BSW Is Your #1 Source for Sound Cards
Total Page:16
File Type:pdf, Size:1020Kb
Load more
Recommended publications
-
FW-1804 Firewire Audio-MIDI Interface
» D00846700A FW-1804 FireWire Audio-MIDI Interface SETUP GUIDE Contents Introduction ...............................2 About the FW-1804 .......................2 Monitor Mixing ...........................2 The IEEE 1394 Standard ...................2 Before Installing the Software ...............3 Installation (Windows 2000 and Windows XP) .....4 Installation (Mac OS X 10.2.8 and above).........6 Installation (Mac OS 9.2)......................7 Connections ...............................8 MIDI Connections ........................8 Analog Audio Connections .................8 Status Indicators .........................9 Clock Source Setting ......................9 Introduction About the FW-1804 • COMPUTER selects the signals from the DAW passed through the FireWire connection. The level of the signals from the computer is set using the master output control The FW-1804 provides your computer with high-quality of the DAW software and the two analog outputs may be audio facilities: eight channels of analog input and two of selected (using the software Control Panel) for output of output, with two channels of digital audio I/O through these signals. coaxial connections and eight channels of digital I/O through optical connections—at up to 96 kHz 24-bit. There • INPUTS selects the stereo mix of the analog, optical and are also two physical MIDI input and four physical output coaxial signals for monitoring. ports. • BOTH allows the computer signals to be monitored It is connected to the host computer using a single 6-pin to mixed with the input signals. 6-pin IEEE 1394 cable (supplied) that carries audio and Individual channels can be set to unity gain by pressing and MIDI information back and forth between the FW-1804 holding the computer's [Shift] key while clicking on the and the computer. -
PCI EXPRESS® CARD EDGE CONNECTORS Extend Differential Signaling to 8.0GB/S for New Generation Systems
BOARD/WIRE-TO-BOARD CONNECTORS PCI EXPRESS® CARD EDGE CONNECTORS Extend differential signaling to 8.0GB/S for new generation systems OVERVIEW These 1.0mm pitch, vertical card edge connectors from FCI enable all generations of PCI Express® signaling in desktop PCs, workstations, and servers. The connector designs provide support for 2.5Gb/s (Gen1), 5.0Gb/s (Gen2), and the recent update to 8.0Gb/s (Gen3) per differential signal pair. The base connector family provides x1, x4, x8, or x16 link widths to suit different bandwidth requirements. The basic bandwidth (x1) version supports a single PCI Express lane and is typically used for I/O cards in desktop PCs. The x4 and x8 connectors provide 64 and 98 contacts, respectively, for server I/O. The high bandwidth versions (x16 lanes and higher) are used for applications that require even more bandwidth, such as graphics cards in desktop PCs or riser cards in servers. FCI’s expansive range of available PCI Express card edge connectors includes options for through-hole solder, press-fit, surface-mount, or straddle-mount termination. FEATURES & BENEFITS TARGET MARKETS/APPLICATIONS • Base connector range offers 1, 4, 8, or 16 serial • Data PCI Express links for different bandwidth requirements • Desktop PCs • Options for through-hole solder, press-fit, • Servers surface-mount, or straddle-mount termination • Workstations • Press-fit version provides a solderless alternative for • Industrial termination to thick PCBs • SHB Express™ backplanes per PICMG 1.3 spec • Larger 200, 230 (x24), and 280-position -
Protect Yourself and Your Personal Information*
