Ahnendorp B.A.S. Manufaktur für klassische Boxermotoren and Sets

Piston and Cylinder Set 94mm VW Wasserboxer WBX Engine 1,9 AA Performance / ArtNr.: 01912

Piston and cylinder set water cooled, complete set for one VW Wasserboxer engine. Including piston rings, piston pins and piston circlips.

Bore (mm): 94,0 (mm): 69 Engine size (ccm): 1910 Compression: 8,4:1 (also to use for serial 8,6:1)

Piston and Cylinder Set 94mm VW Wasserboxer WBX Engine 2,1 95PS / ArtNr.: 01914

Piston and cylinder set water cooled, complete set for one VW Wasserboxer engine. Including piston rings, piston pins and piston circlips.

Bore (mm): 94,0 Stroke (mm): 76,4 Engine size (ccm): 2100 Compression: 8,7:1

Piston and Cylinder Set Tuning 95,5mm VW Wasserboxer WBX Engine 2,1 to 2,2 112HP / ArtNr.: 01911

Piston and Cylinder Set Tuning 95,5mm VW Wasserboxer WBX Engine 2,1 112HP to 2,2 Piston and cylinder set water cooled, complete set for one VW Wasserboxer engine. Including piston rings, piston pins and piston circlips.

Bore (mm): 95,5 Stroke (mm): 76,4

Page 1/48 - Ahnendorp B.A.S. Michael Kiefer e.K. - Dreibömerweg 15 - 46419 Isselburg - Tel.:(0049) (0)2874/4047 Ahnendorp B.A.S. Manufaktur für klassische Boxermotoren Piston and Cylinder Set Tuning 95,5mm VW Wasserboxer WBX Engine 1,9 to 2,0 / ArtNr.: 01913

Piston and Cylinder Set Tuning 95,5mm VW Wasserboxer WBX Engine 1,9 to round 2,0 liter. Piston and cylinder set water cooled, complete set for one VW Wasserboxer engine. Including piston rings, piston pins and piston circlips.

Bore (mm): 95,5 Stroke (mm): 69

Piston and Cylinder Set 94mm VW Wasserboxer WBX Engine 2,1 95PS KS KOLBENSCHMIDT / ArtNr.: 01915

Piston and cylinder set water cooled, complete set for one VW Wasserboxer engine, best quality from KS KOLBENSCHMIDT. Including piston rings, piston pins and piston circlips.

Bore (mm): 94,0 Stroke (mm): 76,4 Engine size (ccm): 2100 Compression: 8,7:1

Piston and Cylinder Set 94mm VW Wasserboxer WBX Engine 2,1 112PS KS KOLBENSCHMIDT / ArtNr.: 01916

Piston and Cylinder Set 94mm VW Wasserboxer WBX Engine 2,1 112PS KS KOLBENSCHMIDT Piston and cylinder set water cooled, complete set for one VW Wasserboxer engine, best quality from KS KOLBENSCHMIDT. Including piston rings, piston pins and piston circlips.

Bore (mm): 94,0 Stroke (mm): 76,4 Engine size (ccm): 2100

Page 2/48 - Ahnendorp B.A.S. Michael Kiefer e.K. - Dreibömerweg 15 - 46419 Isselburg - Tel.:(0049) (0)2874/4047 Ahnendorp B.A.S. Manufaktur für klassische Boxermotoren Piston and Cylinder Set 94mm VW Wasserboxer WBX Engine 1,9 Mahle-KS 44-66kw / ArtNr.: 01912MK

Piston and cylinder set water cooled, complete set for one VW Wasserboxer engine. Including piston rings, piston pins and piston circlips. Best quality Mahle / KS . 44-66kw engines

Bore (mm): 94,0 Stroke (mm): 69 Engine size (ccm): 1910 Compression: 8,6:1

Piston ring sets

Piston ring sets for VW waterboxed WBX 1,9 / ArtNr.: 51912

Piston ring sets for VW waterboxed WBX 1,9. Bore (mm): 94,0 Stroke (mm): 69,0 Engine size (ccm): 1900, 8,6:1

Piston ring sets for VW waterboxed WBX / ArtNr.: 51188

We could deliver all piston ring sets for VW waterboxed WBX pistons. Please contact us that we can offer them. The dimensons and hight of the rings are needed!

Page 3/48 - Ahnendorp B.A.S. Michael Kiefer e.K. - Dreibömerweg 15 - 46419 Isselburg - Tel.:(0049) (0)2874/4047 Ahnendorp B.A.S. Manufaktur für klassische Boxermotoren Piston ring sets for VW waterboxed WBX 2,1 / ArtNr.: 51914

Piston ring sets for VW waterboxed WBX 2,1. Bore (mm): 94,0 Stroke (mm): 76,4 Engine size (ccm): 2100, 8,7:1 / 10,5:1

Case, , Rods

Crankshaft VW Wasserboxer 1,9 Exchange / ArtNr.: 03104

Crankshaft VW Wasserboxer engine 1,9, exchange part, regrind up to next undersize Stroke (mm): 69 Rod (mm): 55

Crankshaft VW Wasserboxer 2,1 Exchange / ArtNr.: 03105

Crankshaft VW Wasserboxer engine 2,1, exchange part, regrind up to next undersize Stroke (mm): 76,5 Rod (mm): 55

Rods VW Wasserboxer Engine 1,9-2,1 Exchange / ArtNr.: 07050

Rods for VW Wasserboxer engine 1,9-2,1, exchange parts, rebuild to standard diameter, set for one engine Please notice: we use your old bolds!

Page 4/48 - Ahnendorp B.A.S. Michael Kiefer e.K. - Dreibömerweg 15 - 46419 Isselburg - Tel.:(0049) (0)2874/4047 Ahnendorp B.A.S. Manufaktur für klassische Boxermotoren Lighten, weight correction and shotblasting of rods, set for one engine / ArtNr.: 80033

Lighten, weight correction and shotblasting of rods, set for one engine. Machining of your rods!

Gehäuseentlüftung VW Wasserboxer Motor T3 Bus deutsche Version Neuanfertigung 1,9 - 2,1 Liter / ArtNr.: 27079

Gehäuseentlüftung VW Wasserboxer Motor T3 Bus deutsche Version Neuanfertigung 1,9 - 2,1 Liter

Rods VW Wasserboxer Engine 1,9-2,1 new parts incl. bolds / ArtNr.: 07051

Rods VW Wasserboxer Engine 1,9-2,1 new parts incl. boldsr, set for one engine NOS VW parts

Bearing Sets

Mainbearing Standard / Standard until 08/1985 / ArtNr.: 05160

Mainbearing for VW Wasserboxer engine, set for one engine, until 08/1985 case: standard crank: standard

Please notice: Sample pictures - the bearings can be from different brands! We only deliver quality bearings which are also used for our complete engines. It is not possible with the order to select a special brand!

Page 5/48 - Ahnendorp B.A.S. Michael Kiefer e.K. - Dreibömerweg 15 - 46419 Isselburg - Tel.:(0049) (0)2874/4047 Ahnendorp B.A.S. Manufaktur für klassische Boxermotoren Mainbearing Standard / -0,25 until 08/1985 / ArtNr.: 05170

Mainbearing for VW Wasserboxer engine, set for one engine, until 08/1985 case: standard crank: -0,25

Please notice: Sample pictures - the bearings can be from different brands! We only deliver quality bearings which are also used for our complete engines. It is not possible with the order to select a special brand!

