Best Value Guaranteed

Often Copied, Never Equaled kmstools.com

February 2011 AdditionalJan 14th To 16th INVENTORY Savings BLOWOUT During Feb 17th To 19th Month Deals in Every Sorry! No Rainchecks Department Selection Varies By Store Will Transfer To All Locations

• Loads of smokies & POP on 3 Day Sale Unadvertised Check your store Specials in for availability Each Store Bosch 2pc 12V Li-Ion • Powertools At or Combo Kit • Includes 1/4" hex drill/driver (80in/lbs), below cost 1/4" impact driver (800in/lbs), two batteries, charger and case Reg. $219.99 • 1/2 Priced Name BOB-CLPK21120 Brand Handtools $15995

Up to Save Feb 17th To 19th 75% OFF $70 95 Nailers $149 1 Up to Bessey 11 /2" Snip 35% OFF And Utility Knife Generators 50% Less Hand Force Required • Self-opening jaws & extra large ringed handles Up to • Knife has one-hand easy Feb 17th To 19th 40% OFF opening and closing XX-BES-SPCPK2PC $1995 Compressors $2995 Up to 40% OFF Welders Visit Your Local Store For Instore Specials Check kmstools.com & kmscarparts.com For Late Additions Hand Tools INVENTORY BLOWOUT Sorry! Sorry! No Rainchecks Selection Varies By Store No Rainchecks iGaging 6" SAE/MET 19pc Impact SAE Standard Digital Caliper Socket Set 1/2" DR • Extra-Large LCD Screen - Instant 1/2 Great for on the job or home use HOT SAE-Metric Conversion 1 DEAL • External, internal, depth and • Sizes range from 3/8"-1 /2" PRICE Compare at $149.99 step 4 way measuring XX-CRI-GW84932 • Hardend stainless steel Reg. $29.99 95 IGA-100030 $79 Feb 17th To 19th 95 Save $14 $5995 $90 Vise-Grip 5" Curved 17pc Large Tap and Die Jaw Locking Pliers SAE Set Lifetime Warranty • Large Ratcheting T Wrench, Large Locking • The Original Tap Adapter,Large Hex Die Adapter • Curved jaw puts tremendous pressure on • SAE Thread Gauge,Taps Hex Dies four points of any style nut or bolt head • NC and NF in the following sizes Reg. $14.99 9/16", 5/8", 3/4" Feb 17th To 19th VIS-5WR Compare at $169.99 XX-CRI-GW82808 95 $995 Save 95 $69 33% $89 Save Made Proto 1/2" Drive in USA $100 Precision Torque Wrench 63pc SAE/Metric 6 Pt. Click Type - Ratcheting Head • Positive locking mechanism makes it easy Set, 3/8" DR to dial and lock in the desired torque • Comes with the following sizes • Ideal tool for the professional user • 1/4" - 1" Std. and Deep Feb 17th To 19th • Torque range 50-250 ft/lbs • 6 mm - 22 mm Std. and Deep Reg. $292.99 Save • 5/8" Spark Plug Socket 3/8" Dr. 95 PRT-6014C • 13/16" Spark Plug Socket 3/8" Dr. $69 95 $100 Compare at $169.99 $192 XX-CRI-GW80718 $8995 Save $100 Save up to Lenox Aviation Snips 1 90% • Quality Wire Spring Will Last A Lifetime Save 8" Long 7 /4" • Cuts sheet metal up to 18 gauge and stainless steel up to 22 gauge 22% Nose Pliers Linesman Pliers Reg. $21.99 Compare at $19.99 Compare at $14.99 LEN-22101 (Left) XX-GB-GPS238 XX-GB-GS87 LEN-22102 (right) LEN-22103 (Straight) $395 $149 $1695 Lenox Screwdrivers 6-In-1 9-In-1 7" Combination Pliers • Contains #1, #2 Phillips, • Contains #1, #2 Phillips, XX-HAW-TP1001E Save 3/16", 1/4" slot driver 3/16", 1/4" slot, #2 and bits plus 1/4" and #3 Robertson driver 90% 5/16" nut drivers bits plus 1/4", 5/16" 7" Long Nose Pliers Reg. $9.99 and 3/8" nut drivers XX-HAW-TP1002E LEN-23931 Reg. $13.99 95 Save LEN-23932 Save 7" Diagonal Cutters $7 20% $1095 XX-HAW-TP1003E Compare at $9.99 21% Your Choice ¢ 2 99 Feb 2011 Hand Tools INVENTORY BLOWOUT Magnum 6" Digital Caliper Sorry! No Rainchecks Selection Varies By Store • Large digital display reads in SAE and metric Designers Edge 16 LED • Lightweight carbon fibre body Reg. $14.99 MAG-1049 Cordless Trouble Light 95 • Aerospace grade aluminum body 1/2 $9 • 6 Hour working time at 30 lumens • Heavy duty magnet on bottom of handlePRICE • Anti-roll design • Includes 3 AAA batteries Save Compare at $32.99 33% XX-DES-L1403 $1695 Performance Tool Feb 17th To 19th Allen 18pc 14oz Grease Gun 95 Screwdriver Set Uses Standard 14oz. $9 Lifetime Warranty Grease Cartridge • Ergo handles for comfort & power • Heavy duty construction Save • Includes: 5 Slot, 6 Phillips, 2 • Short stroke lever action Torx & 1 offset screwdrivers • Positive lock 33% & 4 hooks & picks • Knurled thick wall barrel Reg. $39.99 Reg. $14.99 ALN-66625G WIL-W54203 95 Save 95 Sorry! $21 45% $12 No Rainchecks Grease Cartridge Allen 10pc SAE • White multi-purpose grease • Calcium sulfonate base Combination Wrench Set • 400 grams Reg. $5.99 Lifetime Warranty KF-909 We stock grease for most • 1/4" - 3/4" 1/2 95 applications including: • Industrial wrenches made for PRI $4 performance, durability & value CE High temperature, water • 12 Point box end for tight resistant, high viscosity work spaces and aerosol • Full polish finish Reg. $29.99 ALN-66646G Adjustable Wrenches 95 Metric 8 - 19mm Model available • High quality, chrome vanadium $14 ALN-66647G steel construction 1/2 • Metric scale on one side PRI 10" 12" CE All Allen Reg. $9.99 Reg. $11.99 MAG-AW10 MAG-AW12 $695 $795 Socket Kits

Feb 17th To 19th Feb 17th To 19th 50% $495 $595 OFF Stanley 6pc Precision Titan 170pc Titanium Screwdriver Set Coated Drill Bit Set Lifetime Warranty Lifetime Warranty • Swivel-head handles • Last up to 6x longer than • Soft cushion grip normal bits • Includes #0 and #1 Phillips • 19 Different drill bit sizes: plus 4 slot screwdrivers 21/64 - 5/16 Reg. $12.99 Reg. $79.99 ST-66052 T T N-11170 95 Save 95 $10 Feb 17th To 19th $49 Save 31% $895 $30 Feb 2011 3 Hand Tools INVENTORY BLOWOUT Sorry! No Rainchecks Selection Varies By Store MTP 36" Borescope Allen 1/2" Drive • Flexible video borescope with 1/2 built in adjustable dual LED light 9pc SAE Set PRICE • Glare-free, high resolution • 12 Point sockets: 3/8", 7/16", 1/2", image & optical system 9/16", 5/8", 11/16", 3/4", 13/16", 7/8" • Shaft can be exposed to water Compare at $19.99 • TV Video output for XX-CRI-ALN66641 capturing images Reg. $199.99 $995 MTP-TF2809X Feb 17th To 19th $17995 Save 95 XX-CRI-ALN66642 $139 Metric model also available $60 Jet Strap Style Swivel Oil Filter Wrench Magnum Brass Club • Handle swivels to clear obstructions 1 1 Hammers 1 /2 lb 2lb • Fits 3" to 3 /2" diameter oil filters • With fibreglass handle Reg. $21.99 Reg. $24.99 • Rubberized handle grip MAG-HB24H MAG-HB32F Compare at $8.99 XX-JET-NPN Save 95 95 up to $15 $18 $295 27% Save 67%

1 KD 1/2" Drive Round Proto 7 /2" Curved Made Feb 17th To 19th Head Ratchet in USA Jaw Locking Pliers • Knurled handle for nonslip grip and With Wire Cutter 95 reversible quick flip lever • Tip of release lever projects past $19 • Drop forged and nickel chrome plated end of handle for a quick, no-pinch, • 8° swing arc and 45 teeth for powerful release especially Save use in confined areas when tool is firmly locked Compare at $43.99 XX-KD-731119 • Drop forged jaws and rugged tooth 41% profile for durability and toughness 95 Reg. $33.99 $19 PRT-J294WRXL 1/2 $2495 PRICE Wera Kraftform Performance Tool Kompakt Multi-Driver 3pc Step Drill Bit Set • Bits suitable for hand & power drivers Titanium Nitride Coated • Includes 1/4" hex socket, 2 Save • 17 Hole sizes, 1/4" to 3/4" slot, 2 Phillips & 2 Robertson • 1/4" Hex drive shanks bits & pouch with belt loop 42% Reg. $19.99 Reg. $49.99 WIL-W9003 WER-051025 95 $2895 $17 Feb 17th To 19th Save $1295 35% Neiko 8pc Prentice 1/2 Drill Bit Set PRIC Magnum Tubing Cutters E 1 • Made from industrial quality HSS 8 • Black and gold surface treatment Cuts 1/8" - 1 / " Cuts 1/8" - 5/8" holds lubricant for smoother drilling OD Tubing OD Tubing • 135° split point for faster • Includes spare cutter • Ideal for working penetration and accurate starting wheel and reamer in extremely • Tri-flat 1/2" shank for secure chucking Reg. $8.99 tight spaces • Sizes: 9/16" - 1" in 16ths MAG-1060 Reg. $3.99 Reg. $89.99 95 MAG-1066 RRT-10230B $6 95 $4495 $2 Save up to 4 Feb 2011 26% Hand Tools INVENTORY BLOWOUT Lancer 40pc Sorry! No Rainchecks Selection Varies By Store Precision SD Set Walter 29pc SST • Includes Philips, slot, hex, Quick Shank Jobber & torx bits, comfortable grip handle, bit extension, Drill Bit Set and flexible bit extension Compare at $34.99 Professional Quality XX-LAN-10905 • 1/16" - 1/2" by 64ths Sorry, No • 135° Split points prevent walking 95 • Exclusive hexagon shank for $24 Rainchecks positive chucking every time Reg. $251.99 WAL-SP29HS Feb 17th To 19th Save $7995 $172 95 1/2 $14 PRICE GearWrench 21pc 3/8" Dr Norgren Spot Weld Cutter SAE 6 & 12 Pt Socket Kit • 8mm (5/16") • Cobalt alloy Lifetime Warranty Reg. $13.99 • 3" & 6" Extensions NOR-37470 • Shallow & deep sockets • Fully polished Save 95 Save teardrop $9 Made $30 in USA ratchet 28% Reg. $79.99 GW-80557 Titan 13pc $4995 SAE Ball End Hex Key Set Irwin Vise-Grip 2pc • Long arm Save • Sizes Include Save Fast Release Pliers 0.050 - 3/8" Lifetime Warranty 62% Reg. $12.99 TTN-12721 31% • Includes 7" & 10" curved jaw locking 95 pliers with $10 Feb 17th To 19th wire cutters Compare at $39.99 95 XX-VIS-214T $8 95 9pc Metric model also available $14 TTN-12722 Gardner Bender 6-in-1 Moovit High Circuit Alert Screwdriver Performance • Voltage range: 50V to 600V • Handle sensor detects AC voltage Penetratring Lube without contacting live conductors • 350g Aerosol • Audible and visual alert system • Loosens rusted, seized • With #1 and #2 Phillips, 3/16" and 1/4" parts with ease slotted bits plus 1/4" and 5/16" nutdrivers Compare at $27.99 • User friendly, solvent free XX-GB-SDT15 Reg. $9.99 LLO-11014 Save 95 95 $7 $7 20% Save 71% Magnum Pex Crimp Ring Removal Tool MTP All-In-One Digital • Use this tool to recover Pex fittings without damage to the fitting's sealing surface Multimeter • The cutting blade penetrates only 2 Year Warranty the ring and the Pex pipe • AC/DC amps 2mA - 10A Reg. $34.99 Save • AC Volts 200mV - 700V MAG-1300 • DC Volts 200mV - 1,000V 95 28% • Resistance and capacitance $27 • Temp C° and inductance • Audible and visual indicators Feb 17th To 19th Reg. $68.99 MTP-2325 Save $2495 95 Feb 2011 $49 27% 5 Stanley 4pc Tool Boxes Parts Bin Set Ernst Flex Fit Wrench • Includes wall 1/2 mounting rack Organizer Save • Unique lock-in stacking PRICE • Holds 15 wrenches Reg. $17.99 • Made with fuel and solvent 33% ST-056304M resistant materials 95 Reg. $11.99 Red ERN-5088 Made $11 Black ERN-5089 in USA 20" 3 Drawer Portable $795 Tool Box Save Ball Bearing Slides Red Or Black • 20"W x 8.5"D x 11.8"H 26% Ball Bearing Slides • Includes built-in lock • Extra strength rolled drawer edges • Features pivoting top tray for small parts • Heavy duty side handles • Drawers lock when • Includes drawer liners lid is closed Reg. $60.99 TBR-TBD133X 26" 9 Drawer Top Chest • 26"W x 12.1"D x 17.1"H 95 Reg. $199.99 $44 TBR-TBT4009X TBR-TBT4009XB $18995 Save Feb 17th To 19th 95 Performance Tool $20 $179 Stainless Magnetic Tray 27" 7 Drawer • Strong magnets keep small metal parts & tools in place even when inverted Roller Cabinet • 27"W x 18"D x 39"H Save Reg. $398.99 up to TBR-TBR4007X TBR-TBR4007XB 33% $35995 Round Rectangular Feb 17th To 19th Reg. $14.99 Reg. $17.99 WIL-W126 4 WIL-W1265 Save 95 $995 $1295 $49 $349 41" 8 Drawer Magnetic Tool Bars Save • Ideal for wrenches and screwdrivers up to Top Chest • Keeps your frequently used 30% • 41.4"W x 17.5"D tools conveniently at hand x 21.7"H Reg Sale Reg. $451.99 TBR-TBT4408X 12" aj-chimh012 $9.99 $6.95 TBR-TBT4408XB Save 95 Feb 17th To 19th aj-chimh018 $399 $62 13 $10.99 $7.95 $38995 17 aj-chimh024 $11.99 $8.95 42" 11 Drawer Roller Cabinet Hansen Socket Holders • 42"W x 18"D x 39.6"H • Includes heavy duty casters with grease nipples 1/4", 3/8" or 1/2" Reg. $734.99 TBR-TBR4411X • SAE/Metric TBR-TBR4411XB • Organize your sockets for quick, easy identification by size & type 95 HANs-1401 $649 HANs-1402 HANs-3801 HANs-3802 Feb 17th To 19th HANs-1201 HANs-1202 $59995 Save From $995 $135 6 Feb 2011 Tool Boxes INVENTORY BLOWOUT Sorry! No Rainchecks Selection Varies By Store Storage Cabinets Waterloo 26" 7 Drawer • Multi-drawer design for storing a wide variety Top Chest of parts & supplies 7 Year Warranty • Clear drawers for quick, easy • Ball bearing slides identification of contents • 26.1" W x 17.8" D x 19.8" H • Posi-latch drawer system Drawers Reg Sale 3-Day • Sidewall post construction • Liners included 18 so-ds18 $34.99 $24.95 $19.95 Reg. $699.99 WAT-TRX267 Save 27 so-ds27 $28.99 $21.95 $17.95 $44995 $250 39 so-ds39 $34.99 $24.95 $21.95