CYBER SAFETY Protect yourself and your personal information * Cybercrime is a growing and serious threat, making it essential that fraud prevention is part of our daily activities. Put these safeguards in place as soon as possible—if you haven’t already. Email Public Wi-Fi/hotspots Key Use separate email accounts: one each Minimize the use of unsecured, public networks CYBER SAFETY for work, personal use, user IDs, alerts Turn oF auto connect to non-preferred networks 10 notifications, other interests Tips Turn oF file sharing Choose a reputable email provider that oFers spam filtering and multi-factor authentication When public Wi-Fi cannot be avoided, use a 1 Create separate email accounts virtual private network (VPN) to help secure your for work, personal use, alert Use secure messaging tools when replying session to verified requests for financial or personal notifications and other interests information Disable ad hoc networking, which allows direct computer-to-computer transmissions Encrypt important files before emailing them 2 Be cautious of clicking on links or Never use public Wi-Fi to enter personal attachments sent to you in emails Do not open emails from unknown senders credentials on a website; hackers can capture Passwords your keystrokes 3 Use secure messaging tools when Create complex passwords that are at least 10 Home networks transmitting sensitive information characters; use a mix of numbers, upper- and Create one network for you, another for guests via email or text message lowercase letters and special characters and children -
United States Patent (19) 11 Patent Number: 6,157,976 Tien Et Al
USOO6157976A United States Patent (19) 11 Patent Number: 6,157,976 Tien et al. (45) Date of Patent: Dec. 5, 2000 54 PCI-PCI BRIDGE AND PCI-BUS AUDIO OTHER PUBLICATIONS ACCELERATOR INTEGRATED CIRCUIT PCI System Architecture, Tom Shanley/Don Anderson, 75 Inventors: Paul Tien, Fremont; Cheng-Yeuan 1995, pp. 381-382. Tsay, Pleasanton; Rsong-Hsiang Shiao, Fremont, all of Calif. Primary Examiner Ayaz R. Sheikh Assistant Examiner Rupal D. Dharia 73 Assignee: ESS Technology, Fremont, Calif. Attorney, Agent, or Firm-Gray Cary Ware & Freidenrich 57 ABSTRACT 21 Appl. No.: 09/074,657 A semiconductor device with an embedded PCI 2.1 com 22 Filed: May 6, 1998 pliant bridge provides expanded functionality as System 51511 Int. Cl. ............................. GO6F13FOO700; GO6F 13/38/ level implementationsp of a PCI-to-PCI bridge,9. and enhances 52 U.S. Cl. ............................ 710/129, 710/127, 710/64; the level of integration possible. The embedded PCI-to-PCI 345/435; 84/604; 84/621; 84/622; 84/647 bridge allows the creation of multi-function, multimedia 58) Field of Search 345/435: 710/127 add-on cards Supporting multiple devices. Multi-function, 710129,6484/602,604 621 622 647. multimedia Subsystems that provide audio, graphics, MPEG, s w is s s 454. 70425s etc., are mapped into a bridged-to PCI-bus that keeps Such s traffic off the main PCI-bus. The advantage for the system or 56) References Cited add-in card Vendor is that the various multimedia chips that are combined can come from different Sources, providing an U.S. PATENT DOCUMENTS optimized and highly customized combination of functions. -
2-Port USB 3.0 PCI Express Card USB Peripherals
Model 8402 2-Port USB 3.0 PCI Express Card USB Peripherals The USRobotics USB 3.0 PCI Express card easily adds 2 USB 3.0 ports to your computer. Connect super speed peripherals like USB 3.0 external hard drives, digital video cameras, high-resolution webcams and save time with faster transfer rates of up to 5 Gbps. The blazing fast 5 Gbps transfer rate is up to 10 times faster than USB 2.0 (480 Mbps). The USB 3.0 ports are backward compatible so while the card is capable of super speed transfers, it also supports USB 2.0 and USB 1.1 speeds. Simultaneous transfers automaticallly detect USB type and transfer data at the maximum rate for each individual port. Blazing Fast data transfer with USB 3.0 USB 3.0 - the new • Connect any USB 3.0 device to your computer • Compatible with USB 3.0 specifi cation standard • Backwards compatible with USB 2.0/1.1 devices Get the speed • Super Speed transfer rates up to 5 Gbps • Up to 10 times faster than USB 2.0 you need • Each port detects native USB speed and transfers data at the maximum rate for each port Powered USB Ports • Each port provides up to 900 mA of power when used with ATX power connector • Ideal for power hungry USB devices Easy Install • Plug & Play • Hot Swappable Applications • Add USB 3.0 connections to a desktop that may only have USB 2.0 or 1.1 • Expand USB connections by adding 2 additional USB ports • Connect additional peripherals such as external hard drives, printers, scanners, digital cameras, video cameras, video surveillance cameras, video display solutions, media devices, etc. -