Mainbearing Standard / -0,50 up to 08/1985 / ArtNr.: 05181

Mainbearing for VW Wasserboxer engine, set for one engine, up to 08/1985 case: standard crank: -0,50

Please notice: Sample pictures - the bearings can be from different brands! We only deliver quality bearings which are also used for our complete engines. It is not possible with the order to select a special brand!

Mainbearing +0,50 / Standard until 08/1985 / ArtNr.: 05173

Mainbearing for VW Wasserboxer engine, set for one engine, until 08/1985 case: +0,50 crank: Standard

Please notice: Sample pictures - the bearings can be from different brands! We only deliver quality bearings which are also used for our complete engines. It is not possible with the order to select a special brand!

Page 6/48 - Ahnendorp B.A.S. Michael Kiefer e.K. - Dreibömerweg 15 - 46419 Isselburg - Tel.:(0049) (0)2874/4047 Ahnendorp B.A.S. Manufaktur für klassische Boxermotoren Mainbearing +0,50 / -0,25 until 08/1985 / ArtNr.: 05172

Mainbearing for VW Wasserboxer engine, set for one engine, until 08/1985 case: +0,50 crank: -0,25

Please notice: Sample pictures - the bearings can be from different brands! We only deliver quality bearings which are also used for our complete engines. It is not possible with the order to select a special brand!

Mainbearing +1,00 / -0,25 until 08/1985 / ArtNr.: 05176

Mainbearing for VW Wasserboxer engine, set for one engine, until 08/1985 case: +1,00 crank: -0,25

Please notice: Sample pictures - the bearings can be from different brands! We only deliver quality bearings which are also used for our complete engines. It is not possible with the order to select a special brand!

Mainbearing Standard / Standard up to 08/1985 / ArtNr.: 05161

Mainbearing for VW Wasserboxer engine, set for one engine, up to 08/1985 case: standard crank: standard

Please notice: Sample pictures - the bearings can be from different brands! We only deliver quality bearings which are also used for our complete engines. It is not possible with the order to select a special brand!

Page 7/48 - Ahnendorp B.A.S. Michael Kiefer e.K. - Dreibömerweg 15 - 46419 Isselburg - Tel.:(0049) (0)2874/4047 Ahnendorp B.A.S. Manufaktur für klassische Boxermotoren Mainbearing Standard / -0,25 up to 08/1985 / ArtNr.: 05171

Mainbearing for VW Wasserboxer engine, set for one engine, up to 08/1985 case: standard crank: -0,25

Please notice: Sample pictures - the bearings can be from different brands! We only deliver quality bearings which are also used for our complete engines. It is not possible with the order to select a special brand!

Mainbearing Standard / -0,50 until 08/1985 / ArtNr.: 05180

Mainbearing for VW Wasserboxer engine, set for one engine, until 08/1985 case: standard crank: -0,50

Please notice: Sample pictures - the bearings can be from different brands! We only deliver quality bearings which are also used for our complete engines. It is not possible with the order to select a special brand!

Mainbearing +0,50 / Standard up to 08/1985 / ArtNr.: 05174

Mainbearing for VW Wasserboxer engine, set for one engine, up to 08/1985 case: +0,50 crank: Standard

Please notice: Sample pictures - the bearings can be from different brands! We only deliver quality bearings which are also used for our complete engines. It is not possible with the order to select a special brand!

Page 8/48 - Ahnendorp B.A.S. Michael Kiefer e.K. - Dreibömerweg 15 - 46419 Isselburg - Tel.:(0049) (0)2874/4047 Ahnendorp B.A.S. Manufaktur für klassische Boxermotoren Mainbearing +0,50 / -0,25 up to 08/1985 / ArtNr.: 05175

Mainbearing for VW Wasserboxer engine, set for one engine, up to 08/1985 case: +0,50 crank: -0,25

Please notice: Sample pictures - the bearings can be from different brands! We only deliver quality bearings which are also used for our complete engines. It is not possible with the order to select a special brand!

Camshaft Bearing Set VW Wasserboxer Engine until 08/1985 / ArtNr.: 05145

Camshaft bearing set VW Wasserboxer engine standard, for one engine, until 08/1985

Please notice: Sample pictures - the bearings can be from different brands! We only deliver quality bearings which are also used for our complete engines. It is not possible with the order to select a special brand!

Camshaft Bearing Set VW Wasserboxer Engine up to 08/1985 / ArtNr.: 05146

Camshaft bearing set VW Wasserboxer engine standard, for one engine, up to 08/1985

Please notice: Sample pictures - the bearings can be from different brands! We only deliver quality bearings which are also used for our complete engines. It is not possible with the order to select a special brand!

Rod Bearing Set VW Wasserboxer Engine Standard / ArtNr.: 06015

Rod bearing set VW Wasserboxer engine, standard (55mm), set for one engine

Please notice: Sample pictures - the bearings can be from different brands! We only deliver quality bearings which are also used for our complete engines. It is not possible with the order to select a special brand!

Page 9/48 - Ahnendorp B.A.S. Michael Kiefer e.K. - Dreibömerweg 15 - 46419 Isselburg - Tel.:(0049) (0)2874/4047 Ahnendorp B.A.S. Manufaktur für klassische Boxermotoren Rod Bearing Set VW Wasserboxer Engine -0,25 / ArtNr.: 06025

Rod bearing set VW Wasserboxer engine, -0,25mm, set for one engine

Please notice: Sample pictures - the bearings can be from different brands! We only deliver quality bearings which are also used for our complete engines. It is not possible with the order to select a special brand!

Rod Bearing Set VW Wasserboxer Engine -0,50 / ArtNr.: 06035

Rod bearing set VW Wasserboxer engine, -0,50mm, set for one engine

Please notice: Sample pictures - the bearings can be from different brands! We only deliver quality bearings which are also used for our complete engines. It is not possible with the order to select a special brand!

Location Dowel Set / ArtNr.: 05053

Location dowel, set for one engine = 5 p/c

Mainbearing WBX waterboxer +0,50 / -0,25 up to 08/1985 Made in Germany / ArtNr.: 05175MK

Mainbearing WBX waterboxer +0,50 / -0,25 up to 08/1985 "Made in Germany", special made for us, very good quality. case: +0,50 crank: -0,25

Page 10/48 - Ahnendorp B.A.S. Michael Kiefer e.K. - Dreibömerweg 15 - 46419 Isselburg - Tel.:(0049) (0)2874/4047 Ahnendorp B.A.S. Manufaktur für klassische Boxermotoren Rod Bearing Set VW Wasserboxer Engine -0,75 / ArtNr.: 06036

Rod bearing set VW Wasserboxer engine, -0,75mm, set for one engine

Please notice: Sample pictures - the bearings can be from different brands! We only deliver quality bearings which are also used for our complete engines. It is not possible with the order to select a special brand!

Rod Bearing Set VW Wasserboxer Engine -1,00 / ArtNr.: 06035

Rod bearing set VW Wasserboxer engine, -1,00mm, set for one engine

Please notice: Sample pictures - the bearings can be from different brands! We only deliver quality bearings which are also used for our complete engines. It is not possible with the order to select a special brand!