so-ds60 SPG 41" 4 Drawer Chest 60 $40.99 $31.95 $26.95 • Full length drawers • Double wall construction Save • Reinforced chest top Parts up to • Ball bearing slides 50% Reg. $449.99 Containers SPG-VRT4204 $19995 Save Compartment Reg Sale 3-Day $250 10 so-sbr10 $7.99 $5.95 $3.95 13 so-sbr13 $9.99 $7.95 $5.95 Waterloo 40" 9 Drawer 17 so-sbr17 $11.99 $9.95 $7.95 Top Chest Ball Bearing Slides Save • 40.5" W x 16"D x 19.8" H $250 Socket Box • Tri channel construction provides • 10" x 5" x 1.5" extra strength and durability • Great for socket or • Full extention other tool storage drawers • Sturdy all metal • 5 Year warranty construction Reg. $599.99 Reg. $11.99 WAT-PMX4009 TBR-TBH112 Save 95 $695 42% $349 Astro Pneumatic 2 Tray Waterloo 41" 13 Service Cart Drawer Roller Cabinet 300lb Capacity Ball Bearing Slides • 18"W x 32"L x 31"H • 41" W x 19"D x 32 2/5" H • Heavy duty molded Save • Tri channel construction plastic that never provides extra strength dents and $30 and durability • Full extention drawers never rusts 1 • 4" Casters • 4 /2" HD Casters Reg. $109.99 Feb 17th To 19th • 5 Year warranty AP-8330 Reg. $899.99 95 WAT-PMX4113 95 $79 Save $89 $59995 $300 54" 5 Drawer Steel Tall Storage Work Bench Save Cabinet Ball Bearing Slides $46 • 36" x 18" x 67" Save • 54" W x 20"D x 34"H • Built to last and $34 • Heavy duty easy to install metal • All metal construction work surface with powdercoat finish • Extra strength • Great for any home or rolled drawer edges commercial workshop • Includes drawer liners Reg. $283.99 Reg. $325.99 TBR-TGB3618 TBR-TSA5405TX 95 $24995 Feb 2011 $279 7 Autobody INVENTORY BLOWOUT Sorry! No Rainchecks Selection Varies By Store Eastwood Rust Magnum Wooden Save Dissolver • Easy to use: Wire brush off the loose Tear Drop Mallet 65% rust and scale, apply the gel with a Type 1 OR Type 2 brush and it will penetrate deep into the • Ideal for sheet metal forming metal, dissolving the rust overnight • All wooden construction Reg. $28.99 • 1 Quart MAG-4043 (Type 1) Reg. $33.99 EAST-12096 Feb 17th To 19th MAG-4044 (Type 2) Save $995 $2995 $26 95 20% Magnum Double Save USC Fiberglass • Strong and flexible Pad Suction Cup 44% • Bonds to most rigid materials • Great for lifting flat objects, • Easy to shape installing windsheilds • Resists acid and water and pulling out dents • Ideal for contouring • Lifts up to 80 lbs Reg. $11.99 Reg. $17.99 USC-FGC8 (Cloth) MAG-SDP2P USC-FM8 (Mat) Resin 95 95 • Thicker viscosity for $9 $9 less runs and sags • Fast curing Magnum Leather Save • Includes hardener 1 Quart 1 Gallon Sand Sack $27 Reg. $28.99 Reg. $61.99 • 12" Filled USC-K1200 USC-K1400 • Supports the sheet metal while 95 95 still allowing metal to stretch Reg. $76.99 $22 $52 MAG-4050 $4995 Black Anti-Rust Paint Aerosol Performance Tool Door • 12oz Aerosol • Ideal for use on frames, wheel Upholstery Clip Remover wells and any other rust • Specially designed for removing a large prone area on vehicles variety of interior upholstery clips Reg. $17.99 Feb 17th To 19th Reg. $11.99 ZER-2862SP Save WIL-W80645 Save $1595 22% 95 $395 67% $13 "Uni-Spotter" Starter Magnum Beating Fist Dolly • Great for hard to reach areas Stud Welder Kit when forming sheet metal • Includes welder, flexpert studs, stud Reg. $61.99 1/2 welding tip and deluxe slide hammer MAG-4035 PRI • Great base to build a 95 CE complete Uni-Spotter $29 stud pulling system • Stud ease technology Reg. $419.99 Astro Pneumatic Portable HS-4550 Work Stand $29995 • 500lb Capacity Save • Great for working on doors, fenders, hoods & bumpers Feb 17th To 19th $140 • Height adjusts 33" - 40" Reg. $55.99 Save 95 AP-557003 $279 $2995 46% 7pc Autobody Repair Kit Performance Tool 2lb • Ideal autobody repair starter kit • Comes with 3 hammers Slide Hammer and 4 dollies Reg. $22.99 Reg. $43.99 WIL-W2016C EUT-CXT5005 95 95 $15 $29 Save Save Feb 17th To 19th 95 8 31% Feb 2011 43% $12 Shop Equipment Master Lock Truck Bed Save up to Security Locking System 28% Keep Your Gear Yours! Ratcheting Tie-Down Strap • Multiple mounting options Retractable • Cannot be removed when 1 • 1 /2" x 15' mounted in truck bed • Rated to 4000lbs • Fits late model Ford, Reg. $28.99 Chevy, Toyota, and Dodge ERK-01330 Reg. $40.99 95 MAS-8287DAT $22 $2495 Save Ratcheting Cargo Tow Strap 39% • 10,000lb Capacity Strap 2 Pack • 2" x 20' • 1" x 15' Reg. $29.99 Master Lock 2000lb • Rated to 1200lbs ERK-09301 • 400lb Work load limit Reg. $17.99 95 Boat Winch ERK-34401 $22 • 9' 9" Remote Save 95 cable lead $29 $12 • 30' Cable length • Bolt on mount or hook over trailer ball Full line of cargo straps available Reg. $98.99 MAS-2953AT Chrome 2" Trailer Ball 95 • 1" Shank $69 Reg. $9.99 BR-777897138788 Save 95 30% Performance Plus $6 Folding Platform Trailer Jacks Great For Commercial Or Home Shop Use 1 1 • Bolt on or weld to your trailer • 19 /2" H x 15 /4" W x 30" L • 10" Lift • Heavy duty aluminum 1000lb 1500lb construciton • Includes 6" • Includes 8" dually Reg. $59.99 swivel wheel swivel wheels WIL-W54 039 Reg. $43.99 Reg. $78.99 BR-TJ0601K BR-TJ0602K Save $3795 $3695 $5995 $19 Save 36% 16 Gal HEPA Wet-Dry Ingersoll Rand 1 Ton Vacuum Vacuums • 116 CFM Come-A-Long Save • No need to change filters when Reg. $549.99 ASME Rated For switching from dry to wet DUS-16006 $50 (the filters never get wet) 95 Commercial Use • Quiet operation, only 81 dB $539 • 20' of 3/16" aircraft quality cable • Specifically designed for • Heavy gauge steel handle and frame construction • Stainless steel springs for industry ToolSync rust free years of use Reg. $119.99 Version IR-P15D3H • Start and stop your power 95 tools and dust $69 collection vacuum without tripping Save breaker switches up to Reg. $632.99 DUS-16011E Hi-Lift 3 Ton 48" $33 $59995 Farm Jack Meets ANSI Standards • Lift, hoist, pull, or push up to 4660 lbs rated capacity • Cast and stamped steel Dust Shroud Save construction • Economical dust control • Includes top winch connector • Flex-flange connecting 26% • 7000lb Rated safety collar fits most hand grinders bolt will shear at its max and load will not lift • Captures 99% of airborne dust Reg. $109.99 Reg. $40.99 HL-484 DUS-D1836 Save 95 95 $29 Feb 2011 $69 $40 9 Shop Equipment INVENTORY BLOWOUT Sorry! No Rainchecks Selection Varies By Store Performance Tool Magnum Platform Mechanics Seat Service Carts • Padded cushion seat • 300lb Capacity • Includes tool & • 4" Solid rubber tires 29" x 18" parts tray and 1 Save • Easy fold down handle Deck Surface four 2 /2" wheels Reg. $57.99 • Height: 15" 37% MAG-PH150 Reg. $34.99 WIL-W85007 95 1/2 $28 PRICE $2995 Feb 17th To 19th Save 95 $30 36" x 24" $21 Deck Surface Reg. $77.99 MAG-PH300 Performance Tool 40" $4795 Low Profile Creeper 7/8" Clearance • One piece, high impact polymer plastic • Resistant to solvents, grease and fuel Magnum 600lb Save • Six smooth-riding 3" wheels Furniture Dolly 41% Reg. $56.99 • 3" Swivel casters WIL-W85006 • Carpeted ends 95 1 • 18"W x 30"L x 5 /2"H $49 Reg. $28.99 MAG-TC0500 Feb 17th To 19th 95 Save $16 $12 $4495 Magnum Magnetic Long Nyalox Bench Save Grinder Wheels 30% Reach Pick-Up Tool • Lasts up to 10x longer than wire brushes • Nylon strands impregnated with abrasive grit Great For Nails & Bolts • Ideal for removing paint and • 25lb Capacity corrosion from wood or metal • 27" Long handle • Maintains shape and • Quick release handle will not rust! Reg. $14.99 Reg. $22.99 MAG-MPT25 Coarse DIC-541756 95 Extra Coarse DIC-541746 $9 Save 95 33% $14 CGW Bench Record 8" Bench Vise Save • Strong fixed base Grinding Wheel 20% • Ideal for heavy • 80 Grit, 6" x 3/4" x 1" shop use • With 3/4", 5/8" and 1/2" arbors Reg. $230.99 • Brown aluminum oxide grain REC-8 for general purpose grinding 95 Reg. $19.99 $199 Save BW-6341BR80 $31 $1595 Magnum 6" Bench Vermont American Grinder 8" Wire Wheel • 1/2HP • For use on bench grinder to remove rust, dirt, • 3450RPM paint or scale on metal or wooden surfaces • Includes guards, • 5/8" Arbour tool rests and Compare at $19.99 grinding stones Fine XX-VA16808 Reg. $65.99 MAG-RBG625 Coarse XX-VA16807 95 95 $49 Save $12 Save 10 $16 Feb 2011 35% Shop Equipment INVENTORY BLOWOUT Sorry! No Rainchecks Selection Varies By Store Performance Tool 2 Ton Fold-Up 3 Ton Jack Stands Reg. $27.99 Engine Hoist WIL-W41022 • Max lift height 7’8" 95 • Folds up to save Feb 17th To 19th $19 floor space Save 1 • 2 /2" Steel 95 casters Save $179 28% Reg. $262.99 WIL-W41029 $83 $21995 Magnum Square 1/2 Oil Drain Pan PRICE With Screen • Heavy duty poly drain pan 1000lb Chain Engine Sling • 2.2 Gallons • Heavy duty 34" chain Reg. $5.99 • Adjustable MAG-ODPS • Includes bolt plates 79 • Heat treated alloy steel $2 Reg. $17.99 Save WIL-W41032 28% $1295 AutoLoc Smart Charge Heavy Duty 3 Ton Digital Battery Charger Ideal For Stored Floor Jack Cars, Boats, Etc Rapid Lift • Accucharge • Lift range: technology extends 5 4 /8" - 20" battery life • 3 Pumps lifts • Trickle charge to full height Reg. $24.99 • Conforms 1HOF-22909 to ANSI 95 Save standards $14 Reg. $188.99 40% WIL-W1616 Save Feb 17th To 19th 95 95 $139 $59 $129 Magnum 1 Ton Heavy Duty 2 Ton Arbor Press • 1" Ram 3 Floor Jack • 4 /4" Throat height 1 • 3 /2" Throat depth Quick Pump Lift, Twice as Fast Reg. $76.99 • Low profile MAG-AP1 • Lift range: 3 95 2 /4" - 20" • Includes rubber $69 Feb 17th To 19th saddle pad • Wide load Save 95 wheels $17 $59 Reg. $197.99 WIL-W16 42 Save Feb 17th To 19th $14995 95 750Lb Engine Stand $58 $139 • Adjustable width and depth for most engines • Heavy duty 3" casters for easy rolling Non-Slip Anti • Adjustable cam buckle Save straps included Reg. $63.99 Fatigue Mats 31% WIL-W41037 • Great for the workshop • 6 Interlocking 24" x 24" tiles 95 • Covers 24 sq ft $49 • 12mm Thick • Connect together to cover larger areas • Includes edge pieces Save Reg. $28.99 WIL-W88989 $14 95 $19 Feb 2011 11 Metalworking INVENTORY BLOWOUT Sorry! No Rainchecks Selection Varies By Store Magnum Hand Shears Magnum Hand • Cuts 1/2" round steel bar and 1/8" flat steel bar Shrinker/Stretcher Reg Sale 3-Day • Shrink & stretch pieces on vehicle 10" mag-hs10 $131.99 $109.95 $99.95 Reg. $241.99 MAG-SSHAND 12" mag-hs12 $142.99 $119.95 $109.95 95 $99 Save Save $142 up to $33 Magnum Louvre Punch, Magnum Throatless Shear • 3mm/11 Gauge capacity Shear, Brake & Corner • 4" Hardened alloy steel blade • Makes straight, curved and irregular cuts Notcher Reg. $157.99 Includes Stand MAG-4011 • 12" Deep throat 95 • Can be used as a standard arbor press $139 • Includes 3" louvre punch, 4" press brake, 4" shear, 1 3/4" corner Portable Hydraulic Pipe notcher and all mounting plates Compare at $1599.99 MAG-BP3TKIT Bender • 15 Ton 95 Save • Includes 8 dies $549 1 • Bends 1/2", 3/4", 1", 1 /4", $1050 1 1 1 /2", 2", 2 /2" & 3" pipe 3 • Ram has 9 /8" stroke Reg. $241.99 Magnum Heavy Duty TBR-TA1502 95 Feb 17th To 19th Save Shrinker/Stretcher $199 95 • 18 Ga mild steel capacity $189 $52 • 8" Deep throat • Operated with foot pedal or handle • Includes dies for shrinking & JD Squared stretching and stand Reg. $577.99 Hydraulic Kit MAG-4005 • Adapt you Model 3 bender to use a hydraulic 95 ram (For use with ENERPAC or O.T.C. Rams) $349 Save • Threaded cylinder mounting block, threaded ram extension, clevis and yoke pin $228 Reg. $153.99 JDS-101012 Magnum Hand Notchers 95 Save $119 Made 3 Ton in USA $34 Reg. $399.95 MAG-HN3 $25995 Save 10 Ton Hydraulic Cylinder $140 • Fits JD Squared benders • 14" Stroke Save 4 Ton Reg. $472.99 Made Reg. $493.99 JDS-100168 in USA MAG-HN4 $53 95 Save $41995 $359 $134 Magnum Rotary Tables • Mounts vertically or horizontally • Ideal for intricate and accurate circular milling Magnum Shrinker/ 10" Reg. $524.99 Stretcher Stand MAG-TRVH10 • Great stand for use with our 95 Save MAG-4007 and MAG-SSSET2 $279 shrinker/stretchers $245 • Includes mounting bolts 12" • Foot operated Reg. $734.99 Reg. $157.99 MAG-TRVH12 MAG-4006 $39995 Save $8995 Save $335 $68 12 Feb 2011 Metalworking INVENTORY BLOWOUT King Canada 4" Swivel Sorry! No Rainchecks Selection Varies By Store Base Milling Vise Milwaukee Compact • Surface is hardened and Magnetic Drill Press ground for accuracy • 110V, 9A, 450 RPM • Base swivels 360° 1 • Cuts up to 1 /2" diameter holes • 4" wide jaws through 2" steel with annular • Jaws open 4" cutters, or 1/2" diameter Reg. $157.99 1 KC-KMV4N holes, 4 /4" deep with twist drill bits 95 • 6.6" Drill travel $139 Reg. $1343.99 MILW-427021 Magnum Precision Save $104995 Tooling Vise $29 Save • 80mm wide jaws x 100mm opening $294 Reg. $138.99 MAG-VTP80 $10995 Magnum 24" Metal Magnum V-Blocks Brake • Sold in pairs 18 Gauge Capacity • Precision ground • 5 Removable fingers: Save • Great for setup of round materials 1", 2", 3", 8" & 10" $204 4" 6" • Includes counter weight Reg. $22.99 Reg. $34.99 for easier operation MAG-VB4 Save MAG-518004 Save Reg. $493.99 95 95 20% MAG-W15X610A $17 21% $27 $28995

