switch off all electrical consumers (audio system, wipers, lighting, etc.), F switch off the ignition and wait for four minutes. At the battery, it is only necessary to disconnect the (+) terminal. If this label is present, it is essential to use only a 12 V charger to avoid causing irreversible damage to the electrical components related to the Stop & Start Quick-release terminal clamp F Raise the lever A fully. system. F Disconnecting the (+) terminal Refit the open clamp B on the (+) terminal. F Push the clamp B fully down. F Lower the lever A to lock the clamp B. Never try to charge a frozen battery – risk of explosion! If the battery has frozen, have it checked by a CITROËN dealer or by a qualified Do not force the lever as locking will not workshop who will check that the internal be possible if the clamp is not positioned components have not been damaged and correctly; start the procedure again. that the container has not cracked, which would mean a risk of toxic and corrosive acid leaking. After reconnecting the battery F Raise the lever A fully to release the clamp B. After reconnecting the battery, turn on the Disconnecting the battery F Remove the clamp B by lifting it off. ignition and wait 1 minute before starting 8 In order to maintain an adequate state the engine, in order to enable the electronic of charge for starting the engine, it is systems to initialise. recommended that the battery be disconnected If minor problems nevertheless persist if the vehicle is taken out of service for a long following this operation, contact a CITROËN period. dealer or a qualified workshop. 173 In the event of a breakdown

You must reinitialise certain systems yourself, General recommendations by referring to the corresponding section, such Towing Observe the legislation in force in the as: Procedure for having your vehicle towed or for country where you drive. - the remote control or electronic key towing another vehicle using the towing eye. Ensure that the weight of the towing (depending on version), vehicle is higher than that of the towed - the electric windows, vehicle. - the date and time, Access to tools The driver must remain at the wheel of - the radio preset stations. the towed vehicle and must have a valid driving licence. The Stop & Start system may not be When towing a vehicle with all four wheels operational during the trip following the on the ground, always use an approved first engine start. towbar; rope and straps are prohibited. In this case, the system will only be The towing vehicle must move off gently. available again after a continuous When the vehicle is towed with its engine period of immobilisation of the vehicle, off, there is no longer braking and steering a period which depends on the exterior assistance. In the following cases, you must always temperature and the state of charge of the The towing eye is installed in the boot under call on a professional recovery service: battery (up to about 8 hours). the floor. - vehicle broken down on a motorway or To access it: a main road, F open the boot, - four-wheel drive vehicle, F lift the floor and remove it, - when it is not possible to put the F remove the towing eye from the holder. gearbox into neutral, unlock the steering, or release the parking brake, - when it is not possible to tow a vehicle with an automatic gearbox, with the engine running, - towing with only two wheels on the ground, - where there is no approved towbar available, etc.

174 In the event of a breakdown Towing your vehicle F Move off gently, drive slowly and for a short distance.

Towing another vehicle

F On the front bumper, unclip the cover by pressing at the bottom. F Screw the towing eye in fully. F Install the towbar. F On the rear bumper, unclip the cover by F With a manual gearbox, move the gear lever pressing at the bottom. into neutral. F Screw the towing eye in fully. F With an automatic or electronic gearbox, F Install the towbar. place the gear selector in position N. F Switch on the hazard warning lamps on both vehicles. F Move off gently, drive slowly and for a short distance.

Failure to observe this instruction could result in damage to certain components (braking, transmission, etc.) and the absence of braking assistance the next time the engine is started. 8

F Unlock the steering and release the parking brake. F Switch on the hazard warning lamps on both vehicles. 175 Technical data

The GTW (Gross Train Weight) and towed load Engine technical data values indicated are valid up to a maximum and towed loads altitude of 1,000 metres. The towed load value must be reduced by 10% for each additional Engines 1,000 metres of altitude. The maximum authorised nose weight The engine specifications (cubic capacity, corresponds to the weight permitted on the max. power, max. speed, energy, CO 2 towbar. emissions, etc.) for your vehicle are given in the registration document and in the sales literature. These characteristics correspond to the values When exterior temperatures are high, the type-approved on a test bed, under conditions vehicle performance may be limited in defined in European legislation (Directive order to protect the engine. If the exterior 1999/99/EC). temperature is above 37°C, limit the towed For more information, contact a CITROËN load. dealer or a qualified workshop.

Towing using a lightly loaded vehicle can Weights and towed loads adversely affect roadholding. The maximum weights and towed loads for Braking distances are increased when your vehicle are given in the registration towing a trailer. document, as well as in sales brochures. When using a vehicle to tow, never exceed a speed of 62 mph (100 km/h) (observe These values are also given on the the local legislation in force). manufacturer's plate or label. For more information, contact a CITROËN dealer or a qualified workshop. If the exterior temperature is high, it is recommended that the engine be allowed to idle for 1 to 2 minutes after the vehicle comes to a stop, to facilitate its cooling.

176 Technical data Engines and towed loads – Petrol

PureTech 130 Engine PureTech 82 PureTech 110 S&S S&S

5-speed 5-speed 5-speed 6-speed 6-speed automatic Gearbox manual manual manual manual (EAT6) (BVM5) (BVM5) (BVM5) (BVM6)

EB2DTM - EB2DTS - Code EB2F - MA EB2DT - BE EB2DTM - BE EB2DT - AT6 AT6 MCM

Model codes 0PHMW 0PHNZ/B 0PHNV/B 0PHNZ/W 0PHNV/W 0PHNY/HC1

Cubic capacity (cm3) 1,199 1,199 1,199 1,199 1,199 1,199

Max power: EC standard (kW) 60 81 81 81 81 96

Fuel Unleaded Unleaded Unleaded Unleaded Unleaded Unleaded

Braked trailer (within the GTW limit) on a 10% or 780 950 450 920 450 900 12% slope (kg)

Unbraked trailer (kg) 540 550 560 570 570 560

Maximum authorised nose weight (kg) 55 55 55 55 55 55

177 Technical data Engines and towed loads – Diesel

Engine BlueHDi 100 BlueHDi 100 S&S

5-speed manual 5-speed manual 6-speed electronic Gearbox (BVM5) (BVM5) (ETG6)

Code DV6FD - BE DV6FD - BE DV6FD - MCP

Model codes 0BBHY 0BBHY

Cubic capacity (cm3) 1,560 1,560

Max power: EC standard (kW) 73 73

Fuel Diesel Diesel

Braked trailer (within the GTW limit) on a 10 or 950 950 950 12% slope (kg)

Unbraked trailer (kg) 575 575 615

Maximum authorised nose weight (kg) 55 55 55

178 Technical data Dimensions (in mm) Identification markings These dimensions have been measured on an Various visible markings for identifying and unladen vehicle. searching for information on your vehicle.

A. Vehicle identification number (V.I.N.), under the bonnet. This number is engraved on the chassis near the right-hand front wheel arch.

B. Vehicle identification number (V.I.N.), on the windscreen lower cross member. This number is indicated on a self-adhesive 9 * Version with longitudinal bars. label which is visible through the windscreen.

179 Technical data

C. Manufacturer's label. The vehicle may be originally equipped This tamperproof label on the middle door pillar, right or left-hand side, contains the with tyres with higher load and speed following information: indices than those indicated on the label, - the name of the manufacturer, without affecting inflation pressure. - the European Whole Vehicle Type Approval number, - the vehicle identification number (V.I.N.), - the maximum authorised weight (gross Checking tyre pressures vehicle weight), The tyre pressures should be checked when - the maximum authorised weight with trailer (gross train weight), cold at least monthly. - the maximum front axle weight, The pressures given on the label are valid for - the maximum rear axle weight. cold tyres. If you have driven for more than 10 minutes or more than 6 miles (10 kilometres) D. Tyre/paint label. at more than 31 mph (50 km/h), the tyres will be warm; in this case 0.3 bar (30 kPa) should be added to the pressures given on the label.

Never reduce the pressure of a warm tyre.

This label on the middle door pillar, driver's side, contains the following information: - the tyre pressures, unloaded and loaded, Low tyre pressures increase fuel - the tyre sizes (including the load index and consumption. speed rating for the tyre), - the spare tyre inflation pressure, - the paint colour code.

180 CITROËN Connect Nav

CITROËN Connect Nav The different functions and settings described vary according to the version and configuration of your vehicle.

As a safety measure and because it requires sustained attention by the driver, the pairing of a Bluetooth mobile telephone with the Bluetooth hands-free system of your audio system must be done with the vehicle stationary and the ignition on.

The system is protected in such a way that it will only operate in your vehicle. The display of the message Energy Economy Mode signals that a change to standby is imminent. GPS satellite navigation – Contents First steps 2 Applications – Multimedia Steering mounted controls 3 ® The link below gives access to OSS (Open audio system – Bluetooth Menus 4 Source Software) codes for the system. Voice commands 5 telephone https://www.groupe-psa.com/fr/oss/ Navigation 13 Connected navigation 15 https://www.groupe-psa.com/en/oss/ Applications 18 Radio 23 DAB radio (Digital Audio Broadcasting) 24 Media 25 Telephone 27 Settings 31 Frequently asked questions 33 . 1 CITROËN Connect Nav

First steps The touch screen is of the "capacitive" type. With the engine running, a press To clean the screen, use a soft, non- mutes the sound. abrasive cloth (e.g. spectacles cloth) with With the ignition off, a press turns no additional cleaning product. the system on. Do not use sharp objects on the screen. Increase or decrease the volume using Do not touch the screen with wet hands. the wheel or the "plus" or "minus" buttons (depending on the equipment). Use the menu buttons on either side of or Certain information is displayed permanently below the touch screen for access to the in the side bars or in the upper bar of the touch menus, then press the virtual buttons in the screen (depending on equipment): touch screen. - Reminder of the air conditioning information (depending on version), and direct access to Selecting the sound source (depending on Depending on the model, use the "Source" the corresponding menu. equipment): or "Menu" buttons to access the menus, then - Go directly to the selection of the audio - FM/DAB/AM radio stations (depending on press the virtual buttons in the touch screen. source, to the list of radio stations (or list of equipment). titles depending on the source). - Telephone connected via Bluetooth and - Go to the "Notifications" of messages, You can display the menus at any time by Bluetooth multimedia broadcast (streaming). emails, map updates and, depending on the pressing the screen briefly with three fingers. - USB memory stick. services, the navigation notifications. - Media player connected via the auxiliary - Go to the settings for the touch screen and socket (depending on equipment). All of the touch areas of the screen are white. the digital instrument panel. Press the back arrow to go back a level. - CD Player (depending on equipment). Press "OK" to confirm. - Video (depending on equipment).

2 CITROËN Connect Nav

Telephone (short press): start Steering mounted controls telephone call. Voice commands: Call in progress (short press): This control is located on the access telephone menu. steering wheel or at the end of the Telephone (long press): reject an lighting control stalk (depending on incoming call, end call; when no call equipment). is in progress, access telephone Short press, system voice menu. commands. Radio (rotate): automatic search for Long press, smartphone voice the previous/next station. commands via the system. Media (rotate): previous/next track, In the "Settings" menu you can create move through a list. a profile for just one person or a group Increase volume. Short press: confirm a selection; if of people with shared interests, with nothing selected, access to presets. the possibility of entering multiple Mute/Restore the sound (depending settings (radio presets, audio settings, on equipment). navigation history, contact favourites, Or etc.); these settings are taken into account Mute by pressing the volume automatically. increase and decrease buttons Radio: display the list of stations. simultaneously (depending on Media: display the list of tracks. equipment). Radio (press and hold): update the Restore the sound by pressing one list of stations received. In very hot conditions, the volume may of the two volume buttons. be limited to protect the system. It may go into standby (screen and sound off) for at Decrease volume. least 5 minutes The return to normal takes place when Media (short press): change the the temperature in the passenger multimedia source. compartment has dropped. . 3 CITROËN Connect Nav Menus Telephone Connected navigation Depending on equipment/Depending on version. ® Depending on equipment/Depending on version. Connect a telephone via Bluetooth , read messages and emails and send Enter navigation settings and quick messages. choose a destination. Use services available in real time, depending on equipment.

Radio Media Depending on equipment/Depending on version. Select an audio source, a radio station, display photographs.

Settings Depending on equipment/Depending on version. Applications FM 87.5 MHz Configure a personal profile and/ Depending on equipment/Depending on version. or configure the sound (balance, Operate certain applications on ambience, etc.) and the display a smartphone connected via (language, units, date, time, etc.). CarPlay®, MirrorLinkTM (available depending on the country) or Android Auto. Check the state of the Bluetooth® and Wi-Fi connections.