Mainbearing WBX waterboxer +0,50 / Standard up to 08/1985 Made in Germany, on stock / ArtNr.: 05174MK

Mainbearing WBX waterboxer +0,50 / Standard up to 08/1985 "Made in Germany", special made for us, very good quality. case: +0,50 crank: Standard

Mainbearing WBX waterboxer +1,00 / -0,25 up to 08/1985 Made in Germany / ArtNr.: 05185MK

Mainbearing WBX waterboxer +1,00 / -0,25 up to 08/1985 "Made in Germany", special made for us, very good quality. case: +1,00 crank: -0,25

Gasket Sets

Page 11/48 - Ahnendorp B.A.S. Michael Kiefer e.K. - Dreibömerweg 15 - 46419 Isselburg - Tel.:(0049) (0)2874/4047 Ahnendorp B.A.S. Manufaktur für klassische Boxermotoren Engine Gasket Set VW Wasserboxer / ArtNr.: 10027

Engine gasket set VW Wasserboxer, full gasket set for one engine No Reinz!

Cylinder Head Gasket Set VW Wasserboxer / ArtNr.: 10055

Cylinder head gasket set VW Wasserboxer, full gasket set for one head

Reinzoplast Sealing Gasket / ArtNr.: 08094

Reinzoplast sealing gasket, not harding sealing for temperatures from -50 to +250°C

Pulley Seal Wasserboxer / ArtNr.: 10009

Pulley seal (small)

Valve Cover Gasket Set REINZ OE / ArtNr.: 10012

Valve cover gasket set REINZ OE (10 gaskets)

Page 12/48 - Ahnendorp B.A.S. Michael Kiefer e.K. - Dreibömerweg 15 - 46419 Isselburg - Tel.:(0049) (0)2874/4047 Ahnendorp B.A.S. Manufaktur für klassische Boxermotoren Pushrod Tubes Seals Wasserboxer / ArtNr.: 10049

Pushrod tubes seals Wasserboxer , 16 pieces

Flywheel Seal Wasserboxer / ArtNr.: 10024

Flywheel seal (Big)

Engine Gasket Set VW Wasserboxer Reinz / ArtNr.: 10027R

Engine gasket set VW Wasserboxer, full gasket set for one engine, Reinz

Heads and Supplies

Cylinder Heads VW Wasserboxer 1,9 Set / ArtNr.: 30031

Cylinder heads VW Wasserboxer 1,9 60PS, set for one engine (2 heads), including valves, springs and supplies, new parts

Cylinder Heads VW Wasserboxer 2,1 Set / ArtNr.: 30032

Cylinder heads VW Wasserboxer 1,9 90-112PS, set for one engine (2 heads), including valves, springs and supplies, new parts

Page 13/48 - Ahnendorp B.A.S. Michael Kiefer e.K. - Dreibömerweg 15 - 46419 Isselburg - Tel.:(0049) (0)2874/4047 Ahnendorp B.A.S. Manufaktur für klassische Boxermotoren Spark Plug NGK long thread / ArtNr.: 26025L

Spark plug NGK long thread, one piece

Cylinder Head Rebuild Standard VW Wasserboxer, Set / ArtNr.: 80208

Regrind heads, resurface grind seats, cut valve seats , rebuild valves, new valve guides, price for two heads. Attention: All parts must deliver disassembled and cleaned. Otherwise we can not machine your parts or only for additional cost.

Cylinder Head Rebuild Tuning 1 VW Wasserboxer, Set / ArtNr.: 80258

Regrind heads, cut valve seats, new valve guides, porting heads and manifolds, new standard valves, price for two heads

Cylinder Head Rebuild Tuning 2 VW Wasserboxer, Set / ArtNr.: 80288

Regrind heads, new bigger valve seats, new valve guides, porting heads and manifolds, new standard valves, price for two heads

Valve Cover Set Alu VW Wasserboxer / ArtNr.: 29050A

Valve cover set Alu VW Wasserboxer, set for one engine, including gaskets and mounting kit

Page 14/48 - Ahnendorp B.A.S. Michael Kiefer e.K. - Dreibömerweg 15 - 46419 Isselburg - Tel.:(0049) (0)2874/4047 Ahnendorp B.A.S. Manufaktur für klassische Boxermotoren Valve Cover Set Alu HD VW Wasserboxer / ArtNr.: 29050

Valve cover set Alu HD VW Wasserboxer, set for one engine, including gaskets and mounting kit. Gasket is centered in the valve cover by groove. Symbol picture, also new Empi version possible!

Intake Valves VW Wasserboxer 39,9mm /8mm / ArtNr.: 09322

Intake valves VW Wasserboxer 39,9mm /8mm, set for one engine

Intake Valves VW Wasserboxer 35,5mm /8mm / ArtNr.: 09321

Intake valves VW Wasserboxer 35,5mm /8mm, set for one engine

Intake Valves VW Wasserboxer 44mm Tuning / ArtNr.: 09320

Intake valves VW Wasserboxer 44mm Tuning, set for one engine

Exhaust Valves VW Wasserboxer 33,9mm /9mm / ArtNr.: 09332

Exhaust valves VW Wasserboxer 33,9mm /9mm, set for one engine

Page 15/48 - Ahnendorp B.A.S. Michael Kiefer e.K. - Dreibömerweg 15 - 46419 Isselburg - Tel.:(0049) (0)2874/4047 Ahnendorp B.A.S. Manufaktur für klassische Boxermotoren Exhaust Valves VW Wasserboxer 29,9mm /9mm / ArtNr.: 09331

Exhaust valves VW Wasserboxer 29,9mm /9mm, set for one engine

Exhaust Valves VW Wasserboxer 36mm Tuning / ArtNr.: 09330

Exhaust valves VW Wasserboxer 36mm Tuning, set for one engine

Valve Double Springs HD VW Wasserboxer, Set / ArtNr.: 04561

Valve double springs HD VW Wasserboxer, set for one engine, heads must be modified

Spring Cup Set VW Wasserboxer Chromo HD / ArtNr.: 04630

Spring cup set VW Wasserboxer chromo HD, to use with double springs, too

Spring Cup Set VW Wasserboxer Titan / ArtNr.: 04632

Spring cup set VW Wasserboxer Titan, to use with double springs, too

Page 16/48 - Ahnendorp B.A.S. Michael Kiefer e.K. - Dreibömerweg 15 - 46419 Isselburg - Tel.:(0049) (0)2874/4047 Ahnendorp B.A.S. Manufaktur für klassische Boxermotoren Valve Adjustig Screws M8 HD US / ArtNr.: 04751

Valve adjustig screws M8 HD, set for one engine

Valve Adjustig Screws M8 HD German / ArtNr.: 04750

Valve adjustig screws M8 HD german, set for one engine

Nuts for Valve Adjusting Screws M8 / ArtNr.: 04754

Nuts for valve adjusting screws M8

Pushrod Tubes VW Wasserboxer Standard / ArtNr.: 10048

Pushrod tubes standard VW Wasserboxer, set for one engine

Camshafts and Supplies

Page 17/48 - Ahnendorp B.A.S. Michael Kiefer e.K. - Dreibömerweg 15 - 46419 Isselburg - Tel.:(0049) (0)2874/4047 Ahnendorp B.A.S. Manufaktur für klassische Boxermotoren Schleicher Camshaft VW Wasserboxer 292° / ArtNr.: 04013

Schleicher camshaft VW Wasserboxer 292°, lift 8,5mm. Also to use standard engines and hydraulic cam followers.

