Motorola and USB Tethering Instructions

Wi‐Fi Hotspot:

1. Go to Settings > More (in Wireless and networks) Tethering and Mobile Hotspot > Toggle Mobile hotspot switch on. 2. Just below the toggle you can configure the NETWORK NAME, PASSWORD and security type. 3. On the client device, use the Wi‐Fi network and password that was associated with the hotspot to connect.

USB Tethering:

Generally the best strategy is to use the device as an RNDIS network interface, rather than dialing out directly as a :

1. Prepare the client computer with the proper driver a. Windows Vista or later should work without additional b. Windows XP users may need to install ActiveSync 4.5 or later. They may need an Internet connection to do this. c. OS X users will need to download the HoRNDIS driver from http://joshuawise.com/horndis (3rd‐party website) d. Most Linux distributions will work without additional software 2. Connect the device to a computer via a USB cable 3. Wait for the client computer to recognize the device 4. On the device, go to Settings > More (in Wireless and networks) Tethering and Mobile Hotspot > Toggle USB tethering 5. Wait for the client computer to recognize the device as a new network connection a. Depending on your , you may or may not see anything happen. b. OS X users may see a message on the phone about Android File Transfer, which they can ignore The Internet should now be available on the client computer; turn Wi‐Fi off, open a web browser, and verify that you can view web pages