User's Guide for Nokia 5200

User’s Guide for Nokia 5200 DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this RM-174 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found from http://www.nokia.com/phones/declaration_of_conformity/. 0434

Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited.

Nokia, Visual Radio, Nokia Connecting People, Xpress-on, XpressPrint, and Pop-Port are trademarks or registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners.

Nokia tune is a sound mark of Nokia Corporation.

Includes RSA BSAFE cryptographic or security protocol software from RSA Security.

Java is a trademark of Sun Microsystems, Inc.

This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection with information which has been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use in connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any other use. Additional information including that relating to promotional, internal and commercial uses may be obtained from MPEG LA, LLC. See .

Copyright © 2007 Nokia. All rights reserved. i Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice.

This device complies with Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment.

Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused.

The contents of this document are provided "as is". Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice.

The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you.

This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited.

Issue 2.1

INTERACTIVE DEMONSTRATIONS The Nokia Care web support provides you with more information on our online services.

INTERACTIVE DEMONSTRATIONS SOFTWARE Learn how to set up your phone for the first time, and find out more about its features. Interactive Demonstrations give step-by-step instructions on using your phone.

USER’S GUIDE The online User’s Guide contains detailed information on your phone. Remember to check regularly for updates.

SOFTWARE Make the most of your phone with software for your phone and PC. Nokia PC Suite connects your phone and PC so you can manage your calendar, contacts, music and images, while other applications complement its use.

USER’S GUIDE SETTINGS Certain phone functions, such as multimedia messaging, mobile browsing and email*, may require settings before you can use them. Have them sent to your phone free of charge. SETTINGS *Not available on all phones.

Copyright © 2007 Nokia. All rights reserved. iii HOW DO I USE MY PHONE? The Set Up section, at www.nokia-asia.com/setup, helps you prepare your phone for use. Familiarise yourself with phone functions and features by referring to the Guides and Demos section at www.nokia-asia.com/guides.

HOW DO I SYNCHRONISE MY PHONE AND PC? Connecting your phone to a compatible PC with the requisite Nokia PC Suite version from www.nokia-asia.com/pcsuite lets you synchronise your calendar and contacts.

WHERE CAN I GET SOFTWARE FOR MY PHONE? Get more out of your phone with downloads from the Software section at www.nokia-asia.com/software.

WHERE CAN I FIND ANSWERS TO COMMON QUESTIONS? Look up the FAQ section at www.nokia-asia.com/faq for answers to your questions on your phone and other Nokia products and services.

HOW DO I KEEP UP WITH NOKIA NEWS? Subscribe online to Nokia Connections at www.nokia-asia.com/signup, and be the first to know about the latest products, promotions and upcoming events.

Should you still require further assistance, please refer to www.nokia-asia.com/contactus. For additional information on repair services, please visit www.nokia-asia.com/repair.

Please visit www.nokia-asia.com/support for details.

For your safety...... ix Indicators ...... 7 About your device...... x Flight mode ...... 8 Network services...... x Keypad lock (keyguard)...... 9 Shared memory ...... xi Functions without a SIM card ...... 9 Enhancements ...... xi 3. Call functions ...... 10 General information ...... xii Make a call...... 10 Access codes ...... xii Speed dialing...... 10 Security code...... xii Enhanced voice dialing ...... 10 PIN codes...... xii Answer or reject a call...... 11 PUK codes ...... xii Call waiting ...... 11 Barring password ...... xii Options during a call...... 11 Configuration settings service.... xii Download content...... xiii 4. Write text ...... 12 Nokia support and contact Traditional text input ...... 12 information...... xiii Predictive text input...... 12 1. Get started ...... 1 5. Navigate the menus...... 13 Install SIM card and battery...... 1 6. Messaging...... 14 Insert a microSD card...... 2 Text message ...... 14 Remove the microSD card ...... 2 Write and send a message ...... 14 Charge the battery ...... 3 Read and reply to a message...... 15 Open the slide phone...... 3 Multimedia message ...... 15 Switch the phone on and off ...... 3 Write and send a multimedia Set the time and date...... 3 message ...... 15 Plug and play service...... 4 Write and send a multimedia plus Antenna...... 4 message ...... 15 Headset...... 4 Message sending...... 16 Audio adaptor ...... 4 Read and reply to a message...... 16 Phone strap ...... 5 Postcards...... 17 Flash messages...... 17 2. Your phone...... 6 Write a message...... 17 Keys and parts ...... 6 Receive a message...... 18 Standby mode...... 7 Nokia Xpress audio messaging ... 18 Display...... 7 Create a message...... 18 Active standby ...... 7 Listen to a message...... 18

Copyright © 2007 Nokia. All rights reserved. v Memory full...... 18 Settings ...... 30 Folders...... 18 Groups ...... 30 E-mail application...... 19 Speed dials ...... 30 Setting wizard...... 19 Info, service, and my numbers.... 30 Write and send an e-mail...... 19 Download e-mail ...... 20 8. Call log...... 31 Read and reply to e-mail...... 20 Positioning information...... 31 E-mail folders...... 21 9. Settings...... 32 Spam filter ...... 21 Instant messaging ...... 21 Profiles...... 32 Access...... 21 Themes...... 32 Connect...... 22 Tones...... 32 Sessions ...... 22 Display ...... 32 Add IM contacts...... 23 Time and date...... 33 Block or unblock messages ...... 24 My shortcuts...... 33 Groups...... 24 Left selection key...... 34 Voice messages...... 24 Right selection key ...... 34 Info messages ...... 24 Navigation key...... 34 Service commands...... 25 Voice commands ...... 34 Delete messages...... 25 Connectivity...... 34 SIM messages ...... 25 Bluetooth wireless technology...... 35 Message settings ...... 25 Infrared ...... 36 Packet data...... 36 General settings ...... 25 Data transfer ...... 37 Text messages...... 25 Multimedia messages...... 26 USB data cable ...... 38 E-mail messages ...... 27 Call...... 39 Phone...... 39 7. Contacts ...... 28 Enhancements...... 40 Search for a contact ...... 28 Configuration ...... 41 Save names and phone Security ...... 42 numbers...... 28 Phone software updates...... 43 Save details ...... 28 Settings...... 43 Copy or move contacts ...... 28 Request a software update...... 43 Edit contact details...... 29 Install a software update...... 43 Synchronize all...... 29 Restore factory settings ...... 43 Delete contacts ...... 29 10. Operator menu...... 44 Business cards ...... 29

vi Copyright © 2007 Nokia. All rights reserved. 11. Gallery...... 45 Callback requests...... 56 Print images ...... 45 Send a callback request ...... 56 Memory card...... 45 Respond to a callback request ...... 57 Format the memory card...... 46 Add a one-to-one contact...... 57 Lock the memory card...... 46 PTT settings ...... 57 Check memory consumption ...... 46 Configuration settings...... 58 Web ...... 58 12. Media ...... 47 Camera and video...... 47 14. Organizer...... 59 Take an image...... 47 Alarm clock ...... 59 Record a video clip...... 47 Stop the alarm...... 59 Camera and video options...... 48 Calendar...... 59 Media player ...... 48 Make a calendar note...... 60 Configuration for a streaming Note alarm...... 60 service ...... 48 To-do list...... 60 Music player...... 48 Notes...... 60 Playing the music tracks...... 49 Calculator ...... 60 Music player options...... 49 Countdown timer ...... 61 Radio ...... 50 Stopwatch ...... 61 Save radio frequencies ...... 50 Listen to the radio ...... 50 15. Sensor...... 62 Voice recorder...... 51 Record sound ...... 51 16. Applications ...... 63 Equalizer...... 52 Launch a game...... 63 Stereo widening ...... 52 Launch an application...... 63 Application options...... 63 13. Push to talk ...... 53 Download an application ...... 63 PTT channels...... 53 Create a channel...... 53 17. SIM services ...... 65 Receive an invitation ...... 54 18. Web...... 66 Switch PTT on and off ...... 54 Set up browsing...... 66 Make and receive a PTT call...... 55 Connect to a service...... 66 Make a channel call...... 55 Make a one-to-one call...... 55 Browse pages...... 67 Make a PTT call to multiple Browse with phone keys...... 67 recipients...... 55 Direct calling...... 67 Receive a PTT call...... 56 Bookmarks...... 67 Receive a bookmark ...... 67

Copyright © 2007 Nokia. All rights reserved. vii Appearance settings ...... 68 Audio...... 77 Security settings ...... 68 Nokia Mini Speakers MD-4...... 77 Cookies...... 68 Nokia Wireless Audio Gateway Scripts over secure connection...... 68 AD-42W...... 77 Download settings...... 69 Carkit...... 78 Service inbox...... 69 Nokia Multimedia Car Kit Service inbox settings...... 69 CK-20W ...... 78 Cache memory...... 69 Data...... 78 Browser security...... 70 Nokia 1 GB microSD Card Security module ...... 70 MU-22...... 78 Certificates ...... 70 22. Care and maintenance...... 79 Digital signature...... 71 23. Additional safety 19. PC connectivity ...... 72 information...... 80 Nokia PC Suite...... 72 Operating environment...... 80 Packet data, HSCSD, and CSD..... 72 Medical devices...... 80 Bluetooth ...... 72 Pacemakers...... 80 Data communication Vehicles ...... 81 applications...... 72 Potentially explosive 20. Battery information ...... 74 environments...... 81 Charging and discharging ...... 74 Emergency calls ...... 82 Nokia battery authentication To make an emergency call: ...... 82 guidelines...... 75 Certification information (SAR) ...... 83 21. Genuine Enhancements ..... 77 Power ...... 77 Index...... 84

Read these simple guidelines. Not SWITCH OFF NEAR following them may be dangerous or BLASTING illegal. Read the complete user guide for Follow any restrictions. Do further information. not use the phone where blasting is in progress. SWITCH ON SAFELY Do not switch the phone on USE SENSIBLY when wireless phone use is Use only in the normal prohibited or when it may position as explained in the cause interference or danger. product documentation. Do not touch the antenna ROAD SAFETY COMES FIRST unnecessarily. Obey all local laws. Always keep your hands free to QUALIFIED SERVICE operate the vehicle while Only qualified personnel may driving. Your first install or repair this product. consideration while driving ENHANCEMENTS AND should be road safety. BATTERIES Use only approved INTERFERENCE enhancements and batteries. All wireless phones may be Do not connect incompatible susceptible to interference, products. which could affect performance. WATER-RESISTANCE Your phone is not SWITCH OFF IN HOSPITALS water-resistant. Keep it dry. Follow any restrictions. Switch the phone off near BACK-UP COPIES medical equipment. Remember to make back-up copies or keep a written SWITCH OFF IN AIRCRAFT record of all important Follow any restrictions. information stored in your Wireless devices can cause phone. interference in aircraft. CONNECTING TO OTHER SWITCH OFF WHEN DEVICES REFUELLING When connecting to any Do not use the phone at a other device, read its user refuelling point. Do not use guide for detailed safety near fuel or chemicals. instructions. Do not connect incompatible products.

Copyright © 2007 Nokia. All rights reserved. ix EMERGENCY CALLS ■ Network services Ensure the phone is switched on and in service. Press the To use the phone you must have service end key as many times as from a wireless service provider. Many of needed to clear the display the features in this device depend on and return to the start features in the wireless network to screen. Enter the emergency function. These network services may not number, then press the call be available on all networks or you may key. Give your location. Do have to make specific arrangements with not end the call until given your service provider before you can permission to do so. utilize network services. Your service provider may need to give you additional ■ About your device instructions for their use and explain what charges will apply. Some networks The wireless device described in this may have limitations that affect how you guide is approved for use on the EGSM can use network services. For instance, 900, and GSM 1800 and 1900 networks. some networks may not support all Contact your service provider for more language-dependent characters and information about networks. services. When using the features in this device, Your service provider may have requested obey all laws and respect the privacy and that certain features be disabled or not legitimate rights of others. activated in your device. If so, they will When taking and using images or video not appear on your device menu. Your clips, obey all laws and respect local device may also have been specially customs as well as privacy and legitimate configured for your network provider. rights of others including copyrights. This configuration may include changes in menu names, menu order and icons. Warning: To use any features in Contact your service provider for more this device, other than the information. alarm clock, the device must be switched on. Do not switch the This device supports WAP 2.0 protocols device on when wireless device (HTTP and SSL) that run on TCP/IP use may cause interference or protocols. Some features of this device, danger. such as multimedia messaging (MMS), browsing, e-mail application, instant messaging, remote synchronization, and content downloading using the browser or MMS, require network support for these technologies.

x Copyright © 2007 Nokia. All rights reserved. ■ Shared memory ■ Enhancements The following features in this device may A few practical rules about accessories share memory: gallery, contacts, text and enhancements: messages, multimedia messages, and • Keep all accessories and instant messages, e-mail, calendar, to-do enhancements out of the reach of notes, JavaTM games and applications, small children. and note application. Use of one or more • When you disconnect the power cord of these features may reduce the memory of any accessory or enhancement, available for the remaining features grasp and pull the plug, not the cord. sharing memory. For example, saving • Check regularly that enhancements many Java applications may use all of the installed in a vehicle are mounted available memory. Your device may and are operating properly. display a message that the memory is full when you try to use a shared memory • Installation of any complex car feature. In this case, delete some of the enhancements must be made by information or entries stored in the qualified personnel only. shared memory features before continuing. Some of the features, such as text messages, may have a certain amount of memory specially allotted to them in addition to the memory shared with other features.

■ Access codes PUK codes The personal unblocking key (PUK) Security code code and the universal personal The security code (5 to 10 digits) unblocking key (UPUK) code (8 helps to protect your phone against digits) is required to change a unauthorized use. The preset code is blocked PIN code and UPIN code, 12345. To change the code, and to respectively. The PUK2 code (8 digits) set the phone to request the code, is required to change a blocked PIN2 see ”Security” p. 42. code. If the codes are not supplied with the SIM card, contact your local PIN codes service provider for the codes. The personal identification number (PIN) code and the universal Barring password personal identification number The barring password (4 digits) is (UPIN) code (4 to 8 digits) help to required when using the Call barring protect your SIM card against service. See ”Security” p. 42. unauthorized use. See ”Security” p. 42. ■ Configuration settings The PIN2 code (4 to 8 digits) may be service supplied with the SIM card and is To use some of the network services, required for some functions. such as mobile Internet services, The module PIN is required to access MMS, Nokia Xpress audio the information in the security messaging, or remote Internet server module. See ”Security module” p. 70. synchronization, your phone needs The signing PIN is required for the the correct configuration settings. digital signature. See ”Digital For more information on availability, signature” p. 71. contact your network operator, service provider, nearest authorized Nokia dealer, or visit the support area on the Nokia Web site, www.nokia-asia.com/5200/support.

xii Copyright © 2007 Nokia. All rights reserved. When you have received the settings ■ Nokia support and as a configuration message, and the contact information settings are not automatically saved For the latest version of this guide, and activated, Configuration sett. downloads, services and additional received is displayed. information related to your Nokia To save the settings, select Show > product, please visit Save. If required, enter the PIN code www.nokia-asia.com/5200/support supplied by the service provider. or your local Nokia web site. You To discard the received settings, may also download free select Exit or Show > Discard. configuration settings such as MMS, GPRS, e-mail, and other services for ■ Download content your phone model at www.nokia-asia.com/phonesettings. You may be able to download new content (for example, themes) to the Should you still require assistance, phone (network service). You may please refer to also be able to download updates of www.nokia-asia.com/contactus. phone software (network service). To check for the nearest Nokia care See ”Phone” p. 39, Phone updates. center location for maintenance For the availability of different services, you may like to visit services, pricing, and tariffs, contact www.nokia-asia.com/repair. your service provider. Important: Use only services that you trust and that offer adequate security and protection against harmful software.