Schleicher Camshaft VW Wasserboxer 296° / ArtNr.: 04020

Schleicher camshaft VW Wasserboxer 296°, lift 9,0mm. For use with mechanical cam followers.

Schleicher Camshaft VW Wasserboxer 308° / ArtNr.: 04010

Schleicher camshaft VW Wasserboxer 308°, lift 8,45mm. For use with mechanical cam followers.

Schleicher Camshaft VW Wasserboxer 316° / ArtNr.: 04030

Schleicher camshaft VW Wasserboxer 316°, lift 8,5mm. For use with mechanical cam followers.

Schleicher Camshaft VW Wasserboxer 324° / ArtNr.: 04040

Schleicher camshaft VW Wasserboxer 324°, lift 9,4mm. For use with mechanical cam followers.

Page 18/48 - Ahnendorp B.A.S. Michael Kiefer e.K. - Dreibömerweg 15 - 46419 Isselburg - Tel.:(0049) (0)2874/4047 Ahnendorp B.A.S. Manufaktur für klassische Boxermotoren Cam Follower Special Wasserboxer / ArtNr.: 04712

Cam Follower Special Wasserboxer, for use with machined cases for bushed cam followers, set for one engine. SYMBOLBILD - SEHEN AUS WIE TYP 1!!!

Cam Follower Hydraulic Wasserboxer also to use with Schleicher hydraulic cams / ArtNr.: 04735

Cam Follower Hydraulic Wasserboxer, set for one engine

Cam Follower Hydraulic Wasserboxer best german quality / ArtNr.: 04735HQ

Cam Follower Hydraulic Wasserboxer best german quality, set for one engine

Oil Pumps and Supplies

HD Oilpump like Melling 32mm VW Wasserboxer / ArtNr.: 16120

HD Oilpump like Melling 32mm VW Wasserboxer, with cover

HD Oilpump Schadeck 30mm VW Wasserboxer / ArtNr.: 16124

HD Oilpump Schadeck 30mm VW Wasserboxer, without cover

Page 19/48 - Ahnendorp B.A.S. Michael Kiefer e.K. - Dreibömerweg 15 - 46419 Isselburg - Tel.:(0049) (0)2874/4047 Ahnendorp B.A.S. Manufaktur für klassische Boxermotoren Alu Oilpump Cover Schadeck VW Wasserboxer / ArtNr.: 16128

Alu oilpump cover Schadeck, for Schadeck and other oil pumps.

Oil Filter Wasserboxer WBX / ArtNr.: 16173

Oil Filter Wasserboxer WBX

Front oil cooler set VW waterboxed wbx / ArtNr.: 15100

Here we offer different front oil cooler sets with all parts which needed. Just change the cooler if possible and add the other parts to fit on the engine side. On the picture you see all the parts which are included. The correct partnumber will be change from our system with the order!

Mounting for oilcooler universal / ArtNr.: 15300

Mounting for oilcooler universal, one p/c. 140x20 / 140x40mm.

Engine Alu Breatherbox Ahnendorp B.A.S. / ArtNr.: 27082

Engine Alu Breatherbox Ahnendorp B.A.S.

Page 20/48 - Ahnendorp B.A.S. Michael Kiefer e.K. - Dreibömerweg 15 - 46419 Isselburg - Tel.:(0049) (0)2874/4047 Ahnendorp B.A.S. Manufaktur für klassische Boxermotoren HD Oilpump original Melling 30mm VW Wasserboxer / ArtNr.: 16120M

HD Oilpump original Melling 30mm VW Wasserboxer, with cover

Flywheels

Flywheel VW Wasserboxer 215mm NEW / ArtNr.: 23029

New flywheel VW Wasserboxer 215mm, lightend and balanced, weight ca. 5,4 kg.

Flywheel VW Wasserboxer 215mm Exchange / ArtNr.: 23030

Flywheel VW Wasserboxer 215mm exchange part balanced Machining your flywheel, like exchange.

Flywheel VW Wasserboxer 228mm Exchange / ArtNr.: 23032

Flywheel VW Wasserboxer 228mm exchange part balanced

Page 21/48 - Ahnendorp B.A.S. Michael Kiefer e.K. - Dreibömerweg 15 - 46419 Isselburg - Tel.:(0049) (0)2874/4047 Ahnendorp B.A.S. Manufaktur für klassische Boxermotoren Flywheel Shim Set Wasserboxer / ArtNr.: 23036

Flywheel Shim Set 1x 0,30 mm 2x 0,32 mm 1x 0,36 mm 2x 0,38 mm

Needle Bearing for flywheel Wasserboxer / ArtNr.: 23075

Needle Bearing for flywheel Wasserboxer

B.A.S. Special Flywheel Bolds VW Wasserboxer / ArtNr.: 23070

B.A.S. special flywheel bolds VW Wasserboxer, 12 K quality, 13,1 mm, flywheel must be machined.

Flywheel VW Wasserboxer 228mm new german part / ArtNr.: 23033

Flywheel VW Wasserboxer 228mm new german part, lightend and balanced, weight ca. 6 kg.

Flywheel bolts (5 pieces) WBX original / ArtNr.: 23071

Flywheel bolts (5 pieces) WBX original

Page 22/48 - Ahnendorp B.A.S. Michael Kiefer e.K. - Dreibömerweg 15 - 46419 Isselburg - Tel.:(0049) (0)2874/4047 Ahnendorp B.A.S. Manufaktur für klassische Boxermotoren Flywheel bolt lock washer WBX / ArtNr.: 23073

Flywheel bolt lock washer WBX

Pilot shaft bearing felt ring WBX / ArtNr.: 23074

Pilot shaft bearing felt ring WBX

Carburettors, Manifolds, Supplies

For use a Wasserboxer WBX engine in a VW Beetle or vagon, Bus, Transporter. All carburettors are original Weber with serial number, high quality versions. To use the systems in a vagon, Bus, Transporter, the manifolds must be cutted, perhaps.

Carburettor Set Weber 40 IDF VW Wasserboxer 1,9 with K&N airfilters / ArtNr.: 32191

Carburettor set Weber 40 IDF, set to fit on one engine, including air filters, gaskets and manifolds*. Without air horns!

Carburettor Set Weber 44 IDF VW Wasserboxer 2,1 with K&N airfilters / ArtNr.: 32201

Carburettor set Weber 44 IDF, set to fit on one engine, including air K&N filters, gaskets and manifolds*.

Page 23/48 - Ahnendorp B.A.S. Michael Kiefer e.K. - Dreibömerweg 15 - 46419 Isselburg - Tel.:(0049) (0)2874/4047 Ahnendorp B.A.S. Manufaktur für klassische Boxermotoren Manifolds VW Wasserboxer Weber IDF 40 short version / ArtNr.: 28035

Manifolds VW Wasserboxer Weber IDF 40, set for one engine, including mounting set. For all engines up to 85 PS (1,9-2,1), the manifolds must be welded for bigger diameter, see machining 80041.