4 CITROËN Connect Nav

Air conditioning To ensure that voice commands are Depending on equipment/Depending on version. always recognised by the system, please observe the following recommendations: Manage the different temperature - speak natural language in a normal and air flow settings. tone without breaking up words or raising your voice. - always wait for the "beep" (audible signal) before speaking. - for optimum operation, it is recommended that the windows and 18,5 21,5 sunroof be closed to avoid exterior Vehicle interference (depending on version), Depending on equipment/Depending on - before making a voice command, ask version. other passengers not to speak. Activate, deactivate or configure certain vehicle functions.

Voice commands Steering mounted controls First steps Example of a "voice command" for Pressing this button activates the navigation: voice commands function. "Navigate to address 11 Regent Street, London" Example of a "voice command" for the radio and media: "Play artist Madonna" Example of a "voice command" for the telephone: "Call David" . 5 CITROËN Connect Nav

When the voice commands are The voice commands, with a choice of Information – Using the system activated, by briefly pressing the 17 languages (Arabic, Brazilian, Czech, button, help is displayed on the Danish, Dutch, English, Farsi, French, Press the Push To Talk voice touch screen, offering various German, Italian, Norwegian, Polish, command button and tell me menus and allowing you to interact Portuguese, Russian, Spanish, Swedish, what you'd like after the tone. with system by voice. Turkish), are made using the language Remember you can interrupt previously chosen and set in the system. me at any time by pressing For some voice commands, there are this button. If you press it alternative synonyms. again while I'm waiting for Example: Guide to/Navigate to/Go to/... you to speak, it'll end the The voice commands in Arabic for: conversation. If you need to "Navigate to address" and "Display POI in interrupt the action in progress, the city" are not available. say "cancel". If you want to undo something and start over, say "undo". To get information and tips at any time, just say "help". If you ask me to do Upon selecting a menu item you have a choice something and there's some of commands. information missing that I need, I'll give you some examples or take you through it step by step. There's more information available in "beginner" mode. You can set the dialogue mode to "expert" when you feel comfortable.

6 CITROËN Connect Nav

Global voice commands Voice commands Help messages

These commands can be made from any There are lots of topics I can help you with. screen page after pressing the "Voice You can say: "help with phone", "help with commands" button located on the steering navigation", "help with media" or "help wheel, as long as there is no telephone with radio". For an overview on how to use call in progress. voice controls, you can say "help with voice controls".

Say "yes" if I got that right. Otherwise, say "no" and we'll start that again. Set dialogue mode as novice – expert

Select user 1/Select profile John

Increase temperature

Decrease temperature

. 7 CITROËN Connect Nav "Navigation" voice commands

These commands can be made from any screen page after pressing the "Voice commands" button located on the steering wheel, as long as there is no telephone call in progress.

Voice commands Help messages

Navigate home To plan a route, say "navigate to" followed by the address, the contact name or an intersection. For example, "navigate to address 11 Regent Street, London", "navigate to contact, John Miller", or Navigate to work "navigate to intersection of Regent Street, London". You can specify if it’s a preferred address, or a Point of Interest. For example, say "navigate to preferred address, Tennis club", or "navigate to POI Navigate to preferred address, Tennis club Heathrow Airport in London". Or, you can just say, "navigate home". To see Points of Interest on a map, you can say things like "show POI hotels in Banbury". For more information say "help with Navigate to contact, John Miller points of interest" or "help with route guidance". To choose a destination, say something like "navigate to line three" or "select line two". If you can’t Navigate to address 11 regent street, find the destination but the street’s right, say for example "select the street in line three". To move London around a displayed list, you can say "next page" or "previous page". You can undo your last action and start over by saying "undo", or say "cancel" to cancel the current action.

Tell me the remaining distance You can say "stop" or "resume route guidance". To get information about your current route, you can say "tell me the remaining time", "remaining distance" or "arrival time". To learn more Tell me the remaining time commands, try saying "help with navigation". Tell me the arrival time

Stop route guidance

8 CITROËN Connect Nav

Show POI ''hotel'' at the destination To see points of interest on a map, you can say things like "show hotels in Banbury", "show nearby parking", "show hotel at the destination" or "show petrol station along the route". If you prefer to navigate directly to a point of interest, you can say "navigate to nearby petrol station". If you feel Show nearby POI petrol station'' you are not being well understood, try to say the word "POI" in front of the point of interest. For example say "navigate to POI restaurant at the destination". Navigate to POI Heathrow Airport in To choose a POI, say something like "select line 2". If you’ve searched for a Point of Interest London and don’t see the one you’re after, you can filter further by saying something like "select POI in line 2", or "select the city in line 3". You can also scroll through the list by saying "next page" or Navigate to POI petrol station along the "previous page". route

Depending on the country, give the destination instructions (address) in the language used by the system.

. 9 CITROËN Connect Nav "Radio Media" voice commands

These commands can be made from any screen page after pressing the "Voice commands" button located on the steering wheel, as long as there is no telephone call in progress.

Voice commands Help messages

Turn on source radio - Streaming You can select an audio source by saying "turn on source" followed by the device name. For Bluetooth – … example, "turn on source, Streaming Bluetooth", or "turn on source, radio". Use the command "play" to specify the type of music you’d like to hear. You can choose between "song", "artist", or "album". Just say something like "play artist, Madonna", "play song, Hey Jude", or "play album, Thriller".

Tune to channel BBC Radio 2 You can pick a radio station by saying "tune to" and the station name or frequency. For example "tune to channel Talksport" or "tune to 98.5 FM". To listen to a preset radio station, say for example Tune to 98.5 FM "tune to preset number five". Tune to preset number five

What's playing? To choose what you’d like to play, start by saying "play" and then the item. For example, say "play song Hey Jude", "play line 3" or "select line 2". You can undo your last action and start over by saying "undo", or say "cancel" to cancel the current action.

Play song Hey Jude I’m not sure what you’d like to play. Please say "play" and then a song title, an album title, or an artist name. For example, say "play song Hey Jude", "play artist Madonna" or "play album Thriller". Play artist Madonna To select a line number from the display, say "select line two". To move around a displayed list, you can say "next page" or "previous page". You can undo your last action and start over by saying Play album Thriller "undo", or say "cancel" to cancel the current action.

Media voice commands are available only for a USB connection.

10 CITROËN Connect Nav

"Telephone" voice Voice commands Help messages commands

These commands can be made from any Call David Miller'' To make a phone call, say "call" followed by screen page after pressing the "Voice the contact name, for example: "Call David commands" button located on the steering Call voicemail* Miller". You can also include the phone type, wheel, as long as there is no telephone for example: "Call David Miller at home". To call in progress. Display calls* make a call by number, say "dial" followed by If there is no telephone connected by the phone number, for example, "Dial 107776 Bluetooth, a voice message announces: 835 417". You can check your voicemail by "Please first connect a telephone", and the saying "call voicemail". To send a text, say voice session will be closed. "send quick message to", followed by the contact, and then the name of the quick message you’d like to send. For example, "send quick message to David Miller, I’ll be late". To display the list of calls, say "display calls". For more information on SMS, you can say "help with texting". To choose a contact, say something like "select line three". To move around the list say "next page" or "previous page". You can undo your last action and start over by saying "undo", or say "cancel" to cancel the current action.

* This function is available only if the telephone connected to the system supports downloading of contacts and recent calls and if the download has been done. . 11 CITROËN Connect Nav

"Text message" voice Voice commands Help messages commands

These commands can be made from any Send quick message to Bill Carter, I'll From the list of quick messages, say the screen page after pressing the "Voice be late name of the one you’d like to send. To move commands" button located on the steering around the list you can say "go to start", "go to wheel, as long as there is no telephone end", "next page" or "previous page". You can call in progress. undo your last action and start over by saying If there is no telephone connected by "undo", or say "cancel" to cancel the current Bluetooth, a voice message announces: action. "Please first connect a telephone", and the voice session will be closed. Send SMS to John Miller, I'm just arriving Please say "call" or "send quick message to", and then select a line from the list. To move Send SMS to David Miller at the office, around a list shown on the display, you can don't wait for me say "go to start", "go to end", "next page" or "previous page". You can undo your last The voice commands function "Text action and start over by saying "undo", or say messages" allows you to dictate and send "cancel" to cancel the current action. an SMS. Dictate your text taking care to make a short pause between each word. Listen to most recent message* To hear your last message, you can say At the end of the operation, the voice "listen to most recent message". When you recognition system will automatically want to send a text, there’s a set of quick create an SMS. messages ready for you to use. Just use the quick message name and say something like "send quick message to Bill Carter, I’ll be late". Check the phone menu for the names of the supported messages.

* This function is available only if the telephone connected to the system supports The system only sends pre-recorded downloading of contacts and recent calls "Quick messages". and if the download has been done. 12 CITROËN Connect Nav

Navigation In order to be able to use the navigation, To "My home" or "My work" it is necessary to fill in the "City", the Choice of a destination "Street" and the "Number" on the virtual keyboard or take it from the Press Navigation to display the To a new destination list in "Contact" or in the "History" of primary page. addresses. Press Navigation to display the Press the "MENU" button to go to the primary page. secondary page. Without confirmation of the street number, Press the "MENU" button to go to the you will be guided to one end of the street. Select "My destinations". secondary page.

Select "Enter address". Select the "Preferred" tab. To a recent destination Select "My home". Select the "Country". Press Navigation to display the primary page. Or Enter the "City", the "Street" Press the "MENU" button to go to the Select "My work". and the "Number" and confirm secondary page. by pressing on the suggestions displayed. Select "My destinations". Or Press "OK" to select the "Guidance criteria". Select a preset favourite destination. Select the "Recent" tab. And/Or Select the address chosen in the list to display Select "See on map" to select the the "Guidance criteria. To a contact in the "Guidance criteria". directory Press "OK" to start navigation. Press Navigation to display the Press "OK" to start navigation. primary page.

Select "Position" to visualise the arrival Press the "MENU" button to go to the Zoom out/zoom in using the touch buttons point geographically. or with two fingers on the screen. secondary page. . 13 CITROËN Connect Nav

Select "My destinations". Press "OK" to start calculation of Explore the map by sliding a finger on the the route. screen. Touch the screen with a finger to go to the next image. Select the "Contact" tab. To a point on the map Press this button to display the world Select a contact in the list to start navigation. Press Navigation to display the map. primary page. Using the grid, select by zoom the desired country or region. Explore the map by sliding a finger on the To points of interest (POI) screen. Press this button to display or enter Points of Interest (POI) are listed in different Select the destination by pressing on the map. the GPS coordinates. categories. Tap the screen to place a marker Press Navigation to display the A marker is displayed in the middle and display the sub-menu. primary page. of the screen, with the "Latitude" and "Longitude" coordinates. Press the "MENU" button to go to the Press this button to start navigation. secondary page. Choose the type of coordinates: Select "Points of interest". DMS for: Degrees, Minutes, Seconds. Or DD for: Degrees, Decimals.