Profire Lightbridge User Guide | 2 Introduction 1
34-in/36-out FireWire Lightpipe Interface User Guide English Table of Contents English . 2 Introduction . 2 What’s in the Box . 2 About ProFire Lightbridge . 3 ProFire Lightbridge Features . 4 System Requirements . 5 Controls and Connectors . 6 Front Panel . 6 Rear Panel . 7 Driver Installation . 8 Hardware Connections . 8 Audio . 8 MIDI . 9 Word Clock . 9 Using ProFire Lightbridge . 9 The Software Control Panel . 10 Hardware Page . 10 About Page . 13 Word Clock Synchronization . 14 Understanding Word Clock . 14 Specifications . 18 Warranty . 19 Warranty Terms . 19 Warranty Registration . 19 M-Audio ProFire Lightbridge User Guide | 2 Introduction 1 hank you for purchasing M-Audio’s ProFire Lightbridge interface. ProFire Lightbridge uses the ADAT optical T I/O standard to bring extensive digital connectivity to your studio. With its four ADAT optical inputs, four ADAT optical outputs, S/PDIF coaxial input and output, and stereo analog outputs, ProFire Lightbridge lets you connect a variety of devices to your FireWire-equipped digital audio workstation. Using the high-bandwidth, industry-standard FireWire (IEEE1394) protocol, ProFire Lightbridge gives your DAW up to 34 audio inputs and 36 outputs while connecting to your computer via a single cable. This makes it perfect for multi-channel transfers to and from external multitrack recorders. ProFire Lightbridge is also ideal for linking your DAW to an external digital mixer, or for connecting to another computer hosting soft synths and signal processors. This manual will explain the features and operation of ProFire Lightbridge. Even if you are an experienced recording enthusiast, please take a moment to read this guide and familiarize yourself with all of the unique features of your ProFire Lightbridge. -
Overview Guide SAP Mobile Cards for Ios Company
PUBLIC Document Version: 1.0 – 2020-01-28 Overview Guide SAP Mobile Cards for iOS company. All rights reserved. All rights company. affiliate THE BEST RUN 2020 SAP SE or an SAP SE or an SAP SAP 2020 © Content 1 Overview.................................................................. 3 2 Managing SAP Mobile Cards................................................... 4 3 SAP Mobile Cards User Guide...................................................5 Overview Guide SAP Mobile Cards for iOS 2 PUBLIC Content 1 Overview This guide provides an overview of SAP Mobile Cards: from setup and configuration by a system administrator to the end-user experience. Note SAP Mobile Cards is currently available only to iPhones running the latest two versions of iOS. SAP Mobile Cards lets system administrators mobilize SAP Fiori applications so that end users can share data from a desktop computer's SAP Fiori launchpad to an iPhone. This provides end users "any time from anywhere" access to the most up-to-date business data in an easily consumable mobile-friendly format. SAP Mobile Cards displays information in the form of cards that are grouped by card type and stored in a single card deck, with information available on both the front and the back of each card. Using the [[unresolved text-ref: cloud-admin-tooling-name]], system administrators can define and configure the SAP Mobile Cards application, including: ● Defining client-side security policies ● Creating cards using pre-defined or custom templates ● Specifying actions for new and updated cards such as "Allow" and "Reject", and an additional field for user input ● Configuring push and card-specific notifications End users download the SAP Mobile Cards application from the Apple App Store. -
Apple Business Manager Overview Overview