■ Install SIM card and Open the SIM card holder (4), and battery insert the SIM card properly into the holder (5). Close the SIM card holder Always switch the device off and (6). disconnect the charger before removing the battery. Keep all SIM cards out of the reach of small children. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor. This device is intended for use with Replace the battery (7). Slide the BL-5B battery. Always use original back cover into its place (8, 9). Nokia batteries. See ”Nokia battery authentication guidelines” p. 75. To remove the back cover of the phone, push the back cover release button (1), and detach the back cover away from the phone (2). Remove the battery as shown (3).

■ Insert a Use only microSD cards approved by microSD card Nokia for use with this device. Nokia utilizes the approved industry Keep all microSD memory cards out standards for memory cards but not of the reach of small children. all other brands may function 1. Remove the back cover of the correctly or be fully compatible with phone. this device. 2. Insert the card into the microSD card slot with the contact surface ■ Remove the microSD facing backwards, and press it card until it locks into place. Important: Do not remove the microSD card in the middle of an operation when the card is being accessed. Removing the card in the middle of an operation may damage the memory card as well as the device, and data stored on the card may be corrupted. 3. Close the back cover of the 1. Make sure that no application is phone. currently accessing the microSD Use only compatible microSD cards memory card. with this device. Other memory 2. Remove the back cover of the cards, such as reduced size phone. multimedia cards, do not fit in the 3. Press the microSD card slightly in microSD card slot and are not to release the lock, and remove compatible with this device. Using the microSD card from the slot. an incompatible memory card may damage the memory card as well as the device, and data stored on the incompatible card may be corrupted.

■ Charge the battery The charging time depends on the charger used. Charging a BL-5B Check the model number of any battery with the AC-3 charger takes charger before use with this device. approximately 3 hours while the This device is intended for use when phone is in the standby mode. supplied with power from an AC-3 or AC-4 charger. ■ Warning: Use only Open the slide phone batteries, chargers, and To open the slide of the phone, push enhancements approved by the upper part of the phone up. Nokia for use with this particular model. The use of ■ Switch the phone on any other types may and off invalidate any approval or Warning: Do not switch the warranty, and may be phone on when wireless dangerous. phone use is prohibited or For availability of approved when it may cause enhancements, please check with interference or danger. your dealer. When you disconnect Press and hold the power key. See the power cord of any enhancement, ”Keys and parts” p. 6. If the phone grasp and pull the plug, not the cord. asks for a PIN or a UPIN code, enter Connect the charger to a wall socket the code (displayed as ****), and and the lead from the charger to the select OK. socket on the bottom of your phone. Set the time and date Enter the local time, select the time zone of your location in terms of the time difference with respect to Greenwich Mean Time (GMT), and enter the date. See ”Time and date” If the battery is completely p. 33. discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made.

Plug and play service antenna performance and the When you switch on your phone for battery life. the first time, and the phone is in the standby mode, you may be asked to get the configuration settings from your service provider (network service). Confirm or decline the query. See "Connect to service provider support," p. 41, and ”Configuration settings service” p. xii. ■ Headset ■ The headset in the sales box has Antenna been approved by Nokia for use with Your device has an internal antenna. this device. Always listen to music at Note: As with any other a moderate level. Please be advised radio transmitting device, to pay special attention to volume do not touch the antenna level in case you connect any other unnecessarily when the headsets to the device. device is switched on. Do not connect products that create Contact with the antenna an output signal as this may cause affects call quality and may damage to the device. Do not cause the device to operate connect any voltage source to this at a higher power level than connector. otherwise needed. Avoiding contact with the antenna Audio adaptor area when operating the Use an audio adaptor AD-50 to device optimizes the connect a headphone with a 3.5-mm plug to your phone. If the adaptor is connected to the phone the earpiece of the phone will be disconnected. Please note that the adaptor does not support a microphone line.

■ Phone strap

Thread a strap through the eyelet of the phone as shown in the picture and tighten it.

■ Keys and parts Earpiece (1) Music player, start, pause (2) Enhancements connector (3) Call key (4) Left, middle, and right selection keys (5) End key (6) Scroll keys (7) Keypad (8) Charger connector (9) USB connector (10) Power key (11) Phone strap eyelet (12) Camera lens (13) Volume up/PTT key (14) Volume down (15) Camera key (16) Infrared port (17) Self-portrait viewfinder (18) Loudspeaker (19)

■ Standby mode p. 34. Operator variants may have an operator-specific name. When the phone is ready for use, and you have not entered any characters, the phone is in the standby mode. Active standby In the active standby mode there is a Display list of selected phone features and information on the screen that you can directly access. To switch it on or off, select Menu > Settings > Display > Active standby > Active standby mode > On or Off. In the standby mode, scroll up or down to activate the navigation in the list, and select Select or View. Left and right arrows at the beginning and end of a line indicate that further information is available Signal strength of the cellular by scrolling left or right. To end the network (1) active standby mode, select Exit. Battery charge status (2) To organize and change the active Indicators (3) standby mode, activate the Network name or operator logo (4) navigation mode, and select Options and from the available options. Clock (5) Main screen (6) Indicators Function of left selection key (7) is Unread messages. Go to or a shortcut to another function. See ”Left selection key” Unsent, canceled, or failed p. 34. messages. Function of middle selection key (8) Missed call. is Menu. , Connected to the instant Function of right selection key (9) is messaging service, and the Names or a shortcut to another availability status is online function. See ”Right selection key” or offline.

One or several instant The loudspeaker is activated, messages received. or the music stand is connected to the phone. Keypad is locked. Calls are limited to a closed The phone does not ring for user group. an incoming call or text message. The timed profile is selected. The alarm clock is activated. , , , or A headset, hands-free, The countdown timer is loopset, or music stand running. enhancement is connected The stopwatch is running. to the phone. , The phone is registered to ■ the GPRS or EGPRS network. Flight mode You can deactivate all radio , A GPRS or EGPRS frequency functionality and still connection is established. have access to offline games, , The GPRS or EGPRS calendar, and phone numbers. Use connection is suspended (on the flight mode in radio sensitive hold). environments—on board aircraft or in hospitals. When the flight mode is A Bluetooth connection is active, is shown. active. Select Menu > Settings > Profiles > , Push-to-talk connection is Flight > Activate or Personalise. active or suspended. To deactivate the flight mode, select If you have two phone lines, any other profile. the second phone line is In the flight mode you can make an selected. emergency call. Enter the emergency All incoming calls are number, press the call key, and select diverted to another number. Yes when asked Exit flight profile? The phone attempts to make an emergency call.

■ Keypad lock (keyguard) To prevent the keys from being accidentally pressed, close the phone, and select Lock within 3.5 seconds. To unlock the keypad, select Unlock > Ok, or open the phone. If the security keyguard is activated, enter the security code if requested. To answer a call when the keyguard is on, press the call key or open the phone. When you end or reject the call, the keypad automatically locks. For Security keyguard, see ”Phone” p. 39. When the keyguard is on, calls may be possible to the official emergency number programmed into your device.

■ Functions without a SIM card Several functions of your phone may be used without installing a SIM card (for example, the data transfer with a compatible PC or another compatible device). Some functions appear dimmed in the menus and cannot be used. For an emergency call, some networks may require that a valid SIM card is properly inserted in the device.

■ Make a call Speed dialing 1. Enter the phone number, Assign a phone number to one of the including the area code. speed-dialing keys, 2 to 9. See For international calls, press * ”Speed dials” p. 30. Call the number twice for the international prefix in either of the following ways: (the + character replaces the • Press a speed-dialing key, then international access code), enter the call key. the country code, the area code •If Speed dialling is set to On, without the leading 0, if press and hold a speed-dialing necessary, and the phone key until the call begins. See number. Speed dialling in ”Call” p. 39. 2. To call the number, press the call key. Enhanced voice dialing To increase the volume in a call, You can make a phone call by saying press + and to decrease, press -. the name that is saved in the contact 3. To end the call or to cancel the list of the phone. Voice commands call attempt, press the end key, or are language-dependent. To set the close the phone. language, see Voice recognition language in ”Phone” p. 39. To search for a name or phone number that you have saved in Note: Using voice tags may Contacts, see ”Search for a contact” be difficult in a noisy p. 28. Press the call key to call the environment or during an number. emergency, so you should not rely solely upon voice To access the list of dialed numbers, dialing in all circumstances. press the call key once in the standby mode. To call the number, 1. In the standby mode, press and select a number or name, and press hold the right selection key, or the call key. press and hold the volume down key. A short tone is played, and Speak now is displayed.

2. Say the voice command clearly. If ■ Options during a call the voice recognition is Many of the options that you can successful, a list with matches is use during a call are network shown. The phone plays the voice services. For availability, contact command of the match on the your service provider. top of the list. If the result is not the correct one, scroll to another During a call, select Options and entry. from the following options: Using voice commands to carry Call options are Mute or Unmute, out a selected phone function is Contacts, Menu, Lock keypad, similar to voice dialing. See Voice Record, Voice clarity, Loudspeaker or commands in ”My shortcuts” Handset. p. 33. Network services options are Answer or Reject, Hold or Unhold, New call, ■ Answer or reject a call Add to conference, End call, End all calls, and the following: To answer an incoming call, press the call key, or open the phone. To Send DTMF — to send tone strings. end the call, press the end key, or Swap — to switch between the close the phone. active call and the call on hold. To reject an incoming call, press the Transfer — to connect a call on hold end key. To mute the ringing tone, to an active call and disconnect select Silence. yourself. Conference — to make a conference Call waiting call. To answer the waiting call during an Private call — to discuss privately in active call (network service), press a conference call. the call key. The first call is put on Warning: Do not hold the hold. To end the active call, press the device near your ear when end key. the loudspeaker is in use, To activate the Call waiting function, because the volume may be see ”Call” p. 39. extremely loud.

To enter text (for example, when ■ Predictive text input writing messages), use traditional or Predictive text input is based on a predictive text input. When you built-in dictionary to which you can write text, press and hold Options to also add new words. toggle between traditional text input, indicated by , and 1. Start writing a word using the predictive text input, indicated by keys, 2 to 9. Press each key only . Not all languages are once for one letter. supported by predictive text input. 2. When you finish writing the word The character cases are indicated by and it is correct, to confirm it by , , and . To change the adding a space, press 0. character case, press #. To change If the word is not correct, press * from the letter to number mode, repeatedly, and select the word indicated by , press and hold #, from the list. and select Number mode. To change If the ? character is displayed from the number to the letter mode, after the word, the word you press and hold #. intended to write is not in the To set the writing language, select dictionary. To add the word to the Options > Writing language. dictionary, select Spell. Enter the word using traditional text input, ■ Traditional text input and select Save. Press a number key, 1 to 9, To write compound words, enter repeatedly until the desired the first part of the word, and character appears. The characters press the scroll key right to available depend on the selected confirm it. Write the last part of writing language. If the next letter the word, and confirm the word. you want is located on the same key 3. Start writing the next word. as the present one, wait until the cursor appears and enter the letter. The most common punctuation marks and special characters are available under the number key 1.

The phone offers you an extensive range of functions, which are grouped into menus. 1. To access the menu, select Menu. To change the menu view, select Options > Main menu view > List, Grid. To rearrange the menu, scroll to the menu you want to move, and select Options > Organise > Move. Scroll to where you want to move the menu, and select OK. To save the change, select Done > Yes. 2. Scroll through the menu, and select an option (for example, Settings). 3. If the selected menu contains further submenus, select the one that you want (for example, Call). 4. If the selected menu contains further submenus, repeat step 3. 5. Select the setting of your choice. 6. To return to the previous menu level, select Back. To exit the menu, select Exit.

You can read, write, send, and save language options like Chinese, take text, multimedia, e-mail, audio, and up more space limiting the number flash messages, and postcards. All of characters that can be sent in a messages are organized into folders. single message. An indicator at the top of the display ■ Text message shows the total number of With the short message service characters left and the number of (SMS) you can send and receive text messages needed for sending. For messages, and receive messages that example, 673/2 means that there are can contain pictures (network 673 characters left and that the service). message will be sent as a series of 2 messages. Before you can send any text or SMS e-mail message, you must save your message center number. See Write and send a message ”Message settings” p. 25. 1. Select Menu > Messaging > To check SMS e-mail service Create message > Text message. availability and to subscribe to the 2. Enter one or more phone service, contact your service numbers or e-mail addresses in provider. To save an e-mail address the To: field. To retrieve a phone in Contacts, see ”Save details” p. 28. number or e-mail address, select Your device supports the sending of Add. text messages beyond the character 3. For a SMS e-mail, enter a subject limit for a single message. Longer in the Subject: field. messages will be sent as a series of 4. Write your message in the two or more messages. Your service Message: field. provider may charge accordingly. 5. To send the message, select Send. Characters that use accents or other See ”Message sending” p. 16. marks, and characters from some

Read and reply to a message inserted image exceeds this limit, 1. To view a received message, the device may make it smaller so select Show. To view it later, that it can be sent by MMS. select Exit. 1. Select Menu > Messaging > To read the message later, select Create message > Multimedia. Menu > Messaging > Inbox. 2. Write your message. To add a file, 2. To reply to a message, select select Insert and from the Reply and the message type. options. 3. Write the reply message. 3. To view the message before sending it, select Options > 4. To send the message, select Send. Preview. See ”Message sending” p. 16. 4. To send the message, select Send. See ”Message sending” p. 16. ■ Multimedia message 5. Enter one or more phone Note: Only devices that numbers or e-mail addresses in have compatible features the To: field. To retrieve a phone can receive and display number or e-mail address, select multimedia messages. The Add. appearance of a message may vary depending on the 6. To send the message, select Send. receiving device. See ”Message sending” p. 16. A multimedia message can contain some attachments. Write and send a multimedia plus message To check availability and to subscribe to the multimedia The wireless network may limit the messaging service (MMS, network size of MMS messages. If the service), contact your service inserted image exceeds this limit, provider. See ”Message settings” the device may make it smaller so p. 25. that it can be sent by MMS. Any content can be added to the Write and send a multimedia multimedia plus message. Such message content might be images, video clips, sound clips, business cards, calendar The wireless network may limit the notes, themes, streaming links, or size of multimedia messages. If the

Copyright © 2007 Nokia. All rights reserved. 15 Messaging even unsupported files (for example, Note: When the phone is files received with an e-mail). sending the message, the 1. Select Menu > Messaging > animated is shown. This Create message > Multimedia is an indication that the plus. message has been sent by your device to the message 2. Enter one or more phone center number programmed numbers or e-mail addresses in into your device. This is not the To: field. To retrieve a phone an indication that the number or e-mail address, select message has been received Add. at the intended destination. 3. Enter a subject and write your For more details about message. messaging services, check 4. To add a file, select Insert and with your service provider. from the options. If an interruption occurs while the 5. To view the message before message is being sent, the phone sending it, select Options > tries to resend the message a few Preview. times. If these attempts fail, the 6. To send the message, select Send. message remains in the Outbox See ”Message sending” p. 16. folder. To cancel the sending of the messages in the Outbox folder, scroll to the desired message, and select Message sending Options > Cancel sending. Copyright protections may prevent some images, music (including Read and reply to a message ringing tones), and other content from being copied, modified, Important: Exercise caution transferred or forwarded. when opening messages. Multimedia message To send the message, select Send. objects may contain The phone saves the message in the malicious software or Outbox folder, and the sending otherwise be harmful to starts. your device or PC.