Press this button to save the Press this button to start navigation. address displayed. Select the "Travel", or "Leisure" or "Commercial" or "Public" or "Geographic" tab. Or A long press on an item opens a list of POIs nearby. Press this button to save the Or address displayed. Select "Search" to enter the name and address of a POI. To GPS coordinates OR Press this button to enter the value Press Navigation to display the for "Latitude" using the virtual primary page. keypad. 14 CITROËN Connect Nav

And Network connection provided by For access to connected navigation, you Press this button to enter the value the vehicle can use the connection provided by the for "Longitude" using the virtual vehicle via the "Emergency or assistance keypad. call" services or use your smartphone as a modem. Activate and enter settings for sharing TMC (Traffic Message OR the smartphone connection. Channel) Network connection provided by the user TMC (Traffic Message Channel) messages are linked to a European For the list of eligible smartphones, go Network connection provided by standard on the broadcasting of traffic to the brand's internet website in your the vehicle information via the RDS system on FM country. The system is automatically radio, transmitting traffic information in connected to the modem included real time. for the "Emergency or assistance The TMC information is then displayed calls" services and does not require on a GPS Navigation system map and a connection provided by the user taken into account straight away during via their smartphone. navigation, so as to avoid accidents, traffic jams and closed roads. Connected navigation Network connection provided by connection the user The display of danger zones depends on USB connection the legislation in force and subscription to As a safety measure and because it the service. requires sustained attention by the driver, Connect a USB cable. using a smartphone when driving is The smartphone charges when prohibited. connected by a USB cable. All operations must be done with the Connected navigation vehicle stationary. Bluetooth connection Depending on version Activate the Bluetooth function on Depending on the equipment level of the the telephone and ensure that it is vehicle visible to all (see the "Applications" section). . 15 CITROËN Connect Nav

Wi-Fi connection Using the virtual keypad, enter the The principles and standards "Key" for the Wi-Fi network and the Select a Wi-Fi network found by the are constantly changing; for the system and connect. "Password". communication process between the Press "OK" to start the connection. smartphone and the system to work correctly, we recommend that you update the operating system of the This function is only available if it has been smartphone as well as the date and activated either via the "Notifications" or Restrictions of use: time of the smartphone and the via the "Applications" menu. - With CarPlay®, connection sharing is system. only with a Wi-Fi connection. Press "Notifications". - With MirrorLinkTM, connection sharing is only with a USB connection. Settings specific to The quality of services depends on the connected navigation Select Wi-Fi to activate it. quality of the network connection. In the "Settings" menu you can create a profile for just one person or a group OR of people with shared interests, with With the arrival of "TOMTOM the possibility of entering multiple Press Applications to display the TRAFFIC", the services are settings (radio presets, audio settings, primary page. available. navigation history, contact favourites, Press the "OPTIONS" button to go to the etc.); these settings are taken into account secondary page. The services offered with connected automatically. navigation are as follows. Select "Wi-Fi network A Connected Services pack: connection". - Weather, Press Navigation to display the - Filling stations, primary page. - Car park, Select the "Secured" or "Not - Traffic, Press the "MENU" button to go to the secured" or "Stored" tab. - POI local search. secondary page. Select a network. A Danger zone pack (option). Select "Settings".

16 CITROËN Connect Nav

Select "Map". Select the option "Type" to choose For access to connected navigation, the type of "danger zone". Activate or deactivate: you must select the option: "Authorise - "Allow declaration of danger sending information" in "Settings". Select the "Speed" option and enter zones". it using the virtual keypad. - "Guidance to final destination on foot" These settings must be made You can access the "Notifications" at any Press "OK" to save and distribute according to each profile. time in the top bar. the information.

Select "Alerts". Authorise sending Activate or deactivate "Advise of The display of danger zones depends on information car parks nearby". the legislation in force and subscription to Press Settings to display the Activate or deactivate "Filling the service. primary page. station alert".

Activate or deactivate "Risk areas Press the "OPTIONS" button to go to the Declaration of "Danger secondary page. alert". zones" Select "System settings". Next, select this button. To distribute information on the declaration of danger zones, you should Activate: "Safety zones alert" Select the "Privacy mode" tab. check the option: "Allow declaration of danger zones". Activate or deactivate: Activate: "Give an audible - "Activating privacy mode". warning" Press to display the Navigation - "Deactivating geolocation primary page. Activate or deactivate "Advise of data" POI 1 nearby". - "Deactivating privacy mode" Press the "Declare a new danger Activate or deactivate "Advise of zone" button located in the side bars POI 2 nearby". or the upper bar of the touch screen (depending on equipment). . 17 CITROËN Connect Nav "Danger zones" pack Display the weather Applications updates Press Navigation to display the Connectivity Press Settings to display the primary page. primary page. Press Applications to display the primary page. Press the "OPTIONS" button to go to the Press "Connectivity" to go to the CarPlay®, secondary page. Press this button to display the list of TM or functions. services. MirrorLink Android Auto Select "System settings".

Select "View map". ® Select the "System info" tab. CarPlay smartphone connection Select "Weather". Select "View" to display the versions As a safety measure and because it of the different modules installed in requires sustained attention by the driver, the system. Press this button to display primary using a smartphone when driving is information. prohibited. Select "Update(s) due". All operations must be done with the . Press this button to display the vehicle stationary detailed weather information. You can download the system and map updates from the Brand's website. The update procedure can also be found on the website. The temperature displayed at 6 a.m. will be the maximum temperature for the day. The temperature displayed at 6 p.m. will be the minimum temperature for the night. Once you have downloaded the updates, the installation on the vehicle must be done with the engine running and vehicle stationary.

18 CITROËN Connect Nav

Press "CarPlay" to display the The synchronisation of a personal The synchronisation of a personal CarPlay® interface. smartphone allows users to display smartphone allows users to display applications compatible with the applications adapted for the smartphone's smartphone's CarPlay® technology on the MirrorLinkTM technology on the vehicle vehicle screen when the smartphone's On connecting the USB cable, the screen. ® CarPlay function has been previously CarPlay® function deactivates the The principles and standards activated. system's Bluetooth ® mode. are constantly changing, for the As the principles and standards are communication process between the constantly changing, it is recommended smartphone and the system to operate, that you keep your smartphone's TM it is essential that the smartphone be operating system updated. MirrorLink smartphone unlocked; update the operating system For the list of eligible smartphones, go connection of the smartphone as well as the date to the brand's internet website in your Available depending on the country of sale. and time of the smartphone and the country. system. For the list of eligible smartphones, go As a safety measure and because it to the brand's internet website in your requires sustained attention by the driver, Connect a USB cable. The country. smartphone charges when using a smartphone when driving is connected by a USB cable. prohibited. All operations must be done with the As a safety measure, applications can Press on "Telephone" to display the vehicle stationary. only be viewed with the vehicle stationary; CarPlay® interface. display is interrupted once the vehicle is moving. Or Connect a USB cable. The smartphone charges when The MirrorLinkTM function requires the connected by a USB cable. use of a compatible smartphone and applications. From the system, press "Applications" to display the primary page. When connecting a smartphone to the system, it is recommended ® Press "Connectivity" to go to the CarPlay that Bluetooth® be started on the function. smartphone . 19 CITROËN Connect Nav

Connect a USB cable. The There may be a wait for the availability of As a safety measure, applications can smartphone charges when applications, depending on the quality of only be viewed with the vehicle stationary; connected by a USB cable. your network. display is interrupted once the vehicle is From the system, press moving. "Applications" to display the primary page. Android Auto smartphone The "Android Auto" function requires Press "Connectivity" to go to the MirrorLinkTM connection the use of a compatible smartphone and function. applications. As a safety measure and because it Press "MirrorLinkTM" to start the requires sustained attention by the driver, Connect a USB cable. The application in the system. using a smartphone when driving is smartphone charges when prohibited. connected by a USB cable. Depending on the smartphone, it may be All operations must be done with the necessary to activate the " TM" MirrorLink vehicle stationary. From the system, press function. "Applications" to display the During the procedure, several primary page. screen pages relating to certain The synchronisation of a personal functions are displayed. smartphone allows users to display Press "Connectivity" to go to the Android Auto Accept to start and complete the applications adapted for the smartphone's function. connection. Android Auto technology on the vehicle screen. Press "Android Auto" to start the Once the connection is established, a page The principles and standards application in the system. is displayed with the applications already are constantly changing, for the downloaded to your smartphone and adapted communication process between the During the procedure, several TM to MirrorLink technology. smartphone and the system to operate, screen pages relating to certain it is essential that the smartphone be Access to the different audio sources remains functions are displayed. unlocked; update the operating system accessible in the margin of the MirrorLinkTM Accept to start and complete the of the smartphone as well as the date display, using touch buttons in the upper bar. connection. and time of the smartphone and the Access to the menus for the system is possible system. Different audio sources remain accessible in at any time using the dedicated buttons. For the list of eligible smartphones, go the margin of the Android Auto display, using to the brand's internet website in your touch buttons in the upper bar. country.

20 CITROËN Connect Nav

Access to the menus for the system is possible Press "OK" to save and start the To complete the pairing, whichever at any time using the dedicated buttons. browser. procedure used (from the telephone or from the system), ensure that the code In Android Auto mode, the function to Connection to the internet is via one of is the same in the system and in the display the menus by pressing the screen the network connections provided by the telephone. briefly with three fingers is deactivated. vehicle or the user.

Procedure from the system ® There may be a wait for the availability of Bluetooth connection Press Applications to display the applications, depending on the quality of primary page. your network. As a safety measure and because they Press the "OPTIONS" button to go to the require prolonged attention on the part secondary page. of the driver, the operations for pairing Vehicle apps of the Bluetooth mobile telephone with Press "Bluetooth connection". the Bluetooth hands-free system of your Press Applications to display the audio system must be carried out with the primary page. vehicle stationary and the ignition on. Select "Search". Press "Vehicle Apps" to display the The list of telephones detected is applications home page. displayed. Activate the Bluetooth function on the telephone and ensure that it is "visible to If the pairing procedure fails, it is Internet Browser all" (telephone configuration). recommended that you deactivate and Press Applications to display the then reactivate the Bluetooth function in primary page. your telephone. Procedure from the telephone Press "Connectivity" to go to the "Internet Select the name of the chosen Select the system name in the list of Browser" function. telephone in the list. devices detected. Press "Internet Browser" to display the browser home page. In the system, accept the connection request Depending on the type of telephone, you Select your country of residence. from the telephone. may be asked to accept or not the transfer of your contacts and messages. . 21 CITROËN Connect Nav

Connection sharing Select "Wi-Fi network Select the "Activation" tab to activate or connection". deactivate sharing of the Wi-Fi connection. The system offers to connect the telephone with 3 profiles: And/Or - "Telephone" (hands-free kit, telephone Select the "Secured" or "Not Select the "Settings" tab to change the name only), secured" or "Stored" tab. of the system network and the password. - "Streaming" (streaming: wireless playing of the audio files on the telephone), Select a network. Press "OK" to confirm. - "Mobile internet data".

Using the virtual keypad, enter the The "Mobile internet data" profile "Key" for the Wi-Fi network and the must be activated for connected To protect against unauthorised access "Password". navigation (where the vehicle does not and to make your systems as secure as possible, the use of a complex security have "Emergency and assistance call" Press "OK" to start the connection. services), having first activated sharing of code or password is recommended. this connection on your smartphone.

The Wi-Fi connection and the sharing of the Wi-Fi connection are exclusive. Manage connections Select one or more profiles. Press Applications to display the primary page. Press "OK" to confirm. Wi-Fi connection sharing Creation of a local Wi-Fi network by the Press the "OPTIONS" button to go to the system. secondary page. Wi-Fi connection Press Applications to display the Select "Manage connection". Network connection via the smartphone's primary page. Wi-Fi. Press the "OPTIONS" button to go to the With this function you can view the access Press Applications to display the secondary page. to connected services, the availability of primary page. Select "Share Wi-Fi connection". connected services and modify the connection Press the "OPTIONS" button to go to the mode. secondary page.

22 CITROËN Connect Nav Radio Press "OK" to confirm. Activate/Deactivate the RDS Selecting a station Press Radio Media to display the primary page. Radio reception may be affected by the Press Radio Media to display the use of electrical equipment not approved primary page. Press the "OPTIONS" button to go to the by the Brand, such as a USB charger secondary page. connected to the 12 V socket. Press "Frequency". The exterior environment (hills, buildings, Select "Radio settings". Press one of the buttons for an tunnels, basement car parks, etc.) may automatic search for radio stations. block reception, including in RDS mode. This is a normal effect of the way in Select "General". which radio waves are transmitted and Activate/Deactivate "Station Or does not indicate any failure of the audio tracking". Move the cursor for a manual search equipment. for frequencies up or down. Press "OK" to confirm.

Or Presetting a station Press Radio Media to display the RDS, if activated, enables you to primary page. Select a radio station or frequency. continue listening to the same station by automatically retuning to alternative (refer to the corresponding section) frequencies. However, in certain Press the "OPTIONS" button to go to the conditions, coverage of this RDS station Press "Presets". secondary page. may not be assured throughout the entire Make a long press on one of the country as radio stations do not cover 100% of the territory. This explains the Select "Radio stations" in the buttons to preset the station. secondary page. loss of reception of a station during a journey. Press "Frequency". Changing waveband Enter the values using the virtual Press to display the keypad. Radio Media primary page. First enter the units then click on the decimals zone to enter the figures To change the waveband, press "Band…" after the decimal point. displayed at the top right of the screen. . 23 CITROËN Connect Nav Display text information Play TA messages Press Radio Media to display the primary page.