Magnum 8" Shear Brake 2-In-1 Machine General 7" x 12" Metal • 8 " Cutting and bending width • 20 ga steel/18 ga aluminum capacity Reg. $209.99 Bandsaw MAG-2IN1610 Gearbox Eliminates the Need for Belt 95 Changes $139 • 120V, 1 HP, 3 Speed, 1PH • Horizontal or vertical cutting Save • Adjustable vise for angle cutting $70 • Fluid cooling system • Adjustable hydraulic downfeed control • 5 Year Limited Warranty Reg. $1469.99 GEN-90700M1 Magnum 3-In-1 Machine $129995 Save Brake, Roll & Shear $170 • 20 Gauge capacity • Press style box and pan brake 24" 30" Reg. $419.99 Reg. $524.99 MAG-3IN1610 Save MAG-3IN1760 Save $31995 $100 $39995 $125

Feb 2011 13 Welding INVENTORY BLOWOUT Sorry! No Rainchecks Selection Varies By Store Lowest Millermatic 140 Argon Cylinders Price Ever Auto-Set MIG Welder • Welds 24 gauge to 3/16" steel CuFt Reg Sale • Input 20A @ 115V, output 30-140A • Spatter free starts 55 bot-ar55 $229.99 $179.95 • Auto-temp shutdown • Simple heat and speed selection 80 bot-ar80 $249.99 $199.95 • 3 Year warranty • Includes MIG gun, 10' work cable 110 bot-ar110 $269.99 $219.95 with clamp, regulator/flow gauge, gas hose, and set-up & operation DVD Special One Time Only Reg. $779.99 Surplus Discount MEM-907335 $74995 Lincoln Electric Ranger

305G Gas Welder/ Feb 17th To 19th Generator 95 • Excellent DC multi-process welding $729 for general purpose stick, TIG, cored-wire, MIG and arc gouging • Input 300A @ 29V Save • Chopper Technology provides easy starts, a smooth arc, low spatter $50 and excellent bead appearance • Electric fuel pump avoids vapor lock and assures consistent fuel delivery • Onboard generator delivers 10,500 peak (9500 continuous) watts Miller Diversion 180 TIG of 120V/240V AC power • 100% Duty cycle @ 305 amps Welder • Kohler 23HP gas engine Dual Voltage • 12 Gallon fuel capacity • 180 amp AC/DC TIG welder welds aluminum, • 3 Year warranty mild steel and stainless steel, uses less Reg. $4499.99 LNC-K17265 power, and provides a consistant arc Save • Input 115V or 230V with included 95 $500 Miller Multi Voltage Plug $3999 • High frequency start, no tip contact required • Includes torch, regulator, foot control, TIG Welding for Dummies book, instructional DVD and more • Weighs only 50lbs • 3 Year warranty Reg. $1949.99 MEM-907460 $179995 Save $150

Miller Protective Cover Miller Big Window • Fits over a MIG 211 or smaller • Includes cutout for cables and Fixed Shade Helmet large pocket for storage • Inferno Reg. $54.99 • Fixed shade 10 MEM-195149 • See it all through the big 95 window $44 • Same shell and headgear as Miller Elite Reg. $79.99 Feb 17th To 19th MEM-235627 $5495 Save $3995 Save 27% 14 $25 Feb 2011 Welding INVENTORY BLOWOUT Miller Spectrum 375 Sorry! No Rainchecks Selection Varies By Store X-TREME Plasma Cutter Weldking CoolCut 30 X-Tremely Portable Plasma Plasma Cutter • Rated 3/8" mild steel at 10in/min Severs a maximum of 5/8", recommended • Input: 115V/230V MVP (multi- for use with material up to 3/8" voltage plug), 1PH • Inverter technology provides quick and • 35% Duty cycle clean cutting in a small, lightweight unit • Severs up to 5/8" @ 5 in/min • Includes 10' power cord and plug, 20' • Weighs only 18lbs Work cable with clamp, SG 55 Plasma • Includes torch and carrying case cutting torch with 16' cable, air filter and • 3 Year warranty Reg. $1599.99 regulator, spare tip and electrode MEM-907339 • 3 Year warranty Reg. $799.99 $139995 WK-07001800 $47995 Save $200 Save $320

Millermatic 212 Neiko 135A MIG Welder Includes Gas Regulator & Hose Auto-Set MIG Welder • Welds 22 gauge up to 3/16" mild steel • Welds 22 gauge to 3/8" steel and • 115V Input 14 gauge to 3/8" aluminum • 20% Duty cycle at 90 Amps • Input 27 amps @ 230V • Thermal overload protector • Infinite voltage control • Includes torch with 8" cable • Simple heat and speed selection Reg. $429.99 • 3 Year warranty RRT-10907A • Includes MIG gun, 10‘ work cable with clamp, gas regulator, set-up and operation DVD 95 Reg. $1799.99 $319 MEM-907405 $169995 Save $110 Feb 17th To 19th $164995 Save $150

Uniweld Argon Regulator Miller 30A Spool Gun Made in the USA 30' Cable • Adjustable flowrate in cu. ft/hour • Bottle pressure in psi and kpa • 200 amps @ 100% duty cycle Reg. $109.99 • .023 - 1/16" Wire diameter UNIW-RHFG1450 • Fits direct onto Miller 251 and 350P • For use with most CC/ 95 CV, DC power sources $79 Reg. $1299.99 MEM-130831 95 $1099 Save Save Feb 17th To 19th $30 95 $300 $999 Feb 2011 15 Welding INVENTORY BLOWOUT Sorry! No Rainchecks Selection Varies By Store Vaper Auto Darkening Watson Aluminized Save Welding Helmet Welding Gloves • Adjustable shade from Din# 9 - 13 • Aluminized heat shield 36% • 3.85" x 1.70" Viewing area • Full grain goatskin • Protects against IR and UV rays leather, double palm • Lightweight and thumb protector • Solar charged and 3V Lithium Reg. $35.99 batteries provide long life M WG-263GA9 Reg. $64.99 L WG-263GA10 TTN-41254 XL WG-263GA11 95 Save $2295 $49 23% Watson Aluminized Miller Auto Darkening Welding Mitt Save Welding Helmets • Aluminized heat shield 39% • Split cowhide palm & fingers Performance Series • Gauntlet style cuff "Blue Rage" Reg. $32.99 • Adjustable sensitivity & delay S WG-1034MA9 • Adjustable shade DIN #9-13 M WG-1034MA10 • Replaceable lens L WG-1034MA11 • Auto darkening Feb 17th To 19th XL WG-1034MA12 • 3 Sensors 95 • Auto on/off 95 $19 Reg. $299.99 MEM-2414158 $249 95 Save Miller Flame Resistant $269 $50 Elite Series Welding Jacket "Wicked" Lightweight • Adjustable shade • Durable cotton from DIN #8 - 13 Reg. $39.99 • 30% Larger window than M MEP-244750 normal welding helmets, 3 7 L MEP-244751 2 /8" x 3 /8" viewing area XL MEP-244752 • 4 Independent arc sensors XXL MEP-244753 • Includes helmet bag, 95 comfort cushion and $19 1/2 replacement lens covers Reg. $389.99 PRICE MEM-241464 Save Feb 17th To 19th $34995 $60 $329 95 Welding Blanket • Made of 18oz fire resistant fibreglass Watson Premium • 6' x 6' Sheet with grommets • Moldable Welding Gloves Reg. $72.99 • Full grain deerskin palm and SI-W6X6X18 foam lined split cowhide back 95 • Gunn cut, wing thumb $49 Reg. $22.99 Save M WG-2752M L WG-2752L Feb 17th To 19th $23 XL WG-2752XL 95 95 $17 Save Watson Welding Apron $19 21% • Rugged and durable split S WG-2755s cowhide leather Watson Tigger M WG-2755M • Kevlar thread L WG-2755L stitching XL WG-2755XL • 23.5" x 40" Welding Gloves Reg. $32.99 • Deer skin WG-3 • Kevlar stitched 49 Reg. $13.99 $16 1/2 $995 PRICE Save

16 Feb 2011 28% Welding INVENTORY BLOWOUT Strong Hand Magnetic Sorry! No Rainchecks Selection Varies By Store Tab Holder Oxy/Acet Medium A Must Have For Every Welder's Tool Box • Holds tabs parellel Duty Torch Set or perpendicular to • 10 CuFt Acetylene tank the substructure • 20 CuFt Oxygen tank • Adjusts for different • Includes hose, regulators, shapes: round, flat or welding & cutting angled metal surfaces attachments • Great time saver and carry case Reg. $14.99 Reg. $449.99 STH-MFT10 UNIW-TI350T 95 $12 $34995 Save Strong Hand 18" Flexible $100

Snake Magnet Feb 17th To 19th • 2 Magnets Anti Spatter Jelly connected by 95 a flexible cable $14 To Prolong Consumable Life • 13lbs of pull • Stops spatter build up • Convenient holding in nozzle and on tip of flat plates and Save Reg. $6.99 small tubes 25% WA-ZC16 • Includes spring clamp 95 Save Reg. $19.99 $4 STH-MFC318 29% $1695 Strong Hand Sliding Strong Hand 12" J-Clamp Arm F-Clamps Most Versatile Most Versatile Sliding Arm Sliding Arm Clamp Clamp On The Market On The Market! • Heavy duty Reg. $99.99 4" x 3.25" 8" x 3.25" STH-UM125J Reg. $14.99 Reg. $18.99 STH-UD45 STH-UD85 $5995 Save $1295 $1595 $40 Welding C-Clamps Neiko Tools Locking • Copper coated screw to prevent spatter "C" Clamps from Save • An essential for every sticking up to welder's toolbox 29% $495 2" 3" 4" 6" Reg. $6.99 Reg. $7.99 Reg. $9.99 Reg. $13.99 Save RRT-00435A RRT-00436A RRT-00437A RRT-00438A 6" 11" up to 95 95 95 95 Reg. $8.99 Reg. $9.99 50% $4 $5 $7 $9 RRT-00413 R RT-00411 Neiko 3pc Locking Welding Neiko Tools 11" Locking Clamp Set Save • Includes one 11" Feb 17th To 19th "C" Clamp With Pad locking C clamp and 28% • An essential for every welder's toolbox 95 Reg. $9.99 2 welding clamps RRT-00419 Reg. $20.99 $14 RRT-00416 $495 1/2 $1795 PRICE