1. To view a received message, Before you can use the postcard select Show. To view it later, service you must subscribe to the select Exit. service. To check the availability, and 2. To view the whole message if the costs, and to subscribe to the received message contains a service, contact your network presentation, select Play. operator or service provider. To view the files in the To send a postcard, select Menu > presentation or the attachments, Messaging > Create message > select Options > Objects or Postcard. Fill in the address, Attachments. mandatory editor fields are marked by a *. Scroll to the image field, 3. To reply to the message, select select Insert and an image from the Options > Reply and the gallery, or New image to insert a message type. recent image; then write your 4. Write the reply message. greeting text. To send the message, 5. To send the message, select Send. select Send. See ”Message sending” p. 16. ■ Flash messages ■ Postcards Flash messages are text messages With the postcard messaging service that are instantly displayed upon (network service), create and send reception. Flash messages are not postcards that may contain an automatically saved. image and a greeting text. The postcard is sent to the service Write a message provider using multimedia Select Menu > Messaging > Create messaging. The service provider message > Flash message. Enter the prints the postcard and sends it to recipient’s phone number and write the postal address given with the your message. To have a blinking message. MMS must be activated text, select Options > Insert blink before this service can be used. char.. To end the blinking text range set a second marker.

Receive a message Listen to a message A received flash message is indicated To open a received audio message, with Message: and a few words from select Play; or if more than one the beginning of the message. To message is received, select Show > read the message, select Read. To Play. To listen to the message later, extract numbers and addresses from select Exit. the current message, select Options > Use detail. To save the ■ Memory full message, select Save and the folder When you receive a message, and in which you want to save it. the memory for the messages is full, ■ Memory full. Unable to receive msgs. Nokia Xpress audio is shown. To first delete old messaging messages, select OK > Yes and the You can use the MMS to create and folder. Scroll to the desired message, send a audio message in a and select Delete. If more messages convenient way. MMS must be are to be deleted, select Mark. Mark activated before you can use audio all the messages you want to delete, messages. and select Options > Delete marked.

Create a message ■ Folders 1. Select Menu > Messaging > The phone saves received messages Create message > Audio in the Inbox folder. message. The recorder opens. To Messages that have not yet been use the recorder, see ”Voice sent are saved in the Outbox folder. recorder” p. 51. To set the phone to save the sent 2. Speak your message. messages in the Sent items folder, 3. Enter one or more phone see Save sent messages in ”General numbers in the To: field, or select settings” p. 25. Add to retrieve a number. To edit and send messages that you 4. To send the message, select Send. have written and saved in the Drafts folder, select Menu > Messaging > Drafts. You can move your messages to the Saved items folder. To organize your

Saved items subfolders, select settings as a configuration message. Menu > Messaging > Saved items. See ”Configuration settings service” To add a folder, select Options > Add p. xii. folder. To delete or rename a folder, To activate the e-mail settings, scroll to the desired folder, and select Menu > Messaging > select Options > Delete folder or Message settings > e-mail Rename folder. messages. See ”E-mail messages” Your phone has templates. To create p. 27. a new template, save a message as a This application does not support template. To access the template list, keypad tones. select Menu > Messaging > Saved items > Templates. Setting wizard ■ The setting wizard will start E-mail application automatically if no e-mail settings The e-mail application uses a packet are defined in the phone. To enter data connection (network service) to the settings manually, select allow you to access your e-mail Menu > Messaging > e-mail > account. This e-mail application is Options > Manage accounts > different from the SMS e-mail Options > New. function. To use the e-mail function The Manage accounts options allow on your phone, you need a you to add, delete, and change the compatible e-mail system. e-mail settings. You can write, send, and read e-mail with your phone. Your phone Write and send an e-mail supports POP3 and IMAP4 e-mail servers. You can write your e-mail message before connecting to the e-mail Before you can send and retrieve any service; or connect to the service e-mail messages, you must obtain a first, then write and send your new e-mail account or use your e-mail. current account. To check the availability of your e-mail account, 1. Select Menu > Messaging > contact your e-mail service provider. E-mail > Write new e-mail. Check your e-mail settings with your e-mail service provider. You may receive the e-mail configuration

2. If more than one e-mail account The e-mail application only is defined, select the account downloads e-mail headers at from which you want to send the first. e-mail. 2. Select Back > Inboxes, the 3. Enter the recipient’s e-mail account name, and the new address, write the subject, and message, and select Retrieve to enter the e-mail message. To download the complete e-mail attach a file from Gallery, select message. Options > Attach file. To download new e-mail messages 4. To send the e-mail message, and to send e-mail that has been select Send > Send now. saved in the Outbox folder, select To save the e-mail in the Outbox Options > Send/check e-mail. folder to be sent later, select Send > Send later. Read and reply to e-mail To edit or continue writing your Important: Exercise caution e-mail later, select Options > when opening messages. Save as draft. The e-mail is saved E-mail messages may in Outboxes > Drafts. contain malicious software To send the e-mail later, select or otherwise be harmful to Menu > Messaging > E-mail > your device or PC. Options > Send now or 1. Select Menu > Messaging > Send/check e-mail. E-mail > Inboxes, the account name, and the desired message. Download e-mail 2. To reply to an e-mail, select 1. To download e-mail messages Reply > Original text or Empty that have been sent to your message. To reply to many, select e-mail account, select Menu > Options > Reply to all. Confirm or Messaging > E-mail > Check new edit the e-mail address and e-mail. subject; then write your reply. If more than one e-mail account 3. To send the message, select is defined, select the account Send > Send now. from which you want to download the e-mail.

E-mail folders ■ Instant messaging Your phone saves e-mail that you With instant messaging (IM, have downloaded from your e-mail network service) you can send short, account in the Inboxes folder. The simple text messages to online users. Inboxes folder contains the You have to subscribe to a service following folders: “Account name” and register with the IM service you for incoming e-mail, Archive for want to use. For more information archiving e-mail, Custom 1—Custom about signing up for IM services, 3 for sorting e-mail, Junk where all contact your service provider. spam e-mail is stored, Drafts for To set the required settings for the saving unfinished e-mail, Outbox for IM service, see Connect. settings in saving e-mail that has not been sent, ”Access” p. 21. The icons and texts and Sent items for saving e-mail on the display may vary, depending that has been sent. on the IM service. To manage the folders and their Note: Depending on your e-mail content, select Options to IM service, you may not view the available options of each have access to all of the folder. features described in this guide. Spam filter To activate and define a spam filter, Access select Options > Spam filter > Select Menu > Messaging > Instant Settings in the main e-mail idle messages. Instant messages may be screen. The spam filter allows you to replaced by another term depending put specific senders on a black or on the service provider. If more than white list. Black list sender messages one set of connection settings for IM are filtered to the junk folder. service is available, select the one Unknown and white list sender you want. Select from the following messages are downloaded into the options: account inbox. To blacklist a sender, select the e-mail message in the Login — to connect to the IM service. Inboxes folder and Options > To set the phone to automatically Blacklist sender. connect to the IM service when you switch on the phone; in the login session, select Automatic login: >

On, or select Menu > Messaging > Conversations — shows the list of Instant messages, connect to the IM new and read instant messages or service, and select Options > invitations to IM during the active Settings > Automatic login > On. IM session. Saved convers. — to view, erase, or indicates a new group message. rename the conversations that you indicates a read group message. saved during an IM session. indicates a new instant message. Connect. settings — to edit the indicates a read instant message. settings needed for messaging. indicates an invitation. Connect The icons and texts on the display To connect to the service, access the depends on the IM service. instant messages menu, select the Online — shows the number of IM service, if needed, and select contacts that are online. Login. Offline — shows the number of To disconnect from the IM service, contacts that are offline. select Options > Logout. To start a conversation, expand the Online or the Offline folder, and Sessions scroll to the contact with whom you When connected to the service, your would like to chat, and select Chat. status, as seen by others, is shown in To answer an invitation or to reply to a status line: Status: Online, My a message, expand the status: Busy or Status: App. off. — to Conversations folder, scroll to the change own status, select Change. contact to whom you would like to chat, and select Open. To add Below the status line there are three contacts, see ”Add IM contacts” folders containing your contacts and p. 23. showing their status: Convers., Online and Offline. To expand the Groups > Public groups (not visible if folder, scroll to it, and select Expand groups are not supported by the (or press scroll right); to collapse the network) — The list of bookmarks to folder, select Collapse (or press scroll public groups provided by the service left). provider is displayed. To start a IM session with a group, scroll to a group, and select Join. Enter the screen name that you want to use as

22 Copyright © 2007 Nokia. All rights reserved. Messaging your nickname in the conversation. message is received, select a When you have successfully joined message and Open. the group conversation, you can New messages received during an start a group conversation. You can active conversation are held in create a private group. See ”Groups” Instant messages > Conversations. If p. 24. you receive a message from Search > Users or Groups — to someone who is not in IM contacts, search for other IM users or public the sender ID is displayed. To save a groups on the network by phone new contact that is not in the phone number, screen name, e-mail memory, select Options > Save address, or name. If you select contact. Groups, you can search for a group by a member in the group, or by Participate in a conversation group name, topic, or ID. To join or start an IM session, write your message, and select Send. Options > Chat or Join group — to start the conversation when you If you receive a new message during have found the user or the group a conversation from a person who is that you want. not taking part in the current conversation, is displayed, and Accept or reject an invitation the phone sounds an alert tone. If you receive a new invitation, to Write your message, and select read it, select Read. If more than one Send. Your message is displayed, and invitation is received, select an the reply message is displayed below invitation and Open. To join the your message. private group conversation, select Accept, and enter the screen name Add IM contacts you want to use as your nickname. To reject or delete the invitation, When connected to the IM service, select Options > Reject or Delete. in the IM main menu, select Options > Add contact > By mobile Read an instant message number, Enter ID manually, Search If you receive a new message that is from serv., or Copy from server not a message associated with an (depending on service provider). active conversation, New instant Scroll to a contact. To start a message is displayed. To read it, conversation, select Chat. select Read. If more than one

Block or unblock messages Private When you are in a conversation and Connect to the IM service, and from want to block messages, select the main menu, select Options > Options > Block contact. Create group. Enter the name for the group and the screen name that you To block messages from a specific want to use as your nickname. Mark contact in your contacts list, scroll the private group members in the to the contact in Conversations, contacts list, and write an invitation. Online, or Offline, and select Options > Block contact > OK. ■ Voice messages To unblock a contact, in the IM main menu, select Options > Blocked list. The voice mailbox is a network Scroll to the contact you want to service to which you may need to unblock, and select Unblock > OK. subscribe. For more information contact your service provider. Groups To call your voice mailbox, select Menu > Messaging > Voice You can use the public groups messages > Listen to voice provided by the service provider, or messages. To enter, search for, or create your own private groups for edit your voice mailbox number, an IM conversation. select Voice mailbox number. Public If supported by the network, You can bookmark public groups indicates new voice messages. To that your service provider may call your voice mailbox number, maintain. Connect to the IM service, select Listen. and select Groups > Public groups. Select a group and Join. If you are ■ Info messages not in the group, enter your screen name as your nickname for the You can receive messages on various group. To delete a group from your topics from your service provider list, select Options > Delete group. (network service). For more information, contact your service To search for a group, select provider. Select Menu > Groups > Public groups > Search Messaging > Info messages and groups. from the available options.

■ Service commands Save sent messages > Yes — to set the phone to save the sent messages Write and send service requests in the Sent items folder. (USSD commands) to your service provider (such as activation Overwriting in Sent items > Allowed commands for network services). — to set the phone to overwrite the Select Menu > Messaging > Service old sent messages with the new ones commands. when the message memory is full. This setting is shown only if you set ■ Delete messages Save sent messages > Yes. Font size — to select the font size To delete messages, select Menu > used in messages. Messaging > Delete messages > By message to delete single messages, Graphical smileys > Yes — to set the By folder to delete all messages from phone to replace character-based a folder, or All messages. smileys with graphical ones.

■ SIM messages Text messages SIM messages are specific text The text message settings affect the messages that are saved to your SIM sending, receiving, and viewing of card. You can copy or move those text and SMS e-mail messages. messages from the SIM to the phone Select Menu > Messaging > memory, but not vice versa. To read Message settings > Text messages SIM messages, select Menu > and from the following options: Messaging > Options > SIM Delivery reports > Yes — to ask the messages. network to send delivery reports about your messages (network ■ Message settings service). Message centres > Add centre — to General settings set the phone number and name of General settings are common for the message center that is required text and multimedia messages. for sending text messages. You Select Menu > Messaging > receive this number from your Message settings > General settings service provider. and from the following options:

Message centre in use — to select the configuration message. See message center in use. ”Configuration settings service” E-mail message centres > Add p. xii. You can also enter the settings centre — to set the phone numbers manually. See ”Configuration” p. 41. and name of the e-mail center for Select Menu > Messaging > sending SMS e-mails. Message settings > Multimedia E-mail centre in use — to select the msgs. and from the following SMS e-mail message center in use. options: Message validity — to select the Delivery reports > Yes — to ask the length of time for which the network network to send delivery reports attempts to deliver your message. about your messages (network service). Messages sent via — to select the format of the messages to be sent: Image size (multimedia plus) — to set Text, Paging, or Fax (network the image size in multimedia plus service). messages. Use packet data > Yes — to set GPRS Image size (multimedia) — to set the as the preferred SMS bearer. image size in multimedia messages. Character support > Full — to select Default slide timing — to define the all characters in the messages to be default time between slides in sent as viewed. If you select multimedia messages. Reduced, characters with accents Allow multimedia reception > Yes or and other marks may be converted No — to receive or block the to other characters. multimedia message. If you select In Reply via same centre > Yes — to home network, you cannot receive allow the recipient of your message multimedia messages when outside to send you a reply using your your home network. The default message center (network service). setting of the multimedia message service is generally In home network. Multimedia messages The availability of this menu depends on your phone. The message settings affect the Incoming multimedia messages — sending, receiving, and viewing of to allow the reception of multimedia multimedia messages. You may messages automatically, manually receive the configuration settings after being prompted, or to reject for multimedia messaging as a

26 Copyright © 2007 Nokia. All rights reserved. Messaging the reception. This setting is not shown if Allow multimedia reception is set to No. Allow adverts — to receive or reject advertisements. This setting is not shown if Allow multimedia reception is set to No, or Configuration settings is set to Reject. Configuration settings > Configuration — Only the configurations that support multimedia messaging are shown. Select a service provider, Default, or Personal config. for multimedia messaging. Select Account and a MMS account contained in the active configuration settings.