The TA (Traffic Announcement) function Press "Band…" at the top right of the screen to The "Radio Text" function allows gives priority to TA alert messages. display the DAB waveband. information transmitted by the radio To operate, this function needs good station and related to the station or the reception of a radio station that carries song playing to be displayed. this type of message. While traffic DAB-FM tracking information is being broadcast, the current media is automatically interrupted DAB does not cover 100% of the territory. Press Radio Media to display the so that the TA message can be heard. When the digital radio signal is poor, primary page. Normal play of the media previously "DAB-FM tracking" allows you to playing is resumed at the end of the continue listening to the same station, Press the "OPTIONS" button to go to the message. by automatically switching to the secondary page. corresponding FM analogue station (if there is one). Select "Radio settings". Select "Announcements". Activate/Deactivate "Traffic announcement". Select "General". Press Radio Media to display the Press "OK" to confirm. primary page. Activate/Deactivate "Display radio text". Press the "OPTIONS" button to go to the secondary page. Press "OK" to confirm. DAB (Digital Audio Broadcasting) radio Select "Radio settings".

Terrestrial Digital Radio Select "General".

Digital radio provides higher quality Activate/Deactivate "FM-DAB reception. Tracking". The various "multiplexes/ensembles" offer Activate/Deactivate "Station a choice of radio stations arranged in tracking". alphabetical order.

24 CITROËN Connect Nav

Press "OK". Insert the USB memory stick in the USB port or Connect the portable device (MP3 player, etc.) connect the USB device to the USB port using to the jack socket using an audio cable (not a suitable cable (not supplied). supplied). If "DAB-FM tracking" is activated, there First adjust the volume of your portable device is a difference of a few seconds when the To protect the system, do not use a USB (to a high level). Then adjust the volume of your system switches to FM analogue radio hub. audio system. with sometimes a variation in volume. Operation of controls is via the portable device. Once the digital signal quality is restored, The system builds playlists (in temporary the system automatically changes back memory), an operation which can take from to DAB. a few seconds to several minutes at the first CD player connection. Reduce the number of non-music files and the Depending on equipment number of folders to reduce the waiting time. Insert the CD in the player. If the DAB station being listened to is The playlists are updated every time the not available on FM ("DAB-FM" option ignition is switched off or a USB memory stick greyed out), or "DAB-FM tracking" is not is connected. The lists are memorised: if they Selecting the source activated, the sound will cut out while the are not modified, the subsequent loading time digital signal is too weak. Press Radio Media to display the will be shorter. primary page.

Select "Source". Auxiliary socket (AUX) Choose the source. Media Depending on equipment USB port Watching a video For safety reasons and because it requires the sustained attention of the driver, viewing a video is only possible when the vehicle is stationary and the ignition is switched on; as soon as This source is only available if "Auxiliary input" movement resumes, the video stops. has been checked in the audio settings. . 25 CITROËN Connect Nav

Insert a USB memory stick in the USB port. Once connected in streaming mode, the Information and advice telephone is considered to be a media Video control commands are accessible source. The system supports USB mass storage only through the touch screen. devices, BlackBerry® devices or Apple® players via USB ports. The adapter cable Press Radio Media to display the Connecting Apple® players is not supplied. primary page. Device management is done by the audio Connect the Apple® player to the USB port system controls. Select "Source". using a suitable cable (not supplied). Other peripherals, not recognised on Play starts automatically. connection, must be connected to the Select Video to start the video. auxiliary socket using a Jack cable (not Control is via the audio system. supplied) or via Bluetooth streaming, depending on compatibility. To remove the USB memory stick, The classifications available are those of press the pause button to stop the the portable device connected (artists/ video, then remove the memory albums/genres/playlists/audiobooks/ stick. podcasts). To protect the system, do not use a USB The default classification used is by hub. Bluetooth® audio streaming artists. To modify the classification used, return to the first level of the menu then Streaming allows you to listen to music from The audio equipment will only play audio files select the desired classification (playlists your smartphone. with ".wma", ".aac", ".flac", ".ogg" and ".mp3" file for example) and confirm to go down extensions and with a bitrate of between The Bluetooth profile must be activated, first through the menu to the desired track. 32 Kbps and 320 Kbps. adjust the volume on your portable device (to a It also supports VBR (Variable Bitrate) mode. high level). No other file types (.mp4, etc.) can be played. Then adjust the volume of your audio system. Files of the ".wma" type should be to the wma The version of software in the audio system If play does not start automatically, it may be 9 standard. may not be compatible with the generation of necessary to start the audio playback from the The sampling rates supported are 32, 44 and your Apple ® player. telephone. 48 kHz. Control is from the portable device or by using the system's touch buttons.

26 CITROËN Connect Nav

To avoid any playback or display issues, it is Procedure from the system advisable to create file names that have less Telephone than 20 characters and without using any ® Press Telephone to display the Pairing a Bluetooth primary page. special characters (e.g. " ? . ; ù). telephone Use only USB memory sticks in FAT32 format Press "Bluetooth search". (File Allocation Table). As a safety measure and because it requires sustained attention by the driver, the pairing of a Bluetooth mobile It is recommended that the original USB Or cable for the portable device be used. telephone with the Bluetooth hands-free system of your audio system must be Select "Search". done with the vehicle stationary and the The list of telephones detected is CD player (depending on equipment). ignition on. displayed. In order to be able to play a burned CDR or CDRW, select ISO 9660 level 1, 2 or Joliet standards if possible when burning the CD. If the pairing procedure fails, it is recommended that you deactivate and If the disc is burned in another format, it may Activate the Bluetooth function on the then reactivate the Bluetooth function in not be played correctly. telephone and ensure that it is "visible to your telephone. It is recommended that the same burning all" (telephone configuration). standard be always used on an individual disc, Select the name of the chosen with the lowest speed possible (4x maximum) telephone in the list. for the best acoustic quality. Procedure from the telephone In the particular case of a multi-session CD, the Select the system name in the list of Joliet standard is recommended. devices detected. Connection sharing The system offers to connect the telephone In the system, accept the connection request with 3 profiles: from the telephone. - "Telephone" (hands-free kit, telephone only), To complete the pairing, whichever - "Streaming" (streaming: wireless playing of procedure used (from the telephone or the audio files on the telephone), from the system), ensure that the code - "Mobile internet data". is the same in the system and in the telephone. . 27 CITROËN Connect Nav

Press the "OPTIONS" button to go to the Go to the Brand's website for more information Activation of the profile; "Mobile internet secondary page. (compatibility, additional help, etc.). data" is obligatory for connected navigation having first activated sharing of Select "Bluetooth connection" to this connection on your smartphone. display the list of paired devices. Managing paired telephones

Press the "details" button. This function allows the connection or Select one or more profiles. disconnection of a peripheral device as well as the deletion of a pairing. Press "OK" to confirm. Select one or more profiles. Press Telephone to display the primary page. Press "OK" to confirm. Depending on the type of telephone, you Press the " " button to go to the may be asked to accept or not the transfer OPTIONS secondary page. of your contacts and messages. The ability of the system to connect to just one profile depends on the telephone. Select "Bluetooth connection" to Automatic reconnection All three profiles may connect by default. display the list of paired devices.

On return to the vehicle, if the last Press on the name of the telephone telephone connected is present again, The available services depend on the chosen in the list to disconnect it. it is automatically recognised and within network, SIM card, and the devices' Press again to connect it. around 30 seconds after switching on the Bluetooth compatibility. Consult your ignition the pairing is done without any telephone's manual and your operator to action on your part, (Bluetooth activated). find out which services are available to you. Deleting a telephone To modify the connection profile: Select the basket at top right of the The profiles compatible with the system screen to display a basket alongside Press Telephone to display the are: HFP, OPP, PBAP, A2DP, AVRCP, the telephone chosen. primary page. MAP and PAN.

28 CITROËN Connect Nav Press the basket alongside the Calling a new number Calling a recently used telephone chosen to delete it. number Press Telephone to display the Press Telephone to display the Receiving a call primary page. primary page. An incoming call is announced by a ring and a Enter the phone number using the Or digital keypad. superimposed display in the screen. Make a long press

Make a short press on the steering Press "Call" to start the call. mounted telephone button to accept an incoming call. on the steering mounted button.

And Select "Calls". Make a long press Calling a contact Select the desired contact from the list offered. Press Telephone to display the primary page. on the steering mounted telephone It is always possible to make a call directly button to reject the call. Or make a long press from the telephone; as a safety measure, first park the vehicle.

Or on the steering mounted button. Select "End call" on the touch screen. Managing contacts/entries Select "Contact". Select the desired contact from the list offered. Making a call Press Telephone to display the Select "Call". primary page. Using the telephone is not recommended while driving. Select "Contact". Park the vehicle. Select "Create" to add a new Make the call using the steering mounted contact. controls. . 29 CITROËN Connect Nav

In the "Telephone" tab, enter the telephone Press "Call" to start the call. Select the "Delayed" or "My arrival" numbers for the contact. or "Not available" or "Other" tab with the possibility of creating new In the "Address" tab, enter the addresses for Press " " to hear the message. Play messages. the contact. Press "Create" to write a new In the "Email" tab, enter the email addresses message. for the contact. Access to "Messages" depends on the compatibility of the smartphone and the Select the message chosen in one The "Email" function allows email integral system. of the lists. addresses to be entered for a contact, but Depending on the smartphone, access to the system is not able to send emails. your messages or email may be slow. Press "Transfer" to select the addressee(s).

The services available depend on Managing messages the network, the SIM card and the Press "Play" to start playing the compatibility of the Bluetooth devices message. Press Telephone to display the used. primary page. Check in the manual for your smartphone Press the "OPTIONS" button to go to the and with your service provider for the Managing email secondary page. services available to you. Press Telephone to display the Select "Messages" to display the list primary page. of messages. Press the "OPTIONS" button to go to the Select the "All" or "Incoming" or Managing quick messages secondary page. "Sent" tab. Press Telephone to display the Select "Email" to display the list of Select the detail of the message primary page. messages. chosen in one of the lists. Press the "OPTIONS" button to go to the secondary page. Select the "Incoming" or "Sent" or Press " " to send a quick "Not read" tab. Answer Select "Quick messages" to display message stored in the system. the list of messages. Select the message chosen in one of the lists.

30 CITROËN Connect Nav

Press "Play" to start playing the Press Settings to display the The sound balance (or spatialisation with message. primary page. the Arkamys© system) is audio processing that allows the quality of the sound to Press the "OPTIONS" button to go to the Access to "Email" depends on the be adapted according to the number of secondary page. compatibility of the smartphone and the passengers in the vehicle. Select "Setting of the profiles". integral system. Available only with the front and rear speakers configuration.

Settings Select "Profile 1" or "Profile 2" or "Profile 3" The audio settings Ambience (6 optional or "Common profile". ambiences) and Bass, Medium and Press this button to enter a name for Audio settings Treble are different and independent for the profile using the virtual keypad. Press Settings to display the each audio source. primary page. Activate or Deactivate "Loudness". The settings for "Balance" (All Press "OK" to confirm. Select "Audio settings". passengers, Driver and Front only) are common to all sources. Activate or Deactivate "Touch tones", Press this button to add a photograph to the profile. Select "Ambience". "Volume linked to speed" and "Auxiliary input". Or Insert a USB memory stick "Balance" containing the photograph in the Onboard audio: the Sound Staging of USB port. Or Arkamys© optimises the distribution of Select the photograph. "Sound". sound in the passenger compartment. Press "OK" to accept the transfer of Or the photograph.

"Voice". Profile settings Press "OK" again to save the Or settings. As a safety measure and because it " ". Ringtone requires the sustained attention of the Press "OK" to save the settings. driver, changes to settings must only be done with the vehicle stationary. . 31 CITROËN Connect Nav

The framing for the photograph is Modifying system settings Resetting the system to "Factory Settings" square; the system reshapes the original activates English by default, as well as photograph if in another format. Fahrenheit degrees, and turns off daylight Press Settings to display the saving (summer) time. primary page.

Press this button to initialise the Press the "OPTIONS" button to go to the profile selected. secondary page. Select "System info" to display the versions of the different modules installed in the system. Select "Screen configuration". Initialisation of the profile selected activates the English language by default. Select the language Select a "Profile" (1 or 2 or 3) to associate the Select "Animation". "Audio settings" with it. Activate or deactivate: "Automatic Press Settings to display the scrolling". primary page. Select "Audio settings". Select "Brightness". Press the "OPTIONS" button to go to the Move the cursor to adjust the secondary page. Select "Ambience". brightness of the screen and/or of Select "Languages" to change the Or the instrument panel. language. "Balance" Press Settings to display the Or primary page.

"Sound". Press the "OPTIONS" button to go to the Setting the date secondary page. Or Press Settings to display the Select "System settings". "Voice". primary page.