Getting Started Guide Apple Business Manager Overview Overview Contents Apple Business Manager is a web-based portal for IT administrators to deploy Overview iPhone, iPad, iPod touch, Apple TV, and Mac all from one place. Working Getting Started seamlessly with your mobile device management (MDM) solution, Apple Configuration Resources Business Manager makes it easy to automate device deployment, purchase apps and distribute content, and create Managed Apple IDs for employees. The Device Enrollment Program (DEP) and the Volume Purchase Program (VPP) are now completely integrated into Apple Business Manager, so organizations can bring together everything needed to deploy Apple devices. These programs will no longer be available starting December 1, 2019. Devices Apple Business Manager enables automated device enrollment, giving organizations a fast, streamlined way to deploy corporate-owned Apple devices and enroll in MDM without having to physically touch or prepare each device. • Simplify the setup process for users by streamlining steps in Setup Assistant, ensuring that employees receive the right configurations immediately upon activation. IT teams can now further customize this experience by providing consent text, corporate branding or modern authentication to employees. • Enable a higher level of control for corporate-owned devices by using supervision, which provides additional device management controls that are not available for other deployment models, including non-removable MDM. • More easily manage default MDM servers by setting a default server that’s based on device type. And you can now manually enroll iPhone, iPad, and Apple TV using Apple Configurator 2, regardless of how you acquired them. Content Apple Business Manager enables organizations to easily buy content in volume. -
M.2 Drive to U.2 (SFF-8639) Host Adapter for M.2 Pcie Nvme Ssds
M.2 Drive to U.2 (SFF-8639) Host Adapter for M.2 PCIe NVMe SSDs Product ID: U2M2E125 This PCI Express M.2 to U.2 adapter makes it easy to install an M.2 PCIe NVMe SSD into your desktop PC or server, and connect to the drive through an available U.2 (SFF-8639) compatible interface on your motherboard. Upgrade your system cost-effectively The M.2 to U.2 adapter is ideal for IT professionals, system integrators and installers, and enthusiasts who are building or upgrading a server or desktop computer. It supports one M.2 PCIe NVMe SSD (M- Key), providing a cost-effective way to add M.2 NVMe performance to your computer or server through an available U.2 (SFF-8639) compatible interface on your motherboard. Easy installation The M.2 to U.2 adapter works with all desktop PCs and servers that have an available drive bay or a U.2 (SFF-8639) compatible host interface. The adapter card is OS independent, so there are no drivers or software required for installation. www.startech.com/uk 0800 169 0408 The U2M2E125 is backed by a StarTech.com 2-year warranty and free lifetime technical support. www.startech.com/uk 0800 169 0408 Certifications, Reports Applications and Compatibility • Connect an M.2 NVMe SSD to your computer or server through an available U.2 (SFF-8639) slot to boost system speed and increase internal data storage • Ideal for IT professionals, system integrators and installers, and enthusiasts who are building or upgrading a computer or server solution • Get ultra-fast data access, ideal for high-performance workstations Features • -
Multimedia Systems DCAP303
Multimedia Systems DCAP303 MULTIMEDIA SYSTEMS Copyright © 2013 Rajneesh Agrawal All rights reserved Produced & Printed by EXCEL BOOKS PRIVATE LIMITED A-45, Naraina, Phase-I, New Delhi-110028 for Lovely Professional University Phagwara CONTENTS Unit 1: Multimedia 1 Unit 2: Text 15 Unit 3: Sound 38 Unit 4: Image 60 Unit 5: Video 102 Unit 6: Hardware 130 Unit 7: Multimedia Software Tools 165 Unit 8: Fundamental of Animations 178 Unit 9: Working with Animation 197 Unit 10: 3D Modelling and Animation Tools 213 Unit 11: Compression 233 Unit 12: Image Format 247 Unit 13: Multimedia Tools for WWW 266 Unit 14: Designing for World Wide Web 279 SYLLABUS Multimedia Systems Objectives: To impart the skills needed to develop multimedia applications. Students will learn: z how to combine different media on a web application, z various audio and video formats, z multimedia software tools that helps in developing multimedia application. Sr. No. Topics 1. Multimedia: Meaning and its usage, Stages of a Multimedia Project & Multimedia Skills required in a team 2. Text: Fonts & Faces, Using Text in Multimedia, Font Editing & Design Tools, Hypermedia & Hypertext. 