Feb 2011 17 Welding INVENTORY BLOWOUT Sorry! No Rainchecks Selection Varies By Store Vaper MIG Welding Pliers • Ergonomic insulated grip Century 50' 250V • Many uses including: Wire cutter, nozzle reamer, tip pliers, nozzle Welders Extension Cord pliers, chipping hammer and • Heavy duty 8/3 wire needle nose pliers • 50 amp molded rubber welding plugs Reg. $15.99 • Tough water and fire resistant cover T T N-11448 Save Reg. $169.99 95 25% CWC-D13388050 Save $11 $9995 $70 Magnum MIG Welder and Gas Cylinder Sloped Cart Solid Versitile Cart • Holds Miller 180 & plasma cutters easily • Gas cylinder held Save firmly with chain • Swivel front $30 wheels Lincoln Premium Wire, • Front handle for easy handling Reg. $109.99 12.5lb Spools MAG-TC0732 Feb 17th To 19th • ER70S-6 95 • Easy to run, wide voltage range $89 95 • Handles mill scale $79 • Excellent bead formation and splatter control $2695 Save Trigger Start up to Micro Torch 40% • Precision flame for .030 detailed applications Reg. $44.99 • Lock button for hands free use LNC-ED561111 • Adjustable flame control Reg. $32.99 BER-2880116 Save .035 Reg. $42.99 95 21% LNC-ED561117 $25 Trigger Start Lincoln 1/8" Welding Rod • 11 lbs Gas Torch Kit Reg. $29.99 Operates on MAPP Gas or Propane LNC-ED511017 Save • Great for soldering, brazing, thawing 95 • Swirl action provides a hotter, $22 23% more efficient flame • Lock button • Cast aluminum body • Includes one "Fat Boy" Propylene fuel cylinder Reg. $55.99 BER-2880089 $4495 Save $11 Weller 900o Battery Welding Kit Save Feb 17th To 19th Soldering Iron • Portable cutting $15 • 15 Seconds to heat-up and welding kit 95 • Heats up to 900º F • Great for small projects $59 • Easily replaced batteries • Disposable propylene Reg. $21.99 and oxygen tanks WEL-BP6 45MP • Includes mild 95 steel rods Reg. $74.99 $9 BER-2880549 1/2 $6495 PRIC 18 E Feb 2011 Airtools INVENTORY BLOWOUT Sorry! No Rainchecks Selection Varies By Store DeVilbiss "Finishline" Sata Spray Guns HVLP Spray Gun • Includes 1.3mm, Jet 3000B HVLP 1.5mm & 1.8mm tips • 1.3mm Tip • Great for oil based and • Great for base/clear paints waterborne paints • Built-in digital regulator • Rugged anodized body • Use for waterborne and Reg. $249.99 solvent based paints DV-803060 Feb 17th To 19th Reg. $849.99 Save SATA-119164 95 95 Save $199 $70 $179 $59995 $250 Vaper HVLP Minijet 3000B HVLP Spray Gun Reg. $439.99 Save • Includes 1.4mm tip, plastic SATA-125666 paint cup and pressure 95 $140 regulator with gauge $299 • Excellent for spraying base/clear automotive Jet 100BF HVLP paints as well as some • 1.4mm Tip stains and lacquers • High quality stainless Reg. $54.99 steel construction TTN-19000 Save • Excellent transfer efficiency 95 $15 Reg. $399.99 $39 SATA-146399 Save Hobby Airbrush Set $29995 $100 Great for Beginners Jet 100BF RP • Spray Pattern: 3/4" - 2" Feb 17th To 19th • 1.8mm Tip, excellent • Single-action, external mix for primer • Includes hose, propel 95 Reg. $329.99 regulator, and $9 SATA-146167 Save a 1/4" NPT 95 $80 adaptor $249 Reg. $14.99 Save RRT-31201 33% $1295 Bynford Syphon Feed Spray Gun Devilbiss Style • 1.8mm Tip FREE • Excellent for primers, latex "22 Airbrush Lessons" Book and other thick materials PAA-TTALB • Superior finish compared to other economy spray guns With Purchase of Any Airbrush Reg. $43.99 While Quantities Last BYN-SGSD 1/2 95 P Iwata 10' Airbrush Hose $19 RICE Premium Quality • Nylon covered DeVilbiss Dessicant Hose • Fits all Iwata airbrushes • Effective with both HVLP and Reg. $29.99 conventional spray equipment Save IWA-BT010 • Dries compressed air in the air line Reg. $38.99 61% $2495 DV-130502 $1495 Polyair Hoses With • 3/8" x 100' 1/4NPT Reusable Ends Reg. $71.99 • High quality PVC GLS-38100RHE • Lightweight and non-marking 95 Jet 1/3 Sheet Orbital • Temperature range: $59 Save -26°C to +65°C up to Air Sander Reg. $60.99 • 3/16" Stroke GLS-38100 $12 • 7,000 RPM 95 Reg. $150.99 $49 JET-403307 $4995 Save $100 Feb 2011 19 Airtools INVENTORY BLOWOUT Sorry! No Rainchecks Selection Varies By Store Ingersoll Rand Super Duty Hutchins "Hustler" Save 1/2" Impact Board Sander $135 • 780 ft/lbs of torque • 2-Cylinder, common piston system Made • Built-in muffler, extremely quiet virtually eliminates jumping in USA • Best power to weight ratio in its class! • Double rack and pinion gear • Titanium/composite body weighs only 3.95lbs assemblies give twice normal • Handle exhaust gear contact for increased prevents blow back Feb 17th To 19th power and balance Reg. $439.99 Reg. $384.99 IR-2135QTIMAX Save HUT-2000 $329 95 $24995 $34995 $110 Ingersoll Rand Air Dynabrade 6" Reciprocating Saw Made Professional Quality "Silver Supreme" in USA • 5750 SPM • Lock off throttle Random Orbit Sander • Rear exhaust • 3/16" Orbit • Great for cutting • Heavy duty metal body sheet metal and with rubberized grip body panels • 1/4" Stroke Feb 17th To 19th • Wrist support enhances Reg. $159.99 operator control while IR-429 protecting hand from exhaust Save 95 Reg. $239.99 95 $60 $99 DYN-69025 Save $119 $14995 $90 Chicago Pneumatic 1/2" Impact Bynford Air • 425 ft/Ibs of torque • Handle exhaust Reciprocating Saw prevents blow back • Cut bolts, muffler clamps, • Rubber grip Reg. $169.99 sheet metal, etc CP-734H • Comfortable insulated Save rubberized grip 95 Reg. $54.99 $129 $40 BYN-ABS 95 1/2 $24 PRICE Chicago Pneumatic 1/4" Anlge Die Grinder Ingersoll Rand 3/8" • Great for confined areas Save • Compact, lightweight • Precision machined $20 Titanium "Max" Impact gearing for • 300 ft/lbs of torque maximum • Easy push button power transfer forward and reverse • Self-locking • Titanium/composite throttle body less than 6" long Reg. $109.99 • Weighs only 3lbs CP-875 • Handle exhaust 95 prevents blow back Save $89 Reg. $384.99 IR-2115TIMAX $135 Straight Model 95 95 Reg. $99.99 $249 CP-872 $79 Ingersoll Rand Save Chicago Pneumatic Long 1/4" Air Ratchet $100 Barrel Air Hammer • 30 ft/lbs of torque Heavy Duty • 300 RPM with vairable speed control • 2100 BPM • Compact body to help get into hard to reach areas • Great for Reg. $219.99 front end & IR-1105MA XD2 exhaust work 95 Reg. $109.99 $119 CP-7150 95 Feb 17th To 19th Save $89 95 $30 20 Feb 2011 $79 Airtools INVENTORY BLOWOUT Sorry! No Rainchecks Selection Varies By Store Mechanics 17pc Air 1 Accessory Kit Nikle 1 /2" Palm • Includes blow gun with 4 nozzles, inflation needle, Nailer With 120 PSI air gauge, dual head tire chuck, power wire 1 1 brush, 2 couplers, 2 /4"NPT female nipples, 2 /4" 1 NPT male nipples and 2 /4" NPT Magazine universal adapters • Drives 34° framing nails Reg. $21.99 Save Feb 17th To 19th • Ideal for nailing WIL-M611 metal connectors 95 32% 95 and joist hangers $14 Reg. $296.99 $17 NIKL-AN7 $5995 Save $237 Rotek 13/8" 23 Ga Headless Pin Nailer 3 Mechanics 3" Save • Drives 1/2" - 1 /8" pins 1/2 • Almost invisible, PRI 28% no filling required CE Air Cut-Off Tool • Includes case • 20,000 RPM Reg. $197.99 • Great for cutting many types of sheet metal, ROT-RPN0635 fiberglass, bolts, muffler clamps, etc. 95 • Includes metal blade guard $98 Reg. $27.99 WIL-M563DB 95 $19 Reg. $19.99 Divergent Narrow L179 Crown Staples $595 Legs Split For Superior Mechanics 6" Dual Hold Strength 7 • 1 /8" Action Air Sander • 5200/ Box Save • 8000RPM • Made in Italy 70% • For body work and paint preparation • Built-in air regulator Reg. $38.99 WIL-M568DB Mechanics Syphon Feed $2995 Save Sandblast Kit 23% • Removes paint, rust, scale and other materials • Includes Norgren Dessicant Filters rubber hose, • 10 SCFM Capacity pick-up tool and extra nozzles • Excellent for removing water from your Reg. $32.99 air lines for painting or plasma cutting WIL-M570C 95 1/2 $129 $1595 P Save RICE up to 1/4" $50 Feb 17th To 19th Tire Inflator With Gauge Reg. $149.99 95 • 180 PSI NG-W74D2ANNPN $109 • Quick and easy way to 3/8" fill your tire Reg. $159.99 • 14" Flexible NG-W74D3ANNPN hose with locking head Reg. $16.99 Norgren Dessicant Bag RRT-30227 • 0.24Lb 95 • Refill for Dissicant Filters $9 Reg. $19.95 NG-400706 Save 95 41% $16 Feb 2011 21 Compressors INVENTORY BLOWOUT Sorry! No Rainchecks Selection Varies By Store Rolair "Hot Dog" Hitachi Twin Stack Compressor • Quiet Running, Low RPM Compressor • 2.6 CFM @ 100 PSI • 3 CFM @ 90 PSI • 2.5 Gallon tank • Twin 2 gallon tanks • Oil lubricated pump • Oil lubricated, Reg. $249.99 cast iron pump ROL-FC1250LS3 • Lightweight design 95 Reg. $279.99 $219 Feb 17th To 19th HIT-EC89 Save Save $16495 $115 $20995 $40 DeWalt Brad Nailer Makita Twin Stack & Compressor Kit Save Compressor • Includes 2" 18 ga brad nailer, Quiet Running, Low RPM Trim Boss compressor $100 • 4.2 CFM @ 90 PSI (0.75CFM @ 90PSI), • Twin 2 gallon tanks Save hose and • Oil lubricated pump fittings • 2 Outlets $20 Reg. $309.99 Reg. $349.99 DEW-D55140BNC MAK-MAC2400 $19995 $34995 Feb 17th To 19th $329 95 Porter Cable Brad Nailer Makita Contractor's & Compressor Kit Compressor • Includes 2" 18 ga brad nailer, pancake • 6.5 CFM @ 90 PSI compressor 150PSI (2.6 CFM @ • 5.2 Gallon tank 90PSI), hose and fittings • Powers two Save Reg. $269.99 framing nailers PC-CF6121 simultaneously $30 95 Reg. $429.99 $199 Save MAK-MAC5200 $70 $41995 Feb 17th To 19th $39995 Rolair "Pioneer" Style Compressor Campbell Hausfeld • 4 CFM @ 100 PSI Compressor • 5.3 Gallon tank • 5.7 CFM @ 90 PSI • Oil lubricated pump with • 20 Gallon tank cast iron cylinder • 110V/240V Motor Reg. $329.99 ROL-FC2002HBP6 • Oil lubricated, cast iron pump 95 Reg. $599.99 $249 Save CH-VT6183 $80 $54995 Save $50 Numatics 1/4" Electronic Rolair Wheelbarrow Compressor Save Timed Drain Valve • 6.9 CFM @ 100 PSI • Two adjustments: Frequency • Twin 9 gallon tank $200 of drain and duration • Start/stop or Reg. $199.99 constant run settings NUM-SC82615408 • 110V, low RPM motor 95 • Heavy duty cast iron $149 Italian made pump • Flat free tire Reg. $1099.99 Save ROL-5715K17DC3 $50 $89995 22 Feb 2011 Compressors INVENTORY BLOWOUT Sorry! No Rainchecks Selection Varies By Store RapidAir Compressor 6HP Compressor Plumbing Kit • 10.3 CFM @ 90 PSI A Fast and Easy Way to • 60 Gallon tank Plumb in Your Compressor! • 230V, 1PH motor Save • Includes 100' nylon tubing, two air outlet • Oil lubricated, $70 manifolds with drip Save cast iron pump legs and a selection Reg. $699.99 $70 CH-VT6275 of push fittings Feb 17th To 19th Reg. $199.99 95 RAP-90500 Individual parts $649 95 95 and accessories $629 $129 available 5HP Compressor Speedaire 5HP • 16 CFM @ 90 PSI Heavy Duty • 60 Gallon tank • 230V, 1PH motor Save Compressor • Oil lubricated, • 17.1 CFM @ 175 PSI cast iron pump $200 • 80 Gallon tank Reg. $1249.99 CH-TQ3101 • Oil lubricated pump • 80% Duty cycle Save 95 Feb 17th To 19th • 3 Phase $1099 Reg. $2099.99 $600 $104995 GRA-5Z399 $149995 5HP 1PH Motor Speedaire 13HP Gas Compressors CH-CE7050 3 Year Warranty 3PH Motor Compressor With Magnetic Switch CH-CE7051 Honda Engine • 17.1 CFM @ 175 PSI • 25.1 CFM @ 175 PSI • 80 Gallon tank • 30 Gallon tank • Electric start Save • 230V Reg. $2999.99 • Oil lubricated, 2 stage GRA-13H30 cast iron pump $600 Reg. $2099.99 $239995 $199995 Feb 17th To 19th DeVair 10HP Super Duty Save $194995 Compressor Save $150 • 30 CFM @ 175 PSI • 120 Gallon tank $800 Below • 3 Phase Cost 7.5HP • Heavy duty, pressure lubricated, cast iron, Compressors Canadian made pump • Heavy duty, American With Magnetic Switch made, Baldor motor • 80 Gallon tank 1PH Motor • 100% Duty cycle • Oil lubricated, 2 stage • 23.7 CFM @ 175 PSI Reg. $3499.99 cast iron pump CH-CE7000 DEVA-IS10230 Reg. $2299.99 95 95 Save 3PH Motor $2699 $2199 • 23.7 CFM @ 90 PSI $100 CH-CE7001 Ingersoll Rand 15HP Save $2000 15HP Compressor Save Rotary Screw 3 Year Warranty $200 $1000 • 54.4 CFM @ 175 PSI Compressor Price Drop • 120 Gallon tank • 50 CFM @150 PSI • 208-230/460V, • 120 Gallon tank 3PH motor • 200V, 3PH • Oil lubricated, • 100% Duty cycle Special Order in 2 stage cast • Includes Some Locations iron pump refrigerated dryer Reg. $3999.99 Reg. $10999.99 CH-CE8002 IR-UP615CTAS200 95 95 $3799 Feb 2011 $8999 Available in 5 - 50HP 23 Nailers INVENTORY BLOWOUT Sorry! No Rainchecks Selection Varies By Store 3 3 Bynford 1 /8" 23 Ga Max 1 /4" Roofing Headless Pin Nailer Coil Nailer • Comfortable rubber grip 3 • Includes case • Drives 3/4" - 1 /4" roofing nails Reg. $65.99 • Adjustable depth control BYN-FNP2335 • Rapid fire trigger valve • Lightweight, only 5.2lbs 95 • Tar resistant nose $49 Reg. $399.99 Feb 17th To 19th MAX-CN445R Save Save $29995 $100 $26 $3995 ITC 2" Flooring Cleat Nailer Makita 2" 18 Ga • Includes mallet and case Reg. $219.99 ITC-013145 Brad Nailer Save • Drives 5/8" - 2" brad 95 nails $159 $60 • Tool-free adjustable ITC 2" Flooring depth and jam release Stapler • Nail reload indicator • Includes mallet and case • Includes case Reg. $219.99 Reg. $119.99 ITC-013245 MAK-AF5051 Save $15995 $9995 $20 28o Framing Nailers Hitachi 2" 18 Ga Bynford ITC Brad Nailer 1 Reg. $129.95 Save 2" - 3 /2" XX-ITC-013136 5 Year Warranty Reg. $139.99 95 $40 • Drives 5/8" - 2" brad nails BYN-FNS28 $89 • Tool-free depth adjustment 95 and jam release $89 • Reload indicator • Non-marring tip Reg. $139.99 HIT-NT50AE2 Feb 17th To 19th Save 95 Save $50 $119 $9995 $40 1 King Canada 2" 23 Ga Hitachi 2 /2" 15 Ga Finish Nailer Headless Pin Nailer 5 Year Warranty 1 Great for all kinds of • Drives 1" - 2 /2" nails finishing applications • Tool-free depth adjustment • Drives 1/2" - 2" headless pins and jam release • Almost invisible, • Built-in blow gun no filling required • Non-marring tip Reg. $109.99 • Includes safety KC-8251PN glasses and case 95 Save Reg. $289.99 $79 HIT-NT65MA4 Save $30 $22995 $60 1 1 o Bosch 1 /2" 18 Ga Max 3 /4" 28 Narrow Crown Stapler Framing Nailer • Tool-less depth adjustment and jam release • Dry fire lockout Compact design, 1 • Narrow nose only 12 /4" tall 1 • Non-marring tip • Drives 2" - 3 /4" nails at 28° Reg. $219.99 • Open nose for easy jam clearing BOB-STN15018 • Adjustable depth control 95 • Bump fire/single fire trigger $129 Reg. $379.99 MAX-SN883CH28 Feb 17th To 19th Save 95 Save $90 $329 95 24 Feb 2011 $70 $309 Construction INVENTORY BLOWOUT Magnum Portable Sorry! No Rainchecks Selection Varies By Store Century 12/3 x 10' Cement Mixer 1/2 • 1/3 HP Triple Tap Cord 110V Motor PRICE 1 • -40° Coldweather jacket • 3 /2 cu/ft • 1520 RPM • Water & flame resistant • Lighted ends • 15" Drum opening Reg. $32.99 Reg. $319.99 CWC-D19003661 MAG-CM35 95 $1495 $289 Save $30 Goldblatt 15" Drywall King Canada Drywall Panel Saw Save • 15" Blade Panel Lifter • Comfortable soft grip handle 66% • Hangs drywall in Compare at $14.99 sizes up to 4' x 16' XX-GB-G15803 on any ceiling or 95 wall up to 11' high $4 • Cradle tilts to allow the operator to load and operate lift alone Reg. $209.99 KC-K DL11 Century 50' Triple Tap 95 Save $189 $20 Extension Cord • Flexible blue outer jacket stays supple in cold weather and is water & flame resistant • 14/3 Wire • Lit neon ends Bullet Siding & Compare at $59.99 XX-CW-D19003658 Flooring Shear Feb 17th To 19th 95 Dust Free Cutting $29 • 9" Cut width 95 • Cuts Hardie Board siding or up to $189 1/2 5/8" thick laminate flooring PRIC • Shear blade will E outlast 20 saw Save blade sharpenings Reg. $219.99 $30 Magnum 8' BLT-EZ9 Save $19995 Fibreglass Step Ladder $28 Hardwood Floor • Type 1A industrial heavy duty • 300lb Rating Reg. $127.99 Installation Clamp MAG-LSF8T1A • Helps to keep rows of 95 hardwood floor tight $99 when installing 24' Fibreglass Extension Reg. $15.99 95 STG-18110 Ladder available $179 Save MAG-LEF24T1A 95 37% $9 Irwin 10 Pocket Qwik Lok Locking Carpenter's Apron Extension Cord Connector • Oversized center pocket • Dual hammer holders Save • 120V, 15 amp • Reinforced points of wear • Eliminates the Feb 17th To 19th • Integrated nylon belt 65% frustration of Compare at $19.99 extension cord 95 XX-IRW-4031033 disconnections $17 95 and frayed $6 dangerous ends Reg. $22.99 Save QL-10100 95 21% $19 Feb 2011 25 Construction INVENTORY BLOWOUT Sorry! No Rainchecks Selection Varies By Store Bosch Dual Plane Makita Heavy Duty Save Laser Level • Accurate to 1/4" over 100 feet Tool Belt $30 • Vertical, horizontal • Large pouches with multiple pockets on both & cross line modes sides which can be adjusted for position • Projects two lines • D-ring holster for hammer for level and/or • Fits waist sizes plumb applications 37" to 50" • 160º Vertical Compare at $59.99 fan angle XX-MAK-845018X Reg. $339.99 95 BOB-GLL250 Save $29 $29995 $40 Zircon 3/4" Studsensor Bosch Digital • Locates the edges of wood or metal studs up to 3/4 inch deep Rangefinder • Red LEDs light up every time a stud edge is approached A Must Have For Real • The pointing system shines Estate Agents! a beam of light on the wall • Range 2 inches to 230 feet to identify the target • Accurate to 1/16" Reg. $22.99 Save • Measures length, ZIR-62264 area or volume Save 95 34% Reg. $219.99 $14 BOB-GLR225 $20 $19995 MaxWood Multi Laser Level • Easy to use adjustable laser level does point, horizontal line, verticle line, and cross hair Estwing 16oz Smooth • LED light for low light conditions • Includes battery and Face Ripping Hammer adjustable tripod • Designed for comfort and • Great for many home applications excellent durability • Height: 6" Reg. $31.99 Reg. $10.99 EST-E316S MW-5118 Save $395 63% $2495 Save 22% Stanley 16oz Rip Full Line of Estwing Claw Hammer Striking Tools Available • Fibreglass handle • Heat treated and rim tempered for Stanley Heavy Duty durability and safety Reg. $17.99 Hammer Tacker ST-51622 Save Feb 17th To 19th 95 28% Professional Grade $12 • Loads 2 strips of staples 95 • Uses Stanley TRA series $24 or Arrow T-50 staples Astro 1/4" Geared • 1/4", 5/16" & 3/8" Capacity Save Save Reg. $32.99 Hand Riveter ST-PHT150C 24% • Short handle with double compound 60% 95 hinges maximizes leverage $27 • Includes 5 nosepieces: 1/8", 5/32", 3/16", and 2 x 1/4" Full line of staples available Reg. $49.99 AP-1423 95 Kuny's Electrical & $19 Maintenance Tool Bag • 17"H x 8"L x 8"W Stabila 2pc Level Set • Box shaped design to prevent tipping 120 Year Anniversary - Black Edition with 28 separate pockets • 2 Level set, 78" & 32" Reg. $54.99 • Accuracy certified, KUN-EL748 top and bottom reading 95 • Strong, wide frame design $44 • Removable rubber end caps for flush measuring Save Compare at $239.99 Feb 17th To 19th XX-STAB-37170 27% 95 95 26 $149 Feb 2011 $39 Construction INVENTORY BLOWOUT Sorry! No Rainchecks Selection Varies By Store 7'' Heavy Duty Irwin Retractable Save Utility Knife Speed Square 41% • Heavy duty aluminum Includes 5 Blades construction will not • Quick change blade removal Save rust or corrode without opening the knife Compare at $12.99 61% • Instruction manual XX-IRW-2082200 included with complete 95 rafter tables $4 Reg. $16.99 EMP-2999 $995 Nicholson Tape Measure • 3/4" X 16' SAE & Metric Compare at $6.99 Professional 48" XX-NIC-NY1035ME Drywall T-Square $295 1/2 • Anodized aluminum finish • Large, bold numbers and graduations PRICE • Permanently fixed riveted 3/16" blade & head joint Reg. $24.99 Save EMP-41848 28% Starrett Tape Measure 95 • 3/4" x 25' Made $17 • Bright red impact resistant case in USA • High carbon heat treated blade Compare at $8.99 XX-STAR-65403 $449 48" Box Beam Level 1/2 • Aluminum Box Construction PRICE • 3 Vials • Rubber bump ends • Large hand grips Reg. $44.99 Save EMP-84548 Starrett Quick Change 95 33% Utility Knife $29 • Die cast metal case • Heavy duty blades • Locks in 3 positions Save • Quick release blade storage compartment in handle 60% Compare at $4.99 16" x 24" Carpenters XX-STAR-SO14 Square $199 • High visibility, deep stamped, long lasting graduations • Anodized aluminum • 1/8 Thick Starrett 48" Laminated • Includes 1/8", 1/10", 1/12", 1/16" stamped graduations Hardwood Level and conversion tables • Brass bound edges Save Reg. $24.99 • Unbreakable block vial system EMP-E1190 • Accurate machined 360° vials 60% Compare at $49.95 95 Save Feb 17th To 19th XX-STAR-LBCBB48 $19 Made 28% $1795 $1995 in USA