Or Press the "OPTIONS" button to go to the "Ringtone". Select "Units" to change the units of distance, secondary page. fuel consumption and temperature. Select "Set time-date". Press "OK" to save the settings. Select "Factory settings" to return to the initial settings. 32 CITROËN Connect Nav

Select "Date". Press this button to define the time Select "Colour schemes". zone. Press this button to define the date.

Select the display format for the time (12h/24h). Select a colour scheme in the list Press " " to confirm. OK then press "OK" to confirm. Activate or deactivate summer time (+1 hour). Select the display format of the date. Activate or deactivate Every time the colour scheme is changed, synchronisation with GPS (UTC). the system restarts, temporarily displaying a black screen. Adjustment of the time and date is only Press "OK" to confirm. available if "GPS synchronisation" is deactivated. Frequently asked The system does not automatically manage Setting the time the change between winter and summer questions time (depending on the country of sale). The following information groups together the Press Settings to display the answers to the most frequently asked questions primary page. concerning your system. Press the "OPTIONS" button to go to the Colour schemes secondary page. Depending on equipment/Depending on Select "Set time-date". version.

As a safety measure, the procedure for changing the colour scheme is only Select "Time". possible when the vehicle is stationary. Press this button to adjust the time using the virtual keypad. Press Settings to display the primary page. Press "OK" to confirm. . 33 CITROËN Connect Nav

Navigation

QUESTION RESPONSE SOLUTION

The route calculation is not successful. The guidance criteria may be in conflict with Check the route settings in the "Navigation" the current location (exclusion of toll roads on menu. a toll road).

The POIs do not appear. The POIs have not been selected. Select the POIs in the list of POIs.

The audible warning of "Danger zones" does The audible warning is not active or the volume Activate the audible warning in the "Navigation" not work. is too low. menu and check the voice volume in the audio settings.

The system does not suggest a detour around The guidance criteria do not take account of Select setting for the "Traffic info " function in an incident on the route. TMC messages. the list of route settings (Without, Manual or Automatic).

I receive a "Danger zone" alert which is not on Other than guidance, the system announces all Zoom in on the map to see the exact position my route. "Danger zones" positioned in a cone located in of the "Danger zone". Select "On the route" to front of the vehicle. It may provide an alert for no longer receive alerts other than navigation "Danger zones" located on nearby or parallel instructions or to reduce the time for the roads. announcement.

Certain traffic jams along the route are not On starting, it is several minutes before the Wait until the traffic information is being indicated in real time. system begins to receive the traffic information. received correctly (display of the traffic information icons on the map).

In certain countries, only major routes This is perfectly normal. The system is (motorways, etc.) are listed for the traffic dependent on the traffic information available. information.

34 CITROËN Connect Nav

The altitude is not displayed. On starting, the initialisation of the GPS may Wait until the system has started up completely take up to 3 minutes to receive more than so that there is GPS coverage by at least 4 satellites correctly. 4 satellites.

Depending on the geographical environment This behaviour is normal. The system is (tunnel, etc.) or the weather, the conditions of dependent on the GPS signal reception reception of the GPS signal may vary. conditions.

My navigation is no longer connected. During start-up and in certain geographical Check that the connected services are areas, the connection may be unavailable. activated (settings, contract).

Radio

QUESTION RESPONSE SOLUTION

The reception quality of the tuned radio station The vehicle is too far from the transmitter of Activate the "RDS" function by means of the gradually deteriorates or the stored stations are the station or no transmitter is present in the short-cut menu to enable the system to check not working (no sound, 87.5 MHz is displayed, geographical area. whether there is a more powerful transmitter in etc.). the geographical area.

The environment (hills, buildings, tunnels, This phenomenon is normal and does not basement car parks, etc.) block reception, indicate a failure of the audio equipment. including in RDS mode.

The aerial is absent or has been damaged (for Have the aerial checked by a dealer. example when going through a car wash or into an underground car park). . 35 CITROËN Connect Nav

I cannot find some radio stations in the list of The station is not received or has changed its Press on the "Update list" button in the "Radio stations received. name in the list. stations" secondary menu. The name of the radio station changes. Some radio stations send other information in place of their name (the title of the song for example). The system interprets these details as the station name.

Media

QUESTION RESPONSE SOLUTION

Playback of my USB memory stick starts only Some files supplied with the memory stick Delete the files supplied with the memory stick after a very long wait (around 2 to 3 minutes). may greatly slow down access to reading and limit the number of sub-folders in the file the memory stick (multiplication by 10 of the structure on the memory stick. catalogue time).

The CD is ejected every time or is not played. The CD is upside down, cannot be read, does Check that the CD is inserted in the player the not contain audio files or contains audio files of right way up. a format not recognised by the audio system. Check the condition of the CD: the CD cannot The CD has been recorded in a format that is be played if it is too badly damaged. not compatible with the player (udf, etc.). Check the content in the case of a recorded The CD is protected by an anti-pirating system CD: follow the advice in the "AUDIO" section. not recognised by the audio system. The audio system CD does not read DVDs. Due to poor quality, certain burned CDs will not be read by the audio system.

36 CITROËN Connect Nav

There is a long waiting period following the Upon insertion of a new key, the system reads This is perfectly normal. insertion of a CD or connection of a USB a certain amount of data (directory, title, artist, memory stick. etc.). This may take from a few seconds to a few minutes.

The CD sound is of poor quality. The CD used in scratched or of poor quality. Insert good quality CDs and store them in suitable conditions.

The audio settings (bass, treble, ambience) are Return bass and treble settings to 0, without unsuitable. selecting an ambience.

Some information characters in the currently The audio system does not display some types Use standard characters to name tracks and playing media are not displayed correctly. of characters. folders.

Playback of streaming files does not start. The connected device does not automatically Start playback from the device. launch playback.

Names of tracks and playing time are not The Bluetooth profile does not allow the displayed on the audio streaming screen. transfer of this information.

. 37 CITROËN Connect Nav Telephone

QUESTION RESPONSE SOLUTION

I cannot connect my Bluetooth telephone. The telephone's Bluetooth function may be Check that your telephone has Bluetooth switched off or the telephone may not be switched on. visible. Check in the telephone settings that it is "visible to all".

The Bluetooth telephone is not compatible with You can check the compatibility of your the system. telephone at the Brand's website (services).

The volume of the telephone connected in The sound depends on both the system and Increase the volume of the audio system, to Bluetooth mode is inaudible. the telephone. maximum if required, and increase the volume of the telephone if necessary.

Ambient noise affects the quality of the Reduce the ambient noise level (close the telephone call. windows, reduce the booster fan speed, slow down, etc.). Some contacts are duplicated in the list. The options for synchronising contacts are Select "Display SIM card contacts" or "Display synchronising the contacts on the SIM card, telephone contacts". the contacts on the telephone, or both. When both synchronisations are selected, some contacts may be duplicated.

The contacts are not listed in alphabetical Some telephones offer display options. Modify the telephone directory display settings. order. Depending on the settings chosen, contacts can be transferred in a specific order.

The system does not receive SMS. The Bluetooth mode does not permit sending SMS text messages to the system.

38 CITROËN Connect Nav Settings

QUESTION RESPONSE SOLUTION

When changing the setting of treble and bass, The selection of an equalizer setting imposes Modify the treble and bass or equalizer settings the equalizer setting is deselected. the settings for treble and bass and vice versa. to obtain the desired musical ambience. When changing the equalizer setting, the treble and bass settings are reset.

When changing the balance setting, The selection of a distribution setting imposes Modify the balance setting or the distribution distribution is deselected. the balance settings and vice versa. setting to obtain the desired sound quality. When changing the distribution setting, the balance setting is deselected.

There is a difference in sound quality between To allow for optimal listening quality, the Check that the audio settings are adapted to the different audio sources. audio settings can be tailored to different the sources listened to. It is recommended that sound sources, which can generate audible the audio settings (Bass:, Treble:, Balance) differences when changing source. be adjusted to the middle position, select the "None" musical ambience and set the loudness correction to the "Active" position in CD mode or to the "Inactive" position in radio mode.

When the engine is off, the system switches off When the engine is switched off, the system's Start then vehicle's engine to increase the after several minutes of use. operating time depends on the state of charge of charge of the battery. the battery. The switch-off is normal: the system automatically goes into energy economy mode and switches off to maintain an adequate charge in the battery.

The date and time cannot be set. Setting of the date and time is only available Settings menu/Options/Time-Date setting. if the synchronisation with the satellites is Select the "Time" tab and deactivate the "GPS deactivated. synchronisation" (UTC). . 39 CITROËN Connect Nav

40 CITROËN Connect Radio

CITROËN Connect Radio The different functions and settings described vary according to the version and configuration of your vehicle.

The system is protected in such a way that it will only operate in your vehicle. The display of the message Energy Economy Mode signals that a change to standby is imminent. Multimedia audio system – Contents ® First steps 2 Applications – Bluetooth Steering mounted controls 3 telephone Menus 4 The link below gives access to OSS (Open Applications 5 Source Software) codes for the system. Radio 6 https://www.groupe-psa.com/fr/oss/ DAB radio (Digital Audio Broadcasting) 8 https://www.groupe-psa.com/en/oss/ Media 9 Telephone 11 Settings 16 Frequently asked questions 18 . 1 CITROËN Connect Radio

Press the back arrow to go back a level or Selecting the sound source (depending on First steps confirm. equipment): With the engine running, a press - FM/DAB/AM radio stations (depending on mutes the sound. equipment). The touch screen is of the "capacitive" - Telephone connected via Bluetooth and With the ignition off, a press turns type. Bluetooth multimedia broadcast (streaming). the system on. To clean the screen, use a soft, non- - USB memory stick. abrasive cloth (e.g. spectacles cloth) with - Media player connected via the auxiliary Increase or decrease the volume using no additional cleaning product. socket (depending on equipment). the wheel or the "plus" or "minus" buttons Do not use sharp objects on the screen. - CD player (depending on equipment). (depending on the equipment). Do not touch the screen with wet hands.

Use the buttons either side of or below the touch screen for access to the menus, then Certain information is displayed permanently in press the virtual buttons in the touch screen. the upper bar of the touch screen: - Reminder of the air conditioning information Depending on the model, use the "Source" or (depending on version), and direct access to "Menu" buttons on the left-hand side of the the corresponding menu. touch screen for access to the menus, then - Reminder of the Radio Media and press the virtual buttons in the touch screen. Telephone menu information. - Reminder of the privacy information. You can display the menu at any time by - Access to the Settings of the touch screen pressing the screen briefly with three fingers. and digital instrument panel. In the "Settings" menu you can create a profile for just one person or a group All of the touch areas of the screen are white. of people with shared interests, with For pages with multiple tabs at the bottom of the possibility of entering multiple the screen, you can switch between pages settings (radio presets, audio settings, either by tapping the tab for the desired page, ambiences, etc.); these settings are or by using a finger, sliding the pages to the left taken into account automatically. or to the right. Press in the grey zone to go back a level or confirm.

2 CITROËN Connect Radio

Radio: In very hot conditions, the volume may Steering mounted controls – Short press: display the list of radio be limited to protect the system. It may go stations. Type 2 into standby (screen and sound off) for at Long press: update the list. least 5 minutes Media: The return to normal takes place when Short press: display the list of the temperature in the passenger folders. compartment has dropped. Voice commands: Long press: display the available This control is located on the sorting options. steering wheel or at the end of the Change audio source (radio; USB; lighting control stalk (depending on AUX if equipment connected; CD; equipment). Steering mounted controls streaming). Short press, smartphone voice commands via the system. Steering mounted controls – Confirm a selection. Type 1 Increase volume.

Increase volume. Mute/Restore the sound (depending on equipment). Radio: Or Select the previous/next preset radio Mute by pressing the volume station. Decrease volume. increase and decrease buttons Select the previous/next item in a simultaneously (depending on menu or a list. equipment). Media: Restore the sound by pressing one Select the previous/next track. Mute/Restore sound by of the two volume buttons. Select the previous/next item in a simultaneously pressing the Decrease volume. menu or a list. increase and decrease volume buttons. Media (short press): change the multimedia source. . 3 CITROËN Connect Radio Telephone (short press): start Telephone telephone call. Menus Depending on equipment/Depending on version. Call in progress (short press): Applications ® access telephone menu. Depending on equipment/Depending on version. Connect a telephone by Bluetooth . Telephone (long press): reject an Operate certain applications on incoming call, end call; when no call Access configurable equipment. a smartphone connected via is in progress, access telephone MirrorLinkTM, CarPlay® or Android menu. Auto.