E-mail messages The settings affect the sending, receiving, and viewing of e-mail. You may receive the settings as a configuration message. See ”Configuration settings service” p. xii. You can also enter the settings manually. See ”Configuration” p. 41. Select Menu > Messaging > Message settings > E-mail messages to display the options.

You can save names and phone ■ Save details numbers (contacts) in the phone In the phone memory you can save memory and in the SIM card different types of phone numbers, a memory. tone or a video clip, and short text The phone memory may save items for a contact. contacts with additional details, The first number you save is such as various phone numbers and automatically set as the default text items. You can also save an number and is indicated with a image for a limited number of frame around the number type contacts. indicator (for example, ). When The SIM card memory can save you select a name from contacts (for names with one phone number example, to make a call), the default attached to them. The contacts number is used unless you select saved in the SIM card memory are another number. indicated by . Make sure that the memory in use is Phone or Phone and SIM. See ■ Search for a contact ”Settings” p. 30. Select Menu > Contacts > Names. Search for the contact to which you Scroll through the list of contacts, or want to add a detail, and select enter the first characters of the Details > Options > Add detail. name you are searching for. Select from the options available.

■ Save names and phone ■ Copy or move contacts numbers To copy or move a contact from the Names and numbers are saved in the phone contact memory to the SIM used memory. To save a name and card memory, or vice versa, select phone number, select Menu > Menu > Contacts > Names. Select Contacts > Names > Options > Add the contact to copy or move and new contact. Options > Copy contact or Move contact.

To copy or move several contacts, ■ Delete contacts select the first contact to copy or To delete all the contacts and the move and Options > Mark. Mark the details attached to them from the other contacts, and select Options > phone or SIM card memory, select Copy marked or Move marked. Menu > Contacts > Delete all To copy or move all contacts from contacts > From phone mem. or the phone contact memory to the From SIM card. SIM card memory, or vice versa, To delete a contact, search for the select Menu > Contacts > Copy desired contact, and select contacts or Move contacts. Options > Delete contact. The SIM card memory can save To delete a number, text item, or an names with one phone number image attached to the contact, attached to them. search for the contact, and select Details. Scroll to the desired detail, ■ Edit contact details and select Options > Delete and Search for the contact, and select from the options available. Details. To edit a name, number, or text item or to change the image, ■ Business cards select Options > Edit. To change the You can send and receive a person’s number type, scroll to the desired contact information from a number, and select Options > compatible device that supports the Change type. To set the selected vCard standard as a business card. number as the default number, select Set as default. To send a business card, search for the contact whose information you ■ want to send, and select Details > Synchronize all Options > Send bus. card. Synchronize your calendar, contacts When you have received a business data, and notes with a remote card, select Show > Save to save the Internet server (network service). For business card in the phone memory. details see ”Synchronize from a To discard the business card, select server” p. 38. Exit > Yes.

■ Settings the speed-dialing number that you want. Select Menu > Contacts > Settings and from the following options: Select Assign, or if a number has already been assigned to the key, Memory in use — to select the SIM select Options > Change. Select card or phone memory for your Search and the contact you want to contacts. Select Phone and SIM to assign. If the Speed dialling function recall names and numbers from both is off, the phone asks whether you memories. In that case, when you want to activate it. See also Speed save names and numbers, they are dialling in ”Call” p. 39. saved in the phone memory. To make a call using the speed- Contacts view — to select how the dialing keys, see ”Speed dialing” names and numbers in Contacts are p. 10. displayed. Name display — to select whether ■ the contact’s first or last name is Info, service, and my displayed first. numbers Font size — to set the font size for Select Menu > Contacts and from the list of contacts. one of these submenus: Memory status — to view the free Info numbers — to call the and used memory capacity. information numbers of your service provider if the numbers are included on your SIM card (network service). ■ Groups Service numbers — to call the service Select Menu > Contacts > Groups to numbers of your service provider if arrange the names and phone the numbers are included on your numbers saved in the memory into SIM card (network service). caller groups with different ringing tones and group images. My numbers — to view the phone numbers assigned to your SIM card, ■ if the numbers are included on your Speed dials SIM card. To assign a number to a speed- dialing key, select Menu > Contacts > Speed dials, and scroll to

The phone registers your missed, Some timers may be reset received, and dialed calls if the during service or software network supports it and the phone is upgrades. switched on and within the network service area. ■ Positioning information To view the information on your The network may send you a calls, select Menu > Log > Missed positioning request (network calls, Received calls, or Dialled service). Contact your service numbers. To view your recent missed provider to subscribe and to agree and received calls and the dialed upon the delivery of positioning numbers chronologically, select Call information. log. To view the contacts to whom To accept or reject the positioning you most recently sent messages, request, select Accept or Reject. If select Message recipients. you miss the request, the phone To view the approximate automatically accepts or rejects it information on your recent according to what you have agreed communications, select Menu > with your network operator or Log > Call duration, Packet data service provider. The phone displays counter, or Packet data conn. timer. 1 missed position request. To view To view how many text and the missed positioning request, multimedia messages you have sent select Show. and received, select Menu > Log > To view the information on the 10 Message log. most recent privacy notifications Note: The actual invoice for and requests or to delete them, calls and services from your select Menu > Log > Positioning > service provider may vary, Position log > Open folder or Delete depending on network all. features, rounding off for billing, taxes, and so forth.

■ Profiles Theme downloads — to open a list of links to download more themes. Your phone has various setting groups called profiles, for which you can customize the phone tones for ■ Tones different events and environments. You can change the tone settings of Select Menu > Settings > Profiles, the selected active profile. the desired profile and from the Select Menu > Settings > Tones. following options: You can find the same settings in the Activate — to activate the selected Profiles menu. See Personalise in profile. ”Profiles” p. 32. Personalise — to personalize the To set the phone to ring only for calls profile. Select the setting you want from phone numbers that belong to to change, and make the changes. a selected caller group, select Alert for. Scroll to the caller group you Timed — to set the profile to be want or All calls, and select Mark. active until a certain time (up to 24 hours) and set the end time. Select Options > Save to save the When the time set for the profile settings or Cancel to leave the expires, the previous profile that was settings unchanged. not timed becomes active. If you select the highest ringing tone level, the ringing tone reaches its ■ Themes highest level after a few seconds. A theme contains elements for personalizing your phone. ■ Display Select Menu > Settings > Themes Select Menu > Settings > Display and from the following options: and from the available options: Select theme — to set a theme. A list Wallpaper — to add the background of folders in Gallery opens. Open the image in the standby mode. Themes folder, and select a theme.

Active standby — to switch the ■ Time and date active standby mode on or off and to To change the time, time zone, and organize and personalize the active date settings, select Menu > standby mode. Settings > Time and date > Time, Standby mode font colour — to Date, or Auto-update of date & time select the color for the texts in the (network service). standby mode. When traveling to a different time Navigation key icons — to display the zone, select Menu > Settings > Time icons of the current navigation key and date > Time > Time zone and the shortcuts in the standby mode when time zone of your location in terms active standby is off. of the time difference with respect Slide animation — to set your phone to Greenwich Mean Time (GMT) or to display an animation and sound a Universal Time Coordinated (UTC). tone when you open and close the The time and date are set according phone depending on the theme. to the time zone and enable your Screen saver > On — to set your phone to display the correct sending phone to display a screen saver. To time of received text or multimedia download more screen savers, select messages. For example, GMT -5 Graphic downloads. To set the time denotes the time zone for New York after which the screen saver is (USA), 5 hours west of activated, select Time-out. Greenwich/London (UK). Power saver — to save some battery Use for India (New Delhi) GMT +5.5, power. The date and a digital clock for Thailand/Indonesia/Vietnam are displayed when no function of GMT +7, for Singapore/Malaysia/ the phone is used for a certain time. Philippines GMT +8, for Australia (Sydney) GMT +10, and for New Font size — to set the font size for Zealand GMT +12. messaging, contacts, and web pages. Operator logo — to set your phone to ■ My shortcuts display or hide the operator logo. With personal shortcuts you get Cell info display > On — to display quick access to often used functions the cell identity, if available from the of the phone. network. Display contrast — to set the display contrast.

Left selection key To select the phone functions to To select a function from the list, activate with a voice command, select Menu > Settings > My select Menu > Settings > My shortcuts > Left selection key. shortcuts > Voice commands and a folder. Scroll to a function. If the left selection key is Go to to indicates that the voice tag is activate a function, in the standby activated. To activate the voice tag, mode, select Go to > Options and select Add. To play the activated from the following options: voice command, select Playback. To Select options — to add a function to use voice commands, see ”Enhanced the shortcut list or to remove one. voice dialing” p. 10. Organise — to rearrange the To manage the voice commands, functions on your personal shortcut scroll to a phone function, and select list. from the following options: Edit or Remove — to change or Right selection key deactivate the voice command of To select a function from the list, the selected function. select Menu > Settings > My Add all or Remove all — to activate shortcuts > Right selection key. or deactivate voice commands to all functions in the voice commands Navigation key list. To assign other phone functions from a predefined list to the ■ Connectivity navigation key (scroll key), select You can connect the phone to a Menu > Settings > My shortcuts > compatible device using Bluetooth Navigation key. wireless technology, infrared, or a USB data cable connection. You can Voice commands also define the settings for EGPRS To call contacts and carry out phone dial-up connections. functions, say the voice commands. Voice commands are language- dependent. To set the language, see Voice recognition language in ”Phone” p. 39.

Bluetooth wireless connection can be subject to technology interference from obstructions such as walls or from other electronic This device is compliant with devices. Bluetooth Specification 2.0 + EDR supporting the following profiles: Set up a Bluetooth connection generic access, network access, Select Menu > Settings > generic object exchange, hands-free, Connectivity > Bluetooth and from headset, object push, file transfer, the following options: dial-up networking, SIM access, and Bluetooth > On or Off — to activate serial port. To ensure interoperability or deactivate the Bluetooth between other devices supporting function. indicates that Bluetooth technology, use Nokia Bluetooth is activated. approved enhancements for this model. Check with the Search for audio enhancements — to manufacturers of other devices to search for compatible Bluetooth determine their compatibility with audio devices. Select the device that this device. you want to connect to the phone. There may be restrictions on using Paired devices — to search for any Bluetooth technology in some Bluetooth device in range. Select locations. Check with your local New to list any Bluetooth device in authorities or service provider. range. Select a device and Pair. Enter an agreed Bluetooth passcode of the Features using Bluetooth technology device (up to 16 characters) to pair or allowing such features to run in (associate) the device to your phone. the background while using other You must only give this passcode features, increase the demand on when you connect to the device for battery power and reduce the the first time. Your phone connects battery life. to the device, and you can start data Bluetooth technology allows you to transfer. connect the phone to a compatible Bluetooth device within 10 meters Bluetooth wireless connection (32 feet). Since devices using Select Menu > Settings > Bluetooth technology communicate Connectivity > Bluetooth. To check using radio waves, your phone and which Bluetooth connection is the other devices do not need to be currently active, select Active in direct line-of-sight, although the devices. To view a list of Bluetooth

Copyright © 2007 Nokia. All rights reserved. 35 Settings devices that are currently paired To activate or deactivate the IR port with the phone, select Paired of your phone, select Menu > devices. Settings > Connectivity > Infrared. Bluetooth settings If data transfer is not started within To define how your phone is shown 2 minutes after the activation of the to other Bluetooth devices, select IR port, the connection is cancelled Menu > Settings > Connectivity > and must be started again. Bluetooth > My phone's visibility or IR connection indicator My phone's name. When is shown continuously, If you are concerned about security, the IR connection is activated, and turn off the Bluetooth function, or your phone is ready to send or set My phone's visibility to Hidden. receive data through its IR port. Always accept only Bluetooth When blinks, your phone is communication from others with trying to connect to the other device, whom you agree. or a connection has been lost.

Infrared Packet data You can set up the phone to send General packet radio service (GPRS) and receive data through its infrared is a network service that allows (IR) port to or from a IRDA mobile phones to send and receive compatible phone or data device. data over an Internet protocol (IP) Do not point the IR beam at anyone's based network. eyes or allow it to interfere with To define how to use the service, other IR devices. Infrared devices are select Menu > Settings > Class 1 laser products. Connectivity > Packet data > Packet When sending or receiving data, data connection and from the ensure that the IR ports of the following options: sending and receiving devices are When needed — to set the packet pointing at each other and that data connection to established when there are no obstructions between an application needs it. The the devices. connection will be closed when the application is terminated.

Always online — to set the phone to Data transfer automatically connect to a packet Synchronize your calendar, contacts data network when you switch the data, and notes with another phone on. compatible device (for example, a Modem settings mobile phone), a compatible PC, or a You can connect the phone using remote Internet server (network Bluetooth wireless technology or service). USB data cable connection to a Your phone allows data transfer with compatible PC and use the phone as a compatible PC or another a modem to enable GPRS compatible device when using the connectivity from the PC. phone without a SIM card. To define the settings for Transfer contact list connections from your PC, select To copy or synchronize data from Menu > Settings > Connectivity > your phone, the name of the device Packet data > Packet data settings > and the settings must be in the list Active access point, and activate the of transfer contacts. If you receive access point you want to use. Select data from another device (for Edit active access point > Packet example, a compatible mobile data access point, enter a name to phone), the corresponding transfer change the access point settings, contact is automatically added to and select OK. Select Packet data the list, using the contact data from access point, enter the access point the other device. Server sync and PC name (APN) to establish a sync are the original items in the list. connection to an network, and select To add a new transfer contact to the OK. list (for example, a mobile phone), You can also set the EGPRS dial-up select Menu > Settings > service settings (access point name) Connectivity > Data transfer > on your PC using the PC Suite. See Options > Add contact > Phone sync ”Nokia PC Suite” p. 72. If you have or Phone copy, and enter the settings set the settings both on your PC and according to the transfer type. on your phone, the PC settings are used.