9" Torpedo level Irwin Laser Line Level • Heavy duty aluminum frame • Precise to 3/16" at 20' Reg. $16.99 • Rotates 360° 1/2 EMP-EM819 Feb 17th To 19th • 120' Work area 95 Save • Dual bubbles vials PRICE $12 95 for level or 41% $9 perpendicular layout Compare at $19.99 XX-IRW-6041101 95 Feb 2011 $9 27 Powertools INVENTORY BLOWOUT Sorry! No Rainchecks Selection Varies By Store Milwaukee 18V Li-Ion DeWalt 18V Compact Kits 2pc Combo Kit • Include 2 batteries, charger and case Compact Series • Includes 1/2" drill 1/2" 1/4" Hex (400 in/lbs), Save Cordless Drill Impact Driver impact driver XX-DEW-DC759KA XX-DEW-DW056KS (1400 in/lbs), $50 two batteries, charger & case Save Reg. $299.99 Feb 17th To 19th MILW-269122 $60 95 95 Compare at $199.99 $259 $249 95 $139 /ea Milwaukee 18V Li-Ion 2pc Combo Kit • Includes 1/2" hammer Heavy Duty 18V Li-Ion 1/2" drill/driver (650in/lbs), 1/4" impact driver Hammer Drill/Drivers (1400in/lbs), Save • Include 2 batteries and charger, no case two batteries, charger and case $110 Reg. $479.99 Reg. $379.99 Reg. $369.99 MILW-261124 BOB-1761801 Save Feb 17th To 19th up to MAK-BHP454 $37995 $140 $36995 Milwaukee 18V Li-Ion 95 All On Sale Save $239 /ea "Tool Only" up to Many Others to Choose From $70 Jig Saw Circular Saw Reg. $149.99 Reg. $139.99 BEST MILW-264520 MILW-263020 Bosch 18V Li-Ion 95 95 2pc Combo Kit VALUE $119 $109 Compact Tough Series • Includes 1/2" drill (452 in/lbs), impact driver (1280 in/lbs), two batteries, 1/4" Hex charger and bag Reg. $399.99 Impact 1/2" Impact BOB-CLPK23180 Reg. $139.99 Save MILW-265020 Reg. $199.99 95 MILW-266220 $229 $170 $10995 $15995

1 Bosch 18V "Tool Only" 4 /2" Angle Grinder 1 Reg. $149.99 1/4" Hex 6 /2" MILW-268020 Impact Driver Circular Saw 95 Reg. $219.99 Reg. $209.99 $119 BOB-25618B Below BOB-CCS180B Cost DeWalt 18V Li-Ion XRP 95 /ea 2pc Combo Kit $99 • Includes 1/2" hammer drill/driver (450 unit watts out), 1/4" 1/2 impact driver (1330 in/lbs), two batteries, charger and bag PRICE Reg. $479.99 DEW-DCK275L Li-Ion Reciprocating Saw 95 Reg. $219.99 $369 BOB-CRS180B Save 95 Sorry! No $99 1/2 Rainchecks $110 28 PRICE Feb 2011 Powertools INVENTORY BLOWOUT Makita 18V Li-Ion Sorry! No Rainchecks Selection Varies By Store 2pc Combo Kit Porter Cable 2pc Below Compact Series 18V Combo Kit Cost • Includes 1/2" drill • Includes 1/2" drill/driver Save 1 (340 in/lbs), impact (440 in/lbs), 6 /2" driver (1280 in/lbs), $90 circular saw, two batteries, 2 batteries charger and case and charger Reg. $369.99 Feb 17th To 19th Compare at $229.99 MAK-LCT200S XX-PC-PC218C2 95 95 95 $299 $279 $99 Save Makita 18V Li-Ion $130 2pc Combo Kit • Includes 1/2" All hammer drill/driver (560in/lbs), 1/4" impact driver Save (1280in/lbs), two Cordless Tools batteries, charger $110 and case at or below cost Reg. $479.99 MAK-LXT218 Feb 17th To 19th 95 • Drills $379 $36995 • Impacts Save • Combo Kits Makita 18V Li-Ion up to • Tool Only "Tool Only" All On Sale $120 Many Others to Choose From 1 6 /2" Circular Saw Jig Saw Reg. $159.99 Reg. $249.99 MAK-BSS611Z MAK-BJV180Z $9995 $12995 Such as:

1 Hitachi 18V Li-Ion 2pc 4 /2" Grinder Reg. $139.99 Combo Kit MAK-BGA452Z Reg. $429.99 HIT-KC18DDL Save $9995 $30995 $120 1/4" Recip Saw Milwaukee Reg. $159.99 Impact MAK-BJR182Z 18V 1/4" Hex Driver 95 Reg. $189.99 $99 MAK-BTD141Z Impact Driver • 1500 in/lbs of Torque 95 • Includes 2 full-sized li-ion $99 batteries, charger and case Reg. $419.99 MILW-265022 Save DeWalt 18V "Tool Only" 95 All On Sale XRP $219 $200 Many Others to Choose From Makita 18V Li-Ion 1/4" Impact Driver Battery Pack DEW-DC825B • 3ah 1 Reg. $119.99 4 /2" Angle MAK-1942053 Save Grinder 95 $40 DEW-DC411B Reg. $144.99 $79 1 6 /2" Save 95 up to $109 /ea Many Other Brands of Individual Circular Saw Batteries Also Available DEW-DC390B $90 Feb 2011 29 Powertools INVENTORY BLOWOUT Sorry! No Rainchecks Selection Varies By Store Makita 3/8" Drill Keyless Chuck DeWalt 1/2" Drill • 4 amp Motor • 7.8 amp Motor, • 0-3000 RPM 850 RPM • Includes case • Variable speed, Reg. $69.99 MAK-6413K reversible Feb 17th To 19th • Double gear reduction 95 • Metal gear housing $59 95 Reg. $149.99 $54 DEW-DW235G Save $9995 $50 Milwaukee 13pc Hole Saw Kit Ice Hardened Technology • General purpose 1 Bosch Drywall • 3/4" - 2 /2" Reg. $129.99 MILW-49224025 Save Screw Gun 95 • 7 amp Motor $79 $50 • 0-4,500 RPM • Metal gear housing • Lock-on button Compare at $139.99 Bosch 3pc 6" DareDevil XX-BOB-SG45M Save 95 Spade Bit Set 1/2 $44 $95 • 1/2", 3/4" and 1" PRICE • Self-feeding tip • Contorted spade for better chip clearing 3 Reg. $11.99 Hitachi 1 /16" SDS Plus BOA-DSB5003 Rotary Hammer Drill $595 • 7.4 amp Motor, 0-850 RPM • 3.9 ft/lbs of impact energy Below Bosch 5/8" SDS-Plus 1/2 • 3 Modes: rotation only, rotary Cost hammer & chipping Rotary Hammer PRICE Reg. $629.99 HIT-DH30PC2 • 4.8 amp Motor, 0-1700 RPM, 4400 BPM • 1.4 ft/lbs of 95 impact energy $399 • 2 Modes: Save rotation only & rotary hammer $230 Reg. $219.99 BOB-11258VSR Feb 17th To 19th 9 95 Hitachi 1 /16" SDS-Max $119 $10995 Rotary Hammer Drill Bosch 1" SDS-Plus Fastest Drilling Speed In Its Class • 9.2 amp Motor, 480 RPM, 2650 BPM Rotary Hammer Drills • 7.4 ft/lbs of impact energy • 7.2 amp Motor • Variable speed • 1300 RPM, 5800 BPM • Heavy duty aluminum 95 housing • 2.2 ft/lbs of impact energy /ea • 3 Modes: rotation only, rotary $219 Reg. $749.99 hammer & chipping HIT-DH40MR 95 Pistol Grip $469 Reg. $339.99 Save BOB-11253VSR $280 Save D-Handle up to Reg. $349.99 All BOB-11255VSR $130 Instock Bosch SDS Drill Bit Sets 7pc SDS+ / SDS-Max • Kit features high quality S4 carbide tipped bits, 3/16 - 1/2" Hammer Drills • Includes heavy duty case Reg. $49.99 BOA-HCK001 5pc AT COST 95 Reg. $34.99 $34 BOA-HCK005 30 Feb 2011 $2495 Powertools INVENTORY BLOWOUT 1 Sorry! No Rainchecks Selection Varies By Store Milwaukee 7 /4" 1 Circular Saw DeWalt 7 /4" Save • 15 amp Motor $50 Compare at $199.99 Circular Saw XX-MILW-639020 • 15 amp Motor 95 • 56° Bevel capacity $119 • Electric brake • Composite base Feb 17th To 19th Reg. $179.99 1/2 DEW-DW369CSK PRICE $9995 $12995

Freud Demo Demon 1 1 4 7 /4" 24T SawBlade DeWalt 7 / " 24 Tooth Last Up To 6 Times Longer Framing Saw Blade • New Lock-Tooth design and • Used for framing & ripping Dura-Blend TiCo carbide • Special vent design reduces Save Reg. $18.99 FRE-D0724DA heat and prevents warping Reg. $9.99 40% $1695 DEW-DW3578B10EA Feb 17th To 19th $595 $1595