Radio (rotate): automatic search for the previous/next station. Media (rotate): previous/next track, move through a list. Short press: confirm a selection; if nothing selected, access to presets.

Radio: display the list of stations. Radio Media Media: display the list of tracks. Depending on equipment/Depending on version. Radio (press and hold): update the list of stations received. Select an audio source or radio station.

4 CITROËN Connect Radio Settings Navigation Applications Depending on equipment/Depending on version. Depending on equipment/Depending on version. Configure a personal profile and/ Configure the navigation and select Viewing photos or configure the sound (balance, your destination via MirrorLinkTM, Insert a USB memory stick in the USB port. ambience, etc.) and the display CarPlay® or Android Auto. (language, units, date, time, etc.). To protect the system, do not use a USB hub.

The system can read folders and image files in the formats: .tiff; .gif; .jpg/jpeg; .bmp; .png.

Press Applications to display the primary page.

Press "Photos".

Driving Air conditioning Select a folder. Depending on equipment/Depending on version. Depending on equipment/Depending on version. Manage the different temperature Select an image to view. Activate, deactivate or configure and air flow settings. certain vehicle functions.

Press this button to display the details of the photo.

18,5 21,5 Press the back arrow to go back a level. . 5 CITROËN Connect Radio Managing messages Press this button to edit and modify Press "OK" to confirm. the existing text. Press Applications to display the primary page. Press this button to write a new Radio reception may be affected by the message. use of electrical equipment not approved Press "SMS". by the Brand, such as a USB charger Press the basket to delete the connected to the 12 V socket. message. The exterior environment (hills, buildings, Select the "SMS" tab. tunnels, basement car parks, etc.) may block reception, including in RDS mode. Press this button to select the This is a normal effect of the way in display settings for messages. Radio which radio waves are transmitted and Selecting a station does not indicate any failure of the audio equipment. Press this button to search and Press Radio Media to display the select a recipient. primary page.

Press one of the buttons for an Select the "Quick messages" tab. automatic search for radio stations. Changing waveband Press Radio Media to display the Press this button to select the primary page. display settings for messages. Or Move the cursor for a manual search Press the "OPTIONS" button to go to the for frequencies up or down. secondary page. Press this button to write a new message. Press "Band" to change waveband.

Or Press the basket alongside the selected message to delete it. Press the frequency. Press in the grey zone to confirm.

Press this button alongside the selected message to display the Enter the FM and AM waveband secondary page. values using the virtual keypad.

6 CITROËN Connect Radio

Presetting a station The RDS, if activated, enables you to Play TA messages continue listening to the same station Select a radio station or frequency. by automatically retuning to alternative The TA (Traffic Announcement) function frequencies. However, in certain Make a short press on the star conditions, coverage of this RDS station gives priority to TA alert messages. outline. If the star is solid, the radio may not be assured throughout the entire To operate, this function needs good station is already preset. country as radio stations do not cover reception of a radio station that carries 100% of the territory. This explains the this type of message. While traffic loss of reception of the station during a Or journey. information is being broadcast, the current media is automatically interrupted so that Select a radio station or frequency. the TA message can be heard. Normal Press "Preset". play of the media previously playing is Make a long press on one of the Display text information resumed at the end of the message. buttons to preset the station. The "Radio Text" function allows information transmitted by the radio Press Radio Media to display the Activate/Deactivate the RDS station and related to the station or the primary page. song playing to be displayed. Press the "OPTIONS" button to go to the Press Radio Media to display the secondary page. primary page. Press Radio Media to display the Activate/Deactivate "TA". Press the "OPTIONS" button to go to the primary page. secondary page. Press the "OPTIONS" button to go to the Press in the grey zone to confirm. Activate/Deactivate "RDS". secondary page. Activate/Deactivate "INFO". Press in the grey zone to confirm. Press in the grey zone to confirm. Audio settings Press Radio Media to display the primary page.

Press the "OPTIONS" button to go to the secondary page. . 7 CITROËN Connect Radio

Press "Audio settings". Onboard audio: the Sound Staging of FM-DAB Tracking Arkamys© optimises the distribution of sound in the passenger compartment. DAB does not cover 100% of the territory. Select the "Tone" or "Balance" or When the digital radio signal is poor, "Sound" or "Voice" or "Ringtones" the "FM-DAB Tracking" allows you to tab to configure the audio settings. continue listening to the same station, DAB (Digital Audio by automatically switching to the Press the back arrow to confirm. Broadcasting) radio corresponding FM analogue station (if there is one). Terrestrial Digital Radio

Digital radio provides higher quality In the "Tone" tab, the Ambience audio reception. Press Radio Media to display the settings, as well as Bass, Medium and The various "multiplexes/ensembles" offer primary page. Treble are different and independent for a choice of radio stations arranged in each audio source. alphabetical order. Press the "OPTIONS" button to go to the In the "Balance" tab, the All secondary page. passengers, Driver and Front only Press Radio Media to display the settings are common to all sources. Activate/Deactivate "FM-DAB primary page. In the "Sound" tab, activate or deactivate Tracking". "Volume linked to speed", "Auxiliary Press the "OPTIONS" button to go to the Press in the grey zone to confirm. input" and "Touch tones". secondary page.

Press "Band" to select the "DAB band". The sound balance (or spatialisation with If "FM-DAB Tracking" is activated, there the Arkamys© system) is audio processing is a difference of a few seconds when Press in the grey zone to confirm. that allows the quality of the sound to the system switches to FM analogue be adapted according to the number of radio with sometimes a variation in passengers in the vehicle. volume. Once the digital signal quality is restored, the system automatically changes back to DAB.

8 CITROËN Connect Radio

ignition is switched off or a USB memory stick If the DAB station being listened to is Selecting the source is connected. The lists are memorised: if they not available on FM, or if the "FM-DAB are not modified, the subsequent loading time Press Radio Media to display the Tracking" is not activated, the sound will will be shorter. primary page. cut out while the digital signal is too weak. Press the "SOURCES" button. Choose the source. Auxiliary socket (AUX) Media ® Depending on equipment Bluetooth audio streaming USB port Streaming allows you to listen to music from your smartphone. The Bluetooth profile must be activated, first adjust the volume on your portable device (to a high level). Then adjust the volume of your system. If play does not start automatically, it may be This source is only available if "Auxiliary input" necessary to start the audio playback from the smartphone. Insert the USB memory stick in the USB port or has been checked in the audio settings. Control is from the portable device or by using connect the USB device to the USB port using Connect the portable device (MP3 player, etc.) the system's touch buttons. a suitable cable (not supplied). to the jack socket using an audio cable (not supplied). Once connected in Streaming mode, the To protect the system, do not use a USB First adjust the volume of your portable device smartphone is considered to be a media hub. (to a high level). Then adjust the volume of your source. audio system. The system builds playlists (in temporary Operation of controls is via the portable device. memory), an operation which can take from Connecting Apple® players a few seconds to several minutes at the first connection. Connect the Apple® player to the USB port Reduce the number of non-music files and the using a suitable cable (not supplied). number of folders to reduce the waiting time. Play starts automatically. The playlists are updated every time the Control is via the audio system. . 9 CITROËN Connect Radio

It is advisable to restrict file names to The classifications available are those of Information and advice 20 characters, without using special characters the portable device connected (artists/ (e.g. " " ? . ; ù) so as to avoid any reading or albums/genres/playlists/audiobooks/ The system supports USB Mass Storage display problems. podcasts), you can also use a devices, BlackBerry® devices or Apple® classification structured in the form of a players via USB ports. The adapter cable Use only USB memory sticks in FAT32 format library. is not supplied. (File Allocation Table). The default classification used is by Device management is done by the audio system controls. artist. To modify the classification used, It is recommended that the original USB Other peripherals, not recognised on return to the first level of the menu then cable for the portable device be used. select the desired classification (playlists connection, must be connected to the for example) and confirm to go down auxiliary socket using a Jack cable (not through the menu to the desired track. supplied) or via Bluetooth streaming, In order to be able to play a burned CDR or depending on compatibility. CDRW, select standards ISO 9660 level 1, 2 or Joliet if possible when burning the CD. If the disc is burned in another format, it may not be played correctly. The version of software in the audio system It is recommended that the same burning may not be compatible with the generation of standard be always used on an individual disc, ® your Apple player. To protect the system, do not use a USB with the lowest speed possible (4x maximum) hub. for the best acoustic quality. In the particular case of a multi-session CD, the The audio equipment will only play audio files Joliet standard is recommended. with ".wav", ".wma", ".aac", ".ogg" and ".mp3" file extensions and with a bit rate of between 32 Kbps and 320 Kbps. It also supports VBR (Variable Bit Rate) mode. No other file types (".mp4", etc.) can be read. Files of the ".wma" type should be to the wma 9 standard. Sampling frequencies supported are 11, 22, 44 and 48 kHz.

10 CITROËN Connect Radio

When connecting a smartphone As a safety measure, applications can Telephone to the system, it is recommended only be viewed with the vehicle stationary; TM that Bluetooth® be started on the MirrorLink smartphone display is interrupted once the vehicle is smartphone connection moving.

As a safety measure and because it Telephone connected by requires sustained attention by the driver, The "MirrorLinkTM" function requires a Bluetooth® using a smartphone when driving is compatible smartphone and applications. prohibited. From the system, press All operations must be done with the "Telephone" to display the primary page. vehicle stationary. Telephone not connected by Press the "PHONE" button to display the ® Bluetooth secondary page. The synchronisation of a personal smartphone allows users to display Connect a USB cable. The Press "MirrorLinkTM" to start the applications adapted for the smartphone's smartphone charges when application in the system. MirrorLinkTM technology on the vehicle connected by a USB cable. screen. From the system, press Once the connection is established, a page The processes and standards "Telephone" to display the primary is displayed with the applications already are constantly changing. For the page. downloaded to your smartphone and adapted communication process between the to MirrorLinkTM technology. smartphone and the system to operate, Press "MirrorLinkTM" to start the it is essential that the smartphone be application in the system. Access to the different audio sources remains unlocked; update the operating system accessible in the margin of the MirrorLinkTM of the smartphone as well as the date Depending on the smartphone, it may be display, using touch buttons in the upper bar. and time of the smartphone and the necessary to activate the "MirrorLinkTM" Access to the menus for the system is possible system. function. at any time using the dedicated buttons. For the list of eligible smartphones, go During the procedure, several to the Brand's internet website in your screen pages relating to certain country. functions are displayed. There may be a wait for the availability of Accept to start and complete the applications, depending on the quality of connection. your network. . 11 CITROËN Connect Radio CarPlay® smartphone Or Android Auto smartphone connection If the smartphone is already connection connected by Bluetooth®. As a safety measure and because it As a safety measure and because it requires sustained attention by the driver, Connect a USB cable. The requires sustained attention by the driver, using a smartphone when driving is smartphone charges when using a smartphone when driving is prohibited. connected by a USB cable. prohibited. All operations must be done with the All operations must be done with the vehicle stationary. From the system, press vehicle stationary. "Telephone" to display the primary page. On your smartphone, download the The synchronisation of a personal Android Auto application. smartphone allows users to display Press the "PHONE" button to go to the applications compatible with the secondary page. smartphone's CarPlay® technology on the Press " " to display the vehicle screen when the smartphone's CarPlay The synchronisation of a personal CarPlay® interface. CarPlay® function has been previously smartphone allows users to display activated. applications adapted for the smartphone's As the principles and standards are Android Auto technology on the vehicle screen. constantly changing, it is recommended On connecting the USB cable, the The processes and standards that you keep your smartphone's CarPlay® function deactivates the are constantly changing. For the operating system updated. system's Bluetooth ® mode. For the list of eligible smartphones, go communication process between the to the brand's internet website in your smartphone and the system to operate, You can go to the CarPlay® country. it is essential that the smartphone be navigation at any time by pressing unlocked; update the operating system the system's Navigation button. of the smartphone as well as the date Connect a USB cable. The and time of the smartphone and the smartphone charges when system. connected by a USB cable. For the list of eligible smartphones, go to the Brand's internet website in your From the system, press Telephone country. to display the CarPlay® interface.

