Rings & Bases 254-275
Total Page:16
File Type:pdf, Size:1020Kb
EGW REVOLVER SCOPE MOUNT HIGH STANDARD TARGET PISTOLS RINGS & BASES INDEX Fits Ruger & S&W UNIVERSAL SCOPE MOUNT Fitting & Custom Components ....274-275 Rifle .......................... 257-274 Revolvers Factory Part Ensures A Handgun .......................254-255 Shotgun ........................255-256 Ruger - Mounts the Perfect Fit scope low on all single Lightweight alumi- and double action revolvers. Requires drilling and tapping two holes. num mount with multiple Smith & Wesson - Remove the rear sight and quickly install on newer cross-slots for Weaver-style rings allows proper scope eye relief. revolvers drilled and tapped at the factory. Locates the scope on Weighs only 2 oz., won’t affect balance. TORX screws resist strip- the top strap, over the top of the grip for better balance. Accepts WEIGAND COMBAT ping. Requires no gunsmithing. ab Weaver-style rings. ab 1 ® SPECS: Aluminum, Hard Anodized Finish. 6" (15.2cm) x /2" (12.7mm). Wt HANDGUN SCOPEMOUNTS recoil pins to prevent “scope flyoff," and SPECS: Aluminum, anodized finish, black or silver. 4" (10cm) long, in- accepts Weaver-style rings or mount = 2 oz, Black. Fits: Olympic OM, M Grip, .22 Short; Supermatic Citation RINGS & BASES cludes mounting screws. S&W fits K, L and N frame. TAURUS TRACKER SCOPE MOUNT systems such as used on Tasco 40mm SC-M, M Grip, .22; Supermatic Tournament SK-M, M Grip, .22; Supermatic - Precision-machined, aluminum red dot optics. Super Redhawk .44 #296-302-100AU Black Ruger Mount, 6B26F99 � � � � � � � �$ 29.99 Trophy STR-M, M Grip, .22; Victor VCT-M, M Grip, .22 scope mount accepts Weaver-style Mag fits only the .44 Magnum and can #296-302-101AU Silver Ruger Mount, 6B30F99 � � � � � � � � 34.99 #430-000-122AU Universal Scope Mount, 3D41Q99 � � � $ 47.99 rings to let you mount a scope on your be installed without removing the front and rear sights. Features #296-301-100AU Black S&W Mount, 6B24E99 � � � � � � � � � 27.99 Taurus Tracker. Also great for red-dot optics. Integral recoil lug a matte, silver, anodized finish. Super Redhawk Casull is similar #296-301-101AU Silver S&W Mount, 6B30L99 � � � � � � � � � 34.99 fits into rear sight notch for a rock solid hold that prevents scope in design, but uses the rear sight notch as a recoil lug to allow the movement. Requires removing rear sight. No drilling or tapping frame and mount to take maximum recoil. Fits .44 Magnum, .454 LSP HIGH STANDARD required. ab Casull, and Ruger .480 models with removal of the rear sight. Avail- SCOPE BASE 1 5 SPECS: Aluminum, silver, matte finish. 4 /2" (11.4cm) long, /16" (7.8mm) able with black, anodized finish. ab Contoured For Bull high from bottom to top of mount. 1.3 oz. (36.8g) weight. Includes SPECS: 44 Mag - Aluminum, silver, matte, anodized finish. 5" (12.7cm) Barrels mounting screws. Fits .22 LR, .22 Mag, .17 HMR. long. Fits .44 Magnum only. 2.6 oz (73g) wt. Casull - Aluminum, black, ALLCHIN S&W REVOLVER MINI STS 1 #957-000-076AU Tracker Scope Mount, 7E26I99 � � � � � � $ 29.99 matte, anodized finish. 