Milwaukee Feb 17th To 19th Milwaukee Reciprocating Saw Blades Reciprocating Saw 95 6" 9" • 12 amp Motor $109 Reg. $3.95 Reg. $5.95 1 • 1 /8" Stroke, 0-3000 SPM MILW-48017021 (5/8 TPI) MILW-48017026 (5/8 TPI) MILW-48017782 (14 TPI) MILW-48017706 (8 TPI) • Gear protecting clutch Save MILW-48017784 (18 TPI) MILW-48017713 (10 TPI) • Counter weighted for reduced vibration MILW-48017787 (14 TPI) • Quick blade change $30 95 MILW-48017788 (18 TPI) $2 49 $4 Save 12" up to Reg. $139.99 Reg. $6.49 MILW-651930 MILW-48017027 (5/8 TPI) 25% $11995 $595 Milwaukee DeWalt 10pc Reciprocating Saw Save Orbital Action Reciprocating Blade Set • 15 amp Motor $50 Reg. $34.99 • 1 1/4" Stroke, 0-2800 SPM DEW-DW4898 • Anti-vibration technology • Variable speed at trigger and dial 95 • Quick blade change $16 1/2 Reg. $249.99 MILW-653821 PRICE $19995 1 DeWalt 10" Wet Tile Saw DeWalt 4 /2" Wet/Dry Includes Stand 1 Masonry Saw • 15 amp Motor, 1 /2HP HOT • 24" Ripping capacity DEAL • 12.5 amp Motor & 18" diagonal • For granite, porcelain, • Lightweight, only 69 lbs concrete and stone • Plunge feature • 3cm Cutting depth Reg. $1299.99 • Includes 13' DEW-D24000 water Line 95 Reg. $229.99 $799 DEW-DWC860W 95 Save $169 Save $500 Feb 2011 $60 31 Powertools INVENTORY BLOWOUT Sorry! No Rainchecks Selection Varies By Store Makita 5" Angle Grinder SJS Clutch Overload Protection 1 • 12 amp Motor, 11,000 RPM 4 /2" Angle Grinder • Lock-on trigger Reg. $164.99 • 6.5 amp Motor MAK-GA5020C Reg. $79.99 Save MILW-613033 95 $20 $119 $6995 Save $45 Feb 17th To 19th $5995 Makita Straight 5" Angle Grinder Metal Shear Save • 10 amp Motor • 2.3 amp Motor • Lock-on trigger Save • 16 Gauge capacity mild steel $80 • Slim motor housing $30 • 18 Gauge capacity stainless steel for easy palm grip Reg. $369.99 Reg. $129.99 MAK-JS1660 MILW-612230A $28995 $9995

Hitachi Angle Grinders Milwaukee Deep Cut 1 Portable Band Saw 4 /2" 7 Includes Case And 5 Grinding Discs 4 /8" Cutting Capacity Save • 6 amp Motor, 10,000 RPM • 10.5 amp Motor Reg. $89.99 • 0-420 SFPM $70 HIT-G12SR3 • Variable speed dial & trigger • Includes case 95 Reg. $369.99 $44 MILW-62326N $29995

Save up to 5" $45 Makita 5" Angle Grinder • 11 amp Motor, 10,000 RPM • AC/DC • Lock-on trigger • 10 amp Motor Reg. $149.99 • Lock-on trigger HIT-G13SC2 Reg. $129.99 95 MAK-9005B $109 $11995 Feb 17th To 19th Save 95 $20 $109 Makita 12" Dry Cut Saw Milwaukee 14" Cuts faster, Cleaner and Lasts Longer Than Abrasive Saws Cut-Off Saw • 15 amp Motor Heavy Duty • Mitres 45° left • 15 amp Motor • 60 Tooth carbide tip blade • Heavy duty • 1300 RPM cast iron base • Unique adjustable fence • 5" Pipe cutting capacity • Virtually • Quick release locking vise burr free Reg. $239.99 Reg. $579.99 MILW-617620 MAK-LC1230 Feb 17th To 19th $14995 Save $46995 Save $449 95 32 $90 Feb 2011 $130 Powertools INVENTORY BLOWOUT Sorry! No Rainchecks Selection Varies By Store Milwaukee 5" Random 1 Triton 2 /4 HP Plunge Orbit Sander Save Feb 17th To 19th Variable Speed $15 Router • 3 amp Motor 95 • 13 amp Motor, 8000 - 21,000 RPM • 7000-12,000 OPM $79 • Electronic speed control maintains • Includes constant speed even under load carrying case • Plunge depth can be adjusted from and dust bag the bottom of the router when Reg. $94.99 MILW-602121 mounted in a router table Reg. $294.99 $8995 TRT-MOF001C Save $21995 $75 Bosch Orbital Jigsaw 4 Orbital Action Settings Triton Double Dowelling • 6.5 amp Motor • Toolless blade Save Machine changing • 4.5 Amp motor system $35 • Will simultaneously drill two holes, 32 mm apart • Includes case Reg. $174.99 • Rack & pinion fence adjustment BOB-JS365 • 3 sets of bits supplied Reg. $214.99 95 Feb 17th To 19th TRT-TA500DWL $149 95 Save $13995 $119 $95 1 Bosch Palm Router Bosch 3 /4HP • 5.6 amp Motor, 35000 RPM with soft start Plunge Router • Designed to maintain • 15 amp motor speed under load • Soft start feature • Fast and precise depth Reg. $499.99 adjustment system BOB-1619EVS • Aluminum fixed base Save Reg. $149.99 95 BOB-PR10E $50 $349 Save $9995 $150 Makita 12" Sliding Save Bosch 10" Sliding Mitre Saw $130 Mitre Saw Save • 15 amp Motor with electronic Includes T1B Stand! soft start and speed control • 15 amp Belt driven motor $120 • Double slide system cuts with electric brake up to 15" at 90° • Up front locks for bevel • Quick adjust, double sliding & mitre adjustment fence with increased height • Mitre cuts 47° left • Dual bevel Reg. $729.99 and 46° right MAK-LS1216 • Includes carbide 95 blade, clamp Feb 17th To 19th and dust bag $619 Reg. $749.99 95 BOB-4310T1B $599 $62995 DeWalt 10" Compact Milwaukee 12" Sliding Jobsite Table Saw Includes Stand Mitre Saw Save Save • 15 amp Motor • 15 amp Motor • Digital mitre angle readout $300 • 16" Ripping capacity $80 • 14" Cutting capacity • Rack & pinion fence • Dual mitre rails with • Metal roll cage 3 linear bearings • Weighs 45lbs Reg. $849.95 Reg. $449.99 MILW-695520 DEW-DW745S $36995 $54995

Feb 2011 33 Woodworking INVENTORY BLOWOUT Sorry! No Rainchecks Selection Varies By Store Klingspor Sanding Belts Klingspor Velcro • Cloth backed for durability • Open coat design Sanding Discs prevents loading • Made in Germany • Open coat design 3" x 21" Save prevents loading Reg. $1.59 - $1.89 up to • Stearate coating 31% 5" 8 Hole Discs Save Grit Each 10+ Reg. $0.65 up to 36 - 40 sb-32136 $1.49 $1.29 38% sb-32140 sb-32160 Grit Each 100+ 60 - 120 sb-321120 $1.39 $1.19

dis-v540 40 - 60 dis-v560 49¢ 45¢

dis-v580 3" x 24" Save 80 - 400 dis-v5400 45¢ 40¢ Reg. $1.69 - $2.19 up to 31%

6" 6 Hole Discs Save Grit Each 10+ Reg. $0.74 up to 32% 36 sb-32436 $1.69 $1.49 40 - 60 sb-32440 $1.59 $1.39 Grit Each 100+ sb-32460 sb-32480 dis-v640 80 - 180 sb-324180 $1.49 $1.29 40 - 60 dis-v660 64¢ 60¢ 80 - 400 dis-v680 54¢ 50¢ dis-v6400 4" x 24" Save Reg. $1.89 - $2.29 up to 22% Grit Each 10+ 36 sb-42436 $1.99 $1.79

sb-42440 40 - 80 sb-42480 $1.89 $1.69

sb-424100 100 - 180 sb-424180 $1.69 $1.49

6" x 48" Reg. $9.79 - $9.99 Sia Foam Save Sanding Blocks 33% Grit Each 10+ Reg. $2.99 sb-64840 40 - 320 sb-648320 $8.49 $7.99 36gr. Coarse SIA-T22740036 60gr. Medium SIA-T22740060 100gr. Fine SIA-T22740100 180gr. Superfine SIA-T22740180 $195

34 Feb 2011 Woodworking INVENTORY BLOWOUT Sorry! No Rainchecks Selection Varies By Store Dimar 7pc Brad Point Drill Bit Set 14" Wood • 1/8" - 1/2" Feb 17th To 19th • High quality German Bandsaw 95 made bits with polished • 1 HP, 110V Motor $379 double edge flutes for • Table tilts left 15° exceptionally and right 45° accurate holes • Includes mitre Save Reg. $42.99 gauge and blade DIM-205DS7 1/2 Reg. $419.99 $40 95 KC-1401HD $19 PRICE $39995 Delta Mortising Save 17" Industrial Attachment $48 Improved Design • Sets up Drill Press in minutes • 12.5 amp Motor • Includes 4 • 16 Speeds (240 - 3400 RPM) mortising • 45° Tilting table for angular drilling attachments • 5/8" Chuck, M2 spindle taper and case • Built-in work light Reg. $97.99 KC-118FC DEL-17924 $46995 Feb 17th To 19th $4995 Save 95 $20 $449 Olson 93" Bandsaw Blade 13" Bench Top • 1/4" x 6 Teeth Reg. $18.49 Drill Press Save OLS-14593 With Laser 95 • 7.5 amp, 110V Motor $35 $9 • 16 Speeds (210-3600 RPM) Save • Built-in light 46% • 45° Tilting table • 5/8" Chuck, MT2 spindle taper Reg. $234.99 KC-116C Sanding Belt/Disc Cleaner 95 Clean Your Sandpaper $199 • Use with any type of sandpaper 8" Bench Top 2" x 12" Bar 1.5" x 8.5" Bar Reg. $20.99 Reg. $11.79 Drill Press WI-W1307 WI-W1306 • 2.5 amp 110V Motor • 5 Speeds (620 - 3100 RPM) 95 95 • 45° Tilting table for $14 $7 angular drilling • 1/2" Drill chuck Reg. $86.99 Save KC-108C up to 95 Save 32% $69 $17 Bench Top Belt & Disc Dimar 5pc Universal

Sander Save Feb 17th To 19th Drill Bit Set • 5 amp, 110V Motor Reg. $52.99 • 4" x 36" belt $20 95 DIM-UDBSET6 and 6" disc $109 95 • Belt lifts up to 90° $24 • Adjustable tilting table Reg. $129.99 1/2 KC-705L PRIC $11995 E Feb 2011 35 Woodworking INVENTORY BLOWOUT Sorry! No Rainchecks Selection Varies By Store Dimar 10" x 60T Sawblade • Non-adhesive black coating 10" Cabinet Table Saw • Micro grain carbide teeth Reg. $86.99 Made in • 2HP, 110/220V Motor with DIM-WP1060A Germany magnetic safety switch • 30" T-fence system 95 • Cast iron table $39 • European riving knife Save prevents kick-back Reg. $1059.99 Save 54% GEN-50200RM1 $60 $99995 Dimar 8" Dado Saw Blade Set Aluminum Storage Case • 24T • Includes 14pc shim set Reg. $139.99 DIM-WP824DCL $8995 Save $50 Freud 10" 50T Combination Blade Flexible Roller Stand • Teflon coating resists resin build up • Extends to 50" • Collapses to 14" for easy storage • Titanium carbide teeth 1 • Made in Italy • 9 Steel rollers 1 /2" Reg. $81.99 • 100lb Maximum capacity FRE-LU83R010 Reg. $204.99 95 GEN-50166 $49 Save 95 $32 $189