Carburettor Gasket Set Weber IDF 40 / ArtNr.: 32325

Manifold gasket for one Weber IDF 40 carburettor, 2 pieces

Carburettor Gasket Set Weber IDF 44 / ArtNr.: 32326

Manifold gasket for one Weber IDF 44 carburettor, 2 pieces

B.A.S. Linkage for VW Wasserboxer engine / ArtNr.: 34010

B.A.S. Linkage for VW Wasserboxer engine, each carburettor could be adjust seperate

Pierburg Fuel Pump Electric 12V / ArtNr.: 28057

Pierburg fuel pump, 0,3-0,4 Bar

Page 24/48 - Ahnendorp B.A.S. Michael Kiefer e.K. - Dreibömerweg 15 - 46419 Isselburg - Tel.:(0049) (0)2874/4047 Ahnendorp B.A.S. Manufaktur für klassische Boxermotoren Synchron Tester / ArtNr.: 28062

Synchron tester to calibrate the carburettors

Manifolds VW Wasserboxer Weber IDF 44 short version / ArtNr.: 28036

Manifolds VW Wasserboxer Weber IDF 44, set for one engine, including mounting set. For all engines up to 85 PS (1,9-2,1), the manifolds must be welded for bigger diameter, see machining 80041.

Machining Wasserboxer Manifolds for bigger diameter / ArtNr.: 80041

Machining Wasserboxer manifolds for bigger diameter, to use manifolds for engines up to 85PS (1,9-2,1).

Fuel Stop Relay / ArtNr.: 28058

Fuel Stop Relay

K+N Air Filter Cleaner / ArtNr.: 27100

K+N Air Filter Cleaner

Page 25/48 - Ahnendorp B.A.S. Michael Kiefer e.K. - Dreibömerweg 15 - 46419 Isselburg - Tel.:(0049) (0)2874/4047 Ahnendorp B.A.S. Manufaktur für klassische Boxermotoren K+N Air Filter Oil / ArtNr.: 27090

K+N Air Filter Oil

Re-adjust new carburettor set for you engine / ArtNr.: 81390

Re-adjust new carburettor set from us for you . Please state all your engine details! Price for a set ( 2 carburettors).

Engine Alu Breatherbox Ahnendorp B.A.S. / ArtNr.: 27082

Engine Alu Breatherbox Ahnendorp B.A.S.

Carburettor Set Weber 40 IDF VW Wasserboxer 1,9 / ArtNr.: 32191BF

Carburettor set Weber 40 IDF, set to fit on one engine, including air filters, gaskets and manifolds*. Without air horns!

Carburettor Set Weber 44 IDF VW Wasserboxer 2,1 / ArtNr.: 32201BF

Carburettor set Weber 44 IDF, set to fit on one engine, including air filters, gaskets and manifolds*.

Electric Page/ Ignition 26/48 - Ahnendorp B.A.S. Michael Kiefer e.K. - Dreibömerweg 15 - 46419 Isselburg - Tel.:(0049) (0)2874/4047 Ahnendorp B.A.S. Manufaktur für klassische Boxermotoren

Ignition Distributor 009 / ArtNr.: 26010

Ignition Distributor 009

Ignition Distributor 009 Chrome / ArtNr.: 26013

Ignition Distributor 009 Chrome

Ignition Coil Bosch Blue new style / ArtNr.: 26104

Ignition coil Porsche 356 Bosch original "blue" version, other colored to match engine finish, 12 Volt new style

Pierburg Fuel Pump Electrical / ArtNr.: 28057

Pierburg fuel pump, 0,3-0,4 Bar

Fuel Stop Relay / ArtNr.: 28058

Fuel Stop Relay

Page 27/48 - Ahnendorp B.A.S. Michael Kiefer e.K. - Dreibömerweg 15 - 46419 Isselburg - Tel.:(0049) (0)2874/4047 Ahnendorp B.A.S. Manufaktur für klassische Boxermotoren Distributor Cap / ArtNr.: 26118

Distributor Cap

Rotor Ignition Distributor / ArtNr.: 26100

Rotor Ignition Distributor

Ignition Points / ArtNr.: 26101

Ignition Points

Page 28/48 - Ahnendorp B.A.S. Michael Kiefer e.K. - Dreibömerweg 15 - 46419 Isselburg - Tel.:(0049) (0)2874/4047 Ahnendorp B.A.S. Manufaktur für klassische Boxermotoren 1-2-3 Ignition distributor without vacuum connection for WBX incl. spacer / ArtNr.: 26020

The 1-2-3 ignition distributor is created in cooperation with VW-professionals, this has resulted in a product that can be used in all type '1', '2' and '3' cars. Version without vacuum-advance.

Other systems of electronic ignition (Lumenition, Newtronic & Multic etc) require that the original mechanical centrifugal advance system is still fitted, points – assisted systems (Boyer – Bransden etc.) even use the original points operating cam which suffers uneven wear and consequent lumpy running of the engine because each cylinder has its own inaccurate ignition timing. Furthermore they all require a separate box for the associated electronics. ’123ignition’ is different, all is contained in one simple module which just goes in place of the original points box, the points operating cam is removed along with the advance weights and their bearings which wear, two strong, small magnets slip onto the drive pins which previously held the advance weights, ‘123ignition’ is then simply bolted on.

Simple installation without mechanical adaptations. Smoother engine torque curve. No maintenance – ever again! Variable dwell angle to prevent low speed overheating of ignition coil and make a better spark at all speeds. Better starting. Better emissions. Better fuel consumption. No burning out of the ignition coil (after stopping the engine power is cut to the coil after 1 second!). Built in LED for simple static ignition timing. Real value for money.

SPECIFICATIONS direct. : CW (topview) voltage : 4,0-15,0 Volts range : 500 - 7000 rpm temperature : -30 to 85 Celsius coil : stock or High Energy coil primary coil NOT below 1,0 ohm dwell : constant current, fully autom. time-out : after 1 second current is switched off spark-bal. : better than 0,5 degr. crankshaft vacuum : advance starts at 5 inchHg stops at 10 degr. @ 10 inchHg gearshift retard > 17 inchHg max.advance : 45 degr. crankshaft wiring : red = +6V or +12V, black = '-' coil

Page 29/48 - Ahnendorp B.A.S. Michael Kiefer e.K. - Dreibömerweg 15 - 46419 Isselburg - Tel.:(0049) (0)2874/4047 Ahnendorp B.A.S. Manufaktur für klassische Boxermotoren 1-2-3 Ignition distributor with vacuum connection for VW WBX incl. spacer / ArtNr.: 26021

The 1-2-3 ignition distributor is created in cooperation with VW-professionals, this has resulted in a product that can be used in all type '1', '2' and '3' cars. Version with vacuum-advance.

Other systems of electronic ignition (Lumenition, Newtronic & Multic etc) require that the original mechanical centrifugal advance system is still fitted, points – assisted systems (Boyer – Bransden etc.) even use the original points operating cam which suffers uneven wear and consequent lumpy running of the engine because each cylinder has its own inaccurate ignition timing. Furthermore they all require a separate box for the associated electronics. ’123ignition’ is different, all is contained in one simple module which just goes in place of the original points box, the points operating cam is removed along with the advance weights and their bearings which wear, two strong, small magnets slip onto the drive pins which previously held the advance weights, ‘123ignition’ is then simply bolted on.