5 /2" (14cm) long. Fits .44 Magnum, .454 Casull, Thirteen cross-slots and .480 Ruger models. Includes mounting screws. SCOPE MOUNT provide a wide range of ANACONDA/PYTHON/KING COBRA DRILL & TAP MOUNT - #957-000-036AU Super Redhawk .44 Mag Mount, Mount A Mini Red Dot On Any mounting positions; cantilever design centers the weight over Large, contoured lug fits in place of the rear sight and prevents 7E44C99 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 49.99 Pre-Drilled S&W Revolver the grip. Contoured for factory bull barrels (drill and tap). Accepts base movement under recoil. Fits factory drilled and tapped (three #957-000-050AU Super Redhawk Casull Mount, Weaver-style rings. ab 1 hole) Anacondas and current Pythons. Accepts Weaver-style rings. 7E53Q99 � � � � � � � � � � � � � � � � � � � � � � � � � � 59.99 Easy-to-install mount lets you SPECS: Aluminum, anodized, matte black finish. 5 /4" (13.3cm) long. Fits 1 7 SPECS: Aluminum, anodized, natural silver finish. 4 /2" (11cm) long, /8" upgrade any pre-drilled S&W revolver LSP Match barrels, factory bull barrels require drilling and tapping. In- (22mm) wide, 1.7 oz. (48 g) wt. Installation requires drilling and tapping of RUGER SINGLE SIX - No-drill, no-tap with a small red dot sight. Machined cludes instructions and screws. frame. Includes screws and instructions. ab mount attaches to frame at the rear aluminum construction offers durability #530-500-001AU High Stnd. Scope Base, 3E27B99 � � � � $ 29.99 HANDGUN #957-107-101AU Silver Anaconda Mount, 7E31D99 � � � $ 34.99 sight screw. Contoured recoil lug fits and weight savings. Mount body align- in rear sight slot to prevent movement. ment holes accept C-More STS, Burris 1 REDHAWK 6" & 7 /2" BARREL - Strong, lightweight mounts avail- Accepts Weaver-style rings. Use on .22 Fastfire, JPoint, Optima 2000, Leupold Delta Point, Sig and most able for Ruger Redhawk mod- LR only, not for use on .32 Magnum guns. ab other small red dot sights. Positions red dot over the rear sight and 1 1 els with 6" or 7 /2" barrels. Re- SPECS: Extruded aluminum, black or silver, anodized, matte finish. 4 /2" as close to the bore as possible for fast target acquisition. ab 7 move rear sight for installation, (11cm) long, /8" (22mm) wide, 1.3 oz. (38 g) wt. Includes mounting screws. SPECS: 6061 T6 aluminum, hardcoat anodized clear (silver) or matte LSP S&W 41 LONG SCOPE BASE no drilling or tapping required. Uses a front sight replacement #957-000-043AU Silver Single Six Mount, 7E31Q99 � � � � $ 34.99 black. 2.5" (65mm) long. 1" (27mm) wide. .6 oz. (17g) wt. Includes mount- block for attachment at the muzzle end and the rear sight eleva- #957-000-042AU Black Single Six Mount, 7E31L99 � � � � 34.99 ing hardware Extra Long For Precise tion hole for attachment at the back of the top strap. Rear sight #100-010-548AU S&W Revolver Scope Mount, Black, Eye Relief notch becomes a rock-solid recoil lug for consistent accuracy. S&W REVOLVER - Low profile and 5K38D99 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 44.99 Eight cross-slots allow you to position your optics for optimum eye Six inch long rail lets lightweight. Fits newer, factory drilled #100-010-549AU S&W Revolver Scope Mount, Silver, relief. Accepts Weaver-style rings or mounting systems. you precisely tailor eye ab and tapped K, L and N frame revolvers; 5K38E99 � � � � � � � � � � � � � � � � � � � � � � � � � � 44.99 SPECS: 6063 T6 aluminum, silver or black, matte, anodized finish. 