Feb 17th To 19th Dimar 12" 96T Sawblade 95 • Designed For Two Sided Laminate Veneer $179 • For cutting against the grain Save • Has 10 degree hook angle for $25 exceptional cutting quality Reg. $161.99 DIM-1296TCG 1/2 Excalibur Overarm Dust $7995 PRI Collection System CE • 4" Main boom and 3" inner boom • Heavy duty transparent blade cover Maxwood Wide Base Roller • Fits most 10" Stand table saws Reg. $409.99 • Adjustable height GEN-50EXBC Reg. $31.99 1/2 MW-RSF $37995 $1495 PRICE Save $30 Osborne Mitre Gauge General Clamping Mitre Gauge • Large easy to read index graduations Reg. $75.99 GEN-50140 • Flip stops slide out of the way when not in use 95 • Fits most table saws $29 Reg. $129.99 GEN-50EB3 95 Save $89 $46 Save $40 36 Feb 2011 Woodworking INVENTORY BLOWOUT 1HP Dust Collector Sorry! No Rainchecks Selection Varies By Store • 650 CFM King Canada Universal Power • Includes 1 micron top filter • Precision balanced impeller Tool Workstation • Continous duty rating • 500lbs capacity Save Reg. $314.99 • 2 Quick mount supports $95 GEN-10005M1 • Includes four 110v power 95 outlets and work light $289 Reg. $214.99 KC-K2750 Feb 17th To 19th Save $11995 $35 $279 95 1HP Dust Collector With 1 Freud 10" x 40T Sawblade • General purpose blade Micron Canister Filter • Laser-cut blade body design with anti- • 650 CFM vibration slots and expansion slots • Precision spin-balanced impeller for • Thick micrograin carbide tips smooth operation and minimal noise • Kickback reducing design Reg. $459.99 Compare at $44.99 GEN-10005SCFM1 XX-FRE-TK306 95 95 Save $429 $24 44% Save $30 Freud Blade & Bit Cleaner • Disolves build-up quickly • Powerful, natural solvent 2HP Dust Collector Reg. $9.79 • 1550 CFM FRE-FRESOLV • Includes 2 micron filter bag 95 Save • 42 Gallon bag capacity $4 • Anti-spark impeller 49% • Twin 4" dust ports Reg. $629.99 GEN-10110M1 General 13" Thickness Planer 95 Reg. $769.99 $599 GEN-30010M1 95 Save Feb 17th To 19th $499 $60 $56995 Save Lumber Storage Rack $270 • 6 level multipurpose racking/storage system. • Sturdy steel construction. Reg. $75.99 GEN-99300 $6495 Maxwood 4" X 16" F-Bar Clamp • Cast iron head Feb 17th To 19th • Polished steel rail Save Reg. $12.99 95 MW-BC4X16 $59 21% 49 $6 1/2 1300CFM PRICE Dust Filtration System Reduce Harmful Airborne Dust! • Excellent for professional shops Maxwood Heavy Duty • Includes remote control • 2 Stage 3 speed filtration system Pipe Clamps Save Reg. $479.99 up to GEN-10600M1 • 2 Rubber pads • Metal construction 64% $44995 1/2" 3/4" Reg. $9.79 Reg. $13.99 MW-CP001RP MW-CP002RP Save 95 $30 $3 $495 Feb 2011 37 Woodworking INVENTORY BLOWOUT Sorry! No Rainchecks Selection Varies By Store Freud Portable Router Dimar 3pc Cabinet Door Table System Router Bit Set Save • Fits most routers • 1/2" Shank bits • 18" x 23" Table top 5 • Profiles from 1" to 1 /8" in diameter $45 • Front mounted • Full size C2 carbide tips for better chip ejection power switch • Thick carbide for 10-15 sharpenings • Includes fence and • CNC machined hardened router insert Reg. $314.99 body for vibration FRE-PKG0021 free operation Reg. $84.99 95 Save DIM-WP242132 $249 $65 $3995 JessEm Router Table Fence Kreg Multi Mark • Precision machined anodized aluminum • Dual T track fastening system 1 • 2 /2" Vacuum dust port Measuring Tool Reg. $171.99 • 3-Way Adjustable Rule JES-04100 • Imperial and metric scale 95 Reg. $22.99 KRE-KMA2900 Save $139 $1495 35% Feb 17th To 19th Save Freud 4pc 1/4" Intro 95 $42 Save $129 Router Bit Set $135 Valued Separately at Over $200! JessEm Router Table • Includes flush trim, straight bit, • 36" x 24" top, 36" high Roman ogee and a bearing bit • Full width fence with T track • Includes wooden storage • Ridgid tubular steel stand box and an extra bearing • MDF Laminated top Compare at $184.95 XX-FRE-88104 with bumper edge • 9" x 13" x 3/8" insert plate 95 Reg. $469.99 $49 JES-02400 95 Dimar 5pc Cabinet $399 Feb 17th To 19th Save Save 95 Door Router Bit Set $80 $389 • 1/2" Shaft bits $65 1 3 • Profiles from 1 /2" to 2 /4" in diameter • CNC machined hardened body for Trend Hinge Door vibration free operation Reg. $134.99 DIM-WPSET5A Mortise Kit • For door sizes 95 6' 10" maximum 5 $69 • Hinges 2 /8" to 5" • Includes accessory kit and storage case Reg. $304.99 TRE-HJIGA Dimar Biscuit Jointer Blade $26995 Feb 17th To 19th Carbide Tipped Save 95 • Replacement 100mm 6 Tooth blade Save $55 $249 to fit most major brands Reg. $42.99 30% DIM-100PJSP Trend 10" 3pc $2995 Sawblade Set • 24 Tooth ripping blade • 48 Tooth general Dimar 1000pk #20 Wood purpose blade • 80 Tooth fine cutting blade Biscuits • With aluminum Reg. $29.99 XX-DIM-BJ20 carrying case Reg. $149.99 95 TRE-PSB254PK1 $19 Save 95 Feb 17th To 19th 33% $109 95 Save 38 Feb 2011 $99 $50 Woodworking INVENTORY BLOWOUT Sorry! No Rainchecks Selection Varies By Store Digital Magnetic All Bevel Gauge Save • Large reversible 31% LCD display Turning Chisels • Strong magnets on 3 sides • Accurate to 1/2 Price 0.2 Degrees Reg. $43.99 IGA-35222 $2995 MaxWood 8pc Save Digital Caliper Woodlathe Chuck Kit $72 1 • 3 /2" Self centering chuck • Large LCD display 1 • Includes 2" & 3 /2" bowl jaw set, 1" pin jaw set, • Reads to a maximum of 9.4" wide .75" & 1.5" step internal jaws, case and more • Spring-loaded travel with • Fits 1" x 8" and 3/4" x 16" spindles trigger and easy hold handle Reg. $171.99 • Alloy jaws with chrome finish MW-5105 • Inch, metric and fractional 95 readings with hold function Save • Accurate to 0.1mm $99 Reg. $34.99 28% $2495 Inside IGA-35ID6H Nova Faceplate Rings • Ideal for mounting irregular sized Outside wood and for rough cuts IGA-35OD6H 2" 4" Reg. $23.99 Reg. $42.99 LL-6000 LL-6001 $1195 $2095 1/2 6" Combination Square P With Centre Head & Protractor RICE • Satin chrome finish • Graduated in 8ths, 16ths, 32nds & 64ths Nova Chuck Soft Jaw Set Reg. $39.99 • Fits all Nova chucks IGA-342063 • High quality nylon 95 Save • Can be cut to fit specific needs Reg. $17.99 $29 25% LL-6021 $895 1/2 PRICE Nova Mini Spigot Jaws • Longer jaws for a powerful spigot grip • Great for longer dowel work Reg. $47.99 LL-6026 1/2 6" Digital $2395 PRICE Height Gauge • Hardened stainless Nova Pin Set Chuck Jaws steel beam Reg. $53.99 • Reads inches, metric LL-JSPIN & fractions Save • Hold function & data 95 port output $29 44% Reg. $75.99 IGA-35628 95 Nova Outrigger $49 • Fits DVR, and 1624 lathes Reg. $314.99 Save Save LL-OR3000 95 $165 $26 Feb 2011 $149 39 Dremel INVENTORY BLOWOUT Sorry! No Rainchecks Selection Varies By Store Dremel Multi-Vise™ • Rotates 360° and tilts 50° Dremel 300 Series Kit • Clamps to any surface Bonus Right Angle Attachment 1 up to 2 /2" thick • Includes 40 accessories and • Removable clamping circle cutter attachment Compare at $79.99 jaws create a XX-DRE-300140M stand-alone bar clamp 95 Reg. $47.99 $49 DRE-2500 Save $3495 $30 Feb 17th To 19th Dremel 300 Set & Box 95 Bonus 16" Tool Box Storage Case $29 • Includes flex shaft attachment, detailer grip, sanding/grinding attachments and 31 assorted accessories Save • 5 Year warranty Compare at $104.99 37% XX-DRE-300321 95 $79 Dremel Work Save Station $25 • Turns your rotary tool into a drill press, stationary sander and polisher • Holds tool at 15° increments up to 90° • Telescoping tool stand for flex shaft Reg. $49.99 Dremel Grout Removal DRE-220 Attachment $4495 Save • Multiple slide depth adjustment $10 • 30° Angle for controlled cutting Feb 17th To 19th • Includes 1/16" carbide bit • 1/8" Carbide bit available but sold separately 95 Reg. $34.99 $39 DRE-568 Save $1995 42% Dremel 8200 12V Max Li-Ion Cordless • 360° grip zone • Quick collet lock for fast accessory changes • Includes 28 accessories, 1 Battery & 1 hour charger, and case Reg. $129.99 DRE-8200128 $10995 Feb 17th To 19th Save $9995 $30 Dremel Multi-Max Oscillating Tool Kits Repair. Remodel. Restore. Cordless 12V • 1.5 amp Motor • 10,000-21,000 OPM Li-Ion Version • Includes 2 wood blades, • Includes two batteries scraper blade, hook and and one-hour charger loop pad, sand paper Reg. $179.99 and storage case DRE-830001 Introductory Reg. $119.99 95 Price DRE-630002 $149 95 $109 Feb 17th To 19th Feb 17th To 19th 95 Save Save 95 40 $99 $20 Feb 2011 $40 $139 Outdoor Power Equipment INVENTORY BLOWOUT Sorry! No Rainchecks Selection Varies By Store 3100 PSI Gas Pressure BE 3100 PSI Gas Washer Pressure Washer 7HP PowerEase Engine 7HP PowerEase Engine • 3100 PSI @ 2.1 GPM • 3100 PSI @ 2.3 GPM • Residential rated for 500 - 600 hours • Residential rated for • Chemical injector 500 - 600 hours Reg. $459.99 • Chemical injector BE-P317RX Reg. $459.99 Save BE-3170RWX $41995 $40 $36995

2700 PSI Pressure Save Washer $90 5 HP Honda GC 160 Engine • 2700 PSI @ 2.3 GPM • Residential rated for 500 - 600 hours BE 2500 PSI Pressure • Heavy duty pump • Chemical injector Washer Reg. $549.99 BE-P275HX • 2500 PSI @ 2.1GPM Save • 5HP Honda GC Engine 95 • Residential rated for $529 $20 500 - 600 hours • Heavy duty pump • Chemical injector 4000 PSI Pressure Reg. $549.99 BE-2005 Washer 95 15HP PowerEase Engine $449 • 4000 PSI @ 4.0GPM • Residential rated for Save Save 500 - 600 hours • BE Triplex pump $100 $100 Reg. $1049.99 BE-P4015RX $97995 Feb 17th To 19th $94995 BE 4000 PSI Pressure Washer • 4000 PSI @ 4.0GPM Pressure Washer • 15HP PowerEase Engine • Residential rated for Replacement Pump 500 - 600 hours • 4HP to 7HP • BE Triplex pump • 3100 PSI @ 2.3 GPM Reg. $1049.99 • 3/4" Diameter engine shaft BE-4015RWPK • Includes outlet fittings for m22 95 and quick connect hoses $799 Reg. $179.99 BE-85170005B Save $15995 Feb 17th To 19th Save $14995 $30 $250 3/8" x 50' Pressure Echo 21cc Split Boom Line Trimmer Washer Hose 5 Year Warranty • 4000 PSI max pressure • 21cc Vortex Engine • Non-marring • 30% reduced starting effort • Includes couplers Reg. $109.99 over previous models BE-85238156 • Line Trimmer easily detaches to quickly adapt to become a completely different 95 tool with one of these popular add ons $89 Reg. $349.99 Feb 17th To 19th EC-SRM225SB Save 95 Save $30 $7995 $299 $50 Feb 2011 41 Outdoor Power Equipment INVENTORY BLOWOUT Designers Edge 1200W King Canada 950W Save Aluminum Heater Save Generator $60 • Extruded aluminum housing Compact & Portable • Pull chain switch $19 • 6.8 amp @ 120V AC output and • Includes 1200W halogen 8.3 amp @ 12V DC output heat lamp bulb and • AC and DC circuit breakers 8' power cord • 2 Year warranty and reset buttons for Reg. $98.99 safe operation DES-H12010 Reg. $159.99 KC-KCG950G $6995 $9995 Mr. Heater King Canada 1500W 35,000 BTU Generator Save • 10 amp Output @ 120V Propane Heater • 2.5HP 4 stroke gas engine $100 • Runs up to 12hrs • Low oil shut down on one 20lb tank • 2 x 120V Outlets • Heats up to 800 sq ft • 1 x 12V @ 8 amps DC • Two safety shut-offs Reg. $219.99 Feb 17th To 19th • Voltmeter MH-35LP • Weighs only 26.8kg Save Reg. $299.99 95 95 KC-KCG1500G $179 $70 $149 $19995 Other Mr. Heater Products Up To 40% Off Mr. Heater Big Buddy King Canada 2000W Propane Heater Digital Inverter Generator • Runs up to 110 hours on a standard 20lb tank Great For RVs • 4000 - 18,000 BTU • 4.5HP, 4 stroke air cooled OHV engine • Heats up to 400 sq ft • Provides stable current • CSA Certified to power voltage-sensitive • Shuts off if knocked electronics over or in low oxygen Reg. $629.99 Reg. $219.99 KC-KCG2000I MH-BIGBUDDY 95 95 Feb 17th To 19th Save $499 Save $179 95 $130 $149 $70 BE 6500W Generator BE 2" Water Pump Kit Electric Start Includes 50' Discharge and 25' • 45.8 amps @ 120V, 13HP Save Suction Hoses • 5500W • Max flow 110 GPM Continuous power $330 • 6.5HP PowerEase • 4 x 120V outlets engine • 7 Hours run time Reg. $339.99 @ 100% load BE-WPK2065CM • Auto idle (save fuel, 95 wear and noise) $299 Reg. $929.99 BE-VI6500 Save $59995 $40 Save Nordic Snow Shovels Drain Cleaning Kits up to • Includes hose and nozzle 'Pusher' 'Scoop' • Designed to clean drainpipes, $60 • 21" Wide poly blade • 13.88" Wide big 'O' & other drains • Solid stained ash hanlde poly blade Reg. $21.99 • Rotating head cleans full • Solid stained circle inside your drain pipe GAR-NPP21KD ash hanlde 95 Save Reg. $21.99 and jets itself forward $9 54% GAR-NP139KD With 50' Hose With 100' Hose 95 Reg. $199.99 Reg. $299.99 $9 LA-LP30101 LA-LP30102 95 95 $169 Feb 17th To 19th $259 Feb 17th To 19th $14995 $239 95 42 Feb 2011 INVENTORY BLOWOUT e Sorry! No Rainchecks Selection Varies By Store Tool c• Used Tools & Equipment 6pc File Set re• Display Models Reg. $8.99 Clearant • Missing Parts 49 Cen • Damaged Goods $5 Trade In • Discontinued • Surplus 1/2 Consignment • Out of Box PRICE L197 Buy Out • Old Packaging

45pc Precision Tool Set 103pc Mechanics L197 Reg. $13.99 Socket Set 95 • 1/4" Dr: $8 SAE 5/32 - 9/16" Metric 4mm - 14mm • 3/8" Dr: SAE 1/4 - 1" Metric 6mm- 22mm Reg. $69.99 95 L197 $39 4pc Pliers & Adjustable Wrench Set Reg. $11.99 95 24oz Dead Blow Hammer $7 Reg. $16.99 $995

L197 28pc Go-Through 1/2 Socket Set PRICE L197 Reg. $29.99 $1495 8lb Magnetic Pick-Up Tool Reg. $2.99 L197 $195 3/8" Drive Extendable Ratchet L197 Reg. $16.99 49 Fill-A-Bag Chrome Sockets $8 1/2 PRICE L197 8pc Mini & Long Handled 3/8" & 1/2" Drive Only Up To Plier Set $175 Reg. $25.99 V 95 alue! $12 1/2 PRICE 95 L197 Feb 2011 $8 /bag 43 Safety INVENTORY BLOWOUT Sorry! No Rainchecks Selection Varies By Store U.S. Safety Cambridge B & G String Knit Gloves Clear Safety Goggles Package of 6 Pairs CSA Approved • Great for construction, lawn • Anti-fog work, gardening, household • Distortion-free polycarbonate lenses use, and much more block 99.9% of UVA & UVB rays Reg. $4.99 Reg. $8.99 XX-CRI-05672 USS-12G22521 $249 1/2 $695 PRICE Save Feb 17th To 19th 33% $595 Howard Leight Laser Lite Earplugs Blaze Clear Safety Glasses • 200/box CSA Approved • NRR 32dB • Wrap around styling Save • CSA Class A [L] • 99.9% UV protection • Vibrant colors make use visible • Impact & scratch resistant 28% • Self-adjusting polyurethane foam • Lightweight fits almost every ear Reg. $2.09 Reg. $29.99 USS-12E91001 H OW-LL1 $149 $2495 Tasco Sound Star Earmuff CSA Class A • NRR 25dB • Soft-Seal ear cushions and spring Nascar #20 Tony Stewart stainless steel headband Reg. $26.99 Earplugs TAS-772550 • Officially Licensed NASCAR • NRR 22 dB 95 • Soft, ergonomic pods $22 • Lightweight • Designed for environment with Save Feb 17th To 19th intermittent noise hazards 95 Reg. $7.99 26% $19 XX-CRI-05830020 1/2 $395 PRICE Personal Deluxe 63pc First Aid Kit Save Kuny's PVC Rain Suit • Includes bandaids, pressure dressing, 21% gauze, triangular bandage, burn gel, Full Cut Sizes wet naps, adhesive tape, antiseptic • Heavyweight 0.35mm PVC with mesh vents wipes, latex gloves, survival blanket, Reg. $14.99 KUN-R101L rehydration drink and purified water KUN-R101xL Reg. $18.99 KUN-R1012L 1/2 CFS-N2003 $749 PRICE $1695