Simple installation without mechanical adaptations. Smoother engine torque curve. No maintenance – ever again! Variable dwell angle to prevent low speed overheating of ignition coil and make a better spark at all speeds. Better starting. Better emissions. Better fuel consumption. No burning out of the ignition coil (after stopping the engine power is cut to the coil after 1 second!). Built in LED for simple static ignition timing. Real value for money.

SPECIFICATIONS direct. : CW (topview) voltage : 4,0-15,0 Volts range : 500 - 7000 rpm temperature : -30 to 85 Celsius coil : stock or High Energy coil primary coil NOT below 1,0 ohm dwell : constant current, fully autom. time-out : after 1 second current is switched off spark-bal. : better than 0,5 degr. crankshaft vacuum : advance starts at 5 inchHg stops at 10 degr. @ 10 inchHg gearshift retard > 17 inchHg max.advance : 45 degr. crankshaft wiring : red = +6V or +12V, black = '-' coil

Page 30/48 - Ahnendorp B.A.S. Michael Kiefer e.K. - Dreibömerweg 15 - 46419 Isselburg - Tel.:(0049) (0)2874/4047 Ahnendorp B.A.S. Manufaktur für klassische Boxermotoren 1-2-3 Ignition USB distributor with vacuum connection for VW WBX watercooled incl. spacer / ArtNr.: 26022

The 1-2-3 ignition distributor is created in cooperation with VW-professionals, this has resulted in a product that can be used in all type '1', '2' and '3' cars. Version with vacuum-advance and USB, FREE ADJUSTABLE.

123ignition has become a reputable brand-name in the world of ignition systems for classic cars. The units are disigned with respect for the originality of the classic vehicle. While the outside still looks like an original distributor, the inside hides a lot of 'high-tech', that performs it's task without any wear. - Standard ignition units are available per car-brand, with all the popular advance-curves pre-programmed - Programmable ignition units are available for those wanting to tune their engines.

Other systems of electronic ignition (Lumenition, Newtronic & Multic etc) require that the original mechanical centrifugal advance system is still fitted, points – assisted systems (Boyer – Bransden etc.) even use the original points operating cam which suffers uneven wear and consequent lumpy running of the engine because each cylinder has its own inaccurate ignition timing. Furthermore they all require a separate box for the associated electronics. ’123ignition’ is different, all is contained in one simple module which just goes in place of the original points box, the points operating cam is removed along with the advance weights and their bearings which wear, two strong, small magnets slip onto the drive pins which previously held the advance weights, ‘123ignition’ is then simply bolted on.

Simple installation without mechanical adaptations. Smoother engine torque curve. No maintenance – ever again! Variable dwell angle to prevent low speed overheating of ignition coil and make a better spark at all speeds. Better starting. Better emissions. Better fuel consumption. No burning out of the ignition coil (after stopping the engine power is cut to the coil after 1 second!). Built in LED for simple static ignition timing. Real value for money.

SPECIFICATIONS direct. : CW (topview) voltage : 4,0-15,0 Volts range : 500 - 7000 rpm temperature : -30 to 85 Celsius coil : stock or High Energy coil primary coil NOT below 1,0 ohm dwell : constant current, fully autom. time-out : after 1 second current is switched off spark-bal. : better than 0,5 degr. crankshaft vacuum : advance starts at 5 inchHg stops at 10 degr. @ 10 inchHg gearshift retard > 17 inchHg max.advance : 45 degr. crankshaft wiring : red = +6V or +12V, black = '-' coil

Ignition Coil Bosch / Beru Blue 12V Retro Style VW WBX / ArtNr.: 26102

Ignition coil Bosch or Beru original "blue" version, 12 Volt retro style. We deliver Bosch or Beru (like stock status), not possible to select one special type!

Page 31/48 - Ahnendorp B.A.S. Michael Kiefer e.K. - Dreibömerweg 15 - 46419 Isselburg - Tel.:(0049) (0)2874/4047 Ahnendorp B.A.S. Manufaktur für klassische Boxermotoren Ignition Coil like 456 12V / ArtNr.: 26106

Ignition coil like 456 version 12 Volt, also to use with 123 ignition!

Kabelstecker Steckzunge Doppelstecker für Zündspule / ArtNr.: 26111

Kabelstecker Steckzunge Doppelstecker für Zündspule. Passend für Flachstecker 6,4mm. Lieferung pro Stück.

Page 32/48 - Ahnendorp B.A.S. Michael Kiefer e.K. - Dreibömerweg 15 - 46419 Isselburg - Tel.:(0049) (0)2874/4047 Ahnendorp B.A.S. Manufaktur für klassische Boxermotoren 1-2-3 Ignition distributor with vacuum con. for VW Waterboxer WBX incl. spacer / ArtNr.: 26024

The 1-2-3 injection ignition distributor is created in cooperation with VW-professionals, this has resulted in a product that can be used in all type '1', '2' and '3' cars.

123ignition has become a reputable brand-name in the world of ignition systems for classic cars. The units are disigned with respect for the originality of the classic vehicle. While the outside still looks like an original distributor, the inside hides a lot of 'high-tech', that performs it's task without any wear. - Standard ignition units are available per car-brand, with all the popular advance-curves pre-programmed - Programmable ignition units are available for those wanting to tune their engines.

Other systems of electronic ignition (Lumenition, Newtronic & Multic etc) require that the original mechanical centrifugal advance system is still fitted, points – assisted systems (Boyer – Bransden etc.) even use the original points operating cam which suffers uneven wear and consequent lumpy running of the engine because each cylinder has its own inaccurate ignition timing. Furthermore they all require a separate box for the associated electronics. ’123ignition’ is different, all is contained in one simple module which just goes in place of the original points box, the points operating cam is removed along with the advance weights and their bearings which wear, two strong, small magnets slip onto the drive pins which previously held the advance weights, ‘123ignition’ is then simply bolted on.

Simple installation without mechanical adaptations. Smoother engine torque curve. No maintenance – ever again! Variable dwell angle to prevent low speed overheating of ignition coil and make a better spark at all speeds. Better starting. Better emissions. Better fuel consumption. No burning out of the ignition coil (after stopping the engine power is cut to the coil after 1 second!). Built in LED for simple static ignition timing. Real value for money.

SPECIFICATIONS direct. : CW (topview) voltage : 4,0-15,0 Volts range : 500 - 7000 rpm temperature : -30 to 85 Celsius coil : stock or High Energy coil primary coil NOT below 1,0 ohm dwell : constant current, fully autom. time-out : after 1 second current is switched off spark-bal. : better than 0,5 degr. crankshaft vacuum : advance starts at 5 inchHg stops at 10 degr. @ 10 inchHg gearshift retard > 17 inchHg max.advance : 45 degr. crankshaft wiring : red = +6V or +12V, black = '-' coil

BAS Ignition distributor universal for injection / ArtNr.: 26031

BAS Ignition distributor universal for injection Der Verteiler liefert per optischer Messung die Signale an das Einspritzanlagen Steuergerät, Signal 5 Volt. Gehäuse wird je nach verfügbarkeit glänzend oder matt geliefert. Einteilung 60/2.