To edit the copy and synchronize contact your service provider. You settings, select a contact from the may receive the settings as a transfer contact list and Options > configuration message. See Edit. ”Configuration settings service” To delete a transfer contact, select it p. xii and ”Configuration” p. 41. from the transfer contact list and To start the synchronization from Options > Delete. your phone, select Menu > Settings > Connectivity > Data Data transfer with a transfer > Server sync. Depending on compatible device the settings, select Initialising sync For synchronization use Bluetooth or Initialising copy. wireless technology or a cable connection. The other device must Synchronizing for the first time or be activated for receiving data. after an interrupted synchronization may take up to 30 minutes to To start data transfer, select Menu > complete. Settings > Connectivity > Data transfer and the transfer contact from the list other than Server sync USB data cable or PC sync. According to the settings, You can use the USB data cable to the selected data is copied or transfer data between the phone synchronized. and a compatible PC or a printer supporting PictBridge. You can also Synchronize from a compatible use the USB data cable with Nokia PC PC Suite. To synchronize data from calendar, To activate the phone for data notes, and contacts, install the Nokia transfer or image printing, connect PC Suite software of your phone on the data cable. Confirm USB data the PC. Use Bluetooth wireless cable connected. Select mode., and technology or a USB data cable for select from the following options: the synchronization, and start the synchronization from the PC. Nokia mode — to use the cable for PC Suite. Synchronize from a server Printing & media — to use the phone To use a remote Internet server, with a PictBridge compatible printer subscribe to a synchronization or with your compatible PC. service. For more information and the settings required for this service,

Data storage — to connect to a PC Speed dialling > On — to dial the that does not have Nokia software names and phone numbers assigned and use the phone as a data storage to the speed-dialing keys, 2 to 9, by device. pressing and holding the To change the USB mode, select corresponding number key. Menu > Settings > Connectivity > Call waiting > Activate — to have USB data cable > Nokia mode, the network notify you of an Printing & media, or Data storage. incoming call while you have a call in progress (network service). See ■ Call ”Call waiting” p. 11. Select Menu > Settings > Call and Summary after call > On — to briefly from the following options: display the approximate duration and cost (network service) of the call Call divert — to divert your incoming after each call. calls (network service). You may not be able to divert your calls if some Send my caller ID > Yes — to show call barring functions are active. See your phone number to the person Call barring service in ”Security” you are calling (network service). To p. 42. use the setting agreed upon with your service provider, select Set by Voice clarity > Active — to enhance network. speech intelligibility especially in noisy environments. Line for outgoing calls — to select the phone line 1 or 2 for making calls Anykey answer > On — to answer an if supported by your SIM card incoming call by briefly pressing any (network service). key, except the power key, the camera key, the left and right Slide call handling — to set the selection keys, or the end key. phone to answer calls when you open the phone and to end calls Automatic redial > On — to make a when you close the phone. maximum of 10 attempts to connect the call after an unsuccessful call ■ attempt. Phone Select Menu > Settings > Phone and from the following options:

Language settings — To set the Phone updates — to receive phone display language of your phone, software updates from your service select Phone language. Automatic provider (network service). This selects the language according to option may not be available, the information on the SIM card. To depending on your phone. See select the USIM card language, ”Phone software updates” p. 43. select SIM language. To set a Operator selection > Automatic — to language for voice commands, select set the phone to automatically Voice recognition language. select one of the cellular networks Security keyguard — to set the phone available in your area. With Manual to ask for the security code when you can select a network that has a you unlock the keyguard. Enter the roaming agreement with your security code, and select On. service provider. Automatic keyguard — to lock the Confirm SIM service actions — See keypad automatically after a preset ”SIM services” p. 65. time delay when the phone is in the Help text activation — to select standby mode and no function of the whether the phone shows help texts. phone has been used. Select On, and Start-up tone > On — The phone set the time. plays a tone when it is switched on. Welcome note — to write the note that is shown when the phone is ■ switched on. Enhancements This menu or the following options Flight query > On— The phone asks are shown only if the phone is or has every time when it is switched on been connected to a compatible whether the flight profile shall be mobile enhancement. used. With flight profile all radio connections are switched off. The Select Menu > Settings > Enhance. flight profile should be used in areas Select an enhancement, and sensitive to radio emissions. depending on the enhancement, from the following options:

Default profile — to select the profile Activate default in all applications — that you want to be automatically to activate the default configuration activated when you connect to the settings for supported applications. selected enhancement. Preferred access point — to view the Automatic answer — to set the saved access points. Scroll to an phone to answer an incoming call access point, and select Options > automatically after 5 seconds. If Details to view the name of the Incoming call alert is set to Beep service provider, data bearer, and once or Off, automatic answer is off. packet data access point or GSM Lights — to set the lights dial-up number. permanently On. Select Automatic Connect to service provider support to set the lights on for 15 seconds — to download the configuration after a key press. settings from your service provider. Text phone > Use text phone > Yes — Device manager settings — to allow to use the text phone settings or prevent the phone from receiving instead of headset or loopset phone software updates. This option settings. may not be available, depending on your phone. See ”Phone software ■ Configuration updates” p. 43. You can configure your phone with Personal configuration settings — settings that are required for certain to add new personal accounts for services to function correctly. Your various services manually and to service provider may also send you activate or delete them. To add a these settings. See ”Configuration new personal account if you have settings service” p. xii. not added any, select Add new; otherwise, select Options > Add Select Menu > Settings > Configura new. Select the service type, and and from the following options: select and enter each of the required Default configuration settings — to parameters. The parameters differ view the service providers saved in according to the selected service the phone. To set the configuration type. To delete or activate a personal settings of the service provider as account, scroll to it, and select default settings, select Options > Options > Delete or Activate. Set as default.

■ Security recipient’s phone number and the message center number must be When security features that restrict included in the fixed dialing list. calls are in use (such as call barring, closed user group, and fixed dialling) Closed user group — to specify a calls still may be possible to the group of people whom you can call official emergency number and who can call you (network programmed into your device. service). Select Menu > Settings > Security Security level > Phone — to set the and from the following options: phone to ask for the security code whenever a new SIM card is inserted PIN code request and UPIN code into the phone. If you select request — to set the phone to ask for Memory, the phone asks for the your PIN or UPIN code every time the security code when the SIM card phone is switched on. Some SIM memory is selected, and you want to cards do not allow the code request change the memory in use. to be turned off. Access codes — to change the PIN2 code request — to select security code, PIN code, UPIN code, whether the PIN2 code is required PIN2 code, or barring password. when using a specific phone feature which is protected by the PIN2 code. Code in use — to select whether the Some SIM cards do not allow the PIN code or UPIN code should be code request to be turned off. active. Call barring service — to restrict Authority certificates or User incoming calls to and outgoing calls certificates — to view the list of the from your phone (network service). A authority or user certificates barring password is required. downloaded into your phone. See ”Certificates” p. 70. Fixed dialling — to restrict your outgoing calls to selected phone Security module settings — to view numbers if this function is supported Security module details, activate by your SIM card. When the fixed Module PIN request, or change the dialing is on, GPRS connections are module PIN and signing PIN. See also not possible except while sending ”Access codes” p. xii. text messages over a GPRS connection. In this case, the

■ Phone software Request a software update updates Select Menu > Settings > Phone > Your service provider may send Phone updates to request available phone software updates over the air phone software updates from your directly to your device (network service provider. Select Current service). This option may not be software details to display the available, depending on your phone. current software version and check whether an update is needed. Select Warning: If you install a Download phone software to software update, you download and install a phone cannot use the device, even software update. Follow the to make emergency calls, instructions on the display. until the update is completed and the device is restarted. Be sure to backup Install a software update data before accepting a Select Install software update to software update. start the installation, when the installation was cancelled after the Settings download. To allow or disallow phone software The software update may take updates, select Menu > Settings > several minutes. If there are Configura > Device manager problems with the installation, settings > Service provider software contact your service provider. updates and following options: Always allow — to perform all ■ Restore factory software downloads and updates settings automatically. To reset some of the menu settings Always reject — to reject all software to their original values, select updates. Menu > Settings > Restore factory Confirm first — to perform software sett.. Enter the security code. The downloads and updates only after names and phone numbers saved in your confirmation (default setting). Contacts are not deleted.

This menu lets you access a portal to services provided by your network operator. The name and the icon depend on the operator. For more information contact your network operator. The operator can update this menu with a service message. For more information, see ”Service inbox” p. 69.

In this menu you can manage ■ Print images images, video clips, music files, Your device supports Nokia themes, graphics, tones, recordings, XPressPrint. To connect it to a and received files. These files are compatible printer use a data cable stored in the phone memory or an or send the image using Bluetooth to attached microSD memory card and a printer supporting Bluetooth may be arranged in folders. technology. See ”Connectivity” p. 34. Your phone supports an activation You can print images that are in the key system to protect acquired jpg format. The images taken with content. Always check the delivery the camera are automatically saved terms of any content and activation in the jpg format. key before acquiring them, as they may be subject to a fee. Select the image you want to print and Options > Print. Copyright protections may prevent some images, music (including ■ ringing tones), and other content Memory card from being copied, modified, Keep all memory cards out of the transferred or forwarded. reach of small children. To see the list of folders, select You can use the microSD memory Menu > Gallery. card to store your multimedia files To see the available options of a such as video clips, music tracks, folder, select a folder and Options. sound files, and images. To view the list of files in a folder, Some of the folders in Gallery with select a folder and Open. content that the phone uses (for example, Themes) may be stored on To see the available options of a file, the memory card. select a file and Options. To view the folders of the memory card when moving a file, scroll to the memory card, and press the scroll key right.

To insert and remove the microSD Lock the memory card memory card, see ”Insert a microSD To set a password to lock your card” p. 2 and ”Remove the microSD memory card to help prevent card” p. 2. unauthorized use, select Options > Set password. The password can be Format the memory card up to eight characters long. When a memory card is formatted, The password is stored in your phone all data on the card is permanently and you do not have to enter it again lost. Some memory cards are while you are using the memory card supplied preformatted and others on the same phone. If you want to require formatting. Consult your use the memory card on another retailer to find out if you must phone, you are asked for the format the memory card before you password. To delete the password, can use it. select Options > Delete password. To format a memory card, select Menu > Gallery or Applications, the Check memory consumption memory card folder , and To check the memory consumption Options > Format mem. card > Yes. of different data groups and the When formatting is complete, enter available memory for installing new a name for the memory card. applications or software on your memory card, select Options > Details.

When taking and using images or Select Options > Self-timer on to video clips, obey all laws and respect activate the self-timer, or Img. local customs as well as privacy and sequence on to take images in a fast legitimate rights of others. sequence. With the highest image size setting, three images are taken ■ Camera and video in a sequence, with other size settings, five images are taken. You can take images or record video clips with the built-in camera. Select Options > Settings > Image preview time and a preview time to Take an image display the taken images on the display. During the preview time, To access the still image function, select Back to take another image or press the camera key (1) in the Send to send the image as a standby mode; if the video function multimedia message. is on, scroll left or right. Your device supports an image To take an image in landscape capture resolution of 640 x 480 format, hold the phone in a pixels. The image resolution in these horizontal position. To zoom in and materials may appear different. out in the camera mode, use the volume keys (2). Record a video clip To access the video function, press and hold the camera key in the standby mode; or if the camera function is on, scroll left or right. To start the video recording, select Record. To pause the recording, To take an image, select Capture, or select Pause; to resume the press the camera key. The phone recording, select Continue; to stop saves images in Gallery. the recording, select Stop. The phone saves video clips in Gallery.

Camera and video options 1. Select Menu > Media > Media To use a filter, select Options > player > Streaming sett. > Effects > False colours, Greyscale, Configuration. Sepia, Negative, or Solarise. 2. Select a service provider, Default, To change the camera and video or Personal config. for streaming. settings, select Options > Settings. 3. Select Account and a streaming service account contained in the ■ Media player active configuration settings. With the media player you can view, ■ play, and download files, such as Music player images, audio, video, and animated Your phone includes a music player images. You can also view for listening to music tracks or other compatible streaming videos from a MP3 or AAC sound files that you network server (network service). have downloaded from the Web or Select Menu > Media > Media transferred to the phone with the player > Open gallery, Bookmarks, Nokia Music Manager application, Go to address, or Media downloads which is part of Nokia PC Suite. See to select or download media. ”Nokia PC Suite” p. 72. Copyright protections may prevent Select Menu > Media > Media some images, music (including player > FF/Rew interval to set the ringing tones), and other content step width for fast forward or from being copied, modified, rewind. transferred or forwarded. Configuration for a Music files stored in the music folder in the phone memory or on streaming service the memory card will automatically You may receive the configuration be detected and added to the music settings required for streaming as a library during the startup of the configuration message from the phone. service provider. See ”Configuration To open the music player, select settings service” p. xii. You can also Menu > Media > Music player. enter the settings manually. See ”Configuration” p. 41. To activate the settings, do the following:

Playing the music tracks Show tracks — View all available Warning! Listen to music at tracks of the active track list and a moderate level. play the desired track. To play a Continuous exposure to track, scroll to the desired track, and high volume may damage select Play. your hearing. Music library — View all available Operate the music player with the tracks ordered according to Artists, music player key on the phone or Albums, Genres, Composers, or Track with the scroll keys when the music lists. Select Update library to refresh player menu is open. the lists. Track lists generated with To start playing, press . the Nokia Music Manager you will find under Track lists > My track To adjust the volume level, use the lists. volume keys on the side of the Play options — Select Random to phone. play the tracks on the track list in To pause the playing, press . random order. Select Repeat to play To rewind the current track, press the current track or the entire track and hold the scroll key . To fast list repeatedly. forward the current track, press and Media equaliser — to select or hold . Release the key at the define an equalizer setting. position you want to continue the Add to Favourites — to add the music playback. current track to the favorite track To skip to the next track, press the list. scroll key . To skip to the Play via Bluetooth — to connect and beginning of the previous track, play the tracks on an audio press . accessory using Bluetooth To close the music player menu and technology to continue music playback in the Use tone — to set the currently background, press the end key. played music track, for example, as To stop the music player, press and a ringing tone. The availability of hold the end key. this menu depends on your phone. Send — to send the current track by Music player options a multimedia message or using In the Music player menu select from Bluetooth technology. the following options:

Web page — to access a Web page radio frequency in 0.05 MHz associated with the currently played steps, briefly press or . track. 2. To save a frequency to a memory Music downloads — to connect to a location, 1 to 9, press and hold Web service. the corresponding number key. To Memory status — to view the free save a frequency to a memory and used memory capacity. location from 10 to 20, press briefly 1 or 2, and press and hold ■ Radio the desired number key, 0 to 9. The FM radio depends on an antenna 3. Enter the name of the radio other than the wireless device’s station. antenna. A compatible headset or enhancement needs to be attached Listen to the radio to the device for the FM radio to Select Menu > Media > Radio. To function properly. scroll to the desired frequency, select Warning: Listen to music at or , or press the headset key. To a moderate level. select a radio station, briefly press Continuous exposure to the corresponding number keys. To high volume may damage adjust the volume, press the volume your hearing. Do not hold keys. the device near your ear Select from the following options: when the loudspeaker is in Switch off — to turn off the radio. use, because the volume may be extremely loud. Save station — to save a new station (shown if a new station is detected). Select Menu > Media > Radio. Loudspeaker or Headset — to listen To use the graphical keys , , to the radio using the loudspeaker or , or on the display, scroll left headset. or right to the desired key, and select it. Mono output or Stereo output — to listen to the radio in monophonic sound or in stereo. Save radio frequencies Stations — to select the list of saved 1. To start the search, select and stations. To delete or rename a hold or . To change the station, scroll to the desired station, and select Options > Delete station,

50 Copyright © 2007 Nokia. All rights reserved. Media or Rename. Select Visual service ID The recorder cannot be used when a to enter a service ID given by the data call or GPRS connection is visual radio service provider active. (network service). Search all stations — to search for Record sound new radio stations. 1. Select Menu > Media > Set frequency — to enter the Recorder. frequency of the desired radio To use the graphical keys , , station. or on the display, scroll left or Station directory — to access a Web right to the desired key, and site with a list of radio stations. select it. Enable visual service > 2. To start the recording, select . Automatically — to set whether To start the recording during a Visual Radio (network service) starts call, select Options > Record. automatically when you turn on the While recording a call, all parties radio. Some radio stations may send to the call hear a faint beeping. text or graphical information that When recording a call, hold the you can view using the Visual Radio phone in the normal position application. To check the availability near to your ear. To pause the and costs, contact your service recording, select . provider. 3. To end the recording, select . When an application using a packet The recording is saved in data or HSCSD connection is sending Gallery > Recordings. or receiving data, it may interfere To listen to the latest recording, with the radio. select Options > Play last recorded. ■ Voice recorder To send the last recording, select You can record pieces of speech, Options > Send last recorded. sound, or an active call, and save To see the list of recordings in them in Gallery. This is useful when Gallery, select Options > recording a name and phone number Recordings list > Recordings. to write down later.