Feb 17th To 19th $1495 Basic and level kits also available Watson Tough As Nails Gloves Puncture Resitant • Fully coated nitrile • 3M Thinsulate C40 lining • Size large Reg. $9.99 WG-9N660T $695 Save 30% 44 Feb 2011 Safety INVENTORY BLOWOUT Performance Tool Sorry! No Rainchecks Selection Varies By Store U.S. Safety Dust Masks 12 Volt Mini Spotlight • 5/Pack • Super bright LED Mini Spot Light for • Use against non-toxic/nuisance RV's, Boats, Cars, Trucks and Aircraft dusts not exceeding 15 mg/ Reg. $6.99 WIL-W2376 m3 airborne concentrations Reg. $2.99 $495 USS-15D15ND10H1 Save $149 29% 1/2 PRICE MSA Advantage 200LS 3D LED Flashlight Respirator Kit Batteries Included • Lightweight, superior fit & comfort • Super bright 3 watt LED bulb • Includes half mask, two • Knurled end for grip P100 cartridges and two • Available in: Silver, Blue or Black pairs of safety glasses Reg. $26.99 Reg. $26.99 WIL-W2385 MSA-10048120 95 95 $19 Save $14 Save 26% 44% MSA Cartridges/Filters starting from $6.95 Starrett Barricade Tape 3M Elastomeric Organic Dispenser Vapor & P95 Respirator • Accepts 300' and 1000' rolls • Notch designed to secure loose end of tape • Great for spray painting, lawn and Reg. $6.95 garden pesticides, staining or XX-STAR-BTD1000 Save refinishing decks and 00 hardwood floors, and $1 85% many other applications With purchase of 20 Reg. $47.99 3M-R6211 95 Starrett Caution Barricade $39 Tape • 3" x 300' Reg. $7.95 XX-STAR-RBC300 Save Foam Kneepad $149 81% • Adjustable elastic strap with With purchase of 20 hook and loop fasteners Reg. $6.49 KUN-KPV231 Ergodyne Cooling Bandana's 95 • Evaporative $4 • Activated polymers bring cooling • Tie closure • Simply soak in cold water for Save 10-15 minutes and wear for hours Reg. $3.99 23% ERG-12305 ERG-12306 ERG-12309 Save ERG-12341 ERG-12342 42% 29 Non-Skid Rubbber Kneepad $2 /each • Buckle-style fastening system • Comfortable foam padding Reg. $19.99 Save 40% KUN-KPV237 $1795 All Alta Industries Kneepads

Feb 17th To 19th $1695 Feb 2011 45 kmscarparts.com We can ship to your 604-522-5593 nearest KMS location! Get In On Our 1-800-567-8979 Booking Specials & S Product not stocked in all locations ave! Here's how it works: We have negotiated special discounts on a single huge order from several of our suppliers. We get better pricing and save on shipping, and pass these savings on to you!

A pioneer in hot rod and muscle car steering and suspension, Heidts has come through for us again and is participating in this year's booking specials. (Last year was very successful) The more we buy the deeper the discount. With the price of bodywork, it is often cheaper to replace a box than fix it. We've done our homework and when looking for the best value in step side boxes, Mark-K has our vote. Now, factor in the increased value of a bulk order and a strong Canadian dollar- this is the time to buy a quality made in USA box. Out of season is the time to buy Old Air products! Get in our booking special and save. Old Air sells complete A/C, heating & defrost control systems. Cool in the Summer, warm in the Winter!

kmscarparts.com Now It's Never Too far Gone With Available New Body Panels! POR-15 Tank Repair Kit 1POR-FTRK $8995

POR-15 Metal Ready

Qt Gal 1POR-MRQ 1POR-MRG $1795 $4295

More POR-15 Products Instore!

46 Feb 2011 Call 1-800-567-8979 today for more info Blow Out Parts First Come, First Serve. Below Cost Won't See Pricing Like This Again!! Sorry, No Rainchecks • Special Orders • Discontinued • Clearance • Overstock Reg Sale Reg Sale Autometer Tachometer $141.99 $112.95 61-62 Chevy Windshield Weather Seal $34.99 $23.95 1aut-1690 1FGO-61C795002D 65-72 Chevelle Rear Control Arm Bushing Kit $93.99 $64.95 40 Ford Deluxe Hood Release Handle $47.99 $39.95 1cp-6572cabrr 1FOR-01A8215C 62-63 Nova Upper/Lower Ball Joints $45.00 $23.95 46 Ford Grill Trim (Red) $314.99 $239.95 1CP-FA406, 1CP-FA407 1FOR-51A81701K 67-69 Camaro RT Inner Wheel Housing $74.99 $48.95 32 Ford Rad-Shell Ornament $35.99 $22.95 1DII-1041C 1FOR-8215 67 Chevelle Door Weather Seal $59.99 $33.95 30-48 Ford Speedo Cable $14.99 $10.95 1DII-1418F 1FOR-A17260B 69 GTO Front Valance $269.99 $159.95 Heidts Super-Ride Rotors 5x4.5 $199.99 $99.95 1DII-1529 1HDT-BS009 68-72 El Camino Window Regulator Left $93.99 $55.95 66-67 Mopar Sending Unit B-Body $42.99 $29.95 1DII-1548L 1KEAY-NFG94A 61 Impala Back Up Lense $10.99 $6.95 70-72 Chevelle HeadlinerBLK-Perf $104.99 $72.95 1DII-1714B 1LEG-HL70GH01P 64-67 Chevelle 10” Interior Mirror $29.99 $22.95 63-67 Chevy Upper Control with Off Set $72.99 $55.95 1DII-911366 1MOO-K6104 68 Camaro Park Light Assembly $64.99 $39.95 Chevy LS1 Bell Housing Adapter $678.99 $499.95 1DII-916896 1MOP-871008 69 Camaro Rear Spoiler $124.99 $74.95 57 Chevy Electric Wiper Conversion $240.99 $215.95 1DII-K959 1OCC-C5717508 70 Mustang Park Light Assembly $74.99 $47.95 46 Plymouth electric Wiper Conversion $240.99 $215.95 1DII-L3660H 1OCC-NE4800CP 68-72 Chevelle Arm Rest Black $18.99 $10.95 Ford Wire Wheel Support $29.99 $19.95 1DII-M1040A 1SPD-91065470 70-72 Chevelle Door Handle without Button Kit $46.99 $29.95 62 Ford Truck Door Weather Seal $169.99 $97.95 1DII-M1392 1SRP-20073272 65-68 Mustang Sending Unit $28.99 $14.95 69-70 Mopar Convertable Roof Rail Weather Seal $319.99 $319.95 1DII-T03 1SRP-70142065 69-70 Cougar Felt Kit $189.99 $99.95 66-67 Nova Exterior Door Handle Set $95.99 $57.95 1SRP-80007257 1TRI-3062 96 Celica Air filter $98.99 $74.95 60-72 GM Truck Stainless Steel Hub Cap $129.99 $84.99 1mop-332052 1TRU-6015907 K&N Cone Filter $47.99 $35.95 64-70 Mustang Subframe Connectors $267.99 $134.95 1kn-e1650 1HDT-RM102 4 Soleniod Valve Manifold $324.99 $149.95 32 Ford Front Spreader Bar $79.99 $44.95 cht-avfbx1 1FOR-B5041SS Mopar Disc Brake Kit $879.99 $549.95 32 Ford Rear Spreader Bar $104.99 $64.95 1MBM-D6272P6570 1FOR-B18575SB 63-70 Chevy Truck Disc Brake Kit $799.99 $599.95 68-72 Chevelle Body Mount Kit $69.99 $44.95 1ABS-400 1NRG-34115G 62-67 XBody Disc Brake Kit $749.99 $369.95 Lake Pipe Plug Kit $76.99 $54.95 1MBM-D6267NPVKM 1PAT-1285 10 Or 12 Bolt GM Rear Disc Brake Kit $903.99 $499.95 Ford 'Y' Block Header Flanges $73.99 $49.95 1WYS-WBK2003 1PAT-7869 GM A-F-X Body Disc Brake Kit $992.99 $399.95 Edelbrock SBF 289 Intake Manifold $209.99 $159.95 1WYS-WBK2006 1EDE-2121 GM A-F-X Body 2" Drop Disc Brake Kit $1152.99 $529.95 Flowtech SBC Block Hugger Headers $165.99 $124.95 1WYS-WBK20061 1FLO-11000 GM A-Body 2" Drop Disc Brake Kit $551.99 $299.95 12" Actuator $196.99 $179.95 1WYS-WBK2007 1HOF-LAD12 GM X-Body 2" Drop Disc Brake Kit $551.99 $299.95 Universal Wiper Kit $349.99 $199.95 1WYS-WBK20071 1HOF-WIPER Must II Disc Brake Kit $799.99 $449.95 Steering Column $491.99 $249.95 1MBM-D7478155 1WYS-WB70001 Stainles Steel 48" Heater Hose $109.99 $47.95 Adjustable Power Steering Valve $125.99 $69.95 1HOF-UHH48 1HDT-PS101 70-72 El Camino Gas Tank $225.99 $179.95 AutoLoc Latch Release Dual System $89.99 $39.95 1DII-T35 1HOF-ARM2 67-72 Blazer Carpet Set $359.99 $289.95 14" Smooth Trim Ring $27.99 $15.95 1TRI-53025510 1ACC-KA8201 67-72 GM Truck Floor Mat $127.99 $119.95 15" Chrome Hub Knight Cap $317.99 $189.95 1TRU-6703607 1ACC-KC6020 67-69 Cuda Carpet $324.99 $239.95 15" Chrome Lancer Hub Cap $317.99 $189.95 1TRI-53662501 1ACC-KC6021 72-93 Dodge Truck Carpet $144.99 $124.95 67-71 GM X-Body 4 Link $1649.99 $974.95 1TRI-53600515 1HDT-RC101 74 Dodge Duster Bucket Seat Covers $306.99 $239.95 63-64 GM Truck Front End Rebuild Kit $429.99 $329.95 1PUI-74KSDU10U 1CP-6364SFKPT 39' Ford Blue Dot Taillight $60.99 $29.95 67 Nova Grill $169.99 $109.95 1WYS-WA8149 1DII-M1611 Much more instore! Check kmscarparts.com for details. Autobody Classes Spray Booth Coquitlam only Spray Gun Polishing We Can: Feb 12th Feb 19th • Rent you the booth 9:30 - 1:30 9:30 - 1:30 • Do the work for you Instructor: Bodo R Instructor: Bodo R • Give a private lesson $90 (+Tax) $55 (+Tax) • Teach you in a class *Coquitlam store only 95 *Class registration must be paid $199 /Rental in advance to secure your spot Call 604-522-5593 For Details Used Cars & Trucks Dynacorn Classic Bodies '60 Apache '68 Suburban

Camaro Bodies 1967 Mustang 1967 Coupe, 1969 Coupe & Fastback available Convertible Feb 2011 47 Donate your good used tools Tools For for community rebuilding Disaster around the world! • Clean out the garage or shed and Relief earn brownie points at home! • Get a tax receipt • Help people rebuild their lives

Visit us at kmstools.com Drop off at any KMS store for more details Thank You For Your Generosity! New Kelowna Location Shopping at kmstools.com is about to get easier! Look for the new interactive online flyer Opening Spring 2011 Feb 15th, 2011

Located in Coquitlam 604-395-4134 Pre-book and have it delivered to our Langley Continually Adding or Abbotsford store! to the fleet! Look Online for Rental Rates

KMS Tools Advertising Policy It is our intention to have every advertised item in stock. Occasionally, an advertised item may not be available due to circumstances beyond our control. If this happens, KMS will offer a rain check or sell a similar item at a comparable price. Special Purchases, Bonus items and Limited Quantity purchases may not be subject to the above conditions due to the nature of the promotion, however we make every effort to clearly identify those items within the flyer. Prices are in effect for the month of February, 2011. We reserve the right to limit quantities. In the event of an error, the intended price shall prevail. Lease prices are estimates, before taxes, based on a 36 month term, OAC. Please call for details. KMS TOOLS COQUITLAM KMS TOOLS LANGLEY KMS TOOLS VICTORIA Next to the IKEA store #110, 19860 Langley Bypass 1652 Island Highway Langley, BC V3A 4Y1 Victoria, BC V9B 1H8 Store & Head Office Ph: 604-534-4853 Fax: 604-534-4928 Ph: 250-391-4555 Fax: 250-391-4554 110 Woolridge Street, Toll Free: 1-888-530-6278 Toll Free: 1-877-848-6657 Coquitlam, BC V3K 5V4 Email: [email protected] Email: [email protected] Ph: 604-522-5599 or 1-800-567-8979 Toll Free Mon-Fri 730 to 530 • Sat 900 to 500 Mon-Fri 730 to 530 • Sat 900 to 500 Fax: 604-522-0638 or 1-800-567-3799 Toll Free Closed Sun. Closed Sun. Email: [email protected] Mon-Fri 800 to 600 • Sat 900 to 500 KMS TOOLS ABBOTSFORD KMS TOOLS CAMPBELL RIVER Closed Sun. Off Hwy #1 at Mt. Lehman Exit 1931 Island Highway KMS C.A.R. Parts 30824 South Fraser Way Campbell River, BC V9W 2G3 Ph: 604-522-5593 Fax: 604-522-1381 Abbotsford, BC V2T 6L4 Ph: 250-286-1060 Fax: 250-286-9737 Email: [email protected] Ph: 604-853-5598 Fax: 604-853-5593 Toll Free: 1-888-586-1060 Mon-Fri 800 to 500 • Sat 900 to 500 Toll-Free: 604-856-5988 (Greater Van) Email: [email protected] 30 00 • 00 00 Closed Sun. Email: [email protected] Mon-Fri 7 to 5 Sat 9 to 5 Mon-Fri 730 to 530 • Sat 900 to 500 Closed Sun. KMS Tool Repair Closed Sun. Ph: 604-395-4134 Fax: 604-522-4017 Email: [email protected] KMS TOOLS KAMLOOPS KMS TOOLS RED DEER Mon-Fri 800 to 545 • Sat 900 to 500 Off Trans-Canada Hwy next to Costco Next to Red Deer Mitsubishi Closed Sun. 1780 Versatile Drive 53 Burnt Park Drive, Kamloops, BC V1S 1S2 Red Deer, AB T4P 0J7 KMS DISTRIBUTION LOCATIONS Ph: 250-374-7300 Fax: 250-374-7379 Ph: 403-347-3990 Fax: 403-347-7326 Toll Free: 1-888-KMS-TOOL (567-8665) Toll Free: 1-888-344-3990 Albertson's Building Centre Email: [email protected] Email: [email protected] 1187 Franklin's Gull Rd, Parksville, BC Mon-Fri 800 to 530 • Sat 900 to 500 Mon-Fri 800 to 530 • Sat 900 to 500 Ph: 250-248-6888 • Fax: 250-248-6960 Closed Sun. Closed Sun. Beaver Creek Home Centre 4643 Gertrude St, Port Alberni, BC KMS TOOLS KELOWNA KMS TOOLS Ph: 250-724-1291 • Fax: 250-724-4700 Next to The Packing House Pub EDMONTON NEW 685 Finns Road 14520 111 Ave NW, Location Adam's Tarp & Tool Kelowna, BC V1X 5B7 Edmonton, AB T5M 2P4 170 Trans Canada Hwy, Duncan, BC Ph: 250-765-9665 Fax: 250-765-4318 Ph: 780-455-8665 Fax: 780-455-8661 Ph: 250-748-0108 • Fax: 250-597-0123 Toll Free: 1-888-922-9665 Toll Free: 1-877-655-8665 Email: [email protected] Email: [email protected] For KMS Distribution & 00 30 • 00 00 Mon-Fri 8 to 5 Sat 9 to 5 Mon-Fri 730 to 530 • Sat 900 to 500 Franchise Opportunities Closed Sun. Please Call 1-800-567-8979 Closed Sun.