3. Sound: Multimedia System Sounds, Digital Audio, MIDI Audio, Audio File Formats, MIDI vs Digital Audio, Audio CD Playback. Audio Recording. Voice Recognition & Response. 4. Images: Still Images – Bitmaps, Vector Drawing, 3D Drawing & rendering, Natural Light & Colors, Computerized Colors, Color Palletes, Image File Formats, Macintosh & Windows Formats, Cross – Platform format. 5. Animation: Principle of Animations. Animation Techniques, Animation File Formats. 6. Video: How Video Works, Broadcast Video Standards: NTSC, PAL, SECAM, ATSC DTV, Analog Video, Digital Video, Digital Video Standards – ATSC, DVB, ISDB, Video recording & Shooting Videos, Video Editing, Optimizing Video files for CD-ROM, Digital display standards. -
MAT 253 Operating Manual - Rev
MAT 253 OPERATING MANUAL Issue 04/2002 Ident. No. 114 9090 Thermo Finnigan MAT GmbH Postfach 1401 62 28088 Bremen Germany Reparatur-Begleitkarte*) Repair-Covering Letter Absender: Geräte-Type: Despachter: Instrument Type: __________________________________ _________________________________ __________________________________ Service-Nr.: Service No Sie erhalten zur Reparatur unter unserer Bestell-Nr.: You receive for repair under our order no.: Festgestellte Mängel oder deren Auswirkung: Established defect or its effect: Bitte detaillierte Angaben machen / Please specify in detail Ein Austauschteil haben wir erhalten unter Kommissions-Nr.: An exchange part already received with commission no.: Ja/Yes Nein/No Die Anlage ist außer Funktion The system is out of function Ja/Yes Nein/No Durch die nachfolgende Unterschrift By signing this document I am/ we are certifying bestätige(n) ich /wir, daß die o.g. Teile frei von that the a. m. parts are free from hazardous gesundheitsschädlichen Stoffen sind, bzw. vor materials. In case the parts have been used for ihrer Einsendung an Thermo Finnigan MAT the analysis of hazardous substances I/we dekontaminiert wurden, falls die Teile mit attest that the parts have been decontaminated giftigen Stoffen in Verbindung gekommen sind. before sending them to Thermo Finnigan MAT. __________________________________ _________________________________ Datum / date Unterschrift / signature *) Bitte vollständig ausfüllen / Please fill in completely MAT 253 O P E R A T I N G M A N U A L TABLE OF CONTENTS 1 GETTING -
Legal-Process Guidelines for Law Enforcement
Legal Process Guidelines Government & Law Enforcement within the United States These guidelines are provided for use by government and law enforcement agencies within the United States when seeking information from Apple Inc. (“Apple”) about customers of Apple’s devices, products and services. Apple will update these Guidelines as necessary. All other requests for information regarding Apple customers, including customer questions about information disclosure, should be directed to https://www.apple.com/privacy/contact/. These Guidelines do not apply to requests made by government and law enforcement agencies outside the United States to Apple’s relevant local entities. For government and law enforcement information requests, Apple complies with the laws pertaining to global entities that control our data and we provide details as legally required. For all requests from government and law enforcement agencies within the United States for content, with the exception of emergency circumstances (defined in the Electronic Communications Privacy Act 1986, as amended), Apple will only provide content in response to a search issued upon a showing of probable cause, or customer consent. All requests from government and law enforcement agencies outside of the United States for content, with the exception of emergency circumstances (defined below in Emergency Requests), must comply with applicable laws, including the United States Electronic Communications Privacy Act (ECPA). A request under a Mutual Legal Assistance Treaty or the Clarifying Lawful Overseas Use of Data Act (“CLOUD Act”) is in compliance with ECPA. Apple will provide customer content, as it exists in the customer’s account, only in response to such legally valid process.