■ Equalizer You can control the sound quality when using the music player by amplifying or diminishing frequency bands. Select Menu > Media > Equaliser. To activate a set, scroll to one of the equalizer sets, and select Activate. To view, edit, or rename a selected set, select Options > View, Edit, or Rename. Not all sets can be edited or renamed.

■ Stereo widening Stereo widening enhances the audio output of stereo enhancements by enabling a wider stereo sound effect. To change the setting, select Menu > Media > Stereo widening.

If available, select Menu > Push to joined to the channel hear the call talk. simultaneously. Push to talk (PTT) over cellular is a There are different types of PTT two-way radio service available over channels: a GPRS cellular network (network Public channel — Every channel service). member can invite other persons. You can use PTT to have a Private channel — Only persons conversation with one person or which receive an invitation by the with a group of people (channel) channel creator can join in. having compatible devices. While Provisioned channel — A permanent you are connected to the PTT service, channel is created by the service you can use the other functions of provider. the phone. You can set the status of each To check availability and costs, and channel to Active or Inactive. to subscribe to the service, contact your network operator. Roaming The number of active channels and services may be more limited than the number of members per channel for normal calls. is limited. Contact your service provider for details. Before you can use the PTT service, you must define the required PTT service settings. See ”PTT settings” Create a channel p. 57 and ”Configuration settings” To add a channel, select Menu > p. 58. Push to talk > Add channel, and enter the settings in the form fields: ■ PTT channels Channel name: — Enter a name for A PTT channel comprises a group of the new channel. people (for example, friends or a Channel status: — Select Active to workteam) who joined the channel set the channel active or Inactive to after they where invited to. When disable the channel. you call a channel, all members

Chnl. nickname: — Enter your nick 2. To view the nickname of the name to be shown the new channel. person who sent the invitation Chnl. security: > Public channel or and the channel address if the Private channel. channel is not a private channel, select View. Image: — Select Change and an image from the Gallery or the 3. To add the channel to your Default graphic to set a graphic for phone, select Save. the new channel. 4. To set the status for the channel, To send an invitation to the channel, select Active or Inactive. select Yes when the phone requests To reject the invitation, select Exit > it. The recipient of the invitation is Yes, or select View > Discard > Yes. added to the member list of the channel when the invitation is ■ Switch PTT on and off accepted. To send further To connect to the PTT service, select invitations, select Menu > Push to Menu > Push to talk > Switch PTT talk > Channel list, a channel, and on, or press and hold the PTT (volume Options > Send invitation. To send up) key. indicates the PTT the invitation use a text message or connection. indicates that the IR. service is temporarily unavailable. If To add a provisioned channel, select you have added channels to the Menu > Push to talk > Add phone, you are automatically joined channel > Options > Edit add. to the active channels. manually. Enter the Channel addr.: You may assign a default function to provided by your service provider. the PTT (volume up) key to open the channel list, the contacts list or a Receive an invitation single channel or contact. See ”PTT 1. When you receive a text message settings” p. 57. invitation to a channel, Channel To disconnect from the PTT service, invita-tion received: is displayed. select Switch PTT off.

■ Make and receive a PTT to the desired channel, and press and call hold the PTT (volume up) key. Warning: Do not hold the device near your ear when Make a one-to-one call the loudspeaker is in use, To start a one-to-one call from the because the volume may be list of contacts to which you have extremely loud. added the PTT address, select To make a channel call, a one-to-one Contacts > Names or Menu > Push call, or a call to multiple recipients, to talk > Contacts list. Scroll to a you must hold the PTT (volume up) contact, and press and hold the PTT key as long as you talk. To listen to (volume up) key. the response, release the PTT To start a one-to-one call from the (volume up) key. list of PTT channels, select Channel You may be able to check the login list, scroll to the desired channel, status of your contacts in Menu > and select Members. Scroll to the Push to talk > Contacts list. This desired contact, and press and hold service depends on your network the PTT (volume up) key. operator and is only available for To start a one-to-one call from the subscribed contacts. To subscribe a list of callback requests you have contact, select Options > Subscribe received, select Callback inbox. contact, or if one or more contacts Scroll to the desired nickname, and are already marked, Subscribe press and hold the PTT (volume up) marked. key. or indicate that the person is either available or unknown. Make a PTT call to multiple indicates that the person wants recipients not to be disturbed, but can receive You can select multiple PTT contacts callback requests. indicates that from the contact list. The recipients the person has PTT not switched on. receive an incoming call and need to accept the call in order to Make a channel call participate. If supported by your To make a call to a channel, select network operator, you also may Channel list in the PTT menu, scroll select contacts with a phone number but without PTT number. For details, contact your network operator.

1. Select Menu > Push to talk > ■ Callback requests Contacts list, and mark the If you make a one-to-one call and do desired contacts. not get a response, you can send a 2. Press and hold the PTT (volume request for the person to call you up) key to start the call. The back. participating contacts are shown on the display as soon as they Send a callback request join the call. You can send a callback request in 3. Press and hold the PTT (volume the following ways: up) key to talk to them. Release the PTT (volume up) key to hear To send a callback request from the the response. contacts list in the Push to talk menu, select Contacts list. Scroll to a 4. Press the end key to terminate contact, and select Options > Send the call. PTT callback. To send a callback request from Receive a PTT call Contacts, search for the desired A short tone notifies you of an contact, and select Details. Scroll to incoming PTT call. Information, such the PTT address, and select as the channel, the phone number, or Options > Send PTT callback. the nickname (network service) of To send a callback request from the the caller, is displayed. channel list in the PTT menu, select You can either accept or reject an Channel list, and scroll to the desired incoming one-to-one call if you channel. Select Members, scroll to have set the phone to first notify you the desired contact, and select of the one-to-one calls. Options > Send PTT callback. When you press and hold the PTT To send a callback request from the (volume up) key while the caller is callback request list in the Push to talking, you hear a queuing tone, talk menu, select Callback inbox. and Queuing is displayed. Press and Scroll to a contact, and select hold the PTT (volume up) key, and Options > Send PTT callback. wait for the other person to finish; then you can talk immediately.

Respond to a callback To add a contact to the PTT contacts request list, select Menu > Push to talk > Contacts list > Options > Add When someone sends you a callback contact. request, Callback request received is displayed in the standby mode. To add a contact from the channel list, connect to the PTT service, select To open the Callback inbox, select Channel list, and scroll to the desired View. The list of nicknames of the channel. Select Members, scroll to persons who have sent you callback the member whose contact requests is shown. information you want to save, and To make a one-to-one call, select the select Options. To add a new desired request, and press and hold contact, select Save as. To add a PTT the PTT (volume up) key. address to a name in Contacts, select To send a call request back to the Add to contact. sender, select Options > Send PTT callback. ■ PTT settings To delete the request, select Delete. Select Menu > Push to talk > PTT To save a new contact or add the PTT settings. address to a contact from a received 1 to 1 calls > On — to select the callback request, select Options > phone to allow the reception of Save as or Add to contact. incoming one-to-one calls. To make but not receive one-to-one calls, ■ Add a one-to-one select Off. The service provider may contact offer some services that override You can save the names of persons these settings. To set the phone to to whom you often make first notify you of incoming one-to-one calls in the following one-to-one calls with a ringing tone, ways: select Notify. To add a PTT address to a name in PTT key default function — to set the Contacts, search for the desired PTT (volume up) key to following contact, select Details > Options > functions: Open contact list, Open Add detail > PTT address. A contact channel list, Call contact/group. will only appear in the PTT contact Select a contact, a group, or Call PTT list, if the PTT address is entered. channel; and select a channel. When you press and hold the PTT (volume

Copyright © 2007 Nokia. All rights reserved. 57 Push to talk up) key, the selected function is To select the settings for connecting performed. to the service, select Menu > Push Show my login status — to enable or to talk > Configuration settings. disable the sending of the login Select from the following options: status. Configuration — to select a service PTT status in startup > Yes or Ask provider, Default, or Personal config. first — to set the phone to for PTT service. Only the automatically connect to the PTT configurations that support the PTT service when you switch the phone service are shown. on. Account — to select a PTT service Push to talk when abroad — to account contained in the active switch the PTT service on or off when configuration settings. the phone is used outside of the Other parameters are PTT user name, home network. Default nickname, PTT password, Send my PTT address > No — to hide Domain, and Server address. your PTT address from channel and one-to-one calls. ■ Web Select Menu > Push to talk > Web to ■ Configuration settings access the Internet site of your PTT You may receive the settings for provider. connecting to the service from your service provider. See ”Configuration settings service” p. xii. You can enter the settings manually. See ”Configuration” p. 41.

■ Alarm clock sounding the alarm tone. If you select Stop, the device asks whether You can set the phone to alarm at a you want to activate the device for desired time. Select Menu > calls. Select No to switch off the Organiser > Alarm clock. device or Yes to make and receive To set the alarm, select Alarm time, calls. Do not select Yes when and enter the alarm time. To change wireless phone use may cause the alarm time when the alarm time interference or danger. is set, select On. To set the phone to alert you on ■ Calendar selected days of the week, select Select Menu > Organiser > Repeat alarm. Calendar. To select the alarm tone or set the The current day is indicated by a radio as the alarm tone, select Alarm frame. If there are any notes set for tone. If you select the radio as an the day, the day is in bold type, and alarm tone, connect the headset to the beginning of the note is shown the phone. below the calendar. To view the day To set a snooze time-out, select notes, select View. To view a week, Snooze time-out and the time. select Options > Week view. To delete all notes in the calendar, Stop the alarm select the month or week view, and The phone sounds an alert tone even select Options > Delete all notes. if the phone was switched off. To In Settings you can set the date, stop the alarm, select Stop. If you let time, time zone, date or time format, the phone continue to sound the date separator, default view, or the alarm for a minute or select Snooze, first day of the week. In Auto-delete the alarm stops for the time you set notes, you can set the phone to in Snooze time-out, then resumes. delete old notes automatically after If the alarm time is reached while a specified time. the device is switched off, the device switches itself on and starts

Make a calendar note and delete all the notes that you Select Menu > Organiser > have marked as done. Calendar. Scroll to the date, and select Options > Make a note and ■ Notes one of the following note types: To write and send notes, select Meeting, Call, Birthday, Menu > Organiser > Notes. Memo, or Reminder. Fill in To make a note if no note is added, the fields. select Add note; otherwise, select Options > Make a note. Write the Note alarm note, and select Save. The phone displays the note and if set, sounds a tone. With a call note ■ Calculator on the display, to call the The calculator in your phone displayed number, press the call key. provides basic arithmetic and To stop the alarm and to view the trigonometric functions, calculates note, select View. To stop the alarm the square and the square root, the for 10 minutes, select Snooze. inverse of a number, and converts To stop the alarm without viewing currency values. the note, select Exit. Note: This calculator has ■ limited accuracy and is To-do list designed for simple To save a note for a task that you calculations. must do, select Menu > Organiser > Select Menu > Organiser > To-do list. Calculator. Press # for a decimal To make a note if no note is added, point. Scroll to the desired operation select Add note; otherwise, select or function, or select it from the Options > Add. Fill in the fields, and Options. select Save. To save the exchange rate, select To view a note, scroll to it, and select Options > Exchange rate. To View. While viewing a note, you can perform the currency conversion, also select an option to edit the enter the amount to be converted, attributes. You can also select an and select Options > In domestic or option to delete the selected note In foreign.

■ Countdown timer Select Menu > Organiser > Stopwatch and from the following To start the countdown timer, select options: Menu > Organiser > Timer > Normal timer, enter the alarm time, Split timing — to take intermediate and write a note that is displayed times. To start the time observation, when the time expires. To start the select Start. Select Split every time countdown timer, select Start. To that you want to take an change the countdown time, select intermediate time. To stop the time Change time. To stop the timer, observation, select Stop. select Stop timer. To save the measured time, select To have an interval timer with up to Save. 10 intervals started, first enter the To start the time observation again, intervals. Select Menu > select Options > Start. The new time Organiser > Timer > Interval timer. is added to the previous time. To To start the timer, select Start reset the time without saving it, timer > Start. select Reset. Lap timing — to take lap times. ■ Stopwatch Continue — to view the timing that You can measure time, take you have set in the background. intermediate times, or take lap times Show last — to view the most using the stopwatch. During timing, recently measured time if the the other functions of the phone can stopwatch is not reset. be used. To set the stopwatch timing in the background, press the end key. View times or Delete times — to view or delete the saved times. Using the stopwatch or allowing it to run in the background when using other features increases the demand on battery power and reduces the battery life.