12 CITROËN Connect Radio

When connecting a smartphone ® As a safety measure, applications can Pairing a Bluetooth to the system, it is recommended only be viewed with the vehicle stationary; that Bluetooth® be started on the telephone display is interrupted once the vehicle is smartphone moving. As a safety measure and because it requires sustained attention by the driver, the pairing of a Bluetooth mobile The "Android Auto" function requires the Telephone connected by Bluetooth® telephone with the Bluetooth hands-free use of a compatible smartphone and system of your audio system must be applications. From the system, press done with the vehicle stationary and the "Telephone" to display the primary ignition on. page. Telephone not connected by Bluetooth® Press the "PHONE" button to display the secondary page. Activate the Bluetooth function on the Connect a USB cable. The telephone and ensure that it is "visible to smartphone charges when Press "Android Auto" to start the all" (telephone configuration). connected by a USB cable. application in the system.

From the system, press Procedure from the telephone "Telephone" to display the primary Different audio sources remain accessible in page. the margin of the Android Auto display, using Select the name of the system in the touch buttons in the upper bar. list of devices detected. Press "Android Auto" to start the Access to the menus for the system is possible application in the system. at any time using the dedicated buttons. In the system, accept the connection request Depending on the smartphone, it may be from the telephone. necessary to activate the "Android Auto" function. There may be a wait for the availability of To complete the pairing, whichever During the procedure, several applications, depending on the quality of procedure used (from the telephone or screen pages relating to certain your network. from the system), ensure that the code functions are displayed. is the same in the system and in the Accept to start and complete the telephone. connection. . 13 CITROËN Connect Radio

To modify the connection profile: Procedure from the system The available services depend on the Press Telephone to display the Press Telephone to display the network, SIM card, and the devices' primary page. primary page. Bluetooth compatibility. Consult your telephone's manual and your operator to Press the "PHONE" button to go to the Press "Bluetooth search". find out which services are available to secondary page. The list of telephones detected is you. displayed. Press "Bluetooth connection" to display the list of paired devices. The profiles compatible with the system Select the name of the chosen are: HFP, OPP, PBAP, A2DP, AVRCP, telephone in the list. Press the "details" button of a paired MAP and PAN. device. Go to the Brand's website for more information If the pairing procedure fails, it is (compatibility, additional help, etc.). recommended that you deactivate and The system offers to connect the telephone then reactivate the Bluetooth function in your telephone. with 3 profiles: - "Telephone" (hands-free kit, telephone only), Managing paired telephones Depending on the type of telephone, you - "Streaming" (streaming: wireless playing of may be asked to accept or not the transfer the audio files on the telephone), This function allows the connection or of your contacts and messages. - "Internet data". disconnection of a peripheral device as Select one or more profiles. well as the deletion of a pairing. Automatic reconnection Press "OK" to confirm. Press Telephone to display the On return to the vehicle, if the last primary page. telephone connected is present again, Press the "PHONE" button to go to the it is automatically recognised and within The ability of the system to connect to just secondary page. about 30 seconds of switching on the one profile depends on the telephone. ignition, the pairing is established All three profiles may connect by default. Press "Bluetooth connection" to without any action on your part display the list of paired devices. (Bluetooth activated).

14 CITROËN Connect Radio

Press on the name of the telephone Or Press "Contacts". chosen in the list to disconnect it. Press "End call". Select the desired contact from the list offered. Press again to connect it. Press "Call". Making a call

Deleting a telephone Using the telephone is not recommended Calling a recently used Press the basket at the top right while driving. number Park the vehicle. of the screen to display a basket Press Telephone to display the Make the call using the steering mounted alongside the telephone chosen. primary page. controls. Or Press the basket alongside the Make a long press telephone chosen to delete it. Calling a new number Press Telephone to display the primary page. on the steering mounted button. Receiving a call Enter the phone number using the An incoming call is announced by a ring and a digital keypad. Press " ". superimposed display in the screen. Recent calls Press "Call" to start the call. Select the desired contact from the list offered. Make a short press on the steering mounted PHONE button to accept an incoming call. It is always possible to make a call directly Calling a contact from the telephone; as a safety measure, And first park the vehicle. Make a long press Press Telephone to display the primary page.

Or make a long press on the steering mounted PHONE Setting the ringtone button to reject the call. Press Telephone to display the on the steering mounted PHONE primary page. button. . 15 CITROËN Connect Radio

Press the "OPTIONS" button to go to the Press the back arrow to confirm. Press "Configuration" to go to the secondary page. secondary page. Press "Ring volume" to display the volume bar. Press this button to activate the Press "System configuration". profile. Press the arrows or move the cursor Press the back arrow again to to set the ring volume. confirm. Select the "Units" tab to change the units of distance, fuel consumption and temperature.

Press this button to initialise the Press the "Factory settings" tab to return to the initial settings. Settings profile selected. Brightness adjustment Profile settings Returning the system to factory settings Press Settings to display the activates the English language by default As a safety measure and because it primary page. (depending on version). requires the sustained attention of the driver, changes to settings must only be Press Brightness. Select the "System info" tab to display the done with the vehicle stationary. versions of the different modules installed in the system. Press Settings to display the Move the cursor to adjust the primary page. brightness of the screen and/or of Press the "Privacy" tab, the instrument panel (depending on or the version). Press "Profiles". Press Settings to display the Press in the grey zone to confirm. primary page.

Select "Profile 1" or "Profile 2" or "Profile 3" Press "Privacy" to activate or or "Common profile". deactivate the privacy data mode. Press this button to enter a name for Modifying system settings the profile using the virtual keypad.

Press Settings to display the Press " " to save. OK primary page. 16 CITROËN Connect Radio

Activate or deactivate: Press the back arrow to confirm. Press this button to adjust the time - "No sharing (data, vehicle using the virtual keypad. position)". - "Data sharing only" Press "OK" to save the time. - "Sharing data and the vehicle position" Select the language Press this button to define the time Press Settings to display the zone. Press the back arrow to confirm. primary page.

Press "Configuration" to go to the Select the display format for the time secondary page. (12h/24h). Press Settings to display the primary page. Activate or deactivate summer time Select "Language" to change the (+1 hour). language. Press " " to go to the Configuration Activate or deactivate secondary page. synchronisation with GPS (UTC). Press the back arrow to confirm. Press "Screen configuration". Press the back arrow to save the settings. Press "Brightness". Setting the time

Move the cursor to adjust the Press Settings to display the The system does not automatically manage brightness of the screen and/or of primary page. the change between winter and summer the instrument panel (depending on the version). time (depending on the country of sale). Press "Configuration" to go to the Press the back arrow to confirm. secondary page.

Press "Date and time". Setting the date Press "Animation". Press Settings to display the Activate or deactivate: "Automatic primary page. scrolling". Select "Time". Select "Animated transitions". . 17 CITROËN Connect Radio

Press "Configuration" to go to the secondary page. Frequently asked questions Press "Date and time". The following information groups together the answers to the most frequently asked questions concerning your system.

Select "Date". Press this button to define the date.

Press the back arrow to save the date.

Select the display format of the date.

Press the back arrow again to confirm.

Adjustment of the time and date is only available if "GPS Synchronisation" is deactivated.

18 CITROËN Connect Radio

Radio

QUESTION RESPONSE SOLUTION

The reception quality of the tuned radio station The vehicle is too far from the transmitter of Activate the "RDS" function by means of the gradually deteriorates or the stored stations are the station or no transmitter is present in the upper band to enable the system to check not working (no sound, 87.5 MHz is displayed, geographical area. whether there is a more powerful transmitter in etc.). the geographical area.

The environment (hills, buildings, tunnels, This phenomenon is normal and does not basement car parks, etc.) block reception, indicate a failure of the audio equipment. including in RDS mode.

The aerial is absent or has been damaged (for Have the aerial checked by a dealer. example when going through a car wash or into an underground car park).

I cannot find some radio stations in the list of The station is not received or has changed its Press the round arrow on the "List" tab of the received stations. name in the list. "Radio" page. The name of the radio station changes. Some radio stations send other information in place of their name (the title of the song for example). The system interprets these details as the station name.

. 19 CITROËN Connect Radio Media

QUESTION RESPONSE SOLUTION

Some information characters in the currently The audio system does not display some types Use standard characters to name tracks and playing media are not displayed correctly. of characters. folders.

Playback of streaming files does not start. The connected device does not automatically Start playback from the device. launch playback.

Names of tracks and playing time are not The Bluetooth profile does not allow the displayed on the audio streaming screen. transfer of this information.

20 CITROËN Connect Radio Telephone

QUESTION RESPONSE SOLUTION

I am unable to connect my Bluetooth The telephone's Bluetooth function may be Check that your telephone has Bluetooth telephone. switched off or the telephone may not be switched on. visible. Check in the telephone settings that it is "visible to all".

The Bluetooth telephone is not compatible with You can check the compatibility of your the system. telephone at the Brand's website (services).

Android Auto and CarPlay do not work. Android Auto and CarPlay may not activate if Use authentic USB cables to ensure the USB cables are of poor quality. compatibility.

Ambient noise affects the quality of the Reduce the ambient noise level (close the windows, telephone call. reduce the booster fan speed, slow down, etc.).

The contacts are not listed in alphabetical Some phones provide display options. Modify the telephone directory display settings. order. Depending on the chosen settings, contacts can be transferred in a specific order.

. 21 CITROËN Connect Radio Settings

QUESTION RESPONSE SOLUTION

There is a difference in sound quality between To allow for optimal listening quality, the Check that the audio settings are adapted the different audio sources. audio settings can be tailored to different to the sources listened to. Adjust the audio sound sources, which can generate audible functions to the middle position. differences when changing source.

When the engine is off, the system switches off When the engine is switched off, the system's Turn the ignition on to increase the charge of after several minutes of use. operating time depends on the state of charge the battery. of the battery. The switch-off is normal: the system automatically goes into energy economy mode and switches off to maintain an adequate charge in the battery.