Page 33/48 - Ahnendorp B.A.S. Michael Kiefer e.K. - Dreibömerweg 15 - 46419 Isselburg - Tel.:(0049) (0)2874/4047 Ahnendorp B.A.S. Manufaktur für klassische Boxermotoren Ignition Distributor WBX waterboxer 2,1 / ArtNr.: 26014

Ignition Distributor WBX waterboxer

Clutch and Supplies

Clutch Disc Standard 215mm / ArtNr.: 24130

Clutch disc standard 215mm

Clutch Disc Sachs Performance Racing 215mm / ArtNr.: 24140

Clutch disc Sachs Performance Racing 215mm

Clutch Disc Sachs Sintered Metal 228mm / ArtNr.: 24151

Clutch disc Sachs sintered metal 228mm

Pressure Plate without ring Sachs HD 215mm / ArtNr.: 24050

Pressure plate without ring Sachs HD 215mm, for gearbox up to 08/1970

Page 34/48 - Ahnendorp B.A.S. Michael Kiefer e.K. - Dreibömerweg 15 - 46419 Isselburg - Tel.:(0049) (0)2874/4047 Ahnendorp B.A.S. Manufaktur für klassische Boxermotoren Thrust Bearing up to 08/1970 / ArtNr.: 24410

Thrust Bearing up to 08/1970

Thrust Bearing until 08/1970 / ArtNr.: 24400

Thrust Bearing until 08/1970

Clutch Disc Standard 228mm / ArtNr.: 24131

Clutch disc standard 228mm

Clutch Disc Sachs Performance Racing 228mm / ArtNr.: 24141

Clutch disc Sachs Performance Racing 228mm

Clutch Disc Sachs Sintered Metal 215mm / ArtNr.: 24150

Clutch disc Sachs sintered metal 215mm

Page 35/48 - Ahnendorp B.A.S. Michael Kiefer e.K. - Dreibömerweg 15 - 46419 Isselburg - Tel.:(0049) (0)2874/4047 Ahnendorp B.A.S. Manufaktur für klassische Boxermotoren Pressure Plate without ring Sachs HD 228mm / ArtNr.: 24057

Pressure plate without ring Sachs HD 228mm, for gearbox up to 08/1970

Pressure Plate without ring Standard 228mm / ArtNr.: 24056

Pressure plate without ring standard 228mm, for gearbox up to 08/1970

Pressure Plate without ring Sachs HD 215mm /2,0 / ArtNr.: 24060

Pressure plate without ring Sachs HD 215mm, Porsche 914/2,0 for gearbox

Pressure Plate without ring Standard 215mm / ArtNr.: 24030

Pressure plate without ring standard 215mm, for gearbox up to 08/1970

Exhaust

Streetsport Exhaust VW Beetle Steel VW Beetle Wasserboxer / ArtNr.: 21134

Tube inside diameter 35-41mm, slips over the original heaterboxes, up to round 160HP. Steel tubes and aluminum coated silencers. With modification usable for wasserboxer engine in beetle.

Page 36/48 - Ahnendorp B.A.S. Michael Kiefer e.K. - Dreibömerweg 15 - 46419 Isselburg - Tel.:(0049) (0)2874/4047 Ahnendorp B.A.S. Manufaktur für klassische Boxermotoren Streetsport Exhaust VW Beetle Stainless Steel Wasserboxer / ArtNr.: 21137

Tube inside diameter 35-41mm, slips over the original heaterboxes, up to round 160HP. Stainless steel including handmade silencers. With modification usable with wasserboxer engine in beetle.

Gasket for Streetsport Exhaust System / ArtNr.: 08072

Gasket for Streetsport Exhaust System

High Temperature Aerosol Exhaust Paint Spray Black / ArtNr.: 20110

High Temperature Aerosol Exhaust Paint Spray Black

Customsport VW WBX watercooled 1,9 T3 vanagon, stainles, handmade double silencer / ArtNr.: 21183

Customsport VW WBX watercooled 1,9 T3 vanagon, stainles, handmade double silencer. For 1,9 watercooled engines from 1982 to 1985 with 60, 78 and 90 hp. Stainless, double silencer, handmade stainless version.

Page 37/48 - Ahnendorp B.A.S. Michael Kiefer e.K. - Dreibömerweg 15 - 46419 Isselburg - Tel.:(0049) (0)2874/4047 Ahnendorp B.A.S. Manufaktur für klassische Boxermotoren Ahnendorp Wasserboxer Fächerkrümmer Auspuffanlage VW T3 Bus 2,1 Liter / ArtNr.: WBX19

Ahnendorp Wasserboxer Fächerkrümmer Auspuffanlage VW T3 Bus 2,1 Liter. Mitte der 1980er Jahre hatten wir für die T3 Busse eine Fächerkrümmer Auspuffanlage entwickelt, die alle anderen Versionen in den Schatten gestellt hatte. Im Laufe der Jahre wurde das System immer weiterentwickelt, der Fächerkrümmer wurde an kristischen Stellen verstärkt und zuletzt wurde der Schalldämpfer handgefertig aus Edelstahl geliefert. Aufgrund mangelnder Kapazitäten, haben wir die Anlage ab 2004 nur noch direkt an einen gewerbetreibenden Kunden geliefert, bis wir schließlich die Produktion komplett eingestellt hatten. Weitere Inovationen sind mittlerweile entstanden und der Umzug in unser neues Gebäude 2018 hat uns schließlich 2019 die Möglichkeit gegeben, die Produktion wieder aufzunehmen. Mittlerweile haben die ersten Busse ein H-Kennzeichen, eine Bestätigung dafür können wir natürlich mitliefern. Weitere Infos folgen!

VW T3 Vanagon WBX watercooled B.A.S. 2,1 header exhaust system stainless / ArtNr.: 21180

VW T3 Vanagon WBX watercooled B.A.S. 2,1 header exhaust system stainless. Handmade, to use with catalytic converter or replacement tube (both tubes included). Will fit on serial and modified engines. No other exhaust system gives your watercooled engine more power and a nicer sound. Will fit on many points, so the system get no cracks, also if you ride many miles. Silencers are combinatet reflection and absorbtion systems, so they are the best way to get the most power withe nice sound (not to loud!). We do not use any perfor material, so they are also on the same quality.

Catalytic converter VW Vanagon T3 WBX watercooled boxer engine 2,1 / ArtNr.: 22810

Catalytic converter VW Vanagon T3 WBX watercooled boxer engine 2,1.

Exhaust VW WBX 1,9 - Bus - stainless with new handmade silencer / ArtNr.: 21185

Exhaust stainless for WBX water cooled engine 60, 78 and 90 hp from 1982 to 1985. Header stainless, silencer new handmade stainless version. Dimension silencer : 330x155x108mm Video:

Machining Page 38/48 - Ahnendorp B.A.S. Michael Kiefer e.K. - Dreibömerweg 15 - 46419 Isselburg - Tel.:(0049) (0)2874/4047 Ahnendorp B.A.S. Manufaktur für klassische Boxermotoren

Page 39/48 - Ahnendorp B.A.S. Michael Kiefer e.K. - Dreibömerweg 15 - 46419 Isselburg - Tel.:(0049) (0)2874/4047 Ahnendorp B.A.S. Manufaktur für klassische Boxermotoren Resurfacing waterboxer heads / ArtNr.: 80083

Resurfacing waterboxer heads cylinder sealing and water jacked surface

Replace 4 valve guides inlet or exhaust / ArtNr.: 80008

Replace 4 valve guides inlet or exhaust (2 cylinder heads). Oversize for additional costs.