With the Sensor application you can Scan now — to find and browse the express yourself by creating a folio Sensor folios of others and that may contain text, images, Bluetooth devices within range. The media items, and a guestbook. After scanning time and range may vary creating a folio you can scan for depending on the environment you other Sensor users. If you find users are in and the number of Bluetooth nearby, you can browse their folios devices found. and send Sensor messages, media My folio — to create, edit, and view files, and guestbook entries. Sensor your folio that other users will see. uses Bluetooth technology and it is My collection — to view downloaded free of charge. and collected folios of other Sensor Note: Most Sensor users. You can check if any Sensor communication features users are currently nearby and send require all parties to install them messages or write entries to the Sensor application. their guestbook. You may choose to Select Menu > Sensor and from the block all communication with a user available options: or remove a block that you have Sensor: inactive or Sensor: active — previously set. to activate or inactivate the Messages — to view messages that application. Sensor users have sent to you. Preferences — to set your Sensor preferences.

In this menu you can manage ■ Application options applications and games. These files Update version — to check if a new are stored in the phone memory or version of the application is an attached microSD memory card available for download from Web and may be arranged in folders. (network service). For options to format or lock and Web page — to provide further unlock the memory card see information or additional data for ”Memory card” p. 45. the application from an Internet ■ page (network service), if available. Launch a game App. access — to restrict the Your phone software includes some application from accessing the games. network. Select Menu > Applications > Games. Scroll to the desired game, ■ Download an and select Open. application To set sounds, lights, and shakes for Your phone supports J2ME Java the game, select Menu > applications. Make sure that the Applications > Options > App. application is compatible with your settings. For more options, see phone before downloading it. ”Application options” p. 63. Important: Only install and ■ use applications and other Launch an application software from sources that Your phone software includes some offer adequate security and Java applications. protection against harmful Select Menu > Applications > software. Collection. Scroll to an application, You can download new Java and select Open. applications and games in different ways.

Use the Nokia Application Installer from PC Suite to download the applications to your phone, or select Menu > Applications > Options > Downloads > App. downloads; the list of available bookmarks is shown. See ”Bookmarks” p. 67. For the availability of different services, pricing, and tariffs, contact your service provider. Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does not warrant or endorse these sites. If you choose to access them, you should take the same precautions, for security or content, as you would with any Internet site.

Your SIM card may provide additional services. You can access this menu only if it is supported by your SIM card. The name and contents of the menu depend on the available services. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor. To set the phone to show you the confirmation messages sent between your phone and the network when you are using the SIM services, select Menu > Settings > Phone > Confirm SIM service actions > Yes. Accessing these services may involve sending messages or making a phone call for which you may be charged.

You can access various mobile configuration settings manually. See Internet services with your phone ”Configuration” p. 41. browser. Important: Use only ■ Connect to a service services that you trust and Ensure that the correct that offer adequate security configuration settings of the service and protection against are activated. harmful software. 1. To select the settings for Check the availability of these connecting to the service, select services, pricing, tariffs, and Menu > Web > Settings > instructions with your service Configuration settings. provider. 2. Select Configuration. Only the With the phone browser you can configurations that support view the services that use wireless browsing service are shown. markup language (WML) or Select a service provider, Default, extensible hypertext markup or Personal config. for browsing. language (XHTML) on their pages. See ”Set up browsing” p. 66. Appearance may vary due to screen 3. Select Account and a browsing size. You may not be able to view all service account contained in the details of the Internet pages. active configuration settings. ■ Set up browsing 4. Select Display terminal window > Yes to perform manual user You may receive the configuration authentication for intranet settings required for browsing as a connections. configuration message from the Make a connection to the service in service provider that offers the one of the following ways: service that you want to use. See ”Configuration settings service” •Select Menu > Web > Home. p. xii. You can also enter all the

• To select a bookmark of the ■ Bookmarks service, select Menu > Web > You can save page addresses as Bookmarks. bookmarks in the phone memory. • To select the last URL, select 1. While browsing, select Options > Menu > Web > Last web address. Bookmarks; or in the standby • To enter the address of the mode, select Menu > Web > service, select Menu > Web > Go Bookmarks. to address. Enter the address of 2. Scroll to a bookmark, and select the service, and select OK. it; or press the call key to make a connection to the page ■ Browse pages associated with the bookmark. After you make a connection to the 3. Select Options to view, edit, service, you can start browsing its delete, or send the bookmark; to pages. The function of the phone create a new bookmark; or to keys may vary in different services. save the bookmark to a folder. Follow the text guides on the phone Your device may have some display. For more information, bookmarks loaded for sites not contact your service provider. affiliated with Nokia. Nokia does not warrant or endorse these sites. If you Browse with phone keys choose to access them, you should To browse through the page, scroll in take the same precautions, for any direction. security or content, as you would To select an item, press the call key, with any Internet site. or select Select. To enter letters and numbers, press Receive a bookmark the 0 to 9 keys. To enter special When you have received a bookmark characters, press *. that is sent as a bookmark, 1 bookmark received is displayed. To Direct calling view the bookmark, select Show. While browsing, you can make a phone call, and save a name and a phone number from a page.

■ Appearance settings JavaScript > Enable — to enable the Java scripts. While browsing, select Options > Other options > Appear. settings; or in the standby mode, select Menu > ■ Security settings Web > Settings > Appearance settings and from the following Cookies options: A cookie is data that a site saves in Text wrapping — to select how the the cache memory of your phone. text shall appear on the display. Cookies are saved until you clear the Font size — to set the font size. cache memory. See ”Cache memory” p. 69. Show images > No — to hide images on the page. While browsing, select Options > Other options > Security > Cookie Alerts > Alert for unsecure settings; or in the standby mode, connection > Yes — to set the phone select Menu > Web > Settings > to alert when a secure connection Security settings > Cookies. To allow changes to an unsecure one during or prevent the phone from receiving browsing. cookies, select Allow or Reject. Alerts > Alert for unsecure items > Yes — to set the phone to alert when Scripts over secure a secure page contains an unsecure connection item. These alerts do not guarantee a secure connection. For more You can select whether to allow the information, see ”Browser security” running of scripts from a secure p. 70. page. The phone supports WML scripts. Character encoding > Content encoding — to select the encoding While browsing, to allow the scripts, for the browser page content. select Options > Other options > Security > WMLScript sett.; or in the Character encoding > Unicode standby mode, select Menu > (UTF-8) web addresses > On — to set Web > Settings > Security settings > the phone to send a URL as a UTF-8 WMLScripts over secure encoding. connection > Allow. Screen size > Full or Small— to set the screen layout.

■ Download settings Service inbox settings To automatically save all Select Menu > Web > Settings > downloaded files in Gallery, select Service inbox settings. Menu > Web > Settings > To set whether you want to receive Downloading settings > Automatic service messages, select Service saving > On. messages > On or Off. To set the phone to receive service ■ Service inbox messages only from content authors The phone is able to receive service approved by the service provider, messages sent by your service select Message filter > On. To view provider (network service). Service the list of the approved content messages are notifications (for authors, select Trusted channels. example, news headlines), and they To set the phone to automatically may contain a text message or an activate the browser from the address of a service. standby mode when the phone has To access the Service inbox in the received a service message, select standby mode, when you have Automatic connection > On. If you received a service message, select select Off, the phone activates the Show. If you select Exit, the browser only after you select message is moved to the Service Retrieve when the phone has inbox. To access the Service inbox received a service message. later, select Menu > Web > Service inbox. ■ Cache memory To access the Service inbox while A cache is a memory location that is browsing, select Options > Other used to store data temporarily. If you options > Service inbox. Scroll to the have tried to access or have accessed message you want, and to activate confidential information requiring the browser and download the passwords, empty the cache after marked content, select Retrieve. To each use. The information or services display detailed information on the you have accessed is stored in the service notification or delete the cache. message, select Options > Details or Delete.

To empty the cache while browsing, Certificates select Options > Other options > Important: Even if the use Clear the cache; in the standby of certificates makes the mode, select Menu > Web > Clear risks involved in remote the cache. connections and software installation considerably ■ Browser security smaller, they must be used Security features may be required correctly in order to benefit for some services, such as online from increased security. The banking or shopping. For such existence of a certificate connections you need security does not offer any certificates and possibly a security protection by itself; the module, which may be available on certificate manager must your SIM card. For more information, contain correct, authentic, contact your service provider. or trusted certificates for increased security to be Security module available. Certificates have a restricted lifetime. If The security module improves Expired certificate or security services for applications Certificate not valid yet is requiring a browser connection, and shown even if the certificate allows you to use a digital signature. should be valid, check that The security module may contain the current date and time in certificates as well as private and your device are correct. public keys. The certificates are Before changing any saved in the security module by the certificate settings, you service provider. must make sure that you To view or change the security really trust the owner of the module settings, select Menu > certificate and that the Settings > Security > Security certificate really belongs to module settings. the listed owner.

There are three kinds of certificates: To make a digital signature, select a server certificates, authority link on a page (for example, the title certificates, and user certificates. of the book you want to buy and its You may receive these certificates price). The text to sign is shown, from your service provider. Authority which may include the amount and certificates and user certificates may date. also be saved in the security module Check that the header text is Read by the service provider. and that the digital signature icon To view the list of the authority or is shown. user certificates downloaded into If the digital signature icon does not your phone, select Menu > appear, there is a security breach, Settings > Security > Authority and you should not enter any certificates or User certificates. personal data such as your signing is displayed during a PIN. connection, if the data transmission To sign the text, read all of the text between the phone and the content first, and select Sign. server is encrypted. The text may not fit within a single The security icon does not indicate screen. Therefore, make sure to scroll that the data transmission between through and read all of the text the gateway and the content server before signing. (or place where the requested Select the user certificate you want resource is stored) is secure. The to use. Enter the signing PIN. The service provider secures the data digital signature icon disappears, transmission between the gateway and the service may display a and the content server. confirmation of your purchase. Digital signature You can make digital signatures with your phone if your SIM card has a security module. Using the digital signature can be the same as signing your name to a paper bill, contract, or other document.

You can send and receive e-mail, and The use of HSCSD services consumes access the Internet when your phone the phone battery faster than is connected to a compatible PC normal voice or data calls. through a Bluetooth, infrared, or a data cable connection. You can use ■ Bluetooth your phone with a variety of PC Use the Bluetooth technology to connectivity and data connect your compatible Laptop to communications applications. the Internet. Your phone must have ■ activated a service provider that Nokia PC Suite supports Internet access and your PC With Nokia PC Suite you can has to support Bluetooth PAN synchronize contacts, calendar, (Personal Area Network). After notes, and to-do notes between connecting to the network access your phone and the compatible PC point (NAP) service of the phone and or a remote Internet server (network pairing with your PC your phone service). You may find more automatically opens a packet data information and PC Suite on the connection to the Internet. PC Suite Nokia Web site at software installation is not www.nokia-asia.com/5200/support necessary when using the NAP or your local Nokia Web site. service of the phone. See ”Bluetooth wireless technology” ■ Packet data, HSCSD, p. 35. and CSD With your phone you can use the ■ Data communication packet data, high-speed circuit applications switched data (HSCSD), and circuit For information on using a data switched data (CSD, GSM data) data communication application, refer to services. For availability and the documentation provided with it. subscription to data services, contact your network operator or Making or answering phone calls service provider. See ”Modem during a computer connection is not settings” p. 37. recommended, as it might disrupt the operation.

For better performance during data calls, place the phone on a stationary surface with the keypad facing downward. Do not move the phone by holding it in your hand during a data call.

■ Charging and If the battery is completely discharging discharged, it may take a few minutes before the charging Your device is powered by a indicator appears on the display or rechargeable battery. The full before any calls can be made. performance of a new battery is achieved only after two or three Use the battery only for its intended complete charge and discharge purpose. Never use any charger or cycles. The battery can be charged battery that is damaged. and discharged hundreds of times, Do not short-circuit the battery. but it will eventually wear out. When Accidental short-circuiting can the talk and standby times are occur when a metallic object such as noticeably shorter than normal, a coin, clip, or pen causes direct replace the battery. Use only Nokia connection of the positive (+) and approved batteries, and recharge negative (-) terminals of the battery. your battery only with Nokia (These look like metal strips on the approved chargers designated for battery.) This might happen, for this device. example, when you carry a spare If a replacement battery is being battery in your pocket or purse. used for the first time or if the Short-circuiting the terminals may battery has not been used for a damage the battery or the prolonged period, it may be connecting object. necessary to connect the charger Leaving the battery in hot or cold and then disconnect and reconnect places, such as in a closed car in it to start the charging. summer or winter conditions, will Unplug the charger from the reduce the capacity and lifetime of electrical plug and the device when the battery. Always try to keep the not in use. Do not leave fully charged battery between 15°C and 25°C battery connected to a charger, since (59°F and 77°F). A device with a hot overcharging may shorten its or cold battery may not work lifetime. If left unused, a fully temporarily, even when the battery charged battery will lose its charge is fully charged. Battery over time.

74 Copyright © 2007 Nokia. All rights reserved. Battery information performance is particularly limited Original Enhancements logo in temperatures well below freezing. when looking from another angle. Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste. 2. When you angle the hologram ■ Nokia battery left, right, down, and up, you authentication should see 1, 2, 3, and 4 dots on guidelines each side respectively. Always use original Nokia batteries for your safety. To check that you are getting an original Nokia battery, purchase it from an authorised Nokia dealer, and inspect the hologram label using the following steps: What if your battery is not Successful completion of the steps is authentic? not a total assurance of the authenticity of the battery. If you If you cannot confirm that your have any reason to believe that your Nokia battery with the hologram on battery is not an authentic, original the label is an authentic Nokia Nokia battery, you should refrain battery, please do not use the from using it. If authenticity cannot battery. The use of a battery that is be verified, return the battery to the not approved by the manufacturer place of purchase. may be dangerous and may result in poor performance and damage to Authenticate hologram your device and its enhancements. It 1. When you look at the hologram may also invalidate any approval or on the label, you should see the warranty applying to the device. Nokia connecting hands symbol from one angle and the Nokia

To find out more about original Nokia batteries, visit www.nokia-asia.com/batterycheck.

A new extensive * Variation in operation times may range of occur depending on SIM card, network enhancements is and usage settings, usage style and available for your environments. Use of FM radio and integrated hands-free will affect phone. Select the talktime and standby. enhancements which accommodate your specific communication needs. ■ Some of the enhancements are described Audio in detail below. For availability of the enhancements, Nokia Mini Speakers MD-4 please check with your local dealer. A few These compact stereo speakers improve practical rules for enhancements audio quality when you listen to music or operation: the radio on your compatible Nokia • Keep the enhancements out of small phone or audio device. The speakers have a 3.5-mm stereo audio plug. With the children’s reach. supplied AD-50 adapter, the speakers can • When you disconnect the power cord be connected to a compatible device that of any enhancement, grasp and pull has a 2.5-mm audio connector. the plug, not the cord. • Check regularly that all mobile phone Nokia Wireless Audio equipment in a vehicle is mounted and operating properly. Gateway AD-42W Bring the convenience of wireless stereo Use only batteries, chargers and enhancements approved by the phone audio connectivity to your home with the Nokia Wireless Audio Gateway AD-42W. manufacturer. The use of any other Listen to the music stored in your mobile types may invalidate any approval or warranty applying to the phone, and phone, computer or other compatible device wirelessly on your home stereo. may be dangerous. Then just flick a switch and listen to music from your compatible home stereo ■ Power on your Bluetooth wireless headset.