22 Alphabetical index A B Accessories...... 69, 99 Battery...... 140, 147, 171, 173 Checking tyre pressures Active Safety Brake...... 15, 117-119 Battery, charging...... 172-173 (using the kit)...... 153-154, 156 AdBlue®...... 14, 21-22, 149-150 Battery, remote control...... 35-38 Checks...... 144, 147-148 Additive, Diesel...... 12 Blanking screen (snow shield)...... 139 Checks, routine...... 147-148 Adjusting headlamps...... 64 Blind spot monitoring system...... 123-124 Child lock...... 93 Adjusting head restraints...... 44 Blind spot sensors...... 123-124 Children...... 87-91 Adjusting seats...... 43 BlueHDi...... 21-22, 149 Children (safety)...... 93 Adjusting the air distribution...... 50-53 Bluetooth (hands-free)...... 27-28, 13-14 Child seats ...... 77, 81-82, 86-87, 92 Adjusting the air flow...... 50-53 Bluetooth (telephone)...... 27-28, 13-15 Child seats, conventional...... 86 Adjusting the date...... 29, 32, 17 Bonnet...... 143 Child seats, i-Size...... 91 Adjusting the height of the steering wheel...... 46 Boot...... 39-40, 55, 59 Child seats, ISOFIX...... 88-91 Adjusting the lumbar support...... 44 Brake discs...... 148 Checking tyre pressures Adjusting the temperature...... 50-53 Brake lamps...... 164 (using the kit)...... 153-154, 156 Adjusting the time...... 29, 33, 17 Brakes...... 9, 148 Checks...... 144, 147-148 Advice on care and maintenance...... 55, 152 Braking, automatic emergency...... 15, 117-119 Checks, routine...... 147-148 Advice on driving...... 94-95 Brightness...... 16 Child lock...... 93 Airbags...... 16, 78, 82 Bulbs (changing)...... 161-162, 164 Children...... 87-91 Airbags, curtain...... 79-80 Children (safety)...... 93 Airbags, front...... 78-80, 83 Child seats ...... 77, 81-82, 86-87, 92 Airbags, lateral...... 79-80 Child seats, conventional...... 86 Air conditioning...... 6, 50 C Child seats, i-Size...... 91 Air conditioning, automatic...... 49-53 Cable, audio...... 25 Child seats, ISOFIX...... 88-91 Air conditioning, manual...... 49, 51 Cable, Jack...... 25 CITROËN Connect Nav...... 1 Air intake...... 50-53 Capacity, fuel tank...... 137-138 CITROËN Connect Radio...... 1 Air vents...... 48 Cap, fuel filler...... 137-138 Cleaning (advice)...... 152 Alarm...... 40-41 CD...... 25, 9 Closing the boot...... 39-40 Anti-lock braking system (ABS)...... 72 CD, MP3...... 25, 9 Closing the doors...... 34, 39 Anti-slip regulation (ASR)...... 72 Central locking...... 32, 34 Coat hanger...... 58 Apple CarPlay connection...... 18, 12 Changing a bulb...... 161-162, 164-165 Collision risk alert...... 119 Armrest, front...... 56, 58 Changing a fuse...... 166-167, 169-170 Configuration, vehicle...... 24-27 Assistance call...... 70-71 Changing a wheel...... 154, 157-158 Connection, Bluetooth...... 21-22, 27-28, 13-15 Assistance, emergency braking...... 72, 118 Changing a wiper blade...... 67, 141-142 Connection, MirrorLink...... 19, 11-12 Audio streaming (Bluetooth)...... 25-26, 9 Changing the remote control battery...... 37 Connection, Wi-Fi network...... 22 Checking the engine oil level...... 21 Control, electric windows...... 41 Checking the levels...... 144, 146 . 181 Alphabetical index E Control, emergency boot release...... 40 Earth point, remote...... 144 Fuel...... 6, 136 Control, emergency door...... 36-37 Eco-driving (advice)...... 6 Fuel consumption...... 6 Control, heated seats...... 44-45 Economy mode...... 140 Fuel tank...... 138 Control stalk, lighting...... 61, 64 Electronic brake force distribution (EBFD)...... 72 Fusebox, engine compartment...... 170 Control stalk, wipers...... 65-66, 68 Emergency braking assistance (EBA)...... 72 Fuses...... 166-167, 169-170 Courtesy lamp...... 165 Emergency call...... 70-71 Courtesy lamps...... 54-55 Emergency switching off...... 99 Cover, load space...... 60 Emissions control system, SCR...... 149 Cruise control...... 112, 114-116 Energy economy mode...... 140 Cruise control by speed limit recognition...... 112 Engine compartment...... 144 G Cup holder...... 56 Engine, Diesel...... 16, 136, 153, 178 Gauge, fuel...... 137-138 Engine, petrol...... 136, 144, 177 Gearbox, automatic.....6, 101-103, 107-109, 148 Engines...... 176-178 Gearbox, electronic...... 6, 103-106, 148 Environment...... 6, 38 Gearbox, D manual...... 6, 56, 58, 100, 107-109, 148 DAB (Digital Audio Gear lever...... 6 Broadcasting) – Digital radio...... 24, 8 Gear lever, electronic gearbox...... 148 Date (setting)...... 29, 32, 17 Gear lever, manual gearbox...... 100 Daytime running lamps...... 61, 63 Gear shift indicator ~ Gear Daytime running lamps, LED...... 162 F efficiency indicator...... 106 Deactivating the passenger airbag.78-79, 82-83 Glove box...... 56 Fatigue detection...... 120-121 GPS...... 14 Deactivation of DSC (ESC)...... 73 ® Filling the AdBlue tank...... 150 Grip control...... 74-75 Deadlocking...... 33, 35 Filling the fuel tank...... 136-138 Defrosting...... 54 Filter, air...... 147 Defrosting, front...... 54 Filter, Diesel fuel...... 144 Demisting...... 54 Filter, oil...... 147 H Demisting, front...... 54 Filter, particle...... 146-147 Hazard warning lamps...... 70, 153 Dimensions...... 179 Filter, passenger compartment...... 147 Hazard warning lamps, Dipstick...... 21, 144-145 Fitting a wheel...... 159-161 automatic operation...... 70 Direction indicators...... 62, 64, 162-164 Fitting roof bars...... 142 Headlamps, automatic illumination...... 61, 63 Display screen, instrument panel...... 106 Fittings, boot...... 59-60 Headlamps, dipped beam...... 61, 162 Distance alert ~ Collision Risk Alert...... 117 Fittings, interior...... 56 Headlamps, main beam...... 18, 61, 162 Doors...... 39 Flap, fuel filler...... 137-138 Head restraints, front...... 44 Driver's attention warning...... 121 Foglamp, rear...... 17, 62, 164 Head restraints, rear...... 46 Driving economically...... 6 Foglamps, front...... 61-62, 65, 162-163 Heating...... 6, 50-51 Driving time warning...... 120 Foglamps, rear...... 61 Hill start assist...... 107 Dynamic stability control (DSC)...... 15, 72-75 Frequency (radio)...... 23-24 Hooks...... 59 Horn...... 70

182 Alphabetical index I L M Identification, vehicle...... 179 Labels, identification...... 179 Maintenance (advice)...... 152 Ignition...... 53, 97, 99, 29 Lamp, boot...... 55, 166 Maintenance, routine...... 6 Ignition on...... 99 Lamps, parking...... 64 Map reading lamps...... 54-55 Immobiliser, electronic...... 35-36, 95 Lane Departure Warning System (LDWS)....122 Markings, identification...... 179 ® Indicator, AdBlue range...... 21-22 Leather (care)...... 152 Mat...... 56, 58 Indicator, engine oil level...... 21 LEDs – Light-emitting diodes...... 63, 162 Menu...... 12 Indicators, direction...... 62, 163 Level, brake fluid...... 146 Menus (audio)...... 4-5, 4-5 Inflating tyres (using the kit)...... 153-154, 156 Level, Diesel additive...... 146 Messages...... 30 Instrument panel...... 8 Level, engine coolant...... 146 Messages, quick...... 30 Internet browser...... 21 Level, engine oil...... 21, 144-145 Mirror, rear view...... 47 ISOFIX mountings...... 88 Levels and checks...... 144, 146 Mirrors, door...... 46-47, 123-124 Level, screenwash fluid...... 67, 146 Misfuel prevention...... 138 Light-emitting diodes – LEDs...... 63, 162, 165 Mountings, ISOFIX...... 88 Lighting, cornering...... 65 Lighting dimmer...... 30 Lighting, directional...... 65 J Lighting, guide-me home...... 64 Lighting, interior...... 54-55 N Jack...... 157-158, 25 Loading...... 6 Jump starting...... 171 Load reduction mode...... 140 Number plate lamps...... 165 Locating your vehicle...... 32 Locking...... 35-36 K Locking from the inside...... 35 Locking the doors...... 35 O Key...... 31, 33-37 Low fuel level...... 137-138 Key, electronic...... 33-34 Lumbar...... 44 Obstacle detection...... 125 Keyless Entry and Starting...... 33-36, 95, 97-98 Oil change...... 144-145 Key not recognised...... 99 Oil consumption...... 144-145 Key with remote control...... 32, 95 Oil, engine...... 144-145 Kit, hands-free...... 27-28, 13-14 On-board tools...... 154 Kit, temporary puncture Opening the bonnet...... 143 repair...... 59, 153-154, 156 Opening the boot...... 33, 39-40 Opening the doors...... 33, 39 . 183 Alphabetical index P Pads, brake...... 148 Recirculation, air...... 50-53 Seat, rear bench...... 45-46 Paint colour code...... 179 Reduction of electrical load...... 140 Seats, front...... 43 Panoramic glass sunroof...... 55 Regeneration of the particle filter...... 147 Seats, heated...... 44-45 Parcel shelf, rear...... 59-60 Reinitialisation of the under- Seats, rear...... 45-46 Park Assist...... 127 inflation detection system...... 133 Selector, gear...... 101-103 Parking brake...... 100, 148 Reinitialising the remote control...... 38 Serial number, vehicle...... 179 Parking sensors, audible and visual...... 125 Reminder, key in ignition...... 97 Service indicator...... 20 Parking sensors, front...... 126 Reminder, lighting on...... 62 Servicing...... 6, 20 Parking sensors, rear...... 125 Remote control...... 31-36 Settings, equipment...... 24-27 Plates, identification...... 179 Removing a wheel...... 159-161 Settings, system...... 32, 16 Player, Apple®...... 26, 9 Removing the mat...... 58 Sidelamps...... 61, 63-64, 162, 164-165 Player, MP3 CD...... 25 Replacing bulbs...... 161-162, 164 Side repeater...... 163 Player, USB...... 25, 9 Replacing fuses...... 166-167, 169 Snow chains...... 138-139 Port, USB...... 56-57, 25, 9 Replacing the air filter...... 147 Socket, 12 V accessory...... 56-57 Pre-heater, Diesel...... 16 Replacing the oil filter...... 147 Socket, auxiliary...... 25, 9 Pressures, tyres...... 154, 157, 179-180 Replacing the passenger Socket, Jack...... 57, 25 Pre-tensioning seat belts...... 77 compartment filter...... 147 Sockets, audio...... 57 Priming pump...... 153 Reservoir, screenwash...... 146 Speed limiter...... 112-114 Priming the fuel system...... 153 Resetting the service indicator...... 20-21 Speed limit recognition...... 110-111 Profiles...... 31, 16 Resetting the trip recorder...... 28-29 Stability control (ESC)...... 72 Protecting children...... 78-79, 81-83, 87-91 Reversing camera...... 127 Starting a Diesel engine...... 136 Puncture...... 153-154, 156-157 Reversing lamp...... 164 Starting the engine...... 96 Roof bars...... 142 Starting the vehicle...... 94, 96-98, 101-106 Running out of fuel (Diesel)...... 153 Starting using another battery...... 99, 171 Station, radio...... 23-24, 6-7 R Stay, bonnet...... 143 Steering mounted controls, audio...... 3, 3 Radio...... 23, 25, 6-7, 9 S Steering wheel, adjustment...... 46 Radio, digital (Digital Audio Safety, children...... 78-79 81-83 87-91 Stopping the vehicle...... 94, 96-98, 101-106 Broadcasting – DAB)...... 24 8 , , , Screen, cold climate...... 139 Stop & Start ...... Range, AdBlue...... 21-23 Screen menu map...... 12 18, 28, 49, 54, 107-109, 138, 143, 147, 174 RDS...... 23-24 7 , Screenwash, front...... 67 Storage...... 56, 58 Rear screen, demisting...... 54 Screenwash, rear...... 66 Sun visor...... 56 Recharging the battery...... 172-173 SCR (Selective Catalytic Reduction)...... 149 Switching off the engine...... 96 Seat belts...... 10, 76-77, 86 Synchronising the remote control...... 38

184 Alphabetical index T V Tables of engines...... 177-178 Ventilation...... 6, 48-49, 51 Tables of fuses...... 166-167, 169-170 Visibility...... 54 Tank, fuel...... 137-138 Voice commands...... 5-8, 10-12 Technical data...... 177-178 Telephone...... 27-30, 13-15 Temperature, coolant...... 9 Third brake lamp...... 165 W Three flashes (direction indicators)...... 63 Warning and indicator lamps...... 8 Time (setting)...... 29, 33, 17 TMC (Traffic info)...... 15 Warning lamp, airbag...... 16 Warning lamp, braking system...... 9 Tools...... 157, 157-158 Total distance recorder...... 28-29 Warning lamp, Diesel engine pre-heater...... 16 Warning lamp, driver's seat Touch screen...... 24-27, 1, 1 belt not fastened...... 76 Towbar...... 95, 140 Towed loads...... 176 Warning lamp, low fuel level...... 17 Towing another vehicle...... 174-175 Warning lamp, parking brake...... 9 Towing eye...... 59 Warning lamps...... 8 Warning lamp, seat belts...... 76 Traction control (ASR)...... 15, 72-74 Traffic information (TMC)...... 15 Warning lamp, Service...... 11 Warnings and indicators...... 9 Trailer...... 95, 140 Washing (advice)...... 152 Triangle, warning...... 59, 153 Trip computer...... 27-28 Weights...... 176 Trip distance recorder...... 28-29 Wheel, spare...... 154, 157-158, 180 Window controls...... 41 Tyres...... 6, 180 Tyre under-inflation Windows, rear doors...... 42, 152 Windows, rear quarter...... 152 detection...... 16, 132-133, 157 Wiper blades (changing)...... 67, 141-142 Wiper, rear...... 66 Wipers...... 19, 65, 68 U Wipers, automatic rain sensitive...... 66, 68 Under floor storage...... 59 Under-inflation (detection)...... 132 Unlocking...... 32-33 Unlocking from the inside...... 35 Unlocking the boot...... 32 Unlocking the doors...... 32, 35 Updating the date...... 29, 32, 17 Updating the time...... 29, 33, 17 USB...... 25, 9 . 185

CONDUENT 4Dconcept Automobiles CITROËN declares, by application XEROX of the provisions of the European legislation (Directive 2000/53) relating to End of Life Vehicles, that it achieves the objectives set by this legislation and that recycled materials are used in the manufacture of the products that it sells.

Reproduction or translation of all or part of this document is prohibited without written authorisation from Automobiles CITROËN.

Printed in the EU Anglais

09-17 *17C4C.0041* ANG. 17C4C.0041