6" no gunsmithing required. Older revolv- relief for each shooter. Fits factory drilled and tapped barrels; drill 15 13 1 Bbl. - 7 /16" (20.1cm) long x /16" (2cm) wide. 3.1 oz. (87g) wt. 7 /2" Bbl. - 10" ers require drilling and tapping. ab and tap older barrels for custom mounting applications. Accepts all 13 (25.4cm) long x /16" wide. 4 oz. (113g) wt. Includes mounting screws. 1 Weaver-style rings. ab SPECS: Extruded aluminum, black or silver, anodized, matte finish. 4 /2" 7 SPECS: Aluminum, black, anodized finish. 6" (15cm) long. Separate mod- #957-000-071AU Redhawk 6" Bbl. Mnt, Silver, 7E53C99 � � $ 59.99 (11cm) long, /8" (22mm) wide, 1.3 oz. (38 g) wt. Includes mounting screws. 1 1 els for 7" Long or 5 /2" Long Heavy barrel. Includes screws, instructions. #957-000-073AU Redhawk 7 /2" Barrel Mnt, Silver, #957-113-100AU Black S&W Mount, 7E31G99 � � � � � � � � $ 34.99 #530-041-007AU 7" S&W M-41 Mount, 3E28C99 � � � � � � �$ 31.99 7E57Q99 � � � � � � � � � � � � � � � � � � � � � � � � � � 64.99 #957-113-101AU Silver S&W Mount, 7E31K99 � � � � � � � � � 34.99 and tapped receivers for fast, easy, 1 1 2 #957-000-074AU Redhawk 7 /2" Barrel Mnt, Black, no-gunsmithing installation. Fully #530-041-055AU 5 / " S&W M-41 Mount, 3E28A99 � � � � � 31.99 7E57F99 � � � � � � � � � � � � � � � � � � � � � � � � � � � 64.99 BUCKMARK - Convert open sight, contoured to fit flush on top of the re- Browning Buckmark for scope use; ceiver or barrel without unsightly gaps. REDHAWK/BLACKHAWK - Drill and tap no gunsmithing required. Accepts all Extra-strong, lightweight aluminum; mount attaches the scope to your Ruger’s Weaver-style rings. ab accepts Weaver-style rings. Can be easily installed on non-factory top strap. Fits Ruger® Redhawk®, Blackhawk® SPECS: Aluminum, black or silver, matte fin- drilled and tapped pistols. ab STRATTON CUSTOM ® 1 and Super Blackhawk . Accepts Weaver-style 4 3 ish. 6 / " (15cm) long, 1.7 oz. (54 g) wt. Fits Browning Buckmark, Standard SPECS: Extruded aluminum, anodized, black or silver. 4 /4" (12cm) THOMPSON/CENTER ENCORE rings. ab model only. Includes mounting screws. long,Includes mounting screws. Fits Mark I, II, III, and 22/45™. SPECS: Extruded aluminum, silver or black, anod- #957-100-200AU Black Buckmark Mount, 7E26M99 � � � $ 29.99 MAGNUM SCOPE BASE 1 7 #957-108-022AU Black Mark I/II/III Scopemount, ized, matte finish. 4 /2" (11cm) long, /8" (22mm) #957-000-034AU Silver Buckmark Mount, 7E26P99 � � � 29.99 7E21B99 � � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 22.99 wide, 1.3 oz. (38 g) wt. Includes mounting screws. Requires drilling and Strong Enough To tapping. #957-108-002AU Silver Mark I/II/III Scopemount, RUGER MARK I/II/III NO-GUNSMITH- 7E19P99 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 20.99 Withstand The #957-124-100AU Black Ruger Mount, 7E31D99 � � � � � � � $ 34.99 ING - Install conventional or red dot Sharpest Recoil #957-124-101AU Silver Ruger Mount, 7E31D99 � � � � � � � 34.99 optics on your pistol in only minutes. X-FRAME SCOPE MOUNT - Low profile Weaver-style bases Lightweight, aluminum mount attaches with the strength of stainless steel, this new have cross-slots for three rings and provide extra strength to with- REDHAWK/BLACKHAWK HUNTER - to a pre-drilled and tapped, dovetail-filler S &W scope mount accepts Weaver-style stand the recoil of the really hard-kicking calibers. Gives added No-drill, no-tap mount fits Redhawk and block.