Type Tech Talk- Standby* Music time* Time BL-5B Li-ion up to up to > 12 192 mins 263 hours hours

■ Carkit

Nokia Multimedia Car Kit CK-20W Driving has never been this easy. The Nokia Multimedia Car Kit CK-20W integrates the comfort of handsfree usage with superior audio and multimedia options. Compatible with the Nokia Navigation Pack LD-2 for a high-quality navigation solution.

■ Data

Nokia 1 GB microSD Card MU-22 This microSD Card provides 1 GB of removable storage and increases the available memory for data, music and software applications.

Your device is a product of superior • Do not use harsh chemicals, cleaning design and craftsmanship and should be solvents, or strong detergents to treated with care. The suggestions below clean the device. will help you protect your warranty • Do not paint the device. Paint can coverage. clog the moving parts and prevent • Keep the device dry. Precipitation, proper operation. humidity and all types of liquids or • Do not touch the main display with moisture can contain minerals that hard or angular materials. Objects will corrode electronic circuits. If your like earrings or jewellery may scratch device does get wet, remove the the display. battery and allow the device to dry • Use a soft, clean, dry cloth to clean completely before replacing it. any lenses (such as camera, proximity • Do not use or store the device in sensor, and light sensor lenses). dusty, dirty areas. Its moving parts • Use only the supplied or an approved and electronic components can be replacement antenna. Unauthorized damaged. antennas, modifications, or • Do not store the device in hot areas. attachments could damage the High temperatures can shorten the device and may violate regulations life of electronic devices, damage governing radio devices. batteries, and warp or melt certain • Use chargers indoors. plastics. • Always create a backup of data you • Do not store the device in cold areas. want to keep (such as contacts and When the device returns to its normal calendar notes) before sending your temperature, moisture can form device to a service facility. inside the device and damage All of the above suggestions apply electronic circuit boards. equally to your device, battery, charger, • Do not attempt to open the device or any enhancement. If any device is not other than as instructed in this guide. working properly, take it to the nearest • Do not drop, knock, or shake the authorized service facility for service. device. Rough handling can break internal circuit boards and fine mechanics.

Your device and its enhancements may ■ Medical devices contain small parts. Keep them out of the Operation of any radio transmitting reach of small children. equipment, including wireless phones, may interfere with the functionality of ■ Operating environment inadequately protected medical devices. Remember to follow any special Consult a physician or the manufacturer regulations in force in any area, and of the medical device to determine if they always switch off your device when its are adequately shielded from external RF use is prohibited or when it may cause energy or if you have any questions. interference or danger. Use the device Switch off your device in health care only in its normal operating positions. facilities when any regulations posted in This device meets RF exposure guidelines these areas instruct you to do so. when used either in the normal use Hospitals or health care facilities may be position against the ear or when using equipment that could be sensitive positioned at least 2.2 centimeters (7/8 to external RF energy. inch) away from the body. When a carry case, belt clip or holder is used for Pacemakers body-worn operation, it should not Pacemaker manufacturers recommend contain metal and should position the that a minimum separation of device the above-stated distance from 15.3 centimeters (6 inches) be your body. maintained between a wireless phone To transmit data files or messages, this and a pacemaker to avoid potential device requires a quality connection to interference with the pacemaker. These the network. In some cases, transmission recommendations are consistent with of data files or messages may be delayed the independent research by and until such a connection is available. recommendations of Wireless Ensure that the above separation Technology Research. Persons with distance instructions are followed until pacemakers should do the following: the transmission is completed. • Always keep the device more than Parts of the device are magnetic. Metallic 15.3 centimeters (6 inches) from the materials may be attracted to the device. pacemaker Do not place credit cards or other • Not carry the device in a breast magnetic storage media near the device, pocket because information stored on them may • Hold the device to the ear opposite be erased. the pacemaker to minimize the potential for interference.

If you suspect interference, switch off Using your device while flying in aircraft your device, and move the device away. is prohibited. Switch off your device before boarding an aircraft. The use of ■ Vehicles wireless teledevices in an aircraft may be RF signals may affect improperly dangerous to the operation of the installed or inadequately shielded aircraft, disrupt the wireless telephone electronic systems in motor vehicles such network, and may be illegal. as electronic fuel injection systems, electronic antiskid (antilock) braking ■ Potentially explosive systems, electronic speed control environments systems, and air bag systems. For more Switch off your device when in any area information, check with the with a potentially explosive atmosphere manufacturer or its representative of and obey all signs and instructions. your vehicle or any equipment that has Potentially explosive atmospheres been added. include areas where you would normally Only qualified personnel should service be advised to turn off your vehicle the device, or install the device in a engine. Sparks in such areas could cause vehicle. Faulty installation or service may an explosion or fire resulting in bodily be dangerous and may invalidate any injury or even death. Switch off the warranty that may apply to the device. device at refueling points such as near Check regularly that all wireless device gas pumps at service stations. Observe equipment in your vehicle is mounted restrictions on the use of radio and operating properly. Do not store or equipment in fuel depots, storage, and carry flammable liquids, gases, or distribution areas; chemical plants; or explosive materials in the same where blasting operations are in compartment as the device, its parts, or progress. Areas with a potentially enhancements. For vehicles equipped explosive atmosphere are often but not with an air bag, remember that air bags always clearly marked. They include inflate with great force. Do not place below deck on boats, chemical transfer or objects, including installed or portable storage facilities, vehicles using liquefied wireless equipment in the area over the petroleum gas (such as propane or air bag or in the air bag deployment area. butane), and areas where the air contains If in-vehicle wireless equipment is chemicals or particles such as grain, dust, improperly installed and the air bag or metal powders. inflates, serious injury could result.

■ Emergency calls 3. Enter the official emergency number Important: Wireless phones, for your present location. Emergency including this device, operate numbers vary by location. using radio signals, wireless 4. Press the call key. networks, landline networks, If certain features are in use, you may and user-programmed first need to turn those features off functions. Because of this, before you can make an emergency call. connections in all conditions If the device is in the offline or flight cannot be guaranteed. You mode, you must change the profile to should never rely solely on any activate the phone function before you wireless device for essential can make an emergency call. Consult this communications like medical guide or your service provider for more emergencies. information. When making an emergency call, give all To make an emergency call: the necessary information as accurately 1. If the device is not on, switch it on. as possible. Your wireless device may be Check for adequate signal strength. the only means of communication at the Some networks may require that a scene of an accident. Do not end the call valid SIM card is properly inserted in until given permission to do so. the device. 2. Press the end key as many times as needed to clear the display and ready the device for calls.

■ Certification information Use of device accessories and (SAR) enhancements may result in different THIS MOBILE DEVICE MEETS GUIDELINES SAR values. SAR values may vary FOR EXPOSURE TO RADIO WAVES. depending on national reporting and testing requirements and the network Your mobile device is a radio transmitter and receiver. It is designed not to exceed band. Additional SAR information may be provided under product information at the limits for exposure to radio waves www.nokia-asia.com. recommended by international guidelines. These guidelines were * SAR values may vary depending on developed by the independent scientific national reporting requirements and the organization ICNIRP and include safety network band. For SAR information margins designed to assure the in other regions, please look under protection of all persons, regardless of product information at www.nokia.com. age and health. The exposure guidelines for mobile devices employ a unit of measurement known as the Specific Absorption Rate or SAR. The SAR limit stated in the ICNIRP guidelines is 2.0 watts/kilogram (W/kg) averaged over 10 grams of tissue. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. The actual SAR level of an operating device can be below the maximum value because the device is designed to use only the power required to reach the network. That amount changes depending on a number of factors such as how close you are to a network base station. The highest SAR value under the ICNIRP guidelines for use of the device at the ear is 0.90W/kg.

A C About your device x Cache memory 69 Access 21 Calculator 60 Access codes xii Calendar 59 Accessories. See enhancements. Call Active standby 7, 33 Functions 10 Add a one-to-one contact 57 Log 31 Add IM contacts 23 Options 11 Alarm clock 59 Settings 39 Waiting 11 Answer or reject a call 11 Call key 6 Antenna 4 Call register. See call log. Application options 63 Callback requests 56 Applications 63 Calls 10–11 Audio 77 Camera 47 Adaptor 4 Messages 18 Camera and video options 48 Camera key 6 B Carkit 78 Certificates 70 Barring password xii Certification information (SAR) 83 Battery Character Case 12 Charging 3 Charging, discharging 74 Charge the battery 3 Installation 1 Charger connector 6 Battery information 74 Check memory consumption 46 Blacklist 21 Clock settings 33 Block or unblock messages 24 Codes xii Bluetooth 35, 72 Configuration 41 Bookmarks 67 Setting service xii Settings 4 Browse pages 67 Browse with phone keys 67 Connect 22 Connect to a service 66 Browser Appearance settings 68 Connector Bookmarks 67 Charger 6 Security 68 USB 6 Set up 66 Contact information xiii Browser security 70 Business cards 29

84 Copyright © 2007 Nokia. All rights reserved. Contacts 28 Equalizer 52 Copy 28 Explosive environments 81 Delete 29 Edit 29 F Groups 30 My numbers 30 Factory settings 43 Save 28 Flash messages 17 Search 28 Flight mode 8 Service numbers 30 FM radio 50 Settings 30 Font size 33 Speed dialing 30 Format the memory card 46 Cookies 68 Functions without a SIM card 9 Countdown timer 61 Create a channel 53 G Create a message 18 Gallery 45 Customer service xiii Games 63 General information xii D General packet radio service 36, 72 Data 78 General settings 25 Cable 38 Genuine Enhancements 77 Communication 72 Get started 1 Transfer 37 GPRS. See general packet radio service. Date settings 33 Digital signature 71 H Direct calling 67 Display 7, 32 Handsfree. See loudspeaker. Download an application 63 Headset 4 Download e-mail 20 Downloads xiii, 69 I Image 47 E IMAP4 19 Earpiece 6 Indicators 7 E-mail application 19 Info messages 24 E-mail folders 21 Infrared E-mail messages 27 Connection 36 Infrared port 6 Emergency calls 82 Insert a microSD card 2 End Call 10 Install a software update 43 Key 6 Install SIM card and battery 1 Enhancements xi, 40 Instant messaging 21 Enhancements connector 6 Internet 66

Copyright © 2007 Nokia. All rights reserved. 85 IR. See infrared. Messages Audio message 18 J Delete 25 Flash message 17 Junk folder 21 Info messages 24 Length indicator 14 K Postcards 17 Keyguard 9 Service commands 25 Keypad 6, 9 Text 14 Keys 6 Voice message 24 Messaging 14 L MMS. See multimedia messages. Multimedia messages 15, 26 Language settings 40 Music player 48 Launch an application 63 Music player options 49 Left selection key 34 Listen to a message 18 N Listen to the radio 50 Location. See positioning. 31 Navigation Key 34 Lock the memory card 46 Menus 13 Log 31 Network Loudspeaker 6 11 , Name on display 7 Services x M Nokia 1 GB microSD Card MU-22 78 Maintenance 79 Nokia battery authentication guidelines 75 Maintenance service xiii Nokia contact information xiii Make a channel call 55 Nokia Mini Speakers MD-4 77 Make a one-to-one call 55 Nokia Multimedia Car Kit CK-20W 78 Make a PTT call to multiple recipients 55 Nokia support xiii Make and receive a PTT call 55 Nokia Wireless Audio Gateway AD-42W 77 Media 47 Note alarm 60 Media player 48 Notes 60 Medical devices 80 Numbers 30 Memory Card 2, 45 O Full 18 Operating environment 80 Menu 13 Operator menu 44 Message Organizer 59 Center number 14 Folder 18 Settings 25–27 P Message sending 16 Pacemakers 80

86 Copyright © 2007 Nokia. All rights reserved. Packet data Request a software update 43 See general packet radio service. Respond to a callback request 57 Parts 6 Right selection key 34 PC connectivity 72 Ringing tones 32 PC Suite 72 Phone S Configuration 41 Safety information ix, 80 Open 3 Save details 28 Settings 39 Updates 40, 43 Save radio frequencies 50 Phone software updates 43 Screen saver 33 PictBridge 38 Scripts over secure connection 68 PIN codes xii, 3 Scroll 13 Playing the music tracks 49 Scroll key 6 Plug and play service 4 Security POP3 19 Codes xii Module 70 Positioning information 31 Settings 42 Postcards 17 Selection keys 6 Power 77 Send a callback request 56 Key 6 Saver 33 sensor 62 Service Predictive text input 12 Commands 25 Print images 45 Inbox 69 Profiles 32 Messages 69 PTT channels 53 Numbers 30 PTT. See push to talk. Services 66 PUK codes xii Sessions 22 Push to talk 53–58 Set the time and date 3 Setting wizard 19 R Settings 32, 43 Radio 50 Active standby 33 Read and reply to a message 15, 16 Call 39 Read and reply to e-mail 20 Clock 33 Receive a bookmark 67 Configuration 41 Connectivity 34 Receive a message 18 Data transfer 37 Receive a PTT call 56 Date 33 Receive an invitation 54 Display 32 Record sound 51 Download 69 Recorder 51 Enhancements 40 Repair service xiii GPRS 36 Infrared 36

Copyright © 2007 Nokia. All rights reserved. 87 Messages 25 T My shortcuts 33 Phone 39 Take an image 47 Profiles 32 Text Push to talk 57, 58 Message 14 Restore factory settings 43 Phone 41 Security 42 Writing 12 Service inbox 69 Text messages 25 Slide animation 33 Themes 32 Themes 32 Time settings 33 Time 33 To-do list 60 Tones 32 Tones 32 USB data cable 38 Traditional text input 12 Wallpaper 32 Shared memory xi U Shortcuts 33 Signal strength 7 Unlock keypad 9 SIM UPIN 3 Card 9 USB 6 Card installation 1 Messages 25 V Services 65 Vehicles 81 SMS. See text messages Video clip 47 Software updates 40, 43 Visual radio 51 Spam filter 21 Voice Speakerphone. See loudspeaker. Commands 34 Speed dialing 10, 30 Dialing 10 Standby mode 7, 33 Messages 24 Status indicators 7 Recorder 51 Stereo widening 52 Volume Stop the alarm 59 Adjust 10, 49, 50 Stopwatch 61 Key 6 Strap 5 Streaming service 48 W Support xiii Wallpaper 32 Switch on and off 3 Web 58, 66–69 Switch PTT on and off 54 Wireless markup language 66 Synchronization 37 Wrist strap 5 Synchronize all 29 Write a message 17 Write and send a message 14 Write and send a multimedia message 15