Replace tapered race inlet guides / ArtNr.: 80059

Replace tapered race inlet guides (2 clinder heads). Oversize for additional costs.

Grind 4 valves / ArtNr.: 80011

Grind 4 valves 45° sealing surface

Grind 4 valve tips / ArtNr.: 80032

Grind 4 valve tips

Page 40/48 - Ahnendorp B.A.S. Michael Kiefer e.K. - Dreibömerweg 15 - 46419 Isselburg - Tel.:(0049) (0)2874/4047 Ahnendorp B.A.S. Manufaktur für klassische Boxermotoren Test 8 valve springs / ArtNr.: 80168

Test 8 valve springs

Cut 4 valve seats Super Finish / ArtNr.: 80007

Cut 4 valve seats with radius, Super Finish

Replace and cut 4 valve seats / ArtNr.: 80058

Replace and cut 4 valve seats Preis in Verbindung mit Std. Überholung!!!!

Repair 1 plug thread with helicoil / ArtNr.: 80068

Repair 1 plug thread with helicoil

Alignbore of mainbearings waterboxer case / ArtNr.: 80055

Alignbore of mainbearings

Page 41/48 - Ahnendorp B.A.S. Michael Kiefer e.K. - Dreibömerweg 15 - 46419 Isselburg - Tel.:(0049) (0)2874/4047 Ahnendorp B.A.S. Manufaktur für klassische Boxermotoren Cylinder hone, fresh up (4 cylinders) / ArtNr.: 80030

Cylinder hone, fresh up (4 cylinders)

Pull of crank gear / ArtNr.: 80060

Pull of crank gear

Regrind crank all journals / ArtNr.: 80021

Regrind crank all journals

Regrind crank flange / ArtNr.: 80093

Regrind crank flange

Turn flywheel flange / ArtNr.: 80094

Turn flywheel flange

Page 42/48 - Ahnendorp B.A.S. Michael Kiefer e.K. - Dreibömerweg 15 - 46419 Isselburg - Tel.:(0049) (0)2874/4047 Ahnendorp B.A.S. Manufaktur für klassische Boxermotoren Grind flywheel friction surface and pressure plate fitting surface / ArtNr.: 80082

Grind flywheel friction surface and pressure plate fitting surface. Turning before might be needed (add extra cost).

Balancing crank / ArtNr.: 80038

Balancing crank

Balancing flywheel / ArtNr.: 80039

Balancing flywheel

Balancing flyweel and preasure plate / ArtNr.: 80154

Balancing flyweel and preasure plate

Balancing crank and flywheel / ArtNr.: 80024

Balancing crank and flywheel

Page 43/48 - Ahnendorp B.A.S. Michael Kiefer e.K. - Dreibömerweg 15 - 46419 Isselburg - Tel.:(0049) (0)2874/4047 Ahnendorp B.A.S. Manufaktur für klassische Boxermotoren Balacing crank, flywheel and pressure plate / ArtNr.: 80046

Balacing crank, flywheel and pressure plate

Balancing crank, flywheel, pressure plate and pulley / ArtNr.: 80081

Balancing crank, flywheel, pressure plate and pulley

Rebuild rods Wasserboxer / ArtNr.: 07050

Rebuild rods

Lighten, weight correction and shotblasting of rods WBX, set for one engine. / ArtNr.: 80033

Lighten, weight correction and shotblasting of rods, set for one engine. Machining of your rods! Lighten round 70 gramms for each!

Cleaning of parts in hot tank to machining / ArtNr.: 81010

Cleaning of parts in hot tank to machining

Page 44/48 - Ahnendorp B.A.S. Michael Kiefer e.K. - Dreibömerweg 15 - 46419 Isselburg - Tel.:(0049) (0)2874/4047 Ahnendorp B.A.S. Manufaktur für klassische Boxermotoren Sand blasting of parts / ArtNr.: 81011

Sand blasting of parts Keine Motorgehäuse!!!!

Replace and produce 1 valve guide inlet or exhaust / ArtNr.: 80088

Replace and produce 1 valve guide if needed, inlet or exhaust. Price for one piece!

Cylinder Head Rebuild Standard VW Wasserboxer, Set / ArtNr.: 80208

Regrind heads, resurface grind seats, cut valve seats , rebuild valves, new valve guides, price for two heads. Attention: All parts must deliver disassembled and cleaned. Otherwise we can not machine your parts or only for additional cost.

Other Parts

Piston Ring Compressor 88-96mm / ArtNr.: 40502

Piston Ring Compressor 88-96mm

Page 45/48 - Ahnendorp B.A.S. Michael Kiefer e.K. - Dreibömerweg 15 - 46419 Isselburg - Tel.:(0049) (0)2874/4047 Ahnendorp B.A.S. Manufaktur für klassische Boxermotoren Engine Bracket / ArtNr.: 40527

Engine Bracket, to fit on workbench

High Temperature Aerosol Exhaust Paint Spray Black / ArtNr.: 20110

High Temperature Aerosol Exhaust Paint Spray Black

T-Shirt Ahnendorp / ArtNr.: 90011

T-Shirt Ahnendorp Please select size

T-Shirt Ahnendorp Woman / ArtNr.: 90010

T-Shirt Ahnendorp Woman Please select size

Page 46/48 - Ahnendorp B.A.S. Michael Kiefer e.K. - Dreibömerweg 15 - 46419 Isselburg - Tel.:(0049) (0)2874/4047 Ahnendorp B.A.S. Manufaktur für klassische Boxermotoren Handcleansing Paste 250 ml (3,00 EUR/100ml) / ArtNr.: 40550

Heavy duty hand cleansing paste We use this hand-washing paste ourselves and are convinced of the cleaning effect. removes oil, graphite, metallic dust, soot, grease contains natural scrubbing agent shell powder

Crankshaft gear puller VW WBX / ArtNr.: 40512

Crankshaft gear puller VW WBX

Page 47/48 - Ahnendorp B.A.S. Michael Kiefer e.K. - Dreibömerweg 15 - 46419 Isselburg - Tel.:(0049) (0)2874/4047 Ahnendorp B.A.S. InhaltsverzeichnisManufaktur für klassische Boxermotoren

Piston and Cylinder Sets...... 1 Piston ring sets ...... 3 Case, Crankshafts, Rods...... 4 Bearing Sets ...... 5 Gasket Sets ...... 11 Heads and Supplies...... 13 and Supplies ...... 17 Oil Pumps and Supplies ...... 19 Flywheels...... 21 Carburettors, Manifolds, Supplies...... 23 Electric / Ignition ...... 26 Clutch and Supplies...... 34 Exhaust ...... 36 Machining ...... 38 Other Parts ...... 45

Page 48/48 - Ahnendorp B.A.S. Michael Kiefer e.K. - Dreibömerweg 15 - 46419 Isselburg - Tel.:(0049) (0)2874/4047

Powered by TCPDF (www.